Price Lists. Saw Blades and Router Bits
|
|
- Roger Kelly
- 5 years ago
- Views:
Transcription
1 2017 Price Lists Saw Blades and Router Bits
2 2 Saw Blades We pride ourselves in the heat treatment of our saw plates. A well heat treated plate makes it possible for a very flat blade. A flat blade cuts better because it vibrates a lot less; therefore, takes less effort for a clean cut. Longer service life is also achieved. Chop Saw 10 60T ATB / CP1060A 10 60T TCG / CP1060T 12 80T ATB CP1280A Combination Saw 10 50T R+ATB / CR T R+ATB CR T R+ATB CR1460 Rip Saw 10 24T Flat / RF T Flat mm 2 keys RF1024K 12 24T Flat RF1224 SAW BLADES // T Flat mm 2 keys RF1224K 12 36T Flat RSM1236F Glue Joint Saw 12 36T TCG GJ1236 Melamine Saw 10 80T Hi ATB / LM T TCG / LM1080TCG T Hi ATB LM1210
3 General Purpose Saw (ATB Grind) 8 40T ATB / HD T ATB / GA T ATB / GA T ATB / GA T ATB / GA T ATB GA T ATB GA T ATB GA T ATB TS mm 96T ATB 3.2mm 2.2mm 30mm GA30096 SAW BLADES // mm 144T ATB 4.8mm 3.6mm 30mm GA T ATB GA T ATB GA T ATB GA T ATB GA T ATB GA T ATB GA1810 General Purpose Saw (TCG Grind) 10 40T TCG / GT T TCG / GT T TCG / GT T TCG GT T TCG GT mm 64T TCG 3.0mm 2.0mm 30mm GT mm 72T TCG 3.2mm 2.2mm 30mm GT mm 96T TCG 3.2mm 2.2mm 30mm GT T TCG GTP1610 Panel Sizing Saw 350mm 72T TCG 4.4mm 3.5mm 30mm PA mm 72T TCG 4.8mm 3.5mm 60mm PA
4 4 Non-Ferrous Saw Carbide tips for these saws are carefully selected for extended life in cutting aluminum, copper, and brass; they are not too brittle and do not fracture easily. Well heat treated flat saw plates is the key to good performance in cutting all grades of aluminum sheets and extrusions. 8 60T TCG / NF T TCG / NF T TCG / NF T TCG / NF T TCG NF T TCG / NF1210P T TCG NF T TCG NF T TCG NF T TCG NF T TCG NF T TCG NF T TCG NF T TCG NF T TCG NF mm 120T TCG 4.4mm 3.6mm 30mm NF50012 Mitre Saw SAW BLADES // T ATB+R / MD T ATB+R / MD T ATB+R / MD1210P T ATB+R MD T ATB+R / MD1410P T ATB+R MD1410 If you are not happy with the quality of your product, don t hesitate to contact us. We will refund your money immediately, no questions asked. We are confident that our products will pass your quality inspection and excel with proper use.
5 Router Bits We guarantee our router bits, or your money back immediately. No questions asked. Hard micrograin carbide tips are specially selected for longer life, yet tough enough that they won t chip easily. You will also find the shanks are precisely ground with minimum variance and are well balanced at high speed. They are made from solid alloy steel and heat treated in a computer controlled system. 45 Chamfer cutting length shank overall ref# part # list price 5/8 1/4 2 1/ CFQ /8 1/2 2 1/ CFH /16 1/2 2 1/ CFH Classic Pattern ROUTER BITS // 2017 radius diameter cutting length shank overall ref # part # list price 3/16 1 1/2 5/8 1/2 2 1/ CPH Core Box (Round Nose) radius diameter cutting length shank overall ref # part # list price 1/8 1/4 1/4 1/4 1 5/8 Na CBQ /4 1/2 3/8 1/4 1 3/4 Na CBQ /8 3/4 5/8 1/2 2 1/8 Na CBH /2 1 3/4 1/2 2 1/4 Na CBH /16 3/8 1/2 1/ RNQ /4 1/2 5/8 1/4 2 1/ RNQ /16 3/8 1 1/2 2 5/ RNH /4 1/2 1 1/4 1/2 2 7/ RNH Cove Bits radius diameter cutting length shank ref # part # list price 1/4 1 1/2 1/ CVQ /8 1 1/4 1/2 1/ CVQ /2 1 1/2 5/8 1/ CVQ /4 1 1/2 1/ CVH /8 1 1/4 1/2 1/ CVH /2 1 1/2 5/8 1/ CVH
6 6 Dovetail Bits angle diameter cutting length shank ref # part # list price 7 3/4 7/8 1/2 D7-750 DV7H /8 3/8 1/4 D9-372 DV9Q /8 3/8 1/2 D9-375 DV9H /2 1/2 1/4 D14-50 DV14Q /2 1/2 1/2 D14-55 DV14H Edge Beading large diam. bead diam. cutting length shank overall ref # part # list price 7/8 1/4 9/16 1/4 2 1/ EBQ /16 5/8 1/4 2 1/ EBQ /16 1/2 3/4 1/4 2 3/ EBQ /8 1/4 9/16 1/2 2 1/ EBH /8 1/8 9/16 1/2 2 1/ EBH /16 5/8 1/2 2 1/ EBH Edge Bevel angle cutting length cutting height shank overall ref # part # list price 7 3/8 3/8 1/4 2 1/ EV7Q /4 1/4 1/ A EV15Q /2 1/2 1/4 2 1/ EV15Q /16 1/2 2 3/ EV15H ROUTER BITS // /16 1/2 1/4 2 1/ EV25Q Flush Trim diameter cutting length shank overall ref # part # list price 3/8 1/2 1/4 2 1/ FLQ /8 1 1/4 2 5/ FLQ /2 1/2 1/4 2 1/ FLQ /2 1 1/4 2 5/ FLQ /8 1 1/2 3 1/8 2404A FLH /2 1/2 1/2 2 3/ FLH /2 1 1/2 3 1/ FLH /2 1 1/2 1/2 3 5/ FLH /2 2 1/ FLH
7 Half Round (Bull Nose) radius opening cut cutting length shank ref # part # list price 3/16 3/8 7/8 1/ HRQ /4 1/2 1 1/ HRQ /4 1/2 1 1/ HRH /8 3/4 1 1/4 1/ HRH MDF Door style diameter overall shank ref # part # list price Bead/Stile 7/8 2 1/2 1/ MDFBEADS Straight/Panel 1 1/2 2 1/2 1/ MDFSTRAP ROUTER BITS // 2017 Mortise Bit diameter cutting length shank overall ref # part # list price 1/2 3/4 1/4 2 1/ MZQ Ogee radius diameter cutting length shank ref # part # list price 5/32 1 1/8 1/2 1/ OGQ /4 1 1/2 5/8 1/ OGQ /32 1 1/8 1/2 1/ OGH /4 1 1/2 5/8 1/ OGH Plunge Roundover radius large diameter small diameter shank overall ref # part # list price 1/4 3/4 3/8 1/4 1 7/ PGQ /8 1 5/16 1/2 2 1/ PGH If you are not happy with the quality of your product, don t hesitate to contact us. We will refund your money immediately, no questions asked. We are confident that our products will pass your quality inspection and excel with proper use. 7
8 8 Round Nose & Core Box radius diameter cutting length shank overall ref # part # list price 1/8 1/4 1/4 1/4 1 5/8 Na CBQ /4 1/2 3/8 1/4 1 3/4 Na CBQ /8 3/4 5/8 1/2 2 1/8 Na CBH /2 1 3/4 1/2 2 1/4 Na CBH /16 3/8 1/2 1/ RNQ /4 1/2 5/8 1/4 2 1/ RNQ /16 3/8 1 1/2 2 5/ RNH /4 1/2 1 1/4 1/2 2 7/ RNH Roundover Bits radius large diameter cutting length shank ref # part # list price 1/4 1 1/2 1/ RVQ /16 1 1/8 1/2 1/ RVQ /8 1 1/4 5/8 1/ RVQ /2 1 1/2 3/4 1/ RVQ /16 7/8 1/2 1/ RVH /4 1 1/2 1/ RVH /16 1 1/8 1/2 1/ RVH /8 1 1/4 5/8 1/ RVH /2 1 1/2 3/4 1/ RVH / / RVH ROUTER BITS // 2017 Rabbeting & Slotting diameter cutting length cutting depth shank ref # part # list price 1 1/2 1/2 1/2 1/ RBQ Rabbet Bits diameter cutting length cutting depth shank ref # part # list price 1 1/4 1/2 3/8 1/ RAQ /4 1/2 3/8 1/ RAH /8 1/2 1/2 1/ RAH Roman Ogee radius diameter cutting length shank ref # part # list price 5/32 1 1/8 9/16 1/ RM
9 Stile & Rail pattern diameter cutting length width shank ref # part # list price Round/Stile 1 5/8 1 1/4 1/2 6001A SRROUNDA Round/Rail 6001B SRROUNDB Ogee/Stile 1 5/8 7/8 3/8 1/2 6002A SROGEEA Ogee/Rail 6002B SROGEEB Traditional/Stile 1 5/8 7/8 3/8 1/2 6005A SRTRADIA Traditional/Rail 6005B SRTRADIB Strait Bits - Single diameter cutting length shank overall ref # part # list price 1/4 3/4 1/4 2 1/ SSQ ROUTER BITS // /2 1 1/4 1/2 2 7/ SSH Template Bits diameter cutting length shank overall ref # part # list price 1/2 1/4 1/4 1 7/ TPQ /2 3/4 1/4 2 1/ TPQ /2 1 1/4 2 1/ TPQ /8 1/4 1/4 1 3/ TPQ /8 1 1/4 2 1/ TPQ /4 1 1/2 2 3/ TPH /8 1 1/ TPH /8 1 1/2 1/2 3 3/ TPH V Groover Bits diameter cutting diameter point length shank overall ref # part number list price 60 1/2 7/16 1/2 2 1/ V6H /8 3/16 1/4 1 1/ V9Q /2 1/4 1/4 1 7/ V9Q /2 1/4 1/ V9H /4 3/8 1/2 2 1/ V9H /2 1/2 2 1/ V9H
10 10 Straight Bits diameter cutting length shank overall ref # part # list price 1/4 1/2 1/ STQ /4 1 1/4 2 1/ STQ1410A /4 1 1/ STQ1410B /16 1 1/4 2 1/ STQ /8 3/4 1/4 2 1/ STQ /8 1 1/4 2 1/ STQ /8 1 1/4 1/4 2 3/ STQ /2 3/4 1/4 2 1/ STQ /2 1 1/4 2 1/ STQ /8 3/4 1/4 2 1/ STQ /4 3/4 1/4 2 1/ STQ /4 1 1/4 2 5/ STQ /4 1/4 2 1/ STQ /16 1 1/2 2 5/ STH /8 3/4 1/2 2 3/ STH /8 1 1/2 2 5/ STH /8 1 1/4 1/2 2 7/ STH /2 1 1/2 2 5/ STH /2 1 1/4 1/2 2 7/ STH /2 1 1/2 1/2 3 1/ STH12112A /2 1 1/2 1/2 4 1/ STH12112B ROUTER BITS // /2 2 1/2 3 1/ STH /2 2 1/2 1/2 4 3/ STH /16 1 1/4 1/ STH /8 1 1/2 2 1/ STH /8 1 1/2 1/ STH /8 2 1/ STH /4 1 1/2 2 3/ STH /4 1 1/2 1/2 3 1/ STH /4 2 1/2 3 5/ STH /8 1 1/4 1/ STH /2 1/ STH /2 3 3/ STH
11 The HCT Difference Heat Treating Processes We pride ourselves on our own in-house heat treating processes that make our saw plates much more stable for better performance and longer life. Quality Control Automatic grinding machines help to maintain close tolerance of carbide tips. In addition, every batch is randomly checked by operators during the grinding process for even better quality control. Consequently, all of our blades consistently show lower variances than the industry standard. 30 years of OEM experience Our router bit factory has 30 years of OEM experience for all major brands in the US market. You will find that our exceptionally balanced solid alloy steel router bits have superior edge quality and lower variance than industry standards. These router bits last longer because they generate less heat during smooth cutting. If you are not happy with the quality of your product, don t hesitate to contact us. We will refund your money immediately, no questions asked. We are confident that our products will pass your quality inspection and excel with proper use.
12 10833 Hillpoint San Antonio, Tx Phone: (210)
max. 1, Ø Plate Kerf Bore Z Hook Ground
11 Multi-rip Saw Blade With Raker 0 0 Ø Plate Kerf Bore Z Z Hook Ground Excellent blade with special rakers for ripping cuts in solid wood, dry or wet. The carbide rakers protect the saw body to guarantee
More informationMOULDING PROFILE CATALOG
MOULDING PROFILE CATALOG Pioneer Millwork, Inc. About Our Company... Since 1991, Pioneer Millwork s philosophy continues to emphasize servicing our customers. We have understood from the beginning that
More informationrouter tooling catalogue
router tooling catalogue 2018 19 Symbols Calibre profile Tool designed to drill blind holes in natural wood, chipboard panels, plywood etc. Tool designed to drill through holes in natural wood, chipboard
More informationCarbide Burrs 1/4 Shank. Burrs & Routers. morsecuttingtools.com. List No Single Cut. List No Double Cut. Cylinder Shape Radius End
Carbide Burrs 1/4 Shank General Purpose Recommended for steel, cast iron, ferrous materials. Offers good stock removal and smooth workpiece finish. For rapid stock removal in tough applications. Design
More informationEnd Mills. Drills. NEW Sizes Series 136 & 138. NEW Metric Sizes Series 135BN, 138B & 138BN
End Mills Drills NEW Sizes Series 136 & 138 NEW Metric Sizes Series 135BN, 138B & 138BN Celebrating 90 Years 1919-2009 Table of Contents Series Page # of Flutes Square End Ball Nose Corner Radius Neck
More informationCarbide Drills When productivity matters - Stub 1. to Long 1
CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill
More informationMortise & Tenon Doors Shaker Designs
Mortise & Tenon Doors Shaker Designs 8.1 Door Index FP-0144 (MORRIS)... FP-0149 (WRIGHT)... FP-0196 (DRYDEN)... FP-1097 (MT. LEBANON)... MRP-0112 (WHITTAKER)... MRP-0139 (MIDTOWN)... MRP-0141 (AMSTERDAM)...
More informationSpecial drills 88 PRECISION TOOLS
SPEIAL DRILLS 02 Special drills Spot weld miller For removing spot welds from sheet metal. Exchangeable and doubleheaded milling crown. Adjustable milling depth with setting screw. No tearing of the sheet
More informationIn Stock superabrasive tooling EXPRESS LINE.
In Stock superabrasive tooling EXPRESS LINE www.abrasive-tech.com INTRODUCTION Welcome to Abrasive Technology s Express Line Catalog This catalog is a listing of standard products that we carry in stock
More information"IMCO" SOLID CARBIDE CUTTING TOOLS - USA
"IMCO" SOLID CARBIDE CUTTING TOOLS - USA 30 RH Helix Slotting Side Milling Side Milling Pocket (Square) (Side Face) (Shoulder) Cavity NO. S 97-1 "IMCO" SOLID CARBIDE END MILLS 4 FLUTE SQUARE END, METRIC
More informationCarbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides -
CARBIDE ENDMILLS Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - Various shank styles to suit your needs
More informationGroovers. TCT Groovers Light Duty 4 Wing. TCT Undercut Groovers 4 Wing. Premier Groovers 93 G407/LDTA
Groovers TCT Undercut Groovers 4 Wing UG TCT Groovers Light Duty 4 Wing G407/LDTA UG10 Groover can be used for fitting fire proof strip. Radiused groovers are made to order. Tips can be rounded over to
More informationDiamond Tools For The Stone and Construction Industry
Diamond Tools For The Stone and Construction Industry Globally competitive "Industrial" & "Professional" grade tools with advanced technology, superior inputs, and world class manufacturing process. DIAMOND
More informationPROMAX. Tools. Feel The Edge. Winning The World Over One Amazing Tool At A Time. Specializing In High Performance Solid Carbide Cutting Tools
PROMAX Tools Feel The Edge Specializing In High Performance Solid Carbide Cutting Tools VAR-A-TECH Winning The World Over One Amazing Tool At A Time SERIES 101 ROUGHER PRO-4 Vol. 1108A SPECIALS High Performance
More informationSURFACE MOUNTED CORNER GUARD
441 Saw Mill River Road, NY 10701 MODEL : 05338 ISSUED: 01/87 10/11 SURFCE MOUNTED CORNER GURD 4-1 4" [108] NOTE: LL DIMS INCH [MM] 48" [1219] 4-1 4" [108] SECTION - ELEVTION Surface Mounted Outside Corner
More informationGU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ
GU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ GU 500 DZ Premium Cobalt Drills The GU 500 DZ drill series from Guhring is designed for the machinist who doesn t want to settle for average results. When carbide
More information10.5 gal. Vertical Oil Lubricated Air Compressor
10.5 gal. Vertical Oil Lubricated Air Compressor Model No. AC1104 Tank volume: 10.5 gal. (40 L) Direct drive Oil-lubricated single cylinder pump for durability and long life triple the pump life of comparable
More informationHSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,
Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks
More informationNo. of Holes. Drill Dia. (in.)
UTTING TOOLS Heavy Duty Dyno Jobber Drill Set 1/16" - 1/2" by 64ths 29 Pc. in metal index Premium high speed steel 135 Self centering split point Use in high temperature alloys, heat treated alloys, cast
More informationSpecializing In High Performance Solid Carbide Cutting Tools
Specializing In High Performance Solid Carbide Cutting Tools High Performance Products For Shops That Seek Productivity SERIES 156 VAR-A-TECH SERIES 101 ROUGHER SERIES 191 PRO-4 Vol. 0213 Series 110 for
More informationCarbide Burrs and Steel Brushes
Carbide Burrs Tungsten Carbide Burrs 288 Steel 305 287 Carbide Burrs Tungsten Carbide Burrs Flexovit tungsten carbide burrs are manufactured on state of the art CNC machines to give high consistency and
More informationEnergy Oil & Gas Automotive. Aviation. Medical. Machining Titanium
Ti MACHINING Energy Oil & Gas Automotive Aviation Medical Machining Titanium TiAl6V4, Grade 5 alloy is the commonly used titanium grade. Some applications include: compressor blades, discs, and rings for
More informationThreading tools to JIS standard
Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating
More informationIndustrial Tooling Corporation Ltd. Product Catalogue Issue 10
Industrial Tooling Corporation Ltd. Product Catalogue Issue 10 Company Profile Company Profile ITC is a round tool specialist. Our objective is simply to provide you, our customer, with the correct cutting
More informationFACTORY & HEAD OFFICE
FACTORY & HEAD OFFICE 761-4 Dohwa-Dong, Nam-Gu, Incheon. KOREA 402-060 TEL : 82-32-864-4578 (REP.) FAX : 82-32-864-4579 E-mail : dongyoungdia@hanmail.net dongyoungdia@yahoo.com admin@dongyoungdiamond.com
More informationDrills Jobber, R40 UNI
Drills Jobber, - offers superior performance - for longer tool life 0955 9.55 133 87 10 D168 0955 0960 9.6 133 87 10 D168 0960 0970 9.7 133 87 10 D168 0970 0980 9.8 133 87 10 D168 0980 0990 9.9 133 87
More informationBridging the gap... R40 UNI SPM DRILLS. with carbide drills. for an on-site demonstration contact Sutton Tools on
Bridging the gap... with carbide drills R40 DRILLS for an on-site demonstration contact Sutton Tools on 1800 335 350 100% Australian Owned The 130 four facet point with a web profile grind combined with
More informationInfo Overview - solid carbide twist drills (I) Drilling Tools
Info Overview - solid carbide twist drills (I) Brand 0 0 0 0 0 0 0 0 Company standard Company standard Company standard Company standard 6539 6539 6539 6539 5 x D Countersink Countersink Article number
More informationDoor Hinges Concealed Hinges
Concealed mortise hinge For installation in wall recesses For flush wooden or metal doors Suitable for DIN left hand and DIN right hand Certified for fire resistant and smoke control doors in compliance
More informationShaping Tools and Power Tool Accessories
Shaping Tools and Power Tool Accessories 1 TABLE OF CONTENTS THE SIMONDS STORY The year was 1832, only 56 years since America s independence. It was in that year that Abel Simonds set up a small workshop
More informationCONTINUOUS FLIGHT AUGERS AND BITS
Mobile Standard Construction and HEX-COR augers have been tested in the field and independently tested in the laboratory and are proven to be equal to or stronger than any other auger in the industry.
More informationPower Equipment
Power Equipment - 445 - Power Equipment T80900 1100w 19m Weldon Shank Auto-Reverse Tapping & Core Drill Machine Fully Mechanical tapping with automatic reversing controlled by crank motion Two-mode gear-box:
More informationHigh-strength structural bolting assemblies for preloading. Part 1: General requirements. Part 2: Suitability test for preloading
1. Scope and field of application Page 1 of 8 This Technical Data Sheet defines the requirements of high-strength bolt and nut assemblies with calibrated preload, HRC System, hexagon and cup head bolts,
More informationCircuit Breaker Lockout, Standard And Double Toggles Breaker, Rohs Compliant LOCKOUT,STD AND DOUBLE BREAKER. RoHS Compliant
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 44957 Lockout, STD and Double Breaker Ideal Catalog Number 44957 Manufacturer Ideal Circuit Breaker Lockout, Standard
More informationAbout Grind-All Supply Ltd.
About Grind-All Supply Ltd. Grind-All Supply Ltd. - Supplying you with top quality carbide burs, diamond-coated burs, air tools, parts, and accessories. Grind-All Supply Ltd. has been providing quality
More information1
www.kawanlama.com www.krisbow.com 1 MANUAL ROTARY MACHINE IM3 TXL Packaging Pantograph IM3 TXL Spindle and spindle motor power Engraving depth Size : 580 x 510 x 280 mm Net weight : 11 kg Gross weight
More informationDrills Manufactured to National Aerospace Standards (NAS)
Drills Manufactured to National Aerospace Standards (NAS) Tool Materials Manufactured from premium grades of HSS and HSS-E materials These substrates provide good hot hardness and therefore good tool life
More informationSA SyStem. NeW. Part-off and grooving system for radial grooving. high positive inserts for aluminium self-clamping blades.
SA SyStem Part-off and grooving system for radial grooving NeW high positive inserts for aluminium self-clamping blades www.arno.de 01/2013 Content Content SA-Monoblock holder... Page 4 9 SA-Blades...
More informationPivot Sets and Components DORMA LM
Pivot Sets and Components DORMA LM Pivot Sets and Components Whatever your pivot requirements, turn to DORMA and put the weight of your door on our pivots. DORMA s commitment to quality is your assurance
More informationTube Installation.
Tube Installation www.elliott-tool.com Tube Installation Table of Contents Page Tube Installation 2 Tube Hole Gauges 4 Tube Sheet Hole Brushes 5 Grooving (Serrating) Tools 6 Tube Auger / End Prep 7 Hand
More informationCOATING SELECTION CHART
On the Cutting Edge... at Whitney Tool! Whitney Tool is recognized as a leading manufacturer of Woodruff style slotting and keyseat milling cutters, as well as Counterbores, Counterbore pilots, T-Slot,
More information5/6 and 7/8 Series T-A Holders
5/6 and 7/8 Series T-A Holders L4 Thread to BSPT & ISO 7-1 G D1 L5 L2 L1 D Helical d Design L3 5/6 Series Flanged Straight Shank Available Ex-Stock Holder Reference Number Holder Morse Taper Per ISO 296
More informationTABLE OF CONTENTS. 1. Preface P: 2 P: Vectors. 3. Summary Table P: 4-5
TABLE OF CONTENTS. Preface 2. Vectors 3. Summary Table 4. METAL a. HSS-G Drill Bits b. HSS-Co Drill Bits c. Bimetal Hole Saws d. TCT Hole Saws P: 2 P: 3 P: 4-5 P: 8 P: 9 P: 0- P: 2 5. CONCRETE a. Multi-Purpose
More informationPRECISION AT A GLANCE: CONTENTS. Company 3-6. Sawing Hogging Edge banding Jointing Profiling
PRECISION AT A GLANCE: CONTENTS. Company 3-6 Sawing 7-38 Hogging 39-48 Edge banding 49-58 Jointing 59-64 Profiling 65-76 Drilling 77-92 Routing 93-112 Clamping systems 113-126 Peripheral products 127-132
More informationPYSTL STAINLESS STEELS TITANIUM PH STEELS. 438 Series. 538 Series. 738 Series. Introduces The NEW. series VARIABLE IND EX PERFORMANCE EDGE
Introduces The NEW PYSTL series 438 Series STAINLESS STEELS 538 Series TITANIUM PH STEELS VARIABLE IND EX PERFORMANCE EDGE 738 Series TREATMENT PREMIUM GRADE CARBIDE COMPLETE RADIU S OFFERING PYSTL 438
More informationMachining Intelligently
ISCAR s Solutions for Manufacturing Turbochargers Machining Intelligently ISCAR HIGH Q LINES www.iscar.com Turbocharger Industries Turbine Housing Compressor Housing Turbine Wheel Bearing Housing In today
More informationSolid Carbide Performance Routers
Solid Carbide Routers Hard Wood Soft Wood MDF Hard Plywood Soft Plywood Composite Wood Laminated Wood Chipboard Manufactured in Manufactured inthe theusa USA Distributed in Distributed inthe theuk UK Solid
More informationTRI TOOL INC. TECHNICAL SPECIFICATION MODEL 636SB LOW PROFILE CLAMSHELL MARCH,1997
TRI TOOL INC. TECHNICAL SPECIFICATION MODEL 636SB LOW PROFILE CLAMSHELL MARCH,1997 MODEL 636SB Low Profile Clamshell Description: The 636SB Low Profile Clamshell is a split-frame pipe lathe for severing
More informationJET FORMING. Brakes Shears Rolls Rotary and Hand Notcher Machines Presses
Brakes....................................... 111 Shears....................................... 114 Rolls........................................ 115 Rotary and Hand Notcher Machines.............. 117
More information-treme thread cutting. New. Swiss-Line. Inch
New TM -treme thread cutting Swiss-ine Inch 2015-2016 Swiss-ine Swiss-ine Swiss style lathes are becoming a popular alternative to large lathes and machining centers in many companies. Carmex is introducing
More informationPOWER RACK AND PINION STEERING INSTALLATION
by Randy Irwin 1955-57 POWER RACK AND PINION STEERING INSTALLATION Randy Irwin - Technical Writer Randy has been involved in the Chevy parts business for over 25 years. He is a wizard at creating, making
More informationTITAN. Tines AERATION CATALOG
TITAN Tines 2009 AERATION CATALOG Available For Fall Aeration Quick Results With The New Titan QuickChange Tine Head. Designed as a two step process, changing tines is a snap. The New Titan QuickChange
More informationDOUBLE LEVER ARM DOUBLE LEVER ARM SINGLE LEVER ARM 5010 SINGLE LEVER ARM
SERIES PRODUCT SELECTION GUIDE The concealed LCN closers feature a modern design for concealment in either the head frame or top rail of the door. This guide is based on the desired mounting of the closer.
More informationABOUT. In 1973 Baertec Machinery took its place in Bursa Industry by producing Aluminium and Pvc & Metal Processing Machinery.
ABOUT US In 1973 Baertec Machinery took its place in Bursa Industry by producing Aluminium and Pvc & Metal Processing Machinery. In 1973 Baertec Machinery took its place in Bursa Industry by producing
More informationMETAL DRILLING. Metal Drilling ENGINEERED FOR CONTROLLED PRECISION AND SPEED 118 SPLIT POINT 118 STANDARD POINT 135 SPLIT POINT TURBOMAX JET POINT
128 METAL DRILLING ENGINEERED FOR CONTROLLED PRECISION AND SPEED The IRWIN line of metal drill bits offers of a solution for every professional application. Each metal drill bit is made of high speed steel
More informationTAPER AND DEBURRING COUNTERSINKERS
TAPER AND DEBURRING OUNTERSINKERS Taper and deburring countersinkers The flutes of the new RUKO highperformance taper and deburring countersinkers are BN ground from the fully hardened material. Because
More informationReamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable
REAMERS Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable the ultimate reference book is here... BLACK BOOK The ultimate reference book:
More informationCATALOG AUTOMOTIVE BRAKE PRODUCTS
2017 CATALOG AUTOMOTIVE BRAKE PRODUCTS BENDIX PREMIUM COPPER-FREE* BRAKE PADS Comprehensive Coverage for Late Model Vehicles 100% Copper-free* Vehicle-Specific Friction Formulas Includes Hardware (Where
More informationNew Tool Ref Length (mm) Body Length (mm)
4 Series T-A olders Thread to BSPT & ISO 7-1 G L5 L4 L2 D1 D L1 Flanged Straight Shank elical Fluted Design L3 Available Ex-Stock GEN3SYS older Reference Number older Flute D L1 L2 L3 L4 L5 D1 G * Drill
More informationAccuTru Thermowells. Dedicated to those organizations that value improved temperature measurement for critical processes
S E N S O R T E C H N O L O G I E S AccuTru Thermowells Dedicated to those organizations that value improved temperature measurement for critical processes Section 5 Index Thermowells Model Page PT-1
More informationCarbon Steel. Pre-hardened Steel. Tempered Steel Die Steel. Coated. Carbide. Alloy. Steel. DMM h6 DC. Dimensions (mm) Stock Cutting diameter
for Exotic s Anti-vibration Type SSEHVL 000W-R Type ing Side Milling Groove Milling Groove Finishing Face Milling Profile Milling Hardened 5 to 55 55 to 60 60 to 65 HRC HRC HRC Carbide Carbon Pre-hardened
More informationAbrasive Wheels Grabber Premium Abrasives. Screw Drivers. Grabber ROCKER Screw Drivers. Item No. G21400 PREMIUM CHOP SAW BLADE
Abrasive Wheels Grabber Premium Abrasives ITEM NO. SIZE RPM G123321MS 12 x 3/32 x 1-in 5,100 1400 14 x 3/32 x 1-in 4,365 G21400 14 x 3/32 x 1-in 4,400 G41204078MS 4.5 x.040 x 7/8-in 13,300 G41211678MS
More informationCONTINUOUS FLIGHT AUGERS AND BITS
CONTINUOUS FLIGHT AUGERS AND BITS Hex-Tube Augers Available in Hole Sizes 2½ (6 mm) through 12 (05 mm) Hex Sized 1 / 16, 1 1 / 8, 1 5 / 8 and 2 (20.6 mm, 29 mm, 1 mm and 50.8 mm) Field replacement shank
More informationAir Finishing Tools CP778. Heavy Duty Hi-Speed Sander
Air Finishing Tools Finishing work provides a wide range of challenges and we have a complete line of sanders, buffers and polishers for every application from heavy material removal to fine finishing.
More informationROFU TJ 152-A. Y ALE SECURITY GROUP 50BC Series Door Closer. 50BC Series Door Closers. Sizing Chart for Installations. Ordering Information
ROFU 50BC Series Door Closers Specifications U.L. Listing All Yale 50 Series Door Closers with non-hold-open arms are listed by Underwriters Laboratories, Inc. for use on labeled fire doors. Tri-Pack Closer
More informationFor the Professional/Contractor Flap Discs for Angle Grinders
Flap Discs for Angle Grinders Vortec Abrasive Pro Coated Abrasive Flap Discs save both time and money! No need to switch from a Type 27 grinding wheel to a resin fiber disc because flap discs grind and
More informationChevrolet 3100 IFS Kit
1947-54 Chevrolet 3100 IFS Kit Congratulations on your purchase on what we believe is the finest IFS kit available for 1947-54 Chevrolet pickups with stock frames. We have invested many hours into designing
More informationPARTS LIST: 8581 DODGE LONG ARM BRACKETS 03-13
SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397 8580 03-12 DODGE 2500/3500 4X4, 06-08 1500 MEGACAB 4X4 LONG ARM SUSPENSION KIT V3.0 GENERAL NOTES: These instructions are also available
More informationWILTON SAWING. Horizontal Bandsaw s Vertical Bandsaws Cold Saws Cold Saw Blades Accessories... 32
Horizontal Bandsaw s........................... 18 Vertical Bandsaws.............................. 24 Cold Saws.................................... 27 Cold Saw Blades............................... 31
More informationGrooving Tool Holders GND Type
TOOLING NEWS E-112 P M K N S H Tool Holders Expansion 6 s of Chipbreakers Characteristics Wide range of application processes Applicable for grooving, turning, copying, facing, boring and cut-off. Achieving
More informationWood- and board material. Plastic. Composite. Aluminium. CNC milling tools.
Wood- and board material Plastic Composite Aluminium CNC milling tools INTRODUCTION JHV Tools produce solid shank cutters for working of all materials. JHV Tools has particularly specialized in producing
More informationUniversal milling tools Favora. passion for precision
Universal milling tools Favora passion for precision ToolService in Willich, Germany FRAISA thanks to tool reconditioning and material recycling www.bluecompetence.net End milling tools for
More informationNVS The new standard in universal machining
passion for precision NVS The new standard in universal machining [ 1 ] NB-NVS cylindrical mills The new standard in universal machining [ 2 ] With its NB-NVS mills, FRAISA is launching a new standard
More informationMICHIGAN PNEUMATIC TOOL
MICHIGAN PNEUMATIC TOOL Industrial Air Tools Grinders 2016 Serving All Industries Petro Chemical Aircraft Assembly Foundry Rental 1-800-521-8104 www.michiganpneumatic.com MATERIAL REMOVAL Right Angle Grinders
More informationGO LEAN, THINK GREEN
MANUFACTURERS ALLIANCE GROUP, INC. MINIMUM QUANTITY LUBRICATION & ORGANIC LUBRICANTS *SERVING THE INDUSTRY FOR OVER 20 YEARS* GO LEAN, THINK GREEN 1-800-441-2023 www.maglube.com info@maglube.com Why Micro-Lubrication
More informationCOMPETENCE IN PRECISION AND QUALITY HOLE SAWS
COMPETENCE IN PRECISION AND QUALITY HOLE SAWS Tungsten carbide hole saws, shallow cut Cutting edges: tungsten carbide Material thickness: up to 4 Cutting depth: up to max. 10 Cutting angle: works standard
More informationPCD REAMER PCD Reamers Catalogue. Wuxi Sundi Precision Tools Co.,Ltd. Content. Tel:
PCD REAMER 2016-2017 PCD Reamers Catalogue Email: info@sudicuttingtools.com Overview PCD Reamer Production Performance Content E1 E2 E3-E5 E5 E Tel: 0086-0510-88207357 Fax:0086-0510-88207362 Quality Control
More informationHigh-performance milling cutter NX-NVD NEW
High-performance milling cutter NX-NVD NEW Universal high performance with a double groove and variable helix [ 2 ] The NX-NVD high-performance milling cutter with patented double groove geometry and variable
More information$1.00 FOR THE TQIO/RCIO
$1.00 FOR THE TQIO/RCIO m mm HDBBYSHOP Champion Jay Halsey has an impressive track record. One of Jay's advantages is a whisper smooth tranny thanks to his dad, Jim. Now you can build a Halsey transmission!
More informationONSITE OFFERS FREE CAP WITH BOTTLE OPENER! APRIL JUNE PROMOTIONS NEW PRODUCTS WITH EVERY ITEM PURCHASED OVER $99
FREE CAP WITH BOTTLE OPENER! WITH EVERY ITEM PURCHASED OVER 99 ONSITE OFFERS APRIL JUNE 2013 PROMOTIONS NEW PRODUCTS 3 1 30 *CONDITIONS APPLY YEAR LIMITED WARRANTY* YEAR FREE SERVICE CONTRACT DAY NO RISK
More informationMultiCam Classic Series CNC Router Feature and Specification Guide. High-Performance CNC Routing at an Entry-Level Price
MultiCam Classic Series CNC Router Feature and Specification Guide High-Performance CNC Routing at an Entry-Level Price MultiCam accepted the industry challenge to build a rigid, reliable CNC cutting machine
More informationD-1610/D-1611 SERIES: DOOR CLOSERS. D-1610/D-1611 Series. Door Closers. Trusted experts. Proven reliability. Simply STANLEY.
D-1610/D-1611 SERIES: DOOR CLOSERS D-1610/D-1611 Series Door Closers Trusted experts. Proven reliability. Simply STANLEY. TABLE OF CONTENTS General Information...2, 3 Standard Application...4 Parallel
More informationSAWBLADES SPINDLE TOOLING
EICATE WEBSITE Trend have created a website for our range of industrial tooling especially for the manufacturing industry. This website offers full product details on our Sawblades, Spindle Tooling, rilling
More informationDIY (Personal Use Only)
1 DRILL ELECTRIC DRILL and IMPACT DRILL Standard Accessories KW0700026: 1pc Impact Drill 5pcs Masonry Drills 9pcs Twist Drills KW0700026 KW0701000 KW0701002 KW0701001 5pcs Grinding Stones 1pc Case KW0700026
More informationExpanded Options for the MM GRIT 28.. Grooving and Chamfering Milling Heads
Page 1 / 5 MM GRIT 28K-45A MM GRIT 28K-75-6T10 MM GRIT 28K-60-6T10 MM GRIT 28K-45-6T10 Expanded Options for the MM GRIT 28.. Grooving and Chamfering Milling Heads Page 2 / 5 Highlights Following market
More informationTHE CLEAR PATH TO SUCCESS BEGINS WITH PARTNERSHIPS.
SMART SOLUTION THE CLEAR PATH TO SUCCESS BEGINS WITH PARTNERSHIPS. Every day, businesses find clearer paths to success by partnering with Weiler. Together, we can evaluate your operation, identify opportunities
More informationSPECIFICATIONS Power input (W) No load speed (rpm) Hammer rate (under load) Drilling concrete / steel / wood 24 / 13 / 30 mm
BH 24 IE 24 MM SDS-Plus Rotary Hammer Powerful 800 watt motor 24 mm drilling capacity in concrete Safety clutch for user protection Variable speed electronics for control Hammer action stop for drilling
More informationGSP - High Tech Saws. GSP - High Tech Saws, s.r.o. Hlavní 51, Zborovice CZECH REPUBLIC. saw blades knives cutters
GSP - High Tech Saws GSP - High Tech Saws, s.r.o. Hlavní 51, 768 32 Zborovice CZECH REPUBLIC saw blades knives cutters GSP - High Tech Saws, s.r.o., resident in Zborovice, is a traditional cutting tools
More informationPRODUCT INFORMATION. Real High-End Features - True Audiophile Sound - Affordable Price. Walnut finish: High-Gloss Black and White:
X1 Our next generation of the legendary X-Line. Real High-End Features - True Audiophile Sound - Affordable Price n/c MSRP 699 (incl. VAT) Pick it S2MM MSRP 799 (incl. VAT) Speed control with electronic
More informationINDUSTRIAL ROUTING CUTTING TOOLS
CUTTING TOOLS Technical Information UpCut, DownCut, Compression. What are the pros and cons of each of these chip flow styles? Below highlights some of the key considerations that should be taken into
More informationSturdiSignal Series. Low Profile LED Warning Signal Light. Specifications. Dimensions. Compliances
Low Profile LED Warning Signal Light Economic yet durable design For use on container, bulk and intermodal equipment Higher durability than traditional strobe lights requiring no bulb replacement LED technology
More informationSolid carbide Twist Drills Overview
Solid carbide Twist Drills Overview Manufacturer ß 000000000000 DIN similar to 899 338 338 338 6539 6539 6539 6539 6539 6539 6539 6539 6539 Counters.cut.Counters.cut. 3 x D 3 x D 3 x D, IKZ 3 x D, IKZ
More informationTungsten Carbide Rotary Burrs.
Tungsten Carbide Rotary Burrs www.morrisflex.co.uk Introduction groupuk Morrisflex is an internationally renowned brand of high quality carbide burrs and forms a key part of ATA Group, a privately owned
More informationAn ASSA ABLOY Group brand Series. Architectural Door Closer
An ASSA ABLOY Group brand 3000 Series Architectural Door the perfect choice The Yale 3000 Series Architectural Door s offer the perfect combination of reliability, appearance and durability in today s
More informationE3 Architecture WINDERMERE PROJECT TECHNICAL GUIDE J SWINGING TERRACE & FRENCH TERRACE DOORS
E3 Architecture WINDERMERE PROJECT TECHNICAL GUIDE J SWINGING TERRACE & FRENCH TERRACE DOORS PRODUCT FEATURES SPECIFICATIONS STYLES Traditional, French, Camber Top, Quarter Round and Full Radius options.
More informationCUTTING TOOLS 5/64 27/64 3/32 7/16 7/64 29/64 1/8 15/32 9/64 31/64 5/32 1/2 11/64 3/16 3/16 13/64 13/64 7/32 7/32 15/64 15/64 1/4 1/4 17/64 17/64 9/32
JOBBER LENGTH NITRO DRILL BITS 135 SPLIT POINT MADE IN USA 10601 1/16 10623 13/32 10602 5/64 10624 27/64 10603 3/32 10625 10604 7/64 10626 29/64 10605 1/8 10627 15/32 10606 9/64 10628 31/64 10607 5/32
More informationthe pearl maxidisc system
Distributed by: BEST MATERIALS Ph: 800-474-7570, 602-272-8128 Fax: 602-272-8014 www.bestmaterials.com Email: Sales@BestMaterials.com the pearl maxidisc system CHOOSE THE MAXIDISC THAT IS RIGHT FOR YOU!
More informationCnC woodworking Collets
CnC woodworking Collets SE00- SE0- SE0 Nut SyoZ 0 FoR woodworking MAChIneS (RDo0) This collet used on.hp and HP dual end Perske motors Description Length Inside SE00-0mm SYOZ 0 mm Collet 0 mm SE00- SYOZ
More informationSpecial Product Catalogue. T-A Drill Insert System
Special Product Catalogue T-A Drill Insert System T-A Special Products - Application Example Automotive Cylinder Head Application - Cylinder Head Water Jacket Holes Application - Cylinder Head Water Jacket
More informationhole saws 260 PRECISION TOOLS
HOLE SAWS hole saws G hole saws The new RUKO hssg hole saws can be used in hand and pillar drills. When employing pillar drills, use manual advance only. Suitable for steel (up to 800 N/²) and cast steel,
More information