CMB-SP 3-28 I-C-A-C-A-A

Transcription

1 GRUNDFOS DATA BOOKLET CMB-SP 3-8 I-C-A-C-A-A Grundfos Pump Thank you for your interest in our products Please contact us for more information, or visit our website tel fax BE > THINK > INNOVATE

2 Position Qty. Description 1 CMB-SP 3-8 I-C-A-C-A-A Product No.: The Grundfos CM Booster self-priming pump with PM pressure manager is a compact booster solution for water supply in domestic applications. The pressure booster unit consists of a Grundfos CM self-priming pump and a Grundfos PM pressure manager. The pressure manager allows the pump to start and stop automatically according to demand and protects the pump from dry running. The CM Booster self-priming pump can create a suction lift of up to 8 m, and it is very easy to install. When the booster has been connected to the pipework, just plug it into a socket, and the system is operational. Features compact easy installation self-priming up to 8 m automatic resetting of alarms dry-running protection anti-cycling (leakage detection) maximum continuous operating time. Applications The Grundfos CM Booster self-priming pump with PM pressure manager is mainly used for domestic and light commercial water supply or booster systems. Liquid: Pumped liquid: Water Liquid temperature range:.. 6 C Liquid temperature during operation: C Density: 998. kg/m³ Technical: Speed for pump data: Rated flow: Rated head: Primary shaft seal: Approvals and markings: Curve tolerance: Self-priming: Start pressure: Materials: Pump housing: Impeller: 9 rpm 3 m³/h.5 m AVBE CE ISO996:1 3B 4 m PM1-1.5 bar Stainless steel DIN W.-Nr AISI 34 Stainless steel DIN W.-Nr AISI 34 Printed from Grundfos Product Centre [18..43]

3 Position Qty. Description Rubber: EPDM Installation: Maximum ambient temperature: 55 C Flange standard: WHITWORTH THREAD RP Electrical data: Rated power - P:.5 kw Mains frequency: 5 Hz Rated voltage: 1 x -4 V Maximum current consumption: 3,1-,8 A Rated speed: rpm Enclosure class (IEC 34-5): IP55 Insulation class (IEC 85): F Type of cable plug: SCHUKO Mains cable: 1.5 m Others: Net weight: Gross weight: 13.8 kg 1.8 kg Printed from Grundfos Product Centre [18..43]

4 CMB-SP Hz H [m] CMB-SP 3-8, 1*3 V, 5Hz eta [%] P [W] Q [m³/h] NPSH [m] 5 P P Printed from Grundfos Product Centre [18..43]

5 H [m] CMB-SP 3-8, 1*3 V, 5Hz Q [m³/h] P [W] 5 P P 158 eta [%] NPSH [m] Z W U V t Z1 U1 V1 W1 1 3 Description Value General information: Product name: CMB-SP 3-8 I-C-A-C-A-A Product No: EAN number: Technical: Speed for pump data: 9 rpm Rated flow: 3 m³/h Rated head:.5 m Impellers: 3 Primary shaft seal: AVBE Approvals and markings: CE Curve tolerance: ISO996:1 3B Model: A Self-priming: 4 m Start pressure: PM1-1.5 bar Materials: Pump housing: Stainless steel DIN W.-Nr AISI 34 Impeller: Stainless steel DIN W.-Nr AISI 34 Rubber: EPDM Installation: Maximum ambient temperature: 55 C Flange standard: WHITWORTH THREAD RP Liquid: Pumped liquid: Water Liquid temperature range:.. 6 C Liquid temperature during operation: C Density: 998. kg/m³ Electrical data: Rated power - P:.5 kw Mains frequency: 5 Hz Rated voltage: 1 x -4 V Maximum current consumption: 3,1-,8 A p max system: 1 bar Rated speed: rpm Enclosure class (IEC 34-5): IP55 Insulation class (IEC 85): F Motor protec: TP 11 Type of cable plug: SCHUKO Mains cable: 1.5 m Others: Net weight: 13.8 kg Gross weight: 1.8 kg Motor wiring diagram PM1/PM AUX MAIN V U N L Australian plug: IEC type I, AS/NZS311, 1,5 m Schuko plug: IEC Type E&F, CEE7/7, 1,5 m US plug: IEC type B, NEMA 5-15P, 1,5 m NO PLUG, 1,5 m V U N L L N Z W U V Z1 U1 V1 W1 L N PE Motor wiring diagram AUX Wiring connection model 1 PM1/PM MAIN PE Wiring connection model Printed from Grundfos Product Centre [18..43]

6 CMB-SP Hz cos phi eta CMB-SP kw 1*3 V, 5 Hz I [A] cos phi.8 4. eta I n [rpm] P1 P [kw]. P1 [kw] n Printed from Grundfos Product Centre [18..43]

7 CMB-SP Hz Note! All units are in [mm] unless others are stated. Disclaimer: This simplified dimensional drawing does not show all details. Printed from Grundfos Product Centre [18..43]

8 CMB-SP Hz Motor wiring diagram PM1/PM AUX MAIN 1 V U N L Australian plug: IEC type I, AS/NZS311, 1,5 m Schuko plug: IEC Type E&F, CEE7/7, 1,5 m US plug: IEC type B, NEMA 5-15P, 1,5 m NO PLUG, 1,5 m Z W U Z1 U1 V1 W1 L N V t 3 1 Z W U V Z1 U1 V1 W1 L N PE Wiring connection model 1 PM1/PM Motor wiring diagram AUX MAIN V U N L PE Wiring connection model Note! All units are in [mm] unless others are stated. Printed from Grundfos Product Centre [18..43]

9 Disclaimer: The information about the Grundfos pump in this document may be outdated. Data may be subject to alterations without further notice. Please contact us to verify the data above is still accurate/up-to-date. All information is copyright Grundfos. tel fax