DENTAL COMPONENTS Manufacturing Quality. Product Catalog

Transcription

1 DENTAL COMPONENTS Manufacturing Quality Product Catalog

2 TUBING COLOR CHART BLACK GRAY SURF STERLING SURF S.E. Bridgeford Blvd., Suite 1 Bend, Oregon WELCOME! Chapman-Huffman, Inc., since 1979, is committed to providing superior dental components & replacement parts at an excellent value to our customers. Count on us for the hard-to-find specialty parts. We appreciate your business! (6 a.m. - 5 p.m. PST) (541) HR ORDERING FAX hr. Cont. U.S., Hawaii & Alaska FAX (541) ORDERS@CHAPMAN-HUFFMAN.COM ORDERING INFORMATION Please include the following information with your order: Customer Number: Part Number Description Quantity Needed Date Required Method of Shipping TERMS Net 30 days, on approved accounts; others C.O.D. until credit approved. All prices quoted F.O.B., Bend, Oregon, U.S.A. Suggested retail prices effective June 1, 2017 Returns may be made only with prior factory authorization. 15% handling charge on all returned items, unless deemed defective. Minimum order - $ Prices subject to change without notification. Light Bulbs are NOT returnable for credit Follow Us Proud Member HANDPIECE CONTROLS, TRAYS & ARMS 2-8 SYRINGES & WATER HEATERS 9-26 FOOT CONTROLS QUICK COUPLERS & HP ACCESSORIES BULBS & LED BULBS LIGHT PARTS CHAIR & STOOL PARTS ACCESSORIES & O-RINGS ELECTRICAL COMPONENTS COMPRESSOR PARTS STERILIZER PARTS SCALER PARTS FIBER OPTICS TUBING REGULATORS & FILTERS FITTINGS VALVES HOLDERS VACUUM SERVICE TOOLS INDEX WARRANTY All products manufactured or distributed by Chapman-Huffman, Inc are warranted for one year from the date of purchase (except for new and rebuilt circuit boards - three months and fiber optic & power optic tubing assemblies and sterilizer gaskets - six months) under normal and proper use against defective material or workmanship. Any product or part returned to us postpaid within the warranty period, as a result of defective material or workmanship, will be repaired or replaced (at our option) without charge. The warranty does not cover damage from improper installation. Chapman-Huffman, Inc. liability shall be limited to said repair or replacement and shall not include loss of use, inconvenience or any kind of incidental, consequential or special damages due to failure of this product. DISCLAIMER OF WARRANTIES: THERE IS NO WARRANTY OF MERCHANTABILITY, NO WARRANTY OF FITNESS FOR PARTICULAR PURPOSE AND THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF Chapman-Huffman, Inc. All rights reserved Printed in U.S.A.

3 HANDPIECE CONTROLS, TRAYS & ARMS 3 HANDPIECE AUTOMATIC $ BENCH TOP CONTROL This Three Handpiece Automatic Unit is designed for Handpiece Repair Technicians, as a tabletop or bench mounted control, with flexibility of remote mounting the holder bar for your convenience Note! Requires filtered/regulated air and water Automatic activation for three handpieces Individual combination water relay and needle valve adjustments Single needle valve for coolant air adjustment Master on-off toggle valve for controlling floor valve functions Variable speed wet/dry foot control Asepsis 3-way syringe - pin type Individual turbine pressure adjustment conveniently placed in top cover 7 ft. umbilical with air, water and master switch tubing Handpiece holders with lock-out toggle Handpiece pressure indicator gauge Control measures 9 3/4 (248mm) Wide x 2 1/4 (58mm) High x 5 (127mm) Deep Order Handpiece Tubing Assemblies Separately (Standard or Power Optics available in 7 ft. standard length or 12 ft. special order) ASEPSIS 2 HANDPIECE MANUAL CONTROL Gray Straight $ Gray Coiled $ Black Straight $ Black Coiled $ Surf Straight $ Surf Coiled $ NOTE! Control requires filtered/regulated air and water Manual activation for two handpieces Adjustable coolant water for one handpiece Handpiece tubings (Specify type by part number) Handpiece pressure indicator gauge Individual turbine pressure adjustments Instrument holders Variable speed disc type foot control Autoclavable syringe with quick disconnect tip Control measures 6 1/4 (159mm) wide x 5 1/8 (130mm) high x 2 5/8 (67mm) deep Installation kit 2 HANDPIECE MANUAL CONTROL Gray Straight $ Gray Coiled $ Black Straight $ Black Coiled $ Surf Straight $ Surf Coiled $ NOTE! Control Requires filtered/regulated air and water Manual activation for two handpieces Adjustable coolant water for one handpiece Handpiece tubings (Specify type by part number) Handpiece pressure indicator gauge Individual turbine pressure adjustment 2 CFM Instrument holders Variable speed disc type foot control Asepsis 3-way syringe - pin type Control measures 6 (152mm) wide x 3 1/2 (89mm) high x 1 1/2 (38mm) deep Installation kit 2 HANDPIECE MANUAL CONTROL WITH COOLANT WATER TO BOTH HANDPIECES Gray Straight $ Gray Coiled $ Black Straight $ Black Coiled $ Surf Straight $ Surf Coiled $ NOTE! Control Requires filtered/regulated air and water Manual activation for two handpieces Adjustable coolant water for both handpieces Handpiece tubings (Specify type by part number) Handpiece pressure indicator gauge Individual turbine pressure adjustment 2 CFM Instrument holders Variable speed disc type foot control Asepsis 3-way syringe - pin type Control measures 6 (152mm) wide x 3 1/2 (89mm) high x 1 1/2 (38mm) deep Installation kit HANDPIECE CONTROLS, TRAYS & ARMS 2 3

4 HANDPIECE CONTROLS, TRAYS & ARMS 3 HANDPIECE AUTOMATIC MINI CONTROL WITH FLOOR VALVES Gray Straight $ Gray Coiled $ Black Straight $ Black Coiled $ Surf Straight $ Surf Coiled $ POST MOUNT UTILITY SHELF ASSEMBLY Clear Anodized $ Surf Paint $ wide x 10 deep effective storage space Mounts to 2 diameter vertical post OR mounts to 1 7/8 diameter post by purchasing separately (1) adapter (pg. 6) HANDPIECE CONTROLS, TRAYS & ARMS WITHOUT FLOOR VALVES Gray Straight $ Gray Coiled $ Black Straight $ Black Coiled $ Surf Straight $ Surf Coiled $ NOTE! Control requires filtered/regulated air and water Automatic activation for three handpieces Coolant on-off toggle Adjustable coolant water for each handpiece Asepsis 3-way syringe - pin type Individual turbine pressure adjustment 2 CFM Master on-off toggle Master floor valves less junction box enclosure 7 Umbilical w/ air, water & master switch tubings Handpiece holders with lock-out lever Handpiece pressure indicator gauge Variable speed disc type foot control Control Measures 7 3/4 (197mm) wide x 4 (102mm) high x 2 (51mm) deep Handpiece tubings (Specify type by part number) Installation kit POST MOUNT UTILITY SHELF Clear Anodized $ Surf Paint $ wide x 10 3/4 deep effective storage space Mounts to 1 7/8 or 2 diameter vertical post Will also mount to most U-frames & H-frames Built-in leveling screws for your convenience when needed UNIVERSAL TRAY ASSEMBLY With 2 Dia. Post Mount $ With Universal Wall Mount $ With Universal Surface Mount $ /2 wide x 12 deep effective storage space Pivots on mounting bracket for easy access 1/2 dia. pin mount Mounting bracket included Surf Finish UNIVERSAL TRAY ASSEMBLY With 2 Dia. Post Mount $ With Universal Wall Mount $ With Universal Surface Mount $ LAB HANDPIECE CONTROL KIT $ Control for one dry handpiece Air pressure regulator Regulator mounting bracket Air filter assembly (35 micron) Handpiece tubing assembly (Four hole connector with two hole gray tubing) Disc type foot control Handpiece holder and bracket Installation instructions 8 wide x 10 deep effective storage space Pivots on mounting bracket for easy access 1/2 dia. pin mount Mounting bracket included Surf finish UNIVERSAL EXTENSION ARM ASSEMBLY 8 Extension Arm $ Extension Arm $ Extension Arm $70.40 Mounts using 1/2 dia. pin and accepts 1/2 dia. pin opposite end Rigid construction Surf Finish 4 5

5 HANDPIECE CONTROLS, TRAYS & ARMS 2 DIAMETER ARM MOUNT ASSEMBLY $53.00 Designed for mounting Universal Tray Assembly & Universal Extension Arm Assembly to 2 dia. post Accepts 1/2 dia. pin Surf finish ADAPTER FOR 1 7/8 POST $10.80 STAINLESS STEEL TRAY $60.80 Stainless Steel 9 3/4 (25cm) wide 13 1/2 (34cm) long Ritter size HANDPIECE CONTROLS, TRAYS & ARMS Designed for adapting Dia. Arm Mount Assembly (above) or Universal Post Mount Assembly (pg. 66) to a 1 7/8 dia. post Plastic construction INSTRUMENT TRAY NON-SLIP PAD $10.80 Keeps trays from slipping when put in place 7 1/2 x 11 1/2 MARUS DENTAL Cross Ref. # 30R360 UNIVERSAL WALL MOUNT ASSEMBLY $61.80 Designed for mounting Universal Tray Assembly and Universal Extension Arm Assembly to a flat vertical surface 4 x 4 mounting plate Accepts 1/2 dia. pin Surf finish UNIVERSAL SURFACE MOUNT ASSEMBLY $61.80 Designed for Mounting Universal Tray Assembly and Universal Extension Arm Assembly to a flat horizontal surface 4 x 4 mounting plate Accepts 1/2 dia. pin Surf finish POST MOUNT EXTENSION KIT PELTON & Crane Type $ Adapter, White Post & Bracket PELTON & CRANE Type $ Adapter, Plated Post & Clear Anodized Bracket RITTER Type Adapter $ White Post & Bracket RITTER Type Adapter $ Plated Post & Clear Anodized Bracket Designed for use with 2 diameter post 24 light post Dual post mount bracket Light adapter bushing 8 gray extension cord UNIT ARM MOUNT KIT $58.40 For mounting , , and series units (pg. 3-4) to the Universal Extension Arm Assembly (pg. 5) 1/2 dia. pin mount Includes unit mounting screws Surf finish 6 7

6 HANDPIECE CONTROLS, TRAYS & ARMS H FRAME MOBILE STAND $ Stable H Frame base Adjustable vertical height from 25 to 41 2 diameter post with 6 X 6 mounting plate with leveling screws Dual wheel gray casters roll freely on carpet or tile Base size 20 1/2 wide X 18 deep Powder Coated gray-white finish Gray knob and end caps U FRAME MOBILE STAND $ Adjustable vertical height from 23 to angled upright 2 diameter post with 6 x 6 mounting plate with leveling screws Dual wheel gray casters roll freely on carpet or tile Base size 18 wide X 15 1/2 deep Powder Coated gray-white finish Gray knob and end caps WIPE CLEAN SYRINGE WITH QUICK DISCONNECT TIP NEW! MANUFACTURED BY CHAPMAN-HUFFMAN, INC. IN THE USA THE SAME AS OUR OTHER SYRINGES Asepsis contours for fast and easy cleaning Quick disconnect tip from head by pushing in locking ring Locked in cartridge style air/water buttons 360 tip rotation Precise mist, air and water control Matte chrome finish DCI cross ref. # 3430 Syringe Only $80.00 SYRINGE W/ COILED ASEPSIS TUBING Black $93.00 Gray $93.00 Surf $93.00 Sterling $93.00 Surf $93.00 SYRINGE W/ STRAIGHT ASEPSIS TUBING SYRINGES & WATER HEATERS Black $90.00 Gray $90.00 Surf $90.00 Sterling $90.00 MOBILE STAND END CAP BLACK $5.60 GRAY $5.60 Surf $90.00 Fits H and U frames listed above, and

7 AUTOCLAVABLE SYRINGE WITH QUICK DISCONNECT TIP VALVE CORE STYLE SYRINGE WITH QUICK DISCONNECT TIP Syringe Only $80.00 SYRINGE WITH COILED TUBING Black Coiled $93.00 Syringe Only $ Gray Coiled $93.00 Surf Coiled $93.00 SYRINGES & WATER HEATERS Extra Autoclavable Syringe $91.20 Head Assembly With Quick Disconnect Tip, Less Handle SYRINGE W/ COILED ASEPSIS TUBING Black $ Gray $ Surf $ Sterling $ Surf $ SYRINGE W/ STRAIGHT ASEPSIS TUBING Black $ Gray $ NEW! Sterling Coiled $93.00 Surf 6 Coiled $93.00 SYRINGE WITH 7 STRAIGHT TUBING Black Straight $90.00 Gray Straight $90.00 Surf Straight $90.00 Sterling Straight $90.00 Surf 6 Straight $90.00 Quick Disconnect Tip is released by pushing in on locking ring Smooth contours for easy cleaning Traditional valve core design Uses standard autoclavable tips or disposable tips DCI cross ref. # 3470 Made in Bend, Oregon, U.S.A. SYRINGES & WATER HEATERS Surf $ Sterling $ Surf $ VALVE CORE TOOL SERIES $5.20 MANUFACTURED BY CHAPMAN-HUFFMAN, INC. IN THE USA THE SAME AS OUR OTHER SYRINGES Autoclavable head assembly (after shutting off air & water supply to syringe and bleeding of pressure) head assembly can be removed for autoclaving at 275 F Quick disconnect tip from head by pushing in locking ring Locked in cartridge style air/water buttons 360 tip rotation Precise mist, air and water control Matte chrome finish DCI cross ref. # 3430 Valve wrench only Used for Series Syringe 10 11

8 ASEPSIS 3-WAY SYRINGE - PIN TYPE 3-WAY SYRINGE - PIN TYPE SYRINGES & WATER HEATERS Syringe Only $ Extra Asepsis 3-way Syringe $ Head Assembly - Pin Type, Less Handle SYRINGE WITH COILED ASEPSIS TUBING Black $ Gray $ Surf $ Sterling $ Surf $ SYRINGE W/ STRAIGHT ASEPSIS TUBING Black $ Gray $ Surf $ Sterling $ Surf $ Autoclavable head assembly (after shutting off air & water supply to syringe and bleeding of pressure) head assembly can be removed for autoclaving at 275 F Autoclavable quick disconnect aerator tip can separately be removed for sterilization Locked-in cartridge style Replaceable air/water cartridges 360 tip rotation Precise mist, air and water control Matte chrome finish 3-WAY SYRINGE Syringe Only $91.00 SYRINGE W/ COILED ASEPSIS TUBING Black $ Gray $ Surf $ SYRINGE W/ STRAIGHT ASEPSIS TUBING Black $ Gray $ Surf $ Locked-in cartridge style Replaceable air/water cartridges 360 tip rotation Precise mist, air and water control Autoclavable quick disconnect aerator tip for easy sterilization Syringe Only $89.80 SYRINGE W/ COILED ASEPSIS TUBING SYRINGES & WATER HEATERS ASEPSIS 3-WAY SYRINGE WITH QUICK DISCONNECT TIP Black $ Gray $ Syringe Only $ Surf $ NEW! Same as above except with ADEC style quick disconnect tip, Chapman-Huffman, Inc. number , ADEC cross ref. # No tools required for tip removal or insertion Tip and tip nut are bright chrome finish Order tubing separately SYRINGE W/ STRAIGHT ASEPSIS TUBING Black $97.20 Gray $97.20 Surf $97.20 Conventional valve core design 360 tip rotation Precise mist, air and water control Replaceable air/water buttons Autoclavable quick disconnect aerator tip for easy sterilization CAUTION: Do not use sterile sleeves or disposable tips with this syringe. 13

9 SINGLE SHOT AIR OR WATER SYRINGE WITH QUICK DISCONNECT TIP RESTORATIVE ULTRA DRY AIR SYRINGE WITH QUICK DISCONNECT TIP Syringe Only $89.10 Syringe Only $95.60 SYRINGES & WATER HEATERS SYRINGE W/ COILED TUBING Black $ Gray $ Surf $ SYRINGE W/ STRAIGHT TUBING Black $99.10 Gray $99.10 Surf $99.10 Single function for air or water Locked-in cartridge style Autoclavable quick disconnect aerator tip, remove from head by pushing in locking ring 360 tip rotation Matte chrome finish SYRINGE W/ COILED TUBING Black $ Gray $ Surf $ SYRINGE W/ STRAIGHT TUBING Black $ Gray $ Surf $ For AIR ONLY - single function Autoclavable quick disconnect tip, remove from head by pushing in locking ring Locked-in cartridge style air button Built-in air filter (housed inside handle) 360 tip rotation For use in restorative procedures where ultra dry air is needed Matte chrome finish SYRINGES & WATER HEATERS SINGLE SHOT - AIR OR WATER SYRINGE RESTORATIVE ULTRA DRY AIR SYRINGE Syringe Only $85.40 Syringe Only $92.30 SYRINGE WITH COILED TUBING Black $96.60 Gray $96.60 Surf $96.60 SYRINGE WITH COILED TUBING Black $ Gray $ Surf $ SYRINGE WITH STRAIGHT TUBING Black $96.60 Gray $96.60 Surf $96.60 Conventional valve core design Single function for air or water 360 tip rotation Replaceable air/water button Autoclavable quick disconnect aerator tip for easy sterilization SYRINGE WITH STRAIGHT TUBING Black $ Gray $ Surf $ For air only-single function Conventional valve core design For use in restorative procedures where ultra dry air is needed Built-in air filter (housed inside handle) 360 tip rotation Replaceable air button Autoclavable quick disconnect aerator tip for easy sterilization 15

10 CONTINENTAL SYRINGE WITH QUICK DISCONNECT TIP SYRINGE TIP AUTOCLAVABLE CHROME FINISH $6.20 Syringe Only $80.00 NEW! Pkg. of $28.90 Pkg. of $ SYRINGE WITH 7 STRAIGHT ASEPSIS TUBING Black $90.00 Gray $90.00 Surf $90.00 Syringe tip only Interchangeable with MARUS, ENGLE and older ADEC syringes Fits syringe , , , and SYRINGES & WATER HEATERS NEW! AUTOCLAVABLE CONTINENTAL 3-WAY SYRINGE Sterling $90.00 Surf $90.00 Quick Disconnect Tip is released by pushing in on locking ring tip rotation 360 Locked-in cartridge style air/water buttons Precise mist, air, water control Matte chrome finish DCI cross ref. # 3450 Syringe Only $ SYRINGE TIP AUTOCLAVABLE $7.60 MATTE CHROME FINISH Fits and series syringes Matte chrome finish AUTOCLAVABLE QUICK DISCONNECT $8.30 SYRINGE TIP Syringe tip only Fits , & series syringes with quick disconnect tip Matte chrome finish DCI cross ref. # 3060 FOREST cross ref. # SYRINGES & WATER HEATERS Syringe With 7 Straight Sheathed ASEPSIS TUBING ASSEMBLY Gray $ Surf $ Sterling $ Surf $ SYRINGE TIP RETAINER, NON-LOCKING KIT $19.90 NEW! Fits Chapman-Huffman, Inc. and ADEC syringes with push-pull style quick disconnect syringe tips Also fits some other dental syringes Bright nickel chrome finish ADEC cross ref. # Autoclavable head assembly (after shutting off air & water supply to syringe and bleeding off pressure) head assembly can be removed for autoclaving at 275 F Autoclavable quick disconnect aerator tip can separately be removed for sterilization 360 tip rotation Locked-in cartridge style Replaceable air/water cartridges Precise mist, air and water control Matte chrome finish SYRINGE TIP RETAINER, LOCKING KIT $29.90 NEW! Fits Chapman-Huffman, Inc. and ADEC syringes with push-pull style quick disconnect syringe tips Also fits some other dental syringes 360 tip rotation May be locked for cheek retraction Bright nickel chrome finish ADEC cross ref. #

11 PUSH-PULL STYLE AUTOCLAVABLE QUICK DISCONNECT SYRINGE TIP NEW! Pkg. of 5 ADEC # $39.00 Pkg. of 25 ADEC # $ Fits Chapman-Huffman, Inc. syringes with locking or non-locking style tip retainers Fits ADEC syringes that utilize push-pull style quick disconnect syringe tips Bright nickel chrome finish BARB FITTING $8.30 Used on syringe head (in) and (out) ports 8-32 X 1/16 barb Plated Pkg. of 10 CIRCULATING MANIFOLD ASSEMBLY $25.10 SYRINGES & WATER HEATERS SYRINGE WRENCH ADEC STYLE $3.95 NEW! Fits Chapman-Huffman, Inc. syringes with locking or non-locking tip nuts Fits ADEC syringes ADEC cross ref. # QUICK DISCONNECT TIP ADAPTER KIT $30.50 Brass Construction (3) 1/16 Barbs SYRINGE TIP KIT AUTOCLAVABLE $18.10 CHROME FINISH Tip adapter and O-ring Tip nut and O-ring Hex adapter wrench, 5/32 Tip and cone Tip nut wrench Fits syringe , , , and SYRINGES & WATER HEATERS Fits , & series syringes with quick disconnect tip Fits DCI Syringes DCI cross ref. # 3088 Small O-ring X-00 (pkg of 10) O-ring installed on adapter X-00 (pkg of 10) SYRINGE BUTTON RETAINER SCREW $25.20 SYRINGE TIP KIT AUTOCLAVABLE $21.60 MATTE CHROME FINISH Fits and series syringe Matte chrome finish on tip and tip nut Viton O-rings Fits autoclavable continental 3-way syringes , , , and ADEC cross ref. # Pkg. of 5 NYLON WASHER $4.60 Used with 8-32 fittings Pkg. of 25 SYRINGE VALVE O-RING KIT $9.60 Valve Core Wrench Only $5.20 This kit used for rebuilding syringe buttons and valve cores 18 19

12 SYRINGE REPAIR KIT $8.00 SYRINGE HEAD Q.D. ADAPTOR $12.50 SYRINGES & WATER HEATERS Fits Chapman-Huffman Inc Series Continental Syringe Fits DCI Quick Clean standard and continental syringes Non-autoclavable DCI cross ref. # 3066 NEW! SYRINGE REPAIR KIT WITH 2 BUTTONS $18.00 Fits Chapman-Huffman Inc Series Continental Syringe Fits DCI Quick Clean standard and continental syringes Non-autoclavable DCI cross ref. # 3098 NEW! AUTOCLAVABLE SYRINGE REPAIR KIT $9.80 Fits DCI Autoclavable standard and continental syringes DCI cross ref. # 3045 Fits Chapman-Huffman, Inc. syringes - series , and O-rings included 3-WAY SYRINGE CARTRIDGE $10.80 Fits ( ) 3-way syringe - pin type and ( ) 3-way circulating syringe - pin type Fits ENGLE DENTAL Syringe Button cross ref. # Requires Conical Compression Spring sold below Chrome plated button SYRINGE BUTTON WITH CONICAL SPRING DCI cross ref. # 3085 (Pkg. of 1) $10.80 DCI cross ref. # 3099 (Pkg of 10) $86.00 NEW! Fits Chapman-Huffman Inc , , Syringes Fits DCI QuickClean Standard and Continental Syringes Non-autoclavable SYRINGES & WATER HEATERS NEW! AUTOCLAVABLE VALVE CORE SYRINGE $8.80 REPAIR KIT Fits DCI Autoclavable valve core style syringes DCI cross ref. # 3072 NEW! SYRINGE BUTTON CONICAL SPRING ONLY DCI cross ref. # 9670 (Pkg. of 1) $1.50 ADEC cross ref. # (Pkg of 10) $12.50 Fits Chapman-Huffman Inc , , , , , , , and series syringes Fits DCI Quick Clean and autoclavable syringes with cartridge type buttons Fits ADEC cartridge type syringes SYRINGE BUTTON FOR AIR-WATER $9.00 Syringe button assembly fits syringe , and

13 SYRINGE VALVE CORE $6.00 Fits syringe , , Interchangeable with old style ADEC short valve cores cross ref. # F max Pkg. of 10 VALVE CORE SYRINGE BUTTON WITH SPRING DCI cross ref. # 3093 (Pkg. of 1) $9.20 DCI cross ref. # 3034 (Pkg. of 10) $88.00 NEW! Fits Chapman-Huffman Inc series valve core style syringes Fits DCI 3470 Quick Clean valve core style syringes SYRINGES & WATER HEATERS AUTOCLAVABLE 3-WAY SYRINGE $13.30 CARTRIDGE - PIN TYPE ADEC style replacement soft touch syringe button assembly Chrome plated button Autoclavable 275 Requires Conical Compression Spring sold on pg. 21 ADEC Cross ref. # (Prior to Oct. 1995) MARUS cross ref. # 21R428 AUTOCLAVABLE SYRINGE BUTTON WITH CONICAL SPRING Pkg. of $13.30 Pkg. of $ NEW! Fits DCI Autoclavable standard and continental syringes DCI cross ref. # 3086 VALVE CORE SYRINGE REPAIR KIT DCI cross ref. # $8.20 Fits Chapman-Huffman Inc series valve core style syringes Fits DCI 3470 Quick Clean valve core style syringes NEW! QUICK DISCONNECT TIP ADAPTOR KIT DCI cross ref.# $27.80 Fits Chapman-Huffman Inc series valve core style syringes Fits DCI Quick Clean syringes Non-autoclavable NEW! SYRINGES & WATER HEATERS VALVE CORE SYRINGE SPRING ONLY DCI cross ref. # 9674 Pkg. of $1.40 Pkg. of $10.00 AUTOCLAVABLE 3-WAY SYRINGE $13.20 CARTRIDGE -PIN TYPE Fits , , , & series syringes and ADEC syringe Autoclavable 275 Requires Conical Compression Spring sold on pg. 21 Matte chrome finish on button ADEC Old cross ref. # ADEC New cross ref. # (Beginning October 1995) Note: The new cross ref. # ADEC sells pkg. of 2. However Chapman-Huffman sells one at a time. NEW! Fits Chapman-Huffman Inc series valve core style syringes Fits DCI Valve Core Style Syringes AUTOCLAVABLE VALVE CORE SYRINGE $9.20 BUTTON WITH SPRING NEW! Fits DCI Autoclavable valve core style syringes DCI cross ref. #

14 2-BUTTON CONVERSION KIT $49.90 SYRINGE BUTTON REMOVAL TOOL $14.10 NEW! Converts single autoclavable rocker button to (2) autoclavable buttons Includes: (2) button valves, spacer, retainer screw, (2) springs and hex key ADEC cross ref. # Assists with the removal of syringe buttons that are stuck. The tapered design forces the button up and out as you push the tool under the button head Plastic construction SYRINGES & WATER HEATERS FOREST STYLE SYRINGE CARTRIDGE Non-Autoclaveable Black O-ring $10.70 Autoclavable Brown O-rings $13.10 Fits FORSTAR-3 syringe Cross ref. # non-autoclavable # autoclavable Requires service tool below for installation FOREST STYLE SYRINGE $30.40 CARTRIDGE ASSEMBLY Fits FOREST syringe # Includes (2) FOREST style sryinge cartridges and pin FOREST cross ref. # MINIATURE FLOW RESTRICTOR $4.90 For air or water flow control, ideal for handpiece drive air adjustment, or syringe flow adjustment Fits 1/4 or 1/8 OD tubing to restrict flow Brass construction, nickel plated SYRINGE FLOW RESTRICTOR $9.10 Adapts to standard and asepsis syringe 2 hole tubing for flow adjustment Brass construction, nickel plated ADJUSTABLE SYRINGE CONNECTOR BLOCK $27.60 SYRINGES & WATER HEATERS FOREST STYLE SYRINGE O-RING KIT Non-Autoclavable $6.60 FOREST cross ref. # Autoclavable $13.10 FOREST cross ref. # Nickel plated Brass construction Metering screws allow independent adjustment of air and water In ports - Barbs fit 1/8 ID X 1/4 OD tubing Out ports - Barbs fit 1/16 ID X 1/8 OD tubing Mounting screws Includes all O-rings and service tool for FORESTAR-3 Syringe ADJUSTABLE SYRINGE CONNECTOR BLOCK $30.80 FOREST STYLE SYRINGE SERVICE TOOL $3.80 Fits FORSTAR-3 syringe for removal of cartridge, tip adapter and barbs Cross ref. # Stainless steel construction Plastic construction Metering screws allow independent adjustment of air and water In ports - Barbs fit 1/16 ID X 1/8 OD tubing Out ports - Barbs fit 1/16 ID X 1/8 OD tubing Mounting screws FILTER FOR 1/8 O.D. AIR LINE $16.70 Replaceable filter element Typically used on syringe air line for ultra dry air Utilizes standard cotton rolls typically used in dental practice 24 25

15 WATER HEATER MANUAL ON/OFF 110 Volt $ Volt $ ECONOMY DISC TYPE FOOT CONTROL Gray $79.60 Sterling $79.60 Same features as standard foot control 6 diameter base plate Supplied with 7 of 2 hole asepsis tubing SYRINGES & WATER HEATERS 26 ADEC Style, Compact 2 Dia. X 4 High Adjustable thermostat for controlling water temperature Manual On/Off, 110 volt or 220 volt Reservoir type heater with quick recovery Continuous warm water to syringe & handpiece Finished in noncorrosive nickel plating Hospital grade cord with right angle plug on 110 volt model only. 220 volt model comes with cord less right angle plug. Note! Not recommended for use with self contained water system due to potential damage WATER HEATER WITH AIR ACTUATED ON/OFF 110 Volt $ Volt $ ADEC Style, Compact 2 Dia. X 4 High Adjustable thermostat for controlling water temperature Air actuated On/Off, 110 volt or 220 volt Reservoir type heater with quick recovery Continuous warm water to syringe & handpiece Finished in noncorrosive nickel plating Hospital grade cord with right angle plug on 110 volt model only. 220 volt model comes with cord less right angle plug. Note! Not recommended for use with self contained water system due to potential damage STANDARD DISC TYPE FOOT CONTROL Gray $88.90 Sterling $88.90 Variable speed Disc-type foot control for use with air turbine controls Pressure may be applied at any point 6 in diameter and 1 1/2 high Supplied with 7 of 2 hole asepsis tubing CHIP BLOWER FOOT CONTROL Gray $ Sterling $ Same features as standard foot control Push button chip blower valve Supplied with 7 of 3 hole tubing WET/DRY FOOT CONTROL Gray $ Sterling $ Same features as standard foot control On-Off toggle for coolant water Supplied with 7 of 3 hole tubing WET/DRY WITH CHIP BLOWER FOOT CONTROL Gray $ Sterling $ Same features as standard foot control Push button chip blower valve On-Off toggle for coolant water Supplied with 7 of 4 hole asepsis tubing SCALER TYPE FOOT CONTROL Gray $ Sterling $ Same features as standard foot control Push button valve for ON-OFF of ultrasonic scaler Air electric switch included Supplied with 7 of 3 hole tubing 27 FOOT CONTROLS

16 FOOT CONTROLS 28 RELAY TYPE FOOT CONTROLS STANDARD DISC TYPE FOOT CONTROL WITH RELAY Gray $ Surf $ Disc type foot control with relay for use with air turbine controls Pressure may be applied at any point 6 in diameter and 1 1/2 high Supplied with 7 of ADEC style asepsis 5 hole color and dash coded internal tubings ADEC cross ref. # Surf 6 CHIP BLOWER FOOT CONTROL WITH RELAY Gray $ Surf $ Same features as Standard Disc Type Foot Control with relay Push button chip blower valve Supplied with 7 of ADEC style asepsis 5 hole color and dash coded internal tubings WET/DRY FOOT CONTROL WITH RELAY Gray $ Surf $ Same features as Standard Disc Type Foot Control with relay On-Off toggle for coolant water Supplied with 7 of ADEC style asepsis 5 hole color and dash coded internal tubings ADEC cross ref. # WET/DRY CHIP BLOWER FOOT CONTROL WITH RELAY Gray $ Surf $ Same features as Standard Disc Type Foot Control with relay Push button chip blower valve On-Off toggle for coolant water Supplied with 7 of ADEC style asepsis 5 hole color and dash coded internal tubings ADEC cross ref. # Surf 6 SCALER TYPE FOOT CONTROL WITH RELAY Gray $ Surf $ Same features as Standard Disc Type Foot Control with relay Push button valve for ON-OFF of Ultrasonic Scaler Air electric switch included Supplied with 7 of ADEC style asepsis 5 hole color and dash coded internal tubings FOOT CONTROL RING KIT $12.30 Replacement for all Non-relay Type Chapman-Huffman Foot Controls Gray plastic Also replacement for DCI foot controls in the 6100, 6200, 6300 and 6400 series and foot controls 6001 and 6301 DCI cross ref. # 6046 RELAY TYPE FOOT CONTROL $12.20 REPLACEMENT RING KIT Replacement for all Relay Type Chapman-Huffman Foot Controls Black plastic Includes four mounting screws Also fits some ADEC foot controls cross ref. # RUBBER BUMPER PAD (FEET) $7.90 1/2 dia. bumper with self-adhesive back Gray color ADEC cross ref. # Pkg. of 25 WATER TOGGLE TOWER ASSEMBLY Gray $50.90 Sterling $50.90 Surf $50.90 Fits all Chapman-Huffman Foot Controls with Water Toggle Tower Assembly 3-way valve UNIVERSAL PILOT VALVE ASSEMBLY $11.80 Normally closed 3-way Replacement pilot valve for Water Toggle Tower Assemblies , and Replacement pilot valve for Scaler Tower Assemblies , and (Also fits Automatic Handpiece Holders , , , and ) 29 FOOT CONTROLS

17 CHIP BLOWER TOWER ASSEMBLY N/C 2-WAY VALVE Gray $50.90 Sterling $50.90 Surf $50.90 FOOT CONTROL REPAIR KIT $13.80 For repair of Chapman-Huffman foot controls. Economy Foot Control and Fits all Chapman-Huffman Foot Controls with Chip Blower Replaces Obsolete # beg. June 2005 PILOT VALVE N/C 2-WAY $20.10 FOOT CONTROL REPAIR KIT $27.60 FOOT CONTROLS SCALER TOWER ASSEMBLY FOOT CONTROL TOGGLE WITH PIN Fits Chapman-Huffman Foot Control Chip Blower Tower Assemblies Normally Closed 2-way valve Gray $50.90 Sterling $50.90 Surf $50.90 Fits all Chapman-Huffman Scaler Foot Controls 3-Way valve Gray $7.40 Sterling $7.40 Surf $7.40 Fits all Chapman-Huffman Foot Controls with Water Toggle Tower Assembly For repair of Chapman-Huffman foot controls. Standard Foot Controls and Chip Blower Foot Controls & Wet/Dry Foot Controls and Wet/Dry with Chip Blower Foot Controls and Scaler Type Foot Controls & RELAY TYPE FOOT CONTROL $ VALVE ASSEMBLY Fits all Chapman-Huffman Relay Type Foot Controls Mounting hardware and fittings included Replaces ADEC Foot Control II Valve and Foot Control I Valve Not for ADEC 500 Foot Control ADEC cross ref. # RELAY TYPE FOOT CONTROL REPAIR KIT $25.10 FOOT CONTROLS FOOT CONTROL POPPET Pkg of $8.10 Fits all Chapman-Huffman Relay Type Foot Controls For use with ADEC Foot Control III Valve Also fits ADEC 500 Foot Control ADEC cross ref. # Fits Chapman-Huffman Foot Controls , , , , , , , , , , , , , , , , , , , , , and Also fits ADEC Foot Control ADEC cross ref. # ADEC STYLE FOOT CONTROL II REPAIR KIT $15.90 NEW! Fits Foot Control II Valve ( ) ADEC cross ref. #

18 STANDARD DCI STYLE FOOT CONTROL $8.20 REPAIR KIT Fits DCI standard disc type foot control DCI cross ref. # 6161 SWIVEL COUPLER $ KAVO Style handpiece Coupler 4 hole standard Non-Fiber Optic Swivel Coupler KAVO cross ref. # 457/ DCI STYLE CHIP BLOWER / SCALER $8.60 FOOT CONTROL REPAIR KIT Fits DCI chip blower disc-type foot controls and disctype scaler foot controls (for 6305, 6307, 6314, 6320, 6321 and 6332) DCI cross ref. # 6162 DCI STYLE WET / DRY FOOT CONTROL $12.00 REPAIR KIT SWIVEL COUPLER $ KAVO Style Handpiece Coupler 5 hole Fiber Optic Standard Swivel Used with a fiber optic tubing having a fiber optic bundle to convey light to the Coupler & Handpiece KAVO cross ref. # 1390/ SWIVEL COUPLER $ KAVO Style Handpiece Coupler 6-Pin Bulb in Coupler Style Swivel Bulb included with Coupler Fits Chapman-Huffman 6-Pin tubings and others KAVO cross ref. # 460LE/ FOOT CONTROLS Fits DCI wet/dry disc-type Foot Controls DCI cross ref. # 6163 DCI STYLE SIGNAL RELAY $6.90 REPAIR KIT Fits DCI Foot Control with Relay (6400 Series) DCI cross ref. # 6165 FOOT CONTROL RING KIT $12.30 Replacement for all Non-relay Type Chapman-Huffman Foot Controls Also replacement for DCI Foot Controls in the 6100, 6200, 6300 and 6400 series and Foot Controls 6001 and 6301 Gray plastic DCI cross ref. # 6046 SWIVEL COUPLER WITH LED BULB $ SWIVEL COUPLER WITH WATER REGULATION KAVO style handpiece coupler with LED bulb 6-pin, bulb-in-coupler style swivel LED bulb included with coupler Fits Chapman-Huffman 6-pin tubing & others With LED must use transformer or LED Kit (see pg. 88) KAVO cross ref. # 460LED/ Coupler with Xenon bulb $ Coupler with LED bulb $ KAVO style handpiece coupler with water regulation 6-pin, bulb-in-coupler style swivel Bulb included with coupler Fits Chapman-Huffman 6-pin tubing & others With LED must use transformer or LED Kit (see pg. 88) KAVO cross ref. # w/ XENON BULB 465LRN/ KAVO cross ref. # w/ LED BULB 465LED/ QUICK COUPLERS & HP ACCESSORIES 32 33

19 QUICK COUPLERS & HP ACCESSORIES 34 SWIVEL COUPLER W&H STYLE, 4-HOLE $ W&H style handpiece coupler 4-hole, standard non-optic LED bulb included with coupler W&H cross ref. # RQ-04 SWIVEL COUPLER W&H STYLE, 6-PIN $ W&H style handpiece coupler 6-pin connection for LED or Halogen bulbs LED bulb included with coupler Fits W&H handpieces with internal bulb Fits Chapman-Huffman 6-pin tubing and others W&H cross ref. # RQ-24 SWIVEL COUPLER SIRONA STYLE, 6-PIN $ SIRONA style handpiece coupler 6-pin bulb in coupler style Fits Chapman-Huffman 6-pin tubing and others Xenon bulb included SWIVEL COUPLER SIRONA STYLE, 6-PIN $ SIRONA style handpiece coupler 6-pin, LED in coupler style Fits Chapman-Huffman 6-pin tubing and others With LED must use Transformer or LED Kit LED bulb included SWIVEL COUPLER NSK STYLE, 4-HOLE $ NSK style handpiece coupler 4-hole standard, non-optic NSK cross ref. # N10Ti SWIVEL COUPLER NSK STYLE, 6-PIN $ NSK style handpiece coupler 6-pin, bulb in coupler style Fits Chapman-Huffman 6-pin tubing and others Xenon bulb included NSK cross ref. # NL-10, NL-10Ti SWIVEL COUPLER NSK STYLE, 6-PIN $ NSK style handpiece coupler 6-pin, LED in coupler style Fits Chapman-Huffman 6-pin tubing and others With LED must use Transformer or LED Kit LED bulb included NSK cross ref. # NL-10-LED LT1011 LT1012 LT1013 LT1014 LT1015 LT1017 LT1018 LT1019 LT1020 LT1021 LT1022 CALL FOR PRICING SERVICE OIL LU1011 Premium Service Oil, 500 ml For maintenance of high and low speed handpieces, airmotors and air flow handpieces. Full synthetic, with mint scent. Choose from a large selection of lubrication tools for many brands. LU1022 Premium Service Oil, 500 ml For maintenance of high and low speed handpieces, airmotors and air flow handpieces. Full synthetic, with mint scent. Suitable for KaVo QUATTROcare 2 system. LU1031 Premium Service Oil, 500 ml For maintenance of high and low speed handpieces, airmotors and air flow handpieces. Full synthetic. Suitable for W&H Assistina and other maintenance units. LUBRICATION TOOLS Aluminium lubrication tool for MK-dent high speed handpieces HC40..M, HC60..M, HC7012M Aluminium lubrication tool for MK-dent high speed handpieces with KaVo connection and KaVo original high speed handpieces Aluminium lubrication tool for MK-dent and KaVo Low Speed Handpieces with INTRAmatic connection Aluminium lubrication tool for all FG and pushbutton spindles, Ø 1.6 mm Universal aluminium Lubrication Tool for 4-hole, 5-hole and 6-hole connections Aluminium lubrication tool for MK-dent high speed handpieces with Sirona connection and Sirona original high speed handpieces Aluminium lubrication tool for MK-dent high speed handpieces with W&H connection and W&H original high speed handpieces Aluminium lubrication tool for MK-dent high speed handpieces with NSK connection and NSK original high speed handpieces (CHQD connection system) Aluminium lubrication tool for MK-dent high speed handpieces with NSK connection and NSK original high speed handpieces (Ti-Max connection system) Aluminium lubrication tool for MK-dent high speed handpieces with Star connection and Star original high speed handpieces Aluminium lubrication tool for MK-dent high speed handpieces with Yoshida connection and Yoshida original high speed handpieces 35 QUICK COUPLERS & HP ACCESSORIES

20 HANDPIECE OIL COLLECTOR AND $65.10 MUFFLER ASSEMBLY Oil collector and muffler assembly for one to three handpieces Compact size jar 1 3/8 diameter X 1 1/4 long Filter element is a common gauze found in the dental office Minimum back pressure Can mount through unit base plate so jar can be removed for cleaning & filter element replacement Installation instructions ADEC cross ref. # MIDWEST QUIET-AIR STYLE BUR WRENCH $22.60 Fits MIDWEST QUIET-AIR handpiece Autoclavable MIDWEST 8000 / 8000i TRADITION STYLE $22.60 BUR WRENCH Fits MIDWEST 8000 & 8000i Tradition handpiece Autoclavable STAR 430 / VISTA STYLE BUR WRENCH Square $26.40 Hexagonal $26.40 HANDPIECE EXHAUST MUFFLER $17.70 Attaches to any four-hole handpiece tubing Particularly effective in quieting handpiece exhaust inside the control head Fits STAR handpieces as listed above Autoclavable STANDARD BUR WRENCH $22.20 Fits NSK, PANA-AIR, NAMINEX, TRUE-SPEED, HEALTHCO, SCHEIN, SUPER TRAC, SAFCO, CHAMPION, ATHENA AC 4000 and JOHNSON-PROMIDENT handpieces Autoclavable HSP HANDPIECE NUT SLEEVE $12.60 Fits Chapman-Huffman fiber optic handpiece tubing nut Installing this sleeve on Chapman-Huffman s fiber optic handpiece tubing nut, allows the nut to activate the HSP Auto Holder HANDPIECE ADAPTER $76.70 Adapts 4 hole MIDWEST type handpiece to two hole or three hole BORDEN handpiece hose connector QUICK COUPLERS & HP ACCESSORIES HANDPIECE ADAPTER $76.70 Adapts two hole or three hole BORDEN handpiece to a four hole MIDWEST type connector 4 HOLE HANDPIECE TUBING $9.80 CONNECTOR ASSEMBLY Connects 4 hole handpiece tubings together Plastic/brass construction QUICK COUPLERS & HP ACCESSORIES 36 37

21 BULBS & LED BULBS OPERATION & EXAMINATION REPLACEMENT BULBS BOYD INDUSTRIES (Op-Lite S-1700) BOYD cross ref. # V, 20W $ $11.40 ADEC (Cascade 6300 & prior) ( ) DENTECH EURODENT FARO (SUNLIGHT 70) (ORIGINAL UNITS) KNIGHT (MODEL L) LSM PLAN MECA (DELIGHT) SDS (1350) SIEMENS (A1/E1 SIRONA) ADEC (J. MORITA ) 24V, 150W OPERATION & EXAMINATION REPLACEMENT BULBS CONT $34.60 CASTLE (PANOVISION) RITTER H 120V, 125W $19.50 DENTAL-EZ (DISTINCTION) FARO (KOOLBEAM) FARO (S-90 SUNLIGHT) (SUNLIGHT 70 UPGRADED UNITS) (S2000) FOREST KNIGHT MANUFACTURING LUXSTAR MARUS (014R207) MARUS DENTAL PORTER DAYSTAR (S-90B) RITTER K (SUPER STARLITE) SCHEIN (CRUSADER) (STAR-BRITE) VACUDENT 24V, 150W BULBS & LED BULBS $21.00 Fits ADEC lights beginning July, 2007 Fits ADEC models 6300, all 300 and 500 series lights ADEC cross ref. # Also replaces old # MIDMARK Fits FOREST Operatory Lights 9040, 9050, 9060 FOREST cross ref. # V, 95W $26.10 Fits DANSEREAU Diamond Dental Light, 2000 to present DANSEREAU cross ref. # D V, 50W $12.50 ADEC (PERFORMER) ( ) AMPCO (CONTENDER) BELMONT (040, 045, 046, 047, 048, 049 & HLU) BELMONT (X-CALIBUR) CELUX CHAYES VIRGINIA (CHAYES LIGHT) DANSEREAU HEALTH PRODUCTS FIAD (THE LIGHT) HEALTHCO (ARISTOCRAT) (CELEBRITY) SDS (FANTASTIC 1300) 12V, 55W $31.50 RITTER J (STARLITE) 28V, 75W $26.10 Fits GENDEX Acucam GENDEX cross ref. # V, 75W $21.00 Fits DCI equipment light DCI cross ref. # 8684 JC24V, 100W $65.90 Fits BELMONT CLESTA LIGHT BELMONT cross ref. # / L-6A 24V, 60W BULB KIT $24.20 PELTON & CRANE (LFI, LFI+ and LFII ) PELTON & CRANE cross ref. # V, 150W $17.60 DENTAL-EZ and PROMA DARAY bulb kit Includes Instructions 12V, 55W $41.30 MDT (ROLUX I) ( ) 24V, 200W $48.50 MDT (ROLUX II) ( ) 30V, 50W 39

22 BULBS & LED BULBS 40 FIBER OPTIC & PHOTO CURING REPLACEMENT BULBS $72.20 O RYAN (OMEGA 110) (OMEGA 510) 120V, 150W $49.20 NSK (OPTICURE) (OPTICA FIBER OPTIC) 12V, 100W $46.90 COBY DEN-MAT (MARATHON 2) SCI CAN (DUAL LUX 3) (CURING) VIVADENT (HELIOMAT SINGLE FUNCTION VIVADENT B U.S.) 21V, 150W L.D. CAULK (PRISMA LITE) L.D. CAULK (PRI) 24V, 200W KERR MFG (COMMAND LIGHT) 21V, 150W $ $ $47.40 DARBY DENTAL (SUPERDENT 7500) DEN-MAT (VISAR 2) DOLAN JENNER (FIBERLITE 170, 176) KINETIC INSTRUMENTS (SUNLITE II) PENN MED (PENN MED 200L WAND) 21V, 150W $41.30 SCI CAN (DUAL LUX 2) (ILLUMINATOR) (DUAL LUX 3) (ILLUMINATOR) MIDMARK # 354 Surgery Light 21V, 150W $47.40 MIDWEST (ORAL ILLUMINATOR II, III) 21V, 150W FIBER OPTIC & PHOTO CURING REPLACEMENT BULBS CONT $64.40 BOSWORTH CO. (BOSWORTH LIGHT) DARBY DENTAL (SUPERDENT 5000, 8000) DEN-MAT (MARATHON) PENN MED (200 L ORIGINAL WAND) PHASEALLOY (WITELITE WAND) PRO DEN SYSTEMS (POLYLITE 500, 1000, 2000) 120V, 150W $36.30 Chapman-Huffman,Inc (Models , , AND ) DENTSPLY (TRIAD 2000) HEALTHCO (VLC ILLUMINATOR WAND) KAVO (VICON DLS) (VICON LS ILLUMINATOR) (VICON POLAR II) LARES (QUARTZ FIRE SX) MIDWEST (IN-SIGHT I, II) MIDWEST (TRADITION I) SCI CAN (DUAL LUX 2) (CURING) 120V, 250W $36.40 Chapman-Huffman,Inc (Model ) KAVO (LS 2 ILLUMINATOR) DCI cross ref. # V, 100W $51.60 DEMETRON (OPTILUX 400 HIGH OUTPUT) (OPTILUX 401 HIGH OUTPUT) (OPTILUX 403 HIGH OUTPUT) DEN MAT (CERI LIGHT) EFOS (EFOS LITE) HENRY SCHEIN (SCHEIN VCL 300) KINETIC INSTRUMENTS (SUNSPOT) KULZER INC. (TRANSLUX CL) L.D. CAULK (PRISMETIC LITE) PRO DEN SYSTEMS (EXECUTOR) S.S. WHITE (PROFILE VCS) TELEDYNE GETZ (FOCUS ACTIVATOR) 12V, 100W $39.80 DEMETRON (OPTILUX 50, 150) EFOS (EFOS 35) FARO P287 (POLYMERIZING LAMP) HEALTHCO (ARISTOCRAT II GUN NEW) L.D. CAULK (MAXLITE) PATTERSON TCL 390 SCHEIN MAXIMA 250 VIVADENT (HELIOLUX) (HELIOLUX 2) WEIL DENTAL (ELCELUX) 14V, 35W 41 BULBS & LED BULBS

23 BULBS & LED BULBS 42 FIBER OPTIC & PHOTO CURING REPLACEMENT BULBS CONT $50.80 ALMORE (OP II) COLTENE/WHALEDENT (COLTOLUX 2, 3, 4) DARBY DENTAL (SUPERDENT 2001, 2500) DEGUSSA (DEGULUX NORTH AMERICA) (DEGULUX EUROPE) DEMETRON (OPTILUX 101, 400, 401 & 403) DEMETRON (VCL 100, 200, 300) DENTAMERICA (LITEX 660, 680) DENTSPLY (QHL) DETREY (PRISMETICS EUROPE) FIRST MEDICA (HILUX 200) HEALTHCO (ARISTOCRAT I GUN) LARES (APOLLO CP) LASAC TECH (LTI ) MEGADENTAL (MEGALUX) MEGA-PHYSIK (CROMALUX 100) MOTLOID (COMPOLITE 660) O RYAN (OMEGA 750) PENN MED (PENN MED 300 L) (PENN MED 310 GUN) PHASEALLOY (WITELITE GUN) SCHEIN ECONOMY (CU80) SPECTRUM (800) UNITEK (ORTHOLUX, ORTHOLUX XT) VIVADENT (HELIOLUX GT) WYKLE RESEARCH (WITELITE 1500) 3M (VISILUX I, II) (XL 3000) 12V, 75W $68.00 DEMETRON (OPTILUX 360) DENTSPLY SPECTRUM Curing Light DENTSPLY cross ref. # V, 52W $77.40 KAVO CURING LIGHT POLYLUX II KAVO cross ref. # DEMETRON/KERR OPTILUX: 100, 101, 300, 380, 400, 401, 402, 403, 405, 500, 500 WITH P.C. BOARD, 501, LC 3M-ESPE 2500, PATTERSON TCL 490+, PATTERSON DENTAL CAM, SCHEIN MAXIMA 480, SCHEIN MAXIMA Pure Power DEMETRON/KERR cross ref. # V, 80W $26.60 MEGA PHYSIK (DENTALUX OPTIMECA 250) (OPTIMA 250) 24V, 250W IMAGING SYSTEMS REPLACEMENT BULBS $49.20 NEW IMAGE IND. (ACUCAM 12V 100W) (INTRA VIEW) 12V, 100W $46.90 LESTER A DINE (ORAL SCAN) 21V, 150W $41.30 TROJAN R&D (ULTRAEYE) 21V, 150W $36.30 CYGNUS INSTRUMENT (CYGNASCOPE) NEW IMAGE IND. (ACUCAM 120V 250W) ORAL VISION (ORAL VISION) PRO DENTEC (ORAL VIDEO SCOPE) PRO VISION IMAGING (PRO VISION DIS) 120V, 250W $50.80 PRO DEN CAMERA (PROSCOPE 2000, 4000) 12V, 75W $77.40 FITS DEMETRON/KERR OPTILUX: 100, 101, 300, 380, 400, 401, 402, 403, 405, 500, 500 with P.C. Board, 501, LC DEMETRON/KERR cross ref. # Fits: 3M-ESPE 2500, PATTERSON TCL 490+, PATTERSON DENTAL CAM, SCHEIN MAXIMA 480, SCHEIN MAXIMA Pure Power Fits: KAVO POLYLUX II KAVO cross ref. # V, 80W $23.00 Fits PLANMECA Panoramic 2002 EC or MC X-Ray Used for alignment/positioning (3) are required PLANMECA cross ref. # V, 10W 43 BULBS & LED BULBS

24 BULBS & LED BULBS HANDPIECE ILLUMINATION REPLACEMENT BULBS $56.40 Chapman-Huffman, Inc Illumination Systems Lamp Specifications: 3.5 V, 720 MA Body dia..160 (4.07mm) Overall Length.856 (21.74mm) Pin length.170 (4.32mm) Pin dia..020 (.51mm) May be used with AC or DC voltage HANDPIECE ILLUMINATION REPLACEMENT BULBS CONT $48.50 Fits KAVO LUX COUPLER (See below) Fits MK-DENT COUPLER (BU7012) Lamp Specifications: Body dia..180 (4.57mm) Overall length.457 (11.60mm) Bulb dia.149 (3.78mm) 3.5 Volt, 740 MA BULBS & LED BULBS $68.80 ADEC (FOCUS # ) Lamp Specifications: 3.5 Volts, 750 MA Body Dia..187 (4.75mm) Overall Length.810 (20.58mm) Pin length.136 (3.46mm) Pin Dia..020 (.51mm) $36.80 FITS ADEC / W&H HANDPIECES 896, 898, 898-LE Fits SYNEA TA-96L and TA-98L 3.5 Volt, 750 MA ADEC cross ref. # Fits MK-DENT handpieces cross ref. # BU7012WH $48.90 MIDWEST (cross ref. # ) Lamp Specifications: 3.5 VAC, 740 MA Body dia..149 (3.78mm) Overall length.648 (16.46mm) Pin length.132 (3.36mm) Pin dia..030 (.76mm) DENTSPLY / MIDWEST cross ref. # is sold in pkg. of two. However, Chapman-Huffman sells this lamp one at a time $60.00 Fits MIDWEST XGT, STYLUS and STYLUS ATC handpieces 3.5 volt, 750MA MIDWEST cross ref. # R Pkg. of $31.70 Fits KINETIC-360 handpiece, KINETIC-360 tubing Lamp Specifications: 3.5 Volts, 740 MA Body dia..189 (4.8mm) Overal length.918 (23.3mm) Pin Length.264 (6.7mm) Pin dia..039 (1.0mm) KINETIC cross ref. # 1222 SCHEIN cross ref. # Xenon lamp $90.20 FOREST ( ) BEAVERSTATE ( ) Lamp Specifications: 3.5 VAC, 720 MA Body dia..187 (4.75mm) Overall length.809 (20.56mm) Pin length.131 (3.33mm) Pin dia..032 (.81mm) BLACK GASKET RED GASKET KAVO cross ref. Old # or New # is sold in pkg. of two. However, Chapman-Huffman sells this lamp one at a time. Pkg. of $36.80 Pkg. of $ Fits NSK coupler 3.5 Volts, 750 MA NSK cross ref. # Y $46.80 DABI ATLANTE (# /2) Fits DABI ATLANTE MSL 350 torque handpiece Lamp Specifications: Body dia..180 (4.57mm) Overall length.457 (11.60mm) Bulb dia..149 (3.78mm) 3.5 Volt, 740 MA $72.30 Lamp Module Assembly 5-Hole 3.5 V, 720 MA black gasket Fits the following: DCI cross ref. # 8773 SCHEIN MASTERLIGHT cross ref. # SCHEIN cross ref. # MIDWEST LIGHTPAK cross ref. # KINETIC cross ref. # 1212 MIDMARK cross ref. # May be used with AC or DC Voltage $ Hole Lamp Module For use with DCI s current ISO Fiber Optic Tubing, 3.5 VDC, 720 MA Red gasket Ultra high pressure provides 50% more bright light and longer bulb life DCI cross ref. # hole Gasket - Red $

25 BULBS & LED BULBS HANDPIECE ILLUMINATION REPLACEMENT BULBS CONT $83.90 Lamp for MIDWEST E-STYLUS Electric Handpiece MIDWEST cross ref. # Pkg. of 2 LED BULB $ Use in Chapman-Huffman Handpiece Illumination System - LED style LED bulb specifications: 3.4V, 100 MA Body Dia.160 (4.07mm) Overall length.808 (20.52mm) Pin length.138 (3.5mm) Pin Dia.020 (.51mm) Use with 3.4 volts DC voltage only BULBS & LED BULBS Pkg of $73.90 Fits STAR coupler 3.3 Volts 1.3 A STAR cross ref. # LED BULB $74.40 Fits MIDWEST E-STYLUS Electric Handpiece Pkg of $36.80 Pkg of $ LED BULB $74.40 Fits BIEN-AIR coupler 3.5 Volts 750 MA BIEN-AIR cross ref. # (Old #) (New #) Fits NSK NL Motors LED BULB $74.40 Pkg of $36.80 Pkg of $ Fits NSK NL Motors TIM40 and TI205L Fits BIEN-AIR micromotors 3.3 Volts 750 MA BIEN-AIR cross ref. # (Old #) (New #) Also fits ADEC EB-40LT Electric Handpiece ADEC cross ref. # LED BULB $74.40 Fits NSK Quick Connector cross ref. # $36.80 Fits SIRONA SL motor (SIRONA GREEN) 3.5 Volts 750 MA SIRONA cross ref. # (Old #) (New #) LED BULB $74.40 Fits SIRONA Quick Connectors cross ref. # $36.80 Fits SIRONA coupler (SIRONA BROWN) 3.5 Volts 750 MA SIRONA cross ref. # LED BULB $74.40 Fits SIRONA Turbines and SIRONA Motors 46 47

26 BULBS & LED BULBS LED BULB $74.40 Fits W&H Turbines Fits ADEC 896, 898, 898LE, TA-98L, TA-96L LED BULB $74.40 Fits BIEN-AIR Motors LED BULB $74.40 LED BULB $74.40 Fits ADEC / W&H Airmotor LT25 LED BULB $74.40 Fits ADEC / W&H electric motors EA-40LT, EA-50LT, EA-51LT AND A-25LT The above part numbers were designed with halogen bulbs. They require either Chapman-Huffman Inc. Transformer or ADEC Adaptor No Fits EA-52 LED BULBS & LED BULBS Fits BIEN-AIR Quick Connectors LED BULB $74.40 Fits ADEC / W&H RA-24 Roto Quick coupler LED BULB $74.40 Fits STAR Quick Connector LED BULB $74.40 Fits CASTILINI handpieces LED BULB $74.40 Fits the following Swivel Couplers Chapman-Huffman , KAVO Multiflex MK-DENT QC5016, QC5016K KAVO cross ref. # LED BULB $74.40 Fits YOSHIDA coupler LED BULB $74.40 LED BULB $74.40 Fits KAVO Motors Fits FARO turbine 48 49

27 NEW - DENTAL LIGHT REFLECTOR Fits PELTON & CRANE LFI and LFI+ PELTON & CRANE cross ref. # New manufactured reflector Four year warranty on optics coating $ LENS SPLASH SHIELD $10.20 Fits PELTON & CRANE LFI & LFI+ Cross ref. # LENS SPLASH SHIELD $13.70 Fits PELTON & CRANE LFII Two Piece set Cross ref. # LIGHT PARTS NEW - DENTAL LIGHT REFLECTOR $ Fits PELTON & CRANE LFII PELTON & CRANE cross ref. # New manufactured reflector Four year warranty on optics coating LENS SPLASH SHIELD - RITTER $16.70 Fits RITTER J STARLITE & RITTER K Super STARLITE and KNIGHT K Hole Dia LENS SPLASH SHIELD - SCHEIN / MARUS $16.70 Fits SCHEIN/MARUS Lights Cross ref. # 52R430 Hole Dia LIGHT PARTS NEW - DENTAL LIGHT REFLECTOR $ Retainer Ring $5.10 (For retaining lens splash shield) Fits models with handles RITTER J STARLITE cross ref. # RITTER K SUPER STARLITE cross ref. # HENRY SCHEIN cross ref. # KNIGHT K New manufactured reflector Four year warranty on optics coating MARUS TYPE SAFETY COVER/ $16.10 LENS SPLASH SHIELD Fits MARUS DENTAL light with newer bridge Shield incorporates 3 notches for birdcage MARUS cross ref. # 70-52R430 (replacement lens shield only) Hole ø LENS SPLASH SHIELD - KNIGHT L $28.30 Fits KNIGHT L operation / examination light KNIGHT/MIDMARK cross ref. # / Hole ø NEW - DENTAL LIGHT REFLECTOR Fits models without handles KNIGHT L cross ref. # MARUS cross ref. # 52R412 HENRY SCHEIN cross ref. # 52R412 New manufactured reflector Four year warranty on optics coating $ RETAINER RING $5.10 Fits RITTER, SCHEIN, and MARUS older lights for retaining lens splash shield Also fits KNIGHT K LENS SPLASH SHIELD $9.90 Fits HEALTHCO Aristocrat Lights with square handles Fits Belmont X-Caliber Dental Light with square handles BELMONT cross ref. # HLU

28 LENS SPLASH SHIELD $8.30 Fits BELMONT X-Caliber Dental Lights 046, 047, 048 and 049 with oval handles BELMONT cross ref. # B FLAT HEAD SOCKET CAP SCREW - BLACK PELTON & CRANE Cross Ref. #S Also Cross Ref X 3/ $ X 1/ $ X 3/ $.90 MECHANICAL SPRING UNIT MOUNT ASSEMBLY $ Fits PELTON & CRANE LFII & LFCII-D light arms LIGHT PARTS Fits PELTON & CRANE LFII unit mount lights and LFWII Wall Mount Light PELTON & CRANE cross ref. # MECHANICAL SPRING CEILING $ MOUNT ASSEMBLY ARM ADAPTER KIT $75.90 Fits PELTON & CRANE lights LFII, LFCII & LFCII-D, rear arm to front arm assembly Not painted, Aluminum construction Includes (2) set screws PELTON & CRANE cross ref. # (Old #) HB (New #) SNUBBING PIN KIT $37.50 LIGHT PARTS Fits PELTON & CRANE ceiling mount lights LFCII, LFCII-D, LFTII, LFTII-D and LFWII Wall mount lights PELTON & CRANE cross ref. # Fits PELTON & CRANE LFII, LFCII & LFCII-D Lights SNUBBING PIN $36.50 GAS SPRING ADJUSTMENT TOOL $34.70 Fits PELTON & CRANE LFII, LFCII & LFCII-D Lights Nickel plated steel construction PELTON & CRANE cross ref. # / Fits PELTON & CRANE LFII lights 5/16 hex Used to assist in removal of gas spring or its adjustment PELTON & CRANE cross ref. # WAVE WASHER $5.10 Fits PELTON & CRANE LFII, LFCII & LFCII-D Lights PELTON & CRANE cross ref. # / SCREW KIT $13.70 Fits PELTON & CRANE LFII Unit and Ceiling mount light arms Four x 1/2 flat head socket cap screws PELTON & CRANE cross ref. # FLAT WASHER $5.10 Fits PELTON & CRANE LFII, LFCII & LFCII-D Lights PELTON & CRANE cross ref. # / KNUCKLE HINGE SCREW $9.00 Fits PELTON & CRANE LFII, LFCII & LFCII-D Lights PELTON & CRANE cross ref. #

29 REFLECTOR PIVOT BUSHING Pkg of $21.00 TROLLEY BRACKET ASSEMBLY $74.90 Fits trolley to track power cord and wire harness connection Trolley fits PELTON & CRANE Lights LF Series, LF+ Series, LFT+, LFT II, and LFT II D (Except older models with contact strip) PELTON & CRANE cross ref. # Fits PELTON & CRANE LFII light yoke and frame assembly Plastic construction PELTON & CRANE cross ref. # (Old) (Pkg 1) (New) (Pkg 2) DRIFT SCREW KIT $51.50 Fits PELTON & CRANE LF and LF+ series PELTON & CRANE cross ref. # NOTE! If you are replacing the original Trolley Bracket Assembly with you must also replace the Wire Harness The connectors on the original assemblies are obsolete. WIRE HARNESS $62.00 Trolley fits PELTON & CRANE Track Lights, LF Series, LF+ Series, LFT+, LFT II & LFT II D (Except older models with contact strip) Plugs into trolley bracket assembly connector (Chapman-Huffman above) and lays in track to supply light head power. PELTON & CRANE cross ref. # LIGHT PARTS LIGHT SOCKET $20.70 Fits PELTON & CRANE LFI Light PELTON & CRANE cross ref. # LIGHT PARTS LIGHT SOCKET $24.00 NOTE! If you are replacing the original Wire Harness w/ you must also replace the Trolley Bracket Assembly The connectors on the original assemblies are obsolete. Fits PELTON & CRANE LFII Light PELTON & CRANE cross ref. # SOCKET RETRACTOR TOOL $26.10 For removal and installation of bulb in PELTON & CRANE LFI and LF+ lights PELTON & CRANE cross ref. # LIGHT CABLE KIT $ Fits all 6300 Lights prior to April 1, 2004 NEW! For RADIUS or CASCADE lights Includes cable lube, crimp nuts and instructions 137 long cut to desired length Surf 6 color jacket ADEC cross ref. # INTENSITY SWITCH $50.00 PELTON & CRANE STYLE LIGHT ARM WIRE $2.10 Exact replacement for PELTON & CRANE LFI and LFII light arm wire Color white Cross ref. # NEW! Fits ADEC 6300 Wall, Track, Preference and Ceiling Mount dental Lights before serial number D Fits all RADIUS and CASCADE Lights Includes attached wires, installation instructions and connectors ADEC cross ref. # POWER SWITCH ASSEMBLY $22.90 Fits PELTON & CRANE LFI and LFII lights Weld Fuse Bond Connecting is used to attach wire leads to switch terminals PELTON & CRANE cross ref. # / LIGHT SOCKET ASSEMBLY $15.20 Fits ADEC PRE-CASCADE and CASCADE lights Includes installation hardware ADEC cross ref. # (Old #) (New #)

30 ON-OFF LIGHT SWITCH $60.00 Fits ADEC PRE-CASCADE, CASCADE and PERFORMER lights Includes toggle switch and (2) closed end splices NOTE: Rubber toggle extension is not included re-use existing one from old switch ADEC cross ref. # LIGHT SOCKET $45.50 Ceramic socket High temp. lead wires Fits L.S.M. lights L.S.M. cross ref. # 0247 LIGHT PARTS AIR ELECTRIC SWITCH N/O OR N/C $ PSI activation VAC Fits A-DEC master control - dental light Fits A-DEC power supplies 25W, 150W, and 300W ADEC cross ref. # LAMP SOCKET ASSEMBLY $47.80 MARUS cross ref. # 52R190 SCHEIN cross ref. # 52R190 RITTER K cross ref. # LIGHT PARTS LIGHT SOCKET ASSEMBLY $39.90 HARNESS, LIGHT POLE $48.20 Fits FOREST dental lights Models: FOREST cross ref. # Fits MARUS dental lights 111 long, 4-conductors (black, white, green, red) MARUS cross ref. # 52R137 ON-OFF TOGGLE SWITCH $ V, 6A FOREST cross ref. # Fits FOREST dental lights 9040, 9041, 9045, 9046, 9050, 9051, 9060, 9061, 9065, and 9066 Supplied without rubber toggle bat extension reuse the one from old switch MARUS DENTAL TYPE LIGHT $ TRANSFORMER Fits MARUS DENTAL post mount, ceiling mount and track lights using the following MARUS cross ref. # 015R021-2 LIGHT SOCKET $45.50 Fits KNIGHT L WIRE HARNESS UNIT (POST MOUNT LIGHT) $41.90 Fits MARUS Post Mount Flex Arm (52R103) MARUS cross ref. # 52R

31 LIGHT PARTS WIRE HARNESS (FLEX ARM TRACK LIGHT) $41.90 Fits MARUS Track Light Flex Arm (52R302) MARUS cross ref. # 52R339 Also includes MARUS part number 014R078 type replacement connector WIRE HARNESS 52 (FLEX ARM CEILING LIGHT) $41.90 Fits MARUS Ceiling Light Flex Arm (52R178) MARUS cross ref. # 52R275 LAMP HOLDER SOCKET ASSEMBLY $19.60 LOW VOLTAGE POST MOUNT EXTENSION KIT PELTON & Crane Type $ Adapter, White Post & Bracket PELTON & CRANE Type $ Adapter, Plated Post & Clear Anodized Bracket RITTER Type Adapter $ White Post & Bracket RITTER Type Adapter $ Plated Post & Clear Anodized Bracket Designed for use with 2 diameter post 24 light post Dual post mount bracket Light adapter bushing 8 gray extension cord LIGHT PARTS Fits MDT Rolux light and others 24 volt - low voltage rated 60 volt max MDT cross ref. # Also fits other low voltage applications Socket is designed to the ANSI codes and international standards Lamp holders are UL and CSA approved LAMP HOLDER SOCKET ASSEMBLY $21.50 HIGH VOLTAGE LIGHT POST ADAPTER BUSHING $29.10 PELTON & CRANE STYLE Fits: PELTON & CRANE, ADEC, MARUS, BELMONT, MDT and KNIGHT L 1 7/8 OD x 3 Long Plastic construction Fits Chapman-Huffman Light Source , , and Also fits MIDWEST Insight Light Source 120 volt - high voltage rated 300 volt max Also fits other high voltage applications Socket is designed to the ANSI codes and international standards Lamp holders are UL and CSA approved LIGHT POST ADAPTER BUSHING $29.10 RITTER STYLE Fits: RITTER, DENTAL-EZ, PROMA, FARO and FOREST 1 7/8 OD X 3 LONG Plastic construction 58 UNIVERSAL ELECTRICAL TOGGLE SWITCH $11.50 On-Off toggle 10 amp, 125 VAC; 8 amp, 125 VDC; 4 amp, 250 volts AC/DC 6 tinned wire leads 1/2 diameter mounting hole required Also fits older CASTLE Type 4 lights Mounting hardware DUAL POST MOUNT BRACKET White $69.30 Clear Anodized $69.30 Designed to clamp two 2 diameter light posts together Powder coated or anodized 59

32 8 EXTENSION CORD $16.80 ADEC STYLE DUAL WHEEL CASTER $10.40 Plastic wheel with soft surface for use on tile floor Light gray color ADEC cross ref. # (one each) 8 long Color Gray 16/3 SJT CHAIR & STOOL PARTS BRAKE CABLE ASSEMBLY $52.20 Fits ADEC Priority 1005 Chair ADEC cross ref. # Includes cable assembly and nut ARMREST STOP SCREW $13.70 STANDARD DUAL WHEEL CASTER Stainless steel construction Fits DENTAL-EZ JS and VS chairs DENTAL-EZ cross ref. # Black $12.60 Gray $12.60 Smooth rolling 2 diameter dual wheel caster Fits H frame mobile stand and U frame mobile stand Used as replacement for doctor and assistant stools with aluminum bases where pivot pin measures 7/16 diameter X 7/8 long with friction ring SOFT TIRE DUAL WHEEL CASTER Gray $17.40 Special soft rubber tire Smooth rolling 2 diameter dual wheel caster Used as replacement for doctor and assistant stools with aluminum bases where pivot pin measures 7/16 diameter X 7/8 long with friction ring Caster is all gray except for the thin black soft rubber portion that meets floor surface, as pictured DOCTOR S STOOL REPLACEMENT $ CYLINDER Fits ADEC Doctor s PRE-CASCADE Stools Model 1600, cross ref. # ASSISTANT S STOOL REPLACEMENT $ CYLINDER Fits ADEC CASCADE and PRE-CASCADE Assistant s Stools model 1620 manufactured after June 1993 ONLY, cross ref. # OFFICE STOOL REPLACEMENT $44.90 CYLINDER Fits typical office chairs with gas lift cylinder and column dia. of 50mm (1.968 ) Black color NEW PELTON & CRANE $ CHAIRMAN STYLE PCB New manufactured circuit board by Chapman-Huffman Exact replacement for PELTON & CRANE CHAIRMAN PELTON & CRANE cross ref. # CHAIR & STOOL PARTS ADEC STYLE DUAL WHEEL CASTER $10.40 ADEC cross ref. # (one each) ADEC dark surf Plastic wheel with soft surface for use on tile floor NEW PELTON & CRANE $ COACHMAN II STYLE PCB New manufactured circuit board by Chapman-Huffman PELTON & CRANE COACHMAN II Programmable style circuit board PELTON & CRANE cross ref. # NOTE! This circuit board also works in the Coachman manual chair cross ref. # PCB assembly low voltage 60 61

33 NEW DENTAL-EZ ELEGAN STYLE $ CIRCUIT BOARD New manufactured circuit board by Chapman-Huffman Exact replacement for DENTAL-EZ ELEGAN chair DENTAL-EZ cross ref. # or PUSH-BUTTON SWITCH $12.50 NEW! Fits ADEC Multi-Function Foot Switch - for autoreturn and pre-positioning functions SPST 5A, 24VAC ADEC cross ref. # ROCKER SWITCH $13.40 NEW DENTAL-EZ J-V SERIES STYLE $ CIRCUIT BOARD New manufactured circuit board by Chapman-Huffman Exact replacement for DENTAL-EZ J-V SERIES chair DENTAL-EZ cross ref. # or NEW! Fits ADEC Multi-Function Foot Switch 10A, 125/250 VAC ADEC cross ref. # TRUSS HEAD SLOT SCREW - PKG. OF $12.00 NEW DENTAL-EZ E-2000 STYLE $ CIRCUIT BOARD New manufactured circuit board by Chapman-Huffman Exact replacement for DENTAL-EZ E-2000 and ADVANT-AGE chairs DENTAL-EZ cross ref. # NEW! #2-56 X 1/8 Long Stainless Steel Fits ADEC two-piece hydraulic manifolds to retain flow adjustment screws Pkg. of 5 ADEC cross ref. # BUTTON HEAD SOCKET SCREW - PKG. OF $8.00 CHAIR & STOOL PARTS CIRCUIT BOARD $74.90 NEW! Fits PELTON & CRANE CHAIRMAN 5000 series foot control, all models PELTON & CRANE Cross ref. # POTENTIOMETER $ /2W, 10K OHM rating Fits MARUS, SCHEIN and PELTON & CRANE CHAIRS Cross ref. # 015R017 POTENTIOMETER $21.80 NEW! #4-40 X 3/16 Long Fits ADEC one-piece hydraulic manifolds to retain flow adjustment screws Pkg. of 5 ADEC cross ref. # /2 PLASTIC HOLE PLUG $2.50 NEW! White Color Fits ADEC 311 Chair Pkg. of 1 ADEC cross ref. # LIFT SWITCH $40.70 Fits PELTON & CRANE CHAIRMAN patient chair PELTON & CRANE cross ref. # Also fits E2000 chair 6A, 125V CHAIR & STOOL PARTS NEW! 1W, 5K OHM Rating Flatted Shaft Fits ADEC CASCADE, DECADE and PERFORMER II & III chairs ADEC cross ref. # FORMED LEVER SWITCH $29.40 Fits PELTON & CRANE CHAIRMAN patient chair PELTON & CRANE cross ref. #

34 ROLLER SWITCH $29.40 Fits PELTON & CRANE CHAIRMAN patient chair PELTON & CRANE cross ref. # NOTE! For PELTON & CRANE cross ref. # Matched Switch Assembly (purchase two of the switches) ON-OFF-ON SWITCH REPLACEMENT KIT $27.70 Used for operation of chair seat and back motors on DENTAL-EZ chairs Installation instructions and hardware included Cross ref. # TRAVERSE LIMIT SWITCH $33.30 Fits PELTON & CRANE CHAIRMAN patient chair PELTON & CRANE cross ref. # COILING WIRE ASSEMBLY $ Fits PELTON & CRANE CHAIRMAN PELTON & CRANE cross ref. # BACKREST / BASE SWITCH $62.60 Momentary Fits ROYAL Dental Chair, for backrest up-down and base up-down functions (3).250 wide terminals Black NOTE! ROYAL Dental cross ref. # 6445 / black is sold in pkg of 2. Chapman-Huffman sells this switch one at a time AUTO-RETURN SWITCH $64.80 CHAIR & STOOL PARTS OPERATE SWITCH ASSEMBLY $57.30 Fits PELTON & CRANE CHAIRMAN patient chair Red push button PELTON & CRANE cross ref. # EXIT SWITCH ASSEMBLY $57.30 Fits PELTON & CRANE CHAIRMAN patient chair Black push button PELTON & CRANE cross ref. # MOMENTARY SWITCH REPLACEMENT KIT $27.70 Momentary switch for individual operation of chair motors on DENTAL-EZ JS/VS series chairs Installation instructions and hardware included Cross ref. # AUTO POSITION SWITCH REPLACEMENT KIT $27.70 Automatic position switch for use in DENTAL-EZ JSA / VSA chairs Smooth ASEPSIS type rocker Installation instructions and hardware included Cross ref. # SOLENOID Fits ROYAL Dental Chair for chair auto-return function (6).250 wide terminals Royal Dental cross ref. # Black A-DEC Cross ref. #: Yellow wires, 100V $ Black wires, 120V $ Red wires, 240V $95.60 O-Ring (Pkg. of 5) V-00 $5.80 Fits ADEC CASCADE, DECADE, PERFORMER III & POSITIONER chairs 1/16 Orifice SOLENOID $ O-Ring (Pkg. of 5) V-00 $5.80 Solenoid fits ADEC Priority chair Includes seal White wires 24VDC 1/16 Orifice ADEC cross ref. # CHAIR & STOOL PARTS 64 65

35 ACCESSORIES & O-RINGS 66 AUXILIARY CLEAN WATER SUPPLY SYSTEM Assembly with 750 ml Bottle $ Assembly with Large Capacity Bottle $ ml Heavy Duty Bottle Only $10.90 Large Capacity Heavy Duty Bottle Only $15.20 Gasket $5.80 For antiseptic coolant or water Easy to install with installation instructions L bracket mounts to any flat vertical surface. Order post mount kit for mounting to post On-off air supply toggle valve, with tubing Regulator, preset at factory Water pressure gauge Heavy Duty Plastic Bottle is not autoclavable IMPORTANT! AUXILIARY CLEAN WATER SUPPLY SYSTEMS ARE NOT RECOMMENDED FOR USE WITH WATER HEATERS AUXILIARY CLEAN WATER SUPPLY SYSTEM Assembly with Bottled Water/Air Purge Function Assembly with 750 ml Bottle $ Assembly with Large Capacity Bottle $ ml Heavy Duty Bottle Only $10.90 Large Capacity Heavy Duty Bottle Only $15.20 Gasket $5.80 Assembly with Bottled Water/City Water Function Assembly with 750 ml Bottle $ Assembly with Large Capacity Bottle $ For antiseptic coolant or water Easy to install with installation instructions L bracket mounts to any flat vertical surface. Order post mount kit for mounting to post On-off air supply toggle valve, with tubing Regulator, preset at factory Two position routing valve allowing use of bottled water/air purge or bottled water/city water Water pressure gauge Heavy Duty Plastic Bottle is not autoclavable IMPORTANT! AUXILIARY CLEAN WATER SUPPLY SYSTEMS ARE NOT RECOMMENDED FOR USE WITH WATER HEATERS UNIVERSAL POST MOUNT ASSEMBLY - SURF $57.30 Mounts vacuum canisters or & auxiliary clean water system , , & on a 2 dia. post (2) 6-32 threaded mounting holes Includes mounting screws Surf finish DUAL WATER BOTTLE SUPPLY SYSTEM Post Mount $ Wall Mount $ Under the Counter Mount $ If your doctor is asking for more water capacity, but the assistant has a hard time holding and threading a large bottle full of water onto the existing clean water system, this dual system will solve both of their needs. This clean water system utilizes two 750 ml heavy duty HDPE bottles that operate independently of each other with toggle control valves. One bottle may be pressurized and in service while the other bottle is removed for cleaning or refilling, with pressure gauge reading bottle in use. This system also provides plumbing to facilitate use of an air purge, with the selector toggle to switch from bottled water to air purge or vice versa. Asepsis Housing for easy cleaning Sterling color Includes mounting hardware, supply tubing and installation instructions IMPORTANT! AUXILIARY CLEAN WATER SUPPLY SYSTEMS ARE NOT RECOMMENDED FOR USE WITH WATER HEATERS HEAVY DUTY PLASTIC BOTTLE 750 ml Heavy Duty $10.90 Large Capacity Heavy $15.20 Duty Bottle (Approx. 2-Liter) For use with Auxiliary Clean Water Supply System Do not exceed 50 PSI air pressure High Density Polyethylene (HDPE) construction, translucent for checking fluid level Bottle material contains no latex Compatible with coolant liquids used in dentistry Heavy wall construction, safely operated at normal dental water system pressure Large capacity bottle includes pick-up tube This bottle is not autoclavable (small) 3 1/8 Dia. x 10 Tall (big) 4 1/8 Dia. x 14 Tall WATER BOTTLE PICK-UP TUBES 750 ml Bottle (Pkg. of 6) $7.50 Large Bottle (Pkg. of 6) $ ACCESSORIES & O-RINGS

36 WATER BOTTLE QUICK RELEASE $69.20 CONVERSION KIT Innovative design Quick and easy to use Pressure automatically released when changing bottle No tools need for installation Adapts to all CHAPMAN-HUFFMAN INC. water bottle systems Positive lock/release WATER BOTTLE QUICK RELEASE $26.30 MALE - LONG Replacement for male side (top) of Water Bottle Quick Release Conversion Kit Adapts to ADEC systems: PRE-CASCADE, CASCADE, PERFORMER Replacement O-Ring V-00 $5.80 Pkg. of 5 WATER BOTTLE QUICK RELEASE MALE $26.30 Replacement for male side (top) of Water Bottle Quick Release Conversion Kit Screws into water bottle system Replacement O-Ring V-00 $5.80 Pkg. of 5 WATER BOTTLE QUICK RELEASE FEMALE $59.90 QUICK RELEASE WATER BOTTLE PICK UP TUBES - LONG For use with Water Bottle Quick Release Conversion Kit - Long Green color 750 ml Bottle $7.20 Pkg. of 6 Large Bottle $7.20 Pkg. of 6 QUICK RELEASE WATER BOTTLE PICK UP TUBES Replacement for female side (bottom) of Water Bottle Quick Release Conversion Kit Screws onto water bottle Available for equipping additional water bottles For use with Water Bottle Quick Release Conversion Kit Blue color 750 ml Bottle $7.20 Pkg. of 6 Large Bottle $7.20 Pkg. of 6 PRESSURE HEAD ASSEMBLY WITH GAUGE $39.80 Includes 13 1/2 & 10 long water pick up tubes mounting holes are 1 apart Accepts bottles w/28mm ALCOA thread White plastic construction Includes Gasket Includes mounting screws NEW! PRESSURE HEAD ASSEMBLY WITHOUT GAUGE $27.50 ACCESSORIES & O-RINGS WATER BOTTLE QUICK RELEASE $69.20 CONVERSION KIT - LONG Innovative design Quick and easy to use Pressure automatically released when changing bottle No tools need for installation Positive lock/release Adapts to ADEC systems: PRE-CASCADE, CASCADE, PERFORMER Includes 13 1/2 & 10 long water pick up tubes mounting holes are 1 apart Accepts bottles w/28mm ALCOA thread White plastic construction Includes Gasket Includes mounting screws NEW! ACCESSORIES & O-RINGS 68 69

37 WASTE DROP 4 INCH $55.90 RIGHT ANGLE AIR CHUCK $7.10 This 4 diameter stainless steel waste drop fits through a 4 1/8 hole in the counter top. This is a nice transition piece between the counter top and waste basket below. The waste drop can be easily removed for cleaning. 4 1/4 tall. Stainless steel construction For pressurizing valve core type filler stems Brass construction 1/4 FPT AIR BLOWGUN $18.20 WASTE DROP 6 INCH $69.10 This 6 diameter stainless steel waste drop fits through a 6 1/8 hole in the counter top. This is a nice transition piece between the counter top and waste basket below. The waste drop can be easily removed for cleaning. 6 1/2 tall. Stainless steel construction Lever operated 1/4 FPT inlet 125 PSI working pressure Standard safety tip (venturi holes increase air volume & allow air to escape if nozzle is dead-ended) Maximum of 30 PSI outlet pressure Conforms to OSHA standards MASTER ON-OFF INDICATOR Red Indicator Black Bezel $16.50 Gray Bezel $16.50 Green Indicator Black Bezel $16.50 Gray Bezel $16.50 Shows color indicator when under pressure 1/16 barb connection Requires 1/2 hole for mounting AIR BLOWGUN WITH TUBING Blowgun w/ Coiled 10 Ft. Tubing Neon Green $45.80 Gray $45.80 Coiled 10 Ft. Tubing w/ Fittings Neon Green $37.50 Gray $37.50 Same features as Blowgun plus 10 ft. coiled hose with 1/4 MPT swivel fitting both ends ACCESSORIES & O-RINGS HANDPIECE OIL COLLECTOR AND $65.10 MUFFLER ASSEMBLY Oil collector and muffler assembly for one to three handpieces Compact size jar 1 3/8 diameter X 1 1/4 long Filter element is a common gauze found in the dental office Minimum back pressure Can mount through unit base plate so jar can be removed for cleaning & filter element replacement Installation instructions ADEC cross ref. # KAVO MULTIFLEX COUPLING TYPE O-RING KIT $15.50 NEW! Fits KAVO Multiflex Coupling Recommended to replace all (5) O-rings on coupler NEW KAVO cross ref. # All O-rings are black OLD KAVO cross ref. # (2) small O-rings were white (3) larger O-rings were black O-RING INSTALLATION TOOL KIT $33.00 FOR HANDPIECE COUPLERS Includes two separate O-ring tools to assist when installing O-rings on KAVO MULTIFLEX couplers Use with Chapman-Huffman O-ring Kit Stainless steel construction Fits Chapman-Huffman couplers: , , , , , and ACCESSORIES & O-RINGS 70 71

38 MIDWEST XGT/STYLUS TYPE 5-HOLE $14.70 COUPLER O-RING KIT Fits MIDWEST XGT/Stylus 5-hole coupler MIDWEST cross ref. # R Pkg. of 2 sets MIDWEST XGT/STYLUS TYPE 6-HOLE $14.70 COUPLER O-RING KIT Fits MIDWEST XGT/Stylus 6-hole coupler MIDWEST cross ref. # Pkg. of 2 sets BIEN-AIR TYPE ELECTRIC $7.60 HANDPIECE O-RING KIT BIEN AIR cross ref. # CAVITRON TYPE INSERT O-RING KIT $19.30 Fits CAVITRON Jet nozzle, Slimline, P Style, CAVITRON Med and Pel inserts Autoclavable Green color DENTSPLY cross ref. # Pkg. of 12 in resealable bag CAVITRON TYPE INSERT O-RING KIT $19.30 Fits FSI, FSI-SLI AND TFI inserts Autoclavable Black color DENTSPLY cross ref. # Pkg. of 12 NOTE: Vibration from dental handpiece turbines is absorbed by O-rings or quad rings. These O-rings and quad rings eventually breakdown, making the turbine sound like it has worn or defective bearings. By replacing these O-rings or quad rings, the turbine may sound normal again, this may also extend the life of the bearing. KAVO STYLE AIR OR ELECTRIC $13.30 MOTOR O-RING SWIVEL O-RING KIT $11.90 Fits STAR 430 SWL handpiece swivel Fits TITAN S/SW Sonic Scaler Swivels Autoclavable Green color Fits all two, three and four line swivels Package contains two large and two small O-rings STAR cross ref. old # new # Fits the following KAVO handpieces 181H Air Motor requires (3) 181L Air Motor requires (3) KL700 Electric Motor requires (4) KL701 Electric Motor requires (4) KL702 Lux Brushless Micromotor requires (4) KL703 Electric Motor requires (3) 196 Series Electric Motor requires (4) KAVO cross ref. # Pkg. of 1 HANDPIECE TURBINE REPLACEMENT O-RINGS MIDWEST Quiet-Air $5.00 STAR $7.50 KAVO $5.00 ATHENA/CHAMPION $5.00 For use in dental handpiece turbines Autoclavable Pkg. of 2 ACCESSORIES & O-RINGS NSK AND SCHEIN MASTER $12.60 Q.D. TYPE O-RING KIT Fits both NSK and SCHEIN master Q.D. handpiece swivel couplers ACCESSORIES & O-RINGS 72 73

39 HANDPIECE TURBINE REPLACEMENT QUAD RINGS $5.40 MIDWEST TRADITION For use in dental handpiece turbines Autoclavable Pkg. of 2 KAVO QUATTROCARE TYPE REPLACEMENT O-RINGS Small Green O-Ring $3.10 KAVO cross ref. # Large Green O-Ring $3.10 KAVO cross ref. # Black O-Ring $3.10 KAVO cross ref. # O-RING KIT $ NITRILE / BUNA N REPLACEMENT O-RINGS PACKAGED IN RESEALABLE BAGS FOR O-RING KIT ID OD WALL Pkg. Qty Price 1/32 3/32 1/ Q-00 $7.80 3/64 9/64 3/ Q-00 $7.80 1/16 11/64 1/ Q-00 $7.80 5/64 13/64 1/ Q-00 $5.80 3/32 7/32 1/ Q-00 $5.80 1/8 1/4 1/ Q-00 $5.80 5/32 9/32 1/ Q-00 $5.80 3/16 5/16 1/ Q-00 $5.80 7/32 11/32 1/ X-00 $5.80 1/4 3/8 1/ X-00 $5.80 5/16 7/16 1/ X-00 $5.80 3/8 1/2 1/ X-00 $5.80 7/16 9/16 1/ X-00 $5.80 1/2 5/8 1/ X-00 $5.80 9/16 11/16 1/ V-00 $5.80 5/8 3/4 1/ V-00 $ /16 13/16 1/ V-00 $5.80 3/4 7/8 1/ V-00 $ /16 15/16 1/ V-00 $5.80 7/8 1 1/ V-00 $ /16 1-3/16 1/ V-00 $ /8 1-1/4 1/ V-00 $5.80 1/4 5/16 1/ X-00 $12.90 ACCESSORIES & O-RINGS Consists of convenient 20 compartment tool box size case, more than 200 O-rings in 20 sizes from 3/32 OD to 1 OD O-rings packaged in resealable bags Use only Parker O-Ring Lube. Chapman-Huffman item sold on pg. 225 VITON REPLACEMENT O-RINGS X-00 $3.00 Heat resistance 121 C or 250 F 1/32 3/32 1/ X-00 $7.50 3/64 9/64 3/ X-00 $7.50 1/16 11/64 1/ X-00 $7.50 5/64 13/64 1/ X-00 $7.50 1/8 1/4 1/ X-00 $7.50 5/32 9/32 1/ X-00 $7.50 3/16 5/16 1/ X-00 $7.50 1/4 3/8 1/ X-00 $7.50 5/16 7/16 1/ X-00 $7.50 3/8 1/2 1/ X-00 $7.50 7/16 9/16 1/ X-00 $7.50 1/2 5/8 1/ X-00 $7.50 1/4 5/16 1/ X-00 $ durometer Brown color Heat resistance 205 C or 400 F Use only Parker Super O-Lube. Chapman-Huffman item sold on pg O-rings per package in resealable bag ACCESSORIES & O-RINGS 74 75

40 ACCESSORIES & O-RINGS 76 DCI CROSS REF. DCI and ADEC O-ring cross reference guide Note! The below part numbers are non-standard O-rings. Standard O-rings in BUNA-N, VITON and ETHYLENE (EP) can be found on pgs. 41 and below. ADEC CROSS REF. MATERIAL FRACTIONAL DIMENSION ID X CROSS SECTION ETHYLENE PROPYLENE (EP) REPLACEMENT O-RINGS PKG QTY PRICE BUNA-N 1/ X X-00 $ BUNA-N 3/ X X-00 $ VITON 3/ X X-00 $ BUNA-N 1/ X X-00 $ BUNA-N 5/ X X-00 $ BUNA-N 5/ X X-00 $ VITON 5/ X X-00 $ BUNA-N 3/ X X-00 $ VITON 1/8.129 X X-00 $ VITON 1/8.136 X X-00 $ BUNA-N 9/ X X-00 $ BUNA-N 3/ X X-00 $ BUNA-N 3/ X X-00 $ BUNA-N 3/ X X-00 $ BUNA-N 1/4.248 X X-00 $ VITON 1/4.250 X X-00 $ BUNA-N 17/ X X-00 $ VITON 19/ X X-00 $ VITON 7/ X X-00 $ BUNA-N 7/ X X-00 $ VITON 7/ X X-00 $ BUNA-N 15/ X X-00 $ BUNA-N 15/ X X-00 $ BUNA-N 1-55/ X X-00 $ BUNA-N 2-7/ X X-00 $7.70 (EP) Ethylene Propylene, Superior O-ring for water applications ADEC cross reference numbers listed below Heat resistance 121 C or 250 F Use only Parker Super O-Lube. Item sold on pg. 225 Autoclavable I.D. O.D. WALL ADEC Cross Ref. # Pkg. Qty X-00 $ X-00 $ Lavender X-01 $ X-00 $ X-00 $ N/A X-00 $ X-00 $ X-00 $ X-00 $ X-00 $ X-00 $ X-00 $ X-00 $ X-00 $ X-00 $ X-00 $ X-00 $ X-00 $6.20 ROUND GAUGE $ PSI 1 5/8 diameter face 1/8 MPT or port For air or water service ROUND GAUGE 0-15 PSI $ PSI (for low pressure use only) Larger gauge face graduations for easier reading at low pressures 1 5/8 diameter face 1/8 MPT back mount For air or water PANEL MOUNT GAUGE $ PSI 1 5/8 diameter face 1/8 MPT or port For air or water service GAUGE REPLACEMENT LENS $8.80 Fits Panel Mount Gauge Push in type Clear polyurethane construction RECTANGULAR GAUGE $ PSI scale Kg/cm² 1-4 scale 1/2 high X 1 3/4 wide Panel mount port For air service AIR COMPRESSOR MAIN GAUGE $33.30 Designed for reading main tank pressure on air compressors PSI range 1/4 MPT bottom mount 2 1/8 diameter face 77 ACCESSORIES & O-RINGS

41 VACUUM GAUGE $57.40 CASSETTE CARRIAGE CABLE ASSEMBLY $37.40 Fits wet type vacuum pumps Fits the following: AIR TECHNIQUES vacuum pumps, VACSTAR 2, 20, 4, 40; Single Pumps VACSTAR 50, 50H, 80, 80H dual pumps 1/8 MPT back mount 1 5/8 diameter face 0-30 inches of mercury AIR TECHNIQUES cross ref. # Fits S.S. White panorex cassette carriage Includes (3) cable assembly screws CASSETTE CARRIAGE CABLE SCREW $13.50 VACUUM GAUGE $34.10 Fits wet type vacuum pumps Commonly used on single pumps 1/4 MPT bottom mount 2 diameter face 0-30 inches of mercury Fits S.S. White Panorex cassette carriage cable Pkg. of 12 STORAGE RACKS WITH ORGANIZERS $ LIQUID FILLED VACUUM GAUGE $85.40 When your customer has a rough running wet type vacuum pump & the extra vibration keeps destroying vacuum gauges, this is the gauge you need. Liquid filled Commonly used for single wet type vacuum pumps 1/4 MPT bottom mount 2-3/4 diameter face 0-30 Inches of mercury Four storage tubs and racks with mounting brackets Designed for mounting to cart, cabinet or wall Perfect for custom mounting White plastic tubs with hinged lids Each tub comes with one vertical divider and one half-divider for depth adjustment Two position, horizontal and 30 tilt for convenient access Mounting surface is 6 1/2 X 21 ACCESSORIES & O-RINGS VACUUM GAUGE ASSEMBLY $66.10 Fits DENTAL-EZ MC-201 and MC-202 Dynamic- Dual evacuation System (some modification to mounting hole needed on older models) Cross ref. # Fits VACSTAR 5, 8; dual vacuum pumps 0-30 inches of mercury Panel mount 1/4 MPT back mount STORAGE TUB WITH DIVIDERS $38.90 Fits single rack ( ) Tub measures (outside) 5 1/4 L X 4 1/4 W X 5 3/4 H inside 4 3/4 deep Includes one half and one full divider White plastic tub, hinged cover and dividers ACCESSORIES & O-RINGS 78 79

42 SINGLE RACK $26.30 Fits storage tub ( ) and single rack mounting bracket ( ) Nonslip feet Color white 5 1/4 W X 6 1/2 D THREE PRONG PLUG $15.90 Hospital grade Fits cord diameter amp 125 volt Black and White Nylon ELECTRICAL COMPONENTS SINGLE RACK MOUNTING BRACKET $9.30 For mounting single rack ( ) to cart, cabinet or wall Color white THREE PRONG MALE ANGLE PLUG $22.40 Hospital grade Fits cord diameter amp 125 volt Transparent THREE PRONG FEMALE CONNECTOR $24.70 STORAGE TUB DIVIDERS Full (3 13/16 x 4 3/4) $7.10 Half (2 1/4 x 3 7/8) $5.00 Fits storage tub White plastic ILLUMINATOR AIR ELECTRIC SWITCH Hospital grade Fits cord diameter amp 125 volt Black and White nylon ACCESSORIES & O-RINGS STORAGE TUB COVER / TUB HINGE White Cover $15.40 Clear Cover $17.40 White Hinge Only $3.30 Fits storage tub Plastic construction Note: Order hinges ( ) separately Normally Open (Positive) $35.90 Normally Closed (Negative) $35.90 Heavy duty air electric switch for the repair of fiber optic light source controls , , and DIAPHRAGM SWITCH $ Fits PELTON & CRANE foot control valve block assembly PELTON & CRANE cross ref. # Switch O-Ring - Pkg. of Q-00 $5.80 PELTON & CRANE cross ref. #

43 ELECTRICAL COMPONENTS TERMINAL STRIP ASSEMBLY $ pole terminal strip accepts AWG wire with screw clamp connections Used for Chapman-Huffman handpiece Illumination System wire connections Includes mounting tape and mounting screw WIRE NUT $4.10 AIR ACTUATED ELECTRIC SWITCH ASSEMBLY Normally Open $26.90 Normally Closed $ V, 5 amp switch Requires 10 PSI for activation 1/16 barb fitting 18 AWG wire, 6 Mounting hardware 15/32-32 thread with nut ELECTRICAL COMPONENTS Fits AWG Gray Pkg of 15 AIR ACTUATED ELECTRIC SWITCH $57.40 Replacement Switch Only $35.90 LIGHT CONTROL SYSTEM TRANSFORMER $77.90 Replacement for KAVO transformer KAVO cross ref. # (Old #) (New) # Replacement also for CHAPMAN-HUFFMAN light control system Input = 120VAC Output = 830mA On/off control of 7.5A, normally open, or 15A 10 PSI operating actuation Barb fitting for 1/8 OD tubing 18 AWG wire, (6 ) Mounting hardware AIR ELECTRIC SWITCH N/O OR N/C $60.00 LAMP HOLDER SOCKET ASSEMBLY $19.60 LOW VOLTAGE Fits MDT Rolux light and others 24 volt - low voltage rated 60 volt max MDT cross ref. # Also fits other low voltage applications Socket is designed to the ANSI codes and international standards Lamp holders are UL and CSA approved LAMP HOLDER SOCKET ASSEMBLY $21.50 HIGH VOLTAGE Fits Chapman-Huffman Light Source , , and Also fits MIDWEST Insight Light Source 120 volt - high voltage rated 300 volt max Also fits other high voltage applications Socket is designed to the ANSI codes and international standards Lamp holders are UL and CSA approved NEW! 40 PSI activation VAC Fits A-DEC master control - dental light Fits A-DEC power supplies 25W, 150W, and 300W ADEC cross ref. # UNIVERSAL X-RAY EXPOSURE SWITCH $ COIL CORD ASSEMBLY Comfortable and compact handle design Attractive black finish to compliment room decor Compatible with most modern x-ray machines (with low voltage switching only up to 50V) Not for use with mechanical timers. Modular construction for ease of installation Assembly includes: Push button exposure switch assembly with 25 ft. coil cord, Quick Disconnect Terminal Assembly, all necessary hardware and installation instructions Not for high voltage 82 83

44 ELECTRICAL COMPONENTS UNIVERSAL X-RAY EXPOSURE SWITCH $10.10 Push button type Off-Mom. (on) Single pole, single throw Normally Open 3/4 amp, 125 volts AC/DC 1/4 amp, 250 volts AC/DC Screw terminals MAIN ON/OFF POWER SWITCH $19.20 Fits GENDEX 765DC X-Ray Control On/Off Rocker Switch with solder pins GENDEX cross ref. # P2 POWER ON/OFF SWITCH $31.20 ELECTRICAL COMPONENTS UNIVERSAL COVER PLATE $9.40 Ideal for mounting universal x-ray exposure switch Brushed stainless steel Fits single duplex box 1/2 diameter center hole Universal hole grommet with 3/8 ID X-Ray sticker Mounting hardware Fits Control Panel ORTHORALIX 9000 Panoramic x-ray VAC, DPST On/Off Panel mount, black body 1/4 quick connect tabs GENDEX cross ref. # P1 MAIN ON/OFF SWITCH $24.50 REMOTE EXPOSURE SWITCH $ Fits GENDEX GX770 Lighted on/off rocker switch GENDEX cross ref. # IPI For all GENDEX Intraoral X-Ray Systems GENDEX cross ref. #A8108AA POWER SWITCH CABLE ASSEMBLY $39.50 Fits GENDEX EXPERT DC GENDEX cross ref. # G1 PUSH BUTTON SWITCH $ Fits: GENDEX-770 GENDEX-900 or GE-900 GENDEX-1000 or GE-1000 master control 765 DC and Expert DC GENDEX-Pan small control PANELIPSE master control PANELIPSE II master control GENDEX cross ref. # P1 X-RAY EXPOSURE SWITCH $55.30 Fits WEBER ULTRON-90 X-Ray control Also fits RITTER G Coilcord Handle MINIATURE TOGGLE SWITCH $9.50 Single pole, double throw Rated: 120 VAC 250 VAC Fits 1/4 (6.4mm) hole Fits panels up to 11/64 (4.3mm) thick DCI cross ref. #

45 ELECTRICAL COMPONENTS CONTROL PANEL VACUUM SWITCH $36.00 Fits AIR TECHNIQUES 24 Volt White Rocker/Amber Light AIR TECHNIQUES cross ref. # Terminals #1 Light, #2 Power, #3 Load WATER SOLENOID VALVE ASSEMBLY $ Fits DENTSPLY MVS Vacuum Pump (2) 1/8 FPT volt 1/8 Orifice Cross ref. # Part # ELECTRICAL COMPONENTS GENERAL PURPOSE WATER SOLENOID $ PERI-PRO TYPE POWER SWITCH $22.80 Fits PERI-PRO I Amber Rocker Fits serial number and above AIR TECHNIQUES cross ref. # Water solenoid 120 volt 2-way normally closed Brass body (2) 1/8 FPT ports 3/32 Orifice 24 lead wires PERI-PRO TYPE POWER SWITCH ON LIGHT $22.80 Fits PERI-PRO III Amber Rocker AIR TECHNIQUES cross ref. # AIR SOLENOID VALVE ASSEMBLY $ Fits BELMONT Power Wall Master Control (2) 1/8 FPT ports Top port, with unthreaded exhaust (2) 8-32 mounting holes 3/64 Orifice 120 volt, NC, 3-way Cross ref. # PW78168 PERI-PRO II AND III TYPE READY LIGHT SWITCH $22.80 Fits PERI-PRO II and III Green Rocker AIR TECHNIQUES cross ref. # (New # 94977) (Old # 94277) WATER SOLENOID VALVE ASSEMBLY $ Commonly used on water injected vacuum pumps 24 volt 60 Hz, 2 way NC (2) 1/8 FPT ports Stainless steel body 7/64 Orifice DENTAL-EZ cross ref. # Also used for other water service applications IR SOLENOID VALVE ASSEMBLY $ Fits AIR-TECHNIQUES DENTO-DRI # 3100R (2) 1/8 FPT ports 120 volt 1/16 Orifice AIR-TECHNIQUES cross ref. # 3189 WATER SOLENOID VALVE ASSEMBLY $ Commonly used on water injected vacuum pumps 120 volt 60 Hz, 2 way NC (2) 1/8 FPT ports Stainless steel body 7/64 Orifice DENTAL-EZ cross ref. # Also used for other water service applications 86 87

46 ELECTRICAL COMPONENTS WATER SOLENOID VALVE ASSEMBLY $ Commonly used on water injected vacuum pumps 240 volt 60 Hz, 2 way NC (2) 1/8 FPT ports Stainless steel body 7/64 Orifice DENTAL-EZ cross ref. # Also used for other water service applications WATER SOLENOID VALVE ASSEMBLY $ W/ THREE PRONG PLUG Main water solenoid for PHILIPS / DENT-X X-Ray film processor Exact replacement for Dent-X cross ref. # with three prong plug for adapting to older BLUE TIME TEMPERATURE Control Box 1/4 FPT Ports 3/32 Orifice WATER SOLENOID VALVE ASSEMBLY $ W/ MOLEX CONNECTOR Main water solenoid for DENT-X X-Ray film processor 810 Basic and 9000 Exact replacement for Dent-X cross ref. # with MOLEX three pin connector 1/4 FPT Ports 3/32 Orifice AIR FILTER $45.00 Fits PELTON & CRANE Hustler I & II Cross ref. # C Rated at 10 CFM AIR INTAKE REPLACEMENT FILTER $52.40 Replacement for AIR TECHNIQUES AIRSTAR air compressors AIR TECHNIQUES cross ref. # micron filtration Filter housing constructed of black plastic and stainless steel Includes silicone O-ring and threaded elbow Fits the following compressors AIRSTAR 1, 10 and 10C - (1) required AIRSTAR 2-1, 2-2, 21, 21C, 22, 22C, 3, 30 and 30C - (2) required AIRSTAR 5, 50 and 50C - (4) required AIRSTAR 7 and 70 - (6) required NOTE: AIR TECHNIQUES recommends changing filters once a year, or more often in dusty enviornments AIR INTAKE REPLACEMENT FILTER $56.60 COMPRESSOR PARTS 5-POSITION ELECTRICAL CONNECTOR $44.70 Fits MIDMARK Classic Series air compressors MIDMARK / MATRX cross ref. # Fits KAVO KL700 ELECTROTORQUE PLUS Tubing FERRITE BEAD $3.40 Suppression filter used to reduce electrical noise Used on KAVO KL700 ELECTROTORQUE PLUS AIR COMPRESSOR SUPPLY HOSE ASSEMBLY 3 Ft. Hose Assembly $ Ft. Hose Assembly $ IMPULSE HEAT SEALER ELEMENT KIT $29.40 Fits LORVIC/YOUNG type 8 table top impulse heat sealer Above impulse heat sealer is used for sealing nyclave tubing and plastic bags Fits TEW 200 and other 8 Impulse heat sealers Kit includes Heating Element wire, 1/2 TEFLON Insulator tape with adhesive & TEFLON element cover For new and existing compressor installation between air compressor and building air supply line Flexible 1/2 ID, 250 PSI blue high pressure air hose 1/2 MPT brass swivel couplings both ends 89

47 AIR COMPRESSOR TANK DRAIN 120 Volt Model $ Volt Model $ INLINE WATER REMOVAL FILTER ASSEMBLY 1/4 FPT $ /8 FPT $ COMPRESSOR PARTS UNLOADER PURGE SOLENOID ASSEMBLY Drains moisture buildup in air compressor tank Fully automatic Adjustable drain open time from 1 sec. to 500 sec. Purges every time compressor cycles Unit is off when compressor is off Valve will not foul with oil like other drain systems Electrical source from pressure switch Includes service valve, screen and installation kit All metal construction Used on dental compressors w/ cycles of PSI Do not use these assemblies with air compressors using synthetic oil Use with all air compressors not using synthetic oil /4 FPT fits PELTON & CRANE Deaquavator Up to 48 CFM capacity Automatic drain Inline or bracket mounting 2 7/16 diameter X 6 1/2 long NOTE! is recommended for use upstream from Inline Oil Removal Filter Assembly BOWL REPLACEMENT KIT $60.60 Do not use this bowl with air compressors using synthetic oil Fits and inline water removal filter assembly Contains clear plastic bowl (without auto drain), bowl O-ring and metal bowl guard only COMPRESSOR PARTS COOLING FAN Fits drying chamber on AIR TECHNIQUES compressor 208/230 VAC Normally open 24 cross ref. # $ Fits AS50, AS50C 19 cross ref. # $ Fits AS22, AS22C, AS30X, AS30C 115 Volt $ Volt $70.20 Manufacturer Cross Ref # Cross ref# For 115 Volt For 230 Volt AIR TECHNIQUES APOLLO SEA95535 SEA95540 DENTAL-EZ JUN AIR (Fan Only) JA JA MDT KCKESSON TECHWEST / TURBINE (Fan Only) CF-115 CF-230 Ball Bearing Construction Comes with mounting screws, not shown NOTE! Replacing float drain assembly when using this kit is recommended INLINE OIL REMOVAL FILTER ASSEMBLY $ May be used with air compressors using synthetic or petroleum based oil Automatic drain 20 CFM capacity 3/8 FPT ports Inline or bracket mounting 2 1/2 diameter X 7 long NOTE! Recommended for use with Install downstream from FILTER ELEMENT $47.20 Fits Inline Oil Removal Filter Assembly 9 micron coalescing element 90 91

48 COMPRESSOR PARTS INLINE WATER REMOVAL FILTER $ ASSEMBLY WITH METAL BOWL May be used with air compressors using synthetic or petroleum based oil Metal bowl For use with all dental air compressors Up to 48 CFM capacity Automatic drain Inline or bracket mounting 2 7/16 diameter X 6 1/2 long 3/8 FPT ports NOTE! is recommended for use upstream from Inline Oil Removal Filter Assembly when synthetic oils are used METAL BOWL REPLACEMENT KIT $89.60 May be used with air compressors using synthetic oil or petroleum based oil Black metal bowl (without auto drain) with bowl O-ring Fits , also fits , , and FILTER ELEMENT $17.70 Fits , and Inline Water Removal Filter Assembly 40 micron sintered bronze construction FLOAT DRAIN ASSEMBLY $70.10 Fits Inline Oil Removal Filter and , and Inline Water Removal Filter Assembly Automatically drains above assembly s filter bowls, when they become full Installation kit with instructions O-RING KIT $2.60 Fits , , and filter assemblies when replacing bowl and baffle O-rings COMPRESSOR PARTS NOTE! Purchase and intallation of Float Drain Assembly is recommended when using this kit AUTOMATIC DRAIN VALVE $77.60 O-Ring For Bowl $1.30 MOUNTING BRACKET KIT $22.20 Mounts , , and to a vertical surface Nickel plated steel construction Mounting hardware Fits Chapman-Huffman obsolete part and fits PELTON & CRANE DEAQUAVATOR refrigerated air dryer original air filter assembly with auto drain 1/4 FPT ports Norgren 5 OZ. COALESCING AIR FILTER ASSEMBLY $ CONNECTOR INSERT KIT $36.00 Connects Inline Oil Removal Filter Assembly to , or Inline Water Removal Filter Assemblies Aluminum construction painted black finish Installation instructions Fits APOLLO DENTAL air compressor and others Also fits MATRX cross ref. # With red/green warning indicator With automatic float drain 3 Dia. X 8 long APOLLO cross ref. # ACA70305 (For single head compressors) (2) 3/8 FPT ports Includes: /8 ID Push-on X 1/8 MPT Straight fitting Wilkerson 92 93

49 5 OZ. COALESCING FILTER ELEMENT $ RED/GREEN WARNING INDICATOR $47.60 Coalescing air filter with bowl O-ring and seal Fits assembly.01 micron APOLLO cross ref. # PFM85230 (For single head compressors) MATRX cross ref. # Wilkerson Fits and oz. and 10 oz. coalescing air filter assemblies With mounting screws and O-ring seals APOLLO DENTAL cross ref. # AAP85210 Wilkerson COMPRESSOR PARTS 10 OZ. COALESCING AIR FILTER ASSEMBLY $ Fits APOLLO DENTAL air compressor and others With red/green warning indicator APOLLO DENTAL cross ref. # ACA85215 (For twin and triple head compressors) 3 1/2 Dia. X 8 long (2) 3/8 FPT ports Includes: /8 ID Push-on X 1/8 MPT straight fitting Wilkerson INDICATOR BLANKING KIT $22.00 With this kit you can remove the red/green warning indicator from either or coalescing air filter assemblies and replace with Indicator Blanking Kit Handy to carry for temporary repairs APOLLO DENTAL cross ref. # AAP85215 Wilkerson COMPRESSOR PARTS 10 OZ. COALESCING FILTER ELEMENT $ SMALLER RED/GREEN WARNING INDICATOR $45.00 Coalescing air filter with bowl O-ring and seal Fits assembly.01 micron APOLLO cross ref. # PFM85210 (For twin and triple head compressors) Wilkerson AUTO FLOAT DRAIN (PLASTIC CONNECTION) $ Fits and oz. and 10 oz. coalescing air filter assemblies APOLLO DENTAL new cross ref. # ACA85210 old cross ref. # PFM85980 Includes: /8 ID Push-on X 1/8 MPT straight fitting Wilkerson BOWL O-RING $10.10 Fits and oz. and 10 oz. coalescing air filter assemblies APOLLO DENTAL cross ref. # MRP85220 Fits AIR TECHNIQUES Oil-Free Compressor with Wilkerson Coalescing Filter Assembly Mounting holes center to center on this Indicator are 1 1/4 apart Slightly shorter in length than Red/Green Warning Indicator AIR TECHNIQUES cross ref # Also fits TECH WEST Oil-Less Single, Dual or Triple Head Compressors. (Using WILKERSON coalescing filter assembly.) AUTO FLOAT DRAIN (BRASS CONNECTION) $ Fits older APOLLO DENTAL / Wilkerson metal bowl with female 1/8 pipe threads Brass connection Fits older assemblies APOLLO DENTAL cross ref. # ACA85211 (Old cross ref. # PFM85975) Wilkerson Fits DENTAL-EZ compressor # CA

50 FILTER ELEMENT $26.50 FILTER ELEMENT $32.40 Fits MATRX Refrigerant air dryers PD-5, PD-10, PD-15, PD-25 and PD-35 with AF-1 Filters Air filter MATRX cross ref. # Wilkerson Fits Air Filter Assembly With Auto Drain 5 micron filtration COMPRESSOR PARTS DRIP LEG AUTOMATIC DRAIN $ Automatic float drain valve only $77.60 Used in compressed air systems to automatically expel liquids from the piping network. It should be installed at the low point in the piping and at the far end of the distribution system where water is likely to accumulate. 1/2 FPT port (Input) Norgren BOWL WITH AUTOMATIC DRAIN $ VALVE ASSEMBLY Do not use this assembly with air compressors using synthetic oil Fits air filter assembly with auto drain COMPRESSOR PARTS CLEAR BOWL WITH AUTOMATIC DRAIN $ OIL / WATER COALESCING FILTER ELEMENT $ Fits Drip Leg Automatic Drain Includes bowl, O-ring and automatic drain Norgren Coalescing filter Fits DENTAL-EZ / JUN-AIR compressors, CA711, CA713, CA721, CA723, CA725 DENTAL-EZ cross ref. # (Old # ) (New # ) JA Fits DENTAL-EZ AIR FILTER ASSEMBLY WITH AUTO DRAIN $ Do not use this assembly with air compressors using synthetic oil Fits PELTON & CRANE DEAQUAVATOR air dryer 1/4 FPT ports Inline mounting Auto drain 6 7/8 long X 2 3/8 X 2 5/8 diameter 150 PSI Max inlet pressure 49 90PSI 5 micron filtration PELTON & CRANE cross ref. # Norgren CARBON FILTER $ Fits DENTAL-EZ / JUN-AIR compressors, CA711, CA713, CA721, CA723, CA725 DENTAL-EZ cross ref. # (Old # ) JA (New # ) JA

51 AIR FILTER ASSEMBLY $ AUTO DRAIN AIR FILTER $68.50 COMPRESSOR PARTS Fits AIR TECHNIQUES Airstar Air Compressors With Red/Green warning indicator Manual drain (2) 1/2 FPT ports 2 3/4 diameter x 8 1/2 long AIR TECHNIQUES cross ref. # Norgren FILTER ELEMENT, 5 MICRON $30.40 Fits Air Filter Assembly micron Norgren Filter Element Only $16.50 O-Ring Pkg. of V-00 $5.80 (2) 1/8 female pipe ports 5 micron filtration Automatic moisture drain, which operates when a rapid change in flow through filter assembly occurs Arrow on side of filter body shows direction air flows through valve Fits PROPHY-JET 4 1/8 high X 1 1/4 dia. Use mounting bracket or below Norgren UNIVERSAL FILTER BRACKET $12.60 For mounting auto drain filter assembly with (2) /8 MPT X 1/4 poly fittings and other filters with similar size and fittings DENTSPLY cross ref. # Clear Chromate finish COMPRESSOR PARTS AIR FILTER BOWL ASSEMBLY $97.80 AUTO DRAIN AIR FILTER BOWL ASSEMBLY $72.00 Fits Air Filter Assembly Clear plastic construction with manual drain and O-ring Norgren O-Ring Pkg. of V-00 $5.80 Fits auto drain air filter assembly Replacement clear bowl with automatic moisture drain stem Norgren FILTER REGULATOR METAL BOWL ASSEMBLY $38.30 RED/GREEN INDICATOR $ Fits Air Filter Assembly With mounting screws Fits auto drain air filter assembly Replacement metal bowl with automatic moisture drain stem and O-ring May be used with air compressors using synthetic oil Metal bowl with automatic drain Norgren FILTER MOUNTING BRACKET $10.00 For mounting Auto Drain Air Filter Assembly and Miniature Coalescing Air Filter Assembly to any flat vertical surface Includes mounting screws 98 99

52 CHEMICLAVE REPLACEMENT DOOR GASKET $10.40 DOOR GASKET $85.30 CROSS SECTION VIEW ( ) CROSS SECTION VIEW ( ) Fits HARVEY MDT 4000, 5000, E & Aquaclave 10 MDT cross ref. # $22.60 Fits MDT Chemiclave 5500, EM5500, 7000 and Aquaclave 20 MDT cross ref. # CROSS SECTION VIEW Fits ADEC and W&H LISA MB17 Sterilizer Black silicone ADEC cross ref. # DOOR GASKET - OCM/GN $53.00 DOOR GASKET $59.40 CROSS SECTION VIEW Fits TUTTNAUER Autoclave model # 1730 TUTTNAUER cross ref. # Manufactured by Chapman-Huffman to fit TUTTNAUER Autoclave CROSS SECTION VIEW Fits PELTON & CRANE OCM Sterilizer PELTON & CRANE cross ref. # DOOR GASKET $64.20 CROSS SECTION VIEW Fits TUTTNAUER Autoclave model # 2340 units with serial # 8806 and higher TUTTNAUER cross ref. # Manufactured by Chapman-Huffman to fit TUTTNAUER Autoclave DOOR GASKET - OCR/OCR $59.30 CROSS SECTION VIEW Fits PELTON & CRANE OCR Sterilizer PELTON & CRANE cross ref. # STERILIZER PARTS DOOR GASKET $67.20 CROSS SECTION VIEW Fits TUTTNAUER Autoclave model # 2540 TUTTNAUER cross ref. # Manufactured by Chapman-Huffman to fit CROSS SECTION TUTTNAUER Autoclave VIEW CHEMICLAVE / AQUACLAVE $32.20 REPLACEMENT DOOR GASKET Fits HARVEY/MDT Chemiclave 6000, 8000 and Aquaclave 30 Cross ref. # CASSETTE SEAL KIT - STATIM $76.60 CROSS SECTION VIEW CROSS SECTION VIEW Fits SCICAN STATIM 2000 Cassette autoclave Kit includes installation instructions and bottle of lube SCICAN cross ref. # S CASSETTE SEAL KIT - STATIM $81.80 Fits SCICAN STATIM 5000 Cassette autoclave Kit includes installation instructions and bottle of lube SCICAN cross ref. # S STERILIZER PARTS DOOR GASKET / $87.00 CROSS SECTION VIEW Fits TUTTNAUER Autoclave models #3850 and #3870 units TUTTNAUER cross ref. # Manufactured for Chapman-Huffman to fit TUTTNAUER Autoclave DOOR GASKET - M $30.40 CROSS SECTION VIEW Fits MIDMARK M7 Autoclave MIDMARK cross ref. #

53 DOOR GASKET - M $68.60 CHECK VALVE KIT $50.00 CROSS SECTION VIEW Fits MIDMARK M9 Autoclave MIDMARK cross ref. # Fits SCICAN STATIM 2000 & /8 NFT thread Includes barb fitting tubing & tie straps Cross ref. # S, # S, # DOOR DAM - M $38.20 Fits MIDMARK M9 Autoclave MIDMARK cross ref. # For door w/ metal flap EXHAUST TUBING KIT $39.90 Includes 8 ft. nylon tubing and (5) adhesive-backed NEW! cable clamps Fits STATIM sterilizers: 2000, 5000, 900, G42000, G45000 SCICAN cross ref. # DOOR DAM - M $38.20 NEW! Fits MIDMARK M9 sterilizer For door WITHOUT metal flap MIDMARK cross ref. # POWER ON/OFF SWITCH $10.00 DOOR GASKET - M $71.90 Fits SCICAN STATIM 2000 & 5000 SCICAN Cross ref. # Fits MIDMARK M11 Autoclave MIDMARK cross ref. # STERILIZER PARTS CROSS SECTION VIEW DOOR DAM - M $36.90 Fits MIDMARK M11 Autoclave MIDMARK cross ref. # BULKHEAD UNION FITTING $41.90 FOR STATIM WASTE BOTTLE 1/4 poly x 1/4 copper compression With brass sleeve on 1/4 poly end Support washers included STERILIZER PARTS STATIM 2000 TYPE COMPRESSOR $ VAC 50/60 Hz 0.28A 2.84 psig Statim 2000 cross ref. # S Also fits PELTON & CRANE Delta 8 & Delta 10 Autoclave Replace check valve, Chapman-Huffman, Inc. part no at same time as replacing compressor PRESSURE RELIEF VALVE NEW! TUTTNAUER # $40.00 (37 PSI RELIEF) TUTTNAUER # $40.00 (40 PSI RELIEF) 1/4 MPT threads Fits TUTTNAUER autoclaves

54 FOOTSWITCH AND CABLE ASSEMBLY - 4 PIN $ FOOTSWITCH AND CABLE ASSEMBLY $ A footswitch assembly heavy enough to stay where you put it, no chasing it around with your foot. Same light foot pressure to operate as original equipment switch Round 4 pin male plug as illustrated, with 8-1/2 cable Two position switch Fits DENTSPLY PROPHY-JET 122 DENTSPLY cross ref. # A footswitch assembly heavy enough to stay where you put it, no chasing it around with your foot. Same light foot pressure to operate as original equipment switches Square 4 pin male plug as illustrated, with 8 1/2 foot cable Two position switch Fits a variety of DENTSPLY products DENTSPLY cross ref. # FOOTSWITCH AND CABLE ASSEMBLY - SPS TYPE $ A footswitch assembly heavy enough to stay where you put it, no chasing it around with your foot. Same light foot pressure to operate as original equipment switch Round 4 pin male plug as illustrated with 8-1/2 cable Two position switch Fits DENTSPLY CAVITRON SPS or CAVI-JET with SPS Technology DENTSPLY cross ref. # SCALER PARTS FOOTSWITCH AND CABLE ASSEMBLY - 3 PIN $ A footswitch assembly heavy enough to stay where you put it, no chasing it around with your foot. Same light foot pressure to operate as original equipment switches Rectangular 3 pin male plug as illustrated, with 8 1/2 foot cable Single position switch Fits DENTSPLY products DENTSPLY cross ref. # FOOTSWITCH AND CABLE ASSEMBLY $ BOBCAT TYPE A footswitch assembly heavy enough to stay where you put it, no chasing it around with your foot. Same light foot pressure to operate as original equipment switch Round 3 pin male plug as illustrated, with 8 1/2 foot cable Single position switch Fits DENTSPLY BOBCAT DENTSPLY cross ref. # FOOTSWITCH AND CABLE ASSEMBLY $ BOBCAT PRO TYPE A footswitch assembly heavy enough to stay where you put it, no chasing it around with your foot. Same light foot pressure to operate as original equipment switch Three wire as illustrated, with 8 1/2 foot cable Single position switch Fits DENTSPLY BOBCAT PRO DENTSPLY cross ref. # FOOTSWITCH AND CABLE ASSEMBLY $ CAVITRON SELECT STYLE A footswitch assembly heavy enough to stay where you put it, no chasing it around with your foot. Same light foot pressure to operate as original equipment switch Fits DENTSPLY CAVITRON SELECT Single position Round 1 pin male plug as illustrated, with 8 long cable DENTSPLY cross ref. # FOOT CONTROL ASSEMBLY $ CAVITRON SELECT SPS TYPE A footswitch assembly heavy enough to stay where you put it, no chasing it around with your foot. Same light foot pressure to operate as original equipment switch Round pin male plug as illustrated with 8 cable Two position switch Fits DENTSPLY CAVITRON Select SPS DENTSPLY cross ref. # FOOT CONTROL ASSEMBLY $ CAVITRON SELECT SPS BOOST TYPE A footswitch assembly heavy enough to stay where you put it, no chasing it around with your foot. Same light foot pressure to operate as original equipment switch Round pin male plug as illustrated with 8 cable Two position switch Fits DENTSPLY CAVITRON SELECT SPS BOOST DENTSPLY cross ref. # SCALER PARTS

55 SCALER PARTS 106 REPLACEMENT WATER FILTER $39.90 NEW! Luer-lock connections 40 PSI max. pressure 20 micron filtration Typically used on water input line of DENTSPLY ultrasonic scalers Replace filter monthly or sooner if discolored DENTSPLY cross ref. # Pkg. of 10 RETRO-FIT KIT FOR BURKERT $ REGULATOR/SOLENOID COMBO Replaces BURKERT regulator/solenoid combination found in certain DENTSPLY scalers 12VDC, 3W 2-Way N/C Non-relieving NEW! WATER SOLENOID VALVE ASSEMBLY $ DENTSPLY type water solenoid assembly Fits CAVI-JET 30, CAVITRON 2002, BOBCAT, CAVITRON 3000, CAVI-ENDO, CAVI-MED 24 volt AC (2) 1/8 FPT Ports 3/32 Orifice Cross ref. # / # DENTSPLY cross ref. # is (1) (1) Barbed Elbow and (1) /4 Poly x 1/8 MPT Fitting WATER SOLENOID ASSEMBLY $ Fits DENTSPLY Bobcat Pro 24 Volt (2) 1/8 FPT Ports 3/32 Orifice Includes fittings DENTSPLY cross ref. # AIR SOLENOID VALVE ASSEMBLY $ DENTSPLY air type solenoid assembly which fits CAVI-JET, CAVI-JET 30 (main air solenoid), and PROPHY-JET C volt (2) 1/8 FPT Ports 1/16 Orifice Cross ref. # (Old # 60449) (New # 63771) CHECK VALVE/FILTER ASSEMBLY $95.60 Fits DENTSPLY PROPHY-JET,PROPHY-JET 30, also C-300 CAVI-JET, CAVI-JET 30 CAVI-ENDO and CAVI-ENDO 25 CAVI-MED 200 DENTSPLY cross ref. # (Old #) (New #) FILTER ELEMENT $ micron, Dentsply cross ref. # DUCKBILL CHECK VALVE $34.90 Checks flow direction, Dentsply cross ref. # Both Filter Element and Duckbill Check Valve Fit Check Valve/Filter Assemblies Chapman-Huffman and DENTSPLY cross ref. # (Old #) (New #) AIR SOLENOID VALVE ASSEMBLY $ Fits DENTSPLY CAVI-JET 30, CAVI-ENDO 25 and PROPHY-JET 30 (2) 1/8 FPT body ports and (1) female threaded top port 3/64 Orifice 24 volt Normally open Cross ref. # / # SPS STYLE WATER SOLENOID ASSEMBLY $ Fits DENTSPLY CAVITRON SPS ultrasonic scaler with SPS technology and CAVITRON JET with SPS technology Fits CAVITRON Model G119, G120 SPS Style water solenoid 24 Volt DC (2) 1/8 FPT Ports 1/16 Orifice Stainless Steel body DENTSPLY cross ref. # Also replacement for # , G122 except connector is different 107 SCALER PARTS

56 SCALER PARTS BARBED ELBOW $6.10 Commonly used on DENTSPLY CAVITRON solenoid valves 1/6 barb X 1/8 MPT Brass construction DENTSPLY cross ref. # BARBED Y FITTING $7.30 Used in DENTSPLY products for air into solenoids DENTSPLY cross ref. # CAVITRON HANDPIECE SLEEVE ASSEMBLY $11.60 Using this sleeve on a CAVITRON handpiece will allow it to hang in universal holders or and others DENTSPLY TYPE WATER PRESSURE $65.60 REGULATOR Fits the following units CAVITRON 2002 CAVITRON 3000 PROPHY-JET 30 CAVI-JET 30 CAVI-ENDO 25 CAVI-MED DENTSPLY cross ref. # WATER PRESSURE REGULATOR WITH $80.00 EXTENDED ADJUSTMENT STEM Fits DENTSPLY products with this configuration Also fits CAVITRON JET-30 DENTSPLY cross ref. # SPS TYPE WATER REGULATOR $ Fits CAVITRON JET with SPS Technology and CAVITRON SPS Ultrasonic scaler with SPS Technology DENTSPLY cross ref. # (old) DENTSPLY cross ref. # (new) CAVITRON STYLE QUICK DISCONNECT $12.30 BRACKET For mounting CAVITRON Quick disconnects (1) 1/2 diameter hole and (1) 11/16 diameter hole, which will allow the installation of (1) and (1) Quick Disconnects. Clear anodized finish AUTO DRAIN AIR FILTER $68.50 Filter Element Only $16.50 O-Ring Pkg. of V-00 $5.80 (2) 1/8 female pipe ports 5 micron filtration Automatic moisture drain, which operates when a rapid change in flow through filter assembly occurs Arrow on side of filter body shows direction air flows through valve Fits PROPHY-JET 4 1/8 high X 1 1/4 dia. Use mounting bracket or below Norgren UNIVERSAL FILTER BRACKET $12.60 For mounting auto drain filter assembly with (2) /8 MPT X 1/4 poly fittings and other filters with similar size and fittings DENTSPLY cross ref. # Clear Chromate finish AUTO DRAIN AIR FILTER BOWL ASSEMBLY $72.00 O-Ring Pkg. of V-00 $5.80 Fits auto drain air filter assembly Replacement clear bowl with automatic moisture drain stem Norgren FILTER REGULATOR METAL BOWL ASSEMBLY $38.30 Fits auto drain air filter assembly Replacement metal bowl with automatic moisture drain stem and O-ring May be used with air compressors using synthetic oil Metal bowl with automatic drain Norgren 109 SCALER PARTS

57 FILTER MOUNTING BRACKET $10.00 For mounting Auto Drain Air Filter Assembly and Miniature Coalescing Air Filter Assembly to any flat vertical surface Includes mounting screws PROPHYLAXIS UNIT REPLACEMENT TUBING Black 7 Ft $49.40 Black 10 Ft $49.40 Gray 7 Ft $49.40 Fits DENTSPLY/CAVITRON/ PROPHY-JET model C-100 and C-200 Color coded (1) air and (1) water tube Both tube ID s are identical in size PROPHYLAXIS UNIT REPLACEMENT TUBING Black 7 Ft $44.70 Black 10 Ft $62.20 Gray 7 Ft $44.70 Fits PROPHY-JET 30 Fits DENTSPLY/CAVITRON PROPHY-JET model C-300 (cross ref. # 60489) & CAVI-JET models G104, G105 Color coded (1) air and (1) water tube Water tube ID is smaller than air tube ID CAVITRON STYLE REPLACEMENT TUBING ASSEMBLY Black 7 Ft $40.00 Exact replacement for tubing assembly only as pictured. Used on DENTSPLY 3000 handpiece & tubing assembly # Fits BOBCAT cross ref. # Fits CAVI-ENDO 25, CAVITRON 660, 1010 & 2002 (1) water tube (3) color coded 24 Ga. low voltage wires - white, red, green ULTRASONIC SCALER REPLACEMENT TUBING Black 7 Ft $32.50 Black 15 Ft $65.20 Gray 7 Ft $32.50 Gray 15 Ft $65.20 Fits either 2 or 3 wire applications (3) color coded 24 AWG low voltage wires - white, red, black (1) water tube 7 or 15 ft. length COILED ULTRASONIC SCALER REPLACEMENT TUBING Gray $45.50 Fits either 2 or 3 wire applications (3) color coded 24 AWG low voltage wires - red, white, black (1) water tube 7 ft. length Gray jacket INLINE QUICK DISCONNECT $15.10 Commonly used on PROPHY-JET installations so air and water lines can never cross 1/16 barb X female Inline type quick disconnect Can be panel mounted Included (2) 5/8 dia. stainless steel washers for mounting through oversized holes Brass construction Conventional valve core shut-off SCALER PARTS HANDPIECE CABLE ASSEMBLY Black Jacket 7 Ft $85.80 Black Jacket 10 Ft $ Fits DENTSPLY Cavi-jet 30 G-113 Color coded (1) air, (1) water tube, and (3) low voltage wires cross ref. # INLINE QUICK DISCONNECT $15.10 Same as with 1/8 barb X female SCALER PARTS

58 SCALER PARTS QUICK COUPLER ASSEMBLY $65.90 Female Male Female Coupler only $35.70 with shut-off Male Coupler only $33.00 with shut-off Commonly used on DENTSPLY CAVI-JET, so the air supply line can never mistakenly be plugged into water Quick coupler for air or water Female & male Quick Couplers both have shut-off (2) 1/8 FPT in and out ports Brass construction Not for natural gas DENTSPLY cross ref. # The assembly from DENTSPLY includes fitting on both ends and is plated. Chapman-Huffman s are sold less the fittings and are not plated. CAVITRON TYPE INSERT O-RING KIT $19.30 Fits CAVITRON Jet nozzle, Slimline, P Style, CAVITRON Med and Pel inserts Autoclavable Green color DENTSPLY cross ref. # Pkg. of 12 in resealable bag CAVITRON TYPE INSERT O-RING KIT $19.30 Fits FSI, FSI-SLI AND TFI inserts Autoclavable Black color DENTSPLY cross ref. # Pkg. of 12 NOTE: Vibration from dental handpiece turbines is absorbed by O-rings or quad rings. These O-rings and quad rings eventually breakdown, making the turbine sound like it has worn or defective bearings. By replacing these O-rings or quad rings, the turbine may sound normal again, this may also extend the life of the bearing. LIGHT CONTROL SYSTEM $ length 14 length System incl. light control, remote intensity control, transformer, transformer cord and installation kit NOTE! Handpiece tubing must be ordered separately (See list below) This system operates a bright white light with a small lamp in the handpiece connector Halogen Lamp 3.5 V 720 MA Power Transformer 120 VAC 60Hz 17 W Output 12 VAC 830 MA, also replacement for KAVO transformers, cross ref. #s Old # New # Light control ouput 3.0 to 4.5 VDC* The light can be activated by either foot control or automatic handpiece holder pilot air with the flick of a switch Operates up to two handpieces Time delay feature built-in (twelve second time delay when installed in foot control activation mode) Adjustable intensity control can be remote mounted Compact size 1 1/16 high X 4 3/8 long X 2 3/4 wide *measured at the light control terminals with the lamp lit Note: Conventional tubing used on both straight and coiled tubing assemblies listed below ORDER SEPARATELY HANDPIECE ILLUMINATION TUBING WITH LAMP Black Coiled $ Black Straight $ Gray Coiled $ Gray Straight $ Surf Coiled $ Surf Straight $ Sterling Coiled $ Sterling Straight $ Surf 6 Coiled $ Surf 6 Straight $ REPLACEMENT PARTS Light Control Only $ Halogen Lamp $56.40 Remote Intensity Control $ Transformer $77.90 Transformer Cord Assembly $52.40 Installation Kit $27.60 FIBER OPTICS

59 FIBER OPTICS HANDPIECE ILLUMINATION SYSTEM - LAMP STYLE W/ CONVENTIONAL ASEPSIS TUBING LAMP SYSTEM WITH COILED OR STRAIGHT CONVENTIONAL HANDPIECE TUBING Note: Conventional tubing used on handpiece tubing assemblies listed TUBING TYPE 120 VOLT Black Coiled $ Black Straight $ Gray Coiled $ Gray Straight $ Surf Coiled $ Surf Straight $ Sterling Coiled $ Sterling Straight $ (7 Ft. tubing standard, 12 Ft. special available) $ This Handpiece Illumination System Kit is easily installed to any handpiece control. System is activated from handpiece drive air line back pressure. Handpiece connector will adapt to all standard (5 hole MIDWEST) pattern fiber optic handpieces. Halogen lamp provides intense white light for intra-oral use. ISO standard metal fiber optic handpiece terminal 5 hole MIDWEST pattern with stainless steel nut Conventional asepsis style lightweight, flexible 7 ft. handpiece tubing (12 ft. special available) Halogen lamp 3.5V, 720MA Power transformer 100/240VAC, output 3.7 VDC, 720MA (When installed in Chapman-Huffman system with lamp lit and measured at the transformer leads) Air electric switch Installation hardware and instructions HANDPIECE ILLUMINATION TUBING KIT Note: Conventional tubing used on handpiece tubing assemblies listed Black Coiled $ Black Straight $ Gray Coiled $ Gray Straight $ Surf Coiled $ Surf Straight $ Sterling Coiled $ Sterling Straight $ (7 Ft. tubing standard, 12 Ft. special available) $ Used to add extra handpiece Illumination Tubing Assembly to the Chapman-Huffman Handpiece Illumination Lamp Style System ISO standard metal fiber optic handpiece terminal (5 hole MIDWEST) pattern with stainless steel nut Conventional asepsis style lightweight, flexible 7 ft. handpiece tubing (12 ft. special available) Halogen lamp 3.5V, 720MA Air electric switch Installation hardware and instructions HANDPIECE ILLUMINATION REPLACEMENT TUBING WITH LAMP Black Coiled $ Black Straight $ Gray Coiled $ Gray Straight $ Surf Coiled $ Surf Straight $ Sterling Coiled $ Sterling Straight $ Surf 6 Coiled $ Surf 6 Straight $ FIBER OPTICS (7 Ft. tubing standard, 12 Ft. special available) $ Conventional tubing as pictured with separate drive air, water, chip air & exhaust, extruded in one tubing Replaces tubing assembly in Chapman-Huffman s Handpiece Illumination system Lamp Style & others ISO Standard metal fiber optic Handpiece terminal (5 hole MIDWEST) pattern with stainless steel nut. Conventional asepsis style lightweight flexible 7 ft. handpiece tubing (12 ft. special available) Halogen Lamp 3.5V, 720MA, may be used with AC or DC voltage

60 FIBER OPTICS HANDPIECE ILLUMINATION REPLACEMENT TUBING W/ ISO TYPE C ADAPTER Black Coiled $ Black Straight $ Gray Coiled $ Gray Straight $ Surf Coiled $ Surf Straight $ Sterling Coiled $ Sterling Straight $ Surf 6 Coiled $ Surf 6 Straight $ (7 Ft. tubing standard, 12 Ft. special available) $ Conventional tubing as pictured with separate drive air, water, chip air and exhaust, extruded in one tubing Replaces 7 ft. tubing assembly in systems requiring ISO-C adapter (12 ft. special available) ISO-C standard metal fiber optic handpiece terminal with stainless steel nut Adapts Bien-Air, KAVO, W&H, MIDWEST XGT and other handpieces SWIVEL COUPLER $ EURO HANDPIECE ILLUMINATION SYSTEM - LAMP STYLE LAMP SYSTEM STRAIGHT TUBING TYPE 120 VOLT Black Straight $ Gray Straight $ Surf Straight $ Sterling Straight $ Surf 6 Straight $ (7 Ft. tubing standard, 12 Ft. special available) $ This Handpiece Illumination System Kit is easily installed to any handpiece control. System is activated from handpiece drive air line back pressure. Handpiece connector will adapt to all standard 5 hole MIDWEST pattern fiber optic handpieces. Halogen lamp provides intense white light for intra-oral use. ISO standard metal fiber optic handpiece terminal (5 hole MIDWEST) pattern with stainless steel nut Euro asepsis style lightweight, flexible 7 ft. handpiece tubing (12 ft. special available) Halogen lamp 3.5V, 720MA Power transformer 100/240VAC, output 3.7 VDC, 720MA (When installed in Chapman-Huffman system with lamp lit and measured at the transformer leads) Air electric switch Installation hardware and instructions FIBER OPTICS Replacement Bulb Only $48.50 KAVO style handpiece Coupler 6-Pin, Bulb in Coupler Style Swivel Bulb included with Coupler Fits Chapman-Huffman 6-Pin tubing and others KAVO Cross ref. # 460LE/ EURO HANDPIECE ILLUMINATION TUBING KIT Black Straight $ Gray Straight $ Surf Straight $ Sterling Straight $ Surf 6 Staight $ (7 Ft. tubing standard, 12 Ft. special available) $ Used to add extra handpiece Illumination Tubing Assembly to the Chapman-Huffman Euro Illumination Lamp Style System ISO standard metal fiber optic handpiece terminal. (5 hole MIDWEST) pattern with stainless steel nut Euro asepsis style lightweight, flexible 7 ft. handpiece tubing (12 ft. special available) Halogen lamp 3.5V, 720MA Air electric switch Installation hardware and instructions

61 FIBER OPTICS EURO HANDPIECE ILLUMINATION REPLACEMENT TUBING WITH LAMP Black Straight $ Gray Straight $ Surf Straight $ Sterling Straight $ Surf 6 Straight $ (7 Ft. tubing standard, 12 Ft. special available) $ Used to replace tubing assembly in Chapman-Huffman s Handpiece Illumination System - Lamp Style and others ISO standard metal fiber optic handpiece terminal (5 hole MIDWEST) pattern with stainless steel nut Euro asepsis style lightweight, flexible 7 ft. handpiece tubing (12 ft. special available) Halogen lamp 3.5V, 720MA Lamp may be used with AC or DC voltage SWIVEL COUPLER $ Replacement Bulb Only $48.50 KAVO style handpiece Coupler 6-Pin, Bulb in Coupler Style Swivel Bulb included with Coupler Fits Chapman-Huffman 6-Pin tubing and others KAVO Cross ref. # 460LE/ TRANSFORMER 120 VOLT $46.90 Replaces transformers used in Chapman-Huffman Handpiece Illumination System - Lamp Style Output MA (When installed in Chapman-Huffman system with lamp lit and measured at the transformer leads) FIBER OPTICS EURO HANDPIECE ILLUMINATION REPLACEMENT TUBING WITH ISO TYPE C ADAPTER Black Straight $ Gray Straight $ Surf Straight $ Sterling Straight $ Surf 6 Straight $ (7 Ft. tubing standard, 12 Ft. special available) $ Used to replace tubing assembly in systems requiring ISO-C adapter Euro style 7 ft. tubing (12 ft. special available) ISO-C standard metal fiber optic handpiece terminal with stainless steel nut Adapts BIEN-AIR, KAVO, W&H, MIDWEST XGT and other handpieces HALOGEN LAMP $56.40 Use in Chapman-Huffman handpiece Illumination System - Lamp Style Lamp specifications: 3.5 V, 720 MA Body Dia,.160 (4.07mm) Overall Length.856 (21.74mm) Pin Length.170 (4.32mm) Pin Dia,.020 (.51mm) May be used with AC or DC voltage HANDPIECE ILLUMINATION SYSTEM $ INSTALLATION KIT Power transformer 120 VAC, Output 3.7 VDC, 720 MA (When installed in Chapman-Huffman system with lamp lit and measured at the transformer leads) Air Electric Switch Installation hardware and instructions With this kit, and ordering separately any 55 Series Handpiece Illumination replacement tubing with ISO Type C adapter, you can make your own Handpiece Illumination System with conventional tubing or Euro style tubing. HANDPIECE ADD ON INSTALLATION KIT $45.00 AIR ACTUATED ELECTRIC SWITCH ASSEMBLY With this kit and ordering separately any 55 Series Handpiece Illumination Replacement Tubing, with ISO-C type adapter, or lamp style replacement tubing, you can make your own Handpiece Illumination add-on Tubing Kit, with conventional tubing or Euro style tubing 118 ISO TYPE C ADAPTER $43.00 Easily converts Chapman-Huffman handpiece illumination tubing connectors from American ISO standard to European ISO-C standard. Adapts to BIEN-AIR, KAVO, W&H, MIDWEST XGT and other handpieces Normally Open $ V, 5 amp switch Requires 10 PSI for activation 1/16 barb fitting 18 AWG wire, 6 Mounting hardware 15/32-32 thread with nut 119

62 FIBER OPTICS TERMINAL STRIP ASSEMBLY $ pole terminal strip accepts AWG wire with screw clamp connections Used for Chapman-Huffman Illumination System wire connections Includes mounting tape and mounting screw LED TYPE TRANSFORMER 115/230 VOLT $45.20 Replacement transformer used in Chapman-Huffman LED type Handpiece Illumination System Input 115/230 VAC Output 3.4 VDC FIBER OPTICS 120 HANDPIECE ILLUMINATION REPLACEMENT TUBING WITH LED BULB Black Coiled $ Black Straight $ Gray Coiled $ Gray Straight $ Surf Coiled $ Surf Straight $ Sterling Coiled $ Sterling Straight $ Surf 6 Coiled $ Surf 6 Straight $ (7 Ft. tubing standard, 12 Ft. special available) $ Conventional tubing as pictured with separate drive air, water, chip air & exhaust, extruded in one tubing Replaces tubing assembly in Chapman-Huffman s Handpiece Illumination system Lamp Style & others ISO Standard metal fiber optic Handpiece terminal (5 hole MIDWEST) pattern with stainless steel nut. Conventional asepsis style lightweight flexible tubing (7 std, 12 special) LED bulb, 3.4V DC ONLY, 100MA LED BULB ONLY WORKS WITH DC VOLTAGE EURO HANDPIECE ILLUMINATION REPLACEMENT TUBING WITH LED BULB Black Straight $ Gray Straight $ Surf Straight $ Sterling Straight $ Surf 6 Straight $ (7 Ft. tubing standard, 12 Ft. special available) $ Used to replace tubing assembly in Chapman- Huffman s Handpiece Illumination System - Lamp style and others ISO standard metal fiber optic handpiece terminal (5 hole MIDWEST) pattern with stainless steel nut Euro asepsis style lightweight flexible tubing (7 std, 12 special) LED bulb, 3.4V DC ONLY, 100MA LED BULB ONLY WORKS WITH DC VOLTAGE LED TYPE HANDPIECE ILLUMINATION $93.20 SYSTEM INSTALLATION KIT Transformer Input 115/230 VAC Output 3.4 VDC Air electric switch Installation hardware and instructions With this kit, and ordering separately any 55 series Handpiece Illumination Replacement Tubing with ISO Type-C adapter (euro or conventional), you can make your own Handpiece Illumination System for powering LED bulb type coupler HANDPIECE ADD-ON INSTALLATION KIT $45.00 With this kit, and ordering separately, any 55 series Handpiece Illumination Replacement Tubing, with ISO-C type adapter, or lamp style replacement tubing, or 75 series tubing with LED lamp, you can make your own Handpiece Illumination Tubing Kit, with conventional tubing or euro style tubing SWIVEL COUPLER WITH WATER REGULATION Coupler with $ LED bulb KAVO style handpiece coupler with water regulation 6-pin, bulb-in-coupler style swivel Bulb included with coupler Fits Chapman-Huffman 6-pin tubing & others With LED must use transformer or LED Kit (see above) KAVO cross ref. # w/ LED BULB 465LED/

63 FIBER OPTICS SWIVEL COUPLER WITH LED BULB $ KAVO style handpiece coupler with LED bulb 6-pin, bulb-in-coupler style swivel LED bulb included with coupler Fits Chapman-Huffman 6-pin tubing & others With LED must use transformer or LED Kit (see pg. 94) KAVO cross ref. # 460LED/ POSITION ELECTRICAL CONNECTOR $44.70 Fits KAVO KL700 ELECTROTORQUE PLUS Tubing FIBER OPTICS KAVO KL700 ELECTROTORQUE PLUS STYLE $ TUBING ASSEMBLY Fits KAVO KL701 Brushless Electric Motor Features water flow control at connector Very light gray in color Supplied without 5-position green electrical connector or ferrite bead. KAVO cross ref. # FERRITE BEAD $3.40 Suppression filter used to reduce electrical noise Used on KAVO KL700 ELECTROTORQUE PLUS Tubing KAVO ELECTROTORQUE STYLE $ TUBING ASSEMBLY Older KAVO style Electrotorque Tubing Assembly, 78 /2000mm long Fits KAVO 196/200 motors without swivel Very light gray in color No water flow control KAVO cross ref. # REPLACEMENT TUBING LAMP MODULE STYLE (BLACK GASKET) WITH LONG NUT Gray $ KAVO TLC MOTOR STYLE $ TUBING ASSEMBLY Fits KAVO 702 and 703 Motors KAVO cross ref. # No water flow control PELTON & CRANE cross ref. # BLACK GASKET ELECTRIC MOTOR HOSE ASSEMBLY $ Fits the following ADEC/W&H SYNEA MOTORS: EA-40LT EA-50LT, EA-51LT and EA-52LED Surf 6 color Anti-bacterial water tube 78 long (3) tubes, (6) wires Water flow control ADEC cross ref. # long ADEC cross ref. # long HOWEVER, Chapman-Huffman, Inc. hose is 78 long Straight replacement tubing ISO - B lamp module style (internal) for the following: Midwest old style light-pak system KINETIC # 1211 ISO -B Light source straight tubings Henry SCHEIN MASTERLIGHT ISO-B (5 hole) tubing Long stainless steel handpiece nut to accept lamp module Includes lamp module assembly 5-hole (sold on pg. 45) 3.5V 720MA Standard length 5 ft

64 FIBER OPTICS REPLACEMENT TUBING LAMP MODULE STYLE (RED GASKET) WITH LONG NUT FIBER OPTIC ILLUMINATOR $ AND TRANSFORMER REPLACEMENT COMPONENTS Fiber Optic Illuminator $ FIBER OPTICS Illuminator Transformer $ RED GASKET Connecting Cable Assembly $83.60 Lamp Replacement $36.40 Replacement for DCI ISO 5-hole Power Optic Handpiece Tubing 4-hole asepsis handpiece tubing w/ connector and long nut Includes lamp module (red gasket type, sold on pg. 45a) Length Part By Color DCI Cross Ref. 5 Tubing Black Straight $ Gray Straight $ Surf Straight $ Sterling Straight $ Surf 6 Straight $ Tubing Black Straight n/a $ Gray Straight $ Surf Straight $ Sterling Straight $ Surf 6 Straight n//a $ Tubing Black Straight n/a $ Gray Straight $ Surf Straight $ Sterling Straight $ Surf 6 Straight n/a $ More compact size for additional applications Connections for one, two, or three fiber optic handpiece tubings Designed to mount to new or existing dental units The above unit and components work as replacements for KAVO LS2 Fiber Optic Illuminator mounts near the unit head to provide illumination through a fiber optic tubing assembly with a fiber optic bundle (tubing assembly not included) A switch on the Illuminator selects between medium and high intensity The fiber optic Illuminator can be set for auto holder or foot control activation, at time of installation Includes 120 VAC transformer with power cord Connecting cable supplies low voltage electrical power to the Illuminator from the transformer Installation hardware packet and instruction booklet included Illuminator Dimensions 2 high X 3 wide X 6 1/4 long Transformer Dimensions 2 7/8 high X 3 3/8 wide X 3 1/2 long White finish 12 Tubing Black Straight n/a $ Gray Straight $ Surf Straight $ Sterling Straight $ Surf 6 Straight n/a $ LIGHT SOCKET ASSEMBLY $50.20 Light socket fits Chapman-Huffman , Fiber Optic Illuminator Not for KAVO LS2 Coiled Tubing Black Coiled $ Gray Coiled $ Surf Coiled $ Sterling Coiled $ Surf 6 Coiled $

65 FIBER OPTICS LIGHT SOURCE FOOT CONTROL ACTIVATED (2 HP LIGHT SOURCE SHOWN) 2 HP Foot Control Activated $ HP Foot Control Activated $ Foot control activated Connections for two or three handpieces High intensity adjustable white light Uses standard bulb ( ) Compact size Dimensions: 7 1/2 X 3 1/2 X 4 1/2 Weighs 3 pounds Fan cooled White housing STANDARD STRAIGHT WITH TOUCH CONTROL WIRE - ASEPSIS TUBING Tubing Size Part Number By Color ALL WITH METAL CONNECTORS 5 tubing w/ 7 bundle Surf $ Gray $ tubing w/ 9 bundle Black $ Surf $ Gray $ tubing w/ 12 bundle Black $ Surf $ Gray $ tubing w/ 14 bundle Black $ Surf $ Gray $ Surf $ FIBER OPTICS LIGHT SOURCE AUTO HOLDER ACTIVATED STANDARD COILED WITH TOUCH CONTROL WIRE - ASEPSIS TUBING 7 tubing w/ 12 bundle Black $ (3 HP LIGHT SOURCE SHOWN) 2 HP Auto Holder Activated $ HP Auto Holder Activated $ Auto holder activated (when fiber optic handpiece is picked up from auto pilot valve holder, light source will turn on automatically) Connections for two or three handpieces High intensity adjustable white light Uses standard bulb ( ) Compact size Dimensions: 7 1/2 X 3 1/2 X 4 1/2 Weighs 3 pounds Fan cooled White housing SWIVEL COUPLER $ tubing w/ 14 bundle Black $ Surf $ Gray $ Surf $ STANDARD STRAIGHT - ASEPSIS TUBING 5 tubing w/ 7 bundle Gray $ tubing w/ 9 bundle Surf $ Gray $ tubing w/ 12 bundle Surf $ Gray $ tubing w/ 14 bundle Black $ Surf $ Gray $ This coupler works on the four Fiber Optic Handpiece Tubings on the next page (pg. 100) KAVO style handpiece Coupler 5 hole Fiber Optic Standard Swivel Used with a fiber optic tubing having a fiber optic bundle to convey light to the Coupler & Handpiece KAVO Cross ref. # 1390/ STANDARD COILED - ASEPSIS TUBING 7 tubing w/ 14 bundle Black $ Surf $ Gray $

66 FIBER OPTICS LAMP HOLDER SOCKET ASSEMBLY $21.50 HIGH VOLTAGE Fits Chapman-Huffman Light Source , , and and others 120 volt - high voltage rated 300 volt max Also fits other high voltage applications Fits MIDWEST INSIGHT light source Socket is designed to the ANSI codes and international standards Lamp holders are UL and CSA approved THERMAL FUSE $20.00 Fits Chapman-Huffman light sources , , and Protects light source by opening circuit if unit over heats Reattach using Loctite 414 Warning: Only replacing this fuse may not correct your light source problem, as this fuse opens when some other component has failed and made unit overheat PLASTIC LIGHT SOURCE DOOR $46.60 FIBER OPTICS DIMMER CIRCUIT BOARD $98.70 Fits Chapman-Huffman light sources , , and volt Fits fiber optic light source , , and DOOR LOCK ASSEMBLY $7.10 FAN MOTOR $79.30 Fits Chapman-Huffman light sources , , and Secures light source door to unit housing White plastic construction Fits Chapman-Huffman light sources , , and Keeps light source cool 120 VAC PLASTIC BARB FITTING Black - Pkg. of $14.50 White - Pkg. of $14.50 Fits Chapman-Huffman light sources , , and male thread X 1/16 barb, plastic construction FAN MOTOR IMPELLER $23.50 ILLUMINATOR AIR ELECTRIC SWITCH Normally Open (Positive) $35.90 Normally Closed (Negative) $35.90 Heavy duty air electric switch for the repair of fiber optic light source controls , , , and used with white barb used with black barb Fits Chapman-Huffman light sources , , and White color POTENTIOMETER WITH SWITCH $29.10 Fits Chapman-Huffman light sources , , and Light intensity adjustment component 250K potentiometer with DPST switch Knob not included HANDPIECE ILLUMINATION SYSTEM $49.10 INSTANT ON KIT One kit required for each Fiber Optic Handpiece Converts foot control activated Illuminator to Auto Holder Activated Illuminator Incl. valve, fittings, tubing & installation instructions

67 TUBING NON-FIBER OPTIC 4-HOLE EURO STYLE HANDPIECE TUBING WITH NUT & CONNECTOR Black Straight $57.50 Gray Straight $57.50 Surf Straight $57.50 Sterling Straight $57.50 Surf 6 Straight $57.50 Non Fiber Optic 4 Hole Euro Asepsis Style lightweight, flexible 7 ft. handpiece tubing 12 ft. special available $ HOLE ASEPSIS HANDPIECE TUBING WITH NUT & CONNECTOR NEW! NEW! Black Coiled $31.60 Black Straight $24.50 Gray Coiled $31.60 Gray Straight $24.50 Gray Straight Silcryn $45.00 Surf Coiled $31.60 Surf Straight $24.50 Sterling Coiled $31.60 Sterling Straight $24.50 Sterling Straight Silcryn $45.00 Surf 6 Coiled $31.60 Surf 6 Straight $24.50 (Special length available in straight tubing) $ HOLE ASEPSIS HANDPIECE TUBING Black Coiled $18.60 Black Straight $1.76/ft. Black 100 Roll A-00 $ Black 100 Spool S-00 $ Gray Coiled $18.60 Gray Straight $1.76/ft. Gray 100 Roll A-00 $ Gray 100 Spool S-00 $ Surf Coiled $18.60 Surf Straight $1.76/ft. Surf 100 Roll A-00 $ Surf 100 Spool S-00 $ Sterling Coiled $18.60 Sterling Straight $1.76/ft. Sterling 100 Roll A-00 $ Sterling 100 Spool S-00 $ Surf 6 Coiled $18.60 Surf 6 Straight $1.76/ft. Surf Roll A-00 $ Surf Spool S-00 $ SILCRYN 4 HOLE ASEPSIS HANDPIECE TUBING Gray Straight $2.08/ft. Gray 100 Roll A-00 $ Gray 100 Spool S-00 $ Sterling Straight $2.08/ft. Sterling 100 Roll A-00 $ Sterling100 Spool S-00 $ TUBING HANDPIECE EXHAUST MUFFLER $17.70 Attaches to any four-hole handpiece tubing Particularly effective in quieting handpiece exhaust inside the control head 4 HOLE ASEPSIS HANDPIECE TUBING W/ NUT & CONNECTOR (4 PIGTAIL) Gray Coiled $ Pigtail on one end and 4 pigtail on other end HSP HANDPIECE NUT SLEEVE $12.60 Fits Chapman-Huffman fiber optic handpiece tubing nut Installing this sleeve on Chapman-Huffman s fiber optic handpiece tubing nut, allows the nut to activate the HSP Auto Holder 4 HOLE ASEPSIS HANDPIECE TUBING (4 PIGTAIL) Gray Coiled $ Pigtail on one end and 4 pigtail on other end

68 TUBING 132 KAVO / MIDWEST & STAR STYLE REPLACEMENT TUBING 2 HOLE HANDPIECE TUBING Black 7 Straight $37.30 Black 10 Straight $40.60 Gray 7 Straight $37.30 Gray 10 Straight $40.60 Surf Coiled $37.30 Surf 10 Straight $40.60 Four Hole tubing with (2) 24 AWG low voltage wires Gray Coiled $17.20 Gray Straight $1.56/ft. Gray 100 Roll A-00 $85.00 Gray 100 Spool S-00 $ HOLE ASEPSIS HANDPIECE TUBING W/ NUT & CONNECTOR 3 HOLE ASEPSIS HANDPIECE TUBING Black Coiled $29.40 Black Straight $23.00 Gray Coiled $29.40 Gray Straight $23.00 Surf Coiled $29.40 Surf Straight $23.00 Black Coiled $15.90 Black Straight $1.56/ft. Black 100 Roll A-00 $ Black 100 Spool S-00 $ Gray Coiled $15.90 Gray Straight $1.56/ft. Gray 100 Roll A-00 $ Gray 100 Spool S-00 $ Surf Coiled $15.90 Surf Straight $1.56/ft. Surf 100 Roll A-00 $ Surf 100 Spool S-00 $ Surf 6 Straight $1.56/ft. Surf Roll A-00 $ Surf Spool S-00 $ HOLE ASEPSIS SYRINGE TUBING 1 HOLE SYRINGE TUBING COILED Black Coiled $10.90 Black Straight $1.04/ft. Black 100 Roll A-00 $52.20 Black 100 Spool S-00 $56.60 Gray Coiled $10.90 Gray Straight $1.04/ft. Gray 100 Roll A-00 $52.20 Gray 100 Spool S-00 $56.60 Surf Coiled $10.90 Surf Straight $1.04/ft. Surf 100 Roll A-00 $52.20 Surf 100 Spool S-00 $56.60 Sterling Coiled $10.90 Sterling Straight $1.04/ft. Sterling 100 Roll A-00 $52.20 Sterling 100 Spool S-00 $56.60 Surf 6 Coiled $10.90 Surf 6 Straight $1.04/ft. Surf Roll A-00 $52.20 Surf Spool S-00 $56.60 Black $22.50 Gray $22.50 Surf $22.50 Single Hole 1/8 OD x 1/16 ID 7 Foot length ADEC STYLE SYRINGE TUBING ASSEMBLY Gray Sheath $17.60 Surf Sheath $17.60 Sterling Sheath $17.60 Surf 6 Sheath $ hole tubing 7 ft. standard tubing length Outer sheath will fit inside Chapman-Huffman syringe handle and others. Includes sheath retainer & ring Inner syringe tubing is gray Includes spring clip and retainer sleeve SILCRYN 2 HOLE JACKETED SYRINGE TUBING Gray Straight $1.76/ft. Gray 100 Roll A-00 $65.50 Gray 100 Spool S-00 $67.70 Sterling Straight $1.76/ft. Sterling 100 Roll A-00 $65.50 Sterling100 Spool S-00 $ TUBING

69 3 HOLE ASEPSIS SYRINGE TUBING Black Coiled $27.50 Black Straight $1.90/ft. Black 100 Roll A-00 $ Black 100 Spool S-00 $ Gray Coiled $27.50 Gray Straight $1.90/ft. Gray 100 Roll A-00 $ Gray 100 Spool S-00 $ UNIVERSAL / BELMONT STYLE NUT $21.50 AND CONNECTOR Connects to one, two, three or four-hole tubing Metal connector and stainless steel nut Used as universal or as replacement for BELMONT AUTOCLAVABLE HANDPIECE GASKETS MIDWEST 4 Hole $3.00 MIDWEST 5 Hole $3.00 BORDEN 2/3 Hole $3.00 TUBING ADEC STYLE SYRINGE TUBING ASSEMBLY Gray Sheath $19.50 Surf Sheath $19.50 Sterling Sheath $19.50 Surf 6 Sheath $ hole tubing 7 ft. standard tubing length Outer sheath will fit inside Chapman-Huffman syringe handle and others Inner syringe tubing is gray 4 HOLE 5 HOLE 6 HOLE 2 OR 3 HOLE KAVO 6 Hole $16.70 KAVO cross ref. # All are Autoclavable (325 F) BRAIDED UMBILICAL BUNDLE $11.10/ft. TUBING HANDPIECE NUT AND CONNECTOR $17.00 BORDEN Style - 3 Hole Connects to one, two or three-hole tubing Metal connector and stainless steel nut Braided fabric housing (gray) (2) 1/4 OD interconnect (9) 1/8 OD interconnect (4) 24 AWG low voltage wire BRAIDED ACCESSORY BUNDLE $10.20/ft. HANDPIECE NUT AND CONNECTOR $15.40 Braided fabric housing (gray) (8) 1/8 OD interconnect tubing color coded MIDWEST Style - 4 Hole Connects to one, two, three or four-hole tubing Metal connector and stainless steel nut BRAIDED UMBILICAL BUNDLE $13.80/ft. UNIVERSAL / BELMONT STYLE NUT $21.50 AND CONNECTOR Gray, braided fabric housing (1) 1/4 OD interconnect (9) 1/8 OD interconnect (2) 24 AWG low voltage wires Color coded interconnects Connects to one, two, or three-hole tubing Metal connector and stainless steel nut Used as universal or as replacement for BELMONT

70 1/8 OD POLYURETHANE TUBING 1/4 OD BRAIDED TUBING Gray Braided Straight $1.98/ft. Clear A S-00 Gray A S-00 Gray Braided 100 Roll A-00 $ Gray Braided 100 Spool S-00 $ Red A S-00 White A S-00 Blue A S-00 Blue Braided Straight $1.98/ft. Blue Braided 100 Roll A-00 $ Blue Braided 100 Spool S-00 $ Blue Transparent TRANS A-00TRANS S-00TRANS Green A S-00 TUBING Orange A S-00 Yellow A S-00 Yellow Transparent TRANS A-00TRANS S-00TRANS Purple A S-00 3/8 OD POLYURETHANE TUBING TUBING Surf A S-00 Blue A S-00 Yellow A S-00 Clear A S-00 Red A S-00 Green A S-00 1/4 OD POLYURETHANE TUBING NEW! NEW! Clear A S-00 Gray A S-00 Red A S-00 White A S-00 Blue A S-00 Green A S-00 Orange A S-00 Yellow A S-00 Yellow Transparent TRANS A-00TRANS S-00TRANS POLY-FLO TYPE TUBING 1/4 OD X.170 ID Per Foot $.84/ft. 100 Roll A-00 $ /8 OD X 1/4 ID Per Foot $1.36/ft. 100 Roll A-00 $ Not meant for flexible applications Used for water supply to single or twin vacuum pumps that have building water shut-off valves that are shut-off at the end of each work day Burst 73 F = 550 PSI Use w/poly nut w/metal sleeve (1/4) or (3/8) type fittings only Natural polyethylene color

71 2 HOLE ASEPSIS FOOT CONTROL TUBING 3 HOLE FOOT CONTROL TUBING Gray Vinyl $1.26/ft. Gray 100 Roll A-00 $ Gray 100 Spool S-00 $ Gray Polyurethane $2.40/ft. Gray 100 Roll A-00 $ Gray 100 Spool S-00 $ Surf Vinyl $1.26/ft. Surf 100 Roll A-00 $ Surf 100 Spool S-00 $ Sterling Polyurethane $2.40/ft. Sterling 100 Roll A-00 $ Sterling 100 Spool S-00 $ Sterling Vinyl $1.26/ft. Sterling 100 Roll A-00 $ Sterling 100 Spool S-00 $ Surf 6 Polyurethane $2.40/ft. Surf Roll A-00 $ Surf Spool S-00 $ TUBING Surf 6 Vinyl $1.26/ft. Surf Roll A-00 $ Surf Spool S-00 $ Gray Polyurethane $2.20/ft. Gray 100 Roll A-00 $ Gray 100 Spool S-00 $ Surf Polyurethane $2.20/ft. Surf 100 Roll A-00 $ Surf 100 Spool S-00 $ Sterling Polyurethane $2.20/ft. Sterling 100 Roll A-00 $ Sterling 100 Spool S-00 $ Surf 6 Polyurethane $2.20/ft. Surf Roll A-00 $ Surf Spool S-00 $ HOLE ASEPSIS FOOT CONTROL TUBING Gray Polyurethane $3.12/ft. Gray 100 Roll A-00 $ Gray 100 Spool S-00 $ Surf Polyurethane $3.12/ft. Surf 100 Roll A-00 $ Surf 100 Spool S-00 $ Sterling Polyurethane $3.12/ft. Sterling 100 Roll A-00 $ Sterling 100 Spool S-00 $ Surf 6 Polyurethane $3.12/ft. Surf Roll A-00 $ Surf Spool S-00 $ TUBING 4 HOLE FOOT CONTROL TUBING 2 HOLE FOOT CONTROL TUBING Gray Polyurethane $1.90/ft. Gray 100 Roll A-00 $ Gray 100 Spool S-00 $ Gray Vinyl $1.83/ft. Gray 100 Roll A-00 $ Gray 100 Spool S-00 $ Gray Polyurethane $3.12/ft. Gray 100 Roll A-00 $ Gray 100 Spool S-00 $

72 5 HOLE FOOT CONTROL TUBING Gray Polyurethane $3.70/ft. Gray 100 Roll A-00 $ Gray 100 Spool S-00 $ /16 ID SALIVA EJECTOR TUBING Gray Vinyl $1.14/ft. Gray Vinyl A-00 $72.00 Gray 100 Spool S-00 $76.50 TUBING HOLE FOOT CONTROL TUBING WITH SHEATH Gray Sheath $8.20/ft. Surf 6 Sheath $8.20/ft. ADEC Cross ref # ADEC Style 5 hole asepsis replacement Foot Control tubing with sheath Fits all Chapman-Huffman Relay Foot Controls Color and Dash Coded internal tubings 7/32 ID SALIVA EJECTOR TUBING Gray Vinyl $1.10/ft. Gray 100 Roll A-00 $70.60 Gray 100 Spool S-00 $75.20 Surf Vinyl $1.10/ft. Surf 100 Roll A-00 $70.60 Surf 100 Spool S-00 $75.20 Sterling Vinyl $1.10/ft. Sterling 100 Roll A-00 $70.60 Sterling 100 Spool S-00 $75.20 Surf 6 Vinyl $1.10/ft. Surf Roll A-00 $70.60 Surf Spool S-00 $75.20 Braided Vinyl $2.60/ft. Braided 100 Roll A-00 $ Braided 100 Spool S-00 $ /32 ID SALIVA EJECTOR TUBING Black Vinyl $.94/ft. Black 100 Roll A-00 $64.20 Black 100 Spool S-00 $68.70 SILCRYN 7/32 ID SALIVA EJECTOR TUBING Gray Silcryn $1.14/ft. Gray 100 Roll A-00 $87.40 Gray 100 Spool S-00 $91.70 Sterling Silcryn $1.14/ft. Sterling 100 Roll A-00 $87.40 Sterling 100 Spool S-00 $91.70 FLUSH CUP TUBING $5.60/ft. Fits ADEC flush cup 1/4 ID drain tube X 3/16 ID water tube Gray ADEC cross ref. # FLUSH CUP TUBING $7.40/ft. 7/16 ID DRAIN TUBING 1/2 ID ASEPSIS VACUUM TUBING SILCRYN 7/16 ID 6 SIDED VACUUM TUBING 7/16 ID drain tube X.135 ID water tube Gray Gray Vinyl $2.10/ft. Gray 100 Roll A-00 $ Gray 100 Spool S-00 $ Gray 25 Ft. Roll $80.00/25 ft. Surf 25 Ft. Roll $80.00/25 ft. Sterling 25 Ft. Roll $80.00/25 ft. Surf 6 25 Ft. Roll $80.00/25 ft. Smooth exterior surface Inner bore construction designed to resist collapsing and kinking Ultra flexibility Lightweight Contains no latex Gray 25 Ft. Roll $82.50/25 ft. Sterling 25 Ft. Roll $82.50/25 ft. 141 TUBING

73 1/2 ID ASEPSI-FLEX VACUUM TUBING Gray 25 Ft. Roll $85.00/25 ft. Surf 25 Ft. Roll $85.00/25 ft. Sterling 25 Ft. Roll $85.00/25 ft. Surf 6 25 Ft. Roll $85.00/25 ft. Smoother exterior surface Lightweight Ultra flexibility Special smooth inner bore construction Crush and kink resistant 3/4 ID VACUUM PUMP TUBING 25 Ft. Roll $105.00/25 ft. Commonly used for the plumbing of vacuum pump to building and drain 3/4 ID X 1 OD clear with white helix reinforced wall Smooth inner surface for easy flow Smooth outer surface Flexible 1 ID VACUUM PUMP TUBING TUBING 5/8 ID ASEPSI-FLEX VACUUM TUBING Gray 25 Ft. Roll $120.00/25 ft. Smoother exterior surface Lightweight Ultra flexibility Special smooth inner bore construction Crush and kink resistant 25 Ft. Roll $140.00/25 ft. Commonly used for the plumbing of vacuum pump to building and drain 1 ID X 1 1/4 OD clear w/ white helix reinforced wall Smooth inner surface for easy flow Smooth outer surface Flexible TUBING CHAYES TYPE BRAIDED VACUUM TUBING $7.50/ft. Gray braided latex tubing 3/8 ID X 5/8 OD Fits CHAYES retraction pulleys and others Note! Not recommended for use within 5 ft. of vacuum handpieces ROUTING CABLE ASSEMBLY $50.20 For pulling an extra 1/8 OD or 1/4 OD tubing, or a needed low voltage electrical wire through an existing umbilical assembly 12 ft. in length Stainless steel construction Easily coiled to fit in any tool case 142 PVC FLEXIBLE PIPE 3/4 ID $8.20/ft. 1 ID $8.50/ft. 1 1/4 ID $10.75/ft. 1 1/2 ID $12.00/ft. The Flexible Pipe is designed for cementing into PVC slip fittings like you would rigid PVC pipe Used for water injected vacuum pump intake and exhaust line only Flexible for easy handling and installation Use with listed PVC solvent cements and primers Color - white Note! Not recommended for static pressure applications CORRUGATED TUBING All Gray Tubing 25 Ft. Length 1/2 ID Vacuum $66.00/25 ft. 5/8 ID Vacuum $75.00/25 ft. 3/4 ID Vacuum or Umbilical $92.00/25 ft. 1 ID Vacuum or Umbilical $108.00/25 ft. 1 1/4 ID Umbilical $118.00/25 ft. 1 1/2 ID Umbilical $140.00/25 ft. 1 3/4 ID Umbilical $148.00/25 ft. 2 ID Umbilical $175.00/25 ft. 143

74 CORRUGATED TUBING CUFFS NON-RELIEVING MINIATURE REGULATOR $ /8 ID $3.20 3/4 ID $3.50 7/8 ID $ ID $ /4 ID $ /2 ID $ ID $8.90 NEW! 3 ports thread (1) in (2) out Mounting hardware Non-relieving Air or water service 150 PSI max Redesigned for more precise adjustment Replaces or works in place of DCI number 7203 TUBING These cuffs fit the vacuum and umbilical tubing Chapman-Huffman stocks Also, they create a smooth fit that easily connects to a vacuum port and makes a tight fit around the end of the tubing The small end of the cuff is the same ID as the ID of the tubing (no flow restriction) The large end of the cuff is threaded, making installation quick and simple. Simply screw the threaded end of the cuff onto the outside of the tubing for a strong, secure connection. Gray color RELIEVING MINIATURE REGULATOR $37.60 Relieving type air regulator 3 ports thread (1) in (2) out Mounting hardware 125 PSI max ADEC cross ref. # RELIEVING MINIATURE PRE-REGULATOR $40.40 UMBILICAL AND FOOT CONTROL TUBING FLANGES 9/16 ID Flange $6.80 (Fits foot control tubing) 7/8 ID Flange $7.00 (Fits 1/2 ID & 5/8 ID tubing) 1 ID Flange $9.30 (Fits 3/4 ID tubing) 1 3/8 ID Flange $11.00 (Fits 1 ID tubing) 1 5/8 ID Flange $13.90 (Fits 1 1/4 ID tubing) 2 ID Flange $16.60 (Fits 1 1/2 ID & 1 3/4 ID tubing) Aluminum Construction Light gray Powder Coat finish Mounting screws Commonly used as pre-regulator to floor valves in ADEC systems Relieving type air regulator Port sizes Input - 1/8 MPT Output - (2) threaded ports 125 PSI max. ADEC cross ref. # PRESET RELIEVING MINIATURE REGULATOR $37.60 Preset to 40 PSI Relieving type air regulator 3 ports thread (1) port in (2) ports out 125 PSI maximum IN Used to regulate air pressure to auxiliary clean water supply bottle on Chapman-Huffman Clean Water Systems, , , , , , , , and With this preset regulator, bottle pressure cannot exceed recommended pressure Mounting hardware Brass construction, nickel plated REGULATORS & FILTERS

75 DENTSPLY TYPE WATER PRESSURE $65.60 REGULATOR Fits the following units CAVITRON 2002 CAVITRON 3000 PROPHY-JET 30 CAVI-JET 30 CAVI-ENDO 25 CAVI-MED DENTSPLY cross ref. # WATER PRESSURE REGULATOR WITH $80.00 EXTENDED ADJUSTMENT STEM Fits DENTSPLY products with this configuration Also fits CAVITRON JET-30 DENTSPLY cross ref. # REGULATOR DIAPHRAGM ASSEMBLY $20.00 Fits and regulators Non-relieving Norgren REGULATOR DIAPHRAGM KIT $32.50 MINIATURE COALESCING AIR FILTER ASSEMBLY Fits and regulators Also fits water control block in DENTECH cuspidor and cup filler Non-relieving Norgren Miniature Coalescing $ Air Filter Assembly Coalescing Filter Element $ SPS TYPE WATER REGULATOR $ Replacement Bowl $33.40 REGULATORS & FILTERS Fits CAVITRON JET with SPS Technology and CAVITRON SPS Ultrasonic scaler with SPS Technology DENTSPLY cross ref. # (old) DENTSPLY cross ref. # (new) AIR OR WATER REGULATOR ASSEMBLY $58.70 Non-relieving PSI adjustment 1/8 pipe ports (4) Brass body construction Adjustment knob with lock Norgren WATER FILTER REGULATOR ASSEMBLY $ For water use only Non-relieving 0-50 PSI adjustment 1/8 pipe ports (4) Brass body construction Adjustment knob with lock 5 micron filtration Norgren Ideal for those individual handpiece tubings having oil problems High efficiency oil-removal filter Coalescing filter element PPM 1 1/2 diameter x 3 1/2 long Transparent bowl Maximum inlet pressure 10 bar/150 PSI (2) 1/8 FPT Ports WATER FILTER ASSEMBLY $92.70 Replacement Filter Element $16.50 Maximum 150 PSI 5 micron filtration Brass body construction (2) 1/8 FPT ports 3 1/2 long X 1 1/2 dia. Norgren WATER FILTER BOWL $24.40 O-Ring Pkg. of V-00 $5.80 Fits Water Filter & Water Filter Regulator Assembly Norgren REGULATORS & FILTERS

76 AIR FILTER REGULATOR ASSEMBLY $89.80 FILTER REGULATOR BOWL ASSEMBLY $23.60 Relieving PSI adjustment 1/8 pipe ports (4), Aluminum body construction Manual moisture bowl drain Adjustment knob with lock 5 micron filtration Norgren O-Ring Pkg. of V-00 $5.80 Fits Regulator Filter Manual moisture bowl drain Norgren REPAIR PARTS FOR ONLY Regulator Diaphragm $17.60 Assembly Only Regulator Service Kit $40.20 WATER FILTER BOWL ASSEMBLY $24.40 O-Ring Pkg. of V-00 $5.80 REGULATORS & FILTERS AIR FILTER / REGULATOR $ MOISTURE SEPARATOR Air pressure regulator and filter combination Manually Drained 5 micron filter element Includes gauge (0-160 PSI) 1/4 poly supply fittings, mounting bracket and hardware Assembly is completely assembled as shown A-DEC cross ref. # FILTER ELEMENT $16.50 Fits Regulator Filter Fits Water Filter Regulator Assembly Fits Water Filter Assembly Fits Auto Drain Air Filter Assembly micron filtration Norgren REGULATOR MOUNTING BRACKET KIT $20.00 Fits Water Filter and Water Filter Regulator Assembly Norgren AIR OR WATER REGULATOR ASSEMBLY $70.90 Non-relieving 2-60 PSI out port adjustability 1/8 pipe ports (4) Brass body construction Adjustment knob with lock Watts WATTS REGULATOR REPAIR KIT $41.90 Repairs Watts regulators Non-relieving type Fits regulator REGULATORS & FILTERS Hardware for mounting regulator Fits , , & Regulators WATTS REGULATOR REPAIR KIT $43.00 Repairs Watts Regulators Relieving type Used for rebuilding MIDWEST 210 Unit Foot Control MIDWEST Cross ref. #

77 FILTER REGULATOR BOWL ASSEMBLY $62.10 REGULATOR DIAPHRAGM ASSEMBLY $26.00 Fits obsolete filter-regulator combo and obsolete air water regulator Brass and rubber construction Wilkerson Filter Element Only $15.30 O-Ring Pkg. of V-00 $5.80 ADEC Replacement bowl with seal for ADEC manual moisture separator. Bowl with seal cross ref. # Also fits obsolete filter assembly and obsolete Filter-Regulator Combo Clear plastic construction with manual bottom drain and O-ring Wilkerson REGULATOR POPPET AND SPRING $29.80 Fits obsolete filter-regulator combo and obsolete air-water regulator Poppet is constructed from brass with stainless steel spring Wilkerson FILTER ELEMENT KIT $ micron filtration Replacement filter for Air Filter Assembly and obsolete Air Filter Regulator With O-ring for resealing bowl Wilkerson Bowls for obsolete Air Filter Regulator ; use Part number or AIR FILTER ASSEMBLY $81.70 Filter Element Kit Only $55.30 (2) 1/8 female pipe ports 5 micron filtration Manual moisture drain Wilkerson REGULATORS & FILTERS AIR FILTER BOWL ASSEMBLY $55.30 Fits Air Filter Assembly Clear plastic construction with manual bottom drain and O-ring Wilkerson INLINE FILTER ASSEMBLY 1/8 FPT Port $ Port $22.60 Replacement O-Ring Only Pkg. of V-00 $5.80 For air or water filtration Brass construction 35 micron filter disc 1 diameter X 1 long FILTER DISC $ micron filtration Replacement filter disc for & filter assembly REGULATORS & FILTERS 150 AIR FILTER MOUNTING BRACKET $27.60 For mounting air filter assembly Includes mounting screws INLINE QUICK DISCONNECT $15.10 Commonly used on PROPHY-JET installations so air and water lines can never cross 1/16 barb X female Inline type quick disconnect Can be panel mounted Included (2) 5/8 dia. stainless steel washers for mounting through oversized holes Brass construction Conventional valve core shut-off 151

78 INLINE QUICK DISCONNECT $15.10 Same as with 1/8 barb X female QUICK DISCONNECT 1/4 OD Male X 1/4 Poly $7.90 3/8 OD Male X 3/8 Poly $9.80 Without shut-off FITTINGS 152 QUICK COUPLER ASSEMBLY $65.90 Female Male Female Coupler only $35.70 with shut-off Male Coupler only $33.00 with shut-off Commonly used on DENTSPLY CAVI-JET, so the air supply line can never mistakenly be plugged into water Quick coupler for air or water Female & male Quick Couplers both have shut-off (2) 1/8 FPT in and out ports Brass construction Not for natural gas DENTSPLY cross ref. # The assembly from DENTSPLY includes fitting on both ends and is plated. Chapman-Huffman s are sold less the fittings and are not plated. PANEL MOUNT FEMALE QD CPC TYPE $46.80 WITH SHUT-OFF For air or water 1/4 Female Coupler with shut-off Panel mounts Ferruless polytube fitting Recommended tubing size 1/4 OD x.170 ID semirigid polyethylene, nylon, polyurethane etc. tubing DCI cross ref. # 0004 MALE QUICK DISCONNECT CPC TYPE $17.40 WITHOUT SHUT-OFF For air or water (note however this QD does NOT incorporate a shut-off) Male Coupler without shut-off In-line Ferruless polytube fitting Recommended tubing size 1/4 OD x.170 ID semirigid polyethylene, nylon, polyurethane etc. tubing DCI cross ref. # 0005 MALE QUICK DISCONNECT CPC TYPE $32.00 WITH SHUT-OFF For air or water Male Coupler with shut-off In-line Ferruless polytube fitting Recommended tubing size 1/4 OD x.170 ID semirigid polyethylene, nylon, polyurethane etc. tubing QUICK DISCONNECT QUICK DISCONNECT QUICK DISCONNECT 1/4 OD Male X 1/4 Poly $ /8 OD Male X 3/8 Poly $18.80 With shut-off 1/4 ID Female X 1/4 Poly $ /8 ID Female X 3/8 Poly $21.30 With shut-off 1/4 ID Female X 1/8 MPT $7.50 1/4 ID Female X 1/4 MPT $8.20 3/8 ID Female X 1/4 MPT $10.40 With shut-off BULKHEAD FEMALE QUICK-CONNECT $18.30 W/ SHUT-OFF Used for panel mounting panel up to 1/4 thick inlet threads X 1/4 ID female quick disconnect with shut-off Mounting nut Stainless steel & plated brass construction QUICK DISCONNECT BARB REDUCER 1/16 Barb X 1/4 Copper $4.90 Compression 1/16 Barb X 3/8 Copper $4.90 Compression 1/8 Barb X 3/8 Copper $4.90 Compression Commonly used on quick disconnect when installing DENTSPLY CAVI-JET and CAVITRON These fittings will allow a 1/8 or 1/4 OD tubing to be adapted to a 1/4 or 3/8 quick disconnect Will adapt to any 1/4 or 3/8 copper compression fitting Nickel plated finish 153 FITTINGS

79 QUICK CONNECTOR 1/ $21.50 Fits 1/8 OD X 1/16 ID tubing Nickel plated ADEC cross ref. # Pkg. of 5 VACUUM ADAPTER INSTALLATION TOOL $9.10 Used for the installation of vacuum adapter Zinc plated steel QUICK CONNECTOR 1/ $21.50 Fits 1/4 OD X 1/8 ID tubing Nickel plated ADEC cross ref. # Pkg. of 5 RECESSED WATER QUICK DISCONNECT $26.30 WITH SHUT-OFF Recessed to facilitate proper connection to ADEC s female quick disconnect RUBBER GARDEN HOSE WASHER $4.00 Fits 3/4 garden hose threaded nut Rubber Pkg. of 10 TEFLON TAPE $4.40 For sealing pipe threads 1/2 wide X 520 long (approx. 43 ft. long) White Teflon Pop out covered spool ADAPTER CONNECTOR $4.10 RECESSED AREA 1/8 MPT X 3/8 OD Copper Compression Brass construction MALE GARDEN HOSE TO MALE PIPE 3/4 X 3/8 Brass $5.40 3/4 X 1/2 Brass $7.30 3/4 X 3/4 Brass $6.00 3/4 X 3/4 White Nylon $3.10 ADAPTER CONNECTOR $7.10 1/8 MPT X 8-32 X 3/8 OD Copper Compression Brass construction Garden hose thread X MPT MALE GARDEN HOSE TO MALE / FEMALE PIPE 3/4 X 3/4 X 1/ $7.70 3/4 garden hose thread X 3/4 MPT X 1/2 FPT Brass construction ADAPTER CONNECTOR $8.20 1/2 MPT X 3/8 OD Copper Compression Brass construction FITTINGS VACUUM ADAPTER $13.70 Commonly used on vacuum pumps 3/4 MPT X 1 dia. straight vacuum adapter with installation notch Brass construction CLOSE NIPPLE 1/8 MPT $1.00 1/4 MPT $1.50 3/8 MPT $1.80 1/2 MPT $3.00 3/4 MPT $12.10 FITTINGS 154 Brass construction 155

80 HEX NIPPLE 1/8 MPT $1.30 1/4 MPT $1.80 3/8 MPT $2.10 Brass construction hex nipple STREET TEE 1/8 MPT/FPT $4.40 1/4 MPT/FPT $5.50 Brass construction MPT REDUCING NIPPLE 1/4 MPT X 1/8 MPT $1.80 3/8 MPT X 1/4 MPT $3.70 Brass construction 90 ELBOW FEMALE 1/8 FPT $3.90 1/4 FPT $5.50 3/8 FPT $5.50 1/2 FPT $14.00 MALE PIPE LONG NIPPLE 1/8 MPT X 1 1/ $1.80 1/4 MPT X 1 1/ $2.00 3/8 MPT X 1 1/ $2.90 1/2 MPT X $5.50 3/4 MPT X 4 1/ $21.70 Brass construction 90 STREET ELBOW Brass construction 1/8 FPT X 1/8 MPT $2.00 1/4 FPT X 1/4 MPT $3.10 3/8 FPT X 3/8 MPT $7.80 1/2 FPT X 1/2 MPT $8.20 COUPLING CROSS 1/8 FPT $1.60 1/4 FPT $2.50 3/8 FPT $3.60 1/2 FPT $7.60 Brass construction 1/8 FPT $8.10 1/4 FPT $8.00 MPT X FPT BUSHING Brass construction 1/4 X 1/ $1.20 3/8 X 1/ $1.80 3/8 X 1/ $1.90 1/2 X 1/ $3.70 1/2 X 1/ $2.90 1/2 X 3/ $3.60 3/4 X 1/ $5.00 3/4 x 3/ $4.40 3/4 x 1/ $4.40 Brass construction Brass construction FITTINGS FEMALE PIPE TEE 1/8 FPT $3.90 1/4 FPT $6.60 3/8 FPT $7.70 1/2 FPT $11.50 HEX PLUG 1/8 MPT $1.10 1/4 MPT $1.30 3/8 MPT $2.60 FITTINGS Brass construction Brass construction

81 MALE PIPE SOCKET HEAD PLUG 1/8 MPT $1.00 1/4 MPT $1.80 3/8 MPT $1.80 1/2 MPT $2.10 ADAPTER CONNECTOR $5.40 1/8 FPT X male Nickel plated, Brass construction PIPE CAP Brass construction 1/8 FPT $1.70 1/4 FPT $2.80 3/8 FPT $2.80 1/2 FPT $14.70 Brass construction ADAPTER $3.10 Brass construction 1/8 MPT X 1/4 FPT ADAPTER CONNECTOR $6.00 1/8 MPT X 1/4 barb For saliva ejector tubing ADAPTER CONNECTOR $6.60 3/8 copper compression X 1/8 FPT Chrome plated brass to match chrome plating on quick disconnects Commonly used on installation of quick disconnects for air abrasion units POLY FITTING $4.70 1/4 Poly X 3/8 copper compression ADAPTER CONNECTOR $3.60 Brass construction 1/8 MPT X female POLY FITTING $6.60 3/8 poly X 3/8 copper compression ADAPTER CONNECTOR $4.10 Brass construction 1/8 MPT X male POLY UNION 1/4 X 1/ $2.60 5/16 X 5/ $5.50 3/8 X 3/ $3.50 FITTINGS ADAPTER CONNECTOR $5.00 Brass construction 1/8 MPT X Tee POLY CONNECTOR 1/4 Poly X $5.20 Male Connector FITTINGS Includes washer

82 POLY FITTING 1/4 Poly X 1/8 MPT $1.90 1/4 Poly X 1/4 MPT $2.80 5/16 Poly X 1/8 MPT $2.80 5/16 Poly X 1/4 MPT $3.70 POLY NUT BY FPT UNION 1/4 Poly X 1/8 FPT $2.10 1/4 Poly X 1/4 FPT $4.90 5/16 Poly X 1/8 FPT $5.80 3/8 Poly X 1/4 FPT $5.30 3/8 Poly X 1/8 MPT $2.80 3/8 Poly X 1/4 MPT $2.90 3/8 Poly X 3/8 MPT $5.50 POLY REDUCING UNION 3/8 Poly X 1/4 Poly $5.40 POLY FITTING 1/4 Poly Tee $5.40 5/16 Poly Tee $8.60 3/8 Poly Tee $10.20 BULKHEAD UNION 1/4 X 1/ $9.90 3/8 X 3/ $13.10 Brass construction POLY MALE RUN TEE MALE ELBOW 1/4 X 1/8 MPT $6.90 1/4 X 1/4 MPT $7.70 1/4 Poly X 1/8 MPT $4.00 1/4 Poly X 1/4 MPT $4.10 5/16 Poly X 1/8 MPT $4.70 3/8 Poly X 1/8 MPT $4.80 3/8 Poly X 1/4 MPT $4.80 POLY NUT 1/4 Poly nut w/plastic sleeve $4.70 5/16 Poly nut w/plastic sleeve $ /8 Poly nut w/plastic sleeve $4.70 1/4 Poly nut w/metal sleeve $8.00 3/8 Poly nut w/metal sleeve $8.00 Pkg. of 5 NOTE! Metal sleeve nuts are recommended when using Poly-Flo type tubing & for a better sleeve tubing bite. FITTINGS LONG MALE ELBOW $18.40 Commonly used for water supply to vacuum pump Impeller Housing 1/4 Poly X 1/4 MPT extra long male elbow If using on Vacuum Pump using /4 Poly-Flo type tubing it is recommended to replace the 1/4 Poly Nut with /4 Poly Nut with metal sleeve (Pkg. of 5) Brass construction POLY SLEEVE 1/4 Poly Sleeve $2.70 5/16 Poly Sleeve $2.70 3/8 Poly Sleeve $2.70 Pkg. of 10 FITTINGS

83 POLY PLUG Pkg. of 5 1/4 Poly Plug $3.60 5/16 Poly Plug $8.10 3/8 Poly Plug $3.60 COMPRESSION NUT 1/ $4.80 1/ $4.40 5/ $7.00 3/ $4.80 1/ $ / $15.90 TUBE TO MALE PIPE CONNECTOR COMPRESSION TUBE TO PIPE ELBOW 1/4 X 1/8 MPT $1.70 1/4 X 1/4 MPT $2.10 3/8 X 1/8 MPT $2.40 3/8 X 1/4 MPT $2.70 3/8 X 3/8 MPT $3.60 3/8 X 1/2 MPT $ /2 X 1/4 MPT $5.50 5/8 X 1/2 MPT $7.70 Brass construction 1/4 X 1/8 MPT $4.00 1/4 X 1/4 MPT $4.20 3/8 X 1/8 MPT $5.30 3/8 X 1/4 MPT $6.30 1/2 X 1/4 MPT $7.30 5/8 X 1/2 MPT $10.90 SLEEVE COMPRESSION Brass construction Pkg. of 10 1/ $2.40 1/ $3.40 5/ $2.80 3/ $4.00 1/ $5.90 5/ $8.00 Brass construction Pkg. of 10 3/8 COMPRESSION CAP AND SLEEVE KIT $4.80 Plugs 3/8 outlet on manual shut-off valves (angle stops) for Chapman-Huffman part numbers , and UNION TEE COMPRESSION Brass construction 1/ $6.00 3/ $7.30 1/ $ / $19.60 MINIATURE FLOW RESTRICTOR $4.90 For air or water flow control, ideal for handpiece drive air adjustment Fits 1/4 or 1/8 tubing to restrict flow Brass construction, Nickel plated FITTINGS COMPRESSION UNION Brass construction 1/ $2.30 3/ $3.10 1/ $7.10 5/ $9.30 SYRINGE FLOW RESTRICTOR $9.10 Adapts to standard and asepsis syringe 2-hole tubing for flow adjustment Brass construction, Nickel plated FITTINGS 162 Brass construction 163

84 10-32 FEMALE CROSS $2.00 Brass construction, Nickel plated BARB ELBOW PLASTIC Pkg of X 1/ $ X 1/ $ FEMALE TEE $1.80 Brass construction, Nickel plated BARB TEE PLASTIC Pkg of 10 1/ $ / $ /16 BARB TEE METAL $4.70 ADJUSTABLE TEE ASSEMBLY $5.80 Adjustable tee assembly with 360 body rotation Ports (1) male in, (2) female out Brass and stainless steel construction Brass construction Nickel plated 1/8 X 1/16 X 1/8 BARB TEE PLASTIC $14.00 Pkg of FEMALE CONNECTOR $7.00 Pkg. of 5 BARB CONNECTOR $11.90 Brass construction 1/16 X 1/8 barb Pkg. of 10 BARB CROSS CONNECTOR - PLASTIC NEW! 1/16 Barbs $2.00 1/8 Barbs $2.00 White nylon construction UNIVERSAL TEE $ /8 barb X female port X 1/8 barb Brass construction, Nickel plated Pkg. of 5 FITTINGS 164 1/16 X 1/8 NYLON BARB CONNECTOR $9.90 Pkg of 10 1/16 BARB Y PLASTIC $13.50 Pkg of 10 1/8 X 1/16 X 1/8 TEE ASSEMBLY $5.20 SLEEVE CLAMP Brass construction Nickel plated 1/8 ID - Pkg. of $1.90 1/4 ID - Pkg. of $2.40 1/8 ID - Pkg. of $ /4 ID - Pkg. of $ FITTINGS

85 UNI-CLAMP $3.10 Fits 1/8 OD tubing Adjustable taper Pkg. of 10 CONNECTORS 1/16 Barb Connector $5.60 1/8 Barb Connector $9.10 Pkg. of 10 1/8 ID METAL SLEEVE CLAMP $17.10 Fits 1/8 OD tubing Smaller OD than plastic sleeve clamp Used on Chapman-Huffman , & Series syringes, also on ADEC syringes Nickel plated Pkg. of 10 PLASTIC WASHER $3.90 Used with fittings Pkg. of FEMALE X 1/8 BARB $8.60 1/8 barb X female-plated Pkg. of 10 TUBING PLUG $5.00 1/8 barb plug-plated Pkg. of 10 TUBING PLUG $5.00 1/16 barb plug-plated Pkg. of HEX PLUG PLATED NEW! Pkg. of $4.80 Pkg. of $ X 1/16 BARB ELBOW $ x 1/16 barb elbow plated Plated brass construction for strength Compact design for use in small spaces Pkg. of MALE COUPLER PLATED $5.70 ADEC STYLE X 1/16 BARB X 1/16 BARB PLATED Pkg. of 5 Pkg. of $5.70 Pkg. of $ x 1/16 barb plated Pkg. of $10.40 ADEC cross ref. # Pkg. of $94.40 ADEC cross ref. # BARB FITTING $19.10 FITTINGS X 1/8 BARB PLATED Pkg. of $4.90 Pkg. of $41.60 BARB FITTING $ X 1/8 X 1/16 barb Brass construction, Nickel plated x 5/16 barb Brass construction Requires washer (pkg. of 100) ADEC cross ref. # Pkg. of 10 SLEEVE CLAMP $ /16 ID ADEC cross ref. # Pkg. of 10 FITTINGS

86 BARBED Y FITTING $7.30 Used in DENTSPLY products for air into solenoids DENTSPLY cross ref. # VACUUM Y FITTING 1/2 X 1/2 X 1/ $6.90 Plastic construction 90 BARBED ELBOW $6.10 CONNECTOR VACUUM COUPLING VACUUM BARB COUPLING Used on DENTSPLY CAVITRON solenoid valves 1/16 barb X 1/8 MPT Plated Brass construction DENTSPLY cross ref. # /8 MPT X 1/16 Barb $2.10 1/8 MPT X 1/8 Barb $2.10 Brass construction 1/2 X 1/2 Barb $2.10 1/2 X 5/8 Barb $2.10 5/8 X 5/8 Barb $2.10 3/4 X 3/4 Barb $2.70 Plastic construction 1/2 X X X 1/2 Barb $7.60 5/8 X X X 5/8 Barb $7.60 Plastic construction VACUUM ELBOW BARB ADAPTER 1/2 MPT X 1/2 Barb $2.50 1/2 MPT X 5/8 Barb $2.50 1/2 MPT X 3/4 Barb $2.90 3/4 MPT X 1/2 Barb $2.90 3/4 MPT X 5/8 Barb $2.90 3/4 MPT X 3/4 Barb $3.40 3/4 MPT X 1 Barb $ MPT X 1 Barb $3.50 Plastic construction VACUUM ELBOW BARB ADAPTER FEMALE 1/2 FPT X 1/2 Barb $2.90 1/2 FPT X 5/8 Barb $3.50 Female pipe threads Plastic construction VACUUM COUPLING 1/2 X 7/ $8.40 VACUUM BARB ELBOW 1/2 X 1/2 Barb $2.50 5/8 X 7/ $8.40 5/8 X 5/8 Barb $2.50 Plastic construction Plastic construction FITTINGS 168 VACUUM MALE ADAPTER 1/2 MPT X 1/2 Barb $2.10 1/2 MPT X 5/8 Barb $2.10 1/2 MPT X 3/4 Barb $2.40 3/4 MPT X 1/2 Barb $2.40 3/4 MPT X 5/8 Barb $2.50 3/4 MPT X 3/4 Barb $2.70 3/4 MPT X 1 Barb $ MPT X 1 Barb $2.90 Plastic construction VACUUM BARB TEE 1/2 X 1/2 X 1/2 Barb $2.50 5/8 X 1/2 X 5/8 Barb $2.70 5/8 X 5/8 X 5/8 Barb $2.70 3/4 X 3/4 X 3/4 Barb $2.70 Plastic construction 169 FITTINGS

87 VALVES JUNCTION BOX ENCLOSURE $ long X 9 wide X 4 1/2 high Stainless steel construction Removable plastic cover Installation hole plug and screw kit STRAIGHT MANUAL SHUT-OFF VALVE $18.30 Straight manual shut-off valve For air or water 1/2 FPT X 3/8 compression VALVES 3/8 COMPRESSION CAP AND SLEEVE KIT $4.80 ZIP-IT WALL ANCHOR - NYLON Each $1.10 Bag of $29.90 Self-drilling sheetrock hollow wall anchor Fast, easy installation w/ electric drill or screwdriver Use # 8 X 1 1/4 sheet metal screws ( Pkg. of 25 or Pkg. of 50) Electrically non-conductive ZINC ZIP-IT WALL ANCHOR - METAL Each $1.30 Bag of $35.20 Self-drilling sheetrock hollow wall anchor Fast, easy installation w/ electric drill or screwdriver Use # 8 X 1 1/4 sheet metal screws ( Pkg. of 25 or Pkg. of 50) Made of Zamac alloy JUNCTION BOX SERVICE VALVE KIT $29.00 WITH ADAPTER Two manual shut-off valves 1/2 FPT X 3/8 compression Two adapter fittings 1/8 MPT X 3/8 compression For air or water Plugs 3/8 outlet on manual shut-off valves (angle stops) for Chapman-Huffman part numbers , and JUNCTION BOX VALVE KIT $ For custom installation Air and water shut-off valves with filter Pre-regulators Gauges Master on-off toggle valve Tubing Mounting holes in bracket align with holes in junction box enclosure on pg. 170 Installation instructions JUNCTION BOX VALVE KIT $ For custom installation Air and water shut-off valves with filter element housing Tubing and fittings Master on-off toggle valve Can be used as on-off or used with pre-regulator JUNCTION BOX SHUT-OFF VALVE ASSEMBLY $69.10 MANUAL SHUT-OFF VALVE ONLY $ /2 FPT x 3/8 compression For air or water Includes filter element housing Can be used as on-off or used with pre-regulator 3/8 compression inlet plus (1) port Outlet (1) 1/8 FPT port plus (4) ports MANUAL SHUT-OFF VALVE COMPRESSION $ /8 OD compression (in) x 3/8 compression (out) For air or water Note: Compression nut & sleeve 170 FILTER ELEMENT AIR OR WATER $2.60 Pkg. of $13.20 Fits ADEC junction box valves and is an exact replacement for ADEC cross ref. # Also fits Chapman-Huffman Junction Box valve White plastic construction 171

88 VALVES JUNCTION BOX SHUT-OFF VALVE REPAIR KIT $12.90 Repairs junction box valves , and MASTER WATER SHUT-OFF VALVE ASSEMBLY $ Fits DENTAL-EZ TRUTH System for master water on-off control to units Brass construction (3) 1/8 FPT ports - (1) in, (1) out, (1) pilot air 1 1/8 diameter X 1 1/2 high VALVES UNIVERSAL JUNCTION BOX SHUT-OFF $61.60 VALVE ASSEMBLY MASTER AIR SHUT-OFF VALVE ASSEMBLY $88.00 Can be used as on-off or used with pre-regulator 3/8 compression inlet less filter plus (1) port, (1) 1/4 poly outlet, plus (1) port For air or water Fits DENTAL-EZ TRUTH System for master air on-off control to units Zinc plated steel construction (4) 1/8 FPT ports - (1) in, (1) out, (1) exhaust, (1) pilot air 1 1/8 diameter X 1 1/2 high CUSPIDOR / CUP FILLER TIME DELAY $91.20 VALVE ASSEMBLY NOTE! This valve will leak out exhaust port when main pressure IN is under 15 lbs With this valve assembly you can control the length of time water will run in the cuspidor bowl or from the cup filler valve and then shut-off automatically The fine time adjustment valve allows a wide range of time delay for your specific needs and can be remote mounted (1) 1/4 poly inlet, plus (1) port and 1/4 poly outlet, plus (1) port CENTURY WATER VALVE SERVICE KIT $22.70 Fits ADEC CENTURY Water Valve Assembly ADEC cross ref. # INLINE FILTER ASSEMBLY 1/8 FPT Port $ Port $22.60 Replacement O-Ring Only Pkg. of V-00 $5.80 For air or water filtration Brass construction 35 micron filter disc 1 diameter X 1 long NEEDLE VALVE STEM ASSEMBLY $10.00 Fits ADEC CENTURY Water Valve Assembly, Part Number: Black plastic construction with O-ring ADEC cross ref. # AIR OR WATER AUTO SHUT-OFF $52.20 VALVE REPAIR KIT Repairs DENTECH Shut-Off valves DENTECH cross ref. # FILTER DISC $ micron filtration Replacement filter disc for & filter assembly UNIVERSAL JUNCTION BOX VALVE REPAIR KIT $15.80 Fits obsolete junction box valves and HANDPIECE CONTROL BLOCK $26.10 REPAIR KIT Fits DENTECH Corporation Controls DENTECH cross ref. #

89 VALVES COOLANT BLOCK REPAIR KIT $26.10 Fits DENTECH Corporation Controls DENTECH cross ref. # DIAPHRAGM Pkg. of $8.70 Fits ADEC CENTURY PAC Control System ADEC cross ref. # VALVES DIAPHRAGM Pkg. of $5.00 DIAPHRAGM Pkg. of $27.10 Fits ADEC valves & Chapman-Huffman , & Junction Box Shut-off Valves ADEC cross ref. # Fits ADEC PERFORMER handpiece Control Block ADEC cross ref. # DIAPHRAGM Pkg. of $5.00 Fits ADEC CENTURY II control block ADEC cross ref. # TOP CAP DIAPHRAGM Pkg. of $7.50 DIAPHRAGM Pkg. of $5.00 Fits ADEC CENTURY PLUS Control Block Assembly ADEC cross ref. # Fits ADEC valves ADEC cross ref. # DIAPHRAGM Pkg. of $ HOLE GASKET 5 HOLE GASKET 5 HOLE GASKET Pkg. of $5.00 Fits ADEC valves & Chapman-Huffman , & Junction Box Shut-off Valves ADEC cross ref. # Pkg. of $5.00 Fits ADEC valves ADEC cross ref. # Pkg. of $5.00 Fits ADEC CENTURY PAC Control System ADEC cross ref. # DIAPHRAGM Pilot Air In Water Out Water In Fits ADEC Handpiece Control Valve ADEC cross ref. # Pkg. of $12.60 Fits Chapman-Huffman Junction Box Valve which is obsolete WATER RETRACTOR (WATER RELAY) $24.80 Use when retraction is desired in handpiece (3) ports Activated by air Check valve is recommended in conjuction with this valve Plated 175

90 VALVES NON-RETRACTING WATER RELAY $41.30 Water In Water Out Use when non-retraction is desired in handpiece (3) ports Activated by air Plated CHECK VALVE BARB FITTING $8.80 1/16 Barb x thread Duckbill style Plated VALVES Pilot Air In PILOT-ACTUATED RELAY VALVE $22.20 Requires actuator or (2) ports 2-way non-relieving Normally closed For air or water WATER RELAY W/ LOW PRESSURE $53.70 ACTUATOR Pilot Air In Water Out Water In Commonly used with electric handpieces Valve opens with approx. 4 to 6 PSI pilot air (2) Ports and (1) 1/8 FPT port (1) 1/8 MPT x 1/16 barb included Activated by air WATER RELAY WITHOUT FLOW CONTROL $51.20 ACTUATOR KIT $20.70 Air actuator with 1/16 barb fitting Replacement actuator for air pilot valve below & for pilot actuated relay valve Brass construction Pilot Air In Water Out Water In Non retracting water relay Low pressure activation of 5 PSI Nickel plated metal construction 6-32 mounting holes DCI cross ref. # 7131 COMBINATION RELAY AND NEEDLE $53.40 VALVE ASSEMBLY PINCH VALVE WATER RELAY $18.60 NEW! Installs on 1/8" OD polyurethane water tube Water flow opens when air signal applied 1/16" air signal barb fitting Non-retracting Pilot Air In Water Out Water In Two-in-one valve. Relay and Needle Valve for flow control Non-retracting relay Low pressure activation of 5 PSI Nickel plated metal construction Panel mounting hardware, 15/32-32 hex nuts PELTON & CRANE cross ref. #'s , 7132 or DCI cross ref. # 7130 AIR PILOT VALVE $49.30 Requires actuator kit above 2-way (non relieving) Normally Closed 1/8 FPT ports For air or water PSI rated Brass construction REPAIR KIT $10.30 LOW PRESSURE ACTUATOR KIT $34.70 Repairs Combination Relay and Needle Valve Assembly and Water Relay without Flow Control Activates valves such as (above), (above) at approx. 4 to 6 PSI pilot air Overall size: 1 diameter X 1 5/8 long Valve end (15/32-32 threads) Pilot air end (1/8 FPT) Brass and Aluminum construction

91 VALVES SELF-PIERCING SADDLE VALVE ASSEMBLY $17.40 No drilling or line shut-off required w/ copper tubing Accommodates copper tubing 3/8 through 1 OD Outlet is 1/4 OD copper compression TOGGLE VALVE: ON/OFF Black 2-way N/C w/o exhaust $15.20 Black 3-way N/C with exhaust $15.20 Gray 2-way N/C w/o exhaust $15.20 Gray 3-way N/C with exhaust $15.20 VALVES MINI BALL VALVE ASSEMBLY 1/8 FPT $ /4 FPT $ /8 FPT $ /2 FPT $19.20 For air/water service w/ working pressure to 300 PSI Pipe threaded ports Brass construction, Chrome plated All OK to use with oxygen and nitrous oxide Teflon seals MINI BALL VALVE ASSEMBLY $53.00 BALL VALVE ASSEMBLY Air or water max. operating pressure of 250 PSI 1/4 turn ball valve ON-OFF Brass construction Panel Mount up to 1/8 thick, 5/8 dia. hole required Plastic handle w/ flow directional arrow indicating position of valve 1/8 FPT ports Viton seals Not suitable for oxygen, steam nor nitrous oxide 1/4 FPT $ /8 FPT $ /2 FPT $28.70 For air or water service w/ working pressure to 600 PSI For vacuum service to 29 inches of mercury Pipe threaded ports Brass construction All OK to use with oxygen and nitrous oxide Teflon seals TOGGLE VALVE: ON/OFF (MOMENTARY) TOGGLE VALVE: ON-OFF (MOMENTARY) In Out Exhaust Positive on/off control Brass construction, Nickel plated (2) ports Mounting hardware, 15/32-32 hex nuts Black 2-way N/C w/o exhaust $15.20 Black 3-way N/C with exhaust $15.20 Gray 2-way N/C w/o exhaust $15.20 Gray 3-way N/C with exhaust $15.20 Positive on/off control Brass construction, Nickel plated (2) ports Mounting hardware, 15/32-32 hex nuts Black $19.60 Gray $ way with exhaust n/o Positive on-off control for air only Brass construction, Nickel plated (2) ports Mounting hardware, 15/32-32 hex nuts TOGGLE VALVE ASSEMBLY SUB-MINIATURE $86.70 Miniature Toggle Valve 3-Way N/C with exhaust Mounting hardware 1/4-40 hex nut 1/4 Mounting Hole Required - 1/8 maximum panel thickness Non-adjustable metal toggle (2) 1/16 barb fittings Nickel plated Max 100 PSI ADEC cross ref. #

92 VALVES 180 PUSH BUTTON: ON/OFF (MOMENTARY) PILOT AIR IN Black 2-way w/o exhaust N/C $20.10 Black 3-way with exhaust N/C $20.10 Black 3-way with exhaust N/O $20.10 Gray 2-way w/o exhaust N/C $20.10 Gray 3-way with exhaust N/C $20.10 Gray 3-way with exhaust N/O $20.10 Positive on/off control Brass construction, Nickel plated (2) ports Mounting hardware, 15/32-32 hex nuts ON-OFF CUP FILLER VALVE (MOMENTARY) $28.70 Black momentary N/C 2 way without exhaust Positive on-off control Brass construction, Nickel plated port Mounting hardware, 15/32-32 hex nuts Commonly used on ADEC cuspidor cup filler ADEC Cross ref. # DCI Cross ref. # 7167 ROUTING VALVE Black $19.40 Gray $ way routing, 1 input, 2 output, N/O Can also be used with (2) input and (1) output N/O Routing control for air or water Brass construction, Nickel plated (3) ports Mounting hardware, 15/32-32 hex nuts PUSH BUTTON ROUTING VALVE Gray Button $20.10 IN N/C 2-way momentary routing Valve is designed to be used when (2) input and (1) output is desired Supply to valve can be air or water, or one of each Brass construction, Nickel plated OUT N/O (3) ports IN N/O Mounting hardware, 15/32-32 hex nuts This valve will also function the same as routing valves and with (1) input and (2) outputs AIR ACTIVATED ROUTING VALVE $ way routing, (1) input and (2) output N/O Also, valve is designed to be used when (2) input and (1) output is desired Routing control for air or water Brass construction, Nickel plated (3) ports ON/OFF TOGGLE VALVE (MOMENTARY) Black $30.10 Gray $30.10 ON/OFF TOGGLE VALVE 2 way without Exhaust Momentary N/C Positive ON-OFF control Brass construction, Nickel plated (2) ports Mounting hardware, 15/32-32 hex nuts Commonly used on ADEC cuspidor cup filler Black 2-way W/O exhaust N/C $30.10 Black 3-way with exhaust N/C $30.10 Gray 2-way W/O exhaust N/C $30.10 Gray 3-way with exhaust N/C $30.10 Positive on-off control Brass Construction, Nickel plated (2) female thread ports Mounting hardware 15/32-32 hex nuts 2 way valves used on ADEC Cuspidor cup filler UNIVERSAL 31/64 BRACKET $2.50 For mounting toggle valves, needle valves and any other valve or switch requiring a 31/64 hole Zinc plated finish VALVE MOUNTING BRACKET SINGLE $10.30 For mounting valves or switches 1/2 diameter hole Clear anodized finish VALVE MOUNTING BRACKET DUAL $12.30 STANDARD TOGGLE MOMENTARY TOGGLE For mounting valves or switches 1/2 diameter holes Clear anodized finish Black $2.00 Gray $2.00 Fits Chapman-Huffman standard toggle valves Black $2.00 Gray $2.00 Fits Chapman-Huffman momentary toggle valves 181 VALVES

93 VALVES AIR PILOT VALVE ON/OFF PILOT AIR IN 2-way W/O exhaust N/C $ way With exhaust N/C $26.50 Positive air actuated on/off Panel mounting 15/32-32 (2) ports 1/16 barb for pilot air in Brass construction, Nickel plated PILOT VALVE ON/OFF $29.70 ALUMINUM KNOB ASSEMBLY $6.90 PLASTIC KNOB Replacement knob for control valves with 1/4 OD shaft Clear, anodized aluminum construction, easy cleaning design ENGLE DENTAL cross ref. # Black $2.60 Gray $2.60 VALVES AIR IN AIR OUT 3-way with Exhaust N/O Positive air actuated ON/OFF (2) ports 1/16 barb for pilot air in Brass construction, Nickel plated Replacement knob for control valves w/ 1/4 OD shaft ALUMINUM KNOB ASSEMBLY $7.60 PILOT AIR IN NEEDLE CONTROL VALVE FLOW RESTRICTOR VALVE (PINCH TYPE) Black $18.00 Gray $18.00 Variable control for air or water Brass construction, Nickel plated (2) ports Mounting hardware, 15/32-32 hex nuts Black $16.30 Gray $16.30 Variable restriction for air or water (pinch type) Accommodates tubing to 1/4 OD Brass construction, Nickel plated Mounting hardware, 15/32-32 hex nuts Replacement knob for control valves w/ 1/4 OD shaft Anodized aluminum construction, easy cleaning design ADEC cross ref. # MINI FLOW NEEDLE VALVE ASSEMBLY $29.30 Use with air Used on time delay valve Can be panel or manifold mounted male inlet, female outlet Plated brass and stainless steel construction ADEC cross ref. # NEEDLE VALVE PANEL MOUNT $42.80 Fits BELMONT 056/057/058 units Screwdriver slot in stem BELMONT cross ref. # FLOW RESTRICTOR VALVE $14.70 (1/8 OD PINCH TYPE) Variable restriction for air or water (pinch type) Designed to accommodate 1/8 OD tubing Brass construction, nickel plated Knob color - gray Mounting hardware, 15/32-32 hex nuts ON-OFF TOGGLE VALVE HOLDER BAR MOUNTED Gray $61.90 On-off toggle with miniature signal valve provides manual air signal to accessories or arm brake Aluminum mounting adapter for 1/2 dia. holder bar

94 VALVES NEEDLE VALVE ASSEMBLY ANGLE NEEDLE VALVE ASSEMBLY 1/4 X 1/ $ /8 X 1/ $31.80 Poly to MPT Flow adjustment with positive seal 150 PSI working pressure Brass construction 1/8 x 1/ $ /4 x 1/ $23.80 MPT to Poly Flow adjustment with positive seal 150 PSI working pressure Brass construction UNIVERSAL PILOT VALVE ASSEMBLY $11.80 Normally closed 3-way Replacement pilot valve for Water Toggle Tower Assemblies , and Replacement pilot valve for Scaler Tower Assemblies , and Fits On-Off Toggle Valve Holder Bar Mounted Also fits Automatic Handpiece Holders , , , and PILOT VALVE ASSEMBLY NORMALLY $11.80 OPEN 3-WAY Normally open 3-way VALVES ADJUSTABLE VACUUM RELIEF $69.20 VALVE ASSEMBLY Fits VACUDENT ESP Series vacuum pumps - cross ref. # Also fits other vacuum systems where an adjustable vacuum relief valve is needed Adjustable from 5 to 27 Hg. Steel and plastic construction, 3/8 MPT PILOT VALVE ASSEMBLY NORMALLY $20.10 CLOSED 2-WAY Fits Chapman-Huffman Foot Control Chip Blower Tower Assemblies Normally Closed 2-way SHUTTLE VALVE $15.10 Brass construction, Nickel plated 1/16 barb fittings AUTOMATIC HANDPIECE HOLDER VALVE - REAR PORTED N/C Rear Ported $11.50 N/O Rear Ported $12.60 Fits DCI asepsis molded automatic handpiece holders # 4561 and # 5987 DCI cross ref. #s 5983 N/C Rear Ported 5989 N/O Rear Ported Fits BELMONT automatic handpiece Holder #D4561, which uses N/C rear ported valve above Ball bearing corresponds with outgoing barb CHECK VALVE $10.20 May be installed in water coolant system of most handpiece controls to eliminate retraction, arrow showing direction of flow One piece, Elastomeric Duckbill Valve Nickel plated, Brass construction, with 1/16 barb fittings Flow rate,.4 liters per 50 PSI, Cracking pressure, 1 PSI Maximum back pressure, 87 PSI

95 VALVES 186 COMPACT PILOT VALVE ASSEMBLY (FOREST STYLE) - 3 WAY $13.30 FOREST Style handpiece holder valve Cross ref. # Normally closed 3-way $13.30 FOREST Style accessory holder valve Cross ref. # Normally open 3-way SINGLE BARB PILOT VALVE - N/O $12.10 Fits CHAPMAN-HUFFMAN INC # handpiece holder Normally open ADEC STYLE 2-WAY AIR BLEED $12.50 VALVE FOR EXCELLENCE HOLDER Fits EXCELLENCE holder Use for air bleed Snap fit for mounting 1/16 barb ADEC cross ref. # ADEC STYLE 2-WAY AIR BLEED $12.50 VALVE FOR CONTINENTAL WHIP HOLDER Fits CONTINENTAL WHIP holder Use for air bleed Snap fit for mounting 1/16 barb ADEC cross ref. # Also for EXCELLENCE cuspidor cup fill ADEC STYLE 2-WAY AIR BLEED $25.10 VALVE FOR CASCADE UNITIZED HOLDER MASTER ON-OFF INDICATOR Fits CASCADE UNITIZED holder Use for air bleed Snap fit for mounting to actuator 1/16 barb ADEC cross ref. # Red Indicator Black Bezel $16.50 Gray Bezel $16.50 Green Indicator Black Bezel $16.50 Gray Bezel $16.50 Shows color indicator when under pressure 1/16 barb connection Requires 1/2 hole for mounting MANUAL HANDPIECE CONTROL $47.90 BLOCK ASSEMBLY Manual unit individual handpiece pressure adjustment Shuttle valve signal ports Water on-off toggle valve signal port Tapped holes for mounting (6-32) DCI cross ref. # 4093 AUTOMATIC BLOCK ASSEMBLIES DRIVE AIR PRESSURE PILOT AIR (IN) WATER COOLANT DRIVE AIR AIR COOLANT ADJUSTMENTS AUTO BLOCK DIAPHRAGM SHOWN Automatic activation of 2, 3, 4 or 5 handpiece - depending upon size purchased Individual drive air adjustment Requires automatic handpiece holder for each handpiece operated Thin design for custom compact installation All blocks are 1 1/2 tall (including 1/2 tall adjustment stems) and 1 1/2 deep Brass construction, Nickel plated DRIVE AIR (IN) GAUGE AIR (OUT) COOLANT WATER (IN) COOLANT AIR (IN) POSITION LENGTH PART # 2 Position 1 5/ $ Position 2 1/ $ Position $ Position 3 3/ $ Fits 2 position Block $5.20 Fits 3 position Block $5.20 Fits 4 position Block $5.20 Fits 5 position Block $5.20 Replacement diaphragm for Auto Block Assemblies , , and CENTURY II STYLE CONTROL BLOCK $ ASSEMBLY ADEC CENTURY II style control block assembly ADEC cross ref. # VALVES

96 VALVES WATER VALVE COVER AND STEM ASSEMBLY Fits ADEC CENTURY II control blocks Stem w/ O-rings $3.00 ADEC cross ref. # CENTURY II TYPE TIE BOLT KIT Includes bolt, washer and nut For 3 blocks $11.50 adec cross ref. # VALVES Water Valve Cover $15.10 ADEC cross ref. # For 4 blocks $23.90 adec cross ref. # Diaphragm - Pkg. of $5.00 ADEC cross ref. # AIR BLEED RESTRICTOR BARB VALVE COVER KIT ADEC CENTURY II style valve cover kit Kit $20.20 adec cross ref. # Diaphragm - Pkg. of $5.00 adec cross ref. # Diameter (ADEC cross ref. # ) $ Diameter (ADEC cross ref. # ) $2.55 NEW! Threads Includes Washer Brass Material Pkg. of 1 CENTURY II STYLE CONTROL BLOCK $9.30 REPAIR KIT Kit includes diaphragms, gaskets, O-rings, stem spring and screws ADEC cross ref. # CENTURY PLUS STYLE CONTROL $ BLOCK ASSEMBLY Fits for ADEC CENTURY PLUS control block ADEC cross ref. # AIR AND WATER COOLANT STEM $9.30 DRIVE AIR FLOW ADJUSTMENT STEM $7.45 Stem with O-ring ADEC cross ref. # Extra O-rings Q-00 $5.80 Pkg. of 20 (ADEC cross ref. # , however ADEC s pkg. has 10 O-rings) Fits ADEC CENTURY PLUS control block assembly Includes O-ring ADEC cross ref. # ADJUSTMENT SCREW WITH O-RING $3.40 WATER COOLANT FLOW ADJUSTMENT STEM $7.90 Adjustment screw with O-ring ADEC cross ref. # Extra O-rings Q-00 $5.80 Pkg. of 20 Fits ADEC CENTURY PLUS control block assembly Includes O-ring ADEC cross ref. # (ADEC cross ref. # , however ADEC s pkg. has 10 O-rings) 189

97 VALVES CONTROL BLOCK SERVICE KIT $ Fits ADEC CENTURY PLUS Style control block assembly Includes O-ring ADEC cross ref. # SCALER BLOCK GASKET - RED $21.90 Fits ADEC CENTURY PLUS Scaler block assembly ADEC cross ref. # Package of 5 CONTROL BLOCK GASKET - CLEAR $9.00 AUTOMATIC HANDPIECE HOLDER ASEPSIS AUTOMATIC HANDPIECE HOLDER Black $42.00 Gray $42.00 Holder assembly with miniature valve and actuator, provides air signal to automatic control block for holdback when handpiece is placed into the holder. Miniature signal valve and actuator On/off lockout toggle with red indicator Non-marring, plastic holder Painted Aluminum mounting adapter for 1/2 diameter holder bar Black $48.30 Gray $48.30 HOLDERS Fits ADEC CENTURY PLUS control block assembly ADEC cross ref. # Package of 10 CARTRIDGE, AIR BLEED $14.50 On/off lockout lever mounted on side of assembly for easier cleaning Miniature signal valve and actuator for activation of automatic block assembly Non-marring, plastic holder Painted Aluminum mounting adapter for 1/2 diameter holder bar ADEC CENTURY PLUS Style cartridge - Brass Base ADEC cross ref. # ASEPSIS AUTOMATIC HANDPIECE HOLDER WITHOUT LOCKOUT Gray $46.20 CARTRIDGE, CHECK VALVE W/ DUCKBILL $15.70 ADEC CENTURY PLUS Style cartridge - Blue Base ADEC cross ref. # CARTRIDGE, WATER VALVE ASSEMBLY $29.50 Designed for easier cleaning Holder assembly with normally closed pilot valve and actuator, provides air signal to automatic control block for holdback when handpiece is placed into the holder Non-marring plastic holder Painted aluminum mounting adapter for 1/2 diameter holder bar ADEC CENTURY PLUS Style cartridge - Red Base ADEC cross ref. # AUTOMATIC HANDPIECE ASEPSIS HOLDER $66.90 ADEC STYLE CONTROL BLOCK $28.90 ADJUSTMENT KEYS For use in CASCADE and DECADE 4400 handpiece controls Autoclavable ADEC cross ref. # Pkg. of 5 Asepsis style Holder assembly with miniature valve and actuator, provides air signal to automatic control block for holdback when handpiece is placed into the holder Miniature signal valve and actuator without lockout Fits 1/2 diameter straight holder bar with open end and no bend only White plastic

98 ASEPSIS AUTOMATIC HANDPIECE HOLDER White $31.40 Gray $31.40 ASEPSIS Design smooth and seamless Provides air signal to automatic block Open book design fits all 1/2 diameter holder bars Molded nylon stain resistant AUTOMATIC HANDPIECE HOLDER ASEPSIS $47.80 SINGLE LINE BLEED ELECTRIC AUTOMATIC VACUUM HOLDER ASSEMBLY Black $51.00 Gray $51.00 Holder assembly incorporates low voltage switch for direct activation of an electrical device while it s handpiece is out of the holder Normally closed, this holder assembly, for example, will turn on central vacuum pump when vacuum handpiece is removed from holder Holder holds vacuum HP at swivel adapter Not to exceed 24 VAC, 2 amp, 60 Hz Mounts to 1/2 round bar Includes 24 low voltage wire with wire nuts HOLDERS For ADEC CENTURY PLUS style control blocks Works in place of ADEC individual holder # This holder however is white plastic Fits 1/2 diameter straight holder bar with open end and no bend only Includes holder and single line bleed valve normally open with 1/8 OD x 31 long interconnect tubing ON-OFF TOGGLE VALVE HOLDER BAR MOUNTED Gray $61.90 On-off toggle with miniature signal valve provides manual air signal to accessories or arm brake Aluminum mounting adapter for 1/2 dia. holder bar HOLDERS ELECTRIC AUTOMATIC HANDPIECE $78.80 ASEPSIS HOLDER Holder assembly incorporates a normally closed low voltage switch for direct activation of an electrical device while its handpiece is out of the holder Not to exceed 24 VAC, 2 Amp, 60 Hz Includes 24 low voltage wire with wire nuts Fits 1/2 diameter straight holder bar with open end and no bend only White plastic UNIVERSAL HOLDER Black $18.00 Gray $18.00 Holder assembly for use with handpiece, syringe, saliva ejector or universal central vacuum valve Non-marring, plastic holder Aluminum mounting adapter for 1/2 dia. holder bar UNIVERSAL ASEPSIS HOLDER $ ELECTRIC AUTOMATIC HOLDER ASSEMBLY Black $55.80 Gray $55.80 Holder assembly incorporates low voltage switch for direct activation of an electrical device while it s handpiece is out of the holder Normally closed, this holder assembly, for example, will turn on central vacuum pump when vacuum handpiece w/ extension tip is removed from holder On/off lockout toggle with red indicator Not to exceed 24 VAC, 2 amp, 60 Hz Mounts to 1/2 round bar Includes 24 low voltage wire with wire nuts UNIVERSAL ASEPSIS HOLDER Asepsis style Holder assembly for use with handpiece, syringe, saliva ejector or universal central vacuum valve Fits 1/2 dia. straight holder bar with open end and no bend only White plastic White $17.00 Gray $17.00 ASEPSIS Design smooth and seamless For use with syringe, handpiece, saliva ejector, or universal vacuum lever valve Open book design fits all 1/2 diameter holder bars Molded nylon stain resistant 193

99 HOLDERS 194 VACUUM HANDPIECE HOLDER Black $18.00 Gray $18.00 Accepts standard vacuum handpieces Non-marring, plastic holder Aluminum mounting adapter for 1/2 dia. holder bar VACUUM HANDPIECE ASEPSIS HOLDER $38.20 Asepsis style Holder assembly for use with standard vacuum handpieces Fits 1/2 dia. straight holder bar with open end and no bend only White plastic UNIVERSAL SWING MOUNT TRIPLE HOLDER BAR - VERTICAL MOUNT 3 Universal Holders $ Universal and 1 HVE $ Holder bar accepts handpiece, syringe, saliva ejector, or universal central vacuum valves Swivel mount allows holder bar to pivot for easy access Mounting screws Color - White UNIVERSAL SWING MOUNT QUAD HOLDER BAR - VERTICAL MOUNT 4 Universal Holders $ Universal and 2 HVE $ Holder bar accepts handpiece, syringe, saliva ejector, or standard central vacuum valves Swivel mount allows holder bar to pivot for easy access Mounting screws Color - White UNIVERSAL SWING MOUNT TRIPLE HOLDER BAR - HORIZONTAL MOUNT 3 Universal Holders $ Universal and 1 HVE $ Holder bar accepts handpiece, syringe, saliva ejector, or standard central vacuum valves Swivel mount allows holder bar to pivot for easy access Mounting screws Color - White UNIVERSAL SWING MOUNT QUAD HOLDER BAR - HORIZONTAL MOUNT 4 Universal Holders $ Universal and 2 HVE $ Holder bar accepts handpiece, syringe, saliva ejector, or standard central vacuum valves Swivel mount allows holder bar to pivot for easy access Mounting screws Color - White ASSISTANT S SWING MOUNT HOLDER BAR $66.10 Fits universal extension arm and others that accept 1/2 diameter pin For use with automatic, universal, and vacuum handpiece holders with 1/2 diameter mounting Holder bar is 1/2 diameter X 7 1/4 long Swivel mount allows holder bar to pivot for easy access Color - White ASSISTANT S SWING MOUNT TRIPLE HOLDER BAR 3 Universal Holders $ Universal and 1 HVE $ Fits universal extension arm and others that accept 1/2 diameter pin Swivel mount allows holder bar to pivot for easy access Color - White ASSISTANT S SWING MOUNT QUAD HOLDER BAR 4 Universal Holders $ Universal and 2 HVE $ Fits universal extension arm and others that accept 1/2 diameter pin Swivel mount allows holder bar to pivot for easy access Color - White TRIPLE HOLDER BAR ASSEMBLY 3 Universal Holders $ Universal and 1 HVE $69.30 Holder bar accepts handpiece, syringe, saliva ejector, or universal central vacuum valves Color - White QUAD HOLDER BAR ASSEMBLY 4 Universal Holders $ Universal and 2 HVE $76.30 Holder bar accepts handpiece, syringe, saliva ejector, or universal central vacuum valves Color - White 195 HOLDERS

100 SWING MOUNT HOLDER BAR VERTICAL HORIZONTAL Vertical Surface Mount $ Horizontal Surface Mount $ For use with automatic, universal, and vacuum handpiece holders with 1/2 diameter mounting Swing mount for vertical or horizontal surfaces Holder bar is 1/2 diameter X 7 1/4 long Mounting Screws Color - White CAVITRON STYLE HANDPIECE $11.60 SLEEVE ASSEMBLY STANDARD HOLDER BRACKETS Using this sleeve on a CAVITRON handpiece will allow it to hang in universal holders or and others Dual $22.80 HOLDERS HOLDERS VACUUM STANDARD Vacuum Handpiece Holder Black $7.80 White $7.80 Gray $7.80 Standard Handpiece Holder Black $7.80 White $7.80 Gray $7.80 Plastic with mounting screw SPECIAL HOLDER BARS Triple $27.50 Quad $35.60 For use with standard holders Vertical surface mount Clear anodized satin finish Includes mounting screws Single 1 3/ $16.70 HOLDERS Dual 3 3/ $21.00 SYRINGE HOLDER Black $7.80 White $7.80 Gray $7.80 Triple $24.20 Quad 7 3/ $25.60 Universal $30.60 Universal 14 3/ $32.50 Plastic with mounting screw SYRINGE HOLDER WITH BRACKET Black $15.40 White $15.40 Gray $15.40 Black (Bracket only) $7.80 White (Bracket only) $7.80 Gray (Bracket only) $7.80 Plastic with mounting screw FLAT MOUNTING ADAPTER For use with automatic, universal, and vacuum handpiece holders Vertical surface mount 1/2 diameter Clear anodized finish Includes mounting screws Black $5.50 Gray $5.50 Fits on 1/8 or thinner flat plate Plastic construction OD fits universal holders

101 EXHAUST SEPARATOR ASSEMBLY $ For use with single vacuum pumps up to 1.5 HP Separates air/water discharged from a dental water injected vacuum pump Separates evacuated gases from liquids by means of gravity. Liquids exit separator in a controlled stream, eliminating hazardous waste splashing at drain location Enables contaminated air to be vented from vacuum pump location Elbow accepts 3/4 PVC pipe or 3/4 PVC Flex Pipe from Chapman-Huffman; part number Includes mounting hardware 5 Dia. x 15 High AIR GAP / P-TRAP ASSEMBLY $ For use with water injected vacuum pumps, to be used in conjunction with an exhaust separator 1 1/2 ABS slip connection to P-trap Air gap bridge assembly with 90 degree 3/4 FPT PVC elbow with 360 degree rotation of complete elbow assembly Includes (1) 3/4 MPT X 5/8 barb adapter UNIVERSAL CENTRAL VACUUM $ AUTOCLAVABLE LEVER VALVE KIT Two autoclavable central vacuum lever valves with 5 ASEPSI-FLEX tubing One autoclavable saliva ejector tip valve w/ 5 tubing Gray central vacuum canister with removable solids collector screen Three position holder bar w/ gray universal holders Mounting hardware UNIVERSAL CENTRAL VACUUM $ AUTOCLAVABLE LEVER VALVE KIT Same as , except with (1) HVE, (1) SE, (2) Holders and bar ASSISTANT'S INSTRUMENTATION $ HORIZONTAL LAYOUT VACUUM Mounts to any horizontal surface syringe w/ tubing PRIME SE lever valve PRIME Universal lever valve HVE and SE include 6 asepis tubing Syringe includes 7 asepis tubing Drain tubing solids collector w/ mtg brackets Triple Holder Bar STANDARD CENTRAL VACUUM $ AUTOCLAVABLE LEVER VALVE KIT VACUUM ASSISTANT'S INSTRUMENTATION $ VERTICAL LAYOUT Mounts to any vertical surface syringe w/ tubing PRIME SE lever valve PRIME Universal lever valve HVE and SE include 6 asepis tubing Syringe includes 7 asepis tubing Drain tubing solids collector w/ mtg brackets Triple Holder Bar Two autoclavable central vacuum lever valves with 5 ASEPSI-FLEX tubing One autoclavable saliva ejector tip valve with 5 tubing Gray central vacuum canister with removable solids collector screen Three position holder bar with (1) standard holder and (2) HVE holders Mounting hardware

102 MANUAL ON-OFF WATER POWERED $ SALIVA EJECTOR Air operated water On-Off valve with Venturi S.E. tip with tubing Check valve Toggle valve Drain Y-fitting Supply tubing Installation instructions MALE GARDEN HOSE TO MALE PIPE 3/4 x 1/2 Brass $7.30 3/4 x 3/4 Brass $6.00 3/4 x 3/4 White Nylon $3.10 Garden hose thread X MPT adapter VACUUM ADAPTER $13.70 WATER VENTURI ASSEMBLY $66.00 IN OUT Water powered Venturi used in /8 FPT both ends Saliva ejector vacuum tube (on side of assembly) fits 3/16 ID or 7/32 ID saliva ejector tubing Brass construction, Nickel plated Commonly used on vacuum pumps 3/4 MPT x 1 dia. straight vacuum adapter with installation notch Brass construction Installation tool sold below VACUUM ADAPTER INSTALLATION TOOL $9.10 Y-FITTING $18.90 Used for the installation of vacuum adapter Zinc plated steel VACUUM Y-fitting for drain lines Fits 5/8 ID vacuum tubing Smaller tube fits 3/8 OD Polyurethane tubing such as Brass construction, Nickel plated AIR/WATER SALIVA EJECTOR $ RUBBER GARDEN HOSE WASHER $4.00 Fits 3/4 garden hose threaded nut Rubber Pkg. of 10 VACUUM Air/Water operated Saliva Ejector Vacuum Venturi Assembly Installation kit with instructions Recommended input pressure: Air - 40 to 70 psi Water - 50 psi minimum STRAIGHT HOSE COUPLING ASSEMBLY $5.40 Commonly used in twin vacuum pumps Brass construction 3/4 barb X 3/4 female thread garden hose nut rubber garden hose washer not incl. AIR/WATER SALIVA EJECTOR KIT $ Air/Water Operated Saliva Ejector Vacuum Venturi Saliva Ejector with 5 of tubing with check valve Holder for Saliva Ejector tip 5 of drain tubing On/Off toggle valve Installation kit with instructions Recommended input pressure: Air - 40 to 70 psi Water - 50 psi minimum SWIVEL GARDEN HOSE CONNECTOR TO FPT 3/4 Female hose to 1/2 FPT $8.80 3/4 Female hose to 3/4 FPT $10.40 Swivel connector female hose to female pipe thread Brass construction rubber garden hose washer not incl

103 HOSE CLAMP ASSEMBLY $2.30 Adjustable from 1/2 to 1 1/4 1/2 wide Stainless steel construction GASKET $2.50 Fits Clear Bowls and Fits vacuum cuspidor and sink valves and Also fits DENTAL-EZ SIGNATURE Unit CUSPIDOR DRAIN VALVE $ Quiet operation Automatic drain for dental cuspidor Connects to central vacuum system Eliminates conventional plumbing drain Installation kit with instructions TRANNEL original LONG CLEAR BOWL $15.10 Fits cuspidor drain valve assembly and sink drain valve assembly Included on above assemblies beginning September 1997 DIAPHRAGM $10.80 VACUUM SINK DRAIN VALVE ASSEMBLY $ Quiet operation Automatic drain for standard or operatory sinks Connects to central vacuum system Eliminates conventional plumbing drain Installation kit with instructions TRANNEL original Fits vacuum cuspidor and sink valves and manufactured prior to Sept SCREEN $6.50 Fits vacuum cuspidor and sink valves and manufactured prior to Sept Also fits DENTAL-EZ SIGNATURE Unit VACUUM DIAPHRAGM $10.80 Fits molded vacuum cuspidor and sink valves and Incl. on above assemblies beginning Sept LONG SCREEN $9.00 CLEAR BOWL $15.80 Fits vacuum cuspidor and sink valves and manufactured prior to Sept Also fits DENTAL-EZ SIGNATURE Unit Fits cuspidor drain valve assembly and sink drain valve assembly Included on above assemblies beginning September

104 STRAINER FILTER ASSEMBLY $37.60 ANTI-SIPHON VACUUM BREAKER REPAIR KIT $34.40 Commonly used on DENTAL-EZ Vacuum pumps Strains incoming water supply Bronze construction (2) 1/8 FPT ports DENTAL-EZ cross ref. # LUBE All parts needed to rebuild or vacuum breakers ANTI-SIPHON VACUUM BREAKER REPAIR KIT $39.90 ADJUSTABLE VACUUM RELIEF $69.20 VALVE ASSEMBLY All parts needed to rebuild /2 FPT Vacuum Breaker SWING CHECK VALVE ASSEMBLY Fits VACUDENT ESP Series vacuum pumps - cross ref. # Also fits other vacuum systems where an adjustable vacuum relief valve is needed Adjustable from 5 to 27 Hg. Steel and plastic construction 3/8 MPT 1/2 X 1/2 FPT $ /4 X 3/4 FPT $ X 1 FPT $52.80 ANTI-SIPHON VACUUM BREAKER $ Fits MATRIX vacuum system cross ref. # (vacuum breaker only) Brass construction Note: You must use flow restrictor and other fittings from existing vacuum breaker 1/4 FPT ports Vacuum breaker can be installed horizontally or vertically Mount where spillage will not matter VACUUM ANTI-SIPHON VACUUM BREAKER Used in vacuum pump systems Flap with rubber seat Brass construction DENTAL-EZ cross ref. # (For 3/4 valve only) 1/4 FPT Ports $ /8 FPT Ports $ /2 FPT Ports $79.60 WATER FLOW CONTROL VALVE $ GPM FLOW DOLE type directional flow control 0.13 GPM flow This valve restricts the flow of water to a water injected vacuum pump impeller housing Commonly used on DENTAL-EZ 1 HP vacuum pumps when used with a water recirculater 3/8 FPT both ends DENTAL-EZ cross ref. # VACUUM Brass and plastic construction APOLLO cross ref. # PV V (for only) DENTSPLY cross ref. # (for only) Fits DOUBLE, JR., 80 and 84 series vacuum pumps WATER FLOW CONTROL VALVE $ GPM FLOW DOLE type directional flow control 0.19 GPM flow This valve restricts the flow of water to a water injected vacuum pump impeller housing 3/8 FPT both ends APOLLO DENTAL cross ref. # PV V

105 WATER FLOW CONTROL VALVE $ GPM FLOW VACUUM CANISTER SOLIDS SEPARATOR ASSEMBLY SIDE DRAIN PORT DOLE type directional flow control 0.25 GPM flow This valve restricts the flow of water to a water injected vacuum pump impeller housing Commonly used on DENTAL-EZ vacuum pumps when used with water recirculater, DENTAL-EZ cross ref. # /8 FPT both ends Black $40.20 Gray $40.20 Lid O-Ring Only $1.00 Used with central vacuum Removable screen Accepts (2) 1/2 ID vacuum valve tubing Accepts (1) saliva ejector tubing One 5/8 drain port WATER FLOW CONTROL VALVE 1/2 GPM Flow $ GPM Flow $95.90 VACUUM CANISTER SOLIDS SEPARATOR ASSEMBLY BOTTOM DRAIN PORT VACUUM DOLE type directional flow control This valve restricts the flow of water to a water injected vacuum pump impeller housing Commonly used on DENTAL-EZ vacuum pumps and others 3/8 FPT both ends DENTAL-EZ cross ref. # s 1/2 GPM GPM WATER FLOW CONTROL VALVE 3/8 MPT X 3/8 FPT 1/2 GPM Flow $ /8 MPT X 3/8 FPT 1 GPM Flow $95.90 DOLE type directional flow control This valve restricts the flow of water to a water injected vacuum pump impeller housing Commonly used on DENTAL-EZ vacuum pumps Cross ref. # same as earlier models except with 3/8 MPT on one end and 3/8 FPT on the other end 1/2 GPM # GPM # Black $47.20 Gray $47.20 Lid O-Ring Only $1.00 Mtg. Bracket - Black $20.30 Mtg. Bracket - Gray $20.30 Used with central vacuum Removable screen Accepts (2) 1/2 ID vacuum valve tubing Accepts (1) saliva ejector tubing One 5/8 drain port Mounting bracket TWIST LOCK LID WITH O-RING Black $8.20 Gray $8.20 Fits Vacuum Canister Solids Separator Assemblies / black and / gray Includes lid and O-ring installed VACUUM VACSTAR TYPE WATER SYSTEM $86.50 CONVERSION KIT 2 POST MOUNT KIT $14.00 Fits AIR-TECHNIQUES VAC STAR vacuum system Recommended to replace the N9 straight type vacuum breaker originally installed on system. Installation instructions Cross ref. # Mounts and Vacuum Canister Solids Separator assembly to 2 diameter post

106 TWIST LOCK LID CANISTER ASSEMBLY Black $33.60 Gray $33.60 DISPOSABLE COVERED VACUUM CANISTER SCREEN Each $2.00 Pkg. Of $ Replacement screen for and plastic canisters when covered screen assembly is desired 1 7/8 diameter screen Vertical Mounting Bracket - Gray $3.30 Vertical Mounting Bracket - Black $3.30 Horizontal Mounting Bracket - Gray $3.30 Horizontal Mounting Bracket - Black $ Post Mount for kit above $57.30 Each $2.00 Pkg. Of $ Replacement screen for , , and plastic canisters when covered screen assembly is desired 2 1/8 diameter screen VERTICAL MOUNTING BRACKET HORIZONTAL Lid O-Ring Only $1.00 Twist lock removable lid Removable clean-out basket Will accept two HVE tubings and one SE tubing One 1/2 drain port Adapter for attaching 5/8 drain tubing Plastic construction Mounting bracket and screws CUSPIDOR BOWL O-RING KITS ADEC Cross ref. # $2.60 ADEC Cross ref. # $3.50 Fits ADEC cuspidor bowls Pkg. of 6 MOUNTING BRACKET TWIST LOCK LID WITH O-RING Black $13.30 Gray $13.30 RUBBER PLUG $1.80 Plugs vacuum at swivel adapter on autoclavable vacuum handpiece and saliva ejector Plugs HVE and saliva ejector ports on vacuum canisters VACUUM Fits Twist Lock Lid Vacuum Canister Assembly black and gray Includes lid and O-Ring installed SOLID COLLECTOR COVER O-RING $1.00 Fits only DENTECH solids collector cover # Cross ref. # for O-ring only DENTECH # AUTOCLAVABLE DRY ORAL CUP $13.90 Autoclavable Fits all vacuum handpiece valves that accept 7/16 OD tip 4 1/8 Dia. X 4 High White plastic construction Uses liners sold below LINER FOR DRY ORAL CUP $ Pre-cut Used in Pkg of 1000 VACUUM 208 PELTON & CRANE DEBRIS CUP $3.00 COVER O-RING Fits PELTON & CRANE SPIRIT debris cup cover PELTON & CRANE cross ref. # INLINE VACUUM ON-OFF VALVE 1/2 Barbs $ /8 Barbs $25.20 On-off rotary control valve Enables easy removal of vacuum cannister lid without shutting down building s vacuum system Fits 1/2 ID or 5/8 ID vacuum tubing Black plastic 209

107 STAINLESS STEEL ASPIRATOR TIP $ $23.50 UNIVERSAL AUTOCLAVABLE VACUUM $43.30 LEVER VALVE Same as , $46.50 less swivel adapter The Green Tip helping save our landfills from plastic disposable aspirator tips Stainless steel construction Autoclavable 7/16 OD 6 and 4 lengths available PRIME STANDARD VACUUM LEVER VALVE With standard swivel $65.10 With tapered swivel $65.10 Finger tip lever control for on/off and flow control Quick disconnect anodized aluminum swivel adapter remains in tubing while valve body is autoclaved 360 swivel at tubing Fits 1/2 ID vacuum tubing Anodized aluminum body designed for repeated autoclaving Easy, no tools needed for assembly 275 F Valve accepts 7/16 OD tips VACUUM Accepts 7/16 OD tips Aluminum and SS construction Autoclavable at 275 F Fits 1/2 ID vacuum tubing such as , , or Valve with tapered swivel fits ADEC newer style holder with taper PRIME UNIVERSAL VACUUM LEVER VALVE With standard swivel $69.30 With tapered swivel $69.30 Accepts 7/16 OD tips Aluminum and SS construction Autoclavable at 275 F Fits 1/2 ID vacuum tubing such as , , or Valve with tapered swivel fits ADEC newer style holder with taper STANDARD AUTOCLAVABLE VACUUM LEVER VALVE Valve With Standard Swivel $40.70 Valve with Tapered Swivel $41.60 Valve Less Swivel Adapter $41.60 Standard Swivel Tapered Swivel Less Swivel Autoclavable valve (275 F) Finger tip lever control for on/off and flow control Swivel quick disconnect allows 360 degrees of tubing rotation Quick disconnect anodized aluminum swivel remains in tubing while valve body is autoclaved Fits 1/2 ID vacuum tubing (works best with 1/2 asepsis vacuum tubing such as , , and ) Valve with Tapered swivel fits ADEC newer style holder with taper Valve accepts 7/16 OD tips VACUUM AUTOCLAVABLE UNIVERSAL VACUUM LEVER VALVE Valve With Standard Swivel $41.10 Valve With Tapered Swivel $41.10 RIGHT ANGLE AUTOCLAVABLE VACUUM $80.00 LEVER VALVE (RA 360) Same as , $86.00 less swivel adapter 210 Standard Swivel Tapered Swivel Autoclavable one piece valve body (275 F) Finger tip lever control for on/off and flow control Swivel quick disconnect allows 360 degrees of tubing rotation Quick disconnect anodized aluminum swivel remains in tubing while valve body is autoclaved Fits 1/2 ID vacuum tubing (works best with 1/2 asepis vacuum tubing such as , , and ) Valve with Tapered swivel fits ADEC newer style holder with taper Valve accepts 7/16 OD tips Right angle (105 ) design Autoclavable 360 tip rotation Valve accepts 7/16 OD tip Fits 1/2 ID vacuum tubing 360 anodized aluminum swivel at tubing (Quick disconnect swivel adapter remains in tubing while valve body is autoclaved) Anodized aluminum body is designed for repeated autoclaving Fits universal or vacuum holders Easy, no tools needed for assembly 275 F 211

108 VACUUM LEVER LEVER PLASTIC SWIVEL METAL SWIVEL Saliva Ejector $3.90 Central Vac. (HVE) $3.90 Autoclavable (275 F) Gray plastic construction Saliva Ejector $3.90 Central Vac. (HVE) $3.90 Black plastic construction Tapered Saliva Ejector $7.00 Saliva Ejector $6.60 Central Vac. (HVE 1/2) $6.10 Central Vac (HVE 5/8) $7.10 White Plastic construction Saliva Ejector swivels are 5/8 OD and adapt to 3/16 ID or 7/32 ID tubing The Central Vacuum swivels are 7/8 OD and adapt to any 1/2 ID vacuum tubing (or using swivel adapt to 5/8 vacuum tubing) Fits saliva ejector valves , , and Fits central vacuum valves , , , , , and Tapered Saliva Ejector $8.40 Saliva Ejector $8.60 Central Vacuum (HVE 1/2) $12.00 Tapered Central Vacuum $18.20 (HVE 1/2) Central Vacuum (HVE 5/8) $12.00 PRIME SALIVA EJECTOR LEVER VALVE Standard Swivel Tapered Swivel Standard Swivel Tapered Swivel Less Swivel Push-on Tip With Standard Swivel $38.90 Push-on Tip With Tapered Swivel $38.90 Screw-on Tip With Standard Swivel $53.00 Screw-on Tip With Tapered Swivel $53.00 Anodized aluminum and stainless steel construction Autoclavable (275 F) Saliva ejector swivels are 5/8 OD and adapt to 3/16 ID or 7/32 ID tubing Valves with tapered swivels fit ADEC newer style holders with taper Connects to 3/16 ID or 7/32 ID tubing Plastic screen AUTOCLAVABLE SALIVA EJECTOR LEVER VALVE WITH PUSH-ON TIP Valve With Standard Swivel $33.20 Valve With Tapered Swivel $33.20 Valve Less Swivel $29.30 Push-on type tips Quick disconnect valve from swivel for autoclaving (275 F) Variable lever control for on/off and flow control 360 valve rotation Plastic screen Anodized aluminum body is designed for repeated autoclaving Valve with tapered swivel fits ADEC newer style holder with taper Connects to 3/16 ID or 7/32 ID tubing VACUUM Anodized aluminum construction Saliva ejector swivels are 5/8 OD and adapt to 3/16 ID or 7/32 ID tubing The central vacuum swivels are 7/8 OD and adapt to any 1/2 ID vacuum tubing (or using ) swivel adapt to 5/8 vacuum tubing Fits saliva ejector valves , , and Fits central vacuum valves , , , , , and

109 VACUUM 214 AUTOCLAVABLE SALIVA EJECTOR LEVER VALVE WITH SCREW - ON TIP Valve With Standard Swivel $48.50 Valve With Tapered Swivel $48.50 Valve Less Swivel $51.50 Standard Swivel Tapered Swivel Less Swivel Standard Swivel Tapered Swivel Standard Swivel Tapered Swivel Less Swivel Screw-on gray autoclavable saliva ejector tip Quick disconnect valve from swivel for autoclaving Variable lever control for on/off and flow control 360 valve rotation Plastic screen Anodized aluminum swivel Anodized aluminum body is designed for repeated autoclaving (275 F) Valve with tapered swivel fits ADEC newer style holder with taper Connects to 3/16 ID or 7/32 ID tubing PRIME SALIVA EJECTOR LEVER VALVE Valve With Standard Swivel $60.50 Valve Tip With Tapered Swivel $60.50 Anodized aluminum and stainless steel construction Autoclavable (275 F) Valves with tapered swivels fit A-DEC newer style holders with taper Connects to 3/16 ID or 7/32 ID tubing Disposable S.E. Tip is retained by o-ring friction No rubber tip or screen to replace AUTOCLAVABLE SALIVA EJECTOR LEVER VALVE Valve With Standard Swivel $33.20 Valve With Tapered Swivel $35.10 Valve Less Swivel Adapter $29.10 Anodized aluminum saliva ejector valve and swivel No rubber tip or screen to replace Disposable saliva ejector tip is retained by O-ring friction Quick disconnect valve from swivel for autoclaving (275 F) Variable lever control for on/off and flow control 360 valve rotation Anodized aluminum body is designed for repeated autoclaving Valve with tapered swivel fits ADEC newer style holders with taper Connects to 3/16 ID or 7/32 ID tubing SALIVA EJECTOR TIP ASSEMBLY $30.00 Use with water powered type saliva ejector system Black screw-on style tip Plastic screen SALIVA EJECTOR TIP ASSEMBLY $14.00 Use with water powered type saliva ejector systems Black push-on style tip Plastic screen SALIVA EJECTOR CHECK VALVE $35.50 Commonly used with water powered saliva ejectors to control backflow in tubing It is recommended that 7/32 ID ( ) tubing be used with this valve Size 2 3/8 long x 5/8 OD Plastic construction SALIVA EJECTOR TIP ADAPTER ASSEMBLY Black Tip $12.20 Gray Tip $12.20 Adapts to HVE vacuum valve Anodized aluminum body AUTOCLAVABLE SALIVA EJECTOR TIPS ONLY Push-On - Black $3.50 Push-On - Gray $3.10 Screw-On - Black $18.20 Screw-On - Gray $18.20 Replacement Autoclavable saliva ejector tips Push-on and screw-on type SALIVA EJECTOR SCREEN $4.20 Plastic screen fits push-on and screw-on style saliva ejector assemblies Pkg. of 10 SALIVA EJECTOR SCREEN METAL $11.40 Metal construction Plated 215 VACUUM

110 SALIVA EJECTOR VALVE CLEANING BRUSH $ /2 diameter brush Nylon wire twisted brush Package of 5 VACUUM RELIEF MUFFLER 1/2 FPT $ /4 FPT $40.20 Use with wet type vacuum pump Filters and reduces noise from pump air inlet VACUUM VALVE CLEANING BRUSH $ /4 diameter brush Nylon wire twisted brush Package of 5 SURGICAL TIP CLEANING BRUSH $ /16 diameter brush Nylon wire twisted brush Package of 5 VACUUM DRAIN ADAPTER $8.70 VACUUM INLINE FILTER ASSEMBLY $ /4 FPT ports Removable stainless steel screen ( ) and gasket ( ) Clear see-through bowl Plastic construction Fits DENTAL-EZ single vacuum pumps and others CLEAR BOWL REPLACEMENT $26.50 Fits Vacuum Inline Filter Assembly Adapts 1/2 ID vacuum tubing to 5/8 OD vacuum canister drain port VACUUM 216 SALIVA EJECTOR ADAPTER $5.60 Adapts 3/16 ID or 7/32 ID saliva ejector tubing to central vacuum handpiece using 7/16 OD tip SALIVA EJECTOR TUBING ADAPTER $10.40 Saliva ejector tubing barb X 1/2 ID Adapts or saliva ejector tubing to vacuum canisters, 1/2 HVE port White plastic construction SALIVA EJECTOR TUBING ADAPTER $10.40 Saliva ejector tubing barb X 1/4 ID Adapts or saliva ejector tubing to saliva ejector tip White plastic construction FILTER SCREEN $12.20 Fits vacuum inline filter assembly Fits MDT cross ref. # Exact replacement for APOLLO DENTAL vacuum pump inline 3/4 FPT filter assembly Fits AIR-TECHNIQUES VACSTAR cross ref. # Stainless steel construction Fits wet type vacuum pump filters w/ 3/4 FPT ports Commonly used on single vacuum pumps 1 1/2 Dia. X 3 11/16 Long FILTER SCREEN $12.20 Coarse mesh filter screen has a more coarse mesh than screen Also fits vacuum in-line filter assembly if a coarse mesh filter screen is desired Fits MATRX cross ref. # Stainless steel construction Fits wet type vacuum pump filters with 3/4 MPT ports commonly used on single vacuum pumps 1 1/2 dia. X 3 11/16 long 217 VACUUM

111 RUBBER GASKET $2.70 RUBBER GASKET $5.60 Fits vacuum inline filter assembly Fits wet type vacuum pump filters with 3/4 FPT ports Fits vacuum inline filter assembly Fits wet type vacuum pump filters with 1 FPT WALL MOUNTING BRACKET $26.40 WALL MOUNTING BRACKET $30.80 Fits vacuum inline filter assembly , enabling it to be wall mounted Includes Zip-It wall anchors and screws Fits Vacuum Inline Filter Assembly , enabling it to be wall-mounted Includes Zip-It wall anchors and screws VACUUM INLINE FILTER ASSEMBLY $93.00 VACUUM ADAPTER $ FPT ports Removable stainless steel screen ( ) and gasket ( ) Clear see-through bowl Plastic Construction Fits DTE MC-201 and MC-202 dual vacuum pumps and others Commonly used on vacuum pumps 3/4 MPT X 1 dia. straight vacuum adapter Brass construction with installation notches Vacuum Adapter Installation Tool found on pg. 155 MALE GARDEN HOSE TO MALE PIPE 3/4 X 1/2 Brass $7.30 VACUUM CLEAR BOWL REPLACEMENT $45.20 Clear see-through bowl Plastic construction Fits vacuum inline filter assembly 3/4 X 3/4 Brass $6.00 3/4 X 3/4 White Nylon $3.10 Garden hose thread X MPT VACUUM RUBBER GASKET $25.20 FILTER SCREEN $19.60 Fits DENTSPLY MVS series 80 and 84 vacuum pumps with white plastic solids collector Fits vacuum inline filter assembly Fits DENTAL-EZ cross ref. # Also fits MDT cross ref. # Stainless steel construction Fits wet type vacuum pump filters with 1 FPT ports Commonly used on double vacuum pumps 2 1/4 Dia. X 4 7/32 Long Fits VAC STAR 80 Fits APOLLO DENTAL vacuum pump inline filter assembly with 1 FPT ports FILTER SCREEN BASKET $25.20 Fits DENTSPLY MVS, MVS JUNIOR, SPECTRUM II & III vacuum pump solids collectors with glass jar One end closed Stainless steel construction 1 3/8 ID X 5 7/16 Long

112 STANDARD SERVICE TOOLS 220 HEX WRENCH SETS METRIC Standard and Metric Sets High torque steel Black corrosion-resistant finish Long arm series Hex ball end with angle entry to 25 Made in USA Standard set $ /16 Metric Set $ mm-10mm HANDPIECE PRESSURE GAUGE $97.70 AIR SERVICE TOOL TEST GAUGE Used to test dental unit drive air pressure at the handpiece with the handpiece running Fits 5 hole MIDWEST and 6 pin connectors Designed with through holes for air & water coolant 0-60 PSI guage Nickel plated brass and stainless steel construction Air Service Tool $50.30 Replacement Barb Fitting $5.50 Adapts to 5 hole MIDWEST handpiece tubing to provide instant drive air source for testing of components and blowing out plugged tubing, while wearing proper eye and skin protection Nickel plated brass construction Includes barb fitting X 1/16 and 1/8 barb Test Gauge $31.70 Replacement Barb $ PSI gauge Replaceable barb for use w/ 1/16 or 1/8 I.D. tubing UNIVERSAL NIPPERS $52.40 The perfect tool for Service Technicians. Used for removing sleeve clamps, tubing from barbs, toggle pins and many others. Small overall length 4 Flush cutting jaws Insulated handles HEMOSTAT $ /4 overall length Easily capable of clamping off 1/8 or 1/4 supply tubing Serrated jaw for enhanced gripping of part being held Jaw locking capability Stainless steel construction 1/4 NUT DRIVER $45.40 Special Nut Driver for installing x 1/16 barb fitting or and x 1/8 barb fitting or Also fits hex plug and barb fitting x 1/16 x 1/ Counterbore for centering washer while installing O-RING INSTALLATION TOOL KIT $33.00 FOR HANDPIECE COUPLERS Includes two separate O-ring tools to assist when installing O-rings on KAVO MULTIFLEX couplers Use with Chapman-Huffman O-ring Kit Stainless steel construction Fits Chapman-Huffman couplers: , , , , , and REAL COOL SNOOP LEAK DETECTOR $23.00 Detects minute air & gas leaks including: vertical surfaces. Great for natural gas, compressed air and nitrous oxide systems Dries clear Non-flammable No Chlorine, aliphatic amines or amonium compounds Bubbles last longer Includes 12 snooper tube for decting leaks in hard-toreach places Meets performance requirements of MIL-PRF Temperature range -65 F to 200 F Net contents 8 fl. oz. (½ PT.) TEMPORARY LUBRICATING $19.40 AGENT FOR TUBING To aid in the connection of handpiece tubing to handpiece connectors, hook up tubing to barb fittings and vacuum tubing to vacuum handpieces Drys clear 2 fluid ounce, leak proof plastic container TUBING STRIPPER $2.10 Used for separating standard and asepsis tubing TUBING CUTTER Tubing Cutter $25.00 Replacement Blade $11.50 Cuts tubing square and clean For tube OD sizes 1/8 to 1/2 Closes automatically for safe storage 221 SERVICE TOOLS

113 DIAL THERMOMETER F $ dia. bi-metal test thermometer 0 F to 220 F Easy-to-read face Stainless steel construction 5 stem length ± 1% accuracy External recalibration adjustment Protective sheath with pocket clip FOREST STYLE SYRINGE SERVICE TOOL $3.80 Fits FORSTAR-3 syringe for removal of cartridge, tip adapter and barbs Cross ref. # Stainless steel construction SYRINGE BUTTON REMOVAL TOOL $14.10 ROUTING CABLE ASSEMBLY $50.20 SLEEVE INSTALLATION TOOL For pulling an extra 1/8 OD or 1/4 OD tubing, or a needed low voltage electrical wire through an existing umbilical assembly. 12 ft. length Stainless steel construction Easily coiled to fit in any tool case 1/8 Sleeve Tool $ /4 Sleeve Tool $28.90 UTILITY BRUSH Assists with the removal of syringe buttons that are stuck. The tapered design forces the button up and out as you push the tool under the button head Plastic construction Brass Bristles $11.40 Stainless Steel Bristles $11.40 Toothbrush style utility brush Overall length 7 1/2 Brush length 1 3/8 Plastic handle Used for installation of tubing sleeve clamps , and COMBINATION SLEEVE INSTALLATION TOOL $28.90 SALIVA EJECTOR VALVE CLEANING BRUSH $ /2 diameter brush Nylon wire twisted brush Package of 5 Two-in-one tool 1/8 sleeve tool on one end and 1/4 sleeve tool on the other end Used for installation of tubing sleeve clamps , and VACUUM VALVE CLEANING BRUSH $ /4 diameter brush Nylon wire twisted brush Package of 5 SERVICE TOOLS PANEL WRENCH $16.60 Fits 9/16 hex nuts Designed for tightening inside nuts on valves when installed in panel or face plate Zinc plated steel SURGICAL TIP CLEANING BRUSH $ /16 diameter brush Nylon wire twisted brush Package of 5 SERVICE TOOLS

114 GAS SPRING ADJUSTMENT TOOL $34.70 Fits PELTON & CRANE LFII lights 5/16 hex Used to assist in removal of gas spring or its adjustment PELTON & CRANE cross ref. # PARKER O-RING LUBE $19.50 For low pressure (under 200 PSI) Use for vacuum seals Extends life of synthetic O-rings 4 oz. tube Recommended for use w/ Nitrile/Buna N O-rings SOCKET RETRACTOR TOOL $26.10 For removal and installation of bulb in PELTON & CRANE LFI and LF+ lights PELTON & CRANE cross ref. # BULB REPLACEMENT TOOL $10.80 For removal of MIDWEST bulb # Chapman-Huffman part number MIDWEST cross ref. # PARKER SUPER-O LUBE $39.40 Clear silicone base lubricant For plastic and rubber use Improve sealability in vacuum and high pressure systems Useful from -65 to 400 F Moisture resistant 2 oz. tube Recommended for use with viton and ethylene propylene O-rings TEFLON TAPE $4.40 ALL PURPOSE LUBE $15.60 SERVICE TOOLS For sealing pipe threads 1/2 wide x 520 long (approx. 43 ft. long) White Teflon Pop out covered spool ELECTRICAL TAPE $7.50 Light gray color Flame retardant Vinyl plastic tape Maximum operating temperature 105 C (220 F) Suitable for use at maximum 600 volts as primary insulation 3/4 wide X 60 long roll Magnalube brand Contains DUPONT TEFLON Operating range -40 F to 530 F Load range 7000 lbs PSI Water resistant Anti-rust properties TEFLON base lubricates after petroleum base is worn out For O-ring and cylinder seals.75 oz. tube size TEFLON LUBE $21.00 All purpose dry film lubricant Use on metal, wood, glass, paper and virtually any surface Withstands temperatures to 500 F Non-oily and chemically inert, will not attract dust, dirt, lint and atmospheric particles 10 oz. aerosol can - Ground Shipment Only SERVICE TOOLS