PS/PSL Centrifugal pumps
|
|
- Neal Rodgers
- 6 years ago
- Views:
Transcription
1 1 14 EN Centrifugal pumps Technical Data Delivery rate Q max = 1250 l/min Delivery head H max = 110 m Delivery temperature T = 0 C to + C Kinematic viscosity ν max = 30 mm 2 /s Quality Management DIN EN ISO 9001:08 Environmental Management DIN EN ISO 101 Health and Safety Management OHSAS 101
2 2 Centrifugal pumps spandaupumpen.com PS 01 Immersion pumps, sealless 50 Hz, closed impellers p [psi] H [m] PS stages 50 Hz 1 90 PS stages Features Vertical multistage coolant pump For delivery of clean, polluted and viscous types of fluids Delivery head 1) PS stages PS stages PS stages PS stages Installation direcly into the reservoir Pressure port is located above the reservoir plate and designed with internal thread 0 10 PS stages Q [l/min] Q [USgpm] Delivery rate 1) Technical Data Mechanical design Variations Delivery rate Q max 1250 l/min Delivery head H max 105 m Flange Mechanical seal NBR Immersion depth t max 670 mm Shaft Extension tube Kinematic viscosity max. 30 mm 2 /s Delivery temperature 0 C to + C Grain size max. Ø4 mm Contamination max. 8,2 kg/m 3 Direction of rotation clockwise (as viewed looking down on the motor's ventilation side) Impeller Intermediate chamber Bearings Bushing Pumps bottom Deep groove ball bearing with covering disk Sintered iron Fluids delivered Emulsions, cooling and cutting oils, Water with rustproofing additives, heat carrier oil 1) Data for viscosity of ~1 mm²/s at a density of ~1 kg/dm³. Minimum volumetric flow: 5 to 10 % of nominal delivery rate.
3 spandaupumpen.com Centrifugal pumps 3 PS 01 Immersion pumps, sealless 50 Hz, closed impellers k Ø m Ø l Ø2 / 4x Ø14 max. level of fluid t min. level of fluid Ø1 Electrical data, dimensions and weights at 50 Hz Series Type of pump Frame size Stages Immersion depth t [mm] Voltage / Y U [V] Motor index Rated motor values Output P N [kw] Current / Y l N [A] Speed n N [min -1 ] Dimensions [mm] Øm k l Weight [kg] Sonic pressure [dba] Pressure port (DIN ISO 228) PS PSL H 1,1 4,07/2, K 2,2 7,15/4, / L 3,0 10,0/5, M 4,0 13,0/7, N 5,5 11, O 7,5 14,
4 4 Centrifugal pumps spandaupumpen.com PS 01 Immersion pumps, sealless Hz, closed impellers p [psi] H [m] PS stages Hz 1 90 PS stages Features Vertical multistage coolant pump For delivery of clean, polluted and viscous types of fluids Delivery head 1) PS stages PS stages PS stages PS stages Installation direcly into the reservoir Pressure port is located above the reservoir plate and designed with internal thread 0 10 PS stages Q [l/min] Q [USgpm] Delivery rate 1) Technical Data Mechanical design Variations Delivery rate Q max Delivery head H max Immersion depth t max 1250 l/min 105 m 670 mm Flange Shaft Mechanical seal NBR Extension tube Kinematic viscosity max. 30 mm 2 /s Delivery temperature 0 C to + C Grain size max. Ø4 mm Contamination max. 8,2 kg/m 3 Direction of rotation clockwise (as viewed looking down on the motor's ventilation side) Impeller Intermediate chamber Bearings Bushing Pumps bottom Deep groove ball bearing with covering disk Sintered iron Fluids delivered Emulsions, cooling and cutting oils, Water with rustproofing additives, heat carrier oil 1) Data for viscosity of ~1 mm²/s at a density of ~1 kg/dm³. Minimum volumetric flow: 5 to 10 % of nominal delivery rate.
5 spandaupumpen.com Centrifugal pumps 5 PS 01 Immersion pumps, sealless Hz, closed impellers k Ø m Ø l Ø2 / 4x Ø14 max. level of fluid t min. level of fluid Ø1 Electrical data, dimensions and weights at Hz Series Type of pump Frame size Stages Immersion depth t [mm] Voltage / Y U [V] Motor index Rated motor values Output P N [kw] Current / Y l N [A] Speed n N [min -1 ] Dimensions [mm] Øm k l Weight [kg] Sonic pressure [dba] Pressure port (DIN ISO 228) PS PSL H 1,26 4,07/2, K 2,6 7,5/4, / L 3,6 10,1/5, M 4,5 12,7/7, N 6,2 11, Δ O 8,6 14,
6 6 Centrifugal pumps spandaupumpen.com PS 03 Immersion pumps, sealless 50 Hz, closed impellers p [psi] H [m] PS ) 7-stages 50 Hz PS ) 6-stages PS stages Features Vertical multistage coolant pump For delivery of clean, polluted and viscous types of fluids Installation direcly into the reservoir Pressure port is located above the reservoir plate and designed with internal thread Delivery head 1) PS stages PS stages PS stages PS stages Q [l/min] Q [USgpm] Delivery rate 1) Technical Data Mechanical design Variations Delivery rate Q max Delivery head H max Immersion depth t max 1250 l/min 105 m 670 mm Flange Shaft Mechanical seal NBR Extension tube Kinematic viscosity max. 30 mm 2 /s Delivery temperature 0 C to + C Grain size max. Ø4 mm Contamination max. 8,2 kg/m 3 Direction of rotation clockwise (as viewed looking down on the motor's ventilation side) Impeller Intermediate chamber Bearings Bushing Pumps bottom Deep groove ball bearing with covering disk Sintered iron Fluids delivered Emulsions, cooling and cutting oils, Water with rustproofing additives, heat carrier oil 1) Data for viscosity of ~1 mm²/s at a density of ~1 kg/dm³. Minimum volumetric flow: 5 to 10 % of nominal delivery rate. 2) Frame sizes 0306 and 0307 available on request.
7 spandaupumpen.com Centrifugal pumps 7 PS 03 Immersion pumps, sealless 50 Hz, closed impellers k Ø m Ø l Ø2 / 4x Ø14 max. level of fluid t min. level of fluid Ø1 Electrical data, dimensions and weights at 50 Hz Series Type of pump Frame size Stages Immersion depth t [mm] Voltage / Y U [V] Motor index Rated motor values Output P N [kw] Current / Y l N [A] Speed n N [min -1 ] Dimensions [mm] Øm k l Weight [kg] Sonic pressure [dba] Pressure port (DIN ISO 228) PS PSL K 2,2 7,15/4, / M 4,0 13,0/7, N 5,5 11, O 7,5 14, Y 9,5 17, * 06* P * 0 Q * Frame sizes 0306 and 0307 available on request.
8 8 Centrifugal pumps spandaupumpen.com PS 03 Immersion pumps, sealless Hz, closed impellers p [psi] H [m] PS ) 7-stages Hz PS ) 6-stages PS stages Features Vertical multistage coolant pump For delivery of clean, polluted and viscous types of fluids Installation direcly into the reservoir Pressure port is located above the reservoir plate and designed with internal thread Delivery head 1) PS stages PS stages PS stages PS stages Q [l/min] Q [USgpm] Delivery rate 1) Technical Data Mechanical design Variations Delivery rate Q max Delivery head H max Immersion depth t max 1250 l/min 105 m 670 mm Flange Shaft Mechanical seal NBR Extension tube Kinematic viscosity max. 30 mm 2 /s Delivery temperature 0 C to + C Grain size max. Ø4 mm Contamination max. 8,2 kg/m 3 Direction of rotation clockwise (as viewed looking down on the motor's ventilation side) Impeller Intermediate chamber Bearings Bushing Pumps bottom Deep groove ball bearing with covering disk Sintered iron Fluids delivered Emulsions, cooling and cutting oils, Water with rustproofing additives, heat carrier oil 1) Data for viscosity of ~1 mm²/s at a density of ~1 kg/dm³. Minimum volumetric flow: 5 to 10 % of nominal delivery rate. 2) Frame sizes 0306 and 0307 available on request.
9 spandaupumpen.com Centrifugal pumps 9 PS 03 Immersion pumps, sealless Hz, closed impellers k Ø m Ø l Ø2 / 4x Ø14 max. level of fluid t min. level of fluid Ø1 Electrical data, dimensions and weights at Hz Series Type of pump Frame size Stages Immersion depth t [mm] Voltage / Y U [V] Motor index Rated motor values Output P N [kw] Current / Y l N [A] Speed n N [min -1 ] Dimensions [mm] Øm k l Weight [kg] Sonic pressure [dba] Pressure port (DIN ISO 228) PS PSL K 2,6 7,5/4, / M 4,5 12,7/7, N 6,2 11, O 8,6 14, Δ Y 11,0 17, * 06* P 12, * 0 Q * Frame sizes 0306 and 0307 available on request.
10 10 Centrifugal pumps spandaupumpen.com Immersion pumps, sealless Order key Series PS- = Standard design PSL = "Slurp" for air-polluted liquids Frame size To determine the frame size the corresponding characteristics has to be used. 01, 03 Stages To determine the desired number of stages the corresponding characteristics has to be used. 01 = 1-stages = 7-stages s G = gray cast iron (standard) Seal B = gap bush (standard) Pump design S = standard design V = bottom for extension tube Immersion depth in mm 250 = 250 mm = 670 mm Motor index To determine the desired motor index the appropriate table "Electrical data, dimensions and weights" has to be used. Example: J = 1,5 kw Power supply 01 = 230 /0 V at 50 Hz (to 4 kw) 265 /4 V at Hz (to 4,6 kw) 02 = 0 V at 50 Hz (from 5,5 kw) 4 V at Hz (from 6,3 kw) 05 = Standard for Europe 230/0 V at 50 Hz (from 4 kw) 0 V at 50 Hz (from 4 kw)... further designs on request Motor design BA = standard (insulation class F, IP 54, 2-pole, IE2)... further designs on request Order example: PS-0104GBS4M01BA Series: PS, Frame size: 01, 04-stages, : G grey cast iron, Seal: B gap bush, Pump design: S standard design, Immersion depth: 4 mm, Motor index: M 4,0 kw, Power supply: /0 V 50 Hz, 265/4 V Hz, Motor design: BA standard (IE2)
11 Notes
12 The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless our written permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication, but no liability can be accepted for any loss or damage whether direct, indirect or consequential, arising out of use of the information contained herein. SKF Lubrication Systems Germany GmbH Product department Spandau Pumps Motzener Strasse 35/ Berlin Germany PF Berlin Germany Tel. +49 (0) Fax +49 (0) SpandauPumpen@skf.com This brochure was presented by: 1-14-EN 11/15 Subject to change without notice.
PRA Centrifugal pumps
1 6001-EN PRA Centrifugal pumps Technical data Delivery rate Q max = 130 l/min Delivery head H max = 30 m Temperature range T = 5 C to 60 C Kinematic viscosity ν max = mm 2 /s Quality Management DIN EN
More informationPSR Centrifugal pumps
1 65 EN Centrifugal pumps Technical data Delivery rate Q max = 180 l/min Delivery head H max = 255 m Temperature range T = -10 C to +80 C Kinematic viscosity ν max = mm 2 /s Quality Management DIN EN ISO
More informationPS/PSL Centrifugal pumps
1 14 EN Centrifugal pumps Technical Data Delivery rate Q max = 1250 l/min Delivery head H max = 110 m Delivery temperature T = 0 C to + C Kinematic viscosity ν max = 30 mm 2 /s Quality Management DIN EN
More informationPMS Centrifugal pumps
1 6033 EN Centrifugal pumps Technical data Delivery rate Q max = 400 l/min Delivery head H max = 45 m Delivery temperature T = 0 C bis +0 C Kinematic viscosity ν max = 20 mm 2 /s Quality Management DIN
More informationCentrifugal pumps. Main catalogue.
Main catalogue 1 6667 EN Centrifugal pumps for machine tools and filter systems, printing and packaging machines, temperature control units Quality Management DIN EN ISO 9001:08 www.spandaupumpen.com Environmental
More informationPAB Atex-certified centrifugal pumps
1 6036 EN PAB Atex-certified centrifugal pumps Technical data Delivery rate Q max = 305 l/min Delivery head H max = 20 m Temperature range 0 C to +60 C Quality Management DIN EN ISO 9001: 2008 Environmental
More informationImmersion Pumps PMS and PMS-T sealless
Immersion Pumps PMS and PMS-T sealless 1-6033-EN Centrifugal pumps of metal with high resistance to wear for diverse industrial fluids Technical data Delivery rate Q max = 400 l/min Delivery head H max
More informationImmersion Pumps PS and PSL ( Slurp Pump ) sealless
Immersion Pumps PS and PSL ( Slurp Pump ) sealless 1-6014-US Centrifugal pumps of metal for clean, polluted and viscous fluids Technical data Delivery rate Q max = 1250 l/min Delivery head H max = 105
More informationElectric Immersion Pumps PXA and PXK, sealless
1-6062-US PXA and PXK, sealless MQUALITY MANAE ENT Cooling and lubricating with high-pressure... Centrifugal pumps for delivery pressures up to 25 bars Technical data Delivery rate Q max = 185 l/min Delivery
More informationLMP screw pumps for delivery pressures up to 120 bar
1 64 EN LM screw pumps for delivery pressures up to 12 bar Technical data Delivery rate max. = 67 l/min Delivery pressure p max. = 12 bar Temperature range C to +8 C Kinematic viscosity 1 to 2 mm 2 /s
More informationCompact Units. For fluid grease, NLGI grades 000, 00 Group MKF 0.1 or 0.2 l/min EN
1-16-EN Compact Units For fluid grease, NLGI grades, Group MKF.1 or.2 l/min MKF1-KW2-2 MKF2-KW3-2 MKF2-KW6-22 These MKFcompact units were developed to supply intermittently operated single-line centralized
More informationElectric Immersion Pumps PRT and PRA, sealless
PRT and, sealless MQUALITY MANAGE ENT Centrifugal pumps of plastic for a wide variety of industrial fluids Technical data Delivery rate Q max = 20 l/min Delivery head H max = 32 m Temperature range -30
More informationElectric Immersion Pumps PT sealless EN
Electric Immersion Pumps PT sealless 1 6017 EN 1 6017 US Peripheral impeller pumps of high tech plastic for clean fluids Technical data Delivery rate Q max = 23 l/min Delivery head H max = 35 m Temperature
More informationPPU, PHU Piston Pumps for progressive grease and oil systems, pneumatically or hydraulically actuated
1-0107-5-EN PPU, PHU Piston Pumps for progressive grease and oil systems, pneumatically or hydraulically actuated These piston pumps are available with two different delivery rate ranges. The pumps can
More informationSystem description for cylinder lubrication and valve seat lubrication on large 4-stroke diesel engines
for cylinder lubrication and valve seat lubrication on large 4-stroke diesel engines Valve seat lubrication Cylinder lubrication Version 04 Page 2 for cylinder lubrication and valve seat lubrication on
More informationElectric Plug-and-Socket Connectors
-70-EN Electric Plug-and-Socket Connectors Sockets for pressure switches, level switches, flow sensors, directional control valves and filters DIN EN 750-80/ISO 4400 DIN EN 750-804 M Electric plugs or
More informationFlow Monitors and Sensors
1-1704-EN Flow Monitors and Sensors for intermittent and circulating centralized lubrication systems Flow monitor Flow sensor Oil-streak sensor Flow monitors/sensors have the task of monitoring the flow
More informationDirectional Valves for oil or grease
1-173-EN Directional Valves for oil or grease 161-1-31 161-1-5 DV5-4 Function he directional valves listed on the following pages are used to control the flow of lubricants, e.g. to divide up a central
More informationGrease Pump Units For progressive and multiline systems, manually, pneumatically or hydraulically actuated
1-0107-4-EN Grease Pump Units For progressive and multiline systems, manually, pneumatically or hydraulically actuated PF-23-2 PFP-23-2 PFH-23-2 Single- and dual-circuit piston pumps are designed for the
More informationInjection oilers, micro pumps for minimal quantity metering
1-5012-4-EN Injection oilers, micro pumps for minimal quantity metering Injection oiler, 3-port type Injection oiler, 1-port type Micro pump Delivery rates Metering pumps deliver lubricants in a measured
More informationUD and UC Gear pump unit
1-19-EN for SKF CircOil or hydraulic lubrication systems General Information The UC and UD gear pump units are vertically or horizontally arranged units that are used in hydraulic or circulating-oil lubrication
More informationGrease Pump Units. For progressive and multiline systems, manually, pneumatically or hydraulically actuated. Please note!
1-0107-4-EN Grease Pump Units For progressive and multiline systems, manually, pneumatically or hydraulically actuated PF-23-2 PFP-23-2 PFH-23-2 Single- and dual-circuit piston pumps are designed for the
More informationCRK 2-60/6 AWA-BUBV 075KW 3X400V 50HZ
GRUNDFOS DATA BOOKLET CRK 2-6/6 AWA-BUBV 75KW 3X4V 5HZ Grundfos Pump 49716 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crk2/49716/crk-2-6-6-a-w-a-auuv.html
More informationSingle-Line Centralized Lubrication Systems
1-15-EN Single-Line Centralized Lubrication Systems For fluid grease, NLGI grades, PFE-15-1. PF-289 MFE2-KW6F-S1 U1 U2 U3 The layout of a single-line centralized lubrication system for grease is largely
More informationAccessories for Minimal Quantity Metering
1-5012-5-EN Accessories for Minimal Quantity Metering for chain lubrication and surface wetting Brush Spray head Flow volume divider Nozzles Pinpoint application of metered quantities of oil Brushes Storage
More informationSF6. EBARA PUMPS EUROPE S.p.A. SUBMERSIBLE PUMPS. Page - CONTENTS 100
SPECIFICATIONS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CHART R10 204 PERFORMANCE CHART R13 205 PERFORMANCE CHART S25 206 PERFORMANCE
More informationCompany name: Created by: Phone: Note! Product picture may differ from actual product
Date: 13/03/2017 Tender Text Note! Product picture may differ from actual product Product No.: 98993055 MTH4-5/5 A-W-A-AQQV Multistage, immersible, self-priming, centrifugal pump for vertical installation
More informationSF6. EBARA PUMPS EUROPE S.p.A. SUBMERSIBLE PUMPS. Page - CONTENTS 100
SPECIFICATIONS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CHART R10 204 PERFORMANCE CHART R13 205 PERFORMANCE CHART S25 206 PERFORMANCE
More information- continuos running: max ±5%. - intermittent running: max ±10%. Voltage imbalance between phases: max 2%. Maximum number of starts per hour: 30.
Submersible Electric Pumps GLS Series MARKET SECTORS RESIDENTIAL AND COMMERCIAL BUILDINGS, INDUSTRIES. APPLICATIONS Submersible pump for pumping clean water, surface water and wastewater containing solids
More informationImmersion Pumps PRG sealless
Immersion Pumps PRG sealless 1-6007-US Centrifugal pumps of plastic for clear or turbid fluids Technical data Delivery rate Q max = 60 l/min Delivery head H max = 32 m Temperature range 20 C to +60 C Product
More informationStandard filter Disk filter Return filter. Lubrication systems can fail from the following
Filters For oil For use in SKF centralized lubrication systems Standard filter Disk filter Return filter Why filtering? Solids are diagnosed to be the main cause of damages on the components that are used
More informationPage - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE DIMENSIONS AND WEIGHT 400 PUMP DRAWING 400 DIMENSION PUMP TABLE 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE R10 205 PERFORMANCE CURVE R13 206 PERFORMANCE CURVE S25 207 PERFORMANCE CURVE S32 208 PERFORMANCE
More informationInexpensive solution for the lubrication of linear guides and rolling bearings
1-0988-EN Compact Greaser Inexpensive solution for the lubrication of linear guides and rolling bearings Compact Greaser Up to 5 lubricant outlet ports 3 different metered volumes (15 mm 3 standard) Suitable
More informationStandard filter Disk filter Return filter. Lubrication systems can fail from the following
Filters For oil For use in SKF centralized lubrication systems Standard filter Disk filter Return filter Why filtering? Solids are diagnosed to be the main cause of damages on the components that are used
More informationManually or pneumatically actuated piston pumps
Manually or pneumatically actuated piston pumps Product series Pxx For oil and fluid grease For use in SKF MonoFlex single-line centralized lubrication systems Manually or pneumatically actuated piston
More informationFlow limiter SP/SMB3 Flow limiter SP/SMB6
-00-EN Flow limiter SP/SMB Flow limiter SP/SMB6 for circulating-oil lubrication systems Advantages reliable perpetual dispensation of individual volume flows - self-adjusting metering, thus identical volume
More informationHigh-pressure pumps Series HP45
High-pressure pumps Series HP45 www.andritz.com/pumps General Description / Application Multi-stage high pressure pumps for water supply, irrigation and industrial applications, for hot and cold water
More informationSP/SMT 1 Flow Divider
1-5017-EN S/SMT 1 Flow Divider with and without inline strainer for circulating-oil or hydraulic systems Introduction The flow divider splits the supplied flow into two equal induvidual flows or into two
More informationFlow limiter SP/SMB13 for line installation in circulating-oil lubrication systems.
1-3004-EN Flow limiter SP/SMB13 for line installation in circulating-oil lubrication systems. Flow limiters are used in circulating-oil lubrication systems. The task of a flow limiter is to divide up the
More informationCRK 2-180/18 A-W-A-AUUV 3x380 /415Y V
GRUNDFOS DATA BOOKLET CRK 2-18/18 A-W-A-AUUV 3x38 /415Y V Grundfos pump 497218 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crk2/497218/crk-2-18-18-a-w-a-auuv.html
More informationCRT 2-4 A-P-A-E-AUUE 055kW 400Y 50Hz
GRUNDFOS DATA BOOKLET CRT 2-4 A-P-A-E-AUUE 55kW 4Y Hz Grundfos Pump 9633 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crt2/9633/crt-2-4-a-p-a-e-auue.html
More informationMMD 4 Poles. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE MMD4 32-250 205 PERFORMANCE CURVE MMD4 40-250 206 PERFORMANCE CURVE MMD4 50-250 207 PERFORMANCE
More informationCRT 16-4 A-P-A-E-AUUE 4kW 3x400D 50Hz
GRUNDFOS DATA BOOKLET CRT 16-4 A-P-A-E-AUUE 4kW 3x4D 5Hz Grundfos Pump 96117246 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crt16/96117246/crt-16-4-a-p-a-e-auue.html
More information" " (495) For oil For continuous monitored lubrication with minimum quantities from 0,5 to 5 mm³/min
System integration only in close cooperation with SKF Portfolio management Microdosage system MDS Product series MDx For oil For continuous monitored lubrication with minimum quantities from 0,5 to 5 mm³/min
More informationManually or pneumatically actuated Piston pumps
Manually or pneumatically actuated Piston pumps For oil and fluid grease For use in SKF MonoFlex single-line centralized lubrication systems These manually or pneumatically actuated piston pumps were designed
More informationAir-oil centralized lubrication systems
Air-oil centralized lubrication systems A lubrication system should always be as modern and efficient as the machine it is lubricating. Lincoln air-oil systems are ideally suited for this because they
More informationCRT 8-20 A-P-A-E-AUUE 11kW 3x400D 50Hz
GRUNDFOS DATA BOOKLET CRT 8-2 A-P-A-E-AUUE 11kW 3x4D 5Hz Grundfos Pump 96117234 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crt8/96117234/crt-8-2-a-p-a-e-auue.html
More informationCRK 2-180/18 A-W-A-AUUV 3x230/400V 60HZ
GRUNDFOS DATA BOOKLET CRK 2-18/18 A-W-A-AUUV 3x23/4V 6HZ Grundfos pump 497178 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crk2/497178/crk-2-18-18-a-w-a-auuv.html
More informationGrey Water and Condensate Pump. Rotex. Type Series Booklet
Rotex Type Series Booklet Legal information/copyright Type Series Booklet Rotex Original operating manual All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,
More informationBlock feeder SPVS Used in oil or grease lubrication systems
1-3029-EN Block feeder SPVS Used in oil or grease lubrication systems Block feeders of the SPVS series are used in grease and oil total loss lubrication systems. They are used to either increase the number
More informationInjection oilers, micro pumps
1-5012-4-EN Injection oilers, micro pumps for minimal quantity metering Injection oiler, 3-port type Injection oiler, 1-port type Micro pump Delivery rates Metering pumps deliver lubricants in a measured
More informationBlock feeder SPVS Used in oil or grease lubrication systems
1-3029-EN Block feeder SPVS Used in oil or grease lubrication systems Block feeders of the SPVS series are used in grease and oil total loss lubrication systems. They are used to either increase the number
More informationAxial Piston Fixed Pump A17FNO Series 10
Axial Piston Fixed Pump A17FNO Series 10 RE 91510 Issue: 06.2012 Replaces: 03.2010 Size 125 Nominal pressure 250 bar Maximum pressure 300 bar For commercial vehicles Open circuit Features Fixed pump with
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 ITEM QUANTITY FOR MODEL 302 INTERMEDIATE CASING WITH BEARING POSITION 303
SPECIFICATIONS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY 203 PERFORMANCE CHART 2 204 PERFORMANCE CHART 4 205 PERFORMANCE CHART 7 206 PERFORMANCE CHART 15 207 - CONSTRUCTIONS
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 ITEM QUANTITY FOR MODEL 302 INTERMEDIATE CASING WITH BEARING POSITION 303
SPECIFICATIONS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY 203 PERFORMANCE CHART 2 204 PERFORMANCE CHART 4 205 PERFORMANCE CHART 7 206 PERFORMANCE CHART 15 207 - CONSTRUCTIONS
More information4WN. EBARA PUMPS EUROPE S.p.A. SUBMERSIBLE MULTISTAGE PUMPS. Pag
CONTENTS Pag - SPECIFICATIONS 200 PUMP SPECIFICATION 200 MOTOR SPECIFICATION 201 SECELTION CHART 202-203 TYPE KEY AND CURVES SPECIFICATIONS 204-205 PERFORMANCE CURVE 1 206 PERFORMANCE CURVE 2 207 PERFORMANCE
More informationLMP screw pumps for delivery pressures up to 120 bar
1 64 EN LM screw pumps for delivery pressures up to 12 bar Technical data Delivery rate max. = 67 l/min Delivery pressure pmax. = 12 bar Temperature range C to + 8 C Kinematic viscosity 1 to 25 mm2/s uality
More informationCRN1S-21 A-FGJ-G-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN1S-21 A-FGJ-G-E-HQQE 3x23/4 5HZ Grundfos Pump 96515918 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crn1s/96515918/crn-1s-21-a-fgj-g-e-hqqe.html
More informationMMD. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 65-250 204 PERFORMANCE CURVE 80-160 205 PERFORMANCE CURVE 80-200 206 PERFORMANCE CURVE 80-250
More informationFeed Pumps VP / VPB / VPBM
Feed Pumps VP / VPB / VPBM Symbol General The feed pumps from the VP series are low-noise, single-stroke vane pumps with constant flow rate. Using a damped bell housing (PT) enables noise levels to be
More informationJM Oil Lubrication Pump SKF MultiFlex multi-line pump units for total loss oil lubrication systems on compressors
1-3007-EN SKF MultiFlex multi-line pump units for total loss oil lubrication systems on compressors General Information The JM oil lubrication pump is a highpressure multiline pump that produces a maximum
More information- CONSTRUCTIONS 300 SECTIONAL VIEW (4N1 4N2 4N4) 300 SECTIONAL VIEW (4N7 4N10 4N15) 301 SECTIONAL VIEW TABLE 302 ITEM QUANTITY FOR MODEL 303
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART 202 TYPE KEY 203 PERFORMANCE CHART 4N1 204 PERFORMANCE CHART 4N2 205 PERFORMANCE CHART 4N4 206 PERFORMANCE CHART 4N7
More informationIPC Medium-Pressure Internal Gear Pumps Technical Data Sheet
IPC Medium-Pressure Internal Gear Pumps Technical Data Sheet Function 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing segment 5 Axial disc Axial
More informationSKF VectoLub, accessories Accessories for the minimal quantity lubrication systems VTEC and VE1B EN
SKF VectoLub, accessories Accessories for the minimal quantity lubrication systems VTEC and VE1B 1-4402-EN Spray blocks Every spraying unit is connected to the coaxial outlet of a VTEC or VE1B unit. It
More informationIPVS High-pressure Internal Gear Pumps Technical Data Sheet
IPVS High-pressure Internal Gear Pumps Technical Data Sheet Functional Drawing 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing segment 5 Axial
More informationFor high-viscosity oils and fluid grease of NLGI grades 000, 00 For use in SKF MonoFlex single-line centralized lubrication systems
Gear pump unit roduct series KFB For high-viscosity oils and fluid grease of NLGI grades 000, 00 For use in SKF MonoFlex single-line centralized lubrication systems SKF gear pump units of the KFB product
More informationLPCD. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 40 204 PERFORMANCE CURVE 50 205 PERFORMANCE CURVE 65 207 PERFORMANCE CURVE 80 208 PERFORMANCE
More informationData sheet. Etaline GN /1852 G10 Version no.: 1 Inline pump. Operating data. Design. Requested developed head m
Data sheet Item no.: 2600 Page: 1 / 5 Operating data Requested flow rate 40.00 m ³/h Actual flow rate 40.00 m ³/h Requested developed head 68.00 m Actual developed head 68.00 m Pumped medium Water Efficiency
More informationPage - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 65-250 204 PERFORMANCE CURVE 80-160 205 PERFORMANCE CURVE 80-200 206 PERFORMANCE CURVE 80-250
More informationCR10-07 A-FJ-A-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CR1-7 A-FJ-A-E-HQQE 3x4D 5 HZ Grundfos Pump 9651216 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crfam/9651216/cr-1-7-a-fj-a-e-hqqe.html
More informationChain lubrication, accessories
1-106-EN Chain lubrication, accessories Nozzles, oiling brushes, reservoirs and other accessories for chain lubrication Oil projection nozzle AC-A Compact design, pinpoint accuracy, and high temperature
More informationCRT 4-5 A-P-A-E-AUUE 3x230D/400Y V
GRUNDFOS DATA BOOKLET CRT 4-5 A-P-A-E-AUUE 3x23D/4Y V Grundfos pump 961798 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crt4/961798/crt-4-5-a-p-a-e-auue.html
More informationChain lubrication, accessories Nozzles, oiling-brushes, reservoirs and other accessories for the chain lubrication EN
Nozzles, oiling-brushes, reservoirs and other accessories for the chain lubrication 1-106-EN 16 10,5 16 10,5 ~ ~ Chain lubrication, accessories Oil projection nozzle AC-A Compact design, pinpoint accuracy,
More informationGrease Lubrication Pump FK
1-3033-EN 1-0358-US for use in progressive, single-line and dual-line centralized lubrication systems pplication he FK pump unit is a multi-function piston pump whose modular structure makes it very versatile.
More informationCentrifugal pumps type T. Version
type T Version 4-215 Content Layout and areas of application for the KNOLL centrifugal pump... 3 Pump overview... 4 Type key and standard multirange motors... 5 Clean coolant pump TG 2...6 Clean coolant
More informationS4G Series. Technical Guide. 4 submersible pumps
SG Series Technical Guide submersible pumps SG Series t Index Sectors of application... Technical characteristics SG... 5 Table of materials and identification data... 6 Nominal data... Hydraulic performance
More informationCRN5-8 A-P-G-V-HQQV 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN5-8 A-P-G-V-HQQV 3x23/4 5HZ Grundfos Pump 96517266 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crn5/96517266/crn-5-8-a-p-g-v-hqqv.html
More informationFlow limiter SP/SMB10 Dual flow series
1-00-EN Dual flow series Advantages reliable - Parallel distribution of individual flow quantities - self-regulating metering with pressure balancing valve, thus constant volumetric flows even for different
More informationCRN15-09 A-P-G-V-HQQV 3x400/ HZ
GRUNDFOS DATA BOOKLET CRN15-9 A-P-G-V-HQQV 3x/69 5 HZ Grundfos Pump 9652 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crn15/9652/crn-15-9-a-p-g-v-hqqv.html
More informationFor grease For application in SKF DuoFlex dual-line centralized lubrication systems
Change-over valves, differential pressure switch ccessories for Dual-line Systems For grease For application in SKF DuoFlex dual-line centralized lubrication systems Change-over valves Hydraulical or electrical
More informationWaste Water, Condensate and Heat Transfer Fluid Pump. Type Series Booklet
Waste Water, Condensate and Heat Transfer Fluid Pump Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied,
More informationIPVP High-pressure Internal Gear Pumps for Variable Speed Drives
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Design and Function 7 6 5 9 2 5 6 7 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing
More informationTLT. Standards. Telescopic pillar. Very small built-in dimension EN/IEC UL Powerful
TLT Telescopic pillar Very small built-in dimension Powerful Standards EN/IEC 661 1 UL 661 1 Technical data Unit TLT1 A1 TLT1 A2 TLT1 B1 TLT1 C1 TLT1 C2 Rated push load N 3 4 2 1 2 Rated pull load N Bending
More informationCRI1S-25 A-P-I-E-HQQE 1x220/240 50HZ
GRUNDFOS DATA BOOKLET CRI1S-25 A-P-I-E-HQQE 1x22/24 HZ Grundfos Pump 9654847 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cri1s/9654847/cri-1s-25-a-p-i-e-hqqe.html
More informationIPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet Design and Function 7 6 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b
More informationProduct series DigitalSuper
Minimal quantity lubrication (MQL) SKF LubriLean Product series DigitalSuper Extended product range with enhanced performance and state-of-the-art communication Products and applications The innovative
More informationTransfer Gear Pumps KF
Transfer Gear Pumps KF 4...112 2 KRACHT GmbH Gewerbestr. 20 58791 Werdohl, Germany Contents Technical Data Page Applications / Suitable fluids...........................................................
More informationCRN15-12 A-P-G-E-HQQE 3x400/ HZ
GRUNDFOS DATA BOOKLET CRN15-12 A-P-G-E-HQQE 3x/69 5 HZ Grundfos Pump 9651956 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crn15/9651956/crn-15-12-a-p-g-e-hqqe.html
More informationLinear actuator CAHM-31. Benefits. Modular Robust Reliable High speed and/or high load All metal design. Picture CAHM-3130-LS0300-D1-010
www.lmotion.ru lmotion-mail@ya.ru Тел.: (495)-921-34- Linear actuator CAH- Benefits odular Robust Reliable High speed and/or high load All metal design Picture CAH-3-LS3-D1-1 www.lmotion.ru lmotion-mail@ya.ru
More informationData sheet: Wilo-Multivert MVI 805 (3~400 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI 8 (~ V, EPDM, PN ) Pump curves 89 8 Wilo-Multivert-MVI 8-89 Hz Power Fluid temperature T -...+ C NPSH [m] H[m] 8 8 8 8 88 8 8 8 8 8 8 8 8 η p NPSH 8 8 [l/s] 89 η p [%] Max.
More informationCRI10-14 A-FGJ-I-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CRI1-1 A-FGJ-I-E-HQQE 3xD 5 HZ Grundfos Pump 96512 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cri1/96512/cri-1-1-a-fgj-i-e-hqqe.html
More informationTender Text. Company name: Created by: Phone: Date: 3/13/2017. Product No.: CRE 5-20 AN-FGJ-A-E-HQQE
Tender Text Product No.: 9685315 CRE 5-2 AN-FGJ-A-E-HQQE Product photo could vary from the actual product Liquid: Pumped liquid: Water Liquid temperature range: -2.. 12 C Liquid temperature during operation:
More informationEBARA LPCD 4-POLIGA CENTRIFUGALA PUMPAR
EBARA LPCD 4-POLIGA CENTRIFUGALA PUMPAR CONTENTS - SPECIFICATIONS SELECTION CHART TYPE KEY AND CURVE SPECIFICATIONS PERFORMANCE CURVE LPCD4 40 PERFORMANCE CURVE LPCD4 50 PERFORMANCE CURVE LPCD4 65 PERFORMANCE
More informationWaste Water, Condensate and Heat Transfer Liquid Pump. Type Series Booklet
Waste Water, Condensate and Heat Transfer Liquid Pump MK Type Series Booklet Legal information/copyright Type Series Booklet MK All rights reserved. The contents provided herein must neither be distributed,
More informationData sheet. Page: 1 / 5. ETL GGSAV11D BKSBIE3 Inline pump. Operating data. Design
Data sheet Page: 1 / 5 Operating data Requested flow rate Operating data determined for maximum inlet pressure Requested developed head 15.00 m Pumped medium Ambient air temperature 20.0 C Fluid temperature
More informationSIL Inline Single Stage Centrifugal Pumps
SIL Inline Single Stage Centrifugal Pumps SIL Inline Pump Range True Reliability Sulzer s new inline pump range (SIL) has been designed to fulfill efficiency regulations across all industries and also
More informationTransfer Gear Pumps KF
Transfer Gear Pumps KF 4...80 2 KRACHT GmbH Gewerbestr. 20 58791 Werdohl, Germany fon +49(0)23 92/935-0 fax +49(0)23 92/935 209 web www.kracht.eu mail info@kracht.eu Contents Technical Data Page Applications
More informationLowara. Centrifugal Electric Pumps Manufactured in AISI 316 Stainless Steel in Compliance with EN 733. SH Series. 60 Hz
Centrifugal Electric Pumps Manufactured in AISI 316 Stainless Steel in Compliance with EN 733 SH Series 60 Hz SERIE SH HYDRAULIC PERFORMANCE RANGE AT 60 Hz WEB 10-2006 2 CONTENTS 5 Specifications... 6
More informationCompany name: Created by: Phone:
Qty. Description 1 CRE 1-5 A-FJ-A-E-HQQE Date: /3/17 Product No.: On request Note! Product picture may differ from actual product The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor
More informationChange-Over Pressure Filter DFDK
Change-Over Pressure Filter up to 2500 l/min, up to 315 bar 30 60 110 140 160 240 280 330 500 660 1.x 660 2.x 990 2.x 1320 2.x 1320 3.x 2640 3.x 3960 3.x 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING
More information