Digital Positioner 8049

Size: px
Start display at page:

Download "Digital Positioner 8049"

Transcription

1 Compact digital positioner for pneumatic control valves. Positioner can be integrated into valve actuator (no external moving parts for stroke feedback) Wide range of strokes 0. to. inches ( 8 mm) No steadystate air consumption Selfadapting to valve actuator Configuration and diagnostic functions by PCsoftware Not sensitive to vibrations Protection class IP65 Available with ASI control Instrument air not required (filtration to 0µm) Also available for the unse in ExZone Available with integrated process controller Also for quarterturn actuators (single acting or double acting) ATEXVersions: II G Ex ia IIC T/T4 for Type 8049Ex II G Ex ia IIC T/T4 for Type 8049Ex0 ATEX Technical Information, standard versions Version 80494* 8049* 8049ASI Nominal stroke 0.. inch 0.. inch 0.. inch Voltage of the working resistance.5 V (75Ω@0mA) 6.5 V (5Ω@0mA) Supply air max. 85 psi max. 85 psi max. 85 psi Air consumption* 40 Nl/min 4 Nl/min 40 Nl/min Leakage < 0,6 Nl/h Ambient temperature 4 up to 67 F 4 up to 67 F 4 up to 67 F Control signal 0/4 0 ma Single Slave, Slave 4 0 ma opt. 0 0 V Profil S 7..4 Auxiliary energy, electric 4 VDC max 0 W none supply with ASI Adjustment of stroke and zero point selflearning Internal air consumption none Configuration with PCSoftware Air quality according ISO 857: max. particle size and density: Class 5 Class Class 5 oil content Class 4 Class Class 4 pressure dew point Class Class Class min. 0K (6 F) under ambient temperature Actuation gas Mounting to control valve Pressure supply port Protection class acc. DIN * at 7 psi pilot pressure compressed air or non flammable gases (nitrogen, CO, ) standardized mounting kits (also with optical position indicator) G /8" NPT IP 65 Schubert & Salzer Inc., 460 Corporate Drive N.W., Suite 00 Concord, NC 807, Ph.: (704) , Fax: (704) info@schubertsalzerinc.com,

2 Technical Information, exversions Version 8049Ex 8049Ex0 Nominal stroke 0.. inch 0.. inch Voltage of the working resistance 4 V (700 Ohm@0mA) 4 V (700 Ohm@0mA) Supply air max. 85 psi max. 85 psi air performance (@7psi) Leakage Adjustment of stroke and zero point Internal air consumption Configuration Air quality according ISO 857: max. particle size and density oil content pressure dew point Actuation gas Mounting to control valve Pressure supply port Protection class acc. DIN General information concerning explosionproofing Product type test certificate BVS 08 ATEX E54 BVS 08 ATEX E54 ATEX specification II G Ex ia T/T4 II G Ex ia T/T4 Product type test certificate IECEx BVS.0060 IECEx BVS.0060 IEC specification Ex ia IIC T/T4 Gb Ex ia IIC T/T4 Ga Temperature ranges T4: Tamb = 0 04 F T4: Tamb = 0 04 F T: Tamb = 0 67 F T: Tamb = 0 67 F Information concerning explosionproofing max. Input voltage Ui = DC 0V Ui = DC 0V max. Input current Ii = 00mA Ii = 00mA max. Input power Pi = 6mW Pi = 6mW max. Interior capacity Ci = insignificant Ci = insignificant max. Interior inductance Li = insignificant Li = insignificant Materials Standard version Combination possibilities 0 Nl/min. < 0,6 Nl/h selflearning none with PCSoftware Class Class Class min. 0K (6 F) under ambient temperature compressed air or non flammable gases (nitrogen, CO, ) standardized mounting kits (also with optical position G /8" NPT IP 65 Version "ground plate in stainless steel" Version "completely stainless steel" Positioner housing Vestamid (electroconductive) Vestamid (electroconductive) stainless steel Ground plate Aluminium, KTLcoated stainless steel stainless steel (4wire) version V (wire) version V7 8049Ex (exversion) version V 8049IPC with integrated process controller Standard body x x x x Ground plate in stainless steel x x x x Positioner completely in stainless steel x x x Positioner for part turn actuator single acting x x x x Positioner for part turn actuator double acting x x positioner for 50 mm stroke x x Feed back module RM x Feed back module RM x Feed back module RM4 x gauge block x x x x /9

3 Positioner with integrated PIDprocess controller module Compact solution for local controlling tasks Suitable for fast controlled systems due to a short cycle time (only 50 ms) Internal or external set point value possible LEDdisplay easy to read Analog inputs and Pt00 Configurable as P, PI, PD and PIDcontroller Class of protection IP 65 Supply voltage Sample rate Control variable Set point value Input filter control variable Alarm output Capacity alarm output Control mode Ambient temperature 4 up to 67 F Protection class IP65 4 VDC /0 %, 50 ma, max. (with positioner) 50 ms Pt00 0/4..0 ma over keyboard or 0/4...0 ma, 0/...0 V OFF: 0 ms, (Pt00: 00 ms) ON: 800 ms absolute direct/inverse, relative direct/inverse, Band direct/inverse max. 4 VAC or DC, max. 70 ma P (with working point y 0 ), PD (with working point y 0 ), PI, PID Connection example Pt00 Positioner 8049 IPC Pt00 screw terminals B (IPCPlate) screw terminals A (PositionerPlate) 4V DC U I 0/4... 0mA max 4V AC/DC 4 Alarm 4 # external set point output 5 5 max 70mA Connection examplel masensor Positioner 8049 IPC screw terminals B (IPCPlate) screw terminals A (PositionerPlate) 4V DC U I 0/4... 0mA 4 5 external set point Alarm output 4 5 max 4V AC/DC max 70mA # I 0/4... 0mA /9

4 Accessories Analogue feedback modules Feedback on current valve position Feedback signal does not require calibration Easy to retrofit Analogue feedback module RM Feedback for 4 wire design electrically isolated limit signal transmitters Limit signal transmitters freely adjustable (000%) with potentiometer Binary input 4V Technical Information Supply voltage 4V DC (±0%) Output signal 4 0 ma Max. adm. working resistance < 700 Ohm Temperature range F Limit signal transmitters pieces Switching range adjustable 000% Switching capacity of the limit sign.trans. 4V AC/DC, 70mA Switching hysteresis ca..5% Feedback module RM Feedback for 4 wire design limit signal transmitters according NAMUR (EN ) Limit signal transmitters freely adjustable (000%) with software DeviceConfig Technical Information Output signal 4 0 ma Internal load < 7,6V (80 Ω) Temperature range F Limit signal transmitters pieces Switching range adjustable 000% Switching hysteresis ca..5% Feedback module RM4 Feedback for wire design limit signal transmitters according NAMUR (EN ) Limit signal transmitters freely adjustable (000%) with software DeviceConfig Technical Information Output signal 4 0 ma Internal load < 8V (400 Ω) Temperature range F Limit signal transmitters pieces Switching range adjustable 000% Switching hysteresis ca..5% 4/9

5 Accessories Gauge Block Gauge block between positioner and connection block Pressure range 0 87 psi (0 6 bar) Easy field retrofit optical position indication for quarterturn actuators Housing Versions Standard version Completely stainless steel Ground plate in stainless steel 5/9

6 Basic design dig. positioner (version 5) dig. positioner 8049 dig. positioner 8049Ex dig. positioner 8049Ex0 quote only if required 8049/ S 4P5 P7 EP 0P For acutator single acting double acting Air delivery low standard high Body aluminium / plastic 0 stainless steel ground plate body in stainless steel Electropneumatic connection cable bushing x M6x,5 0 NPTthread /" plug connection Mx, 5pin Pneumatic connection G /8" 0 NPT /8" Position measuring linear potentiometer without sensing pin linear potentiometer with standard sensing pin (L=,9") linear potentiometer with curtated sensing pin (L=,7") rotary potentiometer for semirotary drive EMVgalvanic separating module for exterior path sensor Optical indicator without indicator indicator disc for sensing pin in PA indicator disc for sensing pin in metal rotation angle indicator Auxiliary module without auxiliary module intelligent feedback modul RM with two limiting value encoders intelligent feedback modul RM with two limiting value encoders according NAMUR IPCprocess controller ASI Accessories without accessories 0 gauge bloc single acting, scaling in bar and PSI optical position indicator for rotating actuators Further details special design (quote only if required) positioner montage (only for the manufacturer) Settings standard settings on customer request Special design without separated version incl. exterior path sensor for lift drive special design for ex zone (dust) 6/9 L S H 0 G 0 0 C A S M

7 Dimensions For linear actuators 4,5 0, 0,08 0,94 A P NPT/8",9 4,76,,56,6 For quarterturn actuators 4.5" /" NPT 0.69" Y only at doubleacting version.0".0" Y P /8" NPT 0.98" 5." 7/9

8 ConfigurationSoftware DeviceConfig SetupParameters Adjustment of control parameters (input signal, stroke limitation, closing function, control hysteresis, valve function, etc.) Flow Characteristic Adjustment of flow and display of various flow related functions. 8/9

9 ConfigurationSoftware DeviceConfig Diagnostic data Informations of valve stroke,running time, soft and hardwareversions, achieved temperature and stroke levels, error messages, number of cycles, operating hours... application example Positioner 8049 top mounted on GSControl Valve Model 80 Positioner 8049 top mounted on Aseptic Right Angle Control Valve Model 60 with stainless steel body Text and pictures are not binding. We reserve the right, to alter the equipment. Data sheet 8049usa/Version: /9

Digital Positioner 8049

Digital Positioner 8049 Compact digital positioner for pneumatic control valves. Positioner can be integrated into valve actuator (no external moving parts for stroke feedback) Wide range of strokes 0. to. inches ( 8 mm) No steadystate

More information

AS-I

AS-I Digital Positioner 8049 Compact digital positioner for pneumatic control valves. Positioner can be integrated into valve actuator (no external moving parts for stroke feedback) Wide range of strokes 3-8

More information

AS-I

AS-I Digital Positioner 8049 Compact digital positioner for pneumatic control valves. Positioner can be integrated into valve actuator (no external moving parts for stroke feedback) Wide range of strokes 3-8

More information

Angle Seat Motor Valve 7210

Angle Seat Motor Valve 7210 1/4 up to 2 Motor valve for on/off and modulating operation for neutral and aggressive media. Compact design Self calibration Unaffected by lightly contaminated media or operating temperatures from 22

More information

Angle Seat Control Valve 7020

Angle Seat Control Valve 7020 Angle Seat Control Valve 72 DN 8 up to DN 8 PN 4 Pneumatically operated control valves for neutral through to highly aggressive media. Integrated positioner Compact design All parts contacting the fluid

More information

Motor Valve GS 3 series 1/2 up to 10

Motor Valve GS 3 series 1/2 up to 10 Motor Valve 8038 GS 3 series 1/2 up to 10 Fast and high resolution motorvalve for control and switching of neutral through to highly aggressive media in process engineering, chemical industries and for

More information

Positioners Converters Limit Switches Position Transmitters Solenoid Valves Accessories. Selection and Application

Positioners Converters Limit Switches Position Transmitters Solenoid Valves Accessories. Selection and Application Positioners Converters Limit Switches Position Transmitters Solenoid Valves Accessories Selection and Application Associated s T 8355 EN ff. Edition January 2010 Information Sheet T 8350 EN Positioners,

More information

Control Valve GS 3 series 1/2 up to 10. Materials

Control Valve GS 3 series 1/2 up to 10. Materials Control Valve 8021 GS 3 series 1/2 up to 10 Pneumatic control valve with integrated positioner for the control of neutral and aggressive fluids. Ideal for steam and flashing liquids. Integral top mount

More information

AP ATEX AIRPOWER POSITIONERS AP2000 FEATURES AP1000 & AP1200 FEATURES OPTIONS OPTIONS

AP ATEX AIRPOWER POSITIONERS AP2000 FEATURES AP1000 & AP1200 FEATURES OPTIONS OPTIONS AP1000-2000 Airpower positioners are a robust range of rotary or linear valve positioners in AP1000 electro-pneumatic (4-20mA), AP1200 pneumatic (3-15 psi) or AP2000 programmable smart type. Designed to

More information

Control Valve GS 3 series 1/2 up to 10. material

Control Valve GS 3 series 1/2 up to 10. material Control Valve 8021 GS 3 series 1/2 up to 10 Pneumatic control valve with integrated positioner for the control of neutral and aggressive fluids. Ideal for steam and flashing liquids. Integral top mount

More information

Series 60. New Smart Positioner. Compact design Convenient & powerful function Enhanced reliability

Series 60. New Smart Positioner. Compact design Convenient & powerful function Enhanced reliability Series 60 New Smart Positioner Compact design Convenient & powerful function Enhanced reliability J Flow Controls, LLC 14 De Camp Cincinnati, OH 45216 Phone: 513-731-2900 Fax 513-731-6939 www.jflowcontrols.com

More information

Control Valve 8021 with integrated positioner

Control Valve 8021 with integrated positioner Control Valve 8021 GS 3 series DN 15 up to DN 200 Pneumatic control valve for the control of neutral and aggressive fluids Space saving wafer type construction Lowest possible weight Quiet operation Fast

More information

Series 3730 Electropneumatic Positioner Type

Series 3730 Electropneumatic Positioner Type Series 3730 Electropneumatic Positioner Type 3730-1 Application Single-acting or double-acting positioner for attachment to pneumatic control valves. Self-calibrating, automatic adaptation to valve and

More information

Motor Valve compact 8230

Motor Valve compact 8230 Motor Valve compact 8230 GS 3 series 1/2 up to 2 Motor valve for control and switching of neutral through to highly aggressive media in process engineering, chemical industries and for plant equipment.

More information

Angle Seat Valves by Schubert & Salzer

Angle Seat Valves by Schubert & Salzer Angle Seat Valves by Schubert & Salzer Angle seat valves contact factory Angle seat valves Angle Seat Valve 7010, reinforced design stainless steel 2" up to 3" 580 psi diaphragm actuator, stainless steel

More information

Electronic Limit Switch Type

Electronic Limit Switch Type Electronic Limit Switch Type 3738-20 with optional solenoid valve for on/off rotary actuators Application Electronic limit switch for on/off applications to indicate the end position of rotary actuators.

More information

SS3 Linear / Rotary. Smart Valve Positioner. Smart performance with innovative and ever-strong coil drive even under harsh working environments

SS3 Linear / Rotary. Smart Valve Positioner. Smart performance with innovative and ever-strong coil drive even under harsh working environments Smart Valve Positioner SS3 Linear / Rotary Smart performance with innovative and ever-strong coil drive even under harsh working environments Easy and quick auto-calibration Detecting RA (reverse acting)

More information

Control Valve fluids with integrated positioner. GS 3 series - DN 15 up to DN 250. material

Control Valve fluids with integrated positioner. GS 3 series - DN 15 up to DN 250. material Control Valve 8021 with integrated positioner GS 3 series - DN 15 up to DN 250 Pneumatic control valve for the control of neutral and aggressive fluids with integrated positioner Space saving wafer type

More information

4.3 MSK SWITCH BOX MSK (SIZE I) FEATURES ADVANTAGES

4.3 MSK SWITCH BOX MSK (SIZE I) FEATURES ADVANTAGES SWITCH BOX MSK (SIZE I) FEATURES - A compact, robust switch box to be mounted on pneumatic actuators - Position response via integrated micro limit switches - Integrated terminal Strip - The micro limit

More information

Versions. Version with K VS Version with K VS 2.0. Fig. 1: Type 3967 Solenoid Valve

Versions. Version with K VS Version with K VS 2.0. Fig. 1: Type 3967 Solenoid Valve Type 367 Solenoid Valve Application Solenoid valve for controlling pneumatic linear actuators with NAMUR rib according to IEC 60534 or pneumatic rotary actuators with NAMUR interface according to VDI/VDE

More information

System Electropneumatic Converters (Proportional Valves) Electronic Process Controllers Signal Converters

System Electropneumatic Converters (Proportional Valves) Electronic Process Controllers Signal Converters System 6000 Electropneumatic Converters (Proportional Valves) Electronic Process Controllers Signal Converters Edition April 2018 Information Sheet T 6000 EN Electropneumatic Converters i/p converters

More information

Operating Instructions. Pneumatic Control Valve Low Temperature. Type Series GS3

Operating Instructions. Pneumatic Control Valve Low Temperature. Type Series GS3 Operating Instructions Pneumatic Control Valve Low Temperature Type 8026 Series GS3 With: Digital Positioner Type 8048 Electro-pneumatic Positioner Type 8047 Pneumatic Positioner Type 8047 Version: 03/2006

More information

System 6000 Electropneumatic Converter for Direct Current Signals Type 6116 i/p Converter

System 6000 Electropneumatic Converter for Direct Current Signals Type 6116 i/p Converter System 6000 Electropneumatic Converter for Direct Current Signals Type 6116 i/p Converter Application Used to convert a direct-current input signal into a pneumatic output signal for measuring and control

More information

Operating Instructions. Angle Seat Control Valve. Type 7020

Operating Instructions. Angle Seat Control Valve. Type 7020 Operating Instructions Angle Seat Control Valve Type 7020 With: Digital Positioner Type 8048 Electro-pneumatic Positioner Type 8047 Pneumatic Positioner Type 8047 Version: 02/2006 Manual-7020e.doc Art.-No:

More information

Type Installation, Operation and Maintenance Instructions. Ordering Information. Contents CA20 -

Type Installation, Operation and Maintenance Instructions. Ordering Information. Contents CA20 - Type 2000 Pneumatic and Electropneumatic Valve Positioner Installation, Operation and Maintenance Instructions Ordering Information Use this coding system to order Model CA20 - Type of Positioner 00 P/P

More information

Intelligent Positioner

Intelligent Positioner Intelligent Positioner Construction The digital electro-pneumatic positioner detects the valve position with an external long life travel sensor. It possesses a solid housing with protected operating keys.

More information

3/2 - Way Motor Valve 7280

3/2 - Way Motor Valve 7280 1/2 up to 1 1/2 3/2Way Compact Motor Valve for distributing function, mixing function and modulating operation for neutral and aggressive media Compact design Self calibration Unaffected by lightly contaminated

More information

Pressure Regulator compact 8011

Pressure Regulator compact 8011 Pressure Regulator compact 8011 GS 3 series 1/2 up to 6 Self operated regulation of inlet and outlet pressures of neutral through to highly aggressive media in process engineering, chemical industries

More information

TopControl Continuous

TopControl Continuous 860 Electropneumatic positioner for pneumatically actuated control valves Type 860 can be combined with... Type 7 Type 70 Types 70/7/7K Type 800 Piston-controlled globe valve Piston-controlled angle seat

More information

Right Angle Control Valve 7051

Right Angle Control Valve 7051 Right ngle Control Valve 7051 15 up to 50 PN 40 Pneumatically operated valve for control loops with neutral up to highly aggressive media Integrated positioner Compact design ll parts in contact with medium

More information

Electropneumatic positioner APIS

Electropneumatic positioner APIS Electropneumatic positioner APIS HART protocol ATEX certificate II 2G Exia IIC T6/T5 Gb II 2G Exia IIC T6/T5/T4 Gb version with Hart Simple in installation and programming Possibility of remote assembling

More information

FasTrak High Capacity Smart Positioner

FasTrak High Capacity Smart Positioner FasTrak High Capacity Smart Positioner 2 CCI provides the next level of control valve performance CCI provides the next level of control valve performance with FasTrak, a high capacity digital positioner

More information

V200 Series Positioners

V200 Series Positioners V200 Series Positioners In a single compact and rugged housing The V200 positioner incorporates the flexibility of converting from a pneumatic unit to several versions of an electropneumatic unit, and

More information

Globe Valve System for continuous control. Type 8802/2301 electro-pneumatically operated globe valve + = TWO YEAR WARRANTY on this valve system

Globe Valve System for continuous control. Type 8802/2301 electro-pneumatically operated globe valve + = TWO YEAR WARRANTY on this valve system Globe Valve System for continuous control Type 8802/2301 electro-pneumatically operated globe valve + = TWO YEAR WARRANTY on this valve system Burkert Type 8802/2301 + = Type 2301 Series Globe valve Type

More information

3/2 - Way Valve with metal actuator 1/2 up to 1 1/2. Technical Information

3/2 - Way Valve with metal actuator 1/2 up to 1 1/2. Technical Information 3/2 - Way Valve 78 with metal actuator /2 up to /2 Pneumatically operated 3/2-way valve for the control of neutral and slightly aggressive media. (Stainless steel version, data sheet Type 78) ompact design

More information

Intrinsically safe presure transmitters for hazardous environments Type MBS 4201, MBS 4251, MBS 4701 and MBS Technical brochure

Intrinsically safe presure transmitters for hazardous environments Type MBS 4201, MBS 4251, MBS 4701 and MBS Technical brochure Intrinsically safe presure transmitters for hazardous environments Type MBS 4201, MBS 4251, MBS 4701 and MBS 4751 Technical brochure Features Ex ll 1G EEx ia llc T4 - T6 in compliance with ATEX 100a Applicable

More information

Type Electronic Limit Switch

Type Electronic Limit Switch Type 3738-20 Electronic Limit Switch With optional solenoid valve Application Electronic limit switch for on/off applications to indicate the end position. Optionally with integrated solenoid valve. Special

More information

POSITIONERS and Controls for Complete Valve Automation

POSITIONERS and Controls for Complete Valve Automation CONTROLS A Division of AT Controls Pneumatic & Electro-Pneumatic POSITIONERS and Controls for Complete Valve Automation 1 SS SERIES SS Features Easy and quick auto-calibration Detecting RA (reverse acting)

More information

Aseptic Right Angle Valve 6051 with EHEDG-Certification DN 15 up to DN 50

Aseptic Right Angle Valve 6051 with EHEDG-Certification DN 15 up to DN 50 Aseptic Right Angle Valve 6051 with EHEG-Certification 15 up to 50 Pneumatic control valve in right angle design with integrated microporcessor positioner type 8049 or as a shut-off valve for applications

More information

Control Valve with integrated positioner

Control Valve with integrated positioner Control Valve 8021 with integrated positioner GS 1 series DN 15 up to DN 150 Pneumatic control valve for the control of neutral through to highly aggressive media in process engineering, chemical industries

More information

JUMO dtrans p20. Process pressure transmitter. Type Brief description. Key features. Block diagram

JUMO dtrans p20. Process pressure transmitter. Type Brief description. Key features. Block diagram Data Sheet 403025 Page 1/10 JUMO dtrans p20 Process pressure transmitter Brief description The JUMO dtrans p20 pressure transmitter with HART interface combines maximum precision with easy operation. It

More information

3/2-way Rocker Solenoid Valve for pneumatic systems

3/2-way Rocker Solenoid Valve for pneumatic systems 3/-way Rocker Solenoid Valve for pneumatic systems EEx ia versions Direct-acting High cycling rate Reduced power consumption Type 6104 can be combined with... Sub-base connection Approvals: Type 654 Servo-assisted

More information

3/2-Way Motor Control Valve 7382 DN 15 up to DN 50

3/2-Way Motor Control Valve 7382 DN 15 up to DN 50 3/2-Way Motor Control Valve 7382 15 up to 50 Fast and high resolution motorvalve for control and switching of neutral through to highly aggressive media in process engineering, chemical industries and

More information

Fisher i2p 100 Electro Pneumatic Transducer

Fisher i2p 100 Electro Pneumatic Transducer Product Bulletin D103197X012 i2p 100 Transducer Fisher i2p 100 Electro Pneumatic Transducer The Fisher i2p 100 electro pneumatic transducer, shown in figure 1, uses a converter module that converts a milliampere

More information

Intelligent Positioner

Intelligent Positioner Intelligent Positioner Construction The GEMÜ 1 µpos is a digital electro-pneumatic positioner for process valve control. Designed for simple, safe and quick use with valves with strokes < mm. The positioner,

More information

APS & APIS ATEX AIRPOWER SWITCH BOXES FEATURES DESCRIPTION

APS & APIS ATEX AIRPOWER SWITCH BOXES FEATURES DESCRIPTION page 1 DESCRIPTION The switch boxes are suitable for rotary actuators and are the industry leader in versatility, quality and approvals gained. Models include APS standard range with a variety of outputs

More information

SS2 Linear / Rotary Smart Valve Positioner

SS2 Linear / Rotary Smart Valve Positioner COTROLS A Division of AT Controls Smart performance with innovative and ever-strong coil drive even under harsh working environments Also available in REMOTE TYPE 316 STAILESS STEEL BODY Smart performance

More information

Sentronic PLUS 614 Series

Sentronic PLUS 614 Series Sentronic PLUS 64 Series Proportional Technology www.asco.com PRESSURE CONTROL: 64 SERIES SENTRONIC PLUS Sentronic PLUS Sentronic PLUS is a digitally operated pressure regulator valve. This valve accurately

More information

Type Type 1001 Transducers. I/P & E/P Transducers

Type Type 1001 Transducers. I/P & E/P Transducers Type 1001 I/P & E/P Description The Type 1001 is a patented family of electropneumatic instruments that is used to reduce a supply pressure to a regulated output pressure which is directly proportional

More information

Corrosion Resistant Pneumatic Positioners Model 4700P and 4700E

Corrosion Resistant Pneumatic Positioners Model 4700P and 4700E Corrosion Resistant Pneumatic Positioners Specification Data CS2007 4/98 Table of Contents Foreword............................................................. 2 Numbering System.....................................................

More information

Intelligent Positioner

Intelligent Positioner Intelligent Positioner Construction The GEMÜ epos digital electro-pneumatic positioner detects the valve position via its external LongLife travel sensor. It has a solid housing with protected operating

More information

Pneumatic Positioner Type 3766 Electropneumatic Positioner Type 3767

Pneumatic Positioner Type 3766 Electropneumatic Positioner Type 3767 Pneumatic Positioner Type 3766 Electropneumatic Positioner Type 3767 Application Single-acting or double-acting positioners for attachment to pneumatic control valves. Supplied with a pneumatic input signal

More information

Solenoid Valve Island Type 3965

Solenoid Valve Island Type 3965 Solenoid Valve Island Type 365 for the control of pneumatic actuators General The Type 365 Solenoid Valve Island is a compact solution for the centralized control of pneumatic actuators in chemical and

More information

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics /-, 5/- 5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx

More information

Field instrumentation. Electropneumatic units. as I/P converters and positioners

Field instrumentation. Electropneumatic units. as I/P converters and positioners Electropneumatic units as I/P converters and positioners I/P converter TEIP 11, millionfold approved Analogue positioner TZIM, robust and low-cost concept Intelligent positioner - TZID for top level demands

More information

Integrated Control modules

Integrated Control modules .60.0 Rev. 0 Page of 9 Integrated Control modules QC, QC2 and QC Features: - Basic actuator functions for: - Spring return applications, or - Double acting applications or, - Double acting Fail in Last

More information

3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve

3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve 3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for

More information

Installation and Operating Instructions Electro-Pneumatic Rotary Positioner SP-21. Description of Device. Part Number System

Installation and Operating Instructions Electro-Pneumatic Rotary Positioner SP-21. Description of Device. Part Number System Description of Device VALMAC Posi-Zest SP-2100 Series is the advanced control device for a rotary control valve that provides unparalleled stability in difficult environments. Easy Maintenance Precise

More information

T 3965 EN Type 3965 Solenoid Valve Island To control pneumatic actuators

T 3965 EN Type 3965 Solenoid Valve Island To control pneumatic actuators T 365 EN Type 365 Solenoid Valve Island To control pneumatic actuators Application The Type 365 Solenoid Valve Island is a compact solution for the central control of pneumatic actuators in chemical and

More information

V200 Series Positioners

V200 Series Positioners V200 Series Positioners In a single compact and rugged housing The V200 positioner incorporates the flexibility of converting from a pneumatic unit to several versions of an electropneumatic unit, and

More information

Material pressure (bar) (Cv (US) kv x 1,2 Seat. N/en

Material pressure (bar) (Cv (US) kv x 1,2 Seat. N/en 00 / poppet valves electromagnetic actuated, directly controlled, / NPT or flanged with NAMUR Interface TÜV-approval based on IEC 6 8, DIN V Valves for safety systems up to SIL Solenoid valve also suitable

More information

Linear actuators DFPI

Linear actuators DFPI Linear actuators DFPI Linear actuators DFPI Key features General information Linear actuator for actuating process valves such as gate valves and shut-off valves in process automation systems Linear actuator

More information

SPT- I / U PRESSURE TRANSMITTER for general applications

SPT- I / U PRESSURE TRANSMITTER for general applications Fields of application Design Examples Hydraulics Air conditioning and heating Testing technology Industrial robots Process controlling Water technology Pneumatics Description The pressure transmitters

More information

2/2-way Globe Control Valve, threaded port connection, DN 10-65

2/2-way Globe Control Valve, threaded port connection, DN 10-65 2/2-way Globe Control Valve, threaded port connection, DN 10-65 Type 2712 can be combined with... Classic design with interchangeable trims, 3 to 5 Kvs-value per connection port Excellent control characteristic

More information

ARCAPRO positioner. Positioner customized for specific tasks

ARCAPRO positioner. Positioner customized for specific tasks ARCAPRO ARCAPRO Positioner customized for specific tasks 2 3 1 A linear function between the input signal and stroke is the best way to ensure maximum control precision. Control valves with pneumatic actuators,

More information

Type 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518

Type 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518 3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics Type 658 standard standard High flow-rate capacity Reduced power consumption Single or manifold mounting Standard-, EEx m and EEx i versions

More information

2/2 way Globe Control Valve, threaded connection, 3/8" 3"

2/2 way Globe Control Valve, threaded connection, 3/8 3 2/2 way Globe Control Valve, threaded connection, 3/8" 3" Complete Burkert system using Type 2712 with TopControl 8630 New generation with interchangeable trims, 3 to 5 Cvs value per connection port Excellent

More information

97100 NAMUR. Technical data

97100 NAMUR. Technical data 9700 NAMUR /2-, /2- and / Directional control valves Actuation: electromagnetic Indirectly controlled soft seal spool valves Port size: G /4, /4 NPT NAMUR Interface For single and double operated actuators

More information

Flap-Type Flow Meter Prall

Flap-Type Flow Meter Prall Suitable for H 2 O, acids, alkaline solutions and gases Spring-loaded flap Horizontal or vertical direction of flow Largely independent of viscosity Limit contacts, optional Analog output 4 20 ma, optional

More information

Material pressure (bar) (Cv (US) kv x 1,2 Seat

Material pressure (bar) (Cv (US) kv x 1,2 Seat 00 / way poppet valves electromagnetic actuated, directly controlled G /, / NPT or flanged with NAMUR Interface TÜV-approval based on IEC 6 08, DIN V 9 Valves for safety systems up to SIL Solenoid valve

More information

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics /2-, 5/2-5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx

More information

PRESSURE TRANSMITTER PYRP-28 INDUSTRIAL & INTRINSICALLY SAFE PRESSURE TRANSMITTER PRESSURE TRANSMITTER

PRESSURE TRANSMITTER PYRP-28 INDUSTRIAL & INTRINSICALLY SAFE PRESSURE TRANSMITTER PRESSURE TRANSMITTER PRESSURE PYRP-28 INDUSTRIAL & INTRINSICALLY SAFE PRESSURE The PYRP-28 pressure transmitter is suitable for the measurement of pressure, vacuum and absolute pressure of gases, vapours and liquids for industrial

More information

Motor Valve GS 1 series, DN 15 up to DN 150

Motor Valve GS 1 series, DN 15 up to DN 150 Motor Valve 8036 GS 1 series, DN 15 up to DN 150 Motor valve for control and switching of neutral through to highly aggressive media in process engineering, chemical industries and for plant equipment.

More information

Remote Process Actuation Control System AirLINE - Siemens ET 200S

Remote Process Actuation Control System AirLINE - Siemens ET 200S Remote Process Actuation Control System AirLINE - Siemens ET 200S Type 8644 can be combined with... Fully compatible with Siemens ET 200S Combination of Fieldbus, pilot valves and I/O modules High flexibility

More information

TECHNICAL BULLETIN. Logix 510si Series Digital Positioner. Experience In Motion FCD LGENTB /09

TECHNICAL BULLETIN. Logix 510si Series Digital Positioner. Experience In Motion FCD LGENTB /09 Logix 510si Series Digital Positioner TECHNICAL BULLETIN FCD LGENTB0510-01 09/09 Experience In Motion Introduction The Logix 510si series are single acting, user-friendly digital positioners. As all positioners

More information

JUMO dtrans p20 DELTA

JUMO dtrans p20 DELTA Data Sheet 403022 Page 1/9 JUMO dtrans p20 DELTA Differential pressure transmitter Brief description The JUMO dtrans p20 DELTA differential pressure transmitter with HART interface combines maximum precision

More information

NAMUR FLANGE: With integrated exhaust air recirculation Ordering information

NAMUR FLANGE: With integrated exhaust air recirculation Ordering information 00 TÜV-approval based on IEC 6 08, DIN V 9 Approvals: DIN EN 6/9 DVGW, group Rm and EN 6 Valves for safety systems to SIL or AK 7 / Directional control valves Actuation: electromagnetic Directly controlled

More information

SRD998 Intelligent Positioner with HART Communication

SRD998 Intelligent Positioner with HART Communication Product Specifications 08.2016 -v4 PSS EVE0108 A-(en) SRD998 Intelligent Positioner with HART Communication The intelligent positioner SRD998 is designed to operate pneumatic valve actuators and can be

More information

V200 Positioner. V200 P Pneumatic Positioner. V200 E Electropneumatic Positioner. Housing Material: Cast aluminium with polyester coating

V200 Positioner. V200 P Pneumatic Positioner. V200 E Electropneumatic Positioner. Housing Material: Cast aluminium with polyester coating V200 Positioner Housing Material: Cast aluminium with polyester coating Indicator Options: Flat pointed indicator or raised indicator (red/green or yellow/black) One housing for pneumatic or electropneumatic

More information

Moniteur INSTALLATION & OPERATING INSTRUCTIONS. SERIES 40 Positioners. Installation and Operating Instructions Series 40 Positioners.

Moniteur INSTALLATION & OPERATING INSTRUCTIONS. SERIES 40 Positioners. Installation and Operating Instructions Series 40 Positioners. INSTALLATION & OPERATING INSTRUCTIONS SERIES 40 Positioners Form IO2-0406 Description of Device Moniteur's Series 40 pneumatic (3-15psi) and electropneumatic (4-20mA) positioners are advanced control devices

More information

For single and double operated actuators. Exhaust air recirculation (3/2 way function)

For single and double operated actuators. Exhaust air recirculation (3/2 way function) For single and double operated actuators /-, 5/- and 5/ Directional Control Valves Actuation: Electromagnetic Indirectly controlled soft seal spool valves Connection G /4 or /4 NPT NAMUR interface Exhaust

More information

Series 430 Type 3430 Pneumatic Indicating Controller for Temperature with Capillary Sensor Type 3432 Controller Station Type 3436 Transmitter Module

Series 430 Type 3430 Pneumatic Indicating Controller for Temperature with Capillary Sensor Type 3432 Controller Station Type 3436 Transmitter Module Series 430 Type 3430 Pneumatic Indicating Controller for Temperature with Capillary Sensor Type 3432 Controller Station Type 3436 Transmitter Module Application Temperature controller for process engineering

More information

SMART VALVE POSITIONER 4 to 20 ma + HART Digital Communication. smar B87

SMART VALVE POSITIONER 4 to 20 ma + HART Digital Communication. smar B87 SMART VALVE POSITIONER to ma + HART Digital Communication B87 DESCRIPTION The FY microprocessor based positioner provides fast and accurate positioning of diaphragm or cylinder actuators. The FY produces

More information

Accessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves

Accessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves Accessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves Complete modular designed accessory program More for less - optimal configuration costs Easy maintenance and commissioning

More information

Type 4746 Electric or Pneumatic Limit Switch

Type 4746 Electric or Pneumatic Limit Switch Type 4746 Electric or Pneumatic Limit Switch Application Limit switches with inductive, electric or pneumatic contacts for attachment to pneumatic or electric control valves, to Type 4763 Electropneumatic

More information

Pneumatic control unit for decentralized automation of ELEMENT process valves

Pneumatic control unit for decentralized automation of ELEMENT process valves 890 Pneumatic control unit for decentralized automation of ELEMENT process valves Type 890 can be combined with... Compact design Integrated pilot valve with manual override Integrated control air routing

More information

Solenoid Valves Type 3963

Solenoid Valves Type 3963 Mounting and Operating Instructions Solenoid Valves Type 3963 Fig. 1 General Assembly, commissioning and operation of these devices may only be performed by experienced personnel. Proper shipping and appropriate

More information

Product overview valve technology

Product overview valve technology Product overview valve technology precise innovative Precision - Made in Germany As a fast growing high-tech company, Schubert & Salzer Control Systems GmbH develops, produces and distributes highly precise

More information

+ = Angle-seat Valve System for continuous control. Type 8802/2300 electro-pneumatically operated angle-seat valve

+ = Angle-seat Valve System for continuous control. Type 8802/2300 electro-pneumatically operated angle-seat valve Angle-seat Valve System for continuous control Type 8802/2300 electro-pneumatically operated angle-seat valve + = TWO YEAR WARRANTY on this valve system Burkert 8802 continuous control valve + = 2300 series

More information

Metal tube flowmeters Series M21 Variable area flowmeter for low flows of liquids, gases and steam

Metal tube flowmeters Series M21 Variable area flowmeter for low flows of liquids, gases and steam Metal tube flowmeters Series M21 Variable area flowmeter for low flows of liquids, gases and steam Metallic tube with a robust construction Indication by means of magnetic coupling Scales calibrated in

More information

VALVE ACCESSORIES & CONTROLS V200 POSITIONER A POSITIONER THAT OFFERS IT ALL IN ONE COMPACT, SIMPLE, HOUSING

VALVE ACCESSORIES & CONTROLS V200 POSITIONER A POSITIONER THAT OFFERS IT ALL IN ONE COMPACT, SIMPLE, HOUSING VALVE ACCESSORIES & CONTROLS V200 POSITIONER A POSITIONER THAT OFFERS IT ALL IN ONE COMPACT, SIMPLE, HOUSING WWW.VACACCESSORIES.COM 205-678-0507 The V200 Positioner Internal I/p with simple loop test points.

More information

Electro-Pneumatic Linear Positioner Installation and Operation Instructions B GB

Electro-Pneumatic Linear Positioner Installation and Operation Instructions B GB Installation and Operation Instructions 99.66.02-B GB Description of Device (4-~20mA) is the advanced control device for a linear control valve that provides unparalleled stability in difficult environments

More information

High Temperature Valve 8024

High Temperature Valve 8024 High Temperature Valve 8024 with integrated positioner GS 3 series DN15 up to DN250 Pneumatic control valve with integrated positioner for the control of neutral through to highly aggressive media Space

More information

TZIM. Electropneumatic Analog Positioner 10/ EN

TZIM. Electropneumatic Analog Positioner 10/ EN TZIM Electropneumatic Analog Positioner EP001XA.tif Q Convenient, simple design Q Easy to handle Q User-friendly operation, easy to understand Q Reliable concept, I/P conversion through the 500,000 times

More information

M-100X. Explosion Proof Adjustable Flow Switch with Right Angle Flow. Key Features. Description. Operating Principle. Applications

M-100X. Explosion Proof Adjustable Flow Switch with Right Angle Flow. Key Features. Description. Operating Principle. Applications Explosion Proof Adjustable Flow Switch with Right Angle Flow Key Features Field adjustable Infinite flow range Extremely accurate and sensitive Low pressure drop UL recognized for hazardous location ATEX

More information

TECHNICAL BULLETIN. Logix 505si Series Digital Positioner. Experience In Motion FCD LGENTB /13

TECHNICAL BULLETIN. Logix 505si Series Digital Positioner. Experience In Motion FCD LGENTB /13 Logix 505si Series Digital Positioner TECHNICAL BULLETIN FCD LGENTB0505-03 09/13 Experience In Motion Introduction The Logix 505si is a basic positioner for most simple control loops. It is microprocessor

More information

Features. Flexibility

Features. Flexibility The V100 positioner can be ordered as a base model pneumatic positioner, converted to standard NEMA 4X electropneumatic, EX model, or FF (fail freeze) model in a matter of minutes, without removing the

More information

TECHNICAL BULLETIN. Logix 520MD Series Digital Positioner. Experience In Motion FCD LGENTB /09

TECHNICAL BULLETIN. Logix 520MD Series Digital Positioner. Experience In Motion FCD LGENTB /09 Logix 520MD Series Digital Positioner TECHNICAL BULLETIN FCD LGENTB0520-01 11/09 Experience In Motion Introduction The Logix 520MD Series combines superior positioning and tuning functions with convenient

More information

Inline Flow meter for compressed air and gases DN15 (1/2 ) - DN80 (3 )

Inline Flow meter for compressed air and gases DN15 (1/2 ) - DN80 (3 ) EE771/EE772 Inline Flow meter for compressed air and gases DN15 (1/2 ) - DN80 (3 ) The inline flow meter EE771/EE772, based on the measurement principle of thermal mass flow, is ideally suited for the

More information

Integrated Control modules

Integrated Control modules .604.0 - Rev: 6, Page of Integrated Control modules QC4, QC42 and QC43 Features: - Basic actuator functions for: - Spring return applications, or - Double acting applications or, - Double acting Fail in

More information