Angle Seat Motor Valve 7210

Transcription

1 1/4 up to 2 Motor valve for on/off and modulating operation for neutral and aggressive media. Compact design Self calibration Unaffected by lightly contaminated media or operating temperatures from 22 up to +392 Working pressure up to 580 psi Versatile actuator options Actuators with control function also available with safety position Technical Information Valve Body material Bronze Stainless steel 316L Nominal size 1/2" up to 2" 1/4" up to 2" Connections: Pipe threads acc /2" 2" 1/4" 2" NPT thread 1/2" 2" 1/4" 2" Welding ends 1/2" 2" Clamp connections 1/2" 2" Nominal pressure 230 psi 580 psi Max. fluid temperature Viscosity Vacuum Operating pressure packing underneath 22 up to 392 max. 600 mm²/s (600 cst) max mercury (Hg) max. 175 psi Position electronics (self adapting) Actuator 180 lbf Stroke indicator Coupling Head section Valve stem , roller burnished Packing from filled PT, self adjusting Seating seal PT or alternative materials Control plug Schubert & Salzer Inc., 4601 Corporate Drive N.W., Suite 100 Concord, NC 28027, Ph.: (704) , ax: (704) info@schubertsalzerinc.com,

2 Technical Information BMMotor Actuator Type of motor BM24C BM24C/I BM24C/IOS2 BM250C/IO2 BM24 BM115 BM230 unction Control Control Control Control On/Off On/Off On/Off Nominal voltage 24 V AC/DC 24 V AC/DC 2030V AC 85250V AC 2045V DC V DC 24 V AC/DC 115 V AC 230 V AC Set point 2 10 V 4 20 ma 4 20 ma 4 20 ma 3step 3step 3step Load 100 kohm 500 Ohm 500 Ohm 500 Ohm Position feedback 2 10 V 2 10 V 4 20 ma 4 20 ma external load < 700 Ohm < 700 Ohm limit switches 2 x 2 x max. switching load 24V AC/DC 24V AC/DC 70mA 70mA Power consumption 3 W 3 W 3 W 4 W 3 W 6 W 6 W Stroking time (standard) 3.5s per 3.5s per 3.5s per 3.5s per 0.04inch 0.04inch 0.04inch 0.04inch 190 s/inch 190 s/inch 190 s/inch Thrust Class of protection Ambient temperature 800 N IP up to +140 Technical Information CAActuator unction Control On/Off Motor type CA24C CA260C CA24CR CA260CR CA24 CA260 Mains connection 24V AC/DC 90260V AC 24V AC/DC 90260V AC 24V AC/DC 90260V AC Set point range eedback Dead band Repeatability Limit switch Potentiometer feedback Max. switching capacity (0)210V / (0)420mA (0)210V / (0)420mA ±0.6% of the entire stroke ±0.3% of the entire stroke 2 24V AC/DC 200 ma (2)3term optional optional optional 250V AC/DC 1A Actuating speed 38.1 / 50.8 / 76.2 s/inch 50.8 or 76.2 s/inch (Standard: 70.8 s/inch) (Standard: 76.2 s/inch) Safety functions Monitoring of tensile force, set point, temperature of the electronics, etc. Tensile force monitoring Diagnostic functions Storage of motor and total operating time, temperature and directional classes, etc. ail Safe position freely adjustable Load 500 Ω for current set point / 95 kω for voltage set point Max. input 13 W 12 W 13 W 12 W 13 W 12 W Input heating resistor 10 W Starting current 6 A 2,5 A 6 A 2,5 A 6 A 2,5 A Actuating power Protection class (N 60529) Adm. Ambient temperature Duty cycle *: for control with voltsignal split range adjustments are possible 800 N IP to % Wiring diagrams of the actuators can be found in the manual. 2/6

3 Pressure Capability Nominal size Inlet pressure psi 1/4" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" On/off Control On/off Control On/off Control On/off Control On/off Control On/off Control On/off Control Stainless steel body Bronze body CvValues Characteristic linear equal percentage Size 1/4" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 1/4" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 100 % % % % % 0.5 7,5% 0.3 OnOff /6

4 Ordering Number System Article number 7210/ K S Nominal size: 1/4" (DN 8) only with seating seal PK 008 1/2" (DN 15) 015 3/4" (DN 20) 020 1" (DN 25) /4" (DN 32) /2" (DN 40) 040 2" (DN 50) 050 Item: Valve Valve without actuator Actuator Body design: Angle bodied 1 Connection: Whitworththread 0 NPT thread 5 without thread 6 Welding ends acc. H Triclamp Z Body material: Bronze 1 Stainless steel 2 Seating seal: PT 0 Viton 1 PDM 2 BUNAN 3 PK 7 Actuator: Control actuator BM250C/IOS V AC/120250V DC control electr. 420mA feedb. 420mA 2 limit switch. 0 Control actuator BM24C 24V AC/DC control electronics 210V feedback 210V 1 Control actuator BM24C/I 24V AC/DC control electronics 420mA feedback 210V 2 OnOff actuator BM24 24V AC/DC 6 OnOff actuator BM V AC 7 OnOff actuator BM V AC 8 Control actuator BM24C/IOS2 2030V AC/2045V DC control electr. 420mA feedback 420mA 2 limit switch. 9 Control actuator CA24C, 24V AC/DC, with pos. electronic, stanard adjustm.: control sig. 420mA, feedback 420mA, 2 C Control Actuator CA260C, 90260V 50/60Hz, with pos. electronic, Standard adjustm. 420mA, feedb. 420mA, 2 limit switc D OnOf (3point) actuator CA24, 24V AC/DC OnOff (3point) actuator CA260, 90260V, 50/60Hz Control plug: none linear 100% 1 equal percentage 100% 2 linear 40% 3 equal percentage 40% 4 linear 25% 5 equal percentage 25% 6 Safety position: without safety position spring to close 0 spring to open 1 Stroking times Standard (89 s/inch for control actuators 191 s/inch for onoffactuators) 114 s/inch (onoff actuators only) 44 s/inch (control actuators only), with safety spring return 76 s/inch L s/inch (control actuators only) s/inch (control actuators only) 3 3 s/mm (CAactuators) 4 1,5 s/mm (CAactuators) 5 Ordering example: 7210/025VK Angle seat motor valve type 7210, 1, pipe thread NPT, stainless steel body, seating seal PT, control actuator BM24C/I, 24V AC/DC, 180 lbf, control electronics 420 ma, position feedback 210V, linear characteristic, Cvvalue 16.2 (100 %). 4/6 V U A

5 Dimensions and Weights BMactuators 110 Body with threaded ends Rp/NPT SW2 SW1 B A C Body with welding ends DIN/ SW s L d1 Size A C Size B L SW1 SW2 Stroke Weight G / NPT G NPT d1 s d1 s G / NPT DIN/ lbs 1/4" 1/4" /2" 1/2" , /4" 3/4" ,55 5 1" 1" , /4" 1 1/4" , /2" 1 1/2" ,87 7 2" 2" ,87 8 Other body designs on request Dimensions in inch 5/6

6 Dimensions and Weights CAactuators Body with threaded ends Rp/NPT 129, ,8 73,1 227,5 107,3 SW1 B A C Body with welding ends DIN/ 129, ,8 73,1 227,5 107,3 SW2 SW s L d1 Size A C Size B L SW1 SW2 Stroke Weight G / NPT G NPT d1 s d1 s G / NPT DIN/ lbs 1/4" 1/4" /2" 1/2" , /4" 3/4" , " 1" , /4" 1 1/4" , /2" 1 1/2" , " 2" ,87 9 Other body designs on request Dimensions in inch 6/6 Text and pictures are not binding. We reserve the right, to alter the equipment. Data sheet 7210usa/Version: