Avtron Model M3. Rotary Pulse Generator. Easy to Install Cost Effective Rugged Construction High Resolution Versatile

Transcription

1 Avtron Model M Rotary Pulse Generator Easy to Install Cost Effective Rugged Construction High Resolution Versatile ISO 9001 QUALITY SYSTEM CERTIFIED

2 Model M Rotary Pulse Generator DESCRIPTION The Avtron M is a Digital Rotary Pulse Generator specifically designed to provide precise, accurate, reliable feedback to drive systems and process control systems in today s industrial world. The M combines features from more expensive heavy mill duty designs into a cost effective package. Because of its versatility, it can be used in a wide variety of applications and industries. It can be both a NEMA 56C FACE MOUNTED pulse generator with a 5/8" diameter shaft (Fig. 1), or a HOLLOW unit for a more universal mount on shafts Figure 1 Solid Shaft up to 2 /8" in diameter. (Fig 2). The M can be used as a feedback device in AC and DC drive applications, or for instrumentation purposes into process computers, speed meters, or programmable logic controllers. It has been tested to withstand the electrically noisy environment created by high frequency AC drives. An optional SECOND ISOLATED OUTPUT allows users to send a signal to two different locations. One can be used for drive feedback and the other can be used for instrumentation purposes, or as an on hand spare. TRANSDUCER The M has a high resolution incremental output of up to 2048 pulses per revolution (PPR). It uses a photoelectric sensing circuit for precise resolution and accuracy. The code wheel is a metal disk, not glass or plastic, for maximum reliability. ENCLOSURE The rugged design of the M makes it perfect for virtually all industrial applications in the paper, metals, textiles, plastics, and converting industries. The enclosure seals out contamination in dusty or damp environments. The rugged cast housing will stand up to the conditions and handling usually found in these industries. Motor manufacturers have spent many years improving the performance of standard, cast iron, industrial motors. The pulse generator that is used with these motors should be equal to the task. The M does just that. AL ACCESSORIES Foot Mounting Bracket Second Isolated Output Shaft Grounding Brush Multiple Connector Options Through Shaft Design Marker Pulse Figure 2 Hollow Shaft Features Fits All Motor Frame Sizes Lowest Total Installed Cost Less Time and Less Hardware Bridging the Gap Between Rugged and Cost Effective Sealed Enclosure Optional Second Isolated Output Rugged Cast Housing Optional Shaft Grounding Kit

3 Applications Three styles of M available, depending on application NEMA 56C FACE MOUNTING On motors equipped with a 4.5" adapter flange, the M will mount directly on the C-Face and couple to the motor using a standard coupling ADAPTER FLANGE (Fig ). The M can update or replace any NEMA 56C M face mounted device, including many older styles FLEXIBLE COUPLING of Avtron Pulse Generators like the Figure NEMA 56C Flange Mounting M77A. When used in conjunction with a frequency to voltage converter like the Avtron Model K661, it can replace analog tachometers like the BC46, BC42, and RE210. HOLLOW MOUNTING MOTOR FOOT MOUNTING The M, can be directly coupled to motors and shafts without a machined C-Face, by using the foot mounting bracket. This bracket has a footprint that matches other Avtron heavy mill duty pulse generators. The advantage of this bracket is that you only need to align the bracket once and mount the M on its C-Face. If replacement of the M is needed, simply remove the M from the C-Face bracket and install a spare. No realignment is required (Fig 4). The hollow shaft capability of the M makes it perfect for a wide variety of special mounting applications. With the hollow shaft configuration, no C-Faces, couplings, or adapter flanges are required. On new motors, this greatly reduces the overall installed cost when compared to other styles of pulse generators. The M can Figure 5 TEFC with Shaft Mounted Tach Outboard be mounted on shafts ranging in size from 0.625" to 2.75" in diameter. With this large diameter capability, the Figure 6 TENV with Shaft Mounted M M can be used on large frame motors without the need for a specially engineered stub shaft. The actual non-drive end motor shaft can be used. Figure 7 TENV with Brake and Shaft Mounted Tach (Outboard) For standard AC motor mounting, the M can be mounted outboard of Totally Enclosed, Fan-Cooled (TEFC) motors (Fig 5), on Totally Enclosed, Non-Ventilated (TENV) motors (Fig 6), on motors equipped with disk brakes (Fig 7), and inboard of fans on motors with separate ventilation (Fig 8). Figure 8 TEBC with Shaft Mounted Tach (Inboard), on Fan Seat Consult your motor supplier for specification requirements. M FLEXIBLE COUPLING FOOT MOUNTING BRACKET MOTOR Figure 4 Direct Coupling, Foot Mounting with Bracket

4 Installation Hollow Shaft Installation Sequence Easy as 1 Install Stub Shaft 2 Slide M onto Shaft and Tighten Collar Install Torque Arm No Testing Needed No Special Tools No Mounting Flanges or Couplings INSTALLATION Because the M is fully self contained, there are no complicated alignment procedures required. Simply slide the M onto the shaft, tighten the clamping collar, and connect the anti-rotational bracket to the back of the motor. The M does not depend on precise motor tolerances or C-Faces to operate. Even on motors equipped with machined C-Faces, the Shaft Mounted M has advantages because it eliminates coupling and bearing problems associated with the misalignment of shafts and couplings. UPGRADES The hollow shaft mounting is also very effective for retrofits of existing motors when drive systems are upgraded and the older motors are retained. A complete inventory of shaft adapters to convert just about any motor for M compatibility is available from Avtron. GROUNDING KIT The M can be equipped with an integral shaft grounding brush. Shaft grounding brushes have been shown to be effective in reducing motor bearing problems associated with stray shaft currents. The M shaft grounding brush is actually part of the M and rides directly on the M shaft. No modifications are needed to the motor shaft to use the M with the shaft grounding option. The shaft grounding option is available on both solid and hollow shaft designs. M PART NUMBERS and AVAILABLE S M 1 S 1 D 1024 P 000 Special Modifications A 10 Pin MS Connector without Plug B 10 Pin MS Connector with Flex Conduit Adapter C 10 Pin MS Connector with Plug K 10 Pin MS Connector with Flex Conduit Adapter, on Box L 10 Pin MS Connector with Plug, on Box M 10 Pin MS Connector without Plug, on Box R 10 Pin Miniature MS Connector without Plug S 10 Pin Miniature MS Connector on ' Pigtail P 10 Pin Industrial Connector with Plug Connector V 10 Pin Industrial Connector without Plug E 5 Pin MS Connector without Plug, on Box M77A F 5 Pin MS Connector with Plug, on Box Replacements H 5 Pin MS Connector without Plug, on Box J 5 Pin MS Connector with Plug, on Box M727A Replacements N Conduit Box with Bare Wires T Conduit Box with Terminal Block W ft. Flexible Cable, Sealed X ft. Flexible Cable, Sealed, Industrial Connector without Plug Z ft. Flexible Cable, Sealed, Industrial Connector with Plug D 6 pin MS Connector with plug on box - M940 replacement PPR 240, 256, 60, 480, 500, 512, 600, 1024, 1200, 2048 Other PPR available upon request. R Right 1 5 to 24 VDC Output L Left 2 5 to 18 VDC D Dual 18 to 24 VDC Line Driver Shaft Style S Standard Stub Shaft 0 No Standard Shaft T Thru Shaft with V-Ring 1 5/8 x 2" Solid Shaft Seal (Hollow Shaft Only) Shaft Size 2 5/8 x 2.64" Solid Shaft G Shaft Grounding 5/8" Hollow Shaft 4 1" Hollow Shaft 5 1 1/8" Hollow Shaft 6 2" Hollow Shaft 7 2 /8" Hollow Shaft

5 Specifications ELECTRICAL A. Operating Power 1.Volts VDC (See chart below.) 2.Current...120mA, no load B. Output Format 1.Two Phase with Complements (A, A, B, B )...Available with connector options...a, B, C, K, L, M, N, P, T, V, W, X, & Z...(differential line driver) 2.Marker...Available with all connector options,...1/rev, Gated with B low.single Phase Output at 1/4 of rated PPR C.Signal Type...Incremental, Square Wave, 50 ±10%...Duty Cycle D.Direction Sensing...O/ A leads O/ B by 90 for clockwise rotation as...viewed from the back of the tach looking...at the non-drive end of the motor. E. Transition Sep....15% minimum F. Frequency Range...0 to 150,000 Hz. G.PPR...240, 256, 60, 480, 500, 512, 600, 1024, , Other PPR available...upon request. H.See table for Line Driver Specifications LINE DRIVER SPECIFICATIONS Input Voltage (volts) (Vin) Output High (volts) Output High (milliamps) Output Low (volts) Output Low (milliamps) Protection Line Driver Options VDC Vin minus two volts (typ) 80 (max).5 (typ) 80 (max) Reverse Voltage, Transient, Short Circuit (high and low) 5-18 VDC Vin minus one volt (typ) 80 (Avg), 1500 Peak.5 (typ) 80 (Avg), 1500 Peak Reverse Voltage, Transient, Short Circuit (none) VDC 0 ohm pull up 0 ohm pull up 1 (max) 50 (Avg) Reverse Voltage, Transient, Short Circuit (low) ENVIRONMENTAL A. Enclosure Totally sealed, cast aluminum housing Polyurethane enamel paint protects against corrosion caused by salt spray, solvents, and mild acids and bases B. Operating Temperature Range -20 to 85 C (-4 to 185 F) (Other ranges available upon request) MECHANICAL A. Shaft Inertia: 0.1 oz. in. 2 B. Acceleration: 5,000 RPM/sec C.Speed: 5,000 RPM maximum D.Weight: Approx 5 lbs. E. Shaft Sizes M-1 and M-2: 5 /8" dia. solid shaft Coupling recommended: Thomas Miniature flexible disk or equivalent M- thru M-7: Hollow shaft mount 5 /8" to 2 /8" dia. Others available upon request. Shaft dimension tolerance required / Run out: less than recommended. Maximum Cable Drive (feet) WIRING GRAM volts volts volts 2000 ft 1000 ft FOR DIFFERENTIAL APPLICATIONS SIGNAL CODING TABLE "W" &"N" "A" "B" "C" "K" "L" "M" "P" "V" "X" & "Z" "T" "R" & "S" REF SIGNAL M BLACK RED GREEN YELLOW BLUE GRAY ORANGE WHITE BROWN VIOLET A B D G E H C I F J F D A H B J C K E G COM +V ØA ØA ØB ØB Z Z C C +5 TO +24 VOLTS = MARKER = ØA 4

6 Outline Drawings M- (1, 2) for NEMA 56C or Foot Mounting COVER PLATE SINGLE OUTPUT /16 SQ KEY (FURNISHED) max approx. AL GROUNDING BRUSH AL GROUNDING BRUSH GROUNDING LUG MIN /2 14 NPT /8 16 UNC 2B THREAD "P" 4 HOLES EQUALLY SPACED CONNECTOR W/ MATING PLUG ON A B.C. 1/2 14 NPT LONGER IS FOR USE WITH AL FOOT MOUNTING BRACKET SHOWN BELOW "W" AL FOOT MOUNTING BRACKET M- (, 4, 5, 6, 7) for Hollow Shaft Mounting COVER PLATE SINGLE OUTPUT ANTI-ROTATION BRACKET THRU MODEL ONLY 1/4 20 X 0.62 SOCKET HD CAP SCREW WITH INSULATING WASHERS SUPPLIED "T" CONDUIT BOX WITH TERMINAL BLOCK 4.45 "B" 1/2" FLEXIBLE METAL WATERPROOF CONDUIT/ MS CONNECTOR COLLAR SUPPLIED BY CUSTOMER 1/2 14 NPT V-SEAL 6.50 AL THRU MODEL ENGAGEMENT 1.500/ / / / /2.620 ALSO AVAILABLE WITH GROUNDING BRUSH NOTE: All connector options shown on M-1 through M-7 are available on all units. Specifications and features are subject to change without notice. All dimensions are in inches Rev. A BULLETIN 455