Surface Applied Door Closers

Transcription

1 7300 Equia nestotatus enis 015 Surface Applied Door s Lecest Suntur Orem fuga Equia nestotatus Disciisi nisquissus Nequisi Voloreptatae Consecumque soloribus Iminveria volorum

2 dormakaba 7300 surface applied door closer 7300 series surface closers 3 Technical Details and Specifications Accessories 4 How to order 1 Round form arm (8 mm) Technical Drawings 1 Round form arm (10 mm) Regular mount 1 Round form arm (secured elbow) (8 mm rod) 5 round form arm 1 Regular arm shoe and rod 5 friction hold open Narrow profile arm (8 mm) 6 heavy-duty cushion arm Narrow profile arm (10 mm) 6 extra heavy-duty spring cushion arm Friction hold open arm Top jamb mount Heavy-duty cushion arm 7 round form arm 14 Extra heavy-duty spring cushion arm 7 friction hold open 14 Heavy-duty super parallel arm 8 heavy-duty cushion arm 14 Heavy-duty door saver cushion arm 8 extra heavy-duty spring cushion arm 14 Extra heavy-duty door saver spring cushion arm Parallel mount 14 Cushion/spring cushion arm accessories 9 round form arm 15 Track arm 9 friction hold open 15 Push side track arm 10 Heavy-duty super parallel arm 15 BP73 backplate 10 x heavy-duty door saver cushion arm 15 BP86 backplate 11 x extra heavy-duty door saver spring cushion arm 15 BP86T backplate Track mount 15 BP600C conversion plate 11 x pull side door mounted 15 DP73 drop plate 1 x pull side frame mounted 16 DP86 drop plate 1 x push side soffit mounted 16 AB73 angle bracket x flush push side door mounted 16 AB86 angle bracket 16 P86 Parallel arm bracket DORMA USA quality and environmental management systems in Reamstown, PA and Steeleville, IL are certified to ISO 9001:008 and ISO 14001: Parallel hold open bracket Parallel flush transom bracket Narrow frame bracket Flush transom bracket Mortised jamb bracket Parallel drop bracket Blade stop spacer Heavy-duty blade stop spacer Slim plastic cover Sex nuts

3 Technical Details Specifications The 7300 Series closers offer modern styling for a new era of safe and reliable door control. The 7300 Series offers a compact design and is available in an assortment of sprayed finishes to complement any 's decor. These features, along with numerous installation options and fixed spring sizes, make this closer an ideal solution in a variety of applications Technical details Fixed spring sizes 3, 4, and 5. Non-handed for regular, top jamb, and parallel arm applications. Quick and easy to install. Compact design. Two noncritical adjusting valves (sweep and latch) work to provide consistent closing speeds under a wide variety of temperatures. Adjustable provides cushioning when the door is abusively opened. Available with optional self-drilling screws for steel door and frame applications (DPK86). Available with optional self-tapping screws for aluminum door and frame applications (TPK86). Certification ANSI/BHMA A156.4 Grade 1 certified. UL and CUL listed. Meets UL10C for positive pressure. CSFM approved. Specification All closers shall be DORMA 7300 Series hydraulic surface applied rack and pinion closers. The closer has two independent valves to separately control sweep and latch closing speeds and provide constant speeds when temperatures change. Standard with to provide cushioning effect in. Optional specification All 7300 closers to have slim plastic cover (COV). s to have arm with a selective single point hold open between for regular mount (FH) and for parallel arm mount (specify FHP). All 7300 closers to have parallel arm bracket for non-hold open parallel arm applications (P86). All closers to have sex nuts with machine screws for 1-3/4" door (SNB1) or 1-3/8" door (SNB). s to have self-drilling screws for steel doors and frames (DPK86). s to have self-tapping screws for aluminum doors and frames (TPK86). s to have TORX security for all exposed fasteners (TX86). Finishes Aluminum: 689 Bronze: 691 (Dull), 690 (Statuary), or 695 (Dark Duranodic) Gold: 696 Black: 693 For optional custom color or Designer Color Finishes Contact Customer Service. Warranty For details, refer to Limited Warranty on our website at go.dormakaba.com/terms-da Features Fixed spring sizes 3, 4, 5 Non-handed Parallel arm bracket Controlled closing with two adjustment valves Backcheck Hold open Self-drilling screws (DPK) Self-tapping screws (TPK) Tamper-resistant TORX screws Slim plastic cover yes - no optional 3

4 dormakaba 7300 surface applied door closer How to order 7300 Series Series Spring Size Round Arm Non-Hold Open, Tri-Pack Round Arm Non-Hold Open, TJ 4" 8" Reveal Round Arm Non-Hold Open, Reg/TJ 0" 4" Reveal Round Arm Secure Non-Hold Open, Tri-Pack Round Arm Secure Non-Hold Open, Reg./TJ 0" 4" Reveal Friction Hold Open, Tri-Pack Friction Hold Open, TJ 4" 8" Reveal Friction Hold Open, Reg./TJ 0" 4" Reveal Heavy-duty Door Saver Cushion, Parallel Heavy-duty Door Saver Cushion Thumb Turn Hold Open, Parallel Extra Heavy-duty Door Saver Spring Cushion, Parallel Extra Heavy-duty Door Saver Spring Cushion Thumb Turn Hold Open, Parallel Heavy-duty Cushion, Reg./TJ 0" 3-1/" Reveal Extra Heavy-duty Spring Cushion Reg./TJ 0" 3-1/" Reveal Heavy-duty Cushion, Top Jamb 3-1/" 6-1/" Reveal Extra Heavy-duty Spring Cushion, Top Jamb 3-1/" 6-1/" Reveal Super Parallel Super Parallel Thumb Turn Hold Open Track, Pull Side Door Mounted Jamb Track, Pull Side Frame Face Mounted Push Track, Push Side Soffit Mounted Flush Track, Push Side Transom Mounted Track Hold Open, Pull Side Door Mounted Push Track Hold Open, Push Side Soffit Mounted ANSI Size 5 ANSI Size 4 ANSI Size 3 AR ARP ARJ AR AO8P AO8 FHP FHJ FH DS DST SDS SDST IS ISH SIS SISH ISJ ISJH SISJ SISJH SPA SPAT T JT PT FT TH JTH PTH FTH Arm Type Cover COV Slim Cover No Cover COMBO Fastener Pack Heavy-duty Cushion Hold Open, Reg/TJ 0" 3-1/" Reveal Finish PNT Extra Heavy-duty Spring Cushion Hold Open, Reg./TJ 0" 3-1/" Reveal Heavy-duty Cushion Hold Open, Top Jamb 3-1/" 6-1/" Reveal Extra Heavy-duty Spring Cushion Hold Open, Top Jamb 3-1/" 6-1/" Reveal Jamb Track Hold Open, Pull Side Frame Face Mounted Flush Track Hold Open, Pull Side Frame Face Mounted Special Sprayed Finish (must specify) Gold Dark Duranodic Bronze Black Dull Bronze Statuary Bronze Aluminum Primed COMBO Default Fastener Pack SNB1 SNB Sex Nuts and Machine Screws, 1-3/4" Sex Nuts and Machine Screws, 1-3/8" DPK86 CMBDPK Self-Drilling Std. and Self-Drilling TPK86 Self-Tapping CMBTPK Std. and Self-Tapping TX86 Torx Security Pack AWS All Wood Screws NOTES: All combinations of features and options are not available for all models. To simplify initial installation, a range of back plates (BPxx), drop plates (DPxx), brackets, and spacers are available. Refer to Accessories section for details. 4

5 How to order Technical drawings Technical Drawing Symbols & Notes Recommended application N/A Not applicable/application not recommended Regular Round Form Arm AR AO8 9-1/4 (35) 1-1/4 (3) 1-1/4 (311) -5/8 (67) (Right hand) 4-5/8 (117) (48) 4-1/" 4-1/" Butt hinges Minimum door rail for mounting closer -1/". Minimum door rail to bottom of optional slim plastic cover -5/8". Size Selection Chart Exterior '-0" min. '-6" Door Width Interior N/A N/A Exterior N/A N/A Opening Backcheck Regular Friction Hold Open FH 1-1/4 (3) 1-1/4 (311) (Right hand) -3/4 (70) (48) 4-1/" 4-1/" Butt hinges Minimum door rail for mounting closer -5/8". Minimum door rail to bottom of optional slim plastic cover -3/4". Size Selection Chart Exterior '-0" min. '-6" Door Width Interior N/A N/A Exterior N/A N/A Template Ref. Dim "A" To /8" (181) To /8" (155) Over /8" (9) Dim "B" 1-5/8" (31) 11-5/8" (95) 9-1/8" (3) Opening Backcheck Min. Hold Open Max. Hold Open

6 dormakaba 7300 surface applied door closer Regular heavy-duty cushion arm IS/ISH 1-7/16 (37) 1-1/ (318) -5/8 (67) (Right hand) (48) 4-1/" 4-1/" Butt hinges Minimum door rail for mounting closer ". Minimum door rail to bottom of slim plastic cover -5/8" '-0" min. '-6" Interior N/A N/A Exterior N/A N/A /16" (195) 90 7" (178) /16" (157) /8" (156) /16" (144) /4" (3) Dim "A" Dim "B" -7/8" (35) -1/" (343) -1/4" (337) 1-5/8" (31) 1-1/4" (311) 11-7/8" (30) * Hold open is approximately 5 7 less than the maximum listed in the chart. Regular extra heavy-duty spring cushion arm SIS/SISH -1/4 (57) 14 (356) (Right hand) 3-3/16 (81) (48) '-0" min. '-6" 4-1/" 4-1/" Butt hinges Interior N/A N/A Exterior N/A N/A Minimum door rail for mounting closer -1/". Minimum door rail to bottom of slim plastic cover -5/8". 85 9" (9) /" (15) /" (191) /4" (17) Dim "A" Dim "B" 11-9/16" (94) 11-1/16" (81) 10-1/16" (56) 9-5/16" (37) * Hold open is approximately 5 7 less than the maximum listed in the chart. 6

7 Technical Drawings Top jamb round form arm ARJ (>4" to 8" reveal) AR ( 4" reveal) AO8* ( 4" reveal) *Offers articulation flexibility for applications such as cam lift hinges 4-5/8 (117) (48) Minimum ceiling clearance (No cover, COV) 3-1/4 (83) 9-1/4 (35) 1-/16 (46) 5/8 Stop (16) 1-5/8 (30) Reveal 4-1/" 4-1/" Butt hinges Minimum frame face for mounting closer 1-3/4" '-0" min. '-6" Interior N/A N/A Exterior N/A N/A Template ref. Reveal Arm maximum To 180 0" AR " AR >4" ARJ " ARJ NOTE: bold type shows supplied arm Top jamb friction hold open FHJ (>4" to 8" reveal) NOTE: use FH for reveal 4 (48) 5/8 Stop (16) -1/4 (58) 1-1/4 (311) 3-1/4 (83) Reveal Minimum ceiling clearance (No cover, COV) Minimum frame face for mounting closer 1-3/4" '-0" min. '-6" Interior N/A N/A Exterior N/A N/A Template ref. Dim "A" To /8" (181) To /8" (155) Over /8" (9) Dim "B" -1/8" (333) 11-5/8" (95) 9-1/8" (3) Reveal Arm maximum Min. hold open Max. hold open 0" FH " FH >4" FHJ " FHJ " FH " FH >4" FHJ " FHJ " FH " FH >4" FHJ " FHJ NOTE: bold type shows supplied arm 7

8 dormakaba 7300 surface applied door closer Top jamb heavy-duty cushion arm ISJ/ISJH (>3-1/'' to 6-1/'' reveal) NOTE: Use IS for reveal 3-1/" (48) 5/8 (16) Stop -1/4 (57) 1-1/ (318) 3-1/4 (83) Minimum ceiling clearance (No cover, COV) Reveal 4-1/" 4-1/" Butt hinges Minimum frame face for mounting closer 1-5/8" '-0" min. '-6" Interior N/A N/A Exterior N/A N/A * /" (165) /4" (146) /" (140) /4" (3) 105 5" (17) /4" (11) Dim "A" Dim "B" Reveal Arm 1-5/8" (31) 1-1/8" (308) 11-3/4" (98) 11-1/4" (86) 11" (79) 10-3/4" (73) 0" 3-1/" IS >3-1/" 6-1/" ISJ " 3-1/" IS >3-1/" 6-1/" ISJ " 3-1/" IS >3-1/" 6-1/" ISJ " 3-1/" IS >3-1/" 6-1/" ISJ " 3-1/" IS >3-1/" 6-1/" ISJ " 3-1/" IS >3-1/" 6-1/" ISJ * Hold Open is approximately 5 7 less than the maximum listed in the chart. NOTE: bold type shows supplied arm. Top jamb extra heavy-duty spring cushion arm SISJ/SISJH (>3-1/'' to 6-1/'' reveal) NOTE: Use IS for reveal 3-1/ (48) 3-1/4 (83) Minimum ceiling clearance (No cover, COV, FC) 5/8 (16) Stop 3-9/16 (90) 14-1/8 (359) Reveal 4-1/" 4-1/" Butt hinges Minimum frame face for mounting closer 1-3/4" '-0" min. '-6" Interior N/A N/A Exterior N/A N/A * /" (16) /8" (00) 100 7" (178) /8" (16) Dim "A" Dim "B" Reveal Arm 11-1/16" (81) 10-7/16" (66) 9-9/16" (43) 8-15/16" (7) 0" 3-1/" SIS >3-1/" 6-1/" SISJ " 3-1/" SIS >3-1/" 6-1/" SISJ " 3-1/" SIS >3-1/" 6-1/" SISJ " 3-1/" SIS >3-1/" 6-1/" SISJ * Hold open is approximately 5 7 less than the maximum listed in the chart. NOTE: bold type shows supplied arm. 8

9 Technical Drawings Parallel round form arm ARP AO8P 7" (178) 4-5/8 (117) 4-3/4" (11) 3-1/ (89) (48) Minimum stop width Spacer block 5/8" or 1/" stop 7-1/ (190) 5/8 Stop (16) 1-1/8 (9) 1-1/8 (9) Minimum door rail for mounting closer 5-1/8" (5/8" stop shown). Minimum door rail to bottom of optional slim plastic cover 5-1/4" (5/8" stop shown) '-6" Interior Exterior N/A Template ref. maximum To " Minimum door width Parallel friction hold open FHP 3-1/ (89) Minimum stop width 1-1/8 (9) Spacer block 5/8" or 1/" stop 1-5/8 (41) 4-3/4 (11) (48) 7-3/8 (187) 5/8Stop (16) 4-1/" 4-1/" Butt hinges Minimum door rail for mounting closer 4-7/8" (5/8" stop shown). Minimum door rail to bottom of optional slim plastic cover 5-3/8" (5/8" stop shown) '-6" Interior Exterior N/A Template ref. Dim "A" To /4" (171) Over /4" (108) Dim "B" 9" (8) 6-1/" (165) maximum Minimum hold open hold open " " Minimum door width 9

10 dormakaba 7300 surface applied door closer Heavy-duty super parallel arm 7305 SPA/SPAT 4 (10) Minimum stop width Spacer block 5/8" or 1/" stop -3/8 (60) 1-1/8 (9) 4-3/8 (111) (48) 7-1/ (190) 4-1/" 4-1/" Butt hinges Minimum door rail for mounting closer 4-5/8" (5/8" stop shown). Minimum door rail to bottom of slim plastic cover 4-3/4" (5/8" stop shown). Size Selection Chart Exterior Door Width 7305 Interior N/A 7305 Exterior 7305 N/A Angle of Opening/ Hold Open To 100 H.O. 90 To 180 H.O. Dim "A" Dim "B" Opening 6-/16" (173) 3-3/16" (81) 9-1/8" (3) 5-1/" (140) Backcheck " " Minimum Door Width Parallel x heavy-duty door saver cushion arm 7305 DS 4 (10) Minimum stop width Spacer block 5/8" or 1/" stop -3/8 (60) 1-1/8 (9) 4-3/8 (111) (48) 7-1/ (190) 4-1/" 4-1/" Butt hinges Minimum door rail for mounting closer 4-5/8" (5/8" stop shown). Minimum door rail to bottom of slim plastic cover 4-3/4" (5/8" stop shown) Interior N/A 7305 Exterior 7305 N/A * /16" (183) /16" (160) /16" () /16" (100) Dim "A" Dim "B" 10" (54) 9-1/4" (35) 8" (03) 6-7/8" (175) " " " " Minimum door width 10

11 Technical Drawings Parallel x extra heavy-duty door saver spring cushion arm SDS 4 (10) 4-3/8 (111) 1/ () 7/8 () -1/4 (57) (48) Minimum stop width Spacer block 5/8" or 1/" stop 7-1/ (190) -3/8 (60) 1-1/8 (9) 4-1/" 4-1/" Butt hinges Minimum door rail for mounting closer 4-5/8" (5/8" stop shown). Minimum door rail to bottom of slim plastic cover 4-3/4" (5/8" stop shown) Interior N/A 7305 Exterior 7305 N/A * /16" (183) /16" (160) /16" () /16" (100) Dim "A" Dim "B" 10" (54) 9-1/4" (35) 8" (03) 6-7/8" (175) " " " " Minimum door width Track x pull side door mounted 7305 T 7305 TH (48) (COV) 3 (76) Minimum ceiling clearance (Right hand) / / (1) 1-1/4 (495) (3) 4-1/" 4-1/" Butt hinges Minimum frame face for mounting closer -7/8". Optional BP86T plate required for slim plastic cover. Specify hand. '-6" 7305 Interior N/A Exterior N/A N/A * /8" (98) /8" (98) 110-5/8" (67) 180-1/8" (54) Dim "A" Dim "B" hold open 9-5/8" (44) 8-5/8" (19) 6-3/4" (171) 4-1/8" (105) delayed action " " " " Minimum door width 11

12 dormakaba 7300 surface applied door closer Track x pull side frame mounted 7305 JT 7305 JTH Minimum frame face 1-3/8 (35) 19-1/ (495) /16 (1) 1-1/4 (3) (Right hand) -5/8 (67) (48) 4-1/" 4-1/" Butt hinges Minimum door rail for mounting closer -3/8". Minimum door rail to bottom of slim plastic cover -1/". '-6" 7305 Interior N/A Exterior N/A N/A Dim A" /8" (156) /8" (143) /8" (111) /8" (98) Dim "B" 8" (03) 7-1/" (191) 5-3/4" (146) 3-3/8" (86) hold open delayed action " " " " Minimum door width Track x push side soffit mounted 7305 PT 7305 PTH 5/8" (16) Stop (559) Minimum stop width 1-1/4 (3) /16 (1) (48) 3-7/8 (98) 4-1/" 4-1/" Butt hinges Minimum door rail for mounting closer 3-5/8" (5/8" stop shown). Minimum door rail to bottom of slim plastic cover 3-3/4" (5/8" stop shown). Dim "A" Dim "B" hold open delayed action Minimum door width /8" (111) 9-1/8" (3) " '-6" /8" (111) 7-1/" (191) " 7305 Interior N/A Exterior N/A N/A /8" (111) 5-1/" (140) " 1

13 Technical Drawings Track x flush push side door mounted 7305 FT BP86T 7305 FTH BP86T -3/16 (56) (48) 3-3/16 (81) Minimum ceiling clearance (slim plastic cover) -1/4 (57) 19-1/ (495) 1-11/16 (43) /16 (1) 1-1/4 (3) 4-1/" 4-1/" Butt hinges Minimum transom surface for BP74T or optional plates 1-/16". Optional BP86T plate required for slim plastic cover. '-6" 7305 Interior N/A Exterior N/A N/A 85 4-/16" (1) /16" (110) /16" (84) Dim "A" Dim "B" hold open 6-3/8" (16) 6-1/16" (154) 4-3/4" (11) delayed action " " " Minimum door width Round form arm (8 mm rod) Round form arm (10 mm rod) Round form arm (8 mm rod) Main arm Shoe and rod Adjusting arm Main arm Shoe and rod Adjusting arm Main arm Shoe and rod Adjusting arm 1 (305) 1 (305) 1 (305) AR Complete arm assembly, regular or top jamb mount (0" 4" [0 mm 10 mm] reveal), with 8 mm rod. ARP Parallel round form arm complete (Tri-Pack) (0" 4" [0 mm 10 mm] reveal). Parallel arm bracket included. ARJ Complete arm assembly (4" 8" [10 mm 03 mm] reveal) with 10 mm rod. Designed specifically for top jamb applications with deeper reveals. AO8 Complete secured elbow arm non-hold open assembly (0" 4" [0 mm 10 mm] reveal) with 8 mm rod. Optional arm with 7300 Series closers. AO8P Parallel round form arm secured elbow non-hold open complete (Tri-Pack) (0" 4" [0 mm 10 mm] reveal). Parallel arm bracket included.

14 dormakaba 7300 surface applied door closer Narrow profile arm (8 mm) Narrow profile arm (10 mm) Friction hold open arm Heavy-duty cushion arm Main Arm 1 (305) Adjusting Arm Main Arm 1 (305) Adjusting Arm 1-1/4 (3) Main Arm 1 (305) FH Shoe and Bar Adjusting Tube Main/ Connecting Arm 1-1/4 (3) -1/ (343) Shoe/ Adjusting Tube Bumper ARNP Complete arm assembly. Regular or top jamb mount. Permits installation on 1" (5 mm) frame face for regular mount with maximum pull-side reveal of 1/8" (3 mm). Can also be used top jamb (0" 4" [0 mm 10 mm] reveal) for narrow top door rails. ARNPP Complete arm assembly for parallel arm mount (Tri-Pack). (0" 4" [0 mm 10 mm] reveal). Parallel arm bracket included. ARNPJ Complete arm assembly for top jamb installations (4" 8" [10 mm 03 mm] reveal) for narrow top door rails. FH Friction hold open arm complete (0" 4" [0 mm 10 mm] reveal). FHJ Top jamb friction hold open arm complete (4" 8" [10 mm 03 mm] reveal). FHP Friction hold open arm complete (Tri-Pack) (0" 4" [0 mm 10 mm] reveal). Parallel hold open bracket included. FHM04 Friction hold open main arm and adjusting tube (0" 4" [0 mm 10 mm] reveal). FHM48 Friction hold open main arm and adjusting tube (4" 8" [10 mm 03 mm] reveal). FHSB Friction hold open shoe and bar. Provides a cushioned function for regular and top jamb applications at 85, 90, 95, 100, 105, and 110. IS Cushion arm complete (0" 3-1/" [0 mm 89 mm] reveal). ISJ Cushion top jamb arm complete (3-1/" 6-1/" [89 mm 165 mm] reveal). ISH Cushion hold open arm complete (0" 3-1/" [0 89 mm] reveal). ISJH Cushion top jamb hold open arm complete. (3-1/" 6-1/" [89 mm 165 mm] reveal). 14

15 Technical Drawings Extra heavy-duty spring cushion arm Heavy-duty super parallel arm Heavy-duty door saver cushion arm Spring Stop Door Saver Arm Main connecting arm 1-1/4 (3) 1 (305) Spring cushion shoe/adjusting tube Bumper 3/4 (19) 1 (305) 3/4 (19) Bumper 1 (305) 3/4 (19) Spring cushion 1 (305) Provides a spring cushion function for regular and top jamb applications at 85, 90, 100, and 110. SIS Spring cushion arm complete (0" 3-1/" [0 mm 89 mm] reveal). SISH Spring cushion hold open arm complete (0" 3-1/" [0 mm 89 mm] reveal). SISJ Spring cushion top jamb arm complete (3-1/" 6-1/" [89 mm 165 mm] reveal). SISJH Spring cushion top jamb hold open arm complete (3-1/" 6-1/" [89 mm 165 mm] reveal). Heavy-duty parallel arm. Available in non-hold open, thumb turn hold open, and hex key turn hold open. Units can be installed for maximum of 100 or 180. Hold open units will hold open at 90 or 15. is 180 (conditions permitting). Non-hold open arm illustrated. SPA Super parallel arm non-hold open. SPAT Super parallel arm thumb turn hold open. Heavy-duty parallel arm with cushioned function. Available in non-hold open, thumb turn hold open, and hex key turn hold open. Units can be installed to achieve either stop or stop and hold open at 85, 90, 100, and 110. is 110 (conditions permitting). Non-hold open arm illustrated. DS Door saver cushion arm non-hold open. DST Door saver cushion arm thumb turn hold open. BUMPER DS Door saver bumper only. Extra heavy-duty parallel arm with spring assisted cushion function. Available in non-hold open and thumb turn hold open. Units can be installed to achieve either stop at 85, 90, 100, and 110 or stop and hold open function. is 110 (conditions permitting). Non-hold open arm illustrated. SDS Door saver spring cushion arm. SDST Door saver spring cushion arm thumb turn hold open. S SPRING DS Spring assembly complete. Cushion/spring cushion arm accessories: SISM03 Cushion/spring cushion main arm and connecting arm. (0" 3-1/" [0 mm 89 mm] reveal). SISM36 Cushion/spring cushion top jamb main arm and connecting arm (3-1/" 6-1/" [89 mm 165 mm] reveal). ISST Cushion shoe and adjusting tube. BUMPER IS Cushion/ spring cushion urethane bumper. SISST Spring cushion shoe and adjusting tube. 15

16 dormakaba 7300 surface applied door closer Accessories Track arm Push side track arm Backplate Backplate 3/4 (19) 14-3/4 (375) 19-1/ (495) 3/4 (19) 15-3/4 (400) (559) (47) (330) -1/4 (57) Provides slide track function for improved aesthetics and vandal resistance. Units can be installed to provide 85, 90, 110, or 180 of door (conditions and application permitting). T Track arm complete. Can be used on pull-side T applications (closer on door, track on frame) and JT applications (track on frame, closer on door). Can also be used with FT flush transom applications (closer on transom, track on door). TH Track hold open arm complete. Can be used in same applications as T arm. Range of hold open and maximum varies with mounting application. PT86 Push-side track arm complete. Used with PT track applications (closer on door, track on soffit). PT86H Push-side track hold open arm complete. Used with PT track applications (closer on door, track on soffit). Backplate (330) -1/4 (57) BP73 For top jamb mount when overhead ceiling clearance is less than -1/4" (57 mm). Can also be used for regular mount to clear a mortised overhead stop/holder. Conversion plate (47) BP86 For top jamb mount with slim plastic cover when overhead ceiling clearance is less than -1/4" (57 mm). Can also be used for regular mount to clear a mortised overhead stop/holder. Drop Plate (47) 3-1/ (89) BP86T For use with pull-side track applications (closer on frame face, track on door) with slim plastic cover to permit installation on a standard " (51 mm) frame face. BP600C For regular, top jamb, or parallel arm mounts. Permits retrofit of 7300 Series to 8-9/3" hole spacing. Eliminates the need to remachine the door and frame. DP73 For top jamb mount to clear a surface applied stop/holder. Overhead ceiling clearance must be 1-3/4" (44 mm) or more. Permits parallel arm installation with minimum top door rail of -1/" (64 mm) for non-hold open, -3/4" (70 mm) for friction hold open applications (assuming 5/8" [16 mm] stop dimension). 16

17 Technical Drawings Drop plate Angle bracket Angle bracket Parallel arm bracket (330) 3-1/ (89) 3 (76) 9-7/8 3-1/ (89) -1/ (64) (330) 3-1/ (89) 3-5/8 (9) 1-1/8 (9) DP86 For top jamb mount with slim plastic cover to clear a surface applied stop/holder. Overhead ceiling clearance must be 1-3/4" (44 mm) or more. Permits parallel arm installation with minimum top door rail of -1/" (64 mm) for non-hold open, -3/4" (70 mm) for friction hold open applications (assuming 5/8" [16 mm] stop dimension). AB73 For installation of closers where top jamb applications are not practical due to low overhead ceiling clearance, narrow frame face or unusual trim conditions. This bracket can also be used to provide clearance for a surfaceapplied stop/holder. AB86 For installation of 7300 Series closers using a slim plastic cover. Used where top jamb applications are not practical due to low overhead ceiling clearance, narrow frame face or unusual trim conditions. This bracket can also be used to provide clearance for a surface-applied stop/holder. P86 Furnished optionally with 7300 Series non-hold open parallel arm applications. Parallel hold open bracket Parallel flush transom bracket Narrow Frame bracket Flush transom bracket 3-1/ (89) 4-3/4 (11) 1-5/8 (41) 3-1/ (89) 4-3/4 (11) -1/ (64) 3-1/8 (79) 1-5/8 (41) -1/4 (57) -1/ (64) 4 (10) -1/ (64) PHB Furnished with 7300 Series closer friction hold open parallel arm applications. PFT For all 7300 Series closer hold open and non-hold open parallel arm applications where flush transom conditions prohibit use of P86 or PHB bracket. NFHD For use with all DS and SPA applications where soffit width is 1-1/8" (9 mm) to 3-1/" (89 mm), prohibiting use of standard spacer block. NFHD bracket is used in lieu of block supplied with arm. FTHD For use with all DS and SPA applications where flush transom conditions prohibit normal installation of soffit bracket. 17

18 dormakaba 7300 surface applied door closer Mortised Jamb Bracket Parallel Drop Bracket Blade Stop Spacer Heavy-Duty Blade Stop Spacer -7/8 (73) 1-1/ (38) 1-1/8 (9) -1/4 (57) 3-1/ (89) 3-3/4 (95) 3 (76) -1/4 (57) 1 (5) 3-1/ (89) 1/ () 1 (5) 4 (10) 1/ () MJ For 7300 Series closers with regular mount non-hold open assemblies, where frame conditions will not permit use of the standard foot, e.g. molded or ornate trim. Permits use of parallel arm application between twin communicating doors where limited space prohibits use of the wider P86 bracket. PD For 7300 Series closer non-hold open parallel arm applications to clear a surface-applied stop/holder. BS For use with all 7300 Series P86, PD, and PHB applications installed on cased frames with applied blade stops. This block is used to provide adequate clearance for the blade stop. BSHD For use with all 7300 Series DS, DST, SDS, SDST, SPA and SPAT applications installed on cased frames with applied blade stops. This block is used in conjunction with the spacer furnished with the arm to provide adequate clearance for the blade stop. Slim Plastic Cover Sex Nuts SNB (330) -1/4 (57) 1-5/16 (33) SNB1 1-11/16 (43) COV Optional slim plastic cover. SNB1 Sex nuts with machine screws for 1-3/4" (44 mm) door. SNB Sex nuts with machine screws for 1-3/8" (35 mm) door. Required for use on unreinforced doors and wood or composite labeled fire doors for securely attaching hardware to the door. 18

19 19

20 dormakaba DORMA USA, Inc. Dorma Drive, Drawer AC Reamstown, PA Tel: Fax: DORMA Canada 1680 Courtney Park Drive, Unit Mississauga, Ontario L5T 1R4 Tel: Fax: DORMA Mexico Calle Sur 110 no. 63, Col. Tolteca México, D.F. Tel: ext. 10 ventasdhw.mx@dormakaba.com CT M USA