> CR-TEC Butterfly Valves

Size: px
Start display at page:

Download "> CR-TEC Butterfly Valves"

Transcription

1 > Butterfly Valves

2 > Butterfly Valves Resilient Seated Series CRV37 Bi-Directional, 100% Tight Shut Off, Low Torque Equipped with Manual Handle, Gearbox Handwheel, or Pneumatic or Electric Actuators. 2

3 PARTS LIST >Butterfly Valves: CRV37 Series 1 Body 2 Shaft 3 Disc 4 Seat 5 O-Ring 6 Circlip 7 Washer 8 Flange 9 Bolt BREAK DOWN BY SIZE 10 to 16 Inch DN 250 to /4 to 8 Inch DN 32 to 200 3

4 BODY CONSTRUCTION MATERIAL CHOICES Cast Iron GJL-250 Nodular Iron GJS Nodular Iron GJS Stainless Steel AISI 304 Stainless Steel AISI 316 >Butterfly Valves Cast Carbon Steel Aluminum Bronze C-352 Aluminum Bronze C-415 Other Alloys SHAFT DISC SEAT Stainless Steel AISI 304 Stainless Steel AISI 316 Stainless Steel AISI 420 Csat Iron GJL-250 Nodular Iron GJS Nodular Iron GJS Stainless Steel AISI 304 Stainless Steel AISI 316 Cast Carbon Steel Aluminum EPDM High Temperature EPDM Nitrile (BUNA) PTFE F.P.M. (VITON) Hastelloy Monel Other Alloys Bronze C-352 Aluminum Bronze C-415 Hastelloy Uranus B6 Monel K 500 Other Alloys Silicone Food Silicone Steam Silicone Nordel Hypalon MATERIAL SELECTION GUIDE NAME COMPOSITION COLOR APPLICATIONS LIMITATIONS WORKING TEMP EPDM Ethylene-Propylene Thermopolymer ENB Mineral acid solutions, mineral bases alkaline solutions, organic salts solutions, alcohols, water and sea water. Not recommended for hydrocarbons. -5 C to 90 C EPDM HT Ethylene-Propylene Thermopolymer ENB Super heated water. Not recommended for hydrocarbons. -10 C to 110 C NBR (BUNA) Acrylonitrile-Butadiene Copolymer Mineral oils, vegetables oils, gas, nonaromatic hydrocarbons, animal fats, vegetable fats, air. Organic acids, some mineral acids, chlorine, alcohols, aromatic hydrocarbons. -10º C a 80º C CSM (HYPALON) Chlorosulphonate Polyethylene Mineral acid solutions, organic and inorganic acids, oxidizing substances. Mineral and vegetable oils, hydrocarbons, animal and vegetable fats, acetones, nitric acid. -10º C a 80º C FPM (VITON) Hexafluorpropylene Copolymer Vinylidene Fluoride Acids, fats, hydrocarbons, vegetable and mineral oils, fuels. Steam and hot water (max 30 C), unleaded gasoline, acetone, amines, Freon º C a 180º C NR (POLY- SOPRENO) Polysoprene Homopolymer Water, alcohols, abrasion resistance, Acetones, foods. Hydrocarbons, acids, bases, and atmospheric agents. -10º C a 60º C MVQ (SILICONE) Poly Methyl Vinyl Siloxane Homopolymer White Red/ Low and high temperature resistance, food. Hydrocarbons, strong acids, strong bases, super heated water, steam. -30º C a 150º C STEAM SILICONE Grey Steam and super heated water. Hydrocarbons, strong acids and strong bases. -50º C a 160º C 4

5 DIMENSIONS Wafer >Butterfly Valves: CRV37 Series 5

6 DIMENSIONS Lug >Butterfly Valves: CRV37 Series 6

7 VALVE INSTALLATION >Butterfly Valves: CRV37 Series Lug Butterfly Valves Lug style valves install between pipe flanges. Bolts are threaded into tapped the valves tapped holes from each side of the valve s mounting flange. Wafer Butterfly Valves Wafer style butterfly valves are sandwiched between pipe flanges. They install between flanges wit bolts that span the body. WORKING PRINCIPLE OPEN CLOSED A butterfly valve consists fo a circular disc with a stem through the middle. When opened, the disc pivots 90 degrees in the valve bore, aligning with the flow, creating a nearly unrestricted flow path. When the valve closes, the disc will contact the seat creating a tight seal. Butterfly valves are useful for on/off services as well as applications with throttle flow. 7

8 >Butterfly Valves: CRV37 Series Please contact for additional information on our CRV37 series butterfly valves, including information on Teflon valves, high-temperature metalseated valves, watertight metal-seated valves. Our standard valves are lug and wafer style, but double flanged is available. Contact us for a quote. Engineering Inc. 15 Orchard Park Road, Unit 18 Madison, CT USA info@crtec.com Phone: or

BELGICAST is a company of. Butterfly Valves

BELGICAST is a company of. Butterfly Valves BELGICAST is a company of Butterfly Valves TALIS the number one choice for all valve-related products. TALIS is the major brand whenever products and services are needed for the water cycle. The brands

More information

Section 18 Butterfly Valves

Section 18 Butterfly Valves Section 18 Butterfly Valves Edition 2 261 [18] BUTTERFLY VALVES Butterfly Valves Resilient seat Butterfly Valves are used in a wide range of Industries including HVAC, Gas, Petrochemical, Pulp & Paper,

More information

Technische Dokumentation Technical Documentation

Technische Dokumentation Technical Documentation Technische Dokumentation Technical Documentation XOMOX Resilient Seated Butterfly Valves Series 7500 XOMOX International GmbH & Co. OHG Dok. Nr.: tdb_7500_gb Von-Behring-Straße 15 D-88131 Lindau / Deutschland

More information

BELGICAST is a company of. Butterfly Valves

BELGICAST is a company of. Butterfly Valves BELGICAST is a company of Butterfly Valves TALIS the number one choice for all valve-related products. TALIS is the major brand whenever products and services are needed for the water cycle. The brands

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron EN GJS body

Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron EN GJS body Size : Ends : Min Temperature : Max Temperature : DN 32 to 1400 mm Between flanges GN10/16 and ASA150-10 C (with EPDM seat ) + 90 C ( with EPDM seat, temporarily 110 C ) Max Pressure : 16 Bars up to DN200

More information

Size : Ends : Min Temperature : Max Temperature : Reinforced lug from DN200 to DN1400 MADE OF STAINLESS...

Size : Ends : Min Temperature : Max Temperature : Reinforced lug from DN200 to DN1400 MADE OF STAINLESS... MADE OF STAINLESS... Reinforced lug from DN200 to DN1400 Size : Ends : Min Temperature : Max Temperature : DN 32 to 1400 mm Between flanges PN10/16-10 C ( with EPDM seat ) + 110 C ( with EPDM seat ) Max

More information

PRZEPUSTNICE. B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3

PRZEPUSTNICE. B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3 BUTTERFLY VALVES PRZEPUSTNICE TYPE DESCRIPTION NOMINAL PRESSURE TEMPERATURE DIAMETER STANDARD PAGE B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3 B-099 Centric butterfly valve

More information

Series PVI/PVIF. Standard and Full Port Eccentric Plug Valves Conforming to AWWA C517

Series PVI/PVIF. Standard and Full Port Eccentric Plug Valves Conforming to AWWA C517 M M Series PVI/PVIF Standard and Full Port Eccentric Plug Valves Conforming to AWWA C517 Publication 517-105 Issue 11/13 Design Features Implementations The Eccentric Plug valve is the industry standard

More information

MADE OF STAINLESS...

MADE OF STAINLESS... MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 32 to 1400 mm Between flanges PN10/16 and ISO PN20 ANSI150-10 C (with EPDM seat ) + 110 C ( with EPDM seat ) Max Pressure : 16

More information

SINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6

SINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6 Application Single-eccentric butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control

More information

SINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6

SINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6 Application Single-eccentric butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control

More information

Ref LUG BUTTERFLY VALVE. Model/Ref:

Ref LUG BUTTERFLY VALVE.   Model/Ref: LUG BUTTERFLY VALVE Model/Ref: 1160 1168 Reinforced lug from DN200 to DN1400 : www.lauridsenindustri.com Reinforced lug from DN200 to DN1400 : Size : Ends : Min Temperature : Max Temperature : DN 32 to

More information

RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com

RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N

More information

SERIES CVI AWWA C508 SWING CHECK VALVES 2-48

SERIES CVI AWWA C508 SWING CHECK VALVES 2-48 SERIES CVI AWWA C508 SWING CHECK VALVES -48 508-103 R0 June 018 LIFTING LUGS & ACCESSORY HOLE VSI check valve covers come standard with stainless steel lifting lugs for ease of install and movement in

More information

ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN

ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric

More information

Ref WAFER BUTTERFLY VALVE. Model/Ref:

Ref WAFER BUTTERFLY VALVE.  Model/Ref: Ref. 1150-1158 WAFER BUTTERFLY VALVE Model/Ref: 1150-1158 www.lauridsenindustri.com Ref. 1150-1158 Size : Ends : Min Temperature : Max Temperature : DN 32 to 1400 mm Between flanges PN10/16 and ISO PN20

More information

VSI. Series BFII WATERWORKS. BUTTERFLY VALVES CONFORMING TO AWWA C504 Replaceable Seated 24-Inch and Greater Butterfly Valve

VSI. Series BFII WATERWORKS. BUTTERFLY VALVES CONFORMING TO AWWA C504 Replaceable Seated 24-Inch and Greater Butterfly Valve M M Series BFII BUTTERFLY VALVES CONFORMING TO AWWA C504 Replaceable Seated 24-Inch and Greater Butterfly Valve Publication 504-106 Issue 06/12 Design Features General All AWWA Butterfly Valves are of

More information

VALVE COMPANY WAFER & LUG TYPE BUTTERFLY VALVES

VALVE COMPANY WAFER & LUG TYPE BUTTERFLY VALVES VALVE COMPANY WAFER & LUG TYPE BUTTERFLY VALVES GENERAL CHARACTERISTICS: BS EN 593 CONSTRUCTION: Body: ENGJL Cast Iron (GG25) Disc : Stainless Steel Seat : EPDM, NBR, FPM (Viton) Stem : XCr13 (Stainless

More information

SERIES GVI AWWA C509/C515 RESILIENT SEATED GATE VALVES 2-48

SERIES GVI AWWA C509/C515 RESILIENT SEATED GATE VALVES 2-48 SERIES GVI AWWA C509/C515 RESILIENT SEATED GATE VALVES 2-48 509-110 R6 OCT 2018 REPLACEABLE 0-RINGS Triple O-ring sealed with upper two O-rings replaceable with the valve fully open and subjected to the

More information

BI-ECCENTRIC Disc Retention Valve

BI-ECCENTRIC Disc Retention Valve 05/11/2015 - Oscillating disc retention valve with dual eccentricity and straight seat. - Option of manufacturing WAFER type or with flange boring in accordance with customer requirements. - Distance between

More information

DOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7

DOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7 Application Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close the passage of the working medium flowing through a pipeline. They can also be used for flow-control

More information

FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-05 (Rev. 08/2015)

FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-05 (Rev. 08/2015) General Description The FKB Knife-gate valves model VGU-05 brings cost-effective solution to block the flow of abrasive fluids. These are strong equipments to be installed between flanges, which has Wafer

More information

COMPANY PROFILE TABLE OF CONTENT. Our products have been supplied to local and foreign customers for the following industries:

COMPANY PROFILE TABLE OF CONTENT. Our products have been supplied to local and foreign customers for the following industries: UTTERFLY VALVES TALE OF CONTENT COMPANY PROFILE The company ARMATURY Group a.s. is a leading Czech manufacturer and distributor of industrial valves, fittings and control systems for valves. The annual

More information

Soft seat. Torque values tables 13 Head losses tables 14 Flange and bolts tables 15 Flanges 16 Tests 16

Soft seat. Torque values tables 13 Head losses tables 14 Flange and bolts tables 15 Flanges 16 Tests 16 soft seat PD, KI Series 1 technical data 1 components DN 0-300 2 components DN 30-00 3 KI Series 4 components DN 600-800 4 KA, KX tecnical data technical data KA series 6 components DN 40-300 6 components

More information

Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE

Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE The B model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging

More information

KNIFE GATE VALVE Product Ref. : KG02W/KG02L

KNIFE GATE VALVE Product Ref. : KG02W/KG02L General Description Model KG02 is a bidirectional knife gate valve suitable for most industrial application cases. With one piece body design, it combines robust and economy giving best cost effective

More information

WAFER BUTTERFLY VALVES

WAFER BUTTERFLY VALVES WAFER BUTTERFLY VALVES Actuator flange accomodate all type of operators; handle, gear, electric and pneumatic actuator Strong precision key gives positive attachment for manual lever or actuator. Shaft

More information

BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic

BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic

More information

VTB 200 Butterfly valves

VTB 200 Butterfly valves VTB 200 Butterfly valves Adress http://www.vapo.nl Vapo Techniek BV Esp 258 5633 AC Eindhoven Netherlands T: +31(0)40 248 10 00 F: +31(0)40 248 10 40 E: vapo@vapo.nl Table of Contents VTB200 3 General

More information

BIDIRECTIONAL WAFER Knife Gate Valve

BIDIRECTIONAL WAFER Knife Gate Valve 31/07/2014 BIDIRECTIONAL WAFER Knife Gate Valve - Bidirectional wafer-design knife gate valve. - One-piece cast body. - Provides high flow rates with low pressure drop. - Various seat and packing materials

More information

Titan Check Valves. Call. Fax. . Visit. Titan Flow Control. Your Pipeline to the Future

Titan Check Valves. Call. Fax.  . Visit. Titan Flow Control. Your Pipeline to the Future Your Pipeline to the Future TITAN 290 Corporate Drive Lumberton, NC 28358 Titan Check Valves, Inc. is a high quality manufacturer of check valves. With a dedication to great customer service, cutting edge

More information

HOPPER SHAPE KNIFE GATE VALVE

HOPPER SHAPE KNIFE GATE VALVE HOPPER SHAPE KNIFE GATE VALVE The C model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). makes it ideal for use

More information

BI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR

BI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR BI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH RISING STEM & HANDWHEEL KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR KGV-XD FULLY LUGGED WITH BONNET & HADNWHEEL The XD model knife gate is a Bi-directional

More information

butterfly valves Quality, Service A history of and Innovation

butterfly valves Quality, Service A history of and Innovation A history of Quality, Service and Innovation Now in its ninth decade, Conbraco Industries, Inc. is a leading manufacturer of flow control products for U.S. and international markets. The company s headquarters

More information

THROUGH CONDUIT KNIFE GATE VALVE. OBX 09/11 2nd EDITION Revision 1 Reserves the right to change specifications without notice

THROUGH CONDUIT KNIFE GATE VALVE. OBX 09/11 2nd EDITION Revision 1 Reserves the right to change specifications without notice THROUGH CONDUIT KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging shut off on either normal or

More information

L15 HEAVY DUTY KNIFE GATE VALVE STANDARD PARTS LIST

L15 HEAVY DUTY KNIFE GATE VALVE STANDARD PARTS LIST L15 HEAVY DUTY KNIFE GATE VALVE The L15 model knife gate is a uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body

More information

HOPPER SHAPE KNIFE GATE VALVE

HOPPER SHAPE KNIFE GATE VALVE HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the

More information

P.E.D. 2014/68/EU Butterfly Valves Series SL, SLT and SLK Group 1-2 Class I, II, III ATEX CE Ex II 2 GD

P.E.D. 2014/68/EU Butterfly Valves Series SL, SLT and SLK Group 1-2 Class I, II, III ATEX CE Ex II 2 GD AVS-Power Oy Rusthollarinkatu 8 02270 Espoo Finland info at avs-power.fi P.E.D. 2014/68/EU Butterfly Valves Series SL, SLT and SLK 1. GENERAL 1.1 CONSTRUCTION Small size and light construction gives advantage

More information

BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES WITH D/A PNEUMATIC ACTUATOR

BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES WITH D/A PNEUMATIC ACTUATOR BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES KGV XD-PRE SERIES FULLY LUGGED WITH RISING STEM & HANDWHEEL KGV XD-PRE SERIES FULLY LUGGED WITH D/A PNEUMATIC ACTUATOR KGV XD-PRE SERIES FULLY LUGGED WITH

More information

WAFER STYLE KNIFE GATE VALVE

WAFER STYLE KNIFE GATE VALVE 11 WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off

More information

BUTTERFLY VALVE 17 SERIES Gearbox

BUTTERFLY VALVE 17 SERIES Gearbox DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2

More information

KNIFE GATE VALVES -- MODEL A

KNIFE GATE VALVES -- MODEL A PRODUCT DESCRIPTION Wafer style, uni-directional knife gate valve. One piece integral cast body with guides to support the gate and seating wedges. High flow rates with low pressure drops. Several seat

More information

BI-DIRECTIONAL KNIFE GATE VALVE

BI-DIRECTIONAL KNIFE GATE VALVE BI-DIRECTIONAL KNIFE GATE VALVE The model knife gate is a bi-directional valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on suspended

More information

UNIDIRECTIONAL Knife Gate Valve

UNIDIRECTIONAL Knife Gate Valve 30/10/2013 UNIDIRECTIONAL Knife Gate Valve Unidirectional knife gate valve, with wafer design and quick opening and closing. Body made up of two screwed down halves, with slides to provide smooth operation.

More information

KNIFE GATE VALVES -- MODEL D

KNIFE GATE VALVES -- MODEL D PRODUCT DESCRIPTION Flanged unidirectional knife gate valve for high pressure applications One piece integral cast body with seating wedges and bolted bonnet. High flow rates with low pressure drops. Several

More information

PASCO PASCO PINCH VALVES

PASCO PASCO PINCH VALVES Pinch Valves 7 PASCO PASCO PINCH VALVES www.processautomationinc.net 126 1 General Pinch valve is simple in construct. It is made of three parts, i.e. body, pipe sleeve and actuator. Its superior performance

More information

BUTTERFLY VALVE SERIES Pneumatic actuator - El-O-Matic

BUTTERFLY VALVE SERIES Pneumatic actuator - El-O-Matic B C D BUTTERFLY VALVE - 223 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B PD PE PD C D F Kg PE

More information

UNIDIRECTIONAL Knife Gate Valve

UNIDIRECTIONAL Knife Gate Valve UNIDIRECTIONAL Knife Gate Valve 24/04/2013 Unidirectional knife gate valve. One piece cast body with guides to support gate and seat wedges. Provides high flow rates with low pressure drop. Various seat

More information

Transportation Valves

Transportation Valves Transportation Valves A Name You ve Trusted for Years... 780 Series Butterfly Valves Features: Available in sizes 3 thru 6 One handle fits sizes 3 thru 6 Integrated 180º notch plate eliminates mounting

More information

WAFER STYLE KNIFE GATE VALVE

WAFER STYLE KNIFE GATE VALVE WAFER STYLE KNIFE GATE VALVE The EX(SER.10) model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging

More information

Wafer, Semi Lug, Lug and Flanged Type

Wafer, Semi Lug, Lug and Flanged Type Year : Wafer, Semi ug, ug and Flanged Type API 607 Fire Safe Page 1 Year : Description Specification : GVC double eccentric High Performance butterfly valves suitable for bi-directional flow and bubble

More information

BIDIRECTIONAL WAFER Knife Gate Valve

BIDIRECTIONAL WAFER Knife Gate Valve 05/10/2012 BIDIRECTIONAL WAFER Knife Gate Valve Bidirectional wafer design knife gate valve. Monoblock one piece cast iron body. Stainless steel gate. Two rubber sleeves. Provides high flow rates with

More information

BUTTERFLY VALVES + UM ELECTRIC ACTUATOR

BUTTERFLY VALVES + UM ELECTRIC ACTUATOR 1150-1183 BUTTERFLY VALVES + UM ELECTRIC ACTUATOR FEATURES 1150-1183 butterfly valves are intended for the automatic opening /closing of very diverse fluid pipes. The valve body is made of GS cast iron.

More information

DUCTILE IRON & STAINLESS STEEL Butterfly Valves

DUCTILE IRON & STAINLESS STEEL Butterfly Valves DELTATPRODUCTS NSF/ANSI 372 LOW LEAD CONTENT ONLY MC#218481 3 Year Limited Warranty DUCTILE IRON & STAINLESS STEEL Butterfly Valves 2 24 200/150 PSI Bi-Directional Service DTP-BFV-12.001.R4 DeltaT 050/051

More information

KEYSTONE BUTTERFLY VALVE PARASEAL RANGE

KEYSTONE BUTTERFLY VALVE PARASEAL RANGE The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications FEATURES GENERAL APPLICATION Water, food and beverage processing,

More information

SQUARE PORT KNIFE GATE VALVE

SQUARE PORT KNIFE GATE VALVE SQUARE PORT KNIFE GATE VALVE The model knife gate is a square port low-pressure valve for highly solid loaded fluids or solids, mainly used in bulk handling and silo outlet applications in industries such

More information

BUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - El-O-Matic

BUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - El-O-Matic B C D BUTTERFLY VALVE - N123 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B PD PE PD C D F Kg PE

More information

UNIDIRECTIONAL WAFER Knife Gate Valve

UNIDIRECTIONAL WAFER Knife Gate Valve 29/01/2016 UNIDIRECTIONAL WAFER Knife Gate Valve Unidirectional wafer design knife gate valve. One piece cast body with guides to support gate and seat wedges. Provides high flow rates with low pressure

More information

KEYSTONE BUTTERFLY VALVE PARASEAL RANGE

KEYSTONE BUTTERFLY VALVE PARASEAL RANGE The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications FEATURES GENERAL APPLICATION Water, food and beverage processing,

More information

WAFER STYLE KNIFE GATE VALVE

WAFER STYLE KNIFE GATE VALVE MODEL WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut

More information

UNIDIRECTIONAL Guillotine Valve

UNIDIRECTIONAL Guillotine Valve Unidirectional "LUG" guillotine valve. Monobloc cast body with interior slides for optimum movement of the gate during operation. Provides high flow rates with low pressure drop. Various seat and packing

More information

Keystone Butterfly valve ParaSeal range

Keystone Butterfly valve ParaSeal range The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications Features General application Water, food and beverage processing,

More information

2-20 (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company

2-20 (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company BUTTERFLY VALVES RESILIENT SEATED SERIES 30/31 Wafer/Lug 2-20 (50mm-500mm) The High Performance Company SERIES 30/31 2-20 (50mm-500mm) Bray Controls is proud to offer a high quality line of butterfly valves

More information

3 Year MAS D & S SERIES. DUCTILE IRON & STAINLESS STEEL Butterfly Valves BUTTERFLY VALVES. Warranty. Limited /150 PSI Bi-Directional Service

3 Year MAS D & S SERIES. DUCTILE IRON & STAINLESS STEEL Butterfly Valves BUTTERFLY VALVES. Warranty. Limited /150 PSI Bi-Directional Service MAS D & S SERIES BUTTERFLY VALVES VALVES AND FITTINGS 3 Year Limited Warranty Contact MA Stewart For Details DUCTILE IRON & STAINLESS STEEL Butterfly Valves 2 24 200/150 PSI Bi-Directional Service MAS-BFV-12.001.R4

More information

SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING

SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division

More information

WAFER STYLE KNIFE GATE VALVE

WAFER STYLE KNIFE GATE VALVE WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on

More information

UNIDIRECTIONAL Knife Gate Valve

UNIDIRECTIONAL Knife Gate Valve 12/04/2016 UNIDIRECTIONAL Knife Gate Valve Unidirectional knife gate valve. Mechanically welded body. Various seat and packing materials available. Face to face dimension in accordance with standard, it

More information

S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR

S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,

More information

BIDIRECTIONAL Knife Gate Valve

BIDIRECTIONAL Knife Gate Valve BIDIRECTIONAL Knife Gate Valve 30/10/2013 Bidirectional knife gate valve. Two piece cast body, joined by screws, with internal guides for smooth movement of gate during operation. Provides high flow rates

More information

BIDIRECTIONAL WAFER Knife Gate Valve

BIDIRECTIONAL WAFER Knife Gate Valve 09/03/2016 BIDIRECTIONAL WAFER Knife Gate Valve Bidirectional wafer design knife gate valve. Monoblock one piece cast iron body. Stainless steel gate. Two rubber sleeves. Provides high flow rates with

More information

Concentric butterfly valves

Concentric butterfly valves Lug Between flanges PN10/16 1135 Lever Disc GGG40 nickel plated / Seat EPDM.../10: flanges PN10.../16: flanges PN16 DN 40 50 65 80 100 125 150 200/10 200/16 250/10 250/16 300/10 300/16 16 16 16 16 16 16

More information

BUTTERFLY VALVE VF-7 Series

BUTTERFLY VALVE VF-7 Series BUTTERFLY VALVE VF-7 Series CENTRIC, RUBBER SEATED LEVER GEAR PNEUMATIC - ELECTRIC OPERATED ALLOWABLE PRESSURE DN 40 300mm : 16 bar DN 350 1200mm : 10 bar INVESTMENT CASTING STAINLESS STEEL BODY 2 12 (50mm

More information

RUBBER SLEEVE KNIFE GATE VALVE

RUBBER SLEEVE KNIFE GATE VALVE RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve

More information

BI-DIRECTIONAL KNIFE GATE VALVE

BI-DIRECTIONAL KNIFE GATE VALVE Wastewater treatment plants Food and Beverage Chemical plants Sizes: Working pressure: DN 2"/ 50mm to DN 10"/ 250mm DN 12"/300mm to DN 16"/ 400mm DN 18"/450mm DN 20"/500mm to DN 24"/ 600mm DN 28"/700mm

More information

DIAPHRAGM VALVES b y H a k o h a v V a l v e s

DIAPHRAGM VALVES b y H a k o h a v V a l v e s b y H a k o h a v V a l v e s DIAPHRAGM VALVES by Hakohav Valves ABOUT US QUALITY RELIABILITY Kim Valves started up as Hakohav Valves in 1963 by two young visionary engineers who set their goal to become

More information

FEATURES AND PARTICULARS

FEATURES AND PARTICULARS FIL-PEMTO S.p.A. (GT FLEX Division) Operating office: Via Saronno, 225 21042 Caronno Pertusella (VA) - ITALY Phone: +39-02-96458166 / 02-96457700 Fax: +39-02-73965061 E-Mail: commerciale@gtflex.eu Web:

More information

SIL. DESPONIA - Butterfly valve DN Description. Product features

SIL. DESPONIA - Butterfly valve DN Description. Product features Description Centric butterfly valve with elastomer liner for liquids and gases in the industrial range, general services, water treatment,... Product features Body construction Wafer DN 25-1000 D3 Lug

More information

RESILIENT SEATED BUTTERFLY VALVES

RESILIENT SEATED BUTTERFLY VALVES DESIGN FEATURES APPLICATIONS: HVAC Chemical/Petrochemical Processing Food and Beverage Industry Power and Utilities Pulp and Paper Industry Stem Configuration: Gives positive attachment for handles or

More information

BUTTERFLY VALVES + NA ELECTRIC ACTUATOR

BUTTERFLY VALVES + NA ELECTRIC ACTUATOR 1150-1158 BUTTERFLY VALVES + NA ELECTRIC ACTUATOR CHARACTERISTICS The butterfly valves 1150 to 1158 are dedicated to the automatic opening/shut-off of various fluid pipes. It has a ductile iron body. Thanks

More information

BrewSeal butterfly valves Wafer and lugged

BrewSeal butterfly valves Wafer and lugged Wafer and lugged KEYSTONE Resilient seated butterfly valves DN40-DN800 wafer and lugged versions, optimized for the food and beverage industry. Features Top bushing absorbs actuator side thrust loads.

More information

SIGEVAL BUTTERFLY VALVES EXPORTING PRICE LIST Certification ISO Ed UNE-EN-ISO 9001

SIGEVAL BUTTERFLY VALVES EXPORTING PRICE LIST Certification ISO Ed UNE-EN-ISO 9001 SIGEVAL BUTTERFLY VALVES 0 0 6 2 Certification ISO-9001 EXPORTING Ed.00-11 BUTTERFLY VALVE TYPE FL(w) Handlever FL(w)-3 FL(w)-5 FL(w)-3 FL(w)-5 FL(w)-3 FL(w)-5 FL(w)-3 FL(w)-5 FL(w)-3 FL(w)-5 Body: Wafer

More information

BALL VALVES BUTTERFLY VALVES GLOBE VALVES GATE VALVES CHECK VALVES KNIFE VALVES Y STRAINERS ACTUATION BALL VALVES SS2020N-300 2 PIECE FLANGED ANSI 300 BALL VALVE Firesafe Certified Full Bore TMF1600 seats

More information

ptfe seated 30 years of high quality experience

ptfe seated 30 years of high quality experience ptfe seated BUTTERFLY VALVES ed TT Series 1 technical data 1 components DN 50-300 Stainless steel disc Stainless steel + PTFE disc 3 tables components DN 350-500 dimensions 5 torque values 6 Installation

More information

Wafer, Semi Lug, Lug and Flanged Type

Wafer, Semi Lug, Lug and Flanged Type Year : Wafer, Semi Lug, Lug and Flanged Type Page 1 Year : Specification Description : GVC concentric rubber lined butterfly valves suitable for bi-directional flow and bubble tight shut-off at full rated

More information

L32.5S FIG WAFER BUTTERFLY VALVE

L32.5S FIG WAFER BUTTERFLY VALVE Working medium Depending on the seat Working temperature From -10 C to 110 C (for EPDM seats) Depending on the seat DN 32-1400 PN 10-16 Maximal pressure Up to DN 300 16 bar Above DN 350-10 bar Technical

More information

Sealing Test Pressure (MPa)

Sealing Test Pressure (MPa) TRIPLE ECCENTRIC BUTTERFLY VALVE Triple Eccentric Butterfly Valve provides a tight shut-off. This geometry ensures that the disc seal contacts the body seat only at the final shut-off position without

More information

UNIDIRECTIONAL Gate Valve

UNIDIRECTIONAL Gate Valve 23/04/2013 UNIDIRECTIONAL Gate Valve Unidirectional flanged gate valve (bidirectional option to order), designed for high pressure applications, with self cleaning seal. Single piece die cast body with

More information

Butterfly Valves. Jenkins Valves 254 Henry Street Brantford, Ontario N3T 5T7 Tel: Tel: Fax:

Butterfly Valves. Jenkins Valves 254 Henry Street Brantford, Ontario N3T 5T7 Tel: Tel: Fax: Butterfly Valves Jenkins Valves 254 Henry Street Brantford, Ontario N3T 5T7 Tel: 519-759-3911 Tel: 800-563-6302 Fax: 519-759-7970 www.craneenergy.com A Crane Co. Company Butterfly Valves Ordering Information

More information

F low L ine 72/73 Wafer & Lug Style Sizes 2-24

F low L ine 72/73 Wafer & Lug Style Sizes 2-24 F low L ine 72/73 Wafer & Lug Style Sizes 2-24 Cartridge Seated Butterfly Valves KEY FEATURES Body One piece wafer and lugged body for strength and stability in extreme environments Wafer bodies have a

More information

ACE VALVE COMPANY LIMITED

ACE VALVE COMPANY LIMITED ISO 14001 ISO 9001 ACE VALVE COMPANY LIMITED Http://www.ace-valve.co.kr Technological Knowhow of ACE VALVE A Top -ranking company in the 21st century by challenging the potential ACE VALVE has provided

More information

BUTTERFLY VALVE - WAFER FAF 3500

BUTTERFLY VALVE - WAFER FAF 3500 PRODUCTION STANDARDS DN40 DN600 PN 6-10-16 CLASS 150 Design EN 593 Connection Wafer Type ISO 7005-1 EN 1092-1 Face to Face EN 558 Series 20 Marking EN 19 Tests EN 12266-1 Corrosion Protection Electrostatic

More information

SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING

SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING SUNY GENESEO 220523-1 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply

More information

Technical changes kept in reserve WAFER STYLE KNIFE GATE VALVE. DN 50 to DN 250: 10 kg/cm² DN 300 to DN 400: 6 kg/cm²

Technical changes kept in reserve WAFER STYLE KNIFE GATE VALVE. DN 50 to DN 250: 10 kg/cm² DN 300 to DN 400: 6 kg/cm² WAFER STYLE KNIFE GATE VALVE The A model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off

More information

SECTION MISCELLANEOUS VALVES

SECTION MISCELLANEOUS VALVES SECTION 05140 - PART 1 - GENERAL 1.1 WORK OF THIS SECTION A. The WORK of this Section includes providing miscellaneous valves as indicated, complete and operable, including accessories and operators. 1.2

More information

CLASS 400 FORGED BRASS BALL VALVE

CLASS 400 FORGED BRASS BALL VALVE CLASS 400 FORGED BRASS BALL VALVE FIG. 214 Screwed body cap, PTFE seats, Blowout-proof stem. Screwed ends to BS 21. Nickel plated body. Chrome plated ball. UNI-FLO NYLON BALL VALVES FIG. 214NS/NB Features:

More information

UNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:

UNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number: SECTION 230523 GENERAL DUTY VALVES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 DEFINITIONS A. The following

More information

Keystone Butterfly Valve Figure 9

Keystone Butterfly Valve Figure 9 A resilient seated butterfly valve for general purpose applications Features Bubble-tight shut-off at full pressure rating (PTFE lined configuration is drop tight). The seat and the disc are the only two

More information

Michigan State University Construction Standards. GENERAL-DUTY VALVES FOR HVAC PIPING Page

Michigan State University Construction Standards. GENERAL-DUTY VALVES FOR HVAC PIPING Page Page 230523-1 Copyright 2005 by The American Institute of Architects (AIA) Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA Modified by MSU Physical Plant

More information

SB Series Wafer/Lug Butterfly Valves

SB Series Wafer/Lug Butterfly Valves SB Series Wafer/Lug Butterfly Valves Engineering Creative Solutions for Fluid Systems Since 1901 ABOUT PRATT INDUSTRIAL Pratt Industrial specializes in the design, engineering, and worldwide distribution

More information

BUTTERFLY VALVES Resilient Seated

BUTTERFLY VALVES Resilient Seated General Purpose Butterfly Valves 141 Series & 145 Series Item Description Material 1 Body Ductile Iron ASTM A536 (65-45-12) 2 Seat 3 Shaft 4 Disc AVAILABLE OPTIONS 10 Position Handle Gear Operator Infinite

More information