Products & Accessories

Transcription

1 Products & Accessories CONJET AB P.O. BOX 507 SE HANINGE SWEDEN PHONE +46 (0) FAX +46 (0) WEBSITE APPLIED WATERJET TECHNOLOGY

2 Index Index Page Robot Robot 432 D... 4 Robot Jetframe Jetframe Computer Control Unit Power packs... 9 Rotor assembly High pressure spray guns Swivel connector Rotor jet Tankcleaners High pressure hoses Lances Angle connectors Stabilizers Nozzle holders Nozzle nuts Wire mesh Jointing nipples Tandem blocks Nozzles Protective products Products and Accessories 2

3 Robot 365 MPA Robot 365 The most versatile Hydrodemolition Robot with superior reach and stability on the market. Robot 365 MPA with its versatile Multi Purpose Arm is designed for: - Horizontal concrete removal - Vertical concrete removal (up to 6.4 m) - Under up concrete removal (up to 6.0 m) - Below wheel base (down to 3.3 m) - Circular tunnels with special feed beam* - Surface preparation with hydraulic rotor* - Scarifying with double lance* Stability through large extendable wheel base up to 2.8 m (9 ft) Adjustable height of steering wheels in order to improve positioning of the feed beam Powered by electricity - no exhaust gases - no health threat for operator PLC based, Closed Loop Control Monitoring System 4 fixed preloaded programs with possibility to save 16 user defined programs Two level cut, i.e. concrete is removed to two different depths in one pass Reactivation button for safety reasons Remote control with cable or radio* Emergency stop circuit securing Robot and Powerpack Cable or Bluetooth* interface with Conjet Powerpacks Technical Data Lenght Width over wheels Width transport Cutting width standard Cutting height under up Cutting height vertical Cutting below wheel level Height minimun Weight Power supply 11 kw 3400 mm 1880 mm mm 2300 mm 2100 mm 6000 mm 6400 mm 3300 mm 1770 mm 2400 kg V,32 A 3 Products and Accessories

4 Robot 432D Robot 432D The most powerful Hydrodemolition Robot on the market, for large scale horizontal surfaces. Robot 432 Diesel with its heavy duty protective hood can handle the largest pumps and achieve the highest production in the market and it is designed for: - Horizontal concrete removal - Surface preparation with hydraulic rotor* - Scarifying with double lance* High removal capacity - rated for pump power up to 1100 kw (1500 hp) The PLC based control system monitors the process and is easy to learn and use Two level cut, i.e. concrete is removed to two different depths in one pass Wheels that provide stability and good manouverability Diesel engine powered Reactivation button for safety reasons Remote control with cable or radio* Emergency stop circuit securing Robot and Powerpack Cable or Bluetooth* interface with Conjet Powerpacks Technical Data Lenght Width over wheels Width transportation/operation Cutting height standard Height Weight Max permitted reaction force Products and Accessories mm 1880 mm 2200/2660 mm 2200 mm 1500 mm 2500 kg 4000 N

5 Robot 324 Robot 324 The most compact, light weight flexible and cost effective Hydrodemolition Robot on the market. The compact Robot 324 is designed for: - Confined spaces and easy operation - Horizontal concrete removal - Vertical concrete removal - Under up concrete removal - Below track level concrete removal - Circular tunnels - Steel and concrete tubes - Pillars with and without tower* - Steep sloops with the winch kit* - Surface preparation with hydraulic rotor* - Scarifying with double lance* Low weight makes it ideal for operating on platforms and scaffoldings Powered by electricity - no exhaust gases - no health threat for operator Easy to operate and manoeuvre PLC based control system monitors the process and is easy to learn and use Reactivation button for safety reasons Remote control with cable or radio* Emergency stop circuit securing Robot and Powerpack Cable or Bluetooth* interface with Conjet Powerpacks Technical Data Lenght 2350 mm Width over tracks 820 mm mm Width feed beam 1520 mm Cutting width 1600 mm Cutting height max/with extens / 2450 mm Height carrier 1170 mm Weight 1100 kg Max permitted reaction force 1400 N / 950 N 5 Products and Accessories

6 Jetframe 101 Jetframe 101 The smallest mechanised hydrodemolition unit on the market, replaces hand lances. Jetframe 101 Nalta is designed for: Improved operator safety and increased productivity Low weight - can be handled by single operator Small size - can be brought in through man holes Mounts on standard scaffolding tubes Handles curved surfaces down with radii down to 400 mm Rotor for surface preparation as option 2-3 times faster than manual lances Technical Data Lenght feed beam section 1000 mm Weight oscillating cassette 12 kg Weight step unit 9 kg Weight, hydraulic control unit 90 kg Max permitted reaction force 600 N Power supply 230 V, 10 A Products and Accessories 6

7 Jetframe 114 Jetframe 114 Heavy duty Jetframe to be mounted on carrier for extended reach or bolted to surfaces in confined spaces. Jetframe 114 has been designed for: Areas out of reach for robots Can be fitted to a tool carrier e.g. skylift access platform, fork lift or crane Easy to bolt to concrete surfaces Support legs Controllable from Conjet CCU or Conjet Robot A hydraulic driven rotor*, a single or double lance* can be attached Under water use* Technical Data Lenght standard Width standard Cutting width Cutting lenght standard Height Weight Max permitted reaction force 4000 mm 2000 mm 2150 mm 3500 mm 500 mm 300 kg 2000 N 7 Products and Accessories

8 Computer control unit 208 CCU 208 CCU 208 controls the movements and functions of Jetframes and additional accessories. CCU 208 is a hydraulic unit with following features: PLC based, Closed Loop Control Monitoring System 4 fixed preloaded programs with possibility to save 16 user defined programs Two level cut, i.e. concrete is removed to two different depths in one pass Reactivation button for safety reasons Remote control with cable or radio* Emergency stop circuit securing Robot and Powerpack Cable or Bluetooth* interface with Conjet Powerpacks Technical Data Lenght 1400 mm (4 ft 7 in ) Width over tracks 700 mm (2 ft 4 in ) Height 1250 mm (4 ft 1 in ) Weight 440 kg (970 lb ) Products and Accessories 8

9 Powerpack Powerpack Probably the most reliable high pressure water pump installation designed and built for contractors. Conjet Powerpacks are designed for: Operating 24 hours/day, 7 days/week - Reliable High Pressure Pump - Reliable engine from Caterpillar - Dimensions as a 20 ft ISO container - Rigid design - Certified for sea freight Safety - Designed to improve operator and third parties safety - Remotely controlled from Robot or CCU - Integrated emergency stop circuits - Pump/engine separated from control room - Separate room for storage of parts, hoses, etc - Theft and vandalism proof design. Environmental - Exhaust emission meets U.S. EPA and EU regulations - Silenced to meet noise emission regulations - Insulated to meet different climate conditions - Over spill tray with grating floor to collect, oil, cooling water, or fuel Technical Data Type-kW Flow Pressure Reaction l/min (gal/min) bar (P.S.I.) force (N) kW 116 (31) 1150 (17000) kW 96 (25) 1350 (19600) kW 128 (34) 1550 (20300) kW 163 (43) 1150 (16700) kW 256(68) 1000 (14500) kW 205 (54) 1200 (17400) kW 160 (42) 1400 (20000) kW 342(90) 1150 (16700) kW 268 (71) 1450 (20000) Products and Accessories

10 Hydraulic Rotor Conjet Hydraulic Rotor Hydraulic Rotor: 1500 bar (21750 psi) / 250 lpm (66 gpm) Ordering No.: The rotor can be attached to Conjet Robot 362, 363, 364 or 365 and the Conjet Jetframe 114. It is attached to the cradle on the feed beam. The rotor is normally equipped with 2-4 nozzles for concrete removal and up to 4 nozzles for surface preparation. The rotor enables the robot to make a rough surface and can efficiently clean the surface, remove membrane from concrete surfaces or remove up to mm (¾-1¼ in) of concrete. Technical Data Operating pressure Flow rate Speed of rotation Nozzle inserts: Nozzle: Operating pressure (oil) Flow rate (oil) Max1500 bar (21750 psi) Max 250 L/min r.p.m 4 pcs diametre 400 mm Type A Max 250 bar 16 L/min at 1000 r.p.m Conjet Hydraulic Rotor Hydraulic Rotor: 2500 bar (36250 psi) / 150 lpm (40 gpm) Ordering No.: The rotor can be attached to Conjet Robot 362, 363, 364 or 365 and the Conjet Jetframe 114. It is attached to the cradle on the feed beam. The rotor is normally equipped with 2-4 nozzles for concrete removal and up to 20 nozzles for surface preparation. The rotor enables the robot to make a rough surface and can efficiently clean the surface, remove membrane from concrete surfaces or remove up to mm (¾-1¼ in) of concrete. Technical Data Operating pressure Flow rate Speed of rotation Nozzle inserts Nozzle Operating pressure (oil) Flow rate (oil) Max2500 bar (36250 psi) Max 150 L/min r.p.m 20 pcs diametre 400 mm Type P or T Max 250 bar 16 L/min at 1000 r.p.m Note: Hydraulic rotors are available for Robot 432, but require a special feed beam or cradle. Contact Conjet for further details. Products and Accessories 10

11 Hydraulic Rotor Conjet Hydraulic Rotor Hydraulic Rotor 1500 bar (21750 psi) / 100 lpm (26 gpm) Ordering No.: The rotor can be attached to Conjet Robot 322/324 and the Conjet Jetframe 102. It is attached to the cradle on the feed beam. The rotor is normally equipped with 2-4 nozzles for concrete removal and up to 20 nozzles for surface preparation. The rotor enables the robot to make a rough surface and can efficiently clean the surface, remove membrane from concrete surfaces or remove up to mm (¾-1¼ in) of concrete. Technical Data Operating pressure Flow rate Speed of rotation Nozzle inserts Nozzle Operating pressure (oil) Flow rate (oil) Max1500 bar (21750 psi) Max 100 L/min r.p.m 4/8 pcs Type G Max 250 bar 30 L/min at 3000 r.p.m Conjet Hydraulic Rotor Hydraulic Rotor 3000 bar (43500 psi) / 40 lpm (10,5 gpm) Ordering No.: The rotor can be attached to Conjet Robot 322/324 and the Conjet Jetframe 102. It is attached to the cradle on the feed beam. The rotor is normally equipped with 2-4 nozzles for concrete removal and up to 20 nozzles for surface preparation. The rotor enables the robot to make a rough surface and can efficiently clean the surface, remove membrane from concrete surfaces or remove up to mm (¾-1¼ in) of concrete. Technical Data Operating pressure Flow rate Speed of rotation Nozzle inserts Nozzle Operating pressure (oil) Flow rate (oil) Max3000 bar (43500 psi) Max 40 L/min r.p.m 4/8/20 pcs Type G Max 250 bar 30 L/min at 3000 r.p.m 11 Products and Accessories

12 Hydraulic Rotor Rotor vacuum dome for shipcleaning Hydraulic Rotor 3000 bar (43500 psi) / 60 lpm Ordering No.: The vacuum dome serves a protective hood for the rotor attached to the robot. A vacuum suction unit can be connected to the dome in order to collect waste water and paint and rust residuals. This is mainly used for ship cleaning and other paint removal applications. Technical Data Operating pressure Flow rate Speed of rotation Nozzle inserts Nozzle Operating pressure (oil) Flow rate (oil) Max3000 bar (43500 psi) Max 60 L/min r.p.m 16 pcs Type P Max 250 bar 30 L/min at 3000 r.p.m Products and Accessories 12

13 Spray gun High pressure Spray Guns - Electric Type SP 1000 M Handgrip of high impact plastic Forged stainless steel valve housing Front handgrip, swivel position adjustable Safety catch in safety lever With the safety lever over 80% less strenght is reguired to operate and hold the trigger compared to conventional guns Knurled nut type nozzle holder with wear indicator Enables nozzle change without the need for tools Type SP 1000 ME As SP 1000 Built-in Reed switch, for intrinsically safe circuit Ex (i) 24 Volt control signal Technical data Max. operation pressure Max. flow rate at 5 bar Connection thread Length (750 mm lance) Weight Nozzles 1000 bar (14500 psi) 33 l/min M 22 x 1.5 male 1020 mm (SP1000M+ME) 3.5 kg (SP1000M) 4.0 kg (SP1000ME) Type A / B Type Length of lance Ordering No. SP 1000 M 750 mm SP 1000 M 1000 mm SP 1000 ME 750 mm SP 1000 ME 1000 mm Products and Accessories

14 Spray gun High pressure Spray Guns Mechanical Bypass Type SP 3000 MB High impact plastic handgrip Front handgrip, swivel position adjustable Forged stainless steel valve housing Safety catch in safety lever With the safety lever over 80% less strenght is reguired to operate and hold the trigger compared to conventional guns Bypass valve via hand operation directly at the gun Low maintenance seal cassette Technical data Max. operation pressure Max. flow rate at 5 bar Connection thread Pressure screw Pressure ring Length (750 mm lance) Weight:(750 mm lance) Nozzles 3000 Bar (43500 psi) 30 l/min M 26 x 1.5 male M 14 x 1.5 LH female 990 mm 3.5 kg Type P / T Type Length of lance Code no. SP 3000 MB 750 mm Products and Accessories 14

15 Spray gun High pressure Spray Guns Electrical Type SP 3000 E High impact plastic handgrip Stainless steel connection housing for lance and high pressure hose Front handgrip, swivel position adjustable Built-in Reed switch, for intrinsically safe circuit Ex (i) 24 Volt control signal Safety catch in safety lever With the safety lever over 80% less strenght is reguired to operate and hold the trigger compared to conventional guns Technical data Max. operation pressure: Max. flow rate at 5 bar: Connection thread Pressure screw: Pressure ring: Length (750 mm lance): Weight:(750 mm lance): Nozzles: 3000 Bar (43500 psi) 30 l/min M 26 x 1.5 male M 14 x 1.5 LH female 1005 mm 3.4 kg Type P / T Type Length of lance Ordering No. SP 3000 E 750 mm Products and Accessories

16 Spray gun High pressure Spray Guns Under water Mechanical Bypass Type SP 1000 M UW High impact plastic handgrip Steinless steel connection housing for lance and high pressure hose Front handgrip, swivel position adjustable Safety catch in the safety lever With the safety lever over 80% less stength is required to operate and hold the trigger compared with conventional guns Bypass valve via hand operation directly at the gun Low maintenance seal cassette Built-in Reed switch, for intrinsically safe circuit Ex (i) 24 Volt control signal. Reaction force free handling (exclusively for operation under water). Technical data Max. operation pressure Max. flow rate at 5 bar Connection thread Length Weight Nozzles 1000 Bar (43500 psi) 33 l/min M 22 x 1.5 female 1330 mm 8.7 kg Type A / B Type Length of lance Ordering No. SP 1000 MB-UW 500 mm Products and Accessories 16

17 Spray gun High pressure Spray Guns Under water Mechanical Bypass Type SP 3000 MB UW High impact plastic handgrip Steinless steel connection housing for lance and high pressure hose Front handgrip, swivel position adjustable Safety catch in the safety lever With the safety lever over 80% less stength is required to operate and hold the trigger compared with conventional guns Bypass valve via hand operation directly at the gun Low maintenance seal cassette Built-in Reed switch, for intrinsically safe circuit Ex (i) 24 Volt control signal. Reaction force free handling (exclusively for operation under water). Technical data Max. operation pressure Max. flow rate at 5 bar Connection thread Pressure screw Pressure ring Length (750 mm lance) Weight Nozzles 3000 Bar (43500 psi) 30 l/min M 26 x 1.5 male M 14 x 1.5 LH female 1900 mm 9.2 kg Type P + T Type Length of lance Code no. SP 3000 MB UW 750 mm Products and Accessories

18 Spray gun High pressure Spray Guns Ergoblast Electrical SP 3000 Ergoblast The straight through (from inlet to nozzle) lance has no sharp bends or restrictions. This design reduces pressure loss, eliminates turbulence and ensures a smooth flow witch results in a more efficient water jet emitting the nozzle Trigger pressure eliminated Integrated body stock for reaction forces > 150 N Only one gun required for all types of blasting. It can be outfitted with single nozzles, rotorjets or pneumatically powererd nozzle heads Can be held and supported in many different positions High reliability Robust, fully encapsulated electronics No moving parts No mechanical wear No seals or housing orifices Manufactured from wear resistant, long life materials Cost effictiveness The ergonomic design puts much less physical strain on the operator which means less fatigue so there is increased utilisation. Quite simply there is more efficient actual blasting for longer period of time per shift Use of high strength materials and the absence of moving parts means that there are no maintenance costs Versatile accessories Example: Ergoblast with rotorjet Technical data Max. operation pressure Max. flow rate at 5 bar Connection thread Pressure screw Pressure ring Length Weight 3000 Bar (43500 psi) 45 l/min M 26 x 1.5 male M 14 x 1.5 LH female 1000 mm 5.0 kg Type Code no. SP 3000 Ergoblast Products and Accessories 18

19 Swivel Products and Accessories

20 Rotorjet Products and Accessories 20

21 Rotorjet Products and Accessories

22 Rotorjet Products and Accessories 22

23 Rotorjet 23 Products and Accessories

24 Aquamat tankcleaners Products and Accessories 24

25 High pressure hoses 25 Products and Accessories

26 High pressure hoses 2240DN - High pressure tube cleaning hose Applications High pressure service for tube cleaning applications such as heat exchangers in the chemical and oil refining industries. Application as flexible lance at working pressures of 75 Mpa and higher. Construction Core tube Pressure reinforcement Cover Color Polyoxymethylene Two spiral layers of high tensile steel wire Polyamide Blue Temperature Range - 10ºC up to +70ºC Ordering number DN Operating pressure Hose lenght Min. bend radius Hose o/d Connectors bar psi (m) (mm) (mm) /8 NPT - 1/8 NPT /8 NPT - 1/8 NPT /8 NPT - 1/8 NPT /4 NPT - 1/4 NPT /8 NPT - 3/8 NPT Products and Accessories 26

27 High pressure hoses 2380N - High pressure Hose Applications High pressure service for the construction and shipbuilding industries and for general industri cleaning applications. Mainly used to remove different kinds of dirt accumulation, or materials from various surfaces, such as those in tanks, from concrete and asphalt, etc. Construction Core tube Pressure reinforcement Cover Color Polyamide Two spiral layers and two open spiral layers of high tensile steel wire Polyurethane, DN32: Polyamide Black Temperature Range - 10ºC up to +70ºC for water jetting Ordering number DN Operating pressure Hose lenght Min. bend radius Hose o/d Connectors bar psi (m) (mm) (mm) M18 x 1,5 - M18 x 1, ,7 M24 x 1,5 - M24 x 1,5 27 Products and Accessories

28 High pressure hoses 2388N - High pressure Hose Applications High pressure service for the construction and shipbuilding industries and for general industri cleaning applications. Mainly used to remove different kinds of dirt accumulation, or materials from various surfaces, such as those in tanks, from concrete and asphalt. Construction Core tube Pressure reinforcement Cover Color Polyamide Two spiral layers and two open spiral layers of high tensile steel wire Polyurethane Blue for water jetting Temperature Range - 10ºC up to +70ºC for water jetting Ordering number DN Operating pressure Hose lenght Min. bend radius Hose o/d Connectors bar psi (m) (mm) (mm) M24 x 1,5 - G¼ Male M24 x 1,5 - M24 x 1, ( ¹ ) M24 x 1,5 - M24 x 1,5 ( ¹ ) High pressure hose with extra PVC (yellow) protection Other hoses/connectors can be delivered on request. Products and Accessories 28

29 High pressure hoses 2580N - High pressure water jetting hose Applications High pressure service for the construction and shipbuilding industries and for general industri cleaning applications. Mainly used to remove different kinds of dirt accumulation, or materials from various surfaces, such as those in tanks, from concrete and asphalt. Construction Core tube Pressure reinforcement Cover Color Polyamide Four spiral layers and two open spiral layers of high tensile steel wire Polyurethane Dark blue Temperature Range - 10ºC up to +70ºC Ordering number DN Operating pressure bar psi Hose lenght (m) Min. bend radius (mm) Hose o/d (mm) Connectors M24 x 1,5 - M24 x 1, M24 x 1,5 - M24 x 1, M24 x 1,5 - M24 x 1, M24 x 1,5 - M24 x 1, M36 x 2 - M36 x M36 x 2 - M36 x 2 29 Products and Accessories

30 High pressure hoses 2440N - Ultra-high pressure water jetting hose Applications Ultra-high pressure service for the construction and shipbuilding industries and for general industri cleaning applications. Mainly used for hydrodemolition and removal of accumulated dirt and materials from surfaces such as concrete, asphalt and tanks. For use with petroleum or synthetic hydraulic fluids, gas and chemical fluids. Especially suitable for hydraulic pre-tensioning equipment, test rigs, as well as in offshore oil applications. Construction Temperature Range Core tube Pressure reinforcement Cover Color - 10ºC up to +70ºC DN 4-8: Polyoxymethylene; DN 10-25: Polyamide Four spiral layers of maximum tensile steel wire Polyamide DN 4-8: blue; DN 10-25: black Ordering number DN Operating pressure Hose lenght Min. bend radius Hose o/d Connectors bar psi (m) (mm) (mm) ,4 M22 x 1,5 - M22 x 1, ,4 M24 x 1,5 - M24 x 1, ,4 M24 x 1,5-3/8 NPT ( ¹ ) M24 x 1,5 - M24 x 1, ( ¹ ) M24 x 1,5 - M24 x 1,5 ( ¹ ) M24 x 1,5 - M24 x 1, M24 x 1,5 - M24 x 1,5 ( ¹ ) UNF UNF ( ¹ ) ,0+ M36 x 2 - M36 x ( ¹ ) ,0+ M36 x 2 - M36 x ,0 M36 x 2 - M36 x 2 ( ¹ ) ,0+ 1 5/16-12UNF - 1 5/16-12UNF ( ¹ ) High pressure hose with extra PVC (yellow) protection Other hoses/connectors can be delivered on request. Products and Accessories 30

31 High pressure hoses 2640D / 2640N - Ultra-high pressure water jetting hose Applications Ultra-high pressure service for the construction and shipbuilding industries and for general industri cleaning applications. Mainly used for hydrodemolition and removal of accumulated dirt and materials from surfaces such as concrete, asphalt and tanks. For use with petroleum or synthetic hydraulic fluids, gas and chemical fluids. Especially suitable for hydraulic pre-tensioning equipment, test rigs, as well as in offshore oil applications. Construction Temperature Range Core tube Pressure reinforcement Cover Color - 10ºC up to +70ºC DN 4-8: Polyoxymethylene; DN 10-25: Polyamide Six spiral layers of maximum tensile steel wire Polyamide Blue Ordering number DN Operating pressure bar psi Hose lenght (m) Min. bend radius (mm) Hose o/d (mm) Connectors M14 x 1,5 - M14 x 1,5 LH M14 x 1,5 - M14 x 1,5 LH ( ¹ ) M24 x 1,5 - M24 x 1,5 ( ¹ ) M24 x 1,5 - M24 x 1,5 ( ¹ ) M24 x 1,5 - M24 x 1, ( ¹ ) UNF UNF ( ¹ ) M36 x 2 - M36 x 2 ( ¹ ) M36 x 2 - M36 x ( ¹ ) M36 x 2 - M36 x ( ¹ ) /16-12UNF - 1 5/16-12UNF ( ¹ ) High pressure hose with extra PVC (yellow) protection Other hoses/connectors can be delivered on request. 31 Products and Accessories

32 High pressure hoses 2648N - Ultra-high pressure water jetting hose Applications Ultra-high pressure service for the construction and shipbuilding industries and for general industri cleaning applications. Mainly used for hydrodemolition and removal of accumulated dirt and materials from surfaces such as concrete, asphalt and tanks. Construction Temperature Range Core tube Pressure reinforcement Cover Color - 10ºC up to +70ºC Polyamide Six spiral layers of maximum tensile steel wire Polyamide Blue ( ¹ ) Min. bend Ordering number DN Operating pressure Hose lenght radius Hose o/d Connectors M36 x 2 - M36 x 2 bar psi (m) (mm) (mm) ( ¹ ) M36 x 2 - M36 x ( ¹ ) /16-12UNF - 1 5/16-12UNF ( ¹ ) High pressure hose with extra PVC (yellow) protection Other hoses/connectors can be delivered on request. Products and Accessories 32

33 High pressure hoses 2740D - Ultra-high pressure water jetting hose Applications For very-high pressure lances with working pressures up to 300 MPa for the construction and shipbuilding industries or for common industri cleaning applications. Mainly used for hydrodemolition and removal of accumulated dirt and materials from surfaces such as concrete, asphalt and tanks. Construction Temperature Range Core tube Pressure reinforcement Cover Color - 10ºC up to +70ºC Polyoxymethylene Six spiral layers of maximum tensile steel wire DN4: Polyurethane, DN5-12: Polyamide DN4: yellow, DN5-8: red, DN12: black Ordering number DN Operating pressure bar psi Hose lenght (m) Min. bend radius (mm) Hose o/d (mm) Connectors M14 x 1,5 - M14 x 1, M14 x 1,5 - M14 x 1, /16 UNF - 9/16 UNF /8-24UNF- 3/8-24UNF M14 x 1,5 - M14 x 1, M14 x 1,5 - M14 x 1, M14 x 1,5 - M14 x 1, /16 UNF - 9/16 UNF /16 UNF - 9/16 UNF Other hoses/connectors can be delivered on request. All hoses is with left threads. 33 Products and Accessories

34 High pressure hoses 2741D - Ultra-high pressure water jetting hose Applications For very-high pressure lances with working pressures up to 300 MPa for the construction and shipbuilding industries or for common industri cleaning applications. Mainly used for hydrodemolition and removal of accumulated dirt and materials from surfaces such as concrete, asphalt and tanks. Construction Temperature Range Core tube Pressure reinforcement Cover Color - 10ºC up to +70ºC Polyoxymethylene Six spiral layers of maximum tensile steel wire 1 st : Polyamide, 2 nd : Polyurethane, abrasion resistant 1 st : Red; 2 nd : Black Ordering number DN Operating pressure bar psi Hose lenght (m) Min. bend radius (mm) Hose o/d (mm) Connectors ,2 M14 x 1,5 - M14 x 1, ,2 M14 x 1,5 - M14 x 1, ,2 9/16 UNF - 9/16 UNF ,2 9/16 UNF - 9/16 UNF Other hoses/connectors can be delivered on request. All hoses is with left threads. Products and Accessories 34

35 High pressure hoses 2748D - Ultra-high pressure water jetting hose Applications For very-high pressure lances with working pressures up to 300 MPa for the construction and shipbuilding industries or for common industri cleaning applications. Mainly used for hydrodemolition and removal of accumulated dirt and materials from surfaces such as concrete, asphalt and tanks. Construction Core tube Pressure reinforcement Cover Color Polyoxymethylene Six spiral layers of maximum tensile steel wire Polyamideresistant Red Temperature Range - 10ºC up to +70ºC Ordering number DN Operating pressure Hose lenght Min. bend radius Hose o/d Connectors bar psi (m) (mm) (mm) ,3 M14 x 1,5 - M14 x 1, ,3 M14 x 1,5 - M14 x 1, ,3 9/16 UNF - 9/16 UNF ,3 9/16 UNF - 9/16 UNF ( ¹ ) High pressure hose with extra PVC (yellow) protection. Other hoses/connectors can be delivered on request. All hoses is with left threads. 35 Products and Accessories

36 High pressure hoses 2748D - Ultra-high pressure water jetting hose Applications For very-high pressure lances with working pressures up to 300 MPa for the construction and shipbuilding industries or for common industri cleaning applications. Mainly used for hydrodemolition and removal of accumulated dirt and materials from surfaces such as concrete, asphalt and tanks. Construction Temperature Range Core tube Pressure reinforcement Cover Color - 10ºC up to +70ºC Polyoxymethylene Six spiral layers of maximum tensile steel wire 1 st : Polyamide, 2 nd : Polyurethane, abrasion resistant 1 st : Red; 2 nd : Yellow Ordering number DN Operating pressure bar psi Hose lenght (m) Min. bend radius (mm) Hose o/d (mm) Connectors ,8 M14 x 1,5 - M14 x 1, ,8 M14 x 1,5 - M14 x 1, ,8 9/16 UNF - 9/16 UNF ,8 9/16 UNF - 9/16 UNF Other hoses/connectors can be delivered on request. All hoses is with left threads. Products and Accessories 36

37 High pressure hoses 2840D - Ultra-high pressure water jetting hose for ultra-high pressure water jetting Applications Ultra-high pressure service for water jet cutting equipment with water only or with abrasive additives. Replaces steel pipe where flexibility is important. Compression forming (hydroforming): A manufacturing procedure applying water pressure to produce complex hollow parts made from pipe-like basic materials. Construction Core tube Pressure reinforcement Cover Color Polyoxymethylene Eight spiral layers of maximum tensile steel wire Polyamide DN5:red, DN8: yellow, DN12 black Temperature Range - 10ºC up to +70ºC Min. bend Ordering number DN Operating pressure Hose lenght radius Hose o/d Connectors bar psi (m) (mm) (mm) ,5 M14 x 1,5 - M14 x 1, ,5 M14 x 1,5 - M14 x 1, ,5 9/16 UNF - 9/16 UNF Other hoses/connectors can be delivered on request. All hoses is with left threads. 37 Products and Accessories

38 High pressure hoses 2841D - Ultra-high pressure water jetting hose for ultra-high pressure water jetting Applications Ultra-high pressure service for water jet cutting equipment with water only or with abrasive additives. Replaces steel pipe where flexibility is important. Compression forming (hydroforming): A manufacturing procedure applying water pressure to produce complex hollow parts made from pipe-like basic materials. Construction Temperature Range Core tube Pressure reinforcement Cover Color - 10ºC up to +70ºC Polyoxymethylene Eight spiral layers of maximum tensile steel wire 1 st: :Polyamide; 2nd: Polyurehane, abrasion resistant 1st::Yellow; 2 nd : Grey Ordering number DN Operating pressure bar psi Hose lenght (m) Min. bend radius (mm) Hose o/d (mm) Connectors ,5 M14 x 1,5 - M14 x 1, ,5 M14 x 1,5 - M14 x 1, ,5 9/16 UNF - 9/16 UNF Other hoses/connectors can be delivered on request. All hoses is with left threads. Products and Accessories 38

39 High pressure hoses 2848D - Ultra-high pressure water jetting hose for ultra-high pressure water jetting Applications Ultra-high pressure service for water jet cutting equipment with water only or with abrasive additives. Replaces steel pipe where flexibility is important. Compression forming (hydroforming): A manufacturing procedure applying water pressure to produce complex hollow parts made from pipe-like basic materials. Construction Core tube Pressure reinforcement Cover Color Polyoxymethylene Eight spiral layers of maximum tensile steel wire Polyamide Red Temperature Range - 10ºC up to +70ºC Ordering number DN Operating pressure bar psi Hose lenght (m) Min. bend radius (mm) Hose o/d (mm) Connectors ,6 M14 x 1,5 - M14 x 1,5 (1) ,6+ M14 x 1,5 - M14 x 1, ,6 9/16 UNF - 9/16 UNF ( ¹ ) High pressure hose with extra PVC (yellow) protection. Other hoses/connectors can be delivered on request. All hoses is with left threads. 39 Products and Accessories

40 High pressure hoses 2849D - Ultra-high pressure water jetting hose for ultra-high pressure water jetting Applications Ultra-high pressure service for water jet cutting equipment with water only or with abrasive additives. Replaces steel pipe where flexibility is important. Compression forming (hydroforming): A manufacturing procedure applying water pressure to produce complex hollow parts made from pipe-like basic materials. Construction Core tube Pressure reinforcement Cover Color Polyoxymethylene Eight spiral layers of maximum tensile steel wire Polyamide Red Temperature Range - 10ºC up to +70ºC Ordering number DN Operating pressure bar psi Hose lenght (m) Min. bend radius (mm) Hose o/d (mm) Connectors ,6 M14 x 1,5 - M14 x 1, ,6 9/16 UNF - 9/16 UNF ( ¹ ) High pressure hose with extra PVC (yellow) protection. Other hoses/connectors can be delivered on request. All hoses is with left threads. Products and Accessories 40

41 Lance assembly Lance assembly Robot 324 Max 1600 bar (23200 psi) Fig.No Ordering No. Quantity Description Dimensions No.de fig. Rèference Quantitè Dimensions Abb.Nr Bestellnum Anzahl Abmessungen Num.de fignum.pedido Cantidad Dimensiones No. rif. No Cat Quantita Dimensioni Fig. nr Best.nr Antal Dimensioner Lance mm 3/4 M36x Lance mm, 1 5/16-12 UNF OPTION US THREAD Holder Stabilizer Nozzle nut... For nozzles mm OPTION Nozzle nut... For nozzles mm OPTION O-ring XXXX XX 1 Nozzle type A... OPTION, not included XXXX XX 1 High pressure hose... Not included 41 Products and Accessories

42 Lance assembly Lance assembly Robot 365, Max 1600 bar (23200 psi) Fig.No Ordering No. Quantity Description Dimensions No.de fig. Rèference Quantitè Dimensions Abb.Nr Bestellnum Anzahl Abmessungen Num.de fignum.pedido Cantidad Dimensiones No. rif. No Cat Quantita Dimensioni Fig. nr Best.nr Antal Dimensioner Lance... L=620mm, M36x2, 3/4" ID Lance mm, 1 5/16-12 UNF OPTION US THREAD Holder Stabilizer Nozzle nut... For nozzles mm OPTION Nozzle nut... For nozzles mm OPTION O-ring xxxx xx 1 Nozzle... Not included,option type A or M xxxx xx 1 High pressure hose... Not included,3/4,option Products and Accessories 42

43 Lance assembly Lance assembly Robot 324 M24x1,5 Max 1500/2100 bar Fig.No Ordering No. Quantity Description Dimensions No.de fig. Rèference Quantitè Dimensions Abb.Nr Bestellnum Anzahl Abmessungen Num.de fignum.pedido Cantidad Dimensiones No. rif. No Cat Quantita Dimensioni Fig. nr Best.nr Antal Dimensioner Lance... 1/2 540 mm, DN Stabilizer Nozzle holder O-ring XXXX XX 1 Nozzle... Not included Type A, Max 1500 Bar OPTION XXXX XX 1 Nozzle... Not included, Type M, Max 2500 Bar OPTION Nozzle nut mm hole Option Nozzle nut mm hole Option Copper seal Support ring V-block 43 Products and Accessories

44 Lance assembly Lance assembly Robot 365 M24x1,5 Max 1500/2100 bar Fig.No Ordering No. Quantity Description Dimensions No.de fig. Rèference Quantitè Dimensions Abb.Nr Bestellnum Anzahl Abmessungen Num.de fignum.pedido Cantidad Dimensiones No. rif. No Cat Quantita Dimensioni Fig. nr Best.nr Antal Dimensioner Lance... 1/2 620 mm, DN Stabilizer Nozzle holder O-ring XXXX XX 1 Nozzle... Not included Type A, Max 1500 Bar OPTION XXXX XX 1 Nozzle... Not included, Type M, Max 2500 Bar OPTION Nozzle nut mm hole Option Nozzle nut mm hole Option Copper seal Support ring V-block Products and Accessories 44

45 Double lance assembly Robot 365 Double lance assy. Robot 365, Max 1600 bar (23200 psi) Fig.No Ordering No. Quantity Description Dimensions No.de fig. Rèference Quantitè Dimensions Abb.Nr Bestellnum Anzahl Abmessungen Num.de fignum.pedido Cantidad Dimensiones No. rif. No Cat Quantita Dimensioni Fig. nr Best.nr Antal Dimensioner Double lance head Lance... M36x2, L= 500 mm OPTION Lance... M36x2-1 5/6-12 UNF, L= 500 mm OPTION Stabilizer Nozzle holder Seal holder Seal O-ring O-ring 9-2 Nozzle... Type A, Not included Nozzle nut... For nozzles mm OPTION Nozzle nut... For nozzles mm OPTION 45 Products and Accessories

46 Double lance assembly Robot 324 Double lance assy. Robot 324 US/EU,Max 1600 bar(23200 psi) Fig.No Ordering No. Quantity Description Dimensions No.de fig. Rèference Quantitè Dimensions Abb.Nr Bestellnum Anzahl Abmessungen Num.de fignum.pedido Cantidad Dimensiones No. rif. No Cat Quantita Dimensioni Fig. nr Best.nr Antal Dimensioner Double lance head Lance... L= 410 mm EU OPTION Lance... L= 410 mm US Thread 1 5/16-12 UNF OPTION Stabilizer Nozzle holder Seal holder Seal O-ring O-ring 9-2 Nozzle... Type A, Not included Nozzle nut... For nozzles mm OPTION Nozzle nut... For nozzles mm OPTION Products and Accessories 46

47 Double lance assembly Robot 432 Double lance assy. Robot 432 US/EU, Max 1600 bar(23200 psi) Fig.No Ordering No. Quantity Description Dimensions No.de fig. Rèference Quantitè Dimensions Abb.Nr Bestellnum Anzahl Abmessungen Num.de fignum.pedido Cantidad Dimensiones No. rif. No Cat Quantita Dimensioni Fig. nr Best.nr Antal Dimensioner Double lance head Lance... L=620 mm EU OPTION Lance... L=620 mm US Thread 1 5/16-12 UNF OPTION Stabilizer Nozzle holder Seal holder Seal O-ring O-ring 9-2 Nozzle... Type A, Not included Nozzle nut... For nozzles mm OPTION Nozzle nut... For nozzles mm OPTION 47 Products and Accessories

48 Lance complete Lance complete 3000 bar (43500 psi) Fig.No Ordering No. Quantity Description Dimensions No.de fig. Rèference Quantitè Dimensions Abb.Nr Bestellnum Anzahl Abmessungen Num.de fignum.pedido Cantidad Dimensiones No. rif. No Cat Quantita Dimensioni Fig. nr Best.nr Antal Dimensioner Lance... Max 3000 bar Seal lens... For nozzel typ I 3-1 Nozzel typ I... OPTION, not included Nozzle holder Connection... Max 4000 bar Pressure screw... M30x Pressure ring... M14x1,5 LH Pressure screw Pressure ring... M14x1,5 LH Lanceholder Clamp Washer Screw... M6S M10x40 Products and Accessories 48

49 Lance complete Lance complete 2500 bar (36250 psi) Fig.No Ordering No. Quantity Description Dimensions No.de fig. Rèference Quantitè Dimensions Abb.Nr Bestellnum Anzahl Abmessungen Num.de fignum.pedido Cantidad Dimensiones No. rif. No Cat Quantita Dimensioni Fig. nr Best.nr Antal Dimensioner Lance... Max 3000 bar Connection... Max 4000 bar Pressure screw... M30x Pressure ring... M14x1,5 LH Lanceholder... For 750 mm lance Clamp Washer Washer Screw M6S M10x40... Screw M6S M10x Cap nut bar XXX XX 1 Nozzle type M... OPTION, not included Ring Insert Nozzle holder bar 49 Products and Accessories

50 Lance complete Lance complete 1500 bar (21750 psi) Fig.No Ordering No. Quantity Description Dimensions No.de fig. Rèference Quantitè Dimensions Abb.Nr Bestellnum Anzahl Abmessungen Num.de fignum.pedido Cantidad Dimensiones No. rif. No Cat Quantita Dimensioni Fig. nr Best.nr Antal Dimensioner Lance... Max 3000 bar,l=750 mm Connection... Max 2000 bar Pressure screw... M30x Pressure ring... M14x1,5 LH Lanceholder... For 750 mm lance Clamp Washer... Washer Screw... Screw M6S M10x Nozzle nut... For Nozzle A Support ring O-ring XX 1 Nozzle type A... OPTION, not included Nozzle holder... For nozzle A Products and Accessories 50

51 Lances Lance Ordering number Length Connector Max pressure mm bar psi M 36x2 - M 36x M 36x2 - M 36x M 36x2 - M 36x M 36x2 - M 36x M 36x2 - M 36x M 36x2 - M 36x M 36x2 - M 36x M 36x2 - M 36x M 36x2 - M 36x M 36x2-1 5/16-12 UNF M 36x2-1 5/16-12 UNF M 36x2-1 5/16-12 UNF M 36x2-1 5/16-12 UNF M 36x2-1 5/16-12 UNF Products and Accessories

52 Lances Lance Ordering number Length Connector Max pressure mm bar psi M 24x1,5 - M 24x1, M 24x1,5 - M 24x1, M 24x1,5 - M 24x1, M 24x1,5 - M 24x1, M 24x1,5 - M 24x1, M 24x1,5 - M 24x1, M 24x1,5 - M 24x1, M 24x1, UNF M 24x1, UNF M 36x2 - M 36x2 6º M 36x2 - M 36x2 9º M 36x2 - M 36x2 22º M 24x1,5 - M 24x1, M 48x2 - M 48x M 30x2 - M 24x1, Products and Accessories 52

53 Lances Lance Ordering number Length Connector Max pressure mm bar psi M 14 x 1,5 - LH M 14 x 1,5 - LH M 14 x 1,5 - LH M 14 x 1,5 - LH M 14 x 1,5 - LH M 14 x 1,5 - LH M 14x1,5-9/16 UNF /16-18 UNF - LH /16-18 UNF - LH /16-18 UNF - LH /16-18 UNF - LH /16-18 UNF - LH /16-18 UNF - LH Products and Accessories

54 Elbow coupling 65º Elbow coupling between HP Lance and HP Hose Elbow coupling 65º 2100 bar (30450 psi) Fig.No Ordering No. Quantity Description Dimensions No.de fig. Rèference Quantitè Dimensions Abb.Nr Bestellnum Anzahl Abmessungen Num.de fignum.pedido Cantidad Dimensiones No. rif. No Cat Quantita Dimensioni Fig. nr Best.nr Antal Dimensioner Sealing lens Flat gasket Elbow coupling DN12... M24x1,5, 65º O-ring Products and Accessories 54

55 Elbow coupling 65º Elbow coupling between HP Lance and HP Hose Elbow coupling 65º, 1600 bar (23200 psi) Fig.No Ordering No. Quantity Description Dimensions No.de fig. Rèference Quantitè Dimensions Abb.Nr Bestellnum Anzahl Abmessungen Num.de fignum.pedido Cantidad Dimensiones No. rif. No Cat Quantita Dimensioni Fig. nr Best.nr Antal Dimensioner Sealing lens Flat gasket Elbow coupling DN20... M36x2, 65º O-ring 55 Products and Accessories

56 Product info Cone insert for the standard lance that increases jet performance. In order to meet the requirements of higher production, we are proud to present to you a cone insert that will fit into your existing lance. No need to invest in special design lances and nozzles. Install the cone and the production during deep cut will increase. The secret is the increased speed of water over a longer distance. The cone is delivered with a front seal and is ready to be installed as soon as you unwrap it from the box. Tests have shown that the benefit of using the cone in conjunction with smaller pumps. The water jet stays focused for a longer distance why deeper cuts are Cone conducted faster using the cone XXX XX Lance, DN Cone insert Nozze holder Nozzle nut Copper seal XX Conjet nozzle typ A O-ring APPLIED WATERJET TECHNOLOGY Products and Accessories 56

57 Stabilizer Ordering number Description Dimension Stabilizer DN Stabilizer DN Stabilizer DN Stabilizer DN Stabilizer DN Stabilizer DN Products and Accessories

58 Nozzle holder Ordering number Description Connector Max pressure bar psi Nozzle holder M 24x1,5 - M 24x1, Nozzle holder M 24x1,5 - M 36x Nozzle holder M 24x1,5 - M 48x Nozzle holder M 24x1,5 - M 36x Angle nipple 65º M 36x2 - M 36x Angle nipple 30º M 36x2 - M 36x Angle nipple 65º M 24x1,5 - M 24x1, Angle nipple 90º M 36x2 - M 36x Products and Accessories 58

59 Nozzle nut Ordering number Description Connector Max pressure bar psi (1) Nozzle nut type A (1) Nozzle nut type A M 24x1,5 Female M 24x1,5 Female (2) Nozzle nut type M 24x1,5 Female A Nozzle nut G 3/8 Female Nozzle nut type I M 14x1,5-LH Female Nozzle nut type I 9/16-18 UNF-LF Female (1) Nozzle nut with outlet hole of 5.0 mm, for nozzle between 3.0 mm- 4.8 mm (2) Nozzle nut with outlet hole of 3.5 mm, for nozzle between 1.0 mm- 3.0 mm 59 Products and Accessories

60 Wire mesh Ordering number Description Dimension Wire mesh DN Wire mesh Wire mesh DN 12 DN 8 Ordering number Description Red dog nylon Products and Accessories 60

61 Jointing nipple Ordering number Description Connector Max pressure bar psi Jointing nipple M 42x2 - M 42x Jointing nipple M 36x2 - M 36x Jointing nipple M 24x1,5 - M 24x1, Jointing nipple M 22x1,5 - M 22x1, Jointing nipple M 18x1,5 - M 18x1, Jointing nipple M 36x2 - M 24x1, Jointing nipple M 26x2 - M 22x1, Jointing nipple M 24x1,5 - M 22x1, Jointing nipple M 24x1,5 - M 18x1, Jointing nipple M 36x2 - M 24x1, Jointing nipple M 36x2 - M 24x1, Products and Accessories

62 Jointing nipple Ordering number Description Connector Max pressure bar psi Jointing nipple 1 5/16 UNF - 1 5/16 UNF Jointing nipple M 36x2-1 5/16 UNF Jointing nipple M 24x1, UNF Jointing nipple 1-12 UNF UNF Connector M 14x1,5 - M 14x1,5 LH Connector 9/16 UNF - 9/16 UNF Glandnut M26x1, Coller M14x1,5 LH Coller 9/16 LH Products and Accessories 62

63 Tandem block Ordering number Description Connector Max pressure bar psi Tandemblock G1 1/4 (x3) Tandemblock G1 1/4 (x3) Adapter M 36 x2 - G1 1/ Adapter M 24x1,5 - G1 1/ Adapter 1 5/16 12 UNF - G1 1/ Adapter 1 12 UNF - G1 1/ Plug G1 1/ Seal Y-Block compl. M14x1,5 (x3) alt 9/16 UNF (x3) Products and Accessories

64 Nozzle list Type A : Round jet Stainless steel, hardened Conical water bore with countersunk jetting orifice O-ring seal Technical data Operating pressure: max 1500 bar (21750 psi). Efficiency factor Type A: 0.95 Long Short Plug Type Ordering No. Description Type Ordering No Description A Nozzle, Round Jet 0.9 A Nozzle, Round Jet 1.0 mm A Nozzle, Round Jet 1.1 mm A Nozzle, Round Jet 1.2 mm A Nozzle, Round Jet 1.3 mm A Nozzle, Round Jet 1.4 mm A Nozzle, Round Jet 1.5 mm A Nozzle, Round Jet 1.6 mm A Nozzle, Round Jet 1.7 mm A Nozzle, Round Jet 1.8 mm A Nozzle, Round Jet 1.9 mm A Nozzle, Round Jet 2.0 mm A Nozzle, Round Jet 2.1 mm A Nozzle, Round Jet 2.2 mm A Nozzle, Round Jet 2.3 mm A Nozzle, Round Jet 2.4 mm A Nozzle, Round Jet 2.5 mm A Nozzle, Round Jet 2.6 mm A Nozzle, Round Jet 2.7 mm A Nozzle, Round Jet 2.8 mm A Nozzle, Round Jet 2.9 mm A Nozzle, Round Jet 3.0 mm A Nozzle, Round Jet 3.1 mm A Nozzle, Round Jet 3.2 mm A Nozzle, Round Jet 3.3 mm A Nozzle, Round Jet 3.4 mm A Nozzle, Round Jet 3.5 mm A Nozzle, Round Jet 3.6 mm A Nozzle, Round Jet 3.7 mm A Nozzle, Round Jet 3.8 mm A Nozzle, Round Jet 3.9 mm A Nozzle, Round Jet 4.0 mm A Nozzle, Round Jet 4.1 mm A Nozzle, Round Jet 4.2 mm A Nozzle, Round Jet 4.3 mm A Nozzle, Round Jet 4.4 mm A Nozzle, Round Jet 4.5 mm A Nozzle, Round Jet 4.6 mm A Drive nozzle mm, Short A Drive nozzle mm, Short A Drive nozzle mm, Short A Drive nozzle mm, Short A Plug O-ring Reaction force over 150 N Reaction force over 250 N Products and Accessories 64

65 Nozzle list Type B : Fan jet Stainless steel, hardened Conical water bore with countersunk jetting orifice O-ring seal Technical data Operating pressure: max 1500 bar (21750 psi). Efficiency factor Type B: 0.67 Long Short Type Ordering No. Description Dimension Extra B Nozzle, Fan Jet mm - 20º Short B Nozzle, Fan Jet mm - 10º B Nozzle, Fan Jet mm - 15º B Nozzle, Fan Jet mm - 15º B Nozzle, Fan Jet mm - 30º B Nozzle, Fan Jet mm - 10º B Nozzle, Fan Jet mm - 30º B Nozzle, Fan Jet mm - 15º B Nozzle, Fan Jet mm - 15º B Nozzle, Fan Jet mm - 30º B Nozzle, Fan Jet mm - 30º B Nozzle, Fan Jet mm - 30º B Nozzle, Fan Jet mm - 15º B Nozzle, Fan Jet mm - 15º B Nozzle, Fan Jet mm - 15º B Nozzle, Fan Jet mm - 10º B Nozzle, Fan Jet mm - 15º B Nozzle, Fan Jet mm - 15º B Nozzle, Fan Jet mm - 15º B Nozzle, Fan Jet mm - 15º Reaction force over 150 N Reaction force over 250 N 65 Products and Accessories

66 Nozzle list Type C : Round jet Rust and acid resistant stainless steel Conical water bore with countersunk jetting orifice Metal to metal seal Technical data Operating pressure: max 400 bar (5800 psi). Efficiency factor Type C: 0.92 Connection thread: G 1/4 Type Ordering No. Description Type Ordering No Description C 3312 Nozzle, Round Jet 0.3 mm C 3312 Nozzle, Round Jet 0.4 mm C 3312 Nozzle, Round Jet 0.5 mm C 3312 Nozzle, Round Jet 0.6 mm C 3312 Nozzle, Round Jet 0.7 mm C Nozzle, Round Jet 0.8 mm C 3312 Nozzle, Round Jet 0.9 mm C 3312 Nozzle, Round Jet 1.0 mm C Nozzle, Round Jet 1.1 mm C 3312 Nozzle, Round Jet 1.2 mm C 3312 Nozzle, Round Jet 1.3 mm C Nozzle, Round Jet 1.4 mm C 3312 Nozzle, Round Jet 1.5 mm C 3312 Nozzle, Round Jet 1.6 mm C 3312 Nozzle, Round Jet 1.7 mm C 3312 Nozzle, Round Jet 1.8 mm C 3312 Nozzle, Round Jet 1.9 mm C Nozzle, Round Jet 2.0 mm C 3312 Nozzle, Round Jet 2.1 mm C 3312 Nozzle, Round Jet 2.2 mm C Nozzle, Round Jet 2.3 mm C 3312 Nozzle, Round Jet 2.4 mm C Nozzle, Round Jet 2.5 mm C 3312 Nozzle, Round Jet 2.6 mm C 3312 Nozzle, Round Jet 2.7 mm C 3312 Nozzle, Round Jet 2.8 mm C 3312 Nozzle, Round Jet 2.9 mm C 3312 Nozzle, Round Jet 3.0 mm C 3312 Nozzle, Round Jet 3.1 mm C 3312 Nozzle, Round Jet 3.2 mm C 3312 Nozzle, Round Jet 3.3 mm C 3312 Nozzle, Round Jet 3.4 mm C 3312 Nozzle, Round Jet 3.5 mm C 3312 Nozzle, Round Jet 3.6 mm C Nozzle, Round Jet 3.7 mm C 3312 Nozzle, Round Jet 3.8 mm C 3312 Nozzle, Round Jet 3.9 mm C 3312 Nozzle, Round Jet 4.0 mm O-ring Reaction force over 150 N Reaction force over 250 N When working with hand held guns or lances the max. allowable reaction force is 250 N. If the reaction force is over 150 N then the jetting tool must be fitted with a support device such as a shoulder stock. Products and Accessories 66

67 Nozzle list Type D : Fan jet Rust and acid resistant stainless steel Conical water bore with countersunk jetting orifice Nozzle (Fan) angles 20-90º Metal to metal seal Jet pattern adjustable if O-ring fitted Technical data Operating pressure: max 400 bar (5800 psi). Efficiency factor Type D: 0.67 Connection thread: G 1/4 Type Ordering No. Description Type Ordering No Description D 3312 Nozzle, Fan Jet mm D 3312 Nozzle, Fan Jet mm D 3312 Nozzle, Fan Jet mm D 3312 Nozzle, Fan Jet mm D 3312 Nozzle, Fan Jet mm D Nozzle, Fan Jet mm 30 D 3312 Nozzle, Fan Jet mm D 3312 Nozzle, Fan Jet mm D 3312 Nozzle, Fan Jet mm D 3312 Nozzle, Fan Jet mm D 3312 Nozzle, Fan Jet mm D 3312 Nozzle, Fan Jet mm D 3312 Nozzle, Fan Jet mm D 3312 Nozzle, Fan Jet mm D 3312 Nozzle, Fan Jet mm D 3312 Nozzle, Fan Jet mm D Nozzle, Fan Jet mm 30 D 3312 Nozzle, Fan Jet mm D 3312 Nozzle, Fan Jet mm D 3312 Nozzle, Fan Jet mm D 3312 Nozzle, Fan Jet mm D 3312 Nozzle, Fan Jet mm D 3312 Nozzle, Fan Jet mm D 3312 Nozzle, Fan Jet mm D 3312 Nozzle, Fan Jet mm D 3312 Nozzle, Fan Jet mm D 3312 Nozzle, Fan Jet mm D 3312 Nozzle, Fan Jet mm D 3312 Nozzle, Fan Jet mm D 3312 Nozzle, Fan Jet mm D 3312 Nozzle, Fan Jet mm D 3312 Nozzle, Fan Jet mm O-ring Reaction force over 250 N Reaction force over 150 N When working with hand held guns or lances the max. allowable reaction force is 250 N. If the reaction force is over 150 N then the jetting tool must be fitted with a support device such as a shoulder stock. 67 Products and Accessories

68 Nozzle list Type E : Round jet Stainless steel, hardened with conical water bore jetting orifice Metal to metal seal Technical data Operating pressure: max 2500 bar (36250 psi). Efficiency factor Type E: 0.92 Form: 4.5/3.25 x 4 long Type Ordering No. Description Dimension Extra E E E E E E E E E E E E Nozzle, Round Jet mm Nozzle, Round Jet mm Nozzle, Round Jet mm Nozzle, Round Jet mm Nozzle, Round Jet mm Nozzle, Round Jet mm Nozzle, Round Jet mm Nozzle, Round Jet mm Nozzle, Round Jet mm Nozzle, Round Jet mm Nozzle, Round Jet mm Nozzle, Round Jet mm Pressure screw Seal lens Plug Reaction force over 150 N Reaction force over 250 N Products and Accessories 68

69 Nozzle list Type F Operating pressure max 2500 bar (36250 psi). Bore- : mm Efficiency factor Type F: 0.63 Material: Saphire, long lifetime Type G Operating pressure max 2500 bar (36250 psi). Bore- : mm Efficiency factor Type G: 0.92 Material: Stainless steel, highly cohesive jet stream Type H Operating pressure max 2500 bar (36250 psi). Bore- : mm Efficiency factor Type H: 0.75 Material : Saphire, long lifetime, highly cohesive in sharp jet design. Type Ordering No. Description Dimension Pos No. F Nozzle inserts M mm 10 F Nozzle inserts M mm 10 F Nozzle inserts M mm 10 F Nozzle inserts M mm 10 F Nozzle inserts M mm 10 F Nozzle inserts M mm 10 F Nozzle inserts M mm 10 F Nozzle inserts M mm 10 F Nozzle inserts M mm 10 F Nozzle inserts M mm 10 F Nozzle inserts M mm Pressure screw Plug Sealing lens G Nozzle inserts M mm 10 G Nozzle inserts M mm 10 G Nozzle inserts M mm 10 G Nozzle inserts M mm 10 G Nozzle inserts M mm 10 G Nozzle inserts M mm 10 G Nozzle inserts M mm 10 G Nozzle inserts M mm 10 G Nozzle inserts M mm 10 G Nozzle inserts M mm Plug Sealing lens H Nozzle inserts M mm 10 H Nozzle inserts M mm 10 H Nozzle inserts M mm 10 H Nozzle inserts M mm 10 H Nozzle inserts M mm 10 H Nozzle inserts M mm 10 H Nozzle inserts M mm 10 H Nozzle inserts M mm 10 H Nozzle inserts M mm 10 H Nozzle inserts M mm 10 H Nozzle inserts M mm 10 Plug Products and Accessories

70 Nozzle list Products and Accessories 70

71 Nozzle list Type I : Round jet ºOperating pressure: max 3000 bar (43500 psi). ºEfficiency factor Type I: 0.7 º Material: Stainless steel with saphire insert Type Ordering No. Description Dimensions Extra I Nozzle, Round Jet mm I Nozzle, Round Jet mm I Nozzle, Round Jet mm I Nozzle, Round Jet mm I Nozzle, Round Jet mm I Nozzle, Round Jet mm I Nozzle, Round Jet mm I Nozzle, Round Jet mm I Nozzle, Round Jet mm I Nozzle, Round Jet mm I Nozzle, Round Jet mm I Nozzle, Round Jet mm I Nozzle, Round Jet mm I Nozzle, Round Jet mm I Nozzle, Round Jet mm I Nozzle, Round Jet mm I Nozzle, Round Jet mm I Nozzle, Round Jet mm I Nozzle, Round Jet mm Seal lens Efficiency Flow rates nozzle Type I (l/min) factor Operation pressure (bar ) 0, ,4 2,3 2,9 3,3 3,7 3,8 0,5 3,6 4,5 5,2 5,8 6,0 0,6 5,3 6,4 7,4 8,3 8,6 mm0,7 7,1 8,8 10,1 11,3 11,8 0,8 9,3 11,4 13,2 14,8 15,4 0,9 11,6 14,5 16,7 18,7 19,4 1,0 14,2 17,9 20,6 23,1 24,0 1,1 17,5 21,6 25,0 27,9 29,5 1,2 21,0 25,5 29,2 32,5 35,3 1,3 24,8 30,1 31,6 38,3 41,8 mm1,4 29,0 35,2 40,4 44,8 48,8 1,5 33,5 40,7 46,7 51,8 56,3 1,6 38,4 46,6 53,5 59,4 64,6 1,7 43,3 52,7 60,4 67,0 72,9 1,8 48,6 59,1 67,7 75,1 81,8 Reaction force over 250 N Reaction force over 150 N When working with hand held guns or lances the the max.allowable reaction force is 250 N, If the reaction force is over 150 N then the jetting tool must be fitted with a support device such as a shoulder stock. 71 Products and Accessories

72 Nozzle list Type K : Round jet ºStainless steel, with Saphire-insert ºWith conical water bore º Metal to metal seal Technical data Operating pressure: max 2500 bar (36250 psi). Efficiency factor Type K: 0.75 Type Ordering No. Description Dimension Extra K Nozzle, Round Jet mm K Nozzle, Round Jet mm K Nozzle, Round Jet mm K Nozzle, Round Jet mm K Nozzle, Round Jet mm K Nozzle, Round Jet mm K Nozzle, Round Jet mm K Nozzle, Round Jet mm K Nozzle, Round Jet mm K Nozzle, Round Jet mm K Nozzle, Round Jet mm K Nozzle, Round Jet mm K Nozzle, Round Jet mm K Nozzle, Round Jet mm Reaction force over 150 N Reaction force over 250 N Products and Accessories 72

73 Nozzle list Type L : Round jet Stainless steel, hardened Conical water bore with countersunk jetting orifice Metal to metal seal Technical data Operating pressure: max 1200 bar (17400 psi). Efficiency factor Type L: 0.95 Type Ordering No. Description Dimension Extra L Nozzle, Round Jet mm L Nozzle, Round Jet mm L Nozzle, Round Jet mm L Nozzle, Round Jet mm L Nozzle, Round Jet mm L Nozzle, Round Jet mm L Nozzle, Round Jet mm L Nozzle, Round Jet mm L Nozzle, Round Jet mm L Nozzle, Round Jet mm L Nozzle, Round Jet mm L Nozzle, Round Jet mm L Nozzle, Round Jet mm L Nozzle, Round Jet mm L Nozzle, Round Jet mm L Nozzle, Round Jet mm L Nozzle, Round Jet mm L Nozzle, Round Jet mm L Nozzle, Round Jet mm L Nozzle, Round Jet mm L Nozzle, Round Jet mm L Nozzle, Round Jet mm L Nozzle, Round Jet mm L Nozzle, Round Jet mm L Nozzle, Round Jet mm L Nozzle, Round Jet mm L Nozzle, Round Jet mm L Nozzle, Round Jet mm 73 Products and Accessories

74 Nozzle list Type M : Round jet Made of stainless steel with ceramic insert Conical water bore with countersunk jetting orifice O-ring seal Technical data Operating pressure: max 2500 bar (36250 psi). Efficiency factor Type M: 0.95 Type Ordering No. Description Dimension Extra M Nozzle, Round Jet mm M Nozzle, Round Jet mm M Nozzle, Round Jet mm M Nozzle, Round Jet mm M Nozzle, Round Jet mm M Nozzle, Round Jet mm M Nozzle, Round Jet mm M Nozzle, Round Jet mm M Nozzle, Round Jet mm M Nozzle, Round Jet mm M Nozzle, Round Jet mm M Nozzle, Round Jet mm M Nozzle, Round Jet mm M Nozzle, Round Jet mm M Nozzle, Round Jet mm M Nozzle, Round Jet mm O-ring Retaining ring Plug Products and Accessories 74

75 Nozzle list Type N : Nozzle inserts M4 Stainless steel with Saphire-insert Metal to metal seal Technical data Operating pressure: max 2500 bar (36250 psi). Efficiency factor Type N: 0.63 Form : M4 x4 long Type Ordering No. Description Dimension Extra N Nozzle, Round jet mm N Nozzle, Round jet mm N Nozzle, Round jet mm N Nozzle, Round jet mm N Nozzle, Round jet mm N Nozzle, Round jet mm N Nozzle, Round jet mm N Nozzle, Round jet mm N Nozzle, Round jet mm N Nozzle, Round jet mm N Nozzle, Round jet mm N Nozzle, Round jet mm N Sealing lens N Plug Reaction force over 150 N 75 Products and Accessories

76 Nozzle list Type P : Nozzle inserts M10 Stainless steel with Saphire-insert with coinical water bore Metal to metal seal Technical data Operating pressure: max 3000 bar (43500 psi). Efficiency factor : 0.70 Type Ordering No. Description Dimension Extra P Nozzle, Round jet mm P Nozzle, Round jet mm P Nozzle, Round jet mm P Nozzle, Round jet mm P Nozzle, Round jet mm P Nozzle, Round jet mm P Nozzle, Round jet mm P Nozzle, Round jet mm P Nozzle, Round jet mm P Nozzle, Round jet mm P Nozzle, Round jet mm P Nozzle, Round jet mm P Nozzle, Round jet mm P Nozzle, Round jet mm P Nozzle, Round jet mm P Nozzle, Round jet mm P Plug Products and Accessories 76

77 Nozzle list Type T : Nozzle inserts M10 Stainless steel with diamond insert with coinical water bore Metal to metal seal interchangeble with type P M 10 thread with anti seize coating Technical data Operating pressure: max 3500 bar (50750 psi). Efficiency factor : 0.92 ( ) Efficiency factor : 0.70 ( ) Type Ordering No. Description Dimension Extra T 3312 Nozzle, Round jet mm T 3312 Nozzle, Round jet mm T 3312 Nozzle, Round jet mm T 3312 Nozzle, Round jet mm T 3312 Nozzle, Round jet mm T 3312 Nozzle, Round jet mm T 3312 Nozzle, Round jet mm T 3312 Nozzle, Round jet mm T 3312 Nozzle, Round jet mm T 3312 Nozzle, Round jet mm T 3312 Nozzle, Round jet mm T 3312 Nozzle, Round jet mm T 3312 Nozzle, Round jet mm T Plug 77 Products and Accessories

78 Blank page Products and Accessories 78

79 Protective products Products & Accessories

80 Protective products Top comfort High flexilility New certification TROUSES The trousers are fitted with front protection up to the waist. The zips on the outsideofthe legs are protected by a sealing Velcro flap. With adjusable braces with stretch in the back. Elastic part in the rear waist and adjustable band in the sides for maximum comfort and perfect fit. Trousers are very popular among workers who move a lot, climb or crawl. Preferably used in combination with Waistcoat or Jacket, Hand Protections, Gaiters or Boots Weight 2.4 kg (Trousers 20/30, L/XL). Size S/M, L/XL, 2XL/3XL Comfort details in the back. Waist addjustment for perfect fit. Protected areas striped Front 5000 Back 5000 Product Single/Rotor Size Art. no Model No. Trousers 10/28 S/M-2XL/3XL Trousers 20/30 S/M-2XL/3XL Products & Accessories 80

81 JACKET WITH HAND PROTECTION The Jacket provides effective full front protection as well as around the neck and shoulders. It also has integrated Hand Protection. Ideally combined with Trousers and Gaiters or Boots 3000 for maximum protection. Weight 2.4 kg (Jacket 20/30 Model 5080, L/XL). Size S/M, L/XL, 2XL/3XL. Protective products Protected areas striped Front 5080 Back 5080 Product Single/Rotor Size Art. no Model No. Jacket 10/28 M/2XL,3XL Jacket 20/30 M/2XL,3XL WAISTCOAT The waistcoat offers effective protection and optimal comfort. Various sizes possible by using the Velcro fasteners at the waist and back. The Waistcoat is often used in combination with Hand Protection, Trousers, Overall and Gaiters or Boots Weight 1.2 kg (Waistcoat 20/30 Model 5000, M/2XL). Size M/2XL, 3XL. Protected areas striped Front 5000 Back 5000 Product Single/Rotor Size Art. no Model No. Waitcoat 10/28 M/2XL,3XL Waitcoat 20/30 M/2XL,3XL Products & Accessories

82 Protective products OVERALL WITH HAND PROTECTION Protection agains UHP on the front of the legs, the forearms and on the integrated Hand Protection. The neoprene collar seals well against the neck while maintaining freedom of movement. An overall is always in place, no matter if operator is climbing on latters or working in narrow spaces. Ideally combined with Waistcoat for upper body protection, Gaiters or Boots 3000 for foot protection and Balaclava for better comfort. The overall can also be suited with Ventilation. Weight 3.3 kg (Overall 20/30 Model 5080, XL). Art. No Optional Ventilation Size S, M, L, XL, 2XL, 3XL Protected areas striped Front 5080 Back 5080 Product Single/Rotor Size Art. no Model No. Overall 10/28 S-3XL Overall 20/30 S-3XL Products & Accessories 82

83 Protective products WAISTCOAT/APRON A thoughtful combination between Waistcoat and Apron giving superior freedom of movement and comfort, but still offering effective protection for the whole front of the body. The construction with a Waistcoat on top helps spreading the weight of the protective garment. The height of the Apron can be adjusted and the size of the Waistcoat can be adjusted with velcros - this means that it can be used by different operators or for different purposes. Hand Protections and Gaiters or Boots 3000 are suitable complements for extended protection. Weight 3.3 kg(waistcoat with Apron 20/30). One size Products for all environments Protected areas striped Front 5000 Back 5000 Product Single/Rotor Size Art. no Model No. Waistcoat/Apron 10/28 One size Waistcoat/Apron 20/30 One size Products & Accessories

84 Protective products APRONS The full area of the apron has built-in protection. The position of the Apron can be changed through the adjustable neckband. There is also an adjustable band in the waist, which is important comfort details as it takes weight off the neck. Very simple to put on and take off. Recommended for work on flat surfaces and is often used in combination with Hand Protections and Gaiters or Boots The Apron comes in one size.weight 1.5 kg (Apron 20/30). One size Protected areas striped Front 5000 Product Single/Rotor Size Art. no Model No. Apron 10/28 One size Apron 20/30 One size Products & Accessories 84

85 Protective products HAND PROTECTION The Hand protection protects the hand and the forearm. The entire area is protected.easy to put on and a thumb strap keeps it in place. Often used in combination with Waistcoat or Apron. (Hand Protection is integrated in the Overall and the Jacket.) Specific right and left hand designs. Weight 0.3 kg (Hand Protection 20/30). One size Protected areas striped Front 5001 Back 5001 Product Single/Rotor L/R Art. no Model No. Hand Protec. 10/28 Left Hand Protec. 10/28 Right Hand Protec. 20/30 Left Hand Protec. 20/30 Right Products & Accessories

86 Protective products BOOT 3000 Boot 3000 withstands everything within UHP on account of its fixed aluminium gaiters. The gaiters are moulded and jointed, which gives both excellent comfort and mobility. The boot conforms to the requirements set out in BGR 191 and EN A5 S5. Weight 1.9 kg each (Boot 3000 size 43). Size Product Level Size Art. no Model No. Boots 30/ Pressure Flow Nozzle Distance Speed Energy Bar Psi (l/min) (mm) (m/s) (N) ,0 Singel (1) 75 0, ,0 Monro Jet (0,8) 75 0, ,0 Rotor (3x0,5) 75 0, ,2 Single (0,8) 75 0,2 207 BALACLAVA The balaclava, which is made of neoprene is designed to keep the body dry. The breast lap is made of Cordura fitted with adjustable straps to hold it in place. The Balaclava offers no protection againstuhp. Can ideally be used together with the overall. One size GAITERS The gaiters are intentded to be worn outside of the user s regular protective boots. Three clips and velcro in the rear, and an adjustable strap undeer the sole, ensure thet the Gaiters stay in place. The entire area is protected. Very comfortable and light Sold in pairs. Weight 1.0 kg (Gaiters 20/30). One size. Product Size Art. no Model No. Balaclava One size Single/Rotor Size Art. no Model No. 10/28 One size /30 One size Products & Accessories 86

87 Protective products PROTECTIVE BREATHABLE SUIT Protective suit for wet and dry conditions. The overall is designed to meet tough industrial demands concerning function and safety. The suit is of polyamide with a polyurethane coating. Taped seams. 2 chest pockets, 1 leg pocket. Braces for increased comfort. The material breathes, but does not protect against UHP. Weight 1.1 kg Product Size Art. no Model No. Protective Overall S-XXXL TST SPECIAL GREASE REMOVER Mix the TST Grease Remover 1:10 with warm water 40ºC. Apply to the dirty garment surfaces with a brush. Leave for about 20 minutes. If the garments are extremely dirty, use the brush together with lukewarm water on the dirty areas. Rinse with lukewarm water. Let the garment dry in a drying room and reach a temperature of max 60 ºC (to reactivate the water and grease protection). DO NOT TUMBLE DRY. Nonionic surfactants >30% Solubilising agents (alkane diol) Greying inhibitors <5% PH 7.3 Avoid contact with skin and eyes Product temperature of less than 15º C may impair proper function Do not store below 15º C Product Size Art. no Model No. Grease Remover 0,5 litre Products & Accessories

88 Protective products The ideal complement for good protection HOSE PROTECTION Hoses break and couplings break, often very close to the operator and at sensitive areas of the body, such as the abdomen, the arm pit or the neck. These areas are difficult to protect properly. To further improve the safety of the operator, it is recommended to use a Hose Protection.The hose protection is placed on the hose at the connection to the pistol. Closest to the pistol, where the hoses is most likely to break, there is a 250 mm solid steel collar. This provides effective protection for the operator as it has been tested for 3000 bar (43500 psi) An adjustable strap holds the Hose Protection to the pistol.the Hose Protection is very smooth and flexible. Available in 3 lenghts: 750,1400, 1800 mm, and 3 diameters 36, 47 (swivel) and 59 mm. Weight 2.3 kg (Hose Protection diameter 59 mm, lenght 1400 mm). Hose Protection Lenght Art. No. Model No. D=36 mm 750 mm D=36 mm 1400 mm D=36 mm 1800 mm D=47 mm (svivel) 1400 mm D=59 mm 750 mm D=59 mm 1400 mm D=59 mm 1800 mm Products & Accessories 88

89 Protective products Selected combinations with attractive pricing 1) Sigma Complete kit Offering very good protection. All you need to be protected and dry. Ventilation is an option. The Sigma Kit includes: Waistcoat and Overall with integrated Hand Protection. Size S, M, L, XL, 2XL, 3XL 2) Delta Complete kit Offering very good protection and excellent comfort. The Delta Kit includes: Waistcoat, Trousers and Hand Protection. Size S, M, L, XL, 2XL, 3XL Single/Rotor Size Art. no Sigma 10/28 S-3XL /30 S-3XL ) Gamma Complete kit Provides comprehensive protection and high comfort. The Gamma Kit includes: Trousers and Jacket with integrated Hand Protection. Size S, M, L, XL, 2XL, 3XL Single/Rotor Size Art. no Delta 10/28 S-3XL /30 S-3XL Single/Rotor Size Art. no Gamma 10/28 S-3XL /30 S-3XL Products & Accessories

90 CONJET AB P.O. BOX 507 SE HANINGE SWEDEN PHONE +46 (0) FAX +46 (0) WEBSITE