Pressure Regulator compact 8011

Transcription

1 Pressure Regulator compact 8011 GS 3 series 1/2 up to 6 Self operated regulation of inlet and outlet pressures of neutral through to highly aggressive media in process engineering, chemical industries and for plant equipment. Space saving wafer type design Lowest possible weight High Kvs (Cv)-values Technical Information Body design ANSI flange wafer (self-aligning) Nominal sizes 1/2" - 6" Nominal pressure acc. DIN psi (fits also to 1/2" - 6" for flanges with facing type B psi) Nominal pressure acc. ANSI ANSI 150 1/2" - 6" for flanges acc. ASME B16.5 RF ANSI 300 1/2" - 6" Nominal pressure acc. JIS 10K 1/2" - 2" for "raiced face" flanges 20K 1/2" - 1 1/2" Pressure range 4,4 up to 145 psi (see table) Media temperature -75 F up to +445 F at special versions up to 572 F Max. ambient temperature +176 F Max. temperature for the Diaphragm material actuator CR: -4 F up to +176 F EPDM: -22 F up to +266 F Viton: -5 F up to +302 F Leakage Disc pair Disc pair Disc pair Carbon-stainless steel SFC STN 2 % of Kvs < 0,0001 < 0,0005 < 0,001 IEC IV-S1 IV-S1 IV EN D E E Cvs-values see data sheet Fixed disc Sliding disc Flangeless body design Coupling ring for sliding disc PTFE Packing, self-adjusting Diaphragm-housing Diaphragm Bleeder valve Sensing port Set point spring Set point screw leak detection port (optional) Schubert & Salzer Inc., 4601 Corporate Drive N.W., Suite 100 Concord, NC 28027, Ph.: (704) , Fax: (704) info@schubertsalzerinc.com,

2 Admissible Pressure (For temperatures of up to 250 F) Carbon-stainless steel coated SFC-stainless steel coated Maximum pressures for pressure reducing valve (downstream pressure control) output presssure P /2" /4" " /4" /2" " /2" " " " " For temperatures exeeding 250 F: consider operation limits STN 2 Maximum pressures for pressure reducing valve (downstream pressure control) output presssure P /2" /4" " /4" /2" " /2" " " " " back pressure (upstream pressure control) inlet presssure P /2" /4" " /4" /2" " /2" " " " " Pressure limits DIN and ANSI PN16 PN40 PN100 ANSI 150 ANSI 300 ANSI 600 P max Materials Body Stainless steel 316 Ti Head section Stainless steel 316 Ti Diaphragm housing Stainless steel 316 Ti Diaphragm CR, EPDM, FKM, PTFE-fo Spring Stainless steel 301 Stem Stainless steel 316 Ti, roller burnished Fixed disc Stainless steel 316 Ti, coated STN2-disc Sliding disc Special carbon material SFC-disc STN2-disc Guide ring for sliding disc Stainless steel 318 back pressure (upstream pressure control) inlet presssure P /2" /4" " /4" /2" " /2" " " " " For best regulation, the lowest spring range that contains the pressure setpoint should be selected.

3 Pressure - Temperature ratings for GS3 Valves ANSI #150 Sliding unit: carbon/sfc - stainless steel, coated Sliding unit: STN2 DN 210 F 300 F 400 F 445 F 210 F 300 F 400 F 445 F 1/2" - 5" " ANSI #300 Sliding unit: carbon/sfc - stainless steel, coated Sliding unit: STN2 DN 210 F 300 F 400 F 445 F 210 F 300 F 400 F 445 F 1/2" - 2 1/2" " " " " Ordering Number System / V D K M S 1-5 : Please quote all 5 sections. 6-12: Quote only if required. Symbol: "V": Valve Type Size "R": Repair kit (sealings) 1. Function 2. Design 3. Body design 4. Version 5. Function 6. Pressure range D Pressure K Compact design E GS3 - flangeless design 2 Completely 0 Overflow psi regulator acc. ANSI 150 stainless steel valve psi compact F GS3 - flangeless design 5 Completely stainless 1 Pressure psi (Type 8011) acc. ANSI 300 steel with controlling regulator psi G GS3 - flangeless design connection G 1/4" acc. DIN, 145psi - 580psi 7. Special version 8. Diaphragm material 9. Sliding disc 10. Fixed disc 11. Kvs-values 12. Special versions M To state, if - CR (Standard) - Carbon - Stainless steel/stellite % (Stand.) S Quote for further 1 EPDM 9 STN2/STN3 1 STN 2 - plate (only in A red. to 63 % further special sections are 2 FKM S SFC combination with 1 red. to 40 % versions quoted 3 CR + PTFE-foil the position "9") B red. to 25 % 4 EPDM + PTFE-foil 3 STN 3 - plate (only in 2 red. to 16 % 5 FKM + PTFE-foil combination C red. to 10 % with the position "9") 3 red. to 6,3 % 4 red. to 2,5 % 5 red. to 1 % 7 red. to 12 % 8 red. to 2 % Ordering example: 8011/080VDKG210M1- -1 GS3-pressure regulator, 3", compact design, 145psi-580psi, completely stainless steel, spring cap closed, pressure regulator, pressure range psi bar, diaphragm material EPDM, sliding disc carbon material,fixed disc, stainless steel , reduced Cv-value (40%)

4 Dimensions and Weights L P M R A D C NPT 1/4" Size Weight in lb for pressure range (psi) /2" /4" " /4" /2" " /2" " " " " Ø C PN40 ANSI150 ANSI300 Size A D max. Stroke P M Anzahl "R" P M Number "R" P M Number "R" R L 1/2" /4" " /4" /2" " /2" " " " " Dimensions in inch

5 Ordering code - A 1 B C Size Charact. 100 % 63 % 40 % 25 % 20% 16 % 12 % 10 % 6,3 % 2,5 % 2 % 1 % 0,4% 1/2" (mod.) linear eq. perc /4" (mod.) lin eq. perc " (mod.) linear eq. perc /4" (mod.) linear eq. perc /2" (mod.) lin eq. perc " (mod.) linear eq. perc /2" (mod.) linear eq. perc " (mod.) linear eq.perc " (mod.) linear eq.perc " (mod.) linear eq.perc " (mod.) linear eq.perc " (mod.) linear eq.perc " (mod.) linear 1056 eq.perc. - Text and pictures are not binding. We reserve the right, to alter the equipment. Data sheet 8011-GS3usa/Version: