MK508MM Series. Back Pressure Regulators Mark 508MM Self-Operated Back Pressure Regulators. Self-Operated Back Pressure Regulators.
|
|
|
- Lawrence Hancock
- 5 years ago
- Views:
Transcription
1 MK508MM Series Self-Operated Back Pressure Regulators The MK508MM series are spring loaded, self actuated, direct-operated valves. The Mark 508MM Back Pressure Regulating Valves regulate upstream pressure and have excellent throttling characteristics to maintain the desired set point. They are available in 1 up to 10 inches (DN25 through DN250) body sizes. These regulators feature a construction capable of sustaining rugged use and their construction makes them easy to install and to maintain. Upstream pressure regulating valves (back pressure valves): Double seat (MK508MM Series) Features Flow to open design Available with ISA Face to face dimensions 3 different trim sizes for each body size, to meet a wide range of applications Quick-opening flow characteristic Trim features: Metal or Soft tightness, single or double ported Leakage Classes range from II up to VI (according to /FCI 70-3) External pressure sensing Stem tightness packing is available as elastomeric (lip seal) or Graphite gasket Wide range of actuators according to the requested regulation range Wide range of elastomeric diaphragms. Jordan Valve a division of Richards Industries 3170 Wasson Road Cincinnati, OH (f) info@richardsind.com Back Pressure Regulators Mark 508MM Self-Operated Back Pressure Regulators
2 Function: Reducing/ Relief/ Backpressure/ Differential Specifications Line Sizes: 1" up to 10" (DN25 - DN250) (ISA Standard), up to 20" (special) End Connections: Flanged ( or PN) Seat: Single/ Double Max Rating: 1500 CV: From 6 up to 850 (standard) Body Material: Carbon Steel Stainless Steel "Exotic" Materials Trim Material: Stainless Steel (std) "Exotic" Materials Diaphragms: Polychloroprene EPDM FKM other Max Inlet Pressure: 3,626 psig (250 barg (rating class 1500)) Regulated Pressure Range: psig ( barg) Min/ Max Temperature: 122 F/ 1004 F (-50 C/ 540 C) -2-
3 Table 1 - Fluid Applications MK508MM Series Self-Operated Back Pressure Regulators Specifications, Cont. Gas Steam/Vapor Liquids Air, inert gas, CO2, CO, hydrocarbons, O2, H2, F, NH3 Water Steam, alcoholic vapors, organic vapors, sulphuric acid, refrigerating vapor Water, aqueous solutions, hydrocarbons, alcohol, lubricating oils, diathermic oils, solvents, refrigerating fluids, acrylic compounds Table 2 - Cv (Kv) Values Trim Size Seat diameter DN (mm) /2" 16,5/14,5 6 (5,2) 3/4" 20,5/18,5 9 (7,8) 9 (7,8) 1" 25/23 13 (11,2) 18 (15,6) 18 (15,6) 1 1/2" 40/38 40 (34,6) 43 (37,2) 43 (37,2) 64 (55,4) 2" 50/48 54 (46,7) 64 (55,4) 128 (110,7) 128 (110,7) 3" 70/ (96,9) 204 (176,5) 240 (176,5) 240 (176,5) 4" 90/ (372) 440 (380,6) 6" 135/ (536,3) 440 (380,6) 8" 180/ (622,8) 10" 225/ (735.3) Table 3 - Actuator Spring Ranges Actuator Elastomeric Packing Minimum Graphite Packing Maximum Maximum allowable pressure psig (4,00 barg) 178 psig (12,3 barg) 390 psig (26,9 barg) 445 psig (31 barg) psig (2,00 barg) 88 psig (6,1 barg) 222 psig (15,3 barg) 249 psig (17 barg) psig (0,90 barg) 39 psig (2,7 barg) 99psig (6,8 barg) 112 psig (7,7 barg) psig (0,380 barg) 16 psig (1,1 barg) 42.1 psig (2,9 barg) 47.0 psig (3,2 barg) psig (0,0045 barg) 6.8 psig (0,47 barg) 17.4 psig (1,2 barg) 26.5 psig (1,8 barg) *Value achieved with resilient (elastomeric) seat leakage. For tank blanketing application. Actuator spring ranges are based on the following assumptions: - Stroke from setpoint is ±7mm - Offset max 33% for minimum set pressure - Low unbalancing forces on the plug - Leakage class IV for S1, II for S2, medium sized trims. Resilient (elastometric) seat leakage performance not taken into account for min. set pressure evaluation -3-
4 Specifications, Cont. Table 4 - Material Combination Body Carbon steel (AF2) 316 SS (IF2) Full 316 SS (IF3) -20 F T 800 F -20 F T 1000 F -321 F T 1000 F (-29 C T 427 C) (-29 C T 540 C) (-196 C T 540 C) Body ASME SA-216 WCC ASME SA-351 CF8M ASME SA-351 CF8M Bonnet ASME SA-216 WCC ASME SA-351 CF8M ASME SA-351 CF8M Inferior Cover ASME SA-216 WCC ASME SA-351 CF8M ASME SA-351 CF8M Packing See Table 5 Gaskets set See Table 6 Trim Seat ASME A ASME A ASTM A Plug ASME A ASME A ASTM A Plug Seating Surface See Table 7 Guide ASTM A PH ASTM A.276/A-479 UNS S21800 ASTM A.276/A-479 UNS S21800 Actuator Actuator Cover ASME SA-216 WCC ASME SA-351 CF8M ASME SA-351 CF8M Yoke ASME SA-216 WCC ASME SA-216 WCC ASME SA-351 CF8M Spring ASTM A-401 ASTM A-401 ASTM A Diaphragm See Table 8 Note: - SS = Stainless Steel - Carbon steel parts are painted according to Richards Inustries internal procedures - NACE material requirements: these material combinations meet the requirements of NACE MR 0103, non exposed conditions (par. 5.3). In case of exposed conditions (par. 5.2), or a different standard (e.g. NACE MR ) please contact factory. -4-
5 Specifications, Cont. Table 5 - Temperature Range for Packing Materials Table 6 - Temperature Range for Flat Gaskets Materials Temperature Limits Materials Temperature Limits FKM Lip Seal -14 to 392 F (-10 to 200 C) Polytetrafluoroethylene (PTFE) -328 to 482 F (-200 to 250 C) Graphite -328 to 1110 F (-200 to 600 C) No asbestos -58 to 392 F (-50 to 200 C) PTFE coated aramidic fiber -328 to 500 F (-200 to 260 C) Graphite + AISI to 1110 F (-200 to 600 C) Table 7 - Temperature Range for Plug Seating Surfaces Materials Temperature Limits Valve Model Stainless steel -321 to 1000 F (-196 to 540 C) Stellite to 1110 F (-150 to 600 C) MM71 MM72 MM81 MM82 Fluoroelastomer (FKM-FPM) Chloroprene (CR) -14 to 392 F (-10 to 200 C) -4 to 194 F (-20 to 90 C) Nitrile (NBR) -13 to 194 F (-25 to 90 C) MM73 MM74 MM83 MM84 Ethylene-Propylene (EPDM) -31 to 320 F (-35 to 150 C) Silicone (VMQ) -58 to 300 F (-50 to 150 C) Polytetrafluoroethylene (PTFE) -328 to 482 F (-200 to 250 C) MM83 MM84 Table 8 - Temperature Range for Diaphragms Materials Chloroprene (CR) NBR Fluorocarbon (FKM-FPM) + polyester Fluorocarbon (FKM-FPM) + polyaramid Ethylene-Propylene (EPDM) Fluorosilicone (FVMQ) Temperature Limits -4 to 194 F (-20 to 90 C) -13 to 194 F (-25 to 90 C) 14 to 302 F (-10 to 150 C) 14 to 392 F (-10 to 200 C) -31 to 320 F (-35 to 150 C) -58 to 300 F (-50 to 150 C) Note: Diaphragm material is selected in order to withstand both temperature and chemical composition of the medium. -5-
6 Table 9 - Valve Body Weights Specifications, Cont. Valve Model Size PN PN PN160 PN 250 lbs kg lbs kg lbs kg lbs kg lbs kg 1" (DN25) MM81-MM83 MM82-MM84 (single seated) 1 1/2" (DN40) " (DN50) " (DN80) " (DN100) " (DN25) /2" (DN40) " (DN50) MM71-MM73 MM72-MM74 (double seated) 3" (DN80) " (DN100) " (DN150) // // // // 8" (DN200) // // // // 10" (DN250) // // // // Table 10 - Actuator Weights Actuator lbs kg
7 MK508MM Flanged Valve Dimensional Drawing B C A Table 11 - Valve Body Sizes and Face-to-Face Dimensions- Double Seated Valves Size B RF A UNI - EN PN10-16 PN25-40 PN160 PN250 1" (DN25) /2" (DN40) " (DN50) " (DN80) " (DN100) " (DN150) // // // // 8" (DN200) // // // // 10" (DN250) // // // // Size B C PN PN PN PN160 PN250 1" (DN25) /2" (DN40) " (DN50) " (DN80) " (DN100) " (DN150) 825 // 317 // // 8" (DN200) 945 // 407 // // 10" (DN250) 995 // 460 // // -7-
8 MK508MM Flanged Valve Dimensional Drawing B C A Table 12 - Valve Body Sizes and Face-to-Face Dimensions- Single Seated Valves A DN B RF UNI - EN PN10-16 PN25-40 PN160 PN250 1" (DN25) /2" (DN40) " (DN50) " (DN80) " (DN100) DN B C PN PN PN PN160 PN250 1" (DN25) /2" (DN40) " (DN50) " (DN80) " (DN100)
9 MK508MM/0815 MK508MM Actuators Actuator 345 The drawings to the left show all our available actuators, which are perfectly interchangeable according to the desired pressure regulation (please refer to Table 3). The table below shows the actuators dimensions. Actuator 245 Actuator 182 Actuator 140 Actuator 120 Table 13 - Actuator Dimensions Actuator Outer Diameter Surface inches mm in 2 cm , , Jordan Valve, a division of Richards Indsutries 3170 Wasson Road Cincinnati, OH (f) info@richardsind.com Jordan Valve reserves the right to make revisions to its product, specifications, literature and related information without notice. Please visit our website at for the latest information on our products.
MK608MM Series. Pressure Regulators Mark 608MM Self-Operated Pressure Regulator. Self-Operated Pressure Reducing Valve. Features
MK608MM Series Self-Operated Pressure Reducing Valve The MK608MM series is a spring loaded, self actuated, direct-operated valve. They are available in 1 up to 10 inches (DN25 through DN250) body sizes.
Direct-operated, Back Pressure Regulating Valve. Features
MK508BPM Series Direct-operated, Back Pressure Regulating Valve The MK508BPM series are spring loaded, self actuated, direct-operated, valves. Pressure relief valves are used to protect the system from
High Capacity Direct Operated Pressure Reducing Valve. Features
MK608UBAN Series High Capacity Direct Operated Pressure Reducing Valve The MK608UBAN series are spring loaded, direct-operated, pressure reducing regulators. Their main function is to regulate the outlet
MK508UBS Series. Back Pressure Regulator MK508UBS. Threaded or Flanged Connections Carbon Steel, Stainless Steel & Alloy Construction.
MK508UBS Series Threaded or Flanged Connections Carbon Steel, Stainless Steel & Alloy Construction The MK508UBS Series are spring loaded, direct-operated, pressure relief valves used downstream of pressure
UBAN Series. Direct operated pressure reducing valve. Suitable for: Air & process gases. Liquids. Steam. Markets: Oil & gas. Blanketing systems
UBAN Series Direct operated pressure reducing valve Suitable for: Air & process gases Liquids Steam Markets: Oil & gas Blanketing systems General industry Power CC0032E - Rev. 2 25/03/2014 UB REGULATORS
Masoneilan* Series Direct-Operated, Pressure Reducing Regulator
GE Oil & Gas Technical Specifications 03/2016 Masoneilan* 171-172 Series Direct-Operated, Pressure Reducing Regulator GE Data Classification : Public ing System 1st 2nd 3rd 1st 2nd 3rd 4th Option 1 7 X
Mark 608 Series. Pressure Regulators Mark 608 Gas Pressure Regulators. Gas Pressure Regulators. Specifications. CRN Registration Number Available
Mark 608 Series Gas Pressure Regulators The 1-1/2" and 2" size Mark 608 valves are for use on large tank blanketing applications or other low pressure gas regulation. In a tank blanketing application,
Mark 79/79MX Series JORDANVALYE. Three-Way Control Valves
Mark 79/79MX Series Three-Way Control Valves The Mark 79 is a pneumatic 3-way control valve for use in either bypass or mixing service. The MK79 utilizes the unique sliding gate trim design to provide
Mark 608BP Series. Pressure Regulators Mark 608BP Gas Pressure Regulators. Balanced Plug Gas Pressure Regulators. Features
Mark 608BP Series Balanced Plug Gas Pressure Regulators The Mark 608BP Balanced Plug Gas Pressure Regulator is the ideal valve for low pressure gas regulation with higher inlet pressures. The selfcontained
V1C Series. Pneumatic Control Valves V1C Series Cage-Guided Control Valves. Cage-Guided Control Valve. Features
V1C Series Cage-Guided Control Valve The V1C cage-guided balanced trim control valve offers high pressures and tight shutoff with the use of standard spring/diaphragm actuators. The balanced cage trim
Fisher YD and YS Control Valves
Product Bulletin D100031X012 Fisher YD and YS Control Valves Fisher YD (figure 1) and YS three-way cage-guided valves are designed for throttling or flow-switching (on-off) service, and are available in
Jordan Control Valve Series
Jordan Control Valve Series JCVS Globe Style Control Valves Mark ED and ET Globe Style Control Valves The Mark ED and ET are single port, globe style bodies with composition or metal seats, and a balanced
Pneumatic Control Valves Mark 70 Sliding Gate Control Valves. Sliding Gate Control Valves. 3L/T-2R/S33 Series Mark 70 Series.
3L/T-2R/S33 Series Mark 7 Series Sliding Gate Control Valves The Mark 7 Series is a line of pneumatically-operated diaphragm control valves that combine multiple spring actuators with the precision of
Mark 675 Series. Pressure Regulators Mark 675 Pressure Regulators. Self-Operated Pressure Regulators. Mark 675 Features
Mark 675 Series Self-Operated Pressure Regulators The Mark 675 Wafer Style Sliding Gate Pressure Regulator is used to regulate the downstream pressure to a predetermined setpoint. The spring in the Mark
Mark 695 Series. Pressure Regulators Mark 695 Piloted Tank Blanketing Regulators. Piloted Tank Blanketing Regulator 3/4"- 1" Optional Features
Mark 695 Series Piloted Tank Blanketing Regulator 3/4"- 1" The Mark 695 Series piloted soft seat regulator was designed specifically to provide accurate pressure control on very low pressure tank blanketing
Pneumatic Control Valves Mark 70 Sliding Gate Control Valves. Sliding Gate Control Valves. 3L/T-2R/S33 Series Mark 70 Series.
3L/T-2R/S33 Series Mark 7 Series Sliding Gate Control Valves The Mark 7 Series is a line of pneumatically-operated diaphragm control valves that combine multiple spring actuators with the precision of
Type MR108 Direct-Operated Backpressure Regulators
July 2016 Type MR108 Direct-Operated Backpressure Regulators P1202_1 P1203_1 Type mr108 with low-pressure Actuator Type mr108 with high-pressure actuator Figure 1. Type MR108 Direct-Operated Backpressure
Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 462 Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 461.16-E Available designs 40 18 Cap H2 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring
Mark 50 Series. Back Pressure Regulators Mark 50 Self-Operated Back Pressure Regulators. Self-Operated Back Pressure Regulators.
Mark 50 Series Self-Operated Back Pressure Regulators The Mark 50 Sliding Gate Back Pressure Regulator is used to regulate upstream pressure at a predetermined setpoint. The spring in the Mark 50 holds
Mark 63/64 Series. Pressure Regulators Mark 63/64 Differential Pressure Regulators. Differential Pressure Regulators. Features
Mark 63/64 Series Differential Pressure Regulators The Jordan Mark 63 is designed to maintain a constant differential between the pressure on the discharge side of the regulator and the signal pressure
Design GX Control Valve and Actuator System
Product Bulletin Design GX Control Valve and Actuator System The Fisher Design GX is a compact, state-of-the-art control valve and actuator system, designed to control a wide range of process liquids,
Fisher YD and YS Control Valves
YD and YS Valves Product Bulletin Fisher YD and YS Control Valves Fisher YD and YS three-way cage-guided valves are designed for throttling or flow-switching (on-off) service, and are available in the
Series 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
T205 Series Tank Blanketing Regulators
T205 Series Tank Blanketing Regulators Bulletin 74.1:T205 September 2013 Figure 1. Type T205 Tank Blanketing Regulator Contents Features...1 Introduction...2 Specifi cations...2 Principle of Operation...2
Mark 75HW Series. Hand Operated Valves Mark 75 Pneumatic Control Valves. Wafer Style Hand Operated Valves. Size and Price Advantage
Mark 75HW Series Wafer Style Hand Operated Valves The Mark 75HW is a manually operated, sliding gate control valve. The wafer style body provides great value for the end user while offering all of the
UNIWORLD series PNEUMATIC VALVES
UNIWORLD series PNEUMATIC VALVES 5100AD/E 07 2013 SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME
Mark 80. Self-Operated Temperature Regulators. Temperature Regulators Mark 80 Self-Operated Temperature Regulators FEATURES
Mark 80 Self-Operated Temperature Regulators The MK80 Series is completely self-operated and requires no external power source or other expensive instrumentation to operate the valve. The operation of
Mark 89/89MX Series. Temperature Regulators Mark 89/89MX Three-Way Temperature Regulators. Three-Way Temperature Regulators.
Mark 89/89MX Series Three-Way Temperature Regulators The Mark 89 is used for diverting service and is ideal for bypassing fluids around coolers or filters. In this configuration, there is one inlet and
Baumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves
24000CVF and 24000SVF Valves Product Bulletin Baumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves The Baumann 24000CVF and 24000SVF line of control valves can be utilized for the
Masoneilan* 215X1 Series Control Valve
GE Oil & Gas Technical Specifications 05/2013 Masoneilan* 215X1 Series Control Valve UOP Lock Hopper Over Travel Control Valves Table of Contents Features...3 General Data...4 Numbering System...5 Temperature
Mark 5108 Series. Back Pressure Regulating Valves Mark 5108 Series. Back Pressure Regulating Valves. Valve Features. Operation
Mark 5108 Series Back Pressure Regulating Valves In many liquid piping systems, it is vital that line pressure is maintained within relatively narrow limits. The Mark 5108 is designed to do just that.
Honeywell EN REV. 2 09/2014 Page 1 of 10 Specification
Series 9110 Single/Double Seated Globe Valves for ANSI 150-600 DIN/BS 4504 PN10-PN40 Honeywell 70-16-10-05 EN REV. 2 09/2014 Page 1 of 10 Specification Series 9110 Single/Double Seated Globe Valves for
BOSS Series D Control Valve
Applications Process control systems for food, pulp and paper, chemical, petrochemical & other industries HVAC systems Feed water and fuel system controls in boiler rooms Packaged systems (OEM) such as
T205 Series Tank Blanketing Regulators
Bulletin 74.1 D103747X012 T205 Series June 2018 T205 Series Tank Blanketing Regulators Figure 1. Type T205 Tank Blanketing Regulator Contents Features... 1 Introduction.... 1 Specifications... 2 Principle
Series 240 Type 3351 Pneumatic On/off Valve
Series 240 Type 3351 Pneumatic On/off Valve Application Shut-off valve with tight shut-off for liquids, gases and vapors according to DIN or ANSI standards Valve size DN 15 to 100 NPS ½ to 4 Pressure rating
41005 Series Control Valves. Specification Data CH /10
Putting You In Control Specification ata CH41005 11/10 41005 Series Control Valves Complete Line of Heavy uty, Balanced, Cage Guided, Globe Valves with Lo-dB Anti-Cavitation Capabilities resser Masoneilan
VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1
SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators
Type MR108 Direct-Operated Backpressure Regulators
August 2013 Type MR108 Direct-Operated Backpressure Regulators P1202 P1203 TYPE MR108 WITH LOW- ACTUATOR TYPE MR108 WITH HIGH- ACTUATOR Figure 1. Type MR108 Direct-Operated Backpressure Regulators Contents
21000 Series Control Valves
GE Oil & Gas Technical Specifications 09/2012 Masoneilan * Valves 21000 Series Control Valves Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB * & Anti-Cavitation Capabilities Table of Contents
Single Seated Globe Control Valves
Product 1: Top Guided Single Seated Control Valves Type: Globe Size: 1-1/2'', 2'', 2-1/2'', 3'', 4'', 6''and 8 (DN40 DN200) Pressure Rating: ANSI 125 ~ ANSI 600 (PN16~PN64, JIS10K~JIS40K) Body Material:
Model 380/381 Control Valves
Features High Quality Construction Dyna-Flo uses only materials that have been proven to provide superior, trouble free performance. All materials comply with ASME and ASTM specifications. Versatility
Mark 70 Series. Sliding Gate Control Valves. Pneumatic Control Valves Mark 70 Sliding Gate Control Valves MARK 70 FEATURES
Mark 7 Series Sliding Gate Control Valves The MK7 Series is a line of pneumatically-operated diaphragm control valves that combine multiple spring actuators with the precision of Jordan Valve s advanced
Control Valves & Regulators
Control Valves & Regulators Sliding Gate Valves Pressure Regulators Temperature Regulators Control Valves Positioners Jordan Valve sliding gate regulators and control valves are excellent choices for many
Fisher GX Control Valve and Actuator System
Product Bulletin D103171X012 GX Control Valve and Actuator Fisher GX Control Valve and Actuator System The Fisher GX is a compact, state-of-the-art control valve and actuator system, designed to control
21000 Series. Masoneilan* Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB* and Anti-Cavitation Capabilities
GE Oil & Gas Technical Specifications 02/2016 Masoneilan* 21000 Series Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB* and Anti-Cavitation Capabilities Table of Contents Numbering System...3
O-Rings & Circlips Catalogue
O-Rings & Circlips Catalogue 1 2 Contents O-Rings Table of Groove Dimensions for Dynamic & Static Sealing... 4 Resistance Properties of Various Elastomers... 5 Temperature Requirements... 6 Imperial: Guide
Type Pneumatic Control Valve Type 3525 Globe Valve
Type 355-1 Pneumatic Control Valve Type 355 Globe Valve Application Dump valve designed for use in high-pressure on/off applications in upstream oil and gas production. Valve size NPS 1 to 3 Pressure rating
Item Component Remarks Type 4393 Type ), SA Vulcanized soft seal disc SA L SA L
Available designs materials Materials Item Component Remarks 3 4 1 Base / Inlet body 2 Outlet body Threaded connection Flange connection 2.1 Outlet adaptor Flange connection 2.4 Outlet flange Flange connection
Fisher HP Series Control Valves
Product Bulletin D0635X0 Fisher HP Series Control s HP (Globe ) HPA (Angle ) Balanced High-Temperature Trim Balanced Tight Shutoff Trim Unbalanced Trim Fisher HP Series control valves (figure ) are single-port,
Control valves with pneumatic actuators up to 350 C PN
300 540 1080 2 Features Suitable in building and process engineering for various mediums 0...+200 C Suitable with stuffing box extension or stem seal with stainless steel bellow to 10...+350 C and for
Fisher CAV4 Control Valve
Fisher CAV4 Control Valve CAV4 (globe) CAV4 (NPS 2) CAV4 (angle) CAV4 (NPS 2 through 6) CAV4 Series Valves The Fisher CAV4 control valve with Cavitrol IV trim is designed specifically for liquid applications,
Mark 6127 Series. Pressure Regulators Mark 6127 Series. Pressure Reducing Valves. Valve Features. Operation
Mark 6127 Series Pressure Reducing Valves The primary function of the Mark 6127 is to reduce a greater upstream pressure to a lesser, more manageable downstream pressure, operating without regard to either
Fisher CV500 Rotary Control Valve
Product Bulletin D101606012 Fisher CV500 Rotary Control Valve CV500 Valve The Fisher CV500 Cam Vee Ball control valve combines the rangeability of the cammed-segmented V-notched ball, with the inherent
Fisher CV500 Rotary Globe Control Valve
CV500 Valve D101606012 Product Bulletin Fisher CV500 Rotary Globe Control Valve The Fisher CV500 Cam Vee-Ball control valve combines the rangeability of the cammed-segmented V-notched ball, with the inherent
Baumann 24000S Stainless Steel Control Valve
24000S Valve Product Bulletin Baumann 24000S Stainless Steel Control Valve The Baumann 24000S versatile, pneumatic, control valve may be used for the control of pressure, temperature, level, and flow.
Self-operated Pressure Regulators Type Universal Pressure Reducing Valve
Self-operated Pressure Regulators Type 41-23 Universal Pressure Reducing Valve ANSI version Application Pressure regulators for set points from 0.75 to 400 psi (0.05 to 28 bar) Valves in NPS ½ to 4 (DN
570, 571, 573 Control Valves
Features Valve Sizes and Connections The 2, 3, 4, 6, and 8 flangeless valves will mate ANSI, 300, and 600 raised face flanges. The 2, 3 4, 6, 8, 10, and 12 RF flanged 571 and 573 will mate with ASME (571)
Fisher GX 3-Way Control Valve and Actuator System
GX 3-Way Valve and Actuator Product Bulletin Fisher GX 3-Way Control Valve and Actuator System The Fisher GX 3-Way is a compact, state-of-the-art control valve and actuator system, designed to accurately
Mark 60 Series. Pressure Regulators Mark 60 Pressure Regulators. Self Operated Pressure Regulators. CRN Registration Number Available
Mark 60 Series Self Operated Pressure Regulators The Mark 60 Sliding Gate Pressure Regulator is used to regulate the downstream pressure to a predetermined setpoint. The spring in the Mark 60 holds the
Fisher 8532 High-Performance Butterfly Valve
8532 Valve Product Bulletin Fisher 8532 High-Performance Butterfly Valve The Fisher 8532 high-performance butterfly valve provides outstanding performance under extreme pressure and temperature conditions.
Baumann Corrosion Resistant Control Valve
Product Bulletin D103337X012 Baumann 26000 Corrosion Resistant Control Valve The Baumann 26000 (figures 1 and 2) is a unique corrosion resistant control valve featuring a flangeless wafer valve body and
Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure
Series Thermal Relief Safety Valves Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure Applications The Sempell series provides a complete and comprehensive range
Pressure Regulators RHPS Series
Pressure Regulators Series 1 www.swagelok.com Pressure Regulators Series Pressure-reducing models Back-pressure models Spring-, dome-, and air-loaded 1/4 to 4 in. end connections Working pressures up to
Type 441 CATALOG. Flanged Safety Relief Valves. The-Safety-Valve.com
Type 441 Flanged Safety Relief Valves CATALOG The-Safety-Valve.com General Information LESER India Safety Relief Valves The safety valve Type 441 represents High capacity related to the safety valve size
Compact. performance. Threaded Safety Relief Valves. Series 437 Type Series 459 Type CATALOG.
Compact performance Threaded Safety Relief Valves Series 437 Type 437 438 439 Series 459 Type 459 46 CATALOG The Safety Valve Series 459 Packed lever H4 Series 459 Balanced bellows design Series 459 Cap
Fisher GX Control Valve and Actuator System
GX Control Valve and Actuator Product Bulletin Fisher GX Control Valve and Actuator System The Fisher GX is a compact, state-of-the-art control valve and actuator system, designed to control a wide range
HELYON PRESSURE REDUCING VALVE MODEL M1
PRESSURE REDUCING VALVE MODEL - 5 Chemin du Jubin 69570 DARDILLY MAIN CHARACTERISTICS The model is self-operated bellows sealed pressure reducing valve. This series of regulators is suitable for steam,
Mark 78 Series. Control Valves Mark 78 Globe Style Control Valves. Globe Style Control Valve. Function. Features. CRN Registration Number Available
Mark 78 Series Globe Style Control Valve The Mark 78 pneumatic control valve is designed for accurate performance and simplified maintenance. This versatile product can be used on a variety of applications,
GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE
GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE 1-6940 Cryo valves are especially designed for cryogenic service. The construction is the same of 1-6941 and 1-6943 standard globe valves with the exception of
Fisher 8532 High-Performance Butterfly Valve
8532 Valve Product Bulletin Fisher 8532 High-Performance Butterfly Valve The Fisher 8532 high-performance butterfly valve provides outstanding performance under extreme pressure and temperature conditions.
Fisher CAV4 Control Valve
CAV Valve Product Bulletin Fisher CAV Control Valve The Fisher CAV control valve with Cavitrol IV trim is designed specifically for liquid applications, such as boiler feedwater recirculation, where pressure
CONTROL VALVE STANDARD SPECIFICATION
CONTROL VALVE STANDARD SPECIFICATION ON-OFF 2,3-WAY GLOBE VALVE YAD-112Q1/11231 Series YAC-31231 Series YAC-31281 Series http://www.proval.co.kr [B-8] GENERAL The single soft seat control valves are designed
Balanced and Multi-stage Trim Options for SPIRA-TROL Two-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Mark 33 Series. Control Valves Mark 33/39 Electric Motor Control Valves. Electric Motor Control Valves. Features. CRN Registration Number Available
Mark 33 Series Electric Motor Control Valves The Mark 33 is a motor operated valve featuring the Jordan sliding gate seat and heavy-duty industrial motors for proportional (resistance), on-off, 4-20mA
Balanced and Multi-stage Trim Options for SPIRA-TROL Two-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Fisher CAV4 Control Valve
Product Bulletin D10197X012 Fisher CAV Control Valve CAV Valve The Fisher CAV control valve (figure 1) with Cavitrol IV trim is designed specifically for liquid applications, such as boiler feedwater recirculation,
Balanced and Multi-stage Trim Options for Spira-trol TM Two-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
35002 Series Camflex * II Rotary Control Valves
GE Oil & Gas Technical Specifications 09/2012 Masoneilan * Valves 35002 Series Camflex * II Rotary Control Valves The 35002 Series Camflex II Eccentric Plug Rotary Control Valve features an extension bonnet,
Jordan Control Valve Series
Jordan Control Valve Series Control Valves A control valve is used to manipulate flowing fluids like, gas, water, steam or process solutions. It compensates for changes in flow or pressure and regulates
Fisher V500 Rotary Control Valve
Product Bulletin D100054012 Fisher V500 Rotary Control Valve V500 Valve The Fisher V500 eccentric plug rotary control valve controls erosive, coking, and other hard-to-handle fluids, providing either throttling
Fisherr GX Control Valve and Actuator System
Product Bulletin D103171X012 GX Control Valve and Actuator Fisherr GX Control Valve and Actuator System The Fisher GX is a compact, state-of-the-art control valve and actuator system, designed to control
Series 07 Single/Double Seated Globe Valves for ANSI (PN20-100) DIN/BS 4504 PN10-PN100
Technical Bulletin B-070 Series 07 Single/Double Seated Globe Valves for ANSI 150 600 (PN20-100) DIN/BS 4504 PN10-PN100 Series 07 Features General The Series 07 control valves has been developed to provide
KOSO HAMMEL DAHL. Specifications. Body Size: Globe - 1/2" through 6" ( mm). Angle - 1/2" through 2" (15-50 mm).
control valves KOSO HAMMEL DAHL B U L L E T I N G 1 3 0-1 FEATURES Cage-retained quick change seat ring simplifies maintenance. Metal seats for a variety of services and ANSI IV and V shutoff. Soft seat
JSRLP Series Low Pressure Reducing Valves for Bio-Pharm Gas Applications
JSRLP Series Low Pressure Reducing Valves for Bio-Pharm Gas Applications JSRLP is a high purity gas low pressure regulator designed and built specifically for hygienic, ASME BPE gas applications. The JSRLP
Series 2000 Top Guided Control Valve
Series 2000 Top Guided Control Valve Series 2000 Control Valve Series 2000 process Control Valves. Sturdy design with special service trims available for: Cavitation Control Noise Reduction Top entry construction
CONTROL VALVE STANDARD SPECIFICATION
CONTROL VALVE STANDARD SPECIFICATION QUICK CHANGE TYPE 2-WAY GLOBE VALVE YAD-122Q1 Series http://www.proval.co.kr PROVAL Co., Ltd. [B-1] TOP GUIDE SINGLE SEATED TYPE GENERAL The design of Quick Change
MR98 Series Backpressure Regulators, Relief and Differential Relief Valves
MR98 Series Backpressure Regulators, Relief and Differential Relief Valves January 2014 P1753 TyPE MR98H P1757 TyPE MR98L Figure 1. Typical MR98 Series Backpressure Regulators, Relief and Differential
Fisher A31D Double-Flange High-Performance Butterfly Valve
A31D Valve Product Bulletin Fisher A31D Double-Flange High-Performance Butterfly Valve The Fisher A31D double-flange high-performance butterfly valve provides outstanding performance under extreme pressure
Fisher A31D Double-Flange High-Performance Butterfly Valve
A31D Valve Product Bulletin Fisher A31D Double-Flange High-Performance Butterfly Valve The Fisher A31D double-flange high-performance butterfly valve provides outstanding performance under extreme pressure
JSBLF Series Compact, High Purity Low Flow Back Pressure Regulating Valve
JSBLF Series Compact, High Purity Low Flow Back Pressure Regulating Valve The JSBLF is a fully drainable compact back pressure regulator designed and built specifically for hygienic, ASME BPE low flow
JSRHF Series. Sanitary Valves JSRHF Series High Flow Pressure Reducing Valves. High Flow Bioprocess Clean Gas Pressure Reducing Valves
JSRHF Series High Flow Bioprocess Clean Gas Pressure Reducing Valves The JSRHF Series high purity gas pressure regulator was designed and built specifically for Bio-Pharma gas applications. Traditionally,
Baumann 24000C Carbon Steel Little Scotty Control Valve Instructions
Instruction Manual D103356X012 24000C Control Valve Baumann 24000C Carbon Steel Little Scotty Control Valve Instructions CONTENTS Introduction...1 Scope...1 Safety Precautions...1 Maintenance...2 Flow
2900 MPV Series. Consolidated * Valves. Pilot-Operated Safety Relief Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 2900 MPV Series Pilot-Operated Safety Relief Valve A unique design that combines top performance, capabilities and features within an
HIGH TEMPERATURE HIGH PRESSURE CONTROL VALVES SERIES
HIGH TEMPERATURE HIGH PRESSURE CONTROL VALVES 1-4470 SERIES - 2 - DESCRIPTION HIGH TEMPERATURE HIGH PRESSURE CONTROL VALVES 1-4470 SERIES Parcol 1-4470 High Temperature High Pressure Control Valves represent
Series 2200 and 2220 Control Valves
Series 2200 and 2220 Control Valves Space-Saving Solution: Yokeless design fits tight separator and scrubber applications Series 2200 Series 2220 Norriseal Series 2200 and 2220 control valves have been
SAFETY relief VALVE SERIES # 006 DESIGN FEATURES HARSHAD ENGINEERING WORKS HARSHAD ENGINEERING WORKS TECHNICAL DATA : ISO 9001 CERTIFIED COMPANY
PROVIDES HIGH QUALITY OVERPRESSURE PROTECTION FOR AIR, GAS, LIQUID & STEAM IN SINGLE STANDARDIZED DESIGN SAFETY relief VALVE DESIGN FEATURES SAFETY VALVE MANUFACTURED IN ACCORDANCE WITH REQUIREMENT OF
Series 2003 / Three-way control valve. Features. Wörth am Main
Series 2003 / 2013 Three-way control valve SPECIFICATION The Series 2003 / 2013 comprises a range of skirt guided Three-way mixing (2003) and diverting valves (2013). Available in a variety of sizes, they
ANSI version. The valve closes when the differential pressure rises
Self-operated Regulators Series 42 Differential Pressure Regulator with Type 2424/Type 2428 Actuator and Type 2422 Valve Type 42-24 A Type 42-24 B Type 42-28 A Type 42-28 B ANSI version Application For
JSRHF Series. Sanitary Valves JSRHF Series High Flow Pressure Reducing Valves. High Flow Bioprocess Clean Gas Pressure Reducing Valves
JSRHF Series High Flow Bioprocess Clean Gas Pressure Reducing Valves The JSRHF Series high purity gas pressure regulator was designed and built specifically for Bio-Pharma gas applications. Traditionally,