56 FRAME & 56C FRAME FRACTIONAL MOTORS From WorldWide Electric
|
|
|
- Gertrude Norton
- 5 years ago
- Views:
Transcription
1 56 FRAME & FRAME FRACTIONAL MOTORS From WorldWide Electric Suitable For All General-Purpose Applications Motors Single-Phase and Three-Phase Pages Motors Three-Phase Page 3 Stainless Steel / Washdown Duty Motors Three-Phase Page 4 Permanent Magnet DC Motors and Controls Pages 5-6 WorldWide Electric Corporation P.O. Box 307, Pittsford, NY 4534 USA Phone: Fax:
2 FRAME MOTORS Single-Phase - TEFC Enclosure With manual overload Without overload /3-2 HP and RPM volt TEFC enclosure.5 service factor Removable bolt-on / bolt-off base Capacitor start / induction run (/3 - HP) Capacitor start / capacitor run ( - 2 HP) for reduced amperage and high torque Shaft slinger to keep moisture and contaminants from the drive-end bearing Available with or without manual overload 230 V 230 V /3 T3-8-B-OL $ T2-8-B-OL $ T34-8-B-OL $ T-8-B-OL $ T-8-B-OL $ T2-8-B-OL $ V 230 V /3 2 TJ3-36-B-NOL T3-8-B TJ2-36-B-NOL T2-8-B TJ34-36-B-NOL T34-8-B TJ-36-B-NOL T-8-B TJ-36-B-NOL T-8-B TJ2-36-B-NOL T2-8-B $92.9 $29.82 $29.43 $23.6 $232.5 $ $ $28.25 $37.50 $355.8 $ $ * s Seen Here Are List - Please Call For Your Multiplier
3 FRAME MOTORS Three-Phase - TEFC Enclosure /3-2 HP and RPM and 575 volt TEFC enclosure.5 service factor Removable bolt-on / bolt-off base Shaft slinger to keep moisture and contaminants from the drive-end bearing Inverter duty Suitable for 50 hz operation with.0 service factor volt /3 2 ATJ3-36-B AT3-8-B ATJ2-36-B AT2-8-B ATJ34-36-B AT34-8-B ATJ-36-B AT-8-B ATJ-36-B AT-8-B ATJ2-36-B AT2-8-B $73.7 $ $92.27 $22.98 $ $ $ $ $253.4 $326.6 $ $ volt 575 V 575 V /3 575 AT B $ AT B $ AT B $ AT B $ AT B $ AT B $ * s Seen Here Are List - Please Call For Your Multiplier - 2 -
4 56 FRAME MOTORS Three-Phase - TEFC Enclosure /3-2 HP RPM and 575 volt TEFC enclosure.5 service factor Rigid base Shaft slinger to keep moisture and contaminants from the drive-end bearing Inverter duty Suitable for 50 hz operation with.0 service factor volt /3 56 AT $ AT $ AT $ AT-8-56 $ AT-8-56 $ AT $ volt 575 V 575 V / AT $ AT $ AT $ AT $ AT $ AT $ * s Seen Here Are List - Please Call For Your Multiplier
5 STAINLESS STEEL / WASHDOWN DUTY MOTORS Three-Phase - TEFC Enclosure Rigid base /3-2 HP and RPM volt TEFC enclosure.5 service factor C-face - rigid base and round body Double lip seals on both ends of the motor with an additional shaft slinger on the drive-end Inverter duty Suitable for 50 hz operation with.0 service factor Round body /3 WSS3-8-RD $ WSS2-8-RD $ WSS34-8-RD $ WSS-8-RD $ WSS-8-RD $ WSS2-8-RD $ /3 WSS3-8-B $ WSS2-36-B WSS2-8-B WSS34-36-B WSS34-8-B WSS-36-B WSS-8-B WSS-36-B WSS-8-B WSS2-36-B WSS2-8-B $ $58.82 $596.8 $ $6.33 $ $ $7.03 $ $ * s Seen Here Are List - Please Call For Your Multiplier - 4 -
6 PERMANENT MAGNET DC MOTORS volt and 80 volt /4-2 HP RPM, 80, 2 and volt TENV enclosure (/4 - HP) TEFC enclosure ( - 2 HP).0 service factor Removable bolt-on / bolt-off base 20: speed range at constant torque High starting torque Extra set of brushes and brush springs included 2 volt and volt models used in applications where low voltage DC power is supplied by batteries or generators Armature /4 WPMDC4-8-V-B $ /3 WPMDC3-8-V-B $ WPMDC3-8-80V-B $ WPMDC2-8-V-B $ WPMDC2-8-80V-B $ WPMDC34-8-V-B $ WPMDC V-B $ WPMDC-8-V-B $ WPMDC-8-80V-B $ TC WPMDC-8-V-B WPMDC-8-80V-B WPMDC-8-80V-45TC $52.9 $507.8 $ volt and volt 45TC WPMDC2-8-80V-B WPMDC2-8-80V-45TC WPMDC3-8-2V-B WPMDC3-8-V-B WPMDC2-8-2V-B WPMDC2-8-V-B WPMDC34-8-2V-B WPMDC34-8-V-B WPMDC-8-2V-B WPMDC-8-V-B $82.5 $, $ $ $40.69 $408.5 $ $ $57.87 $ Armature / WPMDC-8-V-B $ * s Seen Here Are List - Please Call For Your Multiplier
7 PERMANENT MAGNET DC MOTORS Variable Speed DC Controls Dual voltage - 20/0 VAC, 50/60 hz Adjustable horsepower settings Barrier terminal strip Packaged bridge supply (fullwave) % speed regulation with armature voltage feedback; ± % with tach feedback Adjustable minimum speed (0-30% of max.) Adjustable maximum speed (66-0% of base) Adjustable IR compensation Adjustable linear acceleration (0.5-8 sec.) Adjustable current limit to 5 amps Line voltage compensation 5K ohm speed potentiometer with leads, knob and dial included Power on / off switch 50: speed range Overload capacity: 50% for one minute Transient voltage protection Voltage following mode or DC tachometer follower by supplying underground analog input signal (0-2 VDC) DC tachometer feedback (6 V at base speed) Inhibit circuit - permits start and stop without breaking AC lines Remote start/stop via pot circuit or inhibit circuit Shunt field supply provided ( amp max.; 00 V for 20 VAC; 200 V for 0 VAC input) AC line fuse Rated 4/2 with threaded conduit holes Non-Reversing (ON / OFF) Single-Phase Input Output HP Range 20 VAC 0- VDC /8 -.0 WDCCONT $ VAC 0-80 VDC /4-2.0 WDCCONT $ Reversing (FORWARD / OFF / REVERSE) Single-Phase Input Output HP Range 20 VAC 0- VDC /8 -.0 WDCCONTREV $ VAC 0-80 VDC /4-2.0 WDCCONTREV $66.2 * s Seen Here Are List - Please Call For Your Multiplier - 6 -
8 A COMPLETE FAMILY OF MOTOR PRODUCTS From WorldWide Electric Over $25 Million Worth Of Inventory In Six Regional Warehouses Across The Country Available For Immediate Delivery! 56 and - Stainless Steel / Washdown Permanent Magnet DC Single-Phase T and TC- EPAct Rated T- EPAct Rated TC- Premium T and TC- Explosion Proof T- Vertical Hollow Shaft Explosion Proof TC- Close Coupled Pump Advanced Design Rock Crusher Oil Well Pump HYUNDAI Brandname Medium Voltage WorldWide Electric Corporation
DC3N Non-Regenerative DC Drives
PRICING 1/8-1.0 HP @ 115 VAC, 1-Ph, 50/60 Hz: 90 VDC Armature 1/4-2.0 HP @ 230 VAC, 1-Ph, 50/60 Hz: 180 VDC Armature For the Operation of Permanent Magnet DC Motors Only Product Features: DC3N Plate Model
Applications: Conveyors, machine tools and other applications requiring adjustable speed. Mult. Sym.
HVAC Farm Duty Fractional Horsepower DC Speed Controls for PMDC DC & Controls 1/15 thru 1/4 115 VAC Single Phase 50/60 Hz. Applications: Conveyors, machine tools and other applications requiring adjustable
WDC CONTROL SERIES. Instruction Manual. Variable Speed DC Control
WDC CONTROL SERIES Instruction Manual Variable Speed DC Control P.O. Box 307 1 Grove Street - Suite 201B Pittsford, NY 14534 Phone: (800) 808-2131 Fax: (800) 711-1616 www.worldwideelectric.net TABLE OF
Applications: General purpose industrial use with permanent magnet or shunt wound DC motors. Description
NEMA 1 Enclosed DC Controls for PMDC and Shunt Wound DC & Controls 1/100 thru 2 Hp 115/230 VAC Single Phase 50/60 Hz. Applications: General purpose industrial use with permanent magnet or shunt wound DC
NEMA 1, NEMA 4X and Chassis Mount Adjustable Speed Controls for DC Motors
Made in the U.S.A. NEMA 1, NEMA 4X and Chassis Mount Adjustable Speed Controls for DC Motors Nema Enclosed DC Control Specifications Catalog Number BC140 or Features BC138 BC139 BC140-FBR BC154 BC160 BCWD140
CONTROL FEATURES AVAILABLE OPTIONS
Vari Speed A2000 TABLE OF CONTENTS Control Features Options Application Data Operating Condition s Control Ratings Chart Mounting Dimensions Installation and Wiring Typical Wiring Diagram Schematic (Block
PRODUCT OVERVIEW. Baldor s mission is to be the best (as determined by our customers) marketers, designers and manufacturers
PRODUCT OVERVIEW Baldor s mission is to be the best (as determined by our customers) marketers, designers and manufacturers Motors General Purpose TEFC 1/12 Hp thru 600 Hp stock, to 800 Hp custom Enclosures:
WARNER ELECTRIC. Bronco II 160 Series DC Drives SUPPORTED BY DANA CORPORATION
SUPPORTED BY DANA CORPORATION WARNER ELECTRIC The Warner Electric Motors and Controls Division of Dana Corporation is a global leader in the engineering and manufacturing of motor and control products
Boston Gear Ratiotrol DC Motor Speed Control
Boston Gear Ratiotrol DC Motor Control P-25-BG Installation and Operation Doc. No. 1 DCX Series ll Chassis Models 1/12 - HP a division of Altra Industrial Motion Contents Operating Conditions l II III
SERIES 12 SUB-FHP RIGHT ANGLE DC GEARMOTORS
SERIES 12 SUB-FHP RIGHT ANGLE DC GEARMOTORS SERIES 12 SUB-FHP Electrical Specifications: Both SCR (90 volt) and Low Voltage (12 volt) right angle gearmotors. the 90 volt motors are performance matched
QUICK REFERENCE Stock Sub-FHP Gearmotors
Parallel Shaft PZ Series QUICK REFERENCE Stock Sub-FHP P240 & P300 Series AC Single & Three Phase Single Phase 115V 12-100 In-Lbs Page 102 Single Phase 115/230V 43-391 In-Lbs Page 103 DC SCR & Low Voltage
MaxPak Plus Analog DC V S Drive
Three-Phase 3-600 HP non-regenerative and 5-150 HP regenerative drives Designed to accommodate a wide range of industrial requirements, the DC V S Drive has been widely applied worldwide. Selected ratings
1/6 through 5 HP Adjustable Speed, DC Motor Controllers
1/6 through 5 HP Adjustable Speed, DC Motor Controllers 1/6-5 HP 115 or 230 V, Single Phase - Reconnectable Four Quadrant Regenerative Selectable Deadband AC Line Starting DC Tachometer Feedback Run Contact
Fincor Series 2230 MKII/2240
Fincor Series 2230 MKII/ Fincor Series 2200 regenerative drives are ideal for your more demanding applications. They feature flexibility with ratings up to 5 horsepower. The Series 2230 MKII offers new
2122H. Arm Field Arm Field 1/8-1/ / /8-1/ / / /
Non-Regen Drives Non-regenerative drives are typically used on applications which primarily motor in one direction and stopping is achieved through friction or infrequent use of a dynamic braking resistor.
Boston Gear Ratiotrol DC Motor Speed Control
Boston Gear Ratiotrol DC Motor Speed Control P-3017-BG Doc. No. 60007 Installation and Operation DCX plus Series II Enclosed Models 1/12-1 HP a division of Altra Industrial Motion Contents l General Information
Boston Gear Ratiotrol
Boston Gear Ratiotrol DC Motor Speed Control P-05-BG Doc. No. 85 Installation and Operation RP, RPR /6-/ HP RP, RPR /4- HP a division of Altra Industrial Motion GENERAL INFORMATION Description Boston Gear
DC Motors & Controls for many different applications
DC Motors & Controls for many different applications Baldor offers the widest variety of DC Motors. From 1/50 to 3000 horsepower, our rugged industrial designs may be used to power everything from a medical
Boston Gear Ratiotrol
Boston Gear Ratiotrol DC Motor Speed Control Installation and Operation Doc. No. 3721 RG1 and RG2 Models 1/6-1 HP GENERAL INFORMATION DESCRIPTION Series RG Controllers statically convert single-phase AC
KBIC SCR DC Motor Speed Controls
KBIC SCR DC Motor Speed Controls Ultra Fast CL Circuit Prevents Demagnetization in PM Motors Installation and Operation Manual BASIC KBIC * See SAFETY WARNING * See CE information on page 5 This Manual
A flexible, reliable and affordable drive for 1/4 through 2 HP DC applications
A flexible, reliable and affordable drive for 1/4 through 2 HP DC applications DC2 drives combine application flexibility, compact size and reliability into an affordable adjustable speed package that
DUAL SWIVEL REEL OPERATING INSTRUCTIONS
DUAL SWIVEL REEL OPERATING INSTRUCTIONS MODELS 100 & 1000 SERIES RAPID-AIR CORPORATION 4601 KISHWAUKEE ST. ROCKFORD, IL 61109-2925 Phone: (815) 397-2578 Fax: (815) 398-3887 Web Site: www.rapidair.com OPERATING
Installation and Operation Manual. *See page 6 for CE Information
Installation and Operation Manual KBMM Surface Mount Technology Solid State SCR DC Motor Speed Controls for Use with 1/100 3 HP, 90 and 180 Volt Permanent Magnet and Shunt Wound DC Motors* AC Line Input:
KBPC-240D (Part Nos and 9342) Installation and Operation Manual Supplement
The Right Control for Your Application. 12095 NW 39 Street, Coral Springs, FL 33065-2516 Telephone: 954-346-4900; Fax: 954-346-3377 KB Electronics, Inc. www.kbelectronics.com KBPC-240D (Part Nos. 9338
Graham. Vari Speed S1000 Instruction Manual. TRANSMISSIONS, Inc. Installation, Operation and Maintenance Manual
Graham TRANSMISSIONS, Inc. Installation, Operation and Maintenance Manual Vari Speed S1000 Instruction Manual TABLE OF CONTENTS Introduction 4 Unit Features 5 Operating Conditions 6 Specifications 7 Ratings
Fincor DC Drives. Flexible & Powerful TYPICAL APPLICATIONS. Conveyor Rugged. Extruder Reliable. Conveyor Simple. Mixer Flexible
DC Drives Flexible & Powerful single-phase DC drives provide a complete family solution from the compact Series 2120 chassis drive to the powerful Series 2230 and it s feature rich application specific
Boston Gear Ratiotrol DC Motor Speed Control
Boston Gear Ratiotrol DC Motor Speed Control P-3049-BG Doc. No. 83721 Installation and Operation RG1 and RG2 Models 1/6-1 HP a division of Altra Industrial Motion Contents General Information.....................
INSTALLATION AND OPERATION MANUAL SUPPLEMENT KBPC-225 (PART NOS & 9392)
The Right Control for Your Application. 12095 NW 39 Street, Coral Springs, FL 33065-2516 Telephone: 954-346-4900; Fax: 954-346-3377 KB Electronics, Inc. www.kbelectronics.com INSTALLATION AND OPERATION
CABINET REEL OPERATING INSTRUCTIONS
CABINET REEL OPERATING INSTRUCTIONS (Rev. 1) RAPID-AIR CORPORATION 4601 KISHWAUKEE ST. ROCKFORD, IL 61109-2925 Phone: (815) 397-2578 Fax: (815) 398-3887 Web Site: www.rapidair.com OPERATING INSTRUCTIONS
Inverter Speed Ratio Information
Inverter Speed Ratio Information Guidelines for Application of General Purpose,, Single Speed on Variable Frequency Drives Meets NEMA MG1-2006 Part 30 and Part 31 Section 4.4.2 Unless stated otherwise,
DC Drive Selection Guide
DC Drive Selection Guide KB Electronics, Inc. All models can be customized for OEM s: Ready to Use, Out-of-the-Box. A wide variety of factory installed options add versatility to the drives while maintaining
BRONCO VFD. October
BRONCO VFD October 2004 www.danahermotion.com Mechanical and Electro-Mechanical Product Solutions by Danaher Motion New Name, Established Brands Danaher Motion s wide range of motion control systems and
180VC WITH B5 FLANGE / M ,6 0, / M l 5,0 0,7 192 / M ,0 0,9 223
METRIC (IEC) FRAME THYRISTOR RATED DC METRIC (IEC) FRAME MOTORS IP54 These metric dimensioned motors are built to IEC 34-1 electrical and mechanical standards. The IEC 63 and smaller frames are stocked
SECTION MOTOR REQUIREMENTS for HVAC
PART 1 GENERAL 1.1 SECTION INCLUDES A. Single-phase electric motors B. Three-phase electric motors 1.2 REFERENCES SECTION 23 05 13 MOTOR REQUIREMENTS for HVAC A. ABMA 9 - Load Ratings and Fatigue Life
RBD Series. Installation and Maintenance Manual. An Altra Industrial Motion Company
RBD Series Installation and Maintenance Manual An Altra Industrial Motion Company TABLE OF CONTENTS INTRODUCTION... 3 CONTROL FEATURES... 3 HEATSINK DIMENSIONS... 3 SPEEDPOT KIT ASSEMBLY... 4 MOUNTING
RCP200 Series Motor Controls. Instruction Manual Model RCP Model RCP Model RCP202-BC1 Model RCP202-BC2 Model RCP205-BC2
RCP200 Series Motor Controls Instruction Manual Model RCP202-000 Model RCP205-000 Model RCP202-BC1 Model RCP202-BC2 Model RCP205-BC2 You ve just purchased the best! Congratulations! You ve just purchased
Small and Medium DC Motors
Small and Medium DC Motors Inverter Duty AC Motors RPM AC Inverter Duty RPM III Medium DC Motors General Information Introduction M-283 Introduction General Information RPM III Medium DC Motors Inverter
DC MOTORS NEMA FRAME SCR RATED
NEMA FRAME SCR RATED NEMA FRAME MOTORS SCR RATED High voltage permanent magnet DC motors are typically used with an SCR (thyristor) controller in applications requiring adjustable speed and constant torque
Series 5 Inverter OPEN CHASSIS MOUNT - SINGLE PHASE INPUT. For Catalog Nos. ID56F50-CO, ID5601-CO & ID5602-CO
Series 5 Inverter OPEN CHASSIS MOUNT - SINGLE PHASE INPUT For Catalog Nos. ID56F50-CO, ID5601-CO & ID5602-CO 1/17 Installation & Operating Manual MN781 Table of Contents Chapter 1 Introduction Introduction...
Stock Variable Speed AC & DC Motor Controls & Accessories. KB Electronics, Inc. Selection Guide GS-118A
Stock Variable Speed AC & DC Motor Controls & Accessories Selection Guide GS-118A AC MOTOR SPEED CONTROLS (Inverters) KBVF AC Chassis (IP-20) Inverters Model Part No. The KBVF Adjustable Frequency Drive
Copyright 2013 Automationdirect.com Incorporated All Rights Reserved
GSD7 Series DC Drives User Manual User Manual Number: IH-GSD7-User-M IronHorse GSD7 DC Drives User Manual 1st Ed, Rev A 12/12/2013 Page 1 ~ WARNING ~ Thank you for purchasing automation equipment from
1/4HP - 7.5HP 120/240/277 VOLTS 50/60HZ
Installation & Operating Procedures DG2 Series SINGLE PHASE CONVERTERS 1/4HP - 7.5HP 120/240/277 VOLTS 50/60HZ TABLE OF CONTENTS 1.0 DESCRIPTION... Pg. 1 2.0 INSTALLATION AND START-UP... Pg. 3 3.0 DRAWING
Small and Medium DC Motors
Large AC Small and Medium DC Motors RPM III Medium DC Motors General Information RPM AC Inverter Duty Inverter Duty AC Motors For pricing information or to place orders, go to www.ptplace.com M-222 RPM
Model ER-340XRi / ER-680XRi / ER-1220XRi DC drive product manual HG iss 9 1
Model ER-340XRi / ER-680XRi / ER-1220XRi DC drive product manual HG102909 iss 9 1 This drive is an isolated 4 Quadrant speed controller for shunt wound or permanent magnet motors. It utilises speed feedback
Model 340i / 680i / 1220i DC drive product manual HG iss 8 1
Model 340i / 680i / 1220i DC drive product manual HG102938 iss 8 1 Sprint Electric Limited, Arundel, UK Tel. +44 (0)1903 730000 Fax. +44 (0)1903 730893 Email. info@sprint-electric.com www.sprint-electric.com
GS10 Series MODELS: GS10 GS10-R NEMA 4X SCR MOTOR CONTROLS. User s Manual
GS10 Series MODELS: GS10 GS10-R NEMA 4X SCR MOTOR CONTROLS User s Manual Safety Warnings SHOCK HAZARD AVOID HEAT KEEP DRY AVOID VIBRATION This symbol denotes an important safety tip or warning. Please
BC141, BC142, BC142-5 & BC142-6 DC Control
BC141, BC142, BC142-5 & BC142-6 DC Control 5/17 Installation & Operating Manual MN704 Any trademarks used in this manual are the property of their respective owners. Important: Be sure to check www.baldor.com
CABINET REEL OPERATING INSTRUCTIONS
CABINET REEL OPERATING INSTRUCTIONS MODELS R50, R60 & R70 SERIES RAPID-AIR CORPORATION 4601 KISHWAUKEE ST. ROCKFORD, IL 61109-2925 Phone: (815) 397-2578 Fax: (815) 398-3887 Web Site: www.rapidair.com OPERATING
"Motors, Power, and Data Loggers Greg Jourdan-Wenatchee Valley College Carol Lewellen-NEEC and BOC Tuesday, May 8, Sessions Session
"Motors, Power, and Data Loggers Greg Jourdan-Wenatchee Valley College Carol Lewellen-EEC and BOC Tuesday, May 8, 2018 3 Sessions Session 1-8:30-9:25 a.m. Motors 101 Session 2-9:30-10:25 a.m. - Power Session
QUICK REFERENCE Stock Sub-FHP Gearmotors
QUICK REFERENCE Stock Sub-FHP AC Single & Three Phase DC SCR & Low Voltage Parallel Shaft PZ Series Single Phase 115V 12-100 In-Lbs Page 166 DC SCR 90 & 180V 10-100 In-Lbs 36-100 In-Lbs torque Page 156
SERIES 2335 SINGLE-PHASE ADJUSTABLE-SPEED DC MOTOR CONTROLLERS (1/6-2 HP)
Rev. 02/97 SERIES 2335 SINGLE-PHASE ADJUSTABLE-SPEED DC MOTOR CONTROLLERS (1/6-2 HP) TABLE OF CONTENTS SECTION TITLE PAGE I GENERAL INFORMATION 1 Introduction 1 General Description 1 Model Types 1 Motor
WARNER ELECTRIC. Quadraline 7000 DC Drives SERVO CONTROLS STEPPER CONTROLS VOLTAGE CONDITIONING ENGINEERED SYSTEMS AC/DC DRIVES
WARNER ELECTRIC DC Drives SERVO CONTROLS STEPPER CONTROLS VOLTAGE CONDITIONING ENGINEERED SYSTEMS AC/DC DRIVES ADDITIONAL WARNER ELECTRIC DC DRIVES & CONTROLS BRONCO II and Washdown Series DC Drives Designed
AC Motor Brakes. General Information. Features. Add-On Brakes. Spring Applied Power-Off Operation. Motor Brake Coil Current. Mounting.
Spring Applied Power-Off Operation Power-Off Operation Inertia Dynamics AC-style, spring applied motor brakes are designed to decelerate or park inertial loads when the voltage is turned off, either intentionally
INSTALLATION AND OPERATING INSTRUCTIONS REGENERATIVE DRIVE MODEL KBRG-255 (5HP) KB Part No FULL WAVE 4 QUADRANT FWD ACCEL REV ACCEL FWD CL
INSTALLATION AND OPERATING INSTRUCTIONS REGENERATIVE DRIVE MODEL KBRG-255 (5HP) KB Part No. 8821 FULL WAVE 4 QUADRANT FWD EN FWD ACCEL REV ACCEL DB MAX IR REV SPD RESP COMP CL FWD CL S/LT NLT OFFSET J8
Filtered PWM Speed Control for Permanent Magnet DC Motors
Instructions for Installation and Operation Filtered PWM Speed Control for Permanent Magnet DC Motors Model 0794 Speed and Direction Control up to 5/8 HP NEMA-1/IP-20 Specifications Product Type:... WPM-2148E1
Definite Purpose Motors. Three Phase, Two Speed, TEFC, Foot Mounted. 3/4 thru 25 Hp NEMA 56 thru 324T
Unit Handling Brake 200 & 575 Volt IEC & Controls DC 158 Two Speed, TEFC, Cast Iron 3/4 thru 25 56 thru 324T Applications: Fans, blowers, machine tools, hoists, conveyors, pumps. Features: Designed for
PALLET MASTER (PMD) OPERATING INSTRUCTIONS
PALLET MASTER (PMD) OPERATING INSTRUCTIONS MODELS (INCLUDES PMD35 & PMD50. 115VAC, 1PH, 60HZ) RAPID-AIR CORPORATION 4601 KISHWAUKEE ST. ROCKFORD, IL 61109-2925 Phone: (815) 397-2578 Fax: (815) 398-3887
INSTALLATION AND OPERATING INSTRUCTIONS REGENERATIVE DRIVE FULL WAVE 4 QUADRANT REV S/LT NLT R33 AC LINE FUSE ARMATURE F2 FUSE TB2
INSTALLATION AND OPERATING INSTRUCTIONS REGENERATIVE DRIVE MODEL KBRG-225D (P/N 8800) MODEL KBRG-240D (P/N 8802) FULL WAVE 4 QUADRANT FWD EN FWD REV ACCEL ACCEL DB MAX IR REV FWD SPD RESP COMP CL CL S/LT
TABLE OF CONTENTS WARRANTY. 1 INTRODUCTION. 2 CONTROL FEATURES. 2 HEATSINK DIMENSIONS. 2 SPEEDPOT KIT ASSEMBLY. 3 MOUNTING PROCEDURE.
250G CONTROL SERIES CONTROLS Instruction Manual Variable Speed DC Control P.O. Box 10 5000 W. 106th Street Zionsville, Indiana 46077 Phone (317) 873-5211 Fax (317) 873-1105 www.dartcontrols.com TABLE OF
QUICK REFERENCE Stock Sub-FHP Gearmotors
QUICK REFERENCE Stock Sub-FHP Right-Angle Worm Type 10 & 13 Series AC Single & Three Phase Single Phase 115/230V 14-113 In-Lbs Page 155 DC SCR & Low Voltage DC SCR 90 & 180V 5-135 In-Lbs Low Voltage (12V)
DO NOT INSTALL, REMOVE, OR REWIRE THIS EQUIPMENT WITH POWER APPLIED.
Safety Warnings i This symbol denotes an important safety tip or warning. Please read these instructions carefully before performing any of the procedures contained in this manual. DO NOT INSTALL, REMOVE,
56C Flange Motors. Single Phase - 115/ Volt 56C Frame - TEFC Enclosure. Three Phase /460 Volt 56C Frame - TEFC Enclosure
General Purpose Special Purpose Flange Jet Pump Resilient Mount Compressor Duty The Leader In Providing High Quality Low Cost, Sourced WorldWide lectric Corporation Flange Single Phase - Volt - nclosure
CN0055 & CN0055B DC to DC NEGATIVE RESISTANCE SPEED CONTROL
CN0055 & CN0055B DC to DC NEGATIVE RESISTANCE SPEED CONTROL 0 M P A N Y 3879 SOUTH MAIN STREET 714-979-6491 SANTA ANA, CALIFORNIA 92707-5710 U.S.A. This manual contains information for installing and operating
DC1 V*S DRIVES. D a1 =-=- v_e_s DC1 V*S DRIVES. REL.IANCEll'II ELECTR1c o. EFFECTIVE July 1,
D a1 =-=- v_e_s DC1 V*S DC1 V*S REL.IANCEll'II ELECTR1c o EFFECTIVE July 1, 1989 03-7 DCI D-C v*s Armature voltage, tachometer, or armature current (torque) feedback. Complete appllcatlon adjustments.
Snap-Trol 183 Nema 1 Series
SnapTrol 183 Nema 1 Series Instruction Manual Model P18370530 183TN1 Model P18370540 183TN1R 11/03/05 1.0 Introduction Extron has been a leader in producing quality variable speed controls for over 20
Installation & Operation Manual
Installation & Operation Manual SECO SE 2000 Series DC Motor Controller 1 Through 5 HP 115/230 VAC 1 Phase Input TABLE OF CONTENTS Section Page 1.0 GENERAL INFORMATION... 3 1.1 Controller... 4 1.2 Specifications...
Series 2330MKII. Single-Phase. Adjustable-Speed. DC Motor Controllers (1/6 3 HP) BOOK 0958-B
Series 2330MKII Single-Phase Adjustable-Speed DC Motor Controllers (1/6 3 HP) Control Techniques 3750 East Market Street York, PA 17402-2798 717-751-4200, FAX 717-751-4263 www.fincor.net BOOK 0958-B SERIES
A. Motors shall be designed, built, and tested in accordance with the latest revision of the following standard documents.
PART 1: GENERAL 1.01 This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is to apply the
RVS-DN Digital Reduced Voltage Motor Starter
RVS-DN Digital Reduced Voltage Motor Starter Specification Guide Specification Guide Contents 1.0 Introduction 2.0 Specifications 2.1 Standard Performance Features 2.2 Standard Protection Features 2.3
NEW EQUIPMENT WARRANTY
NEW EQUIPMENT WARRANTY We warrant that this equipment from U.S. Stoneware Corporation is within stated specifications and is free from defects in materials and workmanship. Our obligation under this warranty
MAXIMUM OUTPUT AC SUPPLY INPUT SPEED RANGE USER ADJUSTMENT EXTERNAL CONTROL CONTROL ACTION INSTALLATION
1 DRM050IR / DRM100I / DRM200IR DC Motor Controller Product Manual This drive is an isolated single direction speed controller for shunt wound or permanent magnet motors. It utilizes speed feedback from
DC Motors. DC Motors. Gearmotors. AC / DC Controls. Accessories / Kits. Mods / Factory Options. X-Ref / Index. Tech. Information.
Motors Motors Gearmotors AC / s Accessories / Kits, explosion proof, SUB-F, washdown, IEC and low voltage motors available Permanent magnet designs PWM or SCR rated and low voltage input voltage designs
WarninG TraDeMarkS Copyright 2013, 2018 Automationdirect.com Incorporated All Rights Reserved
GSD5 Series DC Drives User Manual User Manual Number: GSD5_UMP IronHorse GSD5 DC Drives User Manual 1st Ed, Rev C 02/22/2018 Page 1 ~ WARNING ~ Thank you for purchasing automation equipment from Automationdirect.com,
User s Manual. SCR, Adjustable Speed Drives for DC Brush Motors
MM23000 Series User s Manual SCR, Adjustable Speed Drives for DC Brush Motors Copyright 2001 by Minarik Corporation All rights reserved. No part of this manual may be reproduced or transmitted in any form
Boston Gear Ratiotrol
Boston Gear Ratiotrol DC Motor Speed Control Installation and Operation Doc. No. 57766 Beta Plus Series Single Phase 1/6-3 HP Inside Front Cover BLANK Table of Contents SECTION TITLE PAGE WARNINGS... 3
DC Motors & Controls. Subfractional Permanent Magnet DC Motor - TENV, Rigid Base. SCR Drive Permanent Magnet Motor - TENV and TEFC, C-Face with Base
Subfractional Permanent Magnet DC Motor - TENV, Rigid Base 1/50 thru 1/4 DC & Controls Applications: General purpose including conveyors, material handling equipment and packaging machinery. Features:
DC Motors & Controls. Subfractional Permanent Magnet DC Motor - TENV, Rigid Base. SCR Drive Permanent Magnet Motor - TENV and TEFC, C-Face with Base
Subfractional Permanent Magnet DC Motor - TENV, Rigid Base 1/50 thru 1/4 Hp DC & Controls Applications: General purpose including conveyors, material handling equipment and packaging machinery. HVAC Features:
KBWS WHISPER DRIVE PULSE WIDTH MODULATED (PWM)
INSTALLATION AND OPERATING INSTRUCTIONS KBWS WHISPER DRIVE PULSE WIDTH MODULATED (PWM) DC Motor Speed Control with Built-In Input Signal Isolation See Table 1 on page 10 for a list of KBWS Models covered
KBVF Adjustable Frequency Drive
INSTALLATION AND OPERATING INSTRUCTIONS KBVF Adjustable Frequency Drive Variable Speed /Soft-Start AC Motor Control with I 2 t Electronic Overload Protection for 3-Phase Induction Motors through 1 HP!
Signature Series & Ultimate E Motors, High Performance & Premium Efficiency. Alum. Aluminum And Steel TEFC & ODP Motors C O M P LIA N T
& Motors, High Performance & Premium Efficiency Alum. EPAct Aluminum And Steel TEFC & ODP Motors C O M P LIA N T or : High Performance and Pr Beyond Energy Efficient Lincoln and motors provide both premium
TABLE OF CONTENTS SPECIFICATION CHART...8 RATIOPAX DCX/DCXplus BETA II BETAplus VEplus
Single-Phase Adjustable Speed RATIOTROL SYSTEMS TABLE OF CONTENTS SPECIFICATION CHART...8 RATIOPAX...9-10 DCX/DCXplus...11-15 BETA II...16-20 BETAplus...21-25 VEplus...26-30 OPTIONS FOR DC CONTROLLERS...38-46
WARREN COUNTY, N.Y. M/E REFERENCE A. Submit manufacturer's product data on all motors and adjustable speed drives.
SECTION 230513 - MOTORS AND ADJUSTABLE SPEED DRIVES PART 1 - GENERAL 1.1 DESCRIPTION A. Provide labor, materials, equipment and services as required for the complete installation designed in Contract Documents.
Stock Product Quick Reference Guide
Stock Product Quick Reference Guide A Regal Brand Thousands of solutions. One matched perfectly to your needs. More than 6,000 stock motors, gearmotors, gear reducers and control designs available. Yes,
SERIES 2600/2610 SINGLE-PHASE ADJUSTABLE-SPEED DC MOTOR CONTROLLERS (1/6-5 HP)
Rev. 11/01 SERIES 2600/2610 SINGLE-PHASE ADJUSTABLE-SPEED DC MOTOR CONTROLLERS (1/6-5 HP) TABLE OF CONTENTS SECTION TITLE PAGE I GENERAL INFORMATION 1 Introduction 1 General Description 1 Model Types 1
LEESON Your Complete Source For Quality DC Motors And More
LEESON Your Complete Source For Quality DC Motors And More Today s LEESON offers one of the industry s broadest and most accessible ranges of AC and DC commercial and industrial electric motors, gearmotors,
STRAIGHTENER OPERATING INSTRUCTIONS
STRAIGHTENER OPERATING INSTRUCTIONS MODELS SBX SERIES (ADJUSTABLE PLATEN STOCK STRAIGHTENER INCLUDES SA3 THROUGH SCX) (6-01) RAPID-AIR CORPORATION 4601 KISHWAUKEE ST. ROCKFORD, IL 61109-2925 Phone: (815)
STRAIGHTENER OPERATING INSTRUCTIONS
STRAIGHTENER OPERATING INSTRUCTIONS MODELS SBX, SCX & SD SERIES (4-02) RAPID-AIR CORPORATION 4601 KISHWAUKEE ST. ROCKFORD, IL 61109-2925 Phone: (815) 397-2578 Fax: (815) 398-3887 Web Site: www.rapidair.com
Definite Purpose Motors. Three Phase, Two Speed, TEFC, Foot Mounted. Applications: Fans, blowers, machine tools, hoists, conveyors, pumps.
Three Phase, Two Speed, TEFC, 1 thru 25 56 thru 324T Applications: Fans, blowers, machine tools, hoists, conveyors, pumps. Features: Lifting eye bolt mounted at top center 215T frame and larger for easy
CUSTOM DC MOTORS & GEARMOTORS
& GEARMOTORS Battery-powered, 24-volt motor with close coupled hydraulic pump mounting on one end and standard NEMA 56 C face and shaft on other end. Totally enclosed fan cooled, SCR rated, partial motor
TABLE OF CONTENTS STANDARD FEATURES
65E10 CONTROL SERIES CONTROLS Instruction Manual For DC Input Variable Speed Controls P.0. Box 10 5000 W. 106th Street Zionsville, Indiana 46077 Phone (317) 873-5211 Fax (317) 873-1105 www.dartcontrols.com
5001TCP SPEED CONTROLLER
INSTALLATION AND SETTING UP MANUAL 5001TCP SPEED CONTROLLER WARNING Disconnect all incoming power before working on this equipment. Follow power lockout procedures. Use extreme caution around electrical
Avtron Model M3. Rotary Pulse Generator. Easy to Install Cost Effective Rugged Construction High Resolution Versatile
Avtron Model M Rotary Pulse Generator Easy to Install Cost Effective Rugged Construction High Resolution Versatile ISO 9001 QUALITY SYSTEM CERTIFIED Model M Rotary Pulse Generator DESCRIPTION The Avtron
Open Chassis Star-Delta Starter User Guide
Open Chassis Star-Delta Starter User Guide (7.5kW~90kW) V2.0.1 Contents 1 Safety information... 1 2 Technical Data... 2 3 Supply & Motor Connections & Circuit Diagrams... 5 4 Control Connections & Operation...
Century Style Analog Panel Meters
UL Recognized File # E91015 Except for the Wattmeters and Frequency Meters Glass window for optimum viewing Rugged black plastic case Black knife-edge pointer for precision reading The Specifications &
1/50 thru 1/4 Hp. Catalog Number. Applications: Conveyors, mixers, packaging machinery. Enclosure
Subfractional Permanent Magnet DC Motor - TENV, Rigid Base 1/50 thru 1/4 Hp DC & Controls Applications: General purpose including conveyors, material handling equipment and packaging machinery. HVAC Features:
CUSTOM DC MOTORS & GEARMOTORS
& GEARMOTORS Battery-powered, 24-volt motor with close coupled hydraulic pump mounting on one end and standard NEMA 56 C face and shaft on other end. Totally enclosed fan cooled, thyristor rated, partial
The Best Value in Washdown Duty Motors and Drives
The Best Value in Washdown Duty Motors and Drives Long before we invested in the people, equipment and material required to produce Baldor Reliance Washdown Duty motors and drives, we invested our time
1/ Horsepower Product Line DPG-FV, TEFC, TENV, XP, SPG enclosures Fractional DC DC PM SCR Round RPM III
DC & Controls Available in round frame and unique laminated square frames, Reliance DC motors offer performance and reliability in tough applications. Round frame DC motors utilize permanent magnet technology
10A 7.5A 5.0A 2.5A 1.7A J1A 115V 230V J1A 115V 230V J3 T50 T7 A180 A90 J3 T50 T7 A180 A90 J1B J1B 230V 115V 230V 115V J4 Set for 15V Position 10V 15V J4 Set for 10V Position 10V 15V J5 SPD TRQ J5 SPD TRQ
500 CONTROL SERIES. Instruction Manual Variable Speed DC Control. Phone (317) Fax (317)
500 CONTROL SERIES Instruction Manual Variable Speed DC Control 5000 W. 106th Street Zionsville, Indiana 46077 Phone (317) 873211 Fax (317) 873105 LT500 (IM00-0196) TABLE OF CONTENTS WARRANTY... 1 INTRODUCTION...