ELUMO II. Wardrobes. Beds. Ancillary units. Quality features

Transcription

1 ELUMO II Link to the assembly / user instruction movies If you place great value on expressive furniture, highquality surfaces and individual style in your bedroom, too, ELUMO II is sure to inspire you. Charming design details and extraordinary materials make something truly individual out of any bedroom. Leather as an application on wardrobes and ancillary units or used as the entire surface of beds conveys an exclusive and yet pleasant atmosphere to your bedroom which can be further highlighted by matching lamp units. Wardrobes Height reductions at intervals of 1.0 cm without surcharge! Hingedoor wardrobes according to the endless assembly principle Doors with optional application in wood/lacquer version, artificial leather or genuine leather or with mirror (mirror not possible on doors with application) Optional with allround passepartout frame with top LED lamp (12 V, 2.4 W) with allround passepartout frame and top LED lamp (12 V, 2.4 W) Intermediate units in two widths for a more open look Doors of intermediate units with optional application in wood/lacquer version, artificial leather or genuine leather or intermediate units with open compartment in wood/lacquer version, artificial leather or genuine leather Intermediate units with optional interior TV unit fittings Wardrobe interior carcase and wardrobe interior fittings in a standard white lacquer version Standard interior fittings: 2 fitted shelves, 1 clothes rod Functional and highquality wardrobe interior fittings (see separate "Wardrobe interior fittings" chapter) Beds A multitude of beds: beds with upholstered headboards, with optional low, high or functional upholstered headboard A or B, or as allround beds; bed surround frames optionally in a wood/lacquer or an upholstered version. Some beds are available with optional rear surface treated headboards. Accessories for beds In combination with the hülsta Sleeping System, the beds guarantee highest sleeping comfort. With its highgrade quality spring base frames and mattresses, the hülsta Sleeping System provides the perfect prerequisites for relaxing sleep (see separate "SLEEPING SYSTEMS" chapter). Ancillary units Consoles with open compartment in two widths; open compartment in optional wood/lacquer version, artificial leather or genuine leather and with optional lamps Chests with open compartment in two widths, open compartment in optional wood/lacquer version, artificial leather or genuine leather and with optional lamps, or chests with cover panel in two widths, cover panel in optional wood/lacquer version, artificial leather or genuine leather Wall shelves, ancillary table and mirrors Table lamps Quality features All wardrobe doors with cushioning bracket Wardrobe doors with handle grip and spring hinges Visually unobtrusive 2.5 mm drilled raster holes on wardrobes Centre partitions and outer side sections of wardrobes with special plinth adjustment hülstasoftflow/hülstapushtoopen: Drawers of intermediate units with open compartment and ancillary units on hidden bearings with automatic cushioning device or with hülstapushtoopen for the lower drawers of the chest with cover panel hülstamagicclose/hülstapushtoopen: All wooden hingedoors with door hinge cushioning device or with hülstapushtoopen for the doors of the intermediate units without open compartment Important notes: Generally speaking, you as a dealer/qualified fitter are responsible for the correct wall mounting of the units. That is why wall mounting should only be carried out by properly trained and qualified fitters. hülsta supplies materials for mounting units on walls for nearly all the units and which should be used for safety and for constructional reasons. The assembly materials supplied by hülsta (plugs, screws) are only suitable for fitting components on to concrete in firmness class (C12/15). For other materials (please see separate materials table in the wall composition chapter) we provide you with an assembly mortar set as an extra order. Please note that this assembly mortar set is also only suitable for the materials listed in the materials table. If walls are made up of other materials (e.g. plastered or lighter wall materials), one should use another method of mounting better suited to the load on site. Please note that if the units are not mounted properly on the wall, there is a risk of the units falling down or tipping over especially when alternative mounting materials acquired on site have been used. For the reasons stated above it is absolutely essential to enquire about the composition of any walls before signing any contracts. 18 E Schlafen: ELUMO II Seite

2 Lists of versions ELUMO II Lists of versions: Wardrobes Model no Wardrobe exterior carcase and front as well as passepartout White lacquer Core walnut The model nos. for the wardrobe exterior carcase and front as well as the passepartout must be stated separately as colour combinations are possible. Wardrobe interior carcase in standard white lacquer version. Handle version Hingedoor wardrobe With the ELUMO II hingedoor wardrobes you can choose between the highgloss chrome and matt chrome handle versions. The required handle version must always be stated in the order. If no details of the handle version are stated in the order, handle 029 is supplied exworks. Handle 029 Standard handle; highgloss chrome Handle 030 Matt chrome Beds Handle height: 77.0 cm Handle height: 77.0 cm Model no. Headboard and bed surround frame White lacquer Core walnut hülsta fabric collection Bed systems with upholstered headboard as well as bed surround frame in upholstered version or wood/lacquer version. hülsta fabric collection: see separate "hülsta fabric collection" chapter! The model/fabric nos. for the bed headboard as well as for the bed surround frame must be stated separately as colour combinations are possible. Ancillary units, wall shelves, ancillary table Model no. Ancillary unit carcase and front, wall shelves, ancillary table White lacquer Core walnut Applications Model no. Applications White lacquer Core walnut Artificial leather and genuine leather of the hülsta fabric collection In ELUMO II some selected components in individual product groups are available in different versions. hülsta fabric collection: see separate "hülsta fabric collection" chapter! E Schlafen: ELUMO II Seite

3 Special combinations Please also note the mattresses and base frames in the separate "SLEEPING SYSTEMS" chapter! Special combinations consisting of a bed unit (bed with low upholstered headboard and bed surround frame in wood/lacquer version as well as two drawer consoles) and a wardrobe. Bed: Bed with low upholstered headboard in price group I and bed surround frame in wood/lacquer version; bed legs highgloss chrome Consoles: Consoles with 2 drawers and open compartment in wood/lacquer version, optionally 60 or 80 cm wide; console legs highgloss chrome Wardrobe: Wardrobe with hingedoors. Height reductions of hingedoor wardrobes at intervals of 1 cm without surcharge. Lists of versions: see page 19 Specialsized products for special combinations are possible immediately! Pricing: recommended retail price of the special combination + 15% plus the recommended retail prices of all the required specialsized products (see here the chapter on "Specialsized products")! Please note: Height reductions of wardrobes remain free of charge! Important: Choose a bed with a low upholstered headboard and bed surround frame in wood/lacquer version (all bed sizes possible please state type number; see page 29), two consoles (each console type possible please state type number; see page 35) as well as one of the wardrobes listed below. ADVANTAGE! Important note! Additional fittings for special combinations such as wardrobe doors with applications on wardrobe, bed with upholstered headboard with cover in price group II or III, functional upholstered headboard A, upholstered bed surround frame as well as legs in matt chrome on the bed or open compartment in artificial leather or genuine leather as well as legs in matt chrome on the consoles can be ordered with or without a surcharge. See here the following double page! 4door hingedoor wardrobe 202 cm wide Bed with low upholstered headboard with cover in price group I and bed surround frame in wood/lacquer version passepartout Information on the energy class: see page 24 below! top LED lamp per unit: 1 lamp A door hingedoor wardrobe (centre unit with hinges right) 252 cm wide passepartout top LED lamp per unit: 1 lamp A door hingedoor wardrobe 302 cm wide passepartout top LED lamp per unit: 1 lamp A E Schlafen: ELUMO II Seite

4 Special combinations Please also note the mattresses and base frames in the separate "SLEEPING SYSTEMS" chapter! Special combinations consisting of a bed unit (bed with low upholstered headboard and bed surround frame in wood/lacquer version as well as two drawer consoles) and a wardrobe. Bed: Bed with low upholstered headboard in price group I and bed surround frame in wood/lacquer version; bed legs highgloss chrome Consoles: Consoles with 2 drawers and open compartment in wood/lacquer version, optionally 60 or 80 cm wide; console legs highgloss chrome Wardrobe: Wardrobe with hingedoors and integrated intermediate unit (with open compartment in wood/lacquer version). Height reductions of hingedoor wardrobes at intervals of 1 cm without surcharge. ELUMO II Specialsized products for special combinations are possible immediately! Pricing: recommended retail price of the special combination + 15% plus the recommended retail prices of all the required specialsized products (see here the chapter on "Specialsized products")! Please note: Height reductions of wardrobes remain free of charge! Important: Choose a bed with a low upholstered headboard and bed surround frame in wood/lacquer version (all bed sizes possible please state type number; see page 29), two consoles (each console type possible please state type number; see page 35) as well as one of the wardrobes listed below. ADVANTAGE! Important note! Additional fittings for special combinations such as wardrobe doors with applications or open compartment of intermediate units in artificial leather or genuine leather on the wardrobe, bed with upholstered headboard with cover in price group II or III, functional upholstered headboard A, upholstered bed surround frame as well as legs in matt chrome on the bed or open compartment in artificial leather or genuine leather as well as legs in matt chrome on the consoles can be ordered with or without a surcharge. See here the following double page! 4door hingedoor wardrobe with integrated intermediate unit 282 cm wide Bed with low upholstered headboard with cover in price group I and bed surround frame in wood/lacquer version passepartout Information on the energy class: see page 24 below! top LED lamp per unit: 1 lamp A door hingedoor wardrobe with integrated intermediate unit 302 cm wide Passepartout top LED lamp per unit: 1 lamp A door hingedoor wardrobe with integrated intermediate unit with open compartment 282 cm wide passepartout top LED lamp per unit: 1 lamp A door hingedoor wardrobe with integrated intermediate unit with open compartment 302 cm wide passepartout top LED lamp per unit: 1 lamp A E Schlafen: ELUMO II Seite

5 Additional fittings for special combinations / surcharges Additional fittings for wardrobes application Each wardrobe door can be fitted with an optional application (in optional wood/lacquer version, artificial leather or genuine leather) for which a surcharge is made. wood/lacquer application per hingedoor artificial leather application per hingedoor Lists of versions: see page 19 genuine leather application per hingedoor GENUINE LEATHER mirror Each wardrobe door can be fitted with an optional mirror (vertical facette) for which a surcharge is made (mirrors not possible on doors with application). mirror per hingedoor Remote control unit remote control unit (transmitter + receiver) type 1601 = extra transmitter type 1602 = extra receiver type 1603 = Top LED lamp each additional lamp type 369 = This luminaire contains builtin LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V; 2.4 W Additional fittings for intermediate units application Each wardrobe door can be fitted with an optional application (in optional wood/lacquer version, artificial leather or genuine leather) for which a surcharge is made. wood/lacquer application per hingedoor artificial leather application per hingedoor genuine leather application per hingedoor GENUINE LEATHER open compartment in artificial leather or genuine leather Standard: wood/lacquer version Open compartment in wood/lacquer version open compartment in artificial leather open compartment in genuine leather GENUINE LEATHER LED light strip in open compartment; 1 light strip This luminaire contains builtin LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V; 1.5 or 1.7 W Standard for 80 cm wide intermediate unit for 100 cm wide intermediate unit E Schlafen: ELUMO II Seite

6 Additional fittings for special combinations / surcharges ELUMO II Additional fittings for beds Low upholstered headboard Standard headboard Upholstered headboard with cover in price group I upholstered headboard with cover in price group II upholstered headboard with cover in price group III Illustration: Upholstered headboard with cover in price gr. I + II Illustration: Upholstered headboard with cover in price gr. III Standard Bed legs Standard bed legs highgloss chrome; alternatively: bed legs matt chrome, type 1000 without surcharge rear surface treated headboard The bed can be fitted with an optional rear surface treated headboard which is charged extra. So the bed can be placed anywhere in the room. functional upholstered headboard A rear surface treated upholstered headboard with cover in price group I functional upholstered headboard A with cover in price group I rear surface treated upholstered headboard with cover in price group II functional upholstered headboard A with cover in price group II rear surface treated upholstered headboard with cover in price group III functional upholstered headboard A with cover in price group III Rear surface treated headboard is not possible. Bed surround frame Standard: wood/lacquer version Bed surround frame in wood/lacquer version Upholstered bed surround frame with cover in price group I upholstered bed surround frame with cover in price group II upholstered bed surround frame with cover in price group III Illustration: Bed surround frame with cover in price gr. I + II Illustration: Bed surround frame with cover in price gr. III Standard 3023 without surcharge Additional fittings for consoles open compartment in artificial leather or genuine leather Standard: wood/lacquer version Open compartment in wood/lacquer version open compartment in artificial leather open compartment in genuine leather GENUINE LEATHER Standard Console legs Standard console legs highgloss chrome; alternatively: console legs matt chrome, type 2000 without surcharge LED light strip in open compartment; 1 light strip This luminaire contains builtin LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V; 0.6 or 1.2 W for 60 cm wide consoles for 80 cm wide consoles surface treated rear wall The consoles can be fitted with an optional surface treated rear wall which is charged extra. So the consoles can be placed anywhere in the room. for 60 cm wide consoles for 80 cm wide consoles E Schlafen: ELUMO II Seite

7 Hingedoor wardrobes Notes on planning hingedoor wardrobes according to the endless assembly principle consisting of basic and extension units. Due to the various element widths one can create many total wardrobe widths. In this way the available floor space can be exploited to the full. For each wardrobe combination, the first element on the left is considered to be the basic unit, incorporating both outer sidesections. One can only include one basic unit in each combination. When adding on extension units, the righthand sidesection of the basic unit is employed as the end sidesection of the complete combination. In the case of singledoor hingedoor units one can choose between left and righthand hinges. The graphics shown below give you an excerpt from our wardrobe assortment. Standard interior fittings per unit: 2 fitted shelves, 1 clothes rod. All interior surfaces are in white lacquer version. Heights incl. plinth Depths Dims. without passepartout with passepartout cm cm 61.0 cm Lists of versions: see page 19 without passepartout, with top LED lamp cm Height reductions at intervals of 1.0 cm without surcharge 61.5 cm 72.0 cm with passepartout and top LED lamp cm 72.0 cm Examples of wardrobes Hingedoor wardrobe Widths Hingedoor wardrobe see pages 2527 Hingedoor wardrobes can be combined with intermediate units With horizontal and vertical passepartout Front mirrors and applications at a surcharge Unit outside widths: 42, 52, 82, 102 cm (basic units) 40, 50, 80, 100 cm (extension units) 80, 100 cm (intermediate units) Unit inside widths: 38, 48, 78, Outside depth: 61.0 cm Inside depth: 56 cm Door opening angle: approx. 94 For calculating the total width when fitting the passepartout frame, please note the passepartout frame protrusion of 3.1 cm left and right! Hingedoor wardrobe with integrated intermediate unit Hingedoor wardrobes can be combined with intermediate units With horizontal and vertical passepartout Front mirrors and applications at a surcharge Unit outside widths: 42, 52, 82, 102 cm (basic units) 40, 50, 80, 100 cm (extension units) 80, 100 cm (intermediate units) Unit inside widths: 38, 48, 78, Outside depth: 61.0 cm Inside depth: 56 cm Door opening angle: approx. 94 For calculating the total width when fitting the passepartout frame, please note the passepartout frame protrusion of 3.1 cm left and right! Lamps All hingedoor wardrobes are available with optional top LED lamps. One top LED lamp (12 V, 2.4 W) is fitted standard above each element 1 or 2 door. If required, a top LED lamp can be fitted centrally above each door. Please include a sketch in all cases. Switching is done by an external footswitch. A remote control unit is also available as an alternative, which is charged extra. The remote control unit incorporates one transmitter and one receiver which operate all the LED lamps. Extra transmitters are available against a surcharge. The footswitch is omitted when the remote control unit is employed. Please note: When planning the passepartout, please note that a minimum distance of 2.0 cm to the ceiling must be observed. 24 Hingedoor wardrobes can be combined with intermediate units With horizontal and vertical passepartout Front mirrors and applications at a surcharge Unit outside widths: 42, 52, 82, 102 cm (basic units) 40, 50, 80, 100 cm (extension units) 80, 100 cm (intermediate units) Unit inside widths: 38, 48, 78, Outside depth: 61.0 cm Inside depth: 56 cm Door opening angle: approx. 94 For calculating the total width when fitting the passepartout frame, please note the passepartout frame protrusion of 3.1 cm left and right! Remote control unit remote control unit (transmitter + receiver) type 1601 = extra transmitter type 1602 = extra receiver type 1603 = Top LED lamp each additional lamp type 369 = This luminaire contains builtin LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V; 2.4 W E Schlafen: ELUMO II Seite

8 Hingedoor wardrobes Height: cm (Height with passepartout and/or top LED lamp: see table page 24 top right; height reductions at intervals of 1.0 cm without surcharge) Width: see table (with passepartout cm each side) Depth: 61.0 cm (Depth with passepartout and/or top LED lamp: see table page 24 top right) Standard interior fittings per unit: 2 fitted shelves, 1 clothes rod; interior fittings are in a standard white lacquer version. Hingedoors with a chrome surface handle, with an optional application or with mirror (at a surcharge). The surcharge for the passepartout frame of the basic units includes the left and righthand vertical frame as well as the horizontal frame, the surcharge for the extension units only includes the horizontal frame. When adding on extension units, the righthand frame of the passepartout of the basic unit is employed as the end unit of the complete combination. The passepartout unit is fulllength up to 302 cm width. For each project please remember to leave a 2.0 cm gap to the ceiling and at the side for assembly! passepartout top LED lamp (12 V; 2.4 W) per unit: 1 lamp Information on the energy class: see below! Please state handle version! application Each wardrobe door can be fitted with an optional application (in optional wood/ lacquer version, artificial leather or genuine leather) for which a surcharge is made. ELUMO II mirror Each wardrobe door can be fitted with an optional mirror (vertical facette) for which a surcharge is made (mirrors not possible on doors with application). Basic units with 2 outer sidesections (each 2 cm thick) For each wardrobe combination, the first element on the left is considered to be the basic unit, incorporating both outer sidesections. One can only include one basic unit in each combination. When adding on extension units, the righthand sidesection of the basic unit is employed as the end sidesection of the complete combination. L Single door unit, left or right, 42 cm wide A L A R Please also note the functional and highquality wardrobe interior fittings as well as the special articles and possible specialsized products in the separate chapters on "Wardrobe interior fittings" and "Special products" L Single door unit, left or right, 52 cm wide A 2011 L A 2012 R Twin door unit, 82 cm wide A Please mark exactly in the front sketch or state in the order (from the left) which hingedoors are to be fitted with an application. Please mark exactly in the front sketch or state in the order (from the left) which hingedoors are to be fitted with a mirror. Twin door unit, 102 cm wide A wood/lacquer application per hingedoor: mirror per hingedoor: Extension units with 1 centre partition (2 cm thick) L Single door unit, left or right, 40 cm wide A L A R artificial leather application per hingedoor: L Single door unit, left or right, 50 cm wide A 0011 L A 0012 R genuine leather application per hingedoor: GENUINE LEATHER Twin door unit, 80 cm wide A Twin door unit, 100 cm wide A Additional fittings for lamps Remote control unit Top LED lamp Please see also the information on page 24! remote control unit (transmitter + receiver) type 1601 = extra transmitter type 1602 = extra receiver type 1603 = each additional lamp type 369 = This luminaire contains builtin LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V; 2.4 W E Schlafen: ELUMO II Seite L/R = Door hinge left/right 25

9 Intermediate units Height: cm (Height with passepartout and/or top LED lamp: see table page 24 top right) Width: see table (with passepartout cm each side) Depth: 61.0 cm (Depth with passepartout and/or top LED lamp: see table page 24 top right) Intermediate units are also possible on request as basic and end units or standalone units. Two intermediate units can also be placed adjacently to one another. Top: 2 doors with hülstapushtoopen and with 3 fitted shelves; lower section of the doors with an optional application in wood/lacquer version, artificial leather or genuine leather Bottom: 2 drawers (inside depth: 48.7 cm) Drawer frames and drawer carcase in standard grey If a different wood/lacquer version is required for the bottom drawers compared to the top wooden doors, please state so in the order. Please state all versions clearly in the order! Interior TV unit fittings for intermediate units: see page 28 For each project please remember to leave a 2.0 cm gap to the ceiling and at the side for assembly! passepartout top LED lamp per unit: 1 lamp This luminaire contains builtin LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V; 2.4 W Lists of versions: see page 19 application The lower section of the wardrobe doors can be fitted with an optional application (in optional wood/ lacquer version, artificial leather or genuine leather) for which a surcharge is made. Intermediate unit with 2 doors and 2 drawers, 80 cm wide Please mark exactly in the front sketch or state in the order which application the hingedoors are to be supplied with. 80 cm wide A wood/ lacquer application: artificial leather application: Intermediate unit with 2 doors and 2 drawers, 100 cm wide genuine leather application: GENUINE LEATHER 100 cm wide A E Schlafen: ELUMO II Seite

10 Intermediate units with open compartment Please state handle version! ELUMO II Height: cm (Height with passepartout and/or top LED lamp: see table page 24 top right) Width: see table (with passepartout cm each side) Depth: 61.0 cm (Depth with passepartout and/or top LED lamp: see table page 24 top right) Intermediate units are also possible on request as basic and end units or standalone units. Two intermediate units can also be placed adjacently to one another. passepartout top LED lamp on unit per unit: 1 lamp LED light strip in open compartment per unit: 1 lamp Top: 2 doors with hülstapushtoopen and with 2 fitted shelves Centre: Open compartment in optional wood/lacquer version, artificial leather or genuine leather and with optional LED light strip, 12 V, 1.5 or 1.7 W Bottom: 2 drawers (inside depth: 48.7 cm) Drawer frames and drawer carcase in standard grey This luminaire contains builtin LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V; 2.4 W This luminaire contains builtin LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V; 1.5 or 1.7 W If a different wood/lacquer version is required for the bottom drawers compared to the top wooden doors, please state so in the order. Please state all versions clearly in the order! Interior TV unit fittings for intermediate units: see page 28 Intermediate unit with 2 doors, open compartment and 2 drawers, 80 cm wide A 070 with open compartment in wood/ lacquer version 80 cm wide with open compartment in artificial leather GENUINE LEATHER with open compartment in genuine leather Intermediate unit with 2 doors, open compartment and 2 drawers, 100 cm wide A 071 with open compartment in wood/ lacquer version 100 cm wide with open compartment in artificial leather E Schlafen: ELUMO II Seite GENUINE LEATHER with open compartment in genuine leather 27

11 Interior TV unit fittings for intermediate units Interior TV unit fitting A for intermediate units TV compartment including cable aperture in TV panel (usable inside dims.: 67.0 cm high, 78.0 (or 98.0) cm wide, 35.5 cm deep; max. load: 60 kg); 2 open compartments below for electronic equipment (usable inside dims. per compartment: 10.0 cm high, 35.0 (or 43.0) cm wide, 47.0 cm deep) Lists of versions: see page 19 Please observe the space requirements given by the electrical dealer (heat buildup)! Please note: When interior TV unit fittings are included, the doors of the intermediate units are fitted with 165 hinges exworks. The 2 fitted shelves, which are fitted standard in the intermediate unit behind doors, are omitted and the price has already been deducted. Because of the 165 hinges on the intermediate unit including the interior TV unit fittings, the door hinges of any 1door wardrobe units included which are situated directly next to the intermediate unit must be fitted on the side next to this intermediate unit! interior TV unit fitting A for 80 cm wide intermediate unit for 100 cm wide intermediate unit Interior TV unit fitting B for intermediate units TV compartment including cable aperture in TV panel (usable inside dims.: 67.0 cm high, 78.0 (or 98.0) cm wide, 35.5 cm deep; max. load: 60 kg) and with flat screen support, ideally adaptable; 2 open compartments below for electronic equipment (usable inside dims. per compartment: 10.0 cm high, 35.0 (or 43.0) cm wide, 47.0 cm deep) Please observe the space requirements given by the electrical dealer (heat buildup)! The flat screen support can be adjusted 3dimensionally. It is suitable for flat screens with a screen diagonal of cm (40 85 ; please observe the usable dims. of the TV compartment; see above); max. load 45 kg. Go to to check if your flat screen can be fitted on this flat screen support. Enter the name WTL6. After a few steps you can see if your flat screen TV is compatible with the flat screen support. Suitable for curved TV s. Flat screen support compatible with VESA Norm standard: min.: 200 x 200 mm, max.: 600 x 400 mm Please note: When interior TV unit fittings are included, the doors of the intermediate units are fitted with 165 hinges exworks. The 2 fitted shelves, which are fitted standard in the intermediate unit behind doors, are omitted and the price has already been deducted. Because of the 165 hinges on the intermediate unit including the interior TV unit fittings, the door hinges of any 1door wardrobe units included which are situated directly next to the intermediate unit must be fitted on the side next to this intermediate unit! interior TV unit fitting B for 80 cm wide intermediate unit for 100 cm wide intermediate unit E Schlafen: ELUMO II Seite

12 Beds with low upholstered headboard Please also note the mattresses and base frames in the separate "SLEEPING SYSTEMS" chapter! Beds with low upholstered headboard and with bed surround frame in wood/lacquer version or in upholstered version Beds incl. support slats for base frames and mattresses Adjustable in height by 3.2 cm downwards and upwards Usable bed inside height (see here the information in the Specialsized products chapter): max cm rear surface treated headboard The bed can be fitted with an optional rear surface treated headboard which is charged extra. So the bed can be placed anywhere in the room. Surcharge in price group I Surcharge in price group II Surcharge in price group III Please be sure to state in the order! Bed accessories: see page 34! ELUMO II Bed legs Standard bed legs highgloss chrome; alternatively: bed legs matt chrome, type 1000 without surcharge! Bed surround frame in wood/lacquer version Bed surround frame in upholstered version Bed surround frame in fabric and artificial leather 12 42, Illustration: headboard in genuine leather, bed surround frame in wood/lacquer version Inside dims. Outside dims. Type no. Type no. Bed surround frame in genuine leather Bed with low upholstered headboard Bed surround frame optionally in wood/lacquer version or in upholstered version. hülsta fabric collection: see separate "hülsta fabric collection" chapter. Please state all versions clearly in the order! Headboard and bed surround frame with cover in price group I 140 x x x x x x x x x x x x x x x x x x x x x x x x Headboard and bed surround frame with cover in price group II 140 x x x x x x x x x x x x x x x x GENUINE LEATHER Headboard and bed surround frame with cover in price group III 140 x x x x x x x x E Schlafen: ELUMO II Seite

13 Beds with high upholstered headboard Please also note the mattresses and base frames in the separate "SLEEPING SYSTEMS" chapter! Lists of versions: see page 19 Beds with high upholstered headboard and with bed surround frame in wood/lacquer version or in upholstered version Beds incl. support slats for base frames and mattresses Adjustable in height by 3.2 cm downwards and upwards Usable bed inside height (see here the information in the Specialsized products chapter): max cm rear surface treated headboard The bed can be fitted with an optional rear surface treated headboard which is charged extra. So the bed can be placed anywhere in the room. Surcharge in price group I Surcharge in price group II Surcharge in price group III Please be sure to state in the order! Bed legs Standard bed legs highgloss chrome; alternatively: bed legs matt chrome, type 1000 without surcharge! Bed surround frame in wood/lacquer version Bed surround frame in upholstered version Bed surround frame in fabric and artificial leather 12 42,2 Illustration: Headboard in upholstered version, bed surround frame in wood/lacquer version Inside dims. Outside dims. Type no. Type no. Bed surround frame in genuine leather Bed with high upholstered headboard Bed surround frame optionally in wood/lacquer version or in upholstered version. hülsta fabric collection: see separate "hülsta fabric collection" chapter. Please state all versions clearly in the order! Headboard and bed surround frame with cover in price group I 140 x x x x x x x x x x x x x x x x x x x x x x x x Headboard and bed surround frame with cover in price group II 140 x x x x x x x x x x x x x x x x GENUINE LEATHER Headboard and bed surround frame with cover in price group III 140 x x x x x x x x E Schlafen: ELUMO II Seite

14 Beds with functional upholstered headboard A Please also note the mattresses and base frames in the separate "SLEEPING SYSTEMS" chapter! Beds with functional upholstered headboard A and with bed surround frame in wood/lacquer version or in upholstered version Top section of split functional headboard can be folded forwards and fixed in various positions. Beds incl. support slats for base frames and mattresses Adjustable in height by 3.2 cm downwards and upwards Usable bed inside height (see here the information in the Specialsized products chapter): max cm Rear surface treated headboard is not possible. Bed accessories: see page 34! ELUMO II Bed legs Standard bed legs highgloss chrome; alternatively: bed legs matt chrome, type 1000 without surcharge! Bed surround frame in wood/lacquer version Bed surround frame in upholstered version 18 Bed surround frame in fabric and artificial leather 12 42,2 95 Illustration: Headboard in upholstered version, bed surround frame in wood/lacquer version Inside dims. Outside dims. Type no. Type no. Bed surround frame in genuine leather Bed with functional upholstered headboard A Bed surround frame optionally in wood/lacquer version or in upholstered version. hülsta fabric collection: see separate "hülsta fabric collection" chapter. Please state all versions clearly in the order! Headboard and bed surround frame with cover in price group I 140 x x x x x x x x x x x x x x x x x x x x x x x x Headboard and bed surround frame with cover in price group II 140 x x x x x x x x x x x x x x x x GENUINE LEATHER Headboard and bed surround frame with cover in price group III 140 x x x x x x x x E Schlafen: ELUMO II Seite

15 Beds with functional upholstered headboard B Please also note the mattresses and base frames in the separate "SLEEPING SYSTEMS" chapter! Lists of versions: see page 19 Beds with functional upholstered headboard B and with bed surround frame in wood/lacquer version or in upholstered version Functional headboard can be set at an angle and fixed in various positions. Beds incl. support slats for base frames and mattresses Adjustable in height by 3.2 cm downwards and upwards Usable bed inside height (see here the information in the Specialsized products chapter): max cm Rear surface treated headboard The upholstered headboard already has a treated rear surface and can therefore be placed anywhere in the room. Bed legs Standard bed legs highgloss chrome; alternatively: bed legs matt chrome, type 1000 without surcharge! Bed surround frame in wood/lacquer version Bed surround frame in upholstered version 18 Bed surround frame in fabric and artificial leather 12 42,2 ca Illustration: Headboard in upholstered version, bed surround frame in wood/lacquer version Inside dims. Outside dims. Type no. Type no. Bed surround frame in genuine leather Bed with functional upholstered headboard B Bed surround frame optionally in wood/lacquer version or in upholstered version. hülsta fabric collection: see separate "hülsta fabric collection" chapter. Please state all versions clearly in the order! Headboard and bed surround frame with cover in price group I 140 x x x x x x x x x x x x x x x x x x x x x x x x Headboard and bed surround frame with cover in price group II 140 x x x x x x x x x x x x x x x x GENUINE LEATHER Headboard and bed surround frame with cover in price group III 140 x x x x x x x x E Schlafen: ELUMO II Seite

16 Allround beds Please also note the mattresses and base frames in the separate "SLEEPING SYSTEMS" chapter! Allround beds with bed surround frame in wood/lacquer version or in upholstered version Beds incl. support slats for base frames and mattresses Adjustable in height by 3.2 cm downwards and upwards Usable bed inside height (see here the information in the Specialsized products chapter): max cm Bed accessories: see page 34! Bed legs Standard bed legs highgloss chrome; alternatively: bed legs matt chrome, type 1000 without surcharge! ELUMO II Inside dims. Outside dims. Type no. Allround bed with bed surround frame in wood/lacquer version Please state all versions clearly in the order! 140 x x x x x x x x ,2 140 x x x x x x x x Allround bed with bed surround frame in upholstered version. hülsta fabric collection: see separate "hülsta fabric collection" chapter. Please state all versions clearly in the order! 140 x x x x x x x x Bed surround frame with cover in price group I 12 42,2 140 x x x x x x x x x x x x x x x x ,2 Bed surround frame with cover in price group II 140 x x x x x x x x x x x x x x x x ,2 GENUINE LEATHER Bed surround frame with cover in price group III 140 x x x x x x x x E Schlafen: ELUMO II Seite

17 Bed lamps Atmospheric lamp for beds with low and high upholstered headboard Switch on headboard Cannot be fitted on beds with rear surface treated headboard and remote control unit. If lamp is fitted later, the total depth increases by 2 cm. This luminaire contains builtin LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V; 3 W per metre length; dimmable 140 cm 8914 Lists of versions: see page 19 for headboard of bed with an inside width of: 160 cm 180 cm 200 cm LED bedside lamp (pair) with motion sensor for switching on and off (no time interval) This luminaire contains builtin LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V; 1.8 W E Schlafen: ELUMO II Seite

18 Consoles Consoles 43.7 cm high 45.2 cm deep (+ 2.9 cm for consoles with surface treated rear wall) Open compartment in optional wood/lacquer version, artificial leather or genuine leather and with an optional LED light strip, 12 V, 0.6 or 1.2 W. Standard switch with an external footswitch; alternative switch for LED light strip also possible with a MagicTronic or a remote control unit (at a surcharge, see page 39). Please state all versions clearly in the order! Console legs Standard console legs highgloss chrome; alternatively: console legs matt chrome, type 2000 without surcharge LED light strip in open compartment per unit: 1 light strip This luminaire contains builtin LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V; 0.6 or 1.2 W ELUMO II surface treated rear wall The consoles can be fitted with an optional surface treated rear wall which is charged extra. So the consoles can be placed anywhere in the room. Please be sure to state in the order! Console with 2 drawers and open compartment, 60 cm wide 5002 Usable dims. open compartment in wood/lacquer version: 10.3 cm high 39.4 cm wide 38.5 cm deep Usable dims. open compartment in artificial and genuine leather version: 9.5 cm high 37.0 cm wide 37.0 cm deep 60 cm wide with open compartment in wood/ lacquer version with open compartment in artificial leather ,7 GENUINE LEATHER with open compartment in genuine leather Console with 2 drawers and open compartment, 80 cm wide 5012 Usable dims. open compartment in wood/lacquer version: Usable dims. open compartment in artificial and genuine leather version: with open compartment in wood/ lacquer version cm high 59.4 cm wide 38.5 cm deep 9.5 cm high 57.0 cm wide 37.0 cm deep 80 cm wide with open compartment in artificial leather 43,7 GENUINE LEATHER with open compartment in genuine leather Accessories for consoles Storage bowl (set of 2) fabric lining, cream white 10.5 cm high 6.4 cm wide 40.0 cm deep fitted in the narrow compartment of consoles behind the drawer front left and right beside the open compartment 510 LED inside drawer lamps Consoles with drawers can be fitted with optional LED inside drawer lamps (7.5 V, 1.0 W powered by standard AAA 1.5 V batteries included rechargeable batteries not possible; with automatic on/off switch). Please state exactly in your order which drawer is to be fitted with LED inside drawer lamps. This type of luminaire is excepted from obligatory labelling in accordance with EUVO 874/2012 guidelines (Reason: batteryoperated and/or <30 Lumen). LED inside drawer lamps per drawer: E Schlafen: ELUMO II Seite

19 Chests Chests 85.3 or cm high 45.2 cm deep Open compartment in optional wood/lacquer version, artificial leather or genuine leather and with an optional LED light strip, 12 V, 1.2 or 1.5 W. Standard switch with an external footswitch; alternative switch for LED light strip also possible with a MagicTronic or a remote control unit (at a surcharge, see page 39). Please state all versions clearly in the order! Chest legs Standard chest legs highgloss chrome; alternatively: chest legs matt chrome, type 2000 without surcharge Lists of versions: see page 19 LED light strip in open compartment per unit: 1 light strip This luminaire contains builtin LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V; 1.2 or 1.5 W Chest with 2 wooden doors, open compartment and 1 drawer, 120 cm wide Usable dims. open compartment in wood/lacquer version: 20.0 cm high 80.0 cm wide 38.5 cm deep Usable dims. open compartment in artificial and genuine leather version: 18.5 cm high 77.5 cm wide 37.0 cm deep with open compartment in wood/ lacquer version ,3 85,3 117,3 Chest with 3 wooden doors (centre door with righthand hinges), open compartment and 1 drawer, 160 cm wide Usable dims. open compartment in wood/lacquer version: 20.0 cm high 60.4 cm wide 32.5 cm deep Usable dims. open compartment in wood/lacquer version: 20.0 cm high 60.4 cm wide 32.5 cm deep Usable dims. open compartment in artificial and genuine leather version: 18.5 cm high 58.0 cm wide 37.5 cm deep Usable dims. open compartment in artificial and genuine leather version: 18.5 cm high 58.0 cm wide 37.5 cm deep 120 cm wide 160 cm wide Chest with cover shelf with stained glass section with 3 wooden doors (centre door with righthand hinges), open compartment and 1 drawer; drawer with 3 compartments, centre drawer in genuine leather version inside (standard version: in white leather for white lacquer carcase version or in black leather for core walnut carcase version; also available optionally in all artificial and genuine leather versions of the hülsta fabric collection) and with LED lamp; open compartment in optional wood/lacquer version, artificial leather or genuine leather; 160 cm wide This luminaire contains builtin LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V; 2.0 W GENUINE LEATHER GENUINE LEATHER 160 cm wide GENUINE LEATHER with open compartment in artificial leather with open compartment in genuine leather with open compartment in wood/ lacquer version with open compartment in artificial leather with open compartment in genuine leather with open compartment in wood/ lacquer version with open compartment in artificial leather with open compartment in genuine leather E Schlafen: ELUMO II Seite

20 Chests Chests 85.3 or cm high 45.2 cm deep Cover panel in optional wood/lacquer version, artificial leather or genuine leather; top drawer with hülstasoftflow, bottom drawers with hülstapushtoopen Please state all versions clearly in the order! ELUMO II Chest legs Standard chest legs highgloss chrome; alternatively: chest legs matt chrome, type 2000 without surcharge Chest with 4 drawers, 80 cm wide 519 with cover panel in wood/lacquer version 101,0 80 cm wide GENUINE LEATHER with cover panel in artificial leather with cover panel in genuine leather Chest with 4 drawers, 120 cm wide 518 with cover panel in wood/lacquer version 85,3 120 cm wide with cover panel in artificial leather GENUINE LEATHER with cover panel in genuine leather E Schlafen: ELUMO II Seite

21 Wall shelves Lists of versions: see page 19 Wall shelves 3.3 cm thick 21.5 cm deep For fitting anywhere on wall Max. load: 15 kg 60 cm wide 80 cm wide 120 cm wide Ancillary table Ancillary table 52.5 cm high Base plate of chrome, highgloss, Ø 38 cm; coneshaped column of wood; tabletop of stained glass, 0.8 cm thick, Ø 50 cm 564 Mirrors Mirrors 40.0 cm high 2.0 cm thick on black baseboard can be fitted horizontally or vertically 60 cm wide cm wide 120 cm wide E Schlafen: ELUMO II Seite

22 Table lamp Table lamp 41.0 cm high Lampshade cover black or white silk gloss outside, chrome colour inside; with pull switch This luminaire is compatible with lamps of the energy classes A to E. This luminaire is sold with a lamp of the energy class A. 230 V; 2x 7 W Table lamp black Table lamp white ELUMO II Ø 30.0 cm 560 Ø 30.0 cm 561 Remote control unit Switching is done by an external footswitch. A remote control unit is also available as an alternative, which is charged extra. The remote control unit incorporates one transmitter and one receiver which operate all the LED lamps. Extra transmitters are available against a surcharge. The footswitch is omitted when the remote control unit is employed. Remote control unit remote control unit (transmitter + receiver) type 1601 = extra transmitter type 1602 = extra receiver type 1603 = MagicTronic The lamps are normally operated by an external footswitch. As an alternative we can also provide a MagicTronic switch, which is charged extra. By stroking the outer or top side of the unit at the same level as the invisible integrated sensor it is possible to switch all the lamps on and off ( Stroking method ). As an alternative the position of the hidden sensor can also be marked with a small metal plate on the furniture unit ( Marking method ). Lamps with a maximum power of 200 W can be operated by a MagicTronic unit (230 V). The footswitch is omitted when a MagicTronic unit is included. Please be sure to observe the information and notes regarding the assembly position given in the Switch options for lamps chapter! 7617 E Schlafen: ELUMO II Seite

23 hülsta fabric collection Modern cover fabrics, hard wearing and easy to care for in a highquality. Type of material Material identification Fabric no. Colour Price group Smooth fabric of microfibres top: 100% polyester, below: 70% polyester, 30% cotton S305 dark grey / anthracite I S306 mauve / lilac I S308 light grey I S315 brown grey / taupe I S316 alabaster / beige I S318 marine / blue I S319 coal / black I Smooth fabric lined with fleece top: 100% polyester, below: 100% polyester, polar fleece S330 maize yellow I S331 almond white I S332 smoked quartz / taupe I S333 pepper I S334 slate I S336 sesame I S338 carambola I S339 golden olive I Chenille smooth fabric 73% polyester, 25% acrylic, 2% viscose S347 cream I S348 nut I S349 coffee I S350 black mocca I S351 khaki I S353 platinum grey I S354 brown anthracite I S355 deep brown I Smooth fabric 49% polyester, 30% acrylic, 21% cotton S356 white I S357 brilliant sand I S358 light brown I S359 chestnut I S362 medium blue I S363 grey blue I S364 grey black I Smooth fabric with wool effect 100% Polyester S230 light grey I S231 grey brown I S232 marine blue I S233 NEW anthracite I S234 dark grey blue I S235 grey violet I Smooth fabric, roughened 65% wool, 20% polyamide, 15% kashmir S521 anthracite II S523 taupe II S524 grey II S528 beige II 236 Smooth fabric lined with fleece top: 100% polyester, below: 100% polyester, polar fleece S594 white II S595 smoky II S596 lemon II S597 tin II S598 pebble II S599 parchment II E Schlafen: hülstabezugskollektion

24 Shaded grey = Fabrics with stain protection Type of material Material identification Fabric no. Colour Price group Smooth fabric, roughened 70% wool, 25% polyamide, 5% other fibres S401 brown II S402 blue II S403 petrol II S404 yellow II S405 violet II S406 pink II Smooth fabric with EverClean 100% polyester S411 ivory II S412 dark brown II S413 anthracite II S414 quartz grey II S415 saffron II S416 brown beige II Smooth fabric, velvet 92.5% polyester, 4.5% polyamide, 3% cotton S421 taupe II S422 sand II S423 tin II S424 black blue II S425 wine red II S426 grey white II Smooth fabric with linen 91% polyester, 5% linen, 4% polypropylene S500 taupe II S501 anthracite II S502 blue green II S503 beige rose II S504 white II S505 cream white II S506 beige II S507 brown II Artificial leather 72% polyvinyl chloride, 28% cotton S431 white II S432 teal blue II S433 black II S434 brown grey Plaids are not possible in artificial leather! II S436 dark brown II S437 taupe II S438 beige II Artificial leather with structure top: 100% polyurethane, below: 41% leather, 39% polyethylene, 20% cotton S450 cream white II S451 white II S452 dark brown II S453 taupe Plaids are not possible in artificial leather with structure! II S454 anthracite II S455 brown grey II S456 black II Nappa leather 100% Nappa leather, pigmented 5104 anthracite III 5105 black III 5108 white III 5119 nougat Plaids are not possible in Nappa leather! III 5122 sand III 5123 brown black III 5125 grey III E Schlafen: hülstabezugskollektion

25 Link to the assembly / user instruction movies Wardrobe interior fittings With these highquality interior fittings for wardrobes hülsta has developed a system that meets every individual furnishing needs. The great number of different unit types, a wide spectrum of sizes, as well as a variety of surface versions underline the great versatility and variability available. The wardrobe interior fittings can be used in every kind of wardrobe hingedoor, foldingdoor and slidingdoor wardrobes as well as in the MULTIFORMA II room system. There are many different sets of drawers for quick and easy planning. Contents Page Functional units A multitude of functional components are the main features of the wardrobe interior fittings: Range introduction, list of versions 238 Fitted shelves, protective mat 239 Centre partition kits, clothes lift 240 Clothes rods, tie holders, trouser holders, inside mirror, fabric boxes 241 Important notes on fitting drawers in wardrobes Sets of drawers Fitting at any level Accessories 249 Cover for sets of drawers 250 Wardrobe interior fittings in special width 251 Fitted shelves for straight and profiled units, also for panorama units and corner units Clothes rods for straight units and corner units LED illuminated shelves for straight units and hingedoor corner wardrobe, with automatic switch Centre partition kits and clothes lift Tie and trouser holders, also extendable Inside mirror for fitting on inside of wardrobe doors Fabric boxes Drawers For optimal use of wardrobes, all the drawers are available as single units or in sets. Because they can be fitted at any level it is possible to design wardrobe interior fittings individually. Drawers with wooden or glass front and shoe drawer Compartment for ties or linen for drawers with glass front Sets of drawers composed differently and made up of the units stated above For fitting at any level with carcases, different drawers and accessories Quality features hülstasoftflow: All drawers on hidden roller bearings with auto pullin feature with brake as fully pullout units Tie holder in highquality chrome version Drawer frames in standard grey Simple assembly due to the use of special brackets All inside surfaces have a side distance piece to ensure easy opening when the doors are open All wooden components optionally in different versions List of versions Model no. Versions White lacquer Light interior veneer Dark interior veneer Please state in the order the name and the model number of the range which the wardrobe interior fittings are intended for. Handle versions The drawer handles for the wardrobe interior fittings are delivered standard in the same version as the wardrobe door handles in which the interior fittings are incorporated (highgloss chrome or matt chrome). If the wardrobe door handles are required in wood or lacquer versions, please state the version of the drawer handles for the interior fittings clearly in the order! 238 E Schlafen: Innenausstattung Seite

26 Wardrobe interior fittings WARDROBE INTERIOR FITTINGS for wardrobe inside widths Type no. Fitted shelves 2.3 cm thick (2.6 cm thick, including support strut for 118 to 1 width) 28 cm wide components only in combination with centre partition kit for straight units 28 cm 38 cm 118 cm 128 cm 133 cm 138 cm L for profiled end units from MULTIFORMA II L R L R Fitted corner shelf for 45 corner unit, 2.3 cm thick without clothes rod with clothes rod NEW LED illuminated shelf 2.9 cm thick; with LEDlamp This luminaire contains builtin LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V; 11.0 W for straight units LED illuminated shelf 2.9 cm thick; with LEDlamp; with automatic switch and motion detector We do not recommend fitting these illuminated shelves in the MULTIFORMA II room system. This luminaire contains builtin LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V; W for straight units for hingedoor corner wardrobe without clothes rod with clothes rod 38 cm 118 cm 128 cm 133 cm 138 cm Presentation shelf 2.3 cm thick; with extra slat on the front rim, 6.0 cm high Fitted height: approx cm when fitted at an angle for straight units Protective mat of silvercoloured plastic; for presentation shelves for straight units E Schlafen: Innenausstattung Seite L/R = left/right

27 Wardrobe interior fittings List of versions: see page 238 for wardrobe inside widths Type no. Centre partition kit for wardrobes with unit inside widths of 78, 88 and, consisting of: 1 centre partition (153.0 cm high); 2 constructional shelves wide (fitted optionally left or right) for width: for width: for width: wide compartment with 2 constructional shelves; 28 cm open compartment wide compartment with 2 constructional shelves; 38 cm open compartment wide compartment with 2 constructional shelves; open compartment Additional extras: 28, 38, wide fitted shelves, clothes rods as well as wide drawers and sets If the centre partition kit is fitted in the MULTIFORMA II room system, please add a "1" to the type number (e.g ). Please state clearly in the order! 1 Raster high Total height: 22.2 cm 138 cm Centre partition kit for hinge and foldingdoor wardrobes as well as for open carcase units of the MULTIFORMA II room system with unit inside widths of 138, 158 and 1, consisting of: 1 centre partition (always in centre under constructional shelf) and 1 constructional shelf for 138 cm width: two wide compartments for 1 width: two wide compartments for 1 width: two wide compartments 2 Raster high Total height: 41.4 cm 3 Raster high Total height: 60.6 cm 138 cm cm Drawers and sets must be fitted in the centre partition kit (see pages ). The standard cover shelves of the sets of drawers are deducted from the price. 4 Raster high Total height: 79.8 cm 138 cm Raster high Total height: 99.0 cm 138 cm Clothes lift Twinarm, aluminiumcoloured, swingout clothes rod with brake mechanism Max. load: 10 kg for hingedoor wardrobes for folding and slidingdoor wardrobes 118 cm E Schlafen: Innenausstattung Seite

28 Wardrobe interior fittings WARDROBE INTERIOR FITTINGS for wardrobe inside widths Type no. Clothes rod chrome, uniform tubular metal with two supports 28 cm wide components only in combination with centre partition kit for straight units or for profiled end units 28 cm 38 cm 118 cm 128 cm 133 cm 138 cm Extendable tie holder chrome, fitted on clothes rod and rear wall of wardrobe carcase for 22 ties 21.3 cm high, 11.6 cm wide, 50.0 cm deep Extendable tie holder chrome, fitted on the inner side of wardrobe carcase for 17 ties 13.0 cm high, 9.0 cm wide, 54.0 cm deep Tie holder chrome, fitted on the left inner side of wardrobe carcase for 18 ties 29.5 cm high, 25.0 cm wide, 8.0 cm deep Tie holder chrome, fitted on the inner side of hingedoors for 3 ties 1.3 cm high, 26.0 cm wide, 5.0 cm deep Extendable trouser holder chrome, fitted on the inner side of wardrobe carcase for 3 pairs of trousers 26.0 cm high, 50.5 cm wide, 7.5 cm deep Inside mirror fitted on the inner side of and cm high as well as 40 and 50 cm wide, straight hingedoors Please state clearly in the order which hingedoors are to be fitted with an inside mirror The inside mirror cannot be fitted in MULTIFORMA II wardrobes in design F and F plus. E Schlafen: Innenausstattung Seite Fabric boxes with leather grip; colours: black or sand 33.0 cm wide, 50.0 cm deep black sand 8 cm high 16 cm high 24 cm high 8 cm high 16 cm high 24 cm high

29 Wardrobe interior fittings Important notes on fitting drawers in wardrobes List of versions: see page 238 Additional accessories (e.g. drawers, sets of drawers, etc.; see pages ) can be fitted in hinge, folding and slidingdoor wardrobes as well as in the MULTIFORMA II room system. These accessories must always be fitted on both sides of the wardrobe side sections or centre partitions, i.e. the accessories have the same width as the inside width of the appropriate wardrobe unit (see examples 1 and 36). It is, however, also possible to fit standalone accessories fitted at one side only. In this case, a cover for a set of drawers must be ordered extra (see examples 2, 7 and 8). It is not possible to fit accessories that stand alone at both sides! We differentiate between accessories for hingedoor wardrobes and for the MULTIFORMA II room system as well as accessories for foldingand slidingdoor wardrobes in the wardrobe interior fittings. Drawers in the accessories for hingedoor wardrobes and for the MULTIFORMA II room system are fitted with narrow sidesupport panels at both sides (see each of the lefthand wardrobe units in examples 1 and 2). Since folding or slidingdoors cannot be opened at the sides as far as hingedoors for constructional reasons, the accessories for folding and slidingdoor wardrobes are fitted with a narrow support panel at one side and with a wide support panel at the other side. That is why the accessories for folding and slidingdoor wardrobes are divided into accessories as "accessories left" = L (i.e. the wide sidesupport panel is fitted on the lefthand side of the accessory), and "accessories right" = R (i.e. the wide sidesupport panel is fitted on the righthand side of the accessory). With foldingdoor wardrobes, the wide support panel of the accessory must be fitted on the side of the foldingdoor unit where the foldingdoors are mounted (see each of the middle and righthand wardrobe units in examples 1 and 2 as well as example 3). Please note: A sideward distance of up to a max. 5 cm must be kept to the side wall so that the foldingdoors can be opened widely enough. The space depends on the intended handle. We recommend getting advice from hülsta if necessary. With 2 and 4door slidingdoor wardrobes, the wide support panel of the accessory must always be fitted on the inside of the slidingdoor unit (see examples 4 and 6). The same applies to the outside units of a 3door slidingdoor wardrobe. The accessory of the middle unit must always be fitted with the wide support panel on the left (see example 5). If the accessory is fitted as a standalone unit at one side with a cover for a set of drawers (see examples 2, 7 and 8), the same applies as described above. If 2 sets of drawers are fitted adjacently please use the centre partition kit shown on page 240 (see example 3). The standard cover shelves of the sets of drawers are deducted from the price. Please note: The sketches on pages show the accessories for hingedoor wardrobes (i.e. with narrow sidesupport panels at both sides)! Example 1 Hinge/foldingdoor wardrobe Example 2 Hinge/foldingdoor wardrobe L R L R A B B A: Accessory in hingedoor unit with narrow support panels at both sides B: Accessory in foldingdoor unit with wide support panel at the side, where the door is mounted C D D C: Accessory, standalone at one side, in hingedoor unit with narrow support panels at both sides D: Accessory in foldingdoor unit, stand alone, at one side, with wide support panel at the side, where the door is mounted 242 L/R = Support panel left/right E Schlafen: Innenausstattung Seite

30 Wardrobe interior fittings Example 3 Foldingdoor wardrobe: Panorama unit with 5 Raster high centre partition kit Example 4 2door slidingdoor wardrobe WARDROBE INTERIOR FITTINGS L R R L E E F F E: Accessory in foldingdoor wardrobe with wide support panel at the side, where the door is mounted F: Accessory in slidingdoor wardrobe with wide support panel at the side on the inside of the slidingdoor unit Example 5 3door slidingdoor wardrobe Example 6 4door slidingdoor wardrobe R L L R L R L G: Accessory in slidingdoor wardrobe with wide support panel at the side on the inside of the slidingdoor unit H: Accessory in slidingdoor wardrobe in the centre unit with a standard wide support panel on the lefthand side Example 7 2door slidingdoor wardrobe G H G I: Accessory in slidingdoor wardrobe with wide support panel at the side on the inside of the slidingdoor unit J: Accessory in slidingdoor wardrobe in the lefthand centre unit with a standard wide support panel on the lefthand side K: Accessory in slidingdoor wardrobe in the righthand centre unit with a standard wide support panel on the righthand side Example 8 4door slidingdoor wardrobe I J K I R R R L L R L M N O P Q L: Accessory, standalone at one side, in slidingdoor wardrobe with wide support panel at the side on the inside of the slidingdoor unit M: Since the accessory in the righthand unit of the slidingdoor wardrobe is mounted as a standalone unit on the side and does not reach as far as the inside wall of the slidingdoor unit, the wide support panel can also be fitted on the outer side wall of the slidingdoor unit. E Schlafen: Innenausstattung Seite L/R = Support panel left/right N: Accessory, standalone at one side, in slidingdoor wardrobe with wide support panel at the side on the inside of the slidingdoor unit O: Accessory, standalone at one side, in slidingdoor wardrobe in the lefthand centre unit with a standard wide support panel on the lefthand side P: Accessory, standalone at one side, in slidingdoor wardrobe in the righthand centre unit with a standard wide support panel on the righthand side Q: Since the accessory in the righthand unit of the slidingdoor wardrobe is mounted as a standalone unit on the side and does not reach as far as the inside wall of the slidingdoor unit, the wide support panel can also be fitted on the outer side wall of the slidingdoor unit. 243

31 Wardrobe interior fittings List of versions: see page 238 Sets of drawers Sets of drawers as a complete unit consisting of top cover shelf, block sides and different drawers. If sets of drawers are stacked, the cover shelf of the bottom set of drawers is omitted and can be deducted from the price. A cover for a set of drawers must be fitted for mounting the units as standalone units at one side. If 2 sets of drawers are fitted adjacently please use the centre partition kit (see page 240). For fitting at any level and accessories: see pages ! Please state clearly in the order if the sets are to be fitted in a hingedoor wardrobe or in the MULTIFORMA II room system! for wardrobe inside widths Type no. for hingedoor wardrobes and MULTIFORMA II room system Type no. for folding and slidingdoor wardrobes Set 1 1 drawer with wooden front Total height: 21.5 cm L L L L L L R R R R R R Set 2 1 drawer with glass front Total height: 21.5 cm L L L L L L R R R R R R Set 3 1 shoe drawer Total height: 40.7 cm L L L L R R R R Set 4 2 drawers with wooden front Total height: 40.7 cm L L L L L L R R R R R R Set 5 1 drawer with glass front 1 drawer with wooden front Total height: 40.7 cm L L L L L L R R R R R R Set 6 2 drawers with glass front Total height: 40.7 cm L L L L L L R R R R R R 244 L/R = left/right (see here pages ) E Schlafen: Innenausstattung Seite

32 Wardrobe interior fittings WARDROBE INTERIOR FITTINGS Sets of drawers Sets of drawers as a complete unit consisting of top cover shelf, block sides and different drawers. If sets of drawers are stacked, the cover shelf of the bottom set of drawers is omitted and can be deducted from the price. A cover for a set of drawers must be fitted for mounting the units as standalone units at one side. If 2 sets of drawers are fitted adjacently please use the centre partition kit (see page 240). For fitting at any level and accessories: see pages ! Please state clearly in the order if the sets are to be fitted in a hingedoor wardrobe or in the MULTIFORMA II room system! for wardrobe inside widths Type no. for hingedoor wardrobes and MULTIFORMA II room system Type no. for folding and slidingdoor wardrobes Set 7 3 drawers with wooden front Total height: 59.9 cm L L L L L L R R R R R R Set 8 1 drawer with glass front 2 drawers with wooden front Total height: 59.9 cm L L L L L L R R R R R R Set 9 2 drawers with glass front 1 drawer with wooden front Total height: 59.9 cm L L L L L L R R R R R R Set 10 1 drawer with wooden front 1 shoe drawer Total height: 59.9 cm L L L L R R R R Set 11 4 drawers with wooden front Total height: 79.1 cm L L L L L L R R R R R R Set 12 1 drawer with glass front 3 drawers with wooden front Total height: 79.1 cm L L L L L L R R R R R R Set 13 2 drawers with glass front 2 drawers with wooden front Total height: 79.1 cm L L L L L L R R R R R R E Schlafen: Innenausstattung Seite L/R = left/right (see here pages ) 245

33 Wardrobe interior fittings List of versions: see page 238 Sets of drawers Sets of drawers as a complete unit consisting of top cover shelf, block sides and different drawers. If sets of drawers are stacked, the cover shelf of the bottom set of drawers is omitted and can be deducted from the price. A cover for a set of drawers must be fitted for mounting the units as standalone units at one side. If 2 sets of drawers are fitted adjacently please use the centre partition kit (see page 240). For fitting at any level and accessories: see pages ! Please state clearly in the order if the sets are to be fitted in a hingedoor wardrobe or in the MULTIFORMA II room system! for wardrobe inside widths Type no. for hingedoor wardrobes and MULTIFORMA II room system Type no. for folding and slidingdoor wardrobes Set 14 5 drawers with wooden front Total height: 98.3 cm L L L L L L R R R R R R Set 15 1 drawer with glass front 4 drawers with wooden front Total height: 98.3 cm L L L L L L R R R R R R Set 16 2 drawers with glass front 3 drawers with wooden front Total height: 98.3 cm L L L L L L R R R R R R Cover for sets of drawers The cover for sets of drawers is necessary when sets of drawers are fitted as standalone units at one side in the wardrobe (example: a wide set is fitted in a wardrobe with an inside width of so that one side of the set is fitted on the interior side of the wardrobe and the other side of the set stands alone in the wardrobe centre). See here page 250! 246 L/R = left/right (see here pages ) E Schlafen: Innenausstattung Seite

34 Wardrobe interior fittings WARDROBE INTERIOR FITTINGS Fitting at any level Besides being able to fit complete sets of drawers, it is also possible to plan wardrobe interior fittings individually. All carcases, consisting of the top cover shelf and block sides, can be fitted individually with different drawers. A cover for a set of drawers must be fitted for mounting the units as standalone units at one side in a wardrobe. If 2 carcases are fitted adjacently, the centre partition kit must be used (see page 240). Complete sets of drawers: see pages ! Accessories: see page 249! Please state clearly in the order if the carcases are to be fitted in a hingedoor wardrobe or in the MULTIFORMA II room system! for wardrobe inside widths Type no. for hingedoor wardrobes and MULTIFORMA II room system Type no. for folding and slidingdoor wardrobes 1 Raster carcase Total height: 21.5 cm L L L L L L R R R R R R 2 Raster carcase Total height: 40.7 cm L L L L L L R R R R R R 3 Raster carcase Total height: 59.9 cm L L L L L L R R R R R R 4 Raster carcase Total height: 79.1 cm L L L L L L R R R R R R 5 Raster carcase Total height: 98.3 cm L L L L L L R R R R R R Cover for sets of drawers The cover for sets of drawers is necessary when carcases are fitted as standalone units at one side in the wardrobe (example: a wide carcase is fitted in a wardrobe with an inside width of so that one side of the carcase is fitted on the interior side of the wardrobe and the other side of the carcase stands alone in the wardrobe centre). See here page 250! E Schlafen: Innenausstattung Seite L/R = left/right (see here pages ) 247

35 Wardrobe interior fittings List of versions: see page 238 Fitting at any level Besides being able to fit complete sets of drawers, it is also possible to plan wardrobe interior fittings individually. All carcases, consisting of the top cover shelf and block sides, can be fitted individually with different drawers. A cover for a set of drawers must be fitted for mounting the units as standalone units at one side in a wardrobe. If 2 carcases are fitted adjacently, the centre partition kit must be used (see page 240). Complete sets of drawers: see pages ! Accessories: see page 249! for wardrobe inside widths Type no. for hingedoor wardrobes and MULTIFORMA II room system Type no. for folding and slidingdoor wardrobes 1 Raster drawer with wooden front 19.2 cm high Raster drawer with glass front 19.2 cm high Raster shoe drawer with metal shelf; fits approx. shoe size cm high E Schlafen: Innenausstattung Seite

36 Wardrobe interior fittings WARDROBE INTERIOR FITTINGS Accessories The drawers in the sets of drawers and the carcases for fitting at any level can be fitted with drawer compartments. The pullout trouser holder is meant for fitting on the inner side of the wardrobe. The storage bowl enhances the pullout trouser holder in the form of an additional extra. for wardrobe inside widths Type no. for hingedoor wardrobes and MULTIFORMA II room system Type no. for folding and slidingdoor wardrobes Compartment for ties We recommend only fitting these compartments in drawers with glass fronts. 5.6 cm high Number of compartments for ties: for wardrobe Hingedoors/ Foldingdoors/ inside width: room system slidingdoors Compartment for linen We recommend only fitting these compartments in drawers with glass fronts. 5.6 cm high Number of compartments for linen: for wardrobe Hingedoors/ Foldingdoors/ inside width: room system slidingdoors Pullout trouser holder incl. top wooden cover shelf, block sides and storage bowl (storage bowl in 3 compartments, 2.7 cm high, 24.3 cm wide, 10.7 cm deep, of grey plastic, resting in rear area of trouser holder); for fitting on inner side of wardrobe at 98.3 cm height Total height of pullout trouser holder including cover shelf: 21.5 cm; block 19.2 cm high, 55.0 cm deep L L L L R R R R Number of compartments for trousers / number of storage bowls: for wardrobe Hingedoors/ Foldingdoors/ inside width: room system slidingdoors 10 / 1 12 / 2 10 / 1 14 / 2 12 / 2 16 / 2 14 / 2 16 / 2 If the cover shelf is fitted in the MULTIFORMA II room system, please add a "1" to the type number (e.g ). Please state clearly in the order! Cover shelf 2.3 cm thick E Schlafen: Innenausstattung Seite L/R = left/right (see here pages )

37 Wardrobe interior fittings List of versions: see page 238 Cover for sets of drawers (standalone at one side); consisting of block sides and a top cover shelf. The cover for sets of drawers is necessary when sets of drawers and carcases are fitted as standalone units at one side in the wardrobe (example: a wide set is fitted in a wardrobe with an inside width of so that one side of the set is fitted on the interior side of the wardrobe and the other side of the set stands alone in the wardrobe centre). Note: The standard cover shelf of the sets of drawers or carcases is automatically removed from the set or carcase. The cost of the special cover for the set of drawers or carcases is offset against the cost of this standard cover. If the cover for sets of drawers is to be fitted in the MULTIFORMA II room system, please add a "1" to the type number (e.g ). Please state clearly in the order! for wardrobe inside widths Type no. for hingedoor wardrobes and MULTIFORMA II room system Type no. for folding and slidingdoor wardrobes for 1 Raster height for 2 Raster height Cover for sets of drawers for 3 Raster height for 4 Raster height for 5 Raster height E Schlafen: Innenausstattung Seite

38 Wardrobe interior fittings WARDROBE INTERIOR FITTINGS Wardrobe interior fittings in special width In order to exploit the area available inside the wardrobes in special width optimally, it is also possible to order the wardrobe interior fittings in special width for these units. Cover shelf and side panels in special width type See below for two examples of calculation! Hingedoor wardrobes and MULTIFORMA II room system The standard sets of drawers and carcases for fitting at any level in hingedoor wardrobes and in the MULTIFORMA II room system have slim 4.5 cm wide side panels fitted at both sides (see here pages ). These panel sizes are different in the case of wardrobe interior fittings in special width. If a hingedoor wardrobe, for example, is required in the special wardrobe inside width of 64 cm, the wardrobe interior fittings must be fitted in the next smaller standard size that means the required wardrobe interior fittings are in a width of. The difference in width of 6 cm that results is balanced out by making the 4.5 cm wide side panels 3 cm wider (= 7.5 cm each). Foldingdoor and slidingdoor wardrobes The standard sets of drawers and carcases for fitting at any level in folding and slidingdoor wardrobes are fitted with a slim 4.5 cm wide side panel at one side and a wide 14.5 cm wide side panel at the other side (see here pages ). The panel size of the slim panel is different in the case of wardrobe interior fittings in special width. If a foldingdoor wardrobe, for example, is required in the special wardrobe inside width of 82 cm, the wardrobe interior fittings must be fitted in the next smaller standard size that means the required wardrobe interior fittings are in a width of. The difference in width of 4 cm that results is balanced out by making the 4.5 cm wide side panel 4 cm wider (= 8.5 cm), the 14.5 cm wide side panel always retains its original width. L/R = left/right (see here pages ) Special wardrobe inside width of 64 cm 64 Special wardrobe inside width of 82 cm 82 L Standard width of wardrobe interior fittings of 58 Standard width of wardrobe interior fittings of 78 The panel width now comes to 7.5 cm each 3 4,5 4,5 3 7,5 7,5 Large side panel width always remains in original size of 14.5 cm, the slim side panel width is now 8.5 cm 4,5 4 14,5 8,5 E Schlafen: Innenausstattung Seite

39 Switch options for lamps: MagicTronic MagicTronic The lamps are normally operated by an external footswitch. As an alternative we can also provide a MagicTronic switch, which is charged extra. By stroking the outer or top side of the unit at the same level as the invisible integrated sensor it is possible to switch all the lamps on and off ( Stroking method ). As an alternative the position of the hidden sensor can also be marked with a small metal plate on the furniture unit ( Marking method ). Lamps with a maximum power of 200 W can be operated by a MagicTronic unit (230 V). The footswitch is omitted when a MagicTronic unit is included. Standard position of MagicTronic for angled shelves: for angled shelves of the CUTARO and METIS plus ranges: sensor is fitted 8 cm from the top rim and 8 cm from the left side in the rear wall panel for angled shelves of the LUNIS range: sensor is fitted 16 cm from the rear rim and 9.6 cm from the left side in the shelf Standard position of MagicTronic for consoles and chests: for consoles and chests of the ELUMO II and LUNIS ranges: sensor is fitted 16 cm from the rear rim in the cover shelf and 15.0 cm at the side next to the bed for consoles and chests of the MULTIVARIS range: sensor is fitted 12 cm from the rear rim in the outer side next to the bed and in approx. 715 cm from the top rim of the unit Standard position of MagicTronic for MULTIFORMA II wardrobes: for hinge and foldingdoor wardrobes of the MULTIFORMA II range: sensor is fitted in the right passepartout in approx. 130 cm height (MagicTronic is not possible for wardrobes without passepartout, in slidingdoor wardrobes and in the room and niche system) Alternative positions: If the MagicTronic sensor is to be fitted on the right in the rear wall panel or in the shelf of angled shelves, in the left passepartout of the wardrobe or at any position other than that stated as standard (e.g., if a unit is planned in a niche so that there is insufficient space to the right of the unit), please state this clearly in the order and mark the position in the sketch. If in doubt, please contact your hülsta customer advisor! MagicTronic Illustration 1: Stroking method Illustration 2: Marking method E Schlafen: Schaltmöglichkeiten

40 Switch options for lamps: MagicTronic Examples of use (schematic diagrams) Example 1 Black point = Standard position of MagicTronic sensor for angled shelves Notes: The black point in the drawings is the area where the MagicTronic sensor is invisibly integrated. If the surface is stroked at this position, the lamps are switched on or off. for angled shelves of the CUTARO and METIS plus ranges If you would like to mark the position of the MagicTronic sensor on the furniture, you can fit a small metal plate supplied separately at the corresponding position. for angled shelves of the LUNIS range Example 2 Black point = Standard position of MagicTronic sensor for consoles and chests Notes: The black point in the drawings is the area where the MagicTronic sensor is invisibly integrated. If the surface is stroked at this position, the lamps are switched on or off. If you would like to mark the position of the MagicTronic sensor on the furniture, you can fit a small metal plate supplied separately at the corresponding position. for consoles and chests of the ELUMO II and LUNIS ranges for consoles and chests of the MULTIVARIS range Example 3 Black point = Standard position of MagicTronic sensor for hinge and foldingdoor wardrobes of the MULTIFORMA II range Notes: The black point in the drawings is the area where the MagicTronic sensor is invisibly integrated. If the surface is stroked at this position, the lamps are switched on or off. If you would like to mark the position of the MagicTronic sensor on the furniture, you can fit a small metal plate supplied separately at the corresponding position. for hinge and foldingdoor wardrobes of the MULTIFORMA II range E Schlafen: Schaltmöglichkeiten

41 Switch options for lamps: Remote control unit with changing colours Remote control unit with changing colours The lamps are normally operated by an external footswitch. The colour temperature of the LED lamps is cold white if a footswitch is used. A 4channel remote control unit (= transmitter), which is charged extra, is also available as an alternative. Several lamps (up to a total load of a maximum 30 W per transformer and receiver) can be operated with each of the 4 channels. All 4 channels can be dimmed separately at the push of a button. The colour temperature of all 4 channels can be set from cold white (= the basic setting of the LED lamps) to warm white. If warm white is required, a radio remote control unit must be ordered. It is also possible to switch all channels on and off simultaneously with the all on or all off buttons. Up to 4 transmitters can operate as many receivers as required. Transmitters and receivers must be ordered separately. The footswitch is omitted when the remote control unit is used. The following points must be noted with the radio remote control unit: The receiver must be positioned behind a rear wall or under plinth shelves (at least 20 mm space required under plinth shelves). The total wattage power of all lamps included per power supply unit/receiver must not exceed 30 W. 4 channels = 4 light groups 1 light group = x lights All lamps within a light group can be dimmed to the same brightness. The same light colour can be set for all lamps in all the light groups. This light colour is then valid for all the lamps. The remote control unit is not suitable for equipment operating on 110 V! Important notes: The information on basic settings for the LED lamps as well as setting the colour temperature do not apply to the MEGADESIGN and MULTIVARIS ranges! Please be sure to note the operating and programming instructions! 4channel remote control unit with changing colours Light colour warmer Light colour colder Channel 1 to 4 (with dimmer function) All off All on 4channel remote control unit with changing colours Price per transmitter type Price per receiver type E Schlafen: Schaltmöglichkeiten

42 Switch options for lamps: Remote control unit with changing colours Examples of use (schematic diagrams) Example 1 Lights inside a unit Channel 1 operates (and dims) all the lights in light group 1, i.e. the spotlamp in the left cabinet Channel 2 operates (and dims) all the lights in light group 2, i.e. the spotlamps in the unit above the TV bench Channel 3 operates (and dims) all the lights in light group 3, i.e. the spotlamp in the right cabinet Required are: 1 transmitter 1x type 1 receiver 1x type Notes: The total wattage power of all lamps included per power supply unit/ receiver must not exceed 30 W. The same light colour can be set for all lamps in all the light groups. This light colour is then valid for all the lamps Channel 2 Channel 1 Channel 3 Example 2 Lights in units set apart Channel 1 operates (and dims) all the lights in light group 1, i.e. the spotlamp and the light panels in the left cabinet Channel 2 operates (and dims) all the lights in light group 2, i.e. the light panels and the spotlamps in the centre cabinet 1 2 Channel 3 operates (and dims) all the lights in light group 3, i.e. the spotlamp in the right cabinet Required are: 1 transmitter 1x type 3 receivers 3x type Notes: The total wattage power of all lamps included per power supply unit/ receiver must not exceed 30 W. The same light colour can be set for all lamps in all the light groups. This light colour is then valid for all the lamps. 1 Channel 1 Channel 2 Channel 3 Example 3 Lights in units set apart Channel 1 operates (and dims) all the lights in light group 1, i.e. the spotlamps in the left, centre and right cabinet Channel 2 operates (and dims) all the lights in light group 2, i.e. the top light panels in the left, centre and right cabinet Channel 3 operates (and dims) all the lights in light group 3, i.e. the bottom light panels in the left, centre and right cabinet Required are: 1 transmitter 1x type 3 receivers 3x type Notes: The total wattage power of all lamps included per power supply unit/ receiver must not exceed 30 W. The same light colour can be set for all lamps in all the light groups. This light colour is then valid for all the lamps. 3 Channel 2 Channel 3 Channel 1 E Schlafen: Schaltmöglichkeiten

43 Wall composition / assembly instruction Important notes: The composition of walls must be ascertained before concluding a contract and be checked by a qualified fitter before assembly takes place. Assembly may only be carried out by a qualified fitter under careful observation of the assembly instructions. The plastic Rawl plugs with the type name SX 8 x 65 from the Fischer Company supplied by hülsta as a standard set are only suitable for concrete C12/15, if the wall composition and compression strength corresponds to the table below. Under no circumstances must a unit be assembled on light masonry. Furthermore, we provide a mounting set with assembly mortar from the Fischer Company for the types of walls listed below (see assembly mortar set below). Again, assembly must be carried out by a qualified fitter under careful observation of the wall composition and assembly instruction. The compression strength levels stated below must be met under all circumstances. Materials table with a description of which sets are to be used with the following types of walls: Standard set (SX 8 x 65) Concrete C12/15 Compression strength 15 N/mm² Assembly mortar set only suitable for the materials stated below! Building bricks Mz 12 Compression strength 12 N/mm² Solid blocks of light concrete V2 Compression strength 2 N/mm² Limestone blocks KS 12 Compression strength 12 N/mm² Perforated blocks of light concrete Hbl 2 Compression strength 2 N/mm² Perforated sand lime bricks KSL12 Compression strength 12 N/mm² Aerated concrete PP2 Compression strength 2 N/mm² Vertically perforated bricks HLz 12 Compression strength 12 N/mm² Bulk density 1.0 kg/dm³ A different and more suitable type of mounting must be chosen by a qualified fitter in all other cases. hülsta cannot accept any responsibility for the choice of any other types of mounting! Please note that if the units are not mounted properly on the wall, there is a risk of the units falling down or tipping over especially when alternative mounting materials acquired on site have been used. Generally speaking, you as a dealer/qualified fitter are responsible for the correct wall mounting of the units. Mounting sets Labelling in type list drawings / assembly notes for wall units The majority of units have two wall mounting points (= number of support boards), if these are to be fitted as wall units. This is not explicitly mentioned in the type list. If a different number of wall mounting points (= support boards) is required, this is marked in the drawings in the type list with numbers in black boxes. Every support board requires four mounting screws. 3 4 = 3 support boards = 4 support boards, etc. One assembly mortar set is sufficient for up to a maximum of 3 support boards or 4 wall sidepanels. Important note: Depending on the composition of the wall (see wall types illustrated above), assembly must be carried out using the special assembly mortar set and a standard trade mastic tool which are the basic essentials for safe and clean workmanship. Standard set The standard set consists of 4 plastic Rawl plugs (SX 8 x 65) and 4 mounting screws and is sufficient for 1 support board. The standard sets are included in the packet of fittings to match the number of support boards. Assembly mortar set for up to a maximum of 3 support boards consisting of: 9x injection retaining sleeve 9x screwin sleeve 1x injection cartridge 2x static mixer 1x assembly instructions Please use the mounting screws from the standard set (supplied free of charge). Example of order: Add up number of support boards for all existing unit types Divide the sum by 3 Round up the result to a full number = Number of assembly mortar sets required M2 310 All prices stated are recommended retail prices. E Schlafen: Wandbeschaffenheit