K- ELECTRIC COMPANY TENDER NOTICE

Transcription

1 K- ELECTRIC COMPANY TENDER NOTICE K-Electric Company the utility responsible for Generation, Transmission & Distribution of Electricity to Karachi and its adjoining areas, hereby invites sealed tenders for the procurement / supply as per details given below:- Please Note Collecting Tender Timing as Follows : Monday 09:00 AM to 03:00 PM Friday 09:00 AM to 12:30 PM Tender Opening Date: Tender Fees Rs. 2,000/- BQPS-II - Procurement of SAC, WTP, HRSG & NGC HX instruments PR# FG/893/BQ Press. transducer;mh-75; Press. transducer;mh-75; Air Pressure Transducer; Compressor: MH-75 (75 KW); Part Number: Make: Ingersoll Rand SOV Blowdown (50 NPT); Part# SOV Blowdown (50 NPT); Part# NEMA 1 Compressor Model: MH-75 (75 KW) Make: Ingersoll Rand SOV;drain;TSC3A; SOV;drain;TSC3A; Part# Make - Ingersoll Rand Installed at drain lines of Service Air Dryers CABLE; 3M, R ,SERVO, HRSG DD DAMPER SERVO CABLE CABLE SET 7P Z31 BF6 + 3M (3 Meter) 3M cable with plastic connector Part number: R BOSCH REXROTH HRSG DIVERTER LIMIT SWITCH;DOUBLE ACT ACTUATOR; LIMIT SWITCH;DOUBLE ACT ACTUATOR; Valve Limit Switch P/N: Enclosure: NEMA 4 Rating: 10 A/125/250 VAC, 25A/30VDC Make: Bray Control, USA 3 EA 6 EA

2 TI with Thermowell;0-100 C;Length:15" TI with Thermowell;0-100 C;Length:15 TEMPERATURE INDICATOR WITH THERMOWELL (a) TEMPERATURE INDICATOR Model : S C1E-ND-E400GZZ-ZZZ Model : S 5550, Nominal Size 100, Adjustable Stem & Dial Scale Range : 0 C C Process Connection : 1/2 NPT Stem Diameter : 10 mm Insertion Length L1 : 400 mm WIKA,Germany (b) TERMOWELL Model : TW15-H-A-M-##-UD D1-T ZZ-ZZ Threaded Thermowell TW15, solid machined Process Thread [P or E] : M27 x 2 Instrument Connection [N] : 1/2 NPT Female Insertion Length [U] : 375 mm Material: Monel Make : WIKA,Germany 3 EA Range: deg C; Dial size: 4" Adjustable angle; Process Connection of Thermometers: ½ NPT; Stem Dia of Thermometer: 10mm; Stem length of Thermometer: 15"; Stem dia & length of thermowell accordingly to thermometer; Thermowell internal threads: 1/2" NPT(f); Thermowell external threads: M27x2; Thermowell material: Monel SIGNAL ISOLATOR; SWP 8034, SPLITTER Splitter, Signal Isolaor, MODEL: SWP 8034, Voltage: 24 V DC, Make: Suzhou xun peng instrumentation limited company Splitter, signal isolaor MODEL: SWP 8034 Brand: Signal conditioner Name: Signal conditioner SWP 8034 BQPS-II - Procurement of ST Debris Flushing MOV (AUMA) PR# FG/894/BQ2 12 EA

3 MOV, 200NM, SQ 10.2, COMM , AUMA "ST Debris B Flushing MOV Type: SQ 10.2 Auma Comm No: Nr: 2616NS70100 Torque: Nm time : 16s / 90 degree Voltage: 400V IP: 68 undefineddebris B Flushing MOV Type: SQ 10.2Auma Comm No: Nr: 2616NS70100Torque: Nm time : 16s / 90 degreevoltage 2 EA BQPS-II - Procurement of Gas Turbine water wash flow switch and WTP level controller PR# FG/895/BQ Controller; Temp, ZISEN OMI,Series V2 Controller; Temp, ZISEN OMI,Series V2 OMI SERIES V2 Object Oriented Intelligence Controller. Model.OMI-100A-X2-2J1-UB24V-50Ω Make. ZISEN technology FLOW SWITCH; PS-5214-U FLOW SWITCH; PS-5214-U GE PART NUMBER: PS-5214-U Model: XTD2-7D00-030/ TEA-A Input: 120 to 240 Vac, 50/60 Hz Output: DPDT Relay Make: Magnetrol (Downers Grove, IL USA) 3 EA 2 EA BQPS-II - Procurement of Hydrogen Plant and Auxiliaries PR# FG/896/BQ PUMP; LYE CYC, TEIKOKU, HYDROGEN PLANT PUMP TYPE: F84-216H4BM-0204SS1-BV-T HEAD: 2.0 m CAPACITY: 1.0 m3/hr PROD. NO: WS NO. 1,9 MANUFACTURER: TEIKOKU" "LYE CIRCULATION

4 FILTER; GAS, HYDROGEN PLANT "GAS FILTER NO. 1.7 KKS: YQJB12 AT 004 SKID MANUFACTURER:SIZHOU JINGLI HYDROGEN PRODUCTION EQUIPMENT CO.LTD (picture of name plate attached)" PUMP; WATER,SHENBEI,JZM-120,HYDROGEN PLT "WATER PUMP S.no A1-2 TYPE: SJ2-M-80/4.0 NO.3.3 FLOW: 80 L/H POWER: 0.75 KW ROW OF PRESSURE: 4.0 Mpa VOLTAGE: 400 V MANUFACTURER: SHANGHAI SHENBEI PUMP" Make: SHANGHAI SHENBEI PUMP DEOXYER; 108X814, HYDROGEN PLANT "DEOXYER NO KKS: YQJB12 AT 001 SKID MANUFACTURER: SIZHOU JINGLI HYDROGEN PRODUCTION EQUIPMENT CO.LTD (picture of name plate attached)" FILTER-CORE;LYE,108X546, HYDROGEN PLANT "LYE FILTER 'CORE/ELEMENT ONLY'. NO KKS: YQJB12 AT 005 SKID MANUFACTURER: SIZHOU JINGLI HYDROGEN PRODUCTION EQUIPMENT CO.LTD (picture of name plate attached)"

5 DRAIN WATER SEAL; HYDROGEN, 108X700 "HYDROGEN DRAIN WATER SEAL NO. 1.8 KKS: YQJB12 AT 005 SKID MANUFACTURER: SIZHOU JINGLI HYDROGEN PRODUCTION EQUIPMENT CO.LTD (picture of name plate attached)" DRYER; 219X2000, HYDROGEN PLANT "DRYER NO. 1.6 KKS: YQJB12 AT 002~3 SKID MANUFACTURER: SIZHOU JINGLI HYDROGEN PRODUCTION EQUIPMENT CO.LTD (picture of name plate attached)" COOLER; 108X918, HYDROGEN PLANT "COOLER NO. 1.5 KKS: YQJB12 AC 001~3 SKID MANUFACTURER: SIZHOU JINGLI HYDROGEN PRODUCTION EQUIPMENT CO.LTD (picture of name plate attached)" SEPARATOR;GAS-WATER,108X310,HYDROGEN PLT "GAS-WATER SEPERATOR NO. 1.4 KKS: YQJB10 AT003~4 SKID MANUFACTURER: SIZHOU JINGLI HYDROGEN PRODUCTION EQUIPMENT CO.LTD (picture of name plate attached)" BQPS-II - SERVICES FOR HYDROJETTING OF ST CONDENSR, ST/GT/NG HEAT EXCHANGERS TUBES/PLATES CLEANING PR# FG/897/BQ2

6 HYDROJETTING OF ST CONDENSER "GENERAL TERMS AND CONDITIONS: 1. CONTRACTOR HAS TO RESPOND WITHIN 24 HOURS OF CALL. 2. CONTRACT ON AS AND WHEN NEEDED BASIS. 3. PAYMENT WILL BE MADE AS PER ACTURAL No. OF TUBES HYDROJETTED. CONTRACTOR#S RESPONSIBILITY: 10 SERVICES 1. ALL TOOLS AND EQUIPMENT TO BE ARRANGED BY CONTRACTOR FOR JOB. 2. DISMANTLING OF END COVERS OF HEAT EXHANGERS & CONDENSER MANHOLES. 3. ALL EQUIPMENTS TO BE CERTIFIED. 1 JOB 4. SCAFFOLDING AND CERTIFIED LIFTING EQUIPMENT WILL BE VENDOR'S RESPONSIBILITY. 5. PPES OF WORKERS TO BE ENSURED BY THE CONTRACTOR AS REQUIRED BY PLANT. 6. ELECTRIC POWER WHEREVER REQUIRED SHALL BE SUPPLIED BY K-ELECTRIC FREE OF COST. TO USE ELECTRICITY THE CONTRACTOR WILL MAKE HIS OWN ARRANGEMENTS OF CABLES, FITTINGS, SWITCHES, CIRCUIT BREAKERS AND FUSES ETC, UNDER THE SUPERVISION OF A ICENSED KE ELECTRICIAN. 7. THE JOB WILL BE CARRIED OUT AS PER INSTRUCTIONS AND GUIDANCE OF MAINTENANCE DEPARTMENT THROUGH ITS AUTHORIZED ENGINEER AND WILL BE COMPLETED TO HIS ENTIRE SATISFACTION. 8. THE CONTRACTOR SHALL SUBMIT WORKING PROCEDURES AND A SCHEDULE OF WORK SHOWING DURATION OF ALL ACTIVITIES TO BE CARRIED OUT AT SITE. THESE PROCEDURES AND SCHEDULE SHALL BE SUBMITTED BEFORE THE COMMENCEMENT OF WORK AND THEIR PPROVAL WILL BE OBTAINED FROM CLIENT AUTHORITIES. THE REPAIR WORK SHALL BE DONE STRICTLY IN ACCORDANCE WITH THE APPROVED PROCEDURES AND SCHEDULE.

7 9. CONTRACTOR SHOULD TAKE CARE OF EXISTING PIPING SYSTEM/EQUIPMENT IN THE ICINITY N CASE OF ANY DAMAGE & SUBSEQUENT LOSS OF ANY PART OR EQUIPMENT, THE ONTRACTOR SHALL BE HELD RESPONSIBLE AND ANY SUCH LOSSES SHALL BE RECOVERED ROM THE CONTRACTOR#S BILL. 10. SAFETY OF THE PERSONNEL EMPLOYED BY THE CONTRACTOR WILL BE RESPONSIBILITY OF THE CONTRACTOR STANDARD SAFE WORKING PRACTICES SHALL BE FOLLOWED 11. SAFETY OF ANY MATERIAL/ EQUIPMENT HANDED OVER TO THE CONTRACTOR FOR THE WORK SHALL BE HIS RESPONSIBILITY. 10. THE QUALITY AND THE QUANTITY OF ALL THE MATERIAL TOOLS AND FIXTURES TO BE USED OR CARRYING OUT THE JOB WHEN BROUGHT ON SITE, SHALL BE CHECKED AND TAGGED BY HE CLIENT 12. PROPER QUALIFIED SITE ENGINEER/SUPERVISOR SHALL HAVE TO BE DEPUTED BY THE CONTRACTOR TO SUPERVISE THE WORK AND COORDINATE ALL SITE ACTIVITIES WITH THE AREA SUPERVISOR OF CLIENT. PROPER SAFETY ENGINEER/SUPERVISOR HAS TO BE DEPUTED BY THE CONTRACTOR TO MONITOR THE SAFETY MEASURES DURING THE JOB. 13. THE FINAL BILL SUBMITTED BY THE CONTRACTOR SHALL ONLY BE CLEARED AFTER THE SATISFACTORILY COMPLETION OF THE ENTIRE WORK. 14. MOBILIZATION AND DEMOBILIZATION MUST BE WITHIN 24 HOURS. 15. ALL THE CONTRACTOR#S TOOLS & EQUIPMENTS MUST BE AT SITE 24 HOURS BEFORE COMMENCEMENT OF WORK FOR INSPECTION AND TAGGING 16. PRE-START WORK MEETING MUST BE DONE WITH THE CLIENT TO UNDERSTAND BETTER WORKSCOPE AND WORK SCHEDULE MUST BE SUBMITTED BY THE CONTRACTOR 17. ANY REASONABLE TERMS/CONDITIONS NOTFORESEEN AT THIS STAGE MAY BE ADDED WHEN THE CASE IS UNDER TECHNICAL EVALUATION. 18. VENDOR TO ENSURE GASKETS OF PLATE TYPE HEAT EXCHANGER DO NOT GET DAMAGED. CLIENT'S RESPONSIBILITY 1. TESTING OF EQUIPMENTS 2. PERMIT FOR WORK 3. ELECTRICAL CONNECTIONS"""

8 HYDROJETTING OF ST CONDENSER "1.1 ST CONDENSER 1.1 WORK SCOPE: 1. CLEANING OF 22,716 TITANIUM TUBES OF STEAM TURBINE CONDENSER (25mm DIA X 10 m LENGTH)" 1 JOB 1.2 HYDROJETTING OF ST CCCW PLATE TYPE HX 1.2 ST CCCW PLATE TYPE HX WORK SCOPE: 1. CLEANING OF HX, DIMENSION 2996X1276X3737 AND 163 NO. OF PLATES. 2 JOB HYDROJETTING OF GT CCCW PLATE TYPE HX PLATE TYPE HX "1.2 GT CCCW 1.3 WORK SCOPE: 1. CLEANING OF HX, DIMENSION 2171X877X1784 AND 199 NO. OF PLATES." 3 JOB NG CCCW PLATE TYPE HX PLATE TYPE HX "1.3 NG CCCW 1.4 WORK SCOPE: 1. CLEANING OF HX, DIMENSION 2996X1276X4237 AND 163 NO. OF PLATES." 2 JOB BQPS-II - Procurement of Spares of Auma Actuators PR# FG/898/BQ2 BOX; WORM GEAR, GS , AUMA 200.3, Auma "Worm Gear Box, GS ACW Interconnection MOV Gear Box, Type: GS (Part turn gearbox with primary reduction gearings) Gear Ratio: 864:1 Valve attachment : F35 Y Input flange : F10 Coupling type : Steel Max. output torque : Nm. Max. input torque : 131 Nm. Comm. No:

9 BOX; WORM GEAR, GS , AUMA 250.3, Auma "Worm Gear Box, GS Condenser Inlet MOV Gear Box, Type: GS (Part turn gearbox with primary reduction gearings) Gear Ratio: 848:1 Valve attachment : F40 Y Input flange : F14 Coupling type : Steel Max. output torque: 56000Nm Max. input torque: 213Nm Comm. No: BOX; BEVEL GEAR, GK. 30.2, DRIVE AF, AUM 30.2, Auma "Bevel Gear Box, GK HRSG HP Main Steam Outlet MOV Gear Box, Type: GK. 30.2, Reduction ratio 8:1 Valve attachment: F30 Input flange: F14 Max. output torque: 4000Nm Max. input torque: 556 Nm Output drive type AF-Unboured (Spring Loaded) Comm. No: BOX; WORM GEAR, GS , AUMA GS , Auma "Worm Gear Box, ACW Filter Outlet MOV Gear Box Type: GS (Part turn gearbox with primary reduction gearings) Gear Ratio: 442:1 Valve attachment : F25 Y Input flange : F10 Coupling type : Steel Max. output torque : 17500Nm. Max. input torque : 131 Nm. Comm. No:

10 BOX; BEVEL GEAR, GK. 35.2, AUMA 35.2, Auma "Bevel Gear Box, GK ST Main Steam MOV Gear Box Type: GK Reduction ratio 11:1 Explosion protection: M020 Valve attachment: F35 Input flange: F16 Max. output torque: 8000Nm Max. input torque: 808 Nm Output drive type: AF-Unboured (Spring Loaded) Comm. No BOX; BEVEL GEAR, GK. 25.2, AUMA GK. 25.2, Auma "Bevel Gear Box, HRSG HP FWP Discharge MOV Gear Box Type: GK Reduction ratio 8:1 Valve attachment: F25 Input flange: F14 Max. output torque: 2000Nm Max. input torque: 278 Nm Output Drive Type A-Unboard Comm. No: BOX; BEVEL GEAR, GK. 30.2, DRIVE A, AUMA 30.2, Auma "Bevel Gear Box, GK HRSG HP Main Steam Latching MOV Gear Box Type: GK30.2(8:1) Reduction ratio 8:1 Valve attachment: F30 Input flange: F14 Max. output torque: 4000Nm Max. input torque: 556 Nm Output drive type: A-Unboured Comm. No: BQPS-II - Procurement of Chemical Titan PR# FG/900/BQ2

11 Titan ASD 200 SC Titan ASD 200 SC Make; Local ANTISCALENT; FOR R.O. MEMBRANES Type: TITAN ASD 200 SC Density: KG/ C Appearance: Transparent Clear Liquid PH: 2.0 C, completely Solubility. BQPS-II - Procurement of CITRIC ACID; ANHYDROUS (LAB GRADE) PR# FG/901/BQ2 109 KG CITRIC ACID; ANHYDROUS (LAB GRADE) Packaging in 20 to 50 kg drums Make Tiwan, Korea Citric Acid UF Cleaning Chemical Citric Acid Monohydrate Make: COFCO Biochemical (Thailand) Co. Ltd. BQPS-II - Procurement of Vacuum cleaner PR# FG/902/BQ2 600 KG CLEANER; VACUUM,4KW INDUSTRIAL,WET & DRY Cleaner, Wet and Dry, 4KW, "Industrial Vacuum Volts 50Hz, Vacuum: 2900mmH2O, Capacity: 80L, Inlet 50mm, Suction Hose Length: 100Ft. Make: Dongguan Vito Machiney and Equipment, Model: Model : TWD" 6 EA BQPS-II - Procurement of Vibration Meter PR# FG/903/BQ METER; VIBRATION, FLUKE 805 "Vibration Meter Model: Fluke 805 Measurement range: 0.01 g to 50 g Sensitivity: 100 mv g ± 10% Low frequency range: 10 to 1,000 Hz High frequency range: 4,000 to 20,000 Hz Thermometer Temp Range: -20 C to 200 C Audio Output Option IP Rating: IP54 Make: Fluke" 2 EA BQPS-II - Procurement of HRSG and ST piping insulation material PR# FG/904/BQ2

12 CLADDING; AL SHEET,1Mx56Mx1MM "CLADDING;ALUMINIUM SHEET,1MX56MX1MM For insulation jacketing Size:1000MM Wide,thick 1MM 56Meters/Roll Material: Aluminium coil alloy 1060,H14" For insulation jacketing 1Mx56MX1mm Alloy 1060 H14 20 EA PLATE; 8'x4',THICKNESS2MM, SS410 PLATE;8FTX4FT,THICKNESS=2MM,SS EA INSULATION; ROCKWOOL,THICKNESS 80MM "INSULATION; ROCKWOOL,THICKNESS 80MM Material:Rockwool with GI wire mesh Hexagonal Triple twist mesh Density: kg/M3 Max service temperature:650c Flame, Rot and Tear Resistant Length:5 meter/roll thickness:80mm width:1000mm" Material:Rockwool Density: kg/M3 T conductivity at 300C Max service temperature:650c Length:5 meter thickness:80 mm width:1000mm 40 EA INSULATION; AL SILICATE FIBER,80MM THICK "INSULATION; AL SILICATE FIBER,80MM THICK Material:Aluminium silicate Fiber Maximunm working temperature:1260 C Density:96-128Kg/m3 Width:1000mm Length:5Meter/Roll Thickness:80mm " Material:Aluminium silicate fiber Density:96-128kg/M3 Thermal conductivity at 400C 0.09 Max service temperature:1260c Length:5 meter thickness:80 mm width:1000mm 40 EA

13 Please quote with weight & dimension of each items: Payment Term: Delivery Period: Warranty Period: Validation: 120 Days Incoterm: Ex-works/ FOB / CFR Karachi / FOR Plant Site QUOTATION WILL NOT BE ACCEPTED AFTER THE GIVEN DEAD LINE DATE Tender document containing detailed scope of work, terms and conditions may be obtained on payment of tender fee (nonrefundable) from the undersigned. KE reserves the right to reject any or all the bids and to annul the bidding process at any time without thereby incurring any liability to the affected bidder(s) or any obligation to inform the affected bidder(s). Note: Quote with the reference of the RFQ serial number and men on specs accordingly Detailed relevant Technical literature (English) must be submi ed with bid. Quote original make & origin of all above items. Incomplete quota ons shall not be considered for technical evalua on. Vendors interested to par cipate in the aforesaid tender may obtain RFQ by purchasing the tender document from 1st Floor OTB Building, Elander Road, Procurement Division. Deputy General Manager (Procurement Supply Chain) shahid.soomro@ke.com.pk