PS/PSL Centrifugal pumps

Transcription

1 1 14 EN Centrifugal pumps Technical Data Delivery rate Q max = 1250 l/min Delivery head H max = 110 m Delivery temperature T = 0 C to + C Kinematic viscosity ν max = 30 mm 2 /s Quality Management DIN EN ISO 9001:08 Environmental Management DIN EN ISO 101 Health and Safety Management OHSAS 101

2 Im Folgenden finden Sie Informationen zu einem Teil unseres Leistungs- und Serviceportfolios. Sollten Sie hierzu oder zu anderen Produkten Fragen haben, treten Sie jederzeit gern in Kontakt mit uns: Tel: (kostenfrei) gruppe.de Parker Store Komponenten 3D- Rohrbiege- Service Wartung und Service Hydraulik & Pneumatik Aggregate- und Anlagenbau Mobiler Tag- und Nacht vor- Ort- Service Druckluft- Service Schmiertechnik Hauptsitz Senftenberg Laugkfeld 21, Senftenberg Tel: Bereitschaft: E- Mail: gruppe.de Niederlassung Dresden Niedersedlitzer Str Dresden Tel: Bereitschaft: E- Mail: gruppe.de Niederlassung Frankfurt/Oder Wildbahn 8, Frankfurt/Oder Tel: Bereitschaft: E- Mail: gruppe.de Niederlassung Genshagen & Rohrbiegezentrum Seestr., Genshagen Tel: Bereitschaft: E- Mail: gruppe.de Vertriebsgebiet Leipzig Tel.: E- Mail: leipzig@vogel- gruppe.de Niederlassung Schöneiche August- Borsig- Ring 15, Schöneiche Tel: Bereitschaft: E- Mail: schoeneiche@vogel- gruppe.de Industrie- Hydraulik Vogel & Partner GmbH. Laugkfeld Senftenberg, Tel.: info@vogel- gruppe.de. gruppe.de

3 2 Centrifugal pumps spandaupumpen.com PS 01 Immersion pumps, sealless 50 Hz, closed impellers p [psi] H [m] PS stages 50 Hz 1 90 PS stages Features Vertical multistage coolant pump For delivery of clean, polluted and viscous types of fluids Delivery head 1) PS stages PS stages PS stages PS stages Installation direcly into the reservoir Pressure port is located above the reservoir plate and designed with internal thread 0 10 PS stages Q [l/min] Q [USgpm] Delivery rate 1) Technical Data Mechanical design Variations Delivery rate Q max 1250 l/min Delivery head H max 105 m Flange Mechanical seal NBR Immersion depth t max 670 mm Shaft Extension tube Kinematic viscosity max. 30 mm 2 /s Delivery temperature 0 C to + C Grain size max. Ø4 mm Contamination max. 8,2 kg/m 3 Direction of rotation clockwise (as viewed looking down on the motor's ventilation side) Impeller Intermediate chamber Bearings Bushing Pumps bottom Deep groove ball bearing with covering disk Sintered iron Fluids delivered Emulsions, cooling and cutting oils, Water with rustproofing additives, heat carrier oil 1) Data for viscosity of ~1 mm²/s at a density of ~1 kg/dm³. Minimum volumetric flow: 5 to 10 % of nominal delivery rate.

4 spandaupumpen.com Centrifugal pumps 3 PS 01 Immersion pumps, sealless 50 Hz, closed impellers k Ø m Ø l Ø2 / 4x Ø14 max. level of fluid t min. level of fluid Ø1 Electrical data, dimensions and weights at 50 Hz Series Type of pump Frame size Stages Immersion depth t [mm] Voltage / Y U [V] Motor index Rated motor values Output P N [kw] Current / Y l N [A] Speed n N [min -1 ] Dimensions [mm] Øm k l Weight [kg] Sonic pressure [dba] Pressure port (DIN ISO 228) PS PSL H 1,1 4,07/2, K 2,2 7,15/4, / L 3,0 10,0/5, M 4,0 13,0/7, N 5,5 11, O 7,5 14,

5 4 Centrifugal pumps spandaupumpen.com PS 01 Immersion pumps, sealless Hz, closed impellers p [psi] H [m] PS stages Hz 1 90 PS stages Features Vertical multistage coolant pump For delivery of clean, polluted and viscous types of fluids Delivery head 1) PS stages PS stages PS stages PS stages Installation direcly into the reservoir Pressure port is located above the reservoir plate and designed with internal thread 0 10 PS stages Q [l/min] Q [USgpm] Delivery rate 1) Technical Data Mechanical design Variations Delivery rate Q max Delivery head H max Immersion depth t max 1250 l/min 105 m 670 mm Flange Shaft Mechanical seal NBR Extension tube Kinematic viscosity max. 30 mm 2 /s Delivery temperature 0 C to + C Grain size max. Ø4 mm Contamination max. 8,2 kg/m 3 Direction of rotation clockwise (as viewed looking down on the motor's ventilation side) Impeller Intermediate chamber Bearings Bushing Pumps bottom Deep groove ball bearing with covering disk Sintered iron Fluids delivered Emulsions, cooling and cutting oils, Water with rustproofing additives, heat carrier oil 1) Data for viscosity of ~1 mm²/s at a density of ~1 kg/dm³. Minimum volumetric flow: 5 to 10 % of nominal delivery rate.

6 spandaupumpen.com Centrifugal pumps 5 PS 01 Immersion pumps, sealless Hz, closed impellers k Ø m Ø l Ø2 / 4x Ø14 max. level of fluid t min. level of fluid Ø1 Electrical data, dimensions and weights at Hz Series Type of pump Frame size Stages Immersion depth t [mm] Voltage / Y U [V] Motor index Rated motor values Output P N [kw] Current / Y l N [A] Speed n N [min -1 ] Dimensions [mm] Øm k l Weight [kg] Sonic pressure [dba] Pressure port (DIN ISO 228) PS PSL H 1,26 4,07/2, K 2,6 7,5/4, / L 3,6 10,1/5, M 4,5 12,7/7, N 6,2 11, Δ O 8,6 14,

7 6 Centrifugal pumps spandaupumpen.com PS 03 Immersion pumps, sealless 50 Hz, closed impellers p [psi] H [m] PS ) 7-stages 50 Hz PS ) 6-stages PS stages Features Vertical multistage coolant pump For delivery of clean, polluted and viscous types of fluids Installation direcly into the reservoir Pressure port is located above the reservoir plate and designed with internal thread Delivery head 1) PS stages PS stages PS stages PS stages Q [l/min] Q [USgpm] Delivery rate 1) Technical Data Mechanical design Variations Delivery rate Q max Delivery head H max Immersion depth t max 1250 l/min 105 m 670 mm Flange Shaft Mechanical seal NBR Extension tube Kinematic viscosity max. 30 mm 2 /s Delivery temperature 0 C to + C Grain size max. Ø4 mm Contamination max. 8,2 kg/m 3 Direction of rotation clockwise (as viewed looking down on the motor's ventilation side) Impeller Intermediate chamber Bearings Bushing Pumps bottom Deep groove ball bearing with covering disk Sintered iron Fluids delivered Emulsions, cooling and cutting oils, Water with rustproofing additives, heat carrier oil 1) Data for viscosity of ~1 mm²/s at a density of ~1 kg/dm³. Minimum volumetric flow: 5 to 10 % of nominal delivery rate. 2) Frame sizes 0306 and 0307 available on request.

8 spandaupumpen.com Centrifugal pumps 7 PS 03 Immersion pumps, sealless 50 Hz, closed impellers k Ø m Ø l Ø2 / 4x Ø14 max. level of fluid t min. level of fluid Ø1 Electrical data, dimensions and weights at 50 Hz Series Type of pump Frame size Stages Immersion depth t [mm] Voltage / Y U [V] Motor index Rated motor values Output P N [kw] Current / Y l N [A] Speed n N [min -1 ] Dimensions [mm] Øm k l Weight [kg] Sonic pressure [dba] Pressure port (DIN ISO 228) PS PSL K 2,2 7,15/4, / M 4,0 13,0/7, N 5,5 11, O 7,5 14, Y 9,5 17, * 06* P * 0 Q * Frame sizes 0306 and 0307 available on request.

9 8 Centrifugal pumps spandaupumpen.com PS 03 Immersion pumps, sealless Hz, closed impellers p [psi] H [m] PS ) 7-stages Hz PS ) 6-stages PS stages Features Vertical multistage coolant pump For delivery of clean, polluted and viscous types of fluids Installation direcly into the reservoir Pressure port is located above the reservoir plate and designed with internal thread Delivery head 1) PS stages PS stages PS stages PS stages Q [l/min] Q [USgpm] Delivery rate 1) Technical Data Mechanical design Variations Delivery rate Q max Delivery head H max Immersion depth t max 1250 l/min 105 m 670 mm Flange Shaft Mechanical seal NBR Extension tube Kinematic viscosity max. 30 mm 2 /s Delivery temperature 0 C to + C Grain size max. Ø4 mm Contamination max. 8,2 kg/m 3 Direction of rotation clockwise (as viewed looking down on the motor's ventilation side) Impeller Intermediate chamber Bearings Bushing Pumps bottom Deep groove ball bearing with covering disk Sintered iron Fluids delivered Emulsions, cooling and cutting oils, Water with rustproofing additives, heat carrier oil 1) Data for viscosity of ~1 mm²/s at a density of ~1 kg/dm³. Minimum volumetric flow: 5 to 10 % of nominal delivery rate. 2) Frame sizes 0306 and 0307 available on request.

10 spandaupumpen.com Centrifugal pumps 9 PS 03 Immersion pumps, sealless Hz, closed impellers k Ø m Ø l Ø2 / 4x Ø14 max. level of fluid t min. level of fluid Ø1 Electrical data, dimensions and weights at Hz Series Type of pump Frame size Stages Immersion depth t [mm] Voltage / Y U [V] Motor index Rated motor values Output P N [kw] Current / Y l N [A] Speed n N [min -1 ] Dimensions [mm] Øm k l Weight [kg] Sonic pressure [dba] Pressure port (DIN ISO 228) PS PSL K 2,6 7,5/4, / M 4,5 12,7/7, N 6,2 11, O 8,6 14, Δ Y 11,0 17, * 06* P 12, * 0 Q * Frame sizes 0306 and 0307 available on request.

11 10 Centrifugal pumps spandaupumpen.com Immersion pumps, sealless Order key Series PS- = Standard design PSL = "Slurp" for air-polluted liquids Frame size To determine the frame size the corresponding characteristics has to be used. 01, 03 Stages To determine the desired number of stages the corresponding characteristics has to be used. 01 = 1-stages = 7-stages s G = gray cast iron (standard) Seal B = gap bush (standard) Pump design S = standard design V = bottom for extension tube Immersion depth in mm 250 = 250 mm = 670 mm Motor index To determine the desired motor index the appropriate table "Electrical data, dimensions and weights" has to be used. Example: J = 1,5 kw Power supply 01 = 230 /0 V at 50 Hz (to 4 kw) 265 /4 V at Hz (to 4,6 kw) 02 = 0 V at 50 Hz (from 5,5 kw) 4 V at Hz (from 6,3 kw) 05 = Standard for Europe 230/0 V at 50 Hz (from 4 kw) 0 V at 50 Hz (from 4 kw)... further designs on request Motor design BA = standard (insulation class F, IP 54, 2-pole, IE2)... further designs on request Order example: PS-0104GBS4M01BA Series: PS, Frame size: 01, 04-stages, : G grey cast iron, Seal: B gap bush, Pump design: S standard design, Immersion depth: 4 mm, Motor index: M 4,0 kw, Power supply: /0 V 50 Hz, 265/4 V Hz, Motor design: BA standard (IE2)

12 Notes

13 The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless our written permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication, but no liability can be accepted for any loss or damage whether direct, indirect or consequential, arising out of use of the information contained herein. SKF Lubrication Systems Germany GmbH Product department Spandau Pumps Motzener Strasse 35/ Berlin Germany PF Berlin Germany Tel. +49 (0) Fax +49 (0) SpandauPumpen@skf.com This brochure was presented by: 1-14-EN 11/15 Subject to change without notice.