Workspace and storage furnishings

Size: px

Start display at page:

Download "Workspace and storage furnishings"

Florence Reed
5 years ago
Views:

1 LISTA Compact Workspace and storage furnishings

Universal superstructures Utmost stability load capacities up to 10 kg Tremendous design diversity through a wide range of add-on elements including power supply and lighting Fully modular through

2 Universal superstructures Utmost stability load capacities up to 10 kg Tremendous design diversity through a wide range of add-on elements including power supply and lighting Fully modular through standardised dimensions for all LISTA workbench and workstation systems, customisable configuration options in terms of height and freely positionable superstructure widths Easy assembly on workbench tops, workbench substructures and individual workstations with support pillars perforated on four sides so that add-on elements can be attached largely without the use of screws With the modular LISTA superstructure system, entire working environments can be planned, assembled and perfectly coordinated in every detail. On the basis of support pillars perforated on four sides, the system offers you a wide range of add-on elements such as container strips, adjustable shelves, etc. It is also very easy to integrate power supply and lighting so that you always have an ergonomic and scaleable solution that is suited to the requirements of the individual workstation and which makes workflows in the workshop and production department even more efficient. 98

Wide range of add-on elements 6 9 7 3 1 4 1 Container strips for attaching storage containers and TFT monitors, horizontally or adjustable up to

bar on one side, for mounting to the front or rear 3 Rear panels either plain or with square and slotted perforations for tool holders and rear

an angle of 30 by means of a clamping lever Swivel arms for holding TFT monitors and module frames for fitting with any desired components 6

configurable power conduits can be attached as desired to one or both sides of the worktop or to the support pillar superstructure 8

the workbench top or on the crossbars of the individual workstations Add-ons can mostly be attached without the need for tools n horizontal or

individually on both sides with fuses, switches, sockets, emergency stop buttons, a network or built-in compressed air installations n globally

flush with the worktop, flush with the support pillar superstructure or in front of the support pillar superstructure Energy-efficient

3 Wide range of add-on elements Container strips for attaching storage containers and TFT monitors, horizontally or adjustable up to an angle of inclination of 1 Adjustable shelves load capacity up to 0 kg, can be attached and adjusted horizontally or at a 1 angle, with a stop bar on one side, for mounting to the front or rear 3 Rear panels either plain or with square and slotted perforations for tool holders and rear panel equipment such as can holders or storage shelves 4 Swivel shelves load capacity up to 0 kg, can be infinitely adjusted from horizontal to an angle of 30 by means of a clamping lever Swivel arms for holding TFT monitors and module frames for fitting with any desired components 6 Component rails for tool trolley load capacity up to 1 kg, depth adjustable and for use across the entire width of the table 7 Freely configurable power conduits can be attached as desired to one or both sides of the worktop or to the support pillar superstructure 8 Preconfigured power and compressed air strips for mounting on the side of the support pillar 9 Energy efficient and glare-free workplace lighting can be mounted on the bracket or on the lamp fixing profile 8 Easy assembly right Centre left Individual workstation Support pillars as a base n box section steel perforated on four sides so that add-on elements can be attached n available in various standard lengths n can be mounted on the workbench top or on the crossbars of the individual workstations Add-ons can mostly be attached without the need for tools n horizontal or tilted at an angle of up to 1 n in increments of 0 Power supply and lighting Power conduits with freely selectable power modules n can be fitted individually on both sides with fuses, switches, sockets, emergency stop buttons, a network or built-in compressed air installations n globally approved n retrofitting or refitting with standardised plug and socket connections is possible at any time n components can be mounted either flush with the worktop, flush with the support pillar superstructure or in front of the support pillar superstructure Energy-efficient workstation lighting n in aluminium housing with front on/off switch and rear system plug and socket for interconnecting lights with one another n provides optimum workstation lighting

4 Universal superstructures The system concept The LISTA superstructure system is based on a support pillar perforated on four sides which is mounted either on the surface of the worktop or on the table substructure. This enables a variety of different superstructure widths to be freely positioned and combined with one another. The individual components such as adjustable shelves, swivel arms, etc. can now be attached to the support pillars mostly without the need for tools and freely combined with one another. And this goes for every LISTA substructure from the workbench to the assembly trolley. Superstructures on workbenches Superstructures on compact workbenches Superstructures on system workbenches Superstructures on assembly trolleys Superstructures on individual workstations Superstructures on team workstations

5 Planning information for superstructures for workbenches, compact and system workbenches to 100 W Worktop width Superstructures with support pillars on worktop 1 load capacity up to 100 kg D A Module width of superstructures E M D Detail A E A Standard Detail A Rear view: Support pillar 30 1 Number of support pillars with standard D M E 1000* x ** x x x x 100, 1 x x * Worktop width available only for compact workbenches. possible - not possible ** Worktop width available only for system workbenches. 1 Only suitable for mounting on workbench tops made from beechwood and Multiplex. H Nom. width Pillar height Workbench Compact workbench System workbench *** A *** must be stabilised by supporting bracket. Planning information for superstructures for individual workstations E M E M E to 10 Module widths of individual workstations Support pillars generally on the substructure, load capacity up to 10 kg M 700 D B A Worktop width Frame width Module width of superstructures Max. installation width for superstructures D B M E x x 66, 1 x Standard Number of support pillars with standard Height of support pillars from the upper edge of the table top 38 or 108. possible - not possible

Universal superstructures I support pillars and lighting Support pillars for mounting onto workbench tops The support pillars are available in three different heights and must be

XXX 89.40.XXX 89.44.XXX 700 89.4.XXX 89.41.XXX 89.46.XXX 1400* 89.47.XXX 89.4.XXX 89.48.XXX * When loaded to capacity, a support bracket is mandatory (see below).

Specification: sheet steel. Colour: as per colour chart. Specification Left Right 89.433.XXX 89.434.

fastening material provided. Load capacity 10 kg.

With double workstations, the same support pillars are used for both sides. Colour: as per colour chart.

6 Universal superstructures I support pillars and lighting Support pillars for mounting onto workbench tops The support pillars are available in three different heights and must be screwed directly onto the top surface (by the customer) using the fastening material provided. Load capacity 100 kg. Fastening material included. Specification: Steel profile, perforated on four sides in increments of 0, for attaching the superstructure components with minimum use of screws. Colour: as per colour chart. Minimum Top thickness 40. Only suitable for mounting on workbench tops made from beechwood and Multiplex. Mounting position on worktop Left Centre Right H Pillar height XXX XXX XXX XXX XXX XXX 1400* XXX 89.4.XXX XXX * When loaded to capacity, a support bracket is mandatory (see below). Support bracket for support pillar on worktop To provide additional stability for the support pillars on the workbench top. For pillar heights of 1400 absolutely essential. Specification: sheet steel. Colour: as per colour chart. Specification Left Right XXX XXX Support pillars for mounting onto single workstations The support pillars are available in two different heights and are mounted onto the crossbars of the frame using the fastening material provided. Load capacity 10 kg. Specification: Steel profile, perforated on four sides in increments of 0, for attaching the superstructure components with minimum use of screws. With double workstations, the same support pillars are used for both sides. Colour: as per colour chart. H Height of support pillars from the upper edge of the table top Nominal height XXX XXX Support pillars for wall mounting For mounting rear panels, adjustable shelves and container strips directly to the wall. Fastening material included. Specification: Steel U-profile, increments of 0, sinkhole for wall mounting every 00 on concrete wall (nylon wall plugs No. 8 and countersunk screw x 70). Colour: as per colour chart. Swivel shelves cannot be attached to wall-mounted rails. Width Depth H XXX XXX XXX

Mounting onto the brackets (hook-in set and carriage not included). Load capacity 1 kg. Specification: Steel structure. Colour: as per colour chart. Rail length Depth Height 100 30 30 89.446.

Specification: bright galvanised finish. Description Suspension set, 1 unit 89.449.000 Carriage for component rails Carriage for accoodating cable winches and tools.

7 Bracket for support pillar For fastening to the support pillar profile. For accoodating component rails and fixing profiles for lighting. Fastening material included. Load capacity 1 kg. Specification: Steel structure. Colour: as per colour chart. Specification Depth Height Depth Height Bracket and profile tube as a set XXX Component rails For supporting the carriage. Mounting onto the brackets (hook-in set and carriage not included). Load capacity 1 kg. Specification: Steel structure. Colour: as per colour chart. Rail length Depth Height XXX XXX Without hook-in set and carriage; these must be ordered additionally. Component rail suspension set Suspension set for fixing the component rail to the brackets. Specification: bright galvanised finish. Description Suspension set, 1 unit Carriage for component rails Carriage for accoodating cable winches and tools. With four high-quality ball bearings including two end stops for restricting the travel path. Load capacity kg. Screw fixtures included. Specification: Steel structure, bright galvanised finish. Description Carriage including two end stops for restricting the travel path Fixing profiles for lighting The fixing profile is fixed between the brackets. Consisting of the fixing profile and the fixing material set. Depth 1. Specification: Sheet steel construction. Colour: as per colour chart. For workplace lamp Module width Profile length Convenience 63 Convenience 970/1300 Convenience 970/ Basic XXX XXX XXX Convenience workstation lamp The workstation lamp can be mounted onto the bracket or the lamp fixing profile. Housing made of anodised aluminium, with profile groove at the top and anti-glare grid inserted. With on/off switch on the front, power input/output socket at the rear. Lighting: x 36 Watt/30 Volt/0 Hz. Specification: Anodised aluminium. Without power cables or connecting cables (see p. 107). For module width Length Lighting W x x x Basic workstation lamp The workstation lamp can be mounted onto the bracket or the lamp fixing profile. Self-supporting, with reflector, connection via system plug, lighting: 1 x 49 Watt. Specification: sheet steel. Paint: pure white, RAL For module width Length Lighting W all* x * For module width 000, a fixing profile is mandatory (see above) For colour information see fold-out page. When ordering, please use the desired three-digit colour code (instead of XXX). 103

Universal superstructures I shelves and swivel elements Perforated rear panels The support pillars can be vertically

All rear panels can be attached to the support pillars without screws.

can holders (see p. 10). Specification: sheet steel. Colour: as per colour chart.

XXX Container strips To hold size, 3 and 4 storage containers; can be attached to the support pillars without screws.

XXX Container size 3 4 Number of containers 6-1 6 4 Adjustable shelves, plain or slotted The adjustable shelves are

The adjustable shelves can be attached with the stop bar on either the front or the rear.

Using two brackets, the adjustable shelves are attached to the support pillars without screws, either horizontally or

Specification: sheet steel. Colour: as per colour chart. Usable width 664 D Specification 300 plain 6.8.XXX 30 plain 89.

XXX Swivel arm attachments For accoodating the swivel arm elements directly on the table frame (individual workstation)

Fixing to Width Height Depth Table frame Support pillar 30 80 30 6.44.000 30 10 13 6.346.

The swivel arm add-ons are fitted with internal slide bearings. The swivel radius is 300. Specification: steel.

347.000 Module frames for swivel arm Welded steel tube frame with perforations on four sides.

8 Universal superstructures I shelves and swivel elements Perforated rear panels The support pillars can be vertically fitted with rear panels, either partially or up to their full height. All rear panels can be attached to the support pillars without screws. Rear panels perforated with square holes 10 x 10, 38 division and slots 380 apart for accoodating storage shelves and can holders (see p. 10). Specification: sheet steel. Colour: as per colour chart. W for module width Usable width 66 6 H Specification 30 perforated XXX Container strips To hold size, 3 and 4 storage containers; can be attached to the support pillars without screws. Max. load capacity 1 kg. Specification: sheet steel. Colour: as per colour chart. Usable width 660 H XXX Container size 3 4 Number of containers Adjustable shelves, plain or slotted The adjustable shelves are fitted with a stop bar on one of their longitudinal sides. The adjustable shelves can be attached with the stop bar on either the front or the rear. For adjustable shelves, slotted: slots 1 apart for partitioning with dividers. Using two brackets, the adjustable shelves are attached to the support pillars without screws, either horizontally or with an inclination angle of 1. Load capacity 0 kg. Normal level + 17 stop bar. Including two brackets each. Specification: sheet steel. Colour: as per colour chart. Usable width 664 D Specification 300 plain 6.8.XXX 30 plain XXX 300 slotted 89.8.XXX 30 slotted XXX Swivel arm attachments For accoodating the swivel arm elements directly on the table frame (individual workstation) or on the support pillar. Table frame holder galvanised. Specification: steel. Colour: light grey, RAL 703. Fixing to Width Height Depth Table frame Support pillar Swivel arm Double-jointed swivel arms with 1 axis and 1 swivel arm add-on. The swivel arm add-ons are fitted with internal slide bearings. The swivel radius is 300. Specification: steel. Colour: light grey, RAL 703. Without swivel arm fixing device. Specification Length Double-jointed swivel arm x Module frames for swivel arm Welded steel tube frame with perforations on four sides. Perforations at 0 increments, with steel axis for fixing onto the swivel arm. Load capacity kg. Specification: sheet steel. Colour: light grey, RAL 703. Version with Width Height Depth 1 rear panel adjustable shelves* swivel shelves 3 container strips * Depth of adjustable shelf 00. Swivel shelves for swivel arm Swivel shelves for swivel arm, with steel axis for fixing onto the swivel arm add-on, with stop bar on both sides. Tilt angle can be infinitely adjusted by up to 30. Specification: sheet steel. Colour: light grey, RAL 703. Width Depth Height

70 1000 1330 100 000 740 990 130 1490 1990 89.391.XXX 89.39.XXX 74 99 89.393.XXX 89.39.XXX 149 6.08.XXX 89.394.XXX 13 89.460.XXX 199 6.3.XXX 89.461.

XXX 89.844.XXX 89.90.XXX 89.903.XXX 89.846.XXX 89.847.XXX 89.848.XXX 89.904.XXX 89.90.XXX 89.83.XXX 89.84.XXX 89.8.XXX 89.906.XXX 89.907.XXX 89.87.

11/113 Add-ons for perforated rear panels Can be hooked into the slots on the rear panels. Storage shelf with stop bar at the front, 1.

000 Specification Dividers For subdividing slotted adjustable shelves. Specification: sheet steel. Colour: similar to light grey, RAL 703.

43.000 30 338 00 19 100.44.000 TFT monitor mount For accoodating flat screens with a VESA base plate.

Depth Height Depth Swivel arm Specification for 10 1 60 6.36.000 Container strip 10 1 60 6.17.

9 XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX 6.13.XXX 6.64.XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX 89.8.XXX XXX XXX XXX XXX XXX For keyhole hooks and storage containers see p. 11/113 Add-ons for perforated rear panels Can be hooked into the slots on the rear panels. Storage shelf with stop bar at the front, 1. Colour: black, NCS S 9000-N. Width Depth Height Storage shelf Can holder Specification Dividers For subdividing slotted adjustable shelves. Specification: sheet steel. Colour: similar to light grey, RAL 703. Depth Usable depth Nominal height Usable height TFT monitor mount For accoodating flat screens with a VESA base plate. Hole pattern 7 x 7 and 100 x 100, infinitely adjustable tilt angle. Specification: sheet steel. Colour: light grey, RAL 703. Depth Height Depth Swivel arm Specification for Container strip Keyboard support for TFT monitor mount For mounting onto the monitor mount for swivel arm. Specification: sheet steel. Colour: light grey, RAL 703. Specification Keyboard support 01 Width Depth Height For colour information see fold-out page. When ordering, please use the desired three-digit colour code (instead of XXX). 10

Universal superstructures I power supply W for module width Nom.

plate on the front (module types see right).

fastening material set and connecting cables Type CH D F GB 1 89.3.XXX 89.9.XXX 89.6.XXX 89.71.

10 Universal superstructures I power supply W for module width Nom. width (94) Preconfigured power conduits Consisting of the basic frame and the fitted cover plate on the front (module types see right). The power conduits are fitted with another cover plate at the rear. Specification: sheet steel. Colour: as per colour chart. + Fastening material set and supply cables (see below) Power conduits, preconfigured without fastening material set and connecting cables Type CH D F GB XXX 89.9.XXX 89.6.XXX XXX Fastening sets For mounting the power conduits. One pair for each set, including screw fittings. Specification: sheet steel. Colours: as per colour chart. For mounting on workbench top between the support pillars attached to front of support pillars XXX 89.0.XXX 106

70 1000 1330 100 000 684 (679) 934 (99) 164 (19) 1434 (71/71) 1934 (71/00/71) 1 1 1 1 1 89.4.XXX 89..XXX 89.6.XXX 89.7.XXX 89.8.XXX 89.60.XXX 89.61.XXX 89.6.XXX 89.63.XXX 89.64.XXX 89.66.XXX 89.67.XXX 89.68.XXX 89.69.

XXX 89.7.XXX 89.73.XXX 89.74.XXX 89.7.XXX 89.76.XXX 89.49.00

11 (679) 934 (99) 164 (19) 1434 (71/71) 1934 (71/00/71) XXX 89..XXX 89.6.XXX 89.7.XXX 89.8.XXX XXX XXX 89.6.XXX XXX XXX XXX XXX XXX XXX XXX 89.7.XXX XXX XXX 89.7.XXX XXX XXX XXX XXX XXX 89.0.XXX 89.0.XXX 89.0.XXX 89.0.XXX 89.0.XXX Power module 1 x switch, 1 x 0 V socket outlet Blank cover Power module for subsequently accoodating power modules x 0 V socket outlet Power strip for support pillar Input/output via system connector and 3 0 V sockets. Including on/off switch. Without power and connection cables. Type Height CH F GB System socket supply cable Simple and quick electrical installation through plug and socket connector system, 3-pin Length Compressed air strip for support pillar Compressed air strip for support pillar, with compressed air boxes, inside diameter 7., and one coupling plug in the end cap. Including fastening material for support pillar. Specification: sheet steel. Colour: light grey, RAL 703. D Plug type XXX 1 Connections Width Depth Height x Compressed air Socket strip With on/off switch and 6 sockets, 0 V. Including angle bracket and mounting material for screwing onto the workbench top. Colour: Housing white, holder black. Type D 3, D 6-fold CH 3, CH 6-fold F 3, F 6-fold GB 3, GB 6-fold Specification 107

WELL ORGANISED. Workbenches ALWAYS WITH LISTA. Free choice of colours. Individual configuration options. Fully combinable. Intelligent locking systems

WELL ORGANISED. Workbenches ALWAYS WITH LISTA. Free choice of colours. Individual configuration options. Fully combinable. Intelligent locking systems Workbenches WELL ORGANISED Thanks to the wide range of combination options, each workstation can be individually equipped with LISTA workbenches to optimise space. The combinable workbench tops, drawers