MK608MM Series. Pressure Regulators Mark 608MM Self-Operated Pressure Regulator. Self-Operated Pressure Reducing Valve. Features
|
|
|
- Rosalind Hodge
- 6 years ago
- Views:
Transcription
1 MK608MM Series Self-Operated Pressure Reducing Valve The MK608MM series is a spring loaded, self actuated, direct-operated valve. They are available in 1 up to 10 inches (DN25 through DN250) body sizes. These regulators feature a construction capable of sustaining rugged use and their construction makes them easy to install and to maintain. Features Flow to open design Available with Standard ISA Face to face dimensions 3 different trim sizes for each body size to meet a wide range of applications Quick-opening flow characteristic Trim features Hard or Soft tightness, single or double seated Leakage Classes range from II up to VI (according to /FCI 70-3) External pressure sensing Stem packing options are elastomeric (lip seal) or Graphite gasket Wide range of actuators according to the requested regulation range Wide range of elastomeric diaphragms. Jordan Valve a division of Richards Industries 3170 Wasson Road Cincinnati, OH (f) info@richardsind.com Pressure Regulators Mark 608MM Self-Operated Pressure Regulator
2 Specifications Sizes: 1" through 10" (DN25 through DN250) End Connections: Flanged standard, SW and BW available on application Body Material: Carbon steel, Stainless Steel, other materials available on application Trim Material: Stainless steel standard, other materials available on application Diaphraghm Material: Polychloroprene, EPDM, FKM, FVQM, Stainless Steel, other materials on application. Seats: Single or Double Cv (Kv): (5,2-735,3) Spring Ranges psig (barg): 0.07 psig psig (0,0045 barg - 31 barg) Shutoff: Class II to Class VI (per FCI 70-3) Service: Gas, Steam, Liquids (see Table 1) Table 1 - Fluid Applications Gas Steam/Vapor Liquids Air, inert gas, CO2, CO, hydrocarbons, O2, H2, F, NH3 Water Steam, alcoholic vapors, organic vapors, sulphuric acid, refrigerating vapor Water, aqueous solutions, hydrocarbons, alcohol, lubricating oils, diathermic oils, solvents, refrigerating fluids, acrylic compounds -2-
3 Specifications, Cont. Table 2 - Cv (Kv) Values Trim Size Seat diameter DN (mm) /2" 16,5/14,5 6 (5,2) 3/4" 20,5/18,5 9 (7,8) 9 (7,8) 1" 25/23 13 (11,2) 18 (15,6) 18 (15,6) 1 1/2" 40/38 40 (34,6) 43 (37,2) 43 (37,2) 64 (55,4) 2" 50/48 54 (46,7) 64 (55,4) 128 (110,7) 128 (110,7) 3" 70/ (96,9) 204 (176,5) 240 (176,5) 240 (176,5) 4" 90/ (372) 440 (380,6) 6" 135/ (536,3) 440 (380,6) 8" 180/ (622,8) 10" 225/ (735.3) Table 3 - Actuator Spring Ranges Actuator Elastomeric Packing Minimum Graphite Packing Maximum Maximum allowable pressure psig (4,00 barg) 178 psig (12,3 barg) 390 psig (26,9 barg) 445 psig (31 barg) psig (2,00 barg) 88 psig (6,1 barg) 222 psig (15,3 barg) 249 psig (17 barg) psig (0,90 barg) 39 psig (2,7 barg) 99psig (6,8 barg) 112 psig (7,7 barg) psig (0,380 barg) 16 psig (1,1 barg) 42.1 psig (2,9 barg) 47.0 psig (3,2 barg) 345* 0.07 psig (0,0045 barg) 6.8 psig (0,47 barg) 17.4 psig (1,2 barg) 26.5 psig (1,8 barg) *With Soft Seats. For tank blanketing application. Actuator spring ranges are based on the following assumptions: - Stroke from setpoint is ±.275 in/ 7 mm - Offset max 33% for minimum set pressure - Low unbalancing forces on the plug - Leakage class IV for S1, II for S2, medium sized trims. Resilient (elastometric) seat leakage performance not taken into account for min. set pressure evaluation -3-
4 Specifications, Cont. Table 4 - Material Combination Body Carbon steel (AF2) 316 SS (IF2) Full 316 SS (IF3) -20 F T 800 F -20 F T 1000 F -321 F T 1000 F (-29 C T 427 C) (-29 C T 540 C) (-196 C T 540 C) Body ASME SA-216 WCC ASME SA-351 CF8M ASME SA-351 CF8M Bonnet ASME SA-216 WCC ASME SA-351 CF8M ASME SA-351 CF8M Inferior Cover ASME SA-216 WCC ASME SA-351 CF8M ASME SA-351 CF8M Packing See Table 5 Gaskets set See Table 6 Trim Seat ASME A ASME A ASTM A Plug ASME A ASME A ASTM A Plug Seating Surface See Table 7 Guide ASTM A PH ASTM A.276/A-479 UNS S21800 ASTM A.276/A-479 UNS S21800 Actuator Actuator Cover ASME SA-216 WCC ASME SA-351 CF8M ASME SA-351 CF8M Yoke ASME SA-216 WCC ASME SA-216 WCC ASME SA-351 CF8M Spring ASTM A-401 ASTM A-401 ASTM A Diaphragm See Table 8 Note: - SS = Stainless Steel - Carbon steel parts are painted according to Richards Inustries internal procedures - NACE material requirements: these material combinations meet the requirements of NACE MR 0103, non exposed conditions (par. 5.3). In case of exposed conditions (par. 5.2), or a different standard (e.g. NACE MR ) please contact factory. -4-
5 Specifications, Cont. Table 5 - Temperature Range for Packing Materials Table 6 - Temperature Range for Flat Gaskets Materials Temperature Limits Materials Temperature Limits FKM Lip Seal -14 to 392 F (-10 to 200 C) Polytetrafluoroethylene (PTFE) -328 to 482 F (-200 to 250 C) Graphite -328 to 1110 F (-200 to 600 C) No asbestos -58 to 392 F (-50 to 200 C) PTFE coated aramidic fiber -328 to 500 F (-200 to 260 C) Graphite + AISI to 1110 F (-200 to 600 C) Table 7 - Temperature Range for Plug Seating Surfaces Materials Temperature Limits Valve Model Stainless steel -321 to 1000 F (-196 to 540 C) Stellite to 1110 F (-150 to 600 C) MM71 MM72 MM81 MM82 Fluoroelastomer (FKM-FPM) Chloroprene (CR) -14 to 392 F (-10 to 200 C) -4 to 194 F (-20 to 90 C) Nitrile (NBR) -13 to 194 F (-25 to 90 C) MM73 MM74 MM83 MM84 Ethylene-Propylene (EPDM) -31 to 320 F (-35 to 150 C) Silicone (VMQ) -58 to 300 F (-50 to 150 C) Polytetrafluoroethylene (PTFE) -328 to 482 F (-200 to 250 C) MM83 MM84 Table 8 - Temperature Range for Diaphragms Materials Chloroprene (CR) NBR Fluorocarbon (FKM-FPM) + polyester Fluorocarbon (FKM-FPM) + polyaramid Ethylene-Propylene (EPDM) Fluorosilicone (FVMQ) Temperature Limits -4 to 194 F (-20 to 90 C) -13 to 194 F (-25 to 90 C) 14 to 302 F (-10 to 150 C) 14 to 392 F (-10 to 200 C) -31 to 320 F (-35 to 150 C) -58 to 300 F (-50 to 150 C) Note: Diaphragm material is selected in order to withstand both temperature and chemical composition of the medium. -5-
6 Specifications, Cont. Table 9 - Valve Body Weights Valve Model Size PN PN PN160 PN 250 lbs kg lbs kg lbs kg lbs kg lbs kg 1" (DN25) /2" (DN40) Single Seated 2" (DN50) " (DN80) " (DN100) " (DN25) /2" (DN40) " (DN50) Double Seated 3" (DN80) " (DN100) " (DN150) // // // // 8" (DN200) // // // // 10" (DN250) // // // // Table 10 - Actuator Weights Actuator lbs kg
7 MK608MM Flanged Valve Dimensional Drawing B C Table 11 - Valve Body Sizes and Face-to-Face Dimensions- Double Seated Valves A Size B RF A UNI - EN PN10-16 PN25-40 PN160 PN250 1" (DN25) /2" (DN40) " (DN50) " (DN80) " (DN100) " (DN150) // // // // 8" (DN200) // // // // 10" (DN250) // // // // Size B C PN PN PN PN160 PN250 1" (DN25) /2" (DN40) " (DN50) " (DN80) " (DN100) " (DN150) 825 // 317 // // 8" (DN200) 945 // 407 // // 10" (DN250) 995 // 460 // // -7-
8 MK608MM Flanged Valve Dimensional Drawing B C Table 12 - Valve Body Sizes and Face-to-Face Dimensions- Single Seated Valves A A DN B RF UNI - EN PN10-16 PN25-40 PN160 PN250 1" (DN25) /2" (DN40) " (DN50) " (DN80) " (DN100) DN B C PN PN PN PN160 PN250 1" (DN25) /2" (DN40) " (DN50) " (DN80) " (DN100)
9 MK608MM/1015 MK608MM Actuators Actuator 345 The diagrams to the left show the available actuators, which are interchangeable according to the desired pressure range (please refer to Table 3). The table below shows the actuators dimensions. Actuator 245 Actuator 182 Actuator 140 Actuator 120 Table 12 - Actuator Dimensions Actuator Outer Diameter Surface inches mm in 2 cm , , Jordan Valve, a division of Richards Indsutries 3170 Wasson Road Cincinnati, OH (f) info@richardsind.com Jordan Valve reserves the right to make revisions to its product, specifications, literature and related information without notice. Please visit our website at for the latest information on our products.
MK508MM Series. Back Pressure Regulators Mark 508MM Self-Operated Back Pressure Regulators. Self-Operated Back Pressure Regulators.
MK508MM Series Self-Operated Back Pressure Regulators The MK508MM series are spring loaded, self actuated, direct-operated valves. The Mark 508MM Back Pressure Regulating Valves regulate upstream pressure
Direct-operated, Back Pressure Regulating Valve. Features
MK508BPM Series Direct-operated, Back Pressure Regulating Valve The MK508BPM series are spring loaded, self actuated, direct-operated, valves. Pressure relief valves are used to protect the system from
High Capacity Direct Operated Pressure Reducing Valve. Features
MK608UBAN Series High Capacity Direct Operated Pressure Reducing Valve The MK608UBAN series are spring loaded, direct-operated, pressure reducing regulators. Their main function is to regulate the outlet
MK508UBS Series. Back Pressure Regulator MK508UBS. Threaded or Flanged Connections Carbon Steel, Stainless Steel & Alloy Construction.
MK508UBS Series Threaded or Flanged Connections Carbon Steel, Stainless Steel & Alloy Construction The MK508UBS Series are spring loaded, direct-operated, pressure relief valves used downstream of pressure
UBAN Series. Direct operated pressure reducing valve. Suitable for: Air & process gases. Liquids. Steam. Markets: Oil & gas. Blanketing systems
UBAN Series Direct operated pressure reducing valve Suitable for: Air & process gases Liquids Steam Markets: Oil & gas Blanketing systems General industry Power CC0032E - Rev. 2 25/03/2014 UB REGULATORS
Masoneilan* Series Direct-Operated, Pressure Reducing Regulator
GE Oil & Gas Technical Specifications 03/2016 Masoneilan* 171-172 Series Direct-Operated, Pressure Reducing Regulator GE Data Classification : Public ing System 1st 2nd 3rd 1st 2nd 3rd 4th Option 1 7 X
Mark 608 Series. Pressure Regulators Mark 608 Gas Pressure Regulators. Gas Pressure Regulators. Specifications. CRN Registration Number Available
Mark 608 Series Gas Pressure Regulators The 1-1/2" and 2" size Mark 608 valves are for use on large tank blanketing applications or other low pressure gas regulation. In a tank blanketing application,
Mark 79/79MX Series JORDANVALYE. Three-Way Control Valves
Mark 79/79MX Series Three-Way Control Valves The Mark 79 is a pneumatic 3-way control valve for use in either bypass or mixing service. The MK79 utilizes the unique sliding gate trim design to provide
Mark 608BP Series. Pressure Regulators Mark 608BP Gas Pressure Regulators. Balanced Plug Gas Pressure Regulators. Features
Mark 608BP Series Balanced Plug Gas Pressure Regulators The Mark 608BP Balanced Plug Gas Pressure Regulator is the ideal valve for low pressure gas regulation with higher inlet pressures. The selfcontained
Mark 675 Series. Pressure Regulators Mark 675 Pressure Regulators. Self-Operated Pressure Regulators. Mark 675 Features
Mark 675 Series Self-Operated Pressure Regulators The Mark 675 Wafer Style Sliding Gate Pressure Regulator is used to regulate the downstream pressure to a predetermined setpoint. The spring in the Mark
V1C Series. Pneumatic Control Valves V1C Series Cage-Guided Control Valves. Cage-Guided Control Valve. Features
V1C Series Cage-Guided Control Valve The V1C cage-guided balanced trim control valve offers high pressures and tight shutoff with the use of standard spring/diaphragm actuators. The balanced cage trim
Mark 63/64 Series. Pressure Regulators Mark 63/64 Differential Pressure Regulators. Differential Pressure Regulators. Features
Mark 63/64 Series Differential Pressure Regulators The Jordan Mark 63 is designed to maintain a constant differential between the pressure on the discharge side of the regulator and the signal pressure
Pneumatic Control Valves Mark 70 Sliding Gate Control Valves. Sliding Gate Control Valves. 3L/T-2R/S33 Series Mark 70 Series.
3L/T-2R/S33 Series Mark 7 Series Sliding Gate Control Valves The Mark 7 Series is a line of pneumatically-operated diaphragm control valves that combine multiple spring actuators with the precision of
Jordan Control Valve Series
Jordan Control Valve Series JCVS Globe Style Control Valves Mark ED and ET Globe Style Control Valves The Mark ED and ET are single port, globe style bodies with composition or metal seats, and a balanced
Pneumatic Control Valves Mark 70 Sliding Gate Control Valves. Sliding Gate Control Valves. 3L/T-2R/S33 Series Mark 70 Series.
3L/T-2R/S33 Series Mark 7 Series Sliding Gate Control Valves The Mark 7 Series is a line of pneumatically-operated diaphragm control valves that combine multiple spring actuators with the precision of
Mark 695 Series. Pressure Regulators Mark 695 Piloted Tank Blanketing Regulators. Piloted Tank Blanketing Regulator 3/4"- 1" Optional Features
Mark 695 Series Piloted Tank Blanketing Regulator 3/4"- 1" The Mark 695 Series piloted soft seat regulator was designed specifically to provide accurate pressure control on very low pressure tank blanketing
Fisher YD and YS Control Valves
Product Bulletin D100031X012 Fisher YD and YS Control Valves Fisher YD (figure 1) and YS three-way cage-guided valves are designed for throttling or flow-switching (on-off) service, and are available in
Design GX Control Valve and Actuator System
Product Bulletin Design GX Control Valve and Actuator System The Fisher Design GX is a compact, state-of-the-art control valve and actuator system, designed to control a wide range of process liquids,
Mark 75HW Series. Hand Operated Valves Mark 75 Pneumatic Control Valves. Wafer Style Hand Operated Valves. Size and Price Advantage
Mark 75HW Series Wafer Style Hand Operated Valves The Mark 75HW is a manually operated, sliding gate control valve. The wafer style body provides great value for the end user while offering all of the
Mark 80. Self-Operated Temperature Regulators. Temperature Regulators Mark 80 Self-Operated Temperature Regulators FEATURES
Mark 80 Self-Operated Temperature Regulators The MK80 Series is completely self-operated and requires no external power source or other expensive instrumentation to operate the valve. The operation of
Series 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
Single Seated Globe Control Valves
Product 1: Top Guided Single Seated Control Valves Type: Globe Size: 1-1/2'', 2'', 2-1/2'', 3'', 4'', 6''and 8 (DN40 DN200) Pressure Rating: ANSI 125 ~ ANSI 600 (PN16~PN64, JIS10K~JIS40K) Body Material:
Honeywell EN REV. 2 09/2014 Page 1 of 10 Specification
Series 9110 Single/Double Seated Globe Valves for ANSI 150-600 DIN/BS 4504 PN10-PN40 Honeywell 70-16-10-05 EN REV. 2 09/2014 Page 1 of 10 Specification Series 9110 Single/Double Seated Globe Valves for
41005 Series Control Valves. Specification Data CH /10
Putting You In Control Specification ata CH41005 11/10 41005 Series Control Valves Complete Line of Heavy uty, Balanced, Cage Guided, Globe Valves with Lo-dB Anti-Cavitation Capabilities resser Masoneilan
Mark 50 Series. Back Pressure Regulators Mark 50 Self-Operated Back Pressure Regulators. Self-Operated Back Pressure Regulators.
Mark 50 Series Self-Operated Back Pressure Regulators The Mark 50 Sliding Gate Back Pressure Regulator is used to regulate upstream pressure at a predetermined setpoint. The spring in the Mark 50 holds
Mark 89/89MX Series. Temperature Regulators Mark 89/89MX Three-Way Temperature Regulators. Three-Way Temperature Regulators.
Mark 89/89MX Series Three-Way Temperature Regulators The Mark 89 is used for diverting service and is ideal for bypassing fluids around coolers or filters. In this configuration, there is one inlet and
21000 Series Control Valves
GE Oil & Gas Technical Specifications 09/2012 Masoneilan * Valves 21000 Series Control Valves Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB * & Anti-Cavitation Capabilities Table of Contents
Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 462 Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 461.16-E Available designs 40 18 Cap H2 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring
Masoneilan* 215X1 Series Control Valve
GE Oil & Gas Technical Specifications 05/2013 Masoneilan* 215X1 Series Control Valve UOP Lock Hopper Over Travel Control Valves Table of Contents Features...3 General Data...4 Numbering System...5 Temperature
Type MR108 Direct-Operated Backpressure Regulators
July 2016 Type MR108 Direct-Operated Backpressure Regulators P1202_1 P1203_1 Type mr108 with low-pressure Actuator Type mr108 with high-pressure actuator Figure 1. Type MR108 Direct-Operated Backpressure
Baumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves
24000CVF and 24000SVF Valves Product Bulletin Baumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves The Baumann 24000CVF and 24000SVF line of control valves can be utilized for the
Fisher YD and YS Control Valves
YD and YS Valves Product Bulletin Fisher YD and YS Control Valves Fisher YD and YS three-way cage-guided valves are designed for throttling or flow-switching (on-off) service, and are available in the
21000 Series. Masoneilan* Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB* and Anti-Cavitation Capabilities
GE Oil & Gas Technical Specifications 02/2016 Masoneilan* 21000 Series Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB* and Anti-Cavitation Capabilities Table of Contents Numbering System...3
Fisher GX Control Valve and Actuator System
Product Bulletin D103171X012 GX Control Valve and Actuator Fisher GX Control Valve and Actuator System The Fisher GX is a compact, state-of-the-art control valve and actuator system, designed to control
T205 Series Tank Blanketing Regulators
T205 Series Tank Blanketing Regulators Bulletin 74.1:T205 September 2013 Figure 1. Type T205 Tank Blanketing Regulator Contents Features...1 Introduction...2 Specifi cations...2 Principle of Operation...2
Mark 78 Series. Control Valves Mark 78 Globe Style Control Valves. Globe Style Control Valve. Function. Features. CRN Registration Number Available
Mark 78 Series Globe Style Control Valve The Mark 78 pneumatic control valve is designed for accurate performance and simplified maintenance. This versatile product can be used on a variety of applications,
Series 240 Type 3351 Pneumatic On/off Valve
Series 240 Type 3351 Pneumatic On/off Valve Application Shut-off valve with tight shut-off for liquids, gases and vapors according to DIN or ANSI standards Valve size DN 15 to 100 NPS ½ to 4 Pressure rating
Baumann Corrosion Resistant Control Valve
Product Bulletin D103337X012 Baumann 26000 Corrosion Resistant Control Valve The Baumann 26000 (figures 1 and 2) is a unique corrosion resistant control valve featuring a flangeless wafer valve body and
O-Rings & Circlips Catalogue
O-Rings & Circlips Catalogue 1 2 Contents O-Rings Table of Groove Dimensions for Dynamic & Static Sealing... 4 Resistance Properties of Various Elastomers... 5 Temperature Requirements... 6 Imperial: Guide
BOSS Series D Control Valve
Applications Process control systems for food, pulp and paper, chemical, petrochemical & other industries HVAC systems Feed water and fuel system controls in boiler rooms Packaged systems (OEM) such as
Mark 70 Series. Sliding Gate Control Valves. Pneumatic Control Valves Mark 70 Sliding Gate Control Valves MARK 70 FEATURES
Mark 7 Series Sliding Gate Control Valves The MK7 Series is a line of pneumatically-operated diaphragm control valves that combine multiple spring actuators with the precision of Jordan Valve s advanced
Model 380/381 Control Valves
Features High Quality Construction Dyna-Flo uses only materials that have been proven to provide superior, trouble free performance. All materials comply with ASME and ASTM specifications. Versatility
UNIWORLD series PNEUMATIC VALVES
UNIWORLD series PNEUMATIC VALVES 5100AD/E 07 2013 SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME
T205 Series Tank Blanketing Regulators
Bulletin 74.1 D103747X012 T205 Series June 2018 T205 Series Tank Blanketing Regulators Figure 1. Type T205 Tank Blanketing Regulator Contents Features... 1 Introduction.... 1 Specifications... 2 Principle
Fisher GX Control Valve and Actuator System
GX Control Valve and Actuator Product Bulletin Fisher GX Control Valve and Actuator System The Fisher GX is a compact, state-of-the-art control valve and actuator system, designed to control a wide range
Baumann 24000S Stainless Steel Control Valve
24000S Valve Product Bulletin Baumann 24000S Stainless Steel Control Valve The Baumann 24000S versatile, pneumatic, control valve may be used for the control of pressure, temperature, level, and flow.
Mark 33 Series. Control Valves Mark 33/39 Electric Motor Control Valves. Electric Motor Control Valves. Features. CRN Registration Number Available
Mark 33 Series Electric Motor Control Valves The Mark 33 is a motor operated valve featuring the Jordan sliding gate seat and heavy-duty industrial motors for proportional (resistance), on-off, 4-20mA
Fisher CAV4 Control Valve
Fisher CAV4 Control Valve CAV4 (globe) CAV4 (NPS 2) CAV4 (angle) CAV4 (NPS 2 through 6) CAV4 Series Valves The Fisher CAV4 control valve with Cavitrol IV trim is designed specifically for liquid applications,
VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1
SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators
KOSO HAMMEL DAHL. Specifications. Body Size: Globe - 1/2" through 6" ( mm). Angle - 1/2" through 2" (15-50 mm).
control valves KOSO HAMMEL DAHL B U L L E T I N G 1 3 0-1 FEATURES Cage-retained quick change seat ring simplifies maintenance. Metal seats for a variety of services and ANSI IV and V shutoff. Soft seat
Control valves with pneumatic actuators up to 350 C PN
300 540 1080 2 Features Suitable in building and process engineering for various mediums 0...+200 C Suitable with stuffing box extension or stem seal with stainless steel bellow to 10...+350 C and for
Fisherr GX Control Valve and Actuator System
Product Bulletin D103171X012 GX Control Valve and Actuator Fisherr GX Control Valve and Actuator System The Fisher GX is a compact, state-of-the-art control valve and actuator system, designed to control
Item Component Remarks Type 4393 Type ), SA Vulcanized soft seal disc SA L SA L
Available designs materials Materials Item Component Remarks 3 4 1 Base / Inlet body 2 Outlet body Threaded connection Flange connection 2.1 Outlet adaptor Flange connection 2.4 Outlet flange Flange connection
GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE
GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE 1-6940 Cryo valves are especially designed for cryogenic service. The construction is the same of 1-6941 and 1-6943 standard globe valves with the exception of
VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
Balanced and Multi-stage Trim Options for SPIRA-TROL Two-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Control Valves & Regulators
Control Valves & Regulators Sliding Gate Valves Pressure Regulators Temperature Regulators Control Valves Positioners Jordan Valve sliding gate regulators and control valves are excellent choices for many
Balanced and Multi-stage Trim Options for SPIRA-TROL Two-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Balanced and Multi-stage Trim Options for Spira-trol TM Two-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Self-operated Pressure Regulators Type Universal Pressure Reducing Valve
Self-operated Pressure Regulators Type 41-23 Universal Pressure Reducing Valve ANSI version Application Pressure regulators for set points from 0.75 to 400 psi (0.05 to 28 bar) Valves in NPS ½ to 4 (DN
Fisher CV500 Rotary Control Valve
Product Bulletin D101606012 Fisher CV500 Rotary Control Valve CV500 Valve The Fisher CV500 Cam Vee Ball control valve combines the rangeability of the cammed-segmented V-notched ball, with the inherent
Fisher GX 3-Way Control Valve and Actuator System
GX 3-Way Valve and Actuator Product Bulletin Fisher GX 3-Way Control Valve and Actuator System The Fisher GX 3-Way is a compact, state-of-the-art control valve and actuator system, designed to accurately
Fisher CV500 Rotary Globe Control Valve
CV500 Valve D101606012 Product Bulletin Fisher CV500 Rotary Globe Control Valve The Fisher CV500 Cam Vee-Ball control valve combines the rangeability of the cammed-segmented V-notched ball, with the inherent
Mark 60 Series. Pressure Regulators Mark 60 Pressure Regulators. Self Operated Pressure Regulators. CRN Registration Number Available
Mark 60 Series Self Operated Pressure Regulators The Mark 60 Sliding Gate Pressure Regulator is used to regulate the downstream pressure to a predetermined setpoint. The spring in the Mark 60 holds the
Type Pneumatic Control Valve Type 3525 Globe Valve
Type 355-1 Pneumatic Control Valve Type 355 Globe Valve Application Dump valve designed for use in high-pressure on/off applications in upstream oil and gas production. Valve size NPS 1 to 3 Pressure rating
JSRHF Series. Sanitary Valves JSRHF Series High Flow Pressure Reducing Valves. High Flow Bioprocess Clean Gas Pressure Reducing Valves
JSRHF Series High Flow Bioprocess Clean Gas Pressure Reducing Valves The JSRHF Series high purity gas pressure regulator was designed and built specifically for Bio-Pharma gas applications. Traditionally,
570, 571, 573 Control Valves
Features Valve Sizes and Connections The 2, 3, 4, 6, and 8 flangeless valves will mate ANSI, 300, and 600 raised face flanges. The 2, 3 4, 6, 8, 10, and 12 RF flanged 571 and 573 will mate with ASME (571)
Type MR108 Direct-Operated Backpressure Regulators
August 2013 Type MR108 Direct-Operated Backpressure Regulators P1202 P1203 TYPE MR108 WITH LOW- ACTUATOR TYPE MR108 WITH HIGH- ACTUATOR Figure 1. Type MR108 Direct-Operated Backpressure Regulators Contents
SERIES GU CONTROL VALVES GLOBE-SINGLE SEATED, TOP GUIDED
SERIES GU CONTROL VALVES GLOBE-SINGLE SEATED, TOP GUIDED Metso's Neles series GU single seated, top guided globe valves are economical high-performance control valves designed to provide the best possible
Series A angle pattern control valves
Series A angle pattern control valves AU: Angle pattern-unbalanced top guided AB: Angle pattern-balanced cage guided AM: Angle pattern-omega multi-path & multi-stage Metso's Neles A series angle pattern
Compact. performance. Threaded Safety Relief Valves. Series 437 Type Series 459 Type CATALOG.
Compact performance Threaded Safety Relief Valves Series 437 Type 437 438 439 Series 459 Type 459 46 CATALOG The Safety Valve Series 459 Packed lever H4 Series 459 Balanced bellows design Series 459 Cap
35002 Series Camflex * II Rotary Control Valves
GE Oil & Gas Technical Specifications 09/2012 Masoneilan * Valves 35002 Series Camflex * II Rotary Control Valves The 35002 Series Camflex II Eccentric Plug Rotary Control Valve features an extension bonnet,
Mark 5108 Series. Back Pressure Regulating Valves Mark 5108 Series. Back Pressure Regulating Valves. Valve Features. Operation
Mark 5108 Series Back Pressure Regulating Valves In many liquid piping systems, it is vital that line pressure is maintained within relatively narrow limits. The Mark 5108 is designed to do just that.
Control Valves for General Applications
Control Valves for General Applications 2 CCI s 8G/8H delivers superior control performance and reliability. The series 8 cage-guided valve is specially designed using recent advancements in control valve
UNI-DIRECTIONAL KNIFE GATE VALVE
UNI-DIRECTIONAL KNIFE GATE VALVE The MU-CYL model knife gate is a Uni-directional valve, equipped with automatic or manual driver, that by its loose elastomeric clamping ring design (tight version) ensures
JSRHF Series. Sanitary Valves JSRHF Series High Flow Pressure Reducing Valves. High Flow Bioprocess Clean Gas Pressure Reducing Valves
JSRHF Series High Flow Bioprocess Clean Gas Pressure Reducing Valves The JSRHF Series high purity gas pressure regulator was designed and built specifically for Bio-Pharma gas applications. Traditionally,
JSBLF Series Compact, High Purity Low Flow Back Pressure Regulating Valve
JSBLF Series Compact, High Purity Low Flow Back Pressure Regulating Valve The JSBLF is a fully drainable compact back pressure regulator designed and built specifically for hygienic, ASME BPE low flow
Design ET, EAT, and ETR Sliding-Stem Control Valves
Product Bulletin Design ET, EAT, and ETR Sliding-Stem Control Valves ET Valve Design ET, EAT, and ETR general-purpose control valves (figures 1,,, and ) are used for throttling or on-off control of a wide
Fisher CAV4 Control Valve
CAV Valve Product Bulletin Fisher CAV Control Valve The Fisher CAV control valve with Cavitrol IV trim is designed specifically for liquid applications, such as boiler feedwater recirculation, where pressure
Fisher 8532 High-Performance Butterfly Valve
8532 Valve Product Bulletin Fisher 8532 High-Performance Butterfly Valve The Fisher 8532 high-performance butterfly valve provides outstanding performance under extreme pressure and temperature conditions.
Mark 53/54 Series. Pressure Regulators Mark 53 Differential Back Pressure Regulators. Differential Back Pressure Regulators.
Mark 53/54 Series ifferential Back Pressure Regulators The Jordan Mark 53 maintains a constant differential between the inlet pressure and the pressure loaded on top of the diaphragm. It can be used for
Series 2000 Top Guided Control Valve
Series 2000 Top Guided Control Valve Series 2000 Control Valve Series 2000 process Control Valves. Sturdy design with special service trims available for: Cavitation Control Noise Reduction Top entry construction
Fisher HP Series Control Valves
Product Bulletin D0635X0 Fisher HP Series Control s HP (Globe ) HPA (Angle ) Balanced High-Temperature Trim Balanced Tight Shutoff Trim Unbalanced Trim Fisher HP Series control valves (figure ) are single-port,
Baumann 24000C Carbon Steel Little Scotty Control Valve Instructions
Instruction Manual D103356X012 24000C Control Valve Baumann 24000C Carbon Steel Little Scotty Control Valve Instructions CONTENTS Introduction...1 Scope...1 Safety Precautions...1 Maintenance...2 Flow
SPIRA-TROL 1/2" to 4" ANSI Two-port KEA, KFA and KLA Control Valves
1/2" to 4" ANSI Two-port KEA, KFA and KLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
The GACHOT V501 gate valve offer the most possible reliability for process and critical applications
The GACHOT V501 gate valve offer the most possible reliability for process and critical applications Features Construction complies with NF EN 1984 Straight-through flow and full port Cast body (investment
HD150/HD300 Heavy Duty Knife Gate Valve
Fabri-Valve HD150/HD300 Heavy Duty Knife Gate Valve HEAVY DUTY VALVES FOR THE OIL SANDS INDUSTRY Heavy Duty Knife Gate Valve The HD150 and HD300 Heavy Duty Knife Gate Valve The Fabri-Valve HD line of Heavy
Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure
Series Thermal Relief Safety Valves Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure Applications The Sempell series provides a complete and comprehensive range
Model DF233 Control Valves
Features NACE Service Ready Standard construction for the DF2 control valve features NACE trim. The valve bonnet and body also conform to NACE MR075 (National Association of Corrosion Engineers) recommendations.
Fisher CAV4 Control Valve
Product Bulletin D10197X012 Fisher CAV Control Valve CAV Valve The Fisher CAV control valve (figure 1) with Cavitrol IV trim is designed specifically for liquid applications, such as boiler feedwater recirculation,
DBOY Series Pneumatic Control Valve
Applications Process control systems for food, pulp and paper, chemical, petrochemical & other industries HVAC systems Feed water and fuel system controls in boiler rooms Packaged systems (OEM) such as
Mark 37/377 Series. Control Valves Mark 37/377 Final Control Element. Final Control Element. Features
Mark 37/377 Series Final Control Element The Mark 37 is a motor-operated control valve that combines a state-of-the-art electronic linear actuator with the exceptional performance of Jordan s sliding gate
JSRLP Series Low Pressure Reducing Valves for Bio-Pharm Gas Applications
JSRLP Series Low Pressure Reducing Valves for Bio-Pharm Gas Applications JSRLP is a high purity gas low pressure regulator designed and built specifically for hygienic, ASME BPE gas applications. The JSRLP
Fisher V500 Rotary Control Valve
Product Bulletin D100054012 Fisher V500 Rotary Control Valve V500 Valve The Fisher V500 eccentric plug rotary control valve controls erosive, coking, and other hard-to-handle fluids, providing either throttling
SPIRA-TROL 1/2" to 4" ANSI Two-port LEA, LFA and LLA Control Valves
1/2" to 4" ANSI Two-port LEA, LFA and LLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
HELYON PRESSURE REDUCING VALVE MODEL M1
PRESSURE REDUCING VALVE MODEL - 5 Chemin du Jubin 69570 DARDILLY MAIN CHARACTERISTICS The model is self-operated bellows sealed pressure reducing valve. This series of regulators is suitable for steam,
The Right Seal for Every Application
The Right Seal for Every Application O-Rings The O-ring s simple & inexpensive design remains a popular and universal choice for sealing static and dynamic hydraulic systems. It seals efficiently in both
Type 441 CATALOG. Flanged Safety Relief Valves. The-Safety-Valve.com
Type 441 Flanged Safety Relief Valves CATALOG The-Safety-Valve.com General Information LESER India Safety Relief Valves The safety valve Type 441 represents High capacity related to the safety valve size
Model DF233 Control Valves
Features NACE Service Ready Standard construction for the DF233 control valve features NACE trim. The valve bonnet and body also conform to NACE MR075 (National Association of Corrosion Engineers) recommendations.
Fabricated Bevel Gear Operator Bi-Directional Metal Seat 150 PSI Bi-Directional Resilient Seat 150 PSI
Knife Gate Valves Uni-Directional (Metal Seated) Manual Handwheel Style KGV...2 Carbon Steel Technical Data 150 PSI 2 24...3 304 Stainless Steel Technical Data 150 PSI 2 24...3 316 Stainless Steel Technical