PT8420 Cable Actuated Sensor Industrial ma 0..20mA

Transcription

1 PT8 Cable ctuated Sensor Industrial.. m..m bsolute Linear Position to 6 inches (5 mm) luminum or Stainless Steel Enclosure Options VLS Option to Prevent Free-Release Damage IP68 / NEM 6 Hazardous rea Certification GENERL.6 [9 mm] Output Signal 5.6 [ mm] The PT8 with its - m feedback signal, is ideal for monitoring the stroke of a hydraulic cylinder and other applications requiring position data acquistion in harsh environments. s a member of our family of NEM -rated cable-extension transducers, the PT8 provides a feedback signal that is proportional to the linear movement of a traveling stainless-steel extension cable. Simply mount the body of the transducer to a fixed surface and attach the extension cable to the moving object. Full Stroke Range Options - to -6 inches Output Signal Options... m (-wire) and... m (-wire) ccuracy see ordering information Repeatability ±.5% full stroke Resolution essentially infinite Measuring Cable Options stainless steel or thermoplastic Enclosure Material powder-painted aluminum or stainless steel Sensor plastic-hybrid precision potentiometer Potentiometer Cycle Life see ordering information Max. Retraction cceleration see ordering information ELECTRICL Input Voltage see ordering information Input Current m max. Max. Loop Resistance (Load) (loop supply voltage - 8)/. Circuit Protection 8 m max. Impedance M ohms@ VDC, min. Signal djust, Zero from factory set zero to 5% of full stroke range Signal djust, Span to 5% of factory set span Thermal Effects, Zero.% f.s./ F, max. Thermal Effects, Span.% f.s./ F, max. spring loaded cable reel... m* (% fs.) (% fs.) cable extension ENVIRONMENTL Enclosure NEM /X/6, IP 67/68 Hazardous rea Certification see ordering information Operating Temperature - to F (- to 9 C) Vibration up to g s to Hz maximum Weight, luminum Enclosure lbs. max. Weight, Stainless Steel Encl. 6 lbs. max. *Optional -wire,...m output signal available. SENSOR SOLUTIONS /// PT8 PGE

2 PT8 Industrial m / m Output Signal Outline Drawing: see eyelet detail eyelet detail.99 [5,] Ø.9 [,9]* Ø.75 [9,5]**.8 [5,7].65 [,9]**.8 [,].5 [88,9].9 [6,].5 [7,6].6 [9,]. [,] 5.56 [,] max..6 [5,] RNGE,.6 [9,5] 5, 5, 5.66 [6,8] 5.99 [5,7],.85 [,6], 6.5 [,]. [76,] DIMENSIONS RE IN INCHES [MM] tolerances are ±. in. [±,5 mm] unless otherwise noted note: *tolerance = +.5. [+..] **tolerance = [+..] Ordering Information: Ø.7 [6,8] thru ( places).6 [,6] Model Number: Full Stroke Range: R order code: full stroke range, min: accuracy (% of f.s.): potentiometer cycle life*: PT order code: R B C D E F G order code: enclosure: cable tension: max. acceleration: Sample Model Number: PT R range: inches enclosure/cable tension: aluminum/standard ( oz.) B measuring cable:. nylon-coated stainless E output signal:...m, -wire F electrical connection: 6-pin plastic connector G cable guide option: standard nylon cable guide in. 5 in. in. 5 in. in. 5 in. in. in. 5 in. 6 in..%.%.8%.8%.8%.8%.8%.5%.5%.5%.5 x 6.5 x 6 5 x 5 5 x 5 5 x 5 5 x 5 5 x 5.5 x 5.5 x 5.5 x 5 * cycle is defined as the travel of the measuring cable from full retraction to full extension and back to full retraction Enclosure Material and Measuring CableTension: aluminum stainless 6 stainless standard medium high standard medium high standard medium high 5 g 5 g g 6 g g 8 g 6 g g 8 g cable tension option specifications Range: in. 5 in. in. 5 in. in. 5 in. in. in. 5 in. 6 in. Standard: 9 oz. 6 oz. 9 oz. 6 oz. oz. 6 oz. oz. oz. 6 oz. oz. Medium: 65 oz. 6 oz. 65 oz. oz. oz. 6 oz. oz. oz. 6 oz. oz. High: 6 oz. 7 oz. 6 oz. 77 oz. 6 oz. 7 oz. oz. 6 oz. 7 oz. oz. tension tolerance: ± 5% SENSOR SOLUTIONS /// PT8 PGE

3 R PT8 Industrial m / m Output Signal Ordering Information (cont.): Measuring Cable: B order code: cable construction: available ranges: general use: Ø.-inch nylon-coated Ø.7-inch bare Ø.58-inch PVC jacketed vectra fiber rope Ø.-inch bare all ranges 5, 5,, 5, -inch only thru inches only, 5, 6-inch only indoor outdoor, debris, high temperature high voltage or magnetic field outdoor, debris, high temperature Output Signals: E order code: output signal options: 5* 6*... m... m... m... m... m... m sensitivity: 6 m/full stroke ±.5% m/full stroke ±.5% 6 m/full stroke ±.5% wiring configuration: wire wire wire input voltage: 8 vdc 9 vdc vdc hazardous area certification: not certified CS Example: { Hazardous rea Certification: ordercode = =... m CS Standard. Class = m = m Groups, B, C and D *IMPORTNT: intrinsically safe when powered from a CS certified zener barrier rated 8 VDC max, m max per installation drawing#67798 Electrical Connection: F order code: -ft. [ M] 6-pin metal connector w/mating plug 6-pin plastic connector w/mating plug 5-ft. [7.5 M] instrumentation cable IP 67, NEM X**,6 IP 67, NEM X**, 6 IP 65, NEM IP 67, NEM 6. in. [78 mm]. in. [6 mm] / - 5/6" [ - 8 mm] cable dia. 6 WG max conductor size connector: MSE-S-6P mating plug: MS6E-S-6S ft. x.-in. dia. [ M x mm dia.] -conductor, 8 WG /8-in. [9 mm] max cable dia. 6 WG max conductor size connector: MSE-S-6P mating plug: MS6E-S-6S 5 ft. x.-in. [7,5 M x 5 mm] dia. 6-conductor, WG shielded F order code: ft. [ M] -ft. [ M] pressure tested* -ft. [ M] pressure tested* IP 67, NEM X**,6 IP 68, NEM X**, 6P IP 68, NEM X**, 6P ft. x.-in. dia. [ M x mm dia.] 8 WG, ft. x.-in. dia. [ M x mm dia.] -conductor, 8 WG ft. x.-in. dia. [ M x mm dia.] -conductor, 8 WG 6-pin Mating Plug Waterproof Cable Instrumentation Cable pin -wire -wire 8... vdc***...9 vdc B... m out common C... m out D case ground B C D F E contact view color code -wire -wire WHITE 8... vdc***...9 vdc BLCK... m out common GREEN case ground... m out color code -wire -wire RED 8... vdc***...9 vdc BLCK... m out common GREEN case ground... m out Note: WHITE, BLUE, BROWN are not used. * Test pressure: feet [ meters] H O ( PSID) Test Medium: ir; Duration: hours. ** applies to stainless steel enclosure only. ***- VDC for hazardous area option. SENSOR SOLUTIONS /// PT8 PGE

4 PT8 Industrial m / m Output Signal Ordering Information (cont.): Cable Guide Options: G order code: * standard cable guide stainless steel cable guide polyurethane cable bellows integral cable brush.87 in..87 in..75 in..88 in. *note: all ranges up to 5 inches only Output Signal Selection: The output signal direction can be reversed at any time by simply changing the dip-switch settings found on the internal signal board. fter the settings have been changed, adjustment of the Zero and Span trimpots will be required to precisely match signal values to the beginning and end points of the stroke.... m or... m... m or... m output signal switch setting signal board dip-switch location internal dip switches & signal board To gain access to the signal board, remove four llen-head Screws and remove rear cover. SENSOR SOLUTIONS /// PT8 PGE

5 VLS Option - Free Release Protection The patented Celesco Velocity Limiting System (VLS) is an option for PT8 Series cable extension transducers that limits cable retraction to a safe to 55 inches per second. The VLS option prevents the measuring cable from ever reaching a damaging velocity during an accidental free release. This option is ideal for mobile applications that require frequent cable disconnection and reconnection. It prevents expensive unscheduled downtime due to accidental cable mishandling or attachment failure. VLS is NOT available for medium and high cable tension options, stainless steel enclosure, cable bellows or, 5 and 5-inch stroke ranges. How To Configure Model Number for VLS Option: VLS8 - = available options** R B C D E F G creating VLS model number (example):. select PT8 model. remove PT from the model number. add VLS. completed model number! PT8-6-- PT VLS VLS8-6-- **Note: please contact factory for a solution to options not supported. te.com/sensorsolutions Measurement Specialties Inc. a TE Connectivity company Measurement Specialties, TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. ll other logos, products and/ or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity s obligations shall only be as set forth in TE Connectivity s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. 6 TE Connectivity Ltd. family of companies ll Rights Reserved. SENSOR SOLUTIONS /// PT8 version:. // January, 7 PGE 5