Workshop furnishings. Tool cabinets with swing doors (empty) Universal Cabinets (Empty) Shelves for cat.-no

Transcription

1 ß Tool cabinets with swing doors (empty) 4260 g Very robust and great to use: C+P tool cabinets can handle almost everything. This double-wing door construction with 4 adjustable storage shelves is the most sold tool cabinet for general workshops. Sheetsteel construction, double-seamed doors with inside hinges. Reinforced on the inside. Flush box lock with three bolts. 2 keys, shelves, galvanised, 70 kg load capacity per shelf. Load capacity approx. 500 kg. External dimensions: H x W x D 1950 x 930 x 400. Internal dimensions: H x W x D 140 x 92 x 352. Other models with different widths and depths see cat.-no Ergo-Lock lock with recessed handle, wearresistant and userfriendly Additional shelf W x T 927 x 352, with 4 shelf supports Colour palette: Housing Doors Cabinets Additional shelf Colour Colour housing doors RAL 7035 RAL RAL 7035 RAL RAL 7035 RAL Universal Cabinets (Empty) E Housing made of sheet steel, plastic-coated. Smooth front, when doors are closed. Folding doors fully reinforced, opening angle more than 200, rods and levers in guidings. 4 galvanised shelves, adjustable in increments of 10, 0 kg load capacity when load is distributed evenly. Safety cylinder lock with 3 lock bars and turning handle. Standard finish: Housing RAL 7035 light grey, doors RAL 5012 light blue, powder-coated. Further group or master keys are available on request RAL 7035/5012 RAL 7035 External dimensions H x W x D x 1000 x x 1000 x Shelves for cat.-no for depth of cabinet

2 Cabinets Tool Cabinets/Wardrobe and Filing Cabinets (Empty) g Made of sturdy sheet steel, doors with inside hinges, flush lock with profile cylinder, three bolts, with 2 safety keys, shelves galvanised and adjustable in height, load capacity approx. 70 kg, adjustable in increments of 15. Load capacity 500 kg. Standard finish: RAL 7035 light grey Folding door cabinet, width 930. With 4 adjustable shelves, galvanised. Ergo-Lock lock with recessed handle, wearresistant and userfriendly. Colour example 930 and/or Wardrobe and filing cabinet, width 930. With vertical compartment divider, right side with 4 adjustable shelves, left side with hat shelf, retractable clothing bar below, filing compartment 370, clothing section width Folding door cabinet, width With 4 adjustable shelves, galvanised Tool cabinets with large storage space, width With 3 telescopic drawers, fully retractable with approx. 50 kg load capacity/push, with 4 storage shelves above. Drawers visual dimensions 100 x 1004 x Colour example Additional shelves. W x D 927 and/or 1197 x Additional shelves. W x D 927 and/or 1197 x Colour example 5126 Additional shelves. W x D 927 and/or 1197 x 552. Colour example 500 External dimensions H x W x D x 930 x x 930 x x 930 x x 1200 x x 1200 x x 1200 x Additional shelves for depths For cabinets cat.-no

3 ß Tool cabinets with swing doors (empty) g Large cabinet space, meticulously manufactured sheet steel design. Shelves adjustable in height, load capacity of shelves 70 kg. Load capacity of cabinet 500 kg. Doors with inside hinges, three bolts, with cylinder lock (2 keys) Upper left side 1 locker for valuables, below large drawers, right side with 4 shelves. Drawer dimensions (useful dimensions) H x W x D 170 x 367 x 43. Standard finish: RAL 7035 light grey. 512 Left side 3 locker for valuables and 4 small drawers, right side with 3 shelves and 2 large drawers. Drawer dimensions (usable dimensions): Drawer small H x W x D 2/70 x 367 x 43. Drawer large H x W x D 170 x 367 x 43. Standard finish: RAL 7035 light grey Drawer fittings. Colour example Colour example galvanised compartment dividers, approx. height Plastic cases, L x W x H pcs. 106 x 0 x 54, 16 pcs. 0 x 53 x 54, pcs. 53 x 40 x 54. Ergo-Lock lock with recessed handle, wearresistant and userfriendly Dimensions H x W x D x 930 x Compartment dividers 101 Plastic cases 102 S S. 5.1 S. 5.4 S. 2.1 S S. 2.9 Everything from one source. We customize your workshop using CAD technology. Need some advice? Contact us: betriebseinrichtung@hhw.de S. 1.5 S

4 Cabinets Cabinet with swing doors with shelves 5140 Sturdy sheet steel design with doors with windows made of break-proof acrylic glass. Reinforced doors, centralised locking by means of turning handle with cylinder lock (incl. 2 keys). Galvanised shelves included, height-adjustable in increments of 17. Load capacity per shelf 0 kg at equal distribution. Finish: Housing RAL 7035 light grey, doors RAL 5012 light blue. Further colours available on request Additional shelves see cat.-no Shelves Galvanised, 4 shelf supports included. Load capacity per shelf 0 kg at equal distribution. For cabinet with swing doors cat.-no Doors with windows shelves H x W x D compartment divider number of Total load for depth of cabinet shelves kg 1000 x 1000 x x 1000 x x 1000 x x 1000 x x 93 x x 93 x ß With plastic roller blinds. Precisely manufactured, made of high-quality thin sheet. Upper opening direction of shutter. Tools are stored safely and dust is kept away thanks to the roller blinds (lockable), shelves not included. Standard finish: RAL 7035 light grey. Further finishes in RAL 3003, 3020, 5012, 5013, 5015, 6011 and 9005 available without additional cost (not in stock). Tool cabinet (without shelves) Shelf 950 x 41, adjustable in increments of 25, load capacity 100 kg The shelves (cat.-no ) must be ordered separately. Example with 4 shelves. Cabinet Shelf Dimensions H x W x D x 1000 x Shelf

5 ß Cabinets for heavy loads (empty) for 1,65 t load capacity E Load capacity up to 1,65 tons. The floor of the cabinet by itself has a load capacity of 400 kg at equal distribution. Extremely sturdy, welded steel construction, corners brazed. Shock and scratchproof plastic coating. Housing light grey. Doors by default light blue or light grey. Available on request doors in gentian blue or reseda green (not in stock). As an option: double-walled reinforced doors or doors with windows. Front-built doors for a smooth front, opening angle greater than 200. Continuous rodding guiding. Telescope-guided drawers with 100 % extension. Drawer load capacity 110 kg at equal distribution. Adjustability grid pattern 25. Three-bolt security cylinder lock Drawer stop available on request. Additional shelves see cat.-no Without middle divider. Drawers W x D 900 x 520. Galvanised shelves, load capacity 160 kg at equal distribution With middle divider. Drawers W x D 443 x 500. Galvanised shelves, load capacity 0 kg at equal distribution. Different types of doors: - viewing window - Perforated panel (available on request) - slotted panel (available on request) - double-walled sheet metal doors without centre divider RAL 7035/5012 RAL 7035 RAL 7035/5012 RAL 7035 Dimensions shelves drawers drawers drawers Doors H x W x D H 100 H 125 H 175 Sheet metal doors 1950 x 1000 x Sheet metal doors 1950 x 1000 x Sheet metal doors 1950 x 1000 x Sheet metal doors 1950 x 1000 x Doors with windows 1950 x 1000 x Doors with windows 1950 x 1000 x Doors with windows 1950 x 1000 x Doors with windows 1950 x 1000 x with centre divider RAL 7035/5012 RAL 7035 RAL 7035/5012 RAL 7035 Dimensions shelves drawers drawers drawers Doors H x W x D H 100 H 125 H 175 Sheet metal doors 1950 x 1000 x Sheet metal doors 1950 x 1000 x Sheet metal doors 1950 x 1000 x Sheet metal doors 1950 x 1000 x Doors with windows 1950 x 1000 x Doors with windows 1950 x 1000 x Doors with windows 1950 x 1000 x Doors with windows 1950 x 1000 x

6 Heavy-load cabinets Cabinets for cordless devices and accessories Wardrobes 5166 Cabinets for heavy loads (empty) for 1,65 t load capacity E Load capacity up to 1,65 tons. The floor of the cabinet by itself has a load capacity of 400 kg at equal distribution. Extremely sturdy, welded steel construction, corners brazed. Shock and scratchproof plastic coating. Housing light grey. Doors by default light blue or light grey. Available on request doors in gentian blue or reseda green (not in stock). Reinforced doors. Front-built doors for a smooth front, opening angle greater than 200. Continuous rodding guiding. Telescope-guided drawers with 100 % extension. Drawer load capacity 110 kg at equal distribution. Adjustability grid pattern 25. Three-bolt security cylinder lock Drawer stop available on request. Additional shelves see cat.-no Without middle divider. Drawers W x D 900 x 520. Galvanised shelves, load capacity 160 kg at equal distribution With middle divider. Drawers W x D 443 x 500. Galvanised shelves, load capacity 0 kg at equal distribution. RAL 7035/5012 RAL 7035 Dimensions centre shelves drawers drawers drawers doors H x W x D divider height 100 height 125 height 175 Sheet metal doors 1110 x 1000 x 600 without Sheet metal doors 1110 x 1000 x 600 without Sheet metal doors 1110 x 1000 x 600 with Sheet metal doors 1110 x 1000 x 600 with Shelves for Cabinets for Heavy Loads Sheet steel, galvanised, with shelf supports For cat.-no. 5160, and Dimensions W x D load capacity per shelf type 510 kg 935 x x right x left ß 3-point safety lock. Behind each shelf, mounted on an additional back wall (approx cm in front of the cabinet back wall), is a 6-x multiple socket outlet 230 V with fuse. Cabinet, swing doors and shelves extra grounded. Cabinet with air vents in front and back, fan and peripheral device outlet, 16 A, on the side for receiving a 30 V plug, within the cabinet distribution box with 3 fuses. Assembled and wired. For securely and clearly storing battery chargers and cordless devices. Cabinets for cordless devices and accessories (empty) fixed shelves, 1 drawer 90 high with 100 % extension fixed shelves, 1 shelf adjustable (not grounded), 1 drawer 90 high with 100 % extension For cat.-no. 5165, and Dimensions H x W x D number of number of 515 shelves drawers 1030 x 1000 x x 1000 x

7 ß Wardrobes with Stands or Bases g Made of stable sheet steel, torsion-resistant doors thanks to solid lateral profiles, door damper, smooth front, no projecting air vents. Rotating handles and safety lock with lock protection (for padlock cat.-no cont.). External dimensions: H x D 150 x 500 with stands, 100 x 500 with base. Compartment width: 300. Standard finish: RAL 7035 light grey Stands 150 high Base 100 high Base 100 high, doors lock in opposite direction, so one lock can be used for two compartments, e.g. for storing working and civilian clothes. with stands with base with base Number of Total width compartments Wardrobes Made of welded sheet steel, on base, doors with label frames, air vents and turning locking bar for padlocks. Finish: RAL 7035 light grey, powder-coated. Also available on request with legs Number of external dimensions H x W x D 5307 compartments x 300 x x 600 x x 900 x x 1200 x Wardrobe Cabinets with Benches g Seats made of beechwood as standard, cross section dimensions approx. 60 x 35, planed on all sides, rounded on top, clear varnish, with natural colour variations. Bench Base Frames RAL 7021 Dark Grey. Finish: RAL 7035 light grey. External dimensions: Cabinet H x D 2090 x 500, bench H x D 420 x 315. Total depth 15. All doors with turning locking bar, suitable for the use of a padlock Number of Total width 5312 compartments

8 Benches Wardrobes and small Compartment Cabinets Tool Cabinets for Grinding Wheels 5325 Free Standing Bench With 4 stands and shoe rest. Stable design made of square and rectangular steel with wear-resistant enamel coating. Bench slats made of fully shaped hardwood strips, profile dimension approx. 60 x 30, natural finish. Frame with plastic caps adjustable in height for balancing uneven floors. Supplied pre-assembled and ready to use. Finish: Frame RAL 7021 dark grey. Further dimensions available on request External dimensions H x W x D x 1500 x ß Made of sheet steel, base height 100, 2 compartments above each other, one door per compartment, clothes rail and 3 sliding hooks. Each upper and lower door with 1 ea. hole rosette, punched label frame and turning locking bar for padlocks. External dimensions: Height x depth 100 x 500. Compartment width: 300. Standard finish: RAL 7035 light grey. Doubledeck Wardrobes (Empty) Padlocks cat.-no cont. Picture shows special finish Number of Total width 5310 compartments 2 x x x Small Compartment Cabinets (Empty) Smooth doors, without hole rosettes and without label frames. Each door with cylinder lock and 2 keys. Standard finish: RAL 7035 light grey Height 100 with base available on request. Picture shows special finish doors above each other. Useful dimensions per compartment: H x W x D 375 x 230 x doors above each other. Useful dimensions per compartment: H x W x D 295 x 230 x External dimensions H x W x D number of 5317 compartments/doors 150 x 610 x 500 2/ x 900 x 500 3/ x 1190 x 500 4/ External dimensions H x W x D number of 531 compartments/doors 150 x 610 x 500 2/ x 900 x 500 3/ x 1190 x 500 4/

9 ß 5400 Tool Cabinets for Grinding Wheels (Empty) Inside cabinet lockable. A stable column, which takes the holders for the wheels, is mounted within a rigid angle steel frame. The swivelling arms are made of sectional square steel, are welded on bushes and are carrying the mounting bolt. Lubrication allows for easy handling. Each swivelling arm has a mounting bolt, which fits to the grinding wheel flanges. Mounting bolts can be manufactured by the customer. When installing the cabinet, make sure that it is mounted to the floor to prevent tilting. At additional cost, an anti-tilting safety device is available, which prevents swivelling out of more than one grinding wheel. Finish: RAL 6011 reseda green. Easy handling. Safe and clear stocking, balanced drying, no unbalanced mass. When placing the order, provide the dimensions of the grinding wheel flanges. Grinding wheel cabinets with different designs or dimensions available on request Base frame size Number of Distance between Height Max. grinding 5400 W x D arms arms wheel Ø SSR x SSR x SSR x SSR x Heavy-duty retractable shelves For storing heavy goods, such as tools, moulds, engines. The shelves which are retractable from one side, have a wooden floor to facilitate handling of goods. Goods can be handled with hoists. Please contact us.. h -MULTISTRONG cantilever shelf Single-sided version Double-sided version Available types: L for light weight loads for storing stand-up and lie-down storage of long goods. for storage of panels and plates. for hot-rolled profiles IPE 120 standard post height: 2.000, 2.500, standard distance between axes 1.030, standard depth of cantilever (single and double-sided): 400, 500, 600 M for medium weight loads for storing stand-up and lie-down storage of long goods. for storage of panels and plates. for hot-rolled profiles IPE 140 standard post height: 2.000, 2.500, standard distance between axes 1.030, standard depth of cantilever (single and double-sided): These shelves fulfill all requirements and guidelines of the professional employers liability insurance companies BGR

10 Shelves. Industry and storage shelves cat.-no HHW plug-in shelving system, galvanised Great compatibility and adaption possibilities, therefore the system can be used for different kinds of use. Therefore, low consequential costs. The system is perfect for all applications, it fulfils all present-day shelving system requirements. Variable depth: Thanks to the easy exchange of the cross bars the depth of the shelves can be varied. Better distribution of loads: Each shelf rests on two cross bars and not just on four corners. Better stability: Due to the usage of several narrow shelves, the load capacity per compartment is increased, e.g. shelf 500, consisting of one ea. base panel 300 and 200 wide. Quality feature Quality assurance by means of tests of material, design, and statics. In compliance with employers' liability insurance company UVV BGR 234. Permanent in-shop testing in compliance with DIN ISO Accessories include compartment dividers, back wall, lateral walls, decorative wall, pendulum and hanging filing systems, door systems and much more. Lacquered shelving available on request Basic and extension shelves - plug-in systems, galvanised Load capacity values are for equally distributed loads. Height of shelves 2640/3000 and width of shelves 1200 available on request. Additional shelves see cat.-no Basic shelves Set of all required components (incl. of cross brace), not assembled. Field loads 2500 kg ea. (with distance between shelves 400 ) Extension shelves For basic shelves cat.-no Includes cross brace for every 2. shelf, not assembled. Field loads 2500 kg ea. (with distance between shelves 400 ) Basic shelf Extension shelf Height of shelf compartment width Length of shelf shelf depth load capacity per shelf number of shelves kg pcs Basic shelf Extension shelf Height of shelf compartment width Length of shelf shelf depth load capacity per shelf number of shelves kg pcs Shelves (Panels) Made of sheet steel, front edge bent 3-fold. Galvanised, with 2 cross bars. For cat.-no compartment depth 300 = 1 panel, 300 wide, compartment depth 400 = 2 panels, 200 wide, compartment depth 500 = 2 panels, 200 and 300 wide, compartment depth 600 = 2 panel, 300 wide. Compartment depth compartment width

11 ß h Wide-Span Shelving Systems -Speed-Rack- (empty) Fitted with steel panels available on request Wide-span shelving system of simple design, with isoscele, syetrical angle sections. Especially userfriendly when it comes to planning, carrying out and assembly. 4 shelves, load capacity at equally distributed load 500 kg. Field loads up to max kg at equally distributed load, stepped beams adjustable in 50 grid pattern. Profiles and beams galvanised. All-around edge protection of wooden shelves thanks to flush assembly inside the stepped beam. Scope of supply: stepped beams (a) in length direction, stepped beams (a) in depth direction, 4 support profiles (b), 4 plug-in bases, A-binding beams (c), 4 chipboards/shelves (d), 4 washers Additional shelves For wide-span shelving system cat.-no Shelf Width 2000 Height Depth Additional shelves Width Depth h-pallet shelving systems Plug-in base Stepped beam Compartment load capacity shelf min. Increase of the final post in compliance with the directives of the employers' liability insurance companies Shelf load capacity min. 100 from upper edge of the pallet up to lower edge of the beam beams 50 : 50 adjustable height clearance min. 100 from th top of the uppermost pallet Quality mark: RAL - RG 614 pren or compartment width Basic shelf or compartment width Extension shelf Lift height for handling equipment, upper edge of top beam plus 200. Field load capacity is given for shelf units consisting of 1 basic shelf and at least 3 extension shelves and at least 2 pairs of beams per field Pallet Shelving System (empty) hmultipal Shelves are adjustable in increments of 50. Frame surface galvanised, beams RAL 2001 redorange, plastic-coated. Incl. of assembly parts. Basic shelf with 2 frames, extension shelf with 1 frame. All shelves unassembled. For pallet weights of up to 750 kg. The perfect solution for storing bulky items or items on pallets. Quick access at the point of processing, in the warehouse, at the point of allocation Height of shelf Length of shelf Depth of shelf Euro-pallets positions Compartment Field 5547 incl. of floor position load capacity kg load capacity kg

12 Pallet Shelving 5551 Pallet Shelving Frames SR 5/17 + SR 5/20 hmultipal Frame depth Permitted frame load capacity in dependence of compartment height (see chart on right-hand side). Frame surface galvanised. Safety regulationsin compliance with ZH 1/42: The end frames must be 500 higher than the middle frames. Incl. of 2 floor-mounting bolts M 10 (see cat.-no. 5552). Frame shelving with higher load capacity available on request. Frames are supplied unassembled. Plasticcoated version RAL 5010 and with a frame depth of 00 available on request. Field loads Frame type SR 5/17 and 5/20 The frame loads are for shelves with a max. height of m (top beam). The loads are for shelves with: - at least 4 fields, - at least 3 pairs of beams, - equally distributed loads, - a compartment width of up to , x1100= , ,5 2x1100= ,5 62,5 62,5 300 In case the compartment width is between 2700 and 3600, a beam at least HN or stronger is required! In case of smaller beam diameters for these compartment widths, the load capacity is lower. 37,5 62,5 62,5 62,5 62, x1100= , ,5 3x1100= ,5 4x1100= x1100=4400 SR 5/17 SR 5/20 Frame Frame height depth Field loads at a compartment width less than 2700 : beam profiles Stand type compartment height 5/15 5/20 100/20 120/20 140/15 155/17 kg kg kg kg kg kg SR 5/ SR 5/ at a compartment width of more than 2700, less or equal to 3600 : beam profiles 120/20 140/15 155/17 kg kg kg Pallet shelving beams h Finish: RAL 2001, orange. Price per piece. Please order in pairs. shelving frame 5/17 5/20 of beam Length of beam Compartment load Compartment load 5556 HN capacity kg capacity kg 5/ / / / / / / / Max. loading (kg) per beam pair at a compartment height of The load capacity per beam pair is for equally distributed load shelving frame 5/17 5/20 of beam Length of beam Compartment load Compartment load 5556 HN capacity kg capacity kg 120/ / / / / / / / Spacers h Surface galvanised. Required for assembling double shelves Length

13 ß Supports h Load capacity 1100 kg/pair at equally distributed load. Finish: RAL 2001 orange Lightweight depth support Required for cross inserts for storing grid containerpallets or containers. Price per pce Heavy-duty angled support As push stops for storing grid container-pallets or containers. Price per pair for frame depth Lightweight depth support Heavy-duty angled support h 5566 Push stops For single shelving, pallet excess 50. Surface galvanised for beam length Steel Panel h Surface galvanised. Not suitable for pallet storage. at length of beam 100 = 1 pcs., at length of beam 2200 = 22 pcs., at length of beam 2700 = 27 pcs., Warning: It is very important that the permitted load capacity for the beam compartment will not be exceeded! 5564 H x W x D load capacity 5564 kg / pcs. 25 x 100 x h 5565 Wooden Shelves with Z-Sheets Chipboard V20/E 1, 3. With centring sheet metal, rests on the beam. Natural surface Field depth Field width Compartment load capacity 5565 kg Floor Mounting Bolt h M 10, clamping length 25. For shelving frames. 2 needed per shelving frame. Permitted floor inequality in compliance with DIN Beton B Ram Block h Height 400, incl. of floor mounting bolts. Safety colour: black/yellow. For protecting the shelving frames on driveways in compliance with ZH 1/

14 Shelves. h CLIP S3 stacking rack - Good-value stacking rack META CLIP S3 with disassembled Frame for low requirements and lightweight loading of shelves up to 150 kg - field loads up to 1.30 kg - shelves adjustable in height in increments of kg shelves with hole panel: all accessories are possible - edge height of the 150 kg shelf: 40 - Quick assembly without tools - surface galvanised or plastic-coated, RAL 7035 light grey - For technical reasons, the lateral reinforcements are always galvanised, even if the shelving system is plastic-coated The loads are valid for shelving systems with 3 or more fields Dimensions: Basic shelf: nominal length + 56 nominal depth + 36 Extension shelf: nominal length + 6 nominal depth + 36 Safety advice: Secure shelves with height/depth ratio of 5:1 against tilting (on the wall or on the floor). - The loads for fields are valid for shelving systems with 3 or more fields. h CLIP stacking rack - completely clinched frames - multi-purpose shelving systems, one-row, with diagonal beam in the back - very easy-to-assemble plug-in system - shelves adjustable in height in increments of 25 - shelves with holes (grid pattern 50 ) for mounting accessories - extensive range of accessories - surface galvanised or plastic-coated, standard finish: RAL 7035 light grey - The loads for compartments and/or fields are valid for shelving systems with 3 or more fields Dimensions: Basic shelf: nominal length + 56 nominal depth + 36 Extension shelf: nominal length + 6 nominal depth + 36 Safety advice: Secure shelves with height/depth ratio of 5:1 against tilting (on the wall or on the floor). The shelves MULTI STABIL // 230 and 330 may be loaded with max. 200 kg. Qualified advise, state-of-the-art CAD planning, and the dedication of our staff will help our customiers to a cost-efficient and quick solution to your problems. Conceptual design, development, and installation of your warehouse - everything from one source! We will gladly create a suggestion for your warehouse with a customised quote. If you would like information about larger projects, please include a diagram with more details with your request. 5.14

15 ß The multi-purpose shelving system: single or double shelf (back to back). Simple and quick assembly thanks to tightening from the outside. Shelves can be adjusted in a grid pattern of 25. High load capacity and stability. Assembly material included. Shelving System, Galvanised (Empty) Basic shelf Consists of 4 angle sections and 4 shelves Extension shelf Consists of 2 angle sections and 4 shelves Additional shelves Assembly material included. Pack= 2 pcs. Basic shelf Extension shelf Additional shelves Height of shelf Length of shelf Depth of shelf Load capacity of shelf Load capacity of block kg kg Annual inspection required for warehouse installations In short: Warehouse installations/shelves are considered work equipment. They are subject to the occupational safety directive. They must be inspected in compliance with 10 of BetrSichV by qualified personnel. The new European standard DIN EN stipulates the process of inspections of warehouse installations/shelf. New European standard The new European standard DIN EN and the occupational safety directive require that shelving systems be inspected regularly by qualified personnel. The Verband der Lagertechnik und Betriebseinrichtung (Association of storage and associated equipment manufacturers) educates and qualifies shelving inspectors who annually inspect shelving systems on matters of safety. Load capacity of the shelves Complex computer software nowadays is able to optimally design warehouse installations in order to make maximum use of the surface ares. One of the most effective means to reduce the use of material is the reduce the thickness of the material, i. e. thinwalled sheet metal receives better profiles. The load capacity of shelves might be reduced due to marginal damage. Instable shelving systems pose an extraordinary risk for humans, machines, and wares. Occupational safety directive (BetrSichV) According to the applicable German federal ministry, shelves are work equipment and are therefore subject to the occupational safety directive (BetrSichV). The BetrSichV covers the making available of shelf by the employer and the usage of shelves by the employees. 10 of the BetrSichV requires regular inspections of the warehouse installations. 3 requires that type, complexity, and deadlines for required inspections are to be calculated. Complexity and procedures of the inspections of warehouse installations are regulated by the European standard DIN EN 15635, which was published in May, 2007, in Beuth-Verlag. Call or visit us for more information on this new service. Please call: +49 (0)6204 /

16 Panel stands Oil Stock Cabinets Compact trays Drum stands KTC trays Panel Stand/Plug-In Frames 557 Panel stand Load capacity 1200 kg. Sectional steel and tubular steel, welded, powder-coated, RAL 5007 brilliant blue, wooden base. 6 positions for plug-in frames. Internal frame distance rubber stands, floor mounting possible. Six-part roller ramp at face side. Frame not included Plug-in frame With square ends. For panel stand length 1600 (old version) Plug-in frame With round ends. For panel stands length 1600 (cat.-no ). Panel stand Loading surface L x W x Plug-in frame square round height Length Oil Stock Cabinets Made of stable sheet steel, 1,25, with 25 plug-in hole steps. Cabinet housing with two swing doors, turning locking bar with 2 keys. Retractable shelves with ball-bearing slides, load capacity 100 kg, for storing the containers. Drip pans are welded liquid tight and retractable. Containers made of polyethylene, high density, transparent, with screw cap and drain cock. Basic shape rectangular, freestanding, with in-built carrying handle. Standard finish: Housing RAL 7035 light grey, doors RAL 5012 light blue. Further colours available on request. For VbF Class A III liquids such as motor oil, diesel oil, kerosene and silicon oil. The cabinets must be mounted on the floor or on the wall. Further cabinet types available on request Total volume 125 litres, inclusive of: 3 x retractable shelves, 1 x drip pan, 5 x container 5 litres, 4 x container 10 litres, 3 x container 20 litres, Total volume 120 litres, inclusive of: 3 x retractable shelves, 1 x drip pan, 12 x container 10 litres, RAL 7035/5012 RAL 7035/6011 Total volume Dimensions of cabinet H x W x D litres x 1000 x x 1000 x S S. 5.1 S. 5.4 S. 2.1 S S. 2.9 Everything from one source. We customize your workshop using CAD technology. Need some advice? Contact us: betriebseinrichtung@hhw.de S. 1.5 S

17 ß 5569 Compact trays Tray made of 3 sheet steel. Removable, hotgalvanised grate. 100 clearance for forklift transportation. Drums not included. For storing liquids which are flaable or water polluting Corrosion protection thanks to primer and finish Corrosion protection thanks to primer and hot galvanisation. for drums external dimensions W x D x H loading volume Weight 5569 pcs. / litre kg litre kg lacquered RAL / x 20 x lacquered RAL / x 1320 x lacquered RAL / x 20 x hot-galvanised 2 / x 20 x hot-galvanised 4 / x 1320 x Drum stands With sturdy supports for litre drums, fully hot-galvanised. Supports inclined for easy evacuation of drum. Drums not included. Suitable for combination with: - compact trays (cat.-no. 5569) - water protection pallets - hazardous materials stations - safety floor elements - drum carts For drums external dimensions L x W x H 5574 pcs. / litre 1 / x 650 x / x 650 x / x 650 x KTC trays Welded steel construction made of sheet metal. Hotgalvanised, removable grates. 100 clearance for forklift transportation. KTC not included. For storing dangerous materials in large containers Good corrosion protection thanks to primer and hot galvanisation For storing acids and alkalines PE-inserts for all types are available on request. The chemical resistance of the PE-inserts is in compliance with the stability list Good corrosion protection thanks to primer and finish. for KTC dimensions W x D x H loading volume 5605 pcs. kg / m 2 litres lacquered RAL x 1360 x lacquered RAL x 1300 x hot-galvanised x 1360 x hot-galvanised x 1300 x

18 PE-trays Hazardous substances shelves Drum shelves 5606 PE-trays for 60-litre drums Rotation-shaped tray made of PE-HD black. Circumferential reinforcing ribs. Clearance for inhouse transport. Drums not included. For storing aggressive mediums without grate with galvanised grate with PE-grate. for drums external dimensions W x D x H volume 5606 pcs. / litre litre without grate 2 / x 640 x galvanised grate 2 / x 640 x PE grate 2 / x 640 x PE-trays for 200-litre drums Rotation-shaped tray made of PE-HD black. Circumferential reinforcing ribs. Clearance for inhouse transport. Drums not included. For storing aggressive mediums with galvanised grate with PE-grate. for drums external dimensions W x D x H volume 5607 pcs. / litre litre galvanised grate 2 / x 705 x galvanised grate 4 / x 1235 x PE grate 2 / x 705 x PE grate 4 / x 1235 x Rotation-shaped tray made of PE-HD black. Circumferential reinforcing ribs. For standing flat on the floor or on Euro and/or chemicals pallets. Drums not included. For storing aggressive mediums. PE-trays for 200-litre drums with PE-grate without grate with galvanised grate. for drums external dimensions W x D x H volume 560 pcs. / litre litre without grate 2 / x 15 x galvanised grate 2 / x 15 x PE grate 2 / x 15 x

19 ß PE trays for KTC / IBC 5609 Rotation-shaped tray made of UV-resistant PE-HD black, without welds. Circumferential reinforcing ribs for high rigidity and load capacity. Clearance for inhouse transport. KTC / IBC not included. For storing aggressive mediums with galvanised grate with PE-grate PE filling stand For improved stand during filling operations. Grates can easily be taken out thanks to recessed corner for KTC / IBC external dimensions volume pcs. W x D x H litre galvanised grate x 1290 x galvanised grate x 1290 x PE grate x 1290 x PE grate x 1290 x PE filling stand Hazardous substances shelves for small containers (empty) With 1 tray shelf on the lowest level and 4 grate levels. All parts of the shelf, the tray shelves and grate galvanised. Shelves are adjustable in height, grid pattern 25. Load capacity per shelf 200 kg at equal distribution. Sturdy thanks to reinforcement cross bars. Delivery unassembled, easy to assemble. For storing flaable liquids. Thanks to the design of the basic shelf and the extension block, the shelves can be customised as needed external dimensions W x D x H field loads volume 5614 max. kg litre Basic shelf 1060 x 635 x x Extension block 1010 x 635 x x Drum shelves with trays Trays made of 3 sheet steel, hot-galvanised. Basic shelf extension block are compatible with each other. High stability thanks to plug-in and screw connections. Longitudinal cross bars adjustable in height. Load capacity per pair of cross bars 600 kg. Frame parts galvanised, longitudinal cross bars powder-coated RAL 9006 colour aluminium. Drums not included. For lying-down storage and for filling differently-sized containers for 4 drums of 200 litres for 2 drums of 200 litres and 3 drums of 60 litres Rotatable roll-out shelf Ball-bearing mounted, load capacity 210 kg. For clamping onto the existing drum support Container shelf For sliding into the drum support for drums pcs./litres 4/200 2/ /60 accessories external dimensions W x D x H tray dimensions W x D x H Basic shelf without grate 1620 x 00 x x 1320 x Basic shelf with grate 1620 x 00 x x 1320 x Extension block without grate 1620 x 00 x x 1320 x Extension block with grate 1620 x 00 x x 1320 x Roll-out shelf Container support

20 Pallet shelves Drum gripper Safety cabinets 5616 Hazardous substance pallet shelves with trays Pallet Shelving System: Quality mark RAL-RG 614/2 Pallet Shelving System. Fixed supporting frame, therefore short assembly time. Shelves adjustable in height, grid distance 50. Supporting frame galvanised, Longitudinal cross bars plastic-coated RAL 5010 gentian blue. Shelf floor tray: Ü-mark in compliance with steel tray guidelines. Made of 3 sheet steel. Corrosion protection by means of finish RAL 5015 sky blue. Clearance 100. For storing hazardous substances in drums on Euro or chemicals pallets on 2 shelves. The combination of pallet shelves quality mark and shelf floor trays in compliance with Wasserhaushaltsgesetz (federal water act) results in a flexible, cost-efficient and customisable storage system shelf W x D x H internal number of for drums pcs./litres for drums pcs./litres Load capacity Drip pan Trays 5616 dim. of comp. Shelves on Euro-pallet on chemicals pallets of shelf kg W x D x H volumes litres Basic shelf 20 x 1100 x / / x 1300 x Extension block 20 x 1100 x / / x 1300 x Drum gripper for forklifts For lifting a standing-up 200-litre steel drum and horizontal storage of the drum. This forklift attachment takes the standing-up drum and moves it into the horizontal position by lowering the fork. Thanks to the automatic locking mechanism the drum can then be stored in the horizontal position, e.g. in a drum shelf (cat.-no ) Dimensions L x W x H load capacity Finish 5620 max. kg 1700 x 1025 x RAL 2000 yellow orange Drum bracket Manual operation. With attachment eye for load hooks, gripper arms with claw, handle. For standing-up drum storage of closed 200-litre drums Load capacity for drum Ø Finish 5621 max. kg RAL 2000 yellow orange Drum gripper Manual operation. With rack for load hooks, locking mechanism with hand lever. For lie-down drum storage of 200-litre drums. Load capacity mount length Finish 5622 max. kg RAL 2000 yellow orange Cabinet for chemicals and toxic substances with safety box (empty) 5622 One-walled. Housing made of high-quality sheet steel with high-quality powder-coating RAL 7035 light grey. Doors lockable by means of centralised cylinder lock, air vents in doors. Waste-air connection by means of pipe connection DN 75 on top. Insert trays secured against tilting, adjustable in height, grid pattern 25. Volume 20 litres per tray. Incl. of accessories: sheet steel powder-coated RAL 7035 light grey, with safety box and 3 trays. Safety box: Flame-proof longer than 30 minutes, 2 self-closing swing doors, floor tray sheet steel powder-coated with 11 litres of volume, waste-air connection DN 75 by means of air duct on top. For storing water polluting materials and small amounts of flaable liquids at the workplace. Waste-air fan see cat.-no External dimensions W x D x H x 500 x

21 ß Safety cabinets/cabinets for dangerous materials in compliance with EN (type 90) (empty) Tested and approved (approved institute for material testing) design in compliance with EN (type 90) with flame resistance for more than 90 minutes. GS-tested. Insulation in compliance with DIN Housing sheet steel, powder-coating RAL 7035 light grey. Inner made of HPL-coated plates RAL 7035 light grey. Floor banding made of stainless steel, Niro. Shelves adjustable in height, grid pattern 64. Self-closing in case of fire thanks to thermo-mechanical device. - doors at a temperature of 50 C and - supply and exhaust ducts at a temperature of 70 C ( +/- 10 C). Pipe connection DN 75 for aeration. Operation in compliance with TRbF 20-L (also approved for operation without exhaust air!). Earth connection in compliance with BGR 132 (prevention of ignition sources). Marking in compliance with EN / TRbF 20, appendix L / ISO 364. Incl. of accessories: sheet steel powder-coated RAL 7035 light grey, 1 floor tray (volume 33 litres), 1 cover made of perforated panel functions as first shelf, 3 x shelves. Approved for storing bearing flaable liquids at the workplace in compliance with EN (type 90) and TRbF 2-L. Waste-air fan see cat.-no External dimensions W x D x H Finish doors 595 x 59 x 1935 RAL 1007 daffodil yellow x 59 x 1935 RAL 7035 light grey x 59 x 1935 RAL 1007 daffodil yellow x 59 x 1935 RAL 7035 light grey Waste-air fan for safety cabinets Ready-to-use plug-on top for technical ventilation 230 V (earthed plug) without explosion-proof rating. Incl. of assembly plate for easy mounting on the top. For secure dust extraction of explosive and harmful vapours Special Cabinets (Empty) The tray floors which are adjustable in height are leakproof welded in compliance with WHG (Federal Water Act) 19-1 and have a load capacity of up to 100 kg. Should there be a leakage, the trays can be removed to the front. Powder-coating: Housing RAL 7035 light grey, doors RAL 5012 light blue. Safety features: - leakproof welded in compliance with WHG TÜV / GS tested - made in Germany in compliance with DQS standard - 5-year warranty With respect to the handling of water-polluting materials, there are several acts and directives whose object is to ensure that no toxic or hazardous substances pollute the ground water. This is why the environmental cabinets were invented Picture partly shows special finishes. Available on request. Dimensions H x W x D Number of trays Volume 5601 litre/tray 900 x 500 x x 1000 x x 500 x x 1000 x

22 Workshop Trolleys/Metal Chip Trolleys Collecting containers Waste Bins 552 Workshop Trolleys/Metal Chip Trolleys Running gear made of sheet steel with rounded edges. Sheet metal case oil-tight welded construction. Container edge double rounded. Grap locking. Tilting function forward via axis or wheel. Wheels positioned underneath the container. Wheel size: 200 Ø, solid rubber tyres, roller bearings. Finish: RAL 5021, water blue Workshop trolley Without drain cock and hole sheet panel Metal chip trolley With lifting section, hole sheet panel and drain cock Contents external dimensions L x W x H Weight 552 Litres approx. kg Workshop trolley x 50 x Metal chip trolley x 670 x Metal chip trolley x 790 x Collecting Containers With galvanised inner container, liquid-tight in floor area. Self-closing throw-in flap, fire-retardant and odour-retardant. Top removable. Powder-coated. Without stickers. Sticker see cat.-no Dimensions H x W x D Capacity Finish 554 litre 960 x 400 x RAL 3000 flame red x 400 x RAL 7035 light grey x 400 x RAL 6024 traffic green x 400 x RAL 5012 light blue x 400 x RAL 1003 signal yellow Trolley for Four Collecting Containers Base frame made of solid, hot-galvanised, greycoated frame. With 2 fixed rollers and 2 steering wheels, steering wheels with stop lock. Collecting containers not included. Collecting containers see cat.-no Figure shows Collecting Containers for Recyclable Materials Made of high-quality sheet steel with removable top and self-closing lid. The extra long top secures the rubbish bag and at the same time covers ugly edges of the bag. Safety features: TÜV / GS inspecting, fire-retardant and odour-retardant, 5-year warranty. Without stickers. Sticker see cat.-no Dimensions H x W x D Capacity Finish 555 litre 640 x 320 x RAL 3000 flame red x 320 x RAL 7035 light grey x 320 x RAL 6024 traffic green x 320 x RAL 5012 light blue x 320 x RAL 1003 signal yellow Stickers for Collecting Containers Self-adhesive plastics, waterproof, print in black/white Symbol stickers Dimensions: 160 x Writing stickers Dimensions: 300 x Symbols Writing Definitions Sticker glass plastics metal paper organic waste non-recyclable waste

23 ß 557 Waste Bins Made of sheet steel, folding carrying handles on two sides, with self-closing throw-in flaps on two opposite sides. Powder-coating: RAL 7001 silver grey, textured. For industrial usage as waste bin and cleaning wool box Top removable, with additional insert made of galvanised sheet steel With frontside retractable drawer. Drawer with additional handle. 557 Volume H x W x D 557 approx. litre /70 x 450 x /70 x 450 x Safety Waste Bin/Ashtray Combinations Container made of sheet steel powder-coated, tilting up to 10, this makes it easy to empty. Rubbish bins with large opening. Opening with edge protection. Galvanised safety ashtray. The ashtray part is removable. The special design of the lid prevents a permanent entry of oxygen which in turn extinguishes fires and embers. As safety ashtray (upper part) and rubbish bin (lower part). For use indoors and canopied outdoor areas Wall-mounted model Incl. of fastening material Standing model With stand made of steel square tube, height 25. Cylindrical lower part, Ø The stand is available as an accessory. Also available with stainless steel cover. Model Overall height Ø volumes colour 541 approx. litre Wall-mounted white 101 Standing white Safety Wall-Mounted Ashtray Safe and environmentally friendly, automatically glow-extinguishing. Stable thanks to deep-drawn construction. Flame-retardant thanks to special lid design, easy emptying thanks to tilting mechanism, robust, theft-proof, easy to clean and aesthetical design. Container Ø height volumes colour 542 approx. approx. approx. l ,4 red Waste Collector Waste Collector Made of tubular steel with four stands. PVC lid and clamping ring, opening Ø Plastic waste bags Made of polyethylene. Pack= 250 pcs H x W x D Weight Contents colour kg litre 960 x 500 x x 700 x 0, blue x 700 x 0, red

24 Working Platform Safety ladders Ladders 564 Working Platform Norm EN 131 and BGV D 36 P Can be used from both sides, 5 deep steps with non-slip corrugation. Great stability thanks to platform with integrated hinges, and rigid connections on both sides. Extra wide steps. 10-year warranty. 564 Ladder length Platform height Number of rungs Outer width bottom Weight m m m approx. kg 0,75 0,7 2 x 3 0, Safety ladders standard EN 131, foldable P Especially compact dimensions when folded, therefore very easy to store or transport. Sturdy steps 205 x 360 made of light metal for a secure and comfortable stand with corrugated aluminium surface. Sturdy stand thanks to compression-proof reinforcements and non-slip ladder shoes Without frame With safety frame and tray for small parts and tools, supporting part with wheels. 566 Working height Platform height Lower, outer Number of rung Weight 566 type max. approx. m m width incl. of platform kg without frame 2,45 0,44 0,55 2 4,7 201 without frame 2,65 0,66 0,57 3 7,0 202 with frame 2,65 0,66 0,57 3,5 301 with frame 2,90 0, 0, , Step ladder standard EN 131, can be used from both sides P Connection between steps and beams high-strength ZARGES high-quality flaring. 0 deep step and beams made of aluminium extrusion-moulded profiles. Hinges made of die-cast aluminium. Exchangeable 2-component plastic shoes for a nonslip stand and, at the same time, for secure fit in the beam. Spread safety device by means of very tight perlon straps. Beams and steps made of aluminium, colour natural. Safer Step Technology. 560 Ladder length Working height Lower, outer Beam height Number of Weight 560 m approx. m width m step kg 0,5 2,50 0, x 3 5, ,13 2,0 0, x 4 6, ,41 3,05 0, x 5, ,69 3,35 0, x 6, ,97 3,65 0, x 7 9, ,25 3,90 0, x 10, ,5 4,45 0,6 6 2 x 10 14, ,45 5,05 0,0 6 2 x 12 16, Step ladder standard EN 131 P Connection between steps and beams high-strength ZARGES high-quality flaring. 0 deep step and beams made of aluminium extrusion-moulded profiles. Convenient tray made of aluminium for small parts and tools. Standing platform made of aluminium extrusion-moulded profiles for a secure and comfortable stand. Exchangeable 2-component plastic shoes for a non-slip stand and, at the same time, for secure fit in the beam. Spread safety device by means of very tight perlon straps. Beams and steps made of aluminium, colour natural. Safer Step Technology. 557 Ladder length Working height Platform height Beam height Number of rungs Weight 557 m approx. m m mounting part/supporting part incl. of platform kg 1,44 2,75 0,76 6 / 4 3 7, ,72 3,00 1,02 6 / 4 4, ,00 3,30 1,29 6 / 4 5 9, ,2 3,55 1,55 6 / , ,56 3,0 1,1 6 / , ,4 4,10 2,0 6 / 4 11, ,40 4,60 2,59 6 / ,

25 ß 562 Step ladders standard EN sturdy beam profiles - Connection between rungs and beams durable 4-fold flaring - corrugated square rungs 30 x 30 - non-slip nivello ladder shoes 562 Ladder length Working height Ladder width Number of 562 approx. m up to approx. m rungs 2,20 3, ,50 3, ,00 4, ,60 4, ,20 5, ,70 5, Multi-Purpose Ladder Norm EN 131 and BGV D 36 P Multi-purpose ladder with 6 robust automatic steel hinges. Robust rectangular beams with flanged, fully corrugated square steps 30 x year warranty. Can be used as stand ladder, wall ladder with and without wall support or as handy working platform. Stability and secure stand thanks to two cross tubes with non-slip ladder shoes. Safe transport and easy storage thanks to low packing size. Max. loading within all permitted working positions: 150 kg. 563 Ladder length as Working height Number of Rungs height as working platform Weight 563 stand/wall ladder m m steps m approx. kg 3,62 / 1,76 4,75 4 x 3 0,99 12, Multi-purpose ladders standard EN 131, 3-part P Upper ladder with plug-in hooks and lift lock. Spread safety device by means of very tight perlon straps with sewn-in mounting lugs. Sturdy, bolted connecting parts made of extrusion-moulded profiles. Connection between rungs and beams high-strength ZARGES high-quality flaring. Exchangeable 2-component plastic shoes for a non-slip stand and, at the same time, for secure fit in the beam. 555 Length extended m Length m (as 2-part wall ladder and Length of ladder parts m Number of Beam height Transverse traverse Weight 555 (as 3-part wall ladder) as stand ladder with attachment part) (also stand ladder without attachment part) rungs m kg 5,0 4,10 2,45 3 x 73 0,0 1, ,90 4,95 3,00 3 x ,90 24,3 202,60 6,10 3,55 3 x ,00 30,

26 Ladders Platform ladders Stairs Platform stairs 556 Step stand ladders standard EN 131, can be used from both sides - robust square beams - corrugated square rungs 30 x 30 - beams with durable 4-fold flaring - conical beam guiding for a secure stand - lower beam ends with non-slip nivello ladder shoes - upper beam ends with end caps - spread safety device by means of high-strength straps - transport security device - solid, galvanised screwed steel hinges 556 Ladder length Working height Number of 556 approx. m approx. m rungs 1,50 2,60 2 x ,3 2,90 2 x ,10 3,20 2 x ,40 3,50 2 x 205 2,70 3,0 2 x ,95 4,00 2 x ,51 4,60 2 x ,07 5,10 2 x ,63 5,70 2 x Mobile platform ladders standard EN 131, foldable P Connection between steps and beams high-strength ZARGES high-quality flaring. Large tray. Non-slip aluminium working platform, approx. 600 x 630, with safety railing on three sides. Mounting part with transverse traverse, supporting part with basic beam, rollers with stop lock (Ø 160 ). Thanks to the hinges in both diagonal struts, this ladder can easily be folded and stored. Exchangeable 2-component plastic shoes. Safer Step Technology. 572 Platform height Height incl. of railing Number of rungs Overhang Basic beam Transverse traverse Weight 572 m approx. m incl. of platform m width m width m kg 1,00 2,00 4 1,25 1,09-32, ,30 2,30 5 1,40 1,09-33, ,60 2,60 6 1,50 1,29 1,00 36, ,0 2,0 7 1,65 1,29 1,00 39, ,10 3,10 1,0 1,69 1,00 45, ,60 3, ,10 1, 1,40 51, ,10 4, ,40 1, 1,0 55, Aluminium stairs standard EN 131, firm - sturdy, welded pipe design - steps made of aluminium chequered plate - beam ends with non-slip plastic shoes 569 Working height Platform height Number of Upper platform 569 approx. m approx. m steps 2,20 0, x ,40 0, x ,60 0, x ,0 0, x ,00 1, x

27 ß 573 Mobile platform stairs standard EN 131, can be used from one side P Light metal steps, depth 200, inclination 60. In accordance with BGV D 36 and BGI Distance between steps 240. Plastic shoes at the beam ends. Large platform 600 x 00. Railing height 1,00 m inclusive of foot and knee rails. Maximum load 150 kg. Four spring-loaded steering wheels Ø We recoend a railing for the mounting side. Railing see cat.-no A railing for the mounting side is required. Railing see cat.-no A railing for the mounting side is required. Railing see cat.-no Height Base area Number of rungs Weight 573 without railing m m incl. of platform kg 0,72 0,1 x 1, , ,96 0, x 1, , ,20 0,95 x 1, , ,44 1,02 x 1,2 6 40, ,6 1,09 x 2, , ,92 1,16 x 2,1 47, Mobile platform stairs standard EN 131, can be used from both sides P Light metal steps, depth 200, inclination 60. In accordance with BGV D 36 and BGI Distance between steps 240. Plastic shoes at the beam ends. Large platform 600 x 00. Railing height 1,00 m inclusive of foot and knee rails. Maximum load 150 kg. Four spring-loaded steering wheels Ø We recoend a railing for the mounting side. Railing see cat.-no A railing for the mounting side is required. Railing see cat.-no A railing for the mounting side is required. Railing see cat.-no Height Base area Number of rungs Weight 574 without railing m m incl. of platform kg 0,72 0,1 x 1, , ,96 0, x 1,0 4 37, ,20 0,95 x 2, , ,44 1,02 x 2, , ,6 1,09 x 2, , ,92 1,16 x 2,91 61, Railing at the mounting side in accordance with EN 131 for platform stairs P For platform stairs cat.-no and For platform stairs cat.-no and

28 Scaffolding Tool cases 570 Folding scaffolding standard EN 1004 P Handy small scaffolding, easy to handle. Foldable for quick and easy use. Minimum space requirements for transport and storage (dimensions folded only 0,25 x 0,75 x 1,50 m). Fits through doors even when unfolded. Scaffolding group 3 (load capacity 200 kg/m 2 ) in compliance with the new DIN EN For low-height projects inside and outside. 570 The folding scaffolding can be extended to a working height of 13,65 m. Size of scaffolding Load capacity Working height Height of scaffolding Platform height Weight 570 m kg approx. m m m approx. kg 0,75 x 1, ,95 1,65 0,95 35, 201 1,35 x 1,0 46 2,95 1,65 0,95 52, Rolling scaffolding with basic beam standard EN GS-tested in compliance with DIN EN sturdy and safe - functional in use and comfortable to handle - platform with large hatch - robust design, modular system - made of aluminium - steering wheel Ø 125 with stop lock Without basic beam, not required. The wheels are plugged directly into the lower frame. Scaffolding height Scaffolding size Scaffolding group 577 approx. m approx. m III 3,20 1,0 x 0,75 2,00 kn/m ,20 1,0 x 0,75 2,00 kn/m ,20 1,0 x 0,75 2,00 kn/m ,20 1,0 x 0,75 2,00 kn/m Everything from one source. We customize your workshop using CAD technology. Need some advice? Contact us: betriebseinrichtung@hhw.de 5.2