Angle Seat Valves by Schubert & Salzer

Transcription

1 Angle Seat Valves by Schubert & Salzer

2 Angle seat valves

3

4 contact factory

5

6 Angle seat valves Angle Seat Valve 7010, reinforced design stainless steel 2" up to 3" 580 psi diaphragm actuator, stainless steel rolling diaphragm piston actuator column head section, reinforced piston rod reinforced, stainless steel 316 Ti Normally closed angle seat valves, closing against the flow (operating with fluids). Nominal size max. Working pressure (differential pressure) Pilot pressure Diaphragm area Springs psi stainless steel (psi) number 2" " 3 2" " 8 2" " /2" " 3 2 1/2" " 8 2 1/2" " 12 3" " 3 3" " 8 3" " 12 Standard Digital position indicator, type 2040 Digital Position Indicator for Piston Valves *visual display of valve position *two position switch output *configuration and diagnositcs with DeviceConfig O57 1 O , Dome 2 Position indicator 3 Connection (M12x1) 4 Mounting kit 5 Sensing pin 6 Stop 7 Actuator 8 Rotation angle indicator 9 Coupling M12x Version for linear drives Version for partturn actuators

7

8 Angle seat valves Angle Seat Valve 7010, reinforced design Spring closes NC (closing with flow) Normally closed angle seat valves, closing with the flow. Operates better with gases, with liquids water hammer is possible. Piston actuator diameter 3" Working pressure [psi] " 2" 2 1/2" 3" Spring opens NO (closing against flow) Normally open angle seat valves, closing against the flow. Piston actuator diameter 5" Working pressure [psi] " 2" 2 1/2" 3" TYPE 7010NCwith flow reinforced Pilot pressure [psi] TYPE 7010NOagainst flow reinforced Pilot pressure [psi] Piston actuator diameter 5" Piston actuator diameter 5" PEEK seating seal Working pressure [psi] " 2" Working pressure [psi] " PEEK 2" /2" 3" /2" " TYPE 7010NCwith flow reinforced Pilot pressure [psi] TYPE 7010NOagainst flow reinforced Pilot pressure [psi] Diaphragm actuator diameter 10" Diaphragm actuator diameter 10" PEEK seating seal working pressure [psi] " 2" 2 1/2" Working pressure [psi] " PEEK 2" 2 1/2" 3" 3" TYPE 7010NCwith flowreinforced pilot pressure [psi] TYPE 7010NOagainst flow Pilot pressure [psi] higher pressures on request

9

10 Angle seat valves Angle Seat Control Valve 7020, reinforced design with integrated positioner 2" up to 3", 580 psi digital positioner, Type 8049 diaphragm actuator rolling diaphragm piston actuator head section, reinforced piston rod reinforced Admissible Pressures digital positioner i/ppositioner p/ppostioner Size Max. pressure (psi) Cv Values linear Supply pressure range Piston Ø equal percentage Size 2" 2 1/2" 3" 2" 2 1/2" 3" 100% % Spring configuration PTFE PEEK psi inch Number 2" " 1 2" " 3 2" " 6 2" " 8 * 2" " /2" " 3 2 1/2" " 12 3" " 3 3" " 12 Size Differential pressure (psi) * standard spring configuration Supply pressure range Piston Ø Springs PTFE psi inch number 2" " 1 2" " 3 2" " 10 2" " 12 * 2 1/2" " 12 3" " 12

11

12 Angle Seat Motor Valve 7210 Angle seat valves Ordering Number System Article number 7210/ K S Nominal size: 1/4" (DN 8) only w ith seating seal PEEK 008 1/2" (DN 15) 015 3/4" (DN 20) 020 1" (DN 25) /4" (DN 32) /2" (DN 40) 040 2" (DN 50) 050 Item: Valve V Valve w ithout actuator U Actuator A Body design: Angle bodied 1 Connection: Whitw orththread 0 NPT thread 5 w ithout thread 6 Welding ends acc. ISO H Triclamp Z Body material: Bronze 1 Stainless steel 2 Seating seal: PTFE 0 Viton 1 EPDM 2 BUNAN 3 PEEK 7 Actuator: Control actuator BM250C/IOS V AC/120250V DC control electr. 420mA feedb. 420mA 2 limit sw itch. Control actuator BM24C 24V AC/DC control electronics 210V feedback 210V Control actuator BM24C/I 24V AC/DC control electronics 420mA feedback 210V OnOff actuator BM24 24V AC/DC OnOff actuator BM V AC OnOff actuator BM V AC Control actuator BM24C/IOS2 2030V AC/2045V DC control electr. 420mA feedback 420mA 2 limit sw itch. 8 9 Control plug: none linear 100% 1 equal percentage 100% 2 linear 40% 3 equal percentage 40% 4 linear 25% 5 equal percentage 25% 6 Safety position: w ithout safety position spring to close 0 spring to open 1 Stroking times Standard (3.5s/ 0.04 inch for control actuators 7.5s / 0.04 inch for onoffactuators) 4.5 s/ 0.04inch (onoff actuators only) L 1.75s / 0.04 inch (control actuators only), w ith safety spring return 3.0s / 0.04 inch 1 7.0s / 0.04 inch (control actuators only) s / 0.04 inch (control actuators only) 3 Ordering example: 7210/025VK152021: Angle seat motor valve type 7210, 1", pipe thread NPT, stainless steel body, seating seal PTFE, control actuator BM24C/I, 24V AC/DC, 180 lbf, control electronics 420 ma, position feedback 210V, linear characteristic, Cvvalue 16.2 (100 %).

13 For additional information:

14 Angle seat valves 3/2 Way Control Valve 7082 with integrated positioner Technical Information Nominal sizes 1/2" up to 2" Connections NPT thread: 1/2" up to 2" Nominal pressure 580 psi Fluid temperature 22 F up to F Materials Body Seating seal Stainless steel 316 L / 316 Ti PTFE Bonnet Brass chrome plated (actuator Ø 3") Aluminium (actuator Ø 5") Diaphragm actuator stainless steel Actuator springs Stainless steel ASTM A (actuator Ø 3", 10") Spring steel wire C, zinc coated (actuator Ø 5") Packing PTFE (carbon filled), spring ASTM A Valve stem Stainless steel 316 Ti, roller burnished Position indicator PA Trogamid (clear) with digital positioner Type /2 Way Motor Control Valve 7282 Technical Information Valve Body materials Stainless steel 316L Nominal sizes 1/2" up to 1 1/2" Connections NPT thread: 1/2" up to 1 1/2" Nominal pressure 580 psi Fluid temperature 22 F up to F Technical Information Motor Actuator Type of motor Function Nominal voltage Set point Load Position feedback external load limit switches max. switching load Power consumption Stroking time (standard) Thrust Class of protection Ambient temperature BM24C Control BM24C/I Control 24 V AC/DC 24 V AC/DC 2 10 V 4 20 ma 100 kohm 500 Ohm 2 10 V 2 10 V 3 W 3 W 3.5s per 3.5s per 0.04inch 0.04inch BM24C/IOS2 BM250C/IO2 BM24 Control Control On/Off 2030V AC 85250V AC 24 V AC/DC 2045V DC V DC 4 20 ma 4 20 ma 3step 500 Ohm 500 Ohm 4 20 ma 4 20 ma < 700 Ohm < 700 Ohm 2 x 2 x 24V AC/DC 24V AC/DC 70mA 70mA 3 W 4 W 3 W 3.5s per 3.5s per 0.04inch 0.04inch 190 s/inch 800 N IP F up to +140 F BM115 BM230 On/Off On/Off 115 V AC 230 V AC 3step 3step 6 W 6 W 190 s/inch 190 s/inch

15 ANSI Flanged Valve 1/2" up to 2" Technical Information Nominal sizes 1/2" up to 2" Body material 316L Stainless Steel Connection Flanges acc. ANSI B16.5Class 150 or DIN EN Dimensions Nominal pressure Max. fluid temperature: with metal bonnet with plastic bonnet diaphragm act. stainless steel Ambient temperature Viskosity of media Vakuum Working pressure for version without cavities Acc. ANSI/ISA or DIN EN 5581 Row 1 ANSI150 or 580 psi 22 F up to +338 F, opt F 22 F up to +275 F 22 F up to +392 F 22 C up to +140 F maximum 600 mm²/s (600cSt, 80 E) maximum 0,001 bar abs maximum 175 psi ANSI Flanged Control Valve 1/2" up to 2", 580 psi 7037 Technical Information Nominal sizes 1/2" up 2" Body material 316L Stainless Steel Connection Dimensions Flanges acc. ANSI B16.5Class 150 or DIN EN Acc. ANSI/ISA or DIN EN 5581 Row 1 Pipe thread acc. DIN/ISO 1/2" 2" Nominal pressure 580 psi Media temperature 22 F up to +392 F pneumatical positioner Type 8047 pneumatical positioner Type 8047 digital positioner Type 8049 position indicator PA Trogamid (clear) springs bonnet brass plated (actuator 2", 3") aluminium, corrosion protected (actuator 5"), optional plastic (actuator 2", 3") stainless steel by request exterior lip sealing valve stem stainless steel 316Ti, roller burnished packing from filled PTFE (carbon filled), special version for reduced hollow spaces (packing underneath) head section body in stainless steel 316L seating seal PTFE and other maerials

16