Directional Valves for oil or grease

Size: px
Start display at page:

Download "Directional Valves for oil or grease"

Transcription

1 1-173-EN Directional Valves for oil or grease DV5-4 Function he directional valves listed on the following pages are used to control the flow of lubricants, e.g. to divide up a central lubrication system into a number of lube circuits (zoned actuation) or to switch between circulating and intermittently operated lube circuits. Valves for a maximum pressure of up to about bars can be used for single-line lubrication systems with piston distributors. Valves for a pressure range of up to or 5 bars are suitable for progressive systems.

2 Directional valves should be selected using the following criteria: 2, 3 or 4-way valve switching functions range of valve pressures flow rate of the valves lubricant for which the valve is to be used oils with a low or high effective viscosity, greases up to NLGI grade 2. he valve data are listed in two tables, subdivided into: hydraulic and mechanical characteristics electrical characteristics. See important product usage information on the back cover. *) Flow coefficient 1) = characteristic curve 2) =baseplate 3) Max. 16 bars with connection 4) Remains in the last switching position selected Hydraulic / mechanical characteristics mbient temperature Materials Max. pressure Lubricants Lubricant temperature oil [ ] Oil Manual actuation Fig. Grease [ ] Housing Seals Oil [ ] Grease NLGI 2 [mbar] [mm 2 /s] [bar] D [bar] Flow rate max. [l/min] onnection threads Fc *) value Rated width asic position ype Valve function Order No /2 closed seat valve 1,2,8 G 1 / to +8 to + l NR yes /2 closed ball seat v. G 1 / 4 cf. KL. 1) max. 7 to to +8 l yes /2 closed ball seat v. G 1 / 4 cf. KL. 1) to +8 l yes /2 closed seat valve,8,4 G 1 / to +1 to + l NR yes /2 closed seat valve,8,35 cf. G 2) to +1 to + l NR yes M 1 yes 4 to like but 2-8 individual valves installed as valve manifold /2 open -> ball seat v. G 1 / 4 cf. KL. 1) max. 7 to to +8 l yes /2 open -> ball seat v. G 3 / 8 cf. KL. 1) max. 7 to to +8 l yes /2 geschlossen ball seat v. G 1 / to +8 l yes /2 open -> sliding cf. KL. 1) cf. G 2) 8 (NG 6) 32 3) 2-25 to +75 l yes /2 open -> sliding cf. KL. 1) cf. G 2) cf. KL. 1) 32 3) to to +5 l yes 8 sliding 1 M max to to to +8 l no 7 4) DV5-4 5/ EN

3 1) lease indicate voltage, type of current and frequency when ordering Electrical characteristics Electrical onnections Switching time OFF [ms] Switching time ON [ms] Insulation class ype of enclosure ON time Rated power vailable voltages 1) Rated current [] Order No. H DIN EN : 16 V, 8 W D: W Standard 24 V D D and F DIN EN at max V D W F 125 DIN EN at W 2 V 115 V 5 or 6 Hz H DIN EN at +2 W at 24 V D 8 W at 22 V, 5 Hz D and H DIN EN : W D: 8 W D and H DIN EN : W D: 8 W D and to F 7 2 DIN EN DIN 4365-F3 2. at 12 V D 1. at 24 V D.14 at 22 V, 5/6 Hz D and F 5 DIN EN at max W 1.7 at 12 V D.83 at 24 V D 12 V D 24 V D F 5 DIN EN at max W 1.7 at 12 V D.83 at 24 V D 12 V D 24 V D DIN EN at 24 V D.17 at 22 V, 5 Hz D and DIN EN W at 24 V D 12 V at 22 V, 5 Hz D and DV V D ±25 %,2 (start-up current 1.4) 5 W M EN 3

4 Fig. 1 Fig ; (individual valve for manifolds to -38) 22 M5 22 he socket box has to be ordered separately order No he scope of delivery includes: 2 O-rings ø3x1.6 2 countersunk head scres DIN 936-M4 2 Manual actuation he socket box has to be ordered separately. () 24 7 ~73 32 = G1/ G1/ Overshoot has to be assured! Graphical symbol for Graphical symbol for Fig ; Manual actuation 5 21 View Z Swivels 18 1) g 9 M 6 deep ) With socket box; if there is a need for DIN EN , it has to be ordered separately; e.g (with LED, protective circuit and integrally extruded 3 m long UR cable). Graphical symbol for haracteristic p Q (recommended value) with an oil viscosity ~ 6 mm 2 /s and Z Flow resistance p [bar] Graphical symbol for Flow current Q [l/min] EN

5 Fig to Manual actuation L L1 Order No. Number of valves L1 L Fig ; nual actuation Swivels 18 or ) ep (4x) 5 L1 ød View Z 22.5 ød 5 L1 ød L2 V1Z 15 haracteristic p Q (recommended value) with an oil viscosity ~ 6 mm 2 /s and Order No ød L1 L G3/ Z Flow resistance p [bar] 2 2 a Flow current Q [l /min] urve a: and urve b: and b 1) Socket box DIN EN has to be ordered separately; e.g (with LED, protective circuit and integrally extruded 3 m long UR cable) EN 5

6 Fig M 5, 6 deep (2x) ~ Fig. 7 DV5-4 ø9 M deep haracteristic p-q (recommended value) with an oil viscosity ~ 6 mm²/s M12 1 Flow resistance p [bar] Flow current Q [l/min] M in hydr. outlet ircuit able *) color V D brown V D white V D blue V D black 5 ( V D) grey *) If a precut cable with socket is used EN

7 Fig , ) Emergency manual actuation NG6 Mounting plates for line connector onnection fittings for directional valves , (to be ordered separately) Solderless tube union (at p max. to 5 bars) bottom line connector onnecting piece for ø 6 tubing : order No for ø 8 tubing : order No. 1-2 for ø tubing : order No ø Washer: order No ø M5 ube union with cutting ring to DIN 2353 (at p max. greater than 5 bars) onnecting piece for ø 8 tubing : order No. 8-3W for ø tubing : order No. 4-3W lateral line connector Washer: order No ø ) With socket box; if there is a need for DIN EN it has to ordered separately; e.g (with LED, protective circuit and integrally extruded 3 m long UR cable) 11 ø NG6 M5 ttachement of directional valve to the respective mounting plate 4 cap screws, DIN912-M washers 65-5 he parts have to be ordered separately EN 7

8 Order No EN Subject to change without notice! (3/219) Important product usage information ll products from SKF may be used only for their intended purpose as described in this brochure and in any instructions. If operating instructions are supplied with the products, they must be read and followed. Not all lubricants are suitable for use in centralized lubrication systems. SKF does offer an inspection service to test customer supplied lubricant to determine if it can be used in a centralized system. SKF lubrication systems or their components are not approved for use with gases, liquefied gases, pressurized gases in solution and fluids with a vapor pressure exceeding normal atmospheric pressure (13 mbars) by more than.5 bar at their maximum permissible temperature. Hazardous materials of any kind, especially the materials classified as hazardous by European ommunity Directive E 67/548/EE, rticle 2, ar. 2, may only be used to fill SKF centralized lubrication systems and components and delivered and/or distributed with the same after consulting with and receiving written approval from SKF. Further brochures 1-17-EN Electric lug-and-socket onnectors EN ransport of Lubricants in entralized Lubrication Systems SKF Lubrication Systems Germany GmbH Motzener Strasse 35/ erlin Germany F erlin Germany el. +49 () 722- Fax +49 () his brochure was presented by: SKF is a registered trademark of the SKF Group. SKF Group 219 he contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein.

Accessories for Minimal Quantity Metering

Accessories for Minimal Quantity Metering 1-5012-5-EN Accessories for Minimal Quantity Metering for chain lubrication and surface wetting Brush Spray head Flow volume divider Nozzles Pinpoint application of metered quantities of oil Brushes Storage

More information

Grease Pump Units For progressive and multiline systems, manually, pneumatically or hydraulically actuated

Grease Pump Units For progressive and multiline systems, manually, pneumatically or hydraulically actuated 1-0107-4-EN Grease Pump Units For progressive and multiline systems, manually, pneumatically or hydraulically actuated PF-23-2 PFP-23-2 PFH-23-2 Single- and dual-circuit piston pumps are designed for the

More information

Grease Pump Units. For progressive and multiline systems, manually, pneumatically or hydraulically actuated. Please note!

Grease Pump Units. For progressive and multiline systems, manually, pneumatically or hydraulically actuated. Please note! 1-0107-4-EN Grease Pump Units For progressive and multiline systems, manually, pneumatically or hydraulically actuated PF-23-2 PFP-23-2 PFH-23-2 Single- and dual-circuit piston pumps are designed for the

More information

Electric Plug-and-Socket Connectors

Electric Plug-and-Socket Connectors -70-EN Electric Plug-and-Socket Connectors Sockets for pressure switches, level switches, flow sensors, directional control valves and filters DIN EN 750-80/ISO 4400 DIN EN 750-804 M Electric plugs or

More information

Grease Lubrication Pump FK

Grease Lubrication Pump FK 1-3033-EN 1-0358-US for use in progressive, single-line and dual-line centralized lubrication systems pplication he FK pump unit is a multi-function piston pump whose modular structure makes it very versatile.

More information

Compact Units. For fluid grease, NLGI grades 000, 00 Group MKF 0.1 or 0.2 l/min EN

Compact Units. For fluid grease, NLGI grades 000, 00 Group MKF 0.1 or 0.2 l/min EN 1-16-EN Compact Units For fluid grease, NLGI grades, Group MKF.1 or.2 l/min MKF1-KW2-2 MKF2-KW3-2 MKF2-KW6-22 These MKFcompact units were developed to supply intermittently operated single-line centralized

More information

Block feeder SPVS Used in oil or grease lubrication systems

Block feeder SPVS Used in oil or grease lubrication systems 1-3029-EN Block feeder SPVS Used in oil or grease lubrication systems Block feeders of the SPVS series are used in grease and oil total loss lubrication systems. They are used to either increase the number

More information

SP/SMT 1 Flow Divider

SP/SMT 1 Flow Divider 1-5017-EN S/SMT 1 Flow Divider with and without inline strainer for circulating-oil or hydraulic systems Introduction The flow divider splits the supplied flow into two equal induvidual flows or into two

More information

Flow Monitors and Sensors

Flow Monitors and Sensors 1-1704-EN Flow Monitors and Sensors for intermittent and circulating centralized lubrication systems Flow monitor Flow sensor Oil-streak sensor Flow monitors/sensors have the task of monitoring the flow

More information

Block feeder SPVS Used in oil or grease lubrication systems

Block feeder SPVS Used in oil or grease lubrication systems 1-3029-EN Block feeder SPVS Used in oil or grease lubrication systems Block feeders of the SPVS series are used in grease and oil total loss lubrication systems. They are used to either increase the number

More information

Injection oilers, micro pumps for minimal quantity metering

Injection oilers, micro pumps for minimal quantity metering 1-5012-4-EN Injection oilers, micro pumps for minimal quantity metering Injection oiler, 3-port type Injection oiler, 1-port type Micro pump Delivery rates Metering pumps deliver lubricants in a measured

More information

Inexpensive solution for the lubrication of linear guides and rolling bearings

Inexpensive solution for the lubrication of linear guides and rolling bearings 1-0988-EN Compact Greaser Inexpensive solution for the lubrication of linear guides and rolling bearings Compact Greaser Up to 5 lubricant outlet ports 3 different metered volumes (15 mm 3 standard) Suitable

More information

PPU, PHU Piston Pumps for progressive grease and oil systems, pneumatically or hydraulically actuated

PPU, PHU Piston Pumps for progressive grease and oil systems, pneumatically or hydraulically actuated 1-0107-5-EN PPU, PHU Piston Pumps for progressive grease and oil systems, pneumatically or hydraulically actuated These piston pumps are available with two different delivery rate ranges. The pumps can

More information

Single-Line Centralized Lubrication Systems

Single-Line Centralized Lubrication Systems 1-15-EN Single-Line Centralized Lubrication Systems For fluid grease, NLGI grades, PFE-15-1. PF-289 MFE2-KW6F-S1 U1 U2 U3 The layout of a single-line centralized lubrication system for grease is largely

More information

Injection oilers, micro pumps

Injection oilers, micro pumps 1-5012-4-EN Injection oilers, micro pumps for minimal quantity metering Injection oiler, 3-port type Injection oiler, 1-port type Micro pump Delivery rates Metering pumps deliver lubricants in a measured

More information

For grease For application in SKF DuoFlex dual-line centralized lubrication systems

For grease For application in SKF DuoFlex dual-line centralized lubrication systems Change-over valves, differential pressure switch ccessories for Dual-line Systems For grease For application in SKF DuoFlex dual-line centralized lubrication systems Change-over valves Hydraulical or electrical

More information

PTEX extruder pumps Pneumatic extruder pump for drums of grease up to NLGI grade 2

PTEX extruder pumps Pneumatic extruder pump for drums of grease up to NLGI grade 2 1-4009-EN PTEX extruder pumps Pneumatic extruder pump for drums of grease up to NLGI grade 2 The PTEX extruder pumps are pneumatically actuated pumps designed to deliver lubricant under pressure to lubrication

More information

For high-viscosity oils and fluid grease of NLGI grades 000, 00 For use in SKF MonoFlex single-line centralized lubrication systems

For high-viscosity oils and fluid grease of NLGI grades 000, 00 For use in SKF MonoFlex single-line centralized lubrication systems Gear pump unit roduct series KFB For high-viscosity oils and fluid grease of NLGI grades 000, 00 For use in SKF MonoFlex single-line centralized lubrication systems SKF gear pump units of the KFB product

More information

Motor-driven pump unit GSJB

Motor-driven pump unit GSJB 1-4002-1-EN Motor-driven pump unit GSJB Multi-outlet pump units with oil or grease reservoir designed for centralized lubrication systems The motor-driven pump units GSJB have been especially designed

More information

Manually or pneumatically actuated Piston pumps

Manually or pneumatically actuated Piston pumps Manually or pneumatically actuated Piston pumps For oil and fluid grease For use in SKF MonoFlex single-line centralized lubrication systems These manually or pneumatically actuated piston pumps were designed

More information

Manually or pneumatically actuated piston pumps

Manually or pneumatically actuated piston pumps Manually or pneumatically actuated piston pumps Product series Pxx For oil and fluid grease For use in SKF MonoFlex single-line centralized lubrication systems Manually or pneumatically actuated piston

More information

Standard filter Disk filter Return filter. Lubrication systems can fail from the following

Standard filter Disk filter Return filter. Lubrication systems can fail from the following Filters For oil For use in SKF centralized lubrication systems Standard filter Disk filter Return filter Why filtering? Solids are diagnosed to be the main cause of damages on the components that are used

More information

UD and UC Gear pump unit

UD and UC Gear pump unit 1-19-EN for SKF CircOil or hydraulic lubrication systems General Information The UC and UD gear pump units are vertically or horizontally arranged units that are used in hydraulic or circulating-oil lubrication

More information

Standard filter Disk filter Return filter. Lubrication systems can fail from the following

Standard filter Disk filter Return filter. Lubrication systems can fail from the following Filters For oil For use in SKF centralized lubrication systems Standard filter Disk filter Return filter Why filtering? Solids are diagnosed to be the main cause of damages on the components that are used

More information

Flow limiter SP/SMB13 for line installation in circulating-oil lubrication systems.

Flow limiter SP/SMB13 for line installation in circulating-oil lubrication systems. 1-3004-EN Flow limiter SP/SMB13 for line installation in circulating-oil lubrication systems. Flow limiters are used in circulating-oil lubrication systems. The task of a flow limiter is to divide up the

More information

Flow limiter SP/SMB9 for mounting plates

Flow limiter SP/SMB9 for mounting plates 1-3002-EN Flow limiter SP/SMB for mounting plates Advantages reliable perpetual dispensation of individual volume flows - self-adjusting metering, thus identical volume flows despite different back pressures.

More information

Flow limiter SP/SMB3 Flow limiter SP/SMB6

Flow limiter SP/SMB3 Flow limiter SP/SMB6 -00-EN Flow limiter SP/SMB Flow limiter SP/SMB6 for circulating-oil lubrication systems Advantages reliable perpetual dispensation of individual volume flows - self-adjusting metering, thus identical volume

More information

Flow limiter SP/SMB10 Dual flow series

Flow limiter SP/SMB10 Dual flow series 1-00-EN Dual flow series Advantages reliable - Parallel distribution of individual flow quantities - self-regulating metering with pressure balancing valve, thus constant volumetric flows even for different

More information

SKF Grease injection system

SKF Grease injection system 1-4101-EN SKF Grease injection system Grease injecting lubrication system type GVP for moving conveyor chain pins and rollers The grease injecting lubrication system GVP has been developed to carry out

More information

" " (495) For oil For continuous monitored lubrication with minimum quantities from 0,5 to 5 mm³/min

  (495) For oil For continuous monitored lubrication with minimum quantities from 0,5 to 5 mm³/min System integration only in close cooperation with SKF Portfolio management Microdosage system MDS Product series MDx For oil For continuous monitored lubrication with minimum quantities from 0,5 to 5 mm³/min

More information

Lubrication System CLU4

Lubrication System CLU4 1-0304-EN Lubrication System CLU4 for lubrication of large 2-stroke crosshead diesel engines - resulting in your operating costs being cut due to lower oil consump tion The advantages you get from a system

More information

Metering Units and Piston Distributors with Quick Connector System

Metering Units and Piston Distributors with Quick Connector System 1-5015-US Metering Units and Piston Distributors with Quick Connector System for single-line total-loss lubrication systems (oil or fluid grease) Group 320: 0.01-0.16 ccm for oil 0.03-0.10 ccm for fluid

More information

SKF VectoLub, accessories Accessories for the minimal quantity lubrication systems VTEC and VE1B EN

SKF VectoLub, accessories Accessories for the minimal quantity lubrication systems VTEC and VE1B EN SKF VectoLub, accessories Accessories for the minimal quantity lubrication systems VTEC and VE1B 1-4402-EN Spray blocks Every spraying unit is connected to the coaxial outlet of a VTEC or VE1B unit. It

More information

Lubrication System CLU4

Lubrication System CLU4 1-0304-EN Lubrication System CLU4 for lubrication of large 2-stroke crosshead diesel engines - resulting in your operating costs being cut due to lower oil consump tion The advantages you get from a system

More information

Block metering device VPB. Block feeder for use in oil or grease lubrication systems

Block metering device VPB. Block feeder for use in oil or grease lubrication systems Block metering device VPB Block feeder for use in oil or grease lubrication systems Block metering device VPB Block metering devices or feeders of the VPBM/VPBG series are used in small circulating-oil

More information

System description for cylinder lubrication and valve seat lubrication on large 4-stroke diesel engines

System description for cylinder lubrication and valve seat lubrication on large 4-stroke diesel engines for cylinder lubrication and valve seat lubrication on large 4-stroke diesel engines Valve seat lubrication Cylinder lubrication Version 04 Page 2 for cylinder lubrication and valve seat lubrication on

More information

SKF Multilube pumping unit

SKF Multilube pumping unit SKF Multilube pumping unit for heavy vehicle lubrication systems SKF Multilube pumping unit SKF centralised lubrication systems are an effective solution for lubrication maintenance of heavy vehicles.

More information

Chain lubrication, accessories

Chain lubrication, accessories 1-106-EN Chain lubrication, accessories Nozzles, oiling brushes, reservoirs and other accessories for chain lubrication Oil projection nozzle AC-A Compact design, pinpoint accuracy, and high temperature

More information

Piston Distributors, Metering Units

Piston Distributors, Metering Units Piston Distributors, Metering Units 1-5001-US For single-line total-loss lubrication systems Group 320 0.01-0.16 ccm Group 321 0.03-0.1 ccm Group 340 0.01-0.16 ccm Group 350 0.1-0.6 ccm Group 390 0.2-1.5

More information

PS/PSL Centrifugal pumps

PS/PSL Centrifugal pumps 1 14 EN Centrifugal pumps Technical Data Delivery rate Q max = 1250 l/min Delivery head H max = 110 m Delivery temperature T = 0 C to + C Kinematic viscosity ν max = 30 mm 2 /s Quality Management DIN EN

More information

SKF VectoLub, VE1B units

SKF VectoLub, VE1B units 1-4403-EN SKF VectoLub, VE1B units External minimal quantity lubrication, Volumetric metering The emql system SKF VectoLub is a clean and economical alternative for lubricant projection in minimal quantity.

More information

PRA Centrifugal pumps

PRA Centrifugal pumps 1 6001-EN PRA Centrifugal pumps Technical data Delivery rate Q max = 130 l/min Delivery head H max = 30 m Temperature range T = 5 C to 60 C Kinematic viscosity ν max = mm 2 /s Quality Management DIN EN

More information

Product series DSA, DSB, DSC, DSD

Product series DSA, DSB, DSC, DSD Pressure Switches Product series DSA, DSB, DSC, DSD For oil, fluid grease and grease For use in SKF centralized lubrication systems, hydraulic and compressed-air systems DSA DSB DSC SKF pressure switches

More information

for SKF DuoFlex dual-line lubrication systems

for SKF DuoFlex dual-line lubrication systems SGA and SG-dosers for SKF DuoFlex dual-line lubrication systems Modular and mechanically adjustable SGA and SG-dosers are used in SKF DuoFlex applications. SGA and SG-dosers The dosing modules are hydraulically

More information

Chain lubrication, accessories Nozzles, oiling-brushes, reservoirs and other accessories for the chain lubrication EN

Chain lubrication, accessories Nozzles, oiling-brushes, reservoirs and other accessories for the chain lubrication EN Nozzles, oiling-brushes, reservoirs and other accessories for the chain lubrication 1-106-EN 16 10,5 16 10,5 ~ ~ Chain lubrication, accessories Oil projection nozzle AC-A Compact design, pinpoint accuracy,

More information

SGA and SG-dosers. for SKF DuoFlex dual-line lubrication systems

SGA and SG-dosers. for SKF DuoFlex dual-line lubrication systems SGA and SG-dosers for SKF DuoFlex dual-line lubrication systems Modular and mechanical adjustable SGA and SG-doser are used in SKF DuoFlex applications. SGA and SG-dosers The dosing modules are hydraulically

More information

For reliable control of small, large or multi-system-type lubrication systems

For reliable control of small, large or multi-system-type lubrication systems LMC 301 controller For reliable control of small, large or multi-system-type lubrication systems Models 86500, 86501 Models 86502, 86503 Designed for use with pumps that have no internal controller, the

More information

PAB Atex-certified centrifugal pumps

PAB Atex-certified centrifugal pumps 1 6036 EN PAB Atex-certified centrifugal pumps Technical data Delivery rate Q max = 305 l/min Delivery head H max = 20 m Temperature range 0 C to +60 C Quality Management DIN EN ISO 9001: 2008 Environmental

More information

SKF Maxilube pumping centre. for SKF DuoFlex, dual-line lubrication systems

SKF Maxilube pumping centre. for SKF DuoFlex, dual-line lubrication systems SKF Maxilube pumping centre for SKF DuoFlex, dual-line lubrication systems SKF Maxilube pumping centre for trouble-free production Accurate lubrication prevents damage and shutdowns caused by inadequate

More information

Injection Oilers, Micro Pumps

Injection Oilers, Micro Pumps Injection Oilers, Micro Pumps 1-5012-4-US for minimal quantity metering Magnetic piston pump Injection oiler Micropump Grease metering P Metering pumps deliver and meter out lubricants. This piston pumps

More information

Product series DigitalSuper

Product series DigitalSuper Minimal quantity lubrication (MQL) SKF LubriLean Product series DigitalSuper Extended product range with enhanced performance and state-of-the-art communication Products and applications The innovative

More information

PSR Centrifugal pumps

PSR Centrifugal pumps 1 65 EN Centrifugal pumps Technical data Delivery rate Q max = 180 l/min Delivery head H max = 255 m Temperature range T = -10 C to +80 C Kinematic viscosity ν max = mm 2 /s Quality Management DIN EN ISO

More information

JM Oil Lubrication Pump SKF MultiFlex multi-line pump units for total loss oil lubrication systems on compressors

JM Oil Lubrication Pump SKF MultiFlex multi-line pump units for total loss oil lubrication systems on compressors 1-3007-EN SKF MultiFlex multi-line pump units for total loss oil lubrication systems on compressors General Information The JM oil lubrication pump is a highpressure multiline pump that produces a maximum

More information

EN. SKF Grease Spraying System For Large Open Gears. Extend the lifetime of large gear drives

EN. SKF Grease Spraying System For Large Open Gears. Extend the lifetime of large gear drives 1-4012-EN SKF Grease Spraying System For Large Open Gears Extend the lifetime of large gear drives Gear drives Large gear drives are used to transmit movement under very heavy loads. They are open gear

More information

Linear actuator CAHM-31. Benefits. Modular Robust Reliable High speed and/or high load All metal design. Picture CAHM-3130-LS0300-D1-010

Linear actuator CAHM-31. Benefits. Modular Robust Reliable High speed and/or high load All metal design. Picture CAHM-3130-LS0300-D1-010 www.lmotion.ru lmotion-mail@ya.ru Тел.: (495)-921-34- Linear actuator CAH- Benefits odular Robust Reliable High speed and/or high load All metal design Picture CAH-3-LS3-D1-1 www.lmotion.ru lmotion-mail@ya.ru

More information

TLT. Standards. Telescopic pillar. Very small built-in dimension EN/IEC UL Powerful

TLT. Standards. Telescopic pillar. Very small built-in dimension EN/IEC UL Powerful TLT Telescopic pillar Very small built-in dimension Powerful Standards EN/IEC 661 1 UL 661 1 Technical data Unit TLT1 A1 TLT1 A2 TLT1 B1 TLT1 C1 TLT1 C2 Rated push load N 3 4 2 1 2 Rated pull load N Bending

More information

DUOFLEX lubrication pumps

DUOFLEX lubrication pumps DUOFLEX lubrication pumps 1-0012-1-US for dual-line central lubrication systems MS AS FD3 FV50 Applications DUOFLEX grease lubrication pumps are used when a large number of lube points have to be reliably

More information

Single- and Multicircuit Pumps

Single- and Multicircuit Pumps Single- and Multicircuit Pumps 1-1204-US for Circulating and Hydrostatic Lubrication as Gear, Gerotor and Vane Pump Units, Reservoir Units Gear pump unit Gerotor pump unit Multicircuit pump unit The pump

More information

PSG product series. Modular feeder. For oil and grease For use in SKF ProFlex progressive and SKF CircOil circulating centralized lubrication systems

PSG product series. Modular feeder. For oil and grease For use in SKF ProFlex progressive and SKF CircOil circulating centralized lubrication systems odular feeder PSG product series For oil and grease For use in SKF ProFlex progressive and SKF CircOil circulating centralized lubrication systems PSG1 PSG2 PSG3 Fields of application etal-forming machinery

More information

Immersion Pumps PMS and PMS-T sealless

Immersion Pumps PMS and PMS-T sealless Immersion Pumps PMS and PMS-T sealless 1-6033-EN Centrifugal pumps of metal with high resistance to wear for diverse industrial fluids Technical data Delivery rate Q max = 400 l/min Delivery head H max

More information

SKF Energy Efficient double row angular contact ball bearings. Reduced friction for reduced energy use

SKF Energy Efficient double row angular contact ball bearings. Reduced friction for reduced energy use SKF Energy Efficient double row angular contact ball bearings Reduced friction for reduced energy use SKF Energy Efficient bearings Engineered to promote sustainability As the need to conserve energy grows

More information

Flow limiter SP/SMB US

Flow limiter SP/SMB US Flow limiter SP/SMB 13... 1-3004-US for installation in the lines of circulating-oil lubrication systems General information Flow limiters are used in large circulating-oil lubrication systems. The task

More information

Piston Pumps with Reservoir

Piston Pumps with Reservoir Piston Pumps with Reservoir 1-0107-2-US for grease up to NLGI grade 2 with electric drives for progressive and multiline systems KFA1 / KFA10 KFG1-5-W2-M KFGS30-5 Because of their delivery rates and reservoir

More information

Linear actuator CAR 32. Benefits. Industrial reliable and robust actuator Wide range of components Right- and left-hand version

Linear actuator CAR 32. Benefits. Industrial reliable and robust actuator Wide range of components Right- and left-hand version Linear actuator CAR 3 Benefits Industrial reliable and robust actuator Wide range of components Right- and left-hand version CAR 3 Linear actuators Suitable control units and accessories Dimensional drawing

More information

Air-oil centralized lubrication systems

Air-oil centralized lubrication systems Air-oil centralized lubrication systems A lubrication system should always be as modern and efficient as the machine it is lubricating. Lincoln air-oil systems are ideally suited for this because they

More information

Linear actuator CAT 32B. Benefits. Compact Robust Modular Lubricated for service life High efficiency Digital encoder feedback

Linear actuator CAT 32B. Benefits. Compact Robust Modular Lubricated for service life High efficiency Digital encoder feedback Linear actuator CAT 3B Benefits Compact Robust Modular Lubricated for service life High efficiency Digital encoder feedback CAT 3B Linear actuators Suitable control units and accessories Dimensional drawing

More information

Product series LP2 and LPC. Lubrication pinions to lubricate open gear wheels and gear racks

Product series LP2 and LPC. Lubrication pinions to lubricate open gear wheels and gear racks Product series LP2 and LPC Lubrication pinions to lubricate open gear wheels and gear racks SKF lubrication pinions provide contact lubrication of pinion gears on open gear wheels and gear racks. A lubrication

More information

Spanners and sockets

Spanners and sockets Spanners and sockets Spanners and sockets Interference fits on tapered shafts Bearings mounted on tapered seatings achieve their interference fit by being driven up the tapered shaft. Care should be taken

More information

SKF Multilube pumping unit. for single-, dual-line and progressive lubrication systems

SKF Multilube pumping unit. for single-, dual-line and progressive lubrication systems SKF Multilube pumping unit for single-, dual-line and progressive lubrication systems SKF Multilube pumping unit The SKF Multilube pumping unit is an effective solution for lubricating individual machines

More information

GVP, chain lubrication

GVP, chain lubrication GVP, chain lubrication 1-4101-US Grease injecting lubrication system for moving conveyor chain pins and rollers GVP unit with 2 injectors Application The grease injecting lubrication system GVP has been

More information

Air-oil centralized lubrication systems

Air-oil centralized lubrication systems Air-oil centralized lubrication systems A lubrication system should always be as modern and efficient as the machine it is lubricating. Lincoln air-oil systems are ideally suited for this because they

More information

PS/PSL Centrifugal pumps

PS/PSL Centrifugal pumps 1 14 EN Centrifugal pumps Technical Data Delivery rate Q max = 1250 l/min Delivery head H max = 110 m Delivery temperature T = 0 C to + C Kinematic viscosity ν max = 30 mm 2 /s Quality Management DIN EN

More information

Lubrigun lubrication unit

Lubrigun lubrication unit User and maintenance instructions Lubrigun lubrication unit Models 91, 989, 8626 with air operated grease pumps 8200, 8216, 8100*, 802330* and 8313 Date of issue July 201 Form number 403404 Version 2 *

More information

LMC 301 controller. For reliable control of small, large or multi-system-type lubrication systems

LMC 301 controller. For reliable control of small, large or multi-system-type lubrication systems LMC 301 controller For reliable control of small, large or multi-system-type lubrication systems LMC 301-controlled systems can be configured to verify that lubricant is dispensed LMC 301 controller with

More information

Linear actuator CAT 33. Benefits. Small Robust Highly efficient Lubricated for service life Digital encoder feedback

Linear actuator CAT 33. Benefits. Small Robust Highly efficient Lubricated for service life Digital encoder feedback Linear actuator CAT 33 Benefits Small Robust Highly efficient Lubricated for service life Digital encoder feedback CAT 33 Linear actuators Suitable control units and accessories Dimensional drawing AC

More information

P653S Centro-Matic oil pump

P653S Centro-Matic oil pump P653S Centro-Matic oil pump Provides performance, dependability and versatility Suitable for multiple applications, the Lincoln P653S electrically driven oil pump simplifies the design of your lubrication

More information

SKF Belt Tension System. The SKF way to support transmission Easy Quick Repeatable

SKF Belt Tension System. The SKF way to support transmission Easy Quick Repeatable SKF Belt Tension System The SKF way to support transmission Easy Quick Repeatable SKF Belt Tension System An innovative solution for belt drives It is known that belts need to be changed regularly, should

More information

lubrication systems CME Electric pump for oil and soft grease volumetric

lubrication systems CME Electric pump for oil and soft grease volumetric lubrication systems CME Electric pump for oil and soft grease volumetric lubrication systems TABLE OF CONTENTS Table of contents 2 Description and technical data 3 Operation and technical data 4 Technical

More information

SKF insert bearing units UC range

SKF insert bearing units UC range SKF insert bearing units range SKF range, designed for JIS* equipment You need a robust and reliable insert bearing unit solution, one that s easy to install, simple to order and improves productivity.

More information

LMP screw pumps for delivery pressures up to 120 bar

LMP screw pumps for delivery pressures up to 120 bar 1 64 EN LM screw pumps for delivery pressures up to 12 bar Technical data Delivery rate max. = 67 l/min Delivery pressure p max. = 12 bar Temperature range C to +8 C Kinematic viscosity 1 to 2 mm 2 /s

More information

3/2 and 4/2 directional poppet valve with solenoid actuation

3/2 and 4/2 directional poppet valve with solenoid actuation Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic neumatic Electrical Mechanical (800) 426-5480 www.cmafh.com 3/2 and 4/2 directional poppet valve with solenoid actuation ype M-.SED Size 10 Component

More information

Progressive Feeders. for progressive grease and oil systems US

Progressive Feeders.  for progressive grease and oil systems US Progressive Feeders 1-0107-1- US for progressive grease and oil systems Group: VPB Metering rate [ccm]: 0.2 VPK VP 0.05-0.6 0.1-1.2 SPVS 0.16-0.32 PSG2 PSG3 0.06-0.84 0.8-3.2 Features of progressive systems

More information

SKF Flowline. for circulating oil lubrication systems

SKF Flowline. for circulating oil lubrication systems SKF Flowline for circulating oil lubrication systems SKF Flowline boosts your circulating oil system s efficiency Circulating oil systems are used in heavy industry for lubrication, cooling and particle

More information

EUGEN WOERNER GmbH & Co. KG Postfach 1661 DE Wertheim Hafenstrasse 2 DE Wertheim. Progressive distributor VPB

EUGEN WOERNER GmbH & Co. KG Postfach 1661 DE Wertheim Hafenstrasse 2 DE Wertheim. Progressive distributor VPB Progressive distributor VPB Use: In progressive mode based central lubrication systems. The main features of WOERNER progressive distributors are as follows: Accurate proportioning volumes. different proportioning

More information

Chain lubrication, accessories

Chain lubrication, accessories 1-4106-US Chain lubrication, accessories Nozzles, oiling-brushes, reservoirs and other accessories for the chain lubrication Im Folgenden finden Sie Informationen zu einem Teil unseres Leistungs- und Serviceportfolios.

More information

Fittings and Accessories. For oil and grease. For Centralized Lubrication Systems and General Use

Fittings and Accessories. For oil and grease. For Centralized Lubrication Systems and General Use Fittings and Accessories For oil and grease. For Centralized ubrication Systems and General Use Fittings and Accessories This brochure provides an overview of metallic pipe unions for luid engineering.

More information

SKF, the market leader for gas spring seals

SKF, the market leader for gas spring seals Gas spring seals SKF, the market leader for gas spring seals Gas springs are hydropneumatic devices that lift, lower and position equipment of all types. A very important component of these devices is

More information

Maximizing performance. Radial shaft seals HMS5 and HMSA10 Longer service life Improved sealing performance Excellent oil compatibility

Maximizing performance. Radial shaft seals HMS5 and HMSA10 Longer service life Improved sealing performance Excellent oil compatibility Maximizing performance Radial shaft seals HMS5 and HMSA10 Longer service life Improved sealing performance Excellent oil compatibility Radial shaft seals HMS5 and HMSA10 Main features SKF metric line of

More information

Telescopic pillars Telesmart TMA

Telescopic pillars Telesmart TMA Telesmart TMA Assembly For installing a cross member you may choose to use either the fastening plate (on the lifting pillar profile) or the swallowtail bar (front side). Further details for assembly and

More information

Electronic lubrication control unit

Electronic lubrication control unit Quickguide instructions Electronic lubrication control unit odel 807 Date of issue arch 08 Form number 07 Version Controller 807 is a universal electronic control unit compatible with dual line, single

More information

Wall mount PMV pump with suction kits and hoses

Wall mount PMV pump with suction kits and hoses Installation and maintenance guide Wall mount PMV pump with suction kits and hoses Models V30500SWM, V40600SWM, V41000SWM, series A NOTE: Oil drum shown for illustration only, not included. Date of issue

More information

PMS Centrifugal pumps

PMS Centrifugal pumps 1 6033 EN Centrifugal pumps Technical data Delivery rate Q max = 400 l/min Delivery head H max = 45 m Delivery temperature T = 0 C bis +0 C Kinematic viscosity ν max = 20 mm 2 /s Quality Management DIN

More information

4/2- and 4/3-Way Proportional Directional Control Valve Direct Operated, Model 4 WRA (Series 1X) PSI (315 bar) H/A 1768

4/2- and 4/3-Way Proportional Directional Control Valve Direct Operated, Model 4 WRA (Series 1X) PSI (315 bar) H/A 1768 /- and /-Way roptional Directional Control Valve Direct Operated, Model WR (Series X) Size 6 and... 6 SI ( bar).... GM (9 L/min) R 9 /6.98 R 9 /6.98 Replaces:.9 Characteristics: F the open loop control

More information

VECTOLUB Minimal Quantity Lubrication

VECTOLUB Minimal Quantity Lubrication VECTOLUB Minimal Quantity Lubrication 1-5012-2-US for tools and dies VECTOLUB 1 VECTOLUB 2 VECTOLUB 3 External minimal quantity lubrication (MQL) VOGEL MQL pays off, because the workpiece and environment

More information

Grease-lubricating pump FF... DSK US (05.05)

Grease-lubricating pump FF... DSK US (05.05) Grease-lubricating pump FF... DSK 2-008-00-US (05.05) electrically operated, for small and medium-sized multiple-line and progressive systems PSG-2 with cycle switch VPB with cycle switch PSG-2 with cycle

More information

Product Series OLA, MV and 161

Product Series OLA, MV and 161 SKF Oil+Air Lubrication Units and Mixing Valves Product Series OLA, MV and 161 For use in SKF Oil+Air Centralized Lubrication Systems Usage and Principle of Operation SKF Oil+Air lubrication units are

More information

Stub pump 3:1. User and maintenance instructions. Models and , series D. Date of issue December Form number

Stub pump 3:1. User and maintenance instructions. Models and , series D. Date of issue December Form number User and maintenance instructions Stub pump 3: Models 282396 and 282398, series D Date of issue December 207 Form number 404099 Section Page A6 37V Contents Safety........................... 2 Explanation

More information

Sealed SKF single row angular contact ball bearings. Robust, cost-effective and interchangeable

Sealed SKF single row angular contact ball bearings. Robust, cost-effective and interchangeable Sealed SKF single row angular contact ball bearings Robust, cost-effective and interchangeable Sealed SKF single row angular contact bearings have an attractive combination of design features such as low

More information

Servo pillar CPSM. Тел.: (495) The irst telescopic pillar with servo-power for industrial applications

Servo pillar CPSM.  Тел.: (495) The irst telescopic pillar with servo-power for industrial applications Servo pillar CPSM The irst telescopic pillar with servo-power for industrial applications High load capability High speed capability Virtually maintenance free Telescopic pillars CPSM are the ideal solution

More information

Lubrication systems for agricultural machines

Lubrication systems for agricultural machines Lubrication systems for agricultural machines Centralized lubrication The path to cost reduction From a few lubrication points to a few thousand Lincoln offers the complete range of lubrication equipment

More information