Maximum R.M.S continuous current through IN - rated current fuses ( A ) Catalog Number MR10RESSORT.

Transcription

1 MR 0 CI MR 0 MR - MR 0. Clips MR - MR 7 MR For Ferrule style Fuses ø SILVER-PLATED COPPER CLIPS: EXTREMELY HIGH THERMAL AND ELECTRIC CONDUCTIVITY MOUNTING TYPE: - SCREWING ON ISOLATORS - SCREWING ON BARS OR INSULATED BARS - WELDING ON P.C.B. (MR 0 CI) STAINLESS STEEL PRESSURE SPRINGS: HIGHLY RESISTANT TO SALT SPRAY Main Characteristics Designation MR 0 MR 0 CI MR MR 0 MR MR 7 MR Current rating IN( A ) 5 5 Maximum R.M.S continuous current through IN - rated current fuses ( A ) 5 5 Recommended copper cable section (mm ) MR 0 - MR 0 CI Catalog MR0RESSORT Designation MR 0 Ref. B09800 Weight (g) 7 Packaging 0 pieces 0. Catalog MR0RESSORTSP Designation MR 0 without connection Ref. C09899 Weight (g) 5,7 Packaging 0 pieces 9 Ø Catalog MR0RESSORTCI Designation MR 0 CI Ref. Y0987 Weight (g),5 Packaging 00 pieces FG7 /0

2 Clips For Ferrule style Fuses ø MR.5 Catalog MRSPRING Designation MR Ref. G09870 Weight (g) Packaging 0 pieces Ø.5 Ø.5 MR Catalog MR0RESSORT Designation MR 0. Ref. H Weight (g) 0 Packaging 0 pieces Ø.5 Ø.5 MR 7.5 Catalog MRSPRING Designation MR Ref. K0989 Weight (g) 0 Packaging 0 pieces Ø.5 Ø.5 MR 7 9. Catalog MR7RESSORT Designation MR 7 Ref. Y097 Weight (g) Packaging 0 pieces Ø 8 Ø.5 /0 FG75

3 Clips MR Ø 8.5 Ø.5 Catalog MRR Designation MR Ref. M0975 Weight (g) 85 Packaging piece All clips silver-plated copper with stainless steel springs. Mounting Instructions P.C.B. Drilling for MR0 CI clip (0 X 8 Size Fuse).7 to Clip Mounting x holes ø L A Alignment Fixing in position holes ø mm Fuse size 0 x 8 x 5 x 58 0 x 5 0 x 7 0 x 7 x 0 x 7 x A L Mounting of two elastic stop pins of mm dia. for fixing clips in position FG7 /0

4 SI SI SI with microswitch SI Bases for x5, x58 For Ferrules-type fuses Ø - SHOCK-PROOF MODULAR ASSEMBLY COMPLIANT WITH IEC 09- AND NF C 0 BASE MOUNTING WITH OR WITHOUT MICROSWITCH AND ISOLATING PARTITION PHENOLIC RESIN FOR BASIC APPLICATIONS (BASIC MODEL) SELF-EXTINGUISHABLE FIBERGLASS POLYESTER FOR TRACTION AND CORROSIVE ATMOSPHERE APPLICATIONS (SALT SPRAY-PROOF MODEL) Main Characteristics Model Phenolic resin (standard) SI SI Thermal current rating (Ith) A 5 A Maximum power losses W per phase W per phase Rated insulation voltage Ui AC or DC according VDE 00:55 - group C withstand 7 V Dielectric withstand tests R.M.S. voltage mn - 0 Hz 8 kv between phase and mass Voltage shock./µs Uimp. : impulse voltage as per IEC 097- between phase and mass Salt-spray proof fiber glass polyester SKI SKI A 5 A W per phase W per phase 7 V kv between phases and microswitch Connecting with mm max. width, 5mm max. thick terminal for SI and mm max. for SI * Only for the base. Accessories (partitions and microswitches) are not classified due to their lightness. between phases and microswitch Tests according to IEC 000 and 09 and NF C 00 Dry atmosphere and new fusegear Basic model Max. temperature ( C)/Relative Humidity (%): 0 C/95% - 0 C/80% - C/% If Holder must be kept off, a heating system fed during stop periods must be used. Purpose is to keep the temperature of cubicle at a level slightly higher than outdoor. Salt spray-proof model Moist tropical and equatorial climate. Corrosive atmosphere. SI and Partition wall 5 M Designation Ref. Catalog Weight (g) ø SI SKI Pack: pieces V 097 B 0970 SI: basic model - SK salt spray-proof model SI SKI Partition wall Designation Ref. Catalog Weight (g) 8 0 E - B E- For direct mounting, screw tightening torque = 0. mdan Pack: pieces FG78 /0

5 SI Bases for x5, x58 For Ferrules-type fuses Ø - SI and Partition wall M Designation Ref. Catalog Weight (g) ø SI SKI Pack: pieces Partition wall W0975 C097 SI: basic model - SK salt spray-proof model SI SKI 0 Designation Ref. Catalog Weight (g) 5 E - Pack: pieces B E- 0 8 For direct mounting, screw tightening torque = 0. mdan Remote sensing microswitch Microswitch type for SI Code Ref. Catalog Weight (g) Basic single microswitch salt spray-proof single microswitch Basic twin microswitch MC -5 FL -5 MCK -5 FL -5 MC -5 FL -9 D 05 T 0975 P Microswitch type for SI Code Ref. Catalog Weight (g) Basic single microswitch salt spray-proof single microswitch Basic twin microswitch MC -5 FL -5 MCK -5 FL -5 MC -5 FL -9 H055 R097 T05 0 Pack: piece POSSIBLE ASSEMBLING AFTER CONNECTING ON MODEL WITHOUT PARTITION WALL With manual reset reversing style microswitch 0A - V cos ϕ = 0. # and terminals must always be connected. Adapters for DIN-rail mounting Rail style Designation Ref. Cat. Top part Bottom part Color Weight (g) Pkg. Asymmetrical DIN EN 05 Symmetrical DIN EN 0 EF EF 5 EF Fixoméga FM L G 0970 K 0970 B 09 EF EF5 EF MIFIXOMEGAFM vis M vis M vis M vis M 5 vis M M center screw blue cream white stainless steel /0 FG79

6 CC, CCR CC 8x fuse holder Ith max. 5A - Un 00V for 8x fuses with or without blown-fuse indicator For Ferrule-type Fuses Ø Model with no indicator light Model with no indicator light screw-on rail mounting Poles Ref. Cat. Ref. Cat. Nb Mod N Y CC8N C797 CC8NR E5 CC8 M8 CC8R +N G55 CC8N Q9 CC8NR L CC8 R9780 CC8R L70 CC8 C58 CC8R +N Z788 CC8N V980 CC8NR CC 0x8 fuse holder Ith max. A - Un 0V for 0x8 fuses with or without blown-fuse indicator or striker Model with no indicator light Model with no indicator light screw-on rail mounting Poles Ref. Cat. Ref. Cat. Nb Mod N Y0 CC0N W CC0NR S570 CC0 F57 CC0R +N Y08 CC0N M5 CC0NR N0 CC0 M7 CC0R A8 CC0 A789 CC0R +N S7 CC0N D798 CC0NR CC x5 fuse holder Ith max. A - Un V for x5 fuses with or without blown-fuse indicator or striker Model with no indicator light Model with no indicator light screw-on rail mounting Poles Ref. Cat. Ref. Cat. Nb Mod N R95 CCN C087 CCNR,5 S978 CC Z07 CCR,5 +N D59 CCN T57 CCNR W98 CC Z08 CCR D00770 CC P0 CCR,5 +N V0 CCN B9 CCNR FG80 /0

7 CC, CCR For Ferrule-type Fuses Ø Ith max. 5A - Un V for x58 fuses with or without blown-fuse indicator or stiker Model with no indicator light Model with no indicator light screw-on rail mounting Poles Ref. Cat. Ref. Cat. Nb Mod N T8 CCN N7 CCNR X7 CC B7 CCR +N A CCN E799 CCNR G58 CC P8 CCR J55 CC C87 CCR +N N CCN S95 CCNR 8 Multi-pole assembly accessories Nb. of CC8x and CC0x8 CCx5 CCx58 Poles Ref. Cat. Ref. Cat. Ref. Cat. E0077 CC80ROASS C0 CCROASS P7 CCROASS 0* W05 CC80ROASS V9 CCROASS P7 CCROASS 0* D088 CC80ROASS Y8 CCROASS C79 CCROASS 0* Adapter for symmetrical A08 ADAP-RSCC80 F7700 ADAPCC F7700 ADAPCC 0* rail Dimensions D088 Mounting on symmetrical DIN rail with adapter. Wiring cross sections - CC8/CC0; x0 mm - CC; x5 mm - CC; x mm Screw-on mounting in back of panel Neutral tubes are systematically built in Weight of a single-pole model - 8x ; 5 g - 0x8 ; 8 g - x5 ; 0 g - x58 ; g A B C D E F G H I J K L M N CC8/ ,5 77,5 00 7,5-77,5 0,5 - CC. 5,5 CC. 7 7, , ,5 9 5, , 5, /0 FG8

8 CC, CCR CC 8x fuse holder Ith max. 5A - Un 00V for 8x fuses, with or without blown-fuse indicator For Ferrule-type Fuses Ø 8-0 Nb. of Model with no indicator light Poles Ref. Cat. Nb Mod N Z5 CCR80N C0079 CCR8 +N A870 CCR8N V7 CCR8 W7 CCR8 CC 0x8 fuse holder Ith max. A - Un 0V for 0x8 fuses, with or without indicator or striker Nb. of Model with no indicator light Poles Ref. Cat. Nb Mod N Z5 CCR80N N8 CCR0 +N H555 CCRNM X7 CCR0 Y7 CCR0 0 79,5 8 Direct mounting on symmetrical DIN rail Wire cross sections: x 0mm. Compact footprint. Insulated to IP 0 standard Single-pole weight - 8x ; 58g - 0x8 ; g Neutral tubes are systematically built in 7 8 7,5 With the indicator light a blown fuse can be quickly located if power is still on Assembly accessory Accessories Ref. Cat. CCR multi-pole assembly kit Z75 CMS80PAK * * per bag FG8 /0

9 MSC 8, MSC 0, USM, USCC For Ferrule-type Fuses Ø 8 with or without blown-fuse indicator MSC 8 fuse holder Ith max. 5A - Un 00V Model without blown fuse Model with blown fuse Poles indicator light indicator light Nb Mod Ref. Numbrer Cat. Ref. Numbrer Cat. N Q85 MSC80N T95 MSC8 F MSC8I +N B09 MSC8N R0 MSC8 W0 MSC8 +N C8 MSC8N Q8 MSC8 MSC 8 fuse holder Phase + Neutral ( mod.) Ith max. 5A - Un 00V Nb. of Model without blown fuse indicator light Poles Ref. Numbrer Cat. Numbrer Nb Mod +N F0077 MSC8NM +N J5 MSC8NM Assembly accessories Ref. Numbrer Cat. Numbrer -pole pin G55 MSCMSDMAASS 0* -pole pin Q5 MSCMSDMAASS 0* -pole pin A7 MSCMSDMAASS 0* * 0 per bag /0 FG8

10 MSC 8, MSC 0, USM, USCC For Ferrule-type Fuses Ø 0 with or without blown-fuse indicator or striker MSC 0 fuse holder no accessories Ith max. A - Un V Nb. of Model without blown fuse Model with blown fuse Poles indicator light indicator light Ref.number Cat. Ref. Cat. Nb Mod N Q85 MSC80N Q7 MSC0 W978 MSC0I +N C085 MSC0N D0 MSC0NI E MSC0 K55 MSC0I M559 MSC0 R MSC0I +N E79 MSC0N E0 MSC0NI F875 MSC0 MSC 0 fuse holder Phase + Neutral ( mod.) Ith max. A - Un V Nb. of Model without blown fuse Model with blown fuse Poles indicator light indicator light Ref.number Cat. Ref. Cat. Nb Mod +N Y07 MSC0NM C0 MSC0NMI +N S87 MSC0NM S MSC0NMI Assembly accessories Ref. Numbrer Cat. Numbrer -pole pin G55 MSCMSDMAASS 0* -pole pin Q5 MSCMSDMAASS 0* -pole pin A7 MSCMSDMAASS 0* Dimensions 78 5,5 59,5 5 7,5, ,5 70 Direct mounting on symmetrical DIN rail Indicator light (0/V)* Wiring cross sections: - single-pole: x mm - single-pole + neutral: x 0 mm Insulated to IP 0 standard Single-pole weight - 8x ; g - 8x - Ph + NM ; g - 0x8 ; g - 0x8 - Ph + NM ; 8 g * 0 per bag * With the indicator light a blown fuse can be quickly located if power is still on FG8 /0

11 MSC 8, MSC 0, USCC, USM For Ferrule-type Fuses ClassCC or Midget USCC fuse holder Ith max. 0A - Un 00V for CC class fuses Nb. of Model without blown fuse Model with blown fuse Poles indicator light indicator light Ref.number Cat. Ref. Cat. Nb Mod N W0 USN B USCC X9 USCCI P89 USCC D7008 USCCI M75 USCC Y808 USCCI +N G08 USCCN N959 USCCIN Q79 USCC E USCCI USM 0 fuse holders Ith max. A - Un 800VAC - 000VDC for 0 x 8 Midget fuses (-/" x /") Nb. of Model without blown fuse Model with blown fuse Poles indicator light indicator light Ref.number Cat. Ref. Cat. Nb Mod N W0 USN Y9 USM L USMI N75 USM Z809 USMI C858 USM Y7 USMI +N H09 USMN P959 USMIN R79 USM F USMI Assembly accessories Ref. Numbrer Cat. Numbrer -pole pin F0 USPTH 0* -pole pin C07 USPTH 0* -pole pin P8 USPTH 0* Dimensions * 0 per bag DIMENSION mm In A B C D E F G H I J.5.7 K L * With the indicator light a blown fuse can be quickly located if power is still on Direct mounting on symmetrical DIN rail Single-pole weight USCC ; 58g USM ; g /0 FG85

12 Modulostar Highlights General charateristics MODULOSTAR Series The brand-new innovative and comprehensive "MODULOSTAR " range of Ferraz Shawmut Modular Fuseholders and Fuse disconnectors is global and designed to accommodate a multitude of fuses from around the world, including - IEC industrial Cylindrical (gg, am, gd) - UL class CC, Midget - Special protection class (UR, gr, gd) in 5 sizes : 8x, 0x8, x5, x58 and 7x0 mm. All MODULOSTAR products are manufactured in accordance with IEC 09-, IEC &, UL5 and CSA - Standards. Impulse withstand voltages : - The range is tested at respectivly Uimp= KV and 8KV according to part 8... of IEC 097- between neighboring poles, between phase and wires, between phase and microswitch. Insulation voltage rating Ui = VAC and 800VAC - The blown fuse light indicators are available for VDC to 700VDC and 0VAC to -700VAC European RoHS Directive: Modulostar product range is develop in accordance with European Directive 00/95/CE dated 7 January 00, as free of halogene (PBB, PBDE), chlorine, mercury, cadmium and lead. Environmental aspects Modulostar range is design following "ecoconception" method, with sofware tool EIME (Environmental Information & Management Explorer), which takes into account the following criteria: Water Toxicity, Water Eutrophication, Hazardous Waste Production, Raw Material Depletion, Energy Depletion, Water Depletion, Global Warming, Air Toxicity, Photochemical Ozone Creation, Air Acidification Plastic material used are UL 9 V0 to V with UL Recognized Yellow card RTI ( Relative Thermal Index) > 0 C CTI ( Comparative Tracking Index) > V Bodies are in Polyamide with 0% reinforced material Handles are in Polyamide. with 5% reinforced material or in Thermodur BMC Homologations: CB report according IEC 09- and IEC 097- standards UL CSA Listed (00V AC) for class CC products ranges, UL CSA recognition ( 800V AC - 000V DC) for Midget and IEC products Vibration withstand: Tests with sine vibrations carried out at ambiant temperature with scanning each of the three main axis of the holder. Spectrum: st segment ( to Hz) constant displacement x=5mm peak nd segment ( to Hz) constant acceleration γ= 5g peak Exponential scanning speed: octave per minute. Duration : hours per axis. Climatic usage conditions: Modulostar is designed for temperate climates. For more severe climates we recommend the following: Maximum temperature 0 C 0 C 0 C C Maximum relative humidity 95% % 80% % Curent derating FG8 /0

13 Modulostar Highlights Fuse Overview Fuse ranges used in Ferraz Shawmut fusegear Class Size 0. x 8 / CC x 5 x 58 7 x 0 00V Class J Time delay AJT to 0A AJT to 0A 00V Class J Fast acting AJ to 0A AJ to 0A 00V Midget fast acting JX, ATM, SBS 0.5 to 0A 00V Class CC Time delay ATDR, ATQR, ATMR / to 0A 00V Class RK5 Time delay TR to 0A V Class RK Fast acting AK to 0A V Class K-5 OT, OTN to 0A V Class RK Time delay AD, to 0A 0V Midget Time delay ATQ 0. to 0A V-00V Midget OTM, TRM, A5Z- 0. to 0A 5V Midget Fast acting GGU, GFN to 0A 00V 5 to A 0V to A 0V 00 to 5A am 0V 0. to 0A V 0.5 to 0A V to 80A V 0. to or0a* 00V A 00V A 00V 5A gg 0V 0.5 to 5A 0V to 0A 0V 00A V 0.5 to or 0A* V to A V to 80A 0gD 00V 0 to 0A 00V 5 to 0A 00V 5 to 00A 00V to A 00V A 00V 5A V to 0A* gg with striker 0V to 0A 0V 80 to 00A V to A* V to 80A* am with striker 00V to A 0V to 5A 0V to 00A V to 0A* V 0 to 0A* V to 80A* UR 00V 0. to 0.8 V to A V 5 to 00A gr V to A V to A V 5 to 00A UR with striker 0V to 0A V to A V 5 to 00A V to V 000V to 70A gr with striker V to A V 5 to 00A 800V 8 to 0A I n maxi A A 5A 70A * development in progress /0 FG87

14 Modulostar CMS8 - CMS0 - US0 Electrical characteristics IEC fuse holders: CMS8 Nominal Voltage Ui AC/DC Voltage Isolation Uimp Nominal Current Max. power losses in the fuse links Fuse links rating Maxi RMS* Current for,, and +N poles with FS fuse links For, 5 and poles x by 0.9 For 7, 8, 9 poles x 0.8 For 0 poles x by 0,7 gg am gf / gg Cable wire section (mm ) recommanded 0V AC0B kv 5 A.5 W * Datas for ambiante temperature = 0 C. Wire range : Rigid wire = - mm (8 - AWG) Multistrand wire = 0,75-0 mm (8-8 AWG) Ferraz Shawmut recommands to use screwdrivers PZ or Flat 5.5 x mm (maximum diameter mm) Maximum Tightening Torque :.5 Nm (lb-in) IR for fuses : V MODULOSTAR Fuse holders for 8 x fuse links Pole Catalog MODULOSTAR Fuse holder without fuse light melting indicator Ref Mod. (7.5 mm) box of CMS80N CMS8 CMS8N CMS8 CMS8 CMS8N CMS8 D00 X000 Y00 Z00 A00 B00 C005 MODULOSTAR CMS8/0 NEUTRE MODULOSTAR CMS8 P MODULOSTAR CMS8 P+N MODULOSTAR CMS8 P MODULOSTAR CMS8 P MODULOSTAR CMS8 P+N MODULOSTAR CMS8 P Pole Catalog MODULOSTAR Fuse holder with fuse light melting indicator Ref Mod. (7.5 mm) box of CMS8I CMS8NI CMS8I CMS8I CMS8NI CMS8I E007 F008 G009 H00 J0 K0 MODULOSTAR CMS8 P C/I MODULOSTAR CMS8 P+N C/I MODULOSTAR CMS8 P C/I MODULOSTAR CMS8 P C/I MODULOSTAR CMS8 P+N C/I MODULOSTAR CMS8 P C/I Accessories Catalog references Mod. (7.5 mm) Maxi. RMS current (A) of poles Kit for Multi-Phase connection links Lock Tag and lockout jumping bars phase size 8/0 * jumping bars phases size 8/0 * jumping bars phases size 8/0 * jumping bars phases size 8/0 * phase lateral incoming power supply & phases lateral incoming power supply phase axial incoming power supply & phases axial incoming power supply CMS80PAK LOCK TAGLOCKCMS80 CMS80BBF CMS80BBF CMS80BBF CMS80BBF TBBC TBBC TBBA TBBA Z75 M55 A577 T00 V007 W008 X009 E0 G08 D05 F Note *: It is possible to use a rigid cable mm with a jumping bar.5 mm thick. FG88 /0

15 Modulostar CMS8 - CMS0 - US0 IEC fuse holders: CMS0 Electrical characteristics Nominal Voltage Ui AC/DC Voltage Isolation Uimp Nominal Current Max. power losses in the fuse links Fuse links rating Maxi RMS* Current for,, and +N poles with FS fuse links For, 5 and poles x by 0.9 For 7, 8, 9 poles x 0.8 For 0 poles x by 0,7 gg am URD / grb JX Cable wire section (mm ) recommanded V AC AC0B kv A W * Datas for ambiante temperature = 0 C. Wire range : Rigid wire = - mm (8 - AWG) Multistrand wire = 0,75-0 mm (8-8 AWG) Ferraz Shawmut recommands to use screwdrivers PZ or Flat 5.5 x mm (maximum diameter mm) Maximum Tightening Torque :.5 Nm (lb-in) IR for fuses : 0V - V MODULOSTAR Fuse holders for 0 x 8 fuse links Pole Catalog CMS80N CMS0 CMS0N CMS0 CMS0 CMS0N CMS0 MODULOSTAR Fuse holder without fuse light melting indicator Ref D00 T00 V0 W0 X0 Y0 Z05 MODULOSTAR CMS8/0 NEUTRE MODULOSTAR CMS0 P MODULOSTAR CMS0 P+N MODULOSTAR CMS0 P MODULOSTAR CMS0 P MODULOSTAR CMS0 P+N MODULOSTAR CMS0 P Mod. (7.5 mm) box of Pole Catalog MODULOSTAR Fuse holder with fuse light melting indicator Ref Mod. (7.5 mm) box of CMS0I CMS0NI CMS0I CMS0I CMS0NI CMS0 A0 B07 C08 D09 E00 F0 MODULOSTAR CMS0 P C/I MODULOSTAR CMS0 P+N C/I MODULOSTAR CMS0 P C/I MODULOSTAR CMS0 P C/I MODULOSTAR CMS0 P+N C/I MODULOSTAR CMS0 P C/I Accessories Catalog references Mod. (7.5 mm) Maxi. RMS current (A) of poles Kit for Multi-Phase connection links Lock Tag and lockout jumping bars phase size 8/0 * jumping bars phases size 8/0 * jumping bars phases size 8/0 * jumping bars phases size 8/0 * phase lateral incoming power supply & phases lateral incoming power supply phase axial incoming power supply & phases axial incoming power supply CMS80PAK LOCK TAGLOCKCMS80 CMS80BBF CMS80BBF CMS80BBF CMS80BBF TBBC TBBC TBBA TBBA Z75 M55 A577 T00 V007 W008 X009 E0 G08 D05 F Note *: It is possible to use a rigid cable mm with a jumping bar.5 mm thick. /0 FG89

16 Modulostar CMS8 - CMS0 - US0 IEC fuse holders: US0 Electrical characteristics Nominal Voltage Ui AC/DC V AC AC0B Voltage Isolation Uimp Nominal Current Max. power losses in the fuse links kv 0 A W Fuse links rating Maxi RMS* Current for,, and +N poles with FS fuse links For, 5 and poles x by 0.9 For 7, 8, 9 poles x 0.8 For 0 poles x by 0,7 JX URD / grb ATM, SBS, GNF, GGU ATQ, OTM, TMR Cable wire section (mm ) recommanded.5.5 Note: UL recognized Voltage are 800V AC and 000V DC * Datas for ambiante temperature = 0 C. Wire range : Rigid wire = - mm (8 - AWG) Multistrand wire = 0,75-0 mm (8-8 AWG) Ferraz Shawmut recommands to use screwdrivers PZ or Flat 5.5 x mm (maximum diameter mm) Maximum Tightening Torque :.5 Nm (lb-in) IR for fuses : 0V IEC - V IEC V UL MODULOSTAR Fuse holders for Midget and 0 x 8 fuse links MODULOSTAR Fuse holder without fuse light melting indicator Catalog Pole Ref US0N US0 US0N US0 US0 US0N US0 H05 B0 C05 D05 E05 F05 G055 MODULOSTAR US0 NEUTRE MODULOSTAR US0 P MODULOSTAR US0 P+N MODULOSTAR US0 P MODULOSTAR US0 P MODULOSTAR US0 P+N MODULOSTAR US0 P Mod. (7.5 mm) box of Pole Catalog MODULOSTAR Fuse holder with fuse light melting indicator Ref Mod. (7.5 mm) box of US0I US0NI US0I US0I US0NI US0I J057 K058 L059 M00 N0 P0 MODULOSTAR US0 P C/I MODULOSTAR US0 P+N C/I MODULOSTAR US0 P C/I MODULOSTAR US0 P C/I MODULOSTAR US0 P+N C/I MODULOSTAR US0 P C/I Accessories Kit for Multi-Phase connection links Lock Tag and lockout jumping bars phase size 8/0 * jumping bars phases size 8/0 * jumping bars phases size 8/0 * jumping bars phases size 8/0 * phase lateral incoming power supply & phases lateral incoming power supply phase axial incoming power supply & phases axial incoming power supply Catalog US80PAK LOCK TAGLOCKUS80 US80BBF US80BBF US80BBF US80BBF TBBC TBBC TBBA TBBA references Z75 M55 A577 T00 V007 W008 X009 E0 G08 D05 F07 Mod. (7.5 mm) Maxi. RMS current (A) of poles Note *: It is possible to use a rigid cable mm with a jumping bar.5 mm thick. FG /0

17 Modulostar CMS8 - CMS0 - US0 CMS8 & 0, US0 Dimensions Accessories Kit for Multi-Phase connection links Lock Tag and lockout jumping bars phase size 8/0 * jumping bars phases size 8/0 * jumping bars phases size 8/0 * jumping bars phases size 8/0 * phase lateral incoming power supply & phases lateral incoming power supply phase axial incoming power supply & phases axial incoming power supply Catalog CMS80PAK LOCK TAGLOCKCMS80 CMS80BBF CMS80BBF CMS80BBF CMS80BBF TBBC TBBC TBBA TBBA references Z75 M55 A577 T00 V007 W008 X009 E0 G08 D05 F07 Mod. (7.5 mm) Maxi. RMS current (A) of poles Note *: It is possible to use a rigid cable mm with a jumping bar.5 mm thick. /0 FG9

18 New USCC (UltraSafe) Electrical characteristics UL fuse holders: USCC Nominal Voltage Ui AC/DC Voltage Isolation Uimp Nominal Current 00V AC kv 0 A W Note: UL Listed 00V AC * Datas for ambiante temperature = 0 C. Max. power losses in the fuse links Fuse links rating Maxi RMS* Current for,, and +N poles with FS fuse links For, 5 and poles x by 0.9 For 7, 8, 9 poles x 0.8 For 0 poles x by 0,7 ATDR ATM ATMR Cable wire section (mm ) recommanded.5 Wire range : Rigid wire = - mm (8 - AWG) Multistrand wire = 0,75-0 mm (8-8 AWG) Ferraz Shawmut recommands to use screwdrivers PZ or Flat 5.5 x mm (maximum diameter mm) Maximum Tightening Torque :.5 Nm (lb-in) IR with UL Class CC fuse links : 00V ULTRASAFE Fuse holders for Class CC fuse links Pole Catalog ULTRASAFE TM Fuse holder without fuse light melting indicator Ref Mod. (7.5 mm) box of USCC USCC USCC USCC USCCN USCCN H0 K05 L0 N08 J0 M07 ULTRASAFE TM CC P ULTRASAFE TM CC P ULTRASAFE TM CC P ULTRASAFE TM CC P ULTRASAFE TM CC P+N ULTRASAFE TM CC P+N Pole Catalog ULTRASAFE TM Fuse holder with fuse light melting indicator Ref Mod. (7.5 mm) box of USCCI USCCI USCCI USCCI USCCNI USCCNI P09 R0 S0 V0 Q00 T0 ULTRASAFE TM CC P C/I ULTRASAFE TM CC P C/I ULTRASAFE TM CC P C/I ULTRASAFE TM CC P C/I ULTRASAFE TM CC P+N C/I ULTRASAFE TM CC P+N C/I Accessories Catalog references Mod. (7.5 mm) Maxi. RMS current (A) of poles Kit for Multi-Phase connection links Lock Tag and lockout jumping bars phase size 8/0 * jumping bars phases size 8/0 * jumping bars phases size 8/0 * jumping bars phases size 8/0 * phase lateral incoming power supply & phases lateral incoming power supply phase axial incoming power supply & phases axial incoming power supply CMS80PAK LOCK TAGLOCKCMS80 CMS80BBF CMS80BBF CMS80BBF CMS80BBF TBBC TBBC TBBA TBBA Z75 M55 A577 T00 V007 W008 X009 E0 G08 D05 F Note *: It is possible to use a rigid cable mm with a jumping bar.5 mm thick. FG9 /0

19 New USCC (UltraSafe) UL fuse holders: USCC Dimensions Accessories Kit for Multi-Phase connection links Lock Tag and lockout jumping bars phase size 8/0 * jumping bars phases size 8/0 * jumping bars phases size 8/0 * jumping bars phases size 8/0 * phase lateral incoming power supply & phases lateral incoming power supply phase axial incoming power supply & phases axial incoming power supply Catalog CMS80PAK LOCK TAGLOCKCMS80 CMS80BBF CMS80BBF CMS80BBF CMS80BBF TBBC TBBC TBBA TBBA references Z75 M55 A577 T00 V007 W008 X009 E0 G08 D05 F07 Mod. (7.5 mm) Maxi. RMS current (A) of poles Note *: It is possible to use a rigid cable mm with a jumping bar.5 mm thick. /0 FG9

20 Modulostar USFM0, UltraSafe TM USFMM Nominal Voltage Ui AC/DC V IEC 00V UL AC0B Three poles fuse holders and fuse disconnectors: USFM0 / USFMM Electrical characteristics Voltage Isolation Uimp Nominal Current Max. power losses in the fuse links kv A W Fuse links rating JX ATM, SBS, GNF, GGU 0 5 ATQ, OTM, TMR URD / grb 9 5 Cable wire section (mm ) recommanded * Datas for ambiante temperature = 0 C. Wire range : Rigid and Multistrand wire = - mm (8-0 AWG) - Mulistrand wire mm (9 AWG) with strands repartition between each part of scew - Maximum multistrand wire for each open lug =. mm ( AWG) Maximum Tightening Torque :.5 Nm ( lb-in) Ferraz Shawmut recommands to use screwdrivers PZ or Flat 5.5 x 0.8 mm (maximum diameter mm) IR with fuses : 0V IEC - V IEC V UL MODULOSTAR USFM0 for IEC 0x8 fuse links Pole / Width poles system / 5 mm width Catalog USFM0 USFM0M USFM0I USFM0MI Maxi RMS* Current for Three poles system with FS fuse links. For to 7 Three poles systems x by 0.9 MODULOSTAR USFM Fuse holder and Fuse disconnector Ref S075 T07 W078 V077 USFM0 FUSE HOL P V A EU USFM0M FUSEHOL+MCPVA EU USFM0I FUS.HOLP+V VA EU USFM0MI FUS.HOLP+MC+VV EU Pack: piece Fuse holder is without Prebreaking Microswitch (see accessories) Fuse disconnector is with mounted Prebreaking Microswitch ULTRASAFE USFMM for Midget and IEC 0x8 fuse links Pole / Width poles system / 5 mm width Catalog USFMM USFMMM USFMMI USFMMMI Ref D0775 E077 G0778 F0777 ULTRASAFE TM USFM Fuse holder and Fuse disconnector USFMM P 00V 0A UL USFMMM P 00V 0A +MS UL USFMMI P 00V 0A +LIGHT UL USFMMMI P 00V 0A +LI+MS UL Pack: piece Fuse holder is without Prebreaking Microswitch (see accessories) Fuse disconnector is with mounted Prebreaking Microswitch Fonction Fuse Fuse holder disconnector w/o Indicator w/o Indicator with Indicator with Indicator Fonction Fuse Fuse holder disconnector w/o Indicator w/o Indicator with Indicator with Indicator Accessories Lock Microswitch Additional Neutral jumping bars phases Lateral incoming power supply Axial incoming power supply Interconnexion with SEI 0A Contactor Interconnexion with Rockwell 0A Contactor Interconnexion with SIEMENS 0A Contactor Interconnexion with ABB 0A Contactor Interconnexion with GE 0A Contactor Catalog LOCK USFMAC TBBC TBBA references M55 C0797 G08 F07 of systems interconnected Maxi. RMS current (A) of poles FG9 /0

21 Modulostar USFM0, UltraSafe TM USFMM USFM 0 - USFMM Dimensions Accessories Lock Microswitch Additional Neutral jumping bars phases Lateral incoming power supply Axial incoming power supply Interconnexion with SEI 0A Contactor Interconnexion with Rockwell 0A Contactor Interconnexion with SIEMENS 0A Contactor Interconnexion with ABB 0A Contactor Interconnexion with GE 0A Contactor Catalog LOCK USFMAC TBBC TBBA references M55 C0797 G08 F07 of systems interconnected Maxi. RMS current (A) of poles /0 FG95

22 Modulostar USFM0, UltraSafe TM USFMM USFM0, USFMM Ferraz Shawmut Fuse usable in USFM* for Motors protection P. Motor Motor Ie Voltage Motor AM CC GD JTD IEC fuse links UL listed UL recognized UL Listed 0A 00/5V 9A am 0.0* CC 5* 0 gd. AJT7.5 kw 0V 7A am 0.8* CC * 0 gd.0 AJT5 V 5A 9 am 0.,* AJT0 00/5V am 0.* CC 0* 0 gd.8 AJT0 5.5 kw 0V 0 am 0.* CC 7* 0 gd.5 AJT7.5 V 7 9 am 0.8* AJT5 00/5V am 0.0* CC 5* 0 gd.5 AJT5 7.5 kw 0V am 0.* CC 5* 0 gd.0 AJT0 V 9 9 am 0.0* AJT7.5 kw 00/5V am 0.5* 0 gd.0 AJT0 kw 0V 0 am 0.5* CC 0* 0 gd.8 AJT5 0 kw V 9 am AJT0 00/5V 0 0 am gd.5 AJT0 5 kw 0V 5 am gd.0 AJT5 V 8 9 am AJT0 8 kw 00/5V 7 am gd.55 to 0V 0 am gd.5 AJT0 0 kw V 9 am AJT5 kw 00/5V am gd kw 0V 8 am gd. --- kw V 5 9 am AJT5 8 kw 00/5V 5 am gd kw 0V 7 am gd kw V 0 9 am AJT0 kw 00/5V 0 am gd kw 0V 55 am gd kw V 9 am AJT0 0 kw 00/5V 7 am gd kw 0V 7 am kw V 9 am kw 00/5V 85 am kw 0V 80 am kw V 9 9 am * Respectively in USFM0-USFCC FG9 /0

23 USFMCC (UltraSafe TM ) Electrical characteristics UL three poles fuse holders: USFMCC Nominal Voltage Ui AC/DC Voltage Isolation Uimp Nominal Current Max. power losses in the fuse links Fuse links rating Maxi RMS* Current for USFM with FS fuse links For to 7 USFM x by 0.9 ATDR ATM ATMR Cable wire section (mm ) recommanded 00V AC 8 kv 0 A W * Datas for ambiante temperature = 0 C. Wire range : Rigid and Multistrand wire = - mm (8-0 AWG) - Mulistrand wire mm (9 AWG) with strands repartition between each part of scew - Maximum multistrand wire for each open lug =. mm ( AWG) Maximum Tightening Torque :.5 Nm ( lb-in) Ferraz Shawmut recommands to use screwdrivers PZ or Flat 5.5 x 0.8 mm (maximum diameter mm) IR with UL Class CC fuse links : 00V ULTRASAFE TM USFMCC for Class CC fuse links Pole / Width poles system / 5 mm width Catalog USFMCC USFMCCM USFMCCI USFMCCMI Ref P07 B079 Q07 R07 ULTRASAFE TM USFM Fuse holder and Fuse disconnector USFMCC POLES 00V 0A UL USFMCCM POLES 00V 0A+M UL USFMCCI POLES 00V 0A LIGHT USFMCCMI POLES 00V 0A LI+MC Pack: piece Fuse holder is without Prebreaking Microswitch (see accessories) Fuse disconnector is with mounted Prebreaking Microswitch Fonction Fuse Fuse holder disconnector w/o Indicator w/o Indicator with Indicator with Indicator Accessories Lock Microswitch jumping bars phases Lateral incoming power supply Axial incoming power supply Interconnexion with SEI 0A Contactor Interconnexion with Rockwell 0A Contactor Interconnexion with SIEMENS 0A Contactor Interconnexion with ABB 0A Contactor Interconnexion with GE 0A Contactor Catalog LOCK USFMAC TBBC TBBA references M55 C0797 G08 F07 of systems interconnected Maxi. RMS current (A) of poles FG98 /0

24 USFMCC (UltraSafe TM ) USFMCC Dimensions Accessories Lock Microswitch Additional Neutral jumping bars phases Lateral incoming power supply Axial incoming power supply Interconnexion with SEI 0A Contactor Interconnexion with Rockwell 0A Contactor Interconnexion with SIEMENS 0A Contactor Interconnexion with ABB 0A Contactor Interconnexion with GE 0A Contactor Catalog LOCK USFMAC TBBC TBBA references M55 C0797 G08 F07 of systems interconnected Maxi. RMS current (A) of poles /0 FG99

25 USFMCC (UltraSafe TM ) USFMCC Ferraz Shawmut Fuse usable in USFM* for Motors protection P. Motor Motor Ie Voltage Motor AM CC GD JTD IEC fuse links UL listed UL recognized UL Listed 0A 00/5V 9A am 0.0* CC 5* 0 gd. AJT7.5 kw 0V 7A am 0.8* CC * 0 gd.0 AJT5 V 5A 9 am 0.,* AJT0 00/5V am 0.* CC 0* 0 gd.8 AJT0 5.5 kw 0V 0 am 0.* CC 7* 0 gd.5 AJT7.5 V 7 9 am 0.8* AJT5 00/5V am 0.0* CC 5* 0 gd.5 AJT5 7.5 kw 0V am 0.* CC 5* 0 gd.0 AJT0 V 9 9 am 0.0* AJT7.5 kw 00/5V am 0.5* 0 gd.0 AJT0 kw 0V 0 am 0.5* CC 0* 0 gd.8 AJT5 0 kw V 9 am AJT0 00/5V 0 0 am gd.5 AJT0 5 kw 0V 5 am gd.0 AJT5 V 8 9 am AJT0 8 kw 00/5V 7 am gd.55 to 0V 0 am gd.5 AJT0 0 kw V 9 am AJT5 kw 00/5V am gd kw 0V 8 am gd. --- kw V 5 9 am AJT5 8 kw 00/5V 5 am gd kw 0V 7 am gd kw V 0 9 am AJT0 kw 00/5V 0 am gd kw 0V 55 am gd kw V 9 am AJT0 0 kw 00/5V 7 am gd kw 0V 7 am kw V 9 am kw 00/5V 85 am kw 0V 80 am kw V 9 9 am * Respectively in USFM0-USFCC FG00 /0

26 Modulostar CMS, CMS Electrical characteristics Rated insulation voltage Ui AC/DC V AC 0 B Rated impulse withstand voltage Uimp Rated current Max. power dissipation per fuse 8 kv A 5 W Fuse rating * Values shown for 0 C ambient temperature CMS fuse holders for x5 fuses with no striker or with indicator light Poles N + N + N Cat.Num CMSN CMS CMSN CMS CMS CMSN CMS IEC fuse holders: CMS IEC fuse disconnectors: CMS gg am URD - URC URGA URGB grb glb Wiring: Rigid wire =.5-5 mm ( - AWG) - Multistrand wire: Maximum 5 mm ( AWG) Tightening torque:.5 Nm max / 0 lbs.in Ferraz Shawmut recommands to use screwdrivers PZ or Flat 5.5 x mm (maximum diameter mm). Fuse holders without indicator light Ref.Num N8 F9 E0 J05 J09 L8 G Maximum current in use for,, et +N poles with FS-fuses. for, 5 and poles, multiply by 0.8 for 7, 8, 9 x 0.7 and for 0 x 0. Mod. (7.5 mm) box of Poles + N + N CMSI CMSNI CMSI CMSI CMSNI Fuse holders without indicator light Cat.Num Ref.Num M00778 M08 C579 Z D7 Mod. (7.5 mm).5.5 Recommended wire cross-section (mm ) box of Auxiliary microswitch kit M87 Enlargement pin for auxiliary microswitch - F9 Auxiliary microswitch assembly pin J8 for x5 fuses with striker Standard ready for accessories Mod. Possible Functions Pole Ref.Num Cat.Num (7.5 mm) box of L5 CMSAC.5 Indicator light & blown fuse only CMS fuse disconnectors for all types of x5 fuses Pole Model without indicator Model with indicator light Model fitted with light ready for accessories ready for auxiliary microswitch auxiliary microswitch Cat.Num Ref.Num Ref.Num Cat.Num Cat.Num Ref.Num N N8.5 CMSP P7708 CMSM K5 CMSMI N N P9 * CMSP G99 CMSM R557 CMSMI K057 consult us CMSP N00779 CMSM T55 CMSMI D580.5 * CMSM Y8 CMSMI K N CMSNP F0 CMSNM L799 CMSNMI A * Two auxiliary microswitches (see instructions for mounting) The auxiliary microswitch function requires use of fuses with strikers. Accessories Auxiliary microswitch kit pole CMS Auxiliary microswitch kit poles CMS auxiliary microswitch kit poles CMS Auxiliary microswitch assembly pin (between kits) Enlargement pin for auxiliary microswitch Multi-pole assembly kit Indicator light kit Lock FG0 CMSW CMSW CMSW CMSPTH CMSBP CMSPAK CMSLHI LOCK * 0 per bag Model fitted with auxiliary microswitch & indicator light Cat.Num Ref.Num Cat.Num References M87 C9 D979 J8 F9 Z8 A55 M55 Mod. (7.5 mm) Mod. (7.5 mm) box of 0* 0* 0* /0

27 Modulostar CMS, CMS IEC fuse holders: CMS IEC fuse disconnectors: CMS Electrical characteristics Rated insulation voltage Ui AC/DC V AC 0 B CMS fuse holders for x58 fuses with no striker or with indicator light Poles N + N + N Accessories /0 Rated impulse withstand voltage Uimp Cat.Num CMSN CMS CMSN CMS CMS CMSN CMS Rated current Max. power dissipation per fuse 8 kv 5 A 9.5 W Fuse holders without indicator light Ref.Num M9 E8 L V5 Z8 Q7709 N87 Mod. (7.5 mm) Fuse rating box of gg am URD - URC URGA URGB grb glb * Values shown for 0 C ambient temperature. Wiring: Rigid wire =.5 - mm ( - AWG) - Multistrand wire: Maximum 5 mm ( AWG). Tightening torque: max..5 Nm - 5 lbs.in Ferraz Shawmut recommands to use screwdrivers PZ or Flat.5 x. mm (maximum diameter 7 mm). for x58 fuses with striker Pole Pole Standard ready for accessories Cat.Num Ref.Num Model without indicator light ready for accessories Cat.Num Ref.Num Mod. (7.5 mm) Model with indicator light ready for auxiliary microswitch Cat.Num Ref.Num + N + N Model fitted with auxiliary microswitch Cat.Num Ref.Num CMSNI CMSI CMSNI CMSI CMSI CMSNI CMSI FG H7 S558 Z7 M700 A8 Model fitted with auxiliary microswitch & indicator light Cat.Num Ref.Num N CMSN M9 CMSP G05 CMSM D9 A8 + N CMSNP M7 CMSMI * CMSP T559 CMSM E979 N70 consult us CMSP W57 CMSM Q70 CMSMI R770 * W57 CMSM H99 CMSMI B85 + N CMSNP A77 CMSNM P00780 CMSMI P87 8 CMSNMI 8 * Two auxiliary microswitches (see instructions for mounting) The auxiliary microswitch function requires use of fuses with strikers. box of CMSAC P088.5 Indicator light & blown fuse only CMS fuse disconnectors for all types of x58 fuses * 0 per bag Auxiliary microswitch kit pole CMS Auxiliary microswitch kit poles CMS auxiliary microswitch kit poles CMS Auxiliary microswitch assembly pin (between kits) Enlargement pin for auxiliary microswitch Multi-pole assembly kit Indicator light kit Lock Maximum current in use for,, et +N poles with FS-fuses. for, 5 and poles, multiply by 0.8 for 7, 8, 9 x 0.7 and for 0 x 0. Poles Cat.Num CMSW CMSW CMSW CMSPTH CMSBP CMSPAK CMSLHI LOCK Possible Functions References E58 L09 B J8 F9 Z8 A55 M Fuse holders without indicator light Cat.Num Ref.Num Mod. (7.5 mm) 8 Mod. (7.5 mm) Mod. (7.5 mm) box of box of 0* 0* 0* Auxiliary microswitch kit E58 Recommended wire cross-section (mm ) G05 D9 Enlargement pin for auxiliary microswitch - F9 Auxiliary microswitch assembly pin - J8

28 Modulostar CMS, CMS Mecanics for CMS & Dimensions of CMS and US products Width depending Nb poles 5 on nb. of 7.5 mm modules modules mm Dimensions of CMS and US products Width depending Nb poles 5 on nb. of 7.5 mm modules 8 0 modules mm FG0 /0

29 Modulostar CMS, CMS Mecanics for CMS & Locking system Locking reference: M55 Multipole assembly Assembly kit CMS & CMS : Z8 Assembly kit US : X797 US : F7958 Each bag of kits is sufficient for: 0 multipole assemblies 0 two-pole assemblies 5 three-pole assemblies NB: poles maximum in an assembly Mounting auxiliary microswitches four-pole assemblies Dismounting auxiliary microswitches Auxiliary microswitch functions Characteristics of the auxiliary microswitch MICRO Fuse melting: A fuse holder containing a fuse with a striker sends out a signal when the fuse element melts Min. voltage and current for operation 0VAC-DC - 00mA Rated current A AC and breaking capacity () at V A AC 0,A AC 0,A DC // M Pre-isolation: Presence: When the fuse holder opens Sends a signal when the holder is closed with no fuse in it Rated current and breaking A DC /DC capacity () at and V 5A AC A AC /DC 0,A DC () as per standard IEC 97-5 With the fuse in the handle closed state. No fuse Fuse blown Handle open /0 FG05

30 Modulostar CMS, CMS Microswitch options Mecanics for CMS & Auxiliary microswitches can only be mounted on previously prepared fuse disconnectors. Use of the auxiliary microswitch for fuse melting requires the use of fuses with strikers. auxiliary microswitch CMS (C9) - US (Z799) CMS (L09) - US (H7) or auxiliary microswitch CMS (M87+F9) CMS (E58+F9) US (Y798+F9) US (G9759+F9) auxiliary microswitches CMS (D979) - US (A7) CMS (B) - US (J79) independent auxiliary microswitches CMS ( x M87) CMS ( x E58) US ( x Y798) US ( x G7959) mechanically interconnected auxiliary microswitches CMS ( x M87+ x J8) CMS ( x E58+ x J8) US ( x Y798) + ( x J8) US ( x G7959) + ( x J8) NOTE: Do not fit with more than microswitches Supply wiring bars and terminals jumping bar for (CMS /US ) poles jumping bar for (CMS /US ) poles jumping bar for (CMS /US ) pole jumping bar for (CMS /US ) poles jumping bar for (CMS /US ) pole Single-pole terminal, side /-pole terminal, side Single-pole terminal, axial /-pole terminal, axial Cat. CMSBBF CMSBBF CMSBBF CMSBBF CMSBBF TBBC TBBC TBBA TBBA Ref. A0 Z0 Y00 C0 B0 E0 G08 D05 F07 Maximum acceptable RMS current (A) FG0 /0

31 Modulostar CMS, CMS Indicator light kit With the indicator light a blown fuse can be quickly located if power is still on Carefully remove the cover with screw drivers. Slip the indicator light s top insert into the rails, being careful not to twist the contact tabs. Put the cover back on Assembly precautions in multipole assemblies When fuse holders are side by side or very near each other (less than one module apart), they must be derated again, in addition to derating for temperature of 7.5 mm modules > 0 Derating factor None = /0 FG07

32 UltraSafe TM US, US UL fuse holders: US Electrical characteristics Rated insulation voltage Ui AC/DC Rated impulse withstand voltage Uimp Rated current Max. power dissipation per fuse Fuse rating 7 V 8 kv A,7 W * Values shown for 0 C ambient temperature. gg Maximum current in use for,, et +N poles with FS-fuses. for, 5 and poles, multiply by 0.8 for 7, 8, 9 x 0.7 and for 0 x 0. 0gD am URD - URC URGA URGB grb glb Wiring: Rigid wire =.5-5 mm ( - AWG) - Multistrand wire: Maximum 5 mm ( AWG) Tightening torque:.5 Nm max / 0 lbs.in Ferraz Shawmut recommands to use screwdrivers PZ or Flat 5.5 x mm (maximum diameter mm) Recommended wire cross-section (mm ) ULTRASAFE TM US fuse disconnectors for x5 fuses with no striker, or with indicator light or with striker X7 Pole N + N * * + N + N* * Model without indicator light ready for accessories Cat.Num Ref.Num USN US USN US US USN US S70 T7 Y75 C79 J795 Q79 Model with indicator light ready for auxiliary contact Cat.Num Ref.Num USI USNI USI USI USNI USI V7 Z7 D7 K79 R79 Model fitted with auxiliary contact Cat.Num Ref.Num USM USNM USM USM USM USM USNM USNM USM USM W7 A77 E79 G79 L797 N799 S79 V795 Model fitted with auxiliary contact & indicator light Cat.Num Ref.Num USMI USNMI USMI USMI USMI USMI USNMI USNMI USMI USMI X7 B78 F79 H79 M798 P7 T79 W79 Mod. (7.5 mm) * Two auxiliary microswitches (see instructions for mounting) The auxiliary microswitch function requires use of fuses with strikers box of Accessories Auxiliary contact kit Y798 Enlargement pin for auxiliary contact - F9 Auxiliary contact assembly pin J8 Auxiliary contact kit pole US Auxiliary contact kit poles US auxiliary contact kit poles US Auxiliary contact assembly pin (between kits) Enlargement pin for auxiliary contact Multi-pole assembly kit Indicator light kit Lock Cat.Num USMSW USMSW USMSW USPTH USBP USPAK CMSLHI LOCK References Y798 Z799 A7 J8 F9 X797 A55 M55 Mod. (7.5 mm) * 0* 0* * 0 per bag FG08 /0

33 UltraSafe TM US, US UL fuse holders: US Electrical characteristics Rated insulation voltage Ui AC/DC Rated impulse withstand voltage Uimp Rated current Max. power dissipation per fuse 7 V 8 kv 5 A 9.5 W Fuse rating / * Values shown for 0 C ambient temperature. gg Maximum current in use for,, et +N poles with FS-fuses. for, 5 and poles, multiply by 0.8 for 7, 8, 9 x 0.7 and for 0 x 0. 0gD am URD - URC URGA URGB grb glb Wiring: Rigid wire =.5 - mm ( - AWG) - Multistrand wire: Maximum 5 mm ( AWG). Tightening torque: max..5 Nm - 5 lbs.in Ferraz Shawmut recommands to use screwdrivers PZ or Flat.5 x. mm (maximum diameter 7 mm) C79 Recommended wire cross-section (mm ).5/ /0 /0 0/8 0/8 0/8 / 5/ 5/ 5/ ULTRASAFE TM US fuse disconnectors for x58 fuses with no striker, or with indicator light or with striker Pole N + N * * + N + N* * Model without indicator light ready for accessories Cat.Num Ref.Num USN US USN US US USN US B79 C79 G79 L7 S79 Z795 Model with indicator light ready for auxiliary contact Cat.Num Ref.Num USI USNI USI USI USNI USI D79 H797 M79 T797 A795 Model fitted with auxiliary contact Cat.Num Ref.Num USM USNM USM USM USM USM USNM USNM USM USM E79 J798 N79 Q79 V798 X79 B795 D795 Model fitted with auxiliary contact & indicator light Cat.Num Ref.Num USMI USNMI USMI USMI USMI USMI USNMI USNMI USMI USMI F795 K799 P79 R795 W799 Y795 C7955 E7957 Mod. (7.5 mm) * Two auxiliary microswitches (see instructions for mounting) The auxiliary microswitch function requires use of fuses with strikers box of F795 Accessories Auxiliary contact kit pole US Auxiliary contact kit poles US auxiliary contact kit poles US Auxiliary contact assembly pin (between kits) Enlargement pin for auxiliary contact Multi-pole assembly kit Indicator light kit Lock Cat.Num USMSW USMSW5 USMSW USPTH USBP USPAK CMSLHI LOCK References G7959 H7 J79 J8 F9 F7958 A55 M55 Mod. (7.5 mm) * 0* 0* * 0 per bag Auxiliary contact kit Y798 Enlargement pin for auxiliary contact - F9 Auxiliary contact assembly pin J8 /0 FG09

34 UltraSafe TM US, US Mecanics for US & Dimensions of CMS and US products Width depending Nb poles 5 on nb. of 7.5 mm modules modules mm Dimensions of CMS and US products Width depending Nb poles 5 on nb. of 7.5 mm modules 8 0 modules mm FG0 /0

35 UltraSafe TM US, US Mecanics for US & Locking system Locking reference: M55 Multipole assembly Assembly kit CMS & CMS : Z8 Assembly kit US : X797 US : F7958 Each bag of kits is sufficient for: 0 multipole assemblies 0 two-pole assemblies 5 three-pole assemblies NB: poles maximum in an assembly Mounting auxiliary microswitches four-pole assemblies Dismounting auxiliary microswitches Auxiliary microswitch functions Characteristics of the auxiliary microswitch MICRO Fuse melting: A fuse holder containing a fuse with a striker sends out a signal when the fuse element melts Min. voltage and current for operation 0VAC-DC - 00mA Rated current A AC and breaking capacity () at V A AC 0,A AC 0,A DC // M Pre-isolation: Presence: When the fuse holder opens Sends a signal when the holder is closed with no fuse in it Rated current and breaking A DC /DC capacity () at and V 5A AC A AC /DC 0,A DC () as per standard IEC 97-5 With the fuse in the handle closed state. No fuse Fuse blown Handle open /0 FG

36 UltraSafe TM US, US Microswitch options Mecanics for US & Auxiliary microswitches can only be mounted on previously prepared fuse disconnectors. Use of the auxiliary microswitch for fuse melting requires the use of fuses with strikers. auxiliary microswitch CMS (C9) - US (Z799) CMS (L09) - US (H7) or auxiliary microswitch CMS (M87+F9) CMS (E58+F9) US (Y798+F9) US (G9759+F9) auxiliary microswitches CMS (D979) - US (A7) CMS (B) - US (J79) independent auxiliary microswitches CMS ( x M87) CMS ( x E58) US ( x Y798) US ( x G7959) mechanically interconnected auxiliary microswitches CMS ( x M87+ x J8) CMS ( x E58+ x J8) US ( x Y798) + ( x J8) US ( x G7959) + ( x J8) NOTE: Do not fit with more than microswitches Supply wiring bars and terminals jumping bar for (CMS /US ) poles jumping bar for (CMS /US ) poles jumping bar for (CMS /US ) pole jumping bar for (CMS /US ) poles jumping bar for (CMS /US ) pole Single-pole terminal, side /-pole terminal, side Single-pole terminal, axial /-pole terminal, axial Cat. CMSBBF CMSBBF CMSBBF CMSBBF CMSBBF TBBC TBBC TBBA TBBA Ref. A0 Z0 Y00 C0 B0 E0 G08 D05 F07 Maximum acceptable RMS current (A) FG /0

37 UltraSafe TM US, US Indicator light kit With the indicator light a blown fuse can be quickly located if power is still on Carefully remove the cover with screw drivers. Slip the indicator light s top insert into the rails, being careful not to twist the contact tabs. Put the cover back on Assembly precautions in multipole assemblies When fuse holders are side by side or very near each other (less than one module apart), they must be derated again, in addition to derating for temperature of 7.5 mm modules > 0 Derating factor None = /0 FG

38 ST ST For Ferrule-type Fuses Ø IN ACCORDANCE WITH IEC 97- AND EN 097- OPERATION CLASS: AC0B IMPULSE WITHSTAND VOLTAGE: AND 8 kv (./ µs wave) WITH PRE-ISOLATING AND BLOWN-FUSE INDICATING MICROSWITCHES COMPLETE PROTECTION AGAINST TOUCHING OF LIVE PARTS PROTECTION DEGREE: IP X HIGH-PERFORMANCE ST RANGE COMPLIANT WITH THE NEW EUROPEAN VOLTAGE RATINGS (IEC ) U N 80- V AC/DC I N UP TO 5 A Main Characteristics Size ST AC Insulation voltage rating Ui (V) AC/DC (CEI) 700 (US) Impulse Current Fuse current Maximum fuse operating current withstand rating rating ( A ) voltage I N ( A ) I N ( A ) Uimp(kV)() gg am gr/ur URD/URC URGB/URGA grc All terminals silver-plated copper () Between close phases and phase and mass, between phases and microswitch as per IEC 97- gl Recommended copper wire gauge (mm ) Fire and fumes class NF F -0 I-F Mounting with a padlocking right side-handle for ST "D" Operation handle = 5 Operation handle with extended shaft = 5 to "FO" "FO" maxi. Designation (equipment + handle) ST IIIN FOFOD+CDELAT.D. ST IIIN FOFO+CDELAT.D. ST IIIN FOD+CDELAT.D. ST IIIN FO+CDELAT.D. ST III FOFOD+CDELAT.D. ST III FOFO+CDELAT.D. ST III FOD+CDELAT.D. ST III FO+CDELAT.D. Ref. M 09 N 09 P 095 Q 09 S 098 R 097 T 099 V 0 Qty. of «FO» Qty. of «D» Cat. FG /0

39 ST ST (for x58 fuses) "D" "FO" Unmovable screw clamp-type connections for wires: one conductor, multistrand or rigid wire: 5 mm two conductors, multistrand wire: mm two conductors, rigid wire : 5 mm Minimal section:.5 mm With tightening torque:.8 to.5 Nm Mounting: simple snap-mounting on standard symmetrical DIN-rail direct on board: two M screws with tightening torque to. Nm x Indication () Predisconnection () Poles Symbol Cat. Num Ref.Num Pck ST F08 5 & STFO M097 0 STID N STIFOD P099 0 STN D & STNFO E00 +N STND D09 55 STNFOD D057 N STN E07 & ST B & STFO R00 95 STD S00 STFOD T00 55 ST C & STFO W STD X STFOD Y STN E0 955 & STNFO A N STND B STNFOD C0 00 STD H () Reversing switch-style blown-fuse indication contacts (D model) () Reversing switch-style preisolating contacts (FO model) enabling control of protection device and opening of off load disconnector. Approvals Weight (g) Preisolating FO and blown fuse indication D switch characteristics AC insulation voltage rating (***) V V FO or D type Voltage/ current for certain operating «FO» 0 V/ ma «D» 0 V/0 ma Current rating 0 A 0 A /0 Hz * Between power circuit and microswitch terminals according to IEC 0 and 9 and NFC 00 (/0 Hz mn dry air). ** Between power circuit and microswitch terminals Uimp: impulse voltage according to IEC 97-. *** Between power circuit and microswitch terminals Mounting adapter Blue colored AF adapter (Ref. Q 0980) available for mounting on standard assymetrical DIN-rail (EN 05) and usable for all models. Supply wiring bars and terminals Interrupting rating AC voltage Inductive circuit : withstand Non-inductive current Current L/R = 5ms test 0V 0V V 0V 0V V (*) 0 A 0 A 7 A 0 A 8 A A 7.5 kv DC 5 A 0.5 A. A 0. A 7.5 kv Impulse voltage Uimp./ µs (**) 8 kv 8 kv ST er FO ème FO D open disconnector Connecting with. clips Wiring bar for x poles Size Wiring bar for x pole Size Single-pole terminal, side /-pole terminal, side Single-pole terminal, axial /-pole terminal, axial Catalog CMSBBF CMSBBF TBBC TBBC TBBA TBBA References C0 B0 E0 G08 D05 F07 Maximum acceptable RMS current (A) 5 5 /0 FG5

40 ST ST with ring pug connection Poles FO D Right Handle Designation Reference Catalog / / No ST Plage Type B B888 STRING / No ST D Plage Type B C9 STDRING / / ST II Plage Type B K087 STRING No ST II FOFOD Plage Type B L087 STFOFODRING ST II FOFOD Cde Lat. D Yes M0875 STLHFOFODRIN Plage Type B / / No ST III Plage Type B N087 STRING No ST III FOFOD Plage Type B P0877 STFOFODRING ST III FOFOD Cde Lat. D Yes Q0878 STLHFOFODRIN Plage Type B Yes ST IV FOFOD Cde Lat. D Plage Type B" M77 STLHFOFODRIN FG /0

41 Modulostar CMS7, UltraSafe TM US7 MODULOSTAR : CMS7 Fuse Disconnector ULTRASAFE TM : US7 Fuse Holder Conforms to the standards: UL 5 AND UL 80 CSA - N 9 EN 097- & (Class : AC0B) Rated insulation voltage Ui= 800VAC-DC Full protection against accidentally touching live parts. Protection degree : IP XB in accordance with the IEC standard 059. High performance, conforming to European standards (Attachment to DIN rail - Modular fuse-disconnector). The US7 models have c US approval. Electric Characteristics Insulation voltage Impulse Current Fuse Maxi fuse operating current (A) Recommended AC UI withstand voltage rating current rating 0V copper wire gauge 0gD 0V URQ-URSCC 0V-800VgRB 000V URB in V AC/DC Uimp (kv) I N (A) I N (A) URGD AWG mm 8 - WITHOUT DERATING WITHOUT DERATING WITHOUT DERATING WITHOUT DERATING WITHOUT DERATING WITHOUT DERATING (CEI) / (US) * * * Busbar and ring lug connection FG8 /0

42 Modulostar CMS7, UltraSafe TM US7 MODULOSTAR : CMS7 Fuse Disconnector ULTRASAFE TM : US7 Fuse Holder Designed for 7 x 0 mm ( /8 x / In.) ferrule fuses. (800V AC - DC, lth = A) New Improved Design Attractive design and colour Designed for all 7 x 0 ferrule fuses UR curve (class UR) gr curve (class gr) Class J (UL) The Only Fuse-Disconnector which Conforms to the Standard The only fuse-disconnector on the market that respects the pre-isolation time defined by the standard (EN097-:t >0 ms), when it is equipped with a microswitch. Ample Space for Wiring and Connection Standard wiring with a choice of either : One 5 mm cable (AWG) flexible or rigid, Two mm flexible cables (AWG), Wiring with B type connection plates for eye lugs (electronic market in the USA and Japan, global traction market). Blown Fuse Indicator The blown fuse indicator functions at between 00V and 800V AC and DC and is a standard part of the US 7 range. (Leak current less than 0.5mA) UL Approval The US 7 version has c US certification. File E57. Fire smoke resistance classification : IF in accordance with the standards NFF 0 and NFF 0 (US 7 version). The Only Fuse-Holder With IP 0 - The only fuse-holder/fuse-disconnector on the market that offers certified IP 0B (open and closed) - The only fuse-holder/fuse-disconnector on the market for this range of fuse (800V AC-DC A). Identification of Terminals The terminals are easy to identify due to the marker kit provided with the standard product. Blown Fuse Micro-Switch, Safe Pre-Isolation and fuse presence characteristics for the US7 version Rated and minimum use current : In= 5A, Imini= 00 ma Rated and minimum use voltage : Un= V, Umini= 0V Approvals : NC C NC C NO NO.8 mm connection terminals /0 FG9

43 Modulostar CMS7, UltraSafe TM US7 MODULOSTAR : CMS7 Fuse Disconnector ULTRASAFE TM : US7 Fuse Holder * Need of 5 mm distance between DIN rail and panel Versatile Methods of Mounting Option of mounting the fuse-holder with phase and neutral poles, as well as micro-switches, due to the connection accessories. Several Kinds of Attachment - With M screws, - 5 mm or 75 mm symmetric DIN rail*, - Asymmetric DIN rail with adapter (Ref. Q0980). Possibility of Using Connection Plates For a cable with a diameter greater than either a 5 mm rigid or flexible cable, or two mm flexible cables, the connection can be made using ring lug. Protection covers are provided with this series to safeguard against accidental contact. Connection to connection plates, for cables equipped with ring or fork-type lugs. Climatic Conditions of Use This range of products has been designed for use in temperate, tropical and equatorial climates, provided that the following temperature/humidity conditions are not exceeded: Maximum temperature C 0 0 Maximum relative humidity % Resistance to Vibrations Test with sinusoidal vibrations, scanning the three main axes of the holder. Spectrum : st segment (-Hz) constant displacement x = 5 mm peak nd segment (-Hz) constant acceleration γ = 5g peak Exponential scanning speed : octave per minute. Duration : hours per axis. 7x0 Fuses used Ranges U N I N Applications (, CP URGD 7.0 ) 0VAC to A Class ar - Protection of semiconductor equipment, (, CP URQ, URS 7.0 ) 0VAC to A e.g. Soft starters, static relays, or regulators. (8 CP grb ) 800VAC 8 to 0A Class gr - Protection of cables, semiconductor equipment and AC instrument circuits. (0 CP URB 7.0 ) 000VAC 5 to 70A Class ar - Protection of semiconductor equipment, e.g. Soft starters, static relays, regulators. (CC, CP glb 7.0 ) 0VDC 5 to 0A Protection of DC instrument circuits, traction auxiliary circuits, (CC, CP grb 7.0 ) 0VDC 0.8 to 5A DC fed converters. FG0 /0