PRA Centrifugal pumps
|
|
- Maude Sutton
- 5 years ago
- Views:
Transcription
1 EN PRA Centrifugal pumps Technical data Delivery rate Q max = 130 l/min Delivery head H max = 30 m Temperature range T = 5 C to 60 C Kinematic viscosity ν max = mm 2 /s Quality Management DIN EN ISO 01: 08 Environmental Management DIN EN ISO Health and Safety Management OHSAS
2 2 Centrifugal pumps spandaupumpen.com PRA 5, 6, 7, 8 Immersion pumps, sealless 50 Hz, open impellers p [psi] H [m] 9 50 Hz Features Delivery head 1) PRA 8K Vertical multistage centrifugal pump For delivery of slightly contaminated fluids Installation direcly into the reservoir Pressure port is located above the reservoir plate Pressure port is designed with internal thread G¾ according to DIN PRA 5K PRA 6K PRA 7K Q [l/min] Q [USgpm] Delivery rate 1) Technical Data Mechanical design Variations Delivery rate Q max 117 l/min Delivery head H max 5,4 m Flange Intake strainer Stainless steel Immersion depth t max 3 mm Shaft Extension tube PP PP Kinematic viscosity max. mm 2 /s Impeller Agitator blades Plastic Delivery temperature 5 C to 60 C Grain size max. ø 4 mm Contamination max. 94 g/m³ Intermediate chamber Pumps bottom (PRA 22, 27: LCP) (PRA 22, 27: LCP Direction of rotation Fluids delivered anti-clockwise (as viewed looking down on the motor's ventilation side) Emulsions, cooling and cutting oils, cleaning liquids, water, mild acids 1) Data for viscosity of ~1 mm²/s at a density of ~1 kg/dm³. Minimum volumetric flow: 5 to 10 % of nominal delivery rate.
3 t spandaupumpen.com Centrifugal pumps 3 PRA 5, 6, 7, 8 Immersion pumps, sealless 50 Hz, open impellers k Øm 25 G3/4 l Ø115/4xØ7 Ø max. level of fluid min. level of fluid 50 Electrical data, dimensions and weights at 50 Hz Series Type of pump Frame size Stages PRA 5K 5 01 PRA 6K 6 01 PRA 7K 7 01 PRA 8K 8 01 Immersion depth t [mm] Voltage / Y U [V] Motor index Rated motor values Output P N [kw] Current / Y l N [A] Speed n N [min -1 ] Dimensions [mm] Øm k l Weight [kg] 3,0 1 3, ,4 230/400 B 0,12 0,71 / 0, ,6 2 3, ,0 3,6 1 3, ,8 230/400 B 0,12 0,71 / 0, ,9 2 4, ,2 3,6 1 3, ,8 230/400 C 0,18 0,86 / 0, ,9 2 4, ,2 3,6 1 3, ,8 230/400 C 0,18 0,86 / 0, ,9 2 4, ,2 Sonic pressure [dba] Pressure port series (DIN ISO 228) 42 G¾ 44 G¾ 44 G¾ 45 G¾
4 4 Centrifugal pumps spandaupumpen.com PRA 5, 6, 7, 8 Immersion pumps, sealless 60 Hz, open impellers p [psi] H [m] 9 60 Hz Features Delivery head 1) PRA 7K PRA 8K Vertical multistage centrifugal pump For delivery of slightly contaminated fluids Installation direcly into the reservoir Pressure port is located above the reservoir plate Pressure port is designed with internal thread G¾ according to DIN PRA 5K PRA 6K Q [l/min] Q [USgpm] Delivery rate 1) Technical Data Mechanical design Variations Delivery rate Q max 130 l/min Delivery head H max 7,5 m Flange Intake strainer Stainless steel Immersion depth t max 3 mm Shaft Extension tube PP PP Kinematic viscosity max. mm 2 /s Impeller Agitator blades Plastic Delivery temperature 5 C to 60 C Grain size max. ø0,3 mm Contamination max. 50 g/m³ Intermediate chamber Pumps bottom (PRA 22, 27: LCP) (PRA 22, 27: LCP Direction of rotation Fluids delivered anti-clockwise (as viewed looking down on the motor's ventilation side) Emulsions, cooling and cutting oils, cleaning liquids, water, mild acids 1) Data for viscosity of ~1 mm²/s at a density of ~1 kg/dm³. Minimum volumetric flow: 5 to 10 % of nominal delivery rate.
5 t spandaupumpen.com Centrifugal pumps 5 PRA 5, 6, 7, 8 Immersion pumps, sealless 60 Hz, open impellers k Øm 25 G3/4 l Ø115/4xØ7 Ø max. level of fluid min. level of fluid 50 Electrical data, dimensions and weights at 60 Hz Series Type of pump Frame size Stages PRA 5K 5 01 PRA 6K 6 01 PRA 7K 7 01 PRA 8K 8 01 Immersion depth t [mm] Voltage / Y U [V] Motor index Rated motor values Output P N [kw] Current / Y l N [A] Speed n N [min -1 ] Dimensions [mm] Øm k l Weight [kg] 3,0 1 3, ,4 265/460 B 0,14 0,71 / 0, ,6 2 3, ,0 3,6 1 3, ,8 265/460 C 0,21 0,86/0, ,9 2 4, ,2 3,6 1 3, ,8 265/460 D 0,29 1,11/0, ,9 2 4, ,2 3,6 1 3, ,8 265/460 D 0,29 1,11/0, ,9 2 4, ,2 Sonic pressure [dba] Pressure port series (DIN ISO 228) 42 G¾ 44 G¾ 44 G¾ 45 G¾
6 6 Centrifugal pumps spandaupumpen.com PRA 12, 17, 22, 27 Immersion pumps, sealless 50 Hz, open impellers p [psi] H [m] 50 Hz Features Delivery head 1) PRA 27K 5 stages PRA 22K 4 stages PRA 17K 3 stages Vertical multistage centrifugal pump For delivery of slightly contaminated fluids Installation direcly into the reservoir Pressure port is located above the reservoir plate Pressure port is designed with internal thread G¾ according to DIN PRA 12K 2 stages Q [l/min] Q [USgpm] Delivery rate 1) Technical Data Mechanical design Variations Delivery rate Q max l/min Delivery head H max 23 m Flange Intake strainer Stainless steel Immersion depth t max 3 mm Shaft Extension tube PP PP Kinematic viscosity max. mm 2 /s Impeller Agitator blades Plastic Delivery temperature 5 C to 60 C Grain size max. ø0,3 mm Contamination max. 50 g/m³ Intermediate chamber Pumps bottom (PRA 22, 27: LCP) (PRA 22, 27: LCP Direction of rotation Fluids delivered anti-clockwise (as viewed looking down on the motor's ventilation side) Emulsions, cooling and cutting oils, cleaning liquids, water, mild acids 1) Data for viscosity of ~1 mm²/s at a density of ~1 kg/dm³. Minimum volumetric flow: 5 to 10 % of nominal delivery rate.
7 t spandaupumpen.com Centrifugal pumps 7 PRA 12, 17, 22, 27 Immersion pumps, sealless 50 Hz, open impellers k Øm 25 G3/4 l Ø115/4xØ7 Ø max. level of fluid min. level of fluid 50 Electrical data, dimensions and weights at 50 Hz Series Type of pump Frame size Stages PRA 12K PRA 17K PRA 22K PRA 27K Immersion depth t [mm] Voltage / Y U [V] Motor index Rated motor values Output P N [kw] Current / Y l N [A] Speed n N [min -1 ] Dimensions [mm] Øm k l Weight [kg] 130 4, , ,7 230/400 E 0,37 1,72 / , ,, , ,7 0 4,8 2 4,9 230/400 E 0,37 1,72 / , , ,2 0 6, , ,8 230/400 G 0,63 2,4/1, , , , , ,2 2 7,6 230/400 G 0,63 2,4/1, , , ,5 Sonic pressure [dba] Pressure port series (DIN ISO 228) 48 G¾ 48 G¾ 54 G¾ 54 G¾
8 8 Centrifugal pumps spandaupumpen.com PRA 12, 17, 22, 27 Immersion pumps, sealless 60 Hz, open impellers p [psi] H [m] 60 Hz PRA 27K 5-stages 25 PRA 22K 4-stages 30 Features Vertical multistage centrifugal pump For delivery of slightly contaminated fluids Installation direcly into the reservoir Delivery head 1) PRA 17K 3-stages PRA 12K 2-stages Pressure port is located above the reservoir plate 5 Pressure port is designed with internal thread G¾ according to DIN Q [l/min] Q [USgpm] Delivery rate 1) Technical Data Mechanical design Variations Delivery rate Q max l/min Delivery head H max 30 m Flange Intake strainer Stainless steel Immersion depth t max 3 mm Shaft Extension tube PP PP Kinematic viscosity max. mm 2 /s Impeller Agitator blades Plastic Delivery temperature 5 C to 60 C Grain size max. ø0,3 mm Contamination max. 50 g/m³ Intermediate chamber Pumps bottom (PRA 22, 27: LCP) (PRA 22, 27: LCP Direction of rotation Fluids delivered anti-clockwise (as viewed looking down on the motor's ventilation side) Emulsions, cooling and cutting oils, cleaning liquids, water, mild acids 1) Data for viscosity of ~1 mm²/s at a density of ~1 kg/dm³. Minimum volumetric flow: 5 to 10 % of nominal delivery rate.
9 t spandaupumpen.com Centrifugal pumps 9 PRA 12, 17, 22, 27 Immersion pumps, sealless 60 Hz, open impellers k Øm 25 G3/4 l Ø115/4xØ7 Ø max. level of fluid min. level of fluid 50 Electrical data, dimensions and weights at 60 Hz Series Type of pump Frame size Stages PRA 12K PRA 17K PRA 22K PRA 27K Immersion depth t [mm] Voltage / Y U [V] Motor index Rated motor values Output P N [kw] Current / Y l N [A] Speed n N [min -1 ] Dimensions [mm] Øm k l Weight [kg] 130 4, , ,7 265/460 E 0,42 1,72 / 1, , , , ,7 0 4,8 2 4,9 265/460 E 0,42 1,72 / 1, , , ,2 0 6, , ,8 265/460 G 0,73 2,4 / 1, , , , , , /460 G 0,73 2,4 / 1, ,6 3 8, ,5 Sonic pressure [dba] Pressure port series (DIN ISO 228) 48 G¾ 48 G¾ 54 G¾ 54 G¾
10 Notes
11 Notes
12 The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless our written permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication, but no liability can be accepted for any loss or damage whether direct, indirect or consequential, arising out of use of the information contained herein. SKF Lubrication Systems Germany GmbH Product department Spandau Pumps Motzener Strasse 35/ Berlin Germany PF Berlin Germany Tel. +49 (0) Fax +49 (0) SpandauPumpen@skf.com This brochure was presented by: EN 04/17 Subject to change without notice.
PS/PSL Centrifugal pumps
1 14 EN Centrifugal pumps Technical Data Delivery rate Q max = 1250 l/min Delivery head H max = 110 m Delivery temperature T = 0 C to + C Kinematic viscosity ν max = 30 mm 2 /s Quality Management DIN EN
More informationPSR Centrifugal pumps
1 65 EN Centrifugal pumps Technical data Delivery rate Q max = 180 l/min Delivery head H max = 255 m Temperature range T = -10 C to +80 C Kinematic viscosity ν max = mm 2 /s Quality Management DIN EN ISO
More informationPMS Centrifugal pumps
1 6033 EN Centrifugal pumps Technical data Delivery rate Q max = 400 l/min Delivery head H max = 45 m Delivery temperature T = 0 C bis +0 C Kinematic viscosity ν max = 20 mm 2 /s Quality Management DIN
More informationPS/PSL Centrifugal pumps
1 14 EN Centrifugal pumps Technical Data Delivery rate Q max = 1250 l/min Delivery head H max = 110 m Delivery temperature T = 0 C to + C Kinematic viscosity ν max = 30 mm 2 /s Quality Management DIN EN
More informationCentrifugal pumps. Main catalogue.
Main catalogue 1 6667 EN Centrifugal pumps for machine tools and filter systems, printing and packaging machines, temperature control units Quality Management DIN EN ISO 9001:08 www.spandaupumpen.com Environmental
More informationPAB Atex-certified centrifugal pumps
1 6036 EN PAB Atex-certified centrifugal pumps Technical data Delivery rate Q max = 305 l/min Delivery head H max = 20 m Temperature range 0 C to +60 C Quality Management DIN EN ISO 9001: 2008 Environmental
More informationImmersion Pumps PMS and PMS-T sealless
Immersion Pumps PMS and PMS-T sealless 1-6033-EN Centrifugal pumps of metal with high resistance to wear for diverse industrial fluids Technical data Delivery rate Q max = 400 l/min Delivery head H max
More informationLMP screw pumps for delivery pressures up to 120 bar
1 64 EN LM screw pumps for delivery pressures up to 12 bar Technical data Delivery rate max. = 67 l/min Delivery pressure p max. = 12 bar Temperature range C to +8 C Kinematic viscosity 1 to 2 mm 2 /s
More informationElectric Immersion Pumps PXA and PXK, sealless
1-6062-US PXA and PXK, sealless MQUALITY MANAE ENT Cooling and lubricating with high-pressure... Centrifugal pumps for delivery pressures up to 25 bars Technical data Delivery rate Q max = 185 l/min Delivery
More informationCompact Units. For fluid grease, NLGI grades 000, 00 Group MKF 0.1 or 0.2 l/min EN
1-16-EN Compact Units For fluid grease, NLGI grades, Group MKF.1 or.2 l/min MKF1-KW2-2 MKF2-KW3-2 MKF2-KW6-22 These MKFcompact units were developed to supply intermittently operated single-line centralized
More informationUD and UC Gear pump unit
1-19-EN for SKF CircOil or hydraulic lubrication systems General Information The UC and UD gear pump units are vertically or horizontally arranged units that are used in hydraulic or circulating-oil lubrication
More informationElectric Immersion Pumps PRT and PRA, sealless
PRT and, sealless MQUALITY MANAGE ENT Centrifugal pumps of plastic for a wide variety of industrial fluids Technical data Delivery rate Q max = 20 l/min Delivery head H max = 32 m Temperature range -30
More informationPPU, PHU Piston Pumps for progressive grease and oil systems, pneumatically or hydraulically actuated
1-0107-5-EN PPU, PHU Piston Pumps for progressive grease and oil systems, pneumatically or hydraulically actuated These piston pumps are available with two different delivery rate ranges. The pumps can
More informationGrease Pump Units For progressive and multiline systems, manually, pneumatically or hydraulically actuated
1-0107-4-EN Grease Pump Units For progressive and multiline systems, manually, pneumatically or hydraulically actuated PF-23-2 PFP-23-2 PFH-23-2 Single- and dual-circuit piston pumps are designed for the
More informationImmersion Pumps PS and PSL ( Slurp Pump ) sealless
Immersion Pumps PS and PSL ( Slurp Pump ) sealless 1-6014-US Centrifugal pumps of metal for clean, polluted and viscous fluids Technical data Delivery rate Q max = 1250 l/min Delivery head H max = 105
More informationGrease Pump Units. For progressive and multiline systems, manually, pneumatically or hydraulically actuated. Please note!
1-0107-4-EN Grease Pump Units For progressive and multiline systems, manually, pneumatically or hydraulically actuated PF-23-2 PFP-23-2 PFH-23-2 Single- and dual-circuit piston pumps are designed for the
More informationElectric Immersion Pumps PT sealless EN
Electric Immersion Pumps PT sealless 1 6017 EN 1 6017 US Peripheral impeller pumps of high tech plastic for clean fluids Technical data Delivery rate Q max = 23 l/min Delivery head H max = 35 m Temperature
More informationInjection oilers, micro pumps for minimal quantity metering
1-5012-4-EN Injection oilers, micro pumps for minimal quantity metering Injection oiler, 3-port type Injection oiler, 1-port type Micro pump Delivery rates Metering pumps deliver lubricants in a measured
More informationSP/SMT 1 Flow Divider
1-5017-EN S/SMT 1 Flow Divider with and without inline strainer for circulating-oil or hydraulic systems Introduction The flow divider splits the supplied flow into two equal induvidual flows or into two
More informationAccessories for Minimal Quantity Metering
1-5012-5-EN Accessories for Minimal Quantity Metering for chain lubrication and surface wetting Brush Spray head Flow volume divider Nozzles Pinpoint application of metered quantities of oil Brushes Storage
More informationFlow Monitors and Sensors
1-1704-EN Flow Monitors and Sensors for intermittent and circulating centralized lubrication systems Flow monitor Flow sensor Oil-streak sensor Flow monitors/sensors have the task of monitoring the flow
More informationDirectional Valves for oil or grease
1-173-EN Directional Valves for oil or grease 161-1-31 161-1-5 DV5-4 Function he directional valves listed on the following pages are used to control the flow of lubricants, e.g. to divide up a central
More informationImmersion Pumps PRG sealless
Immersion Pumps PRG sealless 1-6007-US Centrifugal pumps of plastic for clear or turbid fluids Technical data Delivery rate Q max = 60 l/min Delivery head H max = 32 m Temperature range 20 C to +60 C Product
More informationElectric Plug-and-Socket Connectors
-70-EN Electric Plug-and-Socket Connectors Sockets for pressure switches, level switches, flow sensors, directional control valves and filters DIN EN 750-80/ISO 4400 DIN EN 750-804 M Electric plugs or
More informationSingle-Line Centralized Lubrication Systems
1-15-EN Single-Line Centralized Lubrication Systems For fluid grease, NLGI grades, PFE-15-1. PF-289 MFE2-KW6F-S1 U1 U2 U3 The layout of a single-line centralized lubrication system for grease is largely
More informationInexpensive solution for the lubrication of linear guides and rolling bearings
1-0988-EN Compact Greaser Inexpensive solution for the lubrication of linear guides and rolling bearings Compact Greaser Up to 5 lubricant outlet ports 3 different metered volumes (15 mm 3 standard) Suitable
More informationManually or pneumatically actuated Piston pumps
Manually or pneumatically actuated Piston pumps For oil and fluid grease For use in SKF MonoFlex single-line centralized lubrication systems These manually or pneumatically actuated piston pumps were designed
More informationStandard filter Disk filter Return filter. Lubrication systems can fail from the following
Filters For oil For use in SKF centralized lubrication systems Standard filter Disk filter Return filter Why filtering? Solids are diagnosed to be the main cause of damages on the components that are used
More informationSystem description for cylinder lubrication and valve seat lubrication on large 4-stroke diesel engines
for cylinder lubrication and valve seat lubrication on large 4-stroke diesel engines Valve seat lubrication Cylinder lubrication Version 04 Page 2 for cylinder lubrication and valve seat lubrication on
More informationManually or pneumatically actuated piston pumps
Manually or pneumatically actuated piston pumps Product series Pxx For oil and fluid grease For use in SKF MonoFlex single-line centralized lubrication systems Manually or pneumatically actuated piston
More informationStandard filter Disk filter Return filter. Lubrication systems can fail from the following
Filters For oil For use in SKF centralized lubrication systems Standard filter Disk filter Return filter Why filtering? Solids are diagnosed to be the main cause of damages on the components that are used
More informationSKF VectoLub, accessories Accessories for the minimal quantity lubrication systems VTEC and VE1B EN
SKF VectoLub, accessories Accessories for the minimal quantity lubrication systems VTEC and VE1B 1-4402-EN Spray blocks Every spraying unit is connected to the coaxial outlet of a VTEC or VE1B unit. It
More informationFlow limiter SP/SMB9 for mounting plates
1-3002-EN Flow limiter SP/SMB for mounting plates Advantages reliable perpetual dispensation of individual volume flows - self-adjusting metering, thus identical volume flows despite different back pressures.
More informationLMP screw pumps for delivery pressures up to 120 bar
1 64 EN LM screw pumps for delivery pressures up to 12 bar Technical data Delivery rate max. = 67 l/min Delivery pressure pmax. = 12 bar Temperature range C to + 8 C Kinematic viscosity 1 to 25 mm2/s uality
More informationFlow limiter SP/SMB13 for line installation in circulating-oil lubrication systems.
1-3004-EN Flow limiter SP/SMB13 for line installation in circulating-oil lubrication systems. Flow limiters are used in circulating-oil lubrication systems. The task of a flow limiter is to divide up the
More informationFor high-viscosity oils and fluid grease of NLGI grades 000, 00 For use in SKF MonoFlex single-line centralized lubrication systems
Gear pump unit roduct series KFB For high-viscosity oils and fluid grease of NLGI grades 000, 00 For use in SKF MonoFlex single-line centralized lubrication systems SKF gear pump units of the KFB product
More informationBlock feeder SPVS Used in oil or grease lubrication systems
1-3029-EN Block feeder SPVS Used in oil or grease lubrication systems Block feeders of the SPVS series are used in grease and oil total loss lubrication systems. They are used to either increase the number
More informationSF6. EBARA PUMPS EUROPE S.p.A. SUBMERSIBLE PUMPS. Page - CONTENTS 100
SPECIFICATIONS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CHART R10 204 PERFORMANCE CHART R13 205 PERFORMANCE CHART S25 206 PERFORMANCE
More informationSF6. EBARA PUMPS EUROPE S.p.A. SUBMERSIBLE PUMPS. Page - CONTENTS 100
SPECIFICATIONS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CHART R10 204 PERFORMANCE CHART R13 205 PERFORMANCE CHART S25 206 PERFORMANCE
More informationCRK 2-60/6 AWA-BUBV 075KW 3X400V 50HZ
GRUNDFOS DATA BOOKLET CRK 2-6/6 AWA-BUBV 75KW 3X4V 5HZ Grundfos Pump 49716 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crk2/49716/crk-2-6-6-a-w-a-auuv.html
More informationInjection oilers, micro pumps
1-5012-4-EN Injection oilers, micro pumps for minimal quantity metering Injection oiler, 3-port type Injection oiler, 1-port type Micro pump Delivery rates Metering pumps deliver lubricants in a measured
More informationBlock feeder SPVS Used in oil or grease lubrication systems
1-3029-EN Block feeder SPVS Used in oil or grease lubrication systems Block feeders of the SPVS series are used in grease and oil total loss lubrication systems. They are used to either increase the number
More informationCompany name: Created by: Phone: Note! Product picture may differ from actual product
Date: 13/03/2017 Tender Text Note! Product picture may differ from actual product Product No.: 98993055 MTH4-5/5 A-W-A-AQQV Multistage, immersible, self-priming, centrifugal pump for vertical installation
More informationFor grease For application in SKF DuoFlex dual-line centralized lubrication systems
Change-over valves, differential pressure switch ccessories for Dual-line Systems For grease For application in SKF DuoFlex dual-line centralized lubrication systems Change-over valves Hydraulical or electrical
More informationGrease Lubrication Pump FK
1-3033-EN 1-0358-US for use in progressive, single-line and dual-line centralized lubrication systems pplication he FK pump unit is a multi-function piston pump whose modular structure makes it very versatile.
More informationFlow limiter SP/SMB10 Dual flow series
1-00-EN Dual flow series Advantages reliable - Parallel distribution of individual flow quantities - self-regulating metering with pressure balancing valve, thus constant volumetric flows even for different
More information" " (495) For oil For continuous monitored lubrication with minimum quantities from 0,5 to 5 mm³/min
System integration only in close cooperation with SKF Portfolio management Microdosage system MDS Product series MDx For oil For continuous monitored lubrication with minimum quantities from 0,5 to 5 mm³/min
More informationCRK 2-180/18 A-W-A-AUUV 3x380 /415Y V
GRUNDFOS DATA BOOKLET CRK 2-18/18 A-W-A-AUUV 3x38 /415Y V Grundfos pump 497218 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crk2/497218/crk-2-18-18-a-w-a-auuv.html
More informationCentrifugal pumps type T. Version
type T Version 4-215 Content Layout and areas of application for the KNOLL centrifugal pump... 3 Pump overview... 4 Type key and standard multirange motors... 5 Clean coolant pump TG 2...6 Clean coolant
More informationMotor-driven pump unit GSJB
1-4002-1-EN Motor-driven pump unit GSJB Multi-outlet pump units with oil or grease reservoir designed for centralized lubrication systems The motor-driven pump units GSJB have been especially designed
More informationJM Oil Lubrication Pump SKF MultiFlex multi-line pump units for total loss oil lubrication systems on compressors
1-3007-EN SKF MultiFlex multi-line pump units for total loss oil lubrication systems on compressors General Information The JM oil lubrication pump is a highpressure multiline pump that produces a maximum
More informationFlow limiter SP/SMB3 Flow limiter SP/SMB6
-00-EN Flow limiter SP/SMB Flow limiter SP/SMB6 for circulating-oil lubrication systems Advantages reliable perpetual dispensation of individual volume flows - self-adjusting metering, thus identical volume
More informationAxial Piston Fixed Pump A17FNO Series 10
Axial Piston Fixed Pump A17FNO Series 10 RE 91510 Issue: 06.2012 Replaces: 03.2010 Size 125 Nominal pressure 250 bar Maximum pressure 300 bar For commercial vehicles Open circuit Features Fixed pump with
More informationProduct designation. Original assembly instructions with associated operating instructions acc. to EC Machinery Directive 2006/42/EC.
Product designation Centrifugal pump Product series: PR / PRG / PRT / PRA... / HCT... / PRK Original assembly instructions with associated operating instructions acc. to EC Machinery Directive 2006/42/EC
More informationChain lubrication, accessories
1-106-EN Chain lubrication, accessories Nozzles, oiling brushes, reservoirs and other accessories for chain lubrication Oil projection nozzle AC-A Compact design, pinpoint accuracy, and high temperature
More informationFeed Pumps VP / VPB / VPBM
Feed Pumps VP / VPB / VPBM Symbol General The feed pumps from the VP series are low-noise, single-stroke vane pumps with constant flow rate. Using a damped bell housing (PT) enables noise levels to be
More informationPTEX extruder pumps Pneumatic extruder pump for drums of grease up to NLGI grade 2
1-4009-EN PTEX extruder pumps Pneumatic extruder pump for drums of grease up to NLGI grade 2 The PTEX extruder pumps are pneumatically actuated pumps designed to deliver lubricant under pressure to lubrication
More informationCRK 2-180/18 A-W-A-AUUV 3x230/400V 60HZ
GRUNDFOS DATA BOOKLET CRK 2-18/18 A-W-A-AUUV 3x23/4V 6HZ Grundfos pump 497178 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crk2/497178/crk-2-18-18-a-w-a-auuv.html
More informationLinear actuator CAHM-31. Benefits. Modular Robust Reliable High speed and/or high load All metal design. Picture CAHM-3130-LS0300-D1-010
www.lmotion.ru lmotion-mail@ya.ru Тел.: (495)-921-34- Linear actuator CAH- Benefits odular Robust Reliable High speed and/or high load All metal design Picture CAH-3-LS3-D1-1 www.lmotion.ru lmotion-mail@ya.ru
More informationChain lubrication, accessories Nozzles, oiling-brushes, reservoirs and other accessories for the chain lubrication EN
Nozzles, oiling-brushes, reservoirs and other accessories for the chain lubrication 1-106-EN 16 10,5 16 10,5 ~ ~ Chain lubrication, accessories Oil projection nozzle AC-A Compact design, pinpoint accuracy,
More informationHigh-pressure pumps Series HP45
High-pressure pumps Series HP45 www.andritz.com/pumps General Description / Application Multi-stage high pressure pumps for water supply, irrigation and industrial applications, for hot and cold water
More informationSubmersible Borehole Pump. UPAchrom. 4", UPAchrom 100 CC + DN 100. Type Series Booklet
Submersible Borehole Pump UPAchrom 4", UPAchrom 1 CC + DN 1 Type Series Booklet Legal information/copyright Type Series Booklet UPAchrom All rights reserved. The contents provided herein must neither be
More informationAir-oil centralized lubrication systems
Air-oil centralized lubrication systems A lubrication system should always be as modern and efficient as the machine it is lubricating. Lincoln air-oil systems are ideally suited for this because they
More informationPage - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE DIMENSIONS AND WEIGHT 400 PUMP DRAWING 400 DIMENSION PUMP TABLE 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE R10 205 PERFORMANCE CURVE R13 206 PERFORMANCE CURVE S25 207 PERFORMANCE CURVE S32 208 PERFORMANCE
More informationSubmersible Borehole Pump. UPAchrom. 4", UPAchrom 100 CC + DN 100. Type Series Booklet
Submersible Borehole Pump UPAchrom 4", UPAchrom 1 CC + DN 1 Type Series Booklet Legal information/copyright Type Series Booklet UPAchrom All rights reserved. The contents provided herein must neither be
More informationPTFE seals for screw compressors
PTFE seals for screw compressors Customized and off-the-shelf sealing solutions from SKF The Power of Knowledge Engineering If you know SKF just for bearings, you only know half the story SKF is your source
More informationProduct series DigitalSuper
Minimal quantity lubrication (MQL) SKF LubriLean Product series DigitalSuper Extended product range with enhanced performance and state-of-the-art communication Products and applications The innovative
More informationTLT. Standards. Telescopic pillar. Very small built-in dimension EN/IEC UL Powerful
TLT Telescopic pillar Very small built-in dimension Powerful Standards EN/IEC 661 1 UL 661 1 Technical data Unit TLT1 A1 TLT1 A2 TLT1 B1 TLT1 C1 TLT1 C2 Rated push load N 3 4 2 1 2 Rated pull load N Bending
More informationIPVS High-pressure Internal Gear Pumps Technical Data Sheet
IPVS High-pressure Internal Gear Pumps Technical Data Sheet Functional Drawing 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing segment 5 Axial
More informationAxial Piston Variable Pump A2VK
Axial Piston Variable Pump A2VK RE 94001/06.10 1/12 Replaces: 07.04 Data sheet Size 12 to 107 Series 1 and 4 Nominal pressure 250 bar Maximum pressure 315 bar Version for pumping plastic components Contents
More informationSKF VectoLub, VE1B units
1-4403-EN SKF VectoLub, VE1B units External minimal quantity lubrication, Volumetric metering The emql system SKF VectoLub is a clean and economical alternative for lubricant projection in minimal quantity.
More informationLubrigun lubrication unit
User and maintenance instructions Lubrigun lubrication unit Models 91, 989, 8626 with air operated grease pumps 8200, 8216, 8100*, 802330* and 8313 Date of issue July 201 Form number 403404 Version 2 *
More informationCRT 16-4 A-P-A-E-AUUE 4kW 3x400D 50Hz
GRUNDFOS DATA BOOKLET CRT 16-4 A-P-A-E-AUUE 4kW 3x4D 5Hz Grundfos Pump 96117246 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crt16/96117246/crt-16-4-a-p-a-e-auue.html
More informationCRT 2-4 A-P-A-E-AUUE 055kW 400Y 50Hz
GRUNDFOS DATA BOOKLET CRT 2-4 A-P-A-E-AUUE 55kW 4Y Hz Grundfos Pump 9633 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crt2/9633/crt-2-4-a-p-a-e-auue.html
More information- CONSTRUCTIONS 300 SECTIONAL VIEW (4N1 4N2 4N4) 300 SECTIONAL VIEW (4N7 4N10 4N15) 301 SECTIONAL VIEW TABLE 302 ITEM QUANTITY FOR MODEL 303
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART 202 TYPE KEY 203 PERFORMANCE CHART 4N1 204 PERFORMANCE CHART 4N2 205 PERFORMANCE CHART 4N4 206 PERFORMANCE CHART 4N7
More informationMaximizing performance. Radial shaft seals HMS5 and HMSA10 Longer service life Improved sealing performance Excellent oil compatibility
Maximizing performance Radial shaft seals HMS5 and HMSA10 Longer service life Improved sealing performance Excellent oil compatibility Radial shaft seals HMS5 and HMSA10 Main features SKF metric line of
More informationCentrifugal pumps. Version
Version 08-2018 2 Content KNOLL.It works... 4 Layout and areas of application for the KNOLL centrifugal pump....6 Type key and standard multirange motors....7 Frequency inverter (FI)...8 Block pumps...10
More informationCRT 8-20 A-P-A-E-AUUE 11kW 3x400D 50Hz
GRUNDFOS DATA BOOKLET CRT 8-2 A-P-A-E-AUUE 11kW 3x4D 5Hz Grundfos Pump 96117234 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crt8/96117234/crt-8-2-a-p-a-e-auue.html
More informationIPVP High-pressure Internal Gear Pumps for Variable Speed Drives
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Design and Function 7 6 5 9 2 5 6 7 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing
More informationLPC. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 32 205 40 206 50 210 65 213 80 216 100 218 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 302 - DIMENSIONS
More information- continuos running: max ±5%. - intermittent running: max ±10%. Voltage imbalance between phases: max 2%. Maximum number of starts per hour: 30.
Submersible Electric Pumps GLS Series MARKET SECTORS RESIDENTIAL AND COMMERCIAL BUILDINGS, INDUSTRIES. APPLICATIONS Submersible pump for pumping clean water, surface water and wastewater containing solids
More informationFeed Pumps Direct Drive Series 1.1.
1.1. FEED PUMP SERIES FZP AND MFZP 1. GENERAL The feed pump, type FZP, is a direct drive vane pump with constant flow rate. It is available with flanged motor (MFZP) and comes with internal pressure relief
More informationIPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet Design and Function 7 6 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b
More informationLinear actuator CAR 32. Benefits. Industrial reliable and robust actuator Wide range of components Right- and left-hand version
Linear actuator CAR 3 Benefits Industrial reliable and robust actuator Wide range of components Right- and left-hand version CAR 3 Linear actuators Suitable control units and accessories Dimensional drawing
More informationGrease-lubricating pump FF... DSK US (05.05)
Grease-lubricating pump FF... DSK 2-008-00-US (05.05) electrically operated, for small and medium-sized multiple-line and progressive systems PSG-2 with cycle switch VPB with cycle switch PSG-2 with cycle
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 ITEM QUANTITY FOR MODEL 302 INTERMEDIATE CASING WITH BEARING POSITION 303
SPECIFICATIONS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY 203 PERFORMANCE CHART 2 204 PERFORMANCE CHART 4 205 PERFORMANCE CHART 7 206 PERFORMANCE CHART 15 207 - CONSTRUCTIONS
More informationEIPS2 INTERNAL GEAR PUMPS
EIPS2 INTERNAL GEAR PUMPS Internal gear pump Type with constant displacement volume Characteristics Internal gear pump with axial and radial gap compensation Radial compensation with segments Pressure
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 ITEM QUANTITY FOR MODEL 302 INTERMEDIATE CASING WITH BEARING POSITION 303
SPECIFICATIONS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY 203 PERFORMANCE CHART 2 204 PERFORMANCE CHART 4 205 PERFORMANCE CHART 7 206 PERFORMANCE CHART 15 207 - CONSTRUCTIONS
More informationAir-oil centralized lubrication systems
Air-oil centralized lubrication systems A lubrication system should always be as modern and efficient as the machine it is lubricating. Lincoln air-oil systems are ideally suited for this because they
More informationSIL Inline Single Stage Centrifugal Pumps
SIL Inline Single Stage Centrifugal Pumps SIL Inline Pump Range True Reliability Sulzer s new inline pump range (SIL) has been designed to fulfill efficiency regulations across all industries and also
More informationChange-Over Pressure Filter DFDK
Change-Over Pressure Filter up to 2500 l/min, up to 315 bar 30 60 110 140 160 240 280 330 500 660 1.x 660 2.x 990 2.x 1320 2.x 1320 3.x 2640 3.x 3960 3.x 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING
More informationDr. TRETTER AG. Tolerance Rings. safe cost-effective fast assembly
Dr. TRETTER AG Tolerance Rings safe cost-effective fast assembly Tolerance Rings are corrugated metal strips manufactured of high quality spring steel. Tolerance Rings are a fastening device between two
More informationTPHK Series Immersible Pump
TPHK Series Immersible Pump Instruction Manual ISO 9001 Certified WALRUS PUMP CO., LTD. EC Declaration of Conformity Manufacturer: Walrus Pump Co., Ltd. Address: No.83-14, Dapiantou, Sanzhi Dist., New
More informationLinear actuator CAT 32B. Benefits. Compact Robust Modular Lubricated for service life High efficiency Digital encoder feedback
Linear actuator CAT 3B Benefits Compact Robust Modular Lubricated for service life High efficiency Digital encoder feedback CAT 3B Linear actuators Suitable control units and accessories Dimensional drawing
More informationSCUBA, GS, Z6-ZN6 SERIES
4-5 - 6 SUBMERSIBLE ELECTRIC PUMPS 50 Hz SCUBA, GS, Z6-ZN6 SERIES EDITION 02-2006 CONTENTS Scuba Series Specifications... 3 Scuba Series, hydraulic performance range at 50 Hz... 5 Scuba Series, dimensions
More informationVertical Immersion Pump VTP - BBF
MB / General VTP centrifugal pumps in block design (BBF) correspond to the system of two-pipe pumps. Basically these immersion pumps are single-level immersion pumps with vertical axis the main components
More informationHM...TRI. Turbine Flow Meters (Tri-Clamp) for pharmaceutical Applications. Technical Datasheet
www.kem-kueppers.com Certified according to DIN EN ISO 9001 Technical Datasheet HM...TRI Turbine Flow Meters (Tri-Clamp) for pharmaceutical Applications HM-TRI_D_EN_150922_E003 Application Turbine flow
More informationAxial Piston Variable Pump A2VK
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Axial Piston Variable Pump A2VK RE 94001/06.10 1/12 Replaces: 07.04 Data sheet Size 12 to 107 Series 1
More informationCentrifugal pump T. Version
Version 04-2017 Content Layout and areas of application for the KNOLL centrifugal pump...4 Pump overview...6 ype key and standard multirange motors... 7 Frequency inverter (FI)...8 Clean coolant pumps...10
More informationP653S Centro-Matic oil pump
P653S Centro-Matic oil pump Provides performance, dependability and versatility Suitable for multiple applications, the Lincoln P653S electrically driven oil pump simplifies the design of your lubrication
More information