GO SILENTLY AT HIGH PRESSURE & HIGH SPEED

Transcription

1 GO SILENTLY T HIGH PRESSURE & HIGH SPEED INDUSTRIL ONTINUUM Series Helical rotor pumps for high pressure and no noise application MOILE The new generation of gear pumps for NO PULSTION & NO NOISE MRINE 1

2 ontinuum pump / pompa ontinuum chieves better efficiency, lower production cost, better life quality for the industrial world. Ottiene alti livelli di efficienza, ridotti costi di produzione ed una migliore qualità del lavoro. Reducing noise in the workplace has become a necessity for many companies. y now most companies have recognized noise as a cost weighting on the economics of their businesses. Noise pollution remains a serious problem to be solved for both stationary and mobile machinery. Hydraulic pumps, above all those for high pressure, entail unacceptable noise and/or vibration levels in many different applications. Up to now the noise problem has always been approached in the only possible way: with secondary and expensive activities such as using pulsation dampers, hoses, damping rails and rings, encapsulating the hydraulic components or the entire system and so on. SETTIM decided to start to design a new gear pumps generation capable to reduce as much as possible the acoustic emissions and the consequent vibration level. Some years ago the result was the ontinuum pump series, able to reduce down to 52 d() the normal operation noise. Today SETTIM presents the new generation of ontinuum pumps, silent as always, but much more efficient and with longer lifetime even at heavy duty, at all pressure and speed ranges. The most important economic benefits of using ontinuum pumps are: very low pump pulsations reduce dramatically also vibrations with no dispersion of energy, saving money respect to the more expensive traditional pumps such as piston pumps and internal gear pumps, high volumetric efficiency, also at very low speed, contributes to cost reduction and also enables the pump to be driven by motor at a variable velocity with consequent energy saving, cost saving by eliminating second noise reduction measures, keeping the same external dimensions of gear pump, with no necessity to redesign the system in case of replacement. OMPETITIVE NLYSIS / NLISI OMPETITIV ontinuum pump is a valid alternative to silently replace different traditional solutions of noisy high pressure pump. ontinuum pump can replace the following types of high pressure pumps: External gear pumps Internal gear pumps Fixed displacement vane pumps Fixed displacement piston pumps Please contact Settima for all information about any possible replacement. ORIGIN OF NOISE ND VIRTIONS KNOKED DOWN Y ONTINUUM PUMP / L POMP ONTINU- UM H ELIMINTO LE ORIGINI DEL RUMORE E DELLE VIRZIONI The typical sound emissions of gear pumps have two distinct origins: mechanical noise and hydraulic noise. The mechanical noise is what can be expected from any pair of gears. The hydraulic noise, however, is generated by the perturbations of fluid pressure through the pump. This noise and/or vibration comes from three basic components: cavitation, that can cause serious noise in addition to structural damage to mechanical components the peak pressure that arises from trapping of fluid between the top and the bottom of the tooth, the ripple or the flow pulsation during meshing that causes pressure pulsation. The continuous contact helical rotor ontinuum pump has solved these problems with sophisticated and efficient systems. THINK DIFFERENT: THE SILENT ND UNIQUE REVOLUTION OF ONTINUUM PUMP / UN RIVOLUZIONE SILENZIOS: L POMP ONTINUUM s for classic gear pumps, the transport flow is perpendicular to the axes, but the rotors profile, specially developed and internationally patented, does not trap any volume since the helical design of the profile plays the role of completing an overlap, making a gentle transmission of fluid resulting in a dramatic reduction of pulsation. There is just a single point of contact between the profiles during rotation, which eliminates the pockets acting on the axial thrust washer and the noise associated with this problem. The ontinuum core and its technological innovation is based on three patented breakthroughs: The rotor profile The screw step The inner force balancing. 2

3 MNUFTURING URY IN NY DE- TILS / MSSIM URTEZZ NEI DETTGLI SETTIM produces hydraulic no noise pumps since over thirty years, achieving a high level of competence and accuracy in the manufacture of high-precision hydraulic pump drives. Together with top production machineries, efficient test environments, 3D drawing capability and special materials for rotors and bushings, SETTIM constantly achieves products of high quality that is the industry standard. ONTINUUM PUMP DVNTGES / VNTGGI DELL POMP ONTINUUM Low noise also at high speed (up to 6.5 RPM). verage of d() less noisy than standard external gear pumps. Reduced noise level for the machine operator and surroundings. ost saving by eliminating second noise reduction measures. Easy to replace - compatibile with all external gear pumps. Helps meet legal noise requirements. ontinuous variable flow rate (% to 1%). Intermittent operation at high pressure & low speed. High volumetrical efficiency. PULSTIONS LEVEL GRPH / GRFIO PULSZIONI (1 bar - 4 cst rpm),4,3 ontinuum External silence gear Internal gear Relative pressure pulsation (bar),2,1 -,1 -,2 -,3,5 1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 6 6,5 7 7,5 8 8,5 9 9,5 -,4 Time (msec) NOISE LEVEL GRPH / GRFIO EMISSIONI USTIHE ( bar) GR 28 GR External Gear External Gear ontinuum ontinuum GR GR 72 External Gear External Gear ontinuum ontinuum 3 3

4 Technical characteristics Models / Modelli * - 16* Flanges Flange onnections onnessioni Installation position Posizione di installazione Shaft rotation Rotazione Shaft speed Velocità di rotazione Group 1 Group 2 (European, German, KT, SE-) Group 3 (European, SE-) Group 4 (SE-D) Gruppo 1 Gruppo 2 (Europeo, Tedesco, KT, SE-) Gruppo 3 (Europeo, SE-) Gruppo 4 (SE-D) SPP (GS) SE 3/6 PSI FL 4 HOLES M6 SU Ø4 DN2 (mentioned connections depend on model) SPP (GS) SE 3/6 PSI FL 4 HOLES M6 SU Ø4 DN2 (in base al modello) External and/or under oil Esterna e/o immersa lockwise (please contact Settima for counter clockwise) Destra (contattare Settima per sinistra) From to 6.5 rpm (for usage below 1. rpm or over 1.8 rpm please contact Settima) Da a 6.5 rpm (per utilizzi a giri inferiori a 1. rpm o superiori a 1.8 rpm contattare Settima) Flows Portate From 6 L/min up to 33 L/min (at 1.5 rpm) Da 6 L/min fino a 33 L/min (a 1.5 rpm) From GPM up to GPM (at 1,5 rpm) Operating pressure Pressione operativa**** Inlet pressure Pressione di aspirazione**** Max. ontinuous: 275 bar/3,988.5 PSI Max. ycle ON/OFF: 28 bar/4,61 PSI Max. Peak: 3 bar/4,351.1 PSI Max. ontinuo: 275 bar Max. iclo ON/OFF: 28 bar Max. Picco: 3 bar,8 3 bar 11,63-43,511 PSI Fluids Fluidi Viscosity Viscosità Environmental temperature Temperatura ambiente Oil temperature Temperature olio - Mineral oil - Synthetic oil Possible: from 5 up to 8 cst** Recommended: from 32 up to cst Starting condition: up to 3. cst** From - up to +6 Da - a +6 From - up to +8 *** Da - a +8 *** - Olio minerale - Olio sintetico onsentita: da 5 fino a 8 cst** Raccomandata: da 32 fino a cst ondizioni di avviamento: fino a 3. cst** ontamination level Livello di contaminazione Filtration Filtrazione Seals Guarnizioni coustic emissions Emissioni acustiche Flanges material Materiale delle flange Pump body / orpo Screws / Viti Up to 8 NS (18/17/14 ISO446) (for heavy duty operations over bar, over 4 working hours/day, 1 cycle/day oil ISO 46) Fino a 8 NS (18/17/14 ISO446) (per lavoro ad alto sforzo oltre bar, oltre 4 ore lavorative/giorno, 1 cicli/ giorno olio ISO 46) From 25 to 1 µm (for heavy duty operations over bar, over 4 working hours/day, 1 cycle/day oil ISO 46) Da 25 a 1 µm (per lavoro ad alto sforzo oltre bar, oltre 4 ore lavorative/giorno, 1 cicli/giorno olio ISO 46) NR, FKM (others on request) NR, FKM (altri a richiesta) From 52 up to 63 db() at 2.95 rpm Da 52 fino a 63 db() at 2.95 rpm ast iron Ghisa Extruded aluminium alloy / lluminio estruso Hardened steel / cciaio temprato * Model GR92 and GR16 will be available soon. I modelli GR92 e GR16 saranno disponibili a breve. ** Please for more information about possible and starting conditions of viscosity contact Settima. ontattare Settima per maggiori informazioni sui livelli di viscosità possibili e quelli delle condizioni di inizio lavoro. *** For higher temperature than 8, please, contact Settima. Per temperature superiori a 8, contattare Settima. **** Depending on models. / In base al modello 6

5 System requirements / Requisiti del sistema Inlet pressure The inlet vacuum must be controlled within the prescribed range in order to achieve the expected pump life and performance. The system design must meet inlet pressure requirements during all modes of operation. Peak pressure is the highest intermittent pressure allowed. The reaction time of the pressure relief valve determines the duration of operation at pressure above the rated value. The maximum time interval is 1 ms. The illustration to the right shows peak pressure in relation to rated pressure and reaction time (1 ms maximum). Rated pressure is the average, regularly occurring, operating pressure that does not compromise the product's life and performance. System pressure is the pressure differential between the outlet and inlet ports. System pressure must remain at, or below, the rated pressure during normal operation to achieve expected life. Max. continuous vacuum.8 [23.6] bar abs. Max. intermittent vacuum.6 [17.7] [in. Hg] Max. pressure 3. [88.5] Time versus pressure Peak pressure Rated pressure Hydraulic fluids Ratings and data for ontinuum pumps are valid for operation with premium fluids containing oxidation, rust, and foam inhibitors. These fluids must possess thermal and hydrolytic stability to prevent wear, erosion, and corrosion of internal components. They include: Hydraulic fluids following DIN 524, part 2 (HLP) and part 3 (HVLP) specifications PI D engine oils conforming to SE J183 M233F or G automatic transmission fluids ertain agricultural tractor fluids Use only clean fluid in the pump and hydraulic circuit. Never mix hydraulic fluids. Reaction time (1 ms max) Time hydraulic good Temperature and viscosity Temperature and viscosity requirements must be concurrently satisfied. Use petroleum / mineral-based fluids. High temperature limits apply at the inlet port to the pump. The pump should run at or below the maximum continuous temperature. The peak temperature is based on material properties. Don t exceed it. old oil, generally, doesn t affect the durability of pump components. It may affect the ability of oil to flow and transmit power. For this reason, keep the temperature at 16 [6 F] above the pour point of the hydraulic fluid. Minimum (cold start) temperature relates to the physical properties of component materials. Minimum viscosity occurs only during brief occasions of maximum ambient temperature and severe duty cycle operation. You will encounter maximum viscosity only at cold start. During this condition, limit speeds until the system warms up. Size heat exchangers to keep the fluid within these limits. Test regularly to verify that these temperatures and viscosity limits aren t exceeded. For maximum unit efficiency and bearing life, keep the fluid viscosity in the recommended viscosity range. Fluid viscosity Maximum (cold start) 3 [1394] mm 2 /s Recommended range 32-** [ ] [SUS] Minimum 5 [23] Temperature Minimum (cold start) - [-4] Maximum continuous 5* [122] [ F] Peak (intermittent) 9* [176] *For higher temperature than 5, please contact Settima. **For viscosity value out of this range, please contact Settima. Filtration lass 18/17/14 of ISO 446 (or better) filter must be used. Selecting a filter When selecting a filter, please consider: ontaminant ingression rate (determined by factors such as the number of actuators used in the system) Generation of contaminants in the system Required fluid cleanliness 7

6 Desired maintenance interval Filtration requirements of other system components Measure filter efficiency with a eta ratio (β x ). For: Suction filtration, with controlled reservoir ingression, use a β = 75 filter Return or pressure filtration, use a pressure filtration with an efficiency of β 1 = 75. βx ratio is a measure of filter efficiency defined by ISO It is the ratio of the number of particles greater than a given diameter ( x in microns) upstream of the filter to the number of these particles downstream of the filter. Fluid cleanliness level and βx ratio Fluid cleanliness level (per ISO 446) lass 18/17/14 or better β x ratio (suction filtration) β = 75 and β 1 = 2 β x ratio (pressure or return filtration) β 1 = 75 Recommended inlet screen size µm [.4-.5 in] The filtration requirements for each system are unique. Evaluate filtration system capacity by monitoring and testing prototypes. Reservoir The reservoir provides clean fluid, dissipates heat, removes entrained air and makes up for changes in fluid volume due to fluid expansion-contraction and flow imbalances associated with differential cylinders. correctly sized reservoir accommodates maximum volume changes during all system operating modes. It promotes de-aeration of the fluid as it passes through, and accommodates a fluid dwell-time between 6 and 18 seconds, allowing entrained air to escape. Hydraulic oil contains 1% of dissolved air by volume in normal conditions and the system should be design in order to avoid any over-areation of the hydraulic fluid, to limit any air release at the inlet port. Minimum reservoir capacity depends on the volume required to cool and hold the oil from all retracted cylinders, allowing for expansion due to temperature changes. fluid volume of 1 to 3 times the pump output flow (per minute) is satisfactory. The minimum reservoir capacity is 125% of the fluid volume. The suction line shall be installed above the bottom of the reservoir to take advantage of gravity separation and prevent large foreign particles from entering the line. over the line with a micron screen. The pump should be below the lowest expected fluid level. Put the return-line below the lowest expected fluid level to allow discharge into the reservoir for maximum dwell and efficient deaeration. baffle (or baffles) between the return and suction lines promotes deaeration and reduces fluid surges. Pump drive Shaft options for ontinuum pumps include tapered, tang, splined, or parallel shafts. They are suitable for a wide range of direct and indirect drive applications for radial and thrust loads. Plug-in drives, acceptable only with a splined shaft, can impose severe radial loads when the mating spline is rigidly supported. Increasing spline clearance does not alleviate this condition. Use plug-in drives if the concentricity between the mating spline and pilot diameter is within.1 mm [.4 in]. Lubricate the drive by flooding it with oil. 3-piece coupling minimizes radial or thrust shaft loads. In order to avoid spline shaft damages it is recommended to use carburized and hardened steel couplings with 6-62 HR surface hardness. llowable radial shaft loads are a function of the load position, load orientation, and operating pressure of the hydraulic pump. ll external shaft loads have an effect on bearing life, and may affect pump performance. Pump life Pump life is a function of speed, system pressure, and other system parameters (such as fluid quality and cleanliness). ll ontinuum pumps use hydrodynamic journal bearings that have an oil film maintained between the gear/shaft and bearing surfaces at all times. If the oil film is sufficiently sustained through proper system maintenance and operating within recommended limits, long life can be expected. 1 life expectancy number is generally associated with rolling element bearings. It does not exist for hydrodynamic bearings. High pressure, resulting from high loads, impacts pump life. When submitting an application for review, provide machine duty cycle data that includes percentages of time at various loads and speeds. We strongly recommend a prototype testing program to verify operating parameters and their impact on life expectancy before finalizing any system design. 8

7 ontinuum Servo drive pumps Servo drive systems: easy, no noise, fast and energy saving. Hydraulic press servo drives have been on the market since many years already. In sia most of the market of plastic injection molding machines is using variable servo drive motors and fixed displacement pumps, like external gear, vane or internal gear pumps. The usage of this type of systems enables energy savings up to 65% when compared to conventional drive systems (fixed speed motor and variable displacement hydraulic pumps). Today, more than 1. servo drive systems are used in the manufacturing process of hydraulic presses. This kind of systems, while reaching real energy savings, also enables huge simplifications of the hydraulic circuits: no more proportional valves or complicated hydraulic pressure feedback are needed to control the press actions and cycles. Servo pump systems use motor speed between nearly and 3. RPM, to enable very fast movement of the molds and a high cycle dynamics. The noise of hydraulic pumps is the issue, ontinuum is the solution. The real innovation in the pump market is the ontinuum pump. ontinuum is on the market since early 24 and brought Settima to the very top amongst manufacturers of silent components establishing a new high standard that all competitors struggle to reach but without success. This technology cuts the noise at the root: the profile of the rotors has been engineered to reach no-noise and no-pulsations. The ontinuum servo pump is used in the market of presses since 28, enabling the press designers to reach wide speed dynamics in heavy duty pressing cycles without noise. Settima package is suitable for press modernization and revamping. It s possible to remove all of the old and noisy hydraulic components and to replace them with our system, making the old machines more flexible and quieter than ever. ontinuum Servo Drive pump The ontinuum servo drive pump possible applications: PLSTIS Plastic injection molding machines, Plastic injection machines retrofitting, low molding machines, Rubber presses. PRESSES Hydraulic presses, Press modernization and revamping. ENVIRONMENTL INDUSTRY alers, Waste compactors. Variable servo drive motors + Gear pump The ontinuum servo drive pump advantages & economical benefit High pressure and flow control through gear pumps Special profile of the rotors Enables energy savings up to 65% Simplification of the hydraulic circuits More compact hydraulic units, up to 8% less space needed No more need for proportional valves Significant reduction of all operating cost No-noise and No-pulsations No noise reduction measures needed to fulfill the Occupational Guidelines 9

8 ontinuum Servo drive pumps The ontinuum servo drive pump can be equipped with (optional): ccumulator: the bypass valve never reacts with the same dynamic and speed of the ontinuum servo drive pump. The accumulator catches the risky pressure peaks. line filter. Non return valve: to make the management of pressure holding phases stronger. Inline pressure and temperature sensor: to enable quick and easy installation. Servo drive and motor: can be supplied by Settima (many brands are available). This enables a better management of the electronic components maintenance and service programs of the machines of our customer. M The below graphs show two real examples of PIMM working cycles with ontinuum servo drive pump. Ex. 1 [bar] Shaft speed [RPM] Speed Time Ex. 2 [bar] Time Shaft speed [RPM] Speed Time 1

9 Product description / Descrizione prodotto N DESRIPTION/DESRIZIONE MTERIL / MTERILE 1 O-ring seal / O-ring NR 2 O-ring seal / O-ring NR 3 O-ring seal / O-ring NR 4 Driving ontinuum rotor / Rotore guida ontinuum Hardened steel / cciaio temprato 5 Motor flange / Flangia motore ast iron / Ghisa 6 Ring for bush / nello porta boccola luminium / lluminio 7 Driven ontinuum rotor / Rotore guidato ontinuum Hardened steel / cciaio temprato 8 ody / orpo Extruded aluminum alloy / lluminio estruso 9 over flange / Flangia ast iron / Ghisa 1 Seal / nello di tenuta NR 11 Seeger / Seeger Steel / cciaio 12 Screws / Viti di fissaggio Steel / cciaio 13 Piston / Pistone Steel / cciaio 14 Piston / Pistone Steel / cciaio entring Keys / Spine di centraggio Steel / cciaio 17 ushings / occole Steel / cciaio Standard type and options STNDRD MTERIL OPTIONL MTERIL ody / orpo lluminium / lluminio ast iron / Ghisa Seal kit NR FKM ushings / occole lluminium / lluminio ronze / ronzo 11

10 Ordering code / odice ordine Single pump / Pompa singola Type Tipo lass lasse Displacement ilindrata Flange & shaft Flangia & albero Ports Porte Shaft seal Guarnizione albero Rotation Rotazione GR28 2V F13-F1P2-F1KG54-F1LGL54- FSE-F1KGL54 G-U GR F24-F2K7G-FSE-FSET9 G-Q-U GR F24-F2K7G-FSE- FSET11-FSET9 G-Q-U GR F39-FSE-FSET13 G-O-U GR FSE-FSET O-OE GR72 2V FSED-FSEDT23 ME * Please ontact Settima for SX counter clockwise optional rotation. ontattare Settima per rotazione SX opzionale. Standard NR (none) Optional FKM V Standard DX (none) Optional SX* DIRETION OF ROTTION / SENSO DI ROTZIONE ontinuum pumps are available with right rotation as standard configuration and left rotation as optional configuration. Right hand rotation means that, when standing in front of the pump, with driving shaft towards to the observer, the pump is rotating clockwise (DX). The other way around with left hand rotation, counter clockwise (SX). Le pompe ontinuum sono fornite con la configurazione standard di rotazione destra. Opzionale la rotazione sinistra. on rotazione destra (DX) si intende che, guardando la pompa frontalmente, con l albero conduttore sporgente verso il punto di osservazione, la rotazione sarà in senso orario, con il lato mandata sulla destra e il lato aspirazione sulla sinistra della pompa. Viceversa per quanto riguarda la rotazione sinistra (SX). ontinuum pumps, despite the type of configuration, can rotate to the opposite side if the pressure is not higher than 1% of maximum continuous pressure (check the Technical haracteristics table). Le pompe ontinuum, qualunque configurazione di rotazione abbiano, possono ruotare in senso inverso a pressioni non superiore al 1% della massima pressione continua (verificare nella tabella delle caratteristiche tecniche). DX: lockwise rotation / Rotazione destra SX: ounter clockwise rotation / Rotazione sinistra Inlet / spirazione Outlet / Mandata Outlet / Mandata Inlet / spirazione 12

11 Variant codes for ordering integral relief valves* The tables below detail the various codes for ordering integral relief valves. R: ode E F G K I L M N O Pump speed for RV setting 5 min -1 (rpm) 1 min -1 (rpm) 125 min -1 (rpm) min -1 (rpm) 2 min -1 (rpm) 225 min -1 (rpm) 25 min -1 (rpm) 28 min -1 (rpm) 3 min -1 (rpm) 325 min -1 (rpm) ode setting bar [261 psi] 3 3 bar [435 psi] 4 4 bar [58 psi] 5 5 bar [725 psi] 6 6 bar [87 psi] 7 7 bar [1 psi] 8 8 bar [116 psi] 9 9 bar [135 psi] 1 1 bar [145 psi] bar [174 psi] bar [23 psi] bar [232 psi] bar [2611 psi] bar [346 psi] bar [3626 psi] Integral relief valve schematic * Please, contact Settima for this option. 13

12 GR28 - Dimensional drawings / Disegni dimensionali GR28 SHFT ND FLNGE TYPES ND DIMENSIONS / TIPI DI LERO E FLNGI E DIMENSIONI Group 1 pumps / Pompe gruppo 1 Type lass Flange & Shaft available types Ports Weight F1 3 GR28 2V F1P 2 F1K G54 F1K GL54 F1L G54 F1L GL54 FSE G-U 2 Kg 7 2,756" 64 2,52" 11,5,453" 35 1,378" 5,5,217",591" 56 2,25" 52 2,47" 8,4,331" 24,5,965" 26,2 1,31" 89 3,54" 73 2,874" O 12,472" M1 x 1 1:8 11,9,469" 73 2,874" 72 2,835" Key \ Ling uetta UNI-666 3x5 [,118"x,197"] N 4 O 7,5,295" O 3 -,2 -,5 1,181" -,8 -,2 GR28 - TYPE / TIPO F1 3 Type Tipo Flow Portata Dimensions Dimensioni Dimensions Dimensioni ontinuous Pressione continua Intermittent Pressione intermittente (*) Peak pressure Picco pressione (*) Noise level Livello rumore Max torque oppia max L/min GPM mm inc mm inc bar PSI bar PSI bar PSI 4 4,2 6 22, ,976 44,5 1, ,4 9,2 34,826 16,5 4,193 47,25 1, d Nm 8 8, , ,5 4,39 49,75 1, ,2 14,7 55, ,5 4,587 52,25 2, ,9 18,6 7,49 123,4 4,858 55,7 2, Max torque / oppia max: 1 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF 14

13 29 1,142" 7 2,756" 4,7" 56 2,25" 64 2,52",591" 52 2,47" 9,354" 5,5,217" 24,5,965" 26,2 1,31" 89 3,54" 73 2,874" O 8,3" M7 1:8 11,9,469" 73 2,874" 72 2,835" Key \ Ling uetta 2,38x5,16 [,94"x,23"] N 4 O 7,5,295" O 25,4 -,2 -,5 1" -,8 -,2 GR28 - TYPE / TIPO F1P 2 Type Tipo Flow Portata Dimensions Dimensioni Dimensions Dimensioni ontinuous Pressione continua Intermittent Pressione intermittente (*) Peak pressure Picco pressione (*) Noise level Livello rumore Max torque oppia max L/min GPM mm inc mm inc bar PSI bar PSI bar PSI 4 4,2 6 22, ,976 44,5 1, ,4 9,2 34,826 16,5 4,193 47,25 1, d Nm 8 8, , ,5 4,39 49,75 1, ,2 14,7 55, ,5 4,587 52,25 2, ,9 18,6 7,49 123,4 4,858 55,7 2, Max torque / oppia max: 5 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF 7,276" 64 2,52" 5,35,211" 14,551" 4 1,575" 2,787" 73 2,874" -,3 32 -,5 1,26" -,12 -,2 O O 24,945" -,2 -,8 1,5,413",531" O 13,5 11,9,469" N 2 O 8,5,335" 4 1,575" 4,75,187" 5 -,2 -,5,197" -,8 -,2 GR28 - TYPE / TIPO F1K G54 Type Tipo Flow Portata Dimensions Dimensioni Dimensions Dimensioni ontinuous Pressione continua Intermittent Pressione intermittente (*) Peak pressure Picco pressione (*) Noise level Livello rumore Max torque oppia max L/min GPM mm inc mm inc bar PSI bar PSI bar PSI 4 4,2 6 22, ,976 44,5 1, ,4 9,2 34,826 16,5 4,193 47,25 1, d Nm 8 8, , ,5 4,39 49,75 1, ,2 14,7 55, ,5 4,587 52,25 2, ,9 18,6 7,49 123,4 4,858 55,7 2, Max torque / oppia max: 4 Nm

14 12,472" 64 2,52" 7,276" 14,551" 4 1,575" 2,787" 1,5,413" 73 2,874" -,3 32 -,5 1,26" -,12 -,2 O O 24,945" -,2 -,8,531" O 13,5 6,3,248" 11,9,469" N 2 O 8,5,335" 5 -,2 -,5,197" -,8 -,2 4 1,575" GR28 - TYPE / TIPO F1K GL54 Type Tipo Flow Portata Dimensions Dimensioni Dimensions Dimensioni ontinuous Pressione continua Intermittent Pressione intermittente (*) Peak pressure Picco pressione (*) Noise level Livello rumore Max torque oppia max L/min GPM mm inc mm inc bar PSI bar PSI bar PSI 4 4,2 6 22, ,976 44,5 1, ,4 9,2 34,826 16,5 4,193 47,25 1, d Nm 8 8, , ,5 4,39 49,75 1, ,2 14,7 55, ,5 4,587 52,25 2, ,9 18,6 7,49 123,4 4,858 55,7 2, Max torque / oppia max: 5 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF 7,276" 64 2,52" 5,35,211" 14,551" 2,79" 4 1,575" 2,787" 73 2,874" 1,5,413" 13,512" IN Gas 3/8" ` -,3 32 -,5 1,26" -,12 -,2 O O 24,945" -,2 -,8,531" O 13,5 4,75,187" 11,9,469" N 2 O 8,5,335" 9,65,38" 5 -,2 -,5,197" -,8 -,2 OUT O 9,354" 4 1,575" GR28 - TYPE / TIPO F1L G54 Type Tipo Flow Portata Dimensions Dimensioni ontinuous Pressione continua Intermittent Pressione intermittente (*) Peak pressure Picco pressione (*) Noise level Livello rumore Max torque oppia max L/min GPM mm inc bar PSI bar PSI bar PSI 4 4,2 6 22, , ,4 9,2 34,826 16,5 4, d Nm 8 8, , ,5 4, ,2 14,7 55, ,5 4, ,9 18,6 7,49 123,4 4, Max torque / oppia max: 4 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF 16

15 64 2,52" 12,472" 7,276" 14,551" 2,79" 4 1,575" 2,787" 1,5,413" 73 2,874" 13,512" IN Gas 3/8" ` -,3 32 -,5 1,26" -,12 -,2 O O 24,945" -,2 -,8,531" O 13,5 6,3,248" 11,9,469" N 2 O 8,5,335" 5 -,2 -,5,197" -,8 -,2 9,65,38" OUT O 9,354" 4 1,575" GR28 - TYPE / TIPO F1L GL54 Type Tipo Flow Portata Dimensions Dimensioni ontinuous Pressione continua Intermittent Pressione intermittente (*) Peak pressure Picco pressione (*) Noise level Livello rumore Max torque oppia max L/min GPM mm inc bar PSI bar PSI bar PSI 4 4,2 6 22, , ,4 9,2 34,826 16,5 4, d Nm 8 8, , ,5 4, ,2 14,7 55, ,5 4, ,9 18,6 7,49 123,4 4, Max torque / oppia max: 5 Nm 27 1,63" 64 2,52" 6,4,252" O 66 2,593" O 12,7,5" -,3 -,12 7,8,37" 73 2,874" 19,748" 11,9,469" O 1,5,413" Key \ Ling uetta 3,2x3,2x [,126"x,126"x.59"] 82,55 3,25" 13 4,42" N 2 GR28 - TYPE / TIPO FSE Type Tipo Flow Portata Dimensions Dimensioni Dimensions Dimensioni ontinuous Pressione continua Intermittent Pressione intermittente (*) Peak pressure Picco pressione (*) Noise level Livello rumore Max torque oppia max L/min GPM mm inc mm inc bar PSI bar PSI bar PSI 4 4,2 6 22, ,213 5,5 1, ,4 9,2 34, ,5 4,429 53,25 2, d Nm 8 8, , ,5 4,626 55,75 2, ,2 14,7 55, ,5 4,823 58,25 2, ,9 18,6 7,49 129,4 5,94 61,7 2, Max torque / oppia max: 6 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF 17

16 INLET ND OUTLET PORTS / PORTE DI SPIRZIONE E MNDT (Suction / ) Type G / Tipo G Type U / Tipo U SE O-Ring port 1 Thread NSI 1.1 3/4-16 UNF-2 O 2,6,811" Gas 1/2" SFETY VLVE / VLVOL DI MSSIM Not available on models / Non diponibile per i modelli F1L G54 and F1L GL54 64,5 2,539" 17,669" + 13mm [,512"] 2,5,98" 18

17 GR33 - Dimensional drawings / Disegni dimensionali GR33 SHFT ND FLNGE TYPES ND DIMENSIONS / TIPI DI LERO E FLNGI E DIMENSIONI Group 2 pumps / Pompe gruppo 2 Type lass Flange & Shaft available types Ports Weight F2 4 GR33 2 F2K7 G FSE FSE T9 Q-G-U 5 Kg 86 3,386" 4 1,575" 5,197",591" 91 3,583" 71,5 2,8" O,579" 9,354" 32,5 1,28" 12 4,16" M12 x 1.5 1:8 13,75,541" 121 4,764" 96 3,78" Key \ Ling etta UNI-666 4x6,5 [,7"x,256] N 4 O 1,394" O 36,5 -,3 -,6 1,437" -,12 -,24 GR33 - TYPE / TIPO F2 4 Type Tipo Flow Portata Dimensions Dimensioni Dimensions Dimensioni ontinuous Pressione continua Intermittent Pressione intermittente (*) Peak pressure Picco pressione (*) Noise level Livello rumore Max torque oppia max L/min GPM mm inc mm inc bar PSI bar PSI bar PSI 1 1,1 14,5 54,888 14,5 4,114 46,75 1, d Nm 13 12,6 18,1 68,516 19,4 4,37 49,2 1, ,2 21,8 82, ,4 4,54 51,7 2, ,2 26,1 98,799 12,2 4,732 54,6 2, Max torque / oppia max: 21 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF 19

18 86 3,386" 7,2,283" 1,394" 6 2,362" 12 4,16" 6 2,362" 14,1,555" O 37 1,457" O 18,79" 13,75,541" 5,7,224" N 2 O 1,5,413" O 52 -,3 -,8 2,47" -,12 -,31,6,614" GR33 - TYPE / TIPO F2 K7 G Type Tipo Flow Portata Dimensions Dimensioni Dimensions Dimensioni ontinuous Pressione continua Intermittent Pressione intermittente (*) Peak pressure Picco pressione (*) Noise level Livello rumore Max torque oppia max L/min GPM mm inc mm inc bar PSI bar PSI bar PSI 1 1,1 14,5 54,888 14,5 4,114 46,75 1, d Nm 13 12,6 18,1 68,516 19,4 4,37 49,2 1, ,2 21,8 82, ,4 4,54 51,7 2, ,2 26,1 98,799 12,2 4,732 54,6 2, Max torque / oppia max: 11 Nm 86 3,386" 32 1,26" 6,4,252" 8,5,335" 14 5,512" 16,4 4,189" O 99 3,898" -,3 -,12 O,88,625" 24,945" 12 4,16" 16,83,662" 13,75,541" 11,433" Key \ Ling etta 3,95x3,95x18 [,6"x,6"x,7"] O 82,55 -,5 3,25" -,2 GR33 - TYPE / TIPO FSE Type Tipo Flow Portata Dimensions Dimensioni Dimensions Dimensioni ontinuous Pressione continua Intermittent Pressione intermittente (*) Peak pressure Picco pressione (*) Noise level Livello rumore Max torque oppia max L/min GPM mm inc mm inc bar PSI bar PSI bar PSI 1 1,1 14,5 54,888 14,5 4,114 46,75 1, d Nm 13 12,6 18,1 68,516 19,4 4,37 49,2 1, ,2 21,8 82, ,4 4,54 51,7 2, ,2 26,1 98,799 12,2 4,732 54,6 2, Max torque / oppia max: 14 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF 2

19 86 3,386" 32 1,26" 6,4,252" 8,5,335" 14 5,512" 16,4 4,189" O 99 3,898" 21,827" 12 4,16" O -,2,9 -,1,626" -,8 -,39 NSI-92.1/76 16/32-DP 9T 13,75,541" 11,433" O 82,55 -,5 3,25" -,2 GR33 - TYPE / TIPO FSE T9 Type Tipo Flow Portata Dimensions Dimensioni Dimensions Dimensioni ontinuous Pressione continua Intermittent Pressione intermittente (*) Peak pressure Picco pressione (*) Noise level Livello rumore Max torque oppia max L/min GPM mm inc mm inc bar PSI bar PSI bar PSI 1 1,1 14,5 54,888 14,5 4,114 46,75 1, d Nm 13 12,6 18,1 68,516 19,4 4,37 49,2 1, ,2 21,8 82, ,4 4,54 51,7 2, OPTION \ OPZIONI 18 18,2 26,1 98,799 12,2 4,732 54,6 2, INLET ND OUTLET TORT \ PORTE DI SPIRZIONE E MNDT Max torque / oppia max: 19 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF INLET OUTLET PORTS / PORTE DI SPIRZIONE E MNDT (Suction / ) Type Q \ Tipo Q Type G / Tipo G Type Q / Tipo Q Type G \ Tipo G OPTION \ OPZIONI OPTION \ OPZIONI INLET ND OUTLET TORT \ PORTE DI SPIRZIONE INLET E MNDT OUTLET TORT \ PORTE DI SPIRZIONE E MNDT Type Q \ Tipo Q Type Q \ Tipo Q Type G \ Tipo G Type G \ Tipo G O 4 1,575" OPTION \ OPZIONI INLET ND OUTLET TORT \ PORTE DI SPIRZIONE Gas 3/4" E MNDT O 4 1,575" N 4 M6x13 O 4 1,575" N 4 M6x13 N 4 M6x13 O 19,748" Type Q \ Tipo Q UNF INLET OUTLET PORTS / PORTE DI SPIRZIONE E MNDT UNF - Type U / Tipo U Type G \ Tipo G Gas 3/4" 16,7,657" 2,5,98" 16,7,657" 2,5,98" O 23,9,941" O 29,2 1," O 35,5 1,398" 7/8-14 UNF-2N 4 M6x13 1" 1/16-12 UN-2 1" 5/16-12 UN-2 Gas 3/4" SE O-Ring NSI 1.1 port 1 19,748" 3,3,13" O 19,748" Type U \ U Tipo \ Tipo U U SE O-Ring NSI 1.1 SE O-Ring NSI 1.1 SE O-Ring Port 1 12 SE O-Ring NSI 1.1 SE O-Ring NSI 1.1 Port SE 12 O-Ring NSI 1.1 NSI 1.1 SE O-Ring NSI 1.1 Port 1 Port 16 Port 16 O 23,9,941" Port 1 O 29,2 23,9,941" 1," O 35,5 1,398" Port 12 O 29,2 1," O 35,5 1,398" 7/8-14 UNF-2 1" 7/8-14 1/16-12 UNF-2 UN-2 1" 1/16-121" UN-2 5/16-12 UN-2 1" 5/16-12 UN-2 O 4 1,575" 16,7,657" 2,5,98" 19,748" 3,3,13" Type U \ Tipo U O 19,748" Gas 3/4" Type U \ Tipo U 19 19,748",748" 3,3,13" 3,3,13" SE O-Ring NSI 1.1 port 16 SE O-Ring NSI 1.1 Port 1 O 23,9,941" SE O-Ring NSI 1.1 Port 12 O 29,2 1," SE O-Ring NSI 1.1 Port 16 O 35,5 1,398" 7/8-14 UNF-2 1" 1/16-12 UN-2 1" 5/16-12 UN-2 SE O-Ring NSI 1.1 port 12 19,748" 19,748" 3,3,13" 3,3,13" O 19,748" Suction/ U ports possible configuration Port 16 Possibili combinazioni porte di aspirazione/ mandata di tipo U SE O-Ring NSI 1.1 Pump Suction port port 1 cc SE O-Ring port 12 SE O-Ring port 1 13 cc SE O-Ring port 12 SE O-Ring port 1 cc SE O-Ring port 12 SE O-Ring port 1 18 cc SE O-Ring port 16 SE O-Ring port 12 19,748" 3,3,13" 19,748" 3,3,13" 21

20 GR38 - Dimensional drawings / Disegni dimensionali GR38 SHFT ND FLNGE TYPES ND DIMENSIONS / TIPI DI LERO E FLNGI E DIMENSIONI Group 2 pumps / Pompe gruppo 2 Type lass Flange & Shaft available types Ports Weight F2 4 GR38 2 F2K7 G FSE FSE T9 FSE T11 Q-G-U 6 Kg 86 3,386" 4 1,575" 5,197",591" 91 3,583" 71,5 2,8" O,579" 9,354" 32,5 1,28" 12 4,16" M12 x 1.5 1:8,9,626" 121 4,764" 96 3,78" Key \ Ling etta UNI-666 4x6,5 [,7"x,256] N 4 O 1,394" O 36,5 -,3 -,6 1,437" -,12 -,24 GR38 - TYPE / TIPO F2 4 Type Tipo Flow Portata Dimensions Dimensioni Dimensions Dimensioni ontinuous Pressione continua Intermittent Pressione intermittente (*) Peak pressure Picco pressione (*) Noise level Livello rumore Max torque oppia max L/min GPM mm inc mm inc bar PSI bar PSI bar PSI 16,9 22,8 86, ,252 48, ,9 25,8 97, , d Nm ,8 19, ,488 51, ,1 31,8 12, , ,2 36,2 137,32 121,5 4,783 55, ,3 4,7 4, ,961 57, Max torque / oppia max: 21 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF 22

21 86 3,386" 7,2,283" 1,394" 6 2,362" 12 4,16" O 37 1,457" O 18,79" 3,5,9,626" 14,1,555" 5,7,224" N 2 O 1,5,413" 6 2,362" O 52 -,3 -,8 2,47" -,12 -,31,6,614" GR38 - TYPE / TIPO F2K7 G Type Tipo Flow Portata Dimensions Dimensioni Dimensions Dimensioni ontinuous Pressione continua Intermittent Pressione intermittente (*) Peak pressure Picco pressione (*) Noise level Livello rumore Max torque oppia max L/min GPM mm inc mm inc bar PSI bar PSI bar PSI 16,9 22,8 86, ,252 48, ,9 25,8 97, , d Nm ,8 19, ,488 51, ,1 31,8 12, , ,2 36,2 137,32 121,5 4,783 55, ,3 4,7 4, ,961 57, Max torque / oppia max: 11 Nm 86 3,386" 32 1,26" 6,4,252" 8,5,335" 14 5,512" 16,4 4,189" O 99 3,898" -,3 -,12 O,88,625" 24,945" 12 4,16" 11,433" 16,83,662",9,626" Key \ Ling etta 3,95x3,95x18 [,6"x,6"x,7"] O 82,55 -,5 3,25" -,2 GR38 - TYPE / TIPO FSE Type Tipo Flow Portata Dimensions Dimensioni Dimensions Dimensioni ontinuous Pressione continua Intermittent Pressione intermittente (*) Peak pressure Picco pressione (*) Noise level Livello rumore Max torque oppia max L/min GPM mm inc mm inc bar PSI bar PSI bar PSI 16,9 22,8 86, ,252 48, ,9 25,8 97, , d Nm ,8 19, ,488 51, ,1 31,8 12, , ,2 36,2 137,32 121,5 4,783 55, ,3 4,7 4, ,961 57, Max torque / oppia max: 14 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF 23

22 86 3,386" 32 1,26" 6,4,252" 8,5,335" 14 5,512" 16,4 4,189" O 99 3,898" 21,827" 12 4,16" O -,2,9 -,1,626" -,8 -,39 NSI-92.1/76 16/32-DP 9T,9,626" 11,433" O 82,55 -,5 3,25" -,2 GR38 - TYPE / TIPO FSE T9 Type Tipo Flow Portata Dimensions Dimensioni Dimensions Dimensioni ontinuous Pressione continua Intermittent Pressione intermittente (*) Peak pressure Picco pressione (*) Noise level Livello rumore Max torque oppia max L/min GPM mm inc mm inc bar PSI bar PSI bar PSI 16,9 22,8 86, ,252 48, ,9 25,8 97, , d Nm ,8 19, ,488 51, ,1 31,8 12, , ,2 36,2 137,32 121,5 4,783 55, ,3 4,7 4, ,961 57, Max torque / oppia max: 19 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF 86 3,386" 32 1,26" 6,4,252" 8,5,335" 14 5,512" 16,4 4,189" O 99 3,898" 22,866" 12 4,16" O 19 -,2,748" -,79 11,433" NSI-92.1/76 16/32-DP 11T,9,626" O 82,55 -,5 3,25" -,2 GR38 - TYPE / TIPO FSE T11 Type Tipo Flow Portata Dimensions Dimensioni Dimensions Dimensioni ontinuous Pressione continua Intermittent Pressione intermittente (*) Peak pressure Picco pressione (*) Noise level Livello rumore Max torque oppia max L/min GPM mm inc mm inc bar PSI bar PSI bar PSI 16,9 22,8 86, ,252 48, ,9 25,8 97, , d Nm ,8 19, ,488 51, ,1 31,8 12, , ,2 36,2 137,32 121,5 4,783 55, ,3 4,7 4, ,961 57, Max torque / oppia max: 21 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF 24

23 INLET OUTLET PORTS / PORTE DI SPIRZIONE E MNDT (Suction / ) Type G / Tipo G Type Q / Tipo Q OPTION \ OPZIONI INLET ND OUTLET TORT \ PORTE DI SPIRZIONE E MNDT Gas 3/4" O 4 1,575" N 4 M6x13 O 19,748" Type Q \ Tipo Q Type G \ Tipo G UNF INLET OUTLET PORTS / PORTE DI SPIRZIONE E MNDT UNF - Type U / Tipo U Type U \ Tipo U SE O-Ring NSI 1.1 Port 16 Gas 3/4" 16,7,657" 2,5,98" O 23,9,941" 7/8-14 O UNF-2 4 1,575" 16,7,657" 2,5,98" N 4 M6x13 O 23,9,941" O 29,2 1," O 35,5 1,398" 7/8-14 UNF-2 1" 1/16-12 UN-2 1" 5/16-12 UN-2 O 19,748" 19,748" 3,3,13" 19,748" 3,3,13" SE O-Ring NSI 1.1 Port 1 SE O-Ring NSI 1.1 Port 12 Type U \ Tipo U SE O-Ring NSI 1.1 port 1 SE O-Ring NSI 1.1 Port 16 O 23,9,941" O 29,2 1," O 35,5 1,398" 7/8-14 UNF-2 1" 1/16-12 UN-2 1" 5/16-12 UN-2 SE O-Ring NSI 1.1 port 12 19,748" 3,3,13" 19,748" 3,3,13" SE O-Ring NSI 1.1 port 16 Suction/ UNF ports possible configuration Possibili combinazioni porte di aspirazione/mandata di tipo UNF Pump Suction port port 16 cc SE O-Ring port 12 SE O-Ring port 1 18 cc SE O-Ring port 16 SE O-Ring port 12 2 cc SE O-Ring port 16 SE O-Ring port cc SE O-Ring port 16 SE O-Ring port cc SE O-Ring port 16 SE O-Ring port cc SE O-Ring port 16 SE O-Ring port 12 25

24 GR47 - Dimensional drawings / Disegni dimensionali GR47 SHFT ND FLNGE TYPES ND DIMENSIONS / TIPI DI LERO E FLNGI E DIMENSIONI Group 3 pumps / Pompe gruppo 3 Type lass Flange & Shaft available types Ports Weight F3 9 GR47 2 FSE FSE T13 G-O-U 1 Kg 47 1,85" 125 4,921" 114 4,488" 5,197" 2,787" 98,5 3,878" O 19,748" 12,14,478" 43 1,693" 148 5,827" M14 x 1.5 1:8 19,5,768" 8 6,22" 128 5,39" Key \ Ling etta UNI-666 4x7,5 [,7"x,295] N 4 O 11,433" O 5,8 -,3 -,6 2" -,12 -,24 GR47 - TYPE / TIPO F3 9 Type Tipo Flow Portata Dimensions Dimensioni Dimensions Dimensioni ontinuous Pressione continua Intermittent Pressione intermittente (*) Peak pressure Picco pressione (*) Noise level Livello rumore Max torque oppia max L/min GPM mm inc mm inc bar PSI bar PSI bar PSI ,3 2, ,5 5,492 61,5 2, ,2 46,3 175, ,5 5,65 63,5 2, d Nm 36 36,3 52,3 197, ,5 5,87 65,5 2, ,5 58,3 22,69 1,5 5,965 67,5 2, , ,52 6 6,142 69,75 2, ,3 72,4 274, ,339 72,25 2, Max torque / oppia max: 32 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF 26

25 114 4,488" 41,2 1,622" 6,236" 2,787" 174 6,85" 146 5,748" O 12 4,724" O 22,225 -,3,875" -,12 33,3 1,311",591" 148 5,827" 24,96,983" 19,5,768" Key \ Ling etta 6,35x6,35x25,4 [,25"x,25"x1"] O 11,6 -,5 4" -,2 GR47 - TYPE / TIPO FSE Type Tipo Flow Portata Dimensions Dimensioni Dimensions Dimensioni ontinuous Pressione continua Intermittent Pressione intermittente (*) Peak pressure Picco pressione (*) Noise level Livello rumore Max torque oppia max L/min GPM mm inc mm inc bar PSI bar PSI bar PSI ,3 2, ,5 5,492 61,5 2, ,2 46,3 175, ,5 5,65 63,5 2, d Nm 36 36,3 52,3 197, ,5 5,87 65,5 2, ,5 58,3 22,69 1,5 5,965 67,5 2, , ,52 6 6,142 69,75 2, ,3 72,4 274, ,339 72,25 2, Max torque / oppia max: 45 Nm - Max torque / oppia max: 6 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF 114 4,488" 41,2 1,622" 6,236" 2,787" 174 6,85" 146 5,748" O 12 4,724" -,2 22,23 -,1 O,875" -,8 -,39 33,3 1,311" 148 5,827" NSI-92.1/76 16/32-DP 13T,591" 19,5,768" O 11,6 -,5 4" -,2 GR47 - TYPE / TIPO FSE T13 Type Tipo Flow Portata Dimensions Dimensioni Dimensions Dimensioni ontinuous Pressione continua Intermittent Pressione intermittente (*) Peak pressure Picco pressione (*) Noise level Livello rumore Max torque oppia max L/min GPM mm inc mm inc bar PSI bar PSI bar PSI ,3 2, ,5 5,492 61,5 2, ,2 46,3 175, ,5 5,65 63,5 2, d Nm 36 36,3 52,3 197, ,5 5,87 65,5 2, ,5 58,3 22,69 1,5 5,965 67,5 2, , ,52 6 6,142 69,75 2, ,3 72,4 274, ,339 72,25 2, Max torque / oppia max: 45 Nm - Max torque / oppia max: 6 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF 27

26 GR47 INLET OUTLET PORTS / PORTE DI SPIRZIONE E MNDT Suction port Type "U" port Type "U" 3,3,13" O 43,5 1,713" 1" 5/8-12 UN-2 3,3,13" O 35,5 1,398" 1" 5/16-12 UN-2 19,748" 19,748" Suction port INLET TORT \ PORTE port DI SPIRZIONE Type "G" OPTION \ OPZIONI Type "G" Type G \ Tipo G Type O \ Tipo O type U \ Tip o U SE O-Ring NSI 1.1 O 43,5 1,713" Gas 1" 58,7 2,311" Gas 3/4" O 33 1,299" 19,748" 3,3,13" 1" 5/8-12 UN-2 Gas 1" 3,2 1,189" N 4 M1x2 Suction port port OUTLET TORT \ PORTE DI MNDT ,7 2,311" Type G \ Tipo G Gas 3/4" Type "O" Type O \ Tipo O O 33 1,299" 47,6 1,874" 19,748" 3,3,13" Type "O" Type O \ Tipo O type U \ Tip o U SE O-Ring NSI 1.1 O 43,5 1,713" 1" 5/8-12 UN-2 O 19,748" 19,748" 3,3,13" type U \ Tip o U SE O-Ring NSI 1.1 O 35,5 1,398" 1" 5/16-12 UN-2 3,2 1,189" N 4 M1x2 22,2,874" N 4 M1x OUTLET TORT \ PORTE DI MNDT type U \ Tip o U SE O-Ring NSI 1.1 O 35,5 1,398" 3,3,13" 1" 5/16-12 UN-2 47,6 1,874" O 19,748" 19,748" 22,2,874" N 4 M1x18 28

27 GR55 - Dimensional drawings / Disegni dimensionali GR55 SHFT ND FLNGE TYPES ND DIMENSIONS / TIPI DI LERO E FLNGI E DIMENSIONI Group 3 pumps / Pompe gruppo 3 Type lass Flange & Shaft available types Ports Weight GR55 2 FSE FSE T O-OE Kg 122 4,83" 46 1,811" 6,236" 2,787" 174 6,85" 146 5,748" O 12 4,724" O 25,4 -,3 1" -,12 38,1 1,5",591" 164 6,457" 28, 1,18" 23,96" Key \ Ling etta 6,35x6,35x31,8 [,25"x,25"x1,25"] O 11,6 -,5 4" -,2 Out In GR55 - TYPE / TIPO FSE Type Tipo Flow Portata Dimensions Dimensioni Dimensions Dimensioni Dimensions Dimensioni ontinuous Pressione continua Intermittent Pressione intermittente (*) Peak pressure Picco pressione (*) Noise level Livello rumore Max torque oppia max L/ min GPM mm inc mm inc O OE mm inc mm inc bar PSI bar PSI bar PSI d Nm 5 5,5 72,7 275, ,181 7,5 2,776 7,5 2,776 7,5 2, ,5 91,4 345, , , ,953 78,5 3, ,1 49, , , ,11 82,5 3, ,2 13,9 495, ,283 84,5 3,327 84,5 3, , Max torque / oppia max: 7 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF 29

28 122 4,83" 46 1,811" 6,236" 2,787" 174 6,85" 146 5,748" O 12 4,724" -,5 25,4 -,1 O 1" -,2 -,39 33,3 1,311" 164 6,457",591" 23,96" O 11,6 -,5 4" -,2 Out In NSI-92.1/76 16/32-DP T GR55 - TYPE / TIPO FSE T Type Tipo Flow Portata Dimensions Dimensioni Dimensions Dimensioni Dimensions Dimensioni ontinuous Pressione continua Intermittent Pressione intermittente (*) Peak pressure Picco pressione (*) Noise level Livello rumore Max torque oppia max L/ min GPM mm inc mm inc O OE mm inc mm inc bar PSI bar PSI bar PSI d Nm 5 5,5 72,7 275, ,181 7,5 2,776 7,5 2,776 7,5 2, ,5 91,4 345, , , ,953 78,5 3, ,1 49, , , ,11 82,5 3, ,2 13,9 495, ,283 84,5 3,327 84,5 3, , OPTION \ OPZIONI Max torque / oppia max: 55 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF GR55 INLET OUTLET PORTS / PORTE DI SPIRZIONE E MNDT - Type / Tipo O - OE 1 INLET Type port O OE Size port SE-3 1 ¼ SE-3 1 ¼ only for 5cc SE-3 1 ½ 1 3,2 3,2 35,7 1 58,7 58,7 69,85 ØD1 33, 33, 38, F1 M1x2 M1x18 M12x18 1 ØD1 N 4 F1 OUTLET Type port O OE Size port SE-3 ¾ SE ,2 26,2 2 47,6 52,4 ØD2 19, 25, F2 M1X18 M1X18 3

29 GR72 - Dimensional drawings / Disegni dimensionali GR72 SHFT ND FLNGE TYPES ND DIMENSIONS / TIPI DI LERO E FLNGI E DIMENSIONI Group 4 pumps / Pompe gruppo 4 Type lass Flange & Shaft available types Ports Weight GR72 2V FSED FSED T23 ME 3 Kg 17 6,693" -,12 O 38 -,3 1,496" 62 2,441" 6,3,248" 54 2,126" 2,787" 267 1,512" 228,6 9" O 2 7,874" 19 7,48" 42,3 1,665" 29,75 1,171" 22,866" Key \ Ling etta 9,5x9,5x45 [,37"x,37"x1,77"] O 2,4 -,5 6" -,2 Out In GR72 - TYPE / TIPO FSE Type Tipo Flow Portata Dimensions Dimensioni Dimensions Dimensioni Dimensions Dimensioni ontinuous Pressione continua Intermittent Pressione intermittente (*) Peak pressure Picco pressione (*) Noise level Livello rumore Max torque oppia max L/min GPM mm inc mm inc mm inc bar PSI bar PSI bar PSI d Nm 94 94, , , ,5 4, ,5 4, , , , , , , , , , , ,22 268,5 1, ,25 5,44,25 5, ,79 278,5 1, ,25 5,6 5,25 6, , , , ,5 5,87 16,5 6, Max torque / oppia max: 1 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF 31

30 17 6,693" 36 1,417" 62,1 2,445" 6,3,248" 2,787" 267 1,512" 228,6 9" O 2 7,874" 19 7,48" 22,866" O -,1 38,1 -, 1,5" -,39 -,59 29,75 1,171" O 2,4 -,5 6" -,2 Out In NSI-92.1/76 16/32-DP 23T GR72 - TYPE / TIPO FSE T23 Type Tipo Flow Portata Dimensions Dimensioni Dimensions Dimensioni Dimensions Dimensioni ontinuous Pressione continua Intermittent Pressione intermittente (*) Peak pressure Picco pressione (*) Noise level Livello rumore Max torque oppia max L/min GPM mm inc mm inc mm inc bar PSI bar PSI bar PSI d Nm 94 94, , , ,5 4, ,5 4, , , , , , , , , , , ,22 268,5 1, ,25 5,44,25 5, ,79 278,5 1, ,25 5,6 5,25 6, , , , ,5 5,87 16,5 6, Max torque / oppia max: 12 Nm * Intermittent: cycle 2 sec. ON & 3 sec. OFF - Peak: cycle 1 sec. ON & 3 sec OFF. Intermittente: ciclo 2 sec. ON & 3 sec. OFF - Picco: ciclo 1 sec. ON & 3 sec OFF OPTION OPTION \ OPZIONI \ OPZIONI GR72 INLET OUTLET PORTS / PORTE DI SPIRZIONE E MNDT - Type ME / Tipo ME SE 3 2 ½ SUTION PORT 2" Inlet 1/2 SE-3 SUTION PORT 2" 1/2 SE-3 PRESSURE PORT 1" 1/2 SE-6 SE 6 1 ½ Outlet PRESSURE PORT 1" 1/2 SE-6 5,8 2" 5,8 2" 36,5 1,437" 36,5 1,437" N 4 M12x22 N 4 M12x22 O 38 1,496" O 38 1,496" N 4 M16x28 N 4 M16x28 O 62 2,441" O 62 2,441" 79,4 3,126" 79,4 3,126" 89 3,54" 89 3,54" 32

31 Flow 46 cst GR / 1L-GL54 / 1L-G GR28 1P-2 Flow [L/min] cc (14bar) 1cc (18bar) 8cc (22bar) 6cc (24bar) Flow [L/min] cc (14bar) 1cc (18bar) 8cc (22bar) 6cc (24bar) 4cc (24bar) 4cc (24bar) Sha Speed [rpm] Sha Speed [rpm] GR28 1K-G54 / 1K-GL GR28 SE- Flow [L/min] cc (14bar) 1cc (18bar) 8cc (22bar) 6cc (24bar) Flow [L/min] cc (14bar) 1cc (18bar) 8cc (22bar) 6cc (24bar) 4cc (24bar) 4cc (24bar) Sha Speed [rpm] Sha Speed [rpm] 7 GR33 1 GR Flow [L/min] cc (26bar) cc (241bar) 13cc (265bar) 1cc (275bar) Flow [L/min] cc (197bar) 25cc (28bar) 22cc (222bar) 2cc (23bar) 18cc (247bar) 16cc (265bar) Sha Speed [rpm] Sha Speed [rpm] GR38 SE-T9 GR Flow [L/min] cc (23bar) 18cc (247bar) 16cc (265bar) Flow [L/min] cc (22bar) 45cc (213bar) 4cc (225bar) 36cc (239bar) 32cc (252bar) 28cc (27bar) Sha Speed [rpm] Sha Speed [rpm] 33

32 Flow 46 cst 3 GR55 35 GR Flow [L/min] 2 1 9cc (178bar 75cc (229bar 63cc (249bar 5cc (275bar Flow [L/min] 2 1 2cc (22bar) 175cc (213bar) cc (225bar) 125cc (239bar) 11cc (252bar) 94cc (27bar) Sha Speed [rpm] Sha Speed [rpm] 34

33 Power-torque 46 cst GR28 4 Power [kw] GR GR GR GR GR GR

34 Power-torque 46 cst GR33 GR GR38 16 GR GR38 2 GR GR GR

35 Power-torque 46 cst GR GR GR GR GR GR GR GR

36 Power-torque 46 cst 25 GR GR GR GR GR GR GR GR

37 Tandem & multiple pumps / Pompe doppie e multiple ontinuum pumps are suitable for multiple setups, whereby the drive shaft of the first pump is extended to a second and even a third ontinuum pump. Each pump is connected to another by means of coupling. Each pump has its own suction port. asically the technical specifications of single pumps apply also to multiple setups**. The maximum speed is determined by the highest pump speed rate in use. In case of multiple setup configurations, it is recommended to use the largest displacement for the first pump. The front pump may be equipped with different types of flange and shaft. Ordering code / odice ordine Multiple setups / Pompe multiple Type Tipo lass lasse Displacement ilindrata Flange & shaft Flangia & albero Ports Porte Type 2nd stage Tipo 2 stadio Displacement 2nd stage ilindrata 2 stadio Ports Porte Shaft seal Guarnizione albero Rotation Rotazione DG28 2V F13 G-U GR28 G-Q- DG F24 U-M GR G-U GR G-Q-U GR DG38 DG F24 F39 FSET G-Q- U-M G-O- U GR G-U GR G-Q-U GR GR G-U GR G-Q-U GR Standard NR (none) Standard DX (none) DG FSET O-OE GR O-U GR G-U GR G-Q-U GR Optional FKM V Optional SX* GR O-U GR O-OE DG72 2V FSEDT23 ME GR O-U GR O-OE GR ME * Please contact Settima for SX counter clockwise optional rotation. ontattare Settima per rotazione SX opzionale. ** The minimum operating pressure recommended for the second stage is 3 bar. In case of lower pressure, please, contact Settima. Minima pressione di funzionamento consigliata per il secondo stadio 3 bar, al di sotto, contattare Settima. 39

38 GR28 - Group 1 tandem pumps* 11,9,469" GR28-1 GR28 + GR GR mm inc mm inc mm inc mm inc mm inc 191 7,52 196,5 7,74 21,5 7,97 26,5 8,13 213,4 8,4 44,5 1,75 44,5 1,75 44,5 1,75 44,5 1,75 44,5 1,75 9 3,54 92,75 3,65 95,25 3,75 97,75 3,85 11,2 3,98 196,5 7, , , 212 8,35 218,9 8,62 47,25 1,86 47,25 1,86 47,25 1,86 47,25 1,86 47,25 1,86 92,75 3,65 95,5 3, ,86 1,5 3,96 13,95 4,9 21,5 7, , 212 8, ,54 223,9 8,81 49,75 1,96 49,75 1,96 49,75 1,96 49,75 1,96 49,75 1,96 95,25 3, ,86 1,5 3, ,6 16,45 4,19 26,5 8, , , ,74 228,9 9,1 52,25 2,6 52,25 2,6 52,25 2,6 52,25 2,6 52,25 2,6 97,75 3,85 1,5 3, ,6,5 4, 18,95 4,29 213,4 8,4 218,9 8,62 223,9 8,81 228,9 9,1 235,8 9,28 55,7 2,19 55,7 2,19 55,7 2,19 55,7 2,19 55,7 2,19 nge and shaft \ Flange e alberi disponibili 1,378" 5,217" 11,2 3,98 13,95 4,9 16,45 4,19 18,95 4,29 112,4 4,43 vailable flanges and shafts for GR28 Flange e alberi disponibili per GR28 Type \ Tipo F1-3 Max torque \ oppia Type massima flange 1 Nm13 / Flangia tipo 1 3,591" N 4 O 7,5,295" 56 2,25" 52 2,47" 11,9,469" vailable flange and shaft \ Flange e Type \ Tipo F1-3 Type shaft 13 / lbero tipo Max 1 torque 3 \ oppia massima 1 Nm Max torque / oppia max 1 Nm 35 1,378" 5,5,217",591" N 4 O 7,5,295" 56 2, ,47 8,4,331" 24,5,965" 26,2 1,31" 11,5,453" 8,4,331" 24,5,965" 73 2,874" O -,2 3 -,5 1,181" -,8 -,2 72 2,835" O 12,472" M1 x 1 1:8 73 2,874" Key \ Ling uetta UNI-666 3x5 [,118"x,197"] * Standard multiple pumps are delivered with both stages in fluid communication. When placing an order, it is necessary to specify if the two stages will handle different kinds of fluids or fluids coming from more than one reservoir. / Le pompe multiple sono consegnate con entrambi gli stadi in comunicazione di fluido. In fase di ordine, occorre specificare se la pompa multipla utilizza oli differenti sui diversi stadi o provenienti da più di un serbatoio. 4 GR28 + GR28 2 St [77.646''] [77.862''] 21.5 [78.59''] 26.5 [78.256''] [78.528'']

39 GR33 - Groups 2 tandem pumps* 11,9,469" D GR28-2 GR33 + GR mm inc mm inc mm inc mm inc mm inc 217,5 8, , , ,17 239,9 9,44 GR ,75 2,12 53,75 2,12 53,75 2,12 53,75 2,12 53,75 2,12 17,25 4, ,33 112,5 4,43 1 4,53 118,45 4,67 D 13,75,54 13,75,54 13,75,54 13,75,54 13,75,54 222,4 8,76 227,9 8,97 232,9 9,17 237,9 9,37 244,8 9,64 56,2 2,21 56,2 2,21 56,2 2,21 56,2 2,21 56,2 2,21 19,7 4,32 112,45 4,43 114,95 4,53 117,45 4,62 12,9 4,76 D 13,75,54 13,75,54 13,75,54 13,75,54 13,75,54 227,4 8,95 232,9 9,17 237,9 9,37 242,9 9,56 249,8 9,83 58,7 2,31 58,7 2,31 58,7 2,31 58,7 2,31 58,7 2,31 112,2 4,42 114,95 4,53 117,45 4,63 119,95 4,72 123,4 4,86 D 13,75,54 13,75,54 13,75,54 13,75,54 13,75,54 233,2 9,18 238,7 9,4 243,7 9,59 248,7 9,79 255,6 1,6 61,6 2,43 61,6 2,43 61,6 2,43 61,6 2,43 61,6 2,43 1,1 4,53 117,85 4,64 12,35 4,74 122,85 4,84 126,3 4,97 D 13,75,54 13,75,54 13,75,54 13,75,54 13,75,54 * Standard multiple pumps are delivered with both stages in fluid communication. When placing an order, it is necessary to specify if the two stages will handle different kinds of fluids or fluids coming from more than one reservoir. / Le pompe multiple sono consegnate con entrambi gli stadi in comunicazione di fluido. In fase di ordine, occorre specificare se la pompa multipla utilizza oli differenti sui diversi stadi o provenienti da più di un serbatoio. 41

40 GR33 - Groups 2 tandem pumps* D E D GR33-1 D E GR33-2 GR33 + GR mm inc mm inc mm inc mm inc 218 8,58 222,9 8,78 227,9 8,97 233,7 9,2 53,75 2,11 53,75 2,12 53,75 2,12 53,75 2, ,5 4,19 18,95 4,29 111,45 4,39 114,35 4,5 D 13,75,54 13,75,54 13,75,54 13,75,54 E 13,75,54 13,75,54 13,75,54 13,75,54 222,9 8,78 227,8 8,97 232,8 9,17 238,6 9,39 56,2 2,21 56,2 2,21 56,2 2,21 56,2 2, ,95 4,29 111,4 4,39 113,9 4,48 116,8 4,6 D 13,75,54 13,75,54 13,75,54 13,75,54 E 13,75,54 13,75,54 13,75,54 13,75,54 227,9 8,97 232,8 9,17 237,8 9,36 243,6 9,59 58,7 2,31 58,7 2,31 58,7 2,31 58,7 2,31 111,45 4,39 113,9 4,48 116,4 4,58 119,3 4,7 D 13,75,54 13,75,54 13,75,54 13,75,54 E 13,75,54 13,75,54 13,75,54 13,75,54 233,7 9,2 238,6 9,39 243,6 9,59 249,4 9,82 61,6 2,43 61,6 2,43 61,6 2,43 61,6 2, ,35 4,5 116,8 4,6 119,3 4,7 122,2 4,81 D 13,75,54 13,75,54 13,75,54 13,75,54 vailable flanges and shafts for GR33 Flange ed alberi disponibili per GR33 Type flange 24 / Flangia tipo 24 E 13,75,54 13,75,54 13,75,54 13,75,54 4 1,575" 5,197" O,579" 9,354" vailable flange and shaft vailable \ Flange flange e alberi and disponibili shaft \ Flange e alberi disponibili Type \ Tipo F2-4 Max torque \ oppia massima 21 Nm Type \ Tipo F2-4 Max torque \ oppia massima 21 Nm Type shaft 5,197" 24 / lbero tipo 24 Max torque / oppia max 21 Nm O,579" 4 1,575" 9,354" 32,5 1,28" 91 3,583" 71,5 2,8" M12 x 1.5 Key \ Ling etta UNI-666 4x6,5 [,7"x,256] 1:8 M12 x 1.5 Key \ Ling etta UNI-666 4x6,5 [,7"x,256] 1:8 O 36,5 -,3 -,6 1,437" -,12 -, ,764" 96 3,78" O 36,5 -,3 -,6 1,437" -,12 -,24 N 4 O 1,394" * Standard multiple pumps are delivered with both stages in fluid communication. When placing an order, it is necessary to specify if the two stages will handle different kinds of fluids or fluids coming from more than one reservoir. / Le pompe multiple sono consegnate con entrambi gli stadi in comunicazione di fluido. In fase di ordine, occorre specificare se la pompa multipla utilizza oli differenti sui diversi stadi o provenienti da più di un serbatoio. 42

41 GR38 - Groups 2 tandem pumps* 11,9,469" D GR GR28-2 GR38 + GR28 vailable flange and shaft \ Flange e alberi disponibili Type \ Tipo F2-4 Max torque \ oppia massima 21 Nm mm inc mm inc mm inc mm inc mm inc 224 8, ,5 9,35 234,5 9, ,5 9, ,4 9,71 55,5 16,594 55,5 16,594 55,5 16,594 55,5 16,594 55,5 16, , ,75 83,77 117,25 83, ,75 83, ,2 84,12 D,9,626,9,626,9,626,9,626,9, , ,5 9,4 237,5 9,35 242,5 9, ,4 9, , , , , , ,5 85, ,25 85,27 118,75 85, ,25 85, ,7 85,62 D,9,626,9,626,9,626,9,626,9, ,55 235,5 9,272 24,5 9, ,5 9, ,4 9,937 58,5 16,713 58,5 16,713 58,5 16,713 58,5 16,713 58,5 16, , ,75 86,77 12,25 86, ,75 86, ,2 87,12 D,9,626,9,626,9,626,9-,6,626,9,626 O 1,437" -,12 -, , ,5 9,39 243,5 9, ,5 9, ,4 1, , , , , , ,5 88, ,3 88,27 121,75 88, ,25 88, ,7 88,62 D,9,626,9,626,9,626,9,626,9, ,5 9, , , , ,9 1,232 62,25 16,86 62,25 16,86 62,25 16,86 62,25 16,86 62,25 16,86 118,75 4,68 121,5 4, ,88 126,5 4,98 129,95 5,12 D,9,626,9,626,9,626,9,626,9, , ,5 9, ,5 9, ,5 1, ,4 1,49 64,5 16,949 64,5 16,949 64,5 16,949 64,5 16,949 64,5 16, , ,75 92,77 126,25 92, ,75 92, ,2 93,12 D,9,626,9,626,9,626,9,626,9,626 36,5 -,3 43

42 GR38 - Groups 2 tandem pumps* GR38-1 D E GR33-2 GR38 + GR vailable flange mm and shaft inc \ mm Flange ince alberi mm disponibili inc mm inc 224,5 8,84 229,4 9,3 234,4 9,23 24,2 9,46 55,5 2,19 55,5 2,19 55,5 2,19 55,5 2,19 Type \ Tipo 16F2-4 Max torque \ oppia massima 21 Nm ,25 4,38 113,7 4, ,2 3,583" 4,57 119,1 4,69 D 4,9 1,575",63,9,63 71,5,9 2,8",63,9,63 5,197" E 13,75,54 13,75,54 13,75,54 13,75,54 227,5 8,96 232,4 9, 237,4 9,35 243,2 9,57 O,579" 57 2, , , ,24 112,8 4,44 1,2 4,54 117,7 4,63 12,6 4,75 D,9,63,9,63,9,63,9,63 E 13,75,54 13,75,54 13,75,54 13,75,54 M12 x 1.5 9,354" 121 4,764" 96 3,78" 32,5 1,28" 23,5 1:8 9,7 235,4 9,27 24,4 9,46 246,2 9,69 -,3 36,5 -,6 1,437" -,12 -,24 58,5 2,3 58,5 2,3 58,5 O 2,3 58,5 2,3 114,25 4,5 116,7 4,59 119,2 4,69 122,1 4,81 Key \ Ling etta UNI-666 4x6,5 [,7"x,256] D,9,63,9,63,9,63,9,63 E 13,75,54 13,75,54 13,75,54 13,75,54 233,5 9,19 238,4 N 4 9,39 243,4 9,58 249,2 9,81 6 2,36 6 O 1,394" 2,36 6 2,36 6 2,36 1,75 4,56 118,2 4,65 12,7 4,75 123,6 4,87 D,9,63,9,63,9,63,9,63 E 13,75,54 13,75,54 13,75,54 13,75, ,37 242,9 9,56 247,9 9,76 253,7 9,99 62,25 2,45 62,25 2,45 62,25 2,45 62,25 2, ,65 12,45 4,74 122,95 4,84 125,85 4,96 D,9,63,9,63,9,63,9,63 E 13,75,54 13,75,54 13,75,54 13,75,54 242,5 9,55 247,4 9,74 252,4 9,94 258,2 1,17 64,5 2,54 64,5 2,54 64,5 2,54 64,5 2,54 12,25 4,74 122,7 4,83 125,2 4,93 128,1 5,4 D,9,63,9,63,9,63,9,63 E 13,75,54 13,75,54 13,75,54 13,75,54 44

43 D E D GR38 - Groups 2 tandem pumps* GR38-1 GR38 + GR GR mm inc mm inc mm inc mm inc mm inc mm inc 228 8, , , ,33 241,5 9, ,69 55,5 2,19 55,5 2,19 55,5 2,19 55,5 2,19 55,5 2,19 55,5 2, ,45 114,5 4, ,57 117,5 4,63 119,75 4, ,8 D,9,63,9,63,9,63,9,63,9,63,9,63 E,9,63,9,63,9,63,9,63,9,63,9, , , , ,45 244,5 9, ,8 57 2, , , , , ,24 114,5 4, ,57 117,5 4, ,69 121,25 4,77 123,5 4,86 D,9,63,9,63,9,63,9,63,9,63,9,63 E,9,63,9,63,9,63,9,63,9,63,9, , , , ,57 247,5 9, ,92 58,5 2,3 58,5 2,3 58,5 2,3 58,5 2,3 58,5 2,3 58,5 2, ,49 117,5 4, ,69 12,5 4,74 122,75 4, ,92 D,9,63,9,63,9,63,9,63,9,63,9,63 E,9,63,9,63,9,63,9,63,9,63,9, , , , ,69 25,5 9, ,4 6 2,36 6 2,36 6 2,36 6 2,36 6 2,36 6 2,36 117,5 4, ,69 12,5 4, ,8 124,25 4,89 126,5 4,98 D,9,63,9,63,9,63,9,63,9,63,9,63 E,9,63,9,63,9,63,9,63,9,63,9,63 241,5 9,51 244,5 9,63 247,5 9,74 25,5 9, ,4 259,5 1,22 62,25 2,45 62,25 2,45 62,25 2,45 62,25 2,45 62,25 2,45 62,25 2,45 119,75 4,72 121,25 4,77 122,75 4,83 145,25 5,72 126,5 4,98 128,75 5,7 D,9,63,9,63,9,63,9,63,9,63,9,63 E,9,63,9,63,9,63,9,63,9,63,9, , , , ,4 259,5 1, ,39 64,5 2,54 64,5 2,54 64,5 2,54 64,5 2,54 64,5 2,54 64,5 2, ,8 123,5 4, ,92 126,5 4,98 128,75 5, ,16 D,9,63,9,63,9,63,9,63,9,63,9,63 E,9,63,9,63,9,63,9,63,9,63,9,63 vailable flanges and shafts for GR38 Flange ed alberi disponibili per GR38 ilable flange and shaft \ Flange e alberi disponibili vailable flange and shaft \ Flange e alb o F2-4 a massima 21 Nm Type 4flange 1,575" 24 / 5,197" Flangia tipo 24 O,579" 9,354" 32,5 1,28" 91 3,583" 71,5 2,8" Type \ Tipo F2-4 Type shaft 24 / lbero tipo 24 Max torque / oppia max 21 Nm Max torque \ oppia massima 21 Nm O,579" 4 1,575" 5,197" 9,354" 32,5 1,28" 91 71,5 M12 x 1.5 1: ,764" 96 3,78" O 36,5 -,3 -,6 1,437" -,12 -,24 M12 x 1.5 1: ,764" 96 3,78" Key \ Ling etta UNI-666 4x6,5 [,7"x,256] Key \ Ling etta UNI-666 4x6,5 [,7"x,256] N 4 O 1,394" N 4 O 1,394" * Standard multiple pumps are delivered with both stages in fluid communication. When placing an order, it is necessary to specify if the two stages will handle different kinds of fluids or fluids coming from more than one reservoir. / Le pompe multiple sono consegnate con entrambi gli stadi in comunicazione di fluido. In fase di ordine, occorre specificare se la pompa multipla utilizza oli differenti sui diversi stadi o provenienti da più di un serbatoio. 45

44 GR47 - Group 3 tandem pumps 19,5,768" GR47-1 D GR47 + GR vailable flange and shaft \ Flange e alberi disponibili GR28-2 Type \ Tipo F Max torque \ oppia massima 32 Nm mm inc mm inc mm inc mm inc mm inc ,54 298,5 11,75 33,5 11,95 38,5 12, 3,4 12,42 67,5 2,66 67,5 2,66 67,5 2,66 67,5 2,66 67,5 2, ,65 171,75 6,76 174,25 6,86 176,75 6,96 18,25 7,1 D 11,9,47 11,9,47 11,9,47 11,9,47 11,9, ,69 32,5 11,91 37,5 12,11 312,5 12,3 319,4 12,57 69,5 2,74 69,5 2,74 69,5 2,74 69,5 2,74 69,5 2, ,73 173,75 6,84 176,25 6,94 178,75 7,4 182,2 7,17 D 11,9,47 11,9,47 11,9,47 11,9,47 11,9, ,85 36,5 12,7 311,5 12,26 316,5 12,46 323,4 12,73 71,5 2,81 71,5 2,81 71,5 2,81 71,5 2,81 71,5 2,81 136, 5,35 138,75 5,46 141,25 5,56 143,75 5,66 147,2 5,8 41,2 1,622" 2,787" D Type \ Tipo FSE-T13 11,9,47 11,9,47 11,9,47 11,9,47 11,9, ,748" Max torque \ oppia massima 6 Nm 6,236" 35 12,1 31,5 12,22 3,5 12,42 32,5 12,62 327,4 12,89 73,5 2,89 73,5 2,89 73,5 2,89 73,5 2,89 73,5 2,89 33, ,89 177,75 7, 18,25 7,1 182,75 7,19 186,2 7,33 -,2 22,23 -,1 D 11,9,47 11,9,47 11,9,47 11,9,47 11,9,47 O,875" -,8 -,39 1,311" 39,5 12, , , ,8 331,9 13,7 75,75 2,98 75,75 2,98 75,75 2,98 75,75 2,98 75,75 2,98 NSI-92.1/76 16/32-DP 13T 2,787" 177,25 6, ,9 182,5 7, ,28 188,45 7,42 D 11,9,47 11,9,47 11,9,47 11,9,47-,2 11,9,47 314,5 12, , , ,99 336,9 13,26 78,25 3,8 78,25 3,8 78,25 3,8 78,25 3,8 78,25 3,8 179,75 7,8 182,5 7, ,28 187,5 7,38 19,95 7,52 D 11,9,47 11,9,47 11,9,47 11,9,47 11,9, ,85" O 5,8 -,3 -,6 2" -,12 -,24 O 12 4,724" O 11,6 -,5 4",591" 46

45 GR47-1 GR47 + GR GR mm inc mm inc mm inc mm inc 36,5 12,7 311,4 12,26 316,4 12,46 322,2 12,69 67,5 2,66 67,5 2,66 67,5 2,66 67,5 2,66 181,25 7,14 183,7 7,23 186,2 7,33 189,1 7,44 D 13,75,54 13,75,54 13,75,54 13,75,54 31,5 12,22 3,4 12,42 32,4 12,61 326,2 12,84 69,5 2,74 69,5 2,74 69,5 2,74 69,5 2,74 183,25 7,21 185,7 7,31 188,2 7,41 191,1 7,52 D 13,75,54 13,75,54 13,75,54 13,75,54 314,5 12,38 319,4 12,57 324,4 12,77 33,2 13, 71,5 2,81 71,5 2,81 71,5 2,81 71,5 2,81 185,25 7,29 187,7 7,39 19,2 7,49 193,1 7,6 D 13,75,54 13,75,54 13,75,54 13,75,54 318,5 12,54 323,4 12,73 328,4 12,93 334,2 13,16 73,5 2,89 73,5 2,89 73,5 2,89 73,5 2,89 187,25 7,37 189,7 7,47 192,2 7,57 195,1 7,68 D 13,75,54 13,75,54 13,75,54 13,75, ,72 327,9 12,91 332,9 13,11 338,7 13,33 75,75 2,98 75,75 2,98 75,75 2,98 75,75 2,98 189,5 7,46 191,95 7,56 194,45 7,66 197,35 7,77 D 13,75,54 13,75,54 13,75,54 13,75, ,91 332,9 13,11 337,9 13,3 343,7 13,53 78,25 3,8 78,25 3,8 78,25 3,8 78,25 3, ,56 194,45 7,66 196,95 7,75 199,85 7,87 D 13,75,54 13,75,54 13,75,54 13,75,54 GR47-1 GR47 + GR GR , ,5 67,5 67,5 67,5 67,5 67, , ,5 189, D,9,9,9,9,9, , ,5 69,5 69,5 69,5 69,5 69, , ,5 191,7 194 D,9,9,9,9,9, , ,5 71,5 71,5 71,5 71,5 71, , ,5 192,8 195 D,9,9,9,9,9, , ,5 73,5 73,5 73,5 73,5 73, , ,5 194,8 197 D,9,9,9,9,9,9 325,5 328,5 331,5 334, ,5 75,8 75,8 75,8 75,8 75,8 75,8 19,3 191,8 193,3 194, ,3 D,9,9,9,9,9,9 33,5 333,5 336,5 339, ,5 78,25 78,25 78,25 78,25 78,25 78,25 192,8 194,3 195,8 197,3 199,5 21,8 D,9,9,9,9,9,9 47

46 GR47-2 GR47 + GR mm inc mm inc mm inc mm inc mm inc mm inc 341,5 13,44 345,5 13,6 349,5 13,76 352,5 352, , , ,5 2,66 67,5 2,66 67,5 2,66 67,5 67,5 67,5 2,66 67,5 2, , ,8 2 7, ,25 8,4 26,75 8,14 D 19,5,77 19,5,77 19,5,77 19,5 19,5 19,5,77 19,5,77 345,5 13,6 349,5 13,76 353,5 13,92 357,5 357, , , ,5 2,74 69,5 2,74 69,5 2,74 69,5 69,5 69,5 2,74 69,5 2, ,8 2 7, , ,25 8,12 28,75 8,22 D 19,5,77 19,5,77 19,5,77 19,5 19,5 19,5,77 19,5,77 349,5 13,76 353,5 13,92 357,5 14,7 361,5 361, , , ,5 2,81 71,5 2,81 71,5 2,81 71,5 71,5 71,5 2,81 71,5 2,81 2 7, , , ,25 8,2 21,75 8,3 GR47-1 D 19,5,77 19,5,77 19,5,77 19,5 19,5 19,5,77 19,5,77 353,5 13,92 357,5 14,7 361,5 14,23 365,5 365, , , ,5 2,89 73,5 2,89 73,5 2,89 73,5 73,5 73,5 2,89 73,5 2, , ,3 26 8, ,25 8,28 212,75 8,38 D 19,5,77 19,5,77 19,5,77 19,5 19,5 19,5,77 19,5, , , , ,5 14,74 379,5 14, ,75 2,98 75,75 2,98 75,75 2,98 75,75 75,75 75,75 2,98 75,75 2,98 23,3 8, 26,25 8,12 28,25 8,2 21,25 21,25 212,5 8,37 2 8,46 D 19,5,77 19,5,77 19,5,77 19,5 19,5 19,5,77 19,5, , , , ,5 14,94 384,5, ,25 3,8 78,25 3,8 78,25 3,8 78,25 78,25 78,25 3,8 78,25 3,8 26,75 8,14 28,75 8,22 21,75 8,3 212,75 212,75 2 8,46 217,5 8,56 D 19,5,77 19,5,77 19,5,77 19,5 19,5 19,5,77 19,5,77 vailable flanges and shafts for GR47 Flange ed alberi disponibili per GR47 able flange and shaft \ Flange e alberi 125disponibili 4,921" 47 1,85" 2,787" -9 98,5 3,878" ssima 32 Nm 5,197" O 19,748" 12,14,478" 43 1,693" O 19,748" M14 x 1.5 1:8 8 6,22" 128 5,39" 1:8 Key \ Ling etta UNI-666 4x7,5 [,7"x,295] N 4 O 11,433" 41,2 1,622" 6,236" Type flange 3-9 Flangia tipo ,85" 146 5,748" O 12 4,724" Type shaft 3-9 lbero tipo 3-9 Max torque / oppia 41,2 1,622" max: 2,787" 32 Nm -,2 22,23 -,1 6,236" 33,3 1,311" NSI-92.1/76 16/32-DP 13T,591" O D 19,5,768" 19,5,768" 19,5,768" able flange and shaft \ Flange e alberi disponibili 125 4,921" vailable flange and 47 1,85" shaft 2,787" \ Flange e alberi disponi Type \ Tipo F3-9 98,5 3,878" Max torque \ oppia massima 32 Nm 5,197" O 19,748" 12,14,478" 43 1,693" M14 x 1.5 1:8 8 6,22" 128 5,39" 43 1,693" O 5,8 -,3 -,6 2" -,12 -,24 Key \ Ling etta 1:8 UNI-666 4x7,5 [,7"x,295] N 4 O 11,433" E-T13 assima 6 Nm 2,787" 6,236" 174 6,85" 146 5,748" O 12,875" -,8 -,39 -,2 22,23 -,1 6 33,3,236" 1,311" NSI-92.1/76 16/32-DP 13T O D vailable flange and shaft \ Flange e alberi dispon 47 1,85" 5,197" 125 4,921" 98,5 3,878" 12,14,478" 43 1,693" O 5,8 -,3 -,6 M14 x ,22" 128 5,39" Key \ Ling etta UNI-666 4x7,5 [,7"x,295] N 4 O 11,433" Type \ Tipo FSE-T13 Max torque \ oppia massima 6 Nm 41,2 1,622" 174 6,85" 146 5,748" O 12 4,724",875" -,8 -,39 -,2 22,23 -,1 33,3 1,311" O D 19,5,768" -9 ssima 32 Nm 2,787" 47 1,85" 5,197" 125 4,921" 98,5 3,878" O 19,748" 12,14,478" O 5,8 -,3 -,6 2" -,12 -,24 M14 x ,22" 128 5,39" Key \ Ling etta UNI-666 4x7,5 [,7"x,295] N 4 O 11,433" -T13 ssima 6 Nm 2,787" 41,2 1,622" 174 6,85" 146 5,748" O 12,875" -,8 -,39 -,2 22,23 -,1,875" -,8 -,39 33,3 1,311" O D Type \ Tipo F3-9 Max torque \ oppia massima 32 Nm 2,787" O 5,8 -,3 -,6 2 Type \ Tipo FSE-T13 Max torque \ oppia massima 6 Nm 2,787" NSI-92.1/76 16/32-DP 13T O 11,6 -,5 4",591" -,2 NSI-92.1/76 16/32-DP 13T O 11,6 -,5 4" -,2 Type flange SE-T13 Flangia tipo SE-T13 Type shaft SE-T13 lbero tipo SE-T13 Max torque / oppia max: 6 Nm 48

47 GR55 - Group 3 tandem pumps 23,96" GR55-1 GR55 + GR ,5 25,4 -,1 F 23,96" F D In E Out D In E vailable flange and shaft \ Flange e alberi disponibili 75 9 O 1" -,2 -,39 D E D NSI-92.1/76 16/32-DP T E D E 46 1,811" 6,236" 33,3 1,311" GR28-2 Type \ Tipo FSE-T 46 1,811" 2,787" 4 Max torque \ oppia massima 6 7 Nm mm inc mm inc mm inc mm inc mm inc ,76 329,5 12,97 334,5 13,17 33,3 339,5 13,37 346,4 13,64 81,5 3,21 81,5 3,21 81,5 3,21 81,5 3,21 81,5 3, ,32 188,75 7,43 191,25 7,53 193,75 7,63 197,2 7,76 D 81,5 Out 3,21 81,5 3,21 81,5 3,21 81,5 3,21 81,5 3,21 E 186 7,32 188,75 7,43 191,25 7,53 193,75 7,63 197,2 7,76 F 11,9,47 11,9,47 11,9,47 11,9,47 11,9, ,11 338,5 13,33 343,5 13,52 348,5 13,72 355,4 13,99 vailable flange and shaft \ Flange e alberi disponibili Tipo FSE-T oppia massima 7 Nm 86 3, , , , ,39 19,5 7,5 193,25 7,61 195,75 7,71 198,25 7,81 21,7 7,94 O ports 86 3, , , , ,39 OE ports 89,5 3,52 89,5 3,52 89,5 3,52 89,5 3,52 89,5 3,52 O ports 19,5 7,5 193, ,85" 7,61 195,75 7,71 198,25 7,81 21,7 7,94 2,787" 146 5,748" OE ports 187 7,36 189,75 7,47 192,25 7,57 194,75 7,67 198,2 7,8 O 12 4,724" F 11,9,47 11,9,47 11,9,47 11,9,47 11,9, ,43 346,5 13,64 351,5 13,84 356,5 14,4 363,4 14,31,591" 9 3,54 9 3,54 9 3,54 9 3,54 9 3,54 194,5 7,66 197,25 7,77 199,75 7,86 22,25 7,96 25,7 8,1 O ports 9 3,54 9 3,54 9 3,54 9 3,54 9 3,54 OE ports 93,5 3,68 93,5 3,68 93,5 3,68 93,5 3,68 93,5 3,68 O 11,6 -,5 4" O ports 194,5 7,66 197,25 7,77 199,75 7,86 22,25 7,96 25,7 8,1 OE ports 191 7,52 193,75 7,63 196,25 7,73 198,75 7,82 22,2 7,96 F 11,9,47 11,9,47 11,9,47 11,9,47 11,9, ,86 357,5 14,7 362,5 14,27 367,5 14,47 374,4 14,74 95,5 3,76 95,5 3,76 95,5 3,76 95,5 3,76 95,5 3,76 2 7,87 22,75 7,98 25,25 8,8 27,75 8,18 211,2 8,31 O ports 95,5 3,76 95,5 3,76 95,5 3,76 95,5 3,76 95,5 3,76 OE ports 99 3,9 99 3,9 99 3,9 99 3,9 99 3,9 O ports 2 7,87 22,75 7,98 25,25 8,8 27,75 8,18 211,2 8,31 OE ports 196,5 7,74 199,25 7,84 21,75 7,94 24,25 8,4 27,7 8,18 -, ,85" 146 5,748" F 11,9,47 11,9,47 11,9,47 11,9,47 11,9,47 -,5 25,4 -,1 O 1" -,2 -,39 NSI-92.1/76 16/32-DP T 6,236" 1,311" O 12 4,724",591" O 11,6 -,5 49

48 GR55-1 GR55 + GR D E F G D E GR mm inc mm inc mm inc mm inc 334,5 13,17 339,4 13,36 344,4 13,56 35,2 13,79 81,5 3,21 81,5 3,21 81,5 3,21 81,5 3,21 195,5 7,7 197,7 7,78 2,2 7,88 23,1 8, D 81,5 3,21 81,5 3,21 81,5 3,21 81,5 3,21 E 195,25 7,69 197,7 7,78 2,2 7,88 23,1 8, F 13,75,54 13,75,54 13,75,54 13,75,54 343,5 13,52 348,4 13,72 353,4 13,91 359,2 14, , , , ,39 199,75 7,86 22,2 7,96 24,7 8,6 27,6 8,17 O ports 86 3, , , ,39 OE ports 89,5 3,52 89,5 3,52 89,5 3,52 89,5 3,52 O ports 199,75 7,86 22,2 7,96 24,7 8,6 27,6 8,17 OE ports 196,25 7,73 198,7 7,82 21,2 7,92 24,1 8,4 F 13,75,54 13,75,54 13,75,54 13,75,54 351,5 13,84 356,4 14,3 361,4 14,23 367,2 14,46 9 3,54 9 3,54 9 3,54 9 3,54 23,75 8,2 26,2 8,12 28,7 8,22 211,6 8,33 O ports 9 3,54 9 3,54 9 3,54 9 3,54 OE ports 93,5 3,68 93,5 3,68 93,5 3,68 93,5 3,68 O ports 23,75 8,2 26,2 8,12 28,7 8,22 211,6 8,33 OE ports 2,25 7,88 22,7 7,98 25,2 8,8 28,1 8,19 F 13,75,54 13,75,54 13,75,54 13,75,54 362,5 14,27 367,4 14,46 372,4 14,66 378,2 14,89 95,5 3,76 95,5 3,76 95,5 3,76 95,5 3,76 29,25 8,24 211,7 8,33 214,2 8,43 217,1 8,55 O ports 95,5 3,76 95,5 3,76 95,5 3,76 95,5 3,76 OE ports 99 3,9 99 3,9 99 3,9 99 3,9 O ports 29,25 8,24 211,7 8,33 214,2 8,43 217,1 8,55 OE ports 25,75 8,1 28,2 8,2 21,7 8,3 213,6 8,41 F 13,75,54 13,75,54 13,75,54 13,75,54 GR38-2 GR55-1 GR55 + GR D E mm inc mm inc mm inc mm inc mm inc mm inc , , , ,66 351,5 13, ,2 81,5 3,21 81,5 3,21 81,5 3,21 81,5 3,21 81,5 3,21 81,5 3, ,76 198,5 7,81 2 7,87 21,5 7,93 23,75 8,2 26 8,11 D 81,5 3,21 81,5 3,21 81,5 3,21 81,5 3,21 81,5 3,21 81,5 3,21 E 197 7,76 198,5 7,81 2 7,87 21,5 7,93 23,75 8,2 26 8,11 F,9,63,9,63,9,63,9,63,9,63,9, , , , ,2 36,5 14, , , , , , , ,39 21,5 7, ,99 24,5 8,5 26 8,11 28,25 8,2 21,5 8,29 O ports 86 3, , , , , ,39 OE ports 89,5 3,52 89,5 3,52 89,5 3,52 89,5 3,52 89,5 3,52 89,5 3,52 O ports 21,5 7, ,99 24,5 8,5 26 8,11 28,25 8,2 21,5 8,29 OE ports 198 7,8 199,5 7, ,91 22,5 7,97 24,75 8,6 27 8, F,9,63,9,63,9,63,9,63,9,63,9,63 5

49 GR55-1 GR55 + GR38 75 D E 9 D E GR mm inc mm inc mm inc mm inc mm inc mm inc , , , ,33 368,5 14, ,69 9 3,54 9 3,54 9 3,54 9 3,54 9 3,54 9 3,54 25,5 8,9 27 8, 28,5 8, ,27 212,25 8,36 214,5 8,44 O ports 9 3,54 9 3,54 9 3,54 9 3,54 9 3,54 9 3,54 OE ports 93,5 3,68 93,5 3,68 93,5 3,68 93,5 3,68 93,5 3,68 93,5 3,68 O ports 25,5 8,9 27 8, 28,5 8, ,27 212,25 8,36 214,5 8,44 OE ports 22 7,95 23,5 8,1 25 8,7 26,5 8,13 28,75 8, ,31 F,9,63,9,63,9,63,9,63,9,63,9, , , ,76 379,5 14,94 378,5 14,9 384,12 95,5 3,76 95,5 3,76 95,5 3,76 95,5 3,76 95,5 3,76 95,5 3,76 95,5 3,76 95,5 3,76 95,5 3,76 95,5 3,76 95,5 3,76 95,5 3,76 O ports 99 3,9 99 3,9 99 3,9 99 3,9 99 3,9 99 3,9 OE ports 99 3,9 99 3,9 99 3,9 99 3,9 99 3,9 99 3,9 O ports 211 8,31 212,5 8, ,43 2,5 8,48 217,75 8, ,66 OE ports 27,5 8, ,23 21,5 8, ,35 214,25 8,44 216,5 8,52 F,9,63,9,63,9,63,9,63,9,63,9,63 GR55-1 GR55 + GR D E 75 D E 9 D E GR mm inc mm inc mm inc mm inc mm inc mm inc 377,5 14,86 381,5,2 385,5,18 389,5,33 394,51 399,71 81,5 3,21 81,5 3,21 81,5 3,21 81,5 3,21 81,5 3,21 81,5 3, , , , ,82 226,25 8,91 228,75 9,1 D 81,5 3,21 81,5 3,21 81,5 3,21 81,5 3,21 81,5 3,21 81,5 3,21 E 218 8, , , ,82 226,25 8,91 228,75 9,1 F 19,5,77 19,5,77 19,5,77 19,5,77 19,5,77 19,5,77 386,5,22 39,5,37 394,5,53 398,5,69 43, ,6 86 3, , , , , ,39 222,5 8,76 224,5 8,84 226,5 8,92 228,5 9, 23,75 9,8 233,25 9,18 O ports 86 3, , , , , ,39 OE ports 89,5 3,52 89,5 3,52 89,5 3,52 89,5 3,52 89,5 3,52 89,5 3,52 O ports 222,5 8,76 224,5 8,84 226,5 8,92 228,5 9, 23,75 9,8 233,25 9,18 OE ports 219 8, , , ,86 227,25 8,95 229,75 9,5 F 19,5,77 19,5,77 19,5,77 19,5,77 19,5,77 19,5,77 394,5,53 398,5,69 42,5,85 46,5 16, , ,38 9 3,54 9 3,54 9 3,54 9 3,54 9 3,54 9 3,54 226,5 8,92 228,5 9, 23,5 9,7 232,5 9, 234,75 9,24 237,25 9,34 O ports 9 3,54 9 3,54 9 3,54 9 3,54 9 3,54 9 3,54 OE ports 93,5 3,68 93,5 3,68 93,5 3,68 93,5 3,68 93,5 3,68 93,5 3,68 O ports 223 8, , , ,37 24,25 9,46 242,75 9,56 OE ports 228,5 9, 23,5 9,7 232,5 9, 234,5 9,23 236,75 9,32 239,25 9,42 F 19,5,77 19,5,77 19,5,77 19,5,77 19,5,77 19,5,77 45,5,96 49,5 16,12 413,5 16,28 417,5 16, , ,81 95,5 3,76 95,5 3,76 95,5 3,76 95,5 3,76 95,5 3,76 95,5 3, , , , ,37 24,25 9,46 242,75 9,56 O ports 95,5 3,76 95,5 3,76 95,5 3,76 95,5 3,76 95,5 3,76 95,5 3,76 OE ports 99 3,9 99 3,9 99 3,9 99 3,9 99 3,9 99 3,9 O ports 232 9, , , ,37 24,25 9,46 242,75 9,56 OE ports 228,5 9, 23,5 9,7 232,5 9, 234,5 9,23 236,75 9,32 239,5 9,43 F 19,5,77 19,5,77 19,5,77 19,5,77 19,5,77 19,5,77 51

50 F GR55 + GR D mm inc mm inc mm inc mm inc O OE O OE O OE O OE O OE O OE O OE O OE 395,55 44, , ,5 3,21 81,5 3,21 81,5 3,21 81,5 81, ,94 231,5 9,11 235,5 9, D 81,5 3,21 81,5 3,21 81,5 3,21 81,5 81,5 E 227 8,94 231,5 9,11 235,5 9, F 23,91 23,91 23, , , , ,1 86 3, , , ,39 231,5 9, , ,45 245,5 9,67 O ports 86 3, , , ,39 OE ports 89,5 3,52 89,5 3,52 89,5 3,52 89,5 3,52 23,96" E O ports 231,5 9, ,5 9,29 9, ,5 9,45 9,59 245, ,67 9,8 OE ports 228 8,98 232, , 9,29 236,5 24 9,31 9, ,5 9,53 9,67 23,96" F 23,91 23,91 23,91 23, , , , , ,54 9 3,54 9 3,54 9 3,54 235,5 9, , ,61 249,5 9,82 D 75 In E F G O ports 9 3,54 9 3,54 9 3,54 9 3,54 OE ports 93,5 3,68 93,5 3,68 93,5 3,68 93,5 3,68 O ports 235,5 9, ,5 9,45 9, ,5 9,61 9,74In 249, ,82 9,96 OE ports 232 9,13 236,5 24 9,31 9,45 24, ,47 9, ,5 9,69 9,82 F 23,91 23,91 23,91 23, , , , ,76 95,5 3,76 95,5 3,76 95,5 3,76 95,5 3, ,49 245,5 9,67 249,5 9, ,4 9 D O ports 95,5 3,76 95,5 3,76 95,5 3,76 95,5 3,76 OE ports 99 3,9 99 3,9 99 3,9 99 3,9 Out E O ports 241 9,49 245, ,67 9,8 249, ,82 9, Out 258,5 1,4 1,18 OE ports 237,5 9, ,5 9,53 9, ,5 9,69 9,82 251, ,9 1,4 F 23,91 23,91 23,91 23,91 vailable flanges and shafts for GR55 Flange ed alberi disponibili per GR55 e and shaft \ Flange e alberi disponibili 46 1,811" 6,236" 2,787" 174 6,85" 146 5,748" O 12 4,724" 46 1,811" 6,236" 2,787" 174 6,85" 146 5,748" O 12 4,724" -,5 25,4 -,1 O 1" -,2 -,39 33,3 1,311",591" -,5 25,4 -,1 O F D E vailable flange and shaft \ Flange e alberi disponibil Type \ Tipo FSE-T Max torque \ oppia massima 7 Nm 1" -,2 -,39 33,3 1,311" NSI-92.1/76 16/32-DP T O 11,6 -,5 4" -,2 NSI-92.1/76 16/32-DP T Type flange SE-T Flangia tipo SE-T Type shaft SE-T lbero tipo SE-T Max torque / oppia max: 7 Nm 52

51 GR72 - Group 4 tandem pumps GR72-1 GR72 + GR ,75 1,171" F 29,75 1,171" F D E D E ,417" O 38,1 -,1 -, 1,5" -,39 -,59 62,1 2,445" 6,3,248" NSI-92.1/76 16/32-DP 23T GR47-2 vailable flange and shaft \ Flange e alberi disponibili mm inc mm inc mm inc mm inc mm inc mm inc 43,5 16,95 434,5 17,11 438,5 17,26 442,5 17, , ,8 Type \ Tipo FSED-T23 125,5 4,94 125,5 Max 4,94 torque \ oppia 125,5 massima 12 Nm 4,94 125,5 4,94 125,5 4, ,512" 125,5 4, , , ,9 6,3,248" 233 9,17 235,25 9,26 237,75 9,36 D 128,5 5,6 128,5 5,6 128,5 5,6 128,5 5,6 128,5 5,6 128,5 5,6 E 224 8, , , ,6 232,25 9,14 234,75 9,24 F 19,5,77 19,5,77 19,5,77 19,5,77 19,5,77 19,5,77 433,5 17,7 437,5 17,22 441,5 17,38 445,5 17, , ,91 vailable flange and shaft \ Flange e alberi disponibili Type \ Tipo FSED-T23 Max torque \ oppia massima 12 Nm 127 5, 127 5, 127 5, 127 5, 127 5, 127 5, 228,5 9, 23,5 9,7 232,5 9, 234,5 9,23 236,75 9,32 239,25 9,42 D 134 5, , , , , ,28 E 221,5 8,72 223,5 8,8 225,5 8,88 227,5 8,96 229,75 9,5 232,25 9,14 F 2,787" 19,5, ,512" 19,5,77 19,5,77 19,5,77 19,5,77 19,5,77 228,6 9" 443,5 17,46 447,5 17,62 451,5 17,78 455,5 17, , ,31 O 2 7,874" 132 5, , , , , ,2 233,5 9,19 235,5 9,27 237,5 9,35 239,5 9,43 241,75 9,52 244,25 9,62 22,866" D 145 5, , , , , ,71 E 22,5 8,68 222,5 8,76 224,5 8,84 226,5 8,92 228,75 9,1 231,25 9,1 F 19,5,77 19,5,77 19,5,77 19,5,77 19,5,77 19,5,77 O 2,4 -,5 6" -,2 36 1,417" , , , ,35 47,5 18,52 475,5 18,72 137,25 5,4 137,25 5,4 137,25 5,4 137,25 5,4 137,25 5,4 137,25 5,4 238,75 9,4 24,75 9,48 242,75 9,56 244,75 9, ,72 249,5 9,82 D,25 5,92,25 5,92,25 5,92,25 5,92,25 5,92,25 5,92 E 225,75 8,89 227,5 8,96 229,75 9,5 231,75 9, ,21 236,5 9,31 F 19,5,77 19,5,77 19,5,77 19,5,77 19,5,77 19,5, , , , ,74 48,5 18,92 485,5 19,11 142,25 5,6 142,25 5,6 142,25 5,6 142,25 5,6 142,25 5,6 142,25 5,6 243,75 9,6 245,75 9,68 247,75 9,75 249,75 9, ,92 254,5 1,2 D 5,25 6,11 5,25 6,11 5,25 6,11 5,25 6,11 5,25 6,11 5,25 6,11 E 23,75 9,8 232,75 9,16 234,75 9,24 236,75 9, ,41 241,5 9,51 F 19,5,77 19,5,77 19,5,77 19,5,77 19,5,77 19,5,77 474,5 18,68 478,5 18,84 482,5 19, 486,5 19, , ,53 147,5 5,81 147,5 5,81 147,5 5,81 147,5 5,81 147,5 5,81 147,5 5, , , , ,4 257,25 1,13 259,75 1,23 D 16,5 6,32 16,5 6,32 16,5 6,32 16,5 6,32 16,5 6,32 16,5 6,32 E 236 9, , , ,53 244,25 9,62 246,75 9,71 F 19,5,77 19,5,77 19,5,77 19,5,77 19,5,77 19,5,77 O 38,1 -,1 -, 1,5" -,39 -,59 62,1 2,445" NSI-92.1/76 16/32-DP 23T 2,787" 228,6 9" O 2 7,874" O 2,4 -,5 6" 22,866" -,2 53

52 GR55-2 GR72 + GR mm inc mm inc mm inc mm inc O OE O OE O OE O OE O OE O OE O OE O OE , , , ,74 125,5 4,94 125,5 4,94 125,5 4,94 125,5 4, ,29 24,5 9,47 244,5 9, ,84 D 128,5 5,6 128,5 5,6 128,5 5,6 128,5 5,6 E 233 9,17 237, ,3 9, ,4 9, ,5 9,7 9,8 F 23, , , ,5 9, ,5 251,5 D 134 5, E 23,5 9, ,5 9,2 9, ,5 9,4 9,5 244, ,6 9,7 F 23, , , ,5 9, ,5 256,5 D 145 5, E 234,7 9, ,5 9,2 9, ,5 9,3 9,5 243, ,5 9,7 GR72-1 F 23,91 23,91 23,91 23,91 471,5 18,56 48,5 18,92 488,5 19,23 499,5 19,67 137,2 5,4 137,2 5,4 137,2 5,4 137,2 5,4 247,7 9,75 252,2 9,93 256,2 1,9 261,7 1,3 D,3 5,92,3 5,92,3 5,92,3 5, E 234,7 9,24 239,2 242,7 9,6 9,7 243,2 246,7 9,7 9,9 248,7 252,2 9,9 1,1 F 23,91 23,91 23,91 23,91 481,5 18,96 49,5 19,31 498,5 19,63 59,5 2,6 142,2 5,6 142,2 5,6 142,2 5,6 142,2 5,6 252,7 9,95 257,2 1,13 261,2 1,28 266,7 1,5 D 5,25 6,11 5,25 6,11 5,25 6,11 5,25 6,11 E 239,7 9,44 244,2 247,7 9,6 9,7 248,2 251,7 9,7 9,9 253,7 257,2 9,9 1,1 F 23,91 23,91 23,91 23, , , ,4 52 2,47 147,5 5,81 147,5 5,81 147,5 5,81 147,5 5, ,16 262,5 1,33 266,5 1, ,71 D 16,5 6,32 16,5 6,32 16,5 6,32 16,5 6,32 E 245 9,65 249, ,8 9,9 253, ,9 1, ,5 1,2 1,3 F 23,91 23,91 23,91 23,91 54

53 F F GR72-2 GR72 + GR mm inc mm inc mm inc mm inc mm inc mm inc 559,8 22,4 562,8 22,16 572,8 22,55 583,3 22,96 593,3 23,36 63,8 23,77 125,5 4,94 125,5 4,94 125,5 4,94 125,5 4,94 125,5 4,94 125,5 4, ,8 12,39 316,3 12,45 321,3 12,65 326,55 12,86 331,55 13,5 336,8 13,26 D 128,5 5,6 128,5 5,6 128,5 5,6 128,5 5,6 128,5 5,6 128,5 5,6 E 314,8 12,39 32,3 12,61 331,3 13,4 336,5 13,25 341,55 13,45 346,8 13,65 F 29,7 1,17 29,7 1,17 29,7 1,17 29,7 1,17 29,7 1,17 29,7 1,17 562,8 22,16 565,8 22,28 575,8 22,67 586,3 23,8 596,3 23,48 66,8 23, , 127 5, 127 5, 127 5, 127 5, 127 5, 1 316,3 12,45 317,8 12,51 322,8 12, , ,11 338,3 13,32 D 134 5, , , , , ,28 E 312,3 12,3 317,8 12,51 328,8 12, , ,35 344,3 13,56 F 29,7 1,17 29,7 1,17 29,7 1,17 29,7 1,17 29,7 1,17 29,7 1,17 572,8 22,55 575,8 22,67 585,8 23,6 596,3 23,48 66,3 23,87 616,8 24, , , , , , , ,3 12,65 322,8 12,71 327,8 12, , , ,5 D 145 5, , , , , ,71 E 311,3 12,26 316,8 12,47 327,8 12, , ,31 343,3 13,52 GR72-1 F 29,7 1,17 29,7 1,17 29,7 1,17 29,7 1,17 29,7 1,17 29,7 1,17 583,3 22,96 586,3 23,8 596,3 23,48 66,8 23,89 616,8 24,28 627,3 24,7 137,2 5,4 137,2 5,4 137,2 5,4 137,2 5,4 137,2 5,4 137,2 5,4 326,5 12, , ,11 338,3 13,32 343,3 13,52 348,5 13,72 D,2 5,91,2 5,91,2 5,91,2 5,91,2 5,91,2 5,91 E 316,5 12, , ,11 338,3 13,32 343,3 13,52 348,5 13,72 F 29,7 1,17 29,7 1,17 29,7 1,17 29,7 1,17 29,7 1,17 29,7 1,17 593,3 23,36 596,3 23,48 66,3 23,87 616,8 24,28 626,8 24,68 637,3 25,9 29,75 1,171" 29,75 1,171" 142,2 5,6 142,2 5,6 142,2 5,6 142,2 5,6 142,2 5,6 142,2 5, ,5 13, , ,31 343,3 13,52 348,3 13,71 353,5 13,92 D 5,2 6,11 5,2 6,11 5,2 6,11 5,2 6,11 5,2 6,11 5,2 6,11 D E E 321,5 12, , ,31 343,3 13,52 348,3 13,71 D353,5 13,92 E F 29,7 1,17 29,7 1,17 29,7 1,17 29,7 1,17 29,7 1,17 29,7 1,17 63,8 23,77 66,8 23,89 616,8 24,28 627,3 24,7 637,3 25,9 647,8 25,5 147,5 5,81 147,5 5,81 147,5 5,81 147,5 5,81 147,5 5,81 147,5 5, ,8 13,26 338,3 13,32 343,3 13,52 348,5 13,72 353,5 13,92 358,8 14,13 D 16,5 6,32 16,5 6,32 16,5 6,32 16,5 6,32 16,5 6,32 16,5 6,32 E 326,8 12,87 332,3 13,8 343,3 13,52 348,5 13,72 353,5 13,92 358,8 14,13 F 29,7 1,17 29,7 1,17 29,7 1,17 29,7 1,17 29,7 1,17 29,7 1,17 vailable flange and shaft \ Flange e alberi disponibili \ Tipo FSED-T23 \ oppia massima 12 Nm vailable flanges and shafts for GR72 Flange ed alberi disponibili per GR72 62,1 2,445" 2,787" Type flange SED-23T 6,3,248" Flangia tipo SED-23T 267 1,512" 228,6 9" O 2 7,874" Type shaft SED-23T lbero tipo SED-23T Max torque / oppia max: 12 Nm vailable flange and shaft \ Flange e Type \ Tipo FSED-T23 Max torque \ oppia massima 12 Nm 62,1 2,445" 6,3,248" 2,787" 36 1,417" 22,866" 36 1,417" O 38,1 -,1 -, 1,5" -,39 -,59 NSI-92.1/76 16/32-DP 23T O 2,4 -,5 6" -,2 O 38,1 -,1 -, 1,5" -,39 -,59 NSI-92.1/76 16/32-DP 23T 55

54 Settima, Italy Headquarter, r&d and production US Warehouse SI Ltd. Sales Office Settima Meccanica Srl Settima Piacenza (Italia) tel fax info@settima.it PR216 56