Group 2 Thermo-plastic Hoses Teflon Hoses Water Jetting Hoses

Transcription

1 Group Thermo-plastic Hoses Teflon Hoses Water Jetting Hoses

2 IND Page Contents 3-6 Selection Tables for Hoses and Fittings 7 Micro Hoses, 00N, Mini Control System 8 Teflon Hoses (PTFE), 030T, 033T 9 High Pressure, Type 50N, 57, Low volume Expansion 10 High Pressure, Type 0N, 040N, Light weight 11 High Pressure, Type 44N, 45N, 370N/H, Hydraulic, Gases 1 High Pressure, 714, Type 715 Spray Paint, Hydraulic 13 Ultra high Pressure Type 380N, 380M, Hydraulic, Methanol 14 Ultra high Pressure, Type 388N, X80N, 390N (V91) Hydraulic 15 Ultra high Pressure, Type 448N (V91) Umbilical Hose, 440D/N, Hydraulic 16 Ultra high Pressure, 640D/N, Hydraulic 17 Black Eagle Family + Colorgard TM 18 Water Jetting, Type 40D, 388N Blueline 19 Water Jetting, Type 440D/N, 0N Blueline 0 Water Jetting, Type 640D/N, 740D 1 Water Jetting, Type 840D -6 Chemical table Symbol Key 388N-04V1W 6.3 1/ BS Part No Inside Diameter Out. Dia. Working Pressure Burst Pressure B. adius Weight -

3 SELECTION OF HOSES Hose Part Number Build Design Variation V30 Hose Type (reinforcement) 440 Core Tube and I.D. N N-16V einforcement. reinforcement II (if rein-forcement 0). reinforcement II (if rein-forcement =0) 3. einforcement III 0 = No spiralizing hhh 0 = No braiding 0 = No braiding 1 = Two open spiralized layers 1 = Synthetic fiber (not aramid) 1 = One braid of non-aramid fiber 1 = One braid of non-aramid fiber = Two closed spiralized layers = Aramid fiber = One braid of aramid fiber = One braid of aramid fiber 3 = Two closed spiralized layers two open spiralized layers 3 = Stainless steel wire 3 = One braid of stainless steel wire 3 = One braid of stainless steel wire 4 = Four closed spiralized layers 4 = Steel wire 4 = One braid of steel wire 4 = One braid of steel wire 5 = Four closed spiralized layers (increased pressure) 5 = Iron wire 5 = One braid of iron wire 5 = One braid of iron wire 6 = Six closed spiralized layers 6 = Cord strand 6 = One braid of iron wire, zinc-plated 7 = Six closed spiralized layers (increased pressure) 7 = Steel wire and open spiralized synthetic yarn 8 = Eight closed spiralized layers 8 = Steel wire and open spiralized cord strand 9 = Eight closed spiralized layers (increased pressure) 9 = Other construction 6 = One braid of iron wire, zinc-plated 7 = (open) 8 = Different pressure reinforcement N-16 N-16 V30 V30 4. Core Material 5. Hose Size (I.D.) 6. Cover Material 7. Cover Color D = POM (Delrin) 0 = 1/8" (3.mm) 0 = Polyurethane (PU) 0 = Black E = Ethylene tetrafluoroethylene (ETFE) 05 = 5/3" (4.0mm) 1 = Polyurethane (PU) - seawater-resistant Ethylene chlorotrifluoroeth-ylene (ECTFE) 03 = 3/16" (4.8mm) = PEE = Blue F = Fluorinated ethylene propyl-ene (FEP) 04 = 1/4" (6.4mm) 3 = Polyamide (PA) - Nylon (6, 11, or 1) H = Thermoplastic Elastomer-Ether-Ester Hytrel * 05 = 5/16" (7.9mm) 3 = Polyamide (PA) - Nylon (6, 11, or 1) = Black (metha-nolwashed hose types) 3 = Green 4 = ed M = Mixture/co-extruded 06 = 3/8" (6.4mm) 4 = Polyethylene (PE) 5 = Orange N = Polyamide (Nylon) 08 = 1/" (1.7mm) 8 = Extra thick 6 = Yellow P = Polyethylene (PE) 1 = 3/4" (19.0mm) 7 = Gray S = Special material 16 = 1" (5.4mm) 8 = Gold T = Polytetrafluoroethylene (PTFE) U = Thermoplastic polyure-thanes (TPU) 0 = 1-1/4" (31.8mm) 4 = 1-1/" (38.1mm) V = Polyvinylidene Fluoride (PVDF) 3 = " (50.8mm) 48 = 3" (76.0mm)

4 SELECTION OF HOSES Selection Table for Hoses Hose Dimension inch 5/64 1/8 5/3 3/16 1/4 5/16 3/8 1/ 5/8 3/4 1 1¼ 1½ 3 mm dash DN Micro Hoses Working Pressure Bar Fittings Series 00N Teflon Hoses PTFE/FEP 030T B 033T High pressure Hoses 50N / //H 0N - V91 5K N / 44N / 45N N/H X/9X 390NV X Ultra high pressure Hoses 0N - V91 10K /3X/ 380N / 380M / 388N 800 X80N / 390NV91-10K 71 9X 440D N NV NV / * 640D/640N Black Eagle 40N - V TX 440N/48N - V /BL/SX 0N - V BL/SX 640N/48N - V CX/SX 448M - V BL/SX 0M - V BL 640M - V SX Paint Spray Hoses X Water Jetting Hoses 40D TX/AX 388N BS 440D/440N N BL 640D/640N HX/ 740D HX 840D WX - 4 * Ask us about fittings

5 SELECTION OF FITTINGS Selection Table for Fittings 9X NPTF Male 60 Cone 01 X X X X X X X X X NPTF Female-rigid 0 X JIC Male-37 Cone 03 X X X X UNF Male/O-ring 05 X X X JIC-37 Cone 06 X X X X X X X X X Metric Swivel Strong Series 90 Elbow O-ring 1C X X X JIC 37 Cone 45 Elbow 37 X X X JIC 37 Cone 90 Elbow 39 X X X X X BSP Male-60 Cone 3B X BSP Swivel 60 Cone 9 X X X X X X X X UNF Swivel 59 Cone AY X BSP Swivel 45 Elbow B1 X X X X X BSP Swivel 90 Elbow B X X X X X Metric Swivel Light Series Cone C3 X X X X X X X Metric Swivel Light Series Cone 45 Elbow C4 X X X X Metric Swivel Light Series Cone 90 Elbow C5 X X X X Metric Swivel Strong Series C6 X X X X Metric Swivel Strong Series O-ring C9 X X X X X X Metric Swivel Light Series O-ring CA X X X X X Metric Swivel Light Series 45 Elbow O-ring CE X X X X Metric Swivel Light Series 90 Elbow O-ring CF X X X X Metric Male 4 Cone Light Series D0 X X X X X X Metric Male 4 Cone Strong Series D X X X X X BSP Male D9 X X X X X X X M16X Swivel (Knurled nut) 8 X BSP Swivel 60 Cone UO X X X BSP Male- For USIT ing Y9 AE Fitting High Pressure 59 Cone UNF-LH YA X Metric Swivel Nut Y X AE Fitting Medium Pressure 59 Cone UNF-LH Y X AE Fitting High Pressure 59 Cone UNF-LH Y4 AE Fitting High Pressure 59`Metric cone YM X 01 NPTF Male - 60 Cone 0 NPTF Female - rigid 03 JIC Male - 37 Cone 05 UNF Male / O-ing BL BS X X X X 06 JIC - 37 Cone 37 JIC - 37 Cone 39 JIC - 37 Cone 3B BSP Male - 60 Cone UNF Swivel Nut 9X AX X 45 Elbow UNF Swivel Nut X 90 Elbow UNF Swivel Nut X X 9 Sealing Head (60 ) BSP Swivel Nut BL 9X BS KX X AY 59 Sealing Cone UNF Swivel Nut 69 HX KX X 113 B1 Sealing Head (60 ) BSP Swivel Nut 45 Elbow X B Sealing Head (60 ) BSP Swivel Nut 90 Elbow X C3 Sealing Head Light Series Metric Swivel Nut X C4 Sealing Head 45 Elbow Light Series Metric Swivel Nut X C5 Sealing Head 90 Elbow Light Series Metric Swivel Nut X C6 Sealing Head Heavy Series Metric Swivel Nut X - 5

6 SELECTION OF FITTINGS Selection Table for Fittings X AX TX KX BS BL HX WX NPTF Male 60 Cone 01 X X X X X X X NPTF Female-rigid 0 JIC Male-37 Cone 03 X X X UNF Male/O-ring 05 JIC-37 Cone 06 X X X X X X Metric Swivel Strong Series 90 Elbow O-ring 1C X X X JIC 37 Cone 45 Elbow 37 X X JIC 37 Cone 90 Elbow 39 X X BSP Male-60 Cone 3B X X X X BSP Swivel 60 Cone 9 X X X X X X X X X UNF Swivel 59 Cone AY X X X BSP Swivel 45 Elbow B1 X X X BSP Swivel 90 Elbow B X X X Metric Swivel Light Series Cone C3 X X X X Metric Swivel Light Series Cone 45 Elbow C4 Metric Swivel Light Series Cone 90 Elbow C5 Metric Swivel Strong Series C6 X X Metric Swivel Strong Series O-ring C9 X X X X X X X X X X Metric Swivel Light Series O-ring CA X X Metric Swivel Light Series 45 Elbow O-ring CE X Metric Swivel Light Series 90 Elbow O-ring CF X Metric Male 4 Cone Light Series D0 X X Metric Male 4 Cone Strong Series D X X X BSP Male D9 X X X X M16X Swivel (Knurled nut) 8 BSP Swivel 60 Cone UO X X X X X BSP Male- For USIT ing Y9 X AE Fitting High Pressure 59 Cone UNF-LH YA X Metric Swivel Nut Y AE Fitting Medium Pressure 59 Cone UNF-LH Y AE Fitting High Pressure 59 Cone UNF-LH Y4 X X AE Fitting High Pressure 59`Metric cone YM X X X C9 4 Sealing Cone / O-ing Heavy Series Metric Swivel Nut ISO 11-9X BL AX BS X HX CA 4 Sealing Cone / O-ing Light Series Metric Swivel Nut ISO 11- X CE 4 Sealing Cone / O-ing 45 Elbow Light Series Metric Swivel Nut ISO 11- X CF 4 Sealing Cone / O-ing 90 Elbow Light Series Metric Swivel Nut ISO 11- X D0 Light Series ISO 11- Metric Male 4 Cone X D Heavy Series ISO 11- Metric Male 4 Cone X D9 DIN 385 Shape A BSP Male X 8 Quick Connect Fitting Metric Swivel Nut Knurled X U0 BSP Swivel Nut Sealing Head (60 ) X Y9 BSP Male - for USIT ing X YA High Pressure Connector 59 Cone UNF - Left Hand Thread X Y Quick Connect Fitting Metric Swivel Nut X Y Medium Pressure Connector 59 Cone UNF - Left Hand Thread X Y4 High Pressure Connector 59 Cone UNF - Left Hand Thread X HX WX YM High Pressure Connector 59 Metric Cone Metric - Left Hand Thread X HX WX - 6

7 THEMOPLASTIC HOSES MICO HOSES Type 00N Mini Control System High pressure hose for use with petroleum and synthetic hydraulic oils and gases. Special hose for Mini Control pressure measurement equipment (minimess). Supplied with fittings as specified on the next page. Max length change is +% / -4% at working pressure. * Safety factor reduced for diagnostic applications. CONSTUCTION: Covering: Black Polyamide einforcement: 1 layer braided synthetic fiber Polyamide TEMPEATUE ANGE: 40 o C to +100 o C for synthetic and oil-based hydraulic oils 00N / N-0V / Mini control system HOSE COUPLINGS FO USE WITH HOSE type 00N M16X SCEW LOCK COUPLING Part No A mm d mm d1 mm P.max bar M16x 640 COUPLING WITH PIPE SOCKET M14x1, M16x1,5 640 Part No of the couplings are complete with pressure sleeve, and includes sleeve with dust plug M16x screw lock couplings. PESSUE GAUGE COUPLING /4 BSP / BSP 640 OTHE SIZES, THEAD TYPES AND MATEIALS AVAILLE ON EQUEST - 7

8 THEMOPLASTIC HOSES PTFE TEFLON HOSES Type 030T PTFE Teflon Hose There are currently no known solvents for PTFE. Can be used for steam, acids, alkalis, articles of food, oils and corroding oils and corroding substances. PTFE is highly resistant to natural degradation and aging and does not absorb water. The exceptional low friction resistance minimizes loss of pressure in the hoses. Type 030T is well suited for spray painting. CONSTUCTION: Covering: Stainless steel wire braid (reinforcement) einforcement: 1 layer stainless steel wire braiding Polytetrafluoroethylene PTFE) TEMPEATUE ANGE: 50 o C to +150 o C (+30 o C up to 0 bar) 030T-03V / B 030T-04V / B 030T-05V / B 030T-06V / B 030T-08V / B 030T-10V / B 030T-1V / B 030T-16V B Type 033T PTFE Teflon Hose There are currently no known solvents for PTFE. Can be used for steam, acids, alkalis, articles of food, oils and corroding oils and corroding substances. PTFE is highly resistant to natural degradation and aging and does not absorb water. The exceptional low friction resistance minimizes loss of pressure in the hoses. Type 030T is well suited for spray painting. CONSTUCTION: Covering: Stainless steel wire braid (reinforcement) einforcement: layers stainless steel wire braiding Polytetrafluoroethylene PTFE) TEMPEATUE ANGE: 50 o C to +150 o C (+30 o C up to 0 bar) 033T-04V / T-05V / T-06V / T-08V / T-10V / T-1V / T-16V

9 THEMOPLASTIC HOSES HIGH PESSUE Type 50N Standard Specifications Exceed SAE High pressure hose for use with oil-based and synthetic hydraulic oils, as well as gases. Low volumetric expansion and small outer diameter due to aramid fiber reinforcement. Also available as dual- or multi-hose. Max length change is +/- % at working pressure. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. CONSTUCTION: Covering: einforcement: Black pin-pricked Polyurethane 1 layer braided synthetic aramid fiber Polyamide TEMPEATUE ANGE: 40 o C to +100 o C for synthetic and oil-based hydraulic oils Note: For Non-conductive use N. 50N / / 50N / / 50N / / 50N / / 50N / / Type 57 High Pressure Low Volumetric Expansion High pressure hose for use with oil-based and synthetic hydraulic oils. Especially designed for applications where low volumetric expansion and stable pressure is required. Max length change is +/- % at working pressure. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. CONSTUCTION: Covering: einforcement: Black special Polyurethane 1 or layers braided synthetic aramid fiber Polyamide TEMPEATUE ANGE: 40 o C to +100 o C for synthetic and oil-based hydraulic oils max. 70 o C for water or methanolbased fluids / / / / / / / / / H H - 9

10 THEMOPLASTIC HOSES HIGH PESSUE Type 0N Light weight control devices Flexible and lightweight with excellent pressure capabilities.. Smooth bore for improved flow rate and low pressure drop. ISO Specification for Subsea Production Control Umbilicals.. Used for long-length hose and hose umbilicals requiring lightweight construction, offshore pressure control devices, high pressure tools, hydraulics, pneumatics and lubricating oils. CONSTUCTION: Covering: einforcement: Black Polyamid layers braided synthetic fibers Polyamide TEMPEATUE ANGE: 40 o C to +100 o C for synthetic- and oil-based hydraulic oils Part No mm inch dash mm bar psi bar psi mm kg/m 0N-04V91-5K 6,4 1/4-6 1, ,1 * 0N-04V91-10K 6,4 1/4-6 13, ,14 0N-06V91-5K 9,5 3/ , ,15 * 0N-06V91-10K 9,5 3/ , ,4 3X 0N-08V91-5K 1,7 1/ -1 0, ,17 * 0N-08V91-10K 1,7 1/ -1 3, ,34 Fitting Series Type 040N Multi-use Hose DIN 0 0 Part 1 High pressure hose for hydraulic systems with petroleum, synthetic or water based hydraulic oils. Also ideal for grease, gases and paint spraying. Max length change is +/- % at working pressure. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. Available in other colors CONSTUCTION: Covering: einforcement: Black Polyurethane 1 layer steel wire braiding Polyamide TEMPEATUE ANGE: 40 o C to +100 o C for synthetic- and oil-based hydraulic oils 040N-0V / N-03V / / 040N-04V / / 040N-05V / / 040N-06V / / 040N-08V / / 040N-10V / N-1V / N-16V

11 THEMOPLASTIC HOSES HIGH PESSUE Type 44N/45N SAE 100 9/10 High pressure hydraulic systems for petroleum- and syntheticbased hydraulic oils, spray painting, gases and aggressive media. Ideal for hydraulic and rescue tools. 3/4 and 1 hoses are DNV type-approved. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. CONSTUCTION: Covering: Black Polyurethane (Polyurethane from 5/8 ) einforcement: layers steel wire spiral and 1 layer steel wire braiding Polyamide TEMPEATUE ANGE: 40 o C to +100 o C for oil-based hydraulic oils (to +15 o C for shorter periods) 44N-06V / N-08V / N-0V / N-04V / N-05V / N-06V / N-08V / N-10V / N-1V / N-16V Type 370N/H Universal DIN 0 0 Part High pressure hydraulic systems for petroleum- and syntheticbased hydraulic oils and gases and aggressive media. Ideal for hydraulic and rescue tools. For CNG use, the hose is only sold pre-assembled with fittings including kink guards. Also available as dual- or multi-hose. Max length change is +/- % at working pressure. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. CONSTUCTION: Covering: einforcement: Internal H: Internal N: Black Polyurethane layers steel wire spiral and layers braided synthetic fiber Polyester Elastomer Polyamide TEMPEATUE ANGE: 40 o C to +100 o C for oil-based hydraulic oils (to +10 o C for shorter periods). V91 has PA11 inside. For paint spraying, use fittings series 370N-04V / X 370N-05V / X 370N-06V / X 370N-08V / X 370N-06V / X 370H-08V / X - 11

12 THEMOPLASTIC HOSES HIGH PESSUE Type 714 Spray Paint Hose Type 714 is a special hose for high pressure spray paint designed to meet the market demands. The steel wire braiding makes the hose 100% electrically conductive. Inner tube specially designed for chlorinated solvents. The polyurethane covering provides excellent flexibility and durability. Also excellent for use as a hydraulic hose. CONSTUCTION: Covering: einforcement: Blue Polyurethane 1 layer steel wire braiding Polyamide TEMPEATUE ANGE: 40 o C to +100 o C for synthetic- and oil-based hydraulic oils Part No mm inch DN mm bar psi bar psi mm kg/m Fitting Series /16 DN /4 DN /16 DN /8 DN / DN /8 DN /4 DN DN Type 715 Spray Paint Hose Type 715 is a special hose for high pressure spray paint designed to meet the market demands. The steel wire braiding makes the hose 100% electrically conductive. Inner tube specially designed for chlorinated solvents. The polyurethane covering provides excellent flexibility and durability. Also excellent for use as a hydraulic hose. CONSTUCTION: Covering: einforcement: Blue Polyurethane layers steel wire braiding Polyamide TEMPEATUE ANGE: 40 o C to +100 o C for synthetic- and oil-based hydraulic oils /4 DN X /16 DN X /8 DN X / DN X /8 DN X /4 DN X DN X - 1

13 THEMOPLASTIC HOSES ULTA HIGH PESSUE - CHEMJEC Type 380N Exceed SAE 10 High pressure hydraulic systems for petroleum- and syntheticbased hydraulic oils. Ideal for hydraulic and rescue tools. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. CONSTUCTION: Covering: Black Polyurethane (other colors on request) einforcement: layers steel wire spiral and layers steel wire braid Polyamide. V91 has methanol-washed PA11 TEMPEATUE ANGE: 40 o C to +100 o C for oil-based hydraulic oils, V91 also for methanol-based fluids 380N-04V / N-04V / / 380N-05V / N-06V / N-08V / Also available in twin design Type 380M Exceed ISO Withstands high pressure cycles with no signs of stress cracking. Proven to handle methanol. High collapse resistance (HC) and also providing longer service life. Extremely low permeability. High pressure, high temperature, low volumetric expansion hose. Long length subsea umbilical hose. Excellent chemical resistance. Available in long continuos length up to 3,000 m. CONSTUCTION: Covering: Black PA1 einforcement: High strength wire Coextruded core tube with fl uoropolymer inside TEMPEATUE ANGE: -40 C up to +100 C, short term 15 C 380M-04V / M-05V / Also available in twin design - 13

14 THEMOPLASTIC HOSES ULTA HIGH PESSUE High pressure hydraulic systems for petroleum and synthetic based hydraulic oils. Ideal for hydraulic and rescue tools. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. CONSTUCTION: Covering: einforcement: Type 388N Exceed SAE 10 Black Polyurethane (other colors on request) layers steel wire spiral and layer steel wire braid Polyamide TEMPEATUE ANGE: 40 o C to +100 o C for oil-based hydraulic oils 388N-04V / Type X80N High pressure hydraulic systems for petroleum- and syntheticbased hydraulic oils. Ideal for hydraulic and rescue tools. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. CONSTUCTION: Covering: Black Polyurethane einforcement: Steel wire and aramid combination Polyamide TEMPEATUE ANGE: 40 o C to +100 o C for oil-based hydraulic oils X80N-04V / X80N-06V / X80N-1V / Type 390N (V91) High pressure hydraulic systems for petroleum- and syntheticbased hydraulic oils. Ideal for hydraulic and rescue tools. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. CONSTUCTION: Covering: Black Polyurethane einforcement: Steel wire and aramid combination Polyamide PA11 TEMPEATUE ANGE: 40 o C to +100 o C for oil-based hydraulic oils 390N-06V / X 390N-08V / X 390N-1V / X 390N-16V X 390N-06V91-10K 9.5 3/ X - 14

15 THEMOPLASTIC HOSES ULTA HIGH PESSUE Type 448N (V91) Umbilical hose Available in long lengths for use in subsea umbilicals. CONSTUCTION: Covering: einforcement: Black PA1 4 layers steel wire spiral Methanol washed PA11 TEMPEATUE ANGE: 40 o C to +100 o C +70 o C for water- or methanol-based fluids 448N-04V / N-06V / * 448N-08V / Type 440D/440N Ultra high pressure Hose For use with petroleum or synthetic hydraulic fluids, gases and chemicals. Well suited for hydraulic prestress tools, test rigs and offshore oil applications. The hose is marked with manufacturer, type of hose, working pressure and production date. Also available as pin-prickled - add -P after Part No. CONSTUCTION: Covering: einforcement: 440D Blue Polyamide 440N Black Polyamide 4 layers steel wire spiral 440D Polyoxymethylene 440N Polyamide TEMPEATUE ANGE 40 o C to +70 o C Part No mm inch dash mm bar psi bar psi mm kg/m 440D-05V / D-03V / D-04V / D-05V / N-06V / N-08V / N-1V / N-16V N-06V / N-08V / N-1V / N-16V N-16V91-10k Fitting Series

16 THEMOPLASTIC HOSES ULTA HIGH PESSUE Type 640D/640N Ultra high pressure Hose For use with petroleum or synthetic hydraulic fluids and chemicals. Well suited for hydraulic prestress tools, test rigs and offshore oil applications. The hose is marked with manufacturer, type of hose, working pressure and production date. CONSTUCTION: Covering: Blue Polyamide einforcement: 6 layers steel wire spiral 640D Polyoxymethylene 640N Polyamide TEMPEATUE ANGE: 40 o C to +70 o C 640D-05V / D-03V / D-05V / N-08V / N-1V / N-1V /

17 BLACK EAGLE COLOGAD Back Eagle + Colorgard MAIN FEATUES COLOGAD, dual colour safety feature with extra thick cover for superior abrasion resistance. Plyamide-11 core tube for cleanliness Weight up to 7.5 kg/m Smaller OD than flexible pipe allows more hose per reel Excellent chemical resistance providing long service life in sea water Flexible, lightweight, chemical resistant alternative to steel or flexible pipe. Used for high volume pumping in well service applications such as cementing, chemical injection and other onshore and subsea well stimulation operations. Available in long continuous lengths (500m to,000m depending on size). CONSTUCTION: Core tube: Pressure reinforcement: Cover: Colour: PA11 High strength wire Extra thick polyurethane cover ColorGard TM Safety feature (red inner, black outer cover) TEMPEATUE ANGE: Back Eagle -40 o C up to +70 o C 448N-0V / N-4V / N-4V80-15k / N-3V BL/ 0N-3V BL/ 648N-3V CX 40N-48V TX 440N-48V N-48V Golden Eagle 640M-4V / M-3V BL/ 0M-3V BL - 17

18 THEMOPLASTIC HOSES CHEMJEC Type 40D Ultra high pressure - Pipe cleaning Ultra high pressure hose for cleaning of pipes, heat exchangers, etc. in the chemical and oil industries. The hose can be used as a flexible lance with pressure over 750 bar. The hose is available as a special hose with stainless steel wicker work for added external protection. The hose is marked with manufacturer, type of hose, working pressure and production date. CONSTUCTION: Covering: Blue Polyamide einforcement: layers steel wire spiral Polyoxymethylene TEMPEATUE ANGE: 10 o C to +70 o C for water 40D-0V / TX/AX 40D-05V / TX/AX 40D-03V / TX/AX 40D-04V / TX/AX 40D-05V / TX/AX Ultra high pressure hose for cleaning-applications. Particularly suitable for use in water jet cleaning in production, shipbuilding, ships, tanks, concrete work, etc. Well suited for removing dirt, rust, paint, cement, asphalt, etc. The hose is marked with manufacturer, type of hose, working pressure and production date. Type 388N Ultra high pressure - Blueline Water Jetting CONSTUCTION: Covering: Blue Polyurethane, AL 5001 einforcement: layers steel wire spiral and open layers steel wire spiral Polyamide TEMPEATUE ANGE: 40 o C to +70 o C for water 388N-04V1W 6.3 1/ BS 388N-08V1W / BS - 18

19 THEMOPLASTIC HOSES WATE JETTING HOSES Type 440D/440N Ultra high pressure - Water Jetting Ultra high pressure hose for cleaning-applications. Particularly suitable for use in water jet cleaning in production, shipbuilding, ships, tanks, concrete work, etc. Well suited for removing dirt, rust, paint, cement, asphalt, etc. The hose is marked with manufacturer, type of hose, working pressure and production date. CONSTUCTION: Covering: Polyamide, V3=Blue, V30=Black einforcement: 4 layers steel wire spiral 440D Polyoxymethylene 440N Polyamide TEMPEATUE ANGE: 40 o C to +70 o C for water 440D-05V / D-03V / D-04V / D-05V / N-06V / N-08V / N-1V / N-16V Ultra high pressure hose for cleaning-applications. Particularly suitable for use in water jet cleaning in production, shipbuilding, ships, tanks, concrete work, etc. Well suited for removing dirt, rust, paint, cement, asphalt, etc. The hose is marked with manufacturer, type of hose, working pressure and production date. Type 0N Ultra high pressure - Blueline Water Jetting CONSTUCTION: Covering: einforcement: TEMPEATUE ANGE: Blue Polyurethane 4 layers steel wire spiral and open layers steel wire spiral Polyamide 40 o C to +70 o C for water 0N-06V / BL 0N-08V / BL 0N-1V / BL - 19

20 THEMOPLASTIC HOSES WATE JETTING HOSES Type 640D/640N Ultra high pressure - Water Jetting Ultra high pressure hose for cleaning-applications. Particularly suitable for use in water jet cleaning in production, shipbuilding, ships, tanks, concrete work, etc. Well suited for removing dirt, rust, paint, cement, asphalt, etc. The hose is marked with manufacturer, type of hose, working pressure and production date. CONSTUCTION: Covering: Blue Polyamide einforcement: 6 layers steel wire spiral 640D Polyoxymethylene 640N Polyamide TEMPEATUE ANGE: 40 o C to +70 o C for water 640D-05V / HX/ 640D-03V / HX/ 640D-04V / HX/ 640D-05V / HX/ 640N-08V / HX/ 640N-1V / HX/ 640N-16V HX/ Type 740D Ultra high pressure - Water Jetting Ultra high pressure hose for cleaning-applications. Particularly suitable for use in water jet cleaning in production, shipbuilding, ships, tanks, concrete work, etc. Well suited for removing dirt, rust, paint, cement, asphalt, etc. The hose is marked with manufacturer, type of hose, working pressure and production date. CONSTUCTION: Covering: ed or yellow Polyamide einforcement: 6 layers steel wire spiral Polyoxymethylene TEMPEATUE ANGE: 40 o C to +70 o C for water 740D-05V / HX 740D-03V / HX 740D-05V / HX 740D-08V / HX - 0

21 THEMOPLASTIC HOSES WATE JETTING HOSES Type 840D Ultra high pressure - Water Jetting Ultra high pressure hose for cleaning-applications. Particularly suitable for use in water jet cleaning in production, shipbuilding, ships, tanks, concrete work, etc. Well suited for removing dirt, rust, paint, cement, asphalt, etc. Can replace the steel pipes where flexibility is required. The hose is marked with manufacturer, type of hose, working pressure and production date. CONSTUCTION: Covering: ed Polyamide einforcement: 8 layers steel wire spiral Polyoxymethylene TEMPEATUE ANGE: 40 o C to +70 o C for water 840D-03V / WX 840D-05V / WX 840D-08V / WX - 1

22 CHEMICAL TLE THEMOPLASTIC HOSES atings Code G -Good to excellent. Little or no swelling, tensile or surface changes. Preferred choice. L -Marginal or conditional. Noticeable effects but not necessarily indicating lack of safety. Further testing suggested for specific application. P -Poor or unsatisfactory. Not recommended without extensive and realistic testing. -Indicates that this was not tested. Material Code for Hose Core Tubes polyflex / Parflex Part Numbers H N PV NC TFE POM Polyester elastomer Polyamide Polyvinylchloride (PVC) Nylon co polymer Polytetrafluorethylene (PTFE) Polyoxymethylene Material Code for Hose Covers 040H, 370H, 5H, 8B, 8C, 0H, 8H, LT, 0, 590, 593, 10LT 010N, 00N, X0N, 040N, 44N, 45N, 370N, 440N, 380N, 640N, 50N, 0N, 573X, 573XL, 57, 0N, 8N,, 8 GPH 0A, 5A 030T, 033T, 919, 99, 939/939B, 919U 440D, 640D U Polyurethane 010N, 040N, 040H, 44N, 45N, 370H, 370N, 380N, 0, 830, 838, 5A, 5H, 0A, 8B, 0N, 0H, 8H 0, 50N, 0N, 8N, 590, 593,, 8, 919U HF Special elastomer LT, 10LT PV Polyvinylchloride (PVC) GPH H Polyester elastomer 040N PFX Special elastomer 8C N Polyamide 010N, 00N, X0N, 440D, 440N, 640D45N, 44N Material Code for Sealing Components V FKM O-rings Notes on the Chemical esistance Table (1) The fluid resistance tables are simplified rating tabulations based on immersion tests at 4 C. Higher temperatures tend to reduce ratings. Since final selection depends on pressure, fluid and ambient temperature and other factors not known to Parker Hannifin, no performance guarantee is expressed or implied. The indications do not imply any compliance with standards and regulations and do not refer to possible changes of colour, taste or smell. For food and drinking water specially approved materials have to be used. For fluids not listed or for advice on particular applications, please consult Parker Hannifin GmbH, Polyflex Division in Hüttenfeld, Germany. () Hose applications for these fluids must take into account legal and insurance regulations. The chemical resistance indicated does not express or imply approval by certain institutions. (3) Satisfactory at some concentrations and temperatures, unsatisfactory at others. (4) For gas applications, the cover should be pin-pricked and the pressure must not be released quickly. Special safety guard accessories are to be used to prevent damage or personal injury in the event of failure. (5) Chemical resistance does not imply low permeation rates. Please consult Parker Hannifin for a recommendation for your specific requirements (6)The indication of chemical resistance does not imply any special food compatibility; it refers only to the chemical resistance of the material. (7)Chemical resistance does not imply acceptability for use in airless paintspray applications. These applications require a special, electrically conductive hose. -

23 CHEMICAL TLE THEMOPLASTIC HOSES - 3

24 CHEMICAL TLE THEMOPLASTIC HOSES - 4

25 CHEMICAL TLE THEMOPLASTIC HOSES - 5

26 CHEMICAL TLE THEMOPLASTIC HOSES - 6

27

28