AS-I
|
|
- Ferdinand Lyons
- 5 years ago
- Views:
Transcription
1 Digital Positioner 8049 Compact digital positioner for pneumatic control valves. Positioner can be integrated into valve actuator (no external moving parts for stroke feedback) Wide range of strokes 3-8 mm No steady-state air consumption Self-adapting to valve actuator Configuration by PC-software Not sensitive to vibrations Protection class IP65 Available with AS-I control No instrumental air required (filtration to 0µm satisfy) Also available for the use in Ex-Zone ATEX-Versions: II G Ex ia IIC T3/T4 for Type 8049-Ex II G Ex ia IIC T3/T4 for Type 8049-Ex-0 Technical Information, standard versions Version AS-I nominal stroke 3-8 mm 3-8 mm 3-8 mm voltage of the working resistance, V 4 V (700 Ohm@0mA) - auxiliary energy, pneumatic 4-6 bar 4,5-6 bar 4-6 bar air delivery* linear drive 50 Nl/min. according the version 50 Nl/min. ambient temperature -0 up to +75 C -0 up to +75 C - 0 up to +75 C control signal 0/4-0 ma 4-0 ma Single Slave, Slave Profil S auxiliary energy, electric 4 VDC none supply with AS-I adjustment of stroke and zero point internal air consumption configuration air quality Actuation gas mounting to control valve pressure supply port protection class acc. DIN self-learning none with PC-Software not oiled, dry industrial air, content of solid < 30µ, pressure dew point 0 K under the lowest ambient temperature compressed air or non flammable gases (nitrogen, CO, ) standardized mounting kits (also with optical position indicator) G /8" IP 65 (additional over pressure in the body with scavenging air) По вопросам продаж и поддержки обращайтесь: Екатеринбург (343) , Казань (843) , Краснодар (86) , Москва (495) , Санкт-Петербург (8) Единый адрес: ssr@nt-rt.ru
2 Technical Information, ex-versions Version 8049-Ex 8049-Ex-0 nominal stroke 3-8 mm 3-8 mm voltage of the working resistance 4 V (700 Ohm@0mA) 4 V (700 Ohm@0mA) auxiliary energy, pneumatic 4,5-6 bar 4,5-6 bar adjustment of stroke and zero point internal air consumption configuration air quality mounting to control valve pressure supply port protection class acc. DIN general information concerning explosion-proofing self-learning with PC-Software product type test certificate BVS 08 ATEX E54 BVS 08 ATEX E54 ATEX specification II G Ex ia T3/T4 II G Ex ia T3/T4 none not oiled, dry industrial air, content of solid < 30 µ, pressure dew point 0 K under the lowest ambient temperature standardized mounting kits (also with optical position indicator) G /8" IP 65 (additional over pressure in the body with scavenging air) temperature ranges T4: Tamb = C T3: Tamb = C T4: Tamb = C T3: Tamb = C information concerning explosion-proofing max. input voltage Ui = DC 30V Ui = DC 30V max. input current Ii = 00mA Ii = 00mA max. input power Pi = 600mW Pi = 600mW max. interior capacity Ci = insignificant Ci = insignificant max. interior inductance Li = insignificant Li = insignificant Materials standard version version "ground plate in stainless steel" version "completely stainless steel" positioner housing Vestamid (electroconductive) Vestamid (electroconductive) stainless steel ground plate Aluminium, KTL-coated stainless steel stainless steel Combination possibilities (4-wire) version V (4-wire) version V (-wire) version V 8049-Ex (ex-version) version V standard body ground plate in stainless steel positioner completely in stainless steel positioner for part turn actuator single acting feed back module analog RM- feed back module RM- manometer block
3 Accessories Analogue feedback module RM- Linear feedback signal 4-0 ma Independent from positioner electronics Uses a separate potentiometer path Easy to retrofit wire design Not appropriate for 8049-Ex or 8049-Ex-0 Technical Information Supply voltage Output signal 4V DC 4-0 ma Temperature range 0-50 C * Temperature coefficient < 0,% / K * at temperatures outside this range, the feedback module must be readjusted at operating temperature. Feedback module RM- Feedback on current valve position Feedback signal does not require calibration Feedback by wire design electrically isolated limit signal transmitters Limit signal transmitters freely adustable (0-00%) Easy to retrofit Technical Information Supply voltage 4V DC (±0%) Output signal Max. adm. working resistance Temperature range Limit signal transmitters 4-0 ma < 700 Ohm C pieces Switching range adjustable 0-00% Switching capacity of the limit sign.trans. Switching hysteresis ca.,5% 4V AC/DC, 70mA Gauge block Gauge block between positioner and connection block Reading range of 0-6 bar Pressure reading in bar and PSI Easy to retrofit
4 Basic design dig. positioner dig. positioner dig. positioner 8049-Ex dig. positioner 8049-Ex-0 dig. positioner (version 5) quote only if required 8049/ S - 4P P EP 0P 4P5 For acutator single acting double acting Air delivery low standard high L S H Body aluminium / plastic 0 stainless steel ground plate body in stainless steel Electro-pneumatic connection cable bushing x M6x,5 0 NPT-thread /" plug connection Mx, 5-pin Pneum atic connection G /8" 0 NPT /8" Position measuring linear potentiometer w ithout sensing pin linear potentiometer w ith standard sensing pin (L=99,6mm) linear potentiometer w ith curtated sensing pin (L=94,4 mm) rotary potentiometer for semi-rotary drive EMV-galvanic separating module for exterior path sensor 0 G 3 Optical indicator w ithout indicator indicator disc for sensing pin in PA indicator disc for sensing pin in metal rotation angle indicator 0 3 Auxiliary module w ithout auxiliary module analog feedback modul RM intelligent feedback modul RM w ith tw o limiting value encoders IPC-process controller ASI 0 C A Accessories w ithout accessories 0 manometer bloc single acting, scaling in bar and PSI Further details special design (quote only if required) positioner montage (ony for the manufacturer) S M Settings standard - settings on customer request Special design w ithout separated version incl. xxterior path sensor for lift drive special design for ex zone (dust) -
5 Measurements M6x,5 5 8,5 4 A P G/8"
6 Configuration-Software - Setup-Parameters Adjustment of controlling parameters (input signal, stroke limitation, tight closing function, control hysteresis, valve function,...) Configuration-Software - Flow Characteristic Functions Adjustment of flow and display of various flow related functions.
7 Configuration-Software - Informations of the positoiner Information of valve stroke, running time, soft- and hardware-versionen, achieved temperature- and stroke levels, error messages Positioner 8049 top mounted on GS- Control Valve Type 80 Positioner 8049 top mounted on Aseptic Right Angle Control Valve Type 60 По вопросам продаж и поддержки обращайтесь: Екатеринбург (343) , Казань (843) , Краснодар (86) , Москва (495) , Санкт-Петербург (8) Единый адрес: ssr@nt-rt.ru
AS-I
Digital Positioner 8049 Compact digital positioner for pneumatic control valves. Positioner can be integrated into valve actuator (no external moving parts for stroke feedback) Wide range of strokes 3-8
More informationDigital Positioner 8049
Compact digital positioner for pneumatic control valves. Positioner can be integrated into valve actuator (no external moving parts for stroke feedback) Wide range of strokes 0. to. inches ( 8 mm) No steadystate
More informationDigital Positioner 8049
Compact digital positioner for pneumatic control valves. Positioner can be integrated into valve actuator (no external moving parts for stroke feedback) Wide range of strokes 0. to. inches ( 8 mm) No steadystate
More information3/2-Way Valve DN 15 up to DN 40. Technical Information. normal function, normally closed. distributing, mixing function and shut - off function
3/2-Way Valve 78 DN 1 up to DN 4 Pneumatically operated 3/2-way valve for the control of neutral and slightly aggressive media. (Stainless steel version, Data sheet Type 781) Compact design Unaffected
More informationMotor Valve GS 3 series DN 15 up to DN 200 with safety spring return
y% 100 75 50 25 0 Motor Valve GS 3 series Version NR2 8035 DN 15 up to DN 200 TÜV-approval according DIN 32730 for the pressure ratings PN40, ANSI150 and ANSI 300 Technical Information Design Flangeless
More informationFlanged Motor Valve compact DN 15 up to DN
Flanged Motor Valve compact DN 15 up to DN 50 7232 Motor valve for on/off and modulating operation for neutral and aggressive media. Compact design Self adaption Unaffected by lightly contaminated media
More informationControl Valve 8021 with integrated positioner
Control Valve 8021 GS 3 series DN 15 up to DN 200 Pneumatic control valve for the control of neutral and aggressive fluids Space saving wafer type construction Lowest possible weight Quiet operation Fast
More informationVersaFlow Mag 3000 Electromagnetic Flow Sensor Technical Datasheet. Specification
VersaFlow Mag 3000 Electromagnetic Flow Sensor Technical Datasheet Sanitary and hygienic solution The VersaFlow Mag 3000 is the electromagnetic flow sensor for the food and beverage industry. The 3000
More informationMT4-024/MT4-230 MT8-024/MT8-230
Smart-T MT4-024/MT4-230 MT8-024/MT8-230 SMLL LINER THERMOELECTRIC CTUTORS PRODUCT DT FETURES No mounting tools required (easily mounted using valve adapter) Water-protected housing design in all mounting
More informationDL1000 Electrode Mountings
DL1 Electrode Mountings (Durafet II ph Electrodes & Mountings for DL421 with and without Vario Pin Durafet Connectors) Pipeline Electrode Mounting (7758 Type) ph ORP Insertion Removal (7774 Type) Sanitary
More informationAP ATEX AIRPOWER POSITIONERS AP2000 FEATURES AP1000 & AP1200 FEATURES OPTIONS OPTIONS
AP1000-2000 Airpower positioners are a robust range of rotary or linear valve positioners in AP1000 electro-pneumatic (4-20mA), AP1200 pneumatic (3-15 psi) or AP2000 programmable smart type. Designed to
More informationSeries 60. New Smart Positioner. Compact design Convenient & powerful function Enhanced reliability
Series 60 New Smart Positioner Compact design Convenient & powerful function Enhanced reliability J Flow Controls, LLC 14 De Camp Cincinnati, OH 45216 Phone: 513-731-2900 Fax 513-731-6939 www.jflowcontrols.com
More informationFasTrak High Capacity Smart Positioner
FasTrak High Capacity Smart Positioner 2 CCI provides the next level of control valve performance CCI provides the next level of control valve performance with FasTrak, a high capacity digital positioner
More informationPositioners Converters Limit Switches Position Transmitters Solenoid Valves Accessories. Selection and Application
Positioners Converters Limit Switches Position Transmitters Solenoid Valves Accessories Selection and Application Associated s T 8355 EN ff. Edition January 2010 Information Sheet T 8350 EN Positioners,
More informationOperating Instructions. Pneumatic Control Valve Low Temperature. Type Series GS3
Operating Instructions Pneumatic Control Valve Low Temperature Type 8026 Series GS3 With: Digital Positioner Type 8048 Electro-pneumatic Positioner Type 8047 Pneumatic Positioner Type 8047 Version: 03/2006
More informationAngle Seat Control Valve 7020
Angle Seat Control Valve 72 DN 8 up to DN 8 PN 4 Pneumatically operated control valves for neutral through to highly aggressive media. Integrated positioner Compact design All parts contacting the fluid
More informationOperating Instructions. Angle Seat Control Valve. Type 7020
Operating Instructions Angle Seat Control Valve Type 7020 With: Digital Positioner Type 8048 Electro-pneumatic Positioner Type 8047 Pneumatic Positioner Type 8047 Version: 02/2006 Manual-7020e.doc Art.-No:
More informationType Installation, Operation and Maintenance Instructions. Ordering Information. Contents CA20 -
Type 2000 Pneumatic and Electropneumatic Valve Positioner Installation, Operation and Maintenance Instructions Ordering Information Use this coding system to order Model CA20 - Type of Positioner 00 P/P
More information4.3 MSK SWITCH BOX MSK (SIZE I) FEATURES ADVANTAGES
SWITCH BOX MSK (SIZE I) FEATURES - A compact, robust switch box to be mounted on pneumatic actuators - Position response via integrated micro limit switches - Integrated terminal Strip - The micro limit
More informationIntelligent Positioner
Intelligent Positioner Construction The digital electro-pneumatic positioner detects the valve position with an external long life travel sensor. It possesses a solid housing with protected operating keys.
More informationV200 Series Positioners
V200 Series Positioners In a single compact and rugged housing The V200 positioner incorporates the flexibility of converting from a pneumatic unit to several versions of an electropneumatic unit, and
More informationJUMO dtrans p20. Process pressure transmitter. Type Brief description. Key features. Block diagram
Data Sheet 403025 Page 1/10 JUMO dtrans p20 Process pressure transmitter Brief description The JUMO dtrans p20 pressure transmitter with HART interface combines maximum precision with easy operation. It
More informationElectronic Limit Switch Type
Electronic Limit Switch Type 3738-20 with optional solenoid valve for on/off rotary actuators Application Electronic limit switch for on/off applications to indicate the end position of rotary actuators.
More informationFisher i2p 100 Electro Pneumatic Transducer
Product Bulletin D103197X012 i2p 100 Transducer Fisher i2p 100 Electro Pneumatic Transducer The Fisher i2p 100 electro pneumatic transducer, shown in figure 1, uses a converter module that converts a milliampere
More informationCombics Weighing Platforms CAAPP...
Combics Weighing Platforms CAAPP... Weighing platforms Large selection of combination options for standard components High weight bearing construction with simultaneous display accuracy High IP protection
More informationSeries 3730 Electropneumatic Positioner Type
Series 3730 Electropneumatic Positioner Type 3730-1 Application Single-acting or double-acting positioner for attachment to pneumatic control valves. Self-calibrating, automatic adaptation to valve and
More informationRelative pressure transmitter type 522 for shipbuilding
Relative pressure transmitter type 522 for shipbuilding Pressure range 0... 2.5 600 bar The compact type 522 pressure transmitter for shipbuilding is based upon the Huba Control developed thick film technology
More informationRelative and absolute pressure transmitter type 528
Relative and absolute pressure transmitter type 528 Pressure range -1... 0 60 bar The compact type 528 pressure transmitter is based upon the well proven ceramic technology developed by Huba Control over
More informationVALVE CONTROLLERS Controllers for Dust Extr 2010 / 2011 action Technology
VALVE CONTROLLERS Controllers for Dust Extraction 2010 Technology / 2011 Valve controllers for all cases HESCH has the skills and technology to tackle any control task for dedusting of filter and dust
More informationSMART VALVE POSITIONER 4 to 20 ma + HART Digital Communication. smar B87
SMART VALVE POSITIONER to ma + HART Digital Communication B87 DESCRIPTION The FY microprocessor based positioner provides fast and accurate positioning of diaphragm or cylinder actuators. The FY produces
More informationType Type 1001 Transducers. I/P & E/P Transducers
Type 1001 I/P & E/P Description The Type 1001 is a patented family of electropneumatic instruments that is used to reduce a supply pressure to a regulated output pressure which is directly proportional
More informationДвойной электромагнитный клапан DMV/12, DMV-D/12, DMV-DLE/12 DUNGS
По вопросам продаж и поддержки обращайтесь: Архангельск (8182)63 90 72 Астана (7172)727 132 Белгород (4722)40 23 64 Брянск (4832)59 03 52 Владивосток (423)249 28 31 Волгоград (844)278 03 48 Вологда (8172)26
More informationField instrumentation. Electropneumatic units. as I/P converters and positioners
Electropneumatic units as I/P converters and positioners I/P converter TEIP 11, millionfold approved Analogue positioner TZIM, robust and low-cost concept Intelligent positioner - TZID for top level demands
More informationSS3 Linear / Rotary. Smart Valve Positioner. Smart performance with innovative and ever-strong coil drive even under harsh working environments
Smart Valve Positioner SS3 Linear / Rotary Smart performance with innovative and ever-strong coil drive even under harsh working environments Easy and quick auto-calibration Detecting RA (reverse acting)
More informationElectropneumatic positioner APIS
Electropneumatic positioner APIS HART protocol ATEX certificate II 2G Exia IIC T6/T5 Gb II 2G Exia IIC T6/T5/T4 Gb version with Hart Simple in installation and programming Possibility of remote assembling
More informationIntelligent Positioner
Intelligent Positioner Construction The GEMÜ 1 µpos is a digital electro-pneumatic positioner for process valve control. Designed for simple, safe and quick use with valves with strokes < mm. The positioner,
More informationPOSITIONERS and Controls for Complete Valve Automation
CONTROLS A Division of AT Controls Pneumatic & Electro-Pneumatic POSITIONERS and Controls for Complete Valve Automation 1 SS SERIES SS Features Easy and quick auto-calibration Detecting RA (reverse acting)
More informationActuators & Positioners Electro-Pneumatic Converters I/P Signal Converters - TEIP 11 Model without Booster Stage
Data Sheet Actuators & Positioners Electro-Pneumatic Converters I/P Signal Converters - TEIP 11 Model without Booster Stage Reliable through well-proven concept - More than 1,000,000 units in use Compact
More informationTECHNICAL BULLETIN. Logix 510si Series Digital Positioner. Experience In Motion FCD LGENTB /09
Logix 510si Series Digital Positioner TECHNICAL BULLETIN FCD LGENTB0510-01 09/09 Experience In Motion Introduction The Logix 510si series are single acting, user-friendly digital positioners. As all positioners
More informationV200 Series Positioners
V200 Series Positioners In a single compact and rugged housing The V200 positioner incorporates the flexibility of converting from a pneumatic unit to several versions of an electropneumatic unit, and
More informationType Type I/P & E/P Transducers
Type 1500 I/P & E/P Type 1500 Description Principle of Operation (ee Fig. 2 and 6) The T-1500 Transducer is a force balance device in which a coil is suspended in the field of a magnet by a flexure. Current
More informationTZIM. Electropneumatic Analog Positioner 10/ EN
TZIM Electropneumatic Analog Positioner EP001XA.tif Q Convenient, simple design Q Easy to handle Q User-friendly operation, easy to understand Q Reliable concept, I/P conversion through the 500,000 times
More informationAngle Seat Valves by Schubert & Salzer
Angle Seat Valves by Schubert & Salzer Angle seat valves contact factory Angle seat valves Angle Seat Valve 7010, reinforced design stainless steel 2" up to 3" 580 psi diaphragm actuator, stainless steel
More informationSentronic PLUS 614 Series
Sentronic PLUS 64 Series Proportional Technology www.asco.com PRESSURE CONTROL: 64 SERIES SENTRONIC PLUS Sentronic PLUS Sentronic PLUS is a digitally operated pressure regulator valve. This valve accurately
More informationSartolab P The new way for reliable sterile filtration of cell culture media
Sartolab P The new way for reliable sterile filtration of cell culture media По вопросам продаж и поддержки обращайтесь: Астана+7(7172)727-132, Волгоград(844)278-03-48, Воронеж(473)204-51-73, Екатеринбург(343)384-55-89,
More informationIntelligent Positioner
Intelligent Positioner Construction The GEMÜ epos digital electro-pneumatic positioner detects the valve position via its external LongLife travel sensor. It has a solid housing with protected operating
More information3/2-way Rocker Solenoid Valve for pneumatic systems
3/-way Rocker Solenoid Valve for pneumatic systems EEx ia versions Direct-acting High cycling rate Reduced power consumption Type 6104 can be combined with... Sub-base connection Approvals: Type 654 Servo-assisted
More informationSATRON VT Pressure Transmitter
SATRON VT pressure transmitter belongs to the series V-transmitters. SATRON VT is used for 0-1.4 kpa...0-100 MPa ranges. It is a 2-wire transmitter with HART standard communication. In pressure measuring
More informationVersions. Version with K VS Version with K VS 2.0. Fig. 1: Type 3967 Solenoid Valve
Type 367 Solenoid Valve Application Solenoid valve for controlling pneumatic linear actuators with NAMUR rib according to IEC 60534 or pneumatic rotary actuators with NAMUR interface according to VDI/VDE
More informationV200 Positioner. V200 P Pneumatic Positioner. V200 E Electropneumatic Positioner. Housing Material: Cast aluminium with polyester coating
V200 Positioner Housing Material: Cast aluminium with polyester coating Indicator Options: Flat pointed indicator or raised indicator (red/green or yellow/black) One housing for pneumatic or electropneumatic
More informationARCAPRO positioner. Positioner customized for specific tasks
ARCAPRO ARCAPRO Positioner customized for specific tasks 2 3 1 A linear function between the input signal and stroke is the best way to ensure maximum control precision. Control valves with pneumatic actuators,
More informationInline Flow meter for compressed air and gases DN15 (1/2 ) - DN80 (3 )
EE771/EE772 Inline Flow meter for compressed air and gases DN15 (1/2 ) - DN80 (3 ) The inline flow meter EE771/EE772, based on the measurement principle of thermal mass flow, is ideally suited for the
More informationTECHNICAL BULLETIN. Logix 520MD Series Digital Positioner. Experience In Motion FCD LGENTB /09
Logix 520MD Series Digital Positioner TECHNICAL BULLETIN FCD LGENTB0520-01 11/09 Experience In Motion Introduction The Logix 520MD Series combines superior positioning and tuning functions with convenient
More informationЭлектромагнитные клапаны для пара Burkert
По вопросам продаж и поддержки обращайтесь: Архангельск (8182)63 90 72 Астана (7172)727 132 Белгород (4722)40 23 64 Брянск (4832)59 03 52 Владивосток (423)249 28 31 Волгоград (844)278 03 48 Вологда (8172)26
More informationAPS & APIS ATEX AIRPOWER SWITCH BOXES FEATURES DESCRIPTION
page 1 DESCRIPTION The switch boxes are suitable for rotary actuators and are the industry leader in versatility, quality and approvals gained. Models include APS standard range with a variety of outputs
More informationCorrosion Resistant Pneumatic Positioners Model 4700P and 4700E
Corrosion Resistant Pneumatic Positioners Specification Data CS2007 4/98 Table of Contents Foreword............................................................. 2 Numbering System.....................................................
More informationTopControl Continuous
860 Electropneumatic positioner for pneumatically actuated control valves Type 860 can be combined with... Type 7 Type 70 Types 70/7/7K Type 800 Piston-controlled globe valve Piston-controlled angle seat
More informationFlap-Type Flow Meter Prall
Suitable for H 2 O, acids, alkaline solutions and gases Spring-loaded flap Horizontal or vertical direction of flow Largely independent of viscosity Limit contacts, optional Analog output 4 20 ma, optional
More informationControl Valve with integrated positioner
Control Valve 8021 with integrated positioner GS 1 series DN 15 up to DN 150 Pneumatic control valve for the control of neutral through to highly aggressive media in process engineering, chemical industries
More informationField IT Actuators & Positioners Electro-Pneumatic Converters I/P Signal Converters Standard Model with Booster Stage
Data Sheet Field IT Actuators & Positioners Electro-Pneumatic Converters I/P Signal Converters Standard Model with Booster Stage Reliable through well-proven concept - More than 1,000,000 units in use
More informationHLX771/772. Inline Flowmeter for compressed air and gases DN15 (1/2 ) - DN80 (3 ) Typical Applications
The inline flow meter, based on the measurement principle of thermal mass flow, is ideally suited for the measurement of flow in pipelines DN15 (1/2 ) up to DN80 (3 ). Measurement of for instance the usage
More informationTECHNICAL BULLETIN. Logix 505si Series Digital Positioner. Experience In Motion FCD LGENTB /13
Logix 505si Series Digital Positioner TECHNICAL BULLETIN FCD LGENTB0505-03 09/13 Experience In Motion Introduction The Logix 505si is a basic positioner for most simple control loops. It is microprocessor
More informationIntrinsically safe presure transmitters for hazardous environments Type MBS 4201, MBS 4251, MBS 4701 and MBS Technical brochure
Intrinsically safe presure transmitters for hazardous environments Type MBS 4201, MBS 4251, MBS 4701 and MBS 4751 Technical brochure Features Ex ll 1G EEx ia llc T4 - T6 in compliance with ATEX 100a Applicable
More informationLinear actuators DFPI
Linear actuators DFPI Linear actuators DFPI Key features General information Linear actuator for actuating process valves such as gate valves and shut-off valves in process automation systems Linear actuator
More informationJUMO dtrans p20 DELTA
Data Sheet 403022 Page 1/9 JUMO dtrans p20 DELTA Differential pressure transmitter Brief description The JUMO dtrans p20 DELTA differential pressure transmitter with HART interface combines maximum precision
More informationSystem 6000 Electropneumatic Converter for Direct Current Signals Type 6116 i/p Converter
System 6000 Electropneumatic Converter for Direct Current Signals Type 6116 i/p Converter Application Used to convert a direct-current input signal into a pneumatic output signal for measuring and control
More informationПневмоострова Burkert
По вопросам продаж и поддержки обращайтесь: Архангельск (8182)63 90 72 Астана (7172)727 132 Белгород (4722)40 23 64 Брянск (4832)59 03 52 Владивосток (423)249 28 31 Волгоград (844)278 03 48 Вологда (8172)26
More informationFeatures. Flexibility
The V100 positioner can be ordered as a base model pneumatic positioner, converted to standard NEMA 4X electropneumatic, EX model, or FF (fail freeze) model in a matter of minutes, without removing the
More informationRVP-R- VAV controller. In explosion-proof version
VAV controller In explosion-proof version RVP-R- SMAY LLC / 29 Ciep³ownicza St. / 31-587 Cracow / Poland tel. +48 12 378 18 00 / fax. +48 12 378 18 88 / e-mail: info@smay.eu Intended use VAV control units
More informationPneumatic Positioner Type 3766 Electropneumatic Positioner Type 3767
Pneumatic Positioner Type 3766 Electropneumatic Positioner Type 3767 Application Single-acting or double-acting positioners for attachment to pneumatic control valves. Supplied with a pneumatic input signal
More informationInstallation and Operating Instructions Electro-Pneumatic Rotary Positioner SP-21. Description of Device. Part Number System
Description of Device VALMAC Posi-Zest SP-2100 Series is the advanced control device for a rotary control valve that provides unparalleled stability in difficult environments. Easy Maintenance Precise
More informationVALVE ACCESSORIES & CONTROLS V200 POSITIONER A POSITIONER THAT OFFERS IT ALL IN ONE COMPACT, SIMPLE, HOUSING
VALVE ACCESSORIES & CONTROLS V200 POSITIONER A POSITIONER THAT OFFERS IT ALL IN ONE COMPACT, SIMPLE, HOUSING WWW.VACACCESSORIES.COM 205-678-0507 The V200 Positioner Internal I/p with simple loop test points.
More informationSP-20 Input. Installation and Operating Instructions Electro-Pneumatic Linear Positioner. Description of Device. Part Number System
Description of Device VALMAC Posi-Zest SP-2000 Series is the advanced control device for a linear control valve that provides unparalleled stability in difficult environments. Easy maintenance Precise
More informationSPT- I / U PRESSURE TRANSMITTER for general applications
Fields of application Design Examples Hydraulics Air conditioning and heating Testing technology Industrial robots Process controlling Water technology Pneumatics Description The pressure transmitters
More informationType I/P & E/P Transducers
Type 1500 I/P & E/P Transducers Type 1500 Description The T-1500 is a new series of electro-pneumatic transducers that convert an electrical signal to a proportional pressure output. It provides precision
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/-, 5/- 5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
More informationT-1001 TYPE 1001 I/P & E/P TRANSDUCERS
TYPE 1001 I/P & E/P TRANSDUCERS T-1001 The Type 1001 is a patented family of electro-pneumatic instruments that is used to reduce a supply pressure to a regulated output pressure which is directly proportional
More informationControl Valve fluids with integrated positioner. GS 3 series - DN 15 up to DN 250. material
Control Valve 8021 with integrated positioner GS 3 series - DN 15 up to DN 250 Pneumatic control valve for the control of neutral and aggressive fluids with integrated positioner Space saving wafer type
More information2/2-way Diaphragm Valve with stainless steel design, weld end or clamp connection, DN 8-25
2/2-way Diaphragm Valve with stainless steel design, weld end or clamp connection, DN 8-25 Type 2103 can be combined with Hermetical separation of fl uids from the operating mechanism by diaphragm Zero
More informationFor single and double operated actuators. Exhaust air recirculation (3/2 way function)
For single and double operated actuators /-, 5/- and 5/ Directional Control Valves Actuation: Electromagnetic Indirectly controlled soft seal spool valves Connection G /4 or /4 NPT NAMUR interface Exhaust
More informationSMART POSITIONER YT-2300 SERIES USER'S MANUAL
SMART POSITIONER YT-2300 SERIES USER'S MANUAL Table of Contents Contents Page No. Introduction 4 Manufacturer Warranty 4 Product Description 5 Main Features and Functions 5 Label Description 6 Suffix Symbols
More informationVarioDrive C, technical information. VarioDrive C, size 084. VarioDrive C, size 112. VarioDrive C, size 150
Antriebstechnik_211_5_27_Finale_EN_:Vorlage 27.5.211 1:12 Seite 55 VarioDrive C 56 58 VarioDrive C, size 112 62 VarioDrive C, size 15 67 VarioDrive C VarioDrive C, technical information По вопросам продаж
More informationThe T5220 Series Electro-Pneumatic Transducer converts a DC current or voltage input signal to a directly proportional pneumatic output.
GENERAL INFORMATION T5220 SERIES TRANSDUCER Electro-Pneumatic (I/P, E/P) APPLICATIONS The T5220 Series Electro-Pneumatic Transducer converts a DC current or voltage input signal to a directly proportional
More informationV200 Series Positioners
V200 Series Positioners In a single compact and rugged housing The V200 incorporates the flexibility of converting from a pneumatic unit to several versions of an electropneumatic unit, and the ability
More informationSS2 Linear / Rotary Smart Valve Positioner
COTROLS A Division of AT Controls Smart performance with innovative and ever-strong coil drive even under harsh working environments Also available in REMOTE TYPE 316 STAILESS STEEL BODY Smart performance
More informationSMART VALVE POSITIONER 4 to 20 ma + HART Digital Communication. smar
SMART VALVE POSITIONER to ma + HART Digital Communication smar DESCRIPTION The FY microprocessor based positioner provides fast and accurate positioning of diaphragm or cylinder actuators. The FY produces
More informationSystem Electropneumatic Converters (Proportional Valves) Electronic Process Controllers Signal Converters
System 6000 Electropneumatic Converters (Proportional Valves) Electronic Process Controllers Signal Converters Edition April 2018 Information Sheet T 6000 EN Electropneumatic Converters i/p converters
More informationType Electronic Limit Switch
Type 3738-20 Electronic Limit Switch With optional solenoid valve Application Electronic limit switch for on/off applications to indicate the end position. Optionally with integrated solenoid valve. Special
More informationSINGLE-ACTING ACTUATORS FOR DOUBLE-ACTING & SERIES 65 POSITIONERS PNEUMATIC & ELECTRO-PNEUMATIC. The High Performance Company
POSITIONERS PNEUMATIC & SERIES 65 FOR DOUBLE-ACTING & SINGLE-ACTING ACTUATORS The High Performance Company SERIES 65 FEATURES The Brayline Series 65Pneumatic and Electro-Pneumatic Positioner feature modular
More informationType 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics Type 658 standard standard High flow-rate capacity Reduced power consumption Single or manifold mounting Standard-, EEx m and EEx i versions
More informationElectro-Pneumatic Positioner Series 830/831-WP/EX. Operation & Maintenance Manual
Electro-Pneumatic Positioner Series 830/831-WP/EX Operation & Maintenance Manual Electro-Pneumatic Positioner Model 830/831- WP/EXP This operation & maintenance manual corresponds to Forbes Marshall Arca
More informationElectro-Pneumatic Linear Positioner Installation and Operation Instructions B GB
Installation and Operation Instructions 99.66.02-B GB Description of Device (4-~20mA) is the advanced control device for a linear control valve that provides unparalleled stability in difficult environments
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/2-, 5/2-5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
More informationМодульные клапаны Burkert
По вопросам продаж и поддержки обращайтесь: Архангельск (818)63 90 7 Астана (717)77 13 Белгород (47)40 3 64 Брянск (483)59 03 5 Владивосток (43)49 8 31 Волгоград (844)78 03 48 Вологда (817)6 41 59 Воронеж
More informationModular electrical and pneumatic automation system
Modular electrical and pneumatic automation system Type 8650 can be combined with... For use in hazardous areas (zone 1/1) Developed in cooperation with Siemens Automation and Drives Electrical connection
More informationResistance Thermometers Model TR217, with Spring-Loaded Probe Tip
Electrical Temperature Measurement Resistance Thermometers Model TR217, with Spring-Loaded Probe Tip WIKA Data Sheet TE 60.22 Applications Temperature measurement at bearings of: T Pumps T Gears T Motors
More informationEE300Ex-HT. Humidity/Temperature Transmitter for Intrinsically Safe Applications. Typical Applications. Features. Display
EE300ExHT Humidity/Temperature Transmitter for Intrinsically Safe Applications The EE300Ex humidity / temperature transmitter has been designed specifically for measurement in explosion hazard areas. It
More informationJUMO dtrans p20. Process pressure transmitter. Brief description. Special features. Block diagram. Approvals/approval marks (see "Technical data")
Page 1/15 JUMO dtrans p20 Process pressure transmitter Brief description The device with the HART interface combines maximum precision with simple operation. It is used to measure the system pressure of
More informationPRODUCTS CATALOG (2018) TISSIN CO.,LTD. Smart Valve Positioner. Electro-Pneumatic Positioner. Volume Booster. Lock Up Valve. Air Filter Regulator
PRODUCTS CATAOG (08) TISSIN CO.,TD. Smart Valve Positioner Electro-Pneumatic Positioner Volume Booster ock Up Valve Air Filter Regulator Solutions for control valve system About Tissin Solutions for control
More informationFor double-acting actuators. Crossover-free switching. Safety function in the event of power failure provided by mechanical return spring
For double-acting actuators 5/ Directional Control Valves Actuation: Electromagnetic Indirect solenoid operation soft seal spool valve Connections G 1/, 1/ NPT, G 1/, NAMUR Interface Crossover-free switching
More information