DM 06 MAGNETIC DRIVE CENTRIFUGAL PUMPS
|
|
- Giles Warren
- 5 years ago
- Views:
Transcription
1 DM 6 Product of Italian origin Available in PP-PVDF Below head use No welded seams Max. flow rate from 7 m 3 /h Max head 8, m Extremely easy maintenance Low cost of spare parts No fluid leaks Viscosity up to 1 CPS Available with NPT fittings (on request) OPERATING TEMPERATURES: PP min. +3 C / max +6 C PVDF min. +3 C / max +9 C Continuous operation: YES Warranty: 1 year, according to our general conditions of sale Spare parts: to identify the spare parts check the exploded views provided at the end of the operation and maintenance manual MODEL Kw MOTOR HP MOTOR SIZE RPM MOTOR SPECIFICATIONS DM6,2,3 B3+B 29,37, B3+B 29 THREE-PHASE 23/4 V-/6 HZ 2-POLE (availability single phase motor) efficiency class IE1 protection rating IP - Ambient temperature -3 C + 4 C / ATEX motor available THREE-PHASE 23/4 V-/6 HZ 2-POLE (availability single phase motor) efficiency class IE2 protection rating IP - Ambient temperature -3 C + 4 C / ATEX motor available ATTENTION: technical data for standard motor, for any special design with reference to the pumped fluid contact DEBEM s technical support. Intake connections G 1 f (or DN 2 on request) Delivery connections G 3/4 m (or DN 2 on request) Max. flow rate 7 m 3 /h Max. head 8, m Construction materials PP - PVDF 1/4
2 DM 6 Q (U.S. gpm) Ø81 Ø Ø (m) H H(ft) 6 Ø6 Ø7 Ø (m) NPSH NPSH (ft).3.2 Ø81 Ø7.1.2 Ø6.1 P (kw) Q (m3/h) P(HP) impeller motor,2 Kw (.3 HP) motor,37 Kw (. HP) ø 81mm* up to 1,2 up to 1,8 ø 7 mm up to 1, up to 2 ø 6 mm up to 1,8 up to 2 *standard The curves and performance values refer to pumps spare delivery outlet and water at 2 C, 2 pole motor Hz (29rpm). DEBEM s.r.l. Via Del Bosco, Busto Arsizio (VA) - Italy - ph fax info@debem.it 2/4
3 DM 6 AVAILABLE MATERIAL INSTALLATION POSITIVE SUCTION HEAD PP PVDF DM6 PP/PVDF A DM6 PP/PVDF B C L M E F (Dimensions in mm) N O Ø 146 H G P 4 hole Ø 7 Packing: wooden case - 47 x 23 x 3 cm-weight 8 Kg (the weight only refers to the packaging without the pump in it). MODEL MOTOR SIZE POWER A B C E F G H L M N O P KG PP KG PVDF DM6 IEC 63,2 Kw /4 m (*) 1 f (*) ,7 7 DM6 IEC 71,37 Kw /4 m (*) 1 f (*) , 7,8 DM6 NEMA 6C, Hp /4 m (*) 1 f (*) (*)gas bsp or NPT DEBEM s.r.l. Via Del Bosco, Busto Arsizio (VA) - Italy - ph fax info@debem.it 3/4
4 DM 6 DM COMPOSITION CODE ex. DM6P-SD1BE71 DM6 in PP, Thrust washer standard, O-Ring EPDM, Impeller Ø 81, Connection BSP, Motor flange Mec, Motor Cassing 71 DM6 P- S D 1 B E 71 PUMP MODEL DM6 PUMP BODY P - Polypropylene FC - PVDF +CF THRUST WASHER O-RING IMPELLER CONNECTION MOTOR FLANGE S - Standard (ceramic + PTFE Grafite) D - EPDM V - Viton DM6 1=Ø 81 2=Ø 7 3=Ø 6 * It can be supplied only the pump with American flange for coupling with NEMA motor Attention: when choosing a pump to pair with NEMA motor, the pump will be supplied with the specific flange but not the NEMA motor, which is not covered by our standard supply N - NPT B - BSP E - MEC U* - NEMA DM MOTOR CASSING PRODUCT APPLICATION DEBEM s.r.l. Via Del Bosco, Busto Arsizio (VA) - Italy - ph fax info@debem.it 4/4
5 DM 1 Product of Italian origin Available in PP-PVDF Below head use No welded seams Max. flow rate from 13 m 3 /h Max head 14 m Extremely easy maintenance Low cost of spare parts No fluid leaks Viscosity up to 1 CPS Available with NPT fittings (on request) OPERATING TEMPERATURES: PP min. +3 C / max +6 C PVDF min. +3 C / max +9 C Continuous operation: YES Warranty: 1 year, according to our general conditions of sale Spare parts: to identify the spare parts check the exploded views provided at the end of the operation and maintenance manual MODEL Kw MOTOR HP MOTOR SIZE RPM MOTOR SPECIFICATIONS DM1,,7 B3+B 29,7 1 B3+B 29 THREE-PHASE 23/4 V-/6 HZ 2-POLE (availability single phase motor) efficiency class IE1 protection rating IP - Ambient temperature -3 C + 4 C / ATEX motor available THREE-PHASE 23/4 V-/6 HZ 2-POLE (availability single phase motor) efficiency class IE2 protection rating IP - Ambient temperature -3 C + 4 C / ATEX motor available ATTENTION: technical data for standard motor, for any special design with reference to the pumped fluid contact DEBEM s technical support. Intake connections G 1 f (or DN 2 on request) Delivery connections G 3/4 m (or DN 2 on request) Max. flow rate 13 m 3 /h Max. head 14 m Construction materials PP - PVDF 1/4
6 DM 1 Q (U.S. gpm) Ø Ø8 3 *standard Ø7 2 1 H (m) H(ft) Ø7 Ø8 Ø98 2 (m) NPSH (ft) NPSH Ø Ø8.4.2 Ø7.3.2 (kw) P.1.1 P(HP) Q(m3/h) impeller motor, Kw (.7 HP) motor,7 Kw (1 HP) ø 98mm* fino a 1,1 fino a 1, ø 8 mm fino a 1,6 fino a 2 ø 7 mm fino a 2 fino a 2 *standard The curves and performance values refer to pumps spare delivery outlet and water at 2 C, 2 pole motor Hz (29rpm). DEBEM s.r.l. Via Del Bosco, Busto Arsizio (VA) - Italy - ph fax info@debem.it 2/4
7 DM 1 AVAILABLE MATERIAL INSTALLATION POSITIVE SUCTION HEAD PP PVDF DM1 PP/PVDF A DM1 PP/PVDF B C L M E F (Dimensions in mm) N O Ø 146 H G P 4 hole Ø 7 Packing for pump with, Kw motor: wooden case cm 47 x 23 x 3 weight 8 Kg Packing for pump with,7 Kw motor: wooden case cm 47 x 23 x 3 weight 8 Kg (the weight only refers to the packaging without the pump in it). MODEL MOTOR SIZE POWER A B C E F G H L M N O P KG PP KG PVDF DM1 IEC 71, Kw m (*) 1 1/2 f (*) ,6 9 DM1 IEC 8,7 Kw m (*) 1 1/2 f (*) ,6 11 DM1 NEMA 6C,7 Hp m (*) 1 1/2 f (*) DM1 NEMA 143TC 1, Hp m (*) 1 1/2 f (*) (*)gas bsp or NPT DEBEM s.r.l. Via Del Bosco, Busto Arsizio (VA) - Italy - tel. ph fax info@debem.it 3/4
8 DM 1 DM COMPOSITION CODE ex. DM1P-SD1BE71 DM1 in PP, Thrust washer standard, O-Ring EPDM, Impeller Ø 98, Connection BSP, Motor flange Mec, Motor Cassing 71 DM1 P- S D 1 B E 71 PUMP MODEL DM1 PUMP BODY P - Polypropylene FC - PVDF +CF THRUST WASHER O-RING IMPELLER CONNECTION MOTOR FLANGE S - Standard (ceramic + PTFE Grafite) D - EPDM V - Viton DM1 1=Ø 98 2=Ø 8 3=Ø 7 * It can be supplied only the pump with American flange for coupling with NEMA motor Attention: when choosing a pump to pair with NEMA motor, the pump will be supplied with the specific flange but not the NEMA motor, which is not covered by our standard supply N - NPT B - BSP E - MEC U* - NEMA DM MOTOR CASSING PRODUCT APPLICATION DEBEM s.r.l. Via Del Bosco, Busto Arsizio (VA) - Italy - ph fax info@debem.it 4/4
9 DM 1 Product of Italian origin Available in PP-PVDF Below head use No welded seams Max. flow rate from 23. m 3 /h Max head 2 m Extremely easy maintenance Low cost of spare parts No fluid leaks Viscosity up to 1 CPS Available with NPT fittings (on request) OPERATING TEMPERATURES: PP min. +3 C / max +6 C PVDF min. +3 C / max +9 C Continuous operation: YES Warranty: 1 year, according to our general conditions of sale Spare parts: to identify the spare parts check the exploded views provided at the end of the operation and maintenance manual MODEL Kw MOTOR HP MOTOR SIZE RPM MOTOR SPECIFICATIONS DM1 1, 2 B3+B 29 2,2 3 B3+B 29 TRIFASE V 23 / 4 - / 6 HZ 2 POLI (disponibilità motor monofase) classe di rendimento IE1 protezione IP - Temperatura ambiente -3 C + 4 C / Disponibilità motor ATEX TRIFASE V 23 / 4 - / 6 HZ 2 POLI (disponibilità motor monofase) classe di rendimento IE1 protezione IP - Temperatura ambiente -3 C + 4 C / Disponibilità motor ATEX ATTENTION: technical data for standard motor, for any special design with reference to the pumped fluid contact DEBEM s technical support. Intake connections G 1 f (or DN 2 on request) Delivery connections G 3/4 m (or DN 2 on request) Max. flow rate 23, m 3 /h Max. head 2 m Construction materials PP - PVDF 1/4
10 DM 1 Q (U.S. gpm) Ø Ø Ø H (m) H (ft) 7 6 Ø9 Ø18 Ø123 2 (m) NPSH (ft) NPSH 1 Ø Ø18 Ø (kw) P.1 Q (m3/h) P (HP) impeller motor 1, Kw (2 HP) motor 2,2 Kw (3 HP) ø 123 mm* fino a 1,1 fino a 1,8 ø 18 mm fino a 1,6 fino a 2 ø 9 mm fino a 2 fino a 2 *standard The curves and performance values refer to pumps spare delivery outlet and water at 2 C, 2 pole motor Hz (29rpm). DEBEM s.r.l. Via Del Bosco, Busto Arsizio (VA) - Italy - ph fax info@debem.it 2/4
11 DM 1 AVAILABLE MATERIAL INSTALLATION POSITIVE SUCTION HEAD PP PVDF DM1 PP/PVDF DM1 PP/PVDF A B C L M E (Dimensions in mm) F N O Ø 19 P 4 hole Ø 1, 8.73 H G Packing for pump with 1, Kw motor: wooden case cm 8 x 29 x 41 weight 11 Kg Packing for pump with 2,2 Kw motor: wooden case cm 61 x 29 x 41 weight 12 Kg (the weight only refers to the packaging without the pump in it). MODEL MOTOR SIZE POWER A B C E F G H L M N O P KG PP KG PVDF DM1 IEC 9 1, Kw /4 m (*) 1 1/2 f (*) DM1 IEC 9 2,2 Kw /4 m (*) 1 1/2 f (*) DM1 NEMA 14 TC 3 Hp /4 m (*) 1 1/2 f (*) (*)gas bsp or NPT DEBEM s.r.l. Via Del Bosco, Busto Arsizio (VA) - Italy - tel. ph fax info@debem.it 3/4
12 DM 1 DM COMPOSITION CODE ex. DM1P-SD1BE9 DM1 in PP, Thrust washer standard, O-Ring EPDM, Impeller Ø 123, Connection BSP, Motor flange Mec, Motor Cassing 9 DM1 P- S D 1 B E 9 PUMP MODEL DM1 PUMP BODY P - Polipropilene FC - PVDF +CF THRUST WASHER O-RING IMPELLER CONNECTION MOTOR FLANGE S - Standard (ceramica + PTFE Grafite) D - EPDM V - Viton * It can be supplied only the pump with American flange for coupling with NEMA motor DM1 1=Ø 123 2=Ø 18 3=Ø 9 N - NPT B - BSP E - MEC U* - NEMA DM1 9 MOTOR CASSING PRODUCT APPLICATION DEBEM s.r.l. Via Del Bosco, Busto Arsizio (VA) - Italy - ph fax info@debem.it 4/4
13 DM 3 Product of Italian origin Available in PP-PVDF Below head use No welded seams Max. flow rate from 3 m 3 /h Max head 24 m Extremely easy maintenance Low cost of spare parts No fluid leaks Viscosity up to 1 CPS Available with NPT fittings (on request) OPERATING TEMPERATURES: PP min. +3 C / max +6 C PVDF min. +3 C / max +9 C Continuous operation: YES Warranty: 1 year, according to our general conditions of sale Spare parts: to identify the spare parts check the exploded views provided at the end of the operation and maintenance manual MODEL Kw MOTOR HP MOTOR SIZE RPM MOTOR SPECIFICATIONS DM3 2,2 3 B3+B B3+B 29 4, B3+B 29 THREE-PHASE 23/4 V-/6 HZ 2-POLE (availability single phase motor) efficiency class IE2 protection rating IP - Ambient temperature -3 C + 4 C / ATEX motor available THREE-PHASE 23/4 V-/6 HZ 2-POLE efficiency class IE1 protection rating IP - Ambient temperature -3 C + 4 C THREE-PHASE 23/4 V-/6 HZ 2-POLE efficiency class IE1 protection rating IP - Ambient temperature -3 C + 4 C ATTENTION: technical data for standard motor, for any special design with reference to the pumped fluid contact DEBEM s technical support. Intake connections G 2 f (or DN on request) Delivery connections G 1/4 m (or DN 4 on request) Max. flow rate 3 m 3 /h Max. head 24 m Construction materials PP - PVDF 1/4
14 DM 3 Q (U.S. gpm) Ø134 Ø122 Ø (m) H 2 1 H (ft) Ø11 Ø122 Ø (m) NPSH NPSH (ft) 2. Ø Ø Ø (kw) P.... P (HP) Q(m3/h) impeller motor 2,2 Kw (3 HP) motor 3 Kw (4 HP) motor 4 Kw (. HP) ø 134 mm* fino a 1,1 fino a 1,8 fino a 1,8 ø 122 mm fino a 1,4 fino a 2 fino a 2 ø 11 mm fino a 1,8 fino a 2 fino a 2 *standard The curves and performance values refer to pumps spare delivery outlet and water at 2 C, 2 pole motor Hz (29rpm). DEBEM s.r.l. Via Del Bosco, Busto Arsizio (VA) - Italy - ph fax info@debem.it 2/4
15 DM 3 AVAILABLE MATERIAL INSTALLATION POSITIVE SUCTION HEAD PP PVDF DM3 PP/PVDF A B C DM3 PP/PVDF L M E F (Dimensions in mm) N O Ø 146 H G P 4 hole Ø 7, 1, 7, 7 Packing for pump with 2,2 Kw motor: wooden case cm 61 x 29 x 41 weight 12 Kg Packing for pump with 3 Kw motor: wooden case cm 64 x 29 x 44 weight 13 Kg Packing for pump with 4 Kw motor: wooden case cm 69 x 37 x 48 weight 1 Kg (the weight only refers to the packaging without the pump in it). MODEL MOTOR SIZE POWER A B C E F G H L M N O P KG PP KG PVDF DM3 IEC 9 2,2 Kw /2 m (*) 2 f (*) DM3 IEC 1 3 Kw /2 m (*) 2 f (*) DM3 IEC Kw /2 m (*) 2 f (*) DM3 NEMA 14TC 3 Hp /2 m (*) 2 f (*) DM3 NEMA 184TC Hp /2 m (*) 2 f (*) (*)gas bsp or NPT DEBEM s.r.l. Via Del Bosco, Busto Arsizio (VA) - Italy - tel. ph fax info@debem.it 3/4
16 DM 3 DM COMPOSITION CODE ex. DM3P-SD1BE9 DM3 in PP, Thrust washer standard, O-Ring EPDM, Impeller Ø 134, Connection BSP, Motor flange Mec, Motor Cassing 9 DM3 P- S D 1 B E 9 PUMP MODEL DM3 PUMP BODY P - Polipropilene FC - PVDF +CF THRUST WASHER O-RING IMPELLER CONNECTION MOTOR FLANGE S - Standard (ceramica + PTFE Grafite) D - EPDM V - Viton * It can be supplied only the pump with American flange for coupling with NEMA motor DM3 1=Ø 134 2=Ø 122 3=Ø 11 N - NPT B - BSP E - MEC U* - NEMA DM MOTOR CASSING PRODUCT APPLICATION DEBEM s.r.l. Via Del Bosco, Busto Arsizio (VA) - Italy - ph fax info@debem.it 4/4
DM 06 MAGNETIC DRIVE CENTRIFUGAL PUMPS
DM 6 Product of Italian origin Available in PP-PVDF Below head use No welded seams Max. flow rate from 7 m 3 /h Max head 8, m Extremely easy maintenance Low cost of spare parts No fluid leaks Viscosity
More informationEQUAFLUX 51 PULSATION DAMPENERS
EQUAFLUX 51 Made in Italy product Works with non-lubricated air Runs dry without damage High output and sturdiness Suitable for minimising fl ow pulsations Suitable for minimising vibration during pumping
More informationDEBEM. HORIZONTAL CENTRIFUGAL PUMPS
MB HORIZONTAL CENTRIFUGAL PUMPS Debem manufactured resin-encased horizontal centrifugal pumps are pumps operated by a direct-drive motor (max 3 rpm) for fast fluid transfer and/or drainage with flow rates
More informationARBO. ARBO Magnetic drive pumps. Pompen en Filters b.v. Product group 2.2
ARBO Pompen en Filters b.v. ARBO Magnetic drive pumps Product group 2.2 Product group 2.2 MagPro Working principle Magnetic drive pumps are Seal-less. The driving torque is transmitted by a permanent magnetic
More informationCHEMICAL PUMPS SINCE 1992
CHEMICAL S SINCE 1992 GENERAL CATALOGUE 2017 MAG-DRIVE CENTRIFUGAL S SEAL-LESS MAG DRIVE CENTRIFUGAL S In seal-less magnetic drive centrifugal pumps, the external magnet is directly connected to the motor
More informationUŽSISAKYKITE internetu: telefonu: el.paštu:
UŽSISAKYKITE internetu: www.dominga.lt/eshop telefonu: +3 2322231 el.paštu: info@dominga.lt IM VERTICA CENTRIFUGA PUMPS The IM series of resin-encased vertical centrifugal pumps features high-performance
More informationHorizontal And Vertical Centrifugal Pumps
Horizontal And Vertical Centrifugal Pumps Lip Bellow Type JP-840 Series Horizontal Centrifugal Pumps are driven by a direct-coupled motor (maximum 3,000 rpm). They are especially suitable for the rapid
More informationEH -EHsp SERIES 50 Hz
PRODUCT CATALOG EH -EHsp SERIES 5 Hz HORIZONTAL MULTISTAGE AND SELF-PRIMING PUMPS franklinwater.eu INDEX STAINLESS STEEL HORIZONTAL MULTISTAGE (EH) AND SELF-PRIMING (EHsp) PUMPS... 2 Family curves...3
More informationfranklinwater.eu 50 HZ EH - EHsp SERIES HORIZONTAL MULTISTAGE AND SELF-PRIMING PUMPS
franklinwater.eu 5 HZ EH - EHsp SERIES HORIZONTAL MULTISTAGE AND SELF-PRIMING PUMPS INDEX Stainless Steel Horizontal Multistage (EH) and Self-Priming (EHsp) Pumps 2 Family curves 3 Pump identification
More informationMODEL MAGPRO AM PG 2.2 CENTRIFUGAL PUMPS
MODEL MAGPRO AM M A G N E T I C D R I V E PG 2.2 CENTRIFUGAL PUMPS WORKING PRINCIPLE Magnetic drive pumps are Seal-less. The driving torque is transmitted by a permanent magnetic coupling to an internal
More informationData sheet. KRTF /24XEG-S IE3 Version no.: 3. Operating data. Design. Driver, accessories
Data sheet Item no.: 100 Page: 1 / 5 Operating data Requested flow rate 178.00 US GPM Requested developed head 14.40 ft Pumped medium Water Clean water Not containing chemical and mechanical substances
More informationCHEMICAL PUMPS SINCE 1992
CHEMICAL S SINCE 1992 GENERAL CATALOGUE 2017 MAG-DRIVE TURBINE S SEAL-LESS MAG DRIVE TURBINE S In seal-less magnetic drive turbine pumps, the external magnet is directly connected to the motor shaft and
More informationCHEMICAL PUMPS SINCE 1992 GENERAL CATALOGUE 2018/19
CHEMICAL S SINCE 1992 GENERAL CATALOGUE 2018/19 MAG-DRIVE ROTARY VANE S SEAL-LESS MAG DRIVE VANE S In seal-less magnetic drive vane pumps, the external magnet is directly connected to the motor shaft and
More informationNon-Metallic Seal-less Mag-Drive Pumps
Non-Metallic Seal-less Mag-Drive Pumps Seal-less Mag-Drive Pump Specialists SOLID PP & PVDF Thermoplastic Mag-Drive Pumps Centrifugal, Turbine & Self-Priming From WARRENDER: Advanced design, materials
More informationCP Centrifugal pumps PERFORMANCE RANGE INSTALLATION AND USE APPLICATION LIMITS PATENTS - TRADE MARKS - MODELS CONSTRUCTION AND SAFETY STANDARDS
CP Centrifugal pumps PERFORMANCE RANGE Flow rate up to 900 l/min (54 m³/h) Head up to 74 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid temperature between -10 C and +90 C Ambient temperature
More informationSP SERIES SELF-PRIMING MAG DRIVE
SP SERIES SELF-PRIMING MAG DRIVE spend less time waiting. and more time pumping. year Big on power yet short on energy consumption, the SP Series from Finish Thompson is one of the most versatile and economical
More informationG03 Series. 24 bar (350 psi) for Non-metallic Pump Heads. G03 Shaft-driven with Stainless Steel pump head
G03 Series Maximum Flow Rate: Maximum Pressure: 11.7 l/min (3.1 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads ATEX G03 Shaft-driven with Stainless Steel pump
More informationCentrifugal pumps. PERFORMANCE RANGE Flow rate up to 900 l/min (54 m³/h) Head up to 76 m
CP Centrifugal pumps Clean water Civil use Agricultural use Industrial use PERFORMANCE RANGE Flow rate up to 9 l/min (5 m³/h) Head up to 76 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid
More informationData sheet: Wilo-Multivert MVI 805 (3~400 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI 8 (~ V, EPDM, PN ) Pump curves 89 8 Wilo-Multivert-MVI 8-89 Hz Power Fluid temperature T -...+ C NPSH [m] H[m] 8 8 8 8 88 8 8 8 8 8 8 8 8 η p NPSH 8 8 [l/s] 89 η p [%] Max.
More informationHigh pressure centrifugal pumps
Series description H[ft] 5 5 4 8 Wilo-Multivert-MVIS 6 Hz - North America Q[m³/h] H[m] 5 4 MVIS 5 MVIS MVIS 5 5 4 6Q[US g.p.m.] 8 6 Pump series Wilo-Multivert MVIS 5..,.., 5.. Design Non-self priming multistage
More informationARBO. Pompen en Filters b.v.
ARBO Pompen en Filters b.v. Product group 1.1 Chemical pumps SealPro Applications For all transport or circulation duties of corrosive liquids, even high viscosity, with maximum efficiency. This series
More informationG20 Series. 24 bar (350 psi) for Non-metallic Pump Heads. G20 Close-coupled with Brass pump head ATEX. G20 Version 5 10/16
G20 Series Maximum Flow Rate: Maximum Pressure: 3.8 l/min (1.0 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads ATEX G20 Close-coupled with Brass pump head G21
More informationG10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G1 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 13 bar (15 psi) for Metallic Pump Heads 24 bar (35 psi) for Non-metallic Pump Heads API 674 ATEX G1 with Cast Iron pump head G1 with
More informationG25 Series API bar (350 psi) for Non-metallic Pump Heads. G25 with Cast Iron pump head
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
More information60Hz HORIZONTAL MULTISTAGE PUMPS
6Hz HORIZONTAL MULTISTAGE PUMPS INDEX EH Stainless Steel Horizontal Multistage Pump................................................................ 2 General Product Curves..................................................................................
More informationMaterials of Construction Head materials in PVDF, 316 SS, and PP Ball Valves - Ceramic, and 316 SS Diaphragm - PTFE faced Hypalon.
Pulsafeeder Technology Since 1936, Pulsafeeder has been the global leader in fluids handling technology and innovation in chemical dosing. Pulsafeeder has built a foundation of success with thousands of
More informationUTN-L / UTN-BL II frame
UTN-L / UTN-BL II frame Lined Magnetic Drive Process Centrifugal Pumps UTN-BL 125-80-160 PFA CLOSE COUPLED EXECUTION Plastic and Fluoroplastic Lined Magnetic drive Horizontal - Single Stage - Process Centrifugal
More informationData sheet: Wilo-CronoNorm-NL 150/315-37/4
Data sheet: Wilo-CronoNorm-NL 15/315-37/4 Pump curves 4 8 1 16 4Q/US gpm H/m Wilo-CronoNorm-NL 15/315 H/ft 145 1/min 14 5 Hz 4 55% 6% 65% 7% 75% 78% 8% 1 8% 35 Eff. 84,8% 83,9% 3 8% 1 8% 8,1% 78% 8,8%
More informationG10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10
More informationCompany name: Created by: Phone:
Qty. Description 1 CRE 1-5 A-FJ-A-E-HQQE Date: /3/17 Product No.: On request Note! Product picture may differ from actual product The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor
More informationG03 Mono-Block Series
G03 Mono-Block Series Maximum Flow Rate: 11.7 l/min (3.1 gpm) Maximum Pressure: 103 bar (1500 psi) for Metallic Pump Heads ATEX Mono-Block (G03) Shaft-driven with Stainless Steel pump head Mono-Block (G03)
More informationTender Text. Company name: Created by: Phone: Date: 3/13/2017. Product No.: CRE 5-20 AN-FGJ-A-E-HQQE
Tender Text Product No.: 9685315 CRE 5-2 AN-FGJ-A-E-HQQE Product photo could vary from the actual product Liquid: Pumped liquid: Water Liquid temperature range: -2.. 12 C Liquid temperature during operation:
More informationSCHMITT. product information. Kreiselpumpen. U Pump Series. normal priming, centrifugal pumps with a single mechanical seal.
SCHMITT Kreiselpumpen chemical resistant pumps for corrosive and highly pure media product information U Pump Series normal priming, centrifugal pumps with a single mechanical seal materials: PVDF Description
More information2CP. Twin-impeller pumps PERFORMANCE RANGE INSTALLATION AND USE APPLICATION LIMITS OPTIONALS AVAILABLE ON REQUEST CONSTRUCTION AND SAFETY STANDARDS
2CP Twin-impeller pumps PERFORMANCE RANGE Flow rate up to 40 l/min (27 m³/h) Head up to 112 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid temperature between -10 C and +90 C Ambient temperature
More informationData sheet: Wilo-Multivert MVI 205 (3~400 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI 5 (3~4 V, EPDM, PN 16) Pump curves 4 Wilo-Multivert-MVI - 5 Hz Power Fluid temperature T -15...+1 C 18 17 Max. ambient temperature T 4 C P [kw] NPSH [m] H[m] 14 16 14 1 1
More informationVERTICAL MULTI-STAGE PUMPS
VR SERIES - 6 HZ FEATURES All 316 SS hydraulic components for superior durability, efficiency, and performance over a wide variety of applications Rugged NEMA motor mounting with oversized ball bearings
More informationVERTICAL PUMPS T RANGE
022013 VERTICAL PUMPS surface treatment transfer agitation of chemical tanks cosmetics metallurgy France SIEBEC SAS 9 rue des platanes ZAC Vence Ecoparc 38120 SAINT-ÉGRÈVE England SIEBEC UK Ltd Unit 3
More informationmotor driven metering pumps
motor driven metering pumps DIAPHRAGM ACTUATED TYPE motor driven dosing pumps diaphragm type Welcome to FWT Dosing Systems FWT (Fluid and Water Technology) is a company formed with specialised experts
More informationARBO. ARBO Chemical pumps. Pompen en Filters b.v. DIN-EN ISO 2858 with mechanical seal. Product group 1.0
ARBO Pompen en Filters b.v. ARBO Chemical pumps DIN-EN 22585 - ISO 2858 with mechanical seal Product group 1. ARBO Pompen en Filters b.v. ARBO Chemical pumps DIN-EN 22585-ISO 2558 with mechanical seal
More informationG04 Series. Maximum Flow Rate: 11.2 l/min (2.9 gpm) Maximum Pressure: 200 bar (2900 psi) for Metallic Pump Heads. G04 with Stainless Steel pump head
G04 Series Maximum Flow Rate: 11.2 l/min (2.9 gpm) Maximum Pressure: 200 bar (2900 psi) for Metallic Pump Heads ATEX G04 with Stainless Steel pump head G04 with Brass pump head G04 with Stainless Steel
More informationData sheet: Wilo-Multivert MVI 404 (1~230 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI (1~3 V, EPDM, PN 16) Pump curves Wilo-Multivert-MVI - 5 Hz Power Fluid temperature T -15...+1 C 18 16 Max. ambient temperature T C 1 1 Maximum operating pressure p max 16
More information69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
More informationPrimus 221 offers optimum dosing accuracy and operating convenience. The dosing flow variation is only ± 1,5 %
Product Information Primus 221 The versatile diaphragm dosing pump Primus 221 offers optimum dosing accuracy and operating convenience The dosing flow variation is only ± 1,5 % Primus 221 doses with a
More informationAlloy version available please call for specifications.
Alloy version available please call for specifications. 2 SEAL-LESS MAG-DRIVE PUMP SPECIALISTS From WARRENDER, Ltd. - The Leader in Magnetic Drive Pump Technology: 21st Century Design, Materials and Engineering.
More informationSubmersible. Pumps Motors. 60Hz 8 Submersible Pump. Pumping Solution
Submersible Pumps Motors Hz Submersible Pump Pumping Solution 1 Product data Stainless steel submersible bore well pumps Construction Submersible motor & pumps for deep wells of (DN mm). Sized for connection
More informationEVM. VERTICAL MULTISTAGE ELECTRIC PUMPS in cast iron, AISI 304, AISI 316. Your Life, our Quality. Worldwide. 36 Commercial
Vertical multistage centrifugal electric pumps available in various versions: cast iron (G), AISI 304 stainless steel (), AISI 316 stainless steel (L). APPLICATIONS Civil, industrial, agricultural and
More informationNS Series Non Metallic End-Suction Centrifugal Pumps
Non Metallic End-Suction Centrifugal Pumps GFRPP CFRPVDF MECHANICAL SEAL GLAND PACKING Corrosion Resistant Chemical Pumps Non Metallic End-Suction Centrifugal Pumps GFRPP CFRPVDF MECHANICAL SEAL GLAND
More informationG10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10
More informationF20 Series. Maximum Flow Rate: 1.0 gpm (3.8 l/min) Maximum Pressure: 1500 psi (103 bar) for Metallic Pump Heads
F2 Series Maximum Flow Rate: 1. gpm (3.8 l/min) Maximum Pressure: 15 psi (13 bar) for Metallic Pump Heads F2 Series Performance Capacities Max. Max. Flow Input @ 1 psi (69 bar) Model rpm gpm l/min F2-E
More informationCentrifugal pumps. made of Polypropylene and PVDF for transferring aggressive media like acids and alkalies
Vertical and horizontal centrifugal pumps www.jesspumpen.com Centrifugal pumps made of Polypropylene and PVDF for transferring aggressive media like acids and alkalies Vertical centrifugal pumps of the
More informationMD Series. MD Series Magnetic Drive Pumps. Magnetic Drive Pumps. 1 Year Warranty!
MD Series MD Series Magnetic Drive Pumps Magnetic Drive Pumps 1 Year Warranty! MD Series - MP Range Aquaplus MP range of leak-free compact magnetic drive pumps are our best-seller and are used in medical
More informationPVM/PVMI/PVMX VERTICAL MULTISTAGE CENTRIFUGAL PUMPS
PVM/PVMI/PVMX High hydraulic efficiency, Motor designed according to EN regulations IE3 MOTOR PVM, PVMI and PVMX are non selfpriming vertical multi-stage pumps, with Victaulic or flanged fittings with
More informationHigh Pressure Centrifugal Pumps Product Overview
High Pressure Centrifugal Pumps Product Overview High Pressure Centrifugal Pumps Product Overview Wilo-Economy MHI Duty chart H[m] 6 5 4 Wilo-Economy-MHI 5 Hz Non self-priming pumps for: Water supply and
More informationmotor driven metering pumps
motor driven metering pumps DIAPHRAGM ACTUATED TYPE motor driven dosing pumps diaphragm type Welcome to FWT Dosing Systems FWT (Fluid and Water Technology) is a company formed with specialised experts
More informationData sheet. Etaline GN /1852 G10 Version no.: 1 Inline pump. Operating data. Design. Requested developed head m
Data sheet Item no.: 2600 Page: 1 / 5 Operating data Requested flow rate 40.00 m ³/h Actual flow rate 40.00 m ³/h Requested developed head 68.00 m Actual developed head 68.00 m Pumped medium Water Efficiency
More informationELADOS EMP IV E00 Diaphragm Pump type
ELADOS EMP IV E00 Diaphragm Pump type 01400 02100 Single phase motor with winding protection, standard Plastic external housing, metal internal housing High delivery capacity at low number of strokes Safety
More information3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 MEI INDEX SPECIFICATIONS 5 PERFORMANCE CURVE 32 6 PERFORMANCE CURVE 32 7 PERFORMANCE CURVE 320 8 PERFORMANCE
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 CONSTRUCTIONS 301 CONSTRUCTIONS 302 MECHANICAL SEAL 303 COUNTERFLANGE 304
CONTENTS Page - SPECIFICATIONS 200 PUMP SPECIFICATION 200 TYPE KEY 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CURVE 3 ( 3-4-5-6 impellers ) 204 PERFORMANCE CURVE 3 ( 7-8-9 impellers ) 205
More informationMECAIR 600/700 SERIES FLANGED VALVES CLEAN AIR SOLUTIONS PRODUCT LEAFLET
600/700 SERIES CLEAN AIR SOLUTIONS CONSTRUCTION FEATURES VALVE COVER BODY PILOT DIAPHRAGM BOLTS AND SCREWS DIAPHRAGM BACKING DISK DIAPHRAGM SPRING Diecast aluminium (anodised) Diecast aluminium (anodised)
More informationUTN-L / UTN-BL I frame
UTN-L / UTN-BL I frame Lined Magnetic Drive Process Centrifugal Pumps UTN-BL PFA CLOSE COUPLED EXECUTION Plastic and Fluoroplastic Lined Magnetic drive Horizontal - Single Stage - Process Centrifugal pumps
More informationCorrosion Resistant Fiberglass Submersible Pumps. EU product Made in Italy
EU product Made in Italy Corrosion Resistant Fiberglass Submersible Pumps ARGALSUB - SUBMERSIBLE PUMPS IN COMPOSITES Argal proposes in this catalog its new range of submersible pumps made in Fiber Reinforced
More informationHEAVY DUTY CONSTRUCTION
50Hz SATURN Fiberglass reinforced pumps ZMS ZGS HEAVY DUTY CONSTRUCTION 2 SATURN Argal fiberglass reinforced pumps range ARGAL SATURN chemical pump series consists of single-stage, horizontal axis centrifuges
More informationSanitary Pumps Type F 560 S Version with bearing flange
Sanitary Pumps Type F 560 S Version with bearing flange Recommended for transferring Thin to highly viscous, even pasty, still free flowing substances. Typical applications A pump designed to meet the
More informationGlass tube flowmeters Series 6000 Variable area flowmeter for liquids and gases
Glass tube flowmeters Series 6000 Variable area flowmeter for liquids and gases Easy installation Local indication by means of direct reading Low pressure drop Scales directly in l/h, m 3 /h, kg/h, l/min,
More informationmotor driven metering pumps
motor driven metering pumps DIAPHRAGM ACTUATED TYPE www.fwtsystems.it motor driven dosing pumps diaphragm type Welcome to FWT Dosing Systems FWT (Fluid and Water Technology) is a company formed with specialised
More informationVERTICAL MULTI-STAGE PUMPS
VR SERIES - 6 HZ FEATURES All 316 stainless steel hydraulic components for superior durability, efficiency, and performance over a wide variety of applications Rugged NEMA motor mounting with oversized
More information103 bar (1500 psi) for Metallic Pump Heads
G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 13 bar (15 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Brass pump head G35
More informationTPE N-A-F-A-GQQE
GRUNDFOS DATA BOOKLET TPE2 65-15-N-A-F-A-GQQE Grundfos pump 98438388 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/tpe/98438388/tpe2-65-15-n-a-f-a-gqqe.html
More information2CP Twin-impeller pumps
2CP Twin-impeller pumps PERFORMANCE RANGE Flow rate up to 450 l/min (27 m³/h) Head up to 112 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid temperature between -10 C and +90 C (up to +40
More informationCMB-SP 3-28 I-C-A-C-A-A
GRUNDFOS DATA BOOKLET CMB-SP 3-8 I-C-A-C-A-A Grundfos Pump 9857564 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbsp/9857564/cmb-sp-3-8-i-c-a-c-a-a.html
More informationUNIT TAG: TYPE OF SERVICE: SUBMITTED BY: APPROVED BY: ORDER NO.: UP B5. Circulator pumps. Motor Data Flow: Head: Efficiency: Pump Data
Submittal Data PROJECT: REPRESENTATIVE: ENGINEER: CONTRACTOR: UNIT TAG: TYPE OF SERVICE: SUBMITTED BY: APPROVED BY: ORDER NO.: UP 15-18 B5 Circulator pumps QUANTITY: DATE: DATE: DATE: Product photo could
More informationEVOTRON SAN WET ROTOR ELECTRONIC CIRCULATORS TECHNICAL DATA
EVOTRON SAN TECNICAL DATA Operating range: from, -, m3/h with head of up to metres. Pumped liquid temperature range: from - C to + C. Working pressure: bar ( kpa). Protection class: IP X. Insulation class:
More information3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 PERFORMANCE CURVE 32-125 5 PERFORMANCE CURVE 32-6 PERFORMANCE CURVE 32-0 7 PERFORMANCE CURVE 40-125 8 PERFORMANCE
More informationfranklinwater.com 50 Hz VR SERIES Vertical Multi-Stage Pumps
franklinwater.com 5 Hz VR SERIES Vertical Multi-Stage Pumps 5 HZ VR SERIES VERTICAL MULTI-STAGE PUMPS Features 2 Applications 2 Pump Specifications Counter-Flange Kits Motor Specifications 4 Ordering
More informationELECTRIC SUBMERSIBLE PUMPS SEMISOM/80
Electric pumps for professional applications to convey sewage water, entirely designed and manufactured in our Italian facility. APPLICATION PERFORMANCE RANGE To convey waste and sewage water from septic
More informationMatrix_Techdata_SS_V14
Matrix_Techdata_SS_V4 CONTENTS V4 SPECIFICATIONS Page Features & Applications Typical Exploded View Pump & Motor Specifications Selection Chart / Type key 3 Selection Chart 4 PERFORMANCE CURVES Performance
More informationEVM. VERTICAL MULTISTAGE ELECTRIC PUMPS in cast iron, AISI 304, AISI 316. Your Life, our Quality. Worldwide. 36 Commercial
Vertical multistage centrifugal electric pumps available in various versions: cast iron (G), AISI 304 stainless steel (), AISI 316 stainless steel (L). APPLICATIONS Civil, industrial, agricultural and
More informationSample gas pumps P2.x ATEX
Gas Analysis Sample gas pumps P2.x ATEX Even in explosive systems in the chemical industry, petrochemistry or biochemistry, gas analysis is key for safe operation. Many of the analysis processes used in
More informationData sheet. Page: 1 / 5. ETL GGSAV11D BKSBIE3 Inline pump. Operating data. Design
Data sheet Page: 1 / 5 Operating data Requested flow rate Operating data determined for maximum inlet pressure Requested developed head 15.00 m Pumped medium Ambient air temperature 20.0 C Fluid temperature
More informationAL-RED. Stainless steel centrifugal pumps
AL-RED Stainless steel centrifugal pumps AL-RED -4 Pump body: stainless steel AISI 304 Impeller: stainless steel AISI 304 Shaft: stainless steel AISI 431 AL-RED -6 Pump body: stainless steel AISI 316L
More informationCMB-SP 5-28 I-C-A-C-B-A
GRUNDFOS DATA BOOKLET CMB-SP 5-28 I-C-A-C-B-A Grundfos pump 9857579 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbsp/9857579/cmb-sp-5-28-i-c-a-c-b-a.html
More information1SV (e-sv) 60 Hz 3500 RPM
DIMENSIONS AND ENGINEERING PAGE 31 CONSTRUCTION: 34 STAINLESS STEEL NOMINAL FLOW: 9 GPM CAPACITIES: 2-12 GALLONS PER MINUTE HEADS: 13 372 PSI TDH STAGING: 2 3 MINIMUM FLOW: 2 GPM MAXIMUM WORKING 36 PSI
More informationWINNER SUBMERSIBLE MULTISTAGE PUMPS EPA
CONTENTS SPECIFICATIONS Page Features & Applications 100 E xploded View 101 Pump & Motor Specifications 102 Selection Charts 103, 104 Type key 105 PERFORMANCE CURVES Performance Curve 4N1 200 Performance
More informationMMI L STAINLESS STEEL CENTRIFUGAL PUMPS Clean or slightly muddy liquids Corrosive fluids - Acids - Solvents OPERATING RANGES APPLICATIONS
OPERATING RANGES Flow rates of up to: m /h Manometric head of up to: mcl Max. operating pressure: / bar Temperature range: - C to + C DN (nominal diameter) of ports: Male Max. viscosity: cst MMI L STAINLESS
More informationGRUNDFOS PRODUCT GUIDE DMH. Dosing pumps
GRUNDFOS PRODUCT GUIDE Dosing pumps Contents Features and benefits 3 Performance range 4 Pump selection options 36 Pumped liquids List of pumped liquids 39 Identification Type key 7 Functions Functional
More informationCMB-SP 1-54 I-C-A-C-C-A
GRUNDFOS DATA BOOKLET CMB-SP 1-54 I-C-A-C-C-A Grundfos pump 98507610 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbsp/98507610/cmb-sp-1-54-i-c-a-c-c-a.html
More informationCompany name: Created by: Phone:
Position Qty. Description 1 TP 8-/2 A-F-A-BQQE Date: 29/1/18 Product No.: 9618724 Single-stage, close-coupled, volute pump with in-line suction and discharge ports of identical diameter. The pump is of
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL 303 BEARINGS 304 FITTINGS 305
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 3 ( 3-4-5-6 IMPELLERS ) 205 PERFORMANCE CURVE 3 ( 7-8-9 IMPELLERS
More informationG15 Series API bar (2500 psi) for Metallic Pump Heads. G15 for horizontal installations shown with Stainless Steel pump head.
G15 Series Maximum Flow Rate: Maximum Pressure: 58.7 l/min (15.5 gpm) 172 bar (2500 psi) for Metallic Pump Heads API 674 ATEX G15 for horizontal installations shown with Stainless Steel pump head. G15
More informationF/G-20 Series. Up to 1.0 gpm (3.8 l/min) f/g-20 hydra-cell diaphragm pump
f/g-20 hydra-cell diaphragm pump F/G-20 Series Up to 1.0 gpm (3.8 l/min) F/G-22 with Pump/Motor Adapter for coupling to NEMA C-Face and IEC B5 Flange motors F/G-20 hollow shaft for close coupling with
More informationInline Pumps. Product review. Wilo-VeroLine-IPL. Single-head pumps: Single stage inline, flanged, long coupled, mechanical sealed dry rotor pump
Product review North America Duty charts 7 RPM - Hz - North America 9 IPL. 7 IPL IPL. IPL IPL. RPM - Hz - North America IPL. IPL IPL. IPL Single-head pumps: Single stage inline, flanged, long coupled,
More informationCompany name: Created by: Phone:
Position Qty. Description 1 TP -42/2 A-F-A-BQQE Date: 26/1/218 Product No.: 9874287 Single-stage, close-coupled, volute pump with in-line suction and discharge ports of identical diameter. The pump is
More informationTPE N-A-F-I-BUBE
GRUNDFOS DATA BOOKLET TPE2 50-200-N-A-F-I-BUBE Grundfos pump 98416629 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/tpe3ni/98416629/tpe2-50-200-n-a-f-i-bube.html
More informationData sheet. Etaline GN /3002 G11 Version no.: 1 Inline pump. Operating data. Design. Clean water. Efficiency 61.6 % 20.0 C.
Data sheet Item no.: 1900 Page: 1 / 5 Operating data Pumped medium Water Actual flow rate 72.19 m ³/h Operating data determined for maximum inlet pressure Actual developed head 70.26 m Clean water Efficiency
More information1SV (e-sv) 50 Hz 2900 RPM
DIMENSIONS AND ENGINEERING PAGE 37 CONSTRUCTION: 34 STAINLESS STEEL NOMINAL FLOW: 9 GPM CAPACITIES: 2-12 GALLONS PER MINUTE HEADS: 13 372 PSI TDH STAGING: 2 3 MINIMUM FLOW: 2 GPM MAXIMUM WORKING 36 PSI
More informationTPE N-A-F-A-GQQE
GRUNDFOS DATA BOOKLET TPE2 1-15-N-A-F-A-GQQE Grundfos Pump 98416973 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/tpe/98416973/tpe2-1-15-n-a-f-a-gqqe.html
More informationCTM magnetic drive centrifugal pumps rev 1
CTM magnetic drive centrifugal pumps 2012 rev 1 your reliable pumpchoice With experience from industrial fluid handling and pump manufacture since 1970, we know what you as a customer require from an industrial
More informationSVI Series 2, 4, 8, 16, 33, 46, 66, Hz
60 Hz SVI Series 2, 4, 8, 16, 33, 46, 66, 92 SUBMERSIBLE VERTICAL ELECTRIC PUMPS EQUIPPED WITH IE2/IE3 MOTORS COMPLYING WITH REGULATION (EC) no. 640/2009 Cod. 191002091 Rev ev.b.b Ed.06/2012 SVI SERIES
More information3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page SPECIFICATIONS 0 PERFORMANCE RANGE and SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 MEI INDEX SPECIFICATIONS 5 PERFORMANCE CURVE 32 6 PERFORMANCE CURVE 32 7 PERFORMANCE
More informationFlygt /181. Parts List
Flygt 057.09/8 Parts List Table of Contents Table of Contents Introduction... Purpose of this manual... Disclaimer... Data for ordering spare parts... Specially approved products... Qualification of personnel...
More information