MMI L STAINLESS STEEL CENTRIFUGAL PUMPS Clean or slightly muddy liquids Corrosive fluids - Acids - Solvents OPERATING RANGES APPLICATIONS
|
|
- Augusta Griffin
- 5 years ago
- Views:
Transcription
1 OPERATING RANGES Flow rates of up to: m /h Manometric head of up to: mcl Max. operating pressure: / bar Temperature range: - C to + C DN (nominal diameter) of ports: Male Max. viscosity: cst MMI L STAINLESS STEEL CENTRIFUGAL PUMPS Clean or slightly muddy liquids Corrosive fluids - Acids - Solvents Closed impellers APPLICATIONS Hm Opened impellers Pumping of clean or slightly muddy liquids in the industrial and effluent treatment sectors. All services in the process environment, unloading, abstraction and transfer of chemical products in a wide variety of fields including chemicals, petrochemicals, pharmaceuticals, nuclear... Qm /h ADVANTAGES High manometric head. Requires little space. Standardised interchangeable motor. Standardised interchangeable mechanical seal. One-piece construction - no alignment. Vertical or horizontal construction. Solid stainless steel construction. Moulded by the lost wax process. N.T. N O -/ENG. - Ed./-
2 MMI DESIGN Hydraulic part - Centrifugal. - Multi-stage ( to stages). - Threaded suction and delivery housing M Gas. - DN PN round flange option - DN ANSI round flange option PN. - Rigid pump - motor coupling. - Sealing via a standardised mechanical seal or a magnetic coupling. Standardised motor Form: B / V Speed: 9 rpm Voltage: - V (Single-phase option) Frequency: Hz (Option Hz) Insulation class: (F) Protection class: IP Option: ADF (EExdIIBT) BASIC CONSTRUCTION Main parts Pump housing & stage Impellers Pump shaft Mechanical seals Seals and gaskets Shaft bearing Lantern ring Material IDENTIFICATION L stainless steel L stainless steel / PPS L stainless steel Depending on pumped liquid AL stainless steel (V) Silicon carbide ENGJL (FGL ) MMI -/,/ T/ Hmt (mcl) Hmt (mcl) HYDRAULIC PRESELECTION RANGE WITH CLOSED IMPELLERS Imp.gpm Qm /h Ql/min Ql/s Imp.gpm Qm /h Ql/min Ql/s 9 9 HYDRAULIC PRESELECTION RANGE WITH OPENED IMPELLERS 9 9 Hft Hft Pump code Port diameter Number of stages Motor power Number of poles ACCESSORIES Supplied for MMI DN PN round flange option DN ANSI round flange option (PN ). RECOMMENDED ACCESSORIES Protective slave switch for motor Shut-off valves Pressure gauge. Motor voltage
3 MMI MMI SECTIONAL DIAGRAMS 99 9 B 99 A 99 A 99 Bearing Option palier option Silicon Carbure carbide silicium 99 99B 99A B C 99 99A 99B A B 99A A A A B B A Support attachments for vertical form Silicon carbide Pattes support pour forme verticale B B - Suction housing L S STEEL - Delivery housing L S STEEL A - Stage housing L S STEEL B - Suction disc L S STEEL - Diffuser L S STEEL A - Closed impeller PPS B - Opened impeller L S STEEL - Drive collar L S STEEL * A - Thrust washer L S STEEL * B - Adjusting washer L S STEEL - Coupling lantern ring ENGJL * A - Suction bearing S STEEL AL (V) * B - Suction bearing SILICON - Shaft sleeve SILICON * - Mechanical seal According to pumped liquid 9 - Housing gasket PTFE - Baseplate / Support STEEL A - Locating snap ring L S STEEL B - Locating snap ring L S STEEL - Assembly stud bolts L S STEEL A - Impeller key L S STEEL B - Coupling key L S STEEL C - Key for drive collar L S STEEL A - Half-coupling sleeve for motor ENGJL B - Half-coupling sleeve for pump ENGJL - Electric motor 99A - Sleeve retaining screw L S STEEL 99B - Shaft bearing retaining screw L S STEEL 99 - Coupling assembly screw STEEL 99A - Motor assembly screw STEEL 99B - Pump assembly screw S STEEL L 99 - Coupling cup-point screw on motor side STEEL 99 - Coupling teat screw on pump side STEEL 99 - Assembly stud bolt nuts S STEEL L 99A - Plain flat stud bolt washers S STEEL L 99 - Coupling screw washer STEEL 99 - Stationary face ring stop pin L S STEEL * Recommended spare parts when purchasing Recommended spare parts
4 MMI HYDRAULIC PERFORMANCE OF MMI WITH CLOSED IMPELLERS (9 RPM) TEST CONDITIONS Motor: pole Frequency: Hz Fluid used: Water Fluid density: Fluid viscosity: mm/s Fluid Temperature: C Hmt (mcl) Imp.gpm 9 Qm /h 9 H t 9 Puissance Absorbed power absorbée (kw) (kw) Qm /h 9 NPSH (mcl) H t Qm /h Q /m Q /
5 MMI HYDRAULIC PERFORMANCE OF MMI WITH OPENED IMPELLERS (9 RPM) TEST CONDITIONS Motor: pole Frequency: Hz Fluid used : Water Fluid density: Fluid viscosity: mm /s Fluid Temperature: C Imp.gpm 9 Hft HMT (mce) Qm /h 9 Absorbed Puissance power absorbée (kw) (kw) Qm /h Hft NPSH Qm /h Ql/min Ql/s 9
6 MMI TYPE U STANDARDISED MECHANICAL SEAL (SINGLE OR DOUBLE) 99 - Delivery housing - Pump shaft - Rotating face ring - Stationary face ring 99 - Stationary face ring stop pin STANDARDISED MECHANICAL SEAL WITH QUENCHING Boîtier-quench Quench box pour for lost circulation water en circulation eau perdue - Delivery housing - Pump shaft - Grease fitting - U mechanical seal - Quench box - Seal ring - Box O-ring 9 - Terminal block 9 MAGNETIC COUPLING 9 9 B 9 - Shroud - Lantern ring brace - Coupling lubrication A - Interior rotor B - Exterior rotor 9 - Coupling sleeve A
7 MMI DIMENSIONAL SPECIFICATIONS Horizontal MMI up to kw A* B L 9/ / /9, M, 9/ 9/9 / H* I H */ */ */9 Standard pump - Threaded " gas ports (/ male) G K D C Detail base 9 J Number of stages M (mm) 9 9 L (mm) 9 Suction and delivery positions * Please contact us with regard to installation conditions. Dimensions of flanges (mm) Ø E Ø F Ø S DN ISO PN/ DN ANSI, 9 Option x ØS DN Motor type Form Power Dimensions (mm) pole - kw A()* A()* B C D G H* I()* I()* J K B, 9 9, 9 S B,, 9 L B,, L B 9, M B 9, (): IP motor (): ADF EEx d II B motor * Dimensions associated with motor, not contractually binding Horizontal MMI up to 9 kw A*, L M, Standard pump Threaded " gas ports (/ male) I* Flanged connector option L Detail base Motor type Form Power Dimensions (mm) pole - kw A() A() I() I() S B, S B, M B 9 M B kw optimised (): IP motor (): ADF EEx d II B motor * May vary according to the motor manufacturer Number of stages M (mm) 9 L (mm) 9 L (mm) 9 9 9
8 MMI DIMENSIONAL SPECIFICATIONS - VERTICAL MMI UP TO KW l* A* B Standard pump Threaded ports " gas (/ male) Flanged connector option Option DN x ØS Motor Form Power Dimensions (mm) type pole kw A()* A()* B I()* I()* B, 9 9 S B, 9 L B, L B 9 9 M B 9 9 (): IP motor (): ADF EEx d II B motor * Dimensions associated with motor, not contractually binding M, Number of stages M (mm) 9 9 Dimensions of flanges (mm) Ø E Ø F Ø S DN ISO PN/ DN ANSI, 9 R 9/ R 9/ R 9/ R 9/9 DIMENSIONAL SPECIFICATIONS - VERTICAL MMI UP TO 9 KW l* A* Standard pump Threaded ports " gas (/ male) Flanged connector option Option DN Motor Form Power Dimensions (mm) type pole kw A()* A()* B I()* I()* S B, 9 S B, M B 9 M B optimized (): IP motor (): ADF EEx d II B motor * Dimensions associated with motor, not contractually binding 9, x ØS Suction and delivery positions M Base, Number of stages M (mm) 9 Dimensions of flanges (mm) Ø E Ø F Ø S DN ISO PN/ DN ANSI, 9 R 9/ R 9/ R 9/ R 9/9 (**) (**) Flanges option from stages
MUV. VERTICAL MULTI-STAGE PUMPS 2 pole - 50 Hz APPLICATIONS ADVANTAGES OPERATING RANGES. Certified
OPERATING RANGES Flow rates of up to: 14 m 3 /h Manometric heads of up to: 137 m CE Max. operating pressure: 1 bar Max. intake pressure: 6 bar Temperature range: 15 to + 9 C Max. ambient temperature: +
More informationMUH. POMPES HORIZONTALES MULTICELLULAIRES 2 pole - 50 Hz OPERATING RANGES APPLICATIONS BENEFITS. Certified
OPERATING RANGES Flow rates of up to: 13 m 3 /h Manometric heads of up to: 67 m CE Max. operating pressure: 1 bar Max. intake pressure: 6 bar Temperature range: 15 to + 9 C Max. ambient temperature: +
More informationMULTI VE THREE-PHASE JETSON
OPERATING RANGES Flow rates of up to: 1 m 3 /h Manometric heads of up to: mce Max. delivery pressure: 1 and bar Max. intake pressure: 1 bar Temperature range: - 1 to +1 C** Max. ambient temperature: +
More informationSINGLE AND DOUBLE IN-LINE PUMPS Heating - Air conditioning - E.C.S.* 50 Hz
RANGE OF APPLICATION Flows up to: m /h Manometric head up to: Maximum working pressure: Temperature range: m bar to C Nominal diameter ports: to MEI* of reference:, *Minimum Efficiency Index LRL JETSON
More informationSingle-stage centrifugal pumps to standards en 733 (nfe 44111) and iso 5199 Industry Agriculture - Heating
OPERATING LIMITS Flow up to : m /h Head up to : mce Service pressure up to : Jusqu à bar* Temperature range : - à +7 C hot water up to : + C * depending on model NOLH Single-stage centrifugal pumps to
More informationSUBMERSIBLE PUMPS EFFLUENT DISPOSAL RANGE 4 poles - 50 Hz
operating limits Flow rates up to: m 3 /h Head up to: m CL Range of temperature of the liquid: +3 to C* Density of the liquid:,5 max. ph of the liquid: 3- Maximum immersion: Maximum particle size: m Ø
More informationMUH. MULTISTAGE HORIZONTAL PUMPS 2 pole - 60 Hz OPERATING LIMITS APPLICATIONS. AdVANTAGES. Flow up to: 16 m 3 /h Head up to:
OPERATING LIMITS Flow up to: 16 m 3 /h Head up to: 9 m Max. operating pressure: 1 bar Max. suction pressure: 6 bar Temperature range: 15 to + 9 C Max. ambient temperature: + C DN of ports: G1 to G1 1/
More informationHigh-pressure pumps Series HP49
High-pressure pumps Series HP49 www.andritz.com/pumps General Description / Application Multi-stage high pressure pumps for water supply, irrigation and industrial applications, for hot and cold water
More informationHigh-pressure pumps Series HP45
High-pressure pumps Series HP45 www.andritz.com/pumps General Description / Application Multi-stage high pressure pumps for water supply, irrigation and industrial applications, for hot and cold water
More informationData sheet. Etaline GN /1852 G10 Version no.: 1 Inline pump. Operating data. Design. Requested developed head m
Data sheet Item no.: 2600 Page: 1 / 5 Operating data Requested flow rate 40.00 m ³/h Actual flow rate 40.00 m ³/h Requested developed head 68.00 m Actual developed head 68.00 m Pumped medium Water Efficiency
More informationVM Series Vertical Multistage Pumps. VM Series Multistage Pumps APPLICATIONS WHY CHOOSE THE VM SERIES MULTISTAGE PUMPS? Experts in water.
Experts in water. APPLICATIONS Pumping of clean, non-aggressive liquids, free of fibres in suspension, suitable for applications such as:- Water supply - domestic, rural & industrial Pressure boosting
More informationCENTRIFUGAL IMMERSION PUMPS
CENTRIFUGAL IMMERSION PUMPS FLUX CENTRIFUGAL IMMERSION PUMPS QUALITY THAT SETS STANDARDS Manufactured at our main plant, these ranges of immersion pumps are the result of extensive product and process
More informationData sheet: Wilo-CronoNorm-NL 150/315-37/4
Data sheet: Wilo-CronoNorm-NL 15/315-37/4 Pump curves 4 8 1 16 4Q/US gpm H/m Wilo-CronoNorm-NL 15/315 H/ft 145 1/min 14 5 Hz 4 55% 6% 65% 7% 75% 78% 8% 1 8% 35 Eff. 84,8% 83,9% 3 8% 1 8% 8,1% 78% 8,8%
More informationTKL. Hydro-Titan Heavy Duty Back Pull-out Water & Process Liquid Pump. Experience In Motion
TKL Hydro-Titan Heavy Duty Back Pull-out Water & Process Liquid Pump Experience In Motion 1 The total cost of a pump includes not only purchase price, but cost of operation: power costs, reliability, ease
More informationSIR INTERMEDIATE LIFTING STATIONS Communal waste water 50 Hz. operating limits. Useful volume up to : S.I.R. 2500
operating limits Useful volume up to : S.I.R. 5 S.I.R. 5 97 L 9 L Ambient temperature : to + 5 C Max.fluid temperature : Particle size passing : 35 C* Ø and mm ND Ø Inlet : mm** Ø Outlet : Ø Vent : mm**
More informationUTN-L / UTN-BL II frame
UTN-L / UTN-BL II frame Lined Magnetic Drive Process Centrifugal Pumps UTN-BL 125-80-160 PFA CLOSE COUPLED EXECUTION Plastic and Fluoroplastic Lined Magnetic drive Horizontal - Single Stage - Process Centrifugal
More information2CDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
More informationData sheet: Wilo-CronoLine-IL 125/210-5,5/4
Data sheet: Wilo-CronoLine-IL 15/1-5,5/ Pump curves -pole, 5 Hz H[m] 18 16 1 1 1 8 6 P [kw] 8 1 16 6 Qmin IL 15/-5,5/ IL 15/1-5,5/ IL 15/19-/ Wilo-CronoLine-IL 15/ - Wilo-CronoLine-IL 15/19 IL 15/-7,5/
More informationData sheet: Wilo-Multivert MVI 805 (3~400 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI 8 (~ V, EPDM, PN ) Pump curves 89 8 Wilo-Multivert-MVI 8-89 Hz Power Fluid temperature T -...+ C NPSH [m] H[m] 8 8 8 8 88 8 8 8 8 8 8 8 8 η p NPSH 8 8 [l/s] 89 η p [%] Max.
More informationData sheet: Wilo-VeroLine-IPL 100/ /4
Data sheet: Wilo-VeroLine-IPL 1/145-1.5/4 Pump curves 4-pole, 5 Hz H[m] Qmin 1 8 Wilo-VeroLine-IPL 1/175 - Wilo-VeroLine-IPL 1/135 Approved fluids (other fluids on request) Heating water (in accordance
More informationData sheet: Wilo-CronoLine-IL 65/160-5,5/2
Data sheet: Wilo-CronoLine-IL 65/16-5,5/2 Pump curves 2-pole, 5 Hz H[m] 45 4 35S 3 25 2 15 1 5 P 2 [kw] 12 2 4 6 8 1 Q[m³/h] 8 4 Qmin IL 65/16-5,5/2 IL 65/17-11/2 IL 65/15-5,5/2 Wilo-CronoLine-IL 65/17
More informationUTN-L / UTN-BL I frame
UTN-L / UTN-BL I frame Lined Magnetic Drive Process Centrifugal Pumps UTN-BL PFA CLOSE COUPLED EXECUTION Plastic and Fluoroplastic Lined Magnetic drive Horizontal - Single Stage - Process Centrifugal pumps
More informationSCHMITT. product information. Kreiselpumpen. U Pump Series. normal priming, centrifugal pumps with a single mechanical seal.
SCHMITT Kreiselpumpen chemical resistant pumps for corrosive and highly pure media product information U Pump Series normal priming, centrifugal pumps with a single mechanical seal materials: PVDF Description
More informationData sheet: Wilo-VeroLine-IPL 65/ /2
Data sheet: Wilo-VeroLine-IPL 65/145-5.5/2 Pump curves 2-pole, 5 Hz H[m] 3 25 15 5 Qmin IPL 65/155-5,5/2 Wilo-VeroLine-IPL 65/155 - Wilo-VeroLine-IPL 65/145 IPL 65/145-5,5/2 IPL65/155-7,5/2 5 3 4 5 6 7
More informationData sheet. Etaline GN /3002 G11 Version no.: 1 Inline pump. Operating data. Design. Clean water. Efficiency 61.6 % 20.0 C.
Data sheet Item no.: 1900 Page: 1 / 5 Operating data Pumped medium Water Actual flow rate 72.19 m ³/h Operating data determined for maximum inlet pressure Actual developed head 70.26 m Clean water Efficiency
More informationData sheet. Page: 1 / 5. ETL GGSAV11D BKSBIE3 Inline pump. Operating data. Design
Data sheet Page: 1 / 5 Operating data Requested flow rate Operating data determined for maximum inlet pressure Requested developed head 15.00 m Pumped medium Ambient air temperature 20.0 C Fluid temperature
More informationPumps Motors ISO 9001 Company
SERIES DATA BOOKLET EndSuction Centrifugal Monoblock Pumps 6 Hz Pumps Motors ISO 91 Company Pumping Solution Contents Endsuction centrifugal monoblock pumps Product data Introduction Applications Features
More informationSide channel pumps PN 16 SOH - SOHB - SOHM. Self-priming centrifugal pumps. Technical description
Side channel pumps PN 16 Self-priming centrifugal pumps SOH - SOHB - SOHM Technical description ATEX certified The SOH side channel pump models are available in a variety of designs. Design base plate
More informationNorm-Centrifugal Pumps PN 10
Norm-Centrifugal Pumps PN 10 Pump dimensions acc. to DIN EN 733 with additional sizes Technical requirements acc. to DIN ISO 9908 Application For pumping pure water, industrial water, sea water, condensate,
More informationVERTICAL MULTISTAGE PUMPS SSV-F Hz
VERTICAL MULTISTAGE PUMPS SSV-F 1-3 - 6-1 - 15 5Hz TABLE OF HYDRAULIC PERFORMANCES AT 5Hz PUMP TYPE RATED POWER H1 Q = DELIVERY l/min 8,3 16,7, 33,3 2 5, 58,3 67 75, m³/h,5 1 1,5 2 2,5 3 3,5,5 kw HP Bar
More informationHermetical Standard Chemical Pump of PTFE / PFA with permanent magnet synchronous motor ISO 2858 / DIN EN 22858
Hermetical Standard Chemical Pump of PTFE / PFA with permanent magnet synchronous motor ISO 2858 / DIN EN 22858 Hermetical Standard Chemical Pump of PTFE / PFA with permanent magnet synchronous motor ISO
More informationClose-coupled pumps Series ES04
Close-coupled pumps Series ES04 www.andritz.com/pumps General Description / Application Pumps of series ES04 are extremely compact units which require very little space. They are particularly suitable
More informationMODEL INFORMATION CANNED MOTOR PUMP TYPE CAM HERMETIC
MODEL INFORMATION CANNED MOTOR PUMP TYPE CAM HERMETIC ... 3... 4 3000 rpm 50 Hz / 3600 rpm 60 Hz... 4... 5... 7 Modular pump / motor systems... 7 Materials...........................................................
More informationSDL i MACERATING SUBMERSIBLE PUMPS
OPERATING LIMITS Flow up to: 6 m 3 /h Head up to: 36 m Max. particle size: 6 mm DN of discharge port: Protection index: 68 SDL i MACERATING SUBMERSIBLE PUMPS Lifting of waste water Commercial pole - 5
More informationHYDRO-TITAN. Heavy duty back pullout water & process liquid pumps
HYDRO-TITAN Heavy duty back pullout water & process liquid pumps Positioned for Reliability The total cost of a pump includes not only purchase price, but cost of operation: power costs, reliability, ease
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
More informationSide Channel Pumps Self-priming, segmental type with verly low NPSH
Side Channel Pumps Self-priming, segmental type with verly low NPSH CEH Sizes 1201 6108, 1202/5 6108/5, 1202/7 6107/7 Technical data Capacity: Delivery head: Speed: max. 35 m³/h max. 354 m max. 1800 1/min
More informationSide channel pumps PN 16 SOH - SOHB. Self-priming centrifugal pumps. Technical description
Side channel pumps PN 16 Self-priming centrifugal pumps SOH - SOHB Technical description Operating data Design Industries Media pumped: Nominal diameter: 1-1 1 /2 Flow rate: 0.3-7.5 m 3 /h Pump head: 5-155
More informationData sheet: Wilo-Multivert MVI 205 (3~400 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI 5 (3~4 V, EPDM, PN 16) Pump curves 4 Wilo-Multivert-MVI - 5 Hz Power Fluid temperature T -15...+1 C 18 17 Max. ambient temperature T 4 C P [kw] NPSH [m] H[m] 14 16 14 1 1
More informationSIHI LPH-X - Liquid Ring Vacuum Pump Two Stage
- Liquid Ring Vacuum Pump Two Stage 45008, 45311, 45316 Pressure Range: Suction Volume: 33 to 1013 mbar 55 to 258 m³/h CONSTRUCTION Sterling SIHI liquid ring vacuum pumps have a simple but robust construction
More informationHigh-pressure In-line Pump. Movitec. 50 Hz. Type Series
High-pressure In-line Pump 50 Hz Type Series Operating data A Characteristic Value low rate Q [m 3 /h] 8,6 Q [l/s] 2,4 Head H [m] 1 luid temperature T [ C] -15 to +120 Operating pressure p [bar] 1) B Characteristic
More informationAPPLICATIONS. Pumping of clear unfilled liquids in housing, agricultural and industrial sectors.
OPERATING LIMITS Flow rates up to: 34 m 3 /h Head up to: 96 m CL Max discharge pressure: 1 bar Max suction pressure: 6 bar Temperature range: - 15 to +11 C* Max ambient temperature: + 5 C ND of ports:
More informationData sheet: Wilo-Multivert MVI 404 (1~230 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI (1~3 V, EPDM, PN 16) Pump curves Wilo-Multivert-MVI - 5 Hz Power Fluid temperature T -15...+1 C 18 16 Max. ambient temperature T C 1 1 Maximum operating pressure p max 16
More informationCentrifugal Immersion Pumps
Centrifugal Immersion Pumps FLUX Centrifugal Immersion Pumps Quality that sets standards. Manufactured at our main plant, these ranges of immersion pumps are the result of extensive product and process
More informationLiquid ring vacuum pumps with magnetic coupling
Liquid ring vacuum pumps with magnetic coupling LPH 75320, LPH 75330, LPH 75340 Pressure range: Suction volume flow: 33 to 1013 mbar 485 to 1615 m³/h CONSTRUCTION TYPE Sterling SIHI liquid ring vacuum
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 32-250/7.56 203 PERFORMANCE CURVES 32-250/9.26 203 PERFORMANCE CURVES
More informationData sheet: Wilo-VeroLine-IPL 65/ /2
Data sheet: Wilo-VeroLine-IPL 65/115-1.5/2 Pump curves 2-pole, 5 Hz H[m] 16 14 12 1 8 6 4 2 1 2 3 4 5 2 4 6 8 1 12 14 16 P 2 [kw] 1,6 1,2,8,4 1 2 3 4 5 η p[%] 8 6 Qmin 4 2 1 2 3 4 5 Dimension drawing 8
More informationCentrifugal pumps. made of Polypropylene and PVDF for transferring aggressive media like acids and alkalies
Vertical and horizontal centrifugal pumps www.jesspumpen.com Centrifugal pumps made of Polypropylene and PVDF for transferring aggressive media like acids and alkalies Vertical centrifugal pumps of the
More informationIndustrial-process. centrifugal pumps.
R Industrial-process centrifugal pumps www.cdrpompe.com CDR pumps - Innovative thinking general R CDR pumps - Innovative thinking since the early 60s The origins of CDR pumps date back to the early 60s
More informationData sheet. Page: 1 / 5 ETN GG A 11GA201502B. Operating data. Design. Requested developed head m. Efficiency 74.
Data sheet Page: 1 / 5 Operating data Requested flow rate 160.00 m³/h Actual flow rate 159.85 m³/h Operating data determined for maximum inlet pressure Actual developed head 20.96 m Requested developed
More informationChemical Magnetic Pumps with PTFE/PFA lining ATEX- and FDA compliant
Chemical Magnetic Pumps with PTFE/PFA lining ATEX- and FDA compliant Highly corrosionresistant pumps for absolute aggressive liquids and dangerous liquids. Energy-efficient pumps and chemical pumps Sustainable
More informationPage - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 65-250 204 PERFORMANCE CURVE 80-160 205 PERFORMANCE CURVE 80-200 206 PERFORMANCE CURVE 80-250
More informationRDLO / RDLO V. Axially Split Volute Casing Pumps. Fields of Application. Bearings. Operating Data. Materials. Design. Shaft Seal. Designation 01 P F
Type Series Booklet 1387.5/2--10 RDLO / RDLO V Axially Split Volute Casing Pumps Fields of Application Waterworks, irrigation and drainage pumping stations, power stations, industrial water supply systems,
More informationHYDROPLUS. BOOSTER PUMPS Range of booster pumps fitted MULTi V, MULTi VS or MULTi-H pumps: Small institutions and industrial use 2 pole - 50 Hz
RANGE OF APPLICATION Flows up to: 8 m /h Manometric head up to: Pression de service maxi : m CE 1-16 bar optional 5 bar* Maximum working pressure: H/V 7 C VS 5 C Ambient temperature: 4 C Nominal diameter
More informationIMMERSON D 4. 4 BOREHOLE PUMPS 2 pole - 50 Hz APPLICATIONS. AdVANTAGES. Flow rates up to: 24m 3 /h Head up to:
OPerating limits Flow rates up to: 24m 3 /h Head up to: 322 m Max. water temperature: + 3 C Max. sand content : 5 g/m 3 DN output opening : G1 1/4 and G2 Depth max. immersion : 2 m D 4 4 BOREHOLE PUMPS
More informationData sheet: Wilo-CronoLine-IL 65/130-4/2
Data sheet: Wilo-CronoLine-IL 65/13-4/2 Pump curves 2-pole, 5 Hz H[m] 32 28 24 I 2 I 16 12 8 4 2 4 6 8 1 5 1 15 2 25 3 Q[l/s] P 2 [kw] Ø 14 6 Ø 127 4L Ø 117 2 Ø 18 2 4 6 8 1 η p[%] Qmin IL 65/14-5,5/2
More informationData sheet: Wilo-CronoLine-IL 50/200-1,5/4
Data sheet: Wilo-CronoLine-IL 5/2-1,5/4 Pump curves 4-pole, 5 Hz H[m] 18 16 14 12 1 8 6 4 2 1 2 3 4 5 4 8 12 Q[l/s] P 2 [kw] Ø 28 1,5 Ø 197 1,,5 1 2 3 4 5 η p[%] Qmin Wilo-CronoLine-IL 5/22 - Wilo-CronoLine-IL
More informationData sheet: Wilo-CronoLine-IL 50/120-2,2/2
Data sheet: Wilo-CronoLine-IL 5/12-2,2/2 Pump curves 2-pole, 5 Hz H[m] 28 24 2 Qmin IL 5/14-3/2 IL 5/13-3/2 Wilo-CronoLine-IL 5/14 - Wilo-CronoLine-IL 5/11 IL 5/14-4/2 Approved fluids (other fluids on
More informationData sheet: Wilo-CronoLine-IL 80/145-1,1/4
Data sheet: Wilo-CronoLine-IL 8/145-1,1/4 Pump curves 4-pole, 5 Hz H[m] 12 1 8 6 4 2 2 4 6 8 1 5 1 15 2 25 3 P 2 [kw] 2, 1,5 Ø 156 1, Ø 144,5 Ø 133 2 4 6 8 1 η p[%] Qmin IL 8/17-2,2/4 IL 8/16-1,5/4 IL
More information3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 PERFORMANCE CURVE 32-125 5 PERFORMANCE CURVE 32-6 PERFORMANCE CURVE 32-0 7 PERFORMANCE CURVE 40-125 8 PERFORMANCE
More informationThe Modular System SIHI ISOchem
The Modular System SIHI ISOchem Description Standard chemical pumps of the SIHI ISOchem range are horizontal single-stage volute casing pumps with dimensions to ISO 2858 / EN 22858. They meet the technical
More informationHorizontal And Vertical Centrifugal Pumps
Horizontal And Vertical Centrifugal Pumps Lip Bellow Type JP-840 Series Horizontal Centrifugal Pumps are driven by a direct-coupled motor (maximum 3,000 rpm). They are especially suitable for the rapid
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL 303 BEARINGS 304 FITTINGS 305
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 3 ( 3-4-5-6 IMPELLERS ) 205 PERFORMANCE CURVE 3 ( 7-8-9 IMPELLERS
More informationPage - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 201 CURVE SPECIFICATIONS 202 PERFORMANCE CHART IDROGO PERFORMANCE CHART IDROGO
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 201 CURVE SPECIFICATIONS 202 PERFORMANCE CHART 40 203 PERFORMANCE CHART 80 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 SECTIONAL VIEW 301
More information50Hz. water solutions. E SerieS DGE DRE GRE APE
Hz water solutions E SerieS DGE DRE GRE APE D a t a b o o k l e t EN water solutions E SerieS DGE DRE GRE APE Hz D a t a b o o k l e t E SERIES E Series General characteristics AISI 4 stainless steel
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
More informationChemical Motor Pump Unit BN
MB / General Pump BN-type motor pump units are normal-priming, singlestage, plastic centrifugal pumps in block design with horizontal axis. Their dimensions and flow rates mainly correspond to DIN/EN.
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 GEOMETRIC TOLERANCES 401 PACKING 402
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 150 203 PERFORMANCE CURVE 200 204 PERFORMANCE CURVE 300 205 PERFORMANCE CURVE 400 206 - CONSTRUCTIONS
More informationData sheet: Wilo-VeroTwin-DPL 65/ /2
Data sheet: Wilo-VeroTwin-DPL 65/175-5.5/2 Pump curves 2-pole - individual operation H[m] 35 3 25 2 Qmin DPL 65/175-5,5/2 Wilo-VeroTwin-DPL 65/175 - Wilo-VeroTwin-DPL 65/165 DPL 65/175-7,5/2 DPL 65/165-5,5/2
More informationRichter Sealless Chemical Magnetic Drive Pumps
Richter Sealless Chemical Magnetic Drive Pumps MDK, MDK-B SAFEGLIDE PLUS dry-run option Corrosion-resistant through PFA Unfilled virgin lining Richter sealless chemical magnetic drive pumps Fields of application
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 CONSTRUCTIONS 301 CONSTRUCTIONS 302 MECHANICAL SEAL 303 COUNTERFLANGE 304
CONTENTS Page - SPECIFICATIONS 200 PUMP SPECIFICATION 200 TYPE KEY 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CURVE 3 ( 3-4-5-6 impellers ) 204 PERFORMANCE CURVE 3 ( 7-8-9 impellers ) 205
More informationElectric submersible pumps SEMISOM for sewage water
40 SEMISOM Electric submersible pumps SEMISOM pplication - To convey waste and sewage water from septic tanks; - To drain rain water; - To pump liquids containing solids and filaments; - To pump sewage
More information- DIMENSIONS AND WEIGHT 400 PUMP MATRIX PUMP DRAWING MATRIX DIMENSION TABLE MATRIX PACKING 403
CONTENTS Page - SPECIFICATIONS 200-201 SELECTION CHART 202 SELECTION CHART TABLE 203 TYPE KEY AND CURVE SPECIFICATIONS 204 PERFORMANCE CURVE 3 ( 2-3-4-5 IMPELLERS ) 205 PERFORMANCE CURVE 3 ( 6-7-8-9 IMPELLERS
More informationTECHNICAL DESCRIPTION
TECHNICAL DESCRIPTION STN-SP are self-priming magnetic driven centrifugal pumps in close-coupled execution. Ideal for safe installation priming from the top of vessels and/or tanks for transferring acids,
More informationSCX-DCX SXM-DXM. SINGLE AND TWIN-HEAD CIRCULATORS Heating and air conditioning Light commercial range 2 Pole - 50 Hz 230 V OPERATING LIMITS
V OPERATING LIMITS Flow up to : m /h Heads up to:, m Max. operating pressure: bar Temperature range : to + C* Max. temperature ambient: + C ND of ports : and * except CXL : - to + C Replace CXL SCX-DCX
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE 201 SELECTION CHART 202 TYPE KEY 203 CURVE SPECIFICATIONS 204 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE 32-250/9.2
More informationXFLO XS SERIES. Single Stage Double Suction Split Casing Centrifugal Pump
XFLO P U M P S XS SERIES Single Stage Double Suction Split Casing Centrifugal Pump General and Construction 1. Applications Waterworks, Irrigation, Drainage pumping stations, Power stations, Industrial
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEALS 303 DIAGRAM AND ELECTRIC CONNECTIONS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 PERFORMANCE CHART A (up to 0.6 kw) 203 PERFORMANCE CHART A (from 0.75 kw up to 1.1 kw) 204 PERFORMANCE CHART A (1.3 kw) 205 PERFORMANCE
More informationCVM. EBARA PUMPS EUROPE S.p.A. MULTISTAGE CENTRIFUGAL PUMPS
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE A (UP TO 0.6 kw) 203 PERFORMANCE CURVE A (FROM 0.75 kw UP TO 1.1 kw) 204 PERFORMANCE CURVE
More informationfranklinwater.com 50 Hz VR SERIES Vertical Multi-Stage Pumps
franklinwater.com 5 Hz VR SERIES Vertical Multi-Stage Pumps 5 HZ VR SERIES VERTICAL MULTI-STAGE PUMPS Features 2 Applications 2 Pump Specifications Counter-Flange Kits Motor Specifications 4 Ordering
More information- CONTENTS SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 2CDX PERFORMANCE CHART 2CDX PERFORMANCE CHART 2CDX
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 70 202 PERFORMANCE CHART 120 203 PERFORMANCE CHART 200 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL
More informationPage - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE DIMENSIONS AND WEIGHT 400 PUMP DRAWING 400 DIMENSION PUMP TABLE 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE R10 205 PERFORMANCE CURVE R13 206 PERFORMANCE CURVE S25 207 PERFORMANCE CURVE S32 208 PERFORMANCE
More informationNJK Series ISO Standard End-Suction Centrifugal Pumps
ISO Standard End-Suction Centrifugal Pumps PVDF CFRPVDF ISO 8 ISO 5199 EN 28 Armour Type Corrosion Resistant Chemical Pumps ISO Standard End-Suction Centrifugal Pumps PVDF CFRPVDF ISO 8 ISO 5199 EN 28
More informationData sheet: Wilo-CronoLine-IL 100/250-5,5/4
Data sheet: Wilo-CronoLine-IL 1/25-5,5/ Pump curves -pole, 5 Hz H[m] 2 2 16 Qmin IL 1/25-5,5/ IL 1/26-7,5/ Wilo-CronoLine-IL 1/27 - Wilo-CronoLine-IL 1/25 IL 1/27-11/ IL 1/26-11/ Approved fluids (other
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 THERMAL INSULATION DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
More informationPage - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING TECHNICAL DATA 500
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE BEST 2 203 PERFORMANCE CURVE BEST 3 203 PERFORMANCE CURVE BEST 4 203 PERFORMANCE CURVE BEST
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 20 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE
More informationMMD. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 65-250 204 PERFORMANCE CURVE 80-160 205 PERFORMANCE CURVE 80-200 206 PERFORMANCE CURVE 80-250
More informationThermoplastic Centrifugal pump, Type NM
Thermoplastic Centrifugal pump, Type NM acc. to DIN 24256, EN 22858 and ISO 2858 Size: 32-125 up to 150-400 Capacity Q: up to 450 m 3 / h Head H: up to 100 m Operating temperature t: PE up to + 70 C PP
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 THERMAL INSULATION 301 MECHANICAL SEAL 302 BEARINGS DIMENSIONS and WEIGHT 400 PUMP 400 PACKING 401
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY amd CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS
More informationData sheet: Wilo-VeroTwin-DPL 40/ /4
Data sheet: Wilo-VeroTwin-DPL 4/13-.2/4 Pump curves 4-pole - individual operation H[m] 8 7 6 4 3 2 1 P 2 [kw],4,2 η p[%] 6 4 2 1 2 3 4 6 7 Qmin Pump curves Wilo-VeroTwin-DPL 4/16 - Wilo-VeroTwin-DPL 4/13
More informationour contribution for Sealless Magnetic Coupled Multistage Centrifugal Pumps Type HZM / HZMR / HZMB environmental protection
Sealless Magnetic Coupled Multistage Centrifugal Pumps Type HZM / HZMR / HZMB our contribution for environmental protection General DICKOW-pumps of series HZM are sealless multistage horizontal centrifugal
More informationPA SERIES END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 THONG FATT JAYA MACHINERY HARDWARE SDN. BHD.
END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 50HZ OR 60HZ PA SERIES APPLICATIONS PA Series pumps can be used for the following services in commercial, residential, agriculture, industrial,
More informationPage - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART COMPACT A 204 PERFORMANCE CHART COMPACT B 205
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART A 204 PERFORMANCE CHART B 205 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEALS 301
More informationMMD 4 Poles. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE MMD4 32-250 205 PERFORMANCE CURVE MMD4 40-250 206 PERFORMANCE CURVE MMD4 50-250 207 PERFORMANCE
More informationThermoplastic Centrifugal Pump Type NMB-S
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33.7 99-0 Fax +49 (0) 57 33.7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Thermoplastic Centrifugal Pump Type NMB-S Suction
More informationUTS HE / UTS-B HE. Metallic Magnetic Drive Process Centrifugal Pumps. UTS-B Close Coupled Execution. HE: High Efficiency. Comply to : 2006/42/CE
UTS HE / UTS-B HE Metallic Magnetic Drive Process Centrifugal Pumps Metallic Magnetic drive Horizontal - Single Stage - Process Centrifugal pumps Materials : AISI 316 (1.4408) Close-coupled and End-suction
More informationARBO. Pompen en Filters b.v.
ARBO Pompen en Filters b.v. Product group 1.1 Chemical pumps SealPro Applications For all transport or circulation duties of corrosive liquids, even high viscosity, with maximum efficiency. This series
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 GEOMETRIC TOLERANCES 401 PACKING 402
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 150 203 PERFORMANCE CURVE 200 204 PERFORMANCE CURVE 300 205 PERFORMANCE
More informationPressure boosting Single pumps
Series description Wilo-Economy MHI Design Non-self-priming multistage pump Application Water supply and Commerce and industry Cooling water circulation systems Washing and sprinkling systems Type key
More information