Closure End Plates and Accessories
|
|
- Stella Watkins
- 5 years ago
- Views:
Transcription
1 COYOTE Origin of the Species COYOTE Closure Shell Kits " (152) x 22.0" (559) COYOTE Shell Kit " (216) x 22.0" (559) COYOTE Shell Kit Transition and Buffer Tube Storage Compartments "(152) x 22.0" (559) Transition Compartment Kit 8.5" (216)x 22.0" (559) Transition Compartment Kit 6.0" (152) x 22.0" (559) Loose Buffer Tube Storage Compartment Kit 6.0" (152) x 22.0" (559) COYOTE Express Organizer (for loose buffer tube applications) 8.5" (216) x 22.0" (559) Loose Buffer Tube Storage Compartment Kit 8.5" (216) x 22.0" (559) COYOTE Express Organizer (for loose buffer tube applications) Transition Tube Kit for fiber transition from top section of end plate to transition compartment Installation Materials C-Cement, 1 oz. tube C-Cement, 4 oz. can Moisture Blocking Sealant, 3 oz. tube LOCK-TAPE Sealant 1" (25) W x 15' (4 m) L Splice Protector, non-heat shrink 250/250 micron, pack of Fusion Splice Protector Holder Kit Mass Fusion Splice Protector, non-heat shrink, pack of mm Heat Shrink Splice Protector, pack of Felt strips (blue) 1 1 8" (29) x 9" (229), 6 strips Unitube Transition Compartment Loose Buffer Tube Storage Compartment Mounting Brackets/Supports Vertical Mount Bracket Adjustable Aerial Hanger Bracket Kit Manhole Support Bracket Kit Adjustable Aerial Hanger Brack et Vertical Mount Bracket Kit (for 6.0" (152) or 8.5"(216) COYOTE Closure or 6.0" (152) COYOTE PUP Closure)
2 COYOTE Closure Series COYOTE Origin of the Species COYOTE Closure End Plates and Accessories Strength Member Bracket Exterior Bond Braid Extended Strength Member Bracket Misc. Accessories Description(mm) Blank Kit Strength Member Bracket Kit - two per kit Extended Strength Member Bracket Kit - two per Kit Heat Shield for 6.0" (152) x 22.0" (559) COYOTE Closure Heat Shield for 8.5" (216) x 22.0" (559) COYOTE Closure Flame-Retardant Blanket for 6.0" (152) x 22.0" (559) COYOTE Closure Flame-Retardant Blanket for 8.5" (216) x 22.0" (559) COYOTE Closure Transition Tube Kit Used to transition fibers from the top section of the to the Transition Compartment COYOTE Closure Removal Tool Transport Tube Kit.135" ID: includes six 34" long transport with Hardened Adapter tubes, used to bring fi ber from transition compartment to splice tray Transport Tube Kit.25" ID: includes six 34" long transport with Hardened Adapter tubes, used to bring fi ber from transition compartment to splice tray Bonding and Grounding Kits Description External bond clip kit External bond braid kit External isolation terminal kit, includes (2) isolation terminals with 10" long #6 cable stub and splice sleeve External isolation terminal kit, includes (2) isolation terminals with 10" long #6 cable stub and quick disconnect Quick disconnect kit (2 per kit) External isolation connector for COYOTE Closures Fiber optic shield connector, RUS Listed 3M #4460-D/FO (1 per kit) Fiber optic shield connector for up to.5" (13mm) cable O.D. Fiber optic shield connector for.5" to.8" (13-20mm) cable O.D. Fiber optic shield connector for.8" to 1.6" (20-41mm) cable O.D. Adapter bracket kit for AT&T bond connector (4 per kit) Isolated ground kit for 0.27" to.31" (7-8mm) Strength member bracket isolation kit, includes (6) nylon washers and bushings Bonding Braid,.5" W x 7" L with (2) eyelets spaced 6" apart
3 COYOTE User options for COYOTE Closure Three-Section Ports Two ¾" (19 mm) Ports Cables up to 0.75" (19 mm) in di ameter ¾" (19 mm) Plug (Cat. No , two per kit) Note: Three-Section Six Port Kits in clude three 7 8" (22 mm) Plugs, two (2) ¾" (19 mm) Plugs and two Strength Member Brack ets. Three-Section Six Port (Cat. No ) 7/8 " 3/4 " 7/8 " 7/8 7/8 " " 3/4 " Four 7 8"(22 mm) Ports Cables up to 0.88" (22 mm) in di ameter Future Cable Port, 0.56" (14 mm) max. cable diameter 7 8" Plug Kit ( ) Two 1" (25 mm) Ports Cables up to 1.00" (21 mm) in diameter Future Cable Port, 0.81" (21 mm) max. cable diameter 1" Plug Kit ( ) Three-Section Four Port (Cat. No ) 1 " 1 " 1 1 /4 " 1 1 /4 " Two 1¼" (32 mm) Ports Cables up to 1.25" (32 mm) in diameter Future Cable Port, 1" (25 mm) max. cable diameter 1¼" Plug Kit ( ) 1" (25 mm) Ports Cables up to 1.0" (25 mm) in diameter Future Cable Port, 0.81" (21 mm) max. cable diameter 1" Plug Kit ( ) 3/4 " Two ¾" (19 mm) Ports Cables up to 0.75" (19 mm) in diameter ¾" Plug ( ) Two/Kit 1 " 3/4 "
4 COYOTE Closure Series COYOTE Future Cable Port Kit When installed during the initial assembly, Future Cable Ports allow for the addition of branch cables in the future with no disruption to the existing cables and the fi bers within them. COYOTE Closure End Plates and Accessories Future Cable Port Kits Description Future cable port kit for 7 8" Port, includes (1) cable port, (1) plug and (1) clamp Future cable port kit for 1" Port, includes (1) cable port, (1) plug and (1) clamp Future cable port kit for 1¼" Port includes (1) cable port, (1) plug and (1) clamp Future cable installation kit, includes LOCK- TAPE sealant, bead sealant and l-bracket Future cable port for 7 8" port plus installation kit ( ) Future cable port for 1" port plus installation kit ( ) Future cable port for 1¼" port plus installation kit ( ) Port Size Usage ¾" 7 8" 1.0" 1¼" Runt 6 Port 4 Port COYOTE Closure Grommets Installation Material Kits Grommets expand the capacity of the COY OTE Closure Three- Section s for applications with smaller diameter cables or insulated ground wires. The grommets are manufactured from a weather-resistant urethane material that is designed to ensure a tight and permanent seal. A Silicone Sealant is provided to lu bri cate the grom met and cables for easy in stallation Description 6 Port end plate kit, includes (1) end plate assembly, (1) full set of plugs and LOCK-TAPE sealing materials 4 Port end plate kit, includes (1) end plate assembly, (1) full set of plugs and LOCK-TAPE sealing materials Plug Kit for ¾" ports (2 per kit) Plug Kit for 7 8" ports (2 per kit) Plug Kit for 1.0" ports (2 per kit) Plug Kit for 1¼" ports (2 per kit) The entry holes in the multi-en try grom mets are covered with a thin layer of ure thane ma teri al to pro vide a choice of which entries are to be used for fu ture cable en tries. See Grommet charts on the following page.
5 COYOTE PLP (End Color) Hole Pattern Entries Factory Slit Single Port Grommets Accepted Cable Diameter Range inches (mm) Coyote Runt Standard and Expanded COYOTE 6 Port COYOTE 4 Port Port Sizes Port Sizes Port Sizes ¾" 1" ¾" 7 8" 1" 1¼"
6 COYOTE Closure Series COYOTE PLP (End Color) (Black) (Black) (Brown) (Brown) (Brown) Hole Pattern Entries Factory Slit 2 YES 3 YES 4 YES 6 NO 6 NO 6 YES 10 NO Multi-Port Grommets Accepted Cable Diameter Range inches (mm) ( ) ( ) (3-4.1) (3-4.1) (3-4.1) Coyote Runt Standard and Expanded Port Sizes COYOTE 6 Port Port Sizes COYOTE 4 Port Port Sizes ¾" 1" ¾" 7 8" 1" 1¼" COYOTE Closure End Plates and Accessories
COYOTE Closure. Origin of the Species. Key Features: PATENTED 1-14
COYOTE Closure Origin of the Species Size L (cm) W (cm) H (cm) 6.0" x 22" 22" (56) 8½" (22) 7" (18) 8.5" x 22" 22" (56) 10-3/4" (27) 9¼" (24) PATENTED Setting the bar against which all other fi ber closures
More informationCOYOTE. Retrofit Closure. Refinement of the Breed. COYOTE Retrofit Closure. The ideal Closure for replacement or expansion 1-29
COYOTE Retrofit Closure COYOTE Closure Series: Section 1 Refinement of the Breed The ideal Closure for replacement or expansion The COYOTE Retrofi t Closure contains a ver sa tile Fiber Management System
More informationCOYOTE Splice Case. Value conscious and benefit-packed: The COYOTE Splice. 2-2 (440)
COYOTE Splice Case Value conscious and benefit-packed: The COYOTE Splice The combines the field-proven performance of the PREFORMED Splice Case (stainless steel) with the high capacity and craft-friendly
More informationCOYOTE Splice Case. Value conscious and benefit-packed: The COYOTE Splice 2-2
COYOTE Splice Case Value conscious and benefit-packed: The COYOTE Splice The combines the field-proven performance of the PREFORMED Splice Case (stainless steel) with the high capacity and craft-friendly
More informationSection 1 COYOTE Closure Series
COYOTE Closure Series: Section 1 Section 1 COYOTE Closure Series Table of Contents COYOTE Closure Overview...1-2 COYOTE In-Line RUNT...1-4 COYOTE Terminal Closure...1-6 COYOTE Dome Closure...1-10 COYOTE
More informationSection 1 COYOTE Closure Series
COYOTE Closure Series: Section Section COYOTE Closure Series Table of Contents Page COYOTE Closure Overview...-2 COYOTE Splice Tray & Closure Capacity Charts...-4 COYOTE Closure...-7 COYOTE PUP Closure...-9
More informationSection 1 COYOTE Closure Series
COYOTE Closure Series: Section Section COYOTE Closure Series Table of Contents Page COYOTE Closure Overview...-2 COYOTE LCC (Low Count Closure)...-4 COYOTE Aerial Drop Closure...-5 COYOTE In-Line RUNT...-6
More informationCOYOTE CLOSURE ADOBE SERIES FOR UNDERGROUND, AERIAL, AND BURIED SPLICES 6.0" x 22" 8.5" x 22" (152.4 mm x mm mm x 558.
FEBRUARY 2000 COYOTE CLOSURE ADOBE SERIES FOR UNDERGROUND, AERIAL, AND BURIED SPLICES 6.0" x 22" 8.5" x 22" (152.4 mm x 558.8 mm 215.9 mm x 558.8 mm) Be sure to read and completely understand this procedure
More informationFeatures: Use the selection chart below to choose the Splice Case and splice tray organizer which meet the requirements for your application.
FIBERLIGN Organizers For s (Protected and ) and Mechanical s FIBERLIGN Fiber Optic Organizers are designed to help organize, secure, support and protect delicate optical fibers before, during and after
More informationSection 3 FIBERLIGN Closure Series
FIBERLIGN Closure Series: Section 3 Section 3 FIBERLIGN Closure Series Table of Contents Page FIBERLIGN s...3-2 FIBERLIGN Organizers...3-3 FIBERLIGN UNI-CLOSURE...3-8 FIBERLIGN Fiber Safe...3-11 FIBERLIGN
More informationCOYOTE Dome Closure 9.5" x 28" with Transition Tray for High Density Splice Applications
OCTOBER 2017 COYOTE Dome Closure 9.5" x 28" with Transition Tray for High Density Splice Applications Be sure to read and completely understand this procedure before applying product. Be sure to select
More informationBe sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application.
5 NOVEMBER 2010 COYOTE Dome 9.5 x 28 Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application. 1. 7. 2. 4. 10.
More informationCOYOTE Terminal Dome Closure 6.5" x 22"
FEBRUARY 2015 COYOTE Terminal Dome Closure 6.5" x 22" Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application.
More informationCOYOTE LCC (Low Count Closure)
PLP Feature Focus 2009 Preformed Line Products OCTOBER 2012 Film available at www.preformed.com COYOTE LCC (Low Count Closure) Be sure to read and completely understand this procedure before applying product.
More informationMARCH COYOTE 9.5 x 19 (292 mm x 509 mm) Terminal Dome Closure Kits
MARCH 2012 COYOTE 9.5 x 19 (292 mm x 509 mm) Terminal Dome Closure Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before
More informationCOYOTE 9.5" x 19" (292 mm x 509 mm) Dome Closure
AUGUST 2012 COYOTE 9.5" x 19" (292 mm x 509 mm) Dome Closure Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application.
More informationJANUARY 2015 NOMENCLATURE. TOOLS REQUIRED 3/8" & 7/16" Can wrench or socket 1/4 Nut driver or screwdriver Snips Fiber optic cable opening tools
JANUARY 2015 COYOTE Dome Closure 6-1/2" x 17" Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED TM product before application. 1 2
More informationCOYOTE Dome Closure 6.5" x 22" Kits. COYOTE Dome Closure 6.5" x 22" for Buffer Tube Applications. Includes: (2) Grommets, (1) Buffer
JANUARY 2015 COYOTE Dome Closure 6.5" x 22" Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application. 1 2 3 6
More informationSection 1 COYOTE Closure Series
COYOTE Closure Series: Section Section COYOTE Closure Series Table of Contents Page COYOTE Closure Overview...-2 COYOTE GLC (Ground Level Closure)...-4 COYOTE Dome Closure...-9 COYOTE In-Line RUNT...-0
More informationCOYOTE 9.5" x 19" (292 mm x 509 mm) Cross-Connect Dome Closure
AUGUST 2013 COYOTE 9.5" x 19" (292 mm x 509 mm) Cross-Connect Dome Closure Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED TM product
More informationCOYOTE Dome Cross-Connect Closure 6-1/2" x 22"
FEBRUARY 2015 COYOTE Dome Cross-Connect Closure 6-1/2" x 22" Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application.
More informationCOYOTE 28" GLC (Ground Level Closure) Complete Assembly Installation
NOVEMBER 2016 COYOTE 28" GLC (Ground Level Closure) Complete Assembly Installation Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED
More informationOFE-CLS-Type Outside Plant (OSP) Fiber Optic Closures Instructions
Instruction Sheet 860385855 Issue 3, June 2013 Uniprise Solutions OFE-CLS-Type Outside Plant (OSP) Fiber Optic Closures Instructions General Uniprise OFE-CLS-Type Outside Plant (OSP) Fiber Optic Closures
More informationCOYOTE STP (Service Termination Point)
March 2019 COYOTE STP (Service Termination Point) Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED TM product before application.
More information3000SC Fiber Optic Splice Closure
3000SC Fiber Optic Splice Closure Protect All Of Your Fiber Optic Splices From Harsh Outside Plant Environments Product Description Our 3000SC Fiber Optic Splice Closure is a sealed, reinforced thermoplastic
More informationSection 10 ARMADILLO Stainless Series
ARMADILO Stainless Series: Section 10 Section 10 ARMADILLO Stainless Series Table of Contents Page Series Overview...10-2 ARMADILLO Selection Guide...10-4 ARMADILLO Stainless Shell Kits...10-5 ARMADILLO
More informationCOYOTE STP (Service Termination Point)
JANUARY 2017 COYOTE STP (Service Termination Point) Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application.
More informationSJOF-BS604A Fiber Optic Splice Closure User Manual Rev.0
Fiber Optic Splice Closure VISSEM 1. Introduction 1.1 General VISSEM s SJOF-BS604A protects fiber optic splicing point in various installation conditions such as aerial, manholes, ducts, wall and direct
More informationChengdu Qianhong Communication Co., Ltd. Fiber Optic Splice Closure. GJS03-M8AX-JX-144D-Mechnical Sealing Way.
Fiber Optic Splice Closure GJS03-M8AX-JX-144D-Mechnical Sealing Way Specification GJS03-M8AX Catalogue General Introduction GJS03-M8AX-JX-144D dome Fiber Optic Splice Closure (FOSC) are mechanical sealing
More informationOpti-Guard Splice Enclosure
Opti-Guard Splice Enclosure The Opti-Guard Splice Enclosure from AFL offers an impressive spectrum of features which makes it the best selection for your splice protection needs. Its unique and flexible
More informationFOSC-400A4 INSTALLATION INSTRUCTION
FOSC-400A4 INSTALLATION INSTRUCTION TC-441-IP Rev A, Mar 2017 www.commscope.com Fibre Optic Splice Closure with integrated organiser system 1 General 1.1 The installation instruction describes the necessary
More informationSplice Trays. features and benefits. specifications. A LANscape. Solutions Product. Splice Capacity
features and benefits Metal trays powder coated Clear plastic covers Fiber loop retention Positive holding action specifications SPECIFICATION SHEET LAN-331-EN PAGE 1 Ruggedness and durability Fiber visibility
More information3M Fiber Optic Splice Closure 2178
3M Fiber Optic Splice Closure 2178 Product Number Size in. (mm) (L x W x H) Splice Configuration Cable Entry Ports Maximum Splice Capacity 2178-XSB 14.6 x 10.1 x 4.6 (369.8 x 256.5 x 117.3) 3 48 Single
More informationFOSC-100 B/H FOSC-100 B2/H
FOSC-100 B/H FOSC-100 B2/H INSTALLATION INSTRUCTION TC-273-IP Rev A, Mar 2017 www.commscope.com Fiber Optic Splice Closure with integrated organizer system 1 1 General 1.1 The installation instruction
More informationLSS1U-144/7 FIBER OPTIC SPLICE SHELF INSTALLATION GENERAL CUSTOMER SERVICES REFERENCES TOOLS REQUIRED
OFS Fitel LSS1U-144/7 Fiber Optic 636-99-103-1 Instruction Sheet Splice Shelf Installation COMCODE 845 866 474 LSS1U-144/7 FIBER OPTIC SPLICE SHELF INSTALLATION GENERAL This instruction sheet provides
More informationSNR-FOSC-D-T. Installation Manual SNR-FOSC-D-T. Dome Heat Shrinkable Seal Fiber Optic Splice Closure (FOSC)
(FOSC) SNR-FOSC-D-T Installation Manual 1. Scope of application This Installation Manual suits for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC), as the guidance of proper installation.
More informationFOSC-400D5 INSTALLATION INSTRUCTION. Fibre Optic Splice Closure with integrated organiser system
FOSC-400D5 INSTALLATION INSTRUCTION Fibre Optic Splice Closure with integrated organiser system 1 General 1.1 The installation instruction describes the necessary steps to install the FOSC-400D5. The
More informationFiber optic splice closure
FOSC-450A I N S T A L L A T I O N I N S T R U C T I O N TC-772-IP Rev A, Mar 2017 www.commscope.com Fiber optic splice closure Content 1 Introduction 2 General 2.1 Kit content 2.2 Tools 2.3 Accessories
More informationARMADILLO Overview. Born Tough... Bred Smart Tames Costs as Well as Nature. ARMADILLO Stainless: The ARMADILLO Stainless is your best choice when
ARMADILLO Overview Born Tough... Bred Smart Tames Costs as Well as Nature ARMADILLO Stainless: For over 30 years, our Stainless Steel Splice Case has been the industry standard, with millions of successful
More informationSection 10 ARMADILLO Stainless Series
ARMADILO Stainless Series: Section 10 Section 10 ARMADILLO Stainless Series Table of Contents Page Series Overview...10-2 ARMADILLO Selection Guide...10-4 ARMADILLO Stainless Shell Kits...10-5 ARMADILLO
More informationMini-OTE 400. Mini-OTE 400. Content 1 General 1.1 General product information 1.2 Cable types 1.3 Symbols in this guide.
Mini-OTE 400 INSTALLATION INSTRUCTION TC-1335-IP Rev C, March 2017 www.commscope.com Mini-OTE 400 Content 1 General 1.1 General product information 1.2 Cable types 1.3 Symbols in this guide 2 Tools Required
More informationSection 7 FIBERLIGN Hardware Accessories for OPGW and/or ADSS
FIBERLIGN Hardware Accessories for OPGW and/or ADSS: Section Section FIBERLIGN Hardware Accessories for OPGW and/or ADSS Table of Contents Page ADSS CORONA Coil...-2 FIBERLIGN Cable Abrasion Protector
More informationOptical Fiber Closure. Fuzzy Integral Closure for Optical Cable VSOF-RN402A VISSEM. Electronics Co., Ltd.
Optical Fiber Closure VSOF-RN402A VISSEM Electronics Co., Ltd. FTTH Closure for Optical Cable VSOF-RN402A Vissem s OF-RTC-RN402A protects fiber optic splicing joint in various installation conditions such
More informationCS Fiber Optic Splice Case. Instruction
3 2179-CS Fiber Optic Splice Case Instruction 2179-CS Fiber Optic Splice Case Description 1.0 General 1.1 The 3M 2179-CS Fiber Optic Splice Cases are closures that can be used in buried, underground, aerial,
More informationHorizontal Fiber Optic Splice Closure (FOSC) FOSC-GPJ-A024. Installation Manual
Horizontal Fiber Optic Splice Closure (FOSC) FOSC-GPJ-A024 Installation Manual 1. Scope of application This Installation Manual suits for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC),
More informationHeat Shrink closure Non - Pressurized & Pressurized RTSM Dome Closure RLSS RPBS Vault Closure Lead Sleeve Mechanical Closure Pillar Dp Jointing Kit
Cable Joint Products Heat Shrink closure Non - Pressurized & Pressurized RTSM Dome Closure RLSS RPBS Vault Closure Lead Sleeve Mechanical Closure Pillar Dp Jointing Kit Compound Splice Filling BOOK 1.indd
More informationFOSCHF Horizontal Fiber Optic Splice Closure
Pictures FOSCHF Horizontal Fiber Optic Splice Closure Characteristics Holds up to 48 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Integrated seal,
More informationSNR-FOSC-F. Dome Mechanical Seal Fiber Optic Splice Closure. Dome Mechanical Seal Fiber Optic Splice Closure (FOSC) SNR-FOSC-F. Installation Manual
(FOSC) SNR-FOSC-F Installation Manual 1. Scope of application This Installation Manual suits for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC), as the guidance of proper installation.
More informationINSTALLATION INSTRUCTIONS
TABLE OF CONTENTS GENERAL...2 SPECIFICATIONS...2 PACKAGE CONTENTS...2 PACKAGE CONTENTS: ACCESSORIES...3 REQUIRED TOOLS...3 ADD-ON COMPONENTS...3 CLOSURE MOUNTING...3 LOCK AND UNLOCK EXTERIOR DOOR...3 CABLE
More informationTHE SB01 SPLICE ENCLOSURE NOW INCLUDES A LID GASKET THAT DOES NOT REQUIRE RTV APPLICATION.
THE SB01 SPLICE ENCLOSURE NOW INCLUDES A LID GASKET THAT DOES NOT REQUIRE RTV APPLICATION. DO NOT APPLY RTV TO THE GASKET WHEN SEALING THE SB01 SPLICE ENCLOSURE. SEE SECTION 18 FOR UPDATED INSTRUCTIONS.
More informationSNR-FOSC-H. Dome Mechanical Seal Fiber Optic Splice Closure. Dome Mechanical Seal Fiber Optic Splice Closure (FOSC) SNR-FOSC-H. Installation Manual
(FOSC) SNR-FOSC-H Installation Manual 1. Scope of application This Installation Manual suits for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC), as the guidance of proper installation.
More informationB1-OPCL Installation Manual
Horizontal Fiber Optic Splice Closure (FOSC) B1-OPCL12192 Installation Manual 1. Scope of application This Installation Manual suits for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC),
More informationHorizontal Fiber Optic Splice Closure (FOSC) Installation Manual
Horizontal Fiber Optic Splice Closure (FOSC) Installation Manual 1. Scope of application Installation Manual for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC). The scope of application
More informationHSC-O1. Dome Mechanical Seal Fiber Optic Splice Closure (FOSC)
HSC-O1 Dome Mechanical Seal Fiber Optic Splice Closure (FOSC) Contents 1.Scope of application 2.Basic structure and configuration 3.Necessary tools for installation 4.Installation flow chart 5.The process
More informationGENUINE PARTS INSTALLATION INSTRUCTIONS
GENUINE PARTS INSTALLATION INSTRUCTIONS DESCRIPTION: APPLICATION: PART NUMBER: Hood Bug Deflector Pathfinder T99D5 9PJ0A KIT CONTENTS: Item Qty. A 2 Inner Clip A B 2 Outer Clip B C 2 Wing Clip C D 1 Hood
More informationDome Mechanical Seal Fiber Optic Splice Closure (FOSC) OT-8903-AE. Installation Manual
Dome Mechanical Seal Fiber Optic Splice Closure (FOSC) OT-8903-AE Installation Manual 1. Scope of application This Installation Manual suits for one of the Fiber Optic Splice Closure (Hereafter abbreviated
More informationSNR-FOSC-D. Dome Mechanical Seal Fiber Optic Splice Closure. Dome Mechanical Seal Fiber Optic Splice Closure (FOSC) SNR-FOSC-D. Installation Manual
(FOSC) SNR-FOSC-D Installation Manual 1. Scope of application This Installation Manual suits for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC), as the guidance of proper installation.
More informationOFS LSS1U-864/ Instruction Sheet Fiber Optic Comcode: Splice Shelf Installation
OFS LSS1U-864/9 636-299-103-49 Instruction Sheet Fiber Optic Comcode: 848 461 620 Splice Shelf Installation LSS1U-864/9 FIBER OPTIC SPLICE SHELF INSTALLATION GENERAL This instruction sheet provides procedures
More information8400 Series Fiber Distribution System
8400 Series Fiber Distribution System Instructions January 1997 34-7041-4699-1-A 1 Contents: 1.0 General... 3 2.0 System Components... 4 3.0 System Engineering... 5 4.0 Hardware Installation... 7 5.0 Cable
More informationOPTICAL FIBER CLOSURE
OPTICAL FIBER CLOSURE INSTALLATION MANUAL STC-HTM Read these instructions carefully and completely before beginning installation. For assistance, contact Technical Support at 82.61.373.7500(South Korea),
More informationVerizon FTTP Tool Kits and Accessories An Evolant Solutions Product
Universal Access Tool (UAT3) Splits buffer tubes on single buffer tube ribbon fiber cables (SST-Ribbon and SST-UltraRibbon cables) and high-fiber-count ribbon cables with loose tube architectures such
More informationWRSS Wraparound Repair Sleeve Installation Instructions
WRSS Wraparound Repair Sleeve Installation Instructions TECP-30-263. Issue 1. 4/2016 1.0 General Product Information This practice provides information regarding the description and use of Raychem s WRSS
More informationProduct Number
Sealing and Grounding Cold Shrink cable accessory sealing kits are designed to seal the end of JCN cable. Use these kits when installing elbows or other cable accessories that do not include a jacket seal.
More information3M Electrical Markets Division. Rubber, Mastic and Specialty Tapes Application Guide. Choose the. Right Tape. for your. Electrical Project
3M Electrical Markets Division Rubber, Mastic and Specialty Tapes Application Guide Choose the Right Tape for your Electrical Project 2 Table of Contents Insulating and Splicing...4 Scotch Linerless Rubber
More informationTHE SB01 SPLICE ENCLOSURE NOW INCLUDES A LID GASKET THAT DOES NOT REQUIRE RTV APPLICATION.
THE SB01 SPLICE ENCLOSURE NOW INCLUDES A LID GASKET THAT DOES NOT REQUIRE RTV APPLICATION. DO NOT APPLY RTV TO THE GASKET WHEN SEALING THE SB01 SPLICE ENCLOSURE. SEE SECTION 10 FOR UPDATED INSTRUCTIONS.
More informationFIBER CONNECTOR SAFETY WARNINGS
FIBER CONNECTOR SAFETY WARNINGS SAFETY INFORMATION 1. Always wear safety glasses. 2. Isopropyl alcohol is flammable and may cause eye irritation. In case of contact with eyes, flush with water for at least
More informationIndustrial connections. Chain industrial connectors. Renewable energy. Earthing. Insulation products. Cable ties and accessories
Industrial connections Chain industrial connectors Renewable energy Earthing Insulation products Cable ties and accessories Tooling and accessories SICAME GROUP Connecting Solutions A young dynamic company
More informationLightLink Fiber Optic Splice Trays
LightLink Fiber Optic Splice Trays AFL s LightLink series of Fiber Optic Splice Trays offers a variety of unique and flexible splice and storage possibilities. They are available in industry standard config
More informationOFS 400A FIBER OPTIC INTERCONNECT Instruction Sheet UNIT (FOIU) Comcode INSTALLATION
OFS 400A FIBER OPTIC INTERCONNECT 636-299-109-01 Instruction Sheet UNIT (FOIU) Comcode 846 586 212 INSTALLATION This instruction sheet covers the 400A1 (106266901) and 400A2 (106414170) Fiber Optic Interconnect
More informationInstructions for Preparing AFL OPTICAL GROUND WIRE CABLE (HEXACORE CABLE DESIGNS)
Instructions for Preparing AFL OPTICAL GROUND WIRE CABLE IN THE OPTI-GUARD SPLICE ENCLOSURE (HEXACORE CABLE DESIGNS) NOTE: EXCEPT AS MAY BE OTHERWISE PROVIDED BY CONTRACT, THESE DRAWINGS AND/OR SPECIFICATIONS
More informationSLiC Aerial Terminal and Spiral End Seal for use with AMP* Quiet Front Terminal Blocks
SLiC Aerial Terminal and Spiral End Seal for use with AMP* Quiet Front Terminal Blocks Instructions June 2002 78-8130-2161-1-B 1 Contents: 1.0 General... 3 2.0 Kit Contents... 3 3.0 Cable Preparation...
More informationMultilink s Family of Wall Mount Enclosures
Multilink s Family of Wall Mount Enclosures The Multilink family of wall mounted optical termination enclosures are designed to provide solutions for both the interconnection of patch cabling and a combination
More informationCold Shrink QS T Trifurcating Transition Splice Kit
Cold Shrink QS2012-13-3T Trifurcating Transition Splice Kit Instructions IEEE Std. 404-1993 15 kv Class 110 kv BIL Completed Splice Cable Size Range Requirements PILC 500 kcmil Conductor Size (240 mm 2
More informationMA-LINE TOOLS AND ACCESSORIES
INDEX BRUSHES BOILER... 14-4 CLEANING... 14-4 COPPER TUBE... 14-3 NYLON TUBE... 14-3 WHISK CONDENSER FIN... 14-4 BUSHINGS ANTI-SHORT... 14-6 CAULKING GUN... 14-2 CHUCKS MAGNETIC... 14-3 COPPER TUBE EXTENSIONS
More informationRear Vision System Liftgate Emblem Camera for Aftermarket Display Ford Flex (Kit part number )
Rear Vision System Liftgate Emblem Camera for Aftermarket Display 2009-2012 Ford Flex (Kit part number 1008-6509) Kit Contents: Liftgate Emblem Mount with Camera Chassis Harness with RCA (Note: In some
More information3M Fiber Dome Closure FDC 10
3M Fiber ome losure F 10 With 3M Fiber Optic Splice Tray 2541 Instructions 1.0 General 2.0 Kit ontents The 3M Fiber ome losure F 10 can accommodate two 1.06" (27 mm) main cables, five 0.71" (18 mm) branch
More informationSeries 3 & 4 Stainless Steel - Accessories
- Accessories Splice Plates Standard 8-hole pattern for all steel splice plates. One pair including hardware provided with straight section. (Expansion splice quantity subtracted) Boxed in pairs with hardware.
More informationINSTALLATION INSTRUCTIONS
144F TABLE OF CONTENTS GENERAL... 2 SPECIFICATIONS... 2 PACKAGE CONTENTS... 2 PACKAGE CONTENTS: ACCESSORIES... 3 REQUIRED TOOLS... 3 ADD-ON COMPONENTS... 3 CABINET MOUNTING WALL MOUNT BRACKET ATTACHMENT...
More informationINSTALL MANUAL. FOR ON LINE ORDERING- E Commerce Visit Our Website
INSTALL MANUAL FOR ON LINE ORDERING- E Commerce Visit Our Website WWW.PRESSUREGUARD.COM Contact Information Technical Support: Chris@pressureguard.com Sales Support: Sales@pressureguard.com By Phone: 615-227-6024
More informationCaledonian Fire Resistant Optic Fiber Cables
Fire Resistant Optic Cables Fire resistant Central Loose Optic cables Application These cables are characterized by light weight and small diameter, suitable for both aerial and duct installation. They
More informationINSTALLATION INSTRUCTIONS
Rear Vision System Liftgate Emblem Camera Mirror Display 2009-2012 Ford Flex (Kit part number 1008-9527) Kit Contents: Mirror Liftgate Emblem Mount with Camera Interior (shorter) Harness Chassis (longer)
More informationHeat-Shrinkable Tubing
H-Tap Insulating Covers (Hard Covers) Interlocking insulating covers for H-type compression taps Easy installation: place the H-Tap in the cover and snap the cover closed Consult your Regional Sales Office
More informationFor a complete listing of kit contents, see page 225.
HS 455 Shrink Tube Kit - microseries Sealing & securing can now be taken to go! Contains 55 6" pieces of single wall 2-1 polyolefin, flexible type. I.D. ranges 1 8"- 1 2" in red, black, yellow and blue.
More informationTender for procurement of Passive Components of LAN & Wi-Fi and their installation. Corrigenda. Annexure/Clause For Read
Tender for procurement of Passive Components of LAN & Wi-Fi and their installation Corrigenda Sl. No. Annexure/Clause For Read Item Specifications Item Specifications 1. Annexure-I, Point No. 1.3 24 Port
More informationOAsys. Outside Plant. Metallic Joint Closure VXOK units. Features and Benefits
Metallic Joint Closure VXOK 10305 units for OPGW with Spiral Space or Aluminum Tube and for optical cables Prysmian Part Number: See the page no. 3 The Joint closure units VXOK 10305-24 144 are designed
More informationGRAIN CART TARP SYSTEM INSTALLATION AND OPERATION MANUAL
GRAIN CART TARP SYSTEM INSTALLATION AND OPERATION MANUAL Grain Carts KITS Thunderstone Manufacturing, LLC. 3400 West O Street Lincoln, NE 68528 402-435-4249 (Fax) 402-438-3918 www.thunderstonemfg.com Aluminum
More information2013 Road King CVO FLHRSE5 Detachable Fairing w/ Garmin Zumo 665 Installation Instructions
2013 Road King CVO FLHRSE5 Detachable Fairing w/ Garmin Zumo 665 Installation Instructions 1 1. Turn ignition switch to on position and leave there. This will prevent alarm from going off when you disconnect
More informationEnvironmental Distribution Center (EDC-06P-NH)
Corning Cable Systems Standard Recommended Procedure (SRP) 003-545 Issue 4, July 2004 Page 1 of 13 Environmental Distribution Center (EDC-06P-NH) 1.2 To purchase any accessories that are sold separately,
More informationAgency Approvals UL and CSA China RoHS - Below MCV Yes Color Red EU RoHS Compliant Yes Maximum Recommended Voltage Rating 600 Volt Units per Box 100
3M Worldwide : United States : Electronics Manufacturing Solutions for Electronic Specialty Markets (ESM) Product Catalog for Electronic Specialty Markets 3M Electronic Specialty Markets - New Product
More informationTOYOTA SIENNA FOG LIGHT (Halogen & LED)
(Halogen & LED) Part Number: TSI-312 / TSI-812 Kit Contents Item # Quantity Reqd. Description 1 2 Fog Lamps 2 2 Fog Light bezels 3 1 Switch Assembly 4 1 Fog Light Operation guide 5 1 Harness Bag Hardware
More informationPrinter-friendly format 3M Scotchlok Electrical Spring Connectors Y- BOX 5-8#22, 4-6#20, 2-5#18, 2-3#16 AWG, 100 per box, Yellow. Learn More...
3M Worldwide : United States : Electronics Manufacturing Solutions for Electronic Specialty Markets (ESM) Product Catalog for Electronic Specialty Markets 3M Electronic Specialty Markets - New Product
More informationExhibit 1 Page 1 of 8
Page 1 of 8 Opened: 10/11/17 Agency: Enterprise Technology Services Responses: 3 Purchasing Agent: Randy Plunkett Declinations: 0 SUMMARY Tabulation of Bids Services Ste. 11 & 26 and Consulting Item Commodity
More informationSPEED CONTROL 4 AND 6 CYL. JEEP WRANGLER. Read entire instructions thoroughly before starting. INSTALLATION INSTRUCTIONS TOOLS REQUIRED:
Read entire instructions thoroughly before starting. TOOLS REQUIRED: SPEED CONTROL 4 AND 6 CYL. JEEP WRANGLER INSTALLATION INSTRUCTIONS Complete socket set Phillips screwdriver Torx drivers Wire strippers/cutters
More informationM-9424-M50CJ INTAKE MANIFOLD INSTALLATION INSTRUCTIONS
Please visit www.fordracingparts.com for the most current instruction information!!! PLEASE READ ALL OF THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION. AT ANY TIME YOU DO NOT UNDERSTAND THE
More informationPanView iq (PViQ) Fiber Tray
PVQ-FMT PanView iq (PViQ) Fiber Tray Part Number: PVQ-FMT Contents: 1 - FIBER TRAY (HOUSING & DRAWER) 6 - #12-24 x 1/2" SCREWS 6 - M6 x 1.0 x 16 SCREWS 2 - STRAIN RELIEF BRACKETS 2 - #10-32 BLACK HEX NUTS
More informationLethal Performance Dual FPDM Harness Kit Installation
Lethal Performance Dual FPDM Harness Kit Installation The Lethal Performance Dual FPDM Harness Kit is a plug-and-play modification. Depending on whether you are using the Lethal Performance wire upgrade
More informationTubing and Accessories
Section 7 Tubing and Accessories Inch Industrial Tubing...............................FIT-7-2 Metric Industrial Tubing.............................FIT-7-3 Inch D.O.T. Tubing.................................FIT-7-3
More informationAccessory Kit Estimated Fitting Time: 120 Minutes (Prado) Estimated Fitting Time: 140 Minutes (Kluger)
Tow-Pro Wiring Kit - Toyota Kluger / Prado Accessory Kit Estimated Fitting Time: 0 Minutes (Prado) Estimated Fitting Time: 0 Minutes (Kluger) FI99 Page 0 of Issue: Date: 0/0/0 0 General Notes Read through
More informationFiber Splice Panel Rack Mount User Manual
Fiber Splice Panel Rack Mount User Manual Content Page INTRODUCTION... 1 Revision History... 1 List of Changes... 1 Trademark Information... 2 Admonishments... 2 1. DESCRIPTION... 2 A. Product Definition
More informationC A Heating Cable Gland Kit Installation Instructions
C75-100-A Heating Cable Gland Kit Installation Instructions Description The C75-100-A is a NEMA 4X-rated gland kit used to transition heating cables into a junction box when making connections off of a
More information