Adapters, Fittings, Connectors

Transcription

1

2 Hose Page Double Braided Stainless Hose 3 Black Braided Nylon Hose 3 Black Nylon Stainless Inner E85 Hose 3 Push-On Black Hose 4 Stainless Braided PTFE Hose 4 Stainless Braided PTFE Conductive Fuel 4 Hose Ends Page Full Swivel Compression Hose Ends 5-6 Crimped Hose Ends 7 Push-Lok Non-Swivel Hose Ends 8-9 Stainless Safety Clamps for Push-Lok 9 Pliers for Stainless Safety Clamps 9 Reusable High Pressure & Brake PTFE Banjo Hose Ends 12 Crimp PTFE Hose Ends 13 Replacement Sleeves 13 Adapters, Fittings, Connectors Page NPT Adapters Straight Flare to Pipe Adapter 14 Tef-Lok Straight Flare to Pipe Adapter 15 Replacement Tef-Lok Seals 15 AN-Lok Straight Flare to Pipe Adapter 16 Straight Swivel FML AN to ML Pipe Adapter Flare to Pipe Elbow Flare to Pipe Elbow Swivel Elbow AN ML to ML Pipe Swivel FML AN to NPT 20 AN Adapters Flare Unions 21 ML to ML Flare Reducer 21 FML to ML Expander (1) Piece 22 FML to ML Expander (2) Piece 22 FML to ML Reducer (1) Piece 23 FML to ML Reducer (2) Piece Swivel Flare Union Flare to Flare Elbow FML to ML AN Swivel Elbow Forged FML to ML AN Swivel Elbow Forged 24 TEE's Flare Tee 25 Stepped Flare Tee On the Run 25 Flare to Pipe TEE On Branch 25 Flare to Pipe On Run TEE 26 AN Flare TEE FML Swivel on Branch 26 AN Flare TEE to FML Swivel On Run 26 Adapters, Fittings, Connectors Page Couplers Straight Swivel Coupler Swivel Coupler Swivel Coupler 27 ORB Fittings Radius Port ORB Adapter Straight 28 AN-Lok Straight Flare to ORB Adapter ORB Fitting ORB Fitting 29 ORB to ORB Swivel Union 30 FML AN Swivel to ML ORB Swivel AN ML to ML ORB 30 Bulkhead Fittings Page Straight Bulkhead Flare Bulkhead Flare Bulkhead Flare 31 Bulkhead Flare TEE On Branch 32 Bulkhead Tee On Run 32 Bulkhead Nuts 32 Metric Fittings Page Straight AN to Metric Adapters Metric to Pipe Reducer Bushings 35 Straight Metric to Barb Adapters 35 Metric Port Plugs 36 Straight AN ML to BSP ML 36 AN Tube Nuts Page Tube Nuts 37 Tube Sleeves 37 AN Caps and Plugs Page Flare Plug 38 Straight Thread O-Ring Plug Hex Head 38 Flare Cap (1) Piece with O-ring 38 Flare Cap (2) Piece Swivel 38 Straight Thread O-Ring Plug Low Profile 39 Plastic Caps 39 Plastic Plugs 39 Vinyl Block Off Caps 39 AN Pipe Thread Fittings Page Allen Socket Pipe Thread Plugs 40 Male Pipe Thread Nipple 40 Pipe Reducer Bushing 40 Female Pipe Thread Coupler ML to FML Pipe Thread Elbow ML to FML Pipe Thread Elbow FML Pipe Thread Elbow 41 FML NPT Tee 41 1

3 Banjo's and Parts Page Straight Short Banjo 43 Straight Long Banjo Banjo Banjo Banjo 43 US Spec Banjo Bolts 44 US Spec Double Banjo Bolts 44 Metric Banjo Bolts 44 Metric Double Banjo Bolts 44 Carburetor Fittings Page FML Carb Inlet Fittings Holley 45 FML Carb Inlet Fittings Other 45 ML Carb Inlet Fittings Holley Short 45 ML Carb Inlet Fittings Holley Long 45 ML Carb Inlet Fittings Other Long 46 ML Carb Inlet Fittings Other Short 46 Carburetor Inlet Plugs 46 Carburetor Banjo Hose Ends 46 Fuel Line Kits 47 Brake, Clutch, & Power Steering Page Coated Brake Lines 59 Straight ML AN to NPT Brake Fittings AN to NPT Brake Fittings AN to NPT Brake Fittings 60 US Spec Straight ML to ML IVF Fittings 60 Straight AN ML to ML IVF Metric Fittings 61 Steering Rack and Pump O-Ring Fittings 62 AN ML to ML Metric O-Ring Fittings 62 Late Mustang US Thread 62 GM Early Steering Box GM Power Steering Fittings 80 and Up 63 Straight ML AN to ML IVF Metric Fittings 63 Straight AN ML to IVF FML NPT Fittings 63 Exhaust Fittings Page O2 Sensor Bung Straight 63 O2 Sensor Bung Oil System Fittings Page Straight ML AN to NPT Brake Fittings 64 Oil Gauge Fittings Extended 64 Fuel System Page Stack Plate Oil Cooler Fittings 64 Fuel Pressure Regulators 48 Fuel Pressure Gauge 48 Transmission Fittings Page OEM TBI Hard Line to Carb Adapter 48 GM PG/TH350/TH400/700R-4/200-4R/1991- Fuel Rail Fittings L60E 65 AN to Metric Inverted Flare 49 GM 4L80 Early Type 65 Clip Type Fuel Rail Fittings GM 49 TM 4L80-4L and Up 65 Screw Back Fuel Rail Fittings Clip Type Fuel Rail Fittings GM 50 Turbo Charger Fittings Page Ford EFI Fittings 50 Straight Turbo Oil Restrictor Fittings 65 AN To ML Quick Connect Straight AN to ML Quick Connect 50 Weld Bungs Page Ford Fuel Pressure & NOS Systems 51 Weld Bungs Female 66 Flare Union Adapter with 1/8 Port 51 Weld Bungs Male Hex Base 66 Flare to Pipe Adapter with 1/8 Port 51 Weld Bungs Male Round Base 66 Female Swivel to ML AN with 1/8 Port 52 Weld Bungs Female NPT 67 AN ML to NPT FML Adapter Fittings 52 Barb Weld Bungs Flare with Port 52 Cap and Weld Bungs 67 Flare Tee's with Port 52 FML Hard Tube Fitting 53 Billet Clamps Page ML Hard Tube Fitting 53 Billet P Clamps 68 Replacement Ferrules for Hard Tube 53 Billet Hose Seperators 68 Male Y Fittings 54 Hex Finishers 69 Female Y Blocks 54 Fuel Cell Bulkheads 54 Tools, Parts & Supplies Page PTFE Washers 54 Billet Vise Jaws 69 Select-Flo Fuel Filters 55 Double Ended AN Wrenches 69 Select-Flo Dual Stage Filters 55 Adjustable AN Wrench 70 Filter Mounting Bracket 55 O-Rings FKM 70 In-Line Compact Filter 56 Aluminum Crush Washers 70 In-Line Compact Push-Lok Filter 56 Metric Aluminum Crush Washers 70 Replacement Filter Parts 56 Cushion Clamps 71 One Way Check Valves 57 Stainless Steel Worm Clamps 71 Fuel Cell Rollover Valve 57 Stainless Steel T-Bolt Clamps 71 In-Line Fuel Shut-off Valve 57 Cooling & Radiator Page Technical Information Page Lightweight In-Line Water Pump 58 Tech Tips LS Water Pump Fittings 58 Finishes 74 2

4 HOSE Phenix Hose products have been tested through independent ASTM laboratories to meet all SAE30R7 standards. Our hoses are engineered to be dimensionally consistent and easier to assemble with reusable fi ngs. The enhanced curing process of the hose uniformly applies the glue and adhesion of glue between the stainless braid and the CPE inner core. This reduces the frays and spreads associated with cut stainless braided hose products. Opera ng temperatures are from 40 to 350+ degrees F and will deliver hydrocarbon and alcohol based fuels, motor oils, and coolant. DOUBLE BRAIDED STAINLESS HOSE Inside Outside Max PSI Min Bend Size Part No. Diameter Diameter Radius 4 K " 6 K " 8 K " 10 K " 12 K " 16 K " 20 K A lightweight alterna ve Our hose is constructed of a high grade CPE inner core surrounded by lightweight stainless center braid and a ghtly woven black nylon outer braid. This combina on gives superior strength and a lighter weight. Not recommended for high vacuum applica ons with using an inner spring support. Opera ng temperatures are from 40 to 350+ degrees F. BLACK BRAIDED NYLON HOSE Inside Outside Max PSI Min Bend Size Part No. Diameter Diameter Radius 4 K " 6 K " 8 K " 10 K " 12 K " 16 K " 20 K Introducing E85 compa ble double braided hose for performance fuel systems This hose features an inner liner of fluoropolymer elastomer (FKM) that has been cer fied to effec vely end the problem of fuel and addi ve vapors seeping through CPE rubber fuel hoses. This new hose come in black nylon featuring a single strand of grey in the weave to dis nguish it from ordinary hose. Opera ng temperatures are from 40 to 350+ degrees F. BLACK NYLON DOUBLE BRAIDED STAINLESS INNER HOSE E85 COMPATIBLE Inside Outside Max PSI Min Bend Size Part No. Diameter Diameter Radius 6 K " 8 K " 10 K " 3

5 PUSH-ON HOSE Designed for reduced weight and increased flexibility, Phenix PushOn Hose features a Class A high oil resistant nitrile inner tube with a reinforcing two spiral aramid fiber and a nitrile/pvc cover resistant to oil and petroleum based products. Our PushOn Hose is compa ble with a wide range of oils and fuels, however is NOT recommended for use with unleaded gasoline. PTFE HOSE Corrosion resistant PTFE inner tube reinforced with a 308 stainless steel outer braid delivers dependable performance for brake lines, clutches, and gas shocks. The smooth bore hose operates from 65 F to 450 F. Stainless steel braid protects cri cal fluids from heat, abrasion, and line expansion to achieve superior performance. PUSH-ON HOSE BLACK HOSE Inside Outside Max PSI Min Bend Size Part No. Diameter Diameter Radius 4 K " 6 K " 8 K " 10 K " 12 K " DO NOT USE with brake fluids or power steering fluids. Temperature range: -30 to +160 F Compatible with Push-Lok Swivel Hose Ends. *Blue Push On Hose no longer available STAINLESS BRAIDED PTFE HOSE Inside Outside Size Part No. Diameter Diameter Max PSI 3 K K K K K TECH TIP Due to the fact that there are a number of unpublished addi ves being put in todays fuel, it is impossible to predict how it will impact the inner liner of our hose. We highly advise that at least once a year you inspect the inner wall of your hoses for deteriora on and damage. It is also highly recommended that hoses be replaced on a regular schedule of every two to three years based on inspec- on. STAINLESS BRAIDED SMOOTH BORE PTFE CONDUCTIVE FUEL HOSE Inside Outside Size Part No. Diameter Diameter Max PSI 4 K K K K

6 HOSE ENDS Constructed from lightweight 6061T6 aluminum and designed for smooth flow, easy assembly, and longer life. All elbow ends are built from onepiece billet tube construc on, avoiding poten al braze joint leakage. Oring seals allow 360 rota on. 37 AN flare assures leak proof sealing surface elimina ng the need for taping. Compa ble with all AN adapter fi ngs. STRAIGHT FULL SWIVEL COMPRESSION HOSE END Size Red/Blue Black Clear 4 J4002 J4003 J J6002 J6003 J J8002 J8003 J J10002 J10003 J J12002 J12003 J J16002 J16003 J J20002 J20003 J20005 COMPATIBLE HOSE TYPES The following series of compression hose ends are designed to be used with these Phenix brand of hoses: 30 SWIVEL HOSE END Double Braided Stainless Hose Black Braided Nylon Hose Black Nylon E85 Hose Size Red/Blue Black Clear 4 J4302 J4303 J J6302 J6303 J J8302 J8303 J J10302 J10303 J FULL SWIVEL COMPRESSION HOSE END Size Red/Blue Black Clear 4 J4452 J4453 J J6452 J6453 J J8452 J8453 J J10452 J10453 J J12452 J12453 J J16452 J16453 J J20452 J20453 J

7 HOSE ENDS 60 SWIVEL HOSE END 90 FULL SWIVEL COMPRESSION HOSE END Size Red/Blue Black Clear 4 J4602 J4603 J J6602 J6603 J J8602 J8603 J J10602 J10603 J10605 Size Red/Blue Black Clear 4 J4902 J4903 J J6902 J6903 J J8902 J8903 J J10902 J10903 J J12902 J12903 J J16902 J16903 J J20902 J20903 J FULL SWIVEL COMPRESSION HOSE END 150 FULL SWIVEL COMPRESSION HOSE END Size Red/Blue Black Clear 4 J41202 J41203 J J61202 J61203 J J81202 J81203 J J J J J J J J J J J J J Size Red/Blue Black Clear 4 J41502 J41503 J J61502 J61503 J J81502 J81503 J J J J J J J J J J J J J FULL SWIVEL COMPRESSION HOSE END Size Red/Blue Black Clear 4 J41802 J41803 J J61802 J61803 J J81802 J81803 J J J J J J J J J J J J J

8 HOSE ENDS STR CRIMPED HOSE END 45 CRIMPED HOSE END 90 CRIMPED HOSE END Size Black/Clear 4 J J J J J J41635 Size Black/Clear 4 J J J J J J Size Black/Clear 4 J J J J J J CRIMPED HOSE END 150 CRIMPED HOSE END 180 CRIMPED HOSE END Size Black/Clear 4 J J J J J J COMPATIBLE HOSE TYPES The following series of crimped hose ends are designed to be used with these Phenix brand of hoses: Size Black/Clear 4 J J J J J J Size Black/Clear 4 J J J J J J Double Braided Stainless Hose Black Braided Nylon Hose Black Nylon E85 Hose **Black/Clear indicates a black hose end with a clear crimped sleeve 7

9 HOSE ENDS PUSH-LOK NON-SWIVEL STR HOSE END PUSH-LOK 30 NON-SWIVEL HOSE END Size Red/Blue Black Clear 4 J34002 J34003 J J36002 J36003 J J38002 J38003 J J J J J J J Size Red/Blue Black Clear 4 J34302 J34303 J J36302 J36303 J J38302 J38303 J J J J J J J PUSH-LOK 45 NON-SWIVEL HOSE END PUSH-LOK 60 NON-SWIVEL HOSE END Size Red/Blue Black Clear 4 J34452 J34453 J J36452 J36453 J J38452 J38453 J J J J J J J Size Red/Blue Black Clear 4 J34602 J34603 J J36602 J36603 J J38602 J38603 J J J J J J J Team Burn The Most. Drivers from Le to Right: Joe Tardiff, Crick Filippi, Elijah Wright. Photographer: Jeff Kindt 8

10 HOSE ENDS PUSH-LOK 90 NON-SWIVEL HOSE END PUSH-LOK 120 NON-SWIVEL HOSE END Size Red/Blue Black Clear 4 J34902 J34903 J J36902 J36903 J J38902 J38903 J J J J J J J PUSH-LOK 150 NON-SWIVEL HOSE END Size Red/Blue Black Clear 4 J J J J J J J J J J J J J J J PUSH-LOK 180 NON-SWIVEL HOSE END Size Red/Blue Black Clear 4 J J J J J J J J J J J J J J J STAINLESS SAFETY CLAMPS FOR PUSH-LOK HOSE ENDS Size Red/Blue Black Clear 4 J J J J J J J J J J J J J J J PLIERS FOR STAINLESS SAFETY CLAMPS Pkg of 4 Size Stainless 4 M M M M M M

11 HOSE ENDS REUSABLE HIGH PRESSURE & BRAKE PTFE HOSE ENDS REUSABLE STRAIGHT PTFE SWIVEL HOSE ENDS Size Red/Blue Black Clear Steel Black Steel Stainless 3 J03002 J03003 J03005 J03007 J03008 J J04002 J04003 J04005 J04007 J04008 J J06002 J06003 J06005 J06007 J06008 J J08002 J08003 J08005 J08007 J J J J REUSABLE 45 PTFE SWIVEL HOSE ENDS Size Red/Blue Black Clear Steel Black Steel 3 J03452 J03453 J03455 J03457 J J04452 J04453 J04455 J04457 J J06452 J06453 J06455 J06457 J J08452 J08453 J08455 J08457 J J J J REUSABLE 45 PTFE HOSE ENDS FORGED Size Steel Black Steel Stainless 3 J J J J J J J J J Team Burn The Most. Driver: Robert Ljuba. Photographer: Brandon Hallmark /Gearbanger Studios 10

12 HOSE ENDS REUSABLE 90 PTFE SWIVEL HOSE ENDS Size Red/Blue Black Clear Steel Black Steel 3 J03902 J03903 J03905 J03907 J J04902 J04903 J04905 J04907 J J06902 J06903 J06905 J06907 J J08902 J08903 J08905 J08907 J J J J REUSABLE 90 PTFE HOSE ENDS FORGED Size Steel Black Steel Stainless 3 J J J J J J J J J NHRA Heritage Series Champion Nitro Funny Car Northwest Hitter piloted by Kris Krabill 11

13 HOSE ENDS REUSABLE BANJO HOSE ENDS SHORT REUSABLE BANJO HOSE ENDS LONG Hose Size Size Steel Black Steel Stainless 3 10 MM 3/8 J J J /16 J J J Hose Size Size Steel Black Steel 3 10 MM 3/8 J J /16 J J REUSABLE 20 BANJO HOSE END Hose Size Size Steel Black Steel Stainless 3 10 MM 3/8 J J J /16 J J J REUSABLE 30 BANJO HOSE ENDS Hose Size Size Steel Black Steel Stainless 3 10 MM 3/8 J J J REUSABLE 45 BANJO HOSE ENDS Hose Size Size Steel Black Steel Stainless 3 10 MM 3/8 J J J /16 J J J REUSABLE 90 BANJO HOSE ENDS REUSABLE TWIN BANJO HOSE END Size Size Steel Black Steel Stainless 3 10 MM 3/8 J J J /16 J J J Size Size Stainless 3 10 MM 3/8 J /16 J

14 HOSE ENDS CRIMP PTFE HOSE END STRAIGHT 45 CRIMP PTFE HOSE END Size Steel Black Steel Stainless 3 G3007 G3008 G G4007 G G6007 G60011 Size Steel Black Steel Stainless 3 G3457 G3458 G G4457 G G6457 G CRIMP PTFE HOSE END REPLACEMENT CRIMP FERRULES Size Steel Black Steel Stainless 3 G3907 G3908 G G4907 G G6907 G69011 Size Steel Black Steel Stainless 3 G3107 G3108 G G4107 G G6107 G61011 REPLACEMENT SLEEVES *FOR PTFE HOSE ENDS REPLACEMENT SLEEVES *FOR BRAZED ALUM PTFE HOSE ENDS Size Brass 3 G G G G Size Aluminum 3 G G G G G

15 ADAPTERS, FITTINGS & COUPLERS Phenix offers an extensive line of lightweight aluminum, steel, and stainless steel adapters designed for leakproof sealing with any manufacturer s hose ends. Made in the USA. STRAIGHT FLARE TO PIPE ADAPTER AN NPT Black Blue Clear Steel Black Steel Stainless Brass 3 1/16 B316-3 B316-4 B B /8 B318-3 B318-4 B318-5 B318-7 B318-8 B /4 B314-3 B314-4 B /8 B338-3 B338-4 B /16 B416-3 B416-4 B B /8 B418-3 B418-4 B /4 B414-3 B414-4 B /8 B438-3 B438-4 B /2 B412-3 B412-4 B /8 B618-3 B618-4 B /4 B614-3 B614-4 B /8 B638-3 B638-4 B /2 B612-3 B612-4 B /4 B814-3 B814-4 B /8 B838-3 B838-4 B /2 B812-3 B812-4 B /4 B834-3 B834-4 B /4 B B B /8 B B B /2 B B B /4 B B B /2 B B B /4 B B B B121-3 B121-4 B /4 B B B B161-3 B161-4 B B201-3 B201-4 B /4 B B B

16 ADAPTERS, FITTINGS & COUPLERS TEF-LOK REPLACEMENT TEF-LOK SEALS The TEKLOK sealing system not only keeps your fi ngs from seeping, they will help to prevent your fi ngs from inadvertently loosing during extreme use. The unique design of the seal protrudes about four thousandths of an inch for an interference fit when ghtened and will help in maintaining tension on the fi ng Bnut when properly torqued. These fi ngs should be ghtened the same as any other AN type of fi ng being careful NOT to over ghten. Please refer to the never exceed torque specifica on in our Technical Sec on. TEF-LOK STRAIGHT FLARE TO PIPE ADAPTER AN Size Part No. 3 TS203 4 TS204 6 TS206 8 TS TS TS TS216 AN NPT Black Blue Clear 3 1/8 TB318-3 TB318-4 TB /4 TB314-3 TB314-4 TB /8 TB338-3 TB338-4 TB /8 TB4183 TB4184 TB /4 TB4143 TB4144 TB /8 TB4383 TB4384 TB /2 TB4123 TB4124 TB /8 TB6183 TB6184 TB /4 TB6143 TB6144 TB /8 TB6383 TB6384 TB /2 TB6123 TB6124 TB /4 TB8143 TB8144 TB /8 TB8383 TB8384 TB /2 TB8123 TB8124 TB /4 TB8343 TB8344 TB /4 TB10143 TB10144 TB /8 TB10383 TB10384 TB /2 TB10123 TB10124 TB /4 TB10343 TB10344 TB /2 TB12123 TB12124 TB /4 TB12343 TB12344 TB TB1213 TB1214 TB /4 TB16343 TB16344 TB TB1613 TB1614 TB

17 ADAPTERS, FITTINGS & COUPLERS AN-LOK The Revolutionary Design that changed AN Fittings AN-LOK STRAIGHT FLARE TO NPT ADAPTER AN NPT Black / Red 4 1/8 SB /4 SB /8 SB /8 SB /4 SB /8 SB /2 SB /4 SB /8 SB /2 SB /4 SB /8 SB /2 SB /4 SB /4 SB SB12131 STRAIGHT SWIVEL FEMALE AN TO MALE PIPE ADAPTERS AN NPT Black Blue Clear 3 1/8 C13513 C13514 C /8 C14513 C14514 C /4 C14523 C14524 C /8 C16503 C16504 C /4 C16513 C16514 C /8 C16523 C16524 C /4 C18503 C18504 C /8 C18513 C18514 C /2 C18523 C18524 C /8 C C C /2 C C C /2 C C C /4 C C C /4 C C C C C C

18 ADAPTERS, FITTINGS & COUPLERS 45 FLARE TO PIPE ELBOW ALUMINUM AN NPT Black Blue Clear 3 1/8 B B B /4 B B B /8 B B B /4 B B B /8 B B B /8 B B B /4 B B B /8 B B B /2 B B B /4 B B B /8 B B B /2 B B B /4 B B B /8 B B B /2 B B B /4 B B B /2 B B B /4 B B B B B B /4 B B B B B B B B B FLARE TO PIPE ELBOW STEEL & STAINLESS AN NPT Steel Black Steel Stainless 3 1/8 B B B /8 B

19 ADAPTERS, FITTINGS & COUPLERS 90 FLARE TO PIPE ELBOW ALUMINUM AN NPT Black Blue Clear 3 1/8 B B B /4 B B B /8 B B B /4 B B B /8 B B B /8 B B B /4 B B B /8 B B B /2 B B B /4 B B B /8 B B B /2 B B B /4 B B B /8 B B B /2 B B B /4 B B B /2 B B B /4 B B B B B B /4 B B B B B B FLARE TO PIPE ELBOW STEEL & STAINLESS AN NPT Steel Black Steel Stainless 3 1/8 B B B

20 ADAPTERS, FITTINGS & COUPLERS 90 SWIVEL ELBOW AN MALE TO MALE PIPE AN NPT Black Blue Clear 3 1/8 C03513 C03514 C /8 C04513 C04514 C /4 C04543 C04544 C /8 C06513 C06514 C /4 C06543 C06544 C /8 C06533 C06534 C /4 C08513 C08514 C /8 C08543 C08544 C /2 C08533 C08534 C /8 C10533 C10534 C /2 C10543 C10544 C /2 C12533 C12534 C /4 C12543 C12544 C /4 C16343 C16344 C C1613 C1614 C

21 ADAPTERS, FITTINGS & COUPLERS 90 SWIVEL FEMALE AN TO NPT AN NPT Black Blue Clear 3 1/8 C C C /8 C C C /4 C C C /8 C C C /4 C C C /8 C C C /4 C C C /8 C C C /2 C C C /8 C C C /2 C C C /2 C C C /4 C C C /4 C C C C C C In 2016 Phenix par cipated with Rebuilding Genera ons, a youth group that brings young adults and older men together to restore and build cars with a focus on developing life skills for use on future projects or careers. Their 1965 Fastback Mustang was proudly unveiled at this years SEMA Show and featured Phenix s new Fuel Pressure Gauge, available on page

22 ADAPTERS, FITTINGS & COUPLERS FLARE UNIONS AN Black Blue Clear Steel Black Steel Stainless 3 A333 A334 A335 A337 A338 A A443 A444 A445 6 A663 A664 A665 8 A883 A884 A A10103 A10104 A A12123 A12124 A A16163 A16164 A A20203 A20204 A20205 MALE TO MALE FLARE REDUCER AN AN Black Blue Clear Steel Black Steel 4 3 A433 A434 A435 A437 A A633 A634 A A643 A644 A A843 A844 A A863 A864 A A1063 A1064 A A1083 A1084 A A1263 A1264 A A1283 A1284 A A12103 A12104 A A16103 A16104 A A16123 A16124 A A20123 A20124 A A20163 A20164 A

23 ADAPTERS, FITTINGS & COUPLERS FEMALE TO MALE AN EXPANDERS 1 PIECE Female Male Black Blue Clear 3 4 C1343 C1344 C C1363 C1364 C C1463 C1464 C C1483 C1484 C C1683 C1684 C C C C C C C C C C C C C C C C C C C FEMALE TO MALE AN EXPANDERS 2 PIECE SWIVEL Female Male Black Blue Clear 3 4 C343 C344 C C463 C464 C C683 C684 C C8103 C8104 C C10123 C10124 C C12163 C12164 C C16203 C16204 C

24 ADAPTERS, FITTINGS & COUPLERS FEMALE TO MALE AN REDUCERS 1 PIECE Female Male Black Blue Clear 4 3 C433 C434 C C633 C634 C C643 C644 C C843 C844 C C863 C864 C C1043 C1044 C C1063 C1064 C C1083 C1084 C C1283 C1284 C C12103 C12104 C C16103 C16104 C C16123 C16124 C16125 FEMALE TO MALE AN REDUCERS 2 PIECE SWIVEL Female Male Black Blue Clear 4 3 C4313 C4314 C C6413 C6414 C C8413 C8414 C C8613 C8614 C C10613 C10614 C C10813 C10814 C C12813 C12814 C C C C C C C C C C C C C FLARE UNION Size Black Blue Clear 3 A3453 A3454 A A4453 A4454 A A6453 A6454 A A8453 A8454 A A10453 A10454 A A12453 A12454 A A16453 A16454 A

25 ADAPTERS, FITTINGS & COUPLERS 90 FLARE TO FLARE ELBOW AN Black Blue Clear 3 A3903 A3904 A A4903 A4904 A A6903 A6904 A A8903 A8904 A A10903 A10904 A A12903 A12904 A A16903 A16904 A FEMALE TO MALE AN SWIVEL ELBOW FORGED AN Black Blue Clear 3 C03453 C03454 C C04453 C04454 C C06453 C06454 C C08453 C08454 C C C C C C C C C C FEMALE TO MALE AN SWIVEL ELBOW FORGED AN Black Blue Clear 3 C03473 C03474 C C04473 C04474 C C06473 C06474 C C08473 C08474 C C10473 C10474 C C12473 C12474 C C16473 C16474 C

26 ADAPTERS, FITTINGS & COUPLERS FLARE TEE AN Black Blue Clear Steel Black Steel Stainless 3 A3243 A3244 A3245 A3247 A3248 A A4243 A4244 A A6243 A6244 A A8243 A8244 A A10243 A10244 A A12243 A12244 A A16243 A16244 A16245 STEPPED FLARE TEE ON THE RUN AN AN AN Black Blue Clear A84243 A84244 A84245 FLARE TO PIPE TEE ON BRANCH AN NPT AN Black Blue Clear Stainless 3 1/8 3 B3253 B3254 B3255 B /8 4 B4253 B4254 B /4 6 B6253 B6254 B /8 8 B8253 B8254 B /2 10 B10253 B10254 B /4 12 B12253 B12254 B /4 16 B16353 B16354 B B16253 B16254 B B20013 B20014 B /4 20 B20253 B20254 B

27 ADAPTERS, FITTINGS & COUPLERS FLARE TO PIPE ON RUN TEE NPT AN AN Black Blue Clear Stainless 1/8 3 3 B3263 B3264 B3265 B /8 4 4 B4263 B4264 B4265 1/4 6 6 B6263 B6264 B6265 3/8 8 8 B8263 B8264 B8265 1/ B10263 B10264 B / B12263 B12264 B / B16283 B16284 B B16263 B16264 B B20163 B20164 B / B20263 B20264 B20265 AN FLARE TEE FEMALE SWIVEL ON BRANCH AN Black Blue Clear 3 C03433 C03434 C C04433 C04434 C C06433 C06434 C C08433 C08434 C C10433 C10434 C C12433 C12434 C C16433 C16434 C16435 AN FLARE TEE TO FEMALE SWIVEL ON RUN AN Black Blue Clear 3 C03443 C03444 C C04443 C04444 C C06443 C06444 C C08443 C08444 C C10443 C10444 C C12443 C12444 C C16443 C16444 C

28 ADAPTERS, FITTINGS & COUPLERS STRAIGHT SWIVEL COUPLER AN AN Black Blue Clear 3 3 C33 C34 C C43 C44 C C63 C64 C C6813 C6814 C C83 C84 C C81003 C81004 C C103 C104 C C C C C123 C124 C C163 C164 C C203 C204 C SWIVEL COUPLER AN Red/Blue Black Clear 3 C3452 C3453 C C4452 C4453 C C6452 C6453 C C8452 C8453 C C10452 C10453 C C12452 C12453 C C16452 C16453 C C20452 C20453 C SWIVEL COUPLER AN Red/Blue Black Clear 3 C3902 C3903 C C4902 C4903 C C6902 C6903 C C8902 C8903 C C10902 C10903 C C12902 C12903 C C16902 C16903 C C20902 C20903 C

29 ADAPTERS, FITTINGS & COUPLERS RADIUS PORT ORB ADAPTER FITTINGS STRAIGHT Includes Oring ORB AN Black Blue Clear 3 3 D333 D334 D D343 D344 D D433 D434 D D443 D444 D D463 D464 D D643 D644 D D663 D664 D D683 D684 D D843 D844 D D863 D864 D D883 D884 D D8103 D8104 D D8123 D8124 D D1043 D1044 D D1063 D1064 D D1083 D1084 D D10103 D10104 D D10123 D10124 D D1283 D1284 D D12103 D12104 D D12123 D12124 D D12163 D12164 D D16103 D16104 D D16123 D16124 D D16163 D16164 D D16203 D16204 D D20163 D20164 D D20203 D20204 D

30 ADAPTERS, FITTINGS & COUPLERS AN-LOK STRAIGHT FLARE TO AN ORB ADAPTER AN ORB Black / Red 4 4 SA SA SA SA SA SA SA SA SA SA SA SA SA TECH TIP AN-LOK and TEFLOK not only keep your fittings from seeping, they will help prevent your fittings from inadvertently loosening during extreme use. The unique design of the PTFE seal protrudes for an interference fit when tightened and will help in maintaining tension on the fitting B-nut when properly torqued. These fittings should be tightened the same as any other AN type of fitting being careful NOT to over tighten. Please refer to the never exceed torque specification in our technical section. 45 O-RING BOSS FITTING 90 O-RING BOSS FITTING ORB AN Black Blue 6 6 D66453 D D88453 D D D ORB AN Black Blue 6 6 D66903 D D88903 D D D D D D D

31 ADAPTERS, FITTINGS & COUPLERS ORB TO ORB SWIVEL UNION ORB AN Black Blue Clear 6 6 D27663 D27664 D D27883 D27884 D D D D D D D FEMALE AN SWIVEL TO MALE ORB Includes Oring ORB AN Black Blue Clear 6 6 D07663 D07664 D D07883 D07884 D D D D D D D SWIVEL AN MALE TO MALE ORB Includes Oring ORB AN Black Blue Clear 6 6 D50663 D50664 D D50883 D50884 D D D D D D D

32 AN BULKHEAD FITTINGS STRAIGHT BULKHEAD FLARE UNION Includes Nut Size Black Blue Clear Steel Blk Steel Stainless 3 A23323 A23324 A23325 A23327 A23328 A A24323 A24324 A A26323 A26324 A A28323 A28324 A A A A A A A A A A A A A BULKHEAD FLARE UNION Includes Nut Size Black Blue Clear Steel Blk Steel Stainless 3 A23373 A23374 A23375 A23377 A23378 A A24373 A24374 A A26373 A26374 A A28373 A28374 A A A A A A A A A A A A A BULKHEAD FLARE UNION Includes Nut Size Black Blue Clear Steel Blk Steel Stainless 3 A3333 A3334 A3335 A3337 A3338 A A4333 A4334 A A6333 A6334 A A8333 A8334 A A10333 A10334 A A12333 A12334 A A16333 A16334 A

33 BULKHEAD FLARE TEE ON BRANCH AN BULKHEAD FITTINGS Includes Nut Size Black Blue Clear Steel Blk Steel Stainless 3 A23343 A23344 A23345 A23347 A23348 A A24343 A24344 A A26343 A26344 A A28343 A28344 A A A A A A A A A A A A A BULKHEAD TEE ON RUN Includes Nut Size Black Blue Clear Steel Blk Steel Stainless 3 A23353 A23354 A23355 A23357 A23358 A A24353 A24354 A A26353 A26354 A A28353 A28354 A A A A A A A A A A A A A BULKHEAD NUTS *Pkg of 2 Size Black Blue Clear Steel Blk Steel Stainless 3 A3313* A3314* A3315* A3317* A3318* A33111* 4 A4313* A4314* A4315* 6 A6313* A6314* A6315* 8 A8313* A8314* A8315* 10 A10313 A10314 A A12313 A12314 A A16313 A16314 A A20313 A20314 A

34 METRIC FITTINGS STRAIGHT AN TO METRIC ADAPTER FITTINGS Includes Crush Washer Size Black Blue Clear 4 x M6 X 1.0 A A A x M8 X 1.0 A41393 A41394 A x M8 X 1.25 A A A x M8 X 1.5 A41593 A41594 A x M10 X 1.0 A40393 A40394 A x M10 X 1.25 A42393 A42394 A x M10 X 1.5 A43393 A43394 A x M12 X 1.0 A A A x M12 X 1.25 A A A x M12 X 1.50 A44393 A44394 A x M14 X 1.25 A A A x M14 X 1.50 A45393 A45394 A x M10 X 1.0 A A A x M10 X 1.25 A61393 A61394 A X M10 X 1.5 A61493 A61494 A X M12 X 1.0 A A A X M12 X 1.25 A A A X M12 X 1.5 A62393 A62394 A X M14 X 1.25 A A A X M14 X 1.5 A64393 A64394 A X M16 X 1.5 A67393 A67394 A X M18 X 1.5 A68393 A68394 A X M20X 1.5 A A A X M22 X 1.5 A A A X M24 X 1.5 A A A X M10 X 1.0 A A A X M10 X 1.25 A A A

35 STRAIGHT AN TO METRIC ADAPTER FITTINGS (CONTINUED) METRIC FITTINGS Includes Crush Washer Size Black Blue Clear 8 X M10 X 1.5 A A A X M12 X 1.25 A A A X M12 X 1.5 A82393 A82394 A X M14 X 1.25 A A A X M14 X 1.5 A84393 A84394 A X M16 X 1.5 A86393 A86394 A X M18 X 1.5 A88393 A88394 A X M20 X 1.5 A A A X M22 X 1.5 A A A X M24 X 1.5 A A A X M12 X 1.0 A A A X M12 X 1.25 A A A X M12 X 1.5 A A A X M14 X 1.5 A A A X M16 X 1.5 A A A X M18 X 1.5 A A A X M20 X 1.5 A A A X M22 X 1.5 A A A X M24 X 1.5 A A A X M12 X 1.0 A A A X M12 X 1.25 A A A X M12 X 1.5 A A A X M14 X 1.5 A A A X M16 X 1.5 A A A X M18 X 1.5 A A A X M20 X 1.5 A A A X M22 X 1.5 A A A X M24 X 1.5 A A A X M30 X 1.5 A A A X M16 X 1.5 A A A X M18 X 1.5 A A A X M20 X 1.5 A A A X M30 X 1.5 A A A

36 METRIC FITTINGS METRIC TO PIPE REDUCER BUSHINGS Includes Crush Washer Size Black Blue Clear 12MM X 1.5 X 1/8NPT B12183 B12184 B MM X 1.5 X 1/8NPT B14183 B14184 B MM X 1.5 X 1/8NPT B16183 B16184 B MM X 1.5 X 1/4NPT B16143 B16144 B MM X 1.5 X 1/8NPT B18183 B18184 B MM X 1.5 X 1/4NPT B18143 B18144 B MM X 1.5 X 1/8NPT B20183 B20184 B MM X 1.5 X 1/4NPT B20143 B20144 B MM X 1.5 X 3/8NPT B20383 B20384 B MM X 1.5 X 3/8NPT B30383 B30384 B MM X 1.5 X 1/2NPT B30123 B30124 B MM X 1.5 X 3/4NPT B30343 B30344 B30345 STRAIGHT METRIC TO BARB ADAPTERS Size Black Blue Clear M12 X 1.5 X 5/16 J J J M12 X 1.5 X 3/8 J J J M14 X 1.5 X 5/16 J J J M14 X 1.5 X 3/8 J J J M18 X 1.5 X 3/8 J J J M18 X 1.5 X 1/2 J J J M18 X 1.5 X 3/4 J J J

37 METRIC FITTINGS METRIC PORT PLUGS Includes Crush Washer Size Black Blue Clear M10 X 1.0 A A A M10 X 1.25 A A A M12 X 1.5 A A A M14 X 1.5 A A A M16 X 1.5 A A A M18 X 1.5 A A A STRAIGHT AN MALE TO BSP MALE Size Black Blue Clear 4 X 1/8 X 28 BSP B B B X 1/8 X 28 BSP B B B X 1/4 X 19 BSP B B B X 3/8 X 19 BSP B B B X 1/2 X 14 BSP B B B X 1/4 X 19 BSP B B B X 3/8 X 19 BSP B B B X 1/2 X 14 BSP B B B X 3/8 X 19 BSP B B B X 1/2 X 14 BSP B B B X 3/4 X 14 BSP B B B X 1/2 X 14 BSP B B B

38 AN TUBE NUTS TUBE NUTS *Pkg of 6 **Pkg of 2 Size Black Blue Clear Steel Blk Steel Stainless 3* C03183 C03184 C03185 C03187 C03188 C * C04183 C04184 C ** C06183 C06184 C ** C08183 C08184 C C10183 C10184 C C12183 C12184 C C16183 C16184 C16185 TUBE SLEEVE *Pkg of 6 **Pkg of 2 Size Black Blue Clear Steel Blk Steel Stainless 3* C03193 C03194 C03195 C03197 C03198 C * C04193 C04194 C ** C06193 C06194 C ** C08193 C08194 C C10193 C10194 C C12193 C12194 C C16193 C16194 C

39 AN CAPS & PLUGS FLARE PLUG STRAIGHT THREAD O-RING PLUG HEX HEAD Size Black Blue Clear 3 A03063 A03064 A A04063 A04064 A A06063 A06064 A A08063 A08064 A A10063 A10064 A A12063 A12064 A A16063 A16064 A A20063 A20064 A20065 Size Black Blue Clear 3 A03143 A03144 A A04143 A04144 A A06143 A06144 A A08143 A08144 A A10143 A10144 A A12143 A12144 A A16143 A16144 A A20143 A20144 A20145 FLARE CAP 1 PIECE WITH O-RING One Piece Flare Cap - Detail Images Size Black Blue Clear 3 A A A A A A A A A A A A A A A A A A A A A A A A FLARE CAP 2 PIECE SWIVEL Size Black Blue Clear 3 A03293 A03294 A A04293 A04294 A A06293 A06294 A A08293 A08294 A A10293 A10294 A A12293 A12294 A A16293 A16294 A16295 Stainless A

40 AN CAPS & PLUGS STRAIGHT THREAD O-RING PLUG ROUND HEAD LOW PROFILE Size Black Blue Clear 3 A03203 A03204 A A04203 A04204 A A06203 A06204 A A08203 A08204 A A10203 A10204 A A12203 A12204 A A16203 A16204 A A20213 A20214 A20215 PLASTIC CAPS PLASTIC PLUGS Pkg of 10 Size Yellow 3 A003 4 A004 6 A006 8 A A A A A020 Pkg of 10 Size Yellow 3 A A A A A A A A0020 VINYL BLOCK OFF CAPS Pkg of 5 Size Yellow 1.5" A " A " A " A

41 AN PIPE THREAD FITTINGS ALLEN SOCKET PIPE THREAD PLUGS MALE PIPE THREAD NIPPLE *Pkg of 2 NPT Black Blue Clear 1/16* A11043 A11044 A /8* A12043 A12044 A /4* A25043 A25044 A /8* A37043 A37044 A /2 A50043 A50044 A /4 A75043 A75044 A A85043 A85044 A85045 NPT Black Blue Clear 1/8 B12113 B12114 B /4 B25113 B25114 B /8 B37113 B37114 B /2 B50113 B50114 B /4 B75113 B75114 B B87113 B87114 B87115 PIPE REDUCER BUSHINGS NPT NPT Black Blue Clear 1/4 1/8 B21123 B21124 B /8 1/8 B31123 B31124 B /8 1/4 B32123 B32124 B /2 1/8 B51123 B51124 B /2 1/4 B52123 B52124 B /2 3/8 B53123 B53124 B /4 1/4 B73133 B73134 B /4 3/8 B73123 B73124 B /4 1/2 B75123 B75124 B /8 B13123 B13124 B /2 B15123 B15124 B /4 B17123 B17124 B17125 FEMALE PIPE THREAD COUPLER NPT Black Blue Clear 1/8 B12103 B12104 B /4 B25103 B25104 B /8 B37103 B37104 B /2 B50103 B50104 B /4 B75103 B75104 B B87103 B87104 B

42 AN PIPE THREAD FITTINGS 45 MALE TO FML PIPE THREAD ELBOW NPT Black Blue Clear 1/8 B B B /4 B B B /8 B B B /2 B B B /4 B B B B91513 B91514 B /4 B B B FEMALE PIPE THREAD ELBOW 90 MALE TO FML PIPE THREAD ELBOW NPT Black Blue Clear 1/8 B B B /4 B B B /8 B B B /2 B B B /4 B B B B91413 B91414 B /4 B B B NPT Black Blue Clear 1/8 B B B /4 B B B /8 B B B /2 B B B /4 B B B B91613 B91614 B91615 FEMALE NPT TEE NPT Black Blue Clear 1/8 B B B /4 B B B /8 B B B /2 B B B /4 B B B B91713 B91714 B

43 STRAIGHT BARB TO FLARE ADAPTER BARB STYLE AN FITTINGS AN Barb Black Blue Clear 4 1/4 J J J /8 J J J /2 J J J /8 J J J /4 J J J PUSH-LOK ADAPTER FITTINGS STRAIGHT BARB TO PIPE ADAPTER (AUTOMOTIVE SPEC) NPT Barb Black Blue Clear 1/4 1/4 J J J /4 3/8 J J J /8 1/2 J J J /2 5/8 J J J /4 3/4 J J J Heritage Series Funny Car piloted by Will Martin 42

44 BANJO S AND PARTS STRAIGHT SHORT BANJO AN Size Steel Black Steel Stainless /8 G G G /16 G G G /8 G G G /16 G G G STRAIGHT LONG BANJO AN Size Steel Black Steel Stainless /8 G G G G G G /8 G G G G G G BANJO 45 BANJO AN Size Steel Black Steel Stainless /8 G G G /16 G G G G G G AN Size Steel Black Steel Stainless 3 103/8 G G G /16 G G G G G G /8 G G G BANJO AN Size Steel Black Steel Stainless /8 G G G /16 G G G G G G /8 G G G /16 G G G

45 BANJO BOLTS US SPEC DOUBLE BANJO BOLTS US SPEC BANJO BOLTS Includes Crush Washers Grip Size Length Steel Stainless 3/8 x G G /8 x G G /16 x G Includes Crush Washers Grip Size Length Steel Stainless 3/8 x G G /8 x G G /16 x G G /16 x G G /16 x G G /16 x G G /16 x G METRIC DOUBLE BANJO BOLTS METRIC BANJO BOLTS Includes Crush Washers Grip Size Length Steel Stainless M8x G M10x G G M10x G G M10x G G M10x G G M10x G M12x G M12x G G M12x G M12x G G M12x G M12x G G Includes Crush Washers Grip Size Length Steel Stainless M8x G M10x G G M10x G G M10x G G M10x G G M12x G TECH TIP Grip Length is the distance from the bottom of the Hex to the end of the bolt 44

46 CARBURETOR FITTINGS FEMALE CARBURETOR INLET FITTINGS HOLLEY Pkg of 2 Includes Applicable Oring or Washer AN Size Applica on Red/Blue Black Clear 6 7/820 Holley H062 H063 H /820 Holley H082 H083 H ORB Holley Ultra HP H1062 H1063 H ORB Holley Ultra HP H1082 H1083 H1085 FEMALE CARBURETOR INLET FITTINGS (OTHER) Pkg of 2 Includes Applicable Oring or Washer AN Size Applica on Red/Blue Black Clear 6 9/16x24 Demon BG H162 H163 H /16x24 Demon BG H182 H183 H185 MALE CARBURETOR INLET FITTINGS HOLLEY SHORT Pkg of 2 Includes Applicable Oring or Washer AN Size Applica on Black Blue Clear 6 7/8x20 Holley Short H0683 H0684 H /8x20 Holley Short H0873 H0874 H ORB Ultra HP Short H00683 H00684 H ORB Ultra HP Short H00873 H00874 H00875 MALE CARBURETOR INLET FITTINGS HOLLEY LONG Pkg of 2 Includes Applicable Oring or Washer AN Size Applica on Black Blue Clear 6 7/8x20 Holley Long H0663 H0664 H /8x20 Holley Long H0883 H0884 H ORB Ultra HP Long H00663 H00664 H ORB Ultra HP Long H00883 H00884 H

47 CARBURETOR FITTINGS MALE CARBURETOR INLET FITTINGS OTHER - LONG Pkg of 2. Includes Crush Washer AN Size Applica on Black Blue Clear 6 9/16x BG, Demon, Holley SGL 600 H40693 H40694 H /16x BG, Demon, Holley SGL 600 H40703 H40704 H /16x BG, Demon, Holley SGL 600 H40893 H40894 H40895 MALE CARBURETOR INLET FITTINGS OTHER - SHORT *Pkg of 2. Includes Crush Washer AN Size Applica on Black Blue Clear 6* 5/8x20 Carter, AFB, Edelbrock H40673 H40674 H /2x20 Edelbrock 94 H9463 H9464 H9465 CARBURETOR INLET PLUGS Includes Crush Washer Size Black Blue Clear 7/8x20 H40993 H40994 H40995 CARBURETOR BANJO HOSE ENDS Includes Sealing Washers AN Size Applica on Red/Blue Black Clear 6 9/16x24 Holley H44232 H44233 H /8x20 Carter, AFB, Edelbrock H44272 H44273 H

48 CARBURETOR FITTINGS FUEL LINE KITS Includes Applicable Crush Washers Size Applica on Black/Stainless Hose Red & Blue/Stainless Hose Black/Black Hose 6 Holley 4150 H51171 H51172 H Holley 4150 H51151 H51152 H Ultra H51061 H51062 H Ultra H51081 H51082 H Holley 4500 Dominator H51141 H51142 H Holley Ultra Dominator H61141 H61142 H Demon BG H51131 H51132 H Demon BG H51181 H51182 H

49 FUEL SYSTEM FUEL PRESSURE REGULATORS Size Type Applica on Black Black 6 Carbureted 5 to 12 lbs Gas or Alcohol 1/8 Pressure Port F EFI 3065 lbs Gas or Alcohol 1/8 Pressure Port Boost Referenced 1:1 F FUEL PRESSURE GAUGE Port Type Applica on Black 1/8 Carbureted 0 TO 15 PSI SILICONE FILLED F /8 EFI 0 TO 100 PSI SILICONE FILLED Black F Phenix Fuel Pressure Gauges are manufactured in the USA and silicon filled for vibration resistance and available in two different pressure configurations. 0 to 15 PSI for carbureted applications and 0 to 100 PSI for fuel injected systems. These gauges are in an all-black case and face with high visibility yellow numbers and markings OEM TBI HARD LINE TO CARB ADAPTER AN MM Black Blue Clear 6 14 H614F3 H614F4 H614F H616F3 H616F4 H616F5 48

50 FUEL SYSTEM FUEL RAIL FITTINGS Includes ORing AN Size Black Blue Clear Steel Black Steel 6 14MM x 1.5 F64393 F64394 F64395 F64397 F MM x 1.5 F66393 F66394 F66395 F66397 F MM x 1.5 F68393 F68394 F68395 F68397 F68398 AN TO METRIC INVERTED FLARE Honda Mitsubishi 14mm fuel line adapter fitting AN Size Black Blue Clear 6 14MM x 1.5 H614IF3 H614IF4 H614IF5 CLIP TYPE FUEL RAIL FITTINGS GM AN NPT Black Blue Clear 6 5/16 F65163 F65164 F /8 F6383 F6384 F /8 F8383 F8384 F8385 SCREW BACK FUEL RAIL FITTINGS AN NPT Black Blue Clear 6 5/16 F F F /16 F F F /8 F F F /8 F83803 F83804 F

51 FUEL SYSTEM 90 CLIP TYPE FUEL RAIL FITTINGS GM AN NPT Black Blue Clear 6 5/16 F F F /8 F F F /8 F F F FORD EFI FITTINGS AN Size Black Blue Clear F64343 F64344 F F65503 F65504 F F85503 F85504 F85505 AN TO MALE QUICK CONNECT STRAIGHT AN NPT Black Blue Clear 6 5/16 F F F /8 F63813 F63814 F /16 F F F /8 F83813 F83814 F AN TO MALE QUICK CONNECT AN NPT Black Blue Clear 6 5/16 F F F /8 F F F /8 F F F

52 FUEL SYSTEM FORD FUEL PRESSURE FITTINGS & NOS SYSTEMS AN NPT Black Blue Clear Stainless 4 1/16 B4163 B4164 B4165 B41611 FLARE UNION ADAPTER WITH 1/8 PORT AN Black Blue Clear 3 A03783 A03784 A A04783 A04784 A A06683 A06684 A A08783 A08784 A A10783 A10784 A A12783 A12784 A A16783 A16784 A16785 FLARE TO PIPE ADAPTER WITH 1/8 PORT AN NPT Black Blue Clear 4 1/8 A04183 A04184 A /8 A06183 A06184 A /4 A06783 A06784 A /8 A06883 A06884 A /4 A08883 A08884 A /8 A08983 A08984 A /2 A A A

53 FEMALE SWIVEL TO MALE AN WITH 1/8 PORT FUEL SYSTEM AN Black Blue Clear 3 A03313 A03314 A A04413 A04414 A A06613 A06614 A A08813 A08814 A A10113 A10114 A A12113 A12114 A A16113 A16114 A16115 AN MALE TO NPT FEMALE ADAPTER FITTINGS AN NPT Black Blue Clear Steel Black Steel 3 1/8 B318F3 B318F4 B318F5 B318F7 B318F8 3 1/4 B314F3 B314F4 B314F5 4 1/8 B418F3 B418F4 B418F5 B418F7 B418F8 4 1/4 B414F3 B414F4 B414F5 90 FLARE WITH PORT FLARE TEE'S WITH PORT AN Black Blue Clear 6 A A A AN Black Blue Clear 6 A A A A A A A A A A A A A A A

54 FUEL SYSTEM FEMALE HARD TUBE FITTING AN Hard Tube Size Red/Blue Black Clear 4 1/4 F34142 F34143 F /16 F F F /8 F F F /2 F F F /8 F F F MALE HARD TUBE FITTINGS AN Hard Tube Size Red/Blue Black Clear 4 1/4 F4142 F4143 F /16 F F F /8 F F F /2 F F F /8 F F F REPLACEMENT FERRULES FOR HARD TUBE FITTINGS New Style REPLACEMENT FERRULES FOR HARD TUBE FITTINGS Old Style Pkg of 5 Tube Brass 1/4 F /16 F /8 F /2 F /8 F Pkg of 5 Tube Brass 1/4 5/16 3/8 F /2 F /8 F

55 MALE Y FITTINGS FUEL SYSTEM Size Size Size Black Blue Clear F33333 F33334 F F34333 F34334 F F34443 F34444 F F36443 F36444 F F36063 F36064 F F38663 F38664 F F38883 F38884 F F31883 F31884 F F31113 F31114 F F32113 F32114 F F32223 F32224 F F F F FEMALE Y BLOCKS Size Size Size Black Blue Clear 1/8 1/8 1/8 F63333 F63334 F F66063 F66064 F F68663 F68664 F F68883 F68884 F F61883 F61884 F F61113 F61114 F61115 FUEL CELL BULKHEADS PTFE WASHERS Includes PTFE Washers Size Black Blue Clear 6 F90063 F90064 F F90083 F90084 F F90103 F90104 F F90123 F90124 F F90163 F90164 F90165 Pkg of 2 Size 6 F F F F F

56 FUEL SYSTEM Phenix Industries is pleased to announce the release of a new modular fuel filter design. Whether you are using the filter for a street Honda or a blown fuel motor, this will do the job. You select the inlet size from 6 to 12 and the outlet size from 6 to 12 based on what your engine needs. No ORB fi ngs to buy in addi on to the filter, the male AN is machined onto the filter caps, along with four choices of filter media: 100, 60, 30 or 10 micron. All filter elements in stainless steel mesh so they can be cleaned and used indefinitely. SELECT-FLO FUEL FILTERS SELECT-FLO DUAL STAGE FUEL FILTERS Inlet Size Outlet Size Black 6 6 F F F F F F F F F F Add /10 /30, /60 or /100 to the end of the part number to specify what micron fuel filter element you want. Example: F /30 would be 10 inlet, -8 outlet, color black with a 30 micron element. Available in 100, 60, 30 and 10 micron stainless elements. Inlet Size Outlet Size Black 6 6 F F F F F F F F F F Phenix has developed a new dual stage fuel filter. One filter, two chambers with separate filter elements. This will allow you to filter the fuel in the first chamber to remove all the larger debris and then fine filter the fuel in the second chamber down to 30 micron. To order, pick your inlet and outlet sizes, then your elements. Example: F /60/30 is dual stage, 10 inlet, 8 outlet, black with a 60 micron 1st stage and 30 micron 2nd stage. Available in 100, 60, 30 and 10 micron stainless elements. FILTER MOUNTING BRACKET Descrip on Type A F32110 Type B F32120 Tube Mount 11/2" F32130 Tube Mount 15/8" F32140 Tube Mount 13/4" F

57 FUEL SYSTEM IN-LINE 40 MICRON COMPACT FILTER Size Size Black Blue Clear 4 21/2 F F F /2 F F F /8 F F F IN-LINE 40 MICRON COMPACT PUSH-LOK FILTER Size Size Black Blue Clear 5/16 3 F F F /8 31/16 F F F /2 33/8 F F F TECH TIP Our fuel filters are designed to be used in conjunction with each other. The Primary filter should be placed between the tank and the pump and will collect all of the major debris before it has a chance to damage the pump. The Compact In Line filter should be placed between the fuel pump and the carburetor or injector nozzles. This is a 40 micron stainless mesh screen type filter which should be cleaned on a regular basis. REPLACEMENT FILTER PARTS Descrip on 40 Micron Filter F79000 ORing FKM All F

58 FUEL SYSTEM ONE WAY CHECK VALVES PISTON AND SPRING TYPE CHECK VALVE FOR BOSCH 044 FUEL PUMP Size Black Blue Clear 6 F32363 F32364 F F32383 F32384 F F F F F F F F F F Includes Crush Washer Outlet Inlet Black 6 12 MM x 1.5 F MM x 1.5 F FUEL CELL ROLLOVER VALVE Size Red Black Blue Clear 6 F32263 F32264 F F32281 F32283 F32284 F F F F F F F F F F IN-LINE FUEL SHUT-OFF VALVE Size Black Blue Clear 4 F32443 F32444 F F32463 F32464 F F32483 F32484 F F F F F F F F F F

59 Phenix is pleased to offer our 4lb 2oz lightweight water pump. Each 20 gpm water pump comes with the necessary electrical wiring. Op onal moun ng brackets are also available for purchase separately. Like any other quality mechanical device, proper installa on and maintenance of the pump will provide a long life of worryfree performance. TECH TIP A dirty cooling system will not only damage the pump, but it does not remove heat as efficiently from the engine. Particles suspended in the coolant (rust, dirt, machining residue, etc.) have been known to prematurely wear impellers, and cause seal failure. Flush the entire cooling system before installing the pump. This should be done after any modifications to the cooling system (changing fittings, hoses, etc.), as those modifications can loosen dirt and rust in the engine, heater core, or radiator. It is always good practice to flush the radiator after the vehicle has been sitting for more than four weeks. Always install the pump so that it can drain completely when the cooling system is drained. This will help rid the pump of dirt and debris, and will help prevent freeze problems in the winter. COOLING & RADIATOR LIGHTWEIGHT IN-LINE WATER PUMP 20 GPM Descrip on In Line Pump 20 GPM Moun ng Brackets Black Steel R R50217 LS WATER PUMP FITTINGS Descrip on Aluminum LS Weld Bungs for Water Pump 16 X 2.5 Aluminum R

60 BRAKES, CLUTCH & POWER STEERING PREMIUM QUALITY COATED BRAKE LINES WITH STAINLESS CRIMP SLEEVES AND -3 CHROME FITTINGS Length Black Clear 10 G8103 G G8123 G G8143 G G8153 G G8163 G G8173 G G8183 G G8193 G G8203 G G8213 G G8223 G8225 Safety Note: Using aluminum fittings in brake plumbing is not advised for street use and may be illegal depending on where you live. STRAIGHT MALE AN TO NPT BRAKE ADAPTER FITTINGS AN Size Black Blue Clear Steel Black Steel Stainless 3 1/8 NPT B3183 B3184 B3185 B3187 B3188 B /8 NPT B4183 B4184 B4185 B4187 B4188 B DEGREE AN TO NPT BRAKE ADAPTER FITTINGS AN NPT Black Blue Clear Steel Black Steel Stainless 3 1/8 B B B B B B /8 B B B B B

61 BRAKES, CLUTCH & POWER STEERING 90 AN TO NPT BRAKE ADAPTER FITTINGS AN NPT Black Blue Clear Steel Black Steel Stainless 3 1/8 B B B B B B /8 B B B B B US SPEC STRAIGHT MALE AN TO MALE INVERTED FLARE ADAPTERS *Pkg of 2 AN IVF Black Blue Clear Steel Black Steel Stainless 3 3/8x24* G G /16x24* G G /16x20* G G /2x20* G G /16x18* G G /16x20* G G /8x24* G G /16x24* G G G G G G /16x20* G G /8x18* G G G G G G /8x24 G6383 G6384 G6385 G6387 G6388 G /16x24 G6503 G6504 G6505 G6507 G6508 G /2x20 G06503 G06504 G06505 G06507 G06508 G /8x18 G06623 G06624 G06625 G06627 G06628 G /16x18 G06683 G06684 G06685 G06687 G06688 G /2x20 G08503 G08504 G08505 G08507 G08508 G /8x18 G08623 G08624 G08625 G08627 G08628 G

62 BRAKES, CLUTCH & POWER STEERING STRAIGHT AN MALE TO MALE INV FLARE METRIC ADAPTERS ALUMINUM AN IVF Black Blue Clear 6 14MMx1.5 G G G MMx1.5 G G G MMx1.5 G G G MMx1.5 G G G MMx1.5 G G G MMx1.5 G G G STRAIGHT AN MALE TO MALE INV FLARE METRIC ADAPTERS STEEL & STAINLESS AN IVF Steel Black Steel Stainless 3 10MMx1.00 G G G MMx1.25 G G G MMx1.50 G G G MMx1.00 G G G MMx1.25 G G G MMx1.50 G G G MMx1.5 G G G MMx1.5 G G G MMx1.5 G G G MMx1.5 G G G MMx1.5 G G G MMx1.5 G G G

63 BRAKES, CLUTCH & POWER STEERING STEERING RACK AND PUMP O-RING ADAPTER Includes Oring AN Size Steel Black Steel 6 1/2x20 G G /16x18 G G AN MALE TO MALE METRIC O-RING ADAPTER FITTINGS Includes ORing AN Size Black Blue Clear Steel Black Steel 6 14MMx1.5 F64393 F64394 F64395 F64397 F MMx1.5 F66393 F66394 F66395 F66397 F MMx1.5 F68393 F68394 F68395 F68397 F68398 LATE MUSTANG US THREAD 1979 TO 2004 MUSTANG RACK FITTINGS METRIC STAT-O-SEAL AN Size Steel Black Steel 6 9/16x18 G G /8x18 G G AN Size Steel 6 16 MM G MM G GM EARLY STEERING BOX AN IVF Black Blue Clear Steel Black Steel 6 5/8x18 G06623 G06624 G06625 G06627 G /16x18 G06683 G06684 G06685 G06687 G

64 BRAKES, CLUTCH & POWER STEERING GM POWER STEERING FITTINGS 80 AND UP AN Size Black Blue Clear Steel Black Steel 6 16MMx1.5 F66393 F66394 F66395 F66397 F MMx1.5 F68393 F68394 F68395 F68397 F68398 STRAIGHT MALE AN TO MALE INV FLARE METRIC ADAPTERS STRAIGHT AN MALE TO INV FLARE FEMALE NPT ADAPTERS Pkg of 2 AN Size Steel Black Steel 3 10MMx1.0 G G MMx1.25 G G MMx1.50 G G Pkg of 2 AN IVF Steel Black Steel 3 1/8 NPT F F /8x24 F F /16x24 F F /8 NPT F F /4x24 F F /16x24 F F EXHAUST FITTINGS O2 SENSOR BUNG STRAIGHT O2 SENSOR BUNG 45 Size Steel Stainless 18MMx1.5 E18157 E Size Steel Stainless 18MMx1.5 E E

65 STRAIGHT MALE AN TO NPT BRAKE ADAPTER FITTINGS OIL SYSTEM FITTINGS AN NPT Black Blue Clear Steel Black Steel Stainless 3 1/8 B3183 B3184 B3185 B3187 B3188 B /8 B4183 B4184 B4185 B4187 B4188 B41811 OIL GAUGE FITTINGS EXTENDED AN NPT Length Black Blue Clear 3 1/ D79033 D79034 D / D79043 D79044 D79045 STACK PLATE OIL COOLER FITTINGS AN Size Black Blue Clear 4 M22x1.5 A A A M22x1.5 A A A M22x1.5 A A A M22x1.5 A A A M22x1.5 A A A M22x1.5 A A A Team Burn The Most/Riot Squad Lead Driver: Crick Filippi / Follow Driver: Lexis King Photographer: Brandon Hallmark/ Gearbanger Studios 64

66 TRANSMISSION FITTINGS GM PG/TH350/TH400/700R-4/200-4R/ L60E FORD C5/AOD/AODE/4R70W/E40D/4R100 *Pkg of 2 AN Black Blue Clear 6 N6143 N6144 N N8143 N8144 N8145 GM 4L80-6 TO 1/4 NPS EARLY TYPE - SET *Pkg of 2 AN Black Blue Clear 6 N61443 N61444 N61445 GM 4L80-4L UP -6 TO 9/16 NPS - SET *Pkg of 2 AN Black Blue Clear 6 N69163 N69164 N69165 TURBO CHARGER FITTINGS STRAIGHT TURBO OIL RESTRICTOR FITTINGS GARRETT BALL BEARING GT255, GT28R, GT30R, GT35R AN Size Stainless 3 7/16x24 B /16x24 B

67 WELD BUNGS FEMALE WELD BUNGS AN Size Aluminum Steel Stainless 3 3/8x24 D D D /16x20 D D D /16x18 D D D /4x16 D D D /8x14 D D D /16x12 D D D /16x12 D D D /8x12 D D D WELD BUNGS MALE HEX BASE WELD BUNGS MALE ROUND BASE AN Size Aluminum 3 3/8x24 D /16x20 D /16x18 D /4x16 D /8x14 D /16x12 D /16x12 D /8x12 D99200 AN Size Aluminum Steel Stainless 3 3/8x24 D D99037 D /16x20 D D99047 D /16x18 D D99067 D /4x16 D D99087 D /8x14 D D99107 D /16x12 D D99127 D /16x12 D D99167 D /8x12 D D99207 D

68 WELD BUNGS WELD BUNGS FEMALE NPT NPT Aluminum Steel Stainless 1/8 D D D /4 D D D /8 D D D /2 D D D /4 D D D D D D /4 D D D BARB WELD BUNGS AN HOSE ID Aluminum Steel Stainless 4 1/4 D89040 D89047 D /8 D89060 D89067 D /2 D89080 D89087 D /8 D89100 D89107 D /4 D89120 D89127 D WELD BUNG WITH CAP Size Inside Cap Hole Diameter Aluminum Steel Stainless 17/ D D D

69 BILLET CLAMPS BILLET (P) CLAMPS ID Black Blue Clear 3/16 P53163 P53164 P /4 P5143 P5144 P5145 5/16 P55163 P55164 P /8 P5383 P5384 P5385 7/16 P57163 P57164 P /2 P5123 P5124 P5125 9/16 P59163 P59164 P /8 P5583 P5584 P5585 3/4 P5343 P5344 P /16 P P P /16 P P P BILLET HOSE SEPARATORS ID Black Blue Clear 3/16 P63163 P63164 P /4 P6143 P6144 P6145 5/16 P65163 P65164 P /8 P6383 P6384 P6385 7/16 P67163 P67164 P /2 P6123 P6124 P /32 P P P /16 P69163 P69164 P /32 P P P /8 P6583 P6584 P /32 P P P /16 P P P /4 P6343 P6344 P6345 7/8 P6783 P6784 P /16 P P P P613 P614 P615 11/16 P P P

70 BILLET CLAMPS HEX FINISHERS AN ID Black Blue Clear P7043 P7044 P P7063 P7064 P P7083 P7084 P P7103 P7104 P P7123 P7124 P P7163 P7164 P P67203 P7204 P7205 TOOLS, PARTS & SUPPLIES BILLET VISE JAWS DOUBLE ENDED AN WRENCHES -3 TO -20 Black M10013 Phenix Vise Jaws are milled from 6061 aluminum. These protect your fittings from getting scratched during installation and are superior to cast versions. Sold as a set. Black M

71 TOOLS, PARTS & SUPPLIES ADJUSTABLE AN WRENCH O-RINGS FKM Black M10033 AN SIZE ALUMINUM CRUSH WASHERS Pkg of 10 *Pkg of 5 Size 3 D300 4 D400 6 D600 8 D D D D * D2000 METRIC ALUMINUM CRUSH WASHERS AN Size Package Qty Aluminum 3 3/8 10 M /16 10 M /16 5 M /4 5 M /8 5 M /16 5 M /16 2 M /8 2 M91580 Size Package Qty Aluminum 6MM 10 M960 8MM 10 M980 10MM 10 M MM 5 M MM 5 M MM 5 M MM 2 M MM 2 M MM 2 M

72 TOOLS, PARTS & SUPPLIES CUSHION CLAMPS AN Size Package Qty 3 (Hard Line) 3/16 10 M303 3 (PTFE) 1/4 10 M304 4 (PTFE) 5/16 10 M /8 10 M /2 10 M /8 5 M /4 5 M M /8 5 M /4 5 M320 STAINLESS STEEL WORM CLAMPS STAINLESS STEEL T-BOLT CLAMPS Size Package Qty Stainless 4 to 8 1/4 to 5/8 4 M /16 to 3/4 4 M /2 to 7/8 4 M /16 to 11/2 4 M /16 to 13/4 4 M M /16 to 2 2 M /16 to 21/2 2 M43211 Size Stainless 4447MM M MM M MM M MM M MM M MM M MM M MM M MM M MM M MM M MM M MM M

73 72 TECH TIPS

74 TECH TIPS 73

75 FINISHES RED ANODIZED - All red parts are type 2 anodized and bright dip coated as a final step in the anodizing process for added durability and color retention; all red fittings are identified by a 1 at the end of the part number. RED & BLUE ANODIZED - All red & blue parts are type 2 anodized and bright dip coated as a final step in the anodizing process for added durability and color retention; all red & blue parts are identified by a 2 at the end of the part number. BLACK ANODIZED - All black parts are type 2 anodized and bright dip coated as a final step in the anodizing process for added durability and color retention; all black fittings are identified by 3 at the end of the part number. BLUE ANODIZED - All blue parts are type 2 anodized and bright dip coated as a final step in the anodizing process for added durability and color retention; all blue fittings are identified by 4 at the end of the part number. CLEAR ANODIZED - All clear parts are type 2 anodized and bright dip coated as a final step in the anodizing process for added durability and color retention; all clear fittings are identified by 5 at the end of the part number. STEEL - Steel parts are plated in a zinc or Iridite finish for corrosion resistance and used primarily in brake and clutch applications. Steel fittings are identified by a 7 at the end of the part number. BLACK STEEL - Black steel is a new black zinc plating process to meet the demand of black fittings with the high corrosion resistance and strength of steel. Black steel parts are identified by a 8 at the end of the part number. STAINLESS STEEL - Conventional fittings made of steel in brake plumbing and hydraulic applications have a tendency to rust internally and contaminate the hydraulic fluids. Using Stainless Steel is one more way to add reliability to our systems. All Stainless fittings are identified by a 11 at the end of the part number WARRANTY All products are sold with a one (1) year limited warranty against defects in materials or workmanship. These parts are designed to be used off-road by professional crews in the field of racing. This warranty will not exceed the original purchase price of the goods. Any defective parts should be returned to Dealer where purchased. This warranty does not apply to any products subject to damage in transit, accident or misuse or abuse following the date of original purchase. Phenix Industries will not be liable for loss, damage, or injury from the use of these products. Racing by the nature of the business is a dangerous pursuit and the user is responsible for determining the suitability of the product and assumes all responsibility for its use. 74