MULTI-FORMA II Room for unlimited possibilities

Transcription

1 Link to the assembly / user instruction movies MULTFORMA Room for unlimited possibilities Contents Page Range introduction Hinge and foldingdoor wardrobes ntroduction hinge and foldingdoor wardrobes, Lists of versions Wardrobe examples hinge and foldingdoor wardrobes Basic and extension units hingedoor wardrobes Basic and extension units foldingdoor wardrobes Basic and extension units hingedoor corner wardrobes Accessories, Lamps, MagicTronic 176 ntermediate units nterior TV unit fittings for ntermediate units 183 Hinge, folding and slidingdoor wardrobes as well as a room system The modern, innovative MULTFORMA wardrobe system is suitable for individual arrange ments because it is particularly versatile. New front designs and unique intermediate units give MULTFORMA its particularly exclusive look. As a universal wardrobe system, the design of MULTFORMA enables you to combine its units with all of the units in the various hülsta Bedroom ranges and almost every type of interior style. To enhance the competency of the range, MULTFORMA now also includes a walkin room system which incorporates all the key performance features (planning, surface versions, special sizes, etc.) of the previous carcase system. Furthermore, this room/niche system also provides a separate system of fronts. n this way, small niche combinations and even magnanimous room systems can be created individually. The tried and tested planning system from MULTFORMA involving basic and extension units has been incorporated in the room/niche system. This guarantees a simple and comfortable initiation to the range including easy planning. Slidingdoor wardrobes ntroduction slidingdoor wardrobes, Lists of versions Slidingdoor wardrobes Accessories, Lamps 196 Room and niche system ntroduction room and niche system, lists of versions Room situations, technical notes on room and niche system Open carcasebasic and extension units Fronts sliding doors Lamps 206 Wall or ceiling fitting profile 207 Specialsized products mportant notes: Generally speaking, you as a dealer/qualified fitter are responsible for the correct wall mounting of the units. That is why wall mounting should only be carried out by properly trained and qualified fitters. hülsta supplies materials for mounting units on walls for nearly all the units and which should be used for safety and for constructional reasons. The assembly materials supplied by hülsta (plugs, screws) are only suitable for fitting components on to concrete in firmness class (C12/15). For other materials (please see separate materials table in the wall composition chapter) we provide you with an assembly mortar set as an extra order. Please note that this assembly mortar set is also only suitable for the materials listed in the materials table. f walls are made up of other materials (e.g. plastered or lighter wall materials), one should use another method of mounting better suited to the load on site. Please note that if the units are not mounted properly on the wall, there is a risk of the units falling down or tipping over especially when alternative mounting materials acquired on site have been used. For the reasons stated above it is absolutely essential to enquire about the composition of any walls before signing any contracts. 150 E Schlafen: MULTFORMA

2 MULTFORMA Hingedoor wardrobes and foldingdoor wardrobes Slidingdoor wardrobes Room system E Schlafen: MULTFORMA

3 Overview: Hinge, folding and slidingdoor wardrobes as well as room system System heights System widths and depth: see the separate chapters for hinge/ foldingdoor wardrobes, slidingdoor wardrobes or room system 229,6 cm high 268,0 cm high 337,8 cm high ntermediate units for hinge/ foldingdoor wardrobes Hingedoor wardrobes Foldingdoor wardrobes 229,6 cm high 268,0 cm high ,6 cm high 268,0 cm high Room system Slidingdoor wardrobes max. 268,0 / 273,0 cm high 152 E Schlafen: MULTFORMA

4 MULTFORMA Design and handle versions Wood/lacquer/highgloss versions Design versions for hinge/foldingdoor wardrobes Design A Design A plus with side fillets Design G Design G plus with side fillets Design L Design J Design F Design F plus with side fillets Handle versions for hinge/foldingdoors Handle 011 (standard handle) Handle 012 Handle 014/015 Handle 046/047 Handle 026/013 Handle 029/030 Handle 048/049 Handle 031 Design versions for slidingdoor wardrobes Design A Design M Design G Design L SOLST SOLST P Versions outer wardrobe carcase and fronts Pure white lacquer White lacquer Wool white lacquer Sand lacquer Grey lacquer Highgloss pure white Highgloss white Highgloss sand Highgloss grey Natural oak Dark stained oak * Light brown ash Core walnut * Version dark stained oak only available for slidingdoor wardrobes SOLST and SOLST P Handle versions for slidingdoors The various designs are available in different versions. See here the separate lists of versions for the hinge/foldingdoor wardrobes, slidingdoor wardrobes and for the room system. Design version for room system Design A Versions interior wardrobe carcase/ wardrobe fittings White lacquer (standard) Light interior veneer Dark interior veneer Handle version for room system E Schlafen: MULTFORMA

5 MULTFORMA Hinge and foldingdoor wardrobes The modern, innovative MULTFORMA wardrobe system is suitable for individual arrangements because it is particularly versatile. New front designs and unique intermediate units give MULTFORMA its particularly exclusive look. As a universal wardrobe system, the design of MULTFORMA enables you to combine its units with all of the units in the various hülsta Bedroom ranges and almost every type of interior style. Height reductions at intervals of 1 mm, width and depth reductions at intervals of 1.0 cm without surcharge ((Width reductions are not possible on doors with highgloss fronts in Design A, G, J and F)! Design idea You can choose from a variety of design versions for the MULTFORMA hinge and foldingdoor wardrobes: Design A Design A plus with side fillets Design G Design G plus with side fillets Design L Design J Design F Design F plus with side fillets The various wood/lacquer versions and highgloss versions (exclusively for fronts) and a number of different handle versions underline the versatility of the MULTFORMA wardrobe system. You can also choose from a variety of versions for the wardrobe interior fittings for the MULTFORMA hinge and foldingdoor wardrobes: White lacquer (Standard) Light interior veneer Dark interior veneer Please state exactly in the order, in which version you require the interior fittings for your wardrobe. f no details of the version are given in the order, the interior fittings are delivered in the standard white lacquer version. Concept/ planning possibilities Hinge and foldingdoor wardrobes according to the endless assembly principle Hinge and foldingdoor wardrobes and intermediate units can be combined with one another Optional with allround passepartout with top LED lamp (12 V; 2.4 W) with allround passepartout and top LED lamp (12 V; 2.4 W) with cornice and integrated LED spotlamps (12 V, 1 W) with cornice and integrated LEDlight panels (12 V; 2,7 W) The lights are operated by a standard external footswitch. Doors in Design A, A plus, J, F and F plus with an optional mirror (side facet) MULTFORMA comes in various widths: the great number of different unit widths means you can create total unit widths in 10 cm steps Wardrobe inside widths: 38, 48, 68, 78, 98, 158, 198 cm Different basic wardrobe heights: cm, cm and cm for the hingedoor wardrobes; cm and cm for the foldingdoor wardrobes mportant note: The wardrobe height of cm consists of a top wardrobe unit, standard 69.8 cm high, and of a lower wardrobe unit. The wardrobe sides and the fulllength hingedoors are split visually. n the case of height reductions, the lower wardrobe unit is always reduced in height. MULTFORMA is variable: height reductions at intervals of 1 mm, width and depth reductions at intervals of 1.0 cm without surcharge (width reductions are not possible on doors with highgloss fronts in Design A, G, J and F). Wardrobe outside depth (without handles): 61.6 cm Wardrobe inside depth: 56.0 cm Numerous intermediate units with different features for a more open look Extrawide panorama units (160 and 200 cm) without a centre partition keep things well organized Profiled hingedoor end units Hingedoor corner wardrobes (45 and fully accessible corner 90 ) Functional and highquality wardrobe interior fittings (see separate Wardrobe interior fittings chapter) Standard interior fittings : 2 fitted shelves, 1 clothes rod, for hingedoor wardrobes in cm height also with 1 fitted shelf in top wardrobe unit. Side and rear sloping possible (see Specialsized products chapter) Quality features All wardrobe doors with cushioning mechanism All wardrobe doors with handle and spring hinges nnovative door opening bracket (lies on wardrobe carcase, recedes out of view) Extrawide fitted wardrobe shelves (160 and 200 cm) of triple glued blockboard Unobtrusive 2.5 mm size holes Allmetal hinges Low plinth with trapezoidshaped brackets for simple assembly All partitions and side sections have a special plinth adjustment device which makes exact horizontal and vertical assembly much easier Drawer frames and drawer carcase of the intermediate units always in standard grey hülstasoftflow: Drawers of intermediate units on hidden bearings incl. auto pullin feature with brake as fully pullout units hülstamagicclose: All wooden hingedoors with door cushioning system 154 E Schlafen: MULTFORMA

6 Lists of versions for hinge and foldingdoor wardrobes MULTFORMA Design versions for wardrobe doors Design A Design A plus Design G Design G plus Design L Design J Design F Design F plus with side fillets with side fillets with side fillets With the MULTFORMA hinge and foldingdoor wardrobes and the intermediate units (only available in Design A) you can choose the carcase and the front in a different version. Please state this clearly in the order. When versions from different price groups are exchanged, the higher price group is always charged. Versions wardrobe interior fittings With the MULTFORMA hinge and foldingdoor wardrobes you can choose between three versions for the wardrobe interior fittings. (exception: wardrobe interior fittings for carcases in highgloss versions always in white lacquer). The desired version must be stated in the order. f no details are given in the order, the wardrobe interior fittings are supplied in white lacquer. Model no. Version White lacquer (standard) Light interior veneer Dark interior veneer Handle versions for hinge/foldingdoors Handle 011 (standard handle) Handle 012 Handle 014 / 015 Handle 046 / 047 Handle 026 / 013 Handle 029 / 030* ** Handle 048 / 049 ** Handle 031 ** NEW Handle height: 24.0 cm Handle height: 24.9 cm Handle height: 24.8 cm Handle height: 6.3 cm Handle height: cm Handle height: 77.0 cm Handle height: cm Handle height: cm matching version matching version Matt chrome 011 Matt chrome/ wood/lacquer version 012 Highgloss chrome 014 Matt chrome 015 Highgloss chrome 047 Matt chrome 046 Highgloss chrome 026 aluminium colour 013 Highgloss chrome 029 Matt chrome 030 Highgloss chrome 049 Matt chrome 048 Holz/ Lacquerausführung 031 without surcharge without surcharge without surcharge without surcharge Surcharge per handle: Surcharge per handle: Surcharge per handle: Surcharge per handle: With the MULTFORMA hinge and foldingdoor wardrobes you can choose between different handles. The desired handle and the desired wood/lacquer version for matching handles must always be stated in the order (handles for highgloss fronts are in matt lacquer in the matching colour). f no details of the handle are stated in the order, the standard handle 011 is supplied; exceptions: Design J always with handle slat, Design F und F plus always with standard formed wooden handle. * Handle 030 is the standard handle for Design G and G plus (handles 030 and 029 for Design G and G plus without surcharge). Handle 046/047 and 048/049 for Design G und G plus possible (without surcharge). ** Handle 029/030, 048/049 and 031 is not possible for Design L E Schlafen: MULTFORMA

7 Lists of versions for hinge and foldingdoor wardrobes Wood/lacquer/highgloss versions Design A Model no. Carcase/front Price group Handles Lacquer Highgloss Veneer D121 D01 D100 D02 D03 D05 D06 D07 D101 D102 D11 D12 Pure white lacquer White lacquer Wool white lacquer Sand lacquer Grey lacquer Highgloss pure white * Highgloss white * Highgloss sand * Highgloss grey * Natural oak Light brown ash Core walnut 011 (standard handle) 047 / / / / / * Wardrobe interior fittings for highgloss carcases always in white lacquer. Wood/lacquer/highgloss versions Design A plus with side fillets Model no. Carcase/front Price group Model no. Side fillets Handles Lacquer Highgloss Veneer D122 D61 D103 D62 D63 D65 D66 D67 D104 D105 D71 D72 Pure white lacquer White lacquer Wool white lacquer Sand lacquer Grey lacquer Highgloss pure white * Highgloss white * Highgloss sand * Highgloss grey * Natural oak Light brown ash Core walnut * Wardrobe interior fittings for highgloss carcases always in white lacquer. Wood/lacquer/highgloss versions Design G Lacquer Highgloss Veneer Model no. Carcase/front Price group D123 D14 D106 D15 D16 D18 D19 D20 D107 D108 D51 D52 Pure white lacquer White lacquer Wool white lacquer Sand lacquer Grey lacquer Highgloss pure white * Highgloss white * Highgloss sand * Highgloss grey * Natural oak Light brown ash Core walnut * Wardrobe interior fittings for highgloss carcases always in white lacquer. Wood/lacquer/highgloss versions Design G plus with side fillets Lacquer Highgloss Veneer Model no. Carcase/front Price group D124 D74 D109 D75 D76 D78 D79 D80 D110 D111 D84 D85 Pure white lacquer White lacquer Wool white lacquer Sand lacquer Grey lacquer Highgloss pure white * Highgloss white * Highgloss sand * Highgloss grey * Natural oak Light brown ash Core walnut Veneer Lacquer Veneer Lacquer Veneer Lacquer D60 D61 D103 D62 D63 D105 D71 D72 Model no. D123 D14 D106 D15 D16 D108 D51 D52 Model no. D124 D74 D109 D75 D76 D111 D84 D85 Pure white lacquer White lacquer Wool white lacquer Sand lacquer Grey lacquer Natural oak Light brown ash Core walnut Application Pure white lacquer White lacquer Wool white lacquer Sand lacquer Grey lacquer Natural oak Light brown ash Core walnut Application/ Side fillets Pure white lacquer White lacquer Wool white lacquer Sand lacquer Grey lacquer Natural oak Light brown ash Core walnut 011 (standard handle) 047 / / / / / Handles 030 (standard handle) / / 048 Handles 030 (standard handle) / / * Wardrobe interior fittings for highgloss carcases always in white lacquer. E Schlafen: MULTFORMA

8 Changing versions With the MULTFORMA hinge and foldingdoor wardrobes and the intermediate units (only available in Design A) you can choose the carcase and the front in a different version. Please state this clearly in the order. When versions from different price groups are exchanged, the higher price group is always charged. MULTFORMA Wood/lacquer/highgloss versions Design L Model no. Carcase/front Price group Model no. Application Handles Highgloss D26 D27 D28 D112 Highgloss pure white * Highgloss white * Highgloss sand * Highgloss grey * Lacquer Veneer D59 D22 D23 D24 D113 D32 D33 Pure white lacquer White lacquer Sand lacquer Grey lacquer Natural oak Light brown ash Core walnut 011 (standard handle) 047 / / / 013 * Wardrobe interior fittings for highgloss carcases always in white lacquer. The carcase is available in all the different versions (see e.g. Design G). Please state clearly in the order! Wood/lacquer/highgloss versions Design J Model no. Carcase/front Price group Model no. Profiled handle Handle slat Lacquer Highgloss Veneer * Wardrobe interior fittings for highgloss carcases always in white lacquer. Wood/lacquer/highgloss versions Design F Lacquer Highgloss D125 D126 D127 D128 D129 D130 D131 D132 D133 D134 D135 D136 Model no. Carcase/front Price group D138 D41 D115 D42 D43 D45 D46 D47 D116 Pure white lacquer White lacquer Wool white lacquer Sand lacquer Grey lacquer Highgloss pure white * Highgloss white * Highgloss sand * Highgloss grey * Natural oak * Light brown ash * Core walnut * Pure white lacquer White lacquer Wool white lacquer Sand lacquer Grey lacquer Highgloss pure white * Highgloss white * Highgloss sand * Highgloss grey * Lacquer Highgloss Veneer * The profiled handle for highgloss fronts is in matt lacquer in the matching colour ** The profiled handle for wooden fronts is standard aluminiumcoloured. Veneer D125 D126 D127 D128 D129 D125 D126 D128 D129 D137 Model no. D117 D56 D57 Pure white lacquer White lacquer Wool white lacquer Sand lacquer Grey lacquer Pure white lacquer * White lacquer * Sand lacquer * Grey lacquer * aluminium colour ** Application Natural oak Light brown ash Core walnut Formed wooden handle Veneer D117 D56 D57 Natural oak Light brown ash Core walnut * Wardrobe interior fittings for highgloss carcases always in white lacquer. Wood/lacquer/highgloss versions Design F plus with side fillets Model no. Carcase/front Price group Model no. Application/ side fillets Formed wooden handle Lacquer Highgloss D139 D87 D118 D88 D89 D91 D92 D93 D119 Pure white lacquer White lacquer Wool white lacquer Sand lacquer Grey lacquer Highgloss pure white * Highgloss white * Highgloss sand * Highgloss grey * Veneer D120 D97 D98 Natural oak Light brown ash Core walnut Veneer D120 D97 D98 * Wardrobe interior fittings for highgloss carcases always in white lacquer. E Schlafen: MULTFORMA Natural oak Light brown ash Core walnut 157

9 Hinge and foldingdoor wardrobes Wardrobes according to the endless assembly principle Hinge and foldingdoor wardrobes can be planned endlessly and combined with one another. Due to the various element widths one can create many total wardrobe widths. n this way the available floor space can be exploited to the full. For each wardrobe combination, the first element on the left is considered to be the basic unit, incorporating both outer sidesections. One can only include one basic unit in each combination. When adding on extension units, the righthand sidesection of the basic unit is employed as the end sidesection of the complete combination. n the case of singledoor hingedoor units as well as foldingdoor wardrobes one can choose between left and righthand hinges. The graphics shown below give you an excerpt of our wardrobe assortment. For a more varied look, we suggest using intermediate units for creating some alternatives. Standard interior fittings : 2 fitted shelves, 1 clothes rod, for hingedoor wardrobes in cm height also with one fitted shelf in the top wardrobe unit. Wardrobe interior fittings optionally in white lacquer (standard), light interior veneer or dark interior veneer (see here page 155). Please state in the order! Wardrobe examples for hingedoor wardrobes Hingedoor wardrobes can be combined with foldingdoor wardrobes and intermediate units Optionally available with many different handles (see page 155) Straight units and profiled end units Mirror fronts for doors in Design A, A plus, J, F and F plus at a surcharge Passepartout, cornice and lamps at a surcharge 3 different basic heights: 229.6; 268.0; cm Unit outside widths: 42, 52, 72, 82, 102 cm (basic units) 40, 50, 70, 80, 100 cm (extension units) Unit inside widths: 38, 48, 68, 78, 98 cm Outside depth: 61.6 cm nside depth: 56.0 cm Wardrobe examples for foldingdoor wardrobes Foldingdoor wardrobes can be combined with hingedoor wardrobes and intermediate units Optionally available with many different handles (see page 155) Extrawide panorama units in 160/162 and 200/202 cm width without partition Mirror fronts for doors in Design A, A plus, J, F and F plus at a surcharge Passepartout, cornice and lamps at a surcharge 2 different basic heights: 229,6; 268,0 cm Unit outside widths: 82, 102, 162, 202 cm (basic units) 80, 100, 160, 200 cm (extension units) Unit inside widths: 78, 98, 158, 198 cm Outside depth: 61.6 cm nside depth: 56.0 cm For calculating the total width when fitting a passepartout (or a cornice with lamp), please note the protrusion of 1.7 cm (or 0.5 cm) left and right! Hingedoor wardrobe in cm height For calculating the total width when fitting a passepartout (or a cornice with lamp), please note the protrusion of 1.7 cm (or 0.5 cm) left and right! Foldingdoor wardrobe in cm height Hingedoor wardrobe in cm height Foldingdoor wardrobe in cm height Hingedoor wardrobe in cm height mportant note: The hingedoor wardrobe height of cm consists of a top wardrobe unit, standard 69.8 cm high, and of a lower wardrobe unit. The wardrobe sides and the fulllength hingedoors are split visually. n the case of height reductions, the lower wardrobe unit is always reduced in height. Standard interior fittings : in lower wardrobe unit: 2 fitted shelves, 1 clothes rod in top wardrobe unit: 1 fitted shelf 158 E Schlafen: MULTFORMA

10 Hinge and foldingdoor wardrobes Dims. without cornice with passepartout with top LED lamp with passepartout and top LED lamp MULTFORMA with cornice incl. LED lamp Heights 229.6; and cm see sizes without cornice cm see sizes without cornice cm see sizes without cornice cm see sizes without cornice cm Depths (without handles) 61.6 cm 61.6 cm 72.0 cm 72.0 cm 70.3 cm Widths see pages Height reductions at intervals of 1 mm, width and depth reductions at intervals of 1.0 cm without surcharge; when reducing the height of doors in Design L only the top and bottom door panels are reduced in height (the middle panels always retain their original height). Width reductions are not possible on doors with highgloss fronts in Design A, G, J und F. Examples of wardrobes with hingedoor corner units, intermediate units, special sizes; lamps Hingedoor corner wardrobes can be combined with hinge/foldingdoor wardrobes and intermedia te units Optionally available with many different handles (see page 155) Hingedoor corner wardrobe 45 with 1 fitted shelf without clothes rod and 1 fitted shelf with clothes rod Hingedoor corner wardrobe with fully accessible corner 90 with 2 fitted shelves and 1 clothes rod each left and right 3 different basic heights: 229.6; 268.0; cm Unit outside widths: 97.3 x 97.3 bzw x cm (basic units) 95,3 x 97,3 bzw. 110,7 x 112,7 cm (extension units) Outside depth: 61.6 cm nside depth: 56.0 cm ntermediate units can only be supplied in Design A ntermediate units can be combined with hinge and foldingdoor wardrobes. Two intermediate units can also be placed adjacent to one another (exception: intermediate units 1, 10, 4 und 11) Optionally available with many different handles (see page 177) Many different intermediate units with various features (see pages ) Outside depth: 61.6 cm See Specialsized products chapter for notes on side sloping and further special sizes For calculating the total width when fitting a passepartout (or a cornice with lamp), please note the protrusion of 1.7 cm (or 0.5 cm) left and right! Hingedoor corner wardrobe 45 with integrated intermediate unit 3 and side sloping Hingedoor corner wardrobe with fully accessible corner 90 with integrated intermediate unit ,7 0 0 Lamps All hinge and foldingdoor wardrobes are available with an optional cornice and LED lamps or with a top LED lamp. Either one integrated LED spotlamp (12 V, 1 W), one LED light panel (12 V, 2.7 W) or one top LED lamp (12 V, 2.4 W) is fitted standard above each unit 1 or 2 door. Exception: in the case of panorama units two integrated LED spotlamps (or two LED light panels or two top LED lamps) are fitted. f required, an integrated LED spotlamp, a LED light panel or a top LED lamp can be fitted centrally above each door. t is also possible to remove individual spotlamps or light panels with a price reduction. Please include a sketch in all cases. Switching is done by an external footswitch. A remote control unit is also available as an alternative, which is charged extra. The remote control unit incorporates one transmitter and one receiver which operate all the LED lamps. Extra transmitters are available against a surcharge. The footswitch is omitted when the remote control unit is employed. When an intermediate unit with integrated LED lamps and top LED lamps or a cornice with LED lamps are included together, the switch is coupled. Please note: When planning a cornice, please note that a minimum distance of 2.0 cm to the ceiling must be observed. See page 176 for further information! E Schlafen: MULTFORMA

11 Hingedoor wardrobes Basic units For each project please remember to leave a 2.0 cm gap to the ceiling and at the side for assembly! Lists of versions: see pages Height: 229.6; und cm (Heights with passepartout and/or LED lamp or cornice incl. LEDlamp: see table page 159) Width: see table (Widths with passepartout: cm each side; with cornice: cm each side) Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. LEDlamp: see table page 159) Basic units with 2 outer sidesections (each 2 cm thick) For each wardrobe combination, the first element on the left is considered to be the basic unit, incorporating both outer sidesections. One can only include one basic unit in each combination. When adding on extension units, the righthand sidesection of the basic unit is employed as the end sidesection of the complete combination. The surcharge for the passepartout frame of the basic units includes the left and righthand vertical frame as well as the horizontal frame, the surcharge for the extension units only includes the horizontal frame. When adding on extension units, the righthand frame of the passepartout of the basic unit is employed as the end unit of the complete combination. Cornice and passepartout unit are fulllength up to 302 cm width. Design A Design A plus Design G Design G plus Design L with side fillets with side fillets Design J Left profiled end unit single door, left, 52 cm wide cm high A AP G GP L J , ,6 L Sideward distance must be 20 cm (per door) to open doors fully. Because of the identical depth of 40.1 cm, it is also possible to add on MULTVARS ancillary units! cm high cm high A AP G GP L J A AP G GP L J Left profiled end unit twindoor, 102 cm wide cm high A20104 AP20104 G20104 GP20104 L20104 J , ,6 L Sideward distance must be 20 cm (per door) to open doors fully. Because of the identical depth of 40.1 cm, it is also possible to add on MULTVARS ancillary units! cm high cm high A30104 AP30104 G30104 GP30104 L30104 J30104 A40104 AP40104 G40104 GP40104 L40104 J40104 Singledoor unit, left or right, 42 cm wide cm high A02011 L A02012 R AP02011 L AP02012 R G02011 L G02012 R GP02011 L GP02012 R L02011 L L02012 R J02011 L J02012 R L cm high A03011 L A03012 R AP03011 L AP03012 R G03011 L G03012 R GP03011 L GP03012 R L03011 L L03012 R J03011 L J03012 R cm high A04011 L A04012 R AP04011 L AP04012 R L/R = Door hinge left/right G04011 L G04012 R GP04011 L GP04012 R L04011 L L04012 R J04011 L J04012 R E Schlafen: MULTFORMA

12 Hingedoor wardrobes Basic units Please state the versions for the handles and the wardrobe interior fittings! MULTFORMA Height: 229.6; und cm (Heights with passepartout and/or LED lamp or cornice incl. LEDlamp: see table page 159) Width: see table (Widths with passepartout: cm each side; with cornice: cm each side) Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. LEDlamp: see table page 159) Design F Design F plus with side fillets passepartout top LED lamp 1 lamp cornice with integrated LED spotlamps 1 spotlamp cornice with integrated LED light panels 1 lamp handle slat lamp for doors in Design J 1 lamp mirror Each wardrobe door in Design A, A plus, J, F and F plus can be fitted with an optional mirror (vertical facet), which is charged extra (mirrors not possible for Design G, G plus and L). nformation on the energy class: see page 176 below! F FP F FP F F20104 FP FP20104 Please mark exactly in the front sketch or state in the order (from left), which hingedoors from Design J are to be fitted with a handle slat lamp. lamps per hingedoor: Please mark exactly in the front sketch or state in the order (from left), which hingedoors are to be fitted with a mirror. mirror per hingedoor: F30104 FP for cm height: for cm height: F40104 FP40104 for cm Height: F02011 L F02012 R FP02011 L FP02012 R 341 F03011 L F03012 R FP03011 L FP03012 R F04011 L F04012 R E Schlafen: MULTFORMA FP04011 L FP04012 R 3414 L/R = Door hinge left/right Please also note the functional and highquality wardrobe interior fittings as well as the special articles and possible specialsized products in the separate chapters on Wardrobe interior fittings and Special products. 161

13 Hingedoor wardrobes Basic units For each project please remember to leave a 2.0 cm gap to the ceiling and at the side for assembly! Lists of versions: see pages Height: 229.6; und cm (Heights with passepartout and/or LED lamp or cornice incl. LEDlamp: see table page 159) Width: see table (Widths with passepartout: cm each side; with cornice: cm each side) Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. LEDlamp: see table page 159) Basic units with 2 outer sidesections (each 2 cm thick) For each wardrobe combination, the first element on the left is considered to be the basic unit, incorporating both outer sidesections. One can only include one basic unit in each combination. When adding on extension units, the righthand sidesection of the basic unit is employed as the end sidesection of the complete combination. The surcharge for the passepartout frame of the basic units includes the left and righthand vertical frame as well as the horizontal frame, the surcharge for the extension units only includes the horizontal frame. When adding on extension units, the righthand frame of the passepartout of the basic unit is employed as the end unit of the complete combination. Cornice and passepartout unit are fulllength up to 302 cm width. Design A Design A plus Design G Design G plus Design L with side fillets with side fillets Design J Singledoor unit, left or right, 52 cm wide cm high A2011 L A2012 R AP2011 L AP2012 R G2011 L G2012 R GP2011 L GP2012 R L2011 L L2012 R J2011 L J2012 R L cm high A3011 L A3012 R AP3011 L AP3012 R G3011 L G3012 R GP3011 L GP3012 R L3011 L L3012 R J3011 L J3012 R cm high A4011 L A4012 R AP4011 L AP4012 R G4011 L G4012 R GP4011 L GP4012 R L4011 L L4012 R J4011 L J4012 R Twindoor unit, 82 cm wide cm high A0202 AP0202 G0202 GP0202 L0202 J cm high A0302 AP0302 G0302 GP0302 L0302 J cm high A0402 AP0402 G0402 GP0402 L0402 J0402 Twindoor unit, 102 cm wide cm high A202 AP202 G202 GP202 L202 J cm high A302 AP302 G302 GP302 L302 J cm high A402 AP402 G402 GP402 L402 J402 L/R = Door hinge left/right E Schlafen: MULTFORMA

14 Hingedoor wardrobes Basic units Please state the versions for the handles and the wardrobe interior fittings! MULTFORMA Height: 229.6; und cm (Heights with passepartout and/or LED lamp or cornice incl. LEDlamp: see table page 159) Width: see table (Widths with passepartout: cm each side; with cornice: cm each side) Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. LEDlamp: see table page 159) Design F Design F plus with side fillets passepartout top LED lamp 1 lamp cornice with integrated LED spotlamps 1 spotlamp cornice with integrated LED light panels 1 lamp handle slat lamp for doors in Design J 1 lamp mirror Each wardrobe door in Design A, A plus, J, F and F plus can be fitted with an optional mirror (vertical facet), which is charged extra (mirrors not possible for Design G, G plus and L). nformation on the energy class: see page 176 below! F2011 L F2012 R FP2011 L FP2012 R 342 F3011 L F3012 R FP3011 L FP3012 R 3422 F4011 L F4012 R F0202 FP4011 L FP4012 R FP Please mark exactly in the front sketch or state in the order (from left), which hingedoors from Design J are to be fitted with a handle slat lamp. lamps per hingedoor: Please mark exactly in the front sketch or state in the order (from left), which hingedoors are to be fitted with a mirror. mirror per hingedoor: F0302 FP for cm height: for cm height: F0402 FP for cm Height: F202 FP F302 FP F402 E Schlafen: MULTFORMA FP L/R = Door hinge left/right Please also note the functional and highquality wardrobe interior fittings as well as the special articles and possible specialsized products in the separate chapters on Wardrobe interior fittings and Special products. 163

15 Hingedoor wardrobes Extension units For each project please remember to leave a 2.0 cm gap to the ceiling and at the side for assembly! Lists of versions: see pages Height: 229.6; und cm (Heights with passepartout and/or LED lamp or cornice incl. LEDlamp: see table page 159) Width: see table (Widths with passepartout: cm each side; with cornice: cm each side) Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. LEDlamp: see table page 159) Extension units with 1 centre partition (2 cm thick) The surcharge for the passepartout frame of the extension units only includes the horizontal frame. When adding on extension units, the righthand frame of the passepartout of the basic unit is employed as the end unit of the complete combination. Cornice and passepartout unit are fulllength up to 302 cm width. Design A Design A plus Design G Design G plus Design L with side fillets with side fillets Design J Right profiled end unit, single door, left or right, 70 cm wide 61, ,1 R Sideward distance must be 20 cm (per door) to open doors fully. Because of the identical depth of 40.1 cm, it is also possible to add on MULTVARS ancillary units! cm high cm high cm high A AP G GP L J A AP G GP L J A AP G GP L J Right profiled end unit, single door, left or right, 80 cm wide 61, ,1 R Sideward distance must be 20 cm (per door) to open doors fully. Because of the identical depth of 40.1 cm, it is also possible to add on MULTVARS ancillary units! cm high cm high cm high A00104 AP00104 G00104 GP00104 L00104 J00104 A10104 AP10104 G10104 GP10104 L10104 J10104 A70104 AP70104 G70104 GP70104 L70104 J70104 Singledoor unit, left or right, 40 cm wide cm high A00011 L A00012 R AP00011 L AP00012 R G00011 L G00012 R GP00011 L GP00012 R L00011 L L00012 R J00011 L J00012 R R cm high A01011 L A01012 R AP01011 L AP01012 R G01011 L G01012 R GP01011 L GP01012 R L01011 L L01012 R J01011 L J01012 R cm high A71011 L A71012 R AP71011 L AP71012 R L/R = Door hinge left/right G71011 L G71012 R GP71011 L GP71012 R L71011 L L71012 R J71011 L J71012 R E Schlafen: MULTFORMA

16 Hingedoor wardrobes Extension units Please state the versions for the handles and the wardrobe interior fittings! MULTFORMA Height: 229.6; und cm (Heights with passepartout and/or LED lamp or cornice incl. LEDlamp: see table page 159) Width: see table (Widths with passepartout: cm each side; with cornice: cm each side) Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. LEDlamp: see table page 159) Design F Design F plus with side fillets passepartout top LED lamp 1 lamp cornice with integrated LED spotlamps 1 spotlamp cornice with integrated LED light panels 1 lamp handle slat lamp for doors in Design J 1 lamp mirror Each wardrobe door in Design A, A plus, J, F and F plus can be fitted with an optional mirror (vertical facet), which is charged extra (mirrors not possible for Design G, G plus and L). nformation on the energy class: see page 176 below! F FP F FP F F00104 FP FP00104 Please mark exactly in the front sketch or state in the order (from left), which hingedoors from Design J are to be fitted with a handle slat lamp. lamps per hingedoor: Please mark exactly in the front sketch or state in the order (from left), which hingedoors are to be fitted with a mirror. mirror per hingedoor: F10104 FP for cm height: for cm height: F70104 FP70104 for cm Height: F00011 L F00012 R FP00011 L FP00012 R , F01011 L F01012 R FP01011 L FP01012 R F71011 L F71012 R E Schlafen: MULTFORMA FP71011 L FP71012 R 346 L/R = Door hinge left/right Please also note the functional and highquality wardrobe interior fittings as well as the special articles and possible specialsized products in the separate chapters on Wardrobe interior fittings and Special products. 165

17 Hingedoor wardrobes Extension units For each project please remember to leave a 2.0 cm gap to the ceiling and at the side for assembly! Lists of versions: see pages Height: 229.6; und cm (Heights with passepartout and/or LED lamp or cornice incl. LEDlamp: see table page 159) Width: see table (Widths with passepartout: cm each side; with cornice: cm each side) Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. LEDlamp: see table page 159) Extension units with 1 centre partition (2 cm thick) The surcharge for the passepartout frame of the extension units only includes the horizontal frame. When adding on extension units, the righthand frame of the passepartout of the basic unit is employed as the end unit of the complete combination. Cornice and passepartout unit are fulllength up to 302 cm width. Design A Design A plus Design G Design G plus Design L with side fillets with side fillets Design J Singledoor unit, left or right, 50 cm wide cm high A0011 L A0012 R AP0011 L AP0012 R G0011 L G0012 R GP0011 L GP0012 R L0011 L L0012 R J0011 L J0012 R R cm high A1011 L A1012 R AP1011 L AP1012 R G1011 L G1012 R GP1011 L GP1012 R L1011 L L1012 R J1011 L J1012 R cm high A7011 L A7012 R AP7011 L AP7012 R G7011 L G7012 R GP7011 L GP7012 R L7011 L L7012 R J7011 L J7012 R Twindoor unit, 80 cm wide cm high A0002 AP0002 G0002 GP0002 L0002 J cm high A0102 AP0102 G0102 GP0102 L0102 J cm high A7102 AP7102 G7102 GP7102 L7102 J7102 Twindoor unit, 100 cm wide cm high A002 AP002 G002 GP002 L002 J cm high A102 AP102 G102 GP102 L102 J cm high A702 AP702 G702 GP702 L702 J702 L/R = Door hinge left/right E Schlafen: MULTFORMA

18 Hingedoor wardrobes Extension units Please state the versions for the handles and the wardrobe interior fittings! MULTFORMA Height: 229.6; und cm (Heights with passepartout and/or LED lamp or cornice incl. LEDlamp: see table page 159) Width: see table (Widths with passepartout: cm each side; with cornice: cm each side) Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. LEDlamp: see table page 159) Design F Design F plus with side fillets passepartout top LED lamp 1 lamp cornice with integrated LED spotlamps 1 spotlamp cornice with integrated LED light panels 1 lamp handle slat lamp for doors in Design J 1 lamp mirror Each wardrobe door in Design A, A plus, J, F and F plus can be fitted with an optional mirror (vertical facet), which is charged extra (mirrors not possible for Design G, G plus and L). nformation on the energy class: see page 176 below! F0011 L F0012 R FP0011 L FP0012 R 347 F1011 L F1012 R FP1011 L FP1012 R F7011 L F7012 R F0002 FP7011 L FP7012 R FP Please mark exactly in the front sketch or state in the order (from left), which hingedoors from Design J are to be fitted with a handle slat lamp. lamps per hingedoor: Please mark exactly in the front sketch or state in the order (from left), which hingedoors are to be fitted with a mirror. mirror per hingedoor: F0102 FP for cm height: for cm height: F7102 FP for cm Height: F002 FP F102 FP F702 E Schlafen: MULTFORMA FP L/R = Door hinge left/right Please also note the functional and highquality wardrobe interior fittings as well as the special articles and possible specialsized products in the separate chapters on Wardrobe interior fittings and Special products. 167

19 Foldingdoor wardrobes Basic units For each project please remember to leave a 2.0 cm gap to the ceiling and at the side for assembly! Lists of versions: see pages Height: 229,6 und 268,0 cm (Heights with passepartout and/or LED lamp or cornice incl. LEDlamp: see table page 159) Width: see table (Widths with passepartout: cm each side; with cornice: cm each side) Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. LEDlamp: see table page 159) Basic units with 2 outer sidesections (each 2 cm thick) For each wardrobe combination, the first element on the left is considered to be the basic unit, incorporating both outer sidesections. One can only include one basic unit in each combination. When adding on extension units, the righthand sidesection of the basic unit is employed as the end sidesection of the complete combination. The surcharge for the passepartout frame of the basic units includes the left and righthand vertical frame as well as the horizontal frame, the surcharge for the extension units only includes the horizontal frame. When adding on extension units, the righthand frame of the passepartout of the basic unit is employed as the end unit of the complete combination. Cornice and passepartout unit are fulllength up to 302 cm width. Design A Design A plus Design G Design G plus Design L with side fillets with side fillets Design J Twindoor unit, left or right, 82 cm wide cm high A2221 L A2222 R AP2221 L AP2222 R G2221 L G2222 R GP2221 L GP2222 R L2221 L L2222 R J2221 L J2222 R L cm high A3221 L A3222 R AP3221 L AP3222 R G3221 L G3222 R GP3221 L GP3222 R L3221 L L3222 R J3221 L J3222 R Twindoor unit, left or right, 102 cm wide cm high A2321 L A2322 R AP2321 L AP2322 R G2321 L G2322 R GP2321 L GP2322 R L2321 L L2322 R J2321 L J2322 R L cm high A3321 L A3322 R AP3321 L AP3322 R G3321 L G3322 R GP3321 L GP3322 R L3321 L L3322 R J3321 L J3322 R Panorama unit, 4door, 162 cm wide; without partition cm high A2420 AP2420 G2420 GP2420 L2420 J cm high A3420 AP3420 G3420 GP3420 L3420 J3420 Panorama unit, 4door, 202 cm wide; without partition cm high A2520 AP2520 G2520 GP2520 L2520 J cm high A3520 AP3520 G3520 GP3520 L3520 J3520 L/R = Door hinge left/right E Schlafen: MULTFORMA

20 Foldingdoor wardrobes Basic units Please state the versions for the handles and the wardrobe interior fittings! MULTFORMA Height: 229,6 und 268,0 cm (Heights with passepartout and/or LED lamp or cornice incl. LEDlamp: see table page 159) Width: see table (Widths with passepartout: cm each side; with cornice: cm each side) Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. LEDlamp: see table page 159) Design F Design F plus with side fillets passepartout top LED lamp 1 lamp cornice with integrated LED spotlamps 1 spotlamp cornice with integrated LED light panels 1 lamp handle slat lamp for doors in Design J 1 lamp mirror Each wardrobe door in Design A, A plus, J, F and F plus can be fitted with an optional mirror (vertical facet), which is charged extra (mirrors not possible for Design G, G plus and L). nformation on the energy class: see page 176 below! F2221 L F2222 R FP2221 L FP2222 R F3221 L F3222 R FP3221 L FP3222 R 3503 F2321 L F2322 R FP2321 L FP2322 R Please mark exactly in the front sketch or state in the order (from left), foldingdoors from Design J are to be fitted with a handle slat lamp lamps per folding door: Please mark exactly in the front sketch or state in the order (from left), which foldingdoor wings are to be fitted with a mirror. mirror per foldingdoor wing: F3321 L F3322 R FP3321 L FP3322 R 3513 for cm height: F2420 FP for cm height: lamps spotlamps lamps F3420 FP F2520 FP lamps 2 spotlamps lamps F3520 E Schlafen: MULTFORMA FP L/R = Door hinge left/right Please also note the functional and highquality wardrobe interior fittings as well as the special articles and possible specialsized products in the separate chapters on Wardrobe interior fittings and Special products. 169

21 Foldingdoor wardrobes Extension units For each project please remember to leave a 2.0 cm gap to the ceiling and at the side for assembly! Lists of versions: see pages Height: 229,6 und 268,0 cm (Heights with passepartout and/or LED lamp or cornice incl. LEDlamp: see table page 159) Width: see table (Widths with passepartout: cm each side; with cornice: cm each side) Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. LEDlamp: see table page 159) Extension units with 1 centre partition (2 cm thick) The surcharge for the passepartout frame of the extension units only includes the horizontal frame. When adding on extension units, the righthand frame of the passepartout of the basic unit is employed as the end unit of the complete combination. Cornice and passepartout unit are fulllength up to 302 cm width. Design A Design A plus Design G Design G plus Design L with side fillets with side fillets Design J Twindoor unit, left or right, 80 cm wide R cm high cm high A0221 L A0222 R A1221 L A1222 R AP0221 L AP0222 R AP1221 L AP1222 R G0221 L G0222 R G1221 L G1222 R GP0221 L GP0222 R GP1221 L GP1222 R L0221 L L0222 R L1221 L L1222 R J0221 L J0222 R J1221 L J1222 R Twindoor unit, left or right, 100 cm wide R cm high A0321 L A0322 R AP0321 L AP0322 R G0321 L G0322 R GP0321 L GP0322 R L0321 L L0322 R J0321 L J0322 R cm high A1321 L A1322 R AP1321 L AP1322 R G1321 L G1322 R GP1321 L GP1322 R L1321 L L1322 R J1321 L J1322 R Panorama unit, 4door, 160 cm wide; without partition cm high A0420 AP0420 G0420 GP0420 L0420 J cm high A1420 AP1420 G1420 GP1420 L1420 J1420 Panorama unit, 4door, 200 cm wide; without partition cm high A0520 AP0520 G0520 GP0520 L0520 J cm high A1520 AP1520 G1520 GP1520 L1520 J1520 L/R = Door hinge left/right E Schlafen: MULTFORMA

22 Foldingdoor wardrobes Extension units Please state the versions for the handles and the wardrobe interior fittings! MULTFORMA Height: 229,6 und 268,0 cm (Heights with passepartout and/or LED lamp or cornice incl. LEDlamp: see table page 159) Width: see table (Widths with passepartout: cm each side; with cornice: cm each side) Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. LEDlamp: see table page 159) Design F Design F plus with side fillets passepartout top LED lamp 1 lamp cornice with integrated LED spotlamps 1 spotlamp cornice with integrated LED light panels 1 lamp handle slat lamp for doors in Design J 1 lamp mirror Each wardrobe door in Design A, A plus, J, F and F plus can be fitted with an optional mirror (vertical facet), which is charged extra (mirrors not possible for Design G, G plus and L). nformation on the energy class: see page 176 below! F0221 L F0222 R FP0221 L FP0222 R F1221 L F1222 R FP1221 L FP1222 R 355 F0321 L F0322 R FP0321 L FP0322 R Please mark exactly in the front sketch or state in the order (from left), foldingdoors from Design J are to be fitted with a handle slat lamp lamps per foldingdoor: Please mark exactly in the front sketch or state in the order (from left), which foldingdoor wings are to be fitted with a mirror. mirror per foldingdoor wing: F1321 L F1322 R FP1321 L FP1322 R 356 for cm height: F0420 FP for cm height: lamps spotlamps lamps F1420 FP F0520 FP lamps spotlamps lamps F1520 E Schlafen: MULTFORMA FP L/R = Door hinge left/right Please also note the functional and highquality wardrobe interior fittings as well as the special articles and possible specialsized products in the separate chapters on Wardrobe interior fittings and Special products. 171

23 Hingedoor corner wardrobes Basic units For each project please remember to leave a 2.0 cm gap to the ceiling and at the side for assembly! Lists of versions: see pages Height: 229.6; and cm (Heights with top LED lamp or cornice incl. LED lamp: see table page 159) Width: see table (Widths with cornice: cm each side) Depth: 61.6 cm (Depths with top LED lamp or cornice incl. LED lamp: see table page 159) Basic units with 2 outer sidesections (each 2 cm thick) For each wardrobe combination, the first element on the left is considered to be the basic unit, incorporating both outer sidesections. One can only include one basic unit in each combination. When adding on extension units, the righthand sidesection of the basic unit is employed as the end sidesection of the complete combination. Cornice and passepartout unit are fulllength up to 302 cm width. Design A Design A plus Design G Design G plus Design L with side fillets with side fillets Design J 172 Hingedoor corner wardrobe 45 nterior fittings: 1 fitted shelf without clothes rod 1 fitted shelf with Clothes rod For production we require the details of series of assembly from left to right. L/R = door hinge left/right R Depending on the handle version, the door hinges of any 1door wardrobe units which are situated directly next to the hingedoor corner wardrobe 45 must be fitted on the side next to this hingedoor corner wardrobe (exception: this is not necessary when fitting handles 011, 012, 013 and 026)! Hingedoor corner wardrobe with Fully accessible corner 90 Twindoor unit Lefthand type (L): left 2 fitted shelves and 1 clothes rod, each 106,7 cm wide; right 2 fitted shelves and 1 clothes rod, each 52,5 cm wide Righthand type (R): interior fittings in reverse order For production we require the details of series of assembly from left to right. L The door hinges of any 1door wardrobe units included which are situated directly next to the hingedoor corner wardrobe with fully accessible corner 90 must be fitted on the side next to this hingedoor corner wardrobe! cm high cm high cm high cm high cm high cm high A22191 L A22192 R A32191 L A32192 R A42191 L A42192 R A25191 L A25192 R A35191 L A35192 R A45191 L A45192 R AP22191 L AP22192 R AP32191 L AP32192 R AP42191 L AP42192 R AP25191 L AP25192 R AP35191 L AP35192 R AP45191 L AP45192 R G22191 L G22192 R G32191 L G32192 R G42191 L G42192 R G25191 L G25192 R G35191 L G35192 R G45191 L G45192 R GP22191 L GP22192 R GP32191 L GP32192 R GP42191 L GP42192 R GP25191 L GP25192 R GP35191 L GP35192 R GP45191 L GP45192 R L22191 L L22192 R L32191 L L32192 R L42191 L L42192 R L25191 L L25192 R L35191 L L35192 R L45191 L L45192 R J22191 L J22192 R J32191 L J32192 R J42191 L J42192 R J25191 L J25192 R J35191 L J35192 R J45191 L J45192 R E Schlafen: MULTFORMA

24 Hingedoor corner wardrobes Basic units Please state the versions for the handles and the wardrobe interior fittings! MULTFORMA Height: 229.6; and cm (Heights with top LED lamp or cornice incl. LED lamp: see table page 159) Width: see table (Widths with cornice: cm each side) Depth: 61.6 cm (Depths with top LED lamp or cornice incl. LED lamp: see table page 159) Design F Design F plus with side fillets passepartout top LED lamp 1 lamp cornice with integrated LED spotlamps 1 spotlamp cornice with integrated LED light panels 1 lamp handle lamps for doors in Design J 1 lamp mirror Each wardrobe door in Design A, A plus, J, F and F plus can be fitted with an optional mirror (vertical facet), which is charged extra (mirrors not possible for Design G, G plus and L). nformation on the energy class: see page 176 below! F22191 L F22192 R FP22191 L FP22192 R F32191 L F32192 R FP32191 L FP32192 R Please mark exactly in the front sketch or state in the order (from left), which hingedoors from Design J are to be fitted with a handle slat lamp. lamps per hingedoor: Please mark exactly in the front sketch or state in the order (from left), which hingedoors are to be fitted with a mirror. mirror per hingedoor: F42191 L F42192 R FP42191 L FP42192 R for cm height: for cm height: F25191 L F25192 R FP25191 L FP25192 R for cm Height: F35191 L F35192 R FP35191 L FP35192 R lamps spotlamps lamps F45191 L F45192 R E Schlafen: MULTFORMA FP45191 L FP45192 R Please also note the functional and highquality wardrobe interior fittings as well as the special articles and possible specialsized products in the separate chapters on Wardrobe interior fittings and Special products. 173

25 Hingedoor corner wardrobes Extension units For each project please remember to leave a 2.0 cm gap to the ceiling and at the side for assembly! Lists of versions: see pages Height: 229.6; and cm (Heights with top LED lamp or cornice incl. LED lamp: see table page 159) Width: see table (Widths with cornice: cm each side) Depth: 61.6 cm (Depths with top LED lamp or cornice incl. LED lamp: see table page 159) Extension units with 1 centre partition (2 cm thick) The surcharge for the passepartout frame of the extension units only includes the horizontal frame. When adding on extension units, the righthand frame of the passepartout of the basic unit is employed as the end unit of the complete combination. Cornice and passepartout unit are fulllength up to 302 cm width. Design A Design A plus Design G Design G plus Design L with side fillets with side fillets Design J 174 Hingedoor corner wardrobe 45 nterior fittings: 1 fitted shelf without clothes rod 1 fitted shelf with clothes rod For production we require the details of series of assembly from left to right. L/R = door hinge left/right L R Depending on the handle version, the door hinges of any 1door wardrobe units which are situated directly next to the hingedoor corner wardrobe 45 must be fitted on the side next to this hingedoor corner wardrobe (exception: this is not necessary when fitting handles 011, 012, 013 and 026)! Hingedoor corner wardrobe with fully accessible corner 90 Twindoor unit Lefthand type (L): left 2 fitted shelves and 1 clothes rod, each cm wide; right 2 fitted shelves and 1 clothes rod, each 52.5 cm wide Righthand type (R): interior fittings in reverse order For production we require the details of series of assembly from left to right. The door hinges of any 1door wardrobe units included which are situated directly next to the hingedoor corner wardrobe with fully accessible corner 90 must be fitted on the side next to this hingedoor corner wardrobe! cm high cm high cm high cm high cm high cm high A20191 L A20192 R A30191 L A30192 R A40191 L A40192 R A05191 L A05192 R A06191 L A06192 R A08191 L A08192 R AP20191 L AP20192 R AP30191 L AP30192 R AP40191 L AP40192 R AP05191 L AP05192 R AP06191 L AP06192 R AP08191 L AP08192 R G20191 L G20192 R G30191 L G30192 R G40191 L G40192 R G05191 L G05192 R G06191 L G06192 R G08191 L G08192 R GP20191 L GP20192 R GP30191 L GP30192 R GP40191 L GP40192 R GP05191 L GP05192 R GP06191 L GP06192 R GP08191 L GP08192 R L20191 L L20192 R L30191 L L30192 R L40191 L L40192 R L05191 L L05192 R L06191 L L06192 R L08191 L L08192 R J20191 L J20192 R J30191 L J30192 R J40191 L J40192 R J05191 L J05192 R J06191 L J06192 R J08191 L J08192 R E Schlafen: MULTFORMA

26 Hingedoor corner wardrobes Extension units Please state the versions for the handles and the wardrobe interior fittings! MULTFORMA Height: 229.6; and cm (Heights with top LED lamp or cornice incl. LED lamp: see table page 159) Width: see table (Widths with cornice: cm each side) Depth: 61.6 cm (Depths with top LED lamp or cornice incl. LED lamp: see table page 159) Design F Design F plus with side fillets passepartout A passepartout section cannot be fitted if the hingedoor corner wardrobe extension unit is included as the last unit (= end of wardrobe). top LED lamp 1 lamp cornice with integrated LED spotlamps 1 spotlamp cornice with integrated LED light panels 1 lamp handle lamps for doors in Design J 1 lamp mirror Each wardrobe door in Design A, A plus, J, F and F plus can be fitted with an optional mirror (vertical facet), which is charged extra (mirrors not possible for Design G, G plus and L). nformation on the energy class: see page 176 below! F20191 L F20192 R FP20191 L FP20192 R 366 F30191 L F30192 R FP30191 L FP30192 R Please mark exactly in the front sketch or state in the order (from left), which hingedoors from Design J are to be fitted with a handle slat lamp. lamps per hingedoor: Please mark exactly in the front sketch or state in the order (from left), which hingedoors are to be fitted with a mirror. mirror per hingedoor: F40191 L F40192 R FP40191 L FP40192 R 366 for cm height: for cm height: F05191 L F05192 R FP05191 L FP05192 R 367 for cm Height: F06191 L F06192 R FP06191 L FP06192 R lamps spotlamps lamps F08191 L F08192 R E Schlafen: MULTFORMA FP08191 L FP08192 R 367 Please also note the functional and highquality wardrobe interior fittings as well as the special articles and possible specialsized products in the separate chapters on Wardrobe interior fittings and Special products. 175

27 Accessories Lists of versions: see pages Accessories for the hingedoor corner wardrobe with fully accessible corner 90 Fitted corner shelf 2.3 cm thick L R Fitted corner shelf 2.3 cm thick with clothes rods L R L L Centre partition centre partition with integrated swingout clothes rod Aluminium colour chrome gloss Centre partition 4.7 cm thick; clothes rod with clothes hooks in metal, optionally in aluminium colour or chrome gloss Please note that the total width of the hinge/foldingdoor wardrobes is increased by 2.7 cm when this centre partition is included. Cannot be used as an outer side section, beside intermediate units with open compartment and intermediate unit 4 and 11, with interior TV fittings or beside hingedoor corner wardrobes cm high Height reductions down to 201 cm without surcharge! cm high cm high Lamps All hinge/foldingdoor wardrobes are available with an optional cornice and LED lamps or with a top LED lamp. Either one integrated LED spotlamp (12 V, 1 W), one LED light panel (12 V, 2.7 W) or one top LED lamp (12 V, 2.4 W) is fitted standard above each unit 1 or 2 door. Exception: in the case of panorama units two integrated LED spotlamps (or two light panels or two top LED lamps) are fitted. f required, an integrated LED spotlamp, a LED light panel or a top LED lamp can be fitted centrally above each door. t is also possible to remove individual spotlamps or light panels with a price reduction. Please include a sketch in all cases. Switching is done by an external footswitch. A remote control unit is also available as an alternative, which is charged extra. The remote control unit incorporates one transmitter and one receiver which operate all the LED lamps. Extra transmitters are available against a surcharge. The footswitch is omitted when the remote control unit is employed. When an intermediate unit with integrated LED lamps and top LED lamps or a cornice with LED lamps are included together, the switch is coupled. Please note: When planning a cornice, please note that a minimum distance of 2.0 cm to the ceiling must be observed. Remote control Cornice with integrated LED spotlamps each additional spotlamp type Price reduction for one spotlamp (if not required in cornice)) type This luminaire contains builtin LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V; 1 W Cornice with integrated LED light panels each additional light panel type Price reduction for one light panel (if not required in cornice)) type This luminaire contains builtin LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V; 2.7 W Top LED lamps each additional lamp type This luminaire contains builtin LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V; 2.4 W = = 3683 = 3682 = 3691 = remote control (transmitter + receiver) type extra transmitter type = = Handle slat lamp for doors in Design J This luminaire contains builtin LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V; 0.3 W per 10 cm length extra receiver type 1603 = MagicTronic The lamps are normally operated by an external footswitch. As an alternative we can also provide a MagicTronic switch, which is charged extra. By stroking the outer or top side of the unit at the same level as the invisible integrated sensor it is possible to switch all the lamps on and off ( Stroking method ). As an alternative the position of the hidden sensor can also be marked with a small metal plate on the furniture unit ( Marking method ). Lamps with a maximum power of 200 W can be operated by a MagicTronic unit (230 V). The footswitch is omitted when a MagicTronic unit is included. 176 The MagicTronic can only be fitted in a side passepartout. Standard fitting position: in the right passepartout in approx. 130 cm height. f the MagicTronic sensor is to be fitted in the left passepartout or differently from the described standard position, please state this clearly in the order and in the sketch. n case of doubt, please get in touch with your hülsta customer advisor! 7617 E Schlafen: MULTFORMA

28 ntermediate units MULTFORMA Design and front versions for intermediate units Design versions for intermediate units: drawers and doors of the intermediate units are only available in Design A. Front versions of glass design blind of intermediate unit 4 and 11: for lacquer versions: of rearlacquered glass in the matching lacquer version; for wood versions: optionally: of rearlacquered glass in pure white, white, wool white, sand or grey, please state clearly in the order! Not available in highgloss surface versions! Versions of open compartment of intermediate units 1, 10, 4 and 11: for lacquer and wood versions: in the matching version; for highgloss versions: in the matching matt lacquer version Allocation of handles to intermediate units Knob version of lower drawers: The lower drawers of all intermediate units are always fitted with knobs that match the adjacent handles of the hinge/foldingdoors in appearance. Exception: f handle 031 is fitted on the adjacent hinge/foldingdoors or if the adjacent hinge/foldingdoors are required in Design J, F or F plus, the drawers of the intermediate units are supplied with standard knobs in chrome matt. Handle version of doors: n the intermediate units 13, 10 and 1215 the upper doors are always supplied with handles in the same version as the handles on the adjacent hinge/foldingdoors (with handle 031: knobs in chrome matt). The same applies if the adjacent hinge/foldingdoors are required in Design J, F or F plus. Exception: f handle 046/047 or 048/049 is required, the doors and drawers of the intermediate units 2, 3 and 1215 are fitted with a standard handle 046/047. n the intermediate units 16 and 17, the top doors are always fitted with the same handles as the bottom drawers. f handle 014/015 is required, the top doors are fitted with the same handle 014/015 as the adjacent hinge/foldingdoors cm 100 cm 120 cm 80 cm 100 cm 120 cm cm 120 cm 102,2 cm 102,2 cm 100 cm 100 cm f you choose handle 011 for the adjacent hinge/foldingdoor wardrobes, the drawers of the intermediate unit automatically have the following handle: f you choose handle 012 for the adjacent hinge/foldingdoor wardrobes, the drawers of the intermediate unit automatically have the following handle: f you choose handle 014/015 for the adjacent hinge/ foldingdoor wardrobes, the drawers of the intermediate unit automatically have the following handle: f you choose handle 046/047 or 048/049 for the adjacent hinge/ foldingdoor war d robes, the drawers of the intermediate unit automatically have the following handle: matching version f you choose handle 026/013 for the adjacent hinge/ foldingdoor wardrobes, the drawers of the intermediate unit automatically have the following handle: f you choose handle 029/030 for the adjacent hinge/ foldingdoor wardrobes, the drawers of the intermediate unit automatically have the following handle: f you choose handle 031 for the adjacent hinge/ foldingdoor wardrobes, or for doors in Design J, F or F plus, the drawers of the intermediate unit automatically have the following handle: E Schlafen: MULTFORMA

29 ntermediate units For each project please remember to leave a 2.0 cm gap to the ceiling and at the side for assembly! Lists of versions: see pages Height: 229.6; and cm (Heights with passepartout and/or top LED lamp or cornice incl. LED lamp: see table page 159) Width: see table (Widths with passepartout: + 1,7 cm each side; with cornice: cm each side) Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. LED lamp: see table page 159) ntermediate units are also possible on request as basic and end units or standalone units; exception: intermediate unit 1, 10, 4 and 11 is only suitable as ntermediate unit (between two wardrobe units). Two intermediate units can also be placed adjacently to one another (exception: intermediate unit 1, 10, 4 and 11). Height reductions (done on upper doors; not possible for ntermediate unit 1, 10, 4 and 11) are possible down to a total height of 201 cm. Width reductions are generally not possible. Depth reductions are not possible for intermediate unit 1, 10, 4 and 11. Drawers and doors of the intermediate units are only available in Design A.Please state the versions for the handles and the wardrobe interior fittings! Design A passepartout top LED lamp 1 lamp cornice with integrated LED spotlamps 1 spotlamp cornice with integrated LED light panels 1 lamp nformation on the energy class: see page 176 below! 2 12 ntermediate unit 2 with doors and 5 drawers 80 cm wide nterior TV unit fittings are possible, see page 183 Top: 2 doors with 2 fitted wooden shelves (door always with standard knob); inside width: 78,0 cm; inside depth: 56.0 cm Bottom: 5 drawers (inside depth: 48.5 cm); see page 177 for handle versions f a different wood/lacquer version is required for the lower drawers compared to the top hingedoors, please state so in the order. When versions from different price groups are exchanged, the higher price group is always charged. 3 ntermediate unit 3 with doors and 5 drawers 100 cm wide nterior TV unit fittings are possible, see page 183 Top: 2 doors with 2 fitted wooden shelves (door always with standard knob); inside width: 98.0 cm; inside depth: 56.0 cm Bottom: 5 drawers (inside depth: 48.5 cm); see page 177 for handle versions f a different wood/lacquer version is required for the lower drawers compared to the top hingedoors, please state so in the order. When versions from different price groups are exchanged, the higher price group is always charged. ntermediate unit 12 with doors and 5 drawers 120 cm wide nterior TV unit fittings are possible, see page cm high cm high cm high cm high cm high cm high cm high A0338 A1338 A7338 A03310 A13310 A73310 A Top: 2 doors with 2 fitted wooden shelves (door always with standard knob); inside width: 118,0 cm; inside depth: 56.0 cm Bottom: 5 drawers (inside depth: 48.5 cm); see page 177 for handle versions f a different wood/lacquer version is required for the lower drawers compared to the top hingedoors, please state so in the order. When versions from different price groups are exchanged, the higher price group is always charged cm high cm high A13312 A E Schlafen: MULTFORMA

30 ntermediate units Please state the versions for the handles and the wardrobe interior fittings! MULTFORMA Height: 229.6; and cm (Heights with passepartout and/or top LED lamp or cornice incl. LED lamp: see table page 159) Width: see table (Widths with passepartout: + 1,7 cm each side; with cornice: cm each side) Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. LED lamp: see table page 159) ntermediate units are also possible on request as basic and end units or standalone units; exception: intermediate unit 1, 10, 4 and 11 is only suitable as intermediate unit (between two wardrobe units). Two intermediate units can also be placed adjacently to one another (exception: intermediate unit 1, 10, 4 and 11). Height reductions (done on upper doors; not possible for intermediate unit 1, 10, 4 and 11) are possible down to a total height of 201 cm. Width reductions are generally not possible. Depth reductions are not possible for intermediate unit 1, 10, 4 and 11. Drawers and doors of the intermediate units are only available in Design A. Please state the versions for the handles and the wardrobe interior fittings! Design A passepartout top LED lamp 1 lamp cornice with integrated LED spotlamps 1 spotlamp cornice with integrated LED light panels 1 lamp nformation on the energy class: see page 176 below! ntermediate unit 13 with doors and 3 drawers 80 cm wide nterior TV unit fittings are possible, see page 183 ntermediate unit 14 with doors and 3 drawers 100 cm wide nterior TV unit fittings are possible, see page 183 ntermediate unit 15 with doors and 3 drawers 120 cm wide nterior TV unit fittings are possible, see page 183 E Schlafen: MULTFORMA Top: 2 doors with 2 fitted wooden shelves (door always with standard knob); inside width: 78,0 cm; inside depth: 56.0 cm Bottom: 3 drawers (inside depth: 48.5 cm); see page 177 for handle versions f a different wood/lacquer version is required for the lower drawers compared to the top hingedoors, please state so in the order. When versions from different price groups are exchanged, the higher price group is always charged. Top: 2 doors with 2 fitted wooden shelves (door always with standard knob); inside width: 98.0 cm; inside depth: 56.0 cm Bottom: 3 drawers (inside depth: 48.5 cm); see page 177 for handle versions f a different wood/lacquer version is required for the lower drawers compared to the top hingedoors, please state so in the order. When versions from different price groups are exchanged, the higher price group is always charged. Top: 2 doors with 2 fitted wooden shelves (door always with standard knob); inside width: 118,0 cm; inside depth: 56.0 cm Bottom: 3 drawers (inside depth: 48.5 cm); see page 177 for handle versions f a different wood/lacquer version is required for the lower drawers compared to the top hingedoors, please state so in the order. When versions from different price groups are exchanged, the higher price group is always charged cm high cm high cm high cm high cm high cm high cm high cm high cm high A0348 A1348 A7348 A03410 A13410 A73410 A03412 A13412 A

31 ntermediate units For each project please remember to leave a 2.0 cm gap to the ceiling and at the side for assembly! Lists of versions: see pages Height: 229.6; and cm (Heights with passepartout and/or top LED lamp or cornice incl. LED lamp: see table page 159) Width: see table (Widths with passepartout: + 1,7 cm each side; with cornice: cm each side) Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. LED lamp: see table page 159) ntermediate units are also possible on request as basic and end units or standalone units; exception: intermediate unit 1, 10, 4 and 11 is only suitable as ntermediate unit (between two wardrobe units). Two intermediate units can also be placed adjacently to one another (exception: intermediate unit 1, 10, 4 and 11). Height reductions (done on upper doors; not possible for intermediate unit 1, 10, 4 and 11) are possible down to a total height of 201 cm. Width reductions are generally not possible. Depth reductions are not possible for intermediate unit 1, 10, 4 and 11. Drawers and doors of the intermediate units are only available in Design A. Please state the versions for the handles and the wardrobe interior fittings! Design A Surcharge for passepartout Surcharge for top LED lamp 1 lamp cornice with integrated LED spotlamps 1 spotlamp Surcharge for cornice with integrated LED light panels 1 lamp 16 ntermediate unit 16 with doors and 2 drawers 100 cm wide nformation on the energy class: see page 176 below! nterior TV unit fittings are possible, see page 183 Top: 2 doors with 2 fitted wooden shelves; see page 177 for handle versions; inside width: 98.0 cm; inside depth: 56.0 cm Bottom: 2 drawers (inside depth: 48.5 cm); see page 177 for handle versions f a different wood/lacquer version is required for the lower drawers compared to the top hinge doors, please state so in the order. When versions from different price groups are exchanged, the higher price group is always charged. ntermediate unit 17 with doors and 2 Drawers 120 cm wide nterior TV unit fittings are possible, see page 183 Top: 2 doors with 2 fitted wooden shelves; see page 177 for handle versions; inside width: 118,0 cm; inside depth: 56.0 cm Bottom: 2 drawers (inside depth: 48.5 cm); see page 177 for handle versions f a different wood/lacquer version is required for the lower drawers compared to the top hingedoors, please state so in the order. When versions from different price groups are exchanged, the higher price group is always charged cm high cm high cm high cm high cm high cm high A03710 A13710 A73710 A03712 A13712 A E Schlafen: MULTFORMA

32 ntermediate units Please state the versions for the handles and the wardrobe interior fittings! MULTFORMA Height: 229.6; and cm (Heights with passepartout and/or top LED lamp or cornice incl. LED lamp: see table page 159) Width: see table (Widths with passepartout: + 1,7 cm each side; with cornice: cm each side) Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. LED lamp: see table page 159) ntermediate units are also possible on request as basic and end units or standalone units; exception: intermediate unit 1, 10, 4 and 11 is only suitable as ntermediate unit (between two wardrobe units). Two intermediate units can also be placed adjacently to one another (exception: intermediate unit 1, 10, 4 and 11). Height reductions (done on upper doors; not possible for ntermediate unit 1, 10, 4 and 11) are possible down to a total height of 201 cm. Width reductions are generally not possible. Depth reductions are not possible for intermediate unit 1, 10, 4 and 11. Drawers and doors of the intermediate units are only available in Design A. Please state the versions for the handles and the wardrobe interior fittings! Design A Surcharge for passepartout Surcharge for top LED lamp 1 lamp Surcharge for cornice with integrated LED spotlamps 1 spotlamp Surcharge for cornice with integrated LED light panels 1 lamp Surcharge for integrated LED spotlamp 2 spotlamps (in open compartment) 1 ntermediate unit 1 with vertical slidingdoor and 5 drawers cm wide nformation on the energy class: see page 176 below! Top: open compartments, 1 fitted wooden shelf (not adjustable), 1 fitted glass shelf; vertical slidingdoor in front version, frame in carcase version (slidingdoor with standard knobs); inside height: top compartment 63.2 cm; bottom compartment 63.0 cm; inside width: 95.2 cm; inside depth: 51.5 cm cm high Bottom: 5 drawers (inside depth: 48.5 cm); see page 177 for handle versions 10 f a different wood/lacquer version is required for the lower drawers compared to the top slidingdoor, please state so in the order. When versions from different price groups are exchanged, the higher price group is always charged. ntermediate unit 1 cannot be fitted directly next to the hingedoor corner wardrobe with fully accessible corner 90! ntermediate unit 10 with vertical slidingdoor and 3 drawers cm wide A Top: open compartments, 1 fitted wooden shelf (not adjustable), 1 fitted glass shelf; vertical slidingdoor in front version, frame in carcase version (slidingdoor with standard knobs); inside height: top compartment 63.2 cm; bottom compartment 63.0 cm; inside width: 95.2 cm; inside depth: 51.5 cm cm high Bottom: 3 drawers (inside depth: 48.5 cm); see page 177 for handle versions E Schlafen: MULTFORMA f a different wood/lacquer version is required for the lower drawers compared to the top slidingdoor, please state so in the order. When versions from different price groups are exchanged, the higher price group is always charged. ntermediate unit 1 cannot be fitted directly next to the hingedoor corner wardrobe with fully accessible corner 90! A

33 ntermediate units For each project please remember to leave a 2.0 cm gap to the ceiling and at the side for assembly! Lists of versions: see pages Height: 229.6; and cm (Heights with passepartout and/or top LED lamp or cornice incl. LED lamp: see table page 159) Width: see table (Widths with passepartout: + 1,7 cm each side; with cornice: cm each side) Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. LED lamp: see table page 159) ntermediate units are also possible on request as basic and end units or standalone units; exception: intermediate unit 1, 10, 4 and 11 is only suitable as ntermediate unit (between two wardrobe units). Two intermediate units can also be placed adjacently to one another (exception: intermediate unit 1, 10, 4 and 11). Height reductions (done on upper doors; not possible for ntermediate unit 1, 10, 4 and 11) are possible down to a total height of 201 cm. Width reductions are generally not possible. Depth reductions are not possible for intermediate unit 1, 10, 4 and 11. Drawers and doors of the intermediate units are only available in Design A. Please state the versions for the handles and the wardrobe interior fittings! Design A passepartout top LED lamp 1 lamp cornice with integrated LED spotlamps 1 spotlamp cornice with integrated LED light panels 1 lamp Surcharge for integrated LED spotlamp 2 spotlamps (in open compartment) 4 ntermediate unit 4 with electronic glass design blind incl. remote control and 5 drawers 100 cm wide nformation on the energy class: see page 176 below! Top: 1 glass design blind with electronic drive and remote control (inside width: 94,5 cm; inside depth: 35,8 cm); incl. cable aperture in rear wall Front versions of glass design blind for lacquer versions: of rearlacquered glass in the matching lacquer version; for wood versions: optionally rearlacquered in pure white, white, wool white, sand or grey. Please state clearly in the order. nterior surface version behind glass design blind in white (also available optionally in lacquer, please state clearly in the order) cm high Middle: open compartment (usable inside dims.: 37.8 cm high, 98.0 cm wide, 56.0 cm deep) 11 Bottom: 5 drawers (inside depth: 48.5 cm); see page 177 for handle versions ntermediate unit 4 cannot be fitted directly next to the hingedoor corner wardrobe 45 or the hingedoor corner wardrobe with fully accessible corner 90! ntermediate unit 11 with electronic glass design blind incl. remote control and 3 drawers 100 cm wide A Top: 1 glass design blind with electronic drive and remote control (inside width: 94,5 cm; inside depth: 35,8 cm); incl. cable aperture in rear wall Front versions of glass design blind for lacquer versions: of rearlacquered glass in the matching lacquer version; for wood versions: optionally rearlacquered in pure white, white, wool white, sand or grey. Please state clearly in the order. nterior surface version behind glass design blind in white (also available optionally in lacquer, please state clearly in the order) cm high Middle: open compartment (usable inside dims.: 37.8 cm high, 98.0 cm wide, 56.0 cm deep) Bottom: 3 Drawers (inside depth: 48.5 cm); see page 177 for handle versions A ntermediate unit 11 cannot be fitted directly next to the hingedoor corner wardrobe 45 or the hingedoor corner wardrobe with fully accessible corner 90! E Schlafen: MULTFORMA

34 ntermediate units MULTFORMA nterior TV unit fittings for intermediate units nterior TV unit fittings A for intermediate units 2, 3 and 1217 TV compartment including cable aperture in TV panel (usable inside dims.: 68,1 cm high, 78,0 (98.0 or 118.0) cm wide, 35.5 cm deep; max. load: 60 kg); 2 open compartments below for electronic equipment (usable inside dims per compartment: 10.0 cm high, 38,0 (48.0 or 58.0) cm wide, 47.0 cm deep) Please pay attention to the requirements on free space (heat buildup) stated by electrical manufacturers! Please note: When interior TV unit fittings are included, the wooden doors of the intermediate units are fitted with 165 hinges exworks. The 2 fitted wooden shelves, which are fitted standard in the intermediate unit behind wooden doors, are omitted and the price has already been deducted. Because of the 165 hinges on the intermediate unit including the interior TV unit fittings, the door hinges of any 1door wardrobe units included which are situated directly next to the intermediate unit must be fitted on the side next to this intermediate unit! n the intermediate units 16 and 17 the interior TV fittings are assembled on the sides of the intermediate unit. For reasons of stability a construction shelf is also supplied, which is fitted below the lower open compartments. llustration: interior TV unit fittings in intermediate unit 3 interior TV unit fitting A for 80 cm wide intermediate unit for intermediate units 2, 3 and for intermediate units 16 and 17 for 100 cm wide intermediate unit for 120 cm wide intermediate unit nterior TV unit fittings B for intermediate units 2, 3 and 1217 TV compartment including cable aperture in TV panel (usable inside dims.: 68.1 cm high, 78.0 (98.0 or 118.0) cm wide, 35.5 cm deep; max. load: 60 kg) and with flat screen support, ideally adaptable; 2 open compartments below for electronic equipment (usable inside dims. per compartment: 10.0 cm high, 38.0 (48.0 or 58.0) cm wide, 47.0 cm deep) Please pay attention to the requirements on free space (heat buildup) stated by electrical manufacturers! The flat screen support can be adjusted 3dimensionally. t is suitable for flat screens with a screen diagonal of cm (40 85 ; please observe the usable dims. of the TV compartment; see above); max. load 45 kg. Go to to check if your flat screen can be fitted on this flat screen support. Enter the name WTL6. After a few steps you can see if your flat screen TV is compatible with the flat screen support. Suitable for curved TV s. Flat screen support compatible with VESA Norm standard: min.: 200 x 200 mm, max.: 600 x 400 mm llustration: interior TV unit fittings in intermediate unit 3 interior TV unit fitting B for intermediate units 2, 3 and 1215 for intermediate units 16 and 17 Please note: When interior TV unit fittings are included, the wooden doors of the intermediate units are fitted with 165 hinges exworks. The 2 fitted wooden shelves, which are fitted standard in the intermediate unit behind wooden doors, are omitted and the price has already been deducted. Because of the 165 hinges on the intermediate unit including the interior TV unit fittings, the door hinges of any 1door wardrobe units included which are situated directly next to the intermediate unit must be fitted on the side next to this intermediate unit! n the intermediate units 16 and 17 the interior TV fittings are assembled on the sides of the intermediate unit. For reasons of stability a construction shelf is also supplied, which is fitted below the lower open compartments. for 80 cm wide intermediate unit for 100 cm wide intermediate unit for 120 cm wide intermediate unit Flat screen support for intermediate unit 4 and 11 for fitting on rear wall of intermediate unit behind glass design blind. Flat screen support WTL6 The flat screen support can be adjusted 3dimensionally. t is suitable for flat screens with a screen diagonal of cm (40 85 ; please observe the usable dims. of the TV compartment; see above); max. load 45 kg. Go to to check if your flat screen can be fitted on this flat screen support. Enter the name WTL6. After a few steps you can see if your flat screen TV is compatible with the flat screen support. Suitable for curved TV s. Flat screen support compatible with VESA Norm standard: min.: 200 x 200 mm, max.: 600 x 400 mm E Schlafen: MULTFORMA

35 MULTFORMA slidingdoor wardrobes The modern, innovative MULTFORMA wardrobe system is suitable for individual arrangements because it is particularly versatile. New front designs give MULTFORMA its particularly exclusive look. As a universal wardrobe system, the design of MULTFORMA enables you to combine its units with all of the units in the various hülsta Bedroom ranges and almost every type of interior style. Height reductions at intervals of 1 mm, width and depth reductions at intervals of 1.0 cm without surcharge (Height and width reductions not possible for SOLST and SOLST P)! Design idea You can choose from a variety of design versions for the MULTFORMA slidingdoor wardrobes: Design A Design M Design G Design L SOLST SOLST P The various wood/lacquer and highgloss versions underline the versatility of the MULTFORMA wardrobe system. You can also choose from a variety of versions for the wardrobe interior fittings for the MULTFORMA slidingdoor wardrobes:: White lacquer (Standard) Light interior veneer Dark interior veneer Please state exactly in the order, in which version you require the interior fittings for your wardrobe. f no details of the version are given in the order, the interior fittings are delivered in the standard white lacquer version. Concept/ planning possibilities Doors in Design A and M with optional mirror Optional: with top LED lamp (12 V; 2.4 W) with cornice and integrated LED spotlamps (12 V, 1 W) with cornice and integrated LED light panels (12 V, 2.7 W) The lights are operated by a standard external footswitch. Wardrobe inside widths: 78, 88, 98, 108, 118, 133, 148 cm The wardrobe outer widths are calculated by adding 2 cm to the inside widths for each partition and side section; another 1.0 cm must be added for the side protrusion when a cornice is fitted Two different basic wardrobe heights: cm and cm MULTFORMA is variable: height reductions at intervals of 1 mm, width and depth reductions at intervals of 1.0 cm without surcharge (height and width reductions not possible for SOLST and SOLST P) Wardrobe outside depth (incl. profiled handle): 67.6 cm Wardrobe inside depth: 56.0 cm Functional and highquality wardrobe interior fittings (see separate Wardrobe interior fittings chapter) Standard interior fittings: 2 fitted shelves, 1 clothes rod Quality features All wardrobe doors with cushioning mechanism and brush seals nnovative door guiderail bracket Unobtrusive 2.5 mm size holes Low plinth with trapezoidshaped brackets for simple assembly All partitions and side sections have a special plinth adjustment device which makes exact horizontal and vertical assembly much easier hülstasoftglide: Doors of slidingdoor wardrobes with aircushioned auto pullin feature 184 E Schlafen: MULTFORMA

36 Slidingdoor wardrobes Dims. without cornice with top LED lamp MULTFORMA with cornice incl. LED lamp Heights and cm see sizes without cornice cm see sizes without cornice cm Depths (incl. profiled handle) 67.6 cm 72.0 cm 71.3 cm Widths See pages Height reductions at intervals of 1 mm, width and depth reductions at intervals of 1.0 cm without surcharge; when reducing the height of doors in Design L only the top and bottom door panels are reduced in height (the middle panels always retain their original height); height and width reductions not possible for SOLST and SOLST P. Wardrobe examples for slidingdoor wardrobes; lamps Mirror fronts for doors in Design A and M at a surcharge Cornice and lamps at a surcharge Top LED lamps at a surcharge 2 different basic heights: 229.6; cm Wardrobe outside widths: 162, 182, 202, 222, 242, 272, 302, 322, 342, 362, 382, 402 cm Unit inside widths: 78, 88, 98, 108, 118, 133, 148 cm Outside depth: 67.6 cm nside depth: 56.0 cm For calculating the total width when fitting a cornice with lamp, please note the protrusion of 0.5 cm left and right! Slidingdoor wardrobe in cm height Lamps All slidingdoor wardrobes are available with an optional cornice and LED lamps or with a top LED lamp. Either one integrated LED spotlamp (12 V, 1 W), one LED light panel (12 V, 2.7 W) or one top LED lamp (12 V, 2.4 W) is fitted standard above each unit; exception: in the case of the SOLST, the cornice has no integrated LED spotlamp or LED light panel above the middle door. t is also possible to remove individual spotlamps or light panels with a price reduction. Please include a sketch in all cases. Switching is done by an external footswitch. A remote control unit is also available as an alternative, which is charged extra. The remote control unit incorporates one transmitter and one receiver which operate all the LED lamps. Extra transmitters are available against a surcharge. The footswitch is omitted when the remote control unit is employed. See page 196 for further information! Slidingdoor wardrobe in cm height E Schlafen: MULTFORMA

37 Lists of versions slidingdoor wardrobes Design versions for wardrobe doors Design A Design M Design G Design L SOLST SOLST P With the MULTFORMA slidingdoor wardrobes you can choose the carcase and the front in a different version. Please state this clearly in the order. When versions from different price groups are exchanged, the higher price group is always charged. Versions wardrobe interior fittings With the MULTFORMA slidingdoor wardrobes you can choose between three versions for the wardrobe interior fittings (exception: wardrobe interior fittings in carcases in highgloss versions always in white lacquer). The desired version must be stated in the order. f no details are given in the order, the wardrobe interior fittings are supplied in white lacquer. Model no. Ausführung Profiled handle versions MULTFORMA slidingdoor wardrobes can only be supplied with profiled handles in different optional lacquer versions (exception: slidingdoor wardrobes in Design M and slidingdoors in a wooden version always with standard aluminiumcoloured handles). Please be sure to state the required version in the order! White lacquer (Standard) Light interior veneer Dark interior veneer Wood/lacquer/highgloss versions Design A Model no. Carcase/front Profiled handle Price group Lacquer S76 S01 S63 S02 S03 Pure white lacquer White lacquer Wool white lacquer Sand lacquer Grey lacquer Pure white lacquer White lacquer Wool white lacquer Sand lacquer Grey lacquer Highgloss S05 S06 S07 S64 Highgloss pure white * Highgloss white * Highglosssand * Highglossgrau * Pure white lacquer * White lacquer * Sand lacquer * Grey lacquer * Veneer S65 S11 S12 Natural oak Light brown ash Core walnut Aluminium colour Aluminium colour Aluminium colour * The profiled handle for highgloss fronts is in matt lacquer in the matching colour. Wardrobe interior fittings for highgloss carcases always in white lacquer. Wood/lacquer/highgloss versions Design M Model no. Carcase/front Profiled handle Price group Lacquer S77 S14 S66 S15 S16 Pure white lacquer White lacquer Wool white lacquer Sand lacquer Grey lacquer Highgloss S18 S19 S20 S67 Highgloss pure white * Highgloss white * Highglosssand * Highglossgrau * Aluminium colour Veneer S68 S24 S25 Natural oak Light brown ash Core walnut * Wardrobe interior fittings for highgloss carcases always in white lacquer. 186 E Schlafen: MULTFORMA

38 Changing versions With the MULTFORMA slidingdoor wardrobes you can choose the carcase and the front in a different version. Please state this clearly in the order. When versions from different price groups are exchanged, the higher price group is always charged. MULTFORMA Wood/lacquer/highgloss versions Design G Lacquer Highgloss Veneer Model no. Carcase/front Profiled handle Price group S78 S26 S69 S27 S28 S30 S31 S32 S70 S71 S50 S51 Pure white lacquer White lacquer Wool white lacquer Sand lacquer Grey lacquer Highgloss pure white * Highgloss white * Highglosssand * Highglossgrau * Natural oak Light brown ash Core walnut Pure white lacquer White lacquer Wool white lacquer Sand lacquer Grey lacquer Pure white lacquer * White lacquer * Sand lacquer * Grey lacquer * Aluminium colour Aluminium colour Aluminium colour * The profiled handle for highgloss fronts is in matt lacquer in the matching colour. Wardrobe interior fittings for highgloss carcases always in white lacquer. Wood/lacquer/highgloss versions Design L Model no. Carcase/front Profiled handle Price group Lacquer Veneer Model no. S78 S26 S69 S27 S28 S71 S50 S51 Model no. Application Pure white lacquer White lacquer Wool white lacquer Sand lacquer Grey lacquer Natural oak Light brown ash Core walnut Application Highgloss S34 S35 S36 S72 Highgloss pure white * Highgloss white * Highgloss sand * Highgloss grau * Pure white lacquer * White lacquer * Sand lacquer * Grey lacquer * Lacquer Veneer S62 S53 S54 S55 S73 S59 S60 Pure white lacquer White lacquer Sand lacquer Grey lacquer Natural oak ** Light brown ash ** Core walnut ** * The profiled handle for highgloss fronts is in matt lacquer in the matching colour. Wardrobe interior fittings for highgloss carcases always in white lacquer. The carcase is available in all the different versions (see e.g. Design G). Please state clearly in the order! ** f the application is required in a wooden version, the side handles are always supplied in the same colour as the fronts. Wood/lacquer/highgloss versions SOLST Model no. Carcase/front Profiled handle Price group Model no. Application Lacquer Highgloss Veneer S79 S38 S74 S39 S40 S42 S43 S44 S75 S80 S81 S47 E Schlafen: MULTFORMA Pure white lacquer White lacquer Wool white lacquer Sand lacquer Grey lacquer Highgloss pure white * Highgloss white * Highglosssand * Highglossgrau * Natural oak Dark stained oak Core walnut Pure white lacquer White lacquer Wool white lacquer Sand lacquer Grey lacquer Pure white lacquer * White lacquer * Sand lacquer * Grey lacquer * Aluminium colour Aluminium colour Aluminium colour * The profiled handle for highgloss fronts is in matt lacquer in the matching colour. Wardrobe interior fittings for highgloss carcases always in white lacquer. Wood/lacquer/highgloss versions SOLST P Lacquer Highgloss Veneer Model no. Carcase/front Profiled handle Price group S82 S83 S84 S85 S86 S87 S88 S89 S90 S91 S92 S93 S94 Pure white lacquer White lacquer Wool white lacquer Sand lacquer Grey lacquer Highgloss pure white * Highgloss white * Highglosssand * Highglossgrau * Natural oak Dark stained oak Light brown ash Core walnut Pure white lacquer White lacquer Wool white lacquer Sand lacquer Grey lacquer Pure white lacquer * White lacquer * Sand lacquer * Grey lacquer * Aluminium colour Aluminium colour Aluminium colour Aluminium colour * The profiled handle for highgloss fronts is in matt lacquer in the matching colour. Wardrobe interior fittings for highgloss carcases always in white lacquer. Veneer Highgloss Lacquer Veneer S80 S81 S47 Model no. S82 S83 S84 S85 S86 S87 S88 S89 S90 S91 S92 S93 S94 Natural oak Dark stained oak Core walnut Application Pure white lacquer White lacquer Wool white lacquer Sand lacquer Grey lacquer Highgloss pure white Highgloss white Highgloss sand Highglossgrau Natural oak Dark stained oak Light brown ash Core walnut 187

39 Slidingdoor wardrobes For each project please remember to leave a 4.0 cm gap between wardrobe carcase and the ceiling and 2.0 cm at the side for assembly! Height: and cm (Heights with top LED lamp or cornice incl. LED lamp: see table page 185) Width: see table (Widths with cornice: cm each side) Depth: 67.6 cm (Depths with top LED lamp or cornice incl. LED lamp: see table page 185) nside depth: 56.0 cm nterior fittings : 2 fitted shelves, 1 clothes rod Design A Design M Lists of versions: see pages Design G Design L Height reductions at intervals of 1 mm, width and depth reductions at intervals of 1.0 cm without surcharge. When reducing the height of doors in Design L only the top and bottom door panels are reduced in height (the middle panels always retain their original height). Height and width reductions are not possible on the SOLST and SOLST P. Cornice is fulllength up to 302 cm width. Not available with passepartout unit! cm high cm high A55162 G55162 L55162 A65162 G65162 L cm high cm high A55182 G55182 L55182 A65182 G65182 L cm high cm high A55202 G55202 L55202 A65202 G65202 L cm high cm high A55222 G55222 L55222 A65222 G65222 L65222 E Schlafen: MULTFORMA

40 Slidingdoor wardrobes Height: and cm (Heights with top LED lamp or cornice incl. LED lamp: see table page 185) Width: see table (Widths with cornice: cm each side) Depth: 67.6 cm (Depths with top LED lamp or cornice incl. LED lamp: see table page 185) nside depth: 56.0 cm SOLST SOLST P top LED lamp 1 lamp Please state the versions for the wardrobe interior fittings! cornice with integrated LED spotlamps 1 spotlamp cornice with integrated LED light panels 1 lamp MULTFORMA mirror Each wardrobe door in Design A or each slidingdoor panel in Design M can be fitted with an optional mirror which is charged extra (mirrors not possible for Design G, L, SOLST and SOLST P). nformation on the energy class: see page 196 below! With SOLST the cornice has no integrated LED spotlamp above the middle door. With SOLST the cornice has no integrated LED light panel above the middle door. for Design A, M, G, L and SOLST P for Design A, for SOLST M, G, L and for SOLST for Design A for Design M SOLST P Please mark Please mark exactly in the exactly in the front sketch, or front sketch, or state in the order state in the order (from the left), (from the left), which slidingdoors are to door panels are which sliding be fitted with a to be fitted with mirror. a mirror. Surcharge for mirror per slidingdoor: mirror per slidingdoor panel: E Schlafen: MULTFORMA Please also note the functional and highquality wardrobe interior fittings as well as the special articles and possible specialsized products in the separate chapters on Wardrobe interior fittings and Special products. 189

41 Slidingdoor wardrobes nterior fittings : 2 fitted shelves, 1 clothes rod For each project please remember to leave a 4.0 cm gap between wardrobe carcase and the ceiling and 2.0 cm at the side for assembly! Height: and cm (Heights with top LED lamp or cornice incl. LED lamp: see table page 185) Width: see table (Widths with cornice: cm each side) Depth: 67.6 cm (Depths with top LED lamp or cornice incl. LED lamp: see table page 185) nside depth: 56.0 cm Design A Design M Lists of versions: see pages Design G Design L Height reductions at intervals of 1 mm, width and depth reductions at intervals of 1.0 cm without surcharge. When reducing the height of doors in Design L only the top and bottom door panels are reduced in height (the middle panels always retain their original height). Height and width reductions are not possible on the SOLST and SOLST P. Cornice is fulllength up to 302 cm width. Not available with passepartout unit! cm high cm high M cm high cm high A56242 G56242 L56242 A66242 G66242 L cm high cm high M cm high cm high A56272 G56272 L56272 A66272 G66272 L66272 E Schlafen: MULTFORMA

42 Slidingdoor wardrobes SOLST SOLST P top LED lamp 1 lamp Please state the versions for the wardrobe interior fittings! Height: and cm (Heights with top LED lamp or cornice incl. LED lamp: see table page 185) Width: see table (Widths with cornice: cm each side) Depth: 67.6 cm (Depths with top LED lamp or cornice incl. LED lamp: see table page 185) nside depth: 56.0 cm cornice with integrated LED spotlamps 1 spotlamp cornice with integrated LED light panels 1 lamp MULTFORMA mirror Each wardrobe door in Design A or each slidingdoor panel in Design M can be fitted with an optional mirror which is charged extra (mirrors not possible for Design G, L, SOLST and SOLST P). nformation on the energy class: see page 196 below! With SOLST the cornice has no integrated LED spotlamp above the middle door. With SOLST the cornice has no integrated LED light panel above the middle door. for Design A, M, G, L and SOLST P for Design A, for SOLST M, G, L and for SOLST for Design A for Design M SOLST P S56242 S66242 SP56242 SP S S3162 Please mark Please mark exactly in the exactly in the front sketch, or front sketch, or state in the order state in the order (from the left), (from the left), which slidingdoors are to door panels are which sliding be fitted with a to be fitted with mirror. a mirror. Surcharge for mirror per slidingdoor: mirror per slidingdoor panel: S56272 SP S S3182 S66272 E Schlafen: MULTFORMA SP66272 Please also note the functional and highquality wardrobe interior fittings as well as the special articles and possible specialsized products in the separate chapters on Wardrobe interior fittings and Special products. 191

43 Slidingdoor wardrobes For each project please remember to leave a 4.0 cm gap between wardrobe carcase and the ceiling and 2.0 cm at the side for assembly! Height: and cm (Heights with top LED lamp or cornice incl. LED lamp: see table page 185) Width: see table (Widths with cornice: cm each side) Depth: 67.6 cm (Depths with top LED lamp or cornice incl. LED lamp: see table page 185) nside depth: 56.0 cm nterior fittings : 2 fitted shelves, 1 clothes rod Design A Design M Lists of versions: see pages Design G Design L Height reductions at intervals of 1 mm, width and depth reductions at intervals of 1.0 cm without surcharge. When reducing the height of doors in Design L only the top and bottom door panels are reduced in height (the middle panels always retain their original height). Height and width reductions are not possible on the SOLST and SOLST P. Cornice is fulllength up to 302 cm width. Not available with passepartout unit! cm high cm high M cm high cm high A56302 G56302 L56302 A66302 G66302 L cm high cm high A57322 G57322 L57322 A67322 G67322 L cm high cm high A56332 G56332 L56332 A66332 G66332 L66332 E Schlafen: MULTFORMA

44 Slidingdoor wardrobes SOLST SOLST P top LED lamp 1 lamp Please state the versions for the wardrobe interior fittings! Height: and cm (Heights with top LED lamp or cornice incl. LED lamp: see table page 185) Width: see table (Widths with cornice: cm each side) Depth: 67.6 cm (Depths with top LED lamp or cornice incl. LED lamp: see table page 185) nside depth: 56.0 cm cornice with integrated LED spotlamps 1 spotlamp cornice with integrated LED light panels 1 lamp MULTFORMA mirror Each wardrobe door in Design A or each slidingdoor panel in Design M can be fitted with an optional mirror which is charged extra (mirrors not possible for Design G, L, SOLST and SOLST P). nformation on the energy class: see page 196 below! With SOLST the cornice has no integrated LED spotlamp above the middle door. With SOLST the cornice has no integrated LED light panel above the middle door. for Design A, M, G, L and SOLST P for Design A, for SOLST M, G, L and for SOLST for Design A for Design M SOLST P S56302 S66302 SP56302 SP S S3202 Please mark Please mark exactly in the exactly in the front sketch, or front sketch, or state in the order state in the order (from the left), (from the left), which slidingdoors are to door panels are which sliding be fitted with a to be fitted with mirror. a mirror. Surcharge for mirror per slidingdoor: mirror per slidingdoor panel: S56332 SP S S3222 S66332 E Schlafen: MULTFORMA SP66332 Please also note the functional and highquality wardrobe interior fittings as well as the special articles and possible specialsized products in the separate chapters on Wardrobe interior fittings and Special products. 193

45 Slidingdoor wardrobes For each project please remember to leave a 4.0 cm gap between wardrobe carcase and the ceiling and 2.0 cm at the side for assembly! Height: and cm (Heights with top LED lamp or cornice incl. LED lamp: see table page 185) Width: see table (Widths with cornice: cm each side) Depth: 67.6 cm (Depths with top LED lamp or cornice incl. LED lamp: see table page 185) nside depth: 56.0 cm nterior fittings : 2 fitted shelves, 1 clothes rod Design A Design M Lists of versions: see pages Design G Design L Height reductions at intervals of 1 mm, width and depth reductions at intervals of 1.0 cm without surcharge. When reducing the height of doors in Design L only the top and bottom door panels are reduced in height (the middle panels always retain their original height). Height and width reductions are not possible on the SOLST and SOLST P. Cornice is fulllength up to 302 cm width. Not available with passepartout unit! cm high cm high cm high cm high cm high cm high cm high cm high A57342 G57342 L57342 A67342 G67342 L67342 A57362 G57362 L57362 A67362 G67362 L67362 A57382 G57382 L57382 A67382 G67382 L67382 A57402 G57402 L57402 A67402 G67402 L67402 E Schlafen: MULTFORMA

46 Slidingdoor wardrobes SOLST SOLST P top LED lamp 1 lamp Please state the versions for the wardrobe interior fittings! Height: and cm (Heights with top LED lamp or cornice incl. LED lamp: see table page 185) Width: see table (Widths with cornice: cm each side) Depth: 67.6 cm (Depths with top LED lamp or cornice incl. LED lamp: see table page 185) nside depth: 56.0 cm cornice with integrated LED spotlamps 1 spotlamp cornice with integrated LED light panels 1 lamp MULTFORMA mirror Each wardrobe door in Design A or each slidingdoor panel in Design M can be fitted with an optional mirror which is charged extra (mirrors not possible for Design G, L, SOLST and SOLST P). nformation on the energy class: see page 196 below! With SOLST the cornice has no integrated LED spotlamp above the middle door. With SOLST the cornice has no integrated LED light panel above the middle door. for Design A, M, G, L and SOLST P for Design A, for SOLST M, G, L and for SOLST for Design A for Design M SOLST P Please mark exactly in the front sketch, or state in the order (from the left), which slidingdoors are to be fitted with a mirror. Please mark exactly in the front sketch, or state in the order (from the left), which slidingdoor panels are to be fitted with a mirror. Surcharge for mirror per slidingdoor: mirror per slidingdoor panel: E Schlafen: MULTFORMA Please also note the functional and highquality wardrobe interior fittings as well as the special articles and possible specialsized products in the separate chapters on Wardrobe interior fittings and Special products. 195

47 Electrical opening system for slidingdoor wardrobes Lists of versions: see pages Electrical opening system for slidingdoor wardrobes The slidingdoor wardrobes can also be fitted with an optional electrical opening system. The slidingdoor then opens or closes automatically when pushed slightly. Open slidingdoors will close automatically after approx. 2 minutes. The electrical opening system is not possible when a reversed slidingdoor wardrobe is required. The centre slidingdoor can only be opened to the left in the case of 3door slidingdoor wardrobes with electrical opening system. For each project please remember to leave a 10.0 cm gap between the wardrobe carcase and the ceiling for assembly if the electrical opening system for slidingdoor wardrobes is included! Special sizes for slidingdoor wardrobes with electrical opening system: Height reductions are possible down to max. 180 cm height. For reasons of appearance, we also do not recommend the wardrobe being reduced below eyelevel height. Width reductions are generally not possible. Depth reductions are possible for a maximum of 18 cm. Electrical opening system for 2door slidingdoor wardrobes 3040 Electrical opening system for 3door slidingdoor wardrobes 3050 Electrical opening system for 4door slidingdoor wardrobes 3060 Lamps Lamps All slidingdoor wardrobes are available with an optional cornice and LED lamps or with a top LED lamp. Either one integrated LED spotlamp (12 V, 1 W), one LED light panel (12 V, 2.7 W) or one top LED lamp (12 V, 2.4 W) is fitted standard above each unit; Exception: in the case of the SOLST, the cornice has no integrated LED spotlamp or LED light panel above the middle door. t is also possible to remove individual spotlamps or light panels with a price reduction. Please include a sketch in all cases. Switching is done by an external footswitch. A remote control unit is also available as an alternative, which is charged extra. The remote control unit incorporates one transmitter and one receiver which operate all the LED lamps. Extra transmitters are available against a surcharge. The footswitch is omitted when the remote control unit is employed. Cornice with integrated LED spotlamps each additional spotlamp type Price reduction for one spotlamp (if not required in cornice)) type This luminaire contains builtin LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V; 1 W Cornice with integrated LED light panels Surcharge per light panel type Price reduction for one light panel (if not required in cornice)) type This luminaire contains builtin LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V; 2.7 W = = = = Remote control remote control (transmitter + receiver) type 1601 = Top LED lamps each additional lamp type This luminaire contains builtin LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V; 2.4 W 3691 = extra transmitter type 1602 = extra receiver type 1603 = 196 E Schlafen: MULTFORMA

48 MULTFORMA MULTFORMA Room and niche system To enhance the competency of the range, MULTFORMA now also includes a walkin room system which incorporates all the key performance features (planning, surface versions, special sizes, etc.) of the previous carcase system. Furthermore, this room/niche system also provides a separate system of fronts. n this way, small niche combinations and even magnanimous room systems can be created individually. The tried and tested planning system from MULTFORMA involving basic and extension units has been incorporated in the room/niche system. This guarantees a simple and comfortable initiation to the range including easy planning. As a universal wardrobe system, the design of MULTFORMA enables you to combine its units with all of the units in the various hülsta Bedroom ranges and almost every type of interior style. Design idea The MULTFORMA room and niche system is only available with slidingdoors in Design A in different optional wood/lacquer and highgloss versions. The slidingdoors are fitted with a shell handle, optionally in matt or highgloss chrome. You can also choose from a variety of versions for the wardrobe fittings for the MULTFORMA room and niche system: White lacquer (Standard) Light interior veneer Dark interior veneer Please state exactly in the order, in which version you require the fittings for your wardrobe. f no details of the version are given in the order, the fittings are delivered in the standard white lacquer version. Concept/ planning possibilities Quality features Open carcase units that can all be combined at will Carcase inside widths: 38, 48, 78, 98, 158, 198 cm Carcase height: up to max cm Total depth: 59.0 cm nside depth: 56.0 cm MULTFORMA is variable: height reductions at intervals of 1 mm, width and depth reductions at intervals of 1.0 cm without surcharge Partitions and side sections with optional LED lamps; standard operation by remote control unit Corner carcase units (45 and with fully accessible corner 90 ) Slidingdoors with hidden aluminium construction manufactured from extremely solid hexagonal material Slidingdoors with cushioning device on one or both sides, incl. aluminium top and bottom guide rails All slidingdoors with cushioning bracket and brush seals nnovative door guiderail bracket Unobtrusive 2.5 mm size holes Low plinth with trapezoidshaped brackets for simple assembly All partitions and side sections have a special plinth adjustment device which makes exact horizontal and vertical assembly much easier Functional and highquality wardrobe interior fittings (see separate Wardrobe interior fittings chapter) Standard fittings: 2 fitted shelves, 1 clothes rod E Schlafen: MULTFORMA

49 Lists of versions room and niche system Design version slidingdoors Design A Versions wardrobe fittings With the MULTFORMA room and niche system you can choose between three versions for the wardrobe fittings. The desired version must be stated in the order. f no details are given in the order, the wardrobe fittings are supplied in white lacquer. Model no Version White lacquer (standard) Light interior veneer Dark interior veneer Versions of shell handle The MULTFORMA room and niche system can only be supplied with integrated shell handles, optionally in glossy or matt chrome. Please be sure to state the required version in the order! f no version is stated in the order, shell handle 037 (matt chrome) is supplied exworks. Wood/lacquer/highgloss versions Design A Model no. Carcase Design A Model no. Front * Price group Shell handle White lacquer (Standard) Light interior veneer Dark interior veneer Lacquer Highgloss R17 R01 R14 R02 R03 R05 R06 R07 R15 Pure white lacquer White lacquer Wool white lacquer Sand lacquer Grey lacquer Highglosspure white Highglosswhite Highglosssand Highglossgrey 037 Matt chrome (standard handle) 038 Glossy chrome Veneer R16 R11 R12 Natural oak Light brown ash Core walnut * Slidingdoors are surrounded by aluminium profiles at the sides. 198 E Schlafen: MULTFORMA

50 Room and niche system Room situations MULTFORMA Room situations Examples of use/floorplans With the MULTFORMA room and niche system it is possible to fit out the units individually according to their particular use in the home. Different room arrangements, for example for niches or sloping ceilings, can be designed practically. Rooms can even be divided or a walkin wardrobe can be created: the possible uses of the MULTFORMA room and niche system are almost unlimited! Niche Walkin wardrobe Room divider E Schlafen: MULTFORMA

51 Technical notes on room and niche system f the onsite situation has been clarified (also see the following page), the required dimensions must be calculated. The situation/view is the key here. View 1 rightangled View 2 with 1 or 2 slopes 1.) Floor Example 1 Floor absolutely horizontal = everything O.K. Example 2 Floor (with absolutely horizontal ceiling) has max. 8 mm height difference per metre length = everything O.K. Example 3 Floor has more than 8 mm height difference per metre length = this difference must be equalised effectively onsite. f both the floor and ceiling betray differences in height, the sum of these height differences per metre length must not exceed 8 mm. O.K. O.K. Not O.K.: Difference must be balanced effectively onsite 2.) Ceiling Example 4 Ceiling absolutely horizontal = everything O.K. Example 5 Ceiling (with absolutely horizontal floor) has max. 8 mm height difference per metre length = everything O.K. Example 6 Ceiling has more than 8 mm height difference per metre length = a ceiling fitting profile must be ordered. f both the floor and ceiling betray differences in height, the sum of these height differences per metre length must not exceed 8 mm. O.K. O.K. Not O.K.: A ceiling fitting profile must be ordered (see page 207) 3.) Walls Example 7 Walls absolutely vertical = everything O.K. Example 8 Walls are not vertical = wall fitting profiles must be ordered 200 O.K. Not O.K.: Wall fitting profiles must be ordered (see page 207) E Schlafen: MULTFORMA

52 MULTFORMA Measuring heights Measuring widths Measuring sloping ceilings Width 1 Width 3 Length 1 Height 1 Height 2 Height 3 Please measure height 1 and height 3 in each corner Width 2 Height 1 Width 2 Height 2 Height 3 Width 3 Width 1 Please state all measurements in millimetres. Warm corners must be straightened onsite before measuring. Please always check all walls for quality and to see if they are exactly straight. The onsite situation must be checked before you can calculate the individual sizes of the furniture units. 1.) Floor Maximum tolerances max. 8 mm on 1 m max. 16 mm on 2 m max. 24 mm on 3 m max. 32 mm on 4 m The floor must be checked to see if it is horizontal using a spirit level. An absolutely horizontal floor (see example 1) is best. The MULTFORMA room and niche system, however, will permit height differences in the floor of a maximum 8 mm per 1 m length (i.e. 16 mm for a max. width of 2 m, 24 mm for a max. width of 3 m, etc.; see example 2). The various maximum tolerances cannot be added up. f the maximum tolerance value of 8 mm per 1 m length is exceeded (see example 3), this difference must be equalised suitably onsite. Please be sure to state in your order what the floor material is. On solid floors (e.g. on tiles, parquet flooring, laminate) the floor rail with the runner bracket is fitted directly on to the floor. n the case of soft floors, like for example carpets, these must be cut out onsite and the floor rails must then be laid. The floor rail with the running bracket is always supplied in oversize and has to be cut to requirements on site. 2.) Ceiling The ceiling must be checked to see if it is horizontal using a spirit level. An absolutely horizontal ceiling (see example 4) is best. The MULTFORMA room and niche system, however, will permit height differences in the ceiling of a maximum 8 mm per 1 m length (i.e. 16 mm for a max. width of 2 m, 24 mm for a max. width of 3 m, etc.; see example 5). The various maximum tolerances cannot be added up. f the maximum tolerance value of 8 mm per 1 m length is exceeded, a ceiling fitting profile must be ordered (against a surcharge; see example 6 and page 207). Height of ceiling fitting profile: 50 mm. t can be adjusted by 25 mm (i.e. max. 75 mm high). When using the fitting profile, please state the true ceiling height. Slight irregularities in the ceiling surface, warping, etc. must be equalised during assembly (e.g. with acrylic material). The fitting profile is mounted on the ceiling. t is always supplied in oversize and has to be cut to requirements on site. 3.) Walls The walls must be checked to see if they are vertical using a spirit level. The walls must be absolutely vertical (see example 7). f they are not, wall fitting profiles must be ordered (against a surcharge; see example 8 and page 207). Width of wall fitting profile: 50 mm. t can be adjusted by 25 mm (i.e. max. 75 mm wide). Slight irregularities in the walls, warping, etc. must be equalised during assembly (e.g. with acrylic material). mportant notes: Generally speaking, you as a dealer/qualified fitter are responsible for the correct wall mounting of the units. That is why wall mounting should only be carried out by properly trained and qualified fitters. hülsta supplies materials for mounting units on walls for nearly all the units and which should be used for safety and for constructional reasons. The assembly materials supplied by hülsta (plugs, screws) are only suitable for fitting components on to concrete in firmness class (C12/15). For other materials (please see separate materials table in the wall composition chapter) we provide you with an assembly mortar set as an extra order. Please note that this assembly mortar set is also only suitable for the materials listed in the materials table. f walls are made up of other materials (e.g. plastered or lighter wall materials), one should use another method of mounting better suited to the load on site. Please note that if the units are not mounted properly on the wall, there is a risk of the units falling down or tipping over especially when alternative mounting materials acquired on site have been used. For the reasons stated above it is absolutely essential to enquire about the composition of any walls before signing any contracts. E Schlafen: MULTFORMA

53 Room and niche system For each project please remember to leave a 2.0 cm gap to the ceiling and at the side for assembly! List of versions: see page 198 Height: max cm Height reductions at intervals of 1 mm, width and depth reductions at intervals of 1.0 cm without surcharge. Width: see table Total depth: 59.0 cm nside depth: 56.0 cm Open carcase basic units with 2 outer sidesections (each 2 cm thick) nterior fittings : 2 fitted shelves, 1 clothes rod Open carcase units optionally in white lacquer (standard), light interior veneer or dark interior veneer. Please state clearly in the order! For each wardrobe combination, the first element on the left is considered to be the basic unit, incorporating both outer sidesections. One can only include one basic unit in each combination. When adding on extension units, the righthand sidesection of the basic unit is employed as the end sidesection of the complete combination. Please also note the functional and highquality wardrobe interior fittings as well as the special articles and possible specialsized products in the separate chapters on Wardrobe interior fittings and Special products. Open carcase unit, 42 cm wide Open carcase unit, 162 cm wide max cm high max cm high Open carcase unit, 52 cm wide Open carcase unit, 202 cm wide max cm high max cm high Open carcase unit, 82 cm wide Open carcase unit with fully accessible corner 90, x cm wide max cm high 208 Lefthand type (L): left 2 fitted shelves and 1 clothes rod, each cm wide; right 2 fitted shelves and 1 clothes rod, each 52.5 cm wide Righthand type (R): interior fittings in reverse order For production we require the details of series of assembly from left to right. L max cm high L R Open carcase unit, 102 cm wide Open corner carcase unit 45, 97.3 x 97.3 cm wide 202 max cm high nterior fittings: 1 fitted shelf without clothes rod 1 fitted shelf with clothes rod For production we require the details of series of assembly from left to right. max cm high E Schlafen: MULTFORMA

54 Room and niche system MULTFORMA Height: max cm Height reductions at intervals of 1 mm, width and depth reductions at intervals of 1.0 cm without surcharge. Width: see table Total depth: 59.0 cm nside depth: 56.0 cm Open carcase extension units with 1 centre partition (2 cm thick) nterior fittings : 2 fitted shelves, 1 clothes rod Open carcase units optionally in white lacquer (standard), light interior veneer or dark interior veneer. Please state clearly in the order! For each wardrobe combination, the first element on the left is considered to be the basic unit, incorporating both outer sidesections. One can only include one basic unit in each combination. When adding on extension units, the righthand sidesection of the basic unit is employed as the end sidesection of the complete combination. Please also note the functional and highquality wardrobe interior fittings as well as the special articles and possible specialsized products in the separate chapters on Wardrobe interior fittings and Special products. Open carcase unit, 40 cm wide Open carcase unit, 160 cm wide max cm high max cm high Open carcase unit, 50 cm wide Open carcase unit, 200 cm wide max cm high max cm high Open carcase unit, 80 cm wide Open carcase unit with fully accessible corner 90, x cm wide max cm high 0208 Lefthand type (L): left 2 fitted shelves and 1 clothes rod, each cm wide; right 2 fitted shelves and 1 clothes rod, each 52.5 cm wide Righthand type (R): interior fittings in reverse order For production we require the details of series of assembly from left to right. L max cm high L R Open carcase unit, 100 cm wide Open corner carcase unit 45, 95.3 x 97.3 cm wide E Schlafen: MULTFORMA max cm high nterior fittings: 1 fitted shelf without clothes rod 1 fitted shelf with clothes rod For production we require the details of series of assembly from left to right. max cm high 203

55 Room and niche system List of versions: see page 198 for hard floors (e.g. tiles, parquet) Height: max cm; Height reductions at intervals of 1 mm, width and depth reductions at intervals of 1.0 cm without surcharge. Width: see table Fronts Slidingdoors Fronts: 3.5 cm thick Slidingdoors with cushioning bracket at one or both sides (depending on width of slidingdoors); incl. top and bottom guide rails (aluminium profile): The guide rails are always supplied in oversize and have to be cut to requirements on site The top guide rail must be screwed onto the ceiling and the bottom guide rail fixed (glued) to the floor A ceiling fitting profile is always used for sloping ceilings (possible from 30 ) Design A mirror: Each slidingdoor can be fitted with an optional mirror which is charged extra. with door cushioning one side with door cushioning both sides Front incl. top and bottom guide rails 1 slidingdoor Front width: min cm, max cm Required total width: min cm, max cm Singlerail Front incl. top and bottom guide rails 2 slidingdoors Front width and required total width: min cm, max cm Twinrail Front incl. top and bottom guide rails 3 slidingdoors Front width and required total width: min cm, max cm Twinrail Front incl. top and bottom guide rails 3 slidingdoors Front width and required total width: min cm, max cm Triplerail Front incl. top and bottom guide rails 4 slidingdoors Front width and required total width: min cm, max cm Twinrail L L/R = left/right max cm high max cm high max cm high max cm high max cm high Front width from 60.0 to 93.0 cm from 93.1 to cm Total width from to cm from to cm Front and total width Front and total width Front and total width Front and total width A2181 L A2182 R from to cm A2230 from to cm A2345 from to cm A2372 from to cm A2460 A3181 L A3182 R from to cm A3230 from to cm A3345 from to cm A3372 from to cm A3460 Please mark exactly in the front sketch, or state in the order (from the left), which slidingdoors are to be fitted with a mirror. mirror per Slidingdoor: 204 mportant notes: Generally speaking, you as a dealer/qualified fitter are responsible for the correct wall mounting of the units. That is why wall mounting should only be carried out by properly trained and qualified fitters. hülsta supplies materials for mounting units on walls for nearly all the units and which should be used for safety and for constructional reasons. The assembly materials supplied by hülsta (plugs, screws) are only suitable for fitting components on to concrete in firmness class (C12/15). For other materials (please see separate materials table in the wall composition chapter) we provide you with an assembly mortar set as an extra order. Please note that this assembly mortar set is also only suitable for the materials listed in the materials table. f walls are made up of other materials (e.g. plastered or lighter wall materials), one should use another method of mounting better suited to the load on site. Please note that if the units are not mounted properly on the wall, there is a risk of the units falling down or tipping over especially when alternative mounting materials acquired on site have been used. For the reasons stated above it is absolutely essential to enquire about the composition of any walls before signing any contracts. E Schlafen: MULTFORMA

56 Room and niche system for carpets MULTFORMA Height: max. 273,0 cm; Height reductions at intervals of 1 mm, width and depth reductions at intervals of 1.0 cm without surcharge. Width: see table Fronts Slidingdoors Fronts: 3.5 cm thick Slidingdoors with cushioning bracket at one or both sides (depending on width of slidingdoors); incl. top and bottom guide rails (aluminium profile): The guide rails are always supplied in oversize and have to be cut to requirements on site The top guide rail must be screwed onto the ceiling and the bottom guide rail fixed (glued) to the floor A ceiling fitting profile is always used for sloping ceilings (possible from 30 ) Please note: The carpet must be cut out to requirements on site and the bottom guide rail fitted. Design A mirror: Each slidingdoor can be fitted with an optional mirror which is charged extra. with door cushioning one side with door cushioning both sides Front incl. top and bottom guide rails 1 slidingdoor Front width: min cm, max cm Required total width: min cm, max cm Singlerail Front incl. top and bottom guide rails 2 slidingdoors Front width and required total width: min cm, max cm Twinrail Front incl. top and bottom guide rails 3 slidingdoors Front width and required total width: min cm, max cm Twinrail Front incl. top and bottom guide rails 3 slidingdoors Front width and required total width: min cm, max cm Triplerail Front incl. top and bottom guide rails 4 slidingdoors Front width and required total width: min cm, max cm Twinrail L L/R = left/right max cm high max cm high max cm high max cm high max cm high Front width Total width Front and total width Front and total width Front and total width Front and total width from 60.0 to 93.0 cm from to cm A21811 L A21812 R from to cm A22301 from to cm A23451 from to cm A23721 from to cm A24601 from 93.1 to cm from to cm A31811 L A31812 R from to cm A32301 from to cm A33451 from to cm A33721 from to cm A34601 Please mark exactly in the front sketch, or state in the order (from the left), which slidingdoor panels are to be fitted with a mirror. mirror per Slidingdoor: mportant notes: Generally speaking, you as a dealer/qualified fitter are responsible for the correct wall mounting of the units. That is why wall mounting should only be carried out by properly trained and qualified fitters. hülsta supplies materials for mounting units on walls for nearly all the units and which should be used for safety and for constructional reasons. The assembly materials supplied by hülsta (plugs, screws) are only suitable for fitting components on to concrete in firmness class (C12/15). For other materials (please see separate materials table in the wall composition chapter) we provide you with an assembly mortar set as an extra order. Please note that this assembly mortar set is also only suitable for the materials listed in the materials table. f walls are made up of other materials (e.g. plastered or lighter wall materials), one should use another method of mounting better suited to the load on site. Please note that if the units are not mounted properly on the wall, there is a risk of the units falling down or tipping over especially when alternative mounting materials acquired on site have been used. For the reasons stated above it is absolutely essential to enquire about the composition of any walls before signing any contracts. E Schlafen: MULTFORMA

57 Room and niche system List of versions: see page 198 Lamps LED lamp for partitions and outer side sections for fitting on partitions or outer side sections of open carcase units. n this case the total depth increases by 2.5 cm. The LED lamps are fitted all along the front of the carcase sides and shine to the side (when fitted on outer side sections they shine to one side, when fitted on partitions to both sides). This luminaire contains builtin LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V; 7 or 14 W, incl. remote control unit Please also note the functional and highquality wardrobe interior fittings as well as the special articles and possible specialsized products in the separate chapters on Wardrobe interior fittings and Special products. llustration: LED lamp on partition (illuminates both sides) LED lamp for fitting on outer side sections; 7 W LED lamp for fitting on partitions; 14 W E Schlafen: MULTFORMA

58 Room and niche system MULTFORMA Wall or ceiling fitting profile Wall or ceiling fitting profile Fitting profiles must be used for each wall and/or ceiling if the walls are not exactly vertical and/or the ceiling not straight and they exceed the maximum tolerance of 8 mm per 1 m length (also see page 201). The illustrated fitting profile is used both for the walls as well as for the ceiling. The fitting profiles are used to equalise the distance between the top and bottom guide rails to the wall and between the top guide rail to the ceiling. They are always supplied in oversize and have to be cut to requirements on site. They are charged per 10 cm metre length or part thereof. Fitting profiles must be ordered for each wall and ceiling that is not straight (beyond the maximum tolerances). Height of fitting profile: 50 mm. t can be adjusted by 25 mm (i.e. max. 75 mm high). When using the fitting profiles, please state the true ceiling height! Wall or ceiling fitting profile Examples of use Equalising distance to wall 5075 mm Fitting profile Top guide rail 5075 mm Door Equalising height to ceiling Wall or ceiling fitting profile Price per 10 cm length or part thereof 5075 mm Singlerail Twinrail Triplerail , Side sloping Every slidingdoor in the room and niche system can be sloped at the side. The following points must be noted: f width A (see sketch 1) exceeds/equals 55.0 cm, the door is still supplied as a slidingdoor side sloping per slidingdoor (as slidingdoor) Type f width A (see sketch 2) is less than 55.0 cm, the door is supplied as a fixed unit sidesloping per slidingdoor (as fixed unit) f width A (see sketch 3) is less than 55.0 cm but the door is still meant to be used as a slidingdoor a support rail and fitted shelves must be ordered extra. This rail can only be fitted on the front side of open carcase units in front of a fulllength row of fitted shelves. n this case the slidingdoor can not be used as a room divider. The support rail is charged per 10 cm length or part thereof. One fitted shelf must be ordered for every open carcase unit included. A onesided cushioning bracket is used up to 55.0 cm width A. side sloping of slidingdoor support rail (per 10 cm length or part thereof) fitted shelf (per each open carcase unit) We recommend getting in touch with hülsta before ordering in order to sort out technical details. Type Type Type Type Sketch 1 Sketch 2 Sketch 3 A A A E Schlafen: MULTFORMA

59 Link to the assembly / user instruction movies Wardrobe interior fittings With these highquality interior fittings for wardrobes hülsta has developed a system that meets every individual furnishing needs. The great number of different unit types, a wide spectrum of sizes, as well as a variety of surface versions underline the great versatility and variability available. The wardrobe interior fittings can be used in every kind of wardrobe hingedoor, foldingdoor and slidingdoor wardrobes as well as in the MULTFORMA room system. There are many different sets of drawers for quick and easy planning. Contents Page Functional units A multitude of functional components are the main features of the wardrobe interior fittings: Range introduction, list of versions 238 Fitted shelves, protective mat 239 Centre partition kits, clothes lift 240 Clothes rods, tie holders, trouser holders, inside mirror, fabric boxes 241 mportant notes on fitting drawers in wardrobes Sets of drawers Fitting at any level Accessories 249 Cover for sets of drawers 250 Wardrobe interior fittings in special width 251 Fitted shelves for straight and profiled units, also for panorama units and corner units Clothes rods for straight units and corner units LED illuminated shelves for straight units and hingedoor corner wardrobe, with automatic switch Centre partition kits and clothes lift Tie and trouser holders, also extendable nside mirror for fitting on inside of wardrobe doors Fabric boxes Drawers For optimal use of wardrobes, all the drawers are available as single units or in sets. Because they can be fitted at any level it is possible to design wardrobe interior fittings individually. Drawers with wooden or glass front and shoe drawer Compartment for ties or linen for drawers with glass front Sets of drawers composed differently and made up of the units stated above For fitting at any level with carcases, different drawers and accessories Quality features hülstasoftflow: All drawers on hidden roller bearings with auto pullin feature with brake as fully pullout units Tie holder in highquality chrome version Drawer frames in standard grey Simple assembly due to the use of special brackets All inside surfaces have a side distance piece to ensure easy opening when the doors are open All wooden components optionally in different versions List of versions Model no. Versions White lacquer Light interior veneer Dark interior veneer Please state in the order the name and the model number of the range which the wardrobe interior fittings are intended for. Handle versions The drawer handles for the wardrobe interior fittings are delivered standard in the same version as the wardrobe door handles in which the interior fittings are incorporated (highgloss chrome or matt chrome). f the wardrobe door handles are required in wood or lacquer versions, please state the version of the drawer handles for the interior fittings clearly in the order! 238 E Schlafen: nnenausstattung Seite

60 Wardrobe interior fittings WARDROBE NTEROR FTTNGS for wardrobe inside widths Type no. Fitted shelves 2.3 cm thick (2.6 cm thick, including support strut for 118 to 198 cm width) 28 cm wide components only in combination with centre partition kit for straight units 28 cm 38 cm 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm 118 cm 128 cm 133 cm 138 cm 148 cm 158 cm 198 cm L for profiled end units from MULTFORMA 48 cm 98 cm L R L R Fitted corner shelf for 45 corner unit, 2.3 cm thick without clothes rod with clothes rod NEW LED illuminated shelf 2.9 cm thick; with LEDlamp This luminaire contains builtin LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V; 11.0 W for straight units 98 cm LED illuminated shelf 2.9 cm thick; with LEDlamp; with automatic switch and motion detector We do not recommend fitting these illuminated shelves in the MULTFORMA room system. This luminaire contains builtin LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V; W for straight units for hingedoor corner wardrobe without clothes rod with clothes rod 38 cm 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm 118 cm 128 cm 133 cm 138 cm 148 cm 158 cm 198 cm Presentation shelf 2.3 cm thick; with extra slat on the front rim, 6.0 cm high Fitted height: approx cm when fitted at an angle for straight units 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm Protective mat of silvercoloured plastic; for presentation shelves for straight units E Schlafen: nnenausstattung Seite L/R = left/right 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm

61 Wardrobe interior fittings List of versions: see page 238 for wardrobe inside widths Type no. Centre partition kit for wardrobes with unit inside widths of 78, 88 and 98 cm, consisting of: 1 centre partition (153.0 cm high); 2 constructional shelves 48 cm wide (fitted optionally left or right) for 78 cm width: for 88 cm width: for 98 cm width: 48 cm wide compartment with 2 constructional shelves; 28 cm open compartment 48 cm wide compartment with 2 constructional shelves; 38 cm open compartment 48 cm wide compartment with 2 constructional shelves; 48 cm open compartment Additional extras: 28, 38, 48 cm wide fitted shelves, clothes rods as well as 48 cm wide drawers and sets f the centre partition kit is fitted in the MULTFORMA room system, please add a "1" to the type number (e.g ). Please state clearly in the order! 1 Raster high Total height: 22.2 cm 138 cm 158 cm 198 cm Centre partition kit for hinge and foldingdoor wardrobes as well as for open carcase units of the MULTFORMA room system with unit inside widths of 138, 158 and 198 cm, consisting of: 1 centre partition (always in centre under constructional shelf) and 1 constructional shelf for 138 cm width: two 68 cm wide compartments for 158 cm width: two 78 cm wide compartments for 198 cm width: two 98 cm wide compartments 2 Raster high Total height: 41.4 cm 3 Raster high Total height: 60.6 cm 138 cm 158 cm 198 cm 138 cm 158 cm 198 cm Drawers and sets must be fitted in the centre partition kit (see pages ). The standard cover shelves of the sets of drawers are deducted from the price. 4 Raster high Total height: 79.8 cm 138 cm 158 cm 198 cm Raster high Total height: 99.0 cm 138 cm 158 cm 198 cm Clothes lift Twinarm, aluminiumcoloured, swingout clothes rod with brake mechanism Max. load: 10 kg for hingedoor wardrobes for folding and slidingdoor wardrobes 68 cm 78 cm 98 cm 108 cm 78 cm 88 cm 98 cm 108 cm 118 cm E Schlafen: nnenausstattung Seite

62 Wardrobe interior fittings WARDROBE NTEROR FTTNGS for wardrobe inside widths Type no. Clothes rod chrome, uniform tubular metal with two supports 28 cm wide components only in combination with centre partition kit for straight units or for profiled end units 28 cm 38 cm 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm 118 cm 128 cm 133 cm 138 cm 148 cm 158 cm 198 cm Extendable tie holder chrome, fitted on clothes rod and rear wall of wardrobe carcase for 22 ties 21.3 cm high, 11.6 cm wide, 50.0 cm deep Extendable tie holder chrome, fitted on the inner side of wardrobe carcase for 17 ties 13.0 cm high, 9.0 cm wide, 54.0 cm deep Tie holder chrome, fitted on the left inner side of wardrobe carcase for 18 ties 29.5 cm high, 25.0 cm wide, 8.0 cm deep Tie holder chrome, fitted on the inner side of hingedoors for 3 ties 1.3 cm high, 26.0 cm wide, 5.0 cm deep Extendable trouser holder chrome, fitted on the inner side of wardrobe carcase for 3 pairs of trousers 26.0 cm high, 50.5 cm wide, 7.5 cm deep nside mirror fitted on the inner side of and cm high as well as 40 and 50 cm wide, straight hingedoors Please state clearly in the order which hingedoors are to be fitted with an inside mirror The inside mirror cannot be fitted in MULTFORMA wardrobes in design F and F plus. E Schlafen: nnenausstattung Seite Fabric boxes with leather grip; colours: black or sand 33.0 cm wide, 50.0 cm deep black sand 8 cm high 16 cm high 24 cm high 8 cm high 16 cm high 24 cm high

63 Wardrobe interior fittings mportant notes on fitting drawers in wardrobes List of versions: see page 238 Additional accessories (e.g. drawers, sets of drawers, etc.; see pages ) can be fitted in hinge, folding and slidingdoor wardrobes as well as in the MULTFORMA room system. These accessories must always be fitted on both sides of the wardrobe side sections or centre partitions, i.e. the accessories have the same width as the inside width of the appropriate wardrobe unit (see examples 1 and 36). t is, however, also possible to fit standalone accessories fitted at one side only. n this case, a cover for a set of drawers must be ordered extra (see examples 2, 7 and 8). t is not possible to fit accessories that stand alone at both sides! We differentiate between accessories for hingedoor wardrobes and for the MULTFORMA room system as well as accessories for foldingand slidingdoor wardrobes in the wardrobe interior fittings. Drawers in the accessories for hingedoor wardrobes and for the MULTFORMA room system are fitted with narrow sidesupport panels at both sides (see each of the lefthand wardrobe units in examples 1 and 2). Since folding or slidingdoors cannot be opened at the sides as far as hingedoors for constructional reasons, the accessories for folding and slidingdoor wardrobes are fitted with a narrow support panel at one side and with a wide support panel at the other side. That is why the accessories for folding and slidingdoor wardrobes are divided into accessories as "accessories left" = L (i.e. the wide sidesupport panel is fitted on the lefthand side of the accessory), and "accessories right" = R (i.e. the wide sidesupport panel is fitted on the righthand side of the accessory). With foldingdoor wardrobes, the wide support panel of the accessory must be fitted on the side of the foldingdoor unit where the foldingdoors are mounted (see each of the middle and righthand wardrobe units in examples 1 and 2 as well as example 3). Please note: A sideward distance of up to a max. 5 cm must be kept to the side wall so that the foldingdoors can be opened widely enough. The space depends on the intended handle. We recommend getting advice from hülsta if necessary. With 2 and 4door slidingdoor wardrobes, the wide support panel of the accessory must always be fitted on the inside of the slidingdoor unit (see examples 4 and 6). The same applies to the outside units of a 3door slidingdoor wardrobe. The accessory of the middle unit must always be fitted with the wide support panel on the left (see example 5). f the accessory is fitted as a standalone unit at one side with a cover for a set of drawers (see examples 2, 7 and 8), the same applies as described above. f 2 sets of drawers are fitted adjacently please use the centre partition kit shown on page 240 (see example 3). The standard cover shelves of the sets of drawers are deducted from the price. Please note: The sketches on pages show the accessories for hingedoor wardrobes (i.e. with narrow sidesupport panels at both sides)! Example 1 Hinge/foldingdoor wardrobe Example 2 Hinge/foldingdoor wardrobe L R L R A B B A: Accessory in hingedoor unit with narrow support panels at both sides B: Accessory in foldingdoor unit with wide support panel at the side, where the door is mounted C D D C: Accessory, standalone at one side, in hingedoor unit with narrow support panels at both sides D: Accessory in foldingdoor unit, stand alone, at one side, with wide support panel at the side, where the door is mounted 242 L/R = Support panel left/right E Schlafen: nnenausstattung Seite

64 Wardrobe interior fittings Example 3 Foldingdoor wardrobe: Panorama unit with 5 Raster high centre partition kit Example 4 2door slidingdoor wardrobe WARDROBE NTEROR FTTNGS L R R L E E F F E: Accessory in foldingdoor wardrobe with wide support panel at the side, where the door is mounted F: Accessory in slidingdoor wardrobe with wide support panel at the side on the inside of the slidingdoor unit Example 5 3door slidingdoor wardrobe Example 6 4door slidingdoor wardrobe R L L R L R L G: Accessory in slidingdoor wardrobe with wide support panel at the side on the inside of the slidingdoor unit H: Accessory in slidingdoor wardrobe in the centre unit with a standard wide support panel on the lefthand side Example 7 2door slidingdoor wardrobe G H G : Accessory in slidingdoor wardrobe with wide support panel at the side on the inside of the slidingdoor unit J: Accessory in slidingdoor wardrobe in the lefthand centre unit with a standard wide support panel on the lefthand side K: Accessory in slidingdoor wardrobe in the righthand centre unit with a standard wide support panel on the righthand side Example 8 4door slidingdoor wardrobe J K R R R L L R L M N O P Q L: Accessory, standalone at one side, in slidingdoor wardrobe with wide support panel at the side on the inside of the slidingdoor unit M: Since the accessory in the righthand unit of the slidingdoor wardrobe is mounted as a standalone unit on the side and does not reach as far as the inside wall of the slidingdoor unit, the wide support panel can also be fitted on the outer side wall of the slidingdoor unit. E Schlafen: nnenausstattung Seite L/R = Support panel left/right N: Accessory, standalone at one side, in slidingdoor wardrobe with wide support panel at the side on the inside of the slidingdoor unit O: Accessory, standalone at one side, in slidingdoor wardrobe in the lefthand centre unit with a standard wide support panel on the lefthand side P: Accessory, standalone at one side, in slidingdoor wardrobe in the righthand centre unit with a standard wide support panel on the righthand side Q: Since the accessory in the righthand unit of the slidingdoor wardrobe is mounted as a standalone unit on the side and does not reach as far as the inside wall of the slidingdoor unit, the wide support panel can also be fitted on the outer side wall of the slidingdoor unit. 243

65 Wardrobe interior fittings List of versions: see page 238 Sets of drawers Sets of drawers as a complete unit consisting of top cover shelf, block sides and different drawers. f sets of drawers are stacked, the cover shelf of the bottom set of drawers is omitted and can be deducted from the price. A cover for a set of drawers must be fitted for mounting the units as standalone units at one side. f 2 sets of drawers are fitted adjacently please use the centre partition kit (see page 240). For fitting at any level and accessories: see pages ! Please state clearly in the order if the sets are to be fitted in a hingedoor wardrobe or in the MULTFORMA room system! for wardrobe inside widths Type no. for hingedoor wardrobes and MULTFORMA room system Type no. for folding and slidingdoor wardrobes Set 1 1 drawer with wooden front Total height: 21.5 cm 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm L L L L L L R R R R R R Set 2 1 drawer with glass front Total height: 21.5 cm 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm L L L L L L R R R R R R Set 3 1 shoe drawer Total height: 40.7 cm 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm L L L L R R R R Set 4 2 drawers with wooden front Total height: 40.7 cm 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm L L L L L L R R R R R R Set 5 1 drawer with glass front 1 drawer with wooden front Total height: 40.7 cm 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm L L L L L L R R R R R R Set 6 2 drawers with glass front Total height: 40.7 cm 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm L L L L L L R R R R R R 244 L/R = left/right (see here pages ) E Schlafen: nnenausstattung Seite

66 Wardrobe interior fittings WARDROBE NTEROR FTTNGS Sets of drawers Sets of drawers as a complete unit consisting of top cover shelf, block sides and different drawers. f sets of drawers are stacked, the cover shelf of the bottom set of drawers is omitted and can be deducted from the price. A cover for a set of drawers must be fitted for mounting the units as standalone units at one side. f 2 sets of drawers are fitted adjacently please use the centre partition kit (see page 240). For fitting at any level and accessories: see pages ! Please state clearly in the order if the sets are to be fitted in a hingedoor wardrobe or in the MULTFORMA room system! for wardrobe inside widths Type no. for hingedoor wardrobes and MULTFORMA room system Type no. for folding and slidingdoor wardrobes Set 7 3 drawers with wooden front Total height: 59.9 cm 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm L L L L L L R R R R R R Set 8 1 drawer with glass front 2 drawers with wooden front Total height: 59.9 cm 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm L L L L L L R R R R R R Set 9 2 drawers with glass front 1 drawer with wooden front Total height: 59.9 cm 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm L L L L L L R R R R R R Set 10 1 drawer with wooden front 1 shoe drawer Total height: 59.9 cm 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm L L L L R R R R Set 11 4 drawers with wooden front Total height: 79.1 cm 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm L L L L L L R R R R R R Set 12 1 drawer with glass front 3 drawers with wooden front Total height: 79.1 cm 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm L L L L L L R R R R R R Set 13 2 drawers with glass front 2 drawers with wooden front Total height: 79.1 cm 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm L L L L L L R R R R R R E Schlafen: nnenausstattung Seite L/R = left/right (see here pages ) 245

67 Wardrobe interior fittings List of versions: see page 238 Sets of drawers Sets of drawers as a complete unit consisting of top cover shelf, block sides and different drawers. f sets of drawers are stacked, the cover shelf of the bottom set of drawers is omitted and can be deducted from the price. A cover for a set of drawers must be fitted for mounting the units as standalone units at one side. f 2 sets of drawers are fitted adjacently please use the centre partition kit (see page 240). For fitting at any level and accessories: see pages ! Please state clearly in the order if the sets are to be fitted in a hingedoor wardrobe or in the MULTFORMA room system! for wardrobe inside widths Type no. for hingedoor wardrobes and MULTFORMA room system Type no. for folding and slidingdoor wardrobes Set 14 5 drawers with wooden front Total height: 98.3 cm 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm L L L L L L R R R R R R Set 15 1 drawer with glass front 4 drawers with wooden front Total height: 98.3 cm 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm L L L L L L R R R R R R Set 16 2 drawers with glass front 3 drawers with wooden front Total height: 98.3 cm 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm L L L L L L R R R R R R Cover for sets of drawers The cover for sets of drawers is necessary when sets of drawers are fitted as standalone units at one side in the wardrobe (example: a 48 cm wide set is fitted in a wardrobe with an inside width of 98 cm so that one side of the set is fitted on the interior side of the wardrobe and the other side of the set stands alone in the wardrobe centre). See here page 250! 246 L/R = left/right (see here pages ) E Schlafen: nnenausstattung Seite

68 Wardrobe interior fittings WARDROBE NTEROR FTTNGS Fitting at any level Besides being able to fit complete sets of drawers, it is also possible to plan wardrobe interior fittings individually. All carcases, consisting of the top cover shelf and block sides, can be fitted individually with different drawers. A cover for a set of drawers must be fitted for mounting the units as standalone units at one side in a wardrobe. f 2 carcases are fitted adjacently, the centre partition kit must be used (see page 240). Complete sets of drawers: see pages ! Accessories: see page 249! Please state clearly in the order if the carcases are to be fitted in a hingedoor wardrobe or in the MULTFORMA room system! for wardrobe inside widths Type no. for hingedoor wardrobes and MULTFORMA room system Type no. for folding and slidingdoor wardrobes 1 Raster carcase Total height: 21.5 cm 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm L L L L L L R R R R R R 2 Raster carcase Total height: 40.7 cm 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm L L L L L L R R R R R R 3 Raster carcase Total height: 59.9 cm 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm L L L L L L R R R R R R 4 Raster carcase Total height: 79.1 cm 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm L L L L L L R R R R R R 5 Raster carcase Total height: 98.3 cm 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm L L L L L L R R R R R R Cover for sets of drawers The cover for sets of drawers is necessary when carcases are fitted as standalone units at one side in the wardrobe (example: a 48 cm wide carcase is fitted in a wardrobe with an inside width of 98 cm so that one side of the carcase is fitted on the interior side of the wardrobe and the other side of the carcase stands alone in the wardrobe centre). See here page 250! E Schlafen: nnenausstattung Seite L/R = left/right (see here pages ) 247

69 Wardrobe interior fittings List of versions: see page 238 Fitting at any level Besides being able to fit complete sets of drawers, it is also possible to plan wardrobe interior fittings individually. All carcases, consisting of the top cover shelf and block sides, can be fitted individually with different drawers. A cover for a set of drawers must be fitted for mounting the units as standalone units at one side in a wardrobe. f 2 carcases are fitted adjacently, the centre partition kit must be used (see page 240). Complete sets of drawers: see pages ! Accessories: see page 249! for wardrobe inside widths Type no. for hingedoor wardrobes and MULTFORMA room system Type no. for folding and slidingdoor wardrobes 1 Raster drawer with wooden front 19.2 cm high 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm Raster drawer with glass front 19.2 cm high 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm Raster shoe drawer with metal shelf; fits approx. shoe size cm high 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm E Schlafen: nnenausstattung Seite

70 Wardrobe interior fittings WARDROBE NTEROR FTTNGS Accessories The drawers in the sets of drawers and the carcases for fitting at any level can be fitted with drawer compartments. The pullout trouser holder is meant for fitting on the inner side of the wardrobe. The storage bowl enhances the pullout trouser holder in the form of an additional extra. for wardrobe inside widths Type no. for hingedoor wardrobes and MULTFORMA room system Type no. for folding and slidingdoor wardrobes Compartment for ties We recommend only fitting these compartments in drawers with glass fronts. 5.6 cm high Number of compartments for ties: for wardrobe Hingedoors/ Foldingdoors/ inside width: room system slidingdoors 48 cm cm cm cm cm cm cm cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm Compartment for linen We recommend only fitting these compartments in drawers with glass fronts. 5.6 cm high Number of compartments for linen: for wardrobe Hingedoors/ Foldingdoors/ inside width: room system slidingdoors 48 cm 6 58 cm cm cm cm cm cm cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm Pullout trouser holder incl. top wooden cover shelf, block sides and storage bowl (storage bowl in 3 compartments, 2.7 cm high, 24.3 cm wide, 10.7 cm deep, of grey plastic, resting in rear area of trouser holder); for fitting on inner side of wardrobe at 98.3 cm height Total height of pullout trouser holder including cover shelf: 21.5 cm; block 19.2 cm high, 55.0 cm deep 68 cm 78 cm 88 cm 98 cm 108 cm L L L L R R R R Number of compartments for trousers / number of storage bowls: for wardrobe Hingedoors/ Foldingdoors/ inside width: room system slidingdoors 68 cm 10 / 1 78 cm 12 / 2 10 / 1 88 cm 14 / 2 12 / 2 98 cm 16 / 2 14 / cm 16 / 2 f the cover shelf is fitted in the MULTFORMA room system, please add a "1" to the type number (e.g ). Please state clearly in the order! Cover shelf 2.3 cm thick E Schlafen: nnenausstattung Seite cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm L/R = left/right (see here pages )

71 Wardrobe interior fittings List of versions: see page 238 Cover for sets of drawers (standalone at one side); consisting of block sides and a top cover shelf. The cover for sets of drawers is necessary when sets of drawers and carcases are fitted as standalone units at one side in the wardrobe (example: a 48 cm wide set is fitted in a wardrobe with an inside width of 98 cm so that one side of the set is fitted on the interior side of the wardrobe and the other side of the set stands alone in the wardrobe centre). Note: The standard cover shelf of the sets of drawers or carcases is automatically removed from the set or carcase. The cost of the special cover for the set of drawers or carcases is offset against the cost of this standard cover. f the cover for sets of drawers is to be fitted in the MULTFORMA room system, please add a "1" to the type number (e.g ). Please state clearly in the order! for wardrobe inside widths Type no. for hingedoor wardrobes and MULTFORMA room system Type no. for folding and slidingdoor wardrobes for 1 Raster height 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm for 2 Raster height 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm Cover for sets of drawers for 3 Raster height 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm for 4 Raster height 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm for 5 Raster height 48 cm 58 cm 68 cm 78 cm 88 cm 98 cm 108 cm E Schlafen: nnenausstattung Seite

72 Wardrobe interior fittings WARDROBE NTEROR FTTNGS Wardrobe interior fittings in special width n order to exploit the area available inside the wardrobes in special width optimally, it is also possible to order the wardrobe interior fittings in special width for these units. Cover shelf and side panels in special width type See below for two examples of calculation! Hingedoor wardrobes and MULTFORMA room system The standard sets of drawers and carcases for fitting at any level in hingedoor wardrobes and in the MULTFORMA room system have slim 4.5 cm wide side panels fitted at both sides (see here pages ). These panel sizes are different in the case of wardrobe interior fittings in special width. f a hingedoor wardrobe, for example, is required in the special wardrobe inside width of 64 cm, the wardrobe interior fittings must be fitted in the next smaller standard size that means the required wardrobe interior fittings are in a width of 58 cm. The difference in width of 6 cm that results is balanced out by making the 4.5 cm wide side panels 3 cm wider (= 7.5 cm each). Foldingdoor and slidingdoor wardrobes The standard sets of drawers and carcases for fitting at any level in folding and slidingdoor wardrobes are fitted with a slim 4.5 cm wide side panel at one side and a wide 14.5 cm wide side panel at the other side (see here pages ). The panel size of the slim panel is different in the case of wardrobe interior fittings in special width. f a foldingdoor wardrobe, for example, is required in the special wardrobe inside width of 82 cm, the wardrobe interior fittings must be fitted in the next smaller standard size that means the required wardrobe interior fittings are in a width of 78 cm. The difference in width of 4 cm that results is balanced out by making the 4.5 cm wide side panel 4 cm wider (= 8.5 cm), the 14.5 cm wide side panel always retains its original width. L/R = left/right (see here pages ) Special wardrobe inside width of 64 cm 64 Special wardrobe inside width of 82 cm 82 L Standard width of wardrobe interior fittings of 58 cm 58 Standard width of wardrobe interior fittings of 78 cm 78 The panel width now comes to 7.5 cm each 3 4,5 4,5 3 7,5 7,5 Large side panel width always remains in original size of 14.5 cm, the slim side panel width is now 8.5 cm 4,5 4 14,5 8,5 E Schlafen: nnenausstattung Seite

73 Usable bed inside height and space under bed Note on usable bed inside height: The support slats of the hülsta beds are delivered in the centre position, i.e. they can be adjusted by 3.2 cm upwards and downwards (exception: for LUNS beds in the standard surface height 1 only by 3.2 cm upwards. f the slats are set in the lowest position, the maximum usable bed inside height is achieved. n the case of some beds, especially the designoriented beds, the bed inside height is comparatively low. This means that mattresses in combination with base frames that are somewhat higher (e.g. base frames with motor drive) are not held so well by the bed side sections. Please note that the usable bed inside height of beds with height adjustable support slats is reduced when these are set higher. This is how to calculate the individual height from the data supplied with the base frames: Example (for all beds): ELUMO bed and hülstaflex basic B base frame (back and foot sections adjustable) Max. usable bed inside height: 18.0 cm { approx cm for holding mattress 5.5 cm total height of base frame (example: hülstaflex basic B) LUNS bed in standard surface height 1 and hülstaflex basic B base frame (back and foot sections adjustable) Max. usable bed inside height: 14.0 cm { approx. 8.5 cm for holding mattress 5.5 cm total height of base frame (example: hülstaflex basic B) Note on space under bed: The storage space underneath the base frame is calculated from the bed height minus the usable bed inside height. Example ELUMO bed: 42.2 cm 18.0 cm = 24.2 cm. A space of 15 cm below the bed is necessary for hülsta base frames with motor drives. This is guaranteed in nearly all hülsta beds. With hülstaflex premium Motor the motor lies above the support slats: greatest amount of space possible. 300 E Schlafen: Sonderanfertigungen

74 SPECAL WSHES? COME TO US! Maximum individuality! Maximal flexibility! hülsta makes most of your special wishes possible. Highquality furnishing is an expression of your individuality and personality. hülsta has perfected this idea. We have developed some innovative production systems, which can fulfil more special wishes than ever before. And it makes no difference what range you are thinking of. We will try everything to put your ideas into practice. There are already a lot of special products available for ordering from the hülsta type lists to make things as easy for you as possible. And if you do have a wish which is not quite so easy to implement, just give us a call or send us a mail or a fax. We have our own hülsta Special Wishes Team who are there to help you realise just these customer requests. These colleagues are professionals when it comes to special products. They plan and calculate the possible products for you and even develop an alternative suggestion if the idea should turn out to be technically impossible. Here is an overview of the hülsta range of special wishes: A lot of special products can simply be ordered via the type lists Special products are planned simply and professionally Competent colleagues advise you by phone, by fax and by mail You will be sent alternative suggestions if the idea is technically impossible Many special products are available without a surcharge Specially qualified carpenters and technicians implement your plans perfectly Something missing? Then simply contact us. Our Special Wishes Team can make almost anything possible. And if you should happen to present us with an impossible case no problem. You will be sent a good alternative suggestion which is sure to work. CONTACT US: Tel.: +49 (0) 2563 / 860 Fax: +49 (0) 2563 / Mail: sonderwunsch@huelsta.com Mon. Sat.: 9.00 until E Schlafen: Sonderanfertigungen

75 Special heights, special widths, special depths Special heights Hinge, folding and slidingdoor wardrobes can be reduced in height at intervals of 1.0 cm. Special heights in stepped versions (not possible on slidingdoor wardrobes) at a surcharge: surcharge per step: Below eyelevel we recommend fitting a top cover shelf made of panelling material. Please state in order! Special widths Only applies to hinge and foldingdoor wardrobes. Singledoor units, left or right hinges, can be reduced down to 25 cm width (apart from profiled doors). Twindoor units can be reduced at both sides down to 50 cm total width (apart from profiled doors). nterior fittings, such as drawers and other fittings cannot be reduced in width. For notes on width reductions on MULTFORMA slidingdoor wardrobes please see specialsized products for MULTFORMA! Special depths Depth reductions are made on side sections, plinths, cornices and shelves. nterior fittings, such as drawers and other fittings cannot be reduced in depth. A max. reduction of 30.0 cm is possible on hinge and foldingdoor wardrobes. A max. reduction of 9.0 cm is possible on profiled hingedoors. For slidingdoor wardrobes, a max. reduction of 30.0 cm is possible (max. 18 cm in combination with the electrical opening system for MULTFORMA ). Please note that for technical production reasons not every special depth can be achieved: 2.5 cm standard reduction between 0 and 2.5 cm 5.0 cm standard reduction between 4.5 and 5.0 cm 27.5 cm standard reduction between 27.0 and 27.5 cm 302 E Schlafen: Sonderanfertigungen

76 Side and rear sloping Notes on calculating sizes of sloping units Side sloping Sloping is only possible on singledoor units. The door hinge (left or right) is positioned on the taller outer side of the unit. Measurements required: H 1 = Room height H 2 = Height of slope (f a space is required between the wall and the wardrobe/unit, please state the exact distance.) B 1 = Width of slope B 2 = Width of slope G = Total width S = Wardrobe width Please note! f the slope cuts across the position of a handle, the handle of this door only is positioned further down in production. As floors, ceilings and walls are never exactly straight, the exact room size must be measured using a spirit level. f a cornice is fitted, please state if this is to be continued in the sloping section. For CUTARO and ELUMO wardrobes with a passepartout section, the passepartout for the complete wardrobe is set back by 2 cm (no forward protruding any more). Rear sloping max. 46 cm Rear sloping is possible on all wardrobe units. Measurements required: H 1 = Room height H 2 = Height of slope (f a space is required between the wall and the wardrobe/unit, please state the exact distance.) T 1 = Depth of slope T 2 = Depth of slope E Schlafen: Sonderanfertigungen

77 Specialsized products Please observe the notes, e.g. on side and/or rear sloping and the exact sizes, which are absolutely essential, on pages ! CUTARO ELUMO Wardrobes Wardrobes Special heights: Hingedoor Hingedoor Wood Mirror 0003 no surcharge no surcharge Special heights: Hingedoor Hingedoor Wood Mirror 0003 no surcharge no surcharge Special widths (not possible on highgloss fronts): for singledoor unit Wood for singledoor unit Mirror for twindoor unit Wood for twindoor unit Mirror When ordering extra fitted shelves and clothes rods Size reduction surcharge per fitted shelf Size reduction surcharge per clothes rod Special depths: Surcharge When ordering extra fitted shelves Size reduction surcharge per fitted shelf Side sloping: Surcharge without passepartout in the slope Surcharge with passepartout in the slope Special widths (not possible for doors with artificial leather or genuine leather application or on intermediate units): for singledoor unit Wood 0005 for singledoor unit Mirror for twindoor unit Wood 0006 for twindoor unit Mirror When ordering extra fitted shelves and clothes rods Size reduction surcharge per fitted shelf Size reduction surcharge per clothes rod Special depths (not possible on intermediate units with open compartment in artificial leather or genuine leather): Surcharge 0007 When ordering extra fitted shelves Size reduction surcharge per fitted shelf ntermediate unit Depth reduced by 12 cm Depth reduced by 24 cm Rear sloping: Surcharge Ancillary units Special heights (doors with design fractal and drawers not possible in special height): Carcase Door Chest of drawers in drawer raster Special widths (drawers with design fractal not possible in special width): Carcase Door Drawer When ordering extra fitted shelves Size reduction surcharge per fitted shelf Beds Bed in special length 190 cm Bed with two footboards (allround bed; not possible on beds with bed surround frame of leather) Specialsized products for special combinations: Pricing: recommended retail price of the special combination + 15% plus the recommended retail prices of all the required specialsized products (see above) More special products are possible. Please get in touch with your customer advisor no surcharge Side sloping: Surcharge without passepartout in the slope Surcharge with passepartout in the slope Rear sloping: Surcharge Ancillary units Special heights (drawers not possible in special height): Carcase Door Special widths (not possible with integrated niche lamps, on ancillary units with open compartment in artificial leather or genuine leather or on 80 cm wide consoles and chests; width reduction on 120 cm wide chests with open compartment: max. 40 cm): Carcase Door Drawer Wall shelf (min. 36 cm wide) When ordering extra fitted shelves Size reduction surcharge per fitted shelf Beds Bed in special length 190 cm Upholstered headboard in special height Specialsized products for special combinations: Pricing: recommended retail price of the special combination + 15% plus the recommended retail prices of all the required specialsized products (see above) More special products are possible. Please get in touch with your customer advisor. 304 E Schlafen: Sonderanfertigungen

78 Specialsized products Please observe the notes, e.g. on side and/or rear sloping and the exact sizes, which are absolutely essential, on pages ! FENA GENTS Wardrobes Wardrobes Special heights: Hingedoor Hingedoor Wood Mirror no surcharge no surcharge Special heights: Hingedoor Hingedoor Wood Mirror no surcharge no surcharge Special widths: for singledoor unit for singledoor unit for twindoor unit for twindoor unit Wood Mirror Wood Mirror Special widths: for singledoor unit for singledoor unit for twindoor unit for twindoor unit Wood Mirror Wood Mirror When ordering extra fitted shelves and clothes rods Size reduction surcharge per fitted shelf Size reduction surcharge per clothes rod When ordering extra fitted shelves and clothes rods Size reduction surcharge per fitted shelf Size reduction surcharge per clothes rod Special depths: Surcharge 0007 Special depths: Surcharge 0007 When ordering extra fitted shelves Size reduction surcharge per fitted shelf 9993 When ordering extra fitted shelves Size reduction surcharge per fitted shelf 9993 Side sloping: Surcharge 9994 Side sloping: Surcharge 9994 Rear sloping: Surcharge Rear sloping: Surcharge Beds Bed in special length 190 cm Bed with two footboards (allround bed) no surcharge Specialsized products for special combinations: Pricing: recommended retail price of the special combination + 15% plus the recommended retail prices of all the required specialsized products (see above) Specialsized products for special combinations: Pricing: recommended retail price of the special combination + 15% plus the recommended retail prices of all the required specialsized products (see above) More special products are possible. Please get in touch with your customer advisor. More special products are possible. Please get in touch with your customer advisor. E Schlafen: Sonderanfertigungen

79 Specialsized products Please observe the notes, e.g. on side and/or rear sloping and the exact sizes, which are absolutely essential, on pages ! LA VELA LUNS Wardrobes Wardrobes Special heights: Hinge/foldingdoor wing Hinge/foldingdoor wing Wood Mirror no surcharge no surcharge Special heights: Hingedoor Hingedoor Wood Mirror 0003 no surcharge no surcharge Special widths (not possible on highgloss fronts): for singledoor unit Wood for singledoor unit Mirror for twindoor unit Wood for twindoor unit Mirror for panorama unit Wood for panorama unit Mirror When ordering extra fitted shelves and clothes rods Size reduction surcharge per fitted shelf Size reduction surcharge per clothes rod Special depths: Surcharge When ordering extra fitted shelves Size reduction surcharge per fitted shelf ntermediate unit Depth reduced by 12 cm Depth reduced by 24 cm Special widths: for singledoor unit for singledoor unit for twindoor unit for twindoor unit Wood Mirror Wood Mirror When ordering extra fitted shelves and clothes rods Size reduction surcharge per fitted shelf Size reduction surcharge per clothes rod Special depths: Surcharge When ordering extra fitted shelves Size reduction surcharge per fitted shelf Side sloping: Surcharge without cornice profile in the slope Surcharge with cornice profile in the slope Side sloping: Surcharge without cornice in the slope Surcharge with cornice in the slope Side sloping is possible up to a minimum height of 88.0 cm. Rear sloping: Surcharge Rear sloping: Surcharge Ancillary units Special heights (drawers not possible in special height): Carcase Door Cover panel Utility chest in drawer raster Profiled glass doors not possible in special height. Special widths (the sides of veneer versions are not curved, straight rim; please state from which side the reduction should begin): Carcase Door Drawer Cover panel Flap Wall shelf (min. 36 cm wide) When ordering extra fitted shelves Size reduction surcharge per fitted shelf Special depths (drawers not possible in special depth): Carcase When ordering extra fitted shelves Size reduction surcharge per fitted shelf Beds Headboard in special width without alteration to inside bed size (max. 3.5 cm each side) Headboard in special height Bed with two footboards up to 2 m length (allround bed; not possible for hovering beds) Specialsized products for special combinations: Pricing: recommended retail price of the special combination + 15% plus the recommended retail prices of all the required specialsized products (see above) More special products are possible. Please get in touch with your customer advisor no surcharge Ancillary units Special heights (drawers not possible in special height and not possible on highgloss versions) Carcase Door Chest of drawers in drawer raster Special widths (not possible on highgloss versions): Carcase Door Drawer Pedestal Headboard panel When ordering extra fitted shelves Size reduction surcharge per fitted shelf Special widths are not possible on panel carcase and on angled shelves (for headboard panels). Special depths (drawers not possible in special depth): Carcase When ordering extra fitted shelves Size reduction surcharge per fitted shelf Beds Bed in special length 190 cm Upholstered headboard in special height Bed with two footboards (allround bed) Special width and height are not possible on the profiled wood/lacquer headboard. Specialsized products for special combinations: Pricing: recommended retail price of the special combination + 15% plus the recommended retail prices of all the required specialsized products (see above) More special products are possible. Please get in touch with your customer advisor E Schlafen: Sonderanfertigungen

80 Specialsized products Please observe the notes, e.g. on side and/or rear sloping and the exact sizes, which are absolutely essential, on pages ! METS plus Wardrobes Special heights: Hinge/foldingdoor Hinge/foldingdoor Slidingdoor Slidingdoor Highgloss Mirror Highgloss Mirror 0003 no surcharge no surcharge Special widths (not possible on hinge/foldingdoors): Slidingdoor Highgloss Slidingdoor Mirror When ordering extra fitted shelves and clothes rods Size reduction surcharge per fitted shelf Size reduction surcharge per clothes rod Width reductions of slidingdoor wardrobes: minimum widths 2door slidingdoor wardrobe (all widths): reducible down to min cm width (please note the next smaller width!) Note: f slidingdoor wardrobes are required in a special width, the width of all the doors is reduced symmetrically. Special widths are not possible on intermediate units and on hinge/foldingdoor wardrobes Special depths: Surcharge When ordering extra fitted shelves Size reduction surcharge per fitted shelf ntermediate units Depth reduced by 12 cm Depth reduced by 24 cm Side sloping: Surcharge Rear sloping: Surcharge Other: Twindoor slidingdoor wardrobes are also available in reverse order (left door runs in front, right door behind). Please add an S to the type no. in this case (e.g. 2421S) no surcharge Ancillary units Special heights (drawers not possible in special height): Carcase highgloss Door highgloss Chest of drawers in drawer raster Carcase highgloss Beds (only on beds in highgloss version; not possible on upholstered beds) Headboard in special height (reduced in cm steps up to a max. 15 cm) Bed in special length 190 cm Bed in special width Bed with two footboards (allround bed; only possible for 200 cm length) Special sizes are not possible on upholstered beds Price deduction Specialsized products for special combinations: Pricing: recommended retail price of the special combination + 15% plus the recommended retail prices of all the required specialsized products (see above) More special products are possible. Please get in touch with your customer advisor. E Schlafen: Sonderanfertigungen

81 Specialsized products Please observe the notes, e.g. on side and/or rear sloping and the exact sizes, which are absolutely essential, on pages ! MULTFORMA Special heights: Hinge/foldingdoor Hinge/foldingdoor Slidingdoor Slidingdoor Special widths: for singledoor unit for singledoor unit for twindoor unit for twindoor unit for panorama unit for panorama unit Slidingdoor Slidingdoor Wood/highgloss Mirror Wood/highgloss Mirror Wood/highgloss Mirror Wood/highgloss Mirror Wood/highgloss Mirror Wood/highgloss Mirror Special widths are not possible on profiled hingedoor end units, on intermediate units and on hinge/foldingdoor wardrobes with doors with highgloss fronts in design A, G, J and F. When ordering extra fitted shelves and clothes rods Size reduction per fitted shelf Size reduction per clothes rod Width reductions of slidingdoor wardrobes: minimum widths 2door slidingdoor wardrobe (all widths): reducible down to min cm width (please note the next smaller width!) 3door slidingdoor wardrobe (width 242 cm): reducible down to min cm width 3door slidingdoor wardrobe (widths 272, 302 and 332 cm): reducible down to min cm width (please note the next smaller width!) 4door slidingdoor wardrobe (all widths): reducible down to min cm width (please note the next smaller width!) 0003 no surcharge no surcharge 0004 no surcharge no surcharge 0005 no surcharge no surcharge 0006 no surcharge no surcharge no surcharge no surcharge no surcharge no surcharge 9991 no surcharge 9992 no surcharge Other: Horizontal passepartout in highgloss version only available in combination with a vertical passepartout. Twindoor slidingdoor wardrobes are also available in reverse order (left door runs in front, right door behind). Please add an S to the type no. in this case (e.g. A55162S) Hingedoor units in widths of 42/40, 52/50, 72/70, 82/80 and 102/100 cm and in heights of and cm can also be fitted with rod handle locks against a surcharge (exception: rod handle locks not possible on hingedoors in Design J, F and F plus). rod handle lock per hingedoor: for singledoor hingedoor unit, left hinge for singledoor hingedoor unit, right hinge for twindoor hingedoor unit Bottom end slat: f hingedoor units are fitted with rod handle locks, a bottom end slat must be planned. n this case, the total height of an optional wardrobe interior fitting is then increased by 3.2 cm. for wardrobe inside width 48 cm for wardrobe inside width 58 cm for wardrobe inside width 68 cm for wardrobe inside width 78 cm for wardrobe inside width 98 cm More special products are possible. Please get in touch with your customer advisor no surcharge Note: f slidingdoor wardrobes are required in a special width, the width of all the doors is reduced symmetrically. Special depths: 0007 no surcharge When ordering extra fitted shelves Size reduction per fitted shelf ntermediate units (not possible on intermediate units 1, 10, 4 and 11) Depth reduced by 12 cm Depth reduced by 24 cm Side sloping: Surcharge without cornice profile in the slope Design A Design A plus Design G Design G plus Design L Design F Design F plus Surcharge with cornice profile in the slope Design A Design A plus Design G Design G plus Design L Design F Design F plus Carcase room system 9993 no surcharge Side sloping of profiled hingedoor end units and of doors in Design J are not possible. MULTVARS Ancillary units Special heights (drawers not possible in special height): Carcase wood/lacquer Carcase highgloss Door wood/lacquer Door highgloss More special products are possible. Please get in touch with your customer advisor. SERA No specialsized products are possible in the SERA range. Rear sloping: Surcharge Rear sloping of profiled hingedoor end units on request. 308 E Schlafen: Sonderanfertigungen

82 Specialsized products Special articles Wardrobe doors are also available as separate units and are charged as follows: a) For 1 hingedoor/foldingdoor wing: 50% of the concerning 1door hingedoor extension unit b) For 1 slidingdoor including mechanism: 35% of the twindoor slidingdoor wardrobe For door superstructures, type 100 (max. 98 cm wide, only for assembly between wardrobes): 100% of twindoor hingedoor extension unit Panels for side and top covering of fitted wardrobes (not possible for highgloss versions; support construction and fitting materials must be acquired on site). a) for veneered/lacquered versions (max cm long, max cm wide, 2.0 cm thick) Basis charge per order: price per sq. m. lacquer price per sq. m. veneer 990 Veneer match with fronts can not be guaranteed. Edge veneer for veneered/lacquered versions per m. length 9902 Wardrobe doors can also be fitted with 165 hinges against a surcharge (only possible on plain, straight hingedoors). Please mark the doors clearly in the order! 165 hinges per hingedoor: 180 Highgloss care set Polish, polishing sponge and polishing cloth (incl. instructions) for protecting and maintaining the highgloss surfaces 36 Special colours All the hülsta lacquer colours are possible for nearly all the hülsta ranges. Availability and prices on request. E Schlafen: Sonderanfertigungen

83 Wall composition / assembly instruction mportant notes: The composition of walls must be ascertained before concluding a contract and be checked by a qualified fitter before assembly takes place. Assembly may only be carried out by a qualified fitter under careful observation of the assembly instructions. The plastic Rawl plugs with the type name SX 8 x 65 from the Fischer Company supplied by hülsta as a standard set are only suitable for concrete C12/15, if the wall composition and compression strength corresponds to the table below. Under no circumstances must a unit be assembled on light masonry. Furthermore, we provide a mounting set with assembly mortar from the Fischer Company for the types of walls listed below (see assembly mortar set below). Again, assembly must be carried out by a qualified fitter under careful observation of the wall composition and assembly instruction. The compression strength levels stated below must be met under all circumstances. Materials table with a description of which sets are to be used with the following types of walls: Standard set (SX 8 x 65) Concrete C12/15 Compression strength 15 N/mm² Assembly mortar set only suitable for the materials stated below! Building bricks Mz 12 Compression strength 12 N/mm² Solid blocks of light concrete V2 Compression strength 2 N/mm² Limestone blocks KS 12 Compression strength 12 N/mm² Perforated blocks of light concrete Hbl 2 Compression strength 2 N/mm² Perforated sand lime bricks KSL12 Compression strength 12 N/mm² Aerated concrete PP2 Compression strength 2 N/mm² Vertically perforated bricks HLz 12 Compression strength 12 N/mm² Bulk density 1.0 kg/dm³ A different and more suitable type of mounting must be chosen by a qualified fitter in all other cases. hülsta cannot accept any responsibility for the choice of any other types of mounting! Please note that if the units are not mounted properly on the wall, there is a risk of the units falling down or tipping over especially when alternative mounting materials acquired on site have been used. Generally speaking, you as a dealer/qualified fitter are responsible for the correct wall mounting of the units. Mounting sets Labelling in type list drawings / assembly notes for wall units The majority of units have two wall mounting points (= number of support boards), if these are to be fitted as wall units. This is not explicitly mentioned in the type list. f a different number of wall mounting points (= support boards) is required, this is marked in the drawings in the type list with numbers in black boxes. Every support board requires four mounting screws. 3 4 = 3 support boards = 4 support boards, etc. One assembly mortar set is sufficient for up to a maximum of 3 support boards or 4 wall sidepanels. mportant note: Depending on the composition of the wall (see wall types illustrated above), assembly must be carried out using the special assembly mortar set and a standard trade mastic tool which are the basic essentials for safe and clean workmanship. Standard set The standard set consists of 4 plastic Rawl plugs (SX 8 x 65) and 4 mounting screws and is sufficient for 1 support board. The standard sets are included in the packet of fittings to match the number of support boards. Assembly mortar set for up to a maximum of 3 support boards consisting of: 9x injection retaining sleeve 9x screwin sleeve 1x injection cartridge 2x static mixer 1x assembly instructions Please use the mounting screws from the standard set (supplied free of charge). Example of order: Add up number of support boards for all existing unit types Divide the sum by 3 Round up the result to a full number = Number of assembly mortar sets required M2 310 All prices stated are recommended retail prices. E Schlafen: Wandbeschaffenheit

84 Switch options for lamps: MagicTronic MagicTronic The lamps are normally operated by an external footswitch. As an alternative we can also provide a MagicTronic switch, which is charged extra. By stroking the outer or top side of the unit at the same level as the invisible integrated sensor it is possible to switch all the lamps on and off ( Stroking method ). As an alternative the position of the hidden sensor can also be marked with a small metal plate on the furniture unit ( Marking method ). Lamps with a maximum power of 200 W can be operated by a MagicTronic unit (230 V). The footswitch is omitted when a MagicTronic unit is included. Standard position of MagicTronic for angled shelves: for angled shelves of the CUTARO and METS plus ranges: sensor is fitted 8 cm from the top rim and 8 cm from the left side in the rear wall panel for angled shelves of the LUNS range: sensor is fitted 16 cm from the rear rim and 9.6 cm from the left side in the shelf Standard position of MagicTronic for consoles and chests: for consoles and chests of the ELUMO and LUNS ranges: sensor is fitted 16 cm from the rear rim in the cover shelf and 15.0 cm at the side next to the bed for consoles and chests of the MULTVARS range: sensor is fitted 12 cm from the rear rim in the outer side next to the bed and in approx. 715 cm from the top rim of the unit Standard position of MagicTronic for MULTFORMA wardrobes: for hinge and foldingdoor wardrobes of the MULTFORMA range: sensor is fitted in the right passepartout in approx. 130 cm height (MagicTronic is not possible for wardrobes without passepartout, in slidingdoor wardrobes and in the room and niche system) Alternative positions: f the MagicTronic sensor is to be fitted on the right in the rear wall panel or in the shelf of angled shelves, in the left passepartout of the wardrobe or at any position other than that stated as standard (e.g., if a unit is planned in a niche so that there is insufficient space to the right of the unit), please state this clearly in the order and mark the position in the sketch. f in doubt, please contact your hülsta customer advisor! MagicTronic llustration 1: Stroking method llustration 2: Marking method E Schlafen: Schaltmöglichkeiten

85 Switch options for lamps: MagicTronic Examples of use (schematic diagrams) Example 1 Black point = Standard position of MagicTronic sensor for angled shelves Notes: The black point in the drawings is the area where the MagicTronic sensor is invisibly integrated. f the surface is stroked at this position, the lamps are switched on or off. for angled shelves of the CUTARO and METS plus ranges f you would like to mark the position of the MagicTronic sensor on the furniture, you can fit a small metal plate supplied separately at the corresponding position. for angled shelves of the LUNS range Example 2 Black point = Standard position of MagicTronic sensor for consoles and chests Notes: The black point in the drawings is the area where the MagicTronic sensor is invisibly integrated. f the surface is stroked at this position, the lamps are switched on or off. f you would like to mark the position of the MagicTronic sensor on the furniture, you can fit a small metal plate supplied separately at the corresponding position. for consoles and chests of the ELUMO and LUNS ranges for consoles and chests of the MULTVARS range Example 3 Black point = Standard position of MagicTronic sensor for hinge and foldingdoor wardrobes of the MULTFORMA range Notes: The black point in the drawings is the area where the MagicTronic sensor is invisibly integrated. f the surface is stroked at this position, the lamps are switched on or off. f you would like to mark the position of the MagicTronic sensor on the furniture, you can fit a small metal plate supplied separately at the corresponding position. for hinge and foldingdoor wardrobes of the MULTFORMA range E Schlafen: Schaltmöglichkeiten

86 Switch options for lamps: Remote control unit with changing colours Remote control unit with changing colours The lamps are normally operated by an external footswitch. The colour temperature of the LED lamps is cold white if a footswitch is used. A 4channel remote control unit (= transmitter), which is charged extra, is also available as an alternative. Several lamps (up to a total load of a maximum 30 W per transformer and receiver) can be operated with each of the 4 channels. All 4 channels can be dimmed separately at the push of a button. The colour temperature of all 4 channels can be set from cold white (= the basic setting of the LED lamps) to warm white. f warm white is required, a radio remote control unit must be ordered. t is also possible to switch all channels on and off simultaneously with the all on or all off buttons. Up to 4 transmitters can operate as many receivers as required. Transmitters and receivers must be ordered separately. The footswitch is omitted when the remote control unit is used. The following points must be noted with the radio remote control unit: The receiver must be positioned behind a rear wall or under plinth shelves (at least 20 mm space required under plinth shelves). The total wattage power of all lamps included per power supply unit/receiver must not exceed 30 W. 4 channels = 4 light groups 1 light group = x lights All lamps within a light group can be dimmed to the same brightness. The same light colour can be set for all lamps in all the light groups. This light colour is then valid for all the lamps. The remote control unit is not suitable for equipment operating on 110 V! mportant notes: The information on basic settings for the LED lamps as well as setting the colour temperature do not apply to the MEGADESGN and MULTVARS ranges! Please be sure to note the operating and programming instructions! 4channel remote control unit with changing colours Light colour warmer Light colour colder Channel 1 to 4 (with dimmer function) All off All on 4channel remote control unit with changing colours Price per transmitter type Price per receiver type E Schlafen: Schaltmöglichkeiten