2CP. Twin-impeller pumps PERFORMANCE RANGE INSTALLATION AND USE APPLICATION LIMITS OPTIONALS AVAILABLE ON REQUEST CONSTRUCTION AND SAFETY STANDARDS

Transcription

1 2CP Twin-impeller pumps PERFORMANCE RANGE Flow rate up to 40 l/min (27 m³/h) Head up to 112 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid temperature between -10 C and +90 C Ambient temperature between -10 C and +40 C Max. working pressure 10 bar (6 bar for 2CP2/130N) Continuous service S1 CONSTRUCTION AND SAFETY STANDARDS EN IEC CEI 2-3 CERTIFICATIONS INSTALLATION AND USE Suitable for use with clean water and liquids that are not chemically aggressive towards the materials from which the pump is made. The high efficiency and adaptability of these pumps to even the most unusual of applications, makes them ideal for use in the domestic, civil and industrial sectors; in particular for the distribution of water in combination with pressure sets, for pressure boosting and in fire-fighting sets. The pump should be installed in an enclosed environment, or at least sheltered from inclement weather. OPTIONALS AVAILABLE ON REQUEST Special mechanical seal Other voltages or 60 Hz frequency IPX class protection for: 2CP32/200, 2CP40/180, 2CP32/210, 2CP40/200 GUARANTEE 2 years subject to terms and conditions 74

2 PERFORMANCE RANGE 0 Hz n= /min HS= 0 m 2CP2/14 2CP2/130N 2CP2/16 2CP32/210 2CP32/200 2CP40/180 2CP40/200 7

3 2CP CHARACTERISTIC CURVES AND PERFORMANCE DATA 0 Hz n= /min HS= 0 m 2CP2/14A 30 2CP2/14B 3 NPSH (metres) Absorbed power P2 (kw) CP2/130N 37 η = 36% CP2/14 2CP2/130N 2CP2/14A 2CP2/14B 2CP2/130N P2 (HP) NPSH (feet) H (feet) MODEL POWER m³/h Q Single-phase Three-phase kw HP l/min CPm 2/130N 2CP 2/130N CPm 2/14B 2CP 2/14B H metres , CPm 2/14A 2CP 2/14A Q = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 9906 Grade 3. 76

4 CHARACTERISTIC CURVES AND PERFORMANCE DATA 0 Hz n= /min HS= 0 m US g.p.m Imp g.p.m. feet NPSH (metres) Absorbed power P2 (kw) CP2/16A 2CP2/16B 2CP2/16C 3 η = 44% C C B B A A l/min m³/h P2 (HP) NPSH (feet) H (feet) MODEL POWER m³/h Q Single-phase Three-phase kw HP l/min CPm 2/16C 2CP 2/16C CPm 2/16B 2CP 2/16B 1. 2 H metres CP 2/16A Q = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 9906 Grade 3. 77

5 2CP CHARACTERISTIC CURVES AND PERFORMANCE DATA 0 Hz n= /min HS= 0 m Absorbed power P2 (kw) NPSH (metres) P2 (HP) NPSH (feet) H (feet) MODEL POWER m³/h Q Three-phase kw HP l/min CP 32/200C H metres 2CP 32/200B Q = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 9906 Grade 3. 78

6 CHARACTERISTIC CURVES AND PERFORMANCE DATA 0 Hz n= /min HS= 0 m Absorbed power P2 (kw) NPSH (metres) P2 (HP) NPSH (feet) H (feet) MODEL POWER m³/h Q Three-phase kw HP l/min CP 32/210B H metres 2CP 32/210A Q = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 9906 Grade 3. 79

7 2CP CHARACTERISTIC CURVES AND PERFORMANCE DATA 0 Hz n= /min HS= 0 m Absorbed power P2 (kw) NPSH (metres) P2 (HP) NPSH (feet) H (feet) MODEL POWER m³/h Q Three-phase kw HP l/min CP 40/180C CP 40/180B. 7. H metres CP 40/180A Q = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 9906 Grade 3. 80

8 CHARACTERISTIC CURVES AND PERFORMANCE DATA 0 Hz n= /min HS= 0 m CP40/200A 2CP40/200B NPSH (metres) Absorbed power P2 (kw) P2 (HP) NPSH (feet) H (feet) MODEL POWER m³/h Q Three-phase kw HP l/min CP 40/200B H metres 2CP 40/200A Q = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 9906 Grade 3. 81

9 2CP 2/130N POS. COMPONENT CONSTRUCTION CHARACTERISTICS 1 PUMP BODY Cast iron, complete with threaded ports in compliance with ISO 228/1 2 BODY BACKPLATE Stainless steel AISI IMPELLERS Stainless steel AISI MOTOR SHAFT Stainless steel EN MECHANICAL SEAL Seal Shaft Materials Model Diameter Stationary ring Rotational ring Elastomer AR-14 Ø 14 mm Ceramic Graphite NBR 6 BEARINGS 6203 ZZ / 6203 ZZ 7 CAPACITOR Pump Capacitance Single-phase (230 V or 240 V) (110 V) 2CPm 2/130N 20 μf 40 VL 60 μf 300 VL 8 ELECTRIC MOTOR 2CPm 2/130N: single-phase 230 V - 0 Hz with thermal overload protector built-in to the winding. 2CP 2/130N: three-phase 230/400 V - 0 Hz. Pump fitted with the three-phase motor option offers IE2 (IEC ) class high performance Insulation: F class. Protection: IP X

10 DIMENSIONS AND WEIGHT a DN2 f n DN1 h1 h2 h w n1 s MODEL PORTS DIMENSIONS mm kg Single-phase Three-phase DN1 DN2 a f h h1 h2 n n1 w s 1~ 3~ 2CPm 2/130N 2CP 2/130N 1¼ ABSORPTION MODEL VOLTAGE (single-phase) Single-phase 230 V 240 V 110 V 2CPm 2/130N 6.3 A 6.0 A 12.6 A MODEL VOLTAGE (three-phase) Three-phase 230 V 400 V 690 V 240 V 41 V 720 V 2CP 2/130N 4.6 A 2.6 A 1. A 4.3 A 2. A 1. A PALLETIZATION MODEL GROUPAGE CONTAINER n H kg n H kg Single-phase Three-phase pumps (mm) 1~ 3~ pumps (mm) 1~ 3~ 2CPm 2/130N 2CP 2/130N H

11 2CP POS. COMPONENT CONSTRUCTION CHARACTERISTICS 1 PUMP BODY Cast iron, complete with threaded ports in compliance with ISO 228/1 2 IMPELLERS Brass 3 MOTOR SHAFT Stainless steel EN MECHANICAL SEAL Pump Seal Shaft Materials BEARINGS Pump Model Model Model Diameter Stationary ring Rotational ring Elastomer 2CP 2/14 2CP 2/16 FN-18 Ø 18 mm Graphite Ceramic NBR 2CP 32/200 FN-20 Ø 20 mm Graphite Ceramic NBR 2CP 32/210 2CP 40/180 FN-24 Ø 24 mm Graphite Ceramic NBR 2CP 40/200 FN-32 NU Ø 32 mm Graphite Ceramic NBR 2CP 2/14 2CP 2/16 2CP 32/200 2CP 32/210 2CP 40/180 2CP 40/ ZZ / 6204 ZZ 6206 ZZ - C3 / 6206 ZZ - C ZZ - C3 / 6206 ZZ - C ZZ - C3 / 6308 ZZ - C3 6 CAPACITOR Pump Capacitance Single-phase (230 V or 240 V) (110 V) 2CPm 2/14B 2CPm 2/16C 2 μf 40 VL 60 μf 20 VL 2CPm 2/14A 2CPm 2/16B 4 μf 40 VL 80 μf 20 VL 7 ELECTRIC MOTOR 2CPm: single-phase 230 V - 0 Hz with thermal overload protector built-in to the winding. 2CP: three-phase 230/400 V - 0 Hz up to 4 kw. 400/690 V - 0 Hz from. to 11 kw Pumps fitted with the three-phase motor option offer IE2 (IEC ) class high performance Insulation: F class. Protection: IPX

12 DIMENSIONS AND WEIGHT f n a DN2 DN1 h1 h2 h w n1 s MODEL PORTS DIMENSIONS mm kg Single-phase Three-phase DN1 DN2 a f h h1 h2 n n1 w s 1~ 3~ 2CPm 2/14B 2CP 2/14B CPm 2/14A 2CP 2/14A CPm 2/16C 2CP 2/16C 1¼ CPm 2/16B 2CP 2/16B CP 2/16A 24. 2CP 32/200C-B 1½ /43.0 1¼ 2CP 32/210B-A /61.0 2CP 40/180C CP 40/180B-A 1½ /60.0 2CP 40/200B-A /90.0 ABSORPTION MODEL VOLTAGE (single-phase) Single-phase 230 V 240 V 110 V 2CPm 2/14B 7.7 A 7.4 A 1. A 2CPm 2/14A 10. A 10.0 A 21.0 A 2CPm 2/16C 7.7 A 7.4 A 1. A 2CPm 2/16B 10.0 A 9.6 A 20.0 A MODEL VOLTAGE (three-phase) Three-phase 230 V 400 V 690 V 240 V 41 V 720 V 2CP 2/14B.4 A 3.1 A 1.8 A.2 A 3.0 A 1.7 A 2CP 2/14A 6.9 A 4.0 A 2.3 A 6.6 A 3.8 A 2.2 A 2CP 2/16C.4 A 3.1 A 1.8 A.2 A 3.0 A 1.7 A 2CP 2/16B 6.9 A 4.0 A 2.3 A 6.6 A 3.8 A 2.2 A 2CP 2/16A 9.2 A.3 A 3.1 A 8.8 A.1 A 2.9 A 2CP 32/200C 12.8 A 7.4 A 4.3 A 12.3 A 7.1 A 4.1 A 2CP 32/200B 18.2 A 10. A 6.1 A 17.7 A 10.2 A.9 A 2CP 32/210B 21.7 A 12. A 7.2 A 19.9 A 11. A 6.7 A 2CP 32/210A 27.7 A 16.0 A 9.2 A 26.0 A 1.0 A 8.7 A 2CP 40/180C 17.0 A 9.8 A.7 A 16. A 9. A. A 2CP 40/180B 21.3 A 12.3 A 7.1 A 20.8 A 12.0 A 6.9 A 2CP 40/180A 26.7 A 1.4 A 8.9 A 26.0 A 1.0 A 8.7 A 2CP 40/200B 17. A 10.1 A 17. A 10.1 A 2CP 40/200A 20.0 A 11. A 20.0 A 11. A PALLETIZATION MODEL GROUPAGE CONTAINER n pumps H (mm) kg n pumps H (mm) kg Single-phase Three-phase 1~ 3~ 1~ 3~ 2CPm 2/14B 2CP 2/14B CPm 2/14A 2CP 2/14A CPm 2/16C 2CP 2/16C CPm 2/16B 2CP 2/16B CP 2/16A CP 32/200C CP 32/200B CP 32/210B CP 32/210A CP 40/180C CP 40/180B CP 40/180A CP 40/200B CP 40/200A H 8