Catalog JR(H/V)54(B/B+)

Transcription

1 Catalog JR(H/V)54(B/B+) JAKKA heat recovery unit JAK-KA GROUP septembar J.8.Г

2 Content Description... 2 Product range... 3 Why the heat recovery is important?... 4 Dimensions... 5 Technical Data Configuration Control Smart Installation and accessories Jakka Group se trudi da tehničke karakteristike, opisi, fotografije i cene u katalozima i cenovnicima budu što tačniji, ali ne možemo da garantujemo da su sve informacije kompletne i bez grešaka. S toga Vas molimo, u cilju bolje saradnje, da pre konačne odluke proverite podatke sa prodavcem sa kojim sarađujete, kako bismo izbegli moguće greške. Jakka Group zadržava pravo promene svih informacija u katalozima, uputstvima i cenovnicima bez prethodne najave. 1

3 JAKKA Heat recovery units JR(H/V)54(B/B+) Description The heat recovery units JAKKA are designed for installation in: B B Construction of anodized aluminium profiles. Side panels produced in two versions: - Single panel with inner insulation (13mm - indoor installation); standard for 400, 600, 1000, 2000, 3000 and 3600 models. - Duoble panels "sandwich" insulation (25mm - outdoor installation); standard for 4200, 6000 and 8000 models. There is possibility to change the directions of fresh and exhausted air by changing the place of the side panels (see p.17). Drain connection is located at the bottom side. m 3 /h

4 Product range JAKKA Heat recovery units JR(H/V)54(B/B+) Product range of 9 JR(H/V)54(B/B+) models cover air flows from 250 up to 8500 m3/h Heat recovery units could bedesigned as monoblock ( ) or as spil systems ( ), allowing easy transport and installation. Acoording to the room specificationsthey could be produced for horiyontal or vertical installation JRH54(B/B+) JRH54(B/B+) H JRH54(B/B+) BS JRH54(B/B+) HBS JRV54(B/B+) JRV54(B/B+) H JRV54(B/B+) BS JRV54(B/B+) HBS JR(H/V)54(B/B+)/ Configuration: A, B, C or D (see p. 18) H - model with water heat exchanger BS - model with by-pass HBS - model with by-pass and water heat exchanger s - 400, 600, 1000, 2000, 3000, 3600, 4200, 6000 and 8000 B - standard recuperator B+ - recuperator with higher efficiency (up to 65%) H - horizontal installation V - vertical installation 3

5 JAKKA Heat recovery units JR(H/V)54(B/B+) Why the heat recovery is important? 4

6 Dimensions JAKKA Heat recovery units JR(H/V)54(B/B+) JRH54(B/B+) Horizontal installation Monoblock unit JRH54(B/B+)/ JRH54(B/B+)/ JRH54(B/B+)/ JRH54(B/B+)/ JRH54(B/B+)/ JRH54(B/B+)/ JRH54(B/B+)/ JRH54(B/B+) Horizontal installation Split unit JRH54(B/B+)/ JRH54(B/B+)/ Side panels of the supply and suction side of the unit are interchanngable. In this way, if is possible to make different configurations (see p. 17). As standard this units are produced with rectangular connections. We reserve the right to introduce alternations both in design and technical data without prior notice, due to continued product develepment. 5

7 JAKKA Heat recovery units JR(H/V)54(B/B+) Dimensions JRV54(B/B+) Vertical installation Monoblock unit JRV54(B/B+)/ JRV54(B/B+)/ JRV54(B/B+)/ JRV54(B/B+)/ JRV54(B/B+)/ JRV54(B/B+)/ JRV54(B/B+)/ JRV54(B/B+) Vertical installation Split unit JRV54(B/B+)/ JRV54(B/B+)/ Side panels of the supply and suction side of the unit are interchanngable. In this way, if is possible to make different configurations (see p. 17). As standard this units are produced with rectangular connections. We reserve the right to introduce alternations both in design and technical data without prior notice, due to continued product develepment. 6

8 Dimensions JAKKA Heat recovery units JR(H/V)54(B/B+) JRH54(B/B+) H Horizontal installation Monoblock unit JRH54(B/B+)/ JRH54(B/B+)/ JRH54(B/B+)/ JRH54(B/B+)/ JRH54(B/B+)/ JRH54(B/B+)/ JRH54(B/B+)/ JRH54(B/B+) H Horizontal installation Split unit JRH54(B/B+)/ JRH54(B/B+)/ Side panels of the supply and suction side of the unit are interchanngable. In this way, if is possible to make different configurations (see p. 17). As standard this units are produced with rectangular connections. We reserve the right to introduce alternations both in design and technical data without prior notice, due to continued product develepment. 7

9 JAKKA Heat recovery units JR(H/V)54(B/B+) Dimensions JRV54(B/B+) H Vertical installation Monoblock unit JRV54(B/B+)/ JRV54(B/B+)/ JRV54(B/B+)/ JRV54(B/B+)/ JRV54(B/B+)/ JRV54(B/B+)/ JRV54(B/B+)/ JRV54(B/B+) H Vertical installation Split unit JRV54(B/B+)/ JRV54(B/B+)/ Side panels of the supply and suction side of the unit are interchanngable. In this way, if is possible to make different configurations (see p. 17). As standard this units are produced with rectangular connections. We reserve the right to introduce alternations both in design and technical data without prior notice, due to continued product develepment. 8

10 Dimensions JAKKA Heat recovery units JR(H/V)54(B/B+) JRH54(B/B+) BS Horizontal installation Monoblock unit JRH54(B/B+)/400 BS JRH54(B/B+)/600 BS JRH54(B/B+)/1000 BS JRH54(B/B+)/2000 BS JRH54(B/B+)/3000 BS JRH54(B/B+)/3600 BS JRH54(B/B+)/4200 BS JRH54(B/B+) BS Horizontal installation Split unit JRH54(B/B+)/6000 BS JRH54(B/B+)/8000 BS Side panels of the supply and suction side of the unit are interchanngable. In this way, if is possible to make different configurations (see p. 17). As standard this units are produced with rectangular connections. We reserve the right to introduce alternations both in design and technical data without prior notice, due to continued product develepment. 9

11 JAKKA Heat recovery units JR(H/V)54(B/B+) Dimensions JRV54(B/B+) BS Vertical installation Monoblock unit JRV54(B/B+)/400 BS JRV54(B/B+)/600 BS JRV54(B/B+)/1000 BS JRV54(B/B+)/2000 BS JRV54(B/B+)/3000 BS JRV54(B/B+)/3600 BS JRV54(B/B+)/4200 BS JRV54(B/B+) BS Vertical installation Split unit JRV54(B/B+)/6000 BS JRV54(B/B+)/8000 BS Side panels of the supply and suction side of the unit are interchanngable. In this way, if is possible to make different configurations (see p. 17). As standard this units are produced with rectangular connections. We reserve the right to introduce alternations both in design and technical data without prior notice, due to continued product develepment. 10

12 Dimensions JAKKA Heat recovery units JR(H/V)54(B/B+) JRH54(B/B+) HBS Horizontal installation Monoblock unit JRH54(B/B+)/400 HBS JRH54(B/B+)/600 HBS JRH54(B/B+)/1000 HBS JRH54(B/B+)/2000 HBS JRH54(B/B+)/3000 HBS JRH54(B/B+)/3600 HBS JRH54(B/B+)/4200 HBS JRH54(B/B+) HBS Horizontal installation Split unit JRH54(B/B+)/6000 HBS JRH54(B/B+)/8000 HBS Side panels of the supply and suction side of the unit are interchanngable. In this way, if is possible to make different configurations (see p. 17). As standard this units are produced with rectangular connections. We reserve the right to introduce alternations both in design and technical data without prior notice, due to continued product develepment. 11

13 JAKKA Heat recovery units JR(H/V)54(B/B+) Dimensions JRV54(B/B+) HBS Vertical installation Monoblock unit JRV54(B/B+)/400 HBS JRV54(B/B+)/600 HBS JRV54(B/B+)/1000 HBS JRV54(B/B+)/2000 HBS JRV54(B/B+)/3000 HBS JRV54(B/B+)/3600 HBS JRV54(B/B+)/4200 HBS JRV54(B/B+) HBS Vertical installation Split unit JRV54(B/B+)/6000 HBS JRV54(B/B+)/8000 HBS Side panels of the supply and suction side of the unit are interchanngable. In this way, if is possible to make different configurations (see p. 17). As standard this units are produced with rectangular connections. We reserve the right to introduce alternations both in design and technical data without prior notice, due to continued product develepment. 12

14 Technical Data JAKKA Heat recovery units JR(H/V)54(B/B+) JR(H/V)54(B/B+)/400 Recuperativ heat exchanger B Recuperativ heat exchanger B+ JR(H/V)54(B/B+)/600 Recuperativ heat exchanger B Recuperativ heat exchanger B+ JR(H/V)54(B/B+)/1000 Recuperativ heat exchanger B Recuperativ heat exchanger B+ 13

15 JAKKA Heat recovery units JR(H/V)54(B/B+) Technical Data JR(H/V)54(B/B+)/2000 Recuperativ heat exchanger B Recuperativ heat exchanger B+ JR(H/V)54(B/B+)/3000 Recuperativ heat exchanger B Recuperativ heat exchanger B+ JR(H/V)54(B/B+)/3600 Recuperativ heat exchanger B Recuperativ heat exchanger B+ 14

16 Technical Data JAKKA Heat recovery units JR(H/V)54(B/B+) JR(H/V)54(B/B+)/4200 Recuperativ heat exchanger B Recuperativ heat exchanger B+ JR(H/V)54(B/B+)/6000 Recuperativ heat exchanger B Recuperativ heat exchanger B+ JR(H/V)54(B/B+)/8000 Recuperativ heat exchanger B Recuperativ heat exchanger B+ 15

17 JAKKA Heat recovery units JR(H/V)54(B/B+) Technical Data JR(H/V)54(B/B+)/400 JR(H/V)54(B/B+)/600 JR(H/V)54(B/B+)/1000 JR(H/V)54(B/B+)/2000 JR(H/V)54(B/B+)/3000 JR(H/V)54(B/B+)/3600 JR(H/V)54(B/B+)/4200 JR(H/V)54(B/B+)/6000 JR(H/V)54(B/B+)/

18 Configuration JAKKA Heat recovery units JR(H/V)54(B/B+) Note: The configurations mentioned above (A to D) are not relevant for models JR(H/V)54(B/B+)/6000 and For more information please contact the manufacturer. We reserve the right to introduce alternation both in design and technical data without prior notice due to continued product development. 17

19 JAKKA Heat recovery units JR(H/V)54(B/B+) Control FAN CONTROL - Only fan speed control (two controls per unit) - Bypass valve operates automatically, according to signals T1 and T2. - The pre-heater turns on automatically on signal for freezing. Speed controllers REM-2,5 N - up to 2,5A REM-5 - up to 5A REM-10 - up to 10A S&P COM-3 (3V switch) Frequency inverter SINUS N 1,5-1,8kW - up to 8A SINUS M 1,5kW - up to 4A SINUS N 2,2-3,0KW - up to 12A SINUS M 2,2kW - up to 6A REM -2,5N REM-5 and REM-10 S&P COM-3 SINUS N / SINUS M 18

20 Smart JAKKA Heat recovery units JR(H/V)54(B/B+) HIG-2 (dodatak za Smart) - Adjustable humidistat enables the automatic ON/OFF operation of an extract fan by monitoring the relative humidity level. Adjustable RH level 40-90%, and adjustable timer. - Bypass valve operates automatically, according to signals T1 and T2. - The pre-heater turns on automatically on signal for freezing. SQA (dodatak za Smart) - Air quality sensor with integrated adjustable timer (1-25min). The unit allows to se a level of polution of enviroment, when the fan turns on and duration of the operation period. - Bypass valve operates automatically, according to signals T1 and T2. - The pre-heater turns on automatically on signal for freezing. HIG-2 controller SQA controller 19

21 JAKKA Heat recovery units JR(H/V)54(B/B+) Installation and accessories 20

22 JAKKA Heat recovery units JR(H/V)54(B/B+) Heat recovery unit JR(H/V)54(B/B+) with eficinecy up to 65%. 21

23 JAK-KA GROUP - SRBIJA adresa: Bulevar Zorana Đinđića Novi Beograd, Srbija telefon: +381 (0) faks: +381 (0) web: jakkagroup@jakkagroup.com JAK-KA GROUP - CRNA GORA adresa: V Crnogorske brigade Igalo, Crna Gora telefon: +382 (0) faks: +382 (0) mobilni: +382 (0) web: technoclima-mare@t-com.me