Brief Overview to Fuels & Materials Compatibility

Transcription

1 Brief Overview to Fuels & Materials Compatibility Edward W. English, II Vice President Technical Director Fuel Quality Services, Inc.

2 OVERVIEW General Background Petroleum Based Fuels Biodiesel Blend Fuels Ethanol Blend Fuels Conclusion

3 General Background UST configuration: Tank & Piping Pump System Dispenser & Nozzle Vapor Recovery System External Environment Controls: Corrosion Protection Leak Detection Overfill Protection Spill Protection Required by 40 CFR 280 No Internal Environmental Controls

4 General Background Typical materials include Metals aluminum, brass, copper, steel, zinc Non-metals Elastomers - Flexible hoses, seals gaskets and packing, Thermoplastics - Underground flex piping, sumps and vapor recovery tubing, Thermosets - Rigid piping and USTs, Ceramics, pipe dope, and organic coatings

5 General Background Release of product from underground storage tanks (UST) poses a significant threat to the environment and human health by contamination of local ground water. 1977, Provincetown Massachusetts 1980, Glenwood Colorado 1983, Dover-Walpole Massachusetts

6 General Background Product types for USTs Petroleum based fuels Biomass based fuels

7 General Background Petroleum based fuels Aviation Diesels Jet Motor Gasolines

8 General Background Simple Structures In Petroleum Fuels: Linear & branched hydrocarbons Cyclic R Aromatic & Polyaromatic

9 General Background In general petroleum based fuels are: Considered benign, electrically non-conductive and noncorrosive, do not absorb into or permeate through metals, typically not observed to significantly swell or permeate [thermoset] fiberglass tanks, rigid piping, and sumps Have been observed to swell and permeate some thermoplastic and elastomeric materials,

10 General Background Biomass Fuels: Biodiesel B100 B20 Ethanol E10 E85

11 General Background Simple Structures In Biomass Fuels: Biodiesel O O Ethanol

12 General Background In general biomass based fuels: Can be more aggressive than petroleum based fuels, Can be electrically conductive therefore corrosive, Are capable of permeating non-metals, Contain chemical functional groups that increase chemical activity, reactivity, and bioavailability Significantly increase in biodegradability

13 General Background Material compatibility concerns with USTs include: Compatibility between the product and the metallic and nonmetallic system components, Compatibility between contaminants and the metallic and nonmetallic system components Compatibility between the product, contaminants and in-tank equipment.

14 General Background Petroleum Biodiesel E10 & E85 Dissolved Water = 100 ppm ppm 4,000-40,000 ppm Free Water Yes Yes No

15 General Background General Definition for Compatibility: For metals, compatibility often implies corrosion resistance. For non-metals compatibility often implies resistance to a change in properties due to chemical exposure,

16 General Background 40CFR Definitions for Compatible: COMPATIBLE means the ability of two or more substances to maintain their respective physical and chemical properties upon contact with one another for the design life of the tank system under conditions likely to be encountered in the UST. Specification does not differentiate between product or contaminants [water].

17 General Background Symptoms of material incompatibility in UST: Corrosion of metallic components Galvanic or pitting corrosion Accelerated corrosion due to microbial activity - Microbially Influenced Corrosion (MIC), Leaking, swelling, and damage to non-metallic components Degradation in performance or output of internal instrumentation,

18 General Background Generally, factors that contribute to the corrosion of metals include: Water & chemical contaminants Microorganisms (bacteria, yeast, and mold) Change in solution ph, due to acids from microbial metabolites Metal alloys Anodic soft metals that corrode under galvanic conditions

19 General Background Petroleum Biodiesel E10 & E85 Dissolved Water = 100 ppm ppm ,000 ppm Free Water Yes Yes No Metal Corrosion Below water line Primarily below the water line Overall system corrosion

20 General Background Primary Sources of Water and Contaminants Ventilation System, moist air, dust, airborne particles Pipeline Industrial/Retail Tanker Distribution Refinery, warm sterile product

21 General Background Secondary Source of Water and Contaminants Steel Tank Institute: Keeping Water Out of Your Storage System, March 2004

22 General Background Tertiary Source of Water and Contaminants Installation of new UST: Using water to ballast UST during construction and installation,

23 Effects of Water in Fuels Diesel Gasoline Biodiesel

24 Effects of Water in a UST Pump End Fill End

25 Examples of metal corrosion

26 Examples of metal corrosion

27 Examples of metal corrosion

28 General Background Factors that contribute to degradation of nonmetallic components, Solvent ingress driven by some type of gradient, Interaction between the solvent and elastomer or polymer matrix, Loss antioxidants, fillers, heat stabilizers, plasticizers due to solvent permeation, Solvent diffusion effecting strength and stiffness.

29 General Background Symptoms of material incompatibility in UST:, Discoloration Swelling Degradation Elongation/Creep Softening / Jellying Embrittlement Delamination

30 General Background Elastomers: Dynamic Applications - up to a 10-15% swell can usually be tolerated Static applications - up to 30% swell in O ring volume can be tolerated,

31 Examples of non-metal degradation: Courtesy: Ernest M. Roggelin, FDEP/UST, Lustline #47

32 Examples of non-metal degradation: Titled: Swelling and Bulging Source: Mississippi Department of Environmental Quality, January 2003.

33 Examples of non-metal degradation: Titled: Soft and Spongy Source: Mississippi Department of Environmental Quality, January Courtesy: Ernest M. Roggelin, FDEP/UST, Lustline #47

34 Examples of non-metal degradation: Titled: Delamination or Microbial Growth Source: Mississippi Department of Environmental Quality, January 2003.

35 Example of thermoset degradation: Fiberglass Tank Section Aircraft Wing Tank Staining Close Up Spider Fracture

36 Example of thermoset degradation:

37 PETROLEUM BASED FUELS Gasolines Diesels

38 Petroleum Based Fuels Recommended Metals No known issues with existing metals aluminum, carbon steel, stainless steel, and bronze, Not Recommended Metals; Copper & Zinc Both are oxidative catalysts that will accelerate the formation of sediment, gels and soaps (ASTM D975, Appendix X2.7.2 )

39 Petroleum Based Fuels Recommended Elastomers No known issues with most existing elastomers, Not Recommended Elastomers No known issues with most existing elastomers. Exceptions noted

40 Experimental Data ULSD Test IASH September 2005 Elastomer type Compound designation 200 % Volume Change of Elastomers in ULS Diesel Acrylonitrile-butadiene (nitrile) 5 Acrylonitrile-butadiene (nitrile) - 6 NBR(33% ACN) NBR(28% ACN) 180 Epichlorohydrin -3 ECO* % Volume change Time (hours) Courtesy of: Janice I. Hetherington* and Stephanie Green, CIIR CSM ECO EPDM FKM(69%F) Cranfield University, Defence Academy of the United Kingdom. FKM(71%F) HNBR NBR(28%F) NBR(33%ACN) NR SBR Fluorocarbon-1&2 Fluorocarbon -1&2 Hydrogenated nitrile-4 Chlorinated Isobutylene Isopropene (Chlorobutyl) Ethylene-propylene Styrene-butadiene Natural Rubber Chlorosulphonated polyethylene -7 FKM (69% F) FKM (71% F) HNBR* CIIR EPDM SBR NR CSM

41 Petroleum Based Fuels Recommended Polymers; No known issues with most existing elastomers,, Not Recommended Polymers; No known issues with most existing elastomers,

42 Petroleum Based Fuels Other Important Compatibility Issues: Generally, there should be few material compatibility issues between petroleum product and currently approved system materials, The presence of water will continue to promote and support MIC as well as general corrosion below the water line,

43 Petroleum Based Fuels Other Important Compatibility Issues: The ubiquitous presence of water and microbes water in the petroleum distribution, storage, and distribution system assures: System degradation due to MIC (microbially influenced corrosion), Metal corrosion, Equipment damage and,

44 BIODIESEL BLEND FUELS

45 Biodiesel Recommended Metals Most metals found in a retail fueling facility including stainless steel, carbon steel, or aluminum Not Recommended Metals; brass, bronze, copper, lead, tin, and zinc will accelerate oxidation of biodiesel and create insoluble sediment or gels and salts. Lead solders, zinc linings, copper pipes, brass regulators and copper fittings should be avoided,

46 Biodiesel Elastomers PTFE - Teflon Polyamide - Nylon 6/6 Fluorocarbon Viton A401-C & GFLT Nitrile Fluorosilicone Polyurethane Polypropylene Polyvinyl Polyvinyl Polyvinylchloride - Tygon Blend B100 B100 B100 B100 B100 B100 B100 B100-B30 B20 B10 B100 Compared to Diesel Little Change Little Change Little Change Hardness? - 20% : Swell? - 18% Hardness Neg. : Swell? - 7% Hardness Neg. : Swell? - 6% Hardness? - 10% : Swell? % Worse Comparable Worse

47 % Volume change Biodiesel IASH September 2005 % Volume Change of Elastomers in RME Biodiesel Time (hours) Courtesy of: Janice I. Hetherington* and Stephanie Green, Cranfield University, Defence Academy of the United Kingdom. CIIR CSM ECO EPDM FKM(69%F) FKM(71%F) HNBR NBR(28%F) NBR(33%ACN) NR SBR Elastomer type Acrylonitrile-butadiene (nitrile)-6 Acrylonitrile-butadiene (nitrile)-5 Epichlorohydrin-3 Fluorocarbon-2 Fluorocarbon-1 Hydrogenated nitrile-4 Chlorinated Isobutylene Isopropene (Chlorobutyl) Ethylene-propylene Styrene-butadiene Natural Rubber Chlorosulphonated polyethylene Compound designation NBR(33% ACN) NBR(28% ACN) ECO FKM (69% F) FKM (71% F) HNBR CIIR EPDM SBR NR CSM

48 Biodiesel IASH September 2005 Elastomer type Compound designation 150 % Volume Change of Elastomers in RCO Biodiesel Acrylonitrile-butadiene (nitrile)-5 Acrylonitrile-butadiene (nitrile)-6 NBR(33% ACN) NBR(28% ACN) %Volume change Time (hours) CIIR CSM ECO EPDM FKM(69%F) FKM(71%F) HNBR NBR(28%F) NBR(33%ACN) NR SBR Epichlorohydrin-4 Fluorocarbon-1&2 Fluorocarbon-1&2 Hydrogenated nitrile-3 Chlorinated Isobutylene Isopropene (Chlorobutyl) Ethylene-propylene Styrene-butadiene Natural Rubber ECO FKM (69% F) FKM (71% F) HNBR CIIR EPDM SBR NR Courtesy of: Janice I. Hetherington* and Stephanie Green, Cranfield University, Defence Academy of the United Kingdom. Chlorosulphonated polyethylene CSM

49 Biodiesel Compatible Polymers; Polyamide Polyethylene Polypropylene Acryl & Epoxy (paints) Incompatible Polymers: Hypalon (chlorosulfonated polyethylene) Polyurethanes

50 Biodiesel Vegetable Oil Production (Billions pounds/year) Soybean * Corn Cottonseed Sunflower Peanuts Others Total Animal Fats (Billions pounds/year) Inedible Tallow Yellow Grease Poultry Fat Edible Tallow Lard & Greases Total

51 Biodiesel Manufacturing Process

52 Biodiesel Simple Structure Fatty Acid Methyl Ester: Fatty Acid O Methyl Ester Group O

53 Biodiesel / Diesel Comparison Simple Structures In Petroleum Fuels: Linear & branched hydrocarbons Cyclic R Aromatic & Polyaromatic

54 Biodiesel / Biodeterioration Mono alkyl ester fatty acid: O O Enzymatic attack of the terminal methyl group O O - CH 3 Fatty Acid + free methyl group (Solubility proportional to carbon length)

55 Biodiesel Potential Issues and Concerns (B100): B100 is a strong solvent and will release varnish and gums from diesel fuel tank walls and piping into the bulk fuel plugging in-line filters, Biodiesel is hygroscopic and can hold between ppm water, Biodiesel not meeting ASTM D6751 can damage equipment and plug filters, (i.e., Minnesota B2 issue)

56 Biodiesel Other Potential Issues and Concerns: Aerobically, biodiesel will biodegrade in seven (7) days Anaerobically, biodiesel will biodegrade in 14 days, Biodiesel has a very favorable biodegradation profile B100 can biodegrade 4 times faster than petroleum diesel B20 can biodegrade twice as fast as petroleum diesel,

57 Biodiesel

58 Biodiesel Potential Issues and Concerns (General): Aged biodiesel can form aggressive acids that result in further damage, The water-fuel interface can be very corrosive to the UST systems components and can also promote microbial growth, Biodiesel has been used successfully to biostimulate and bioremediate crude oil spills

59 ETHANOL BLEND FUELS

60 Ethanol Blends E10 Recommended Metals E-blend fuels = 10% do not pose a materials compatibility issue for metals including: aluminum, carbon steel, stainless steel, and bronze, Not Recommended Metals; Zinc-galvanized is not recommended for E10 blends

61 Ethanol Blends E85 Recommended Metals; Stainless steel (Best) Mild steel Unplated steel Black Iron Bronze Nickel Plated (for soft metals such as aluminum or brass fittings) Not Recommended Metals; Aluminum Brass Copper Alloys Lead Lead Solder Tern-plated steel Zinc

62 Ethanol Blends E10 Recommended Elastomers Fluorocarbons Fluorosilicone, Buna-N (hoses & gaskets), Natural rubber Polychloroprene (hoses & gaskets), Polysulfide rubber Not Recommended Elastomers Buna-N (seals), Polychloroprene (seals), Urethane rubber

63 Ethanol Blends E85 Recommended Elastomers Fluorocarbon Buna-N, Nitrile Rubbers Polychloroprene Polytetrafluoroethylene Not Recommended Elastomers Natural rubber Cork gasket material, Leather,

64 Ethanol Blends E10 Recommended Polymers; Acetal Polyamides Polypropylene Polytetrafluoroethylene Fiberglass reinforced plastic Not Recommended Polymers; Polyurethane Alcohol-based pipe dope

65 Ethanol Blends E85 Recommended Elastomers Polypropylene Thermoset reinforced fiberglass Thermoplastic piping, UL Listed fiberglass tanks, Not Recommended Elastomers Polyurethane, PVC, polyamides, methyl-methacrylate plastics, Certain thermoplastics and thermoset resins* *epoxies and polyester resins manufactured between 1970 s and 1980 s

66 Ethanol Blends Potential Issues and Concerns, Phase Separation Fuel Conductivity/Corrosion Solvent Action Compatibility and Permeability

67 Ethanol Blends Phase Separation: Water not soluble in gasoline, EtOH and water are infinitely soluble in each other Gasoline can hold ~ 0.19%, E10 can hold ~ 0.49%, Water/Ethanol will phase separate once fuel is water saturated, Water absorption is why EtOH and E10 blends cannot be shipped via pipeline,

68 Ethanol Blends Fuel conductivity / Corrosion Gasoline is benign and nonconductive, EtOH has greater conductive (10-9 mho/cm) Water & chemical contaminants are soluble in EtOH and will increase overall conductivity of EtOH blended fuels, Water saturated E10 may experience wet corrosion, galvanic, or electrolytic corrosion,

69 Ethanol Blends Solvent Action Fuel blended with EtOH can loosen rust and concretions from interior walls of tanks and suspend sediment, Compatibility/Permeability: Potential compatibility issues between ethanol blended fuels and system metals and non-metals, due to the solution conductivity and activity of the alcohol,

70 Ethanol Blends Factors that contribute to degradation of nonmetallic components, Permeation (solvent ingress driven by chemical activity gradient) Swelling (interaction between the solvent, elastomer or polymer), Plasticizer Extraction Loss or migration of antioxidants, heat stabilizers, plasticizers out of a elastomers and flexible thermoplastics by the solvent), Deplasticization (solvent diffusion effecting strength and stiffness)

71 Ethanol Blends Activity of MtBE, Toluene, and Isooctane as a function of ether in ASTM Fuel C Activity of EtOH, Toluene, and Isooctane as a function of ether in ASTM Fuel C Toluene MtBE EtOH Toluene Isooctane Isooctane

72 Conclusion

73 Petroleum Based Fuels Summary: In theory, material compatibility issues between petroleum based fuels and currently approved system materials should be minimal, Water is generally present in the fuel storage, distribution, and dispensing system. Water supports a variety of corrosion processes including galvanic corrosion and pitting corrosion,

74 Petroleum Based Fuels Summary: The presence of water supports microbial growth which accelerates metal corrosion, equipment damage and contributes to equipment performance degradation due to the presence of MIC, Current corrosion mitigation methods only target external corrosion processes, Internal corrosion due to the presence of water and MIC are not mitigated or cured using current corrosion mitigation tools such as cathodic protection.

75 Biodiesel Potential Issues and Concerns (B100): B100 is a strong solvent and will release varnish and gums tank walls and piping into the bulk fuel plugging in-line filters, Biodiesel not meeting ASTM D6751 can damage equipment and plug filters, (i.e., Minnesota B2 issue) Aged biodiesel can form aggressive acids that result in further system corrosion, Cold temperatures or cold temperature spikes will cause certain biodiesel to gel.

76 Biodiesel Summary Biodegradability of biodiesel makes it a excellent candidate for use in environmentally sensitive areas, However, the presence of water supports microbial growth which accelerates metal corrosion, equipment damage and equipment malfunction due to the presence of MIC. Current corrosion mitigation methods only target external corrosion processes Internal corrosion due to the presence of water and MIC are not mitigated or cured using current corrosion mitigation tools such as cathodic protection.

77 Ethanol Blends E10 Summary E10 blends have been in use for nearly three decades, Most, if not all, material compatibility issues have been identified and resolved, For fuel system conversions, thoroughly clean, dewater, and inspect tanks before placing into service, Use materials that are approved for use with ethanol (i.e., state approved or UL approved),

78 Ethanol Blends E10 Summary Housekeeping and an active surveillance program are still needed to minimize the effects of water and aqueous contaminants that contribute to: Corrosion mechanisms of metals, Microbial growth (E10 only), Degradation of elastomers, thermoplastics, and possibly thermosets, Potential degradation of internal instrumentation readout.

79 Ethanol Blends E85 Summary For fuel conversion, always use an experienced, licensed and bonded installer to clean and install E85 tanks, E85 fuel could be contaminated during blending, transportation, storage, and dispensing, Install and use properly sized in-line filters on the dispensers, (e.g., particle size and efficiency), Vehicles can experience problems weeks or months after site installation or conversion,

80 Ethanol Blends E85 Summary Consult with State and Local agencies regarding installation or conversion guidelines or requirements, Use only E85 compatible equipment or equipment approved by UL, Ethanol content for E85 is at a sufficient level to prevent microbial influenced corrosion.

81 Edward W, English, II Vice President and Technical Director, Fuel Quality Services, Inc. P.O. Box 1380 Flowery Branch, GA (770) Jim Hansen President, Downstream Fuel Quality Services, Inc. 309 Mohawk Drive Rotterdam Junction, NY cell office fax