Mark 89/89MX Series. Temperature Regulators Mark 89/89MX Three-Way Temperature Regulators. Three-Way Temperature Regulators.
|
|
|
- Oscar O’Neal’
- 5 years ago
- Views:
Transcription
1 Mark 89/89MX Series Three-Way Temperature Regulators The Mark 89 is used for diverting service and is ideal for bypassing fluids around coolers or filters. In this configuration, there is one inlet and two outlets. As one inlet closes, the other outlet opens, diverting flow from one channel to the other. The Mark 89MX is used as a combining or mixing valve with two inlets and one outlet. When used as a mixing valve, optimal performance will be achieved with equal pressures on both inlets. Features The Mark 89/89MX is a self-operated temperature regulating valve that features a three-way body for use on diverting service as a bypass valve (Mark 89) or for combining fluids as a mixing valve (Mark 89MX). Completely self-operated no external power source required. Totally enclosed, heliarc welded stainless steel actuator for long service life no gaskets or bellows to wear out. Thermal system with capillaries up to 100 feet (30 meters) in length are easily replaced in the field for quick range changes. Sliding gate seats provide Straight-through flow for reduced turbulence and quiet operation Short stroke for fast response and accurate temperature control Easily interchangeable Cv s Tight shutoff Jordan Valve, a division of Richards Industries 3170 Wasson Road Cincinnati, OH (f) info@richardsind.com Temperature Regulators Mark 89/89MX Three-Way Temperature Regulators
2 Specifications Line s: 1-1/2" (DN40) & 2" (DN50) End Connections: NPT, BSPT, BSPP, Flanged Body Materials: Carbon Steel (WCB) Stainless Steel (CF8M) Trim Materials: 303 SS 316SS Seat Materials: Jorcote on Standard Other materials available Consult factory Thermal System: Actuator Type: Standard Capillary: 8' long Copper Standard Armor: Sensing Bulb: Copper (standard); (optional) Other Lengths and Materials available upon request Temperature Gauge: mounted on actuator as an option Thermal Wells (optional): Type A (standard): to fit bulb with 1" NPT trank fitting: Type B Flanged: to fit bulb with 1-1/2" (DN40) or 2" (DN50) x 150# or 300# flange. Flow Paths: Yoke Material: Carbon Iron Actuator: 304SS Stem Packing Materials: Spring-loaded Teflon (to 450 F max/232 C max) Grafoil (above 500 F/260 C) OUTLET OPEN) MARK 89 INLET OUTLET CLOSED) Service: steam, water, oil, gas, air and chemicals Shutoff: ANSI Class IV Body Rating: up to 1000 psi (69 bar) and 650 F (343,3 C) depending on specific construction. -20 F (-28,9 C) temperature limit on all materials; for other temperatures, contact Jordan Valve. INLET OPEN) MARK 89MX OUTLET INLET CLOSED) Cv Flow Coefficients & Maximum Differential Pressures Flow Maximum P Coefficient Seat Sat. Steam, Liquid Air Material Inches DN Cv Kv PSI BAR 15 12,9 Standard 40 2,8 1-1/2" 40 & 25 21,5 & 2" ,8 Jorcote 70 4,8 Note: Low flow trim available, consult factory for values. -2-
3 Specifications Available Temperature Control Ranges & Spans Range ºF (ºC) -20 to 20 * (-29 to -7) 10 to 55 (-12 to 13) 35 to 90 (2 to 32) 55 to 115 (13 to to 140 (27 to 60) 110 to 165 (43 to 74) 120 to 185 (49 to 85) 160 to 225 (71 to 107) 205 to 260 (96 to 127) 230 to 290 (110 to 143) 265 to 325 (129 to 163) 315 to 400 (157 to 204) 380 to 450 (193 to 232) Thermal Fill * Required reinforced actuator Temperature Span from closed to open ºF (ºC) with standard spring Freon (9) Freon R134A 17 (9) Iso Butane 18 (10) N-Butane 18 (10) Ethyl Chloride 18 (10) Freon R (14) Ethyl Ether 26 (14) Acetone 26 (14) Isopropyl Alcohol 17 (9) N-Propyl Alcohol 18 (10) N-Butyl Alcohol 18 (10) M-Xylene 21 (12) P-Cymene 21 (12) Maximum Working Pressure & Temperature Maximum 100ºF, PSI (37,8ºC, BAR) Packing CS Body Body 150# 300# TE 150# 300# TE All 285 (19,6) 740 (51,0) 1000 (68,9) 275 (19,0) 720 (49,6) 1000 (68,9) Maximum Temperature, PSI/ºF (BAR/ºC) TEF 170/ / / / / /500 (11,7/260) (41,4/260) (68,9/260) (11,7/260) (33,1/260) (65,8/260) GRAF 125/ / / / / /650 (8,6/343) (36,9/343) (68,9/343) (8,6/343) (30,7/343) (61,4/343) -3-
4 Dimensions Valve Dimensions Threaded Ends: MK89 & 89MX Dimensions (inches) A B C D (lbs.) 1-1/2" " " (114mm) D Threaded Ends: MK89 & 89MX, DIN (DN) Dimensions (mm) A B C D (kg) B Flanged Ends: MK89 & 89MX 1-1/2" 2" ANSI Flange Dimensions (inches) A1 B C1 D (lbs.) 150# # # # C1 C Flanged Ends: MK89 & 89MX, DIN (DN) Flange (PN) Dimensions (mm) A1 B C1 D (kg) 10/ / / / A A1 Bulb Dimensions Bulb Type A & B C D-E-F Nom. Bulb (diameter x length)* for ranges beginning 101ºF (38,3ºC) or above 100ºF (37,8ºC) or below (25,4mm x 304,8mm) ( only) 25,4mm x 304,8mm) 1-1/8" x 14" (Copper only) (28,6mm x 355,6mm) (25,4mm x 304,8mm) (25,4mm x 355,6mm) (25,4mm x 355,6mm) 1-1/8" x 14" (Copper only) (28,6mm x 355,6mm) (25,4mm x 355,6mm) Consult factory for insertion length and special bulb lengths. -4-
5 Ordering Schematic / Model 89 Three-Way Temperature Regulator 89T with Temperature Gage 89MX Three-Way Mixing Valve 89MXT with Temperature Gage 2 Inches DN /2" DN " DN50 3 Body Material CS Carbon Steel (WCB) S6 Stainless Steel (CF8M) 4 End Connections PT NPT BP BSPT BP BSPP SW FSW F5 150# FE (except IFE) F3 300# FE (except IFE) 5 Trim T3 303 SS T6 316 SS 6 Seats Material Cv Kv A ,9 B 316 A 25 21,5 V 303SS/Jorcote B 30 25,8 W 316SS/Jorcote 7 8 Range Standard Spring ºF Standard Spring ºC * -29 7* Light Spring ºF Light Spring ºC * Required reinforced actuator Thermowell for Bulb Type, Fitting & Material Diameter x Length A B E F G H Type A, 1" NPT Cu Type A, 1" NPT, 1-1/2" x 150#, 1-1/2" x 300#, 2" x 150#, 2" x 300#, A B Tank Fitting Only 11 1" NPT Brass for 1" Bulb 12 1" NPT for 1" Bulb NN None (24,5mm x 304,8mm) (24,5mm x 355,6mm) -5-
6 MK89/0517 Ordering Schematic (Cont'd) 9 Thermowell System Bulb Refer to the standard bulb dimensions chart for metrics Cap/Arm ft (m) Actuator 9 Thermowell System Bulb Refer to the standard bulb dimensions chart for metrics Cap/Arm ft (m) Actuator N1N1Q H2B1R N2N1Q A1A2A 10 (3,1) A2A2A 10 (3,1) H2B2R 10 (3,1) H2B3R Type B H2B4R 15 (4,6) Reinforced A1A3A A2A3A Copper Type A A1A4A 15 (4,6) A2A4A 15 (4,6) H2B5R 20 (6,1) J3T1A TFE J3T4A J3T5A 1" x 17" Coated Type B 10 (3,1) A1A5A 20 (6,1) C9A1A A2A5A 20 (6,1) A2A1R A2A2R 10 (3,1) A2A3R Copper Type A A2A4R 15 (4,6) Reinforced C9A2A 10 (3,1) C9A3A 1-1/8" x Copper 14" Type C C9A4A 15 (4,6) C9A5A 20 (6,1) C1B1A A2A5R 20 (6,1) Q1N1Q Q2N1Q C1B2A 10 (3,1) C1B3A Type C C1B4A 15 (4,6) G1B2A 10 (3,1) C1B5A 20 (6,1) G2B2A 10 (3,1) C2B1A G1B3A G2B3A Type A G1B4A 15 (4,6) C2B2A 10 (3,1) C2B3A Type C C2B4A 15 (4,6) G2B4A 15 (4,6) C2B5A 20 (6,1) G1B5A 20 (6,1) G2B5A 20 (6,1) G2B1R G2B2R 10 (3,1) G2B3R Type A G2B4R 15 (4,6) Reinforced G2B5R 20 (6,1) H1B1A H2B1A H1B2A 10 (3,1) H2B2A 10 (3,1) H1B3A H2B3A Type B H1B4A 15 (4,6) H2B4A 15 (4,6) H1B5A 20 (6,1) H2B5A 20 (6,1) Jordan Valve, a division of Richards Industries 3170 Wasson Road Cincinnati, OH (f) info@richardsind.com
Mark 80. Self-Operated Temperature Regulators. Temperature Regulators Mark 80 Self-Operated Temperature Regulators FEATURES
Mark 80 Self-Operated Temperature Regulators The MK80 Series is completely self-operated and requires no external power source or other expensive instrumentation to operate the valve. The operation of
Mark 33 Series. Control Valves Mark 33/39 Electric Motor Control Valves. Electric Motor Control Valves. Features. CRN Registration Number Available
Mark 33 Series Electric Motor Control Valves The Mark 33 is a motor operated valve featuring the Jordan sliding gate seat and heavy-duty industrial motors for proportional (resistance), on-off, 4-20mA
Mark 79/79MX Series JORDANVALYE. Three-Way Control Valves
Mark 79/79MX Series Three-Way Control Valves The Mark 79 is a pneumatic 3-way control valve for use in either bypass or mixing service. The MK79 utilizes the unique sliding gate trim design to provide
Pneumatic Control Valves Mark 70 Sliding Gate Control Valves. Sliding Gate Control Valves. 3L/T-2R/S33 Series Mark 70 Series.
3L/T-2R/S33 Series Mark 7 Series Sliding Gate Control Valves The Mark 7 Series is a line of pneumatically-operated diaphragm control valves that combine multiple spring actuators with the precision of
Pneumatic Control Valves Mark 70 Sliding Gate Control Valves. Sliding Gate Control Valves. 3L/T-2R/S33 Series Mark 70 Series.
3L/T-2R/S33 Series Mark 7 Series Sliding Gate Control Valves The Mark 7 Series is a line of pneumatically-operated diaphragm control valves that combine multiple spring actuators with the precision of
Mark 63/64 Series. Pressure Regulators Mark 63/64 Differential Pressure Regulators. Differential Pressure Regulators. Features
Mark 63/64 Series Differential Pressure Regulators The Jordan Mark 63 is designed to maintain a constant differential between the pressure on the discharge side of the regulator and the signal pressure
Mark 37/377 Series. Control Valves Mark 37/377 Final Control Element. Final Control Element. Features
Mark 37/377 Series Final Control Element The Mark 37 is a motor-operated control valve that combines a state-of-the-art electronic linear actuator with the exceptional performance of Jordan s sliding gate
Mark 70 Series. Sliding Gate Control Valves. Pneumatic Control Valves Mark 70 Sliding Gate Control Valves MARK 70 FEATURES
Mark 7 Series Sliding Gate Control Valves The MK7 Series is a line of pneumatically-operated diaphragm control valves that combine multiple spring actuators with the precision of Jordan Valve s advanced
Mark 608 Series. Pressure Regulators Mark 608 Gas Pressure Regulators. Gas Pressure Regulators. Specifications. CRN Registration Number Available
Mark 608 Series Gas Pressure Regulators The 1-1/2" and 2" size Mark 608 valves are for use on large tank blanketing applications or other low pressure gas regulation. In a tank blanketing application,
Mark 50 Series. Back Pressure Regulators Mark 50 Self-Operated Back Pressure Regulators. Self-Operated Back Pressure Regulators.
Mark 50 Series Self-Operated Back Pressure Regulators The Mark 50 Sliding Gate Back Pressure Regulator is used to regulate upstream pressure at a predetermined setpoint. The spring in the Mark 50 holds
Mark 78 Series. Control Valves Mark 78 Globe Style Control Valves. Globe Style Control Valve. Function. Features. CRN Registration Number Available
Mark 78 Series Globe Style Control Valve The Mark 78 pneumatic control valve is designed for accurate performance and simplified maintenance. This versatile product can be used on a variety of applications,
Mark 608BP Series. Pressure Regulators Mark 608BP Gas Pressure Regulators. Balanced Plug Gas Pressure Regulators. Features
Mark 608BP Series Balanced Plug Gas Pressure Regulators The Mark 608BP Balanced Plug Gas Pressure Regulator is the ideal valve for low pressure gas regulation with higher inlet pressures. The selfcontained
Mark 675 Series. Pressure Regulators Mark 675 Pressure Regulators. Self-Operated Pressure Regulators. Mark 675 Features
Mark 675 Series Self-Operated Pressure Regulators The Mark 675 Wafer Style Sliding Gate Pressure Regulator is used to regulate the downstream pressure to a predetermined setpoint. The spring in the Mark
Mark 60 Series. Pressure Regulators Mark 60 Pressure Regulators. Self Operated Pressure Regulators. CRN Registration Number Available
Mark 60 Series Self Operated Pressure Regulators The Mark 60 Sliding Gate Pressure Regulator is used to regulate the downstream pressure to a predetermined setpoint. The spring in the Mark 60 holds the
Mark 53/54 Series. Pressure Regulators Mark 53 Differential Back Pressure Regulators. Differential Back Pressure Regulators.
Mark 53/54 Series ifferential Back Pressure Regulators The Jordan Mark 53 maintains a constant differential between the inlet pressure and the pressure loaded on top of the diaphragm. It can be used for
Mark 75HW Series. Hand Operated Valves Mark 75 Pneumatic Control Valves. Wafer Style Hand Operated Valves. Size and Price Advantage
Mark 75HW Series Wafer Style Hand Operated Valves The Mark 75HW is a manually operated, sliding gate control valve. The wafer style body provides great value for the end user while offering all of the
V1C Series. Pneumatic Control Valves V1C Series Cage-Guided Control Valves. Cage-Guided Control Valve. Features
V1C Series Cage-Guided Control Valve The V1C cage-guided balanced trim control valve offers high pressures and tight shutoff with the use of standard spring/diaphragm actuators. The balanced cage trim
Mark 75 Series. Control Valves Mark 75 Pneumatic Control Valves. Wafer Style Control Valves. Pricing Advantage. Weight Advantage
Mark 75 Series Wafer Style Control Valves The Mark 75 wafer style control valve was developed by Jordan Valve as the next generation of control valves. Featuring all the benefits of the time-tested Sliding
708MV Series Motor Valve
708MV Series Motor Valve FRACTIONAL FLOW CONTROL S CRN Registration Number Available The Mark 708MV offers several advantages including extreme accuracy, high turndown ratios and repeatability. The features
Control Valves & Regulators
Control Valves & Regulators Sliding Gate Valves Pressure Regulators Temperature Regulators Control Valves Positioners Jordan Valve sliding gate regulators and control valves are excellent choices for many
708 Series. Fractional Flow Control Valves FRACTIONAL FLOW CONTROL VALVES. CRN Registration Number Available
708 Series Fractional Flow Control Valves FRACTIONAL FLOW CONTROL S CRN Registration Number Available The Mark 708 was developed by Jordan Valve to provide the most accurate control available for fractional
Jordan Control Valve Series
Jordan Control Valve Series JCVS Globe Style Control Valves Mark ED and ET Globe Style Control Valves The Mark ED and ET are single port, globe style bodies with composition or metal seats, and a balanced
TEMPERATURE REGULATORS W91/W94 Series
Self-Operated Temperature Regulators Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel Company Self-Operating Design Indicating
Mark 695 Series. Pressure Regulators Mark 695 Piloted Tank Blanketing Regulators. Piloted Tank Blanketing Regulator 3/4"- 1" Optional Features
Mark 695 Series Piloted Tank Blanketing Regulator 3/4"- 1" The Mark 695 Series piloted soft seat regulator was designed specifically to provide accurate pressure control on very low pressure tank blanketing
High Capacity Direct Operated Pressure Reducing Valve. Features
MK608UBAN Series High Capacity Direct Operated Pressure Reducing Valve The MK608UBAN series are spring loaded, direct-operated, pressure reducing regulators. Their main function is to regulate the outlet
MK608MM Series. Pressure Regulators Mark 608MM Self-Operated Pressure Regulator. Self-Operated Pressure Reducing Valve. Features
MK608MM Series Self-Operated Pressure Reducing Valve The MK608MM series is a spring loaded, self actuated, direct-operated valve. They are available in 1 up to 10 inches (DN25 through DN250) body sizes.
W91/W94 Series TEMPERATURE REGULATORS. Self-Operated Temperature Regulators. Design & Operation W91 Non-Indicating W94 Dial Thermometer
Design & Operation W91 Non-Indicating W94 Dial Thermometer Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel Company CAPILLARY
MK508MM Series. Back Pressure Regulators Mark 508MM Self-Operated Back Pressure Regulators. Self-Operated Back Pressure Regulators.
MK508MM Series Self-Operated Back Pressure Regulators The MK508MM series are spring loaded, self actuated, direct-operated valves. The Mark 508MM Back Pressure Regulating Valves regulate upstream pressure
3L/T-2P/Q33 Series 3 Way Ball Valves
3L/T-P/Q33 Series 3 Way Ball Valves A multi-port valve that will lower overall costs by allowing the replacement of two or three conventional straight-line valves, eliminating excess fittings and simplifying
Series 2003 / Three-way control valve. Features. Wörth am Main
Series 2003 / 2013 Three-way control valve SPECIFICATION The Series 2003 / 2013 comprises a range of skirt guided Three-way mixing (2003) and diverting valves (2013). Available in a variety of sizes, they
Self-Operating Temperature Regulators
Self-Operating Temperature Regulators Remote Bulb for Heating, Cooling, Mixing and By-Pass Applications Powers # Regulators With Powers # Self-Operating Temperature Regulators, you no longer need external
MK508UBS Series. Back Pressure Regulator MK508UBS. Threaded or Flanged Connections Carbon Steel, Stainless Steel & Alloy Construction.
MK508UBS Series Threaded or Flanged Connections Carbon Steel, Stainless Steel & Alloy Construction The MK508UBS Series are spring loaded, direct-operated, pressure relief valves used downstream of pressure
SVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D
Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98
Marwin Valve 4700 Series 2000 WOG Three Piece Ball Valves
4700 Series 2000 WO Three Piece Ball Valves Fire Tested API 607 4 th ed. APPROVEDDD The new Marwin 4700 Series represents the leading technology in three piece ball valves. This versatile 2000 WO rated
Mark 5108 Series. Back Pressure Regulating Valves Mark 5108 Series. Back Pressure Regulating Valves. Valve Features. Operation
Mark 5108 Series Back Pressure Regulating Valves In many liquid piping systems, it is vital that line pressure is maintained within relatively narrow limits. The Mark 5108 is designed to do just that.
Temperature Regulators
Temperature Regulators DESIGN & OPERATION DIAL THERMOMETER (Model 91400 only) BELLOWS OVERRANGE PROTECTION SPRING CAPILLARY TUBING CONNECTION SENSING BULB RANGE ADJUSTMENT SPRING CAP ADJUSTMENT SCREW BUSHING
3-Way Brass Ball Valves L or T Port Design, 400 PSI WOG 1/4 to 3 NPT
3-Way Brass Ball Valves L or T Port Design, 400 PSI WOG 1/4 to 3 NPT SERIES Features Standard Port 3-way L or T flow path Four seat design allows for full pressure at any port Hand lever operator Actuator
Direct-operated, Back Pressure Regulating Valve. Features
MK508BPM Series Direct-operated, Back Pressure Regulating Valve The MK508BPM series are spring loaded, self actuated, direct-operated, valves. Pressure relief valves are used to protect the system from
Mark 75PTP Series JORDANVALVE. Piston Operated Wafer Style Control Valves. CRN Registration Number Available
Mark 75PTP Series CRN Registration Number Available Piston Operated Wafer Style Control Valves The Mark 75PTP is a Mark 75 wafer style control valve with an 80mm (1" - 2"} Stainless Steel Piston Actuator.
VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1
SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators
Mark 6127 Series. Pressure Regulators Mark 6127 Series. Pressure Reducing Valves. Valve Features. Operation
Mark 6127 Series Pressure Reducing Valves The primary function of the Mark 6127 is to reduce a greater upstream pressure to a lesser, more manageable downstream pressure, operating without regard to either
3-Way Lead Free Brass Ball Valves Full Port, L or T Flow Path, 400 PSI CWP 1/4 to 2 NPT
3-Way Lead Free Brass Ball Valves Full Port, L or T Flow Path, 400 PSI CWP 1/4 to 2 NPT SERIES Features FULL PORT 3-way L or T flow path Functions as a diverter, selector or mixing valve Four ball seat
SECTION Pressure & Temperature Control
16 Pressure & Temperature Control ARMSTRONG PRODUCT CATALOGUE 70 Pressure Reducing s Pressure Reducing s Armstrong pressure reducing valves (PRVs) and temperature regulators help you manage steam, air
Manual & Automated Ball Valves
Manual & Automated Ball Valves Fire Safe Valves Metal Seated Valves Three Way Valves Automated Valves Standard Service Three Piece Ball Valves Product Matrix for Marwin Valves Model 4600 Series 8700 Series
Models 910, 911, 916, 917, 920, 921, 927 ASME Section VIII, Air/Gas/
Models 910, 911, 916, 917, 920, 921, 927 ASME Section VIII, Air/Gas/ Steam/Liquid, UV National Board Certified. Also available for Vacuum Service Model 921: Steel body and bonnet with plain lift lever
Manual & Automated Ball Valves
Manual & Automated Ball Valves Fire Safe Valves Metal Seated Valves Three Way Valves Automated Valves Standard Service Three Piece Ball Valves Product Matrix for Marwin Valves Model 9000 Series DM9000
Direct or Reverse-Acting?
Control Valves Use of Positioners Minimize the effects of friction & hysteresis / reduce dead band. Increase differential pressure capability. Permit split range operation / high rangeability in slow response
Mark 9020 Series. Sanitary Valves Mark 9020 Sanitary Ball Valves. Sanitary Ball Valves
Mark 9020 Series Sanitary Ball Valves The Mark 9020 Series ball valves take ASME BPE guidelines to heart. This valve was designed from the beginning to meet every aspect of ASME BPE 2007. From the materials
Air Actuated 3-Way Ball Valves T-Port, Lead Free Brass, Full Port 1/4 to 2 NPT
Air Actuated 3-Way Ball Valves T-Port, Lead Free Brass, Full Port 1/4 to 2 NPT SERIES Features Full Port Lead Free Brass Diverter Valve Spring return or double acting actuators Ball Valve direct mounted
Ideal Installation. I & M Mark 80. Bulb Installation PROTECT VALVES WITH LINE STRAINERS
I & M Mark 80 370 Wasson Road Cincinnati, OH 4509 USA Phone 53-533-5600 Fax 53-87-005 info@richardsind.com www.jordanvalve.com Installation & Maintenance Instructions for Mark 80 Temperature Regulator
Ideal Installation. I & M Mark 80. Bulb Installation PROTECT VALVES WITH LINE STRAINERS
I & M Mark 80 370 Wasson Road Cincinnati, OH 4509 USA Phone 53-533-5600 Fax 53-87-005 info@richardsind.com www.jordanvalve.com Installation & Maintenance Instructions for Mark 80 Temperature Regulator
SERIES 2000 TEMPERATURE REGULATOR SERIES 2000 TEMP. REGULATOR. SIZES 1/2" 2" CONTROLS -25 to 400 F
SERES 2000 TEMP. SERES 2000 TEMPERATURE APPLCATON DATA DRECT ACTNG Bottle Washing Machinery Steam Tables Plating Tanks Heating Ducts Fuel Oil Heaters Cooking Vats Water Heaters Heat Exchangers Parts Washer
VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
The GACHOT V501 gate valve offer the most possible reliability for process and critical applications
The GACHOT V501 gate valve offer the most possible reliability for process and critical applications Features Construction complies with NF EN 1984 Straight-through flow and full port Cast body (investment
UNIWORLD series PNEUMATIC VALVES
UNIWORLD series PNEUMATIC VALVES 5100AD/E 07 2013 SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME
CV3000 Series. Control Ball Valve 4000 psi WOG (276 bar) Fully Customizable Flow Control Inserts Carbon, Stainless, Alloy Bar Stock Construction
4 psi WOG (276 bar) CV3 Series CV3F-xxx Series Full Port Valve CV3R-xxx Series Reduced Port Valve Features Uni-directional control valve Zero leakage shutoff, soft seated Upstream Cv plate control element
HELYON PRESSURE REDUCING VALVE MODEL M1
PRESSURE REDUCING VALVE MODEL - 5 Chemin du Jubin 69570 DARDILLY MAIN CHARACTERISTICS The model is self-operated bellows sealed pressure reducing valve. This series of regulators is suitable for steam,
Single Seated Globe Control Valves
Product 1: Top Guided Single Seated Control Valves Type: Globe Size: 1-1/2'', 2'', 2-1/2'', 3'', 4'', 6''and 8 (DN40 DN200) Pressure Rating: ANSI 125 ~ ANSI 600 (PN16~PN64, JIS10K~JIS40K) Body Material:
10000F Series. High Pressure Ball Valve 6000 psi WOG (414 bar) Multiple End Connections Carbon, Stainless. Alloy Bar Stock Construction
1F-xxx Series Valve Quick Spec Product Scope Size Range 1/4" 2", (Sch 16 Pipe Bore) 2"Reduced; 3" Double Reduced Body Type 3-pc, non Swing-out design, Optional Ends Pressure Rating up to 6 psi WOG & up
Series 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
15100 VALVES. E. Section Building Automation and Control System Guidelines
15100 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 15050 Basic Material and Methods B. Section 15545 Chilled Water System C. Section 15550 Heat Generation D. Section 15790 Coils E. Section 15955
THE SLIDING GATE SEAT: A BETTER DESIGN
PRODUCT OVERVIEW THE SLIDING GATE SEAT: A BETTER DESIGN SIMPLE CONCEPT, SUPERIOR PERFORMANCE You will notice something different in a Jordan valve... the sliding gate seat. A remarkably simple concept
THE SLIDING GATE SEAT: A BETTER DESIGN
PRODUCT OVERVIEW THE SLIDING GATE SEAT: A BETTER DESIGN SIMPLE CONCEPT, SUPERIOR PERFORMANCE You will notice something different in a Jordan valve... the sliding gate seat. A remarkably simple concept
DBOY Series Pneumatic Control Valve
Applications Process control systems for food, pulp and paper, chemical, petrochemical & other industries HVAC systems Feed water and fuel system controls in boiler rooms Packaged systems (OEM) such as
KOSO HAMMEL DAHL. Specifications. Body Size: Globe - 1/2" through 6" ( mm). Angle - 1/2" through 2" (15-50 mm).
control valves KOSO HAMMEL DAHL B U L L E T I N G 1 3 0-1 FEATURES Cage-retained quick change seat ring simplifies maintenance. Metal seats for a variety of services and ANSI IV and V shutoff. Soft seat
Exploded view 3 piece ball valves Series R
Exploded view 3 piece ball valves Series R Ball valve of series R with reduced bore (standard version) DN10 to DN65 Example shown: Series R DN65 Please follow assembly and maintenance instructions carefully.
TYPE ET14 TEMPERATURE REGULATOR CAST IRON, BRONZE or STEEL CONTROLS 20 to 500 F
TYPE ET14 TEMPERATURE REGULATOR CAST IRON, BRONZE or STEEL CONTROLS 20 to 500 F Temperature Regulation for Batch Process Storage Heaters (Water, Fuel Oil or Chemical) Air Heating TYPE ET14 TEMPERATURE
3000R Series. Reduced Port 2-Way 3-pc Body
Up to 4 psi WOG (276 bar) 3R Series 3R-xxx Series Valve Quick Spec Product Scope Size Range 1/2", Body Type 3-pc, non Swing-out design End Connections Flanged, NPT, Weld, Custom Pressure Rating up to 4
* T Temperature-Indicating Dial (Must be field set and calibrated to an actual thermometer)
175/153 Series Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2006 Watson McDaniel Company 175 HEATING 153 COOLING 175 / 153 Screwed Connection
2-Way & 3-Way Non Spring Return Characterized Ball Valves
VCB30 Series Revision Date June 6, 2014 2-Way & 3-Way Non Spring Return Characterized Ball Valves General The VCB30 Series electric rotary-motion actuatordriven characterized ball valves are designed specifically
JRPH/JRPL Series. Pressure Reducing Valves. a division of Jordan Valve PRESSURE REDUCING VALVE JRPH & JRPL SERIES FLOW CONFIGURATIONS
a division of Jordan Valve JRPH/JRPL Series Pressure Reducing Valves PRESSURE REDUCING VALVE The LowFlow JRPH Series and JRPL Series are piston operated, balanced trim pressure regulators with high Cv's
3L/T 2100F-F Series. Ball Valve, 3 Way Class 150 (150# FE) 150# Flanged Ends, Side Entry, 1/2" - 6" Stainless or Carbon Steel.
L/T-2100F-BF-CS Series L/T-2100F-BF-S6 Series Quick Spec Product Scope Size Range 1/2" - 6" 150# Flanged Ends Port Type Full Port Port Type L-Port or T-Port Port Orientation Side Entry Pressure Rating
W94. Specifications. Protection: Models Temperature Range Capillary Length Sensing Bulb Valve Body Selection
Temperature Model W91 (No Indicating Dial) W94 (Temperature Indicating Dial) Service Water, Steam, Other Liquids Sizes 1/2 4 onnections Threaded, Union Ends, 125# FLG 250# FLG (optional) ody Material 1/2
VA, VF, and VS Series Direct Mounted Globe Valve Assemblies. Application. Features
TAC 1354 Clifford Avenue P.O. Box 2940 Loves Park, Illinois 61132-2940 www.invensysibs.com Two-Way and Three-Way Globe Valve Assemblies with 220 lbf Linear (979 N) Spring Return DuraDrive Actuators Submittal
3-way control valve in mixing and diverting design
with electric and pneumatic actuators 3-way control valve in mixing and diverting design 1/2-6 STEVI 450 / 451 Electric actuator Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices
Ball Valves & Accessories
Ball Valves & Accessories 2 Proven quality since 1892 Econosto, part of the ERIKS group, has been offering a wide variety of engineered products since 1892. By focusing on technical superiority along with
1/4" JRPH/JRPL Series
1/4" JRPH/JRPL Series Pressure Reducing Valves PRESSURE REDUCING VALVES The 1/4" LowFlow JRPH Series and JRPL Series are piston operated pressure regulators that offer excellent control at Cv's of 0.20
Compact Electric Actuated 3-Way Ball Valves T-Port, 316 Stainless Steel, Full Port 1/4 to 3/4 NPT
Compact Electric Actuated 3-Way Ball Valves T-Port, 316 Stainless Steel, Full Port 1/4 to 3/4 NPT Features Industrial quality miniature actuator Full Port direct mount 3-way stainless steel ball valve
Python Series Control Valves
Python - 1500 Series Control Valves Control valves are a key component in any pressure or temperature control application. With the increasing cost of fuel, delivering media in the most efficient way increases
Ideal Installation. I & M Mark 67 (1/2 6 ) Control Line. Installation & Maintenance Instructions for Mark 67 Pressure Regulators
I & M Mark (/ ) 0 Wasson Road Cincinnati, OH 0 USA Phone --00 Fax -8-00 info@richardsind.com www.jordanvalve.com Installation & Maintenance Instructions for Mark Pressure Regulators Warning: Jordan Valve
SHARPE HIGH PERFORMANCE VALVES STANDARD FEATURES ADVANTAGES
SHARPE HIGH PERFORMANCE S Sharpe 77-3 & 4 Way Ball Valves offer as standard features, advantages that other valve manufacturers offer only as costly extras. This is the Sharpe advantage. STANDARD FEATURES
SERIES 830T THREE WAY VALVE
SERIES 80T THREE WAY VALVE The series 80T three-way valve is designed for diverting service or mixing service applications. A diverting service valve takes common stream and splits it into two outlet ports.
3000F Series. Full Port 2-Way 3-pc Body
Up to 4 psi WOG (275 bar) 3F Series 3F-xxx Series Valve Features Up to 4 psi service Special barstock body material options including Alloy 2, Duplex, Hastelloy C, Monel, Titanium, 254 SMO, Bronze and
SELF-ACTUATED TEMPERATURE REGULATOR
INDUSTRIAL PRODUCTS DIVISION SELF-ACTUATED TEMPERATURE REGULATOR Selection Guide With Compatible Valve Data Industrial Products Division Robertshaw Industrial Products Division 1602 Mustang Drive Maryville,
Control Valves Series 2000 Heavy Duty valve 2 way
Series 2000 Heavy Duty valve 2 way Technical data Size (DN) DN 15 150 Pressure rating PN16, PN40 ANSI 300 Connections Flanges UNI/DIN PN16, PN40 Flanges ANSI 300 Type sealing Metallic (Class IV - V), soft
VALVES. A. Section HVAC Basic Materials and Methods. E. Section Building Automation and Control System Guidelines
230523 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 230500 HVAC Basic Materials and Methods B. Section 230510 Chilled Water System C. Section 230520 Heat Generation D. Section 238216 Coils E.
Electric Actuated 3-Way Ball Valves T-Port, Stainless Steel, Full Port 1/4 to 2 inch NPT
Electric Actuated 3-Way Ball Valves T-Port, Stainless Steel, Full Port 1/4 to 2 inch NPT SERIES Features Full Port 316SS diverter valve Polyamide IP67 weatherproof enclosure with UV protection Multi-voltage
5801 Series. Flanged Ball Valves, API 607 Firesafe. ASME Class 150, Flanged Ends. Reduced Port. 2-pc, Split Body. Carbon or Stainless Steel
langed Ball Valves, API 67 iresafe ASME Class 1 81 Series eatures Investment cast 2-piece bolted body construction Blow-out proof stem Reinforced seats Adjustable, live-loaded graphite packing API 98 inspection
Python 1500 Series Control Valves. Pneumatic and Electric Actuators PYTHON
Python 1500 Series Control Valves Pneumatic and Electric Actuators PYTHON - 1500 Series Control Valves Control valves are a key component in any pressure or temperature control application. With the increasing
Mark 978 Series STERIFLOW. Sanitary Control Valve. Sanitary Valves Mark 978 Globe-Style Control Valve AVAILABLE FINISHES FEATURES APPLICATIONS
Mark 978 Series Sanitary Control Valve The Mark 978 Sanitary Control Valve Series is designed to meet the required specifications for sterile process control valves. The MK978 Series is suitable for a
Air Actuated Ball Valves 2-Way, Lead Free Brass, Full Port 1/4 to 3 NPT
Air Actuated Ball Valves 2-Way, Lead Free Brass, Full Port 1/4 to 3 NPT SERIES Features Spring Return or Double Acting Actuators Lead Free Brass Ball Valve with ISO5211 direct mounting Full port design
6801 Series. Flanged Ball Valves, API 607 Firesafe. ASME Class 300, Flanged Ends. Full Port. 2-pc, Split Body. Carbon or Stainless Steel
Features Investment cast 2-piece bolted body construction Blow-out proof stem Reinforced seats Adjustable, live-loaded graphite packing API 598 inspection and testing API 67 5th Edition fire tested Locking
TY-FLO 3 Piece Ball Valves
OTHER PRODUCTS Other Products TYLOK International carries a comprehensive range of high-quality fluid components to compliment the TY-FLO 3 Piece Ball Valve product line. Featured below are several popular
3 & 4-Way Rotary Valves
Applications: 3-way Valve 4-way Valve The ESBE 3 and 4-Way rotary valves type F are designed for mixing or diverting applications on heating and cooling systems. The valves are capable of controlling and
BERMAD Waterworks. 800 Series. Technical Specifications Metric
Technical Specifications SI 800 Metric Series Patterns and Sizes "Y" Pattern DN40-500 Angle DN40-450 Connection Standard Flanged: ISO 7005-1(ISO 10, 16, 25 & 40) Water Temperature Up to 80ºC Working pressure
Electric Actuated 3-Way Ball Valves L-Port, PVC Body, Teflon/EPDM Seals 1/2 to 2 inch Pipe
Electric Actuated 3-Way Ball Valves L-Port, PVC Body, Teflon/EPDM Seals 1/2 to 2 inch Pipe SERIES Features Industrial grade PVC ball valve with PTFE/EPDM seals IP67 weatherproof polyamide enclosure with
PYTHON 1500 SERIES CONTROL VALVES. Pneumatic and Electric Actuated
PYTHON 1500 SERIES CONTROL VALVES Pneumatic and Electric Actuated Table of Contents Features and Benefits... 3 Specifications, Weights, and Dimensions... 4-5 Trim Options and CV Values... 6 Pneumatic Actuators...
3-way 1/2-2 Globe Valves
Datasheet Overview Designed to work with either an electronic actuator with a 3/4-inch (20 mm) stroke, the three-way globe valves are available in ANSI Class 250 for normally closed or normally open action.
TY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FeaTUreS 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
Technical specification. Application NAF ProCap is a batch digester capping valve for chips filling in a safe and time saving way. NAF Control Valves
NAF ProCap Capping valve DN00-70, ANSI -0 PN6, ANSI Class 0 Fk.(0)GB 0.7 Primary characteristics NAF ProCap, Capping valve for automated filling of wood chips to the batch digester in Pulp industries.