Product catalogue, surface blasting systems

Transcription

1 Product catalogue, surface blasting systems Rotorjets Aquablast - surface blasters Vacuum units Spiderjet Abrasiveinjection nozzle

2 Contents (Navigation via Bookmarks) Rotorjets for manual water blasting Type RD 400 with accessories Type RD 1000 with accessories Type RD 1600 with accessories Type RD Flex 3000 with accessories Rotorjet with pneumatic motor Rotorjets for mechanical deployment Type RDM 200 with accessories Type RDM 250 with accessories Type RDM 250 R with accessories Type RDM 300 with accessories Type RDM 400 with accessories Type RDM 400 R with accessories Type RDM 750 Type RDM 750 R Rotorjets with electric motors Aquablast surface blasters Type FR 1000 with accessories Type FR 1500 with accessories Type FR 3000 Type FRV 2500 with accessories Type FRV 3000 with accessories Type FRE 3000 Type FRWV 3000 Vacuum units and accessories Spiderjet 3000 Abrasive injection nozzle Hammelmann application engineering overview

3 Rotorjets 13.A.1 06/15 Type RD 400 For use with high pressure spray guns SP 1000, SP 1000 ME and high pressure lances. After changing the lance it is also useable for SP 400. Dust tight, encapsulated eddy current brake. Cooling sleeve. Wear resistant rotary action with labyrinth seal. Hollow shaft precisely supported by bearings. Nozzle inserts recessed in nozzle head. With protective cover. Typical applications Cleaning facades, removing old paint. Cleaning concrete, floor tiles and paving. Cleaning heat exchanger externals. External cleaning of construction equipment and tracked vehicles. Cleaning mining machinery and equipment. Technische Daten Operating pressure max.: 400 bar Flow rate max.: 80 l/min. Pressure loss at 25 l/min.: 5 bar Pump power: kw Speed of rotation: min -1 Diameter: 60 mm Connection A/F: 24 mm Connection thread: G ⅜ No. of nozzles: 2 Length: 168 mm Weight: approx. 1,2 kg For nozzle inserts see reverse When working with hand held guns or lances the max. permissable reaction force is 250 N. If the reaction force is over 150 N then the jetting tool must be fitted with a support device such as a shoulder stock.

4 Rotorjets accessories for Type RD A.2 06/15 W Nozzle angle Item no. L Nozzle offset 27 8 Qty A Stand off distance B Working width / single item 10 1 Protect. cover Set screw Item no. 50 Example: Nozzle inserts: Design A, Round jet efficiency factor 0, = see table for last 3 digits of code no. 1, , , , , , ,5 025 Nozzle insert design A, 1,0 mm = O-ring Support ring Nozzle insert selection and optimum performance range Example Parameters: Operating pressure: Flow rate: Select: Correct nozzle : Rotorjet with W = bar 40 l/min 2 x 1,3 mm = Nozzle insert dia. p = Operating pressure Q = Flow rate (without leakage) F = Reaction force Do not exceed right side limit of performance range: Danger of overpowering! For safety rules governing reaction force, see previous page!

5 Rotorjets 13.A.3 06/15 Type RD 1000 For use with high pressure spray guns SP 1000, SP 1000 ME and high pressure lances. After changing the lance it is also useable for SP 400. Dust tight, encapsulated eddy current brake. Cooling sleeve. Wear resistant rotary action with labyrinth seal. Hollow shaft precisely supported by bearings. Nozzle inserts recessed in nozzle head. With protective cover. Typical applications Cleaning facades, removing old paint. Cleaning concrete, floor tiles and paving. Paint spray booth cleaning, (oil, paint overspray etc.) booth floor grids, conveyor chains. Cleaning heat exchanger externals. Removing old expansion joints. Version Version 3 Version 1 Version 2 Version 3 Operating pressure max.: 1000 bar Flow rate max.: 60 l/min. 28 l/min. Pressure loss at 25 l/min.: 10 bar Pump power: kw kw kw Speed of rotation: min -1 Weight approx.: 1.6 kg 1.6 kg 1.7 kg Length: 166 mm Diameter: 60 mm Connection A/F: 24 mm Connection thread: G ⅜ Nozzle inserts: 2 x type A 2 x type P For nozzle inserts see reverse. RD 1000 When working with hand held guns or lances the max. permissible reaction force is 250 N. If the reaction force is over 150 N then the jetting tool must be fitted with a support device such as a shoulder stock. Version 1* Version 2* Version 3* *To select see reverse.

6 Item no. Rotorjet accessories for Type RD 1000 Version A.4 06/15 RD 1000 W Nozzle angle L Nozzle offset Version A Stand off distance B Working width Nozzle inserts: Design A, Round jet efficiency factor 0, = see table for last 3 digits of code no. Version , , , , , , , , , ,4 079 Item no. Qty. per single item 10 1 Protect. cover Set screw O-ring Support ring Example: Nozzle insert design A 0,7 = Nozzle insert selection and optimum performance range Example Parameters: Operating pressure: Flow rate: Select: Correct nozzle : Rotorjet with W = bar 34 l/min 2 x 1,0 mm = Nozzle insert dia. p = Operating pressure Q = Flow rate (without leakage) F = Reaction force Do not exceed right side limit of performance range: Danger of overpowering! For safety rules governing reaction force, see previous page!

7 2x Nozzle - Type P Rotorjet accessories for Type RD 1000 Version 3 13.A.5 06/15 Item no. Qty. / single item 10 1 Protect. cover Set screw Nozzle type P x Item no. 30 Nozzle inserts: Design P, Round jet, efficiency factor: 0, = see table for last 3 digits of code no. 0, , , , , , , ,9 095 Example: Nozzle insert design P, 0,7 mm = Nozzle insert selection and optimum performance range bar mm Operating pressure ,6 10,2 10,8 0,65 11,3 12,0 12,7 0,7 11,4 12,3 13,1 13,9 0,75 11,9 13,1 14,1 15,1 0,8 13,6 14,9 16,1 0,9 15,4 17,2 18,8 1,1 19,9 22,9 1,3 22,7 27,8 Flow - L/min + Leakage 0,3-1,0 L/min

8 Rotorjets 13.A.6 06/15 Type RD 1600 For use with high pressure spray guns, Type SP 2500 and high pressure lances. Dust tight, encapsulated eddy current brake. Cooling sleeve. Wear resistant rotary action with labyrinth seal. Hollow shaft precisely supported by bearings. Nozzle inserts recessed in nozzle head. With protective cover (against blast back).. Typical applications Removing two component paints Grid cleaning. Removing road markings from concrete. Removing strongly adhered old coatings. Cleaning heat exchanger externals Operating pressure: max bar Flow rate: max. 30 l/min. Pressure loss at 15 l/min.: 5 bar Pump power: kw Speed of rotation: min -1 Weight: approx kg Length: 166 mm Diameter: 60 mm Connection A/F: 24 mm Connection thread: M 14 x 1.5 LH No. of nozzles: 2 x type A or B For nozzle inserts see reverse. Accessories Adapter for connection: 9/16 18 UNF LH ⅜ Disassembling tool for wearing sleeve (bronze) RD 1600/ When working with hand held guns or lances the max. permissible reaction force is 250 N. If the reaction force is over 150 N then the jetting tool must be fitted with a support device such as a shoulder stock.

9 Item no. Rotorjets accessories for Type RD A.7 06/15 W Nozzle angle Item no. L Nozzle offset 20 8 Qty. A Stand off distance B Working width per single item 10 1 Protect. cover Set screw O-ring Support ring Example: Nozzle inserts: Design A, Round jet efficiency factor 0, = see table for last 3 digits of code no. 0, , , , , , ,1 076 Nozzle insert design A 0,6 = Nozzle inserts selection and optimum performance range Example Parameters: Operating pressure: Flow rate: Select: Correct nozzle : 1200 bar 28 l/min 2 x 0,8 mm = Nozzle insert dia. p = Operating pressure Q = Flow rate (without leakage) F = Reaction force Do not exceed right side limit of performance range: Danger of overpowering! For safety rules governing reaction force, see previous page!

10 Rotorjets 13.A.8 06/15 Type RD Flex 3000 with adjustable rotation speed Designed for use with the SP 3000 and Ergoblast guns, lances etc. Low wear, leakage free rotating components. Internal protected brake. Quick change seal system. Nozzle inserts are countersunk in the nozzle carrier. Nozzle carrier protected by blast back shield. Aluminium protective sleeve. When working with hand held guns or lances the maximum permissible axial reaction force is 250 N. If the reaction force exceeds 150 N the blasting tool must be fitted with a support device such as a shoulder stock. Operating pressure: max bar Flow rate: l/min. Pressure loss at 19 l/min.: 30 bar Pump power: see at the table Speed of rotation: min -1 Weight: 1.8 kg Length: 236 mm Diameter: 74 mm Connection A/F: 24 mm Connection thread: M 14 x 1.5 LH Nozzle inserts: max. 6 Typical applications Renovation: surface layer (render etc.) removal, paint removal, facade cleaning. Cleaning and washing concrete structures. Expansion joint removal. Side wall cleaning in phosphate plants Coating and paint removal from metal surfaces. Blasting pipe externals. Paint booth grid and skid clean up. Hull, deck and superstructure surface preparation, heavy machinery clean up in the ship repair industry. Surface preparation on awkward metal profiles. Accessories Adapter for connection 9/16 18 UNF LH ⅜ Connection piece M14 x 1,5 LH (i) - M14 x 1,5 LH (a) [max. 1000bar] Snap ring Tool for assembling the sealing and carbide sleeve of the hollow shaft Tool for assembling the snap ring (pos. 410) Set of wearing parts Set of spare parts Rotorjet type Pump power Suitable nozzle inserts Connection RD Flex kw Type P and T M 14 x 1.5 LH RD Flex kw Type P and T M 14 x 1.5 LH RD Flex 3002 RD Flex kw kw Type P and T Type P and T M 14 x 1.5 LH /16 18 UNF LH M 14 x 1.5 LH /16 18 UNF LH RD Flex kw Type K M 14 x 1.5 LH RD Flex kw Type P and T M 14 x 1.5 LH

11 Rotorjets nozzle diagram for Type RD Flex A.9 06/15 RD Flex 3001 For 3 x nozzle Type P Nozzle Operating pressure in bar dia. in mm ,35 8,5 9,0 9,3 0,40 9,9 10,4 10,6 10,8 11,1 11,7 12,1 0,45 11,9 12,5 13,1 13,4 13,7 14,0 0,50 14,7 14,5 0,55 17,7 Flow rate in l/min For 3 x nozzle Type T Nozzle Operating pressure in bar dia. in mm ,30 8,2 8,7 9,0 0,35 10,0 10,4 10,7 10,9 11,1 11,8 12,2 0,40 12,3 13,0 13,6 13,9 14,2 0,45 15,6 16,5 0,50 15,1 15,9 Flow rate in l/min RD Flex 3002 For 3 x nozzle Type P Nozzle Operating pressure in bar dia. in mm ,45 14,8 15,3 0,50 16,2 16,6 16,9 17,3 18,3 18,9 0,55 18,7 19,6 20,1 20,5 20,9 0,60 21,1 22,3 23,3 Flow rate in l/min For 3 x nozzle Type T Nozzle Operating pressure in bar dia. in mm ,40 19,5 20,2 0,50 16,7 17,1 17,4 17,8 18,8 19,5 0,55 19,2 20,2 20,6 21,1 21,5 0,60 21,7 22,9 24,0 Flow rate in l/min RD Flex 3004 For 2 x nozzle Type K Nozzle Operating pressure in bar dia. in mm ,50 12,3 13,1 15,3 0,55 14,0 14,3 14,6 14,9 15,8 18,9 0,60 15,9 16,7 17,1 17,4 17,8 18,8 19,5 0,70 20,5 21,6 22,7 Flow rate in l/min Deviations from these nozzle combinations only after consultation with the manufacturer! RD Flex 3005 For 5 x nozzle Type P Nozzle Operating pressure in bar dia. in mm ,35 13,8 14,1 14,7 15,2 0,40 15,6 16,3 16,9 17,3 17,7 18,1 19,2 20,0 0,45 19,2 20,3 21,4 22,0 0,50 23,8 25,1 Flow rate in l/min For 5 x nozzle Type For 3 x nozzle Type T Nozzle Operating pressure in bar dia. in mm ,30 13,4 14,2 14,7 0,35 16,2 17,0 17,4 17,8 18,2 19,3 0,40 20,0 21,1 22,2 22,7 0,45 25,3 26,7 Flow rate in l/min RD Flex 3003 For 6 x nozzle Type P Nozzle Operating pressure in bar dia. in mm ,30 13,2 13,6 0,35 15,2 15,9 16,2 16,6 16,9 17,9 18,6 0,40 18,8 19,8 20,8 21,2 21,7 22,1 0,45 23,8 25,0 Flow rate in l/min For 6 x nozzle Type T Nozzle Operating pressure in bar dia. in mm ,25 12,0 12,4 0,30 15,3 15,7 16,0 16,4 17,3 17,9 0,35 19,9 20,9 21,4 21,8 22,3 0,40 24,7 Flow rate in l/min Hammelmann Postfach 3309 D Oelde Telefon 0,45 ( ,622) 12, ,7 Flow rate in l/min RD Flex 3006 For 3 x nozzle Type P Nozzle Operating pressure in bar dia. in mm ,25 4,7 0,30 5,8 6,0 6,1 6,2 6,6 6,8 0,35 6,8 7,2 7,6 8,0 8,1 8,3 8,5 0,40 7,7 8,9 8,4 9,9 0,45 8,9 9,7 11,2 Flow rate in l/min For 3 x nozzle Type T Nozzle dia. in mm Operating in bar ,25 6,2 0,30 7,7 7,8 8,0 8,2 8,7 9,0 0,35 8,9 9,4 10,0 10,4 10,7 10,9 11,1 0,40 10,1 11,6 12,3 13,0

12 Rotorjets 13.A.10 06/15 Type RD Flex 3000 MONO with adjustable rotation speed Designed for use with the SP 3000 and Ergoblast guns, lances etc. Low wear, leakage free rotating components. Internal protected brake. Quick change seal system. Nozzle inserts are countersunk in the nozzle carrier. Nozzle carrier protected by blast back shield. Aluminium protective sleeve. Typical applications Renovation: surface layer (render etc.) removal, paint removal, facade cleaning Concrete renovation: surface roughening, removal, exposing reinforcing bars Surface cleaning. Paint removal from metal surface Removing resilient coatings. Descaling and cleaning of ships hulls, turbine wheels, propellers and spot blasting. Operating pressure: max bar Flow rate: max. 30 l/min. Pressure loss at 19 l/min.: 30 bar Pump power: see at the table Speed of rotation: min -1 Weight: 2.3 kg Length: 205 mm Diameter: 75 mm Connection A/F: 24 mm Connection thread: M 14 x 1.5 LH Nozzle inserts: 1 piece When working with hand held guns or lances the maximum permissible axial reaction force is 250 N. If the reaction force exceeds 150 N the blasting tool must be fitted with a support device such as a shoulder stock. Accessories Adapter for connection 9/16 18 UNF LH ⅜ Connection piece M14 x 1,5 LH (i) - M14 x 1,5 LH (a) Driving nozzle for RD Flex 3000 MONO 1 Driving nozzle for RD Flex 3000 MONO [max. 1000bar] Tool for driving nozzle Protection cap Wearing ring Rotorjet type Operating pressure Suitable nozzle inserts Connection thread RD Flex 3000 MONO bar Type P and T * M 14 x 1,5 LH RD Flex 3000 MONO bar Type P and T * M 14 x 1,5 LH * Nozzle selection according to the chart and data sheet (chapter 12.J.15 / 12.J.18). Note the maximum permissible reaction forces (150 N / 250 N).

13 Rotorjet with pneumatic rotary drive 13.C.1 10/13 nozzle holder with five powerful, highly cohesive jets especially designed for metal surface preparation for use with high pressure spray guns Type SP 3000 and high pressure lances high pressure connection, swivel position adjustable integrated pneumatic drive adjustable speed wear resistant rotary action high pressure seals easily replaced nozzle inserts recessed in nozzle head plastic protection cover or plastic baffle plate rotary joint (pneumatic) Operating pressure: Flow rate: Weight : High pressure connection: max bar 20 l/min 2,6 kg M 14 x 1,5 LH Rotation speed: r.p.m. Performance: max. 150 W Operating air pressure: 4-6 bar Air input: max. 25 m³/h Medium: filtered and oiled air Hose connection: 9 mm snap coupling. Accessories (without picture) Portable pneumatic control/maintenance unit with 5 m hose and snap coupling 9 mm i/d air supply hose with fittings, 20 m long Tool for rotary joint Baffle plate for concrete renovation Tool for assembling the sealing and carbide sleeve of the hollow shaft Copyright Hammelmann Maschinenfabrik GmbH, Oelde, Germany. Rights reserved to modify design.

14 Rotorjets 13.B.1 06/15 Type RDM 200 Designed for mechanical deployment Stainless steel housing Dust tight, encapsulated eddy current brake Cooling sleeve Wear resistant rotary action with labyrinth seal Axial nozzle arrangement. Nozzles can be arranged radially for pipe cleaning Typical applications Cleaning pipes, boilers, furnaces Roughening concrete surfaces Connection thread M 24 x 1, M 36 x Operating pressure max.: 1000 bar Flow rate max.: 160 l/min. Pressure loss at 60 l/min.: 5 bar Pump power: kw Speed of rotation: min -1 Weight approx.: 8 kg Length: 239 mm Diameter: 90 mm Connection A/F: 41 mm Connection threads: see left No. of nozzles: 2 For nozzle inserts see reverse. Optional: Sledge (suitable for internal diameter from mm)

15 Item no. Rotorjets Accessories for Type RDM B.2 06/15 W Nozzle angle L Nozzle offset axial radial Item no. 10 Protection cover Screw O-ring Nozzle inserts Pulling mech * * to be used solely with radial nozzles. (see R above) A R 40 Nozzle inserts: Design A, Round jet efficiency factor: 0, = see table for last 3 digits of code no. 1, , , , , , , , , , , , , , , , , , , , , , , , , ,0 090 Nozzle insert selection and optimum performance range Example Parameters: Operating pressure: Flow rate: Select: Correct nozzle : Brake fully engaged 600 bar 100 l/min 2 x 1,8 mm = Nozzle insert dia. p = Operating pressure Q = Flow rate (without leakage) Do not exceed right side limit of performance range: Danger of overpowering! For safety rules governing reaction force, see previous page!

16 Rotorjets 13.B.3 06/15 Type RDM 200 Designed for automatic pipe cleaning Stainless steel housing Dust tight, encapsulated eddy current brake Cooling sleeve Wear resistant rotary action with labyrinth seal Radial nozzle arrangement. Especially for pipe cleaning Typical applications Cleaning pipes, boilers, furnaces Operating pressure max.: 1000 bar Pressure loss at 180 l/min.: 5 bar Pump power: kw Speed of rotation: min -1 Weight approx.: 11,5 kg Length: 376 mm Diameter: 128 mm Connection A/F: 41 mm Connection thread: M 36 x 2 No. of nozzles: 4 For nozzle inserts see reverse. Optional: Sledge (suitable for internal diameter from 125 to 500 mm)

17 Item no. Rotorjet Accessory for Type RDM B.4 06/15 W Nozzles angle L Nozzle offset radial R 10 Nozzle inserts: Design A, Round jet, efficiency factor: 0, = see table for last 3 digits of code no. 1, , , , , , , , , , , , , , , , , , , , , , , , , ,0 090

18 Rotorjets 13.B.5 06/15 Type RDM 250 Version 1 Designed for mechanical deployment Stainless steel housing Version 2 Dust tight, encapsulated eddy current brake Cooling sleeve Wear resistant rotary action with labyrinth seal Axial and radial nozzle arrangement especially for pipe cleaning Typical applications Cleaning pipes, boilers, furnaces Roughening concrete surfaces Coating and paint removal Version 1 Version 2 Operating pressure max.: 1500 bar Flow rate max.: 120 l/min. Pressure loss at 35 l/min.: 5 bar Pump power: kw Speed of rotation: min -1 Weight approx.: 8 kg 10 kg Length: 267 mm 300 mm Diameter: 90 mm 128 mm Connection A/F: 32 mm Conn. thread: M 24 x 1,5 DKO No. of nozzles: 4 6 Nozzle inserts see table. RDM 250 Version Version Optional: Sledge (suitable for internal diameters from 125 to 500 mm) Pulling mechanism (for use with radial nozzle arrangement)

19 Item no. Rotorjets Accessories for Type RDM B.6 06/15 Version 1 W Nozzle angle Version 2 L Nozzle offset axial radial W Nozzle angle L Nozzle offset axial 45 0 radial 90 7 radial A A R R 50 Nozzle inserts: Design A, Round jet efficiency factor: 0, = see table for last 3 digits of code no. 0, , , , , , , , , , , , , ,0 023 Plug: Nozzle insert selection and performance range for Version 2 upon request. Nozzle insert selection and optimum performance range for Version 1 Example Parameters: Operating pressure: Flow rate: Select: Correct nozzle : Brake fully engaged 1400 bar 80 l/min 2 x 1,3 mm = Nozzle insert dia. p = Operating pressure Q = Flow rate (without leakage) Do not exceed right side limit of performance range: Danger of overpowering! For safety rules governing reaction force, see previous page!

20 Rotorjets 13.B.7 06/15 Type RDM 250 R Suitable for mechanically deployed cleaning systems Stainless steel housing Dust tight, encapsulated eddy current brake Connection thread M 24 x 1,5 DKO-S Cooling sleeve and optional protective cover Wear resistant rotary action with labyrinth seal Suitable for adding extension arms and nozzle holders with adjustable angles Typical applications Cleaning pipes, boilers, furnaces Roughening concrete surfaces Coating and paint removal Example: Rotorjet with nozzle holder and extension arm Operating pressure max.: 1500 bar Flow rate max.: 100 l/min. Pressure loss: 5 bar Speed of rotation: min -1 Weight approx.: 8,6 kg Länge: 273 mm Nominal diameter: DN 6 Diameter: 90 mm Connection A/F: 36 mm Connection thread: M 24 x 1,5 DKO-S Nozzle inserts: Extension arm + Nozzle holder + Nozzles type A or B Leakage: 1,0 (+ 3,0) l/min

21 Rotorjets Accessories for Type RDM 250 R 13.B.8 06/15 Following nozzle holders can be used: Angle Quantity * * * * Nozzle design A or B Following extension arms can be used: Length [mm] Quantity Optional: Sledge (suitable for internal diameters from 350 to 850 mm) Pulling mechanism (to be used solely with radial nozzles) all for RDM

22 Rotorjets 13.B.9 06/15 Type RDM 300 Designed for mechanical deployment Low rotational speed Stainless steel housing Dust tight, encapsulated eddy current brake Cooling sleeve Wear resistant rotary action with labyrinth seal Axial nozzle arrangement. Nozzle can be arranged radially for pipe cleaning Typical applications Cleaning pipes, boilers, furnaces Roughening concrete surfaces Connection thread M 24 x 1, M 36 x Operating pressure max.: 1000 bar Flow rate max.: 180 l/min. Pressure loss at 60 l/min.: 5 bar Pump power: kw Speed of rotation: min -1 Weight approx.: 8,2 kg Length: 239 mm Diameter: 90 mm Connection A/F: 41 mm Connection threads: see left No. of nozzles: 2 For nozzle inserts see reverse. Optional: Sledge (suitable for internal diameters from 125 to 500 mm)

23 Rotorjets Accessories for Type RDM B.10 06/15 Item no. W Nozzle angle L Nozzle offset axial radial A 10 Protection cover Screw O-ring Nozzle inserts Pulling mechanism * * to be used solely with radial nozzles. (see R above) R Nozzle insert: Design A, Round jet efficiency factor: 0, = see table for last 3 digits of code no. 1, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,3 093 Nozzle insert selection and optimum performance range Example Parameters: Operating pressure: Flow rate: Select: Correct nozzle : Brake 2/3 engaged 600 bar 90 l/min 2 x 1,7 mm = Nozzle insert dia. p = Operating pressure Q = Flow rate (without leakage) Do not exceed right side limit of performance range: Danger of overpowering! For safety rules governing reaction force, see previous page!

24 Rotorjets 13.B.11 06/15 Type RDM 400 Designed for mechanical deployment Stainless steel housing Dust tight, encapsulated eddy current brake Wear resistant rotary action with labyrinth seal Axial nozzle arrangement. Nozzles can be arranged radially for pipe cleaning Protective cover (against blast back) optional Typical applications Cleaning pipes, boilers, furnaces Roughening concrete surfaces Coating and paint removal Optional: Operating pressure max.: 1400 bar Flow rate max.: 200 l/min. Pressure loss at 130 l/min.: 5 bar Pump power: kw Speed of rotation: min -1 Weight approx.: 28 kg Length: 418 mm Diameter: 130 mm Connection A/F: 41 mm Connection thread: M 36 x 2 DKO No. of nozzles: 2 For nozzle inserts see reverse. Sledge (suitable for internal diameters from 125 to 500 mm) Retaining ring Hexagon socket head screw

25 Item no. Rotorjets Accessories for Type RDM B.12 06/15 W Nozzles angle L Nozzle offset axial radial Item no. 10 Protection cover Screw Cylinder ring Nozzle inserts Pulling mechanism * * to be used solely with radial nozzles. (see R above) A R 40 Nozzle inserts: Design A, Round jet efficiency factor: 0, = see table for last 3 digits of code no. 0, , , , , , , , , , , , , ,0 023

26 Rotorjets 13.B.13 06/15 Type RDM 400 R Designed for pipe cleaning with pipe internal- of min. 300 max. 800 mm (standard equipment for pipe internal- of 300 mm) Stainless steel housing Radial nozzle arrangement Reaction force driven Dust tight, encapsulated eddy current brake With interchangeable nozzle extension arms Typical applications Cleaning pipes, boilers and furnaces Operating pressure max.: 2500 bar Flow rate max.: 100 l/min. (at p = 30 bar) Pump power: kw Speed of rotation: min -1 Weight approx.: 42 kg Length: 344 mm Diameter: 260 mm (standard) Connection thread: M 30 x 2 No. of nozzles: 4 Nozzles: Type I Optional: Sledge (suitable for internal from 400 mm to 1400 mm)

27 Item no. Rotorjets Accessories for Type RDM 400 R 13.B.14 06/15 W Nozzle angle L Nozzle offset radial Item no. 10 Pulling mechanism Seal lens Cap nut Pressure ring Pressure screw Nozzle holder cpl. (consists of item 30, 50, 60 and 70) A R Item 20 mm Nozzle inserts: Design I, round jet, Efficiency factor: 0, = see table for last 3 digits of code no. mm mm 0, , , , , , , , ,1 337 mm Nozzle extension arms for pipe internal- 300 mm mm mm mm mm mm

28 Rotorjets 13.B.15 06/15 Type RDM 750 Designed for mechanical deployment Stainless steel housing Adjustable, dust tight and encapsulated eddy current brake Wear resistant rotary action with labyrinth seal Axial nozzle arrangement. With protective cover 250 mm Typical applications Cleaning pipes, boilers, furnaces Roughening concrete surfaces Coating and paint removal Operating pressure max.: 1600 bar Flow rate max.: 400 l/min. Pressure loss at 300 l/min.: 5 bar Pump power: kw Speed of rotation: min -1 Weight approx.: 72 kg Length: 635 mm Diameter: 250 mm Connection A/F: 46 mm Connection thread: M 36 x 2 DKO No. of nozzles: 2 Nozzle: Type L (axial)

29 Rotorjets 13.B.16 06/15 Type RDM 750 R Designed for pipe cleaning with pipe internal- of approx. max. 800 mm Stainless steel housing Radial nozzle arrangement Reaction force driven Dust tight, encapsulated eddy current brake Wear resistant rotary action with labyrinth seal. Typical applications Cleaning pipes, boilers and furnaces Operating pressure max.: 1600 bar Flow rate max.: 300 l/min. (at p = 5 bar) Pump power: kw Speed of rotation: min -1 Accessory: Weight approx.: Length: Diameter: Connection: No. of nozzles: Nozzles: 65 kg 600 mm 166 mm (standard) M 36 x 2 DKO 6 (radial) 2 x 45 - push 2 x 90 - radial 2 x pull Type L Pulling mechanism Pulling load max. 20 KN with bore ø 14 mm D=77 mm; L=206 mm Weight: 3,1 kg

30 Rotorjets with electrically powered rotary joint 13.N.1 06/15 Picture shows rotorjet Operating pressure: Flow rate: High pressure water connection thread: With high pressure packing version. Complete with electric plug and 6 m connecting cable. (cable protection hose not included) max bar 100 l/min M 26 x 1,5 female 4 pole Electric motor: Power: 1,5 kw Rotation speed: 1450 min -1 Voltage: 3 x 400 V Frequency: 50 Hz Protection: IP 67 8 pole Electric motor: Power: 0,55 kw Rotation speed: 720 min -1 Voltage: 3 x 400 V Frequency: 50 Hz Protection: IP 67 Spray bar 2 nozzles Working diameter 305 mm mm mm mm mm Spray bar Working diameter 2 nozzles 215 mm nozzles 203 mm nozzles 185 mm mm nozzles 241 mm /110 mm mm nozzles 400/280 mm Accessory Assembling tool of the thread ring at the rotary drive, code no

31 AQUABLAST surface blasters 13.D.1 06/15 Type FR 1000 Spray bar driven by reaction force of the water jets Wear resistant rotary action with labyrinth seal Optional pressure on/off control. Mechanical bypass valve or electric in 4-pole system signal to pump. Special controls available upon request. On/Off control by twin trigger action Height adjustable spray bar Three wheel carriage Typical applications Grid cleaning Floor cleaning Coating removal Working width: 300 mm 500 mm Operating pressure: max bar 1000 bar Flow rate: max. 160 l/min. 160 l/min. Pressure loss at 100 l/min.: 5 bar 5 bar Pump power: max. 170 kw 170 kw Speed of rotation: 1500 min min -1 Spray bar for concrete removal (abrasive action) Weight: 115 kg 122 kg Length: approx mm 1825 mm Height: approx. 950 mm 900 mm Unit width: approx. 370 mm 550 mm Pressure on/off mechanical electrical Connection nipple see reverse! Nozzle inserts A and B

32 AQUABLAST FR 1000 accessories and spares 13.D.2 06/15 Item no. Qty. per single item 10 4 Screw Spray bar housing Sleeve Spring washer Nut Rotary joint Ring Set screw Split ring Seal lens Spray bar complete: items O-ring Retaining nut Spring washer Screw Nozzle insert design A see chapter Glyd ring Connection nipple Operating pressure M 22 x 1,5 DKO NW bar M 22 x 1,5 DKL NW bar M 24 x 1,5 DKO NW bar M 30 x 1,5 DKM NW bar M 36 x 2 DKO NW bar M 42 x 2 DKO NW bar Stability weight Screw Spring washer

33 AQUABLAST surface blasters 13.D.3 06/15 Type FR 1500 Spray bar driven by reaction force of the water jets Wear resistant rotary action with labyrinth seal Optional pressure on/off control. Mechanical bypass valve or electric in 4-pole system signal to pump. Special controls available upon request. On/Off control by twin trigger action Four wheel carriage Choice of version with or without protection for spray bar. Typical applications Aquablast without protection Grid cleaning Paint removal on steel plates Aquablast with protection Floor cleaning Roughening concrete surfaces Removing road markings from concrete Working width: 400 mm Operating pressure: max bar Flow rate: max. 150 l/min. Pressure loss at 50 l/min.: 5 bar Pump power: max. 200 kw Speed of rotation: 1000 min -1 Length: approx mm Height: approx. 900 mm Unit width: approx. 450 mm Connection thread: M 24 x 1,5 DKO-S AQUABLAST may only be driven with four nozzles. Nozzle inserts Type A and B Grid cleaning (without protection) Concrete removal (with protection) Pressure on/off Weight [kg] mechanical electrical mechanical electrical Code No. Extra weight, 33 kg

34 AQUAJET FR 1500 accessories and spares 13.D.4 06/15 Item no. 10 Qty. / per single item 1 High pressure hose Hose arrester Karabiner hook Screw Spring washer Screw Spring washer Sleeve Nut Rotary joint Set screw Flange Split ring Seal lens Spray bar for grid cleaning Spray bar for concrete removal Spring washer Screw Sleeve Nozzle insert design A see chapter Retaining nut Spray bar complete: items without nozzle inserts

35 AQUABLAST surface blasters 13.D.5 06/15 Type FR 3000 Spray bar driven by reaction force of the water jets Height adjustable spray bar Wear resistant rotary action with labyrinth seal Spray bar housing with special seal and suction outlets Electrical pressure on/off control in 4-pole system Four wheel carriage Typical applications Cleaning up petrol, oil and grease deposits Construction industry Removing paints, mastics, laitance, adhesion inhibitors, renderings etc. Brightening thermoplastic flooring Scarifying concrete and asphalt Working width: 215 mm Operating pressure: max bar Flow rate: max. 40 l/min. Pressure loss at 40 l/min.: 60 bar Speed of rotation: max min -1 Weight: 76 kg Length: approx mm Height: approx. 900 mm Marine industry Removing paint, deck coatings, rust etc. Connections: Bypass control cable: High pressure hose: ITT-plug M 14 x 1,5 LH Pressure on/off electrical 3000 bar Nozzle inserts Type P (16 pieces)

36 AQUABLAST for marking removal 13.D.6 06/15 Type FRE 3000 Electrically driven spray bar and drive carriage controlled by a frequency converter to achieve optimal speed combination to suit the job in hand. Twin handgrip pressure control. Four wheel drive carriage. Anti splash brush seal. Carriage drive cut out for manual deployment. Typical applications road marking removal Working width: 350 mm Op. pressure: max bar Flow rate: max. 40 l/min Pressure loss at 40 l/min: 60 bar Pump power: max. 170 kw Spray bar speed: 2-pole motor: min -1 Power requirement: 3 kw V Hz Removal rates: approx m/h (depending upon marking material) Weight: approx. 150 kg Length: approx mm Height: approx mm Unit width: approx. 550 mm No. of nozzles: 20 pieces Nozzle type: P Connection thread: M 26 x 1,5 (Pressure collar/pressure nut)

37 AQUABLAST -PLUS surface blasters 13.E.1 06/15 Type FRV 2500 Available with and without direct vacuuming of water and waste material. Spray bar driven by reaction force of the water jets. Optimum spray bar design with 4 nozzle arms enabling the fitting of up to 16 nozzle inserts. Height adjustable spray bar Wear resistant rotary action with dynamic high pressure seal. Spray bar housing with special seal and suction outlets. Mechanical bypass valve. Four wheel carriage. Typical applications Direct vacuuming allows the use of high pressure water blasting in factories and machine shops without halting production or on roads, upper storeys of buildings etc. without the need for closure. Cleaning PLUS vacuuming of petrol, oil and grease deposits. Construction industry Removing PLUS vacuuming of paints, mastics, laitance, adhesion inhibitors, renderings etc. Brightening PLUS vacuuming of thermoplastic flooring. Scarifying PLUS vacuuming of concrete and asphalt. Marine industry Removal PLUS vacuuming of paint, deck coatings, rust etc. Working width: 215 mm Operating pressure max.: 2500 bar Flow rate max.: 40 l/min. Pressure loss at 40 l/min.: 60 bar Reaction force max.: 550 N Perm. speed of rotation max.: 3000 min -1 Weight with 10 m suction hose: 130 kg Weight without suction hose: 86 kg Length approx.: 1430 mm Height approx.: 960 mm Connections: High pressure hose: M 14 x 1.5 LH, bs. Suction hose: B-coupling Pressure on/off Mechanical with suction and pressure hose Mechanical without suction and pressure hose Suction and pressure hose Nozzle inserts Type P 16 pieces

38 AQUABLAST -PLUS FRV 2500 Accessories and Spares 13.E.2 06/15

39 AQUABLAST -PLUS FRV 2500 Accessories and Spares 13.E.3 06/15 AQUABLAST PLUS FRV 2500 Item no. Quantity / per piece m hose assy. incl. HP hose, suction hose Rotary connection jet spray bar Inner brush, large (standard) only for Q 25 l/min Inner brush, fine, only for Q 25 l/min Outer brush, large (standard) for rough surfaces i.e. concrete Outer brush, fine, for smooth surfaces i.e. steel plate Protective cover for spray bar Protective cover for spray bar Protective cover for spray bar Protective cover for spray bar Protection for hub total 16 Nozzle inserts Type P, M x Plug M 10 (as required)

40 AQUABLAST -PLUS surface blasters 13.E.4 06/15 Type FRV 3000 Available with and without direct vacuuming of water and waste material Spray bar driven by reaction force of the water jets Optimum spray bar design with 4 nozzle arms enabling the fitting of up to 16 nozzle inserts. Height adjustable spray bar Wear resistant rotary action with dynamic high pressure seal Spray bar housing with special seal and suction outlets Electrical pressure on/off control in 4-pole system. Four wheel carriage Typical applications Direct vacuuming allows the use of high pressure water blasting in factories and machine shops without halting production or on roads, upper storeys of buildings etc. without the need for closure Cleaning PLUS vacuuming of petrol, oil and grease deposits Construction industry Removing PLUS vacuuming of paints, mastics, laitance, adhesion inhibitors, renderings etc. Brightening PLUS vacuuming of thermoplastic flooring Scarifying PLUS vacuuming of concrete and asphalt Marine industry Removing PLUS vacuuming of paint, deck coatings, rust etc. Working width: 215 mm Operating pressure max.: 3000 bar Flow rate max.: 40 l/min. Pressure loss at 40 l/min.: 60 bar Reaction force max.: 550 N Perm. speed of rotation max.: 2500 min -1 Weight with 10 m suction hose: 130 kg Weight without suction hose: 86 kg Length approx.: 1430 mm Height approx.: 960 mm Connections: Bypass control cable: ITT-plug High pressure hose: M 14 x 1.5 LH, bs. Suction hose: B-coupling Pressure on/off electrical without suction and pressure hose Suction and pressure hose with control cable Nozzle inserts Type P 16 pieces

41 AQUABLAST -PLUS FRV 3000 Accessories and Spares 13.E.5 06/15

42 AQUABLAST -PLUS FRV 3000 Accessories and Spares 13.E.6 06/15 AQUABLAST PLUS FRV 3000 Item no. Quantity / per piece m hose assy. incl. HP hose, suction hose, electric cable Rotary connection jet spray bar Inner brush, large (standard) only for Q 25 l/min Inner brush, fine, only for Q 25 l/min Outer brush, large (standard) for rough surfaces i.e. concrete Outer brush, fine, for smooth surfaces i.e. steel plate Protective cover for spray bar Protective cover for spray bar Protective cover for spray bar Protective cover for spray bar Protection for hub total 16 Nozzle inserts Type P, M x Plug M 10 (as required)

43 AQUABLAST - Drive Surface blaster 13.E.7 06/15 With direct vacuuming of water and waste material. Spray bar driven by reaction force of the water jets Optimum twin spray bar design with 2 x 4 nozzle arms enabling the fitting of up to 8 nozzle inserts. Includes protective plates. Wear resistant rotary action with labyrinth packing. Spray bar housing with special seal and suction connections. Typical applications Direct vacuuming allows the use of high pressure water blasting in factories and machine shops without halting production or on roads, upper storeys of buildings, cleaning landing runways etc. without the need for closure. Cleaning and vacuuming of petrol, oil and grease deposits. Construction industry Removing and vacuuming of paints, mastics, laitance, adhesion inhibitors, renderings etc. Brightening and vacuuming of thermoplastic flooring. Scarifying and vacuuming of concrete and asphalt. Working width: Operating pressure max.: Flow rate max.: Pressure loss at 240 l/min.: Total weight: Length: Height: Width: High pressure hose: Vacuum: Vehicle: Drive: Engine power: 1000 mm 1000 bar 240 l/min. 10 bar 890 kg ca mm ca mm ca mm M 24 x 1.5 DKO-S bar Kubota F wheel 22.4 kw Nozzle inserts Type A 8 pieces Aquablast - Drive Suction hose DN 100 (Length: 30 m) Vacuum system

44 AQUABLAST - Drive Surface blaster 13.E.8 06/15 Aquablast-Drive High pressure pump unit Vacuum system Suction hose DN 100, 30 m long Vacuum system A two chamber system to vacuum and pre-filter the used high pressure water. Consisting of: Stationary waste collection unit with rigid, torsion free frame on shock absorbers and forklift shoes. Waste water and solids are separated within the system for further disposal. The pre-cleaned waste water is pumped out of the unit so that downtime is minimised. Separator collects materials in suspension. Hinged doors to allow solids removal. De-watering pump with over suction protection. Sight glass for monitoring content level. Pre-separator: Fiine-separator: Throughput: Vacuum: Drive: Weight: 630 Liter 430 Liter 650 m³/h 240 mbar 3-cylinder diesel engine 1.5 t Vacuum system

45 Hand held AQUABLAST 13.F.1 06/15 Type FRWV 3000 Ergonomic hand held cleaning and stripping unit Twin trigger operation Aluminium housing with all water bearing parts from stainless steel Brush arrangement ensures that stand off distance is maintained Connection for vacuum system Typical applications Cleaning, stripping vertical surfaces Ship repair removing marine growths, stripping hull coatings above and below the water line Construction industry removing paint from facades and other concrete surfaces Cleaning tanks Working width: 140 mm Operating pressure: max bar Speed of rotation: approx min -1 System 4 pole system with pneumatic control Weight pneumatic control approx. 9,3 kg electric control approx. 7,7 kg Height: approx. 174 mm Width incl. hand grip: approx. 350 mm Accessory protection for abrasive work nozzle inserts Type P

46 Vacuum unit 13.K.1 06/15 HAMMELMANN Vacuum unit for operation with the HAMMELMANN AQUABLAST Plus (FRV FRV 3000) and the hand held AQUABLAST. Comprising: Manually deployed waste collection unit. Waste water and solids are separated within the system for further disposal. The pre-cleaned waste water is pumped out of the unit so that downtime is minimised. Separator collects materials in suspension. Hinged doors to allow solids removal. Power connection via heavy duty plug with phase inverter. De-watering pump with over suction protection. Sight glass for monitoring content level. Lockable casters. High mobility with forklift shoes and lifting eyes. Length: Width: Height: Weight: Tank capacity: approx mm approx. 970 mm approx mm approx. 670 kg 2 x 230 l Vacuum unit Power required: 5,5 kw Vacuum: 200 mbar Suction volume: 200 m 3 /h Connections Water out: Suction in: 1 GEKA coupling B coupling Centrifugal pump: Vacuum pump: * The integral safety valve prevents too great a vacuum and thus the overheating of the vacuum pump. Accessories Suction hose 50 mm i/d (standard), 15 m Suction hose 65 mm i/d (extension), 10 m Copyright Hammelmann GmbH, Oelde, Germany. Technische Änderungen vorbehalten.

47 Vacuum system with vacuum unit and separator 13.K.2 06/15 Hammelmann VACU-TAINER 2500 for operation in conjunction with the HAMMELMANN SPIDERJET 3000 Comprising: Vacuum unit In sound damping container (H x W x L) 2500 x 2050 x 2000 mm with forklift shoes. Roots blower. Manual speed adjustment. Engine complete with fuel filter and exhaust. Safety filter changeable. Unit and diesel engine controls accessed from outside the system via a lockable door. Continuous performance: approx m 3 /h, (Zero load) Speed of rotation: approx min -1 Suction connection: DN 150 Continuous partial vaccum: up to 50 % Powered by: Deutz diesel engine Rating: 55 kw at 2500 min -1 Capacity fuel tank: approx. 120 L Separator Prefractionator tank capacity: approx. 2,4 m 3, vaccum resistance: 50 % Dimensions (H x W x L): 2245 x 2300 x 2990 mm Suction connection: 5 inch Air connection: 5 inch Emptying via gate valve. Monitors: electrical level switch and tank full signal Manhole Tank fitted with de-watering pump. Vacuum system Copyright Hammelmann GmbH, Oelde, Germany. Technische Änderungen vorbehalten.

48 Spiderjet H.1 06/15 AQUABLAST SPIDERJET 3000 surface preparation unit. The SPIDERJET 3000 consists of: pneumatic twin wheel drive. electronically monitored vacuum with automatic UHP water shut off Electric-pneumatic precise control unit enabling automatic straight line running winch with safety arrester. air pressure maintenance unit. Optional: air powered winch Standard: two counter balance safety arresters Optional Spiderjet 3000 incl. pneumatic control manual incl. remote control (as discribed below) Portabled operator s panel with radio remote control 230V 50 Hz/60 Hz Power supply Compressed air cold dryer incl. pre-filter Transportation uni Air drier incl. prefilter Performance: 1800 l/min at 16 bar Supply: 230 V / 50 Hz / 900 W Dimension: 480 x 375 x 530 mm Weight: 40 kg Rate of separation: at 35 C 95% at 50 C 50% Elekctrical control cabinet Pneumatic control cabinet Air heater Technical Data Working width: 374 mm Op. pressure: to 3000 bar Flow rate: to 50 l/min. Weight: 105 kg Length: 775 mm Width: 780 mm Conn. thread for HP hose: M 30 x 2 Vacuum: to 0.8 bar dependant upon work surface Suction connection: DN 100 Vacuum rate: 1500 m³/h at 50 % vacuum No. of nozzles: 16 Nozzle type: P Air pressure qty.:min. 29 l/sec. Air pressure: 4 8 bar Air pressure connection: nipple f. ¾ hose Stripping rate: approx. 70 m²/h dependant upon coating quality Movement speed: 6 m/min.

49 Abrasive injection nozzle 13.L.1 10/13 For working on surfaces an abrasive material can be added to the water jet. For use with high pressure water blasting guns SP 1000, SP 1000 ME, SP 400 and high pressure lances Boride carbide nozzle insert Interchangeable water nozzles Universal hose coupling Typical applications Casting polishing Shaping steel components Profiling new metal surface to accept protective coatings Cleaning and shaping steel, stone and concrete surfaces Op. pressure: Working pressure: max bar max. 400 bar Weight: approx. 1,6 kg Length: approx. 200 mm Diameter: approx. 60 mm Connection thread:⅜ inch BSP Recommended op. pressure: bar. Recommended flow rate: approx. 60 l/min Please pay attention to reaction force! Please wear suitable protective clothing!! For nozzle inserts see reverse. Container for abrasives Robust construction, galvanised Stainless steel filling sieve Metering valve with air intake 6 m abrasive suction hose Abrasive volume: Weight, empty: Height: Diameter: Air connection: Hose nozzle Abrasive hose 60 litres 8 kg 880 mm 390 mm 15 mm i/d 19 mm i/d Copyright Hammelmann Maschinenfabrik GmbH, Oelde, Germany. Rights reserved to modify design.

50 Abrasive injection nozzle accessories and spares 13.L.2 10/13 SP 1000 / SP 1000ME SP 400 Item no Item no. Abrasive injection nozzle Accessories Nozzle inserts, design B Fan jet nozzle 15 see chapter 12 O-ring Support ring Spare part Boride carbide nozzle insert Container for abrasives Spare parts Container for abrasives with 6 m hose, items Abrasive container Hose connector Hose connector G½ M30 x 2 (L) * Hose clamp Item no. 60 Hose (per metre) * has to be exchanged for the nipple M22 x 1,5 (included in Pos. 30). Copyright Hammelmann Maschinenfabrik GmbH, Oelde, Germany. Rights reserved to modify design. High pressure water blasting gun Type SP 1000, SP 1000 ME, SP 400 see chapter High pressure lance with retaining nut see chapter O-ring Connecting injector to blasting gun Type SP 1000 / SP 1000 ME direct with high Type SP 400 pressure lance (item 70)

51 Abrasive injection nozzle 13.L.3 10/13 For working on surfaces an abrasive material can be added to the water jet. For use with high pressure water blasting guns SP 3000 E, SP 3000 MB, SP 3000 MBE, SP 3000 E-2H and high pressure lances Boride carbide nozzle insert Interchangeable water nozzles Universal hose coupling Typical applications Roughening of surfaces Profiling new metal surface to accept protective coatings Cleaning stone and concrete surfaces Op. pressure: Weight: Length: Diameter: Connection thread: max bar approx. 2,1 kg approx. 200 mm approx. 60 mm M 14 x 1,5 LH For nozzle inserts see reverse Please pay attention to reaction force! Please wear suitable protective clothing!! Container for abrasives Robust construction, galvanised Stainless steel filling sieve Metering valve with air intake 6 m abrasive suction hose Abrasive volume: Weight, empty: Height: Diameter: Air connection: Hose nozzle Abrasive hose 60 litres 8 kg 880 mm 390 mm 15 mm i/d 19 mm i/d Copyright Hammelmann Maschinenfabrik GmbH, Oelde, Germany. Rights reserved to modify design.

52 Abrasive injection nozzle accessories and spares 13.L.4 10/13 SP 3000 E / SP 3000 E-2H SP 3000 MB / SP 3000 MBE Item no Abrasive injection nozzle Accessories Nozzle inserts, design R Fan jet nozzle 15 Spare part Boride carbide nozzle insert see chapter High pressure water blasting gun Type SP 3000 E, SP 3000 E-2H, SP 3000 MB, SP 3000 MBE UHP Lance see chapter 12 see chapter Item no. Container for abrasives Spare parts Container for abrasives with 6 m hose, items Abrasive container Hose connector Hose connector G½ M30 x 2 (L) * Hose clamp Hose (per metre) * has to be exchanged for the nipple M22 x 1,5 (included in Hammelmann Pos. 30). Postfach 3309 D Oelde Telefon ( ) 76-0 Copyright Hammelmann Maschinenfabrik GmbH, Oelde, Germany. Rights reserved to modify design. Connecting injector to blasting gun Type SP 3000 E, SP 3000 E-2H, direct SP 3000 MB, SP 3000 MBE

53 Thermacon 12.P.1 09/11 for use with fan jet nozzle type R suitable for use with a single nozzle holder or with rotorjets. adjustable temperature/operating pressure combinations. Nozzle assembly Application examples Graffiti removal. Removal of oils, greases and tar based products. Cleaning sensitive surfaces such as sandstone facades. Cleaning machinery and machine parts etc. The Thermacon is installed between the blasting gun and the selected nozzle. Rotorjet without nozzle holder with nozzle holder Type R Op. pressure: max bar Temperature: max. 95 C Flow rate: 25 l/min Length: 179 mm Weight : 0,8 kg Connection thread: Inlet: M 20 x 1,5 (Pressure ring /pressure screw ) Outlet: M 14 x 1,5 LH Accessories (without picture) Nozzle holder Type R Fan jet nozzle Type R Performance examples 1. Inlet temperature 20 C - without engine heat exchanger at inlet at outlet op. pressure: 3000 bar 400 bar water temperature: 20 C 85 C 2. Inlet temperature 40 C with engine heat exchanger at inlet at outlet op. pressure: 3000 bar 700 bar water temperature: 40 C 95 C op. pressure: 2500 bar 700 bar water temperature: 40 C 85 C Copyright Hammelmann Maschinenfabrik GmbH, Oelde, Germany. Rights reserved to modify design.

54 Application engineering Standard Surface blasting Tank cleaning Tube bundle cleaning Pipe and sewer cleaning Water hydraulic Abrasive cutting Hammelmann GmbH Carl-Zeiss-Straße 6-8 Telefon ( ) Oelde Germany Telefax ( )