An ASSA ABLOY Group brand Series. Architectural Door Closer

Size: px
Start display at page:

Download "An ASSA ABLOY Group brand Series. Architectural Door Closer"

Transcription

1 An ASSA ABLOY Group brand 3000 Series Architectural Door

2 the perfect choice The Yale 3000 Series Architectural Door s offer the perfect combination of reliability, appearance and durability in today s market. With features such as staked valves, self-drilling/self-tapping screws, rack and pinion design and precise valve adjustment, and a complete range of arm and cover options, the Yale 3000 can meet virtually any application challenge. This U.L. listed, ANSI Grade 1 closer has a long history of proven quality. It is the ideal choice for upscale facilities that demand superior performance such as: conference centers, office buildings, courthouses, religious facilities, banks, nursing homes, restaurants, hotels and medical offices. finishes Product will be painted with a combination of waterborne acrylic and polyester powder coat. s will withstand 100 hours of salt spray. (The ANSI requirement is 25 hours.) contents Introduction... 2 Overview... 3 Features Optional Features... 6 Applications Technical Details Accessories Parts List Suggested Specifications How To Order Sprayed Finishes Description Specify Designation (BHMA) Complements the following finishes Old Designation Aluminum , 628, 629, 630, 651, 652 SB Statuary Bronze , 640, 695 STAT Dull Bronze , 637, 639 BL Black Medium Amber Gold , 606, 632, 633 GB Prime Coat 600* SRI * 600 is a special rust inhibiting prime coast. s can be ordered prime coat only (specify closer x 600). An additional charge applies if finish coat is required over prime coat (ex: 3501 x 600 x 689). d Finishes* Old Designation Bright Brass 605E Yes Yes US3 Satin Brass 606E Yes Yes US4 Bright Bronze 611E Yes Yes US9 Satin Bronze 612E Yes Yes US10 Oxidized Oil Rubbed Bronze 613E Yes Yes US10B Bright Chrome 625E Yes Yes US26 Satin Chrome 626E Yes Yes US26D * When a plated finish is ordered, arm and cover will be plated unless cover only is specified. 3100/ available with plated arm only. 2

3 overview Cutaway View Spring Power Adjustment Shaft Aluminum Alloy Shell Piston Latch Speed Regulating Valve Sweep Speed Regulating Valve End-View Backcheck Intensity Regulating Valve Pinion Optional: DL Delayed Action Closing Regulating Valve Latch Speed Regulating Valve Sweep Speed Regulating Valve CAUTION: Door s for Low Opening Force Applications: Door closers installed in openings required to meet the requirements of The Americans with Disabilities Act or ANSI Standard A117.1, when adjusted to meet those requirements, may not provide adequate closing power to dependably close and latch the door. compliance standards Series 3301 and 3501 door closers are designed to comply with requirements of the Americans with Disabilities Act (A.D.A.) and ANSI standard A All series 3300/3500, 3301/3501 are ANSI/BHMA A156.4 Grade 1 certified. All Yale series 3300/3500, 3301/3501 closers with non-hold open arms are listed by Underwriters Laboratories for labeled fire doors. This includes compliance to UL10C for 3-hour assemblies. The product is manufactured in an ISO 9001 facility. These closers are also listed with the New York City Materials and Equipment Acceptance Division. standard on all 3000 series closers Features Cast aluminum body Non-handed Staked valves Rack & pinion design 1-1/4" (32mm) diameter piston 5/8" (16mm) diameter pinion journals Separate and independent, latch, sweep and backcheck intensity valves 2-1/8" (54mm) projection (standard covers) All standard arm applications (with slim, full or metal covers) allow doors to swing 180 degrees, conditions permitting 3300/ shipped with slimline plastic cover 3500/ shipped with full cover 10-year limited warranty Optional Features and architectural covers (3500 or 3501 only) Heavy-duty arms: Regular Rigid, Parallel Rigid, Holder/Stop, Holder/Stop Spring, UNI Stop Delayed action Slide tracks (push or pull side mounting) Lead-lined metal cover (suffix MLL) Additional Features Sized springs 2, 3, 4, 5, 6 with 50% additional adjustment Adjustable spring sizes 1 through 6 Bi-packed (regular arm and top jamb mounting) Tri-packed (regular arm, top jamb and parallel arm mounting) X X X X X X X X 3

4 fasteners/features Arm Type Description RA PA TJ Low Profile PR Holder/Stop, Holder/Stop Spring UNI UNI-J Slide Track DOOR SDST Self Drilling Self Tapping S S S S S S S S S MS Machine Screw S S S S S S S S S SN Sleeve Nut O O O O S S S S S TBGN Through-Bolts & Grommet Nuts O O O O O O O O O SMS Sheet Screws O O O O O O O O O Torx Torx Drive Security Screw O O O O O O O O O FRAME SDST Self Drilling Self Tapping S S S S S S S S S MS Machine Screw S S S S S S S S S SMS Sheet Screws O O O O O O O O O Torx Torx Drive Security Screw O O O O O O O O O S = standard; O = optional SN are for use on unreinforced hollow metal doors or to prevent any hollow metal door from collapse/dimpling. They can also be used for thru bolting on wood doors. SN are supplied for 1-3/4" (44mm) thick doors unless specified for 2-1/4" (57mm) thick doors. TBGN are an alternative to SN for wood doors. TBGN are supplied standard for 1-3/4" (44mm) thick doors. They can be specified for 1-3/8" (35mm) thick doors. SMS - when specified, closer will be packed with sheet metal screws for the door AND sheet metal screws plus machine screws for the frame. TORX screws with security pin are standard with Security Door s. Torx may be specified for all other series applications. Torx are only available with machine screw threads. Sheet metal screw threads or wood screw threads are not available. Note: To order special fasteners with closers, specify model number x fastener (Ex: 3501 x 689 x TBGN) features Aluminum Alloy Housing bodies are constructed of a special aluminum alloy, carefully selected to accommodate interactive steel components and operating conditions. Rack & Pinion Operation Provides a smooth constant control of the door through its full opening and closing cycle. 180 door swing can be achieved when door, frame, hardware and arm function do not interfere. Non-handed With few exceptions all series 3300/3500 and series 3301/3501 door closers are non-handed and can be installed on either right or left hand swing doors. Pinion shaft extends vertically through the closer body in both directions. Some options, as noted on page 5, will require that the hand of the closer be specified. Sweep Speed Control Valve Allows adjustment of door speed from the door's full open position down to approximately 10 from the closed position. Latch Speed Control Valve Allows adjustment of door speed from approximately 10 down to the door s fully closed position. Fluid All door closers are supplied with a temperature stable, multi-viscosity fluid. This fluid will permit the door closer to perform within a wide temperature range: from very high to as low as -40 F. Tri-Packed 3301/3501 come with screws, brackets and soffit plates to allow for regular, top jamb, and parallel arm installations. Adjustable Backcheck Valve Provides control of the door in the opening cycle, beginning at approximately 75 of door opening. It cushions the door opening when the door is forcibly opened beyond its pre-adjusted limits. Standard Molded s Molded of high-impact U.L. listed material. Standard covers are non-handed for all applications. See page 5 for optional covers. Warranty Limited ten-year warranty for defects and life of the building on the aluminum housing. 4

5 features (cont.) door closer power options Series 3300/3500 Sized Door Available in five different power sizes (2, 3, 4, 5 or 6). Each power size is adjustable up to 50% stronger than the minimum closing force for that size, as outlined in ANSI/BHMA standard A Series 3301/3501 Multi-Sized Door Adjustable through the power range of sizes 1 through 6, as outlined in ANSI/BHMA specification A The series 3000 also conforms to the minimum opening force requirements of the Americans with Disabilities Act (A.D.A) and ANSI/BHMA standard A117.1 for interior doors. optional covers Optional This steel cover is non-handed for regular and parallel arm applications, but is handed for top jamb applications. is available in sprayed or plated finishes. Optional Architectural s* : Architectural plastic covers are molded of high-impact U.L. listed material. They are non-handed and available in sprayed finishes. : The architectural metal covers are steel and non-handed for all applications. These covers are available in sprayed or plated finishes. * For Parallel Arm Applications Consult factory for doors swinging more than 120 Optional ABS Consult factory for details. 5

6 optional features delayed action Adjustable Delayed Action Closing An optional hydraulic feature that adds a third speed range to the closing cycle. This feature becomes effective when the door is opened and released at any point beyond 70. The amount of time delay depends upon the combination of the angle of door release and valve adjustment. The valve can be adjusted with a 1/8" (3mm) hex key from no delay time up to maximum delay times of: Door Opened and Released at Approximate Time of Delay Cycle minutes minutes seconds Pressure Relief Safety Valve The delayed action hydraulic system contains a pressure relief valve. Any time the door is forced toward the closed direction while it is in the closing cycle, the valve will open and permit the door to close. This prevents damage to door, frame and closer. arms Non-Hold Open Self-closes door every time door is opened. Auxiliary stop (by others) required except when using the Holder/ Stop, Holder/Stop Spring or UNI Stop arms. Suggested Applications Delayed Action closing allows slow-moving traffic to clear the opening before the door closer s normal closing cycle begins. This feature can be helpful in health care facilities such as hospitals and nursing homes. It provides sufficient time for persons on crutches or in wheelchairs to pass through a door without concern of it closing. At the same time, it can accommodate the facility's staff with movement of food service carts, beds, and other wheeled traffic. Use of delayed action closers on many doors throughout industrial and commercial buildings can also assist the flow of traffic. Locations where additional time to clear the opening is advantageous are doors between office and factory/ warehouse facilities, doors to workshops or laboratories, kitchens and food processing areas. Hold Open Achieved by means of friction or ball and detent/ roller. Friction hold open has a range of 90 to 180 using template location and mechanical adjustment. Ball and detent or roller hold open is effective in a range of 85 to 110. Door Opening Degrees Hold open arm door closers are not permitted to be used on fire door assemblies. Arm Function Regular Arm, Top Jamb, Parallel Arm Parallel Rigid Arm Holder/Stop Parallel Arm Holder/ Stop Spring Parallel Arm UNI Stop Parallel Arm UNI Stop Top Jamb Low Profile Slide Track Non-Hold Open to to to to to 110 /180 Hold Open 90 to to to to to to 110 N/A 85 to 110 3=180 trim and template permitting 6

7 applications Regular Arm 3301 This is the only pull side application where a double lever arm is used. It is the most power-efficient application for a door closer. Sufficient frame, door and/or ceiling clearance must be considered Since the arm assembly projects directly out from the frame, this application may present an aesthetics issue or be prone to vandalism. Top Jamb 3301 For efficiency reasons this application provides the best alternative to the regular arm application. There must be sufficient frame face and/or ceiling clearance for this application. It requires a top rail on the door of just 2-1/4" (57mm). This application provides the best door control for doors in exterior walls that swing out of a building The entire door closer and arm assembly project from the frame, similar to the regular arm application, where matters of appearance and malicious abuse can be of concern. Consideration must be given to depth of reveal. Parallel Arm 3301 This application provides the most appealing design appearance for a surface-mounted door closer having a double lever arm. This also makes it beneficial in vandalism-prone areas. It is on the push side of the door and the arm assembly extends almost parallel to the door. In the closed position, there is very little or no hardware projecting beyond the frame face in most situations Due to the geometry of the arm it is approximately 25% less power-efficient than a regular arm application. The entire closer and arm assembly are mounted below the frame stop. Top rail clearance dimensions will vary based on the type of cover used. (See page 13.) 7

8 applications Parallel Rigid Arm An enhanced variation of the standard parallel arm assembly that is intended for use in heavy traffic areas where auxiliary door stops are installed. Hold open available specify hand when ordering. Non-hold open arm shown Hold open arm shown Holder/Stop Arm Similar to the Parallel Rigid arm, this arm incorporates a stop at the arm s soffit plate to dead stop the door at a predetermined degree of door swing between 85 and 110, in 5 increments. Prior to dead stop the door closer s backcheck feature slows the door speed to reduce the impact of the stop action. The Holder/Stop arm is intended for use where an auxiliary door stop cannot be utilized and no more than moderate abuse is anticipated. Where more extreme conditions are expected, use of a UNI Stop arm is recommended. Available with or without hold open. (Hold open strength is adjustable.) Holder/Stop Spring Arm This arm has all the characteristics of the Holder/Stop arm with an additional steel buffer spring that providesgreater protection at the end of the door opening cycle. For extreme conditions, use of a UNI Stop arm is recommended. Available with or without hold open. Regular Rigid Heavy-Duty Arm This double lever arm features a non-adjustable secondary arm. Orbitally riveted joints prevent tampering or disassembly. Prefix "R" to model number. Available non-hold open only. 8

9 applications UNI Stop Arm Parallel Top Jamb Can be used for either parallel arm or top jamb applications. UNI Stop arms combine the features of a double lever arm overhead door stop/holder with the backcheck feature of the door closer to reduce door stopping shock loads to a minimum. This arm uses a compression spring buffer at the soffit plate/arm shoe that absorbs 30 lbf. of force, 5 prior to the door s dead stop. The UNI Stop arm, coupled with the door closer's backcheck feature, proves the most controlled stop available with a surface door closer. For parallel arm applications there are three different length arm assemblies. Each length is designed for a specific range of door widths, to provide precise door control. This further lessens the dead stop impact on the door s hinges/pivots. Pull side Slide Track Whether pull or push side mounted, slide track provides the designer with the smoothest lines available in a surface-mounted door closer. The single lever arm allows components to be located in a stack configuration to minimize projection and eliminate obtrusive arm angles. The arm geometry reduces door closer power efficiency by approximately 25% from that of a regular arm. Push side Standard unit: Adjustable (hold open and non-hold open). Track is supplied with a spring buffered stop. An auxiliary stop, by others, is required. Specify if hold open unit is required. 180 swing (non-hold open, pull side only) is also available. This track assembly requires that a door stop, by others, be supplied to stop the door. Regular Arm Allows closer to be installed where there is as little as 1" (25mm) of frame face ceiling clearance Parallel Arm Allows closer to be installed 1/2" (13mm) higher up on door than standard parallel arm application. Low Profile Arm Supplied with 3380/3580, 3381/3581 series door closers for non-hold open installations only. Low profile arms have a reduced height elbow joint and a straight main arm. This enables the door closer to be installed in less vertical space. Note: Low profile arm door closers are not supplied tri-packed. 9

10 technical details regular arm C L Hinge B E C Full K Mounting holes for closer body are spaced 3/4" (19mm) vertically x 12" (305mm) horizontally. Note: All measurements are Inches/mm. Maximum 180º door swing, conditions permitting Series s E Minimum Ceiling Clearance NHO Low Profile HO B Minimum Top Rail W/O W/3146 NHO/ HO Low Profile NHO/ HO Low Profile H A Minimum Top Rail Clearance NHO/ HO Low Profile 2-1/8"* (54mm) C Template Position for 100 Door Opening K Length A H Height 3100 No 7-1/8" (181) 3300 Slim Line 3-1/2" 3-3/8" (89) (86) 7" 3500 Full (178) 3500M 3500A 3500MA 1-1/2" (38) 1" (25) 1-5/8" (41) 2-1/2" (64) 2-3/8" (60) 1-5/8" (41) 1-1/2" (38) 4-1/4" (108) 3-5/8" (92) 3-1/2" (89) 4-1/8" (105) 6-3/4" (171) 3-1/2" (89) 6-1/2" 3-3/8" (165) (86) 12-3/4" (324) 13" (330) 13-5/8" (346) 14" (356) 2-7/8" (73) 3-3/4" (95) 3-1/8" (79) 3" (76) Door Widths Inches (cm) Sized s Model Numbers Multi-Sized s Interior Exterior Non-Hold Open Hold Open Non-Hold Open Hold Open 30" (76) N/A 3302, , " (91) 30" (76) 3303, , " (122) 36" (91) 3304, , 3514 N/A 48" (122) 3305, , 3515 Unusual 3306, , Note: 3301/3501 series door closers are set at midpower range from the factory and can be adjusted for door sizes noted above. * Projection is for Slim Line or Full s. Projection for s = 2-3/16" (56mm). Projection for Architectural & Architectural s = 2-1/4" (57mm). 10

11 technical details top jamb arm C C L Hinge K Full 2-1/8"* (54mm) F H Reveal E A Mounting holes for closer body are spaced 3/4" (19mm) vertically x 12" (305mm) horizontally. Note: All measurements are Inches/mm. Series s F Minimum Frame Face E Minimum Ceiling Clearance A Minimum Top Rail Clearance W/O W/3146 With 3148/3547 C Template Position for 100 Door Opening K Length H Height W/O With 3146 With 3148, 3158, 3547 & 3547A s W/O With 3146 With 3148, 3158, 3547 & 3547A s NHO Low Profile HO NHO Low Profile HO NHO Low Profile HO 3100 No 7-1/8" (181) 12-3/4" (324) M Slim Line Full 1-3/4" (44) 1-1/8" (29) 1-1/2" (38) 1-5/8" (41) 2-3/4" (70) 3-3/4" (95) 1-5/8" (41) 1-1/2" (38) 1-5/8" (41) 2-1/4" (57) N/A 2-1/2" (64) 3-3/8" (86) 2-3/4" (70) 3-5/8" (92) 4-3/8" (111) 3-3/4" (95) 4-5/8" (117) 7" (178) 6-3/4" (171) 13" (330) 13-5/8" (346) 2-7/8" (73) 3-3/4" (95) 3500A 3500MA N/A 1-1/2" (38) 3" (76) 2-7/8" (73) N/A 1-1/2" (38) 6-1/2" (165) 14" (356) 3-1/8" (79) 3" (76) Note: Reveal range information is based upon 1-3/4" (44mm) doors hung on 4-1/2" wide hinges. * Projection is for Slim Line or Full s. Projection for s = 2-3/16" (56mm). Projection for Architectural & Architectural s = 2-1/4" (57mm). 11

12 technical details top jamb arm Door Widths Inches (cm) Sized s Model Number Multi-Sized s Interior Exterior Non-Hold Open Hold Open Non-Hold Open Hold Open 30" (76) N/A TJ3302, TJ3502 TJ3312, TJ " (91) 30" (76) TJ3303, TJ3503 TJ3313, TJ " (122) 36" (91) TJ3304, TJ3504 TJ3314, TJ3514 N/A 48" (122) TJ3305, TJ3505 TJ3315, TJ3515 Unusual TJ3306, TJ3506 TJ3316, TJ Note: 3301/3501 series door closers are set at midpower range from the factory and can be adjusted for door sizes noted above. Reveal Information Sized s Reveal Range Inches (mm) Maximum Door Opening NHO Hold Open TJ /4" (70) to 7" (178) 150 TJ /4" (70) to 6-3/4" (171) 150 Multi-Sized s TJ3301, TJ /4" (70) to 4-1/4" (108) 180 TJ3301, TJ /4" (108) to 7" (178) 150 TJ3311, TJ /8" (54) to 4-1/4" (108) 180 TJ3311, TJ /4" (108) to 6-3/4" (171) 150 Sized s Reveal Information (regular arm installed top jamb) Reveal Range Inches (mm) Maximum Door Opening NHO Hold Open to 2-7/8" (73) w/ ** 0 to 2-3/4" (70) to 2-3/4" (70) 180 Multi-Sized s 3301, to 2-7/8" (73) , 3501 w/ 0 to 2-3/4" (70) , to 2-3/4" (70) 180 ** 3146, 3148, 3158, 3547 or 3547A Note: Reveal range information is based upon 1-3/4" (44mm) doors hung on 4-1/2" wide hinges. 12

13 technical details parallel arm 5/8" (16mm) Ref. B H A C Full K D Mounting holes for closer body are spaced 3/4" (19mm) vertically x 12" (305mm) horizontally. Note: All measurements are Inches/mm. Maximum 180º door swing, conditions permitting. 2-1/8"* (54mm) Series s NHO 5-1/4" (133) B Minimum Top Rail 5/8" (16mm) Frame Stop W/O With 3148/3548 Low Profile 4-5/8" (117) HO NHO Low Profile 5-1/4" (133) 3" (76) 2-3/8" (60) A Top Rail Clearance HO NHO Low Profile 3" (76) HO C Template Position for 120 Door Opening 3-3/8" 3100 No (86) Slim Line 6-1/4" 5-5/8" 6-1/4" 3300 (159) (143) (159) 3-1/4" (83) 3500 Full 3500M 3500A 3500MA 6-7/8" (175) 6" (152) 5-7/8" (149) 6-1/4" (159) 5-3/8" (137) 5-1/4" (133) 6-7/8" (175) 3" (76) 6" (152) 2-3/4"^ 5-7/8" (70) (149) K Length 12-3/4" (324) 13" (330) 13-5/8" (346) 14" (356) H Height 2-7/8" (73) 3-3/4" (95) 3-1/8" (79) 3" (76) D Arm Extension 8-1/8" (206) 8" (203) 7-5/8" (194) ^Not available for doors that swing to 180. Door Widths Inches (cm) Sized s Model Number Multi-Sized s Interior Exterior Non-Hold Open Hold Open Non-Hold Open Hold Open 30" (76) N/A PA3302, PA3502 PA3312, PA " (91) 30" (76) PA3303, PA3503 PA3313, PA " (107) 36" (91) PA3304, PA3504 PA3314, PA " (122) 42" (107) PA3305, PA3505 PA3315, PA3515 N/A 48" (122) PA3306, PA3506 PA3316, PA Note: 3301/3501 series door closers are set at midpower range from the factory and can be adjusted for door sizes noted above. * Projection is for Slim Line or Full s. Projection for s = 2-3/16" (56mm). Projection for Architectural & Architectural s = 2-1/4" (57mm). 13

14 technical details parallel rigid arm C L Hinge 5/8" (16mm) Ref B A H Full C K D Mounting holes for closer body are spaced 3/4" (19mm) vertically x 12" (305mm) horizontally. Note: All measurements are Inches/mm. 2-1/8" * (54mm) Series s B Minimum Top Rail W/O With A Minimum Top Rail Clearance C Template Position for Hold Open or Stop at Listed Angle Holder-Stop 3020 Series To 180 K Length H Height D Arm Extensions 3100 No 12-3/4" (324) M 3500A 3500MA Slim Line 5-7/8" (149) 5" (127) 4-1/8" (105) 3-1/2" (89) 2-3/4" (70) 2-1/4" (57) 1-5/8" (41) 3-1/8" (79) 13" (330) Full 4-5/8" (117) 2-3/8" (60) 6-1/2" (165) 4-3/4" (121) 6" (152) 4-5/8" 5-7/8" (117) (149) 3-7/8" (98) 3-3/4" (95) 3-1/4" (83) 3-1/8" (79) 2-1/2" (64) 2-3/8" (60) 2" (51) 1-7/8" (48) 1-3/8" (35) 1-1/4" (32) 2-7/8" (73) 2-3/4"^ (70) 13-5/8" (346) 14" (356) 2-7/8" (73) 3-7/8" (98) 8" (203) 7-5/8" (194) 3-1/8" (79) 7-1/2" 3" (191) (76) ^Not available for doors that swing to 180. Door Size (Wood or ) Inches (cm) Sized s Model Number Multi-Sized s Interior Exterior Stop Only Hold Open Stop Only Hold Open 28" (71) - 32" (81) N/A PR3302, PR3502 PR3312, PR " (84)- 36" (91) 28" (71)- 32" (81) PR3303, PR3503 PR3313, PR " (94)- 41" (104) 33" (84)- 36" (91) PR3304, PR3504 PR3314, PR " (107)- 48" (122) 37" (94)- 41" (104) PR3305, PR3505 PR3315, PR3515 N/A 42" (107)- 48" (122) PR3306, PR3506 PR3316, PR3516 PR3301 PR3501 PR3311 PR3511 Note: 3301/3501 series door closers are set at midpower range from the factory and can be adjusted for door sizes noted above. * Projection is for Slim Line or Full s. Projection for s = 2-3/16" (56mm). Projection for Architectural & Architectural s = 2-1/4" (57mm). 14

15 technical details holder/stop arm C L Hinge 5/8" (16mm) Ref B A H Full C K D Mounting holes for closer body are spaced 3/4" (19mm) vertically x 12" (305mm) horizontally. Note: All measurements are Inches/mm. 2-1/8" * (54mm) Series s B Minimum Top Rail W/O With A Minimum Top Rail Clearance C Template Position for Hold Open or Stop at Listed Angle K Length H Height D Arm Extensions 3100 No 12-3/4" (324) Slim Line 5-7/8" 5" 4-1/8" 3-1/2" 2-3/4" 2-1/4" 1-5/8" 3300 (149) (127) (105) (89) (70) (57) (41) 13" (330) 3500 Full 3500M 3500A 3500MA 4-5/8" (117) 2-3/8" (60) 6-1/2" (165) 4-3/4" (121) 6" (152) 4-5/8" 5-7/8" (117) (149) 3-7/8" (98) 3-3/4" (95) 3-1/4" (83) 3-1/8" (79) 2-1/2" (64) 2-3/8" (60) 2" (51) 1-7/8" (48) 1-3/8" (35) 1-1/4" (32) 13-5/8" (346) 14" (356) 2-7/8" (73) 3-7/8" (98) 8" (203) 7-5/8" (194) 3-1/8" (79) 7-1/2" 3" (191) (76) Door Size (Wood or ) Inches (cm) Sized s Model Number Multi-Sized s Interior Exterior Stop Only Hold Open Stop Only Hold Open 28" (71) - 32" (81) N/A 3322, T, 3522T 33" (84)- 36" (91) 28" (71)- 32" (81) 3323, T, 3523T 37" (94)- 41" (104) 33" (84)- 36" (91) 3324, T, 3524T 42" (107)- 48" (122) 37" (94)- 41" (104) 3325, T, 3525T N/A 42" (107)- 48" (122) 3326, T, 3526T T 3521T Note: 3301/3501 series door closers are set at midpower range from the factory and can be adjusted for door sizes noted above. * Projection is for Slim Line or Full s. Projection for s = 2-3/16" (56mm). Projection for Architectural & Architectural s = 2-1/4" (57mm). 15

16 technical details holder/stop spring arms C L Hinge 5/8" (16mm) Ref B A H Full C K D Mounting holes for closer body are spaced 3/4" (19mm) vertically x 12" (305mm) horizontally. Note: All measurements are Inches/mm. 2-1/8"* (54mm) Series s B Minimum Top Rail W/O With A Minimum Top Rail Clearance C Template Position for Hold Open or Stop at Listed Angle K Length H Height D Arm Extensions 3100 No 12-3/4" (324) Slim Line 5-7/8" 5" 4-1/8" 3-1/2" 2-3/4" 2-1/4" 1-5/8" 3300 (149) (127) (105) (89) (70) (57) (41) 13" (330) 3500 Full 3500M 3500A 3500MA 4-5/8" (117) 2-3/8" (60) 6-1/2" (165) 4-3/4" (121) 6" (152) 4-5/8" 5-7/8" (117) (149) 3-7/8" (98) 3-3/4" (95) 3-1/4" (83) 3-1/8" (79) 2-1/2" (64) 2-3/8" (60) 2" (51) 1-7/8" (48) 1-3/8" (35) 1-1/4" (32) 13-5/8" (346) 14" (356) 2-7/8" (73) 3-7/8" (98) 8" (203) 7-5/8" (194) 3-1/8" (79) 7-1/2" 3" (191) (76) Door Size (Wood or ) Inches (cm) Sized s Model Number Multi-Sized s Interior Exterior Stop Only Hold Open Stop Only Hold Open 28" (71) - 32" (81) N/A 3332, T, 3532T 33" (84)- 36" (91) 28" (71)- 32" (81) 3333, T, 3533T 37" (94)- 41" (104) 33" (84)- 36" (91) 3334, T, 3534T 42" (107)- 48" (122) 37" (94)- 41" (104) 3335, T, 3535T N/A 42" (107)- 48" (122) 3336, T, 3536T T 3531T Note: 3301/3501 series door closers are set at midpower range from the factory and can be adjusted for door sizes noted above. * Projection is for Slim Line or Full s. Projection for s = 2-3/16" (56mm). Projection for Architectural & Architectural s = 2-1/4" (57mm). 16

17 technical details regular rigid heavy-duty arm C L Hinge 5/8" (16mm) Ref B E H A C Full K 2-1/8" * (54mm) Mounting holes for closer body are spaced 3/4" (19mm) vertically x 12" (305mm) horizontally. Note: All measurements are Inches/mm. Series s E Minimum Ceiling Clearance B Minimum Top Rail W/O W/3146 A Minimum Top Rail Clearance C Template Position for 100 Door opening K Length H Length Door Size (Wood or ) Inches (cm) Model Number Non-Hold Open Only Interior Exterior Sized s Multi-Sized s 36" (91) 30 (76) R3302, R3502 NHO NHO NHO NHO 7-1/8" 3100 No (181) Slim Line 3-1/2" 3300 (89) 7" (178) 3500 Full 3500M 3500A 3500MA 1-3/4" (44) 2-1/2" (64) 1-5/8" (41) 4-1/4" (108) 6-3/4" (171) 3-5/8" (92) 6-1/2" 3-1/2" (165) (89) 12-3/4" (324) 13" (330) 13-5/8" (346) 14" (356) 2-7/8" (73) 3-3/4" (95) 3-1/8" (79) 3" (76) 42" (107) 36" (91) R3303, R " (117) 42" (107) R3304, R (137) 48 (122) R3305, R3505 R3301 R3501 N/A 52" (132) R3306, R3506 Note: 3301/3501 series door closers are set at midpower range from the factory and can be adjusted for door sizes noted above. * Projection is for Slim Line or Full s. Projection for s = 2-3/16" (56mm). Projection for Architectural & Architectural s = 2-1/4" (57mm). 17

18 technical details uni stop - parallel arm C L Hinge 5/8" (16mm) Ref Mounting holes for closer body are spaced 3/4" (19mm) vertically x 12" (305mm) horizontally. B A H Full C K D 2-1/8" (54mm) Series M 3500A 3500MA M 3500A 3500MA M 3500A 3500MA Door Width s Slim Line Full Full Full B Minimum Top Rail W/O 4-3/4" (121) With 2-1/2" (64) A Minimum Top Rail Clearance 5-3/4" (146) 6-3/8" (162) C - Template Position for Hold Open or Stop at Listed Angle /8" (117) 7" (178) 9-1/4" (235) 4-5/8" (117) 4-3/8" (111) 5-1/2" (140) 7-5/8" 5-3/8" (194) (137) 5-3/4" (146) 6-3/8" (162) 7" (178) 6-3/4" (171) 5-1/2" (140) 10" 5-3/8" (254) (137) 5-3/4" (146) 6-3/8" (162) 9-1/4" (235) 9" (229) 5-1/2" (140) 12-1/4" 5-3/8" (311) (137) 4" (102) 6-1/4" (159) 8-3/8" (213) 4" (102) 3-3/4" (95) 7" (178) 6-1/4" (159) 6" (152) 9-3/8" (238) 8-3/8" (213) 8-1/8" (206) 11-1/2" (292) 3-1/2" (89) 5-3/4" (146) 7-3/4" (197) 3-1/2" (89) 3-1/4" (83) 6-1/2" (165) 5-3/4" (146) 5-1/2" (140) 8-3/4" (222) 7-3/4" (197) 7-1/2" (191) 10-7/8" (276) 3-1/8" (79) 5-1/4" (133) 7-1/8" (181) 3-1/8" (79) 2-7/8" (73) 6-1/8" (156) 5-1/4" (133) 5" (127) 8-1/4" (210) 7-1/8" (181) 6-7/8" (175) 10-1/4" (260) 2-3/4" (70) 4-3/4" (121) 6-5/8" (168) 2-3/4" (70) 2-1/2" (64) 5-3/4" (146) 4-3/4" (121) 4-1/2" (114) 7-3/4" (197) 6-5/8" (168) 6-3/8" (162) 9-3/4" (248) 2-3/8" (60) 4-3/8" (111) 6-1/4" (159) 2-3/8" (60) 2-1/8" (54) 5-3/8" (137) 4-3/8" (111) 4-1/8" (105) 7-3/8" (187) 6-1/4" (159) 6" (152) 9-1/4 (235) K Length 13" (330) 13-5/8" (346) 14" (356) 13" (330) 13-5/8" (346) 14" (356) 13" (330) 13-5/8" (346) 14" (356) H Height 2-7/8" (73) 3-7/8" (98) 3-1/8" (79) 3" (76) 2-7/8" (73) 3-7/8" (98) 3-1/8" (79) 3" (76) 2-7/8" (73) 3-7/8" (98) 3-1/8" (79) 3" (76) D Arm Extensions 8-3/8" (213) 9-7/8" (251) 11-1/4" (286) 8-3/8" (213) 8" (203) 7-7/8" (200) 7-1/2" (191) 9-7/8" (251) 9-1/2" (241) 9-3/8" (238) 9" (229) 11-1/4" (286) 10-7/8" (276) 10-3/4" (273) 10-3/8" (264) Door Widths (Wood or ) Inches (cm) Sized s Model Number Multi-Sized s Interior Exterior Stop Only Hold Open Stop Only Hold Open 28" (71) - 32" (81) N/A UNI3302, UNI3502 UNI3312, UNI " (83) - 36" (91) 28" (71) - 32" (81) UNI3303, UNI3503 UNI3313, UNI " (94) - 41" (104) 33" (83) - 36" (91) UNI3304, UNI3504 UNI3314, UNI " (107) - 48" (122) 37" (94) - 41" (104) UNI3305, UNI3505 UNI3315, UNI3515 N/A 42" (107) - 48" (122) UNI3306, UNI3506 UNI3316, UNI3516 UNI3301 UNI3501 UNI3311 UNI3511 x Specify Door Width 18

19 technical details uni stop - top jamb arm CL Hinge C F K Full 5/8" (16mm) Ref 2-1/8" * (54mm) Reveal H E 4-5/8" (117mm) A Mounting holes for closer body are spaced 3/4" (19mm) vertically x 12" (305mm) horizontally. Note: All measurements are Inches/mm. Series s F Minimum Frame Face E Minimum Ceiling Clearance A Minimum Top Rail Clearance C Template Position for Hold Open or Stop at Listed Angle K Length H Height W/O With 3148, 3158, 3547 & 3547A s W/O With W/O With 3148, 3158, 3547 & 3547A s Slim Line Full 1-1/2" (38) 2-3/4" (70) 1-1/2" (38) 9-1/2" (241) 8-7/8" (225) 8-1/4" (210) 7-3/4" (197) 7-3/8" (187) 7" (178) 13" (330) 2-7/8" (73) 3500M 1-3/4" (44) 1-5/8" (41) 3-3/4" (95) 1-5/8" (41) 1-7/8" (48) 3-3/4" (95) 9-1/4" (235) 8-5/8" (219) 8" (203) 7-1/2" (191) 7-1/8" (181) 6-3/4" (171) 13-5/8" (346) 3-7/8" (98) 3500A 3500MA 1-1/2" (38) 3" (76) 2-7/8" (73) 1-1/2" (38) 8-7/8" (225) 8-1/4" (210) 7-5/8" (194) 7-1/8" (181) 6-5/8" (168) 6-1/4" (159) 14" (356) 3-1/8" (79) Door Widths (Wood or ) Inches (cm) Sized s Model Number Multi-Sized s Interior Exterior Stop Only Hold Open Stop Only Hold Open 28" (71) - 30" (76) N/A UNIJ3302, UNIJ3502 UNIJ3312, UNIJ " (79) - 36" (91) 28" (71) - 30" (76) UNIJ3303, UNIJ3503 UNIJ3313, UNIJ " (94) - 42" (107) 31" (79) - 36" (91) UNIJ3304, UNIJ3504 UNIJ3314, UNIJ " (109) - 48" (122) 37" (94) - 42" (107) UNIJ3305, UNIJ3505 UNIJ3315, UNIJ3515 N/A 43" (109) - 48" (122) UNIJ3306, UNIJ3506 UNIJ3316, UNIJ3516 UNIJ3301 UNIJ3501 UNIJ3311 UNIJ3511 x Specify Frame Reveal Note: 3301/3501 series door closers are set at midpower range from the factory and can be adjusted for door sizes noted above. * Projection is for Slim Line or Full s. Projection for s = 2-3/16" (56mm). Projection for Architectural & Architectural s = 2-1/4" (57mm). 19

20 technical details pull side slide track C L Hinge 3-1/2" (89mm) 23" (584mm) 1-1/2" (38mm) 1-1/2" (38mm) 2" (51mm) E 1-1/2" (38mm) H B C Full K 2-1/8"* (54mm) Mounting holes for closer body are spaced 3/4" (19mm) vertically x 12" (305mm) horizontally. Note: All measurements are Inches/mm. Series E Minimum Top Rail W/O With 3146 B Minimum Top Rail Clearance Slim or Full Slim or Full C Template Position Slim or Full K Length Slim or Full H Height 3300ST 2-1/2" (64) 1-5/8" (41) 3-1/2" (89) 4-1/8" (105) 3-5/8" (92) 3-1/2" (89) 5-1/8" (130) 4-7/8" (124) 4-3/8" (111) 13" (330) 13-5/8" (346) 14" (356) 2-7/8" (73) 3-3/4" (95) 3-1/8" (79) 3" (76) 3500ST Maximum Door Width (Wood or ) Inches (cm) Model Number Sized s Multi-Sized s Non-Hold Open Hold Open Non-Hold Open Hold Open Interior Exterior " (81) N/A 38" (97) 32" (81) 48" (122) 38" (97) 3304ST, 3504ST 3305ST, 3505ST 3306ST, 3506ST 3304ST-180, 3504ST ST-180, 3505ST ST-180, 3506ST ST, 3514ST 3315ST, 3515ST 3316ST, 3516ST 3301ST 3501ST 3311ST 3511ST Note: 3301/3501 series door closers are set at midpower range from the factory and can be adjusted for door sizes noted above. * Projection is for Slim Line or Full s. Projection for s = 2-3/16" (56mm). Projection for Architectural & Architectural s = 2-1/4" (57mm). 20

21 technical details push side slide track CL Hinge 5" (127mm) 23" (584mm) 5/8" (16mm) Ref 1-1/2" (38mm) 1-1/2" (38mm) H E B Full C K 2-1/8"* (54mm) Mounting holes for closer body are spaced 3/4" (19mm) vertically x 12" (305mm) horizontally. Note: All measurements are Inches/mm. Series E Minimum Top Rail B Minimum Top Rail Clearance C Template Position K Length H Height W/O With 3146, 3158, 3548 & 3548A Slim or Full Slim or Full Slim or Full Slim or Full P3300ST 5" (127) 2-3/4" (70) 6" (152) 6-5/8" (168) 6-1/8" (156) 6" (152) 7/8" (22) 5/8" (16) 1/8" (3) 13" (330) 13-5/8" (346) 14" (356) 2-7/8" (73) 3-3/4" (95) 3-1/8" (79) 3" (76) P3500ST Maximum Door Width (Wood or ) Inches (cm) Model Number Sized s Multi-Sized s Non-Hold Open Hold Open Non-Hold Open Hold Open Interior Exterior " (81) N/A P3304ST, P3504ST P3314ST, P3514ST 38" (97) 32" (81) P3305ST, P3505ST P3315ST, P3515ST 48" (122) 38" (97) P3306ST, P3506ST P3316ST, P3516ST P3301ST P3501ST P3311ST P3511ST Note: 3301/3501 series door closers are set at midpower range from the factory and can be adjusted for door sizes noted above. * Projection is for Slim Line or Full s. Projection for s = 2-3/16" (56mm). Projection for Architectural & Architectural s = 2-1/4" (57mm). 21

22 technical details pull side low profile track 1-11/16" (43mm) 25" (635mm) 1" (25mm) B 21/32" (17mm) H 1-1/8" 29mm) A C K 2-1/8"* (54mm) Mounting holes for closer body are spaced 3/4" (19mm) vertically x 12" (305mm) horizontally. Series B Minimum Top Rail W/O With 3146 Slim or Full A Minimum Top Rail Clearance Slim or Full C Template Position Slim or Full K Length Slim or Full H Height 3300ST 2-1/2" (64) 5/8" (16) 3" (76) 4-5/8" (117) 3-1/8" (79) 3" (76) 5-5/8" (143) 5-3/8" (137) 4-7/8" (124) 13" (330) 13-5/8" (346) 14" (356) 3" (76) 3-7/8" (98) 3-1/4" (83) 3-1/8" (79) 3500ST Maximum Door Width Inches (cm) Sized s Model Number Multi-Sized s Interior Non-Hold Open Hold Open Non-Hold Open Hold Open 32" (81) 3344ST 3544ST 3344STH 3544STH 38" (97) 3345ST 3545ST 3345STH 3545STH 3341ST 3541ST 3341STH 3541STH 48" (122) 3346ST 3546ST 3346STH 3546STH Note: 3301/3501 door closers can be adjusted for door sizes noted. Multi-size closers are set at mid power range from the factory. *Projection is for Slim Line or Full s. Projection for s = 2-3/16" (56mm). Projection for Architectural & Architectural s = 2-1/4" (57mm). 22

23 technical details push side low profile track Mounting holes for closer body are spaced 3/4" (19mm) vertically x12" (305mm) horizontally. B Minimum Top Rail A Minimum Top Rail Clearance C Template Position K Length H Height Series W/O With 3146, 3158, 3548, 3548A Slim or Full Slim or Full Slim or Full Slim or Full P3300ST P3500ST 4" (102) 1-3/4" (44) 5" (127) 5-5/8" (143) 5-1/8" (130) 5" (127) 1-1/8" (29) 7-8" (22) 3/8" (10) 13" (330) 13-5/8" (346) 14" (356) 3" (76) 3-7/8" (98) 3-1/4" (83) 3-1/8" (79) Maximum Door Width Inches (cm) Sized s Model Number Multi-Sized s Interior Non-Hold Open Hold Open Non-Hold Open Hold Open 32" (81) P3344ST P3544ST P3344STH P3544STH 38" (97) P3345ST P3545ST P3345STH P3545STH P3341ST P3541ST P3341STH P3541STH 48" (122) P3346ST P3546ST P3346STH P3546STH Note: 3301/3501 door closers can be adjusted for door sizes noted. Multi-size closers are set at mid power range from the factory. *Projection is for Slim Line or Full s. Projection for s = 2-3/16" (56mm). Projection for Architectural & Architectural s = 2-1/4" (57mm). 23

24 accessories regular arm Mounting s Slim Line Installations 13" (330) 2-1/4" (57) 13" (330) 2-1/4" (57) Narrow Top Rail - #3146 : For use where the narrow top rail of the door prevents the closer from being mounted directly on to the door surface. This drop plate must be used for any Series 3000 closer mounted on a top rail between 1-9/16" and 2-7/16" (40 and 62mm) in height, or any 3000 low profile closer mounted on a top rail between 1-7/16" and 2-5/16" (36 and 59mm) in height. Concealed Door Holder - #3146 : For use where a concealed door holder prevents normal mounting of the closer to the door. This is the same plate used for narrow rail mounting, but is inverted for this application to permit the mounting screws to clear the bottom of the door-holder preparation in the top rail of the door. This places the centerline of the plate's upper mounting screws at 2-3/16" (56mm) from the top of the door. Full Installations 13" (330) 13" (330) 2-7/8" (73) Exposed Back - #3445 Molded Full Decorative Back : For use on doors with glass lights where a closer with a molded full cover is installed and the closer back is exposed. This plate covers the back of the installation to give a pleasing appearance from the reverse side. 2-7/8" (73) Exposed Back/Narrow Top Rail - Exposed Back Concealed Door Holder - #3446 Molded Full Kit: For use with molded full cover installation when a 3146 is needed as a drop plate on a narrow top rail, or as a clearance plate for a concealed door holder, and the closer back is exposed. Kit contains a 3146 and a 3445 Decorative. Installations 13-5/8" (346) 3-7/8" (98) 13-5/8" (346) 3-7/8" (98) Exposed Back - #3545 Decorative Back : For use on doors with glass lights where a closer with a metal full cover is installed and the closer back is exposed. This plate covers the back of the installation to give a pleasing appearance from the reverse side. 13-5/8" (346) 4" (102) Note: All measurements are Inches/mm. Concealed Door Holder - #3546 : For use where a concealed door holder prevents the normal mounting of the closer to the door. This plate permits the mounting screws to clear the bottom of the door-holder preparation in the top rail of the door. This places the centerline of the plate's upper mounting screws at 2-3/16" (56mm) from the top of the door. Exposed Back/Narrow Top Rail - #3549 Kit: For use with metal full cover installations, when a 3146 is needed as a drop plate on a narrow top rail and the closer back is exposed. Kit contains a 3146 and a 3545 Decorative. 24

25 accessories regular arm closer mounting plates architectural plastic or metal cover installations 14" (356) 3-1/4" (83) Exposed Back - #3545A Architectural or Architectural Decorative Back : For use on doors with glass lights where a closer with an architectural plastic or metal cover is installed and the closer back is exposed. This plate covers the back of the installation to give a pleasing appearance from the reverse side. 14" (356) 3-1/4" (83) Concealed Door Holder - #3546A Architectural or Architectural : For use where a concealed door holder prevents the normal mounting of the closer to the door. This plate permits the mounting screws to clear the bottom of door-holder preparation in the top rail of the door. This places the centerline of the plate's upper mounting screws at 2-3/16" (56mm) from the top of the door. 14" (356) 3-1/4" (83) Exposed Back/Narrow Top Rail - #3549A Architectural or Architectural Kit: For use with architectural plastic or metal cover installations when a 3146 plate is needed as a drop plate on a narrow top rail and the closer back is exposed. Kit contains a 3146 and a 3545A Decorative. 13" (330) 2-1/4" (57) 25

26 accessories regular arm brackets for non-hold open arms Molded / Bull Nose Trim - #291 Bracket: For use where the door frame has molded or bull nose trim which will not accept a standard non-hold open shoe. The bracket is mortised into the frame rabbet, and projects beyond the face of the frame. It will accommodate a frame rabbet up to 2" (51mm) deep. 1-1/2" (38) 3" (76) Molded / Bull Nose Trim - #291A Bracket: This bracket is similar to, but longer than, the 291 bracket. It is designed to accommodate frame rabbets from 2" to 2-7/8" (51mm to 73mm) deep. 1-1/2" (38) 3-3/4" (95) brackets for hold open arms 3-5/16" (84) 2-1/16" (52) Molded / Bull Nose Trim - #292 Bracket: For use where the door frame has molded or bull nose trim which will not accept a standard hold open shoe. It is mortised into the frame rabbet, and projects beyond the face of the frame. It will accommodate a rabbet up to 2" (51mm) deep. This bracket is used in combination with the standard hold open mounting shoe. 1-7/16" (37) 2-1/2" (64) Note: All measurements are Inches/mm. 26

27 accessories top jamb arm closer mounting plates slim line installations 13" (330) Low Ceiling Clearance - #3146 : For use where low ceiling clearance prevents normal top jamb mounting. This plate is used when clearance is from 1-7/8" to 2-7/8" (48mm to 73mm). Where ceiling clearance is less than 1-7/8" (48mm) see #3148 below. 2-1/4" (57) Overhead Door Holder - #3146 : For use where a surface or concealed overhead door holder prevents normal top jamb mounting. This plate drops the closer and allows arm mounting screws to clear the bottom of the door holder. This places the centerline of the arm mounting screws at 2-7/8" (73mm) from the top of the door. 13" (330) Low Ceiling Clearance - #3148 : For use where the ceiling clearance is between 1-1/2" and 1-3/4" (38mm and 44mm). 3-5/8" (92) 13-15/16" (354) 3-7/8" (98) metal cover installations Low Ceiling Clearance - Overhead Door Holder - #3547 Full : For use where a low ceiling clearance prevents normal top jamb mounting. This plate is used when the clearance is between 1-5/8" and 3-7/8" (41mm and 98mm). Or for use where a surface or concealed overhead door holder prevents normal top jamb mounting of a closer with a metal full cover. This plate drops the closer and allows arm mounting screws to clear the bottom of the door holder. This places the centerline of the arm mounting screws at 3-7/8" (98mm) from the top of the door. architectural plastic or metal cover installations 14" (356) 3-7/8" (98) Low Ceiling Clearance - Overhead Door Holder - #3547A Architectural or Architectural : For use where low ceiling clearance prevents normal top jamb mounting. This plate is used when the clearance is between 1-5/8" and 3-7/8" (41mm and 98mm). Also for use where a surface or concealed overhead door holder prevents normal top jamb mounting of a closer with an architectural plastic or metal full cover. This plate drops the closer and allows arm mounting screws to clear the bottom of the door holder. This places the centerline of the arm mounting screws at 3-7/8" (98mm) from the top of the door. Note: All measurements are Inches/mm. 27

28 accessories parallel arm closer mounting plates slim line installations 13" (330) 3-5/8" (92) Narrow Top Rail - #3148 (3300 Series): For use where a narrow top rail prevents the closer from being mounted directly to the door surface. This drop plate can be used to mount a closer on a top rail as narrow as 2-7/8" (73mm) in height. 13" (330) 2-7/8" (73) full cover installations Exposed Back - #3445 Molded Full Decorative Back : For use on doors with glass lights where a closer with molded full cover is installed and the closer back is exposed. This plate covers the back of the installation to give a pleasing appearance from the reverse side. 13" (330) 4-1/2" (114) Exposed Back/Narrow Top Rail - #3158 Molded Full : For use on doors with glass lights where a closer with molded full cover is installed and the back of the closer is exposed. This covers the back of the installation and gives a pleasing appearance from the reverse side. 13-5/8" (346) 13-5/8" (346) 3-7/8" (98) 5-1/8" (130) metal cover installations Exposed Back - #3545 Full Decorative Back : For use on doors with glass lights where a closer with full metal cover is installed and the back of the closer is exposed. This plate covers the back of the installation and gives a pleasing appearance from the reverse side. Exposed Back/Narrow Top Rail - #3548 Full : For use on doors with glass lights where a closer with metal full cover is installed on a narrow top rail, and the back of the cover is exposed. This drop plate can be used to mount a closer on a top rail as narrow as 2-7/8" (73mm) in height. This plate covers the back of the installation and gives a pleasing appearance from the reverse side. architectural plastic or metal cover installations 14" (356) 14" (356) 3-1/4" (83) 4-5/8" (117) Exposed Back - #3545A Architectural or Architectural Decorative Back : For use on doors with glass lights where a closer with an architectural plastic or metal cover is installed and the closer back is exposed. This plate covers the back of the installation to give a pleasing appearance from the reverse side. Exposed Back/Narrow Top Rail - #3548A Architectural or Architectural : For use on doors with glass lights where a closer with an architectural plastic or metal cover is installed on a narrow top rail, and the back of the cover is exposed. This drop plate can be used to mount a closer on a top rail as narrow as 2-7/8" (73mm) in height. This plate covers the back of the installation to give a pleasing appearance from the reverse side. Note: All measurements are Inches/mm. 28

29 accessories parallel arm - brackets for non-hold open arms 4-7/8 (124) 1-1/2 (38) Standard Installation - #289A Soffit : This soffit plate is supplied standard with parallel arm closers. It can be mounted where the frame soffit is as narrow as 1" (25 mm). 3-1/2 (89) 2-3/16 (56) 2 (51) Mounting between Doors - #413A Soffit Bracket: For use where insufficient space between companion doors does not permit use of other soffit plates. This bracket permits mounting of the closer between doors with as little as 3" (76mm) of header space. Permits closer arm to clear up to 5/8" (16mm) high stop. 3-5/8 (92) 3 (76) Narrow Frame/Removable Stop - #297 Soffit : For use where a narrow frame or frame with removable stop does not permit use of the standard soffit plate. This soffit plate may be mounted on the frame soffit or the frame rabbet where the stop does not exceed 5/8" (16mm) in height. All of the screw holes are in a straight line, requiring as little as 1-1/4" (32mm) of frame reveal to mount bracket and maintain good closer arm geometry. Where the frame soffit is as wide as 2" (51mm), this soffit plate may be used to clear weatherstripping that is up to 1-3/8" (35mm) wide and 5/8" (16mm) in height. 3-1/2 (89) 4 (102) Blade/Applied Stop - #299 Soffit : For use where a blade or applied stop does not permit installation of the standard soffit plate. Mounts to either the frame soffit or rabbet. Since this soffit plate projects 7/8" (22mm) less than a standard soffit plate, it requires a minimum frame reveal of 1-1/2" (38mm). Permits closer to clear up to a 5/8" (16mm) stop. 3-1/2 (89) 2-1/2 (64) Flush Transom - #589L Angle Bracket: For use where rabbeted or flush transom conditions prevent installation of a soffit plate. Used in combination with the 289 soffit plate, or may be used in combination with the 290 soffit plate when it is necessary for the closer arm to clear a separate overhead door holder. 1-1/2 (38) 3-1/2 (89) 3-1/2 (89) 1-15/16 (49) Extra-Clearance - #290 Offset Soffit : For use where the need for additional clearance prevents use of the standard soffit plate. This plate mounts to the frame soffit to provide up to 2" (51mm) of clearance when a separate overhead door holder is used. Standard mounting requires a 2-5/8" (67mm) wide frame soffit. It may also be used where unusually high frame stops or weather-stripping prevent the use of other soffit plates. Note: All measurements are Inches/mm. 29

30 accessories parallel arm - brackets for non-hold open and hold open arms 3-1/2 (89) Parallel Hold Open - #588 Adapter : Supplied standard with all parallel arm hold open closers. It can also be used to convert regular arm or top jamb hold open arms to parallel arm installation. It can be mounted where the frame soffit is as narrow as 1" (25mm). 4-9/16 (116) 2-9/16 (65) 3-1/2 (89) 2-1/2 (64) Flush Transom - #589L Angle Bracket: For use where rabbeted or flush transom conditions prevent installation of a soffit plate. Used in combination with the 588 adapter plate, this bracket fastens to the overhead transom to provide a mounting surface for the soffit plate assembly. 1-1/2 (38) 1/2 (30) 3-3/8 (86) 1 (25) Clearance/Support Blade Stop - #891 Spacer Block: For use where the door frame has a blade stop and the soffit plate must be mounted on the frame rabbet. This accessory is used in combination with the standard spacer block to provide clearance of the blade stop. Also used with non-hold open arms. Note: All measurements are Inches/mm. 30

31 accessories parallel rigid, holder/stop, holder/stop spring arms Mounting s Slim Line installations 13" (330) 3-5/8" (92) Narrow Top Rail - #3148 : For use where a narrow top rail prevents the closer from being mounted directly to the door surface. This drop plate can be used to mount a closer on a top rail as narrow as 2-9/16" (65mm) in height. 13" (330) 2-7/8" (73) Full Installations Exposed Back - #3445 Molded Full Decorative Back : For use on doors with glass lights where a closer with molded full cover is installed and the closer back is exposed. This plate covers the back of the installation to give a pleasing appearance from the reverse side. 13" (330) 4-1/2" (114) Exposed Back/Narrow Top Rail - #3158 Molded Full : For use on doors with glass lights where a closer with molded full cover is installed and the back of the closer is exposed. This covers the back of the installation and gives a pleasing appearance from the reverse side. 13-5/8" (346) 3-7/8" (98) Installations Exposed Back - #3545 Full Decorative Back : For use on doors with glass lights where a closer with full metal cover is installed and the back of the closer is exposed. This plate covers the back of the installation and gives a pleasing appearance from the reverse side. 13-5/8" (346) 5-1/8" (130) Exposed Back/Narrow Top Rail - #3548 Full : For use on doors with glass lights where a closer with metal full cover is installed on a narrow top rail, and the back of the cover is exposed. This drop plate can be used to mount a closer on a top rail as narrow as 2-9/16" (65mm) in height. This plate covers the back of the installation and gives a pleasing appearance from the reverse side. Architectural or Installations 14" (356) 3-1/4" (83) Exposed Back - #3545A Architectural or Architectural Decorative Back : For use on doors with glass lights where a closer with an architectural plastic or metal cover is installed and the closer back is exposed. This plate covers the back of the installation to give a pleasing appearance from the reverse side. 14" (356) 4-5/8" (117) Exposed Back/Narrow Top Rail - #3548A Architectural or Architectural or Architectural : For use on doors with glass lights where a closer with an architectural plastic or metal cover is installed on a narrow top rail, and the back of the cover is exposed. This drop plate can be used to mount a closer on a top rail as narrow as 2-9/16" (65mm) in height. This plate covers the back of the installation to give a pleasing appearance from the reverse side. Note: All measurements are Inches/mm. 31

32 accessories parallel rigid, holder/stop, holder/stop spring arms Brackets for Non-Hold Open Arms & Hold Open Arms 5/8 (16) 1/2 (13) 7/8 (22) Standard - #293S Spacer Block: For use where a narrow frame soffit does not provide adequate support for the soffit plate. Supplied as standard with all parallel rigid arm closers. 3-1/2 (89) 2-1/2 (64) Flush Rabbeted Transom - #293L Angle Bracket: For use where flush transom conditions prevent mounting of the standard soffit plate. This bracket is used in combination with the standard soffit plate. 3 (76) 1-1/2 (38) 1-1/2 (38) 2 (51) Narrow Frame - #890 Support Bracket: For use where the frame is narrow and the soffit plate cannot be mounted directly to the frame soffit or rabbet. Used in combination with the #891 Spacer Block on blade stop frames to provide extra support and needed clearance of the blade stop. Used on frame where the frame doesn't exceed 5/8" (16mm) in height. 3-3/8 (86) 1 (25) Clearance/Support Blade Stop - #891 Spacer Block: For use where the door frame has a blade stop and the soffit plate must be mounted on the frame rabbet. This accessory is used in combination with the standard spacer block to provide clearance of the blade stop. Also used with non-hold open arms. 1/2 (30) Note: All measurements are Inches/mm. 32

33 accessories uni stop arm Mounting s Parallel Arm 13" (330) 3-5/8" (92) Narrow Top Rail - #3148 : For use where a narrow top rail prevents the closer from being mounted directly to the door surface. This drop plate can be used to mount a closer on a top rail as narrow as 2-7/16" (62mm) in height. 13" (330) 2-7/8" (73) Full Installations Exposed Back - #3445 Molded Full Decorative Back : For use on doors with glass lights where a closer with molded full cover is installed and the closer back is exposed. This plate covers the back of the installation to give a pleasing appearance from the reverse side. 13" (330) 4-1/2" (114) Exposed Back/Narrow Top Rail - #3158 Molded Full : For use on doors with glass lights where a closer with molded full cover is installed and the back of the closer is exposed. This covers the back of the installation and gives a pleasing appearance from the reverse side. 13-5/8" (346) 3-7/8" (98) Installations Exposed Back - #3545 Full Decorative Back : For use on doors with glass lights where a closer with full metal cover is installed and the back of the closer is exposed. This plate covers the back of the installation and gives a pleasing appearance from the reverse side. 13-5/8" (346) 5-1/8" (130) Exposed Back/Narrow Top Rail - #3548 Full : For use on doors with glass lights where a closer with metal full cover is installed on a narrow top rail, and the back of the cover is exposed. This drop plate can be used to mount a closer on a top rail as narrow as 2-9/16" (65mm) in height. This plate covers the back of the installation and gives a pleasing appearance from the reverse side. Architectural or Installations 14" (356) 3-1/4" (83) Exposed Back - #3545A Architectural or Architectural Decorative Back : For use on doors with glass lights where a closer with an architectural plastic or metal cover is installed and the closer back is exposed. This plate covers the back of the installation to give a pleasing appearance from the reverse side. 14" (356) 4-5/8" (117) Exposed Back/Narrow Top Rail - #3548A Architectural or Architectural or Architectural : For use on doors with glass lights where a closer with an architectural plastic or metal cover is installed on a narrow top rail, and the back of the cover is exposed. This drop plate can be used to mount a closer on a top rail as narrow as 2-7/16" (62mm) in height. This plate covers the back of the installation to give a pleasing appearance from the reverse side. Note: All measurements are Inches/mm. 33

34 accessories uni stop arm Mounting Soffit Reinforcing Brackets (for Parallel Arm) 2-1/4" (57) 5/16" (8) Additional Support - #6190 Reinforcing Bracket: Standard for use with all parallel arm UNI Stop door controls. Provides additional support to the soffit plate on installations with door frame reveals from 1-7/8" to 4-5/8" (48mm to 117mm). 2-1/4" (57) 1-1/2" (38) 3-1/2" (89) 2-1/2" (64) Flush Rabbeted Transom - #589L Angle Bracket: Optional for use with all parallel arm UNI Stop door controls. For use where rabbeted or flush transom conditions prevent installation of the soffit plate assembly. This bracket fastens to the overhead transom to provide a mounting surface for the soffit plate assembly. 2-1/4" (57) 5/8" (16) Wide Frame - #6191 Reinforcing Kit: Optional for use with all parallel arm UNI Stop door controls. Used to support the soffit plate on installations with wide frames. Clamps may be used with or without the spacer block, depending on frame conditions. Spacer Block Clamp 5/8" (16) 5/8" (16) Minimum 4-1/8" (105) 2-3/4" (70) Clamp Note: All measurements are Inches/mm. 34

35 accessories uni stop arm Mounting S Top Jamb 13" (330) 3-5/8" (92) Narrow Top Rail - #3148 : For use where a narrow top rail prevents the closer from being mounted directly to the door surface. This drop plate can be used to mount a closer on a top rail as narrow as 2-7/16"(62mm) in height. 13" (330) 2-7/8" (73) Full Installations Exposed Back - #3445 Molded Full Decorative Back : For use on doors with glass lights where a closer with molded full cover is installed and the closer back is exposed. This plate covers the back of the installation to give a pleasing appearance from the reverse side. 13" (330) 4-1/2" (114) Exposed Back/Narrow Top Rail - #3158 Molded Full : For use on doors with glass lights where a closer with molded full cover is installed and the back of the closer is exposed. This covers the back of the installation and gives a pleasing appearance from the reverse side. Installations 13-15/16" (354) 3-7/8" (98) Low Ceiling Clearance - Overhead Door Holder - #3547 Full : For use where a low ceiling clearance prevents normal top jamb mounting. This plate is used when the clearance is between 1-5/8" and 3-3/4" (41mm and 95mm). Or for use where a surface or concealed overhead door holder prevents normal top jamb mounting of a closer with a metal full cover. This plate drops the closer and allows arm mounting screws to clear the bottom of the door holder. This places the centerline of the arm mounting screws at 3-7/8" (98mm) from the top of the door. Architectural or Installations 14" (356) 3-7/8" (98) Low Ceiling Clearance - Overhead Door Holder - #3547A Architectural or Architectural : For use where low ceiling clearance prevents normal top jamb mounting. This plate is used when the clearance is between 1-5/8" and 3-3/4" (41mm and 95mm). Or for use where a surface or concealed overhead door holder prevents normal top jamb mounting of a closer with an architectural plastic or metal full cover. This plate drops the closer and allows arm mounting screws to clear the bottom of the door holder. This places the centerline of the arm mounting screws at 3-7/8" (98mm) from the top of the door. Note: All measurements are Inches/mm. 35

36 parts door closer body assemblies covers Model Drawing Slim Line* 3200P 1-3/4" high x 2-1/8" deep x 13" long (44 x 54 x 330) Model Description 310XLAP Sized closer bodies 3100, 3300, LAP Multi-sized closer bodies 3101, 3301, 3501 X= Specify Size LAP = Less All Parts s Series fasteners Steel Door Application (Side view) Aluminum and Wood Door Application (Aluminum Door Shown) (Side view) Steel Door Application Sex-nut Sex-nut / / Sleeve-nut :: SN "SN" (4 per (4 pack) per pack) or Sex-nut / Sleeve-nut & or Screw: "SNB" (4 per pack) Sex-nut / Sleeve-nut & Screw : SNB (4 per pack) Door SN's SNB's 1-3/4" SN s SN-134SNB s SNB /8 Door 1 3/4 Door 2 1/4 Door S.S. SNB s 13/4 Door (stainless steel) 2" SN-134 N/A SNB SNB /4" SN-214 SNB S.S. SNB's 1-3/4" SN-134SS SNB134SS-38 Thru Bolt & Grommet Nut : TBGN (4 per pack) 1 3/8 Door 1 3/4 Door 2 1/4 Door Type of Material SN-138 SN-214 SN-134SS TBGN s TBGN TBGN TBGN SNB SNB SNB134SS-38 BFK4/ P* N/A N/A N/A 3400P 3400M 3400A 3400MA Aluminum and Wooden Door Application (Aluminum Door Shown) Through-bolt & Grommet Nut : "TBGN" (4 per pack) Door Note: All measurements are Inches/mm. TBGN's 1-3/8" TBGN /4" TBGN /4" TBGN Full 3400P 2-7/8" high x 2-1/8" deep x 13" long (73 x 54 x 330) Full 3400M 3-7/8" high x 2-3/16" deep x 13-5/8" long (98 x 56 x 346) Architectural 3400A 3-3/32" high x 2-1/4" deep x 13-7/8" long (79 x 57 x 352) Architectural 3400MA 3" high x 2-3/16" deep x 13-15/16" long (76 x 56 x 354 ) Arm Type Reg., Par. & Top Jamb Parallel Rigid, Holder/Stop Regular Rigid Heavy-Duty Arm Uni Stop Arm *Pinion cap not included with Slim Line cover. Part #1639 Torx Screw Packs TX38 PRTX38 RTX38 UNITX38 36

7500/7700 SERIES. Institutional Door Closer

7500/7700 SERIES. Institutional Door Closer Institutional Door Closer Page Revised Electronically 5/13, 10/13 7500/7700 SERIES overview The 7500 Series Door Closer offers customers the ideal combination of superior performance, strength and quality.

More information

Since 1880 The American Original Architectural Series Door Closers

Since 1880 The American Original Architectural Series Door Closers Since 1880 The American Original 8000 Architectural Series Door Closers 8000 Series Door Closers OVERVIEW Standard on all 8000 Series Closers ANSI A156.4, Grade 1 10-year warranty Non-handed UL10C Staked

More information

78-B/F Series. Traditional Door Closers

78-B/F Series. Traditional Door Closers 78-B/F Series Traditional Door Closers introduction The Norton Series 78-B/F Traditional Surface Closers represent a combination of traditional styling and modern closer features. All closer sizes are

More information

Closer with traditional styling for low to moderate traffic openings 78-B/F DOOR CLOSER CATALOG

Closer with traditional styling for low to moderate traffic openings 78-B/F DOOR CLOSER CATALOG Closer with traditional styling for low to moderate traffic openings 78-B/F S E R I E S DOOR CLOSER CATALOG Introduction The 78-B/F Series is a surface closer with traditional styling that offers multiple

More information

51 Series Door Closers. An ASSA ABLOY Group brand

51 Series Door Closers. An ASSA ABLOY Group brand 51 Series Door Closers An ASSA ABLOY Group brand Introduction CONTENTS Features & Benefits...3 Overview...4 Fasteners...4 Features...5 Finishes...6 How to Order...7 Applications...8 Technical Details...9-11

More information

An ASSA ABLOY Group brand. 400/4400 Series. Institutional Door Closer

An ASSA ABLOY Group brand. 400/4400 Series. Institutional Door Closer An ASSA ABLOY Group brand 400/4400 Series Institutional Door Closer the engineer s choice Yale s 400/4400 Series Institutional Door Closers offer customers the ideal combination of superior performance,

More information

51 Series Door Closers. An ASSA ABLOY Group brand

51 Series Door Closers. An ASSA ABLOY Group brand 51 Series Door Closers An ASSA ABLOY Group brand Introduction contents Features & Benefits...3 Overview...4 Fasteners...4 Features...5 Finishes...6 How to Order...7 Applications...8 Technical Details...9-11

More information

7500/7700 SERIES INSTITUTIONAL DOOR CLOSER

7500/7700 SERIES INSTITUTIONAL DOOR CLOSER Page Revised Electronically 5/13 OVERVIEW Cutaway View Optional Delayed Action Valving Optional: DA Delayed Action Closing Sweep Speed Latch Speed S D S L Backcheck Cushioning Backcheck Positioning Sweep

More information

8000 SERIES Architectural Door Closer

8000 SERIES Architectural Door Closer Architectural Door Closer overview The 8000 eries Door Closers offer the ideal combination of appearance, reliability and durability in today's market. With features such as staked valves, precise valve

More information

7570 SERIES Security Door Closer

7570 SERIES Security Door Closer 7570 SERIES Security Door Closer INTRODUCTION Norton High Security Closers are designed for use in prisons, government buildings, schools, financial institutions, or any installation where vandalism, abuse,

More information

ROFU TJ 152-A. Y ALE SECURITY GROUP 50BC Series Door Closer. 50BC Series Door Closers. Sizing Chart for Installations. Ordering Information

ROFU TJ 152-A. Y ALE SECURITY GROUP 50BC Series Door Closer. 50BC Series Door Closers. Sizing Chart for Installations. Ordering Information ROFU 50BC Series Door Closers Specifications U.L. Listing All Yale 50 Series Door Closers with non-hold-open arms are listed by Underwriters Laboratories, Inc. for use on labeled fire doors. Tri-Pack Closer

More information

7500/7700 Series. Institutional Door Closers

7500/7700 Series. Institutional Door Closers 7500/7700 Series Institutional Door Closers OVERVIEW Features Non-handed Rack-and-pinion design Cast aluminum body 2-3/16" (56mm) projection 1-1/2" (38mm) diameter piston 5/8" (16mm) diameter pinion journals

More information

7500/7700 Series. Institutional Door Closers

7500/7700 Series. Institutional Door Closers 7500/7700 Series Institutional Door Closers OVERVIEW Features Non-handed Rack-and-pinion design Cast aluminum body 2-1/8" (54mm) projection 1-1/2" (38mm) diameter piston 5/8" (16mm) diameter pinion journals

More information

DOOR CLOSER CATALOG 50BC, 51 50BC CLOSER

DOOR CLOSER CATALOG 50BC, 51 50BC CLOSER CLOSER DOOR CLOSER 50BC, 51 50BC 51 CATALOG THE ENGINEER S CHOICE Yale 50 Series Closers are designed to fit almost any application and are the choice of engineers worldwide. They are ideal for use with

More information

1600 SERIES ALUMINUM STOREFRONT DOOR CLOSERS

1600 SERIES ALUMINUM STOREFRONT DOOR CLOSERS INTRODUCTION The 1600 Series door closers offer proven quality, performance and reliability unmatched by the competition. A staple in the industry, these ANSI/BHMA Grade 1 closers are designed for exterior

More information

Multi-sized cast iron closer for high use applications DOOR CLOSER CATALOG

Multi-sized cast iron closer for high use applications DOOR CLOSER CATALOG Multi-sized cast iron closer for high use applications 9500 S E R I E S DOOR CLOSER CATALOG INTRODUCTION Ideal for high use openings, the Norton 9500 Series Cast Iron door closer offers the durability,

More information

7500/7700 SERIES. Institutional Door Closer

7500/7700 SERIES. Institutional Door Closer Institutional Door Closer Page Revised Electronically 5/13, 10/13 7500/7700 SERIES overview The 7500 Series Door Closer offers customers the ideal combination of superior performance, strength and quality.

More information

9540 SERIES. Cast Iron Door Closer

9540 SERIES. Cast Iron Door Closer Cast Iron Door Closer Introduction The Norton 9540 s provide an ideal retrofit solution for retail, office, government and other commercial facilities. Certified to ANSI/BHMA Grade 1 requirements for long

More information

Fully adjustable door closer for aluminum storefronts and other medium traffic applications DOOR CLOSERS CATALOG

Fully adjustable door closer for aluminum storefronts and other medium traffic applications DOOR CLOSERS CATALOG Fully adjustable door closer for aluminum storefronts and other medium traffic applications 1600 S E R I E S DOOR CLOSERS CATALOG INTRODUCTION The 1600 Series door closers offer proven quality, performance

More information

9000 Series Trinity The world's most intelligent door closer

9000 Series Trinity The world's most intelligent door closer 9000 Series Trinity The world's most intelligent door closer INTRODUCTION Designed for doors that are subject to changing conditions, the Norton 9000 Series Trinity offers customers an intelligent door

More information

7500 SERIES. Institutional Door Closer

7500 SERIES. Institutional Door Closer Institutional Door Closer overview The 7500 Series Door Closer offers customers the ideal combination of superior performance, strength and quality. Ideal for interior or exterior doors in facilities that

More information

Door Controls DOOR CLOSERS

Door Controls DOOR CLOSERS Door Controls Hager door closers offer architects, contractors, and building owners a superior product with proven reliability. In fact, our 5100, 5200, and 5300 Series Grade 1 models are the only closers

More information

DOUBLE LEVER ARM DOUBLE LEVER ARM SINGLE LEVER ARM 5010 SINGLE LEVER ARM

DOUBLE LEVER ARM DOUBLE LEVER ARM SINGLE LEVER ARM 5010 SINGLE LEVER ARM SERIES PRODUCT SELECTION GUIDE The concealed LCN closers feature a modern design for concealment in either the head frame or top rail of the door. This guide is based on the desired mounting of the closer.

More information

Concealed overhead closer for high-end applications DOOR CLOSERS CATALOG

Concealed overhead closer for high-end applications DOOR CLOSERS CATALOG Concealed overhead closer for high-end applications 7900 S E R I E S DOOR CLOSERS CATALOG INTRODUCTION The 7900 Series Overhead Concealed Closers offer extremely durable operation with the vandal resistance

More information

Norton ABS-AMERICAN BUILDING SUPPLY, INC Series Multi-Sized Closers - Packed 6 per case

Norton ABS-AMERICAN BUILDING SUPPLY, INC Series Multi-Sized Closers - Packed 6 per case ABS-AMERICAN BUILDING SUPPLY, INC. 1601 Series Multi-Sized Closers - Packed 6 per case Features Two Power Ranges: Each series can be adjusted through a range of sizes: Series 1601 Normal Power Range Closers,sizes

More information

PULL SIDE MOUNTED PUSH SIDE MOUNTED DOUBLE LEVER ARM LEVER ARM P DOUBLE LEVER ARM SINGLE LEVER ARM 4110T 4210T*

PULL SIDE MOUNTED PUSH SIDE MOUNTED DOUBLE LEVER ARM LEVER ARM P DOUBLE LEVER ARM SINGLE LEVER ARM 4110T 4210T* 4000 SERIES PRODUCT SELECTION GUIDE Surface mounted 4000 Series LCN closers feature a modern design engineered for each application, easy installation, and superior performance. This guide is based on

More information

PUSH SIDE M O U N T E D PULL SIDE M O U N T E D D O U B L E LEVER ARM LEVER ARM P D O U B L E LEVER ARM S I N G L E LEVER ARM

PUSH SIDE M O U N T E D PULL SIDE M O U N T E D D O U B L E LEVER ARM LEVER ARM P D O U B L E LEVER ARM S I N G L E LEVER ARM 4000 SERIES PRODUCT SELECTION GUIDE Surface mounted 4000 Series LCN closers feature a modern design engineered for each application, easy installation, and superior performance. This guide is based on

More information

DC3000 Series. Door Closers

DC3000 Series. Door Closers Door Closers Table of Contents Applications 2 Features 3 & 4 Mountings 5 & 6 Door Closer Arms 7 & 8 Mounting Brackets 9 Brackets and Covers 10 Size and Handing 11 How to Order 12 Quick Codes 13 Helpful

More information

CONCEALED CLOSER SERIES

CONCEALED CLOSER SERIES CLOSER SERIES PRODUCT SELECTION GUIDE The concealed LCN closers feature a modern design for concealment in either the head frame or top rail of the door. This guide is based on the desired mounting of

More information

High Security Closers Series

High Security Closers Series High Security Closers APPLICATIONS n For any concealed or surface mounted installation subject to potential abuse or vandalism. n For correctional, aluminum, hollow metal, or wood doors and frames. n Can

More information

A robust closer delivering superior performance and reliability DOOR CLOSER CATALOG

A robust closer delivering superior performance and reliability DOOR CLOSER CATALOG A robust closer delivering superior performance and reliability 7500 S E R I E S DOOR CLOSER CATALOG INTRODUCTION The 7500 Series is a robust, multi-sized surface closer designed to deliver superior performance

More information

1600BC/1601 series Aluminum Storefront Door Closers

1600BC/1601 series Aluminum Storefront Door Closers 1600BC/1601 series Aluminum Storefront Door Closers introduction Features Exceeds 10 million cycles (witnessed and verified by UL) Non-handed Rack-and-pinion design Cast aluminum body 2-7/8" (73mm) projection

More information

Door Closer Cycle. How to Select the Proper Closer. Things to Consider

Door Closer Cycle. How to Select the Proper Closer. Things to Consider Door Control Closer Spring Adjustment Not Shown in Door Closer Cycle Diagram Effects the entire cycle of the door closer movement Used to size closer for application requirements Determines the amount

More information

1600BC/1601 Series. Aluminum Storefront Door Closers

1600BC/1601 Series. Aluminum Storefront Door Closers 1600BC/1601 Series Aluminum Storefront Door Closers Page Revised Electronically 5/12 & 7/12 1600BC/1601 Series Door Closers INTRODUCTION Features Exceeds 10 million cycles (witnessed and verified by UL)

More information

5300 Series 5300 SERIES

5300 Series 5300 SERIES 5300 Series Hager 5300 Series Grade 1 door closer is ideal for schools, hospitals, and other high abuse and high traffic environments. It is constructed of an aluminum alloy and provides smooth door control.

More information

1000 SERIES SURFACE MOUNTED CLOSERS

1000 SERIES SURFACE MOUNTED CLOSERS 1000 SERIES SURFACE MOUNTED CLOSERS PRODUCT SELECTION GUIDE Surface mounted 1000 Series LCN closers feature a modern slim line design for easy installation on narrow head frames and top rails. This guide

More information

7100SZ SERIES. Multi-Point Closer/Holder with Motion Sensor

7100SZ SERIES. Multi-Point Closer/Holder with Motion Sensor safezone Multi-Point Closer/Holder with Motion Sensor introduction Designed with safety in mind, SafeZone takes door closers to a higher level. SafeZone uses a multi-point, electromechanical closer and

More information

General Information 351 Series Powerglide

General Information 351 Series Powerglide General Information Closer Spring Adjustment (not shown) Effects the entire cycle of the door closer movement Used to size closer for application requirements Determines the amount of force with which

More information

351 Series Door Closers Models: Finishes: BHMA BHMA Description

351 Series Door Closers Models: Finishes: BHMA BHMA Description Door Closers Adams Rite provides Surface Applied and Pocket Closers from Sargent for controlling the closing of The RITE Door. 351 Series The 351 Powerglide line of surface door closers has been engineered

More information

1600BC/1601 Series Aluminum Storefront Door Closers

1600BC/1601 Series Aluminum Storefront Door Closers 1600BC/1601 Series Aluminum Storefront Door Closers INTRODUCTION Features Non-handed Rack-and-pinion design Cast aluminum body 2-7/8" (73mm) projection 1-3/8" (35mm) diameter piston 5/8" (16mm) diameter

More information

Multi-point closer/holder with motion sensor 7100SZ DOOR CLOSER CATALOG

Multi-point closer/holder with motion sensor 7100SZ DOOR CLOSER CATALOG Multi-point closer/holder with motion sensor 7100SZ S E R I E S DOOR CLOSER CATALOG INTRODUCTION The 7100 Series SafeZone door closer safeguards occupants throughout a variety of facilities with the detection

More information

DC8000 Series. Door Closers

DC8000 Series. Door Closers Door Closers Introduction Applications High-quality products and innovative designs are the foundation for the long history and reputation of Corbin Russwin Architectural Hardware. That tradition continues

More information

CONCEALED CLOSER SERIES

CONCEALED CLOSER SERIES CONCEALED CLOSER SERIES APPLICATIONS n For aluminum, hollow metal, or wood doors and frames. n Can be used with hinge or pivot mounted door. n Closers for 4 or minimum 1-3/4 head frame or 4 top rail. n

More information

High Security Closers Series

High Security Closers Series High Security Closers APPLICATIONS n For any concealed or surface mounted installation subject to potential abuse or vandalism. n For correctional, aluminum, hollow metal, or wood doors and frames. n Can

More information

5300 Series. Architectural Commercial Door Control

5300 Series. Architectural Commercial Door Control 5300 Series Architectural Commercial Door Control 5300 SERIES Architectural Commercial Door Control SUGGESTED ARCHITECTURAL SPECIFICATIONS All door closers shall be narrow projection American Eagle 5300

More information

HIGH SECURITY CLOSERS SERIES

HIGH SECURITY CLOSERS SERIES HIGH SECURITY CLOSERS SERIES PRODUCT SELECTION GUIDE High Security LCN closers feature a vandal resistant design engineered for each application, easy installation, and superior performance. This guide

More information

*HINGE (pull) side mount shown

*HINGE (pull) side mount shown CLOSER MOUNTS *HINGE (PULL) SIDE TOP JAMB (PUSH SIDE) PARALLEL ARM (PUSH SIDE) LCN 4040 SERIES The 4040 SUPER SMOOTHEE is LCN s most flexible heavy duty closer designed for institutional and other rugged

More information

Door Closers. DC8000 Series

Door Closers. DC8000 Series Door Closers DC8000 Series Introduction Applications High-quality product and innovative design are the foundations of Corbin Russwin s long history and reputation. That tradition continues with the new

More information

5100 Series. Architectural Door Control

5100 Series. Architectural Door Control 5100 Series Architectural Door Control 5100 SERIES ARCHITECTURAL STYLE COMMERCIAL DOOR CONTROL SUGGESTED ARCHITECTURAL SPECIFICATIONS All door closers shall be American Eagle 5100 Series with full rack

More information

HIGH SECURITY SERIES

HIGH SECURITY SERIES HIGH SECURITY SERIES PRODUCT SELECTION GUIDE High Security LCN closers feature a vandal resistant design engineered for each application, easy installation, and superior performance. This guide is based

More information

268, 269 & 278. Concealed Door Closers

268, 269 & 278. Concealed Door Closers 268, 269 & 278 Concealed Door Closers Copyright 2004-2018, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents General Information....3 268 Features and Benefits...4

More information

Finishes/Colors/ Powder Coat

Finishes/Colors/ Powder Coat Features The 4030 is a cast iron, universal closer designed specifically for doors in moderate traffic conditions. This versatile closer compliments the rest of the heavy duty 4000 and offers the choice

More information

General Information 281 Series Powerglide

General Information 281 Series Powerglide General Information All Weather Fluid All 281 Series closers are equipped with fluid that allows the units to operate effectively in extreme temperatures without readjustment. Finishes Powder coated and

More information

CRAFTMASTER HARDWARE CO., INC Architectural. Product Guide

CRAFTMASTER HARDWARE CO., INC Architectural. Product Guide Architectural Product Guide INTRODUCTION Norton Door Controls offers a comprehensive line of door controls designed and manufactured to ensure superior performance, reliability and application breadth.

More information

7100SZ Series SafeZone. Multi-Point Closer/Holder with Motion Sensor

7100SZ Series SafeZone. Multi-Point Closer/Holder with Motion Sensor 7100SZ Series SafeZone Multi-Point Closer/Holder with Motion Sensor INTRODUCTION Designed with safety in mind, SafeZone takes door closers to a higher level. SafeZone uses a multi-point, electromechanical

More information

3100 Series. Commercial Door Control

3100 Series. Commercial Door Control 3100 Series Commercial Door Control 3100 SERIES COMMERCIAL Door Control SUGGESTED ARCHITECTURAL SPECIFICATIONS All door closers shall be American Eagle 3100 Series with full rack and pinion construction,

More information

The 4040XP is LCN s most durable and flexible heavy duty closer designed for institutional and other demanding high traffic applications.

The 4040XP is LCN s most durable and flexible heavy duty closer designed for institutional and other demanding high traffic applications. Features The 4040XP is LCN s most durable and flexible heavy duty closer designed for institutional and other demanding high traffic applications. Certifications Body Construction Fluid Handing Grade 1

More information

Architectural Commercial Door Control

Architectural Commercial Door Control 5300 Series Slim Line Architectural Commercial Door Control 5300 SERIES SLIM LINE Architectural Commercial Door Control All door closers shall be narrow projection American Eagle 5300 Series with full

More information

LCN 4040 SERIES. CLOSER MOUNTS HINGE (PULL SIDE) (Shown) TOP JAMB (PUSH SIDE) PARALLEL ARM (PUSH SIDE)

LCN 4040 SERIES. CLOSER MOUNTS HINGE (PULL SIDE) (Shown) TOP JAMB (PUSH SIDE) PARALLEL ARM (PUSH SIDE) CLOSER MOUNTS HINGE (PULL SIDE) (Shown) TOP JAMB (PUSH SIDE) PARALLEL ARM (PUSH SIDE) The 4040 SUPER SMOOTHEE is LCN s most flexible heavy duty closer designed for institutional and other rugged high traffic

More information

7100SZ Series SafeZone. Multi-Point Closer/Holder with Motion Sensor

7100SZ Series SafeZone. Multi-Point Closer/Holder with Motion Sensor 7100SZ Series SafeZone Multi-Point Closer/Holder with Motion Sensor Page Revised Electronically 8/11 7100SZ Series SafeZone INTRODUCTION Designed with safety in mind, SafeZone takes door closers to a higher

More information

5200 Series

5200 Series 5200 Series 5200 Series Closers are engineered and designed to offer the ideal combination of appearance and reliability. The 5200 Series Closers are constructed of aluminum alloy to be installed on exterior

More information

5300 Series. Architectural Door Control

5300 Series. Architectural Door Control 5300 Series Architectural Door Control 5300 SERIES ARCHITECTURAL STYLE COMMERCIAL DOOR CONTROL SUGGESTED ARCHITECTURAL SPECIFICATIONS All door closers shall be narrow projection American Eagle 5300 Series

More information

7100 Series. Heavy Duty Architectural Door Control

7100 Series. Heavy Duty Architectural Door Control 7100 Series Heavy Duty Architectural Door Control 7100 SERIES Heavy Duty Architectural Door Control SUGGESTED ARCHITECTURAL SPECIFICATIONS All door closers shall be PDQ Industries, Inc. 7100 Series with

More information

QUICKSHIP DELIVERS PDQ S PRIORITY Series WHEN TIME EQUALS MONEY. Architectural Door Control SUGGESTED ARCHITECTURAL SPECIFICATIONS HOW TO ORDER

QUICKSHIP DELIVERS PDQ S PRIORITY Series WHEN TIME EQUALS MONEY. Architectural Door Control SUGGESTED ARCHITECTURAL SPECIFICATIONS HOW TO ORDER SUGGESTED ARCHITECTURAL SPECIFICATIONS HOW TO ORDER SIZE SERIES DS Door Saver Arm DSHO Door Saver Hold Open Arm EDA Extra Duty Arm, EDA HO Extra Duty Arm Hold Open HO Hold Open, Tri-Pack PA Tri-Pack (standard)

More information

Series. Powerglide Door Closer

Series. Powerglide Door Closer 351 Series Powerglide Door Closer Copyright 2005, 2008-2015, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written

More information

D-1610/D-1611 SERIES: DOOR CLOSERS. D-1610/D-1611 Series. Door Closers. Trusted experts. Proven reliability. Simply STANLEY.

D-1610/D-1611 SERIES: DOOR CLOSERS. D-1610/D-1611 Series. Door Closers. Trusted experts. Proven reliability. Simply STANLEY. D-1610/D-1611 SERIES: DOOR CLOSERS D-1610/D-1611 Series Door Closers Trusted experts. Proven reliability. Simply STANLEY. TABLE OF CONTENTS General Information...2, 3 Standard Application...4 Parallel

More information

1431 Series. Powerglide Door Closer

1431 Series. Powerglide Door Closer 1431 Series Powerglide Door Closer Copyright SARGENT Manufacturing Company 2005-2007, 2009-2015, All rights reserved. Table of Contents General Information...1 Features and Benefits...2 Standard Applications....3

More information

7100 Series. Heavy Duty Architectural Door Control

7100 Series. Heavy Duty Architectural Door Control 7100 Series Heavy Duty Architectural Door Control 7100 SERIES HEAVY DUTY ARCHITECTURAL STYLE DOOR CONTROL SUGGESTED ARCHITECTURAL SPECIFICATIONS All door closers shall be American Eagle 7100 Series with

More information

351 SERIES POWERGLIDE DOOR CLOSER

351 SERIES POWERGLIDE DOOR CLOSER 351 SERIES POWERGLIDE DOOR CLOSER Table of Contents Page How to Select the Proper Closer 1 Cutaway Illustrations and 351 Features 2 351 Standard Applications 3-4 351 Top Jamb Applications 5-6 351 Parallel

More information

MOUNTING FINISH COVER CYLINDER **ARM FUNCTION REGULAR (DOUBLE) DESIGNER METAL NON-HANDED NON-SIZED

MOUNTING FINISH COVER CYLINDER **ARM FUNCTION REGULAR (DOUBLE) DESIGNER METAL NON-HANDED NON-SIZED HINGE (PULL) SIDE MOUNT LCN 4010 SERIES The 4010 SMOOTHEE is LCN s best performing heavy duty closer designed specifically for institutional and other rugged high traffic applications. FEATURES Ten Million

More information

281 Series Powerglide

281 Series Powerglide Cast Iron Door Closer Copyright SARGENT Manufacturing Company 2005-2007, 2009-2015, All rights reserved. Table of Contents General Information.................................................................

More information

Product Catalog. hardwaresuppliers.com

Product Catalog. hardwaresuppliers.com Product Catalog hardwaresuppliers.com 800-334-5625 2 Table of Contents Pages 3-5...1000 Series-Surface Mounted Pages 6-7...2030 & 3130 Series - Concealed Pages 8-15...4000 Series - Heavy-Duty Surface Mounted

More information

4000 Series mounted closers

4000 Series mounted closers 4000 mounted closers APPLICATIONS n For aluminum, hollow metal, or wood swinging doors and frames. n Can be used with hinge or pivot mounted door. n Adapter plates and other installation accessories available

More information

*HINGE (pull) side mount shown COVER ACCESSIBILITY NON-HANDED NON-SIZED AVB**

*HINGE (pull) side mount shown COVER ACCESSIBILITY NON-HANDED NON-SIZED AVB** CLOSER MOUNTS *HINGE (PULL) SIDE TOP JAMB (PUSH SIDE) PARALLEL ARM (PUSH SIDE) 4040XP SERIES The 4040XP is LCN s most durable and flexible heavy duty closer designed for institutional and other demanding

More information

422 Series. Cam Action Door Closer

422 Series. Cam Action Door Closer Cam Action Door Closer Copyright SARGENT Manufacturing Company 2005-2018. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is

More information

1450 Series. Key Features. LCN quality and value, backed by a 25-year warranty. Medium duty cast aluminum door closer

1450 Series. Key Features. LCN quality and value, backed by a 25-year warranty. Medium duty cast aluminum door closer Medium duty cast aluminum door closer LCN quality and value, backed by a 25-year warranty. The 1450 cast aluminum closer was specially designed to deliver consistent, dependable, long-term performance

More information

3100 Series. Commercial Door Control

3100 Series. Commercial Door Control 3100 Series Commercial Door Control 3100 SERIES COMMERCIAL DOOR CONTROL SUGGESTED ARCHITECTURAL SPECIFICATIONS All door closers shall be American Eagle 3100 Series with full rack and pinion construction,

More information

DC5000 Series. Cam Action Door Closer

DC5000 Series. Cam Action Door Closer Series Cam Action Door Closer Introduction Table of Contents Introduction...2 Features... 3 Mountings... 4 Accessories... 5 How to Order... 6 Quick Codes... 6 Helpful Terms... 7 Specifications... 8 Applications

More information

281 Series Powerglide Door Closer General Information

281 Series Powerglide Door Closer General Information General Information All Weather Fluid All 281 Series closers are equipped with fluid that allows the units to operate effectively in extreme temperatures without readjustment Finishes Powder coated and

More information

Product Catalog Phone: Fax:

Product Catalog Phone: Fax: Product Catalog Phone: 800-321-9602 Fax: 800-328-6070 LCN 2 Table of Contents and Finish Information Pages 3-5...1000 Series-Surface Mounted Pages 6-7...2030 & 3130 Series - Concealed Pages 8-14...4000

More information

*HINGE (pull) side mount shown

*HINGE (pull) side mount shown CLOSER MOUNTS *HINGE (PULL) SIDE TOP JAMB (PUSH SIDE) PARALLEL ARM (PUSH SIDE) Designed for maximum versatility, the 1460, available with multiple cover options, can be used for both commercial and institutional

More information

FIRE/LIFE SAFETY SERIES PRODUCT SELECTION GUIDE

FIRE/LIFE SAFETY SERIES PRODUCT SELECTION GUIDE FIRE/LIFE SAFETY SERIES PRODUCT SELECTION GUIDE SENTRONIC Series LCN closer/holders combine heavy duty closers with electrically controlled hold-open functions to control fire and smoke barrier doors.

More information

D O O R C L O S E R S

D O O R C L O S E R S DOOR CLOSERS DOOR CLOSER Philadelphia Hardware Group, Inc. is presenting the finest ADVANTAGE surface mounting door closers certified by BHMA including: Multi-size door closer: 9000, 8000, 6000, 6000S

More information

Surface Applied Door Closers

Surface Applied Door Closers 7300 Equia nestotatus enis 015 Surface Applied Door s Lecest Suntur Orem fuga Equia nestotatus Disciisi nisquissus Nequisi Voloreptatae Consecumque soloribus Iminveria volorum dormakaba 7300 surface applied

More information

T57 SERIES LOW ENERGY OPERATOR INTRODUCTION FEATURES BENEFITS PATENTS TABLE OF CONTENTS

T57 SERIES LOW ENERGY OPERATOR INTRODUCTION FEATURES BENEFITS PATENTS TABLE OF CONTENTS INTRODUCTION A reliable ADA solution for moderate traffic applications, the T57 Low Energy Operator comprises Norton s heavy-duty 1601 door closer. The use of a hydraulic closer ensures quiet and consistently

More information

281 Series Powerglide

281 Series Powerglide Cast Iron Door Closer Copyright SARGENT Manufacturing Company 2005-2007, 2009-2010, All rights reserved. Table of Contents Table of Contents General Information.................................................................

More information

Surface Applied Door Closers DORMA 8600

Surface Applied Door Closers DORMA 8600 Surface Applied Door Closers DORMA 8600 Surface Applied Door Closers The 8600 Series closer represents the next generation of door control designed to exceed the demands of today s buildings. With features

More information

U1500. Surface Applied Door Closers

U1500. Surface Applied Door Closers U1500 Surface Applied Door Closers U1500 SURFACE APPLIED DOOR CLOSERS U1500 SERIES SURFACE CLOSERS CONTENTS U1500 Surface Applied Door Closers Technical Details/Specifications 3 Features 3 Ordering Guide

More information

*4110 HCUSH mount shown

*4110 HCUSH mount shown *PARALLEL ARM (PUSH SIDE) MOUNT The 4110 SMOOTHEE is LCN s best performing heavy duty closer designed specifically for institutional and other rugged high traffic applications. FEATURES Standard 4110 series

More information

FIRE/LIFE SAFETY CLOSERS/HOLDERS SERIES

FIRE/LIFE SAFETY CLOSERS/HOLDERS SERIES FIRE/LIFE SAFETY CLOSERS/HOLDERS SERIES PRODUCT SELECTION GUIDE SENTRONIC Series LCN closer/holders combine heavy duty closers with electrically controlled hold-open functions to control fire and smoke

More information

Full-featured operator with slim profile for moderate to high traffic applications LOW ENERGY OPERATOR CATALOG

Full-featured operator with slim profile for moderate to high traffic applications LOW ENERGY OPERATOR CATALOG Full-featured operator with slim profile for moderate to high traffic applications 6300 S E R I E S LOW ENERGY OPERATOR CATALOG INTRODUCTION The Norton 6300 Series Low Energy Operator offers a broad set

More information

General Information 281 Series Powerglide

General Information 281 Series Powerglide General Information All Weather Fluid All 281 Series closers are equipped with fluid that allows the units to operate effectively in extreme temperatures without readjustment. Finishes Powder coated and

More information

Overhead Concealed Door Closer DORMA RTS88

Overhead Concealed Door Closer DORMA RTS88 Overhead Concealed Door Closer DORMA RTS88 Overhead Concealed Door Closer A complete line of accessories is available for wood, aluminum, and hollow metal applications, both single and double-acting center

More information

1430/1431 SERIES POWERGLIDE DOOR CLOSERS

1430/1431 SERIES POWERGLIDE DOOR CLOSERS 1430/1431 SERIES POWERGLIDE DOOR CLOSERS 1430/1431 Series Powerglide Door Closers Table of Contents Page Cutaway Illustrations and Features 1 How to Select a Proper Closer 2 ADA Compliance 3 General Information

More information

Series. Powerglide Door Closer

Series. Powerglide Door Closer 351 Series Powerglide Door Closer Copyright 2005, 2008-2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written

More information

Series 9540 J9540. Installation Instructions Multi-Sized 1 to 6 Non-Hold Open. Regular Arm Applications. Parallel Arm Applications

Series 9540 J9540. Installation Instructions Multi-Sized 1 to 6 Non-Hold Open. Regular Arm Applications. Parallel Arm Applications Series 940 J940 ASSA JL940 ABLOY Installation Instructions Multi-Sized to 6 Non-Hold Open Regular Arm Applications Left Hand Regular Arm Application Contents Page Template Template with 984-8 Drop Plate

More information

1431 Series. Powerglide Door Closer

1431 Series. Powerglide Door Closer 1431 Series Powerglide Door Closer Table of Contents Table of Contents General Information and Control Points................................ 1 Features and Benefits...............................................

More information

1331 Series. Door Closers

1331 Series. Door Closers 1331 Series Door Closers Copyright 2004, 2007, 2009, 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Table of Contents Features, Benefits & Applications......................................................

More information

LCN 4010T SERIES HINGE (PULL) SIDE

LCN 4010T SERIES HINGE (PULL) SIDE HINGE (PULL) SIDE MOUNT The 4010T SMOOTHEE is LCN s best performing heavy duty track closer designed specifically for interior doors in institutional and other rugged high traffic applications. FEATURES

More information

Surface Applied Door Closers

Surface Applied Door Closers 7300 Surface Applied Door Closers Table of Contents Technical Details and Specifications.................. 3 How to Order................................... 4 Technical Drawings Regular round form arm.........................

More information