CUBO media furniture TYPE LIST

Transcription

1 TYPE LIST p. 2-6 p. 7-8 p p. 17 p. 18 Programme / technical information Suggestions Body elements Accessories Top panels Valid from

2 CUBO media furniture - the design The CUBO media furniture series was designed to accommodate media modules. Whether hi-fi, subwoofer, soundbar or Blu-ray player: all conventional devices can quickly and easily be placed inside and are connected with each other with the aid of practical cable outlets. Unsightly cables vanish behind magnetically closing screens. The result: a tidy living room enhances the listening pleasure. All devices can be conveniently controlled via infrared remote control. Clever: for brilliant sound reproduction, Sudbrock uses perforated front elements made of metal. They can be lacquered in the same shade as the main module and are more elegant and easier to care for than conventional fronts made of fabric. Another plus in terms of creative freedom: the media furniture series stems from the same system as CUBO, so the furniture design fits seamlessly into the home living programme by Sudbrock. It combines perfectly with all the CUBO units, lowboards, sideboards and highboards. Closed mitred (smooth lacquer) is the standard. Bodies with high-gloss outer sides are not available closed mitred. "Open" mitred Now available on request on smooth lacquered finishes. Bodies with high-gloss outer sides are now made "open mitred". Closed mitred (veneer) Standard CUBO media furniture - the system The modular-designed media furniture is available in different heights and widths, with doors, s, flaps and open compartments. All fronts are rebated, i.e. their frames are concealed by the doors. Whether positioned on the floor or hanging the possible combinations are versatile. If there are several modules standing side by side, continuous top panels can be delivered upon request (including top panels made of glass). And as always at Sudbrock, the selection of shades (smooth lacquer and high-gloss) and woods is broad. CUBO media furniture - the veneers Fronts to a height of 3 grids are horizontally veneered as standard, higher fronts are veneered vertically. 2

3 CUBO media furniture - technical information Heights Grid = = /3 1 = = /3 = Body height in cm plus swivel feet (1.8 cm) and top panel (0.6 / 1 cm) 24.0 (base unit) s Body Insert shelf Insert shelf behind flap Glass insert shelf Clear depth Top panel cm 40.0 cm 34.0 cm 39.5 cm 40.6 cm 45.0 cm standard foot 1.8 cm s Outer dimension Inner dimension with a centre panel 30.0 cm 26.2 cm cm 36.2 cm cm 56.2 cm cm 66.2 cm cm 76.2 cm cm 96.2 cm 2x 46.2 cm cm cm 2x 56.2 cm cm cm 2x 66.2 cm Maximum length top panel 1.0 cm: Maximum length glass top panel 0.6 cm: 320 cm 300 cm 3

4 The finishes Price group 10 Price group 20 Veneer Veneer Smooth lacquer 103 Wild oak (knot-free) 102 Ethno oak (knotty) 405 Shell grey 454 Oriental red 121 Anthracite oak 115 Natural walnut 407 Stone grey 465 Sienna 124 Coffee wild oak 132 Light cherry 408 Terra 467 Bordeaux 125 Core beech 143 Cognac cherry 409 Magnolia 469 Cashmere 127 Milk oak 155 Milk oak (knotty) 411 Onyx grey 474 Mocha 129 Sahara oak 417 Sage 475 Sky 153 Grey oak 420 Traffic white 477 Indian red (RAL 9016) 480 Brick red Smooth lacquer 432 Pacific blue 481 Antique pink 419 Blossom white 435 Bluish black 490 Curry (similar to RAL 9010) 437 Quartz 494 Cana grey 439 Black 496 Super lemon For a type from different price groups, the higher price group will be calculated in full. Special colours (does not apply to special high-gloss colours): If you would prefer something else, please choose your preferred colour from the RAL, Sikkens or NCS colour chart. Surcharge per colour plus 10% on the value of the items in a special colour: Example: Frame lacquering Drawer frame and bottom lacquered in body colour. Surcharge per. 4

5 Plinth variants STANDARD swivel feet, 18 mm Alternatively (at the same price) Plinth trim, 26 mm Plinth including height adjusters 10 cm high to 70 cm to to to 180 cm to Continuous plinth plate 26 mm thick - If several bodies are planned to go beside each other, then the plinth plate will be made in one piece to a length of 320 cm. Please note: The excerpt for subwoofer are not possible. - Surcharge continuous plinth plate - with height adjusters - Finish same colour as body as standard cm 4 height adjusters 6 height adjusters 8 height adjusters to cm 180 cm 200 cm 240 cm 280 cm 320 cm 42.3 cm 42.3 cm 42.3 cm 42.3 cm 42.3 cm 42.3 cm 42.3 cm 42.3 cm 42.3 cm 5

6 Cable management Single element Cable outlet rectangular (optional) Cable can be fed behind the shortened bottom. Cable outlet round Outer side left (optional) Side view Outer sides on the inside with two or more add-on elements cable outlet round (standard) Cable outlet round Outer side right (optional) Device cables are stowed in the bottom rear of the body. By default, there is a round cable outlet located behind a perforated sheet flap. Cable outlet round back panel (optional) Cable outlet round (Ø 60 mm aluminium coloured) Please state position per item, as above. e.g.: Cable outlet round, outer side left Cable outlet rectangular Cable outlet rectangular, aluminium coloured, for body including top panel (bodies with a centre panel have the cable outlet in the middle above it) Milling dimensions: 7.2 x 15.2 cm fitted: Cable outlet in body (1 drill hole) Back panel trim for elements with a 1/2 grid or 2/3 grid compartment (maximum width 80 cm) Back panel trim with magnetic attachment Please order along with the sound elements. For elements with several centre panels, the back panel trims must be ordered separately for each compartment. Top view 15 mm distance from the wall Back panel The back panel trim can only be used to conceal cables, multiple sockets, routers etc. Compartments for devices are to be planned without trims. Back panel trims Body side Back panel trim Device cables can be concealed from the front with magnetic trims. 6

7 Suggestions Suggestion 1 W H D 50.8 cm Body,, H50.8 W30 D45 Body,, H50.8 W30 D Body, 2 flaps, H 50.8 W80 D45 Top panel, 150 x Suggestion 2 W H D cm Body, 2 flaps, H50.8 W60 D45 Body, 2 flaps, H50.8 W60 D Body,, H50.8 W140 D Top panel, 280 x Suggestion 3 W H D 2 75 cm Body, 1 door left, 2 grids, W60 D Body,, 2 grids, W 140, D Body, 1 door right, 2 grids, W 60, D Top panel, 280 x Suggestion 4 W H D 2 75 cm Body, 3 s, 2 grids, W 60, D Body,,, , 2 grids, W 140, D 45 Body, 3 s, 2 grids, W 60, D 45 Top panel, 280 x 7

8 Suggestions Suggestion 5 W H D 2 72 cm Body, 3 s, 2 grids, W 80, D Body, for subwoofer, 2 grids, W 40, D Body, 2 flaps, 1, 2 grids, W 140, D Top panel, 280 x Suggestion 6 W H D 220 cm 75 cm Body, for subwoofer, 2 grids, W 40, D 45 Body, 1,, 2 grids, W 140, D Body, for subwoofer, 2 grids, W 40, D Top panel, 240 x Suggestion 8 W H D 220 cm 75 cm Body,, 2 grids, W 30, D 45 3 s, 2 grids, W 60, D 45 Body, for subwoofer, 2 grids, W 40, D 45 Body, 1 door, 2 grids, W 60, D 45 Body,, 2 grids, W 30, D Top panel, 240x Suggestion 61 W H D 300 cm 190 cm 35 / Body, 2 perforated sheet flaps, 1 1/3 grids, W 140, D 45 Body,, 1, 1 1/3 grids, W 60, D 45 Body,, 1, 1 1/3 grids, W 60, D 45 Plinth frame, H 10, 250 x 37.6 cm Glass top panel, frosted, 6 mm, 280 x reduction to Body, 3 grids, W 30, D Door, 3 grids, W Body, 3 grids, W 80, D Door, 3 grids, W 2 x 40 Body, 10 mm, 3 grids, W 20, D 34.7 Accessories: Back panel trim with magnetic attachment Cable outlet rectangular for glass top panel Wall shelf, 40 mm, 180 x 25 cm 8

9 Elements, 24.0 cm high - (2/3 grids) 40 cm Body height plus swivel feet (1.8 cm) + top panel 1 shortened centre panel centre panel * All elements are available as wall-hanging versions at the same price (height minus 1.8 cm). * These elements are only available as wall-hanging versions with heavy-duty fittings. Surcharge:

10 Elements, 36.1 cm high - (1 grid) 40 cm with shortened centre panel Body height plus swivel feet (1.8 cm) + top panel Cut-out for subwoofer in the base of the body diameter: 22 cm Subwoofer-Ausschnitt bei nicht möglich! Body element can only be planned with leg, not with continuous plinth plate * shortened centre panel behind perforated sheet flap shortened centre panel behind perforated sheet flap, centre panel behind flap 70 cm 1 centre panel cm All elements are available as wall-hanging versions at the same price (height minus 1.8 cm). * These elements are only available as wall-hanging versions with heavy-duty fittings. Surcharge:

11 Elements, 48.0 cm high - (1 1/3 grids) 1 door 1 insert shelf 30 cm Body height plus swivel feet (1.8 cm) + top panel 40 cm insert shelf 80 cm 1 centre panel, 2 insert shelves without insert shelf 30 cm 40 cm Cut-out for subwoofer in the base of the body diameter: 22 cm Body element can only be planned with leg, not with continuous plinth plate 2 flaps 70 cm 80 cm 1 centre panel cm 80 cm 1 centre panel * 1 70 cm 80 cm * * All elements are available as wall-hanging versions at the same price (height minus 1.8 cm). * These elements are only available as wall-hanging versions with heavy-duty fittings. Surcharge:

12 Elements, 48 cm high - (1 1/3 grids) 2 shortened s Body height plus swivel feet (1.8 cm) + top panel * centre panel behind flap * shortened centre panel behind perforated sheet flap 2 shortened s * shortened centre panel behind perforated sheet flap 2 perforated sheet flaps shortened centre panel behind perforated sheet flap, centre panel behind flap shortened centre panel behind perforated sheet flap Elements, 54.1 cm high - (1.5 grids) 2 insert shelves Body height plus swivel feet (1.8 cm) + top panel * * shortened centre panel behind perforated sheet flap shortened centre panel behind perforated sheet flap, centre panel behind flap All elements are available as wall-hanging versions at the same price (height minus 1.8 cm). * These elements are only available as wall-hanging versions with heavy-duty fittings. Surcharge:

13 Elements, 72.2 cm hoch - (2 grids) 1 door 1 insert shelf 30 cm Body height plus swivel feet (1.8 cm) + top panel 40 cm without insert shelf 30 cm 40 cm Cut-out for subwoofer in the base of the body diameter: 22 cm Body element can only be planned with leg, not with continuous plinth plate 1 insert shelf 70 cm 80 cm 1 centre panel 1 1/3 grids 2/3 grid * 1 1 insert shelf 2/3 grids 1 1/3 grids 70 cm 80 cm 1 centre panel * 1 insert shelf 2/3 grid 1 1/3 grids shortened centre panel behind perforated sheet flap, centre panel behind flap 2 s cm 80 cm * * All elements are available as wall-hanging versions at the same price (height minus 1.8 cm). * These elements are only available as wall-hanging versions with heavy-duty fittings. Surcharge:

14 Elements, 72.2 cm high - (2 grids) 2 flaps 70 cm 80 cm Body height plus swivel feet (1.8 cm) + top panel 1 centre panel * 1 70 cm 80 cm 1 centre panel * * shortened centre panel behind perforated sheet flap, centre panel behind flap 2 flaps 1 shortened centre panel shortened centre panel behind perforated sheet flap, centre panels behind flaps * All elements are available as wall-hanging versions at the same price (height minus 1.8 cm). * These elements are only available as wall-hanging versions with heavy-duty fittings. Surcharge:

15 Detail view from top: - Top panel "inclusive" - 2 removable trim strips Pillar cupboards, 1 grid high cm 1 black TV stand Body height including swivel feet (1.8 cm) and top panel (1 cm) 1 black TV stand centre panel behind flap A TV support must always be ordered for the TV stand. shortened centre panel behind perforated sheet flap A TV support must always be ordered for the TV stand. 1 black TV stand 2 insert shelves with centre panel with centre panel 1 with centre panel centre panel behind flap A TV support must always be ordered for the TV stand. 1 black TV stand centre panel behind flap, shortened centre panel behind perforated sheet flap A TV support must always be ordered for the TV stand. Accessories TV attachment compliant with the VESA standard Fixed support - tiltable swivel attachment - forward-extending All elements are available as wall-hanging versions at the same price (height minus 1.8 cm). Wall-hanging elements contain a supporting bracket that must be attached at the centre under the pillar. 15

16 Pillar cupboards, 1 1/3 grids high cm 1 black TV stand Body height including swivel feet (1.8 cm) and top panel (1 cm) centre panel behind flap, shortened centre panel behind perforated sheet flap A TV support must always be ordered for the TV stand. 1 black TV stand shortened centre panel behind perforated sheet flap, at, there is also a centre panel between 2 frames A TV support must always be ordered for the TV stand. 1 black TV stand with centre panel centre panel behind flap, at, there is also a centre panel between 2 frames A TV support must always be ordered for the TV stand. 1 black TV stand 2 insert shelves with centre panel with centre panel centre panel behind flap A TV support must always be ordered for the TV stand. Accessories TV attachment compliant with the VESA standard Fixed support - tiltable swivel attachment - forward-extending All elements are available as wall-hanging versions at the same price (height minus 1.8 cm). Wall-hanging elements contain a supporting bracket that must be attached at the centre under the pillar. 16

17 Accessories Cable outlet round diameter 6 cm Cable outlet round diameter 6 cm free positionable (not possible with glass top panels) free positionable for glass top panel (minimum gap from the glass edge 80 mm) Cable outlet rectangular 16 x 8 cm Cable outlet rectangular 16 x 8 cm free positionable (not possible with glass top panels) free positionable for glass top panel (minimum gap from the glass edge 80 mm) Back panel trim with magnetic attachment The back panel trim can only be used to conceal cables, multiple sockets, routers etc. Compartments for devices are to be planned without trims. max. width 80 cm for elements with a 1/2 grid or 2/3 grid compartment

18 Top panels Top panel 70 cm 10 mm thick Veneered or lacquered 150 cm 200 cm 240 cm 280 cm 320 cm If several bodies are planned to go beside each other, then the top panel will be made in one piece to a length of 320 cm. Glass top panel 6 mm thick Colour lacquered in all standard lacquer colours 70 cm 150 cm 200 cm 240 cm 280 cm 300 cm If several bodies are planned to go beside each other, then the top panel will be made in one piece to a length of 300 cm. Glass top panel 6 mm thick Frosted Colour lacquered in all standard lacquer colours 70 cm 150 cm 200 cm 240 cm 280 cm 300 cm If several bodies are planned to go beside each other, then the top panel will be made in one piece to a length of 300 cm. 18

19

20 Company / Furniture store Body: Front: Handle: Other: Route: Week: Order confirmation no. Order Body height: Item listing Qty. Order no. Item listing Qty. Order no cm cm cm cm 74 cm 37.9 cm 1.8 cm Body height plus swivel foot cm. :