COYOTE. Retrofit Closure. Refinement of the Breed. COYOTE Retrofit Closure. The ideal Closure for replacement or expansion 1-29
|
|
- Maximillian Powers
- 5 years ago
- Views:
Transcription
1 COYOTE Retrofit Closure COYOTE Closure Series: Section 1 Refinement of the Breed The ideal Closure for replacement or expansion The COYOTE Retrofi t Closure contains a ver sa tile Fiber Management System which makes sim ple work out of retrofi tting ex ist ing fi ber optic clo sures for either closure replacement or closure capacity ex pan sion. COYOTE Retrofit Closure Specifically, the COYOTE Retrofit Closure will ac com mo date the existing fi ber management sys tems (slack buffer tubes or fi ber and splice trays) from closures manufactured by Lucent Tech nol o gies (UCB Series), 3M (2178 Series) and other suppliers. In addition to accommodating the existing splice trays and fi ber storage, the COYOTE Retrofi t Clo sure will hold up to four single fi ber splice trays, six low-profi le trays or up to two ribbon fi ber trays. The total added ca pac i ty of the COY OTE Splice Trays is 216 single fi ber, or 288 mass fu sion. As part of the family of COYOTE Closures, the COYOTE Retrofi t Closure uses the permanent neo prene gasket in the shell halves and the proven LOCK-TAPE Sealing System for the End Plate and cable seals. These features mean that the COYOTE Retro-fi t Closure will meet the same performance stan dards as the COYOTE Closure in aerial, un der ground and buried ap pli ca tions. The COYOTE Clo sure has been tested in accordance with the re quire ments of Telcordia GR-771-CORE. In addition, the COYOTE Retrofit Closure uses the same accessories as available for the COY OTE Closure, including Future Cable Ports, End Plate Grom mets, Aerial or Manhole Brackets and Splice Trays. See COYOTE Accessories section for catalog numbers for ac ces so ries. Number Closure Kits Description Closure Kit 8.5" x 22.0" (216 x 559 mm) COYOTE Retrofi t Closure. Includes two (2) Three-Section Six Port End Plates, hybrid Fiber Management System, Ten (10) End Plate Plugs and four (4) L-Brackets Splice Tray Kits 36 Count Standard Tray w/elastomeric splice blocks - Fusion & mechanical splices 144 Count Ribbon Tray w/fi xed rigid slots 36 Count Low Profi le Tray w/plastic splice block - single fusion splices 1-29
2 COYOTE Closure End Plates and Accessories Origin of the Species COYOTE Closure Shell Kits Number Description (mm) " (152) x 22.0" (559) COYOTE Shell Kit " (216) x 22.0" (559) COYOTE Shell Kit Transition and Buffer Tube Storage Compartments Number Description (mm) "(152) x 22.0" (559) Transition Compartment Kit 8.5" (216)x 22.0" (559) Transition Compartment Kit 6.0" (152) x 22.0" (559) Loose Buffer Tube Storage Compartment Kit 6.0" (152) x 22.0" (559) COYOTE Express Organizer (for loose buffer tube applications) 8.5" (216) x 22.0" (559) Loose Buffer Tube Storage Compartment Kit 8.5" (216) x 22.0" (559) COYOTE Express Organizer (for loose buffer tube applications) Transition Tube Kit for fi ber transition from top section of end plate to transition compartment Installation Materials Number Description (mm) C-Cement, 1 oz. tube C-Cement, 4 oz. can Moisture Blocking Sealant, 3 oz. tube LOCK-TAPE Sealant 1" (25) W x 15' (4 m) L Splice Protector, non-heat shrink 250/250 micron, pack of Fusion Splice Protector Holder Kit Mass Fusion Splice Protector, non-heat shrink, pack of mm Heat Shrink Splice Protector, pack of Felt strips (blue) 1 1 8" (29) x 9" (229), 6 strips Unitube Transition Compartment Loose Buffer Tube Storage Compartment Vertical Mount Bracket Mounting Brackets/Supports Number Description (mm) Adjustable Aerial Hanger Bracket Kit Manhole Support Bracket Kit Adjustable Aerial Hanger Brack et Vertical Mount Bracket Kit (for 6.0" (152) or 8.5"(216) COYOTE Closure or 6.0" (152) COYOTE PUP Closure) 1-16
3 COYOTE Closure Series: Section COYOTE Closure End Plates and Accessories Origin of the Species 1 COYOTE Closure End Plates and Accessories Strength Member Bracket Exterior Bond Braid Extended Strength Member Bracket Misc. Accessories Number Description(mm) Blank End Plate Kit Strength Member Bracket Kit - two per kit Extended Strength Member Bracket Kit - two per Kit Heat Shield for 6.0" (152) x 22.0" (559) COYOTE Closure Heat Shield for 8.5" (216) x 22.0" (559) COYOTE Closure Flame-Retardant Blanket for 6.0" (152) x 22.0" (559) COYOTE Closure Flame-Retardant Blanket for 8.5" (216) x 22.0" (559) COYOTE Closure Transition Tube Kit Used to transition fi bers from the top section of the End Plate to the Transition Compartment COYOTE Closure End Plate Removal Tool Transport Tube Kit.135" ID: includes six 34" long transport with Hardened Adapter tubes, used to bring fi ber from transition compartment to splice tray Transport Tube Kit.25" ID: includes six 34" long transport with Hardened Adapter tubes, used to bring fi ber from transition compartment to splice tray Bonding and Grounding Kits Number Description External bond clip kit External bond braid kit External isolation terminal kit, includes (2) isolation terminals with 10" long #6 cable stub and splice sleeve External isolation terminal kit, includes (2) isolation terminals with 10" long #6 cable stub and quick disconnect Quick disconnect kit (2 per kit) External isolation connector for COYOTE Closures Fiber optic shield connector, RUS Listed 3M #4460-D/FO (1 per kit) Fiber optic shield connector for up to.5" (13mm) cable O.D. Fiber optic shield connector for.5" to.8" (13-20mm) cable O.D. Fiber optic shield connector for.8" to 1.6" (20-41mm) cable O.D Adapter bracket kit for AT&T bond connector (4 per kit) Isolated ground kit for 0.27" to.31" (7-8mm) Strength member bracket isolation kit, includes (6) nylon washers and bushings Bonding Braid,.5" W x 7" L with (2) eyelets spaced 6" apart 1-17
4 COYOTE Closure End Plates and Accessories User options for COYOTE Closure Three-Section End Plate Ports Three-Section Six Port End Plate (Cat. No ) Two ¾" (19 mm) Ports Cables up to 0.75" (19 mm) in di am e ter ¾" (19 mm) Plug (Cat. No , two per kit) Note: Three-Section Six Port End Plate Kits in clude three 7 8" (22 mm) Plugs, two (2) ¾" (19 mm) Plugs and two Strength Mem ber Brack ets. 7/8 " 3/4" 7/8" 7/8 7/8 " " 3/4 " Four 7 8"(22 mm) Ports Cables up to 0.88" (22 mm) in di am e ter Future Cable Port, 0.56" (14 mm) max. cable diameter 7 8" Plug Kit ( ) Two 1" (25 mm) Ports Cables up to 1.00" (21 mm) in di am e ter Future Cable Port, 0.81" (21 mm) max. cable diameter 1" Plug Kit ( ) Three-Section Four Port End Plate (Cat. No ) 1 " 1 " 1 /4 " 1 /4 " Two 1¼" (32 mm) Ports Cables up to 1.25" (32 mm) in diameter Future Cable Port, 1" (25 mm) max. cable diameter 1¼" Plug Kit ( ) 1" (25 mm) Ports Cables up to 1.0" (25 mm) in diameter Future Cable Port, 0.81" (21 mm) max. cable diameter 1" Plug Kit ( ) 3/4 " 1 " 3/4 " Two ¾" (19 mm) Ports 1-18 Cables up to 0.75" (19 mm) in diameter ¾" Plug ( ) Two/Kit
5 COYOTE Closure Series: Section COYOTE Closure End Plates and Accessories Future Cable Port Kit When installed during the initial assembly, Future Cable Ports allow for the addition of branch cables in the future with no disruption to the existing cables and the fi bers within them. 1 COYOTE Closure End Plates and Accessories Number Description Future cable port kit for 7 8" Port, includes (1) cable port, (1) plug and (1) clamp Future cable port kit for 1" Port, includes (1) cable port, (1) plug and (1) clamp Future cable port kit for 1¼" Port includes (1) cable port, (1) plug and (1) clamp Future cable installation kit, includes LOCK- TAPE sealant, bead sealant and l-bracket Future cable port for 7 8" port plus installation kit ( ) Future cable port for 1" port plus installation kit ( ) Future cable port for 1¼" port plus installation kit ( ) Future Cable Port Kits End Plate Port Size End Plate Usage ¾" 7 8" 1.0" 1¼" Runt 6 Port 4 Port COYOTE Closure End Plate Grommets End Plate Installation Material Kits End Plate Grommets expand the capacity of the COY OTE Closure Three- Section End Plates for ap pli ca tions with smaller diameter cables or insulated ground wires. The grommets are manufactured from a weather-resistant urethane material that is designed to ensure a tight and permanent seal. A Silicone Sealant is provided to lu bri cate the grom met and cables for easy in stal la tion. Number Description 6 Port end plate kit, includes (1) end plate assembly, (1) full set of plugs and LOCK-TAPE sealing materials 4 Port end plate kit, includes (1) end plate assembly, (1) full set of plugs and LOCK-TAPE sealing materials Plug Kit for ¾" ports (2 per kit) Plug Kit for 7 8" ports (2 per kit) Plug Kit for 1.0" ports (2 per kit) Plug Kit for 1¼" ports (2 per kit) The entry holes in the multi-en try grom mets are covered with a thin layer of ure thane ma te ri al to pro vide a choice of which entries are to be used for fu ture cable en tries. See Grommet charts on the following page. 1-19
6 COYOTE Closure End Plates and Accessories PLP Number (End Color) (Green) (Green) (Orange) (Orange) Hole Pattern Entries Factory Slit 1 YES 1 YES 1 YES 1 YES Single Port Grommets Accepted Cable Diameter Range inches (mm) (9.6-11) (9.6-11) Coyote Runt Standard and Expanded COYOTE 6 Port End Plate COYOTE 4 Port End Plate Port Sizes Port Sizes Port Sizes ¾" 1" ¾" 7 8" 1" 1¼" 1-20
7 COYOTE Closure Series: Section COYOTE Closure End Plates and Accessories PLP Number (End Color) (Green) (Orange) (Black) (Black) (Orange) (Green) (Brown) (Brown) (Brown) Hole Pattern Entries Factory Slit 2 NO 2 NO 2 NO 2 NO 2 YES 3 YES 4 YES 6 NO 6 NO 6 YES 10 NO Multi-Port Grommets Accepted Cable Diameter Range inches (mm) (9.6-11) ( ) ( ) ( ) ( ) (9.6-11) ( ) ( ) (3-4.1) (3-4.1) (3-4.1) Coyote Runt Standard and Expanded Port Sizes COYOTE 6 Port End Plate Port Sizes COYOTE 4 Port End Plate Port Sizes ¾" 1" ¾" 7 8" 1" 1¼" COYOTE Closure End Plates and Accessories
8 COYOTE Closure Splice Tray Kits COYOTE Closure Splice Tray Kits Number Description 6.5" x 17" or Smaller 6" x 22" or Larger Count Low Profi le Tray w/plastic splice block - single fusion splices Count Low Profi le Tray (Blank) No Splice Block Count Standard Tray w/elastomeric splice block - Fusion & mechanical splices Count Standard Tray (Blank) - No Splice Block Count Ribbon Tray w/elastomeric Splice Block for Mass Fusion Ribbon Tray (Blank) No splice Block Count Low Profi le Tray w/plastic splice block - single fusion splices Blank Low Profi le Splice Tray Count Standard Tray w/elastomeric splice blocks - Fusion & mechanical splices Count Standard Tray w/fi xed rigid slots Count Standard Tray (Blank) - No splice Block Count Ribbon Tray w/fi xed rigid slots Count Ribbon Tray w/2 elastomeric splice blocks Count Ribbon Tray (Blank) - No splice blocks 1-22
COYOTE Closure. Origin of the Species. Key Features: PATENTED 1-14
COYOTE Closure Origin of the Species Size L (cm) W (cm) H (cm) 6.0" x 22" 22" (56) 8½" (22) 7" (18) 8.5" x 22" 22" (56) 10-3/4" (27) 9¼" (24) PATENTED Setting the bar against which all other fi ber closures
More informationClosure End Plates and Accessories
COYOTE Origin of the Species COYOTE Closure Shell Kits 80805258 6.0" (152) x 22.0" (559) COYOTE Shell Kit 80805259 8.5" (216) x 22.0" (559) COYOTE Shell Kit Transition and Buffer Tube Storage Compartments
More informationSection 1 COYOTE Closure Series
COYOTE Closure Series: Section 1 Section 1 COYOTE Closure Series Table of Contents COYOTE Closure Overview...1-2 COYOTE In-Line RUNT...1-4 COYOTE Terminal Closure...1-6 COYOTE Dome Closure...1-10 COYOTE
More informationSection 1 COYOTE Closure Series
COYOTE Closure Series: Section Section COYOTE Closure Series Table of Contents Page COYOTE Closure Overview...-2 COYOTE Splice Tray & Closure Capacity Charts...-4 COYOTE Closure...-7 COYOTE PUP Closure...-9
More informationCOYOTE Splice Case. Value conscious and benefit-packed: The COYOTE Splice. 2-2 (440)
COYOTE Splice Case Value conscious and benefit-packed: The COYOTE Splice The combines the field-proven performance of the PREFORMED Splice Case (stainless steel) with the high capacity and craft-friendly
More informationSection 1 COYOTE Closure Series
COYOTE Closure Series: Section Section COYOTE Closure Series Table of Contents Page COYOTE Closure Overview...-2 COYOTE LCC (Low Count Closure)...-4 COYOTE Aerial Drop Closure...-5 COYOTE In-Line RUNT...-6
More informationCOYOTE Splice Case. Value conscious and benefit-packed: The COYOTE Splice 2-2
COYOTE Splice Case Value conscious and benefit-packed: The COYOTE Splice The combines the field-proven performance of the PREFORMED Splice Case (stainless steel) with the high capacity and craft-friendly
More informationCOYOTE CLOSURE ADOBE SERIES FOR UNDERGROUND, AERIAL, AND BURIED SPLICES 6.0" x 22" 8.5" x 22" (152.4 mm x mm mm x 558.
FEBRUARY 2000 COYOTE CLOSURE ADOBE SERIES FOR UNDERGROUND, AERIAL, AND BURIED SPLICES 6.0" x 22" 8.5" x 22" (152.4 mm x 558.8 mm 215.9 mm x 558.8 mm) Be sure to read and completely understand this procedure
More informationFeatures: Use the selection chart below to choose the Splice Case and splice tray organizer which meet the requirements for your application.
FIBERLIGN Organizers For s (Protected and ) and Mechanical s FIBERLIGN Fiber Optic Organizers are designed to help organize, secure, support and protect delicate optical fibers before, during and after
More informationSection 3 FIBERLIGN Closure Series
FIBERLIGN Closure Series: Section 3 Section 3 FIBERLIGN Closure Series Table of Contents Page FIBERLIGN s...3-2 FIBERLIGN Organizers...3-3 FIBERLIGN UNI-CLOSURE...3-8 FIBERLIGN Fiber Safe...3-11 FIBERLIGN
More informationSection 1 COYOTE Closure Series
COYOTE Closure Series: Section Section COYOTE Closure Series Table of Contents Page COYOTE Closure Overview...-2 COYOTE GLC (Ground Level Closure)...-4 COYOTE Dome Closure...-9 COYOTE In-Line RUNT...-0
More informationBe sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application.
5 NOVEMBER 2010 COYOTE Dome 9.5 x 28 Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application. 1. 7. 2. 4. 10.
More informationCOYOTE Dome Closure 9.5" x 28" with Transition Tray for High Density Splice Applications
OCTOBER 2017 COYOTE Dome Closure 9.5" x 28" with Transition Tray for High Density Splice Applications Be sure to read and completely understand this procedure before applying product. Be sure to select
More informationCOYOTE LCC (Low Count Closure)
PLP Feature Focus 2009 Preformed Line Products OCTOBER 2012 Film available at www.preformed.com COYOTE LCC (Low Count Closure) Be sure to read and completely understand this procedure before applying product.
More informationCOYOTE Terminal Dome Closure 6.5" x 22"
FEBRUARY 2015 COYOTE Terminal Dome Closure 6.5" x 22" Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application.
More informationMARCH COYOTE 9.5 x 19 (292 mm x 509 mm) Terminal Dome Closure Kits
MARCH 2012 COYOTE 9.5 x 19 (292 mm x 509 mm) Terminal Dome Closure Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before
More informationCOYOTE 9.5" x 19" (292 mm x 509 mm) Dome Closure
AUGUST 2012 COYOTE 9.5" x 19" (292 mm x 509 mm) Dome Closure Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application.
More informationJANUARY 2015 NOMENCLATURE. TOOLS REQUIRED 3/8" & 7/16" Can wrench or socket 1/4 Nut driver or screwdriver Snips Fiber optic cable opening tools
JANUARY 2015 COYOTE Dome Closure 6-1/2" x 17" Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED TM product before application. 1 2
More informationCOYOTE Dome Closure 6.5" x 22" Kits. COYOTE Dome Closure 6.5" x 22" for Buffer Tube Applications. Includes: (2) Grommets, (1) Buffer
JANUARY 2015 COYOTE Dome Closure 6.5" x 22" Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application. 1 2 3 6
More informationCOYOTE 9.5" x 19" (292 mm x 509 mm) Cross-Connect Dome Closure
AUGUST 2013 COYOTE 9.5" x 19" (292 mm x 509 mm) Cross-Connect Dome Closure Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED TM product
More informationOFE-CLS-Type Outside Plant (OSP) Fiber Optic Closures Instructions
Instruction Sheet 860385855 Issue 3, June 2013 Uniprise Solutions OFE-CLS-Type Outside Plant (OSP) Fiber Optic Closures Instructions General Uniprise OFE-CLS-Type Outside Plant (OSP) Fiber Optic Closures
More information3000SC Fiber Optic Splice Closure
3000SC Fiber Optic Splice Closure Protect All Of Your Fiber Optic Splices From Harsh Outside Plant Environments Product Description Our 3000SC Fiber Optic Splice Closure is a sealed, reinforced thermoplastic
More informationCOYOTE Dome Cross-Connect Closure 6-1/2" x 22"
FEBRUARY 2015 COYOTE Dome Cross-Connect Closure 6-1/2" x 22" Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application.
More informationCOYOTE 28" GLC (Ground Level Closure) Complete Assembly Installation
NOVEMBER 2016 COYOTE 28" GLC (Ground Level Closure) Complete Assembly Installation Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED
More informationSection 7 FIBERLIGN Hardware Accessories for OPGW and/or ADSS
FIBERLIGN Hardware Accessories for OPGW and/or ADSS: Section Section FIBERLIGN Hardware Accessories for OPGW and/or ADSS Table of Contents Page ADSS CORONA Coil...-2 FIBERLIGN Cable Abrasion Protector
More informationOpti-Guard Splice Enclosure
Opti-Guard Splice Enclosure The Opti-Guard Splice Enclosure from AFL offers an impressive spectrum of features which makes it the best selection for your splice protection needs. Its unique and flexible
More informationSection 10 ARMADILLO Stainless Series
ARMADILO Stainless Series: Section 10 Section 10 ARMADILLO Stainless Series Table of Contents Page Series Overview...10-2 ARMADILLO Selection Guide...10-4 ARMADILLO Stainless Shell Kits...10-5 ARMADILLO
More informationCOYOTE STP (Service Termination Point)
March 2019 COYOTE STP (Service Termination Point) Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED TM product before application.
More informationARMADILLO Overview. Born Tough... Bred Smart Tames Costs as Well as Nature. ARMADILLO Stainless: The ARMADILLO Stainless is your best choice when
ARMADILLO Overview Born Tough... Bred Smart Tames Costs as Well as Nature ARMADILLO Stainless: For over 30 years, our Stainless Steel Splice Case has been the industry standard, with millions of successful
More informationChengdu Qianhong Communication Co., Ltd. Fiber Optic Splice Closure. GJS03-M8AX-JX-144D-Mechnical Sealing Way.
Fiber Optic Splice Closure GJS03-M8AX-JX-144D-Mechnical Sealing Way Specification GJS03-M8AX Catalogue General Introduction GJS03-M8AX-JX-144D dome Fiber Optic Splice Closure (FOSC) are mechanical sealing
More informationFOSC-400A4 INSTALLATION INSTRUCTION
FOSC-400A4 INSTALLATION INSTRUCTION TC-441-IP Rev A, Mar 2017 www.commscope.com Fibre Optic Splice Closure with integrated organiser system 1 General 1.1 The installation instruction describes the necessary
More informationFOSC-400D5 INSTALLATION INSTRUCTION. Fibre Optic Splice Closure with integrated organiser system
FOSC-400D5 INSTALLATION INSTRUCTION Fibre Optic Splice Closure with integrated organiser system 1 General 1.1 The installation instruction describes the necessary steps to install the FOSC-400D5. The
More informationSJOF-BS604A Fiber Optic Splice Closure User Manual Rev.0
Fiber Optic Splice Closure VISSEM 1. Introduction 1.1 General VISSEM s SJOF-BS604A protects fiber optic splicing point in various installation conditions such as aerial, manholes, ducts, wall and direct
More informationOptical Fiber Closure. Fuzzy Integral Closure for Optical Cable VSOF-RN402A VISSEM. Electronics Co., Ltd.
Optical Fiber Closure VSOF-RN402A VISSEM Electronics Co., Ltd. FTTH Closure for Optical Cable VSOF-RN402A Vissem s OF-RTC-RN402A protects fiber optic splicing joint in various installation conditions such
More informationCOYOTE STP (Service Termination Point)
JANUARY 2017 COYOTE STP (Service Termination Point) Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application.
More informationSection 10 ARMADILLO Stainless Series
ARMADILO Stainless Series: Section 10 Section 10 ARMADILLO Stainless Series Table of Contents Page Series Overview...10-2 ARMADILLO Selection Guide...10-4 ARMADILLO Stainless Shell Kits...10-5 ARMADILLO
More informationFOSC-100 B/H FOSC-100 B2/H
FOSC-100 B/H FOSC-100 B2/H INSTALLATION INSTRUCTION TC-273-IP Rev A, Mar 2017 www.commscope.com Fiber Optic Splice Closure with integrated organizer system 1 1 General 1.1 The installation instruction
More informationFOSCHF Horizontal Fiber Optic Splice Closure
Pictures FOSCHF Horizontal Fiber Optic Splice Closure Characteristics Holds up to 48 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Integrated seal,
More informationTargeted en gi ne e ring de sign. Hedge and Grasscutter mowers
Targeted en gi ne e ring de sign Hedge and Grasscutter mowers Fi xed di spla ce ment axial pi ston pump and mo tor swash plate design for open cir cu it One of Casappa s aims is to produce targeted engineering
More information3M Fiber Optic Splice Closure 2178
3M Fiber Optic Splice Closure 2178 Product Number Size in. (mm) (L x W x H) Splice Configuration Cable Entry Ports Maximum Splice Capacity 2178-XSB 14.6 x 10.1 x 4.6 (369.8 x 256.5 x 117.3) 3 48 Single
More informationFiber optic splice closure
FOSC-450A I N S T A L L A T I O N I N S T R U C T I O N TC-772-IP Rev A, Mar 2017 www.commscope.com Fiber optic splice closure Content 1 Introduction 2 General 2.1 Kit content 2.2 Tools 2.3 Accessories
More informationSection 5 FIBERLIGN Hardware for OPGW
FIBERLIGN Hardware for OPGW: Section Section FIBERLIGN Hardware for OPGW Table of Contents Page Fiber Optic Product Layout for OPGW...-2 FIBERLIGN Dead-end for OPGW...-3 FIBERLIGN Formed Wire Dead-end...-6
More informationCS Fiber Optic Splice Case. Instruction
3 2179-CS Fiber Optic Splice Case Instruction 2179-CS Fiber Optic Splice Case Description 1.0 General 1.1 The 3M 2179-CS Fiber Optic Splice Cases are closures that can be used in buried, underground, aerial,
More informationLSS1U-144/7 FIBER OPTIC SPLICE SHELF INSTALLATION GENERAL CUSTOMER SERVICES REFERENCES TOOLS REQUIRED
OFS Fitel LSS1U-144/7 Fiber Optic 636-99-103-1 Instruction Sheet Splice Shelf Installation COMCODE 845 866 474 LSS1U-144/7 FIBER OPTIC SPLICE SHELF INSTALLATION GENERAL This instruction sheet provides
More informationHeat Shrink closure Non - Pressurized & Pressurized RTSM Dome Closure RLSS RPBS Vault Closure Lead Sleeve Mechanical Closure Pillar Dp Jointing Kit
Cable Joint Products Heat Shrink closure Non - Pressurized & Pressurized RTSM Dome Closure RLSS RPBS Vault Closure Lead Sleeve Mechanical Closure Pillar Dp Jointing Kit Compound Splice Filling BOOK 1.indd
More informationSNR-FOSC-D-T. Installation Manual SNR-FOSC-D-T. Dome Heat Shrinkable Seal Fiber Optic Splice Closure (FOSC)
(FOSC) SNR-FOSC-D-T Installation Manual 1. Scope of application This Installation Manual suits for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC), as the guidance of proper installation.
More informationVerizon FTTP Tool Kits and Accessories An Evolant Solutions Product
Universal Access Tool (UAT3) Splits buffer tubes on single buffer tube ribbon fiber cables (SST-Ribbon and SST-UltraRibbon cables) and high-fiber-count ribbon cables with loose tube architectures such
More informationSNR-FOSC-H. Dome Mechanical Seal Fiber Optic Splice Closure. Dome Mechanical Seal Fiber Optic Splice Closure (FOSC) SNR-FOSC-H. Installation Manual
(FOSC) SNR-FOSC-H Installation Manual 1. Scope of application This Installation Manual suits for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC), as the guidance of proper installation.
More informationB1-OPCL Installation Manual
Horizontal Fiber Optic Splice Closure (FOSC) B1-OPCL12192 Installation Manual 1. Scope of application This Installation Manual suits for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC),
More informationSplice Trays. features and benefits. specifications. A LANscape. Solutions Product. Splice Capacity
features and benefits Metal trays powder coated Clear plastic covers Fiber loop retention Positive holding action specifications SPECIFICATION SHEET LAN-331-EN PAGE 1 Ruggedness and durability Fiber visibility
More informationHorizontal Fiber Optic Splice Closure (FOSC) FOSC-GPJ-A024. Installation Manual
Horizontal Fiber Optic Splice Closure (FOSC) FOSC-GPJ-A024 Installation Manual 1. Scope of application This Installation Manual suits for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC),
More informationLow Voltage Network Quality Power factor correction Harmonic fl ickering Dynamic fl icker compensation
Power factor correction Harmonic fl ickering Dynamic fl icker compensation Products & Systems.1 ABB Inc. 888-385-1221 www.abb-control.com AC 1000-11/03 Spec Tech Industrial 203 Vest Ave. Valley Park, MO
More informationSNR-FOSC-F. Dome Mechanical Seal Fiber Optic Splice Closure. Dome Mechanical Seal Fiber Optic Splice Closure (FOSC) SNR-FOSC-F. Installation Manual
(FOSC) SNR-FOSC-F Installation Manual 1. Scope of application This Installation Manual suits for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC), as the guidance of proper installation.
More informationHorizontal Fiber Optic Splice Closure (FOSC) Installation Manual
Horizontal Fiber Optic Splice Closure (FOSC) Installation Manual 1. Scope of application Installation Manual for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC). The scope of application
More informationTECHNICAL DATA OBSOLETE
January 17, 2000 217 a HIGH PRESSURE SOLENOID VALVE Max i mum 250 PSI (1 724 kpa) 1. PRODUCT NAME High Pressure Solenoid Valve For Max i mum 250 psi (1 724 kpa) Wa ter Working Pressure 2. MANUFACTURED
More informationMini-OTE 400. Mini-OTE 400. Content 1 General 1.1 General product information 1.2 Cable types 1.3 Symbols in this guide.
Mini-OTE 400 INSTALLATION INSTRUCTION TC-1335-IP Rev C, March 2017 www.commscope.com Mini-OTE 400 Content 1 General 1.1 General product information 1.2 Cable types 1.3 Symbols in this guide 2 Tools Required
More informationHSC-O1. Dome Mechanical Seal Fiber Optic Splice Closure (FOSC)
HSC-O1 Dome Mechanical Seal Fiber Optic Splice Closure (FOSC) Contents 1.Scope of application 2.Basic structure and configuration 3.Necessary tools for installation 4.Installation flow chart 5.The process
More informationINSTALLATION INSTRUCTIONS
TABLE OF CONTENTS GENERAL...2 SPECIFICATIONS...2 PACKAGE CONTENTS...2 PACKAGE CONTENTS: ACCESSORIES...3 REQUIRED TOOLS...3 ADD-ON COMPONENTS...3 CLOSURE MOUNTING...3 LOCK AND UNLOCK EXTERIOR DOOR...3 CABLE
More information3M Fiber Dome Closure FDC 10
3M Fiber ome losure F 10 With 3M Fiber Optic Splice Tray 2541 Instructions 1.0 General 2.0 Kit ontents The 3M Fiber ome losure F 10 can accommodate two 1.06" (27 mm) main cables, five 0.71" (18 mm) branch
More informationezprep Gel-Free Loose Tube Gel-Free Loose Tube Cable (2.5mm)
...... ezprep Gel-Free Loose Tube Gel-Free Loose Tube Cable (2.5mm) Optical Fibers Water Blocking Binders... Ripcord Jacket (polyethylene) Draka Optical Cable... Central Strength Member Flexible Buffer
More informationOPTICAL FIBER CLOSURE
OPTICAL FIBER CLOSURE INSTALLATION MANUAL STC-HTM Read these instructions carefully and completely before beginning installation. For assistance, contact Technical Support at 82.61.373.7500(South Korea),
More informationMODELS CA-1 & CA-2 MODEL CA-1 CA-TB TECHNICAL BULLETIN BACK PRESSURE / RELIEF REGULATOR FEATURES APPLICATIONS CAUTION
ISO Registered Company MODELS CA-1 & CA-2 TECHNICAL BULLETIN CA-TB 02-16 MODEL CA-1 BACK PRESSURE / RELIEF REGULATOR The Model CA-1 is a compact, forged Bronze body or SST barstock body back pressure regulator
More informationSNR-FOSC-D. Dome Mechanical Seal Fiber Optic Splice Closure. Dome Mechanical Seal Fiber Optic Splice Closure (FOSC) SNR-FOSC-D. Installation Manual
(FOSC) SNR-FOSC-D Installation Manual 1. Scope of application This Installation Manual suits for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC), as the guidance of proper installation.
More informationHOLOPHANE Outdoor Lighting
68 Sign Lighting Signs have two purposesto attract attention and to convey a message. And during nighttime hours, sign lighting must provide visibility and legibility to deliver the appropriate message.
More informationDome Mechanical Seal Fiber Optic Splice Closure (FOSC) OT-8903-AE. Installation Manual
Dome Mechanical Seal Fiber Optic Splice Closure (FOSC) OT-8903-AE Installation Manual 1. Scope of application This Installation Manual suits for one of the Fiber Optic Splice Closure (Hereafter abbreviated
More information8400 Series Fiber Distribution System
8400 Series Fiber Distribution System Instructions January 1997 34-7041-4699-1-A 1 Contents: 1.0 General... 3 2.0 System Components... 4 3.0 System Engineering... 5 4.0 Hardware Installation... 7 5.0 Cable
More informationB Polyethylene Tape. B Splicing Covering. Holster
Splicing Materials B Polyethylene Tape Translucent 8-mil polyethylene tape made from electrical grade base material. Intended for use in restoring the dielectric strength between the core and sheath at
More informationOFS 400A FIBER OPTIC INTERCONNECT Instruction Sheet UNIT (FOIU) Comcode INSTALLATION
OFS 400A FIBER OPTIC INTERCONNECT 636-299-109-01 Instruction Sheet UNIT (FOIU) Comcode 846 586 212 INSTALLATION This instruction sheet covers the 400A1 (106266901) and 400A2 (106414170) Fiber Optic Interconnect
More informationPolyshot Heated Sprue Bushings
Polyshot Heated Sprue Bushings Machine Nozzle Sealing Radius Hard Tool Steel Body All Wiring Runs Through Top Clamp Plate Stainless Steel Replaceable Collar Flow Path Independent Thermocouple Profiled/Tapered
More informationFour armature sizes. Simple. Powerful. Controllable.
One of the keys to the Warner Electric tensioning system is the Electro Disc tension brake. Electro Disc brake systems are capable of continuous slip from full roll to core diameter while providing outstandingly
More informationOFS LSS1U-864/ Instruction Sheet Fiber Optic Comcode: Splice Shelf Installation
OFS LSS1U-864/9 636-299-103-49 Instruction Sheet Fiber Optic Comcode: 848 461 620 Splice Shelf Installation LSS1U-864/9 FIBER OPTIC SPLICE SHELF INSTALLATION GENERAL This instruction sheet provides procedures
More informationFIST-GSS2 FIST-GSS3. Fist Generic Splicing Shelf. Contents. 1 Introduction. 2 General. 3 Installation of the shelf. 5 Termination of the pigtails
FIST-GSS2 FIST-GSS3 I N S T A L L A T I O N I N S T R U C T I O N Fist Generic Splicing Shelf Contents 1 Introduction 2 General 2.1 Kit content 2.2 Tools 3 Installation of the shelf 3.1 Mounting the shelf
More informationTHE SB01 SPLICE ENCLOSURE NOW INCLUDES A LID GASKET THAT DOES NOT REQUIRE RTV APPLICATION.
THE SB01 SPLICE ENCLOSURE NOW INCLUDES A LID GASKET THAT DOES NOT REQUIRE RTV APPLICATION. DO NOT APPLY RTV TO THE GASKET WHEN SEALING THE SB01 SPLICE ENCLOSURE. SEE SECTION 10 FOR UPDATED INSTRUCTIONS.
More informationezspan ADSS All-dielectric self-supporting loose tube cable
All-dielectric self-supporting loose tube cable MANUFACTURED IN Aramid Strength Yarns Inner Jacket Polyethylene (optional) Central Strength Member Water Blocking Material Gel-Filled Buffer Tube Containing
More informationezspan ADSS Short Span All-Dielectric Self-Support Loose Tube Cable
...... ezspan ADSS Short Span All-Dielectric Self-Support Loose Tube Cable Water Blocking Binders... Ripcord Optical Fibers...... Flexible Buffer Tube Jacket (polyethylene) (3.0 mm) Aramid Strength Yarns......
More informationMODEL PRESSURE REDUCING REGULATOR BODY SIZES 1/4" OR 3/8" (DN8 or DN10) TECHNICAL BULLETIN 3381-TB FEATURES APPLICATIONS
TECHNICAL BULLETIN 3381-TB 05-12 MODEL 3381 PRESSURE REDUCING REGULATOR BODY SIZES 1/4" OR 3/8" (DN8 or DN10) The Model 3381 is an inexpensive, bronze pressure reducing regulator designed to handle small
More informationINSTALLATION INSTRUCTIONS
144F TABLE OF CONTENTS GENERAL... 2 SPECIFICATIONS... 2 PACKAGE CONTENTS... 2 PACKAGE CONTENTS: ACCESSORIES... 3 REQUIRED TOOLS... 3 ADD-ON COMPONENTS... 3 CABINET MOUNTING WALL MOUNT BRACKET ATTACHMENT...
More informationInstructions for Preparing AFL OPTICAL GROUND WIRE CABLE (HEXACORE CABLE DESIGNS)
Instructions for Preparing AFL OPTICAL GROUND WIRE CABLE IN THE OPTI-GUARD SPLICE ENCLOSURE (HEXACORE CABLE DESIGNS) NOTE: EXCEPT AS MAY BE OTHERWISE PROVIDED BY CONTRACT, THESE DRAWINGS AND/OR SPECIFICATIONS
More informationTHE SB01 SPLICE ENCLOSURE NOW INCLUDES A LID GASKET THAT DOES NOT REQUIRE RTV APPLICATION.
THE SB01 SPLICE ENCLOSURE NOW INCLUDES A LID GASKET THAT DOES NOT REQUIRE RTV APPLICATION. DO NOT APPLY RTV TO THE GASKET WHEN SEALING THE SB01 SPLICE ENCLOSURE. SEE SECTION 18 FOR UPDATED INSTRUCTIONS.
More informationTubing and Accessories
Section 7 Tubing and Accessories Inch Industrial Tubing...............................FIT-7-2 Metric Industrial Tubing.............................FIT-7-3 Inch D.O.T. Tubing.................................FIT-7-3
More informationSLiC Aerial Terminal and Spiral End Seal for use with AMP* Quiet Front Terminal Blocks
SLiC Aerial Terminal and Spiral End Seal for use with AMP* Quiet Front Terminal Blocks Instructions June 2002 78-8130-2161-1-B 1 Contents: 1.0 General... 3 2.0 Kit Contents... 3 3.0 Cable Preparation...
More informationACCESSORIES FOR LPOF, HPPT AND XLPE HIGH VOLTAGE CABLE SYSTEMS PRODUCT CATALOGUE
ACCESSORIES FOR LPOF, HPPT AND XLPE HIGH VOLTAGE CABLE SYSTEMS PRODUCT CATALOGUE hvgrid-tech designs and manufactures high voltage cable accessories for all types of cable systems, ranging from 69 kv to
More informationPro M Miniature Circuit Breakers S260, S270, S280, S290. System Pro M. Description
Miniature Circuit Breakers S260, S270, S280, S290 Description The S2 Series of miniature circuit breakers offer a compact solution to protection requirements. The breakers are recognized under standard
More informationTable of Contents. Kit Maximum Examples Index by Kit Number Terms and Conditions...Inside Back Cover
Table of Contents Antenna Mounts Light Standoff Mounts...2 Medium Standoff Mounts...4 Heavy Standoff Mounts...6 Fixed Crossover Assemblies...8 Universal Crossover Assemblies...8 Hybrid Crossover Assemblies...9
More informationFIBER CONNECTOR SAFETY WARNINGS
FIBER CONNECTOR SAFETY WARNINGS SAFETY INFORMATION 1. Always wear safety glasses. 2. Isopropyl alcohol is flammable and may cause eye irritation. In case of contact with eyes, flush with water for at least
More informationVentilated Distribution Transformers
Ventilated Distribution Transformers The Energy Policy Act of 2005 (H.R. 6) requires Distribution Transformers manufactured after January 1, 2007 to meet specifi c energy effi ciency requirements. EPAct
More informationPanView iq (PViQ) Fiber Tray
PVQ-FMT PanView iq (PViQ) Fiber Tray Part Number: PVQ-FMT Contents: 1 - FIBER TRAY (HOUSING & DRAWER) 6 - #12-24 x 1/2" SCREWS 6 - M6 x 1.0 x 16 SCREWS 2 - STRAIN RELIEF BRACKETS 2 - #10-32 BLACK HEX NUTS
More informationFiber Splice Panel Rack Mount User Manual
Fiber Splice Panel Rack Mount User Manual Content Page INTRODUCTION... 1 Revision History... 1 List of Changes... 1 Trademark Information... 2 Admonishments... 2 1. DESCRIPTION... 2 A. Product Definition
More informationExpressLT Dry Dry Loose Tube Cable (2.5 mm)
MANUFACTURED IN A versatile, multi-purpose fiber cable designed for ease of use and Buffer Tube Mid-Span Storage applications Overview Prysmian s popular ExpressLT cable combines buffer tubes with enhanced
More informationMultilink s Family of Wall Mount Enclosures
Multilink s Family of Wall Mount Enclosures The Multilink family of wall mounted optical termination enclosures are designed to provide solutions for both the interconnection of patch cabling and a combination
More informationFIST-GSS2. Fist Generic Splicing Shelf MK2. Contents. 1 Introduction. 2 General. 3 Installation of the shelf. 5 Termination of the pigtails
FIST-GSS2 I N S T A L L A T I O N I N S T R U C T I O N Fist Generic Splicing Shelf MK2 Contents 1 Introduction 2 General 2.1 Kit content 2.2 Tools 2.3 Optional extra s 3 Installation of the shelf 3.1
More informationIndividual & fixed bank capacitors
Individual & fixed bank capacitors L O W V O L T A G E N E T W O R K Q U A L I T Y Description High reliability Well proven features of ABB dry type power factor cor rection capacitor tech nology are incorporated
More informationMODEL 345 HIGH PRESSURE REDUCING REGULATOR TECHNICAL BULLETIN 345-TB FEATURES High inlet and outlet pressures; high pressure drops.
TECHNICAL BULLETIN 02-16 ISO Registered Company MODEL 345 HIGH PRESSURE REDUCING REGULATOR The Model 345 is a piston style, heavy duty, high pres sure reducing regulator that can include bal anced trim
More informationPre-installation Manual. PlateWriter 3600 Pro
Pre-installation Manual PlateWriter 3600 Pro Pre-installation Manual PlateWriter 3600 Pro T11435 Edition AB, March 2016 This book has part No 10081552 0-2 This man ual is pub lished by: GLUNZ & JENSEN
More informationNon-Ventilated Automation Transformers 6
Non-Ventilated Automation Transformers 6 Automation Transformers - Non-Ventilated 50 VA to 45 SolaHD encapsulated transformers are rated for Hazardous Locations (Class 1, Division 2, Group A-D) as well
More informationHD30 & HDP20 Series. Contents. Mounting 88. Overview. Dimensions 80. How To Instructions Part Numbering System 81. Configurations 82-83
HD30 & HDP20 Series Contents HD30 & HDP20 Series Overview 80 Mounting 88 Dimensions 80 How To Instructions 89-90 Part umbering System 81 Configurations 82-83 Wire Insulation 83 Special Modifications 84-85
More informationRF Type 5 (04) Dimensions in mm (not to scale) Recommended Land Pattern in mm (not to scale) 0.2± ± ± ±0.05 Standard Packing uantit
Chip Inductors High Frequency Use (Non Magnetic Core) Type: ELJRF ELJRE Features High frequency capability due to its non magnetic core. Capable of being Re-fl ow or fl ow soldered. Unique Ceramic Core/Laser-cut
More informationOBSOLETE DESIGN DATA PREACTION FOAM/WATER SYSTEM USING AFFF OR ARC. March 1, Foam 30a
March 1, 2001 Foam 30a 1. DESCRIPTION A Preaction Blad der Tank Foam/Wa ter Sys tem is a stan dard preaction sys tem ca pa ble of dis charg ing a foam/wa ter so lu tion au to mat i cally through any sprin
More informationLightLink Fiber Optic Splice Trays
LightLink Fiber Optic Splice Trays AFL s LightLink series of Fiber Optic Splice Trays offers a variety of unique and flexible splice and storage possibilities. They are available in industry standard config
More informationInterconnect Cable Simplex and Duplex
10.3 Interconnect Cable Simplex and Duplex Tight Buffer & Plenum Rated Patch panels Workstation equipment connections Horizontal distribution in open office environments Interconnect Cables are designed
More information