Válvulas Industriales. Válvulas de globo Válvulas de Compuerta Válvulas de Retención
|
|
|
- Amie Porter
- 6 years ago
- Views:
Transcription
1 Válvulas Industriales Válvulas de globo Válvulas de Compuerta Válvulas de Retención Ctra. Rubí-Sabadell, km.13, nave 86 CP Rubí (Barcelona) T F E grm@vigrm.com W
2 Válvulas de globo 200 AE/BE PN DN Material PN ) )3)4) )3)4) )3)4) )3)4) ) ) ) ) ) Application at more than 400 C operating temperature only admissible if no intercrystalline corrosion has to be expected. 3) At operating temperature 400 C the material of the screws is ) In case of screws A4-70 with > 8 x d screw-length the mechanical strength properties acc. to table 6 of DIN 267 Part 11 have been considered. 5) Butt welding ends
3 Válvulas de globo Shut-off check valve 200 AE/BE PN DN Válvulas Retención De piston 240 MT PN DN Material PN ) ) ) , ) , ) , ) ) ) ) , , , , , , , , , ) At temperature > 50 C only applicable for short-time service. 3) PN 160 is only valid for DN ) Only for globe valves DN 65-80; for lift check valves DN Permissible differential pressure (pressure inlet below the disc) acc. to EN
4 Válvulas de globo Alta presión HD JM PN 320 DN 10-65/50 Material PN ) 590 2) 600 2) ) ) For temperatures > 570 C, stem in and hightemperature-packing.
5 Válvulas de globo Alta Presión HD LM PN 500 DN Material PN ) 590 2) 600 2) 610 2) 620 2) 630 2) 640 2) 650 2) ) ) ) ) For temperatures > 570 C, stem in and hightemperature-packing.
6 Válvulas de globo Alta presión HD BM PN 630 (320) DN 10-65/50 3) Material PN ) 590 5) 600 5) ) ) ) ) ) ) ) ) At operating temperature > 450 C the material of nuts for Pos. 192 is respectively ) In case of calculation for valves with butt weld ends acc. to DIN 3239 part 1 for nominal pressure class PN 630 the connection d3 with the wall thickness has been considered as minimum dimension without corrosion surcharge. 4) In case of mat the application at more then 400 C is admissible if no intercrystalline corrision has to be expected. 5) For temperatures > 570 C, hightemperature-packing.
7 Válvulas de globo Alta presión DVA 200 AZ/BZ PD 25 DN Material PD
8 Válvula Compuerta 808 GJ PN DN Material PN ) ) At temperature > 50 C only applicable for short-time service.
9 Válvula Compuerta 800/808 GJ Class 800 (PN 10-40) 1 /2" - 2" (DN 15-50) Material PN Material , , ,5 343, ,5 454, ASTM A 105 Class ,2 136,2 124,1 120,7 116,6 110,0 100,7 98,6 97,9 92,7 75,9 49,3 31,7 19,0 9,7
10 Válvula Compuerta 700 HJ/JJ (GA PN 10-40) PN DN Tabla de presión DIN 2401 Material PN ,0 16,0 16,0 15,0 14,0 13,0 11,0 10,0 8, ,0 25,0 25,0 23,0 22,0 20,0 17,0 16,0 13, ,0 40,0 40,0 37,0 35,0 32,0 28,0 24,0 21, ) 10,0 10,0 10,0 9,6 8,8 8,1 6,9 6,3 5, ,0 16,0 16,0 15,3 14,0 13,0 11,0 10,0 8, ,0 25,0 25,0 23,9 22,0 20,0 17,0 16,0 13, ,0 40,0 40,0 38,1 35,0 32,0 28,0 24,0 21, ,0 63,0 63,0 58,1 50,0 45,0 40,0 36,0 32, ,0 100,0 100,0 92,5 80,0 70,0 60,0 56,0 50, )4) 10 2) 10,0 10,0 10,0 10,0 10,0 9,0 8,0 7,0 16 2) 16,0 16,0 16,0 16,0 15,0 14,0 13,0 11,0 25 2) 25,0 25,0 25,0 25,0 24,0 22,0 20,0 17,0 40 2) 40,0 40,0 40,0 40,0 39,0 35,0 31,0 28,0 63 2) 63,0 63,0 63,0 63,0 61,0 55,0 49,0 44, ) 100,0 100,0 100,0 100,0 96,0 88,0 79,0 70, ) 10,0 10,0 10,0 10,0 10,0 10,0 8,8 8,0 7,6 7,2 6,8 16 2) 16,0 16,0 16,0 16,0 16,0 16,0 14,1 12,8 12,2 11,5 10, ,0 25,0 25,0 25,0 25,0 25,0 22,0 20,0 19,0 18,0 17, ,0 40,0 40,0 40,0 40,0 40,0 35,0 31,0 30,0 29,0 28, ,0 63,0 63,0 63,0 63,0 63,0 56,0 50,0 47,0 46,0 45, ,0 100,0 100,0 100,0 100,0 100,0 87,0 78,0 74,0 72,0 70, ) 10,0 10,0 10,0 10,0 10,0 10,0 10,0 9,6 9,2 8,8 8,4 8,0 7,2 6,0 4,8 3,6 16 2) 16,0 16,0 16,0 16,0 16,0 16,0 16,0 15,4 14,7 14,1 13,4 12,8 11,5 9,6 7,7 5, ,0 25,0 25,0 25,0 25,0 25,0 25,0 24,0 23,0 22,0 21,0 20,0 18,0 15,0 12,0 9, ,0 40,0 40,0 40,0 40,0 40,0 40,0 38,0 36,0 35,0 34,0 33,0 29,0 24,0 19,0 15, ,0 63,0 63,0 63,0 63,0 63,0 63,0 61,0 58,0 57,0 56,0 53,0 47,0 40,0 32,0 25, ,0 100,0 100,0 100,0 100,0 100,0 100,0 95,0 91,0 89,0 87,0 82,0 74,0 62,0 49,0 38, ) 10,0 10,0 10,0 10,0 10,0 10,0 10,0 9,5 9,1 8,9 8,7 8,3 7,4 6,3 5,0 4,4 3,8 3,3 16 2) 16,0 16,0 16,0 16,0 16,0 16,0 16,0 15,2 14,6 14,2 13,9 13,2 11,8 10,0 7,9 7,0 6,0 5,2 25 2) 25,0 25,0 25,0 25,0 25,0 25,0 25,0 23,8 22,8 22,3 21,8 20,6 18,4 15,6 12,4 10,9 9,4 8,1 40 2) 40,0 40,0 40,0 40,0 40,0 40,0 40,0 38,0 36,4 35,6 34,8 33,0 29,5 25,0 19,8 17,4 15,1 13,0 63 2) 63,0 63,0 63,0 63,0 63,0 63,0 63,0 60,8 58,2 57,0 55,7 52,8 47,2 40,0 31,7 27,8 24,2 20, ) 100,0 100,0 100,0 100,0 100,0 100,0 100,0 95,0 91,0 89,0 87,0 82,5 73,8 62,5 49,5 43,5 37,8 32,5 2) Pressure rating not applicable in design code 3) In case of stainless steel bolts (DIN material code A4-70) with > 8 x d bolt length the strength characteristics acc. to table 6 of DIN 267 part 11 have been considered. 4) At temperature > 50 C only applicable for short time service.
11 Válvula Compuerta 700 HJ/JJ (GA PN 10-40) PN DN Material PN ,0 16,0 16,0 14,8 14,0 13,3 12,1 11,0 10,2 9,5 5, ,0 25,0 25,0 23,2 22,0 20,8 19,0 17,2 16,0 14,8 8, ,0 40,0 40,0 37,1 35,2 33,3 30,4 27,6 25,7 23,8 13, ,0 10,0 10,0 9,2 8,8 8,3 7,6 6,9 6,4 5,9 3, ,0 16,0 16,0 14,8 14,0 13,3 12,1 11,0 10,2 9,5 5, ,0 25,0 25,0 23,2 22,0 20,8 19,0 17,2 16,0 14,8 8, ,0 40,0 40,0 37,1 35,2 33,3 30,4 27,6 25,7 23,8 13, ,0 63,0 63,0 58,5 55,5 52,5 48,0 43,5 40,5 37,5 20, ,0 100,0 100,0 92,8 88,0 83,3 76,1 69,0 64,2 59,5 32, ,0 10,0 10,0 10,0 10,0 10,0 9,7 8,5 8,0 7,4 6,9 6,4 5,9 5,4 4,9 4,4 3,5 2,8 2, ,0 16,0 16,0 16,0 16,0 16,0 15,6 13,7 12,9 11,9 11,0 10,2 9,4 8,6 7,8 7,0 5,6 4,4 3, ,0 25,0 25,0 25,0 25,0 25,0 24,4 21,4 20,2 18,6 17,2 16,0 14,7 13,5 12,3 11,0 8,8 7,0 5, ,0 40,0 40,0 40,0 40,0 40,0 39,0 34,2 32,3 29,9 27,6 25,6 23,6 21,6 19,7 17,7 14,0 11,2 8, ,0 63,0 63,0 63,0 63,0 63,0 61,5 54,0 51,0 47,1 43,5 40,3 37,2 34,1 31,0 27,9 22,2 17,7 14, ,0 100,0 100,0 100,0 100,0 100,0 97,6 85,7 80,9 74,7 69,0 64,0 59,1 54,2 49,2 44,2 35,2 28,0 22, ,0 10,0 10,0 10,0 10,0 10,0 10,0 10,0 9,5 9,0 8,4 8,0 7,6 7,2 6,8 6,5 5,5 4,4 3,7 2,9 2,3 1,9 1, ,0 16,0 16,0 16,0 16,0 16,0 16,0 16,0 15,2 14,4 13,4 12,8 12,1 11,5 10,8 10,4 8,8 7,1 5,9 4,6 3,7 3,0 2, ,0 25,0 25,0 25,0 25,0 25,0 25,0 25,0 23,8 22,5 21,0 20,0 19,0 18,0 17,0 16,3 13,8 11,1 9,3 7,2 5,8 4,7 3, ,0 40,0 40,0 40,0 40,0 40,0 40,0 40,0 38,0 36,0 33,7 32,0 30,4 28,8 27,2 26,0 22,0 17,9 14,8 11,6 9,3 7,6 6, ,0 63,0 63,0 63,0 63,0 63,0 63,0 63,0 60,0 56,7 53,1 50,5 47,9 45,4 42,8 41,1 34,8 28,2 23,4 18,3 14,7 12,0 9, ,0 100,0 100,0 100,0 100,0 100,0 100,0 100,0 95,2 90,0 84,2 80,2 76,1 72,0 68,0 65,2 55,2 44,7 37,1 29,0 23,3 19,0 15, ,0 10,0 10,0 10,0 10,0 10,0 10,0 10,0 9,7 9,2 8,8 8,3 7,8 7,3 6,9 6,4 5,6 4,9 4,2 3,7 3,2 2,7 2,4 2,0 1,8 1, ,0 16,0 16,0 16,0 16,0 16,0 16,0 16,0 15,6 14,8 14,0 13,3 12,5 11,8 11,0 10,2 8,9 7,8 6,8 5,9 5,1 4,4 3,8 3,3 2,8 2, ,0 25,0 25,0 25,0 25,0 25,0 25,0 25,0 24,4 23,2 22,0 20,8 19,6 18,4 17,2 16,0 14,0 12,2 10,7 9,2 8,0 6,9 6,0 5,2 4,5 4, ,0 40,0 40,0 40,0 40,0 40,0 40,0 40,0 39,0 37,1 35,2 33,3 31,4 29,5 27,6 25,7 22,4 19,6 17,1 14,8 12,9 11,0 9,7 8,3 7,2 6, ,0 63,0 63,0 63,0 63,0 63,0 63,0 63,0 61,5 58,5 55,5 52,5 49,5 46,5 43,5 40,5 35,4 30,9 27,0 23,4 20,4 17,4 15,3 13,2 11,4 10, ,0 100,0 100,0 100,0 100,0 100,0 100,0 100,0 97,6 92,8 88,0 83,3 78,5 73,8 69,0 64,2 56,1 49,0 42,8 37,1 32,3 27,6 24,2 20,9 18,0 16,1 Tabla de Presión DIN EN
12 Válvula Compuerta 700 HJ/JJ (GA PN 10-40) PN DN Material PD ,0 10,0 10,0 10,0 10,0 9,7 8,5 7,5 6,4 5,9 4,9 4,6 4,4 4,2 3,9 3,5 2,9 2,4 1,6 16,0 16,0 16,0 16,0 15,1 13,2 11,8 10,2 9,5 7,6 7,3 6,9 6,5 6,1 5,4 4,5 3,7 2,5 25,0 25,0 25,0 25,0 24,5 21,5 19,2 16,1 14,8 12,4 11,8 11,2 10,6 10,0 8,8 7,4 6,1 4,0 40,0 40,0 40,0 40,0 39,5 34,6 30,9 27,6 23,8 20,0 19,0 18,0 17,1 16,1 14,2 11,9 9,8 6,3 63,0 63,0 63,0 63,0 60,3 52,7 47,1 40,5 37,5 30,5 29,0 27,5 26,0 24,5 21,7 18,1 14,9 10,0 100,0 100,0 100,0 100,0 94,0 82,0 74,0 64,2 59,5 48,0 45,0 43,0 41,0 38,0 34,0 28,0 23, )3) 1,0 10,0 10,21 10,21 10,0 10,0 9,0 8,0 7,0 1,6 16,0 16,3 16,3 16,0 15,0 14,0 13,0 11,0 2,5 25,0 25,5 25,5 25,0 24,0 22,0 20,0 17,0 4,0 40,0 40,8 40,8 40,0 39,0 35,0 31,0 28,0 6,3 63,0 64,3 64,3 63,0 61,0 55,0 49,0 44,0 10,0 100,0 102,1 102,1 100,0 96,0 88,0 79,0 70,0 Tabla de presión ,0 12,0 12,0 12,0 12,0 11,5 10,6 9,1 8,8 8,5 8,4 8,3 8,3 8,2 8,2 8,1 8,0 8,0 7,0 5,4 4,1 3,3 2,6 1,6 19,0 19,0 19,0 19,0 17,9 16,5 14,2 13,7 13,2 13,1 13,0 12,9 12,8 12,7 12,6 12,5 12,5 10,9 8,5 6,5 5,1 4,1 2,5 30,0 30,0 30,0 30,0 29,1 26,8 23,0 22,2 21,5 21,3 21,2 21,0 20,9 20,7 20,5 20,4 20,2 17,7 13,8 10,5 8,3 6,6 4,0 48,0 48,0 48,0 48,0 47,0 43,2 37,1 35,8 34,6 34,4 34,1 33,9 33,6 33,4 33,1 32,9 32,6 28,5 22,2 16,9 13,3 10,7 6,3 77,0 77,0 77,0 77,0 71,6 65,9 56,5 54,6 52,7 52,4 52,0 51,6 51,2 50,9 50,5 50,1 49,7 43,4 33,9 25,8 20,3 16,3 10,0 120,0 120,0 120,0 120,0 112,0 103,0 88,0 85,0 82,0 82,0 81,0 81,0 80,0 79,0 79,0 78,0 78,0 68,0 53,0 40,0 32,0 25, ,0 12,0 12,0 12,0 12,0 12,0 12,1 11,2 10,6 10,0 9,8 9,7 9,6 9,5 9,4 9,3 9,2 9,2 9,1 8,3 7,0 5,5 4,5 3,6 2,8 2,3 1,9 1,6 19,0 19,0 19,0 19,0 19,0 18,9 17,5 16,5 15,6 15,4 15,2 15,0 14,8 14,6 14,5 14,4 14,3 14,2 12,9 10,9 8,6 7,0 5,7 4,4 3,6 2,9 2,5 30,0 30,0 30,0 30,0 30,0 30,0 28,4 26,8 25,3 25,0 24,7 24,4 24,1 23,8 23,6 23,5 23,3 23,2 21,0 17,7 14,0 11,4 9,2 7,2 5,9 4,8 4,0 48,0 48,0 48,0 48,0 48,0 48,0 45,7 43,3 40,8 40,3 39,8 39,3 38,8 38,3 38,1 37,8 37,6 37,3 33,9 28,5 22,5 18,4 14,8 11,6 9,5 7,7 6,3 77,0 77,0 77,0 77,0 77,0 75,3 69,7 65,9 62,2 61,4 60,6 59,9 59,1 58,4 58,0 57,6 57,3 56,9 51,6 43,4 34,4 28,0 22,6 17,6 14,5 11,8 10,0 120,0 120,0 120,0 120,0 120,0 118,0 109,0 103,0 97,0 96,0 95,0 94,0 92,0 91,0 91,0 90,0 89,0 89,0 81,0 68,0 54,0 44,0 35,0 28,0 23,0 18, ,0 12,0 12,0 12,0 12,0 12,0 12,0 12,0 11,2 10,6 10,4 10,3 10,2 10,1 10,0 9,8 9,7 9,6 9,2 8,2 7,1 6,2 5,4 4,7 4,1 3,5 3,1 2,7 2,3 2,0 1,6 19,0 19,0 19,0 19,0 19,0 19,0 19,0 17,0 17,0 16,0 16,0 16,0 16,0 16,0 15,0 15,0 15,0 14,0 13,0 11,0 10,0 8,0 7,0 6,0 5,0 5,0 4,0 4,0 3,0 2,5 30,0 30,0 30,0 30,0 30,0 30,0 30,0 28,0 27,0 27,0 26,0 26,0 26,0 25,0 25,0 25,0 24,0 23,0 21,0 18,0 16,0 14,0 12,0 10,0 9,0 8,0 7,0 6,0 5,0 4,0 48,0 48,0 48,0 48,0 48,0 48,0 48,0 46,0 43,0 43,0 42,0 42,0 41,0 41,0 40,0 40,0 39,0 38,0 33,0 29,0 25,0 22,0 19,0 17,0 14,0 13,0 11,0 9,0 8,0 6,3 77,0 77,0 77,0 77,0 77,0 77,0 75,0 70,0 66,0 65,0 64,0 64,0 63,0 62,0 61,0 61,0 60,0 57,0 51,0 44,0 39,0 34,0 29,0 26,0 22,0 19,0 17,0 14,0 13,0 10,0 120,0 120,0 120,0 120,0 120,0 120,0 118,0 109,0 103,0 102,0 101,0 99,0 98,0 97,0 96,0 95,0 94,0 89,0 79,0 69,0 61,0 53,0 46,0 40,0 34,0 30,0 26,0 22,0 20,0 2) At temperatures > 50 C only applicable for short time service. 3) In case of stainless steel bolts (DIN material code A4-70) with > 8 x d bolt length the strength characteristics acc. to table 6 of DIN 267 part 11 have been considered.
13 Válvula Compuerta 700 HJ/JJ (GA) PN DN Material PN ) ) At temperature > 50 C only applicable for short-time service.
14 Válvula Compuerta 700 HJ/JJ PN DN Material PN , , , , , , , , ) Betriebstemperatur = Berechnungstemperatur minus Temperaturzuschlag nach Regelwerk.
15 Válvula Compuerta 400 JJ PN DN Material PN , , , , , , , ,
16 Válvula Compuerta 700 JJ PN160/PD18 DN /250 FL- Material PN BW- Material PD
17 Válvula Compuerta Alta presión DSK JT PD 10 DN BW- Material PD
18 Válvula Compuerta Alta presión DSK JT PD 10 DN /300 BW- Material PD
19 Válvula Compuerta Alta presión DSK JT PD 10 DN BW- Material PD
20 Válvula Compuerta DSK JT PD DN BW- Material PD Design according to working data PD 63 on request
21 Válvula de Clapeta 640 AA PN DN Material PN
22 Válvula de clapeta 640 AA PN DN Material PN P265GH
23 Válvula Retención de clapeta 640 AA PN (PD 18) DN /250 FL- Material PN FL- Material PN FL- Material PN BW- Material PD
24 Válvula Retención DRI AB PD 25 / PD 40 DN BW- Material PD BW- Material PD
25 Válvula Retención DRI AB PD DN BW- Material PD Design according to working data PD 63 on request
26 Válvula de alta presión tuberia Ciega DPV VW PD 10 DN BW- Material PD
27 Válvula de alta presión tuberia Ciega DPV VW PD DN BW- Material PD Design according to working data PD 63 on request
28 Filtro alta presión 990 ST PN 500 DN 10-65/50 Material PN ,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 537,4 518,8 514,7 510,9 507,3 503,8 500,3 496,7 493,1 489,3 426,9 333,5 253,5 200,1 160, ,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 500,0 426,9 338,0 275,7 222,4 173,4 142,0 116, ,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 500,3 437,3 381,7 333,5 289,1 252,0 214,9 189,0 163,1 140,8 124, ,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 500,0 465,0 430,0 380,0 338,0 298,0 261,0 231,0 198,0 172, ,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 550,0 531,0 459,6 424,4 382,1 333,9 298,7 252,4 218,9
Globe valves Shut-off check valve 200 AE/BE PN DN Globe valves Lift check valve 240 MT PN DN 10-50
Globe valves Shut-off check valve 200 AE/BE PN 10-160 DN 10-50 Globe valves Lift check valve 240 MT PN 10-160 DN 10-50 Admissible operating pressure [bar] at design temperature [ C] 1) Material PN -200-60
Valves for the industry. n Globe valves. n Gate valves. n Swing check valves
Valves for the industry n Globe valves n Gate valves n Swing check valves 6100.1.05.14 n Prolog Industrial valves made by company Stahl-Armaturen PERSTA GmbH are designed according to DIN-Standards, EN-Standards
Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN DN
Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN 10-100 DN 50-150 Admissible operating pressure [bar] at design temperature [ C] Material PN -60-10 20 100 150 200 250 300 350 400 410 420 430 440 450 460
Materials : Carbon steel or stainless steel
Size : Ends : Max Temperature : DN 15 to 600 mm Flanges PN10/16/25/40 + 150 C for flange gaskets, 200 C for flanges Max Pressure : 40 Bars for flanges PN40 Specifications : Welding flanges Flat flanges
High-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN , DN , T max : 550 C
High-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN 63-160, DN 50 150, T max : 550 C Shut-off globe valve (series V30) or shut-off globe valve with control
Data Sheet T EN
Data Sheet T 8015-1 EN Series 240 Types 3241 1 PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve Application Control valves for PSA plants (Pressure Swing Adsorption) Valve sizes DN
ARI-CHECKO -V / -D Check valve ARI-Check valve, metallic sealing
ARI-CHECKO -V / -D Check valve ARI-Check valve, metallic sealing Straight through with flanges (except EN-JL1040) Straight through with flanges Straight through with flanges Angle pattern with flanges
High pressure strainer D71.2
High pressure strainer D71.2 PN 63 250, DN 20 50, T max : 600 C High-pressure strainer D71.2 with flanges or butt weld ends,strainer insert made of stainlees steel, with nonasbestos gasket. Meets the requirements
ARI-CHECKO -V / -D Check valve ARI-Check valve, metallic sealing
ARI-CHECKO -V / -D Check valve ARI-Check valve, metallic sealing Straight through with flanges (except EN-JL1040) Straight through with flanges Straight through with flanges Angle pattern with flanges
STAINLESS STEEL ARES PNEUMATIC ANGLE-SEAT VALVE
FEATURES The stainless steel ARES valve is intended for the automatic shut-off of networks of fluids. The full-bore, inclined-seat body and the excellent flow-rate coefficients allow for very low pressure
Pressure reduction controllers (PN 25) AVDS - for steam AVD - for water
Data sheet Pressure reduction controllers (PN 25) - for steam AVD - for water Description Main data AVD: DN 15-50 k VS 0,4-25 m 3 /h PN 25 Setting range: 1-5 bar / 3-12 bar Temperature: - Circulation water/glycolic
Sempell High Pressure Stop Valves Model VA510 (DIN)
Designed for highest pressure and temperature applications using high alloy or stainless steels. Features T-pattern globe type Body made of forged steel Wear resistant stellite body seat Conical seat with
Strainer. ARI-Strainer. ARI-Strainer Y-pattern with flanges. ARI-Strainer Y-pattern with flanges. ARI-Strainer Y-pattern with butt weld ends
Strainer ARI-Strainer ARI-Strainer Y-pattern with flanges German "TA-Luft" TÜV-Test-No. 922-9204866 TRB 801 No. 45 (except cast iron) Cast iron Nodular iron Cast steel BR 050 Page 2 ARI-Strainer Y-pattern
SITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices. Orifice plate with annular chambers. 4/358 Siemens FI
Application Dimensional drawings Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -60 to +550 C. Design Two support rings with replaceable orifice disk
PN63 - PN160. ARI-STOBU PN Stuffing box valve. Stop valve with gland seal - metallic sealing. ARI-STOBU - Straight through with flanges
Stuffing box valve Stop valve with gland seal - metallic sealing ARI-STOBU - Straight through with flanges PN63 - PN160 Forged steel High temperature steel Fig. 006 Seite 2 ARI-STOBU - Straight through
CONDA-VRC Type Series Booklet
Pressure Reducing Valve PN 16/25/40/63 DN 15-150 Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied,
2 - way valve (NO), pressure relieved (PN 25) VG - external thread VGF - flange
Data sheet 2 - way valve (NO), pressure relieved (PN 25) VG - external thread VGF - flange Description VG and VGF are pressure relieved 2-way normally open (NO) valves, designed to be combined with: -
Motor Valve compact 8230
Motor Valve compact 8230 GS 3 series, DN 15 up to DN 50 Motor valve for control and switching of neutral through to highly aggressive media in process engineering, chemical industries and for plant equipment.
AWH ARMATUREN- WERK HALLE GMBH. Thermodynamic steam trap. Thermodynamic steam trap. Thermodynamic steam trap PN40. Thermodynamic steam trap PN63
TD PN40 - with flanges (Fig. 640/641...1) - with screwed sockets (Fig. 640/641...2) - with socket weld ends (Fig. 640/641...3) - with butt weld ends (Fig. 640/641...4) Forged steel High temperature steel
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ piston actuated 2/2-way diaphragm valve is designed for use in sterile areas of application. All metallic actuator components are made of stainless steel. The
ARI-Check valve. ARI-Check valve, metallic sealing. ARI-Check valve - Straight through with flanges. ARI-Check valve - Straight through with flanges
ARI-Check valve, metallic sealing Straight through with flanges (except EN-JL1040) Grey cast iron SG iron Cast steel Fig. 003/303 Page 2 Straight through with flanges Straight through with flanges Angle
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance actuator. Normally Closed, Normally Open and Double Acting control functions are available.
Cast iron Nodular iron BR 006/306 Page 2. BR 006/306 Page 2. Forged steel BR 006 Page 3. Stainless steel BR 006 Page 3. Forged steel BR 005 Page 5
ARI-STOBU - Stop valve with gland seal STOBU Stop valve with gland seal ARI-STOBU Globe valve with flanges TRB 801 No.45 (except cast iron) ARI-STOBU Globe valve with flanges TRB 801 No.45 Test approvals
Series 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244
Series 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244 Application Versatile control valves with globe or three-way valve
Float-operated condensate pump ARI Condensate pump (mechanical) Displacement: 16,5-20 litres. High temperature steel. Stainless steel.
Float-operated condensate pump ARI Condensate pump (mechanical) Displacement: 16,5-20 litres Condensate pump No electricity required / float-operated PN 16 (82.691) Body: Jacket P235GH-TC, Bottom flanges
Type 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle.
Balanced bellows design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet 54 Spring 14 Split ring 17 Lower spring plate 55 Stud 56 Nut 8 Guide with bushing
ARI-STEVI 440 / 441 DVGW type approval
ARI-STEVI 440 / 441 DVGW type approval Control valve in straightway form for combustible gases DIN-DVGW type approval DN 15-100 ARI-STEVI 440-G / 441-G for electric and pneumatic actuators DIN-DVGW type
Tank Bottom Valve, Metal
Tank Bottom Valve, Metal Construction The 2/2-way metal tank bottom valve GEMÜ is manually operated with a side mounted gear which has an optical position indicator as standard. The stainless steel valve
02. ANGLE PATTERN STOP-CHECK VALVES PN 6, 16, 25 DN , SCREW DOWN, TYPE 31, 32, 33, 41, 42, 43, 53, 63
INDUSTRIAL VALVES INDEX OF INDUSTRIAL VALVES ITEM DESCRIPTION FIGURE STOP CHECK VALVES 01. STRAIGH STOP CHECK VALVES PN 6, 16, 25, 40 DN 15-300, SCREW DOWN, TYPE 31, 32, 33, 41, 42, 43 215 02. ANGLE PATTERN
Pneumatic Butterfly Valve Pfeiffer Type BR 14b/AT
Pneumatic Butterfly Valve Pfeiffer Type BR 14b/AT Application Tight closing, double eccentric butterfly valve for process engineering and plants with industrial requirements Nominal size DN 80 to DN 400
ARI-STEVI 470 / 471 (DN15-150)
With pneumatic and electric actuators ARI-STEVI 470 / 471 (DN15-150) Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem ARI-STEVI 470 / 471 Pneumatic
Control valve - 3-way with flanges (3-way mixing valve / 3-way diverting valve) DN 200 and 250
with electric and pneumatic actuators Control valve - 3-way with flanges (3-way mixing valve / 3-way diverting valve) DN 200 and 250 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches Handwheel
Typetested versions With Type 3213 Globe Valve, unbalanced. With Type 3214 Globe Valve, balanced
Electric Control Valves/Controller with Electric Actuator with safety function, typetested Types 3213/5725, 3214/5725 Single-seated Globe Valve Type 3213, unbalanced Single-seated Globe Valve Type 3214,
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The 601, and manually operated diaphragm valves have a temperature resistant plastic handwheel, 602 has a stainless steel handwheel. Bonnet and internals are made all
Angle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a plastic pneumatic piston actuator. The valve spindle is sealed by a self-adjusting gland packing or a compact
Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The pneumatically operated 2/2 way diaphragm valve GEMÜ is a corrosionresistant all plastic construction. It has a maintenancefree piston actuator which can be controlled
TYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAP00000K3 Revision No: 1 This is to certify: That the Check Valve with type designation(s) 05414, 05417, 05419, 05714, 05717, 05719 Issued to Herose GmbH Armaturen
ARI-STOBU PN16-40 Stuffing box valve Stop valve with gland seal metal seat
ARI-STOBU PN16-40 Stuffing box valve Stop valve with gland seal metal seat Straight through with flanges TRB 801 Annex II No. 45 (except EN-JL1040) (optional) Straight through with flanges TRB 801 Annex
Type 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper
Pressure relief controller for oil V22D28 (PN 16, 25)
Data sheet Pressure relief controller for oil V22D28 (PN 16, 25) Description The controller has a control valve, an actuator with one control diaphragm and a spring for pressure setting. Features: - safe
PN63 - PN160. with electric and pneumatic actuators. Control valve in straightway form with flanges and butt weld ends (shoed ends) DN
with electric and pneumatic actuators Control valve in straightway form with flanges and butt weld ends (shoed ends) DN 15-100 PN63 - PN160 ARI-STEVI 472 Electric actuator ARI-PREMIO Enclosure IP 65 2
CONDA-VLC Type Series Booklet
Level Control Valve PN 16 DN 25-300 Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,
Series 240 Type and Type Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
Pressure relief controller V22 D28
Pressure relief controller V22 D28 For heavy oil and high-viscosity media Instructions for Mounting, Start-up and Maintenance SIBC VI.CB.I1.02 Contents 1. General data Page 1.1 Correct application 1 1.2
Pressure relief controller AVA (PN 25)
Data sheet Pressure relief controller AVA (PN 25) Description AVA is a self-acting pressure relief controller primarily for use in district heating systems. The controller is normally closed and opens
R677. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction All medium wetted parts, the bonnet and handwheel of the GEMÜ 2/2-way diaphragm valve are made of plastic. The low maintenance plastic bonnet has an ergonomically
ARI-FABA LA Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing - long construction
ARI-FABA LA Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing - long construction ARI-FABA LA - Straight through with flanges EN ISO 15848-1 / TA - Luft TÜV-Test-No.
HYDRAULIC CONTROL VALVES
HYDRAULIC CONTROL VALVES The automatic control valves are diaphragm valves designed to provide hydraulically driven solutions to pressure, flow and level control applications. Features: Main valve uses
SITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices Metering pipe with orifice plate and annular chambers 4/369
and annular chambers Application Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -10 to +00 C. Design Orifice plate with annular chambers consisting
PREHEATER BYPASS SYSTEMS
PREHEATER BYPASS SYSTEMS PREHEATER BYPASS SYSTEMS OVERVIEW 2014 GS FEED WATER HEATER BYPASS SYSTEM General Description These valves are designed to bypass high pressure feed water around the pre-heaters
Angle Seat Valves by Schubert & Salzer
Angle Seat Valves by Schubert & Salzer Angle seat valves contact factory Angle seat valves Angle Seat Valve 7010, reinforced design stainless steel 2" up to 3" 580 psi diaphragm actuator, stainless steel
Flow controller (PN 25) AVQ - return and flow mounting
Data sheet Flow controller (PN 5) - return and flow mounting Description is a self-acting flow controller primarily for use in district heating systems. The controller closes when set max. flow is exceeded.
Lined Butterfly Valve Pfeiffer Type BR 10a
Lined Butterfly Valve Pfeiffer Type BR 10a Application Tight closing, double eccentric butterfly valve with PTFE lining for process engineering and plants with industrial requirements, especially suitable
Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a
Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a Application Tight-closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN
Series 46 Self-operated Regulators Differential Pressure and Flow Limiters Type 46-5 Type 46-6
Series 46 Self-operated Regulators Differential Pressure and Flow imiters Type 46-5 Type 46-6 Application Differential pressure and flow limitation for district heating systems with indirect connection,
Series MRM/MRK For nominal pressures up to 640 bar /4500 lbs Automatic Recirculation Valve for pump protection
Series MRM/MRK For nominal pressures up to 640 bar /4500 lbs Automatic Recirculation Valve for pump protection Series MRM Introduction Modern processing industry often requires centrifugal pumps to operate
2-position electric actuators with Ball valves VBZ ½...11/4
4 831.2 & VBZ ½...11/4 2-position electric actuators with Ball valves VBZ ½ 11/4 90 angle - Unidirectional rotation VBZ ½ 11/4 Electric rotary actuators for two-port ball valves Operating voltage AC 230
ARI-Strainer PN63-160
ARI-Strainer PN63-160 ARI-Strainer - Screen of stainless steel DN 10-100 ARI-Strainer - Straight through with flanges TRB 801 Annex II No. 45 Cast steel Forged steel High temp. Steel Fig. 050 Page 2 +
ARI-STEVI 423 / 463 Pneumatic actuator ARI-DP 34-34T. Electric actuator ARI-PREMIO 5-25 kn ARI-PREMIO-Plus 2G 5-25 kn
ARI-STEVI 423 / 463 (DN200-300) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators ARI-STEVI 423 / 463 Pneumatic actuator ARI-DP
GROUPCODE NEN : ANSI : STEEL BS : STEEL
RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : 4 8 8 9 10 11 1 13 14 15 s 0,8 0,8 1 1 1 1 1 1 ring d3 8, 9,8 10,8 11,8 13 14,1 15,1 16, d4 3 3, 3,3 4,1 4,9 5,4 6,, d 8,4 9,4 10,4 11,4 1,5 13,6 14,6
NORI 320 ZXSV Type Series Booklet
Globe Valve NORI 320 ZXSV PN 250-320 DN 10-50 Type Series Booklet Legal information/copyright Type Series Booklet NORI 320 ZXSV All rights reserved. The contents provided herein must neither be distributed,
R o L. BUTTERFLY VALVE of carbon steel with welded ends 313 -series BLUE LINE. Description
of carbon steel 313 -series C ont R o L Description Edition 23-07-2015 The welded butterfly valve 313 is specially designed for district heating and district cooling. It can be used as an on-off or control
Series 240 Type Gas and Type Gas Automatic Shut-off Valves for Gases (valve class D)
Series 240 Type 3241-1-Gas and Type 3241-7-Gas Automatic Shut-off Valves for Gases (valve class D) DIN-DVGW typetested acc. to DIN EN 161 (2013-04) Application Control valve for control systems subject
BR 10a Control and Shut-off Butterfly valve
M-PTFE lined double-eccentric BR 10a Control and Shut-off Butterfly valve Application: Tight-closing, double-eccentric butterfl y control valve with M-PTFE lining for process engineering and plants with
ARI-FABA -Plus Stop valve with bellows seal
Stop valve with bellows seal Free of maintenance stop valve with bellows seal - metallic sealing ARI-FABA -Plus - Straight through with flanges DIN DVGW-Type approval TA - Luft TÜV-Test-No. 973-10183778
2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65
2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65 Excellent combination of good control characteristic and high fl ow rates High cycle life Clean design for optimal
FASANI PRESSURE SEAL CAST GLOBE VALVES - STYLE B Y AND T PATTERN
A wide range of globe valves specifically designed for high pressure and high temperature applications, where low pressure loss is required. FEATURES GENERAL APPLICATION Our pressure seal globe valves
Flow controller (PN 25) AVQ - return and flow mounting
Data sheet Flow controller (PN 5) - return and flow mounting Description is a self-acting flow controller primarily for use in district heating systems. The controller closes when set max. flow is exceeded.
Maintenance-free shut-off valves PN 25/40 DN
Type series booklet 7160.1/7-10 NORI 40 Maintenance-free shut-off valves with bellows flanged or with butt weld ends Type ZYLB Type ZYSB PN 25/40 DN 15-300 Fields of Application In heat transfer plants,
ARI-Strainer. ARI-Strainer - Screen and supporting basket made of stainless steel. ARI-Strainer - Y-pattern with flanges
ARI-Strainer ARI-Strainer - Screen and supporting basket made of stainless steel ARI-Strainer - Y-pattern with flanges TRB 801 Annex II No. 45 (except EN-JL1040) EN ISO 15848-1 / TA - Luft TÜV-Test-No.
BALL VALVE - 340BA SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 30BA SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
Series W&T Pneumatic Control Valve Type RVG Globe valve and angle valve
Series W&T Pneumatic Control Valve Type RVG Globe valve and angle valve Application Control valve for feedwater and steam applications in power plant engineering and the petrochemical industry Nominal
with electric and pneumatic actuators Control valve straight through with V-port plug DN ARI-STEVI 425 / 426
with electric and pneumatic actuators Control valve straight through with V-port plug DN 300-500 ARI-STEVI 425 / 426 Electric actuator AUMA SAR with LE Electric multiturn actuator capable of high closing
DATA SHEET TB 23b. BR 23b Rotary plug valve Stainless steel rotary plug valve in DIN - Version. Applications. Versions
DATA SHEET TB 23b BR 23b Rotary plug valve Stainless steel rotary plug valve in DIN - Version Applications Stainless steel rotary plug valve with high fl ow capacity for technical process plants, especially
Series 250 Pneumatic Control Valve Type and Type High Pressure Valve Type 3252
Series 250 Pneumatic Control Valve Type 3252-1 and Type 3252-7 High Pressure Valve Type 3252 Application Control valve used control small flow rates in process engineering Nominal size G 1 2 1 NPT 1 2
Butterfly valves ARI-ZIVA -Z / ARI-ZIVA -G. with notch lever. with worm gear. with electric rotary actuator rotork
Butterfly valves ARI-ZIVA -Z - Fig. 014 - Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range ARI-ZIVA -G - Fig. 015 - Free of maintenance butterfly valve with threaded eyelets
Angle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a robust low maintenance aluminium actuator. The valve spindle is sealed by a self-adjusting gland packing providing
ARI-STOBU PN16-40 Stuffing box valve
Stuffing box valve Stop valve with gland seal - metallic sealing Straight through with flanges TRB 801 Annex II No. 45 (except EN-JL1040) German TA-Luft TÜV-Test-No. 922-9204866 Grey cast iron SG iron
ARI-STEVI 470 / 471 (DN15-150)
With pneumatic and electric actuators ARI-STEVI 470 / 47 (DN5-50) Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem ARI-STEVI 470 / 47 Pneumatic actuator
back to main page Type: Butterfly valves Instructions and Operation Manual Warning! Warning! Danger for life! 1. Intended use Danger for life!
Instructions and operation manual for butterfly valves This manual is intended to support the users of Herberholz butterfly valves type HRD/HRA, RD/RA, LDKE/LDKF for installation, operation and maintenance
Fasani Pressure Seal Cast Gate Valves - Style A Wedge Gate and Parallel Slide
A series of robust gate valves specifically designed for applications in the power industry Features General application Our pressure seal -Style A gate valves are recommended for several applications
BUTTERFLY VALVE WAFER TYPE of carbon steel 311 ( ) series
Operation WAFER TYPE of carbon steel 311 (310-312) series C ont R o L Description Edition 23-07-2015 Wafer type butterfly valve 311 (310 312) series is used in industrial pipelines for demanding on-off
Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6
+ CARBON STEEL Type: ball valve ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar - 250 Bar
Maintenance-free metallic seat shut-off globe valves
Type leaflet 7150.1-10 BOA-H R Maintenance-free metallic seat shut-off globe valves with bellows flanged to new European standard 1092-2 type 21 Grey cast iron PN 16 DN 15-300 Nodular cast iron PN 16 DN
Butterfly valves PN6, PN10, PN16
4 136 Butterfly valves PN6, PN10, PN16 VKF46... Butterfly valves for fitting between counter-flanges Nominal pressures PN6, PN10, PN16 For fitting between PN6, PN10 or PN16 counter-flanges to ISO 7005
Butterfly valves. ARI-ZIVA -Z - Fig Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range
ARI-ZIVA -Z - Fig. 014 - Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range ARI-ZIVA -Z / ARI-ZIVA -G Butterfly valves ARI-ZIVA -G - Fig. 015 - Free of maintenance butterfly
Sempell controlled non-return or Bled Steam Check Valves prevent unallowable pressure built up in the turbine coming due to back-flowing steam.
Sempell controlled non-return or Bled Steam Check Valves prevent unallowable pressure built up in the turbine coming due to back-flowing steam. Features and Benefits Special advantages of the valve series
Sempell High Pressure Stop Valves Model VA500 (DIN)
Designed for the isolation and control of high temperature and high pressure systems, this multipurpose globe valve can be used in a wide variety of applications. Features Type tested (except for material
Forged steel High temperature steel Stainless steel Fig. 640/641 (Y) Page 2. High temperature steel Fig. 640/641 (Y) Page 6
Thermodynamic steam trap CONA TD Thermodynamic steam trap Thermodynamic steam trap PN40 - with flanges (Fig. 640/641...1) - with screwed sockets (Fig. 640/641...2) - with socket weld ends (Fig. 640/641...3)
Diaphragm Valve, Metal
Distributed by: Tel: 905.677.9000 Toll Free: 1.800.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The GEMÜ 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled
Differential pressure relief controller (PN 16, 25, 40) AFPA / VFG 2(1)
Data sheet Differential pressure relief controller (, 25, 40) AFPA / VFG 2() Description The controller has a control valve, an actuator with one control diaphragm and spring for differential pressure
Page 6. Page 6. Page 6. Page 7. Page 8. Page 9. Page 10 / 11
Butterfly valves ARI-ZIVA -Z - Fig. 014 - Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range ARI-ZIVA -G - Fig. 015 - Free of maintenance butterfly valve with threaded eyelets
with pneumatic actuator Pneumatic process valve, Y-pattern DN ARI-STEVI AS 350 Pneumatic actuator - with screwed sockets
with pneumatic actuator Pneumatic process valve, Y-pattern DN 15-50 ARI-STEVI AS 350 - with screwed sockets Piston actuator Required air supply pressure, max. 10 bar Operating pressure, max. 16 bar Page
Maintenance-free metallic seat shut-off globe valves
Type leaflet 7150.1/5-10 BOA R -H Maintenance-free metallic seat shut-off globe valves with bellows flanged to new European standard 1092-2 type 21 Grey cast iron PN 16 DN 15-300 Nodular cast iron PN 16
NORI 500 ZXLR/ZXSR. Type Series Booklet
Globe Valve NORI 500 ZXLR/ZXSR PN 250-500 DN 10-50 With Gland Packing With Back Seat Flanged or with Butt or Socket Weld Ends Type Series Booklet Legal information/copyright Type Series Booklet NORI 500
Fig. BGV116,BGV216,BGV225 & BGV340
DN 15-200 Cast Iron,Nodular Cast Iron & Carbon Steel DN 15-200 PN16,PN25 & (PN40 Carbon Steel) Fig. BGV116,BGV216,BGV225 & BGV340 Page 1 / 9 General description General Description ICPrange of bellows
Series 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244
Series 240 Pneumatic Control Valves Type 3244-1 and Type 3244-7 Three-way Valve Type 3244 DIN and ANSI versions Applications Mixing or flow-diverting valves for use in process engineering and industrial
The Original Seat Valve
.1 The Original Seat Valve SRC Sanitary Remote-Controlled Valve Application SRC is an air-operated seat valve in a sanitary and flexible design giving a wide field of application, e.g. as a stop valve
STEVI 440 / 441. Straight through control valve DN
with electric and pneumatic actuators Straight through control valve DN 15-100 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices available, e.g.
600, 630. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The /630 pneumatically operated 2/2-way valves have a low maintenance piston actuator which can be controlled by inert gaseous media. They have an integral optical