BIG BORE TYPE NC ROTARY TABLE

Size: px

Start display at page:

Download "BIG BORE TYPE NC ROTARY TABLE"

Patricia Willis
5 years ago
Views:

1 BIG BORE TYPE NC ROTARY TABLE MATSUMOTO MACHINE CO., LTD. CATALOGUE.No.50103E

2 'MMK' NC ROTARY TABLE UP-GRADES YOUR MACHINING CENTER!! MD P4 HORIZONTAL/VERTICAL TYPE MDH P6 MDB P8 NC ROTARY TABLE VERTICAL TYPE MDU P10 HORIZONTAL TYPE MDO P12 SUPER HIGH SPEED TYPE MDVi P14

3 MDAT P16 2 AXIS NC ROTARY TABLE ROTARY AXIS TILTING AXIS MDAT-ECT P18 NC ROTARY TABLE FOR EDM COMPLETE-SEALED TYPE MDE P20 PRECISION SPIN-TABLE HIGH SPEED CONTINUOUS-SPINNING TYPE MT P22 CONTROLLER 1 or 2 AXIS PMK P24 TAIL STOCK MANUAL TYPE TCTHC P27 HYDRAULIC TYPE TPTHP P28 OPTIONS CHUCK SCROLL CHUCK RS P29 POWER CHUCK Z P30 AIR HYDRAULIC UNIT AH P31

4 BIG BORE TYPE NC-ROTA HIGH ACCURACY,HIGH RIGI OTT WORM GEAR DRIVE SYSTEM!! The uitra super special worm/wheel, which was developed in cooperation with OTT(Germany) and SMP(France), is installed to obtain high rigidity,accuracy, and efficiency(patent protecting). Axial-radial bearing with a large diameter is adapted to ensure high rigidity and accuracy, by accepting high machining force. High torque transmission provides long life. Table may be used horizontally or vertically. CHARACTERISTICS LONGER SERVICE LIFE!! Multi-tooth engagement and face contact gives much higher accuracy and the longest service life. ADJUSTMENT OF BACKLASH IS EASY!! By this special worm gearthe backlash can be eliminated very easily and it is possible to abjust backlash nearly zero. 2 LARGE THRU-HOLE!! The large thru-hole facilitates adapting chucks and tooling on the table in order to follow multiple applications(for examplelong machining worketc).

Large surface engagment by a special tooth shape. These improvements can ensure a high endurance and a positive indexing for a iong continuous use. Gear rate 601.

5 RY TABLE WITH DITY AND LARGE THRU-HOLE. Comparison of OTT Worm Gear Drive System and Double-Lead Worm Gear OTT WORM GEAR DRIVE SYSTEM DOUBLE-LEAD WORM GEAR MANUFACTURED DRAWING ENDURANCE Gear rate High contact ratio. Large surface engagment by a special tooth shape. These improvements can ensure a high endurance and a positive indexing for a iong continuous use. Gear rate 601. This type has a less endurance and a large surface stress. BACKLASH RATE 0.003mm0.008mm This low backlash rate is allowed to use for positivive indexing table. 0.04mm0.05mm When using a tilting tablethe center of gravity in moved due to the backlash and a table itself is slide down. ADJUSTMENT OF BACKLASH Backlash can be eliminated by adjusting the phases of the gears so that distance between each gears tooth can be shortened. As shown is the drawing. One side of a tooth of the worm within the length of the action always make contact with wheel gear and an another side have clearance. This results no seizure in case of zero backlash. By providing different pitch size for each side of a tooth, the gear is turned toward thicker tooth in order to adjust backlash. The table clamp signal is automatically turned on/off when it is positioned. In this case there should be at least 0.04mm 0.05mm of clearance in order to allow thermal expansion because both side of a tooth are used to rotate the table.if this has a smaller clearance, it causes seizure of a tooth surface. 3

6 MD TYPE HORIZONTAL/VERTICAL TYPE NC ROTARY TABLE HIGH ACCURACY,RIGIDITY AND ENDURANCE. MD 322R(L) MD 323R(L) MD 400R(L) MD 403R(L) MD 500R(L) MD 503R(L) MD 630R(L) MD 632R(L) MD 800R MD 1000R MD 1200R SPECIFICATION Note:( )means that for higher indexing accuracy, the model with rotary scale built-in is available upon request. ITEMS MODEL MD322R(L) MD323R(L) MD400R(L) MD403R(L) MD500R(L) MD503R(L) MD630R(L) MD632R(L) MD800R MD1000R MD1200R TABLE DIAMETER mm CENTER HEIGHT IN VERTICAL mm TABLE HEIGHT IN HORIZONTAL mm OVERALL HEIGHT IN VERTICAL mm THRU HOLE DIAMETER mm WIDTH OF T-SLOT mm WIDTH OF GUIDE BLOCK mm(h7) MOTOR(FANUC) 6/ / / / / / / / / / /1200 GEAR RATIO 1/120 1/60 1/180 1/60 1/180 1/60 1/360 1/120 1/360 1/360 1/360 MAX. R.P.M r.p.m MIN. INDEXING UNIT degree INDEXING ACCURACY sec 12(6) 12(6) 12(6) 12(6) 12(6) 12(6) 12(6) 12(6) 12(6) 12(6) 12(6) REPEATABILITY sec 2(2) 2(2) 2(2) 2(2) 2(2) 2(2) 2(2) 2(2) 2(2) 2(2) 2(2) CLAMPING FORCE HYDRAULIC PRESSURE -m kg-m a kg/cm HORIZONTAL kg PERMISSIBLE LOAD VERTICAL kg MAX MACHINING FORCE -m kg-m WEIGHT kg Application for other motors, Meldas,Yasukawa, OSP, Siemens etc available.

7 MD322R MD323R MD400R MD403R MD500R MD503R MD630R MD632R MD800R MD1000R MD1200R 5

MDH TYPE HORIZONTAL/VERTICAL TYPE NC ROTARY TABLE MDH 152R MDH 232R(L) MDH 233R(L) MDH 322R(L) MDH 323R(L) SPECIFICATION Note:( )means that for higher indexing accuracy, the model with rotary scale

8 MDH TYPE HORIZONTAL/VERTICAL TYPE NC ROTARY TABLE MDH 152R MDH 232R(L) MDH 233R(L) MDH 322R(L) MDH 323R(L) SPECIFICATION Note:( )means that for higher indexing accuracy, the model with rotary scale built-in is available upon request. ITEMS MODEL MDH152R MDH232R(L) MDH233R(L) MDH322R(L) MDH323R(L) TABLE DIAMETER mm CENTER HEIGHT IN VERTICAL mm TABLE HEIGHT IN HORIZONTAL mm OVERALL HEIGHT IN VERTICAL mm THRU HOLE DIAMETER mm WIDTH OF T-SLOT mm WIDTH OF GUIDE BLOCK mm(h7) MOTOR(FANUC) 3/3000 3/3000 6/2000 6/ /2000 GEAR RATIO 1/90 1/120 1/60 1/120 1/60 MAX. R.P.M r.p.m MIN. INDEXING UNIT degree INDEXING ACCURACY sec 60(10) 14(6) 14(6) 12(6) 12(6) REPEATABILITY sec 3(3) 2(2) 2(2) 2(2) 2(2) CLAMPING FORCE HYDRAULIC PRESSURE PERMISSIBLE LOAD -m kg-m a kg/cm HORIZONTAL kg VERTICAL kg MAX MACHINING FORCE -m kg-m WEIGHT kg Application for other motors, Meldas,Yasukawa, OSP, Siemens etc available.

9 MDH152R MDH232R MDH233R MDH322R MDH323R 7

10 MDB TYPE VERTICAL TYPE NC ROTARY TABLE MDB 182R(L) MDB 232R(L) MDB 233R(L) MDB 322R(L) MDB 323R(L) MDB 403R(L) SPECIFICATION ITEMS MODEL MDB182R(L) MDB232R(L) MDB233R(L) MDB322R(L) MDB323R(L) MDB403R(L) TABLE DIAMETER mm CENTER HEIGHT IN VERTICAL mm OVERALL HEIGHT IN VERTICAL mm THRU HOLE DIAMETER mm WIDTH OF T-SLOT mm WIDTH OF GUIDE BLOCK mm(h7) MOTOR(FANUC) 2/2000 3/3000 6/2000 6/ / /2000 GEAR RATIO 1/90 1/120 1/60 1/120 1/60 1/60 MAX. R.P.M r.p.m MIN. INDEXING UNIT degree INDEXING ACCURACY sec REPEATABILITY sec CLAMPING FORCE HYDRAULIC PRESSURE -m kg-m a kg/cm PERMISSIBLE LOAD (VERTICAL) kg MAX MACHINING FORCE -m kg-m WEIGHT kg Application for other motors, Meldas,Yasukawa, OSP, Siemens etc available.

11 MDB182R MDB232R MDB233R MDB322R MDB323R MDB403R 9

MDU TYPE VERTICAL TYPE NC ROTARY TABLE MDU 253R(L) MDU 322R(L) MDU 323R(L) MDU 400R(L) MDU 403R(L) MDU 500R(L) MDU 503R(L) MDU 630R(L) Photo shows with Holder Clamp System(option).

12 MDU TYPE VERTICAL TYPE NC ROTARY TABLE MDU 253R(L) MDU 322R(L) MDU 323R(L) MDU 400R(L) MDU 403R(L) MDU 500R(L) MDU 503R(L) MDU 630R(L) Photo shows with Holder Clamp System(option). SPECIFICATION Note:( )means that for higher indexing accuracy, the model with rotary scale built-in is available upon request. ITEMS MODEL MDU253R(L) MDU322R(L) MDU323R(L) MDU400R(L) MDU403R(L) MDU500R(L) MDU503R(L) MDU630R(L) TABLE DIAMETER mm CENTER HEIGHT IN VERTICAL mm OVERALL HEIGHT IN VERTICAL mm THRU HOLE DIAMETER mm WIDTH OF T-SLOT mm WIDTH OF GUIDE BLOCK mm(h7) MOTOR(FANUC) 6/2000 6/ / / / / / /2000 GEAR RATIO 1/60 1/120 1/60 1/180 1/60 1/180 1/60 1/360 MAX. R.P.M r.p.m MIN. INDEXING UNIT degree INDEXING ACCURACY sec 14(6) 12(6) 12(6) 12(6) 12(6) 12(6) 12(6) 12(6) REPEATABILITY sec 2(2) 2(2) 2(2) 2(2) 2(2) 2(2) 2(2) 2(2) CLAMPING FORCE HYDRAULIC PRESSUER -m kg-m a kg/cm PERMISSIBLE LOAD (VERTICAL) kg MAX MACHINING FORCE -m kg-m WEIGHT kg Application for other motors, Meldas,Yasukawa, OSP, Siemens etc available.

13 MDU253L MDU322R MDU323R MDU400R MDU403R MDU500R MDU503R MDU630R 11

MDO TYPE HORIZONTAL TYPE NC ROTARY TABLE HIGH ACCURACY, HIGH RIGIDITY, EXCELLENT DURABILITY. ROTARY JOINT(6-8 PORTS)STORED-IN TYPE Port is located on side of table,easy to connect to machine.

14 MDO TYPE HORIZONTAL TYPE NC ROTARY TABLE HIGH ACCURACY, HIGH RIGIDITY, EXCELLENT DURABILITY. ROTARY JOINT(6-8 PORTS)STORED-IN TYPE Port is located on side of table,easy to connect to machine. MDO 333R(L) MDO 403R(L) MDO 503R(L) MDO 603R(L) SPECIFICATION ITEMS MODEL MDO333R(L) MDO403R(L) MDO503R(L) MDO603R(L) TABLE DIAMETER mm TABLE HEIGHT IN HORIZONTAL mm OVERALL HEIGHT IN VERTICAL mm THRU HOLE DIAMETER mm WIDTH OF T-SLOT mm WIDTH OF GUIDE BLOCK mm(h7) MOTOR(FANUC) 12/ / / /2000 GEAR RATIO 1/60 1/60 1/60 1/60 MAX. R.P.M r.p.m MIN. INDEXING UNIT degree INDEXING ACCURACY sec REPEATABILITY sec CLAMPING FORCE HYDRAULIC PRESSURE -m kg-m a kg/cm PERMISSIBLE LOAD(HORIZONTAL) kg MAX MACHINING FORCE -m kg-m WEIGHT kg Application for other motors, Meldas,Yasukawa, OSP, Siemens etc available.

15 13 MDO403R MDO333R MDO603R MDO503L

MDVi TYPE SUPER HIGH SPEED TYPE NC ROTARY TABLE CHARACTERISTICS High speed, high precision "nearly zero backlash" rotary tables Large thru-hole especially suited for scroll cutting applications

16 MDVi TYPE SUPER HIGH SPEED TYPE NC ROTARY TABLE CHARACTERISTICS High speed, high precision "nearly zero backlash" rotary tables Large thru-hole especially suited for scroll cutting applications Vertical top mounted motor OPTIONS Diaphragm chuck MDVi 216 MDVi 346 SPECIFICATION ITEMS MODEL MDVi 216 MDVi 346 TABLE DIAMETER mm CENTER HEIGHT IN VERTICAL mm OVERALL HEIGHT IN VERTICAL mm THRU HOLE DIAMETER mm 35 WIDTH OF GUIDE BLOCK mm(h7) MOTOR(FANUC) 22/ /2000 GEAR RATIO 1/6 1/12 MAX. R.P.M r.p.m MIN. INDEXING UNIT degree INDEXING ACCURACY sec REPEATABILITY sec 2 2 PERMISSIBLE LOAD (VERTICAL) kg MAX MACHINING FORCE -m kg-m WEIGHT kg Application for other motors, Meldas,Yasukawa, OSP, Siemens etc available.

17 MDVi 216 MDVi

MDAT TYPE ROTARY AXISTILTING AXIS 2 AXIS NC ROTARY TABLE BOTH MULTIPLE FACE CUTTING AND TILTING AXES ARE NUMERICALLY CONTROLLED MDAT 173D(A)(B) MDAT 232DS(AS)(BS) MDAT 322DS(AS)(BS) MDAT

18 MDAT TYPE ROTARY AXISTILTING AXIS 2 AXIS NC ROTARY TABLE BOTH MULTIPLE FACE CUTTING AND TILTING AXES ARE NUMERICALLY CONTROLLED MDAT 173D(A)(B) MDAT 232DS(AS)(BS) MDAT 322DS(AS)(BS) MDAT 400DS(AS)(BS) MDAT 403DS(AS)(BS) MDAT 630D(A)(B) SPECIFICATION Note:( )means that for higher indexing accuracy, the model with rotary scale built-in is available upon request. ITEMS MODEL MDAT173D MDAT232DS MDAT322DS MDAT400DS MDAT403DS MDAT630D TABLE DIAMETER mm TABLE HEIGHT IN HORIZONTAL mm OVERALL HEIGHT AT 90TILTED mm CENTER HEIGHT AT 90TILTED mm THRU HOLE DIAMETER mm WIDTH OF T-SLOT mm WIDTH OF GUIDE BLOCK mm(h7) 18 PERMISSIBLE LOAD kg MAX MACHINING FORCE -m kg-m WEIGHT kg ROTARY AXIS TILTING AXIS ROTARY AXIS TILTING AXIS GEAR RATIO 1/90 1/360 1/120 1/120 1/120 1/180 1/180 1/180 1/60 1/180 1/360 1/360 MAX. R.P.M r.p.m MIN. INDEXING UNIT degree INDEXING ACCURACY sec 45(10) 45(10) 14(6) 45(10) 12(6) 45(10) 12(6) 45(10) 12(6) 45(10) 12(6) 45(10) REPEATABILITY sec 2(3) 3(3) 2(2) 3(3) 2(2) 3(3) 2(2) 3(3) 2(2) 3(3) 2(2) 3(3) ROTARY AXIS TILTING AXIS ROTARY AXIS TILTING AXIS ROTARY AXIS TILTING AXIS ROTARY AXIS TILTING AXIS CLAMPING FORCE HYDRAULIC PRESSURE -m kg-m a kg/cm MOTOR(FANUC) 3/3000 3/3000 3/3000 3/3000 6/2000 6/ / / / / / /2000 Application for other motors, Meldas,Yasukawa, OSP, Siemens etc available.

19 MDAT173D MDAT232DS MDAT322DS MDAT400DS MDAT403DS MDAT630D TYPE-D TYPE-B TYPE-A 17

MDAT-ECT TYPE ROTARY AXISTILTING AXIS 2 AXIS NC ROTARY TABLE This tilting table has its table surface on center line of tilting axis in order to secure wider working areas when installed on machining

20 MDAT-ECT TYPE ROTARY AXISTILTING AXIS 2 AXIS NC ROTARY TABLE This tilting table has its table surface on center line of tilting axis in order to secure wider working areas when installed on machining center, and threrefore larger work pieces can be applied for this table than before. MDAT 403DS ECT SPECIFICATION ITEMS MODEL MDAT403DS ECT TABLE DIAMETER mm 400 TABLE HEIGHT IN HORIZONTAL mm 425 OVERALL HEIGHT AT 90TILTED mm 677 CENTER HEIGHT AT 90TILTED mm 415 THRU HOLE DIAMETER mm WIDTH OF T-SLOT mm(h8) WIDTH OF GUIDE BLOCK mm(h7) PERMISSIBLE LOAD kg 400 MAX MACHINING FORCE -m 1470 kg-m 150 WEIGHT kg 1250 ROTARY AXIS TILTING AXIS GEAR RATIO 1/60 1/360 WHEEL GEAR MAX. R.P.M r.p.m MIN. INDEXING UNIT degree INDEXING ACCURACY sec REPEATABILITY sec 2 3 CLAMPING FORCE HYDRAULIC PRESSURE -m kg-m a kg/cm MOTOR(FANUC) 22/ /2000 Application for other motors, Meldas,Yasukawa, OSP, Siemens etc available.

21 MDAT403DS ECT This drawing with rotary joint(option). 19

MDE TYPE COMPLETE-SEALED TYPE NC ROTARY TABLE FOR EDM MDE 150R(L) MDE 211R(L) MDE 400R(L) MDE 630R(L) SPECIFICATION ITEMS MODEL MDE150R(L) MDE211R(L) MDE400R(L) MDE630R(L) TABLE DIAMETER mm 150 210

22 MDE TYPE COMPLETE-SEALED TYPE NC ROTARY TABLE FOR EDM MDE 150R(L) MDE 211R(L) MDE 400R(L) MDE 630R(L) SPECIFICATION ITEMS MODEL MDE150R(L) MDE211R(L) MDE400R(L) MDE630R(L) TABLE DIAMETER mm CENTER HEIGHT IN VERTICAL mm TABLE HEIGHT IN HORIZONTAL mm OVERALL HEIGHT IN VERTICAL mm THRU HOLE DIAMETER mm WIDTH OF T-SLOT mm WIDTH OF GUIDE BLOCK mm(h7) MOTOR (2) () (12) (22) GEAR RATIO 1/90 1/180 1/180 1/360 MAX. R.P.M r.p.m MIN. INDEXING UNIT degree INDEXING ACCURACY sec REPEATABILITY sec PERMISSIBLE LOAD HORIZONTAL kg VERTICAL kg MAX MACHINING FORCE -m kg-m WEIGHT kg

23 MDE150R MDE211R MDE400L MDE630R 21

MT TYPE HIGH SPEED CONTINUOUS SPINNING TYPE PRECISION SPIN-TABLE HIGH SPEED SPINNING TABLE FOR GRINDING CENTER MT 200-1 MT 200-3 MT 200-5 MT 320-3 MT 500-1 SPECIFICATION ITEMS MODEL MT200-1 MT200-3

24 MT TYPE HIGH SPEED CONTINUOUS SPINNING TYPE PRECISION SPIN-TABLE HIGH SPEED SPINNING TABLE FOR GRINDING CENTER MT MT MT MT MT SPECIFICATION ITEMS MODEL MT200-1 MT200-3 MT200-5 MT320-3 MT500-1 TABLE DIAMETER mm CENTER HEIGHT IN VERTICAL mm TABLE HEIGHT IN HORIZONTAL mm OVERALL HEIGHT IN VERTICAL mm THRU HOLE DIAMETER mm 50 WIDTH OF T-SLOT mm(h8) WIDTH OF GUIDE BLOCK mm(h7) MOTOR 2KW 750W 750W 22/ KW INDEXING ACCURACY GEAR RATIO 1/20 1/10 1/6 1/6 1/30.05 MAX. R.P.M r.p.m CLAMPING FORCE HYDRAULIC PRESSURE PERMISSIBLE LOAD -m kg-m a kg/cm HORIZONTAL kg VERTICAL kg m GRINDING FORCE kg-m r.p.m. at 100 at 300 at 500 at 100 at WEIGHT kg

25 MT200-1 MT200-3 MT200-5 MT320-3 MT

1 or 2 AXIS CONTROLLER CABLE CONNECTION PMK CONTROLLER SPECIFICATION MODE ITEMS CONTENTS CONTENTS NUMBER OF AXIS MIN INDEXING UNIT MAX INSTRUCTION FIGURE 1AXIS or 2AXIS 0.001degree 999.

26 1 or 2 AXIS CONTROLLER CABLE CONNECTION PMK CONTROLLER SPECIFICATION MODE ITEMS CONTENTS CONTENTS NUMBER OF AXIS MIN INDEXING UNIT MAX INSTRUCTION FIGURE 1AXIS or 2AXIS 0.001degree degree PROGRAM CAPACITY 100 steps 16 channels PROGRAM CONTROL FUNCTION RS232C SPECIFICATION EXTERNAL PROGRAM SELLECTION ROTARY SCALE FEED BACK Repeat function, jump, sub-program, in-gear, continuous start When it adopts the running way as connecting with NC machine(machining center) and revolving the table as receiving the revolving angle command value in ON LINE.(In this case,it is unnecessary to make up the program of controller) 16 PROGRAM OPTIONS PROGRAM MODE DEMENTION Editing and display of program PRESENT POSITION DISPLAY MODE Display of program execution, executing channel, step number,and present position. DIAGNOSIS MODE In spite of program execute or stop, display inside state. PARAMETER CHANGE MODE Editing and display of parameter. ON LINE MODE The ON LINE automatic running by the data correspondence. INPUT INTERFACE RS232C PMK CONTROLLER SPECIFICATION MODEL AXIS ELECTRIC SOURCE DEMENTION W H D APPLICABLE MODEL PMK KVA KDH203,KDH302,MDH232,MDB232,MDAT232(TILTING AXIS),MT200 PMK KVA MDH233,MDH322,MD322,MDAT322(TILTING AXIS) PMK KVA MD323,MD400,MD500,MDAT400(TILTING AXIS) PMK KVA MD403,MD630,MDAT630(TILTING AXIS) PMK KVA MD1000,MD1200 PMK KVA MDAT232 PMK KVA MDAT233,MDAT322 PMK KVA MDAT323,MDAT PMK KVA MDAT403,MDAT630

27 EXAMPLES OF PROGRAM DRAWING EXAMPLES OF PROGRAM COTENTS OF MOTION Dividing in Jump to. Rotate Jump to. Each, rotatesin sends a message of complete signal. Repeated it intimes. normal rev. normal rev. Every each revolution send normal rev. message of complete signal. normal rev. normal rev. Jump to. reverse) revolution normal revolution normal revolution normal revolution g Working in normal revolution & work home position return. Jump to. min. feed command. normal revolution min. feed command. Work machining home position return. Jump to. reverse) revolution The complete signal doesn't output.. Dividing in Output complete signal normal revolution Continuous execute normal revolution Feed speed min normal revolution normal revolution Cancel continuous execute. normal revolution Jump to. Feed speed min normal revolution second dwell normal revolution Jump to. Clamp after revoluved. Output complete signal Clamp cancel. Unclamp afterrevoluved. Output complete signal UnClamp after revoluved. Output complete signal Clamp after revoluved. Output complete signal Clamp is effective. Clamp after revoluved. Output complete signal Jump to. Clamp cancel. Revoluve min Continuous start. Jump to. normal rotation Till repeat times. Loop Opening angle Dividing number in. normal rotation In normal rotation work machining home position return. Jump to. FIGURE OF MOTION START COMPLETE SIGNAL START COMPLETE SIGNAL START COMPLETE SIGNAL START COMPLETE SIGNAL START COMPLETE SIGNAL START COMPLETE SIGNAL START COMPLETE SIGNAL START COMPLETE SIGNAL MC WORKING PROGRAM PMK CONTROLLER RC232C SPECIFICATION EXAMPLE OF PROGRAM G101A45. M71 G101A45. M71 G101A90. M71 G101A180. M71 ANGLE DATA TRANSMIT START COMPLETE SIGNAL MEMORY 45SET UP 45ROTATE COMPLETE SIGNAL MEMORY 45SET UP 45ROTATE COMPLETE SIGNAL MEMORY 90SET UP 90ROTATE COMPLETE SIGNAL MEMORY 180SET UP 180ROTATE COMPLETE SIGNAL IN this case it uses the MACRO COMMAND. 25

28 CONNECTION DRAWING RECP51 RECP52 26

TAIL STOCK-MANUAL TYPE (TCTHC) MODEL A B C D E F G H I J K L M N O P Q R S T U THC200 220 185 35 50 24.1 MT3 30 44 155 2 17 51 269 299 125 29 55 M16 75 25 32 27 TC300 245 210 35 50 24.

29 TAIL STOCK-MANUAL TYPE (TCTHC) MODEL A B C D E F G H I J K L M N O P Q R S T U THC MT M TC MT M THC MT M TC MT M TC MT M TC MT M MODEL V W X Y Z a b c d e f g APPLICABLE MODEL THC h7 150 MDH230 MDB230 TC h7 150 MD320 THC h7 150 MDB320 MDH320 TC h7 180 MD400 TC h7 180 MD500 TC h7 300 MD630 27

30 TAIL STOTCK-HYDRAULIC TYPE(TPTHP) SPECIFICATION MODEL THP200 TP300 THP300 TP400 TP500 MAXIMUM HYDRAULIC PRESSURE Mpa kg/cm PRESSURE APPLICATION AREA cm THRUST FORCE AT 1.96Mpa (20kg/cm 2 ) KN kg OIL REQUIRED cc MODEL A B C D E F G H I J K L M N O P Q R S T U THP MT M TP MT M THP MT M TP MT M TP MT M MODEL V W X Y Z a b c d e f g h i j k l APPLICABLE MODEL THP h MDH230 MDB230 TP h MD320 THP h MDB320 TP h MD TP h MD500

31 SCROLL CHUCKS(RS) RS 68 RS MODEL WEIGHT A B C D E F G H I J K L M N O P RS6 8.5kg RS8 13.5kg RS12 48kg RS15 80kg RS18 116kg RS21 190kg

32 CHUCKING SYSTEM SPECIFICATION TABLE DIAMETER SCROLL CHUCKS POWER CHUCKS MODEL SIZE MODEL SIZE CYLINDER RS Z RC RS Z RC RS Z RNKP RS Z RCKP RS Z RCKP RS Z RCKP RS HH RCKP POWER CHUCKS(Z) MODEL STROKE of JAW A B C D E F G L M Z-6 RC Z- 8 RC Z-10 RNKP Z-12 RCKP Z-15 RCKP Z-18 RCKP HH-21 RCKP (mm in dia)

33 AIR HYDRAULIC UNIT AH-9 APPLICABLE MODEL MD 300 MD 400 MD 500 AH-8 APPLICABLE MODEL MDH 230 MDB 230 T-SLOT,CLAMPING BOLT J J TABEL DIAMETER A B C D E F G H I J K L M H M H M H M H M H M H M H M

34 SPECIAL APPLICATIONS NC ROTARY TABLE FOR EDM (ROTARY AXIS NCTILTING AXIS NC) NC ROTARY TABLE FOR EDM (ROTARY AXIS NC, TILTING AXIS MANUAL) NC ROTARY TABLE FOR WIRE-CUT EDM MDEAT TILTING AXIS NC MDET150 MDHW80 NC ROTARY TABLE NATIONAL TAPER POT BUILT-IN FOR WORK HOLDER MDUi800-PDM MDB200-PDM MDU300L-HCS MANUAL TILTNG NC ROTARY TABLE SLIDE SUPPORT TABLE MANUAL STEADY REST MDT322 FS600 FS500 NC ROTARY TABLE 2 AXIS NC ROTARY TABLE 2 FACE 32 MDH200R-2 MDD200

35 TILTING NC ROTARY TABLE NATIONAL TAPER POT BUILT-IN FOR WORK HOLDER TILTING NC ROTARY TABLE WITH PALLET CLAMP SYSTEM MDAT200B-H MDAT400-ECT-PCS MULTI-AXIS TILTING NC ROTARY TABLE 2 ROTARY AXIS 2 ROTARY AXIS 4 ROTARY AXIS MDATi MDATi MDATi NC ROTARY TABLE WITH WORK HOLDER ATTACHMENT OUR OTHER PRODUCTS MDH200R-H MDV300-2HN-160 MD300RU-8 AUTOMATIC STEADY REST AWC MD500RAJC-15 LZ

36 MATSUMOTO MACHINE CO.,LTD. HEAD OFFICE AND FACTORY NI-80 SHIMENOMACHI KANAZAWA JAPAN TEL FAX BRANCHES NAGOYAOSAKAUSA

Workholding for... High-volume machining

Workholding for... High-volume machining The Name To Know In Workholding Since 1916, LMC has been the name to know in workholding and it keeps getting better. Growing. Re-investing in engineering capabilities.