TENDER NOTICE. Collection of Tenders as follows : Monday - 09:00 AM to 03:00 PM Friday - 09:00 AM to 02:00 PM

Transcription

1 TENDER NOTICE K-Electric is Pakistan s only vertically-integrated power utility that generates, transmits and distributes energy to more than 2.5 million consumers across Karachi and its outskirts. The company invites sealed tenders for procurement / supply as per details given below; Collection of Tenders as follows : Monday - 09:00 AM to 03:00 PM Friday - 09:00 AM to 02:00 PM PROCUREMENT OF SPARES FOR BFP FLUID COUPLING, UNIT 06, BQPS-I PR# , FG0983/BQ1, Tender Cost Rs. 2000/- To Be Opened on PLUG; FUSE FOR BFP F/C P#010/040, U# Fusible Plug for BFP Fluid Coupling, Unit # 06, BQPS1. Part No. 010/040, No. TCR , Size & Material: M12 x Degree Celsius 10.9, Fluid Coupling (Voith Geared Variable Speed Coupling) Type: R15K.2, RING; SEAL FOR BFP F/C P#010/050, U# Seal Ring for Fusible Plug of BFP Fluid Coupling, Unit # 06, BQPS1. Part No. 010/050, No. TCR , Size & Material: A12 x 18 Aluminium, Fluid Coupling (Voith Geared Variable Speed Coupling) Type: R15K.2, ELEMENT; FILTER F/C P#369/060/010, U# Star Filter Element for BFP Fluid Coupling, Unit # 06, BQPS1. Part No. 369/060/010, No. TCR , Size & Material: 35MY VSF50, Fluid Coupling (Voith Geared Variable Speed Coupling) Type: R15K.2, SCREW; WEIGHT TOL F/C P#011/010/050 U# Weight Tol Screw of BFP Fluid Coupling, Unit # 06, BQPS1. Part No. 011/010/050, No. TCR , Size & Material: M12x , Fluid Coupling (Voith Geared Variable Speed Coupling) Type: R15K.2, SPRING; CYL. COMPRES F/C P#089/280, U#06 Cylindrical Compression Spring of BFP Fluid Coupling, Unit # 06, BQPS1. Part No. 089/280, No. TCR , Size & Material: 5.5x27x263, Fluid SPRING; CYL. COMPRES F/C P#130/050, U# Cylindrical Compression Spring of BFP Fluid Coupling, Unit # 06, BQPS1. Part No. 130/050, No. TCR , Size & Material: 3x30x98, Fluid

2 SPRING; CYL. COMPRES F/C P#130/160, U# Cylindrical Compression Spring of BFP Fluid Coupling, Unit # 06, BQPS1. Part No. 130/160, No. TCR , Size & Material: 5x30x92, Fluid CIRCLIP; FOR BFP F/C P#149/170, U# Circlip of BFP Fluid Coupling, Unit # 06, BQPS1. Part No. 149/170, No. TCR , Size & Material: 55x2 FED. ST., Fluid NUT; SLOTTED FOR BFP F/C P#149/270, U# Slotted Nut of BFP Fluid Coupling, Unit # 06, BQPS1. Part No. 149/270, No. TCR , Size & Material: M20x1.5 W, Fluid PIN; ROLL FOR BPF F/C P#149/280, U# Roll Pin of BFP Fluid Coupling, Unit # 06, BQPS1. Part No. 149/280, No. TCR , Size & Material: 3x8 FED. ST., Fluid Coupling (Voith Geared Variable Speed Coupling) Type: R15K.2, Make: Voith Turbo, Germany. PIN; ROLL FOR BPF F/C P#050/055, U# Roll Pin of BFP Fluid Coupling, Unit # 06, BQPS1. Part No. 050/055, No. TCR , Size & Material: 10x16 FED. ST., Fluid Coupling (Voith Geared Variable Speed Coupling) Type: R15K.2, Make: Voith Turbo, Germany PIN; STRAIGHT FOR BFP F/C P#050/060 U#06 Straight Pin of BFP Fluid Coupling, Unit # 06, BQPS1. Part No. 050/060, No. TCR , Size & Material: 10M6x20 STAHL, Fluid Coupling (Voith Geared Variable Speed Coupling) Type: R15K.2, SPRING; CYL. COMP F/C P#280/190/040 U# Cylindrical Compression Spring of BFP Fluid Coupling, Unit # 06, BQPS1. Part No. 280/190/040, No. TCR , Size & Material: 5x30x92, Fluid SPRING; CYL. COMPRES F/C P#369/050, U# Compression Spring of BFP Fluid Coupling, Unit # 06, BQPS1. Part No. 369/050, No. TCR , Size & Material: 3.6x32x5.5x48, Fluid

3 SPRING; CYL. COMPRES F/C P#369/120, U# Compression Spring of BFP Fluid Coupling, Unit # 06, BQPS1. Part No. 369/120, No. TCR , Size & Material: 2x16x68, Fluid SPRING; CYL. COMPR F/C TCR , U# Cylindrical Compression Spring of BFP Fluid Coupling, Unit # 06, BQPS1. No. TCR , Size & Material: 0.5x7x12x40, Fluid Coupling (Voith Geared Variable Speed Coupling) Type: R15K.2, Serial Number: ~ WASHER; FOR BFP F/C TCR , U#06 8 EA Washer of BFP Fluid Coupling, Unit # 06, BQPS1. No. TCR , Size & Material: 5.5 STAHL, Fluid Coupling (Voith Geared Variable Speed Coupling) Type: R15K.2, Serial Number: ~ WASHER; FOR BFP F/C TCR , U#06 8 EA Washer of BFP Fluid Coupling, Unit # 06, BQPS1. No. TCR , Size & Material: 7.5/5.5Dx1.5 9SMN28 K, Fluid Number: ~ ELEMENTS; SEALING BFP F/C TCR U6 16 EA Sealing Elements of BFP Fluid Coupling, Unit # 06, BQPS1. No. TCR , Size & Material: R15K.2 BGR., Fluid Number: ~ TAPE; SEALING BFP F/C , U# Sealing Tape of BFP Fluid Coupling, Unit # 06, BQPS1. No , Size & Material: 3.0X0.7 PTFE, Fluid Number: ~ RING; FLAT SEAL F/C, TCR , U# Flat Seal Ring of BFP Fluid Coupling, Unit # 06, BQPS1. No. TCR , Size & Material: 65PN40 FA-A1-0, Fluid Number: ~ RING; SEAL FOR BFP F/C TCR , U#06 3 EA Seal Ring of BFP Fluid Coupling, Unit # 06, BQPS1. No. TCR , Size & Material: A14x20 ALUMINIUM, Fluid Number: ~ SEAL; FOR BFP F/C, TCR , U#06 8 EA Seal of BFP Fluid Coupling, Unit # 06, BQPS1. No. TCR , Size & Material: 4KT.35/19Dx2 AF6 VN1641 AF6, Fluid 6 EA

4 SEAL; FOR BFP F/C, P#7/11/13/14/16, U# Seals of BFP Fluid Coupling Working Oil Cooler, Unit # 06, BQPS1. Part No. 7/11/13/14/16, No. TCR , Size & Material: 250/1 RDR8 L2N2 NBR, Fluid Coupling (Voith Geared Variable Speed Coupling) Type: R15K.2, SEAL; FOR BFP F/C, TCR , U# Seals of BFP Fluid Coupling Lube Oil Cooler, Unit # 06, BQPS1. Part No. 7/11/13/14/16, No. TCR , Size & Material: 200/2 RDR8 L1N1 NBR, Fluid Coupling (Voith Geared Variable Speed Coupling) Type: R15K.2, BUSH; BEARING P#.149/220 FOR MOP DETAILED SPECIFICATION OF BEARING BUSH FOR M.O.P FOR FLUID COUPLING UNIT NO.5: ASSEMBLY DRAWING NO: Q ( ) SPECIFICATION OF FLUID COUPLING: TYPE: R15K.1 (VARIABLE TURBO COUPLING) MAKE: VOITH TURBO. GMBH & CO. SERIAL NO: BEARING; PLAIN BFP F/C P#250/060/060 U# Plain Bearing of BFP Fluid Coupling Auxiliary Oil Pump (AOP), Unit # 06, BQPS1. Part No. 250/060/060, No , Size & Material: 65X32X40,8 siehe Materialstamm, Fluid Coupling (Voith Geared Variable Speed Coupling) Type: R15K.2, PLAIN BEARING INPUT; P#.250/60/70 (AOP) DETAILED SPECIFICATION OF PLAIN BEARING INPUT FOR A.O.P FOR FLUID COUPLING UNIT NO.5: ASSEMBLY DRAWING NO: Q ( ) SPECIFICATION OF FLUID COUPLING: TYPE: R15K.1 (VARIABLE TURBO COUPLING) MAKE: VOITH TURBO. GMBH & CO. SERIAL NO: BEARING; PLAIN BFP F/C P#250/060/080 U# Plain Bearing of BFP Fluid Coupling Auxiliary Oil Pump (AOP), Unit # 06, BQPS1. Part No. 250/060/080, No , Size & Material: 65X32X40,8 siehe Materialstamm, Fluid Coupling (Voith Geared Variable Speed Coupling) Type: R15K.2, BEARING; PLAIN BFP F/C P#250/060/090 U# Plain Bearing of BFP Fluid Coupling Auxiliary Oil Pump (AOP), Unit # 06, BQPS1. Part No. 250/060/090, No , Size & Material: 65X32X40,8 siehe Materialstamm, Fluid Coupling (Voith Geared Variable Speed Coupling) Type: R15K.2,

5 PROCUREMENT OF EXTENDED SHAFT GLAND STEAM EXHAUSTER MOTOR FOR U#5&6, BQPS-01 PR# , FG0986/BQ1, Tender Cost Rs. 2000/- To Be Opened on MOTOR; GLAND STEAM EXHAUSTER BLOWER Product: TEFC, 3-phase, squirrel cage induction motor with Extended Shaft. Product Code: 3GBP ADK. 3.Type/Frame: M3BP 132 SMG 2.Mounting: IM1001, B3(foot). Rated output PN: 7.5 kw Service Factor : 1 Voltage: 400 Volts, 3 phase, 50 Hz Amp. : 13.2 A Speed: 2910 RPM Insulation Class: F Duty Cycle: Continuous duty (40 C ambient temp.) Enclosure : IP65 Shaft: Extended shaft motor OEM : ABB Quantity reqd. 02 No. Drawing: ABB Dimensional drawing is attached for reference. SERVICES REQUIRED FOR THE INSPECTION OF DEG#4 AT BQPS-1 PR# , FG0980/BQ1, Tender Cost Rs. 2000/- To Be Opened on SR. # KE MATERIAL CODE ITEM DESCRIPTION SERVICES REQUIRED FOR THE INSPECTION OF QTY UNIT DEG#4 AT BQPS-1 SPECIFICATIONS MAKE: MIRRLESS BLACKSTONE MODEL: ESLMK2 ENGINE: 89LESL 12 1 SCOPE OF WORK 1. THE OEM WILL ARRANGE TO CARRY OUT A THOROUGH INSPECTION OF DEG4 AND WILL SUBMIT A COMPREHENSIVE AND DETAILED REPORT REGARDING DEG HEALTH. 2. REPORT WILL FURTHER RECOMMEND WHETHER ANY MAINTENANCE WORK IS NEEDED. 3. IN CASE MAINTENANCE WORK REQUIRED, THEN ITS COMPLETE QUOTATION INCLUDING SERVICES AND SPARES WILL BE SUBMITTED. 4. THE REPORT OF INSPECTION PERFORMED WILL BE SUBMITTED WITHIN 2-4 DAYS. 5. OEM ADDRESS IS AS UNDER: 1 AU MAN DIESEL & TURBO PAKISTAN (PVT) LTD. 16-KM RAIWIND ROAD, LAHORE ASGHAR.ALI@PK.MAN.EU TEL # EXT 108 MOBILE PROCUREMENT OF PARTICLE COUNTER FOR LABORATORY AT BQPS-I PR# , FG0982/BQ1, Tender Cost Rs. 2000/- To Be Opened on

6 AVCOUNT; LUBE PARTICLE COUNTER Make: Stanhope-SETA, UK Product Reference: SA Test Methods: Programmable Particle Size Range: ISO 4402, 2#m to greater than 1000#m Measuring Channels: 15 programmable size channels Max concentration (max): particles Coincidence Error Limit: less than 5% at Sample Viscosity (max): 200mm2/s Sample Temperature Range: 0 to 70 C Voltage / Power: Automatic Particle Counter: 12 Vdc, 1A (mains adaptor supplied 100 to 240 Vac, 50/60Hz, 650mA) Sample Delivery System: 24 Vdc, 2A (mains adaptor supplied 100 to 240 Vac, 50/60Hz, 1A) Size (HxWxD) / Weight: 50 x 32 x 22cm / 16kg Method Compliance: DEF STAN , ASTM D975, IP 565, ASTM D7619, NAS 1638, SAE AS4059E, GJB /420-A-1996/420B-2006, DEF STAN 91-86, ASTM D7647, ISO 60970, ISO 11171, ISO 11500, ISO 4406, AS 4059 Note: Item should be supplied with ProTrend Software, A PC for full support opeartion of software & all related accessories, suggested/optional spares & Calibration/Verification material. PROCUREMENT OF EQUIPMENT FOR LABORATORY, BQPS-1 PR# , FG0985/BQ1, Tender Cost Rs. 2000/- To Be Opened on CALIBRATION WEIGHTS Standard Weights for Calibration of Analytical Balance Range: 1mg - 200g VISCOMETER; 9721-B62 Make: Cannon Feneske Type: U-Tube Order No.: 9721-B62 Size: 150 Approximate Constant: mm2/s2 Viscosity Range: mm2/s VISCOMETER; 9721-B65 Make: Cannon Feneske Type: U-Tube Order No.: 9721-B65 Size: 200 Approximate Constant: 0.1 mm2/s2 Viscosity Range: mm2/s VISCOMETER; 9721-B68 Make: Cannon Feneske Type: U-Tube Order No.: 9721-B68 Size: 300 Approximate Constant: 0.25 mm2/s2 Viscosity Range: mm2/s VISCOMETER; 9721-B71 Make: Cannon Feneske Type: U-Tube Order No.: 9721-B71 Size: 350 Approximate Constant: 0.5 mm2/s2 Viscosity Range: mm2/s VISCOMETER; 9724-G62 Make: Cannon Feneske Type: U-Tube Order No.: 9724-G62 Size: 5 Approximate Constant: 0.3 mm2/s2 Viscosity Range: mm2/s VISCOMETER; 9724-G65 Make: Cannon Feneske Type: U-Tube Order No.: 9724-G65 Size: 6 Approximate Constant: 1.0 mm2/s2 Viscosity Range: mm2/s2

7 PROCUREMENT OF FERRIC CHOLORIDE DOSING PUMP FOR UNIT#3/4, BQPS-1 PR# , FG0984/BQ1, Tender Cost Rs. 2000/- To Be Opened on PUMP; TYPE: R411 KM-56S/12, WITH MOTOR NAME: FERRIC CHLORIDE DOSING PUMP COMPLETE WITH MOTOR NOMINAL FLOW: I/H MAXIMUM PERMISSIBLE PRESSURE AT PUMP OUTLET: 12 BAR PERMISSIBLE PRESSURE AT PUMP INLET: -0.2/ 0BAR MAXIMUM SUCTION HEAD: 2 M WS NOMINAL WIDTH: 8 MM SUCTION AND DISCHARGE END CONNECTION: LOOSE FLANGE NO. OF STROKES: 84 / MIN. LIFT OF STROKE: 13 MM VALVE TYPE: BOLL RATED POWER: 0.37 KW VOLTAGE: 220/380 VOLT FREQUENCY: 50 Hz RATED AMPERE: 2.25/1.3 AMPERE Z-NR: SK 8718 MAKE: M/s. SAYBERT & RAHIER GMBH + CO. KG 3 EA PROCUREMENT OF SPARES FOR TURBINE EMERGENCY BEARING OIL PUMP, UNIT # 01-02, BQPS1. PR# , FG0977/BQ1, Tender Cost Rs. 2000/- To Be Opened on IMPELLER; FOR TURBINE EBOP, P#7, U# Impeller for Turbine Emergency Bearing Oil Pump, Unit # 01-02, BQPS1. Part # 07, Material = Bronze Casting (JIS=BC3), Drawing No. 10P , Make: Hitachi, Ltd. Japan SHAFT; FOR TURBINE EBOP, P#13, U#01-02 Shaft for Turbine Emergency Bearing Oil Pump, Unit # 01-02, BQPS1. Shaft for EBOP, Part # 13, Material = Carbon Steel (JIS=S35C), Drawing No. 10P , Make: Hitachi, Ltd. Japan. PROCUREMENT OF SPARES FOR TURBINE AUXILIARY OIL PUMP AND TURNING GEAR OIL PUMP, UNIT # 01-02, BQPS1. PR# , FG0978/BQ1, Tender Cost Rs. 2000/- To Be Opened on RING; MOUTH FOR TURBINE AOP P#6, U# Mouth Ring for Turbine Auxiliary Oil Pump, Unit # 01-02, BQPS1. Part # 6, Material = Leaded Bronze Casting (LBC4), Drawing No. 10P , Make: Hitachi, Japan RING; MOUTH FOR TURBINE AOP P#7, U#01-02 Mouth Ring for Turbine Auxiliary Oil Pump, Unit # 01-02, BQPS1. Part # 7, Material = Leaded Bronze Casting (LBC4), Drawing No. 10P , Make: Hitachi, Japan RING; MOUTH FOR TURBINE TGOP P#5 U#01-02 Mouth Ring for Turbine Turning Gear Oil Pump, Unit # 01-02, BQPS1. Part # 5, Material = Leaded Bronze Casting (BC2), Drawing No. 10P , Make: Hitachi, Japan PROCUREMENT OF TURBINE SUPERVISORY INSTRUMENTS FOR U-1, 2, 5 & 6 BQPS-1 PR# , FG0979/BQ1, Tender Cost Rs. 2000/- To Be Opened on

8 PROBE; FOR DETECTOR, LLR55-19,L=600MM NAME: PROBE FOR SHAFT VIBRATION DETECTOR TYPE: LLR55-19 LENGTH: 600MM FULL SCALE RATING: 0-0.3MM P.P SENSITIVITY: 0-19V/cm s TEMPERATURE: 150 DEGREE CELSIUS (MAX.) PEAK ACCELERATION: 2.7G (MAX.) INSTALLATION PLACE: BEARING # 1 MAKE: HITACHI HIGH-TECH CONTROL SYSTEMS CORPORATION COUNTRY OF ORIGIN: JAPAN PROBE; FOR DETECTOR, LLR55-11,L=700MM NAME: PROBE FOR SHAFT VIBRATION DETECTOR TYPE: LLR55-11 LENGTH: 700MM FULL SCALE RATING: 0-0.3MM P.P SENSITIVITY: 0-19V/cm s TEMPERATURE: 150 DEGREE CENTIGRADE (MAX.) PEAK ACCELERATION: 2.7G (MAX.) INSTALLATION PLACE: BEARING # 2 MAKE: HITACHI HIGH-TECH CONTROL SYSTEMS CORPORATION COUNTRY OF ORIGIN: JAPAN PROBE; FOR DETECTOR, LLR55-7, L=500MM NAME: PROBE FOR SHAFT VIBRATION DETECTOR TYPE: LLR55-7 LENGTH: 500MM FULL SCALE RATING: 0-0.3MM P.P SENSITIVITY: 0-19V/cm s TEMPERATURE:150 DEGREE CENTIGRADE (MAX.) PEAK ACCELERATION:2.7G (MAX.) INSTALLATION PLACE: BEARING # 3 MAKE: HITACHI HIGH-TECH CONTROL SYSTEMS CORPORATION COUNTRY OF ORIGIN: JAPAN PROBE; FOR DETECTOR, LLR 55-6L=445MM NAME: PROBE FOR SHAFT VIBRATION DETECTOR TYPE: LLR55-6 LENGTH: 445MM FULL SCALE RATING: 0-0.3MM P.P SENSITIVITY: 0-19V/cm s TEMPERATURE: 150 DEGREE CENTIGRADE PEAK ACCELERATION: 2.7G INSTALLATION PLACE: BEARING # 4, 5, 6 MAKE: HITACHI HIGH-TECH CONTROL SYSTEMS CORPORATION COUNTRY OF ORIGIN: JAPAN TRANSDUCER; TYPE: LLR 55, LENGTH: 395MM 4 EA NAME: VIBRATION DETECTOR TRANSDUCER FOR BEARING SHAFT VIBRATION DETECTOR CASE COLOUR: 7.5 BG5/1.5 FULL SCALE RATING: 0 ~ 0.3 MM P.P SENSITIVITY: 0 ~ 19 V/CM S TEMPERATURE: 150 C PEAK ACCELERATION: 2.7 G MAKE: INSTRUMENT DIVISION, HITACHI, JAPAN 4 EA

9 TRANSDUCER; TYPE: LLR55-M, LENGTH: 395M NAME: VIBRATION DETECTOR TRANSDUCER FOR VERTICAL OR HORIZONTAL TYPE: LLR55-M INSTALLATIOIN PLACE: BEARING # 1-7 HITACHI REFERENCE DRAWING NO.: 4G MAKE: HITACHI HIGH-TECH CONTROL SYSTEMS CORPORATION COUNTRY OF ORIGIN: JAPAN 6 EA PROCUREMENT OF I&C SPARES FOR DEGS, BQPS-I PR# , FG0987/BQ1, Tender Cost Rs. 2000/- To Be Opened on VALVE; SOLENOID W/MANUAL OVER RIDE DEG NAME: SOLENOID VALVE WITH MANUAL OVER RIDE DEG 5 PART NO.: 7C8265 FOR CATERPILLAR DIESEL GENERATOR PORT: 1/4 CONNECTION, FEMALE PRESSURE: UPTO 30 BAR COIL VOLTAGE: 24 VDC PROTECTION: IP65 ALONG WITH: MANUAL OVER RIDE COIL FEMALE CONNECTION REGULATOR; AIR 3/8", 0~30BAR FOR DEG NAME: AIR REGULATOR FOR DEG 1 AND 2 CONNECTION SIZE: 3/8" INPUT PRESSURE: 30 BAR OUTPUT PRESSURE: 0 ~ 30 BAR ADJUSTABLE FILTER: METALLIC ALONGWITH: INLET AND OUTLET PRESSURE GAUGES MAKE: TANAKA OR EQUIVALENT INDICATOR; PRESSURE DIGITAL DEG 5 4 EA NAME: PRESSURE DIGITAL INDICATOR DEG 5 PART NO.: 4W0506 MODEL: LMD-120A CONNECTION: TWO WIRE POWER SUPPLY: LOOP POWERED INPUT RANGE: 4 ~ 20 ma DIAL SIZE: 4 INCH MOUNTING: PANEL MOUNTING MAKE: DYNALCO CONTROLS COUNTRY OF ORIGIN: USA HIRING THE SERVICES OF LOCAL QUALIFIED CONTRACTOR/COMPANY FOR TURBINE PR# , FG0981/BQ1, Tender Cost Rs. 2000/- To Be Opened on HIRING THE SERVICES OF LOCAL QUALIFIED CONTRACTOR/COMPANY FOR TURBINE CONTROL VALVE # 01 & 03 BODY SEATS REPLACEMENT AND NOZZLE BOX SLIDING KEY REPLACEMENT, UNIT # 04, BQPS1. 49 Day

10 MOBILIZATION/DEMOBILIZATION SCOPE OF WORK: - CROSS OVER PIPE DISMANTLING - HIP OUTER DISMANTLING WORK. - HP & IP INNER CASING DISMANTLING WORK. - NOZZLE BOX DISMANTLING WORK. - DISMANTLING OF CV1 & 3. - REMOVAL OF BODY SEATS FROM HIP CASING. - PREPARATION OF BODY SEATS FEMALE PART. - INSTALLATION/WELDING OF BODY SEATS. - ASSEMBLY IN REVERSE ORDER. 1 SPECIFICATION OF STEAM TURBINE: TURBINE TYPE: TCDF-26, STEAM TURBINE RATING: 210 MW NUMBER OF STAGES: 22 STAGES MANUFACTURER: ANSALDO, ITALY. - THE WORK WILL BE CARRIED OUT UNDER THE SUPERVISION OF SPECIALIST FROM M/S. ANSALDO, ITALY & KE ENGINEERS. - THE WORK WILL BE CARRIED OUT 24 HRS IN 02 SHIFTS DAILY WITH FULL STRENGTH OF HIGHLY SKILLED EXPERIENCED AND QUALIFIED WORKERS UP TO THE ENTIRE SATISFACTION OF M/S. ANSALDO AND KE ENGINEERS. - ALL SPECIAL TOOLS RELATED TO SUBJECT JOB WILL BE PROVIDED BY KE AND ALL OTHER GENERAL TOOLS / CONSUMABLE AS PER PROVIDED LIST WILL BE RESPONSIBILITY OF VENDOR. - ALL MATERIAL RELATED TO INSULATION, CLADDING ETC WILL BE RESPONSIBILITY OF KE. - ELECTRIC POWER, WATER AND SERVICE AIR WHEREVER REQUIRED, SHALL BE SUPPLY BY KE. TO USE ELECTRICITY, THE CONTRACTOR WILL MAKE HIS OWN ARRANGEMENTS OF CABLES, FITTINGS, SWITCHES, CIRCUIT BREAKERS AND FUSES, SPECTACLES ETC. UNDER THE SUPERVISION OF LICENSED ELECTRICIAN. - OVERHEAD CRANES WILL BE PROVIDED BY KE IN GOOD WORKING CONDITION. CONTRACTOR IS RESPONSIBLE FOR MAINTAINING ITS SOUND CONDITION. CONTRACTOR WILL ARRANGE SKILLED CRANE OPERATOR IN EACH SHIFT. - THE JOB WILL BE CARRIED OUT AS PER INSTRUCTIONS AND GUIDANCE OF GM MECHANICAL MAINTENANCE OR HIS AUTHORIZED ENGINEER AND WILL BE COMPLETED TO HIS ENTIRE SATISFACTION. - THE CONTRACTOR SHALL SUBMIT WORKING PROCEDURES AND SCHEDULE OF WORKS SHOWING DURATION OF ALL ACTIVITIES TO BE CARRIED OUT AT SITE. THESE PROCEDURES AND SCHEDULE SHALL BE SUBMITTED BEFORE THE COMMENCEMENT OF WORK AND THEIR APPROVAL WILL BE OBTAINED FROM BQPS1 AUTHORITIES. - THE PROCESS OF WORK SHALL BE CHECKED ON DAY-TO-DAY BASIS AS PER WORK SCHEDULE SUBMITTED BY THE CONTRACTOR. - CONTRACTOR SHALL SUBMIT DAILY PROGRESS REPORT (HARD AND SOFT COPIES) EVERY MORNING BEFORE DAILY MEETING. - CONTRACTOR SHOULD TAKE CARE OF EXISTING PIPING SYSTEM/EQUIPMENTS IN THE VICINITY OF TURBINE. IN CASE OF ANY DAMAGE(S) & SUBSEQUENT LOSS TO ANY PART OF EQUIPMENT, THE CONTRACTOR SHALL BE HELD RESPONSIBLE AND ANY SUCH LOSSES SHALL BE RECOVERED FROM THE CONTRACTOR'S BILL.

11 - CONTRACTOR WILL ARRANGE PROPER QUALIFIED AND EXPERIENCED SAFETY PERSONNEL IN EACH SHIFT, IN ORDER TO MONITOR STANDARD SAFETY PROCEDURES. - PROPERLY QUALIFIED SITE ENGINEER / SUPERVISOR IN BOTH SHIFTS HAVE TO BE DEPUTED BY THE CONTRACTOR TO SUPERVISE THE WORK AND COORDINATE ALL SITE ACTIVITIES WITH THE CONCERNED ENGINEER OF KE. - AFTER INTIMATION OF WORK START MANPOWER SHOULD BE ARRANGE WITHIN 03 DAYS. - THE FINAL BILL/INVOICE SUBMITTED BY THE CONTRACTOR SHALL ONLY BE CLEARED AFTER THE SATISFACTORY COMPLETION OF THE ENTIRE WORK. - OBTAINING THE SECURITY PERMISSION FROM KE SECURITY DEPARTMENT SHALL BE THE CONTRACTOR'S RESPONSIBILITY. - KE ENGINEERS WILL VET CREDENTIAL OF MILL WRIGHT, FITTERS, WELDERS, FABRICATORS, RIGGERS AND OTHER WORKERS ENGAGED. - CLEANING /HOUSEKEEPING OF ADJACENT AREA WILL BE RESPONSIBILITY OF CONTRACTOR.. - THE CONTRACTOR SHALL BE SOLELY RESPONSIBLE FOR ALL DISCIPLINARY MATTERS REGARDING THE MAN-POWER DEPUTED BY THEM FOR THE EXECUTION OF THE SUBJECT WORKS AND SHALL BEAR ALL THE DAMAGE / LOSSES INCURRED BY KE OR OTHERS DUE TO NEGLIGENCE / MISCONDUCT OF THEIR MANPOWER. FURTHER THE CONTRACTOR WILL BE LIABLE TO PAY AT ACTUAL THE AMOUNT CLAIMED BY THE USER DEPARTMENT OF KE TOWARDS LOSSES/DAMAGES TO MEN/MATERIAL/PROPERTY OF KE BY THEIR MANPOWER. IN CASE OF FAILURE OF THE CONTRACTOR TO PAY THE AMOUNT CLAIMED BY USER DEPARTMENT OF KE, THE SAME SHALL BE DEDUCTED AUTOMATICALLY FROM THE CONTRACTOR'S BILL, SECURITY DEPOSIT, PERFORMANCE BOND OR ANY OTHER AMOUNT PAYABLE TO THEM BY KE ON ANY ACCOUNT. - ALL PPE'S WILL BE RESPONSIBILITY OF VENDOR. - ANY OTHER WORK WHICH IS NOT INCLUDED IN THE SCOPE OF WORK BUT IS REASONABLY NECESSARY TO COMPLETE THE JOB IS ASSUMED TO BE INCLUDED IN TO THE SCOPE OF WORK. - JOB COMPLETION PERIOD: 31 DAYS. NOTE: THE PAYMENT WILL BE MADE ON ACTUAL WORK COMPLETION PER JOB BASIS.

12 - THE CONTRACTOR SHALL BE SOLELY RESPONSIBLE FOR ALL DISCIPLINARY MATTERS REGARDING THE MAN-POWER DEPUTED BY THEM FOR THE EXECUTION OF THE SUBJECT WORKS AND SHALL BEAR ALL THE DAMAGE / LOSSES INCURRED BY KE OR OTHERS DUE TO NEGLIGENCE / MISCONDUCT OF THEIR MANPOWER. FURTHER THE CONTRACTOR WILL BE LIABLE TO PAY AT ACTUAL THE AMOUNT CLAIMED BY THE USER DEPARTMENT OF KE TOWARDS LOSSES/DAMAGES TO MEN/MATERIAL/PROPERTY OF KE BY THEIR MANPOWER. IN CASE OF FAILURE OF THE CONTRACTOR TO PAY THE AMOUNT CLAIMED BY USER DEPARTMENT OF KE, THE SAME SHALL BE DEDUCTED AUTOMATICALLY FROM THE CONTRACTOR'S BILL, SECURITY DEPOSIT, PERFORMANCE BOND OR ANY OTHER AMOUNT PAYABLE TO THEM BY KE ON ANY ACCOUNT. - ALL PPE'S WILL BE RESPONSIBILITY OF VENDOR. - ANY OTHER WORK WHICH IS NOT INCLUDED IN THE SCOPE OF WORK BUT IS REASONABLY NECESSARY TO COMPLETE THE JOB IS ASSUMED TO BE INCLUDED IN TO THE SCOPE OF WORK. - JOB COMPLETION PERIOD: 31 DAYS. NOTE: THE PAYMENT WILL BE MADE ON ACTUAL WORK COMPLETION PER JOB BASIS. 1. Vendors are to submit following, at least 2 weeks before commencement of outage; a. A list of skilled manpower for review of user b. A list of tools with certification proof c. Mobilization plan d. Job execution plan including Mile Stones 2. Vendors are bound to; a. Conduct Daily House Keeping, failing which they should be penalized in monitoring terms reflecting in PO b. To appoint Safety Inspector for a group of 20 worker or above. The Safety Inspector should have an experience of 3 years and to be certified by Safety Department of BQPS-1 and must have knowledge of: i. Permit to Work system ii. Risk assessment 3. LDs on vendors shall be implemented due to following Safety violations i. Nonconformance of PPEs ii. Nonconformance of House Keeping iii. Working without Work Permit iv. Unsafe Acts 4. For a group of 100 workers or more, vendors shall be bound to have their own arrangement of ; a. Site facility with Rest Rooms b. Tool facility c. Lunch facility d. Water facility e. Toilet facility Payment Term: Delivery Period: Validation: 120 Days Incoterm: Ex-works/ FOB / CFR Karachi / FOR Plant Site QUOTATION WILL NOT BE ACCEPTED AFTER THE GIVEN DEADLINE DATE Tender document containing detailed scope of work, terms and conditions may be obtained on payment of tender fee (non-refundable) from the undersigned. KE reserves the right to reject any or all the bids and to annul the bidding process at any time without thereby incurring any liability to the affected bidder(s) or any obligation to inform the affected bidder(s). Note:

13 Note: Quote with the reference of the RFQ serial number and men on specs accordingly Detailed relevant Technical literature (English) must be submi ed with bid. Quote original make & origin of all above items. Incomplete quota ons shall not be considered for technical evalua on. Vendors interested to par cipate in the aforesaid tender may obtain RFQ by purchasing the tender document from 1st Floor, Procurement Division (Support Building), Block-J, Elander Road (Power House) Complex, Karachi, Pakistan General Manager (Procurement Supply Chain) 1st Floor, Procurement Division (Support Building), Block-J,