885 HELMETS & ARC (MMA) & TIG WELDERS GAS WELDING & CUTTING WELDERS ACCESSORIES. Page TIG TUNGSTEN ELECTRODES ARC WELDING ELECTRODES

Transcription

1 880 ARC (MMA) & TIG WELDERS 880 MIG/MAG WELDERS 885 GAS WELDING & CUTTING 885 WELDING ACCESSORIES Page Page Page Page PROTECTIVE 885 HELMETS & CLOTHING 887 MIG WIRE 889 TIG TUNGSTEN ELECTRODES 891 ARC WELDING ELECTRODES Page Page Page Page

2 Contents Description Group Page Arc (MMA) & TIG Welders Arc Welding Electrodes Clothing Curtains Fluids Gas Welding & Cutting Gloves Helmets MIG Welder Accessories & Spares MIG Wire MIG/MAG Welders TIG Welder Accessories & Spares TIG Tungsten Electrodes WELDING Groups Grading ion High performance industrial tooling designed for continuous use applications on machine tools where repeatability and long tool life are of critical importance. Professional Industrial tooling that has enhanced features and benefits demanded by craftsmen and professional users. Industrial Designed for regular use in industrial applications. Manufactured to stringent quality levels and international standards. Workshop Standard quality tooling for use by tradesmen and generally industrial use. Maintenance s designed for general maintenance of machines, workshops, garages and some household applications. Home Improver DIY quality tooling. Designed for home use and light industrial applications. Page 701

3 880 ARC (MMA) & TIG WELDERS Lynx TM EAW-140 AC MMA Welder A portable 230V single phase arc welder suitable for use with rutile electrodes of mm diameter. LYNX Capable of welding mild steel up to 6mm. Featuring a stepless regulator for infinite variable control of the welding current with low current facility for effective welding of thinner materials. Highly efficient transformer maximises potential. Safety features include thermal overload protection and turbo fan cooling - enables the ability to weld at greater power for longer periods. Provides full portability, ease of use and convenience and superb value. Operates from a 230V 13 amp standard domestic socket. Heavy duty casing. Two year warranty. Supplied complete with accessories, integrated carrying handle and 2m mains cable. Conforms to TUV-GS, GOST, EMC, LVD and all relevant CE requirements. Insulation class H. Protection degree IP21. WELDING TURBO F A N COOLED 2WARRANTY YEAR LOW CURRENT READY TO W ELD Contents: Lynx TM AC power supply. 1.8m primary cable, 10mm m earth cable and 150A clamp. Hand held face shield with 51 x 107mm glass. Scratch brush and slag remover. Instruction manual. Input voltage: 230V, 50/60Hz. Fuse rating: 13A. Phase: 1. Power consumption: 2.5kW. Output current range: 40A - 140A. Open circuit voltage: 50V. Dimensions (L x W x H): 270 x 250 x 310mm. Cheetah TM EAW-160 AC MMA Welder A portable 230V single phase arc welder suitable for use with rutile electrodes of 2-4mm diameter. Capable of welding mild steel up to 8mm. featuring a stepless regulator for infinite variable control of the welding current. Highly efficient transformer maximises potential. Safety features include thermal overload protection and turbo fan cooling - enables the ability to weld at greater power for longer periods. Provides full portability, ease of use and convenience and superb value. Operates from a 230V 13 amp standard domestic socket. Heavy duty casing, two large diameter solid wheels. 2 year warranty. Supplied complete with accessories, two large diameter solid wheels, integrated carrying handle and 2m mains cable. Conforms to TUV-GS, GOST, EMC, LVD and all relevant CE requirements. Insulation class H. Protection degree IP21. Contents: Cheetah TM AC power supply. 1.8m primary cable, 16mm m earth cable and 250A clamp. Hand held face shield with 51 x 107mm glass. Scratch brush and slag remover. Instruction manual. Input voltage: 230V, 50/60Hz. Fuse rating: 16A. Phase: 1. READY TO Power consumption: 2.5kW. W Output current range: 55A - 160A. ELD Open circuit voltage: 50V. Dimensions (L x W x H): 585 x 325 x 425mm. Inverter Welder TURBO F A N COOLED 2WARRANTY YEAR Current Range KEN-880 Lynx TM EAW140 40A - 140A 14.8kg -2020K CHEETAH Current Range KEN-880 Cheetah TM EAW160 55A - 160A 17.4kg -2040K MMA Mini Max Weighing in at less than 5kg, this has to be one of the lightest welders on the market. Its light weight does not mean it is less capable, it is in fact extremely portable and more versatile. It can be used with all types of electrodes, rutile, basic, stainless etc. The machine also benefits from the following technical features: hot start, arc force, anti-sticking, thermal cut-out. Duty 100%: 50A. Duty 60%: 65A. Duty 40%: 70A. Voltage: open circuit (no welding being carried out) 70V. Voltage supply: 230V. Dimensions (W x D x H): 100 x 215 x 150mm. BEST SELLER FOR DIY USE Not warranted for Industrial Use Description OSA-279 Mini Max 1.8kg -2000K Page 702 WEIGHS LESS THAN 5kg

4 Electrodes for Mild Steels 6013 Arc welding rods for mild steel and medium tensile steels. Medium rutile coated, all positional rods. Applications: for steel plate and strip including structural steels and pipe work, especially under site conditions. Superb finish with self-releasing slag.n.b. Suitable for AC (50V minimum open circuit) and DC +/-. FOR MILD STEEL & C-Mn STEEL No. of Rods (per pack) (per pack) KEN x kg -3010K 3.25 x kg -3020K 4.00 x kg -3030K Recommended Amperages Min. 70A 95A 130A Max. 100A 125A 170A Electrodes for Mild Steels E7018 ( Low Hydrogen ) Basic coated, all positional rods. Applications: for steel plate structural steels, pipe work and forgings. Ideal for repairs of casting and machinery, compensate for dilution effect of poor steels. Often used where rutile deposits may be at risk from cracking. N.B. Suitable for AC (70V minimum open circuit)and DC+. Optimum rooting operability is obtained using DC-.Conforms with AWS and BS EN standards.. Type of Rods (Per Pk) (per Pk) KEN x kg -1100K 2.0 x kg -1110K 316L 2.6 x kg -1120K 3.2 x kg -1130K 4.0 x kg -1140K 891 ARC WELDING ELECTRODES Electrodes for Stainless Steels 316L A Lime-Titania electrode giving excellent use ability and weldability, it deposits 19.5%Cr %Ni - 2.5%Mo weld metal. The Austenite structure gives good crack resisting properties. For welding of extra-low carbon 18%Cr-12Ni-Mo stainless steel. FOR STAINLESS Recommended Amperages Min. 20A 25A 50A 80A 120A Max. 40A 55A 90A 125A 180A S312 Stainless/Dissimilar Electrodes A Lime-Titania electrode giving excellent use ability and weldability, it deposits 29%Cr + 9%Ni weld metal. The Austenite nature resists cracking and provides a superb buffer effect against outer stress. For bond welding of dissimilar metals such as stainless steel, carbon steel, low alloy steel and welding of stainless clad steel. FOR STAINLESS WELDING FOR MILD STEEL & C-Mn STEEL No. of Rods (per Pk) (per Pk) KEN x kg -5110K 3.20 x kg -5120K 4.00 x kg -5130K Recommended Amperages Min. 70A 95A 130A Max. 100A 125A 170A Electrodes For Cast Iron S-NFC A Graphite coated iron-nickel alloy electrode for high strength jointing of cast iron and cold welding of cast iron, it deposits 95%Ni + 2%Fe weld metal. Can be used for repairing broken cast iron, joining of cast iron to steel and building up worn parts. Meets the following standards: AWS A 5.15 E Ni-C1 Din 8573 E Ni BG 11. FOR CAST IRON * s available on request Recommended Amperages 1.6* 2.0* Min. 50A 80A 120A Max. 90A 125A 180A of Rods (Per Pk) (Per Pk) KEN x kg -1030K 3.20 x kg -1040K 4.00 x kg -1050K Twist Grip Short Stub Electrode Holders Reduce fatigue and increase safety. All of the electrode is available for use and the angle allows the hand to remain away from the weld pool. The handle applies torque to the electrode clamp in the head. Type Recommended Amperage KEN A -1220K S-NFC A -1230K A -1240K Rating (Amps) Handle Colour KEN Yellow -6010K 400 Red -6110K 600 Red -6130K Page 703

5 WELDING 880 ARC (MMA) & TIG WELDERS Jaguar PFC Multi Voltage Inverter Welder Now you can have all the portability and performance of an inverter welder with a wide input voltage range of v. With the Jaguar PFC multi-voltage inverter welder you can carry out MMA welding with rutile, basic, stainless steel and cast iron electrodes, as well as TIG welding with scratch striking. The fan cooled unit can handle unstable voltages and offers stable output in the case of over/under voltages. It also allows for the use of long extensions (over 100m) and has Hot Start for easy starting, Arc Force for quality welds and Anti-Stick for reduced electrode sticking. Comes with carry case and accessories. Power Supply: 110/230V (DC) 50/60Hz single phase Current Fuse Rating: 150A Duty degrees C: 90A@25%, 140A@25% Protection class: IP22 Dimensions (L x W x H): 385 x 150 x 265mm. JAGUAR Description Current Voltage KEN-880 Jaguar PFC 150A K Cougar-S TM MMA Inverter Welder Kennedy Cougar-S EWT150S inverter welder is ideal for use with rutile, basic, stainless steel or cast iron MMA electrode welding using mm diameter rods including Tig-DC scratch. Features of the Cougar-S ETW150S: 230V single phase mains supply. Hot start - for easy starting. Arc force - for quality welds. Anti stick - reduces electrode sticking. Fan cooled. Dimensions (H x W x D): 240 x 305 x 130mm. COUGAR-S Description Current Voltage KEN-880 Cougar-S MMA 150A kg -3050K Tig Tungsten Electrodes All conform to ISO 6848 (DIN EN and AWS A Group 732 2% Ceriated Grey Tungsten Electrodes Suitable for both AC and DC welding but performs exceptionally well at low current settings in DC welding. A popular non-radioactive replacement for 2% Thoriated Tungsten Electrodes as like the thorium electrodes they are best used to weld carbon, stainless steels, nickel alloys, copper and titanium alloys. Also ideal for small and delicate welding. 0.8% Zirconiated White Tungsten Electrodes Ideal for high precision, exceptional quality AC welding on aluminium alloys as it retains a balled tip and has a high resistance to contamination. The current carrying capability is equal or greater than that of thoriated tungsten. Non-radioactive. Not suitable for DC welding. Electrode Type Diameter KEN-889 Ceriated 1.6mm -0120K Grey 2.4mm -0130K 3.2mm -0140K 2% Thoriated Red Tungsten Electrodes Most commonly used tungsten electrode. Suitable for both AC and DC welding on carbon, stainless steels, nickel, copper and titanium alloys. Preferred for their longevity and ease of use. Electrode Type Page 704 Diameter KEN mm -0820K Zirconiated 2.4mm -0830K White 3.2mm -0840K 4.0mm -0850K Electrode Type Diameter KEN mm -0510K Thoriated 1.6mm -0520K Red 2.4mm -0530K 3.2mm -0540K

6 Back Caps O Rings Tig Torches & Bodies Cup Gaskets Collet Bodies TIG WELDER ACCESSORIES & SPARES Collets 10N To suit WP17/18/26 torches. 885 All parts listed on this page Fully compatible with most other brands of Tig torches. Tig Torches Whether water or air cooled, all Kennedy Tig torches are lightweight and durable. They come supplied with a 12.5ft (3.8m) cable, and silicon rubber rigid or flexible head mouldings for greater heat resistance. Tig Torches - Come complete with a 12.5ft 3.8m cable Type & KEN-885 TTS017 Standard Rigid Head Tig Torch 150DC/120AC - Air Cooled -3200K TTF017 Flexible Head Tig Torch 150DC/120AC - Air Cooled -3300K TTS018 Standard Rigid Head Tig Torch 350DC/250AC - Water Cooled -3220K TTS026 Standard Rigid Head Tig Torch 200DC/160AC - Air Cooled -3240K TTF026 Flexible Head Tig Torch 200DC/160AC - Air Cooled -3340K Torch Bodies Made from tough ABS plastic with a silicone rubber head for greater heat resistance and durability. WP17 WP17 Standard torch body -6500K WP18 WP18 Standard torch body -6520K WP26 WP26 Standard torch body -6540K WP17FX WP17 Flexi torch body -6510K WP26FX WP26 Flexi torch body -6550K Back Caps BIN57Y To suit WP17/18/26 torches. Collets Torch Bodies Gas Lens To Suit KEN Y04 Short -7710K 57Y02 Long -7700K Ceramic Cups Gas Lens Ceramic AC/DC TIG Welding Spares Kit Can be used in AC or DC processes. Excellent arc starts at low amperages, popular in such applications as orbital tube and pipe manufacturing, thin sheet metal work or jobs where small and delicate parts are welded. Like Thoriated electrodes, they are best used to weld carbon and stainless steels, nickel alloys and titanium. Suitable for WP17, 18 and 26 Tig torches. Contents: 5x 1.6mm collets, 5x 1.6mm collet bodies, 5x 2.4mm collets, 5x 2.4mm collet bodies, 2x No.4 ceramic cups, 2x No.5 ceramic cups, 34 2x No.6 ceramic cups, 2x No.7 ceramic cups, PIECES 2x No.8 ceramic cups, 1x long back cap, 1x short back cap, 1x 1.6mm ceriated grey tungsten electrode, 1x 2.4mm ceriated grey tungsten electrode. Suitable For KEN-885 WP17, 18 & 26 Tig torches -3400K Bore KEN N22 1.0mm (0.040 ) -7210K 10N23 1.6mm ( 1/ 16 ) -7220K 10N24 2.4mm ( 3/ 32 ) -7230K 10N25 3.2mm ( 1/ 8 ) -7240K Collet Bodies 10N To suit WP17/18/26 torches. Bore KEN N29 0.5mm (0.020 ) -7290K 10N30 1.0mm (0.040 ) -7260K 10N31 1.6mm ( 1/ 16 ) -7270K 10N32 2.4mm ( 3/ 32 ) -7280K 10N28 3.2mm ( 1/ 8 ) -7250K Ceramic Cups - Standard Length 10N To suit WP17/18/26 torches. Bore KEN N50 1/ 4 (No. 4) -7360K 10N49 5/ 16 (No. 5) -7350K 10N48 3/ 8 (No. 6) -7340K 10N47 7/ 16 (No. 7) -7330K 10N46 1/ 2 (No. 8) -7320K 10N45 5/ 8 (No. 10) -7310K 10N44 3/ 4 (No. 12) -7300K Cup Gaskets To Suit KEN CG WP17/18/ K Gas Lens Body 45V24/25/26/27 To suit WP17/18/26 torches. Bore KEN V24 1.0mm (0.040 ) -7500K 45V25 1.6mm ( 1/ 16 ) -7510K 45V26 2.4mm ( 3/ 32 ) -7520K 45V27 3.2mm ( 1/ 8 ) -7530K Gas Lens Ceramics 54N To suit WP17/18/26 torches. Bore KEN N18 1/ 4 (No. 4) -7640K 54N17 5/ 16 (No. 5) -7630K 54N16 3/ 8 (No. 6) -7620K 54N15 7/ 16 (No. 7) -7610K 54N14 1/ 2 (No. 8) -7600K 54N19 5/ 8 (No. 10) -7650K Gas Lens Heatshield 54N01 Type KEN N01 Gas Lens Heatshield -7560K Page 705 WELDING

7 WELDING 880 MIG/MAG WELDERS Panther TM Dual Mig Welder EMW A-120A (DC) Output range. A high power single phase welder that operates from a standard 240V household outlet. Automatic wire speed control with manual override. Professional torch with trigger-controlled power and gas prevents undesired arcing and gas wastage. Low current performance - able to deliver a 50A minimum output for welding thin material easily. Accepts both 0.7kg and 5kg spools for maximum portability and economy. Heavy duty redesigned case for durability combined with low weight and portability. Can be used for flux (no gas) and Mig/Mag (gas) welding. Supplied complete with a smooth action, twin roller feed unit, accessories, integrated carrying handle and 2m mains cable. Suitable for automotive, farm, maintenance and contractor use. Conforms to TUV-GS, GOST, EMC, LVD and all relevant CE requirements. Insulation class H. Protection degree IP21. Welding capacity: steel wire: mm, stainless steel wire: 0.8mm, aluminium wire: 0.8mm, flux cored welding wire: mm. Maximum reel size 5kg. Contents: Flux cored wire coil 0.9mm x 0.2kg. Panther TM EMW-120 power supply. Hand held face shield with 1.8m cable, 10mm x 107mm glass. Earth clamp. Scratch brush and slag remover. 2m Mig torch. Instruction manual. Input voltage: 230V, 50/60Hz. Fuse rating: 10A. Phase: 1. Power consumption: 3.6kW max. Output current range: 50A - 120A (DC). Open circuit voltage: 30V. Dimensions (L x W x H): 480 x 275 x 380mm. Current Range KEN-880 Panther TM EMW120 50A - 120A 24.0kg -1920K Accessories: Shielding gas for use with most Mig wires. Bottles shown are also suitable for use with Migmates and similar welders. Connection Kit contains: 1x mini gas regulator, 1/ 16 ID x 600mm tube, 3/ 16 ID x 200mm tube, 1/ 16 x 3/ 16 hose reducer, 2x 8-12mm hose clips. Gas Type Contents KEN-885 Connection Kit -2400K Description KEN-884 Regulator -4010K See page 708 for additional Torches PANTHER Gas Bottles are Supplied Separately Leopard TM Dual Mig Welder EMW A-145A (DC) Output range. Automatic wire speed control with manual override. Professional torch with trigger-controlled power and gas prevents undesired arcing and gas wastage. Extra low current performance - able to deliver a 30A minimum output for welding very thin material easily. Accepts 0.7kg or 5kg spools for maximum portability and economy. Heavy duty case for durability. Can be used for flux (no gas) and Mig/Mag (gas) welding. Supplied complete with a smooth action, twin roller feed unit, accessories, 2m mains cable. Suitable for automotive, farm, maintenance and contractor use. Conforms to TUV-GS, GOST, EMC, LVD and all relevant CE requirements. Insulation class H. Protection degree IP21. Welding capacity: steel wire: mm, stainless steel wire: 0.8mm, aluminium wire: mm, flux cored welding wire: 0.8mm 1.2. Maximum reel size 5kg. Contents: Leopard TM EMW-150 power supply. 1.8m cable, 10mm 2. Earth clamp. 2m Mig torch. Flux cored wire coil 0.9mm x 0.2kg. Hand held face shield with 51 x 107mm glass. Scratch brush and slag remover. Instruction manual. Input voltage: 230V, 50/60Hz. Single phase. Power consumption: 3.7kW max. Fuse rating: 16A. Output current range: 30A - 145A (DC). Open circuit voltage: 31V. Dimensions (L x W x H): 680 x 285 x 410mm. See page 708 for additional Torches READY TO W ELD TWIN TURBO ROLLER F A N FEED COOLED LOW CURRENT2WARRANTY YEAR COMPATIBLE WITH BINZEL B15 GAS TORCH SPARES NO GAS Group 885 LEOPARD READY TO W ELD TWIN TURBO ROLLER F A N FEED COOLED LOW CURRENT2WARRANTY YEAR COMPATIBLE WITH BINZEL B15 GAS TORCH SPARES NO GAS Current Range KEN-880 Leopard TM EMW150 30A - 145A 27.5kg -1940K Page706 Gas Bottles are Supplied Separately

8 Tiger TM Compact Mig Welder EMW-170 Heavy-duty transformer and turbo fan cooling allows welding at higher power for longer periods. Automatic wire speed control with manual override for continuous and spot welding. Professional torch with trigger-controlled power and gas prevents undesired arcing and gas wastage. Extra low current performance - able to deliver a 30A minimum output for welding very thin material easily. Accepts 0.7kg, 5kg and 15kg spools for maximum portability and economy. Heavy duty case for durability. Mig/Mag (gas) welding only. Six position, stepped voltage regulator allows process selection to be pre-set. Supplied complete with a smooth action, twin roller feed unit, two large diameter solid wheels and 2m mains cable. Suitable for automotive, farm, maintenance and contractor use. Conforms to TUV-GS, GOST, EMC, LVD and all relevant CE requirements. Insulation class H. Protection degree IP21. Welding capacity: steel wire mm, stainless steel wire 0.8mm, aluminium wire mm. Maximum reel size: 15kg. Input voltage: 230V, 50/60Hz. Fuse rating: 16A. Phase: 1. Power consumption: 5.2kW (2.3 Output current range: 30A - 170A (DC). Open circuit voltage: 31V. dimensions (L x W x H): 80 x 45 x 57cm. Box dimensions (L x W X H): 84 x 35 x 52cm. Contents: Tiger EMW-170 power supply. 1.5m cable, 16mm 2. Earth clamp. 2.4m MIG torch. Mig wire reel 0.8mm x 0.2kg. See Page 740 Instruction manual. Current Range KEN-880 Tiger TM EMW170 30A - 170A 38kg -1960K Lion TM Compact Mig Welder EMW-220 Heavy-duty transformer and turbo fan cooling allows welding at higher power for longer periods. Automatic wire speed control with manual override. Professional torch with trigger-controlled power and gas prevents undesired arcing and gas wastage. The torch cable can be detached from the machine. 35A minimum output. Accepts 0.7kg, 5kg and 15kg spools for maximum portability and economy. Heavy duty case for durability. Mig/Mag (gas) welding only. Six position, stepped voltage regulator allows process selection to be pre-set. Supplied complete with a smooth action, twin roller feed unit, two large diameter solid wheels and 2m mains cable. Suitable for automotive, farm, maintenance and contractor use. Conforms to TUV-GS, GOST, EMC, LVD and all relevant CE requirements. Insulation class H. Protection degree IP22. Welding capacity: steel wire 0.6mm - 1mm, stainless steel wire 0.8mm, aluminium wire 0.8mm - 1.0mm. Maximum reel size: 15kg. Input voltage: 230V, 50/60Hz. Fuse rating: 16A. Phase: 1. Power consumption: 3.7kW max. Output current range: 30A - 220A (DC). Open circuit voltage: V. dimensions (L x W x H): 78 x 45 x 71cm. Box dimensions (L x W X H): 84 x 35 x 57cm. Contents: Lion EMW-220 power supply. 1.5m cable, 16mm 2. Earth clamp. 2.5m Mig torch. Mig wire reel 0.8mm x 0.2kg. Instruction manual. See page 708 for additional Torches MIG/MAG WELDERS TIGER 880 READY TO W ELD TWIN TURBO ROLLER F A N FEED COOLED LOW CURRENT2 YEAR COMPATIBLE WITH BINZEL B15 TORCH SPARES LION WARRANTY READY TO W ELD TWIN TURBO ROLLER F A N FEED COOLED LOW CURRENT2 YEAR COMPATIBLE WITH BINZEL B15 TORCH SPARES WARRANTY WELDING Current Range KEN-880 Lion TM EMW220 30A - 220A 45kg -1980K Feed Rollers for Kennedy Tiger & Lion Mig Welders Description KEN mm Feed Roller -2800K Page 707

9 885 MIG WELDER ACCESSORIES & SPARES Euro Connection Torches Fitted with EURO connectors, with insulated gas nozzles for use with mixed gases and a 4m supple, lightweight cable to improve productivity. 4m CABLE WITH FITTED LINER & STANDARD TIP Mig Torch Accessories Contact Tips & Tip Adaptors MB15 MB25 WELDING MTE-154 suits Kennedy Panther and Leopard. MTE-254 suits Kennedy Tiger and Lion. Compatible with Parweld and Binzel Torches. For Torch For Wire KEN-883 MTE K K K MTE K 154/ H.Duty -7220K 254/ K H.Duty -7320K K MTE Tip Adaptor -7500K Nozzles Conical Tapered Max. Wire s Standard Cable Rating Tip Length KEN-885 MTE A mm 4m -3080K MTE A mm 4m -3100K MTE A mm 4m -3120K Mig Torch Liners PVC-coated for use with steel wire. Colourcoded to indicate wire size: mm = Blue, mm = Red. ANM Cutting Nozzles Acetylene nozzle mix can be used with the majority of popular cutting torches. Plate thickness refers to mild steel. For Torch Style KEN-883 MTE Conical -7600K MTE Conical -7610K Tapered -7640K STD Conical -7620K PNM Cutting Nozzles 75mm long propane nozzle mix can be used with the majority of popular cutting torches. Nozzle Plate Diameter Thickness KEN-883 1/ 32 6mm -2010K 3/ 64 12mm -2020K 1/ 16 75mm -2030K 5/ mm -2040K 3/ mm -2050K 1/ 8 300mm -2060K 90 Welding Angle Clamp One man set up and operation, made from cast iron, copper plated spindle for spatter protection, T-Handle enables high pressure for secure clamping, easy fixing to a workbench or machine tool table. Nozzle Plate Diameter Thickness KEN-883 1/ 32 6mm -2110K 3/ 64 12mm -2120K 1/ 16 75mm -2130K 5/ mm -2140K 3/ mm -2150K 1/ 8 300mm -2160K Length For Wire (m) KEN K K K K Page708 KEN mm 05.3kg -0360K 90mm 10.5kg -0390K

10 A18 Mig Wire Reels Deposits C - 1.3% Mn weld metal for mild and medium tensile steels. Copper coat finish and double deoxidised. For use with CO2 or Ar-CO2 shielding gas. Made to BS 2901/1 : 1983 A18 & BS EN 440 G3 Si1. For welding mild steel and C-Mn steels such as boilers, tanks, pipework, machinery, vehicle chassis fabrication and shipbuilding. 0.7kg and 5.0kg reels are random wound. Both sizes are designed and packaged for use on Kennedy Dual Mig welders, Mini Migs, Migmates etc. Use with CO2 or Ar-CO2 shielding gas. 887 MIG WIRE Flux Core Gasless Wire General-purpose Mig wire with self-shielding flux core, allowing it to be used without the need for a separate shielding gas. Designed and packaged specifically for use on Kennedy Dual Mig welders, Mini Migs, Migmates etc. For welding mild steel and C-Mn steels such as boilers, tanks, pipework, machinery, vehicle chassis fabrication. 0.8mm diameter mini reels. Random wound and not layer wound. WELDING FOR MILD STEEL & C-Mn STEEL A18 BS kg Mini Reels FOR MILD STEEL & C-Mn STEEL A18 BS 2901 Wire Dia. KEN-887 A mm -1860K A mm -1880K A mm -1900K Reel KEN-887 FCG kg -1620K FCG kg -1640K Stainless Steel Mig Wire Ideal for welding stainless steels. It has increased silicon content for an improved weld that produces a smoother more consistent bead making it ideal for use where appearance is important. For use on stainless steel structures. Supplied on a precision layer wound reel for positive uninterrupted feeding. : 15kg. FOR STAINLESS 5.0kg Reels FOR MILD STEEL & C-Mn STEEL A18 BS 2901 Wire Dia. KEN-887 A mm -1960K A mm -1980K A mm -2000K 15kg Reels Use with CO2 or Ar-CO2 shielding gas. FOR MILD STEEL & C-Mn STEEL PLW 15kg Reels A18 BS 2901 *Precision layer wound for positive snag free feeding. BEST SELLER Wire Diameter KEN-887 *A mm -2060K *A MIG Wire - All prices 0.8mm are subject to -2080K possible surcharges *A due to continued 1.0mm volatility of -2100K material costs. *A Please contact 1.2mm your local branch -2120K for details. Type Wire Diameter KEN LSi 0.8mm 1.0mm -0520K -0530K 309LSi 1.0mm -0570K 0.8mm -0540K 316LSi 1.8mm -0550K 1.2mm -0560K MIG Wire - All prices are subject to possible surcharges due to continued volatility of material costs. Please contact your local branch for details. Page 709

11 WELDING 885 GAS WELDING & CUTTING Individual Fitted Welding Hoses Kink and crush resistant hoses with industry standard 3/ 8 BSP fittings on the regulator end. Hoses have safety check valves at the torch end to resist flashbacks. Oxygen fittings are right hand thread, fuel gas fittings are left hand thread. Manufactured to EN 559/BS EN ISO OXYGEN - Blue Hose, right hand thread. ACETYLENE - Red Hose, left hand thread. PROPANE - Orange Hose, left hand thread. Individual Fitted Welding Hoses EN 559/BS EN ISO 3821 Cylinder Trolleys Robust, heavy gauge steel, welded construction, with two large diameter wheels and solid tyres. For use with oxygen and/or acetylene cylinders. 16 pneumatic tyre. 3000K 3040K KEN g -2500K OXYGEN ACETYLENE PROPANE Hose Length DSCV Reg. Nut CTL-885 CTL-885 CTL-885 6mm 5m 1/ 4 3/ A -7958A - - 6mm 10m 1/ 4 3/ B -7958B - - 6mm 20m 1/ 4 3/ D -7958D - - 6mm 5m 3/ 8 3/ A -7959A -7967A 6mm 10m 3/ 8 3/ B -7959B -7967B 6mm 20m 3/ 8 3/ D -7959D - - 8mm 5m 3/ 8 3/ A -7961A - - 8mm 10m 3/ 8 3/ B -7961B - - 8mm 20m 3/ 8 3/ D -7961D mm 5m 3/ 8 3/ A -7963A -7971A 10mm 10m 3/ 8 3/ B -7963B -7971B 10mm 20m 3/ 8 3/ D -7963D -7971D Nozzle Cleaner Set Prolongs the life of gas welding and cutting nozzles. High strength, needle type files housed in an anodised aluminium flip-up pocket case. Pistol Type Spark Lighter For easy and rapid single-handed ignition of welding and cutting torches. Metal bodied. Uses standard cigarette lighter flints. Oxygen Regulators Designed with 2 gauges to indicate cylinder contents and outlet pressure. 4.0 Bar Oxygen Regulator Full 300 bar capacity Bar Oxygen Regulator Full 300 bar capacity. Bottom entry design, which is suited for top outlet cylinder valves. Fitted with 1/ 4 parallel threaded gauges, standard 3/ 8 BSP outlet and 5/ 8 BSP inlet connections. Gas Type KEN Bar Oxygen -4120K 4.0 Bar Oxygen -4140K 3060K 3020K Style Pack Quantity KEN-885 Pistol K Flints K Cup-Type Spark Lighter For easy and rapid single-handed ignition of welding and cutting torches. Style Pack Quantity KEN-885 Cup K Flints K Triple Flint Type Spark Lighter For easy and rapid single handed ignition of welding and cutting torches. When one flint wears, turn the triangular head to use the next flint. Argon & Acetylene Regulators Designed with two gauges to indicate cylinder contents and outlet pressure. Argon regulator outlet gauge is calibrated for flow 0-35lpm. Acetylene regulator has a calibrated flow rate of bar with a full 250 bar capacity. Features: Flow rates up to 80m 3 /h (2824 ft 3 /h) 300 bar capability. Features 2 gauges displaying cylinder contents and pressure.bottom entry design suited for top outlet cylinder valves. Fitted with 1/ 4 parallel threaded gauges. Fitted with standard 3/ 8 BSP outlet. Fitted with 5/ 8 BSP inlet connections. For Use With Cylinder MTL-985 Propane K Oxy/Acetylene K Oxy/propane K Oxy/Acetylene K Page710 Style Pack Quantity KEN-885 Triple K Flints 1 Head -7120K Gas Type KEN-884 Acet. Regulator -4200K Argon Regulator -4300K

12 PVC Welding Curtains PVC curtains for suspension from curtain poles. Standard sized curtains with snap-fasteners on both sides for joining to obtain total desired width. Supplied with reinforced holes in the upper edge and steel suspension rings. All standard curtains are made of pliable, self-extinguishing PVC material with flash point C. EN1598 for welding (fulfilling requirements on transmittance, reflectance, UV-stability and resistance to ignition). Supplied with steel curtain rings. WELDING CURTAINS & FLUIDS 885 Colour W x H KEN-885 Dark Green Reinforced 1300 x K Amber Hi-Vis 1300 x K Green Polished 1300 x K Dark Green Reinforced 1300 x K Green Polished 1300 x K Dark Green Reinforced 1300 x K Green Polished 1300 x K Amber Hi-Vis 1400 x K Flaw Inspection System Fast reliable method for visually inspecting and spot-checking surfaces of welds, exotic alloys or standard metals, highly stressed structural members, critical castings, shafts, gears, spindles, and any other hard part where identification of surface flaws is essential. Detects flaws such as cracks, pin holes, welding laps and porousness either during manufacture or on-site. A three-part system. SF1-500B is a cleaner. SF2-500B is a dye penetrant. SF3-500B is a developing fluid that reacts with the dye in SF2-500B to show small cracks in the weld. Each part supplied in an ozone friendly 500ml aerosol. Welder s Anti-Spatter Spray SW1-400C Solvent-based coating that is applied to metal before welding to prevent spatter from sticking to the metal. CO2 gas propelled aerosol. Totally nonflammable. Silicone free and easily removed with solvents prior to galvanising or painting. WELDING Flaw Detector Cleaner Spray SF1-500B Quick drying, powerful solvent for cleaning surfaces prior to testing. Removes contaminants including oils, greases and grime. SOL-732 SF1-500B 500ml -0240K Flaw Detector Dye Penetrant SF2-500B Highly sensitive red dye, for use when detecting flaws on metal components under normal lighting conditions. SOL-732 SF2-500B 500ml -0260K BIG VALUE 500ml Cans! Flaw Detector Developer SF3-500B White film to highlight any faults which have been detected when using Flaw Detector Penetrant. The product should be removed using Flaw Detector Cleaner Spray once cracks have been found and marked. SOL-732 SF3-500B 500ml -0280K SOL-732 SW1-400C 400g -0840K Maintenance Welder s Anti-Spatter Fluid Reduces the risk of joint puddling and greatly reduces preparation time prior to final painting. Does not affect any subsequent galvanising or painting operations. Evaporates under normal weld temperatures. Dichloromethane and silicone-free. Non-flammable, non-toxic, non-corrosive and biodegradable. WATER- BASED SOL-732 5ltr -9300K 20ltr -9310K Page 711

13 WELDING 885 WELDING HELMETS & SHIELDS Automatic Welding Helmets Automatically protects the operator from eye injuries caused by arc, leaving both hands free. Equipped with two sets of photosensors to sense arc light. Solar power relieves the need for batteries. Offers permanent UV/IR protection up to DIN 15 whilst in use. Welding shade can be easily selected by way of a side mounted adjustment dial. Automatically detects weld arc and switches from shade 4 to pre-selected shade (9, 10, 11, 12 or 13). Time to dark: 0.5ms. The shells are certified to BS EN 175: 1997 for eye and face protection. They can withstand a temperature of 650 C from the end of the electrode for five seconds, without burning. The electronic lenses are certified to DIN EN 169 and DIN 179. Solar powered, no battery required. Suitable for Arc, Mig/Mag, Tig and Plasma welding. With 2 year warranty. Jet Black Auto X The Kennedy Jet Black welding helmet is designed using the latest technology to automatically protect the user's eyes from arc light damage and leave both hands free to increase accuracy, efficiency and therefore productivity. Fitted with automatic filters that are transparent before welding, it enables the operator to observe the workpiece clearly. When striking the arc, the filter darkens automatically with immediate effect. When the arc goes out, the filter will become transparent again. The switching time from light to dark is approximately seconds, and the switching time from dark to light may be set at between second. Dual power: battery and solar. Light to dark: seconds Dark to light: seconds Control switching from shade to shade Auto on/off power source provided by two lithium batteries giving approx. 800 hours of working. High impact resistance. Clear view filter. Permanent UV/IR protection up to DIN 16. Complete with additional sweat band. Lightweight - less than 0.5kg. Large View Welding Helmets Durable, lightweight material is corrosion resistant and flame retardant. External sensitivity control provides clear vision both prior and during welding. Ultra high performance filters protect against UV and IR. Auto darkening lens automatically changes from light to dark shade when arc is struck. Special turnover headband mechanism offers greater comfort and reduces fatigue. Suitable for all kinds of welding types, including Tig low amperage welding, and can be used for grinding. High impact glass for increased safety. Dual powered: Solar and battery. Complies with DIN, ISO, EN379 safety standards and ANSI Z standards. View Field: 98 x 55mm UV/IR protection: DIN16 Light State: DIN4 Variable Shade: DIN9 - DIN13 Reaction Time: Sec Delay Time: 0.3 Sec Sec Sensors: Four infrared detectors Power Supply: Solar cells + CR2450 lithium battery (supplied PAN K) Power: On/Off Fully Automatic Operating temperature: -5 C - 55 C (23 F F) Storing temperature: -20 C - 70 C (-4 F F) Light to dark 0.5 milliseconds Pattern KEN-885 Plain Black -5100K Union Jack -5120K Page712 Solar Powered Solar Powered Light to dark 0.5 milliseconds Light to dark Type 0.1 milliseconds Type KEN-885 KEN-885 Auto variable g -5020K Auto variable g -5060K Spare Cover Lenses To protect liquid crystal cartridge unit. Supplied in packs of 10. Cover Lens Type CTL-885 Inner 107 x 45mm -7983K Outer 110 x 90mm -7983E Solar Powered Welder's Helmets The entry level to the Kennedy helmet range, both lift up over brow strap when not in use and accept plain and tinted lenses which are available separately. Lens size: 4 1/ 4 x 3 1/ K -7160K Visor Type KEN-885 Flip-up 434g -7150K Fixed 434g -7160K Lenses to Suit Helmets & Shields To protect the user from UV rays and weld spatter. *Standard UK size. Lens Type Colour/ Shade KEN-885 Sh K Sh K Green Shaded Sh. 10 Sh K -7415K 4 1/ 4 x 3 1/ 4* Sh K Sh K Polycarbonate Clear -7419K CR39 Antisplatter Clear -7418K Glass Clear -7411K Sh K 4 1/ 4 x 2 Green Shaded Sh K Sh K Polycarbonate Clear -7407K 4 1/ 4 x 2 CR39 Antisplatter Clear -7408K Glass Clear -7409K 110 x 60mm Green Shaded Polycarbonate Sh. 11 Clear -7422K -7426K 110 x 90mm Antisplatter Clear -7448K 4 1/ 2 x 5 1/ 4 CR39 Antisplatter Clear -7481K

14 Reversible Welder s Gauntlet Reversible (ambidextrous) lined, green welder s gauntlet, type A. CE approved to EN12477, EN388, EN407. : WELDING GLOVES Chrome Leather Welder s Clothing A range of economically priced rugged workwear manufactured from high quality selected chrome leather. Spatter-resistant and tear-resistant. The full range offers head-to-toe protection against weld spatter and grinding sparks. Suitable for use in workshops, foundries and on-site. Jackets Stud fastening jacket for full neck to waist protection against weld spatter and grinding sparks. With external side pocket, neck is lined with soft split leather for extra comfort. All seams have heavy duty stitching for durability and extended wear. CE approved to EN470-1 CAT II. Sleeves Can be used independently or in conjunction with an apron or other garment to offer optimum protection of the lower arm and elbow. With elasticated openings. All seams have heavy duty stitching for durability and extended wear. One size. CE approved to EN470-1 CAT II. WELDING X.X.X.4.X per Pr KEN g -1940K Heavy Duty Welder s Gauntlet Full five finger welder s gauntlet manufactured from select split leather with a full cotton lining with a one piece back. Reinforced palm and thumb for increased wear with no exposed seams to burn. Kevlar sewn throughout. Tested to EN388: 2003 & EN407: : X per Pr TFF g -1580K Grey Leather Tig Welder s Gloves Constructed from soft high quality nappa leather for the palm, and stiff 150mm chrome leather cuff. The soft leather palm and fingers offer a superb feel and good durability for precision welding. Good comfort and flexible with a good level of dexterity. 360mm overall length. Approved to EN388: EN12477: Type B - EN420: Dexterity Level 5. : 10. Colour KEN-885 Grey Large -8160K Grey X-Large -8170K Red Large -5222K Red X-Large -5223K Now Available in RED Aprons Generous fit for full torso and upper leg protection against weld spatter and grinding sparks, whilst offering freedom of movement for the wearer. All seams have heavy duty stitching for durability and extended wear. Available in a choice of tie or buckle fastening. CE approved to EN470-1 CAT II. Colours: available in a choice of grey or red. Colour KEN-885 Grey 45cm -8220K Red 45cm -5310K Gaiters For wearing over workshoes to protect against weld spatter and grinding sparks. With velcro fastening on back of calf and buckle adjustment around shoe. Double stitched and riveted seams for extra heavy duty use. CE approved to EN470-1 CAT II. : 35cm. KEN cm -8260K Welder s Caps Comfortable, durable and washable welder s caps. Double stitched construction with absorbent cotton sweat band. Can be worn with the peak to the rear when a screen is used. New improved version with taped, reinforced internal seams for extra durability and improved comfort. EN Type B per Pr TFF g -1650K Colour W x L (cm) KEN-885 Tie Fastening Grey 60 x K Grey 60 x K Red 60 x K Buckle Fastening Grey 60 x K Red 60 x K Now Available in RED WDA / 8 35g -5500K 7 1/ 4 35g -5510K 7 3/ 8 35g -5520K 7 1/ 2 35g -5530K 7 5/ 8 40g -5540K 7 3/ 4 40g -5550K Page 713

15 741 OIL & CHEMICAL STORAGE 742 SPILL RESPONSE 904 BATTERIES 904 TORCHES Page Page Page Page IDENTITY DISCS 941 MECHANICAL LIFTING EQUIPMENT 942 SLINGS 945 CASTORS Page Page Page Page FLOOR MATTING 949 ARCHITECTURAL HARDWARE 950 LOCKOUT & TAGOUT SYSTEM 950 PADLOCKS Page Page Page Page ANTI-SLIP FLOOR TAPES 964 HAZARD TAPES 978 ROPE, STRAPS & CHAIN 984 TARPAULINS Page Page Page Page HANDLING 986 INSULATION TAPE 992 TRAFFIC MANAGEMENT 996 FIRST AID Page Page Page Page

16 SITE MAINTENANCE Groups Contents Description Group Page Anti - Slip Floor Tapes Architectural Hardware Batteries Castors Chalk First Aid Floor Matting Hand Brushes Handling Hazard Tapes Identity Discs Insulation Tape Lockout & Tagout System Mechanical Lifting Equipment Oil & Chemical Storage Padlocks Rope & Chain Fittings Rope, Straps & Chain Slings Spill Response Tarpaulins Torches Traffic Management Grading ion High performance industrial tooling designed for continuous use applications on machine tools where repeatability and long tool life are of critical importance. Professional Industrial tooling that has enhanced features and benefits demanded by craftsmen and professional users. Industrial Designed for regular use in industrial applications. Manufactured to stringent quality levels and international standards. Workshop Standard quality tooling for use by tradesmen and generally industrial use. Maintenance s designed for general maintenance of machines, workshops, garages and some household applications. Home Improver DIY quality tooling. Designed for home use and light industrial applications. Page 715

17 741 OIL &CHEMICAL STORAGE Oil-Storage Recommendations Who needs to comply? Any industrial, commercial or institutional site storing 200 litres or more of oil or fuel above ground in one or more containers. What is required? All containers storing oil or fuel, whether a drum, an IBC (Intermediate Bulk Container) or a tank, must be sufficiently bunded within themselves or stood on a spill pallet or drip tray with sufficient capacity to contain either 110% of the contents of the largest container or 25% of the total capacity stored, whichever is the greater. Does your operation comply with the latest Safety Management Systems? Workfloors Perfect for machine cleaning and lubrication areas Versatile modular systems to allow bespoke configuration. All sizes of workfloor have the same 15cm height for easier loading and unloading. Grates can be removed for cleaning EXTENDED Workfloor Ramp RANGE Safe for use with any size of workfloor Integral joining strip ensures that it stays in position Ribbed surface for better grip. Storing oils and chemicals without the correct safety products in use could leave you with a hefty fine - and a massive clean-up bill! 4 Drum SWL 2700kg Ramp 4 Drum In-Line SWL 2700kg 2 Drum SWL 1350kg Page 716 Dimensions (cm) Sump (ltr) SOL-741 SW-2 2 Drum 160 x 80 x A SW-4 4 Drum 160 x 160 x B SW-4IL 4 Drum In-line 260 x 90 x C SWR-1 Ramp 129 x 81 x R

18 Spill Pallets Tough 100% high impact polyethylene construction. Corrosion resistant Generous sump capacities are large enough to comply with the regulations Grates can be removed for cleaning 4 Drum pallet has a low loading height of only 28cm 4 Drum In-Line pallet is ideal for instances where space is at a premium - The unique design allows for the drums to be stored length wise along a wall while still complying with the regulations 741 OIL & CHEMICAL STORAGE IBC Spill Pallets Single IBC Spill Pallet Unique design is complete with a dispensing well for the splashproof dispensing of fluids from the IBC Can be used with any type of IBC with an integral pallet Double IBC Spill Pallet The largest polyethylene spill pallet available Can be used for a variety of applications including the regulation compliant storage of two 1000ltr IBCs or up to eight 205ltr drums Strong polyethylene rotationally moulded design ensures that there is no distortion of the side walls when under load 2 Drum SWL 1350kg Single SWL 2000kg 4 Drum SWL 2700kg Dimensions (cm) Sump (ltr) SOL-741 SDP-2 2 Drum 130 x 75 x A SDP-4 4 Drum 139 x 129 x A SDP-4L 4 Drum In-line 245 x 66 x L All Weather Spill Pallets 4 Drum In-Line SWL 2700kg A spill pallet full of rain water does not offer much protection should a drum leak. Where pallets are not kept under a shelter, make use of this unique design. Includes integral ground anchoring points for stability in exposed locations With dual lockable shutter doors allowing access from both sides Base fork lift pockets for safe transportation Single user friendly with lockable roll door Dimensions (cm) Sump (ltr) SOL-741 SSP110 Single 200 x 149 x S SSP114 Double 245 x 145 x T All Weather IBC Spill Pallets A spill pallet full of rain water does not offer much protection should a drum leak. Where IBCs are not kept under a shelter, make use of this unique design. Heavy duty vinyl tarp cover Protects against weather and foliage debris Single SWL 1500kg Double SWL 4000kg Double SWL 2500kg 2 Drum SWL 2700kg 4 Drum SWL 2700kg Dimensions (cm) Sump (ltr) SOL-741 SPSP-2 2 Drum 156 x 110 x X SPSP-4 4 Drum 156 x 173 x Y Dimensions (cm) Sump (ltr) SOL-741 CDIBC-1 Single 126 x 135 x D CDIBC-2 Double 256 x 135 x E Page 717

19 741 OIL & CHEMICAL STORAGE Drum Trolley Easy to use unit combines safe transport, storage and dispensing from drums all in one Any spills that occur during dispensing are safely stored in the sump Simple to use one person operation Corrosion resistant 100% polyethylene construction Drum Racker & Stacker For safe storage and dispensing applications put one or more of these units in place The base unit can be used on its own for two drums, or up to two levels of stackers can be used for a maximum storage of six drums Corrosion resistant 100% polyethylene construction Drum Riser Drum Base Dimensions (cm) Sump (ltr) SOL-741 SDT- 230 Single 81 x 174 x T Drum Funnel & Tray Drum Funnel An essential item when filling either a drum or IBC, particularly with waste fluids Designed to ensure that there are no spills with an integral lid so that the funnel can be left in place when not in use Fits over the top of a 205ltr drum Corrosion resistant 100% polyethylene construction Drum Tray Where there is only one drum in use in an area, the Oil Storage Regulations state that a drum tray with a capacity that is 25% of the size of the drum is sufficient - This circular tray meets the requirement Ideal as a temporary bund for smaller items during maintenance operations, including batteries Corrosion resistant 100% polyethylene construction Item Dimensions (cm) Sump (ltr) SOL-741 SF-20L Funnel 61 dia x X SOT-8 Tray 87 dia x T Page718 Drum Funnel Drum Tray Item Dimensions (cm) Sump (ltr) SOL-741 SDS-B2 Drum Base 137 x 135 x B SDS-R2 Drum Riser 137 x 94 x R Salvage Container Where a drum is damaged or leaking, UN transport regulations require that it is transported in a leakproof container - this container fully meets these regulations The 100% polyethylene construction ensures compatibility to a broad band of chemicals and oils The lid is fully threaded and can be tightened using a bar or piece of timber across the slots The moulded design allows for lifting by a fork-lift or sling Item Dimensions (cm) Sump (ltr) SOL-741 SSD- 360 Salvage Drum 81 dia x B Absorbent Drum Pads Cut to fit exactly on the top of a 205ltr drum. Help keep a dispensing area free of leaks and drips. Maintenance grade absorbent material. Each drum pad will absorb up to 1ltr of most industrial fluids. PACK OF 5 Application Absorbs Diameter Pack Per Pad Qty SOL-742 MPA5656 Maintenance 1.0 ltr 56cm B

20 Bench Trays For use in a laboratory or other areas where small containers are in use and it is essential that any spills are contained Removable grate for easy cleaning 741 OIL & CHEMICAL STORAGE Drum Trays Suitable for the safe storage of 20ltr drums, fluid measures and other common workshop items Highly durable construction Fully nestable (without grates) Stand-On Trays With removable grates. Unique non-slip texture Item Dimensions (cm) Sump (ltr) SOL-741 SW-T1 Bench Tray 63 x 55 x T Drum Cupboards Provide a neat and tidy solution to the storage of drums and containers of various sizes up to 205ltr Fully weather-resistant With lockable doors and integral sumps Corrosion resistant 100% structural grade polyethylene construction With removable grates Suitable for battery storage SSC-CAB1 EXTENDED RANGE SSC-CAB4 SSC-CAB2 Dimensions (cm) Sump (ltr) SOL-741 SGST-20 Small 60 x 40 x M SGST-30 Medium 80 x 40 x N SGST-40 Large 80 X 60 x P Stand-In Trays Without grate 20 ltr 40 ltr 30 ltr Dimensions (cm) Sump (ltr) SOL-741 SGST-20 Small 60 x 40 x B SGST-30 Medium 80 x 40 x C SGST-40 Large 80 X 60 x D Small Container Trays Small drums are just as likely to leak or spill as large ones Three different sizes cope with drums up to 25ltr Corrosion resistant 100% polyethylene construction With removable grates 30 ltr 40 ltr 20 ltr SSC-CAB5 SWB4 SWB1 SWB2 No. of Grates Dimensions (cm) Sump (ltr) SOL-741 SSC-CAB x 44 x H SSC-CAB x 57 x J SSC-CAB x 92 x M SSC-CAB x 92 x L Dimensions (cm) Sump (ltr) SOL-741 SWB1 1 Drum 55 x 55 x A SWB2 2 Drum 72 x 46 x B SWB4 4 Drum 92 X 72 x D Page 719

21 SPILL RESPONSE Do your employees know which absorbent grade should be used for different spills? Maintenance Absorbs All Fluids - Grey/Black General maintenance absorbents are made of pure meltblown polypropylene suitable for spills of all non-aggressive chemicals, oil and water based fluids. The most commonly used spill response product. A must have part of most emergency response plans. Ideal for use in industrial situations where many different kinds of liquids are present at the same time. Available in lightweight, mediumweight and heavyweight types for a wide range of response requirements. Maintenance absorbents are available as pads, rolls, socks, pillows and in a range of spill kits. Oil-Only Repels Water - White Always white in colour for easy recognition and to alert to the start of a leak. Hydrophobic - Oil-only absorbents do not absorb water making them ideal for any outdoor environment where oil is a hazard and must be removed. Floats on water - even when fully saturated with oil, allowing for easy pick up and disposal. Available in lightweight, mediumweight and heavyweight types for a wide range of response requirements. Oil-only absorbents are available as pads, rolls, socks, pillows and in a range of spill kits. Also available as booms specifically designed for use on open water. Chemical Also known as Universal - Yellow Always yellow in colour for easy recognition and to alert users that once used the product must be handled in full PPE clothing and disposed of in the correct way. For use with water based fluids and aggressive chemicals, oils and solvents. Not suitable for use on water. Can be used with agressive chemicals such as acids, kerosene and detergents. Chemical absorbents are made of pure meltblown polypropylene. Available in lightweight, mediumweight and heavyweight types for a wide range of response requirements. Chemical absorbents are available as pads, rolls, socks, pillows and in a range of spill kits. Page720

22 Essential Light Absorbents Designed to be simple and without unneccessary frills Especially suited to low-volume, high-frequency use Ideal replacement for granules Lint-free Works with Spill Depot to ensure site compliance and fast access - see page 728 Hazard level: Low to moderate Typical spill volume: Low Frequency of use: High SPILL RESPONSE Performance and endurance combined in a lightweight design. A straight forward and highly cost effective solution to spill control. 742 Maintenance - Absorbs All Fluids - Grey/Black For use with water based fluid spills and non-aggressive chemicals and oils. Not suitable for use on water. Oil-Only - Repels Water - White Hydrophobic absorbent can be used on water. Will float even when oil laden. Chemical (Universal) - Yellow For use with water based fluids and aggressive chemicals, oils and solvents. Not suitable for use on water. Essentials - Light Absorbent Pads 0.5 ltr Per Pad 50cm x 40cm Essentials - Light Absorbent Rolls 50cm x 40cm Lightweight Oil-Only Pad 50cm x 40m 50 ltr Per Roll 50cm x 40m Light Maintenance Roll Light Oil-Only Roll Light Chemical Pad 50cm x 40cm Light Chemical Roll 50cm x 40m Application Absorbs Dimensions Pack Per Pad W x L Qty SOL-742 SMP501 Maintenance 0.5 ltr 50cm x 40cm J SMP K SMP501 Oil-Only 0.5 ltr 50cm x 40cm H SMP S SMP501 Chemical 0.5 ltr 50cm x 40cm D SMP C Application Absorbs Per Roll Dimensions W x L Pack Qty SOL-742 EMR50 Maintenance 50 ltr 50cm x 40m R EOOR50 Oil-Only 50 ltr 50cm x 40m R ECR50 Chemical 50 ltr 50cm x 40m R Page 721

23 742 SPILL RESPONSE Plus Medium Absorbents The mid-range, all-round choice for onsite spill management Medium weight design featuring single-side coverstock for added strength and tear resistance Low-lint release for a cleaner job Multiple perforations for improved productivity. Performance and endurance, combined. Legal compliance, assured Works with Spill Depot to ensure site compliance and fast access - see page 728 Hazard level: Moderate to high Typical spill volume: Medium Frequency of use: Medium to high Medium weight design with coverstock for added strength The Workshop Essential. A mid to high end, balanced solution. Optimised for increased absorption per-pad. Maintenance - Absorbs All Fluids - Grey/Black For use with water based fluid spills and non-aggressive chemicals and oils. Not suitable for use on water. Oil-Only - Repels Water - White Hydrophobic absorbent can be used on water. Will float even when oil laden. Chemical (Universal) - Yellow For use with water based fluids and aggressive chemicals, oils and solvents. Not suitable for use on water. Solent Plus Medium Absorbent Pads 50cm x 40cm Medium Maintenance Pad Solent Plus Medium Absorbent Rolls Medium Maintenance Roll 50cm x 40cm Medium Chemical Pad 90cm x 40m 140 ltr Per Roll Medium Oil-Only Roll Medium Oil-Only Pad 50cm x 40cm 50cm x 40m 80 ltr Per Roll 50cm x 40m 0.8 ltr Per Pad Application Absorbs Per Pad Dimensions W x L Pack Qty SOL-742 PMP503 Maintenance 0.8 ltr 50cm x 40cm J POP100 Oil-Only 0.8 ltr 50cm x 40cm R PCP504 Chemical 0.8 ltr 50cm x 40cm A Page722 Medium Chemical Roll Application Absorbs Per Roll Dimensions W x L Pack Qty SOL-742 SMP501 SMP504 Maintenance 80 ltr 140 ltr 50cm x 40m 90cm x 40m C -4110L SMP501 SMP504 Oil-Only 80 ltr 140 ltr 50cm x 40m 90cm x 40m T -4410V SMP501 SMP504 Chemical 80 ltr 140 ltr 50cm x 40m 90cm x 40m C -4710D

24 SPILL RESPONSE 742 Maintenance Pillow Oil-Only Pillow Solent Plus Absorbent Pillows 3.5 ltr Per Pillow Chemical Pillow Solent Plus Absorbent Socks Maintenance Sock 5 ltr Per Sock 7.5cm x 1.2m 7.5cm x 3.0m 12.5 ltr Per Sock Application Absorbs Per Pillow Dimensions W x L Pack Qty SOL-742 SMC303 Maintenance 3.5 ltr 28cm x 38cm F SOC303 Oil-Only 3.5 ltr 28cm x 38cm G SCC303 Chemical 3.5 ltr 28cm x 38cm E Solent Plus Absorbent Booms 7.5cm x 1.2m 4 ltr Per Sock Oil-Only Sock 7.5cm x 3.0m 10 ltr Per Sock 12cm x 3.0m Oil-Only Boom 80 ltr Per Boom Chemical Sock 30 ltr Per Boom 20cm x 3.0m 7.5cm x 1.2m 4 ltr Per Sock 7.5cm x 3.0m 10 ltr Per Sock Can be connected to other to create longer spans Application Absorbs Dimensions Pack Per Boom W x L Qty SOL-742 SBO123 Oil-Only 30 ltr 12cm x 3.0m J SBO ltr 20cm x 3.0m L Application Absorbs Dimensions Pack Per Sock W x L Qty SOL-742 PMS812 Maintenance 5 ltr 7.5cm x 1.2m N PMS ltr 7.5cm x 3.0m P POS812 Oil-Only 4 ltr 7.5cm x 1.2m X POS ltr 7.5cm x 3.0m Z PCS812 Chemical 4 ltr 7.5cm x 1.2m H PCS ltr 7.5cm x 3.0m K Page 723

25 742 SPILL RESPONSE Prime Heavy Absorbents Heavyweight design - 25% more absorption than Solent Plus A heavyweight design featuring a coverstock, the 25% increase in loft provides improvement in absorbent capacity from 0.8 litres to 1.0 litre per pad Works with Spill Depot to ensure site compliance and fast access - See page 728 Hazard level: High Typical spill volume: High Frequency of use: Low to medium Enhanced performance-per-pad - optimised for higher capacity and quicker wicking. Do more, with less product and lower overall cost. Maintenance - Absorbs All Fluids - Grey/Black For use with water based fluid spills and non-aggressive chemicals and oils. Not suitable for use on water. Oil-Only - Repels Water - White Hydrophobic absorbent can be used on water. Will float even when oil laden. Chemical (Universal) - Yellow For use with water based fluids and aggressive chemicals, oils and solvents. Not suitable for use on water. Solent Prime Heavy Absorbent Rolls Heavy Maintenance Roll 100 ltr Per Roll 50cm x 40m Solent Prime Heavy Absorbent Pads Heavy Maintenance Pad 50cm x 40cm 50cm x 40cm 1.0 ltr Per Pad 50cm x 40cm Heavy Oil-Only Pad Heavy Chemical Roll 180 ltr Per Roll 90cm x 40m Application Absorbs Per Roll Dimensions W x L Pack Qty SOL-742 SPMR100 Maintenance 100 ltr SPMR ltr 50cm x 40m 90cm x 40m D -3856F SPOR100 SPOR180 Oil-Only 100 ltr 180 ltr 50cm x 40m 90cm x 40m D -3866F SPCR100 SPCR180 Chemical 100 ltr 180 ltr 50cm x 40m 90cm x 40m D -3846F Solent Prime Heavy Absorbent Rolls 40 ltr Per Roll Heavy Maintenance ROLL N BOX Heavy Oil only ROLL N BOX 40cm x 20m Heavy Oil-Only Roll 100 ltr Per Roll 50cm x 40m 40cm x 20m Medium Chemical Pad Application Absorbs Per Roll Dimensions W x L Pack Qty SOL-742 PPMP1 Maintenance 1.0 ltr 50cm x 40cm B SPOP1 Oil-Only 1.0 ltr 50cm x 40cm B SPCP1 Chemical 1.0 ltr 50cm x 40cm B Page724 Portable format - for fantastic absorption on the move! Heavy Chemical ROLL N BOX 40cm x 20m Application Absorbs Per Roll Dimensions W x L Pack Qty SOL-742 SMR40 Maintenance 40 ltr 40cm x 20m M SOOR40 Oil-Only 40 ltr 40cm x 20m M SCR40 Chemical 40 ltr 40cm x 20m M

26 Sustainably Sourced - Ultra-Absorbent Solent s Highest Performing Absorbent - absorbency rates better than or equal to other absorbents - at no extra cost A new generation of sustainably-sourced Eco-Fibre absorbents utilising the latest Nu-Dri Technology Third generation coverstock supplies strength and wiping efficiency Solent ULTRA represent a new generation of sustainably sourced products Hazard level: Moderate to high Typical spill volume: Medium Frequency of use: Medium to high Nu-Dri is a trademark of Lubetech Industries New Improved! Unleashing the Absorbent Power of Natural Fibres Maintenance Grade - Utilising wood cellulose from managed forests. For general uses. With the versatility to absorb a wide range of fluids including both water and oils at the same time. Oil Only Grade - Proprietary processed natural cotton specially adapted to absorb oil spill from both land and water. With a proprietary hydrophobic treatment:- absorbs oil only, rejects water and retains buoyancy even when laden. ULTRA Absorbent Socks SPILL RESPONSE 742 A new generation of sustainably-sourced Eco-Fibre absorbents. Utilising naturally-occurring cottons and wood cellulose from managed forests. Third generation coverstock supplies strength and wiping efficiency. Maintenance - Absorbs All Fluids - Grey/Black For use with water based fluid spills and non-aggressive chemicals and oils. Not suitable for use on water. Oil-Only - Repels Water - White Hydrophobic absorbent can be used on water. Will float even when oil laden. New Improved! ULTRA Maintenance Sock 4.0 ltr Per Sock ULTRA Oil-Only Sock Application Absorbs Dimensions Pack Per Sock W x L Qty SOL-742 SUMS4 Maintenance 4.0 ltr 7.5cm x 1.2m M SUOS4 Oil Only 4.0 ltr 7.5cm x 1.2m R ULTRA Absorbent Pads New Improved! ULTRA Absorbent Rolls New Improved! ULTRA Maintenance Pad ULTRA Maintenance Roll EXTENDED RANGE 0.8 ltr Per Pad 62 ltr Per Roll 37cm x 38m 48cm x 38cm ULTRA Oil-Only Pad 1.4 ltr Per Pad ULTRA Oil-Only Roll 90 ltr Per Roll Application Absorbs Dimensions Pack Per Pad W x L Qty SOL-742 SUMP1 Maintenance 0.8 ltr 48cm x 38cm K SUOP1 Oil-Only 1.4 ltr 48cm x 38cm P Application Absorbs Dimensions Pack Per Roll W x L Qty SOL-742 SUMR90 Maintenance 62 ltr 37cm x 38m L SUOR90 Oil-Only 90 ltr 37cm x 38m Q Page 725

27 742 SPILL RESPONSE Kits Many situations require a permanent supply of absorbents to be on hand. Solent Plus spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltr up to 240ltr. They are packed with sufficient absorbents to cope with a spill up to the size shown. 10 ltr Kits - In Holdalls For quick response to smaller spills. Kits contain: 10 x Solent Prime Pads (1 ltr/pad) 1 x Solent Plus 1.2m sock (4 ltr/sock) 1 x 1kg Putty Seal pre-mixed drum plug mix (SOL R) 2 x Disposal bags and ties (LUT D) 10Ltr Maintenance - Absorbs All Fluids - Grey/Black For use with water based fluid spills and non-aggressive chemicals and oils. Not suitable for use on water. Oil-Only - Repels Water - White Hydrophobic absorbent can be used on water. Will float even when oil laden. Chemical (Universal) - Yellow For use with water based fluids and aggressive chemicals, oils and solvents. Not suitable for use on water. 25 ltr Kits - In Small Bins Kits contain: 17 x Solent Prime pads (1.0 ltr/pad) 1 x Solent Plus 1.2m sock (4 ltr/sock) 2 x Solent Plus pillows (3.5 ltr/pillow) 4 x Disposal bags and ties (LUT D) 25Ltr Nominal Supplied In Application SOL-742 PMK010B 10 ltr Holdall Maintenance -6100A POK010B 10 ltr Holdall Oil-Only -6110B PCK010B 10 ltr Holdall Chemical -6120C 15 ltr Kits - In Carriers Kits contain: 12 x Solent Prime pads (1 ltr/pad) 1 x Solent Plus 1.2m sock (4 ltr/sock) 1 x Disposal bag and tie (LUT D) 15Ltr Nominal Supplied In Application SOL-742 PMK025A 25 ltr Small Bin Maintenance -6300A POK025A 25 ltr Small Bin Oil-Only -6310B PCK025A 25 ltr Small Bin Chemical -6320C 35 ltr Kits in Cube Bag Kits contain: 15 x Solent Prime pads (1.0 ltr/pad) 2 x Solent Plus 3.0m sock (10 ltr/sock) 1 x Disposal bag and tie (LUT x Instruction sheet 35Ltr Nominal Supplied In Application SOL-742 PMK015B 15 ltr Carrier Maintenance -6130M POK015B 15 ltr Carrier Oil-Only -6135N PCK015B 15 ltr Carrier Chemical -6140P 20 ltr Kits - In Holdalls Kits contain: 15 x Solent Prime pads (1 ltr/pad) 2 x Solent Plus 1.2m sock (4 ltr/sock) 2 x Disposal bags and ties (LUT D) 20Ltr Nominal Supplied In Application SOL-742 SMK35Y 35 ltr Cube Bag Maintenance -5150S SOK35Y 35 ltr Cube Bag Oil-Only -5160T SCK035Y 35 ltr Cube Bag Chemical -5170V Personal Protective Equipment (PPE) Because the PPE requirements of handling liquids varies in accordance with the specific liquids being used, it is assumed that suitable PPE will already be available on site and PPE is not supplied with these kits as standard. If you require any further assistance with obtaining PPE supplies please contact your local branch or repesentative - or ask for our Industrial Supplies Catalogue. Nominal Supplied In Application SOL-742 PMK020C 20 ltr Holdall Maintenance -6150D POK020C 20 ltr Holdall Oil-Only -6160E PCK020C 20 ltr Holdall Chemical -6170F Page726

28 Kits 50 ltr Kits - In Holdalls Kits contain: 35 x Solent Prime pads (1.0 ltr/pad) 3 x Solent Plus 1.2m sock (4 ltr/sock) 3 x Solent Plus pillows (3.5 ltr/pillow) 5 x Disposal bags and ties (LUT D) EXTENDED RANGE 50Ltr SPILL RESPONSE 240 ltr Kits - In Wheeled Bins Kits contain: 200 x Solent Prime pads (1.0 ltr/pad) 12 x Solent Plus 1.2m sock (4 ltr/sock) 10 x Solent Plus pillows (3.5 ltr/pillow) 18 x Disposal bags and ties (LUT D) Ltr EXTENDED RANGE Kits - Complete with holdall Nominal Supplied In Application SOL-742 PMK050S 50 ltr Holdall Maintenance -6200G POK050S 50 ltr Holdall Oil-Only -6210H PCK050S 50 ltr Holdall Chemical -6220J Refills - Absorbents and bags only, as listed above Nominal Supplied In Application SOL-742 PMKR050S 50 ltr - Maintenance -6201H POKR050S 50 ltr - Oil-Only -6211J PCKR050S 50 ltr - Chemical -6221K 120 ltr Kits - In Wheeled Bins Kits contain: 75 x Solent Prime pads (1.0 ltr/pad) 9 x Solent Plus 1.2m sock (4 ltr/sock) 8 x Solent Plus pillows (3.5 ltr/pillow) 10 x Disposal bags and ties (LUT D) EXTENDED RANGE Kits - Complete with wheeled bin Nominal Supplied In Application SOL-742 PMK120B 120 ltr Wheeled Bin Maintenance -6350D POK120B 120 ltr Wheeled Bin Oil-Only -6360E PCK120B 120 ltr Wheeled Bin Chemical -6370F Refills - Absorbents and bags only, as listed above Nominal Supplied In Application SOL-742 PMKR120B 120 ltr - Maintenance -6351E POKR120B 120 ltr - Oil-Only -6361F PCKR120B 120 ltr - Chemical -6371F 120Ltr Kits - Complete with wheeled bin Nominal Supplied In Application SOL-742 PMK240B 240 ltr Wheeled Bin Maintenance -6400G POK240B 240 ltr Wheeled Bin Oil-Only -6410H PCK240B 240 ltr Wheeled Bin Chemical -6420J Refills - Absorbents and bags only, as listed above Nominal Supplied In Application SOL-742 PMKR240B 240 ltr - Maintenance -6401H POKR240B 240 ltr - Oil-Only -6411J PCKR240B 240 ltr - Chemical -6421K Spill Kit Audit Covers Yellow, weatherproof PVC covers with elasticated cord to allow fitting over the top of a 2-wheeled wheelie bin spill kit. A4 sized clear pouch for inserting audit record sheet. Tamperproof tape fitted on the container and cover indicates whether any of the contents have been used. Depleted spill kits are classified as ISO nonconformity. Available in sizes to fit wheelie bins of capacities: 120 and 240ltr. To Fit 2 Wheeled Bin SOL-742 AVC ltr -5440V AVC ltr -5540V Page 727

29 742 SPILL RESPONSE SPILL DEPOT Engineered Dipsensing Solution Avoids the need to use stock from spill kits (designed for emergencies) to satisfy everday requirements Versatile modular system - optional lockable cabinet Spindle location cand be adjusted to suit varying roll sizes EXTENDED RANGE Engineered to provide compliance in a variety of locations, wherever spill response is required, providing an effective dispensing solution for pads and rolls. Can be free-standing or wall mounted Powder-coated steel construction Can also be used with 20 litre spill Tray MSD42 MSD45 MSD43 MSD41 Optional Drip Tray Fits into bottom of cabinet. Spill Depot Configuration Dimensions W x D x H SOL-742 MSD41 1 Bay 60 x 45 x 60cm -8329G MSD42 2 Bays 60 x 45 x 127cm -8330H MSD43 3 Bays 60 x 45 x 187cm -8331J MSD44 1 Bay + Cabinet 60 x 45 x 127cm -8310K MSD45 2 Bays + Cabinet 60 x 45 x 187cm -8332K Spill Barrow This superb product is a must-have where granular absorbents are used The 60ltr front hopper is fitted with a lid and can be used for granular absorbents, salt or grit The 100ltr rear bin is designed to take a waste bag for collecting used product Front mounted castors for easy manoeuvring Manufactured from 100% polyethylene Page728 Dimensions SOL-741 SSB cm x 71cm x 96.5cm -6000Z Pads and rolls supplied separately Optional Drip Tray Fluid Dimensions W x D x H SOL-741 SGST ltr 60 x 40 x 15cm -5680M Clay Absorbent Granules Industrial general purpose granules made from a naturally occurring mineral, Attapulgite, which can be used for absorbing most fluids including water, oil and fuels Industry s most widely used granule type Non-toxic, chemically inert and fire retardant BS 476 Part 7, Class 1 rated Quick and easy to use Excellent absorbency performance - up to 12 litres per bag Granule Type Pack Absorbs Per Bag SOL-742 SCG025 Clay 20 ltr 12 ltr -8250A

30 Polyurethane Drain Covers EXTENDED RANGE Constructed from dual hardness laminated polyurethane with no fillers. High tack surface creates a tough, durable seal Low weight, easy to handle and can be used quickly for emergency spills Designed to be re-used - can be cleaned using soap and water and re-stored using the film cover Chemically resistant - can be used with a wide range of oils, fuels, solvents and other chemicals Environmentally safe Storage holdalls are also available separately, see below SPILL RESPONSE 742 Your first line of defence against environmental contamination. Re-usable polyurethane or single use clay covers which are extremely malleable for use on uneven surfaces. Single-Use Clay Drain Covers Made from chemically inert clay, that will not react to or with any chemical Extremely malleable for use on an uneven surface - will mould itself to the ground Hessian netting runs through the product to afford maximum strength - Supplied poly wrapped to enhance the storage life Can be carried on vehicles as part of an ADR kit For single-use only Pack of 2 Material Dimensions Colour SOL-741 SDC464P Polyurethane 46cm x 46cm Yellow -3026A SDC616P Polyurethane 61cm x 61cm Yellow -3030D SDCSB61 SDC616P complete with Storage Bag -3240K SDC919P Polyurethane 91cm x 91cm Yellow -3050F SDCSB91 SDC919P complete with Storage Bag -3248M Translucent Drain Covers Translucent polymer construction enables site managers and safety officers to quickly confirm that waste water systems are free of oils, chemicals and other spilt contaminants Re-usable - designed for multiple applications With lapped reinforced edges EXTENDED RANGE Material Dimensions Colour SOL-741 SDC614 Bentonite 65cm x 65cm Grey -3020C Drum Plug (Leak Block) Made from chemically inert bentonite clay that forms a barrier to aqueous liquids Provides temporary plugging of holes in drums or pipes Pre-mixed ready to use putty - No surface preparation is required Ideal for rapid response to unexpected releases of liquid High tack putty applies directly onto drum or tank to form a liquidtight seal For fuel and chemical leaks Non-toxic, non-flammable Material Dimensions Colour SOL-741 SDC616C Polyurethane 61cm x 61cm Clear -3039C TSDCSB61 SDC616C complete with Storage Bag -3755D Reinforced Polyurethane Drain Covers Lapped reinforced edges. Suitable for use in high traffic areas, can be driven over. Material Tub Colour SOL-741 Drum-Plug Bentonite 1 kg Grey -2880R Drain Cover Storage Bags For use with all polyurethane drain covers, can also be used to hold 1kg tubs of Drum Plug premixed clay putty Heavy duty vinyl construction Material Dimensions Colour SOL-741 SRDC61 Polyurethane 61cm x 61cm Clear -3450M SRDCSB61 SRDC61 complete with Storage Bag -3482K To Suit Drain Cover Holdall Dimensions SOL-741 SVH-70 46cm/61cm 15.5cm dia. x 70cm -6340M SVH cm 15.5cm dia. x 100cm -6340P Page 729

31 904 BATTERIES BATTERY SIZE CONVERSIONS Equivalent To Volts AAA MN2400/LR03/R03U 1.5 AA MN1500/LR6/HP7/R6U 1.5 C MN1400/LR14/HP11/R14U 1.5 D MN1300/LR20/HP2/R2OU 1.5 9V MN1604/6F22(U)/6LR61/PP PJ996/4R25(R) B1289/3R REMOTE MN9100/LR1 1.5 Lithium Coin Battery These lithium coin batteries are commonly used in car security (alarm/key fobs), organizer back-up batteries for PDA such as Psion etc., glucometers, cameras, electric thermometers, calculators, computer equipment (memory back-up battery), toys, accutron, communication equipment, watches, clocks, car radios, video camera data packs. They are the same size and replace the following batteries: DL2032, E-CR2032 and SB-T51. Battery Volt Pack Quantity EDI-904 CR2032 3V K Silver Oxide Button Battery These popular silver oxide batteries are commonly used in watches, calculators, toys and small electrical equipment. With exactly the same dimensions, they can replace: D303, D357, Gs13, 228, 357, , J, SB-B9, SR1154, SR44, SR44W, SR44H, 541,SP357, V357, 4276, KS76, 280-8, SR76E and 1131SO batteries. Alkaline Batteries A range of alkaline batteries that offer significantly longer life than zinc carbon batteries in high-drain appliances. Suitable for torches, radios, answerphones, toys, calculators, pagers, remote controls, smoke alarms and many other portable electrical appliances. AAA AA C ALKALINE Battery Volt Pack Quantity EDI-904 AA 1.5V K AAA 1.5V K C 1.5V K D 1.5V K 6LR61 9V K D 6LR61 PJ996 6V Lantern Battery The Edison PJ996 zinc chloride battery is ideal for lanterns, torches and most traffic management lighting, i.e. road construction and maintenance. Bulk Value Battery Multi Pack Contents 5 Packs AA & 2 Packs AAA EDI K LED Torch Battery Set LED torches with six super bright white LEDs. 100,000 hour LED life. Never needs a replacementbulb. Contents: One LED torch plus 4 packs of AA batteries Battery Volt Pack Quantity EDI-904 SR44 1.5V K Bulbs To suit Edison pocket mini torches and security flashlights. Description To Suit Pack Torch Qty EDI-913 Vacuum Bulb 2.4V/0.4A EDI K K dia. 5mm EDI K 1 Quartz Halogen Bulb 6.0V/55W EDI K K Page730 ZINC Battery Volt EDI-904 PJ996 6V -3500K Description To Suit Torch Pack Qty EDI-913 Xenon Bulb 2.4V/0.85 EDI / K 3.6V/0.85 EDI K K 4.8V/ K Spot Clear Bulb 12V/0.25 EDI K K Casing Length EDI-904 Aluminium K Black K Description To Suit Torch Pack Qty EDI-913 Krypton Bulb 2.4V/0.35A EDI K K 2.4V/0.4 EDI K K 2.4V/ /232/ K 3.6V/ / K 3.6V/0.75 Push in EDI K K 3.6V/0.75 Screw in EDI K K 4.8V/ K 6.0V/0.75 EDI K 1 6.0V/0.75 EDI K K 9.0V/0.75 EDI K K

32 LED Torches Six super bright white LEDs. 100,000 hour LED life. Battery life up to 50 hours (continuous). Precision machined high strength aluminium alloy case. Twist on/off. Corrosion-resistant anodised finish. Water and impact resistant. Complete with wrist strap. All joints sealed with O rings. Engineered and superbly balanced to give many years service. 904 TORCHES Combi Stretch Light TCS060 6 LED stretch torch that can be used as either a torch or a lantern. Push the housing together for a focused beam of light, or stretch the torch to illuminate a wider area. Ultra bright energy-saving LEDs give a typical battery life of approximately 24 hours. Comes complete with a cord wrist strap. Requires 4x AAA batteries (not included). Overall length: 115mm. Never needs a replacement bulb Model Casing Batteries Required Length EDI-904 TAL010S Aluminium 2x AA K TAL010B Black 2x AA K Aluminium Soft Grip LED Torches Water and impact resistant anodised aluminium case with rubber grip. Ultra bright long life LEDs with optical lens to produce a clear white light. Positive push button operation. All joints sealed with O rings. Pull the housing open to illuminate a wider area or push to close for a focused beam of light Model Batteries Required Length EDI-904 TAS03M 3x AAA K TAS03S 2x AA K TAS05L 2x C K TAS07L 2x D K Batteries Required EDI-904 TCS060 4x AAA -2700K Flexible Light Anodised aluminium handle and head, water-resistant and shockproof. Body can be twisted in any direction. Spare bulb included. Adjustable Beam Flexible Light Anodised aluminium handle and head, water resistant and shockproof. Flexible body can be twisted in any direction. Spot to flood adjustable. Spare bulb included. With a keyring clip. Description Batteries Required Length EDI-904 Adjustable Beam 2x AA K Page 731

33 904 TORCHES 24 LED Worklight LWL super bright LEDs. Magnetic base. Soft touch durable composite casing. 360 swivel hanging hook for hands free applications. 3 x AA batteries supplied. Lasts for 4-5 hours approx. IP20 moisture protection. Length: 208mm. ILR LED rechargeable lamp. Features: Oil/water resistant (IP68) heavy-duty rubber and polycarbonate case. Lasts up to 6 hours when fully charged. Adjustable brightness. Optional flashing mode. Foldaway swivel hanging hook. Powered by high capacity lithium-ion polymer batteries. Comes complete with bench/wall mountable charging base. Rechargeable Lamp Type KEN-503 3x AA Batteries 260g -5110K LED Rechargeable Worklight - 230V 37 super bright LEDs. Dual use as an inspection lamp or directional torch. Moisture protection IP44. Two magnets and two 360 swivel hanging hooks for hands free applications. Lower quarter of lamp rotates 180 to use as a stand. Supplied with AC/DC mains charger and 12V DC in-car charger for portable charging. 7.2V (800mAh) Lithium-Ion battery. Main light lasts up to 4 hours, and directional light lasts up to 20hrs, when fully charged. Rated to IP68 Length EDI mm -1100K LED Inspection Lamps Durable and robust construction with a rubber handle and end cup, plus a sturdy swivel hanging hook making it ideal for use in engine bays and other low light work areas. Anti-roll hexagonal shape with a convenient grip mounted ON/OFF switch. Main light and spot light option. Rechargeable Main light lasts up to 3.5hrs when fully charged using the charger supplied. Type KEN-503 Rechargeable -5080K LED Swivel Head Torch LSH070 Adjustable head torch with three lighting levels. Gives an ultra-bright white light provided by 7 LEDs. 5 stage tilting head. Adjustable top and side straps for total comfort and stability. Ideal torch for any low light activity. Batteries: 3x AAA (not supplied). Voltage KEN V 260g -5100K Page732 EDI-904 LSH K

34 Super Bright LED Rechargeable Spotlight ELRS001 Weatherproof. High and standard brightness mode. SOS distress signal. Emergency light/blinking light. Two position handle, to ensure comfortable and ergonomic access. Swivel stand. Battery level indicator. 6V 4Ah sealed lead acid battery. Supplied with AC/DC mains charger and 12V DC car plug adaptor. Battery operation times (18 hrs full charge): Standard brightness mode up to 8 hours. High brightness mode up to 3 hours. SOS distress mode up to 20 hours. Emergency light up to 25 hours. Emergency blinking light up to 50 hours. 904 TORCHES 2.5 Million Candle Power Rechargeable Lantern ERS million candle power super bright quartz halogen spotlight/lantern. Weatherproof. Two position handle, to ensure comfortable and ergonomic access. Swivel stand/handle. 6V 4Ah sealed lead acid battery. Supplied with AC/DC mains charger and 12V DC car plug adaptor for portable charging. Battery operation time (20 hours full charge): 20 minutes. 247 LUMENS EDI-904 ELRS kg -1060K Super Bright LED Rechargeable Spotlight ELRW super bright LEDs. Push up telescopic design. Three light modes: 30 LED worklight - directional six LED torch - dual operation. Anti-slip rubber housing. Incorporated magnetic base. Shock, water and oil resistant. Rechargeable Li-ion battery. LED indicator and overcharge protection. Supplied with mains charger and in-car charger. Operating times: 6 LED upto 25 hours, 30 LED up to 5 hours, 30+6 LED up to 4 hours. Candle Power EDI-904 ERS M -1050K LED Rechargeable Spotlight ELRS002 2 million candle power LED rechargeable spotlight. Super bright one watt LED light. Side LED tube light. Two position handle, to ensure comfortable and ergonomic access. Swivel handle. 6V 4Ah sealed lead acid battery. Supplied with AC/DC mains charger and 12V DC car plug adaptor for portable charging. Battery operation times (10 hours full charge): Main spot light up to 6 hours. Side LED tube light up to 70 hours. 80 LUMENS EDI-904 ELRW g -2730K Candle Power EDI-904 ELRS M -1070K Page 733

35 906 HAND BRUSHES Twisted Wire Tube Brushes Twisted wire handle for hand use. For industrial maintenance, agricultural, workshop, machinery etc. For decarbonising and heavy duty cleaning use of tubes, struts, awkward places etc. Wire Scratch Brushes A range of plastic handled scratch brushes with cast steel bristles. *With scraper. Dia. Brush Length Overall Length KEN-906 Steel mm 215mm -1030K mm 215mm -1050K mm 210mm -1060K mm 215mm -1100K 30 80mm 210mm -1120K Brass 6 75mm 300mm -1620K 10 75mm 300mm -1630K 12 75mm 300mm -1640K 16 75mm 300mm -1650K 19 75mm 300mm -1660K 25 75mm 300mm -1700K 7 Piece Set Contents: Tube brushes: 1x 10, 15, 20, 25 and 30mm diameter. Nylon slimline brushes: 1x curved and 1x straight. of Pieces KEN g -9010K Tubing Brush Plastic Handle For manual use in cleaning tubes and removing soft deposits in condenser and heat exchanger equipment. Dia. Brush Length Overall Length KEN mm 170mm -3020K 9 30mm 170mm -3030K 12 30mm 170mm -3040K 15 30mm 170mm -3050K 18 30mm 170mm -3060K 22 30mm 170mm -3070K 25 30mm 170mm -3080K 28 30mm 170mm -3090K 35 30mm 170mm -3100K French Chalk Square Sticks - 10 x 100mm For general layout marking in a wide variety of applications from marking tailor s seams and weld marking on sheet materials in fabrication industries. Flat Sticks - 5 x 12 x 125mm Flat sticks can be used with separate holder (CTL D). 6mm Plain Shank For use in power tools. Dia. Brush Length Overall Length KEN-906 Steel 15 60mm 100mm -1250K 20 60mm 103mm -1260K 25 60mm 120mm -1300K 30 60mm 115mm -1320K 35 60mm 110mm -1330K Brass 15 60mm 100mm -1450K 20 60mm 100mm -1460K 25 70mm 120mm -1500K 30 65mm 120mm -1520K 35 60mm 120mm -1530K 10 Piece Set Contents KEN of above 550g -9020K Slimline Brushes Plain metal handles, with steel wire or nylon bristle filling. Suitable for heavy duty cleaning and decarbonising. Straight Head Type Head Length KEN-906 Steel - Straight Head 50mm -1800K Nylon - Straight Head 50mm -1850K Steel - Curved Head 70mm -1900K Nylon - Curved Head 70mm -1950K Identity Discs - ed Suitable for all identification uses component/batch/ labelling, store/user tracking, key identification etc. 30mm outside diameter. Type Material KEN Aluminium -1130K (Pack of 100) Brass -2130K Identity Discs - Plain Suitable for all identification uses component/batch/labelling, store/user tracking, key identification etc. 30mm outside diameter. Brass Curved Head Aluminium of Rows COT K K K K 4* -6450K K Wire Scratch Brushes Designed for cleaning all rough surfaces on a variety of materials to remove paint, dirt, rust and stubborn deposits. Hardwood stocks. Bristle type: cast steel. For general-purpose work. of Rows KEN g -6200K 3 115g -6300K 4 130g -6400K 4* 155g -6450K Stainless Steel Stainless steel wire scratch brushes are used predominantly in stainless steel welding processes, where the use of an ordinary wire scratch brush would create the risk of contamination of the weld. Bristle type: stainless steel. of Rows KEN g -7200K 3 210g -7300K 4 220g -7400K * With scraper Brass These brass wire brushes are used in situations where there could be a potential fire or explosion hazard. Brass wire brushes will not cause a spark. Bristle type: brass. Shape Pack Quantity KEN-910 Square kg -0200K Flat kg -1000K Page734 Type Material KEN-937 Plain (Single) Aluminium -1030K Brass -2030K of Rows KEN g -8200K 3 220g -8300K 4 230g -8400K

36 PLATFORM STEPS/MECHANICAL LIFTING EQUIPMENT Aluminium Folding Platform Steps Made from strong lightweight aluminium with non-slip treads and platform. Available in 3 and 4 step versions and featuring safety rail. Manufactured to EN131 and able to handle a maximum load of 150kg. 3 Tread - overall height including safety rail: Opened: 1234mm. Platform height: 629mm. 4 Tread - overall height including safety rail: Opened: 1452mm. Platform height: 847mm. 939/941 Ratchet Cable Puller -1300kg Robustly constructed from galvanised steel with a powder coated body, hardened steel hooks with spring catches. It has a heavy duty swivel on the anchoring hook, 3.6m of 5mm aircraft cable giving a 1.5m pull and a sprung ratchet pawl. Suitable for pulling: trees, roots, fencing wires, vehicles, machines, boats, trailers, caravans etc. No. of Treads Platform Height MTL-939 MFP mm -5830K MFP mm -5840K Webbing Slings High strength to weight ratio, light to handle and easy to use. Shock absorbing construction and wide load bearing area produce a secure grip and eliminate damage to the load. All types are made from oil and acid resistant polyester, treated with a wear resistant impregnation. All sizes are colour coded to indicate SWL (safe working load), rating and marked with traceability code. These ratings are for a straight line pull only. Other variations of pull are shown below along with the relevant SWL. All slings come complete with test certificate. Supplied with Certificate of Conformity Safe Working Loads Straight Choker Basket Basket Basket Line 90 o * 120 o * 1,000kg 800kg 2,000kg 1,400kg 1,000kg 2,000kg 1,600kg 4,000kg 2,800kg 2,000kg 3,000kg 2,400kg 6,000kg 4,200kg 3,000kg 4,000kg 3,200kg 8,000kg 5,600kg 4,000kg 5,000kg 4,000kg 10,000kg 7,000kg 5,000kg Flat Slings With flat metal reinforced eye at end. Made to BS 3481:2. Working Width Length (M) SWL (kg) MTL-942 Simplex Type - Single Thickness 60 1, K , K 180 3, K 60 1, K , K 180 3, K 60 1, K , K 180 3, K Duplex Type - Double Thickness 30 1, K 60 2, K , K 120 4, K 150 5, K 30 1, K 60 2, K , K 120 4, K 150 5, K 30 1, K 60 2, K , K 120 4, K 150 5, K 30 1, K 60 2, K , K 120 4, K 150 5, K MTL kg -2020K Endless Round Slings Made to BS 6668 : Part 2. Working Width Length (M) SWL (kg) MTL , K 50 2, K , K 80 5, K 45 1, K 50 2, K , K 80 5, K 45 1, K 50 2, K , K 70 4, K 80 5, K 45 1, K 50 2, K , K 70 4, K 80 5, K 45 1, K 50 2, K , K 70 4, K 80 5, K 45 1, K 50 2, K , K 70 4, K 80 5, K Page 735

37 941 MECHANICAL LIFTING EQUIPMENT Hand Chain Hoists Quality made 2.5m and 3m chain hoists with a capacity ranging from 500 to 3000kg. Fitted with heat treated and ground, triple-spur geared shaft and pinion. Hooks fitted with robust safety latches and 360 degree rotation. All models include mechanical load brake for extra safety. EN A1:2009 and EC Council Directive 2006/42/EC Machinery compliant. Lever Hoists 750 to 3000kg range capacities. Fitted with heat treated and ground, triple-spur geared shaft and pinion. Hooks fitted with robust safety latches and rotate 360 degrees. Includes mechanical overload brake for extra safety. EN A1:2009 and EC Council Directive 2006/42/EC Machinery compliant. (1000kg) Standard Lift (M) Running Test Load (1000kg) No. Columns of Load Chains Load Chain Diameter MTL kg -6200K 1500kg -6220K 3000kg -6250K Beam Clamps 1000 to 5000kg range capacities. Clamp jaw designed to reduce flange stress by distributing load away from beam edge. Easily mounted with threaded handle. Fits a wide range of flange widths and beams. EN 13155: A2:2009 and EC Council Directive 2006/42/EC Machinery compliant. (1000kg) Standard Lift (M) Running Test Load (1000kg) No. Columns of Load Chains Load Chain Diameter MTL kg -4200K 1000kg -4210K 2000kg -4220K 3000kg -4230K 5000kg -4240K Page736 Lifting Flange Width MTL kg mm -1010K 2000kg mm -1020K 3000kg mm -1030K 5000kg mm -1050K

38 1,000kg Folding Mobile Crane 941 Ideal for home workshops or garages. Folding design for easy storage and transportation. Flow control valve for precise lowering and positioning. Overload safety valve. Hydraulic operation providing easy lifting. Heavy duty swivel hook with safety latch. four different jib options. Heavy duty castors. MECHANICAL LIFTING EQUIPMENT 1 TONNE Model number fmc ken k. Lifting capacity position (a) ,000kg. Lifting capacity position (b) kg. Lifting capacity position (c) kg. Lifting capacity position (d) kg. Maximum lifting height at minimum jib extension mm. Maximum lifting height at maximum jib extension..2004mm. Length of jib in position (a) mm. Length of jib in position (b) mm. Length of jib in position (c) mm. Length of jib in position (d) mm. Clearance height of legs mm. Length of frame mm. Overall clearance height mm. Maximum width of frame mm. Distance between rear wheel centres mm kg. 1 tonne (metric ton or t) = 1000kg 1 ton (imperial ton) = 2240lbs (1016kg) 730mm c d 1000mm 420mm 1555mm 1480mm 1551mm 1868mm 1913mm 1958mm 2004mm 640mm 390mm 640mm 497mm 1190mm Model Max. Hook Height KEN-941 FMC001 1,000kg kg -3670K Spares for above Description KEN-567 Seal Repair Kit 9g -8200K Replacement Ram -8800K Page 737

39 945 CASTORS Black Rubber Tyre Plastic Centre Suitable for use on most surfaces and for humid environments where medium harsh chemicals may be present. Quiet running with cushioned tyre. Not recommended for use where mineral or organic acids are present. Operating temperature range -20 C to +60 C. For dimensions see right. Swivel-Type with Top Plate Swivel-Type with Top Plate & Brake EXTENDED RANGE Fixed-Type with Top Plate Wheel Wheel Overall Plate Plate Hole Diameter Width* Height Centres x x x x x x x x x x 80 Except for Red Polyurethane Tyre type castors. See detail on next page. Swivel-Type with Bolt Hole Wheel Only Wheel Load Dia. Max(kg) ATL-945 ATL-945 ATL-945 ATL-945 ATL-945 ATL K -5125K -1170K -5135K K K -1180K -1220K -5230K K K -5320K -1230K -5330K K K -1240K -5500K -1814K K Black Rubber Tyre Steel Centre Wheel with Roller Bearing For smooth running with heavier loads. Suitable for use on most surfaces and for humid environments where medium harsh chemicals may be present. Quiet running with cushioned tyre. Not recommended for use where mineral or organic acids are present. Operating temperature range -20 C to +60 C. For dimensions see top-right. Swivel-Type with Top Plate Swivel-Type with Top Plate & Brake Fixed-Type with Top Plate Swivel-Type with Bolt Hole Swivel-Type with Bolt Hole & Brake Wheel Load Dia. Max(kg) ATL-945 ATL-945 ATL-945 ATL-945 ATL-945 ATL K -2545K -1020K -2535K -2555K -3210K K -2635K -2605K -1110K -1200K -3220K K -2735K -1120K -2720K -2740K -3230K K -1040K -1030K -2920K -2940K -3250K K -3035K -1130K -3020K -3040K -3260K Grey Rubber Tyre, Plastic Centre Wheel with Plain Bore Non-marking, quiet running cushioned rubber tyre. Suitable for use on hard floors (cement, tiles, etc) and for humid environments where medium harsh chemicals may be present. Not recommended for use with organic solvents, chlorinated substances, hydrocarbons or mineral oils. Operating temperature range -20 C to +60 C. For dimensions see top-right. EXTENDED RANGE EXTENDED RANGE Wheel Only Swivel-Type with Top Plate Swivel-Type with Top Plate & Brake Fixed-Type with Top Plate Swivel-Type with Bolt Hole Swivel-Type with Bolt Hole & Brake Wheel Only Wheel Load Dia. Max(kg) ATL-945 ATL-945 ATL-945 ATL-945 ATL-945 ATL-945 Zinc Plated K -5150K -1010K -1100K K K -5160K -2105K -2140K -2170K -2420K K -2245K -2205K -2220K -2250K -2430K Stainless Steel K K K K -2150K -2180K -2420K K -2260K -2430K Page738

40 CASTORS Nylon Wheel with Plain Bore Suitable for use on compacted floors (cement, tiles, etc.) Particularly recommended for the food processing industry. Not recommended for use where mineral or organic acids are present. Operating temperature range -10 C to +60 C. For dimensions see previous page. Swivel-Type with Top Plate Swivel-Type with Top Plate & Brake Fixed-Type with Top Plate EXTENDED RANGE Swivel-Type with Bolt Hole Swivel-Type with Bolt Hole & Brake 945 Wheel Only Wheel Load Dia. Max(kg) ATL-945 ATL-945 ATL-945 ATL-945 ATL-945 ATL-945 Zinc Plated K -3875K -7810K -5170K -3895K -4400K K -5180K -3910K -3955K -3995K -4410K K -4070K -4010K -4050K -1210K -4420K K -1140K -4210K -4250K -4290K -4440K Stainless Steel K K -3860K -3900K -4400K K -3980K -3920K -3960K -4000K -4410K K -4080K K -4100K -4420K K K K -4280K -4220K -4260K -5430K -4440K High Temperature Phenolic Resin Wheel with Plain Bore Suitable for use on hard floors (cement, tiles, etc.) and for humid environments where medium harsh chemicals may be present. Not recommended on uneven or rough surfaces. Operating temperature range -30 C to +300 C. For dimensions see previous page. Swivel-Type with Top Plate Red Polyurethane Tyre, Nylon Centre Wheel with Plain Bore Suitable for use on most surfaces and for humid environments where medium harsh chemicals may be present. Quiet running with cushioned tyre. Not recommended for use where mineral or organic acids are present. Wheel widths as below, for plate height and dimensions see previous page. Fixed-Type with Top Plate Swivel-Type with Bolt Hole Wheel Load Dia. Max(kg) ATL-945 ATL-945 ATL-945 ATL-945 ATL-945 ATL-945 Zinc Plated K K K K K -3650K K Stainless Steel K K -3560K K K K K EXTENDED RANGE EXTENDED RANGE Wheel Only Swivel-Type with Top Plate Swivel-Type with Top Plate & Brake Fixed-Type with Top Plate Swivel-Type with Bolt Hole Swivel-Type with Bolt Hole & Brake Wheel Only Wheel Wheel Dia. Width Wheel Load Dia. Max(kg) ATL-945 ATL-945 ATL-945 ATL-945 ATL-945 ATL-945 Zinc Plated K -4565K -4505K -4545K -1150K -5010K K -5190K -4605K -4645K -1090K -5020K K -8760K -4705K -1060K -4780K -5030K K -4965K -1070K -4940K K Stainless Steel K -7168K -4510K -4550K -4590K -5010K K -7170K -4610K -4650K -4690K -5020K K -4770K -4710K -4750K -4790K -5030K K -4970K K K Page 739

41 946 FLOOR MATTING Anti-Fatigue Matting Standing on a hard floor for prolonged periods without anti-fatigue matting can cause pain and discomfort in the lower legs, feet and back. Fatigue reduces concentration and therefore productivity. Anti-fatigue matting will increase comfort and productivity for workers who stand for long periods and substantially reduces stress, tiredness, aches and pains from standing on hard floors at work. Introducing anti fatigue matting into the workplace can provide staff with a more comfortable environment, which in turn encourages increased efficiency, concentration and productivity. Diamond Zone Manufactured from extremely hardwearing rubber capable of operating in high temperature environments. Diamond surface provides greater traction with extended wear and can be easily cleaned. Interlocking tile system enables the user to produce any required length. Also offers insulation against cold floors. Colour: black. Thickness: 12.5mm. Ortho Lite Cost effective anti fatigue matting. Offers the user relief from fatigue caused by standing. Insulates against cold concrete floors. Ideal for use in dry environments. Pebble surface provides additional traction. Colour: charcoal. Thickness: 6mm. Bubble Stand Anti Fatigue Mat Ideal for dry environments. Bubble surface stimulates constant foot movement to increase blood circulation. Ramped edges for additional safety. Colour: Black. Thickness: 14mm. Thickness SSF mm 700 x D Work Mat Hard-wearing SBR rubber construction. Raised circular surface for superior slip resistance - suitable for wet conditions. Features a moulded bevelled edge to reduce tripping. Conforms to Slip Resistance Test EN13552 Category R10. Colour: black. Thickness: 10mm. Thickness SSF x E 10mm 900 x F EXTENDED RANGE SSF x F 900 x H Ribbed Mat Durable mat, manufactured from hardwearing natural rubber. Fine ribbed surface has effective slip-resistance. Provides insulation from cold concrete floors. Can also be used on workbenches to prevent component damage. Colour: black. Thickness: 3mm. SSF x 0.9m -8520K 0.9 x 1.2m -8523K Premium Anti Fatigue Mat Heavy duty with Diamond Tread top surface. Comfortable foam backing. Manufactured with two yellow borders and ramped edges all round for additional safety. Colour: Black. Thickness: 12.5mm. Knee Saver Mat Manufactured from a closed cell PVC/nitrile blend. Reduces knee pain and lower back stress caused by regular kneeling, ideal for pain relief during floor fitting. Resistant to oils and chemicals. Colour: black. SSF x 360 x R Page740 Thickness SSF-946 3mm 900 x P SSF x 1.5m -8716K 0.9 x 3.0m -8719K

42 Anti-Slip/Spillage Matting Manufactured from 100% recycled factory waste. Hard wearing and versatile whilst providing excellent slip resistance. Its two layer tubular construction allows for fast drainage of any water or oils that may be in the workplace. Colour: black Barefoot Wet Room Matting Warm, comfortable, self draining safety matting for barefoot applications. The soft embossed surface combined with antibacterial and anti-fungal additives and excellent drainage, offers a safe solution for shower rooms, poolside and changing areas. 946 FLOOR MATTING Ultimate Anti Slip Matting The deep tread pattern of Vynagrip offers superior grip, and combined with a high liquid drainage, makes it the ultimate slip resistant matting solution. Vynagrip is resistant to most oils and chemicals making it suitable for the harshest environments. Oxford Blue Type Dimensions SSF m x 10m -7160K Roll 0.75m x 10m -7170K 1m x 10m -7180K Matt 0.5m x 0.9m 1m x 1.2m -7190K -7200K Entrance Mat Cost effective entrance mat offering good all round performance. Scrapes dirt and wipes moisture. Slip resistant PVC backing. Colour: Black. Thickness: 7mm. Colour Dimensions SSF m x 10m -7500K Ocean Blue 1m x 10m -7510K 1.2m x 10m -7520K 0.5m x 10m -7530K Oxford Blue 1m x 10m -7540K 1.2m x 10m -7550K 0.5m x 10m -7560K Charcoal Grey1m x 10m -7570K 1.2m x 10m -7580K Anti-Slip Matting Light, comfortable and economical matting. Insulates against cold floors, reduces standing fatigue and provides excellent slip resistance. (DIN R11) Floorline is suitable for areas where occasional spillage may occur. (metre) SSF x 0.9m -8706K 0.9 x 1.5m -8709K Colour Type Dimensions SSF-946 Red Roll 0.6m x 10m -7010K3.70 Roll 0.9m x 10m -7020K3.98 Blue Roll 0.6m x 10m -7050K2.70 Roll 0.9m x 10m -7060K3.98 Red Mat 0.6m x 0.9m -7030K Mat 0.9m x 1.2m -7040K Blue Mat 0.6m x 0.9m -7070K Mat 0.9m x 1.2m -7080K46.25 Colour Type Dimensions SSF-946 Roll 0.6m x 10m -7300K Red Roll 0.9m x 10m -7310K Roll 1.2m x 10m -7320K Roll 0.6m x 10m -7330K Blue Roll 0.9m x 10m -7340K Roll 1.2m x 10m -7350K29.52 Roll 0.6m x 10m -7360K Black Roll 0.9m x 10m -7370K Roll 1.2m x 10m -7380K Page 741

43 949 ARCHITECTURAL HARDWARE Door Controls This comprehensive range of Door Controls feature varying power sized units for many different door applications. They come with a choice of architectural covers which are available in 26 different plated or colour coated finishes. To help select the correct closer for you, unit has a listing showing their key features, certification numbers and fire ratings. Plated arms are available on certain units only, and test certificates are available upon request. BS EN1154 Classification This standard classifies door closers using a 6 digit coding system. Each digit relates to a particular feature of the product measured against the standards performance requirements. Digit (1) - Category of use: 3 denotes the unit is for closing doors from at least denotes the unit is for closing doors from 180 open. Digit (2) - Durability: 8 successfully completed 500,000 test cycles. Digit (3) - Test door mass/size: Seven grades are identified as shown in the table below (where a closer provides a range of power sizes both the minimum and maximum sizes shall be shown): Power size Test door mass Recommended door leaf width 1 20kg 750mm 2 40kg 850mm 3 60kg 950mm 4 80kg 1100mm 5 100kg 1250mm 6 120kg 1400mm 7 160kg 1600mm Budget Contract Door Closer 3 Mechanism Silver finish. CE tested. Closing force size 3 (EN1154). Maximum door width 950mm. Suitable for doors 40-60kg. Adjustable latch action. Fire tested to BS EN hour fire rated. Self handing (fits to left or right hinged doors). 180 opening (retains control of door when opened 180 ). Specification: CE Certifire approved: CF600. Meets EN1154: yes. Fire tested to EN1634: 1 1/ 2 hours. Power size: 2-4. Application: universal. Arm assembly: projecting arm. Architectural cover: mechanism only or 92 cover. Closing speed: adjustable. Latch action: adjustable. Stand open option: yes. (NOT for use on fire doors). Backcheck: no. Delayed action: no. Guarantee: 10 years. CF600 Overhead Door Closer 2-4 Mechanism Silver or plated finish. CE tested. Certifire approved CF600. Closing force size 3-4 (EN1154). Maximum door width mm. Suitable for doors 40-80kg. Fire tested to BS EN hour fire rated. Adjustable check action. Independent on/off latch action. Self handing (fits to left or right hinged doors). 180 opening (retains control of door when opened 180 ). Specification: CE Certifire approved: CF600. Meets EN1154: yes. Fire tested to EN1634: 2 hours. Power size: 3-4. Application: universal. Arm assembly: projecting arm. Architectural cover: 91. Check action: adjustable. Closing speed: adjustable. Stand open option: yes. (NOT for use on fire doors). Backcheck: yes. Delayed action: yes. Guarantee: 10 years. Digit (4) - Fire behaviour: 0 denotes the unit is NOT suitable for use on fire/smoke doors. 1 denotes the unit IS suitable for use on fire/smoke doors. Digit (5) - Safety in use: 1 all door closer units are required to satisfy the essential requirement of safety in use. Digit (6) - Corrosion-resistance: 0 - indicates no defined corrosion-resistance, 1 - indicates mild corrosion-resistance, 2 - indicates a moderate level of corrosion-resistance, 3 - indicates high corrosion-resistance, 4 - indicates very high corrosion-resistance. Within this section units have been tested to BS EN1154, with many units also having been tested to current Certified testing and CE test criteria. Therefore, the 6 digit classification is shown against of the varying units, thus indicating their performance and grading under BS EN1154. Concealed Chain Door Closer Brass finish. Concealed spring type closer. Spring tension closing force adjustable. Certified to BS 476 Pt. 22: / 2 hour fire rated. Left or right hand fitting. Suitable for use on doors up to 50kg. Chrome -4070K Brass -4080K Electro-Magnetic Fire Stay Silver or plated finish. Electro-magnetic holds open fire doors but releases in the event of fire. Closing force size 4 (EN1155). Maximum door width mm. Suitable for doors 60-80kg. Adjustable check action. Adjustable latch action. Hold open from CF K (1) (2) (3) (4) (5) (6) Description Mechanism only Silver -4030K Covered Unit Silver -4040K Page K (1) (2) (3) (4) (5) (6) Description Covered Unit Silver -4010K Covered Unit Plated -4020K K (1) (2) (3) (4) (5) (6) Description Covered Unit Silver -4050K Covered Unit Plated -4060K K

44 ARCHITECTURAL HARDWARE Panic Hardware This panic hardware range of emergency exit devices contains products that are certified to the European CEN standards BS EN179 & BS EN1125 and offers a design to give optimum safety and security. All products meet with the required standards in today s market. They have an anti-thrust mechanism to protect against attack, they carry a ten year manufacturer s guarantee and are two hour fire rated. Standard sized units are suitable for doors up to 2440mm high and 1220mm wide. Special sized vertical shoots, horizontal bars, keeps and pullman catch kits are available on request. BS EN1125 Classification This is the European standard for Panic Exit Devices. This determines that a Panic device must be fitted where members of the public are present and have no prior knowledge of the exit or hardware. BS EN179 Classification This is the European standard for Emergency Exit Devices. This determines that in emergency situations occupants will have prior knowledge of the exit and panic situation is unlikely to occur. Each standard is tested and evaluated and a 9 digit code is produced. BS EN 1125 & BS EN 179 are harmonised under the Construction s Directive and products must therefore carry the CE mark. Push Bar Panic Latch Suitable for public areas. Certified for use on fire doors. CE marked for safety. Tested to BS EN 179 and EN hour fire rated. Push Pad Panic Latch Suitable for offices, business premises etc. Certified for use on fire doors. CE marked for safety. Tested to BS EN 179 and EN hour fire rated. Outside Access Device Suitable for use on fire doors. Supplied with euro cylinder. Three keys included. 2 hour fire rated. 949 Silver -6010K Push Bar Single Panic Bolt Suitable for single and double flush fitting doors. Certified for use on fire doors. CE marked for safety. Tested to BS EN 179 and EN hour fire rated. Silver -6020K Push Pad Panic Bolt Suitable for offices, business premises etc. Certified for use on fire doors. CE marked for safety. Tested to BS EN 179 and EN hour fire rated. Silver -6040K Double Panic Bolt Set Suitable for rebated double doors. Certified for use on fire doors. CE marked for safety. Tested to BS EN 179 and EN hour fire rated. Silver -5990K Silver -6030K Silver -6000K Page 743

45 949 ARCHITECTURAL HARDWARE 5-Lever Mortice Detainer Sashlock Kitemarked to BS3621. Insurance approved sashlock, easily reversible latchbolt, five detainer mechanism, 64mm (2 1/ 2 ) and 76mm (3 ) case size available. Supplied with square forend and strike. Supplied with two keys. Satin chrome plate or polished brass finish. 3-Lever Mortice Sashlock Easily reversible latchbolt, adjustable springing feature, 64mm (2 1/ 2 ) and 76mm (3 ) case size available, supplied with square forend and strike. Supplied with two keys. Satin chrome plate or polished brass finish. Europrofile Cylinder & Turn 70mm (35/35). Polished brass or satin chrome plate finishes. Supplied with two keys and fixing screw. BS3621 Satin Chrome Plated 35mm/35mm -4430K Polished Brass 35mm/35mm -4440K Europrofile Double Cylinder 70mm (35/35). Polished brass or satin chrome plate finishes. Supplied with two keys and fixing screw. Satin Chrome Plated 64mm (2 1/ 2 ) -4090K 76mm (3 ) -4100K Polished Brass 64mm (2 1/ 2 ) -4110K 76mm (3 ) -4120K 3-Lever Mortice Deadlock 64mm (2 1/ 2 ) and 76mm (3 ) case size available. Supplied with radius forend and strike. Supplied with two keys. Satin chrome plate and polished brass finish. Satin Chrome Plated 64mm (2 1/ 2 ) -4210K 76mm (3 ) -4220K Polished Brass 64mm (2 1/ 2 ) -4230K 76mm (3 ) -4240K Euro Profile Mortice Sashlock Case Easily reversible latchbolt for internal and external door use. 64mm (2 1/ 2 ) and 76mm (3 ) case size available. Brass or nickel plated square forend and strike. Satin chrome plate or polished brass finish. Satin Chrome Plated 35mm/35mm -4410K Polished Brass 35mm/35mm -4420K Budget Lever on Pressed Backplate Aluminium finish. Latch Lock Oval Euro Satin Chrome Plated 64mm (2 1/ 2 ) -4250K 76mm (3 ) -4260K Polished Brass 64mm (2 1/ 2 ) -4270K 76mm (3 ) -4280K Page744 Satin Chrome Plated 64mm (2 1/ 2 ) -4170K 76mm (3 ) -4180K Polished Brass 64mm (2 1/ 2 ) -4190K 76mm (3 ) -4200K Type Latch -5940K Lock -5950K Euro -5960K Oval -5970K

46 For general purpose use and in domestic situations. Self colour. Supplied in pairs. Light Butt Hinges Stainless Steel 2 Ball Bearing Butt Hinge 523CE Polished or satin stainless steel finish. Grade 304 stainless steel. One hour fire tested. Stainless steel pin. Complete with screws. ARCHITECTURAL HARDWARE Digital Door Locks Digital door locks suitable for: offices, banks, warehouses, laboratories, schools, hospitals, flats, apartments or any restricted areas. Features: Resettable combination. Tamper-proof latch bolt. Weather resistant. Simple to fit. Internal and external applications x 15 x K x 18 x K x 22 x K x 25 x K x 28 x K x 40 x K Stainless Steel Satin 100 x 75 x K Stainless Steel Polished 100 x 75 x K Rising Butt Hinges Self closing hinges that also provide floor to ground clearance as they are opened. Available in a choice of left or right hand opening. Self colour. Supplied individually, boxed in 5s (pairs). Opening 75 x 45 x 15 Left Hand -8340K 75 x 45 x 15 Right Hand -8350K K Single Action Spring Hinges A very competitively priced hinge having all the features and operating abilities of more expensive products on the UK market. Supplied with screws, spare adjustment pins and cranking bar. Lacquered silver finish. Supplied in pairs. Polished Brass 2 Ball Bearing Butt Hinge 525CE Polished brass or brass plated finishes. One hour fire tested. Stainless steel pin. Complete with screws. 100 x 75 x K Polished Brass Butt Hinge 508 Double phosphor bronze washered finish. Brass pin. One year guarantee. 100 x 75 x K Aluminium Barrel Bolts Internal domestic locking bolt. Supplied with wood screws. Body Key Lock Override Satin Chrome No -5020K Satin Chrome Yes -5040K Hat & Coat Hooks ed in aluminium, stainless steel and brass. Stainless Steel Available with or without key override x 45 x K x 50 x K K 75 Aluminium -8150K K Aluminium -5880K Stainless Steel -5890K Brass -5900K Page 745

47 949 ARCHITECTURAL HARDWARE Oval Padlock Bolt A simple and efficient lockable gate securing bolt. Spring Loaded Bolts Spring loaded bolt suitable for metal or wooden gates. Shoot Dia. 10 ( 3/ 8 ) Zinc Plated -7670K 12 ( 1/ 2 ) Zinc Plated -7680K 15 ( 5/ 8 ) Zinc Plated -7690K Spring Loaded Animal Bolts Spring loaded bolt with staple on plate, suitable for gates, paddocks etc. Auto Gate Catches Plate Pin - Medium Duty For use on all types of gate. With cranked striker pin. Striker pin is plate type for fitting onto the surface of a post or fence. Packed complete with all fixing screws. Supplied individually, boxed in 5s. 100 Galvanised -7830K 100 Black -7835K Garage Door Drop Bolts A very strong product with numerous applications. Made from galvanised steel. Length 12 ( 1/ 2 ) Zinc Plated -7850K Tower Bolts General purpose bolts for shed doors etc K EXTENDED RANGE Length 76 (3 ) Black -7760K 101 (4 ) Galvanised -7770K 101 (4 ) Black -7780K 152 (6 ) Galvanised -7790K 152 (6 ) Black -7800K 203 (8 ) Black -7810K 254 (10 ) Black -7820K Auto Pig Lock Bolts Autolock bolts with bottom guard to prevent fouling of the latch. Length 203 (8 ) Zinc Plated -7840K K 32 BZP -7010K 50 Black -7020K 50 BZP -7025K 57 BZP -7030K Door/Gate Stop Door and gate stop. Supplied complete with screws and rubber stopper. Brenton Bolts Padlockable security bolt. 460 Black -7060K 600 BZP -7075K Medium Strap Hinges Supplied as pairs. Commonly used for lift-up lids and traps. Length x Shoot Dia. 101 x 12 (4 x 1/ 2 ) Galvanised -7710K 152 x 12 (6 x 1/ 2 ) Galvanised -7720K 203 x 12 (8 x 1/ 2 ) Galvanised -7730K 152 x 15 (6 x 5/ 8 ) Galvanised -7740K 203 x 15 (8 x 5/ 8 ) Galvanised -7750K Length 152 (6 ) Grey Japanned -7700K Length 203 (8 ) Self-colour -7640K 254 (10 ) Self-colour -7650K 305 (12 ) Self-colour -7660K Page746

48 Safety Hasps & Staples Secure fixings are concealed by hasp when in locked position. Length 75 (3 ) Black -6060K 115 (4 1/ 2 ) Black -6070K 150 (6 ) Black -6080K 75 (3 ) Zinc Plated -7918K 101 (4 ) Zinc Plated -7920K 152 (6 ) Zinc Plated -7930K Heavy Duty Vertical Hasp & Staples ARCHITECTURAL HARDWARE Security Hasps Manufactured from hardened steel with a duplex nickel plated anti- corrosive finish. The hinge pins, fixings and assembly are concealed with a folded edge for tamper protection. Supplied with fixing screws. Double Hinged: Models can be used for internal and external corner mounting. Triple Hinged: Models also allow for use on non-flush fitting (stepped) surfaces. 8120, 8110, 8100* & 8150*: For use on standard duty and domestic applications. 8200* & 8160*: For use on medium duty applications. *Supplied complete with door reinforcement plates for improved security K K -8100K Length 150 (6 ) Black -6120K 150 (6 ) Galvanised -6140K Short Pattern Heavy Hasp & Staple Length 150 (6 ) Black -6160K 150 (6 ) Galvanised -6180K Swivel Hasp & Staple -8160K -8200K -8150K Shackle Hinge To Suit Security Type Type Shackle Rating MTL Vertical Single 92 x 37 8mm K 8110 Vertical Single 120 x 45 8mm K 8100 Horizontal Single 125 x 45 11mm K 8150 Horizontal Double 160 x 45 11mm K 8200 Horizontal Triple 200 x 45 11mm K 8160 Vertical Triple 258 x 62 13mm K Gate Spring A general purpose return spring for assisting in the closure of gates. Supplied individually, boxed in 10s. Traditional Cast Cabin Hooks For restraining doors and gates. Often used in stabling. Supplied individually packed and complete with all fixing screws. Boxed in 5s. Length 200 (8 ) Black -6220K 250 (9 ) Black -6230K 200 (8 ) Galvanised -6250K 250 (9 ) Galvanised -6260K Heavy Duty Hasp & Staples Rotating and padlockable. 200 Black -7970K 250 Black -7980K Cast Iron Hot Bed Handles Supplied individually, boxed in 25s. Length 203 (8 ) Galvanised -7080K 203 (8 ) Black -7090K 254 (10 ) Black -7100K 150 Black -8030K Length Black -7905K -7915K 101 (4 ) Galvanised -7900K 152 (6 ) Galvanised -7910K Page 747

49 950 PADLOCKS Security Ratings All padlocks have a rating to indicate how secure they are, this is based on material, hardening, extra coating, shackle diameter, body width, and other security features such as anti-pick locks and 3, 4, 5 or 6 pin cylinders. S E C U R I T Y R AT I N G MIN MED MAX Rating Uses 1-2 Minimum security for indoor and outdoor use on tackle boxes, suitcases and drawers etc. 3-4 Minimum to medium security for indoor and outdoor use on garages, cabinets, toolboxes, gates, truck doors, lockers, sheds, bicycles etc. 5-6 Medium security for indoor and outdoor use on garages, cabinets, toolboxes, gates, truck doors, lockers, sheds, bicycles etc. 7-8 Medium to maximum security for indoor and outdoor use on store front and factory gates, large toolchests, construction site storage etc Maximum security for indoor and outdoor use on store front and factory gates, large tool chests and construction site storage etc. Brass Solid brass body with a hardened steel shackle and a double locking mechanism. For indoor and outdoor use on minimum to medium security items. 20mm: 3 pin cylinder. 30 and 40mm: 4 pin cylinder, 50 and 60mm: 5 pin cylinder. *Single locking only. HARDENED SHACKLE 2 to 4 SECURITY RATING DOUBLE LOCKING Brass Slimline Solid brass body with a hardened steel changeable shackle. For indoor and outdoor use on minimum to medium security items. EXTENDED RANGE 2 to 4 SECURITY RATING Lock Block With a solid brass body and molybdenum shackle. Designed to provide medium to maximum security for indoor and outdoor use on store front and factory gates, large toolchests, construction site storage etc. * keyed alike 8 SECURITY RATING Body Width Shackle Diameter x Clearance Rating (1-10) MTL mm 3.7 x 10.3mm 2* -6722K 30mm 4.8 x 15mm K 30mm 4.8 x 50mm K 40mm 4.8 x 22mm K 40mm 7.0 x 50mm K 50mm 7.0 x 26mm K 60mm 8.8 x 27mm K Key Blank to suit 20mm -9900K Key Blank to suit 30 & 40mm -9910K Brass - Stainless Steel Shackle Traditional style brass bodied padlock with a stainless steel shackle and a double locking mechanism. For indoor and outdoor use on many minimum to medium security items. 20mm: 3 pin cylinder, 30 2 to 4 SECURITY RATING DOUBLE LOCKING and 40mm: 4 pin cylinder, 50 and 60mm: 5 pin cylinder. * Single locking only Body Width Shackle Diameter x Clearance Rating (1-10) MTL mm 3.2 x 12mm K 25mm 4.8 x 15mm K 30mm 4.8 x 15mm K 30mm 5 x 43mm K 40mm 6 x 20mm K 50mm 7 x 25mm K Pack of 4 20mm 3.2 x 12mm K 25mm 4.8 x 15mm K 30mm 4.8 x 15mm K 30mm 5 x 43mm K 40mm 6 x 20mm K 50mm 7 x 25mm K Laminated Brass - Combination Type Laminated brass body with a brass shackle and a double locking mechanism. Available with four number tumbler (10,000 combinations) or three number tumbler (1,000 combinations). For indoor and outdoor use on minimum to medium security items. 3 to 4 SECURITY RATING DOUBLE LOCKING Body Width Shackle Dia. x Clearance Rating ( 1-10 ) MTL mm 8 x 13.5mm K 83mm 11 x 16mm K *83mm 11 x 16mm K Stainless Steel Disc Padlocks With stainless steel body and hardened steel shackle, these disc padlocks are designed to provide medium to maximum security for indoor and outdoor use on store front and factory gates, large toolchests, construction site storage etc. Available in keyed differently and keyed alike versions. Shackle Dia. x Clearance: 9.5 x 17.3mm. Type Body Width MTL-950 Keyed Differently Keyed Alike 70mm -8240K -8250K Laminated Brass Laminated brass body with a hardened steel shackle, a double locking mechanism and a pin cylinder. For indoor and outdoor use on minimum to medium security items. Key change every 1, SECURITY RATING 4 SECURITY RATING DOUBLE LOCKING Body Width Shackle Diameter x Clearance Rating (1-10) MTL mm 3.7 x 10.3mm 2* -7022K 30mm 4.8 x 15mm K 40mm 4.8 x 22mm K 50mm 7.0 x 26mm K 60mm 8.8 x 27mm K Key Blank to suit 20mm 5g -9900K Key Blank to suit 30 & 40mm 5g -9910K Page748 Body Width Shackle Dia. x Clearance Rating Combination (1-10) MTL mm 6 x 25mm K 46mm 8 x 25mm K HARDENED SHACKLE Body Width Shackle Diameter x Clearance Rating (1-10) MTL mm 6.3 x 20mm K 50mm 8.8 x 25mm K Key Blank -9950K

50 Brass - Cross Key Solid brass body with a hardened steel shackle and a double locking mechanism. Fitted with a dual lever 4 row 16 pin cylinder which has 1000 different key numbers. For indoor and outdoor use on minimum to medium security items. Key change every 100,000. PADLOCKS 4 Pin Strong Padlocks 4 pin padlocks available in a range of colours. Designed to provide minimum to medium security 950 for indoor and outdoor use on garages, cabinets, toolboxes, gates, truck doors, lockers, sheds and bicycles etc. Available in keyed differently and keyed alike versions. 6 SECURITY RATING 4 to 5 SECURITY RATING HARDENED SHACKLE DOUBLE LOCKING Body Width Shackle Diameter x Clearance Rating (1-10) MTL mm 6.8 x 25mm 4 255g -3844K 50mm 8.8 x 32mm 5 380g -3855K 60mm 11 x 35mm 5 540g -3865K Brass Anti-Pick Padlock Solid brass body with a hardened steel changeable shackle and a double locking mechanism. Fitted with a hardened steel cover plate and an anti-pick 6 pin brass cylinder. For indoor and outdoor use on minimum to medium security items. Key change every 20,000. HARDENED SHACKLE Body Width Shackle Diameter x Clearance Rating (1-10) MTL x x 25mm 4 310g -3054K 38 x x 75mm 4 335g -3094K 50 x x 25mm 6 420g -3206K 50 x x 50mm 6 445g -3226K 50 x x 75mm 6 475g -3236K Key Blank 5g -9930K HARDENED STEEL COVER PLATE Brass - Anti-Pick Weatherproof Solid brass body with a hardened stainless steel changeable shackle and a double locking mechanism. Fitted with a hardened steel cover plate and an antipick 6 pin brass cylinder. Completely weatherproof padlock which is suitable for use in the harshest corrosive conditions on minimum to medium security items. Key change every 20,000. DOUBLE LOCKING 4 to 6 SECURITY RATING ANTI- PICK 6-PIN CYLINDER 4 to 6 SECURITY RATING ANTI- PICK 6-PIN CYLINDER HARDENED STEEL COVER PLATE DOUBLE LOCKING Colour Body Shackle Dia. Width x Clearance MTL-950 Keyed Diff. Keyed Alike Black -7120K -7160K Blue 40mm 7 x 21.5mm -7125K -7165K Green -7130K -7170K Orange -7135K -7175K Red 40mm 7 x 21.5mm -7140K -7180K Yellow -7145K -7185K Weather-Resistant - Long Shackle Laminated steel body with hardened steel shackle, double locking mechanism and anti-pick cylinder. The PU coating makes this the most weather-resistant padlock. Ideally suitable for medium security for indoor and outdoor use in the harshest corrosive environments. For use on marine/brewery storage, haulage and warehouses etc. Available in a range of colours. All fitted with a weather-resistant key cover. Body Width Colour Shackle Dia x Clearance Rating ( 1-10 ) MTL mm Red 8.1 x 55mm K 54mm Yellow 10.7 x 46mm K Key Blank -9950K Laminated Steel Laminated steel body with a hardened steel shackle, a double locking mechanism and a 5 pin cylinder. For indoor and outdoor use on medium to maximum security items. Key change every 1,000 (30mm every 200). 5 to 6 SECURITY RATING HARDENED STEEL COVER PLATE WEATHERPROOF ANTI- PICK 6-PIN CYLINDER 4 to 8 SECURITY RATING DOUBLE LOCKING HARDENED SHACKLE WEATHERPROOF Body Width Shackle Diameter x Clearance Rating (1-10) MTL mm 6.3 x 25mm 4 310g -3554K 38mm 6.3 x 50mm 4 320g -3574K 45mm 8 x 25mm 5 370g -3655K 45mm 8 x 50mm 5 385g -3675K 50mm 9.5 x 25mm 6 415g -3756K 50mm 9.5 x 50mm 6 450g -3776K Key Blank 5g -9930K HARDENED SHACKLE Body Width Shackle Diameter x Clearance Rating (1-10) MTL mm 5.2 x 18.5mm 4 220g -5514K 40mm 6.3 x 25mm 5 265g -5525K 44mm 7.0 x 25mm 5 330g -5555K 50mm 8.8 x 25mm 7 500g -5587K 65mm 11 x 34mm 8 600g -5598K Page 749

51 950 PADLOCKS Solid Steel Heavy Duty Hardened solid steel, chrome and duplex nickel plated body with a hardened changeable steel shackle. Fitted with a double locking mechanism, hardened steel cover plate and an anti-pick six pin brass cylinder. For indoor and outdoor use on maximum security items. Key change every 20, SECURITY RATING ANTI- PICK 6-PIN CYLINDER HARDENED STEEL COVER PLATE Body Width Shackle Diameter x Clearance Rating (1-10) MTL x x 25mm 9 680g -1509K 63.5 x x 50mm 9 725g -1529K 63.5 x x 75mm 9 770g -1539K Aluminium - Anti-Pick Weatherproof Solid anodised lightweight aluminium body with a hardened stainless steel changeable shackle. Fitted with an anti-pick 6 pin brass cylinder and a double locking mechanism. Weatherproof padlock which is suitable for use in the harshest corrosive conditions on medium security items. Key change every 20, SECURITY RATING WEATHERPROOF ANTI- PICK 6-PIN CYLINDER DOUBLE LOCKING HARDENED SHACKLE Body Width Shackle Diameter x Clearance Rating (1-10) MTL mm 6.3 x 50mm 5 200g -5025K 50mm 9.5 x 25mm 5 255g -5205K 50mm 9.5 x 50mm 5 280g -5225K Laminated Steel - Combination Type Laminated steel, nickel plated body with a hardened steel shackle and a double locking mechanism. Available with four number tumbler (10,000 combinations) or three number tumbler (1,000 combinations). For indoor and outdoor use on minimum to medium security items. HARDENED SHACKLE Body Width Shackle Dia. x Clearance Rating Combination (1-10) MTL mm 6 x 25mm g -6004K 40mm 6 x 45mm g -6024K 46mm 8 x 25mm g -6064K Solid Brass Combination Padlocks Solid brass padlocks designed to provide minimum to medium security for indoor and outdoor use on garages, cabinets, toolboxes, gates, truck doors, lockers, sheds and bicycles etc. Available in a range of sizes. Solid brass body with hardened steel shackle and 3 or 4 digit combination. 4 SECURITY RATING DOUBLE LOCKING Solid Steel Anti-Pick Hardened solid steel, chrome and duplex nickel plated body with a hardened steel changeable shackle and a double locking mechanism. Fitted with a hardened steel cover plate and an anti-pick 6 pin brass cylinder. For indoor and outdoor use on medium to maximum security items. Key change every 20,000. HARDENED STEEL COVER PLATE 7 to 9 SECURITY RATING DOUBLE LOCKING Solid Steel - Anti-Pick, Anti-Cut Hardened solid steel, chrome and duplex nickel plated body with a molybdenum alloy anti-cut changeable steel shackle. Fitted with a double locking mechanism and an anti-pick six pin brass cylinder. For indoor and outdoor use on medium to maximum security items. Key change every 20,000. ANTI-CUT SHACKLE ANTI- PICK 6-PIN CYLINDER Body Width Shackle Diameter x Clearance Rating (1-10) MTL x x 25mm 7 400g -1107K 50 x x 50mm 7 430g -1127K 50 x x 75mm 7 460g -1137K 63.5 x x 25mm 9 710g -1209K 63.5 x x 75mm 9 800g -1239K 8 to 9 SECURITY RATING DOUBLE LOCKING ANTI- PICK 6-PIN CYLINDER Body Width Shackle Diameter x Clearance Rating (1-10) MTL x x 25mm 8 400g -2508K 50 x x 50mm 8 430g -2528K 50 x x 75mm 8 455g -2538K 63.5 x x 50mm 9 755g -2629K 63.5 x x 75mm 9 800g -2639K Solid Steel - Anti-Pick Shrouded Hardened solid steel, chrome and duplex nickel plated body with a hardened changeable steel shackle. Fitted with a double locking mechanism, hardened steel cover plate and an anti-pick six pin brass cylinder. For indoor and outdoor use on medium to maximum security items. Key change every 20,000. HARDENED STEEL COVER PLATE ANTI- PICK 6-PIN CYLINDER 7 to 9 SECURITY RATING DOUBLE LOCKING HARDENED SHACKLE 5 SECURITY RATING Body Width Shackle Dia. x Clearance No. of Dials Pack Quantity MTL mm 3.0 x 21.7mm K 20mm 3.0 x 21.7mm K 30mm 5.0 x 25.0mm K 30mm 5.0 x 25.0mm K 40mm 6.0 x 26.0mm K 40mm 6.0 x 26.0mm K Page750 Body Width Shackle Diameter x Clearance Rating (1-10) MTL mm 9.5 x 25mm 7 480g -2027K 63.5mm 11 x 25mm 9 830g -2039K

52 Weather-Resistant - Shrouded Shackle Laminated steel body with hardened steel shackle, double locking mechanism and anti-pick cylinder. The PU coating makes this the most weather-resistant padlock. Ideally suitable for medium security for indoor and outdoor use in the harshest corrosive environments. For use on marine/brewery storage, haulage and warehouses etc. Available in a range of colours. All fitted with a weather-resistant key cover. 950 PADLOCKS Safety Lockout Padlocks - Keyed Differently Compact high security padlocks. Individually keyed to differ 6-pin lock which will not release the key until the shackle is closed. Non-conductive and non-sparking. Resistant to chemicals and corrosion. 6-pin precision-machined cylinder for extra security. Colour coded for easy identification with a photo-luminescent label. Each padlock is supplied boxed with one key and keyring. Dimensions: Body width: 20 x 42mm. Shackle diameter x clearance: 6.5 x 38mm. 6 to 9 SECURITY RATING ANTI- PICK 6-PIN CYLINDER HARDENED STEEL COVER PLATE Body Width Colour Shackle Diameter x Clearance Rating (1-10) MTL-950 Covered Shackle 50mm Blue 8 x 33mm K 62mm Black 10 x 30mm K 75mm Yellow 11 x 34mm K Body Width Colour Shackle Diameter x Clearance Rating (1-10) MTL-950 Standard 45mm Red 8.1 x 18mm K 54mm Green 10.7 x 20mm K 69mm Black 9 x 30mm K WEATHERPROOF Weather-Resistant Laminated steel body with hardened steel shackle, double locking mechanism and anti-pick cylinder. The PU coating makes this the most weather-resistant padlock. Ideally suitable for medium security for indoor and outdoor use in the harshest corrosive environments. For use on marine/ brewery storage, haulage and warehouses etc. Available in a range of colours. All fitted with a weather-resistant key cover. 5 to 7 SECURITY RATING ANTI- PICK 6-PIN CYLINDER HARDENED STEEL COVER PLATE WEATHERPROOF Matlock Strong/Heavy Duty Padlocks Designed to provide medium to maximum security for indoor and outdoor use on store front and factory gates, large toolchests, construction site storage etc. This heavy duty padlock has a hardened steel body, black e-coating, molybdenum shackle and 4 digit combination. Colour MTL-950 LOK007 Red -7950K LOK008 Yellow -7960K LOK009 Green -7930K LOK010 Blue -7920K LOK011 Black -7910K LOK012 Orange -7940K Lockout Kit Electrical Lockout Kit Contains the most commonly required MCB lockouts, tags and labels required for routine checks, repairs or essential maintenance. Contents: 1x red safety padlock. 1x non-conductive hasp. 1x MCB lockout pin in. 1x MCB lockout pin out. 1x MCB lockout pin out wide. 2x universal MCB lockout. 1x ultra-fine permanent pen. 10x DO NOT OPERATE tags. Supplied complete in a belt bag. 18 PIECES 6 to 8 SECURITY RATING HARDENED SHACKLE Body Width Shackle Dia. x Clearance No. of Dials MTL mm 9.5 x 27mm K 62.0mm 11.0 x 51mm K Description Pieces SSF Lockout Kit -3240K Page 751

53 964 HAZARD TAPES Barrier Tape, Lane & Hazard Tape High quality self-adhesive diagonal stripe hazard tape. High grade PVC. Hazard Warning Tape Conventional usage: For low head room, obstructions to be avoided, changes in floor levels, mobile equipment and placing around warning notices. For locating fire equipment, placing around prohibition and indicating inflammable areas. For placing around fire escapes, safety equipment, first aid posters and equipment and breathing apparatus. BS Pipeline Marking & Identification Tape Suitable for use at filling points, drain valves, stops and flanging points. It is recommended that pipes be clearly labelled at points where contents of the pipes could be exposed. Polypropylene coated vinyl tape for durability. : 50mm x 33m. Anti-Slip Self Adhesive Floor Tape Provides extra traction on slippery surfaces such as hazardous floor areas, industrial machinery, playgroup apparatus, stair treads and various other potentially slippery areas. It is designed to provide a quick, effective and economical solution to the problem with a self-adhesive back for ease of installation. It can be used indoors or outdoors and is resistant to water, motor oil, detergents, solvents and UV light, providing a wide variety of anti-slip solutions. Colour Width x Length AVN-964 White 50mm x 33m -4020B Yellow 50mm x 33m -4010A Yellow/Black 50mm x 33m -4030C Red/White 50mm x 33m -4040D Green/White 50mm x 33m -4080H Green 50mm x 33m -4050E Blue 50mm x 33m -4060F Black 50mm x 33m -4070G Red 50mm x 33m -4090J Yellow/Black 75mm x 33m -4230C Barrier Tape - Non-Adhesive Non-adhesive hazard tape. Red and white or yellow and black diagonal stripe. (30 micron). With dispenser box. Width: 75mm. Length: 500m. Text Width AVN-964 Gas K Steam K Water K Electricity K Flow K Return K (Arrows) K Air K Oxygen K Acid K Hot K Fire K Magnetic Easy-Wipe Racking Strip A flexible magnetic strip which adheres to any steel surface. Easily cut to size with a gloss vinyl surface which can be written on. For use with drywipe pens and solvent cleaner for wiping. 10m white rolls. Black Pack Qty AVN K K Anti-slip Cleats Provides extra grip on smooth surfaces. Hard wearing, durable and easily installed. Pad size 610mm x 150mm. Supplied in black. General Purpose Ideal for stairways, ramps, ladders and machine footplates. Colour AVN-964 Red/White -3750K Yellow/Black -3760K Anti-Slip Floor Tape Self-Adhesive Floor Tape Provides extra traction on slippery surfaces such as hazardous floor areas, industrial machinery, playgroup apparatus, stair treads and various other potentially slippery areas. It can be used indoors or outdoors and is resistant to water, motor oil, detergents, solvents and UV light, providing a wide variety of anti-slip solutions. Roll length: 18m. Colour Width KEN-964 Black K Page752 Label W x L AVN mm x 10m -0130K 30mm x 10m -0140K 50mm x 10m -0150K Identification Tags with String Strong, high quality tags ideal for a wide range of uses. Made from 100% recycled board. Reinforced with washers for added strength. Available in buff, blue, green, red, white and yellow. Please note, colours are for guidance only. Colour Qty Dimensions AVN x K Buff x K x K x K Buff x K x K Blue x K Green x K Red x K White x K Yellow x K 610 x 150mm 610 x 150mm Pack Qty AVN K K Coarse Ideal for indoor and outdoor use. Pack Qty AVN K K

54 Jute Rope 6mm x 10m hank and 100m reel. No.4 type. 8 plait construction with core. 100% natural jute fibre. Resistant to heat and fire. Low stretch. Fully biodegradable. Store in a dry place. A general-purpose rope used by builders, DIY and gardeners. Polyester Rope 6mm x 100m reel. No.4 type. Eight plait construction. Centre core. 100% polyester. Easy to handle, knot and splice. High abrasion-resistance. Resistant to organic and mineral acids, oxidising agents and diluted alkalis. UV and weather resistant. Low stretch. A general-purpose high strength rope, suitable for repairing sash windows. ROPE, STRAPS & CHAINS 978 Cargo Strap Designed and moulded of custom high stretch' compounded rubber (50%) with reinforced ends and heavy duty hooks. Manufactured with the graduated teardrop design at end for added strength. Strong end hooks, zinc-plated for added rust protection. Dia x Length MTL-978 6mm x 10m 0185g -5510K 6mm x 100m 1850g -5520K Waxed Cotton Rope 6mm x 10m hank and 100m reel. No.4 type. 16 plait construction. Waxed for longer life. Polypropylene core for added strength. Weather-resistant. Low stretch. Smooth running. Used in the building trade and DIY for sash window repair, household refurbishment and outdoor use. Dia x Length MTL-978 6mm x 10m 240g -5710K 6mm x 100m 2.4kg -5720K Polished Cotton Rope 6mm x 10m hank. No.8 type. Solid 12 braid construction. Centre core. 100% pure cotton. Polished finish for longer life. High abrasion resistance. Moisture-resistant. Low stretch. Used in the building trade and in the home Applications include sash window repair, industrial and domestic pulley systems. Dia x Length MTL-978 6mm x 10m 285g -5910K Hi Vis Braided Cord 4mm x 100m reel. Solid 16 plait construction. Highly flexible with polypropylene for added strength and durability, weather-resistant and will float on water. Low stretch and smooth running. Dia x Length MTL-978 4mm x 100m 600g -6840K Dia x Length MTL-978 6mm x 100m 2.3kg -5620K Industrial Load Straps Load Strap Plain End Supplied as a single strap with ratchet unit attached to one end. Tension is applied by looping the strap around the cargo and threading back through the ratchet. Designed to safely secure cargo for transport. Code Length Min Break load MTL-978 LS11-0.3T 2.5m 0300kg -8020K LS05-0.8T 4.5m 0800kg -8040K LS05-1T 4.5m 1,000kg -8060K LS05-0.8T 6.0m 800kg -8080K LS05-1T 6.0m 01,000kg -8100K LS05-2T 7.5m 02,000kg -8120K LS05-2.5T 7.5m 2,500kg -8140K LS05-5T 8.0m 5,000kg -8180K Hook-Ended Two-Part Load Strap Supplied as two pieces. The first strap is hooked on one end and plain on the other. The second is a shorter strap with a hook on one end and ratchet on the other. Tension is applied by looping the strap around the cargo and threading back through the ratchet. Designed to safely secure cargo for transport. Code Length Min Break load MTL-978 LS02-1.5T 4.0m 01,500kg -8300K LS02-0.8T 4.5m 0800kg -8340K LS02-1T 4.5m 1,000kg -8360K LS02-1T 6.0m 1,000kg -8380K LS02-1.5T 6.0m 01,500kg -8400K LS02-3T 6.0m 03,000kg -8420K LS02-2T 7.5m 2,000kg -8440K LS02-2.5T 7.5m 2,500kg -8460K LS02-5T 8.0m 5,000kg -8500K LS02-4T 9.0m 04,000kg -8540K LS02-5T 9.0m 05,000kg -8560K LS02-4T 10.0m 4,000kg -8600K LS02-5T 10.0m 5,000kg -8620K Length x Width MTL x 40mm 134g -4200K Elastic Shock Cord Manufactured from hard-wearing and rot-proof elastic shock cord with a multi-stranded elastic core, the outer polythene cover is UV-resistant, weatherproof and heat cut and sealed to prevent fraying, for increased durability. Ideal for securing awkward items and countless other applications K -6580K MTL-978 6mm x 8m -6560K 8mm x 8m -6580K Tarpaulin Cord Ball Ties Manufactured from hard-wearing and rot- proof 5mm elastic shock cord with a multi-stranded elastic core, the outer polythene cover is UV-resistant and weatherproof for increased durability. PACK OF 10 MTL mm (6 ) -9160K 250mm (10 ) -9200K Page 753

55 978 ROPE & CHAIN FITTINGS Welded Straight Link Chain Often used for common everyday uses such as trailer ties and door stays as well as the handling of materials in industry. The chain has the weld placed at the side of link of chain. A popular and versatile product. Welded chain is light and strong, ideal for general-purpose applications such as park swings, garden use, security etc. Manufactured from mild steel. Supplied in 10m length packs in boxes. c b Link Sizing a EXTENDED RANGE Japanned From the ancient Japanese method of stove enamelling. Results in an attractive shiny black surface. Ideal for outdoor use. Link a x b x c Recommended Loading (kg)* Length per Box (kg) MTL x 21 x m K 4 x 26 x m K 5 x 28 x m K 6 x 33 x m K 8 x 40 x m K Quick Repair Links A connection for joining lengths of chain or rope. Available in two finishes. EXTENDED RANGE Link Dia. Pack Qty MTL ( 3/ 32 ) K 4 ( 5/ 32 ) K 5 ( 3/ 16 ) Zinc K 6 ( 1/ 4 ) K 8 ( 5/ 16 ) K 4 ( 5/ 32 ) K 5 ( 3/ 16 ) Stainless K 6 ( 1/ 4 ) Steel K 8 ( 5/ 16 ) K Heavy Duty Security Chain Black Nylon Hardened square links with nylon sheath for protection. For domestic and industrial applications. Galvanised Gives a high standard of corrosion resistance in all exterior environments. The thickness of the zinc coating may be variable due to the process of dipping in molten zinc. Recommended for exterior use. Link Recommended Length a x b x c Loading (kg)* per Box (kg) MTL x 21 x m K 4 x 26 x m K 5 x 28 x m K 6 x 33 x m K 8 x 40 x m K Bright Zinc-Plated (BZP) Zinc-plating involves the electrolytic application of zinc by immersing clean steel parts in a zinc salt solution and applying an electric current. This process applies a layer of pure zinc. Ideal for exterior use. Link Recommended Length a x b x c Loading (kg)* per Box (kg) MTL x 21 x m K 4 x 26 x m K 5 x 28 x m K 6 x 33 x m K 8 x 40 x m K Solid Brass Oval A general purpose chain, decorative and rust resistant. Mending Links With scarf opening at one end for maximum strength. Ideal for joining or repairing chains. Galvanised finish. Length Pack Qty MTL (1 1/ 4 ) K 6 38 (1 1/ 2 ) K 7 51 (2 ) K 8 51 (2 ) K Page754 Link a x b x c Length per Box (kg) MTL x 13 Chrome 10m K 1.8 x 13 Polished 10m K 2.3 x 16 Chrome 10m K 2.3 x 16 Polished 10m K Stainless Steel Long Link Stainless steel marine grade for additional corrosion resistance. Link a x b x c Recommended Loading (kg)* Length per Box (kg) MTL x 26 x m K 4 x 32 x m K 5 x 35 x m K 6 x 42 x m K 8 x 52 x m K * Chains are NOT tested. Load figures are guidance only. Cleat Hooks Cast iron hooks generally for use with pulleys. Length MTL (3 ) Electro-Galv -4620K 100 (4 ) Electro-Galv -4630K 150 (6 ) BZP -4640K Chain Link Sheath Length Dia. Material MTL mm -3100K 1500mm 10mm Nylon -3110K Strong Link Security Chain Bright Zinc Plated (BZP) Hardened links with a polypropylene moulded sheath for added protection. For domestic and industrial applications. Chain Length Link Dia. MTL mm -3200K 1200mm 8mm BZP -3210K 1500mm -3220K Spiked Steel Chain Galvanised Ornamental welded steel chain with spike every alternate link. Hot dip galvanised for maximum corrosion resistance. Link MTL x 8mm Galvanised -3020K S-Hooks General-purpose hook ideal for hanging baskets etc. Galvanised finish. Length Pack Dia. of Qty Material MTL (1 ) mm -3700K 38 (1 1/ 2 ) mm -3710K 51 (2 ) mm -3720K 63 (2 1/ 2 ) 5 6.3mm -3730K 76 (3 ) 5 8.0mm -3740K 100 (4 ) mm -3750K

56 Swivel Harness Snap Hook A general-purpose hook ideal for keys, leashes and holdalls. Length x Eye MTL x 20 (3 x 3/ 4 ) Nickel-Plated -4540K Swivel Spring Billet Hook Animal leash clips for chains, with swivel to prevent knotting and twisting. Length MTL (2 1/ 4 ) Nickel-Plated -4510K Ring On Plate For tethering animals, mooring small boats, and securing equipment. Ring x Plate MTL x 50 (2 x 2 ) Galvanised -4740K Staple On Plate A comprehensive range of accessories to suit flexible connectors, ropes and chains. For permanently fixing chain or rope to a wall, fence or post. Staple x Plate MTL x 50 (2 x 2 ) Galvanised -4720K Hook On Plate End fitment for mounting on to fence posts or walls. Hook x Plate MTL x 50 (2 x 2 ) Galvanised -4700K Bow Shackles A coupling link with a bow shape to allow extra clearance for more than one length of chain or rope. Material and pin diameters are equal except where stated. Rated loads are for guidance only. Tested bow shackles are available to order. Material x Pin Dia. MTL ( 1/ 4 ) Galvanised -4420K 10 ( 3/ 8 ) Galvanised -4440K 13 ( 1/ 2 ) Galvanised -4450K Swivel Spring Hooks Connectors for ropes and chains, with swivel to allow revolving and prevent knotting and twisting. Zinc plated finish. Length Pack Qty MTL (2 ) K 63 (2 1/ 2 ) K 75 (3 ) K 90 (3 1/ 2 ) K 100 (4 ) K Commercial Thimbles A metal loop that forms a rope eyelet to prevent wear and tear. Galvanised finish. Length x Rope Dia. Pack Qty MTL x 3 (1 x 1/ 8 ) K 28 x 4 (1 1/ 8 x 5/ 32 ) K 32 x 5 (1 1/ 4 x 3/ 16 ) K 38 x 6 (1 1/ 2 x 1/ 4 ) K Spring Hooks A permanent end connector for chain and rope. Length MTL (2 ) Zinc-Plated -3600K 63 (2 1/ 2 ) Zinc-Plated -3610K 75 (3 ) Zinc-Plated -3620K 90 (3 1/ 2 ) Zinc-Plated -3630K 100 (4 ) Zinc-Plated -3640K Pulleys Ideal for flagpoles, washing lines, and rolling back awning canopies. With cast wheels for ropes up to 8mm dia. Line pulleys are supplied fitted with S type hooks. Galvanised pulleys have cast wheels for rope up to 8mm dia. Black (epoxy) pulleys have nylon wheels for rope up to 8mm dia. All types below are with single wheel. ROPE & CHAIN FITTINGS Wire Rope Grips To grip the return ends of wire rope when in a loop. For rope grips shackles supplied with certificates of conformity please. Wire Rope Dia. Pack Qty MTL ( 1/ 8 ) Galvanised K 5 ( 3/ 16 ) Galvanised K 6 ( 1/ 4 ) Galvanised K 8 ( 5/ 16 ) Galvanised K 10 ( 3/ 8 ) Galvanised K 13 ( 1/ 2 ) Galvanised K Dee Shackles A coupling link for chain and rope with a D shape to prevent excess movement. Material and pin diameters are equal except where stated. Rated loads are for guidance only - tested dee shackles are available to order. Material x Pin Dia. Pack Qty MTL ( 3/ 16 ) Galvanised K 6 ( 1/ 4 ) Galvanised K 8 ( 5/ 16 ) Galvanised K 10 ( 7/ 16 ) Galvanised K 12 ( 1/ 2 ) Galvanised K 16 ( 5/ 8 ) Galvanised K 4 ( 5/ 32 ) St. Steel K 5 ( 3/ 16 ) St. Steel K 6 ( 1/ 4 ) St. Steel K 8 ( 5/ 16 ) St. Steel K Carbine Hooks Quick release hook for connecting to chain or rope. EXTENDED RANGE EXTENDED RANGE Dia. x Length Pack Qty MTL x 50 (2 ) Galvanised K 6 x 60 (2 3/ 8 ) Galvanised K 7 x 70 (2 3/ 4 ) Galvanised K 8 x 80 (3 5/ 32 ) Galvanised K 10 x 100 (4 ) Galvanised K 4 x 40 (1 19/ 32 ) St. Steel K 5 x 50 (2 ) St. Steel K 6 x 60 (2 3/ 8 ) St. Steel K 8 x 80 (3 5/ 32 ) St. Steel K 978 Pulley Type Sheath Dia. MTL-978 Awning 38 (1 1/ 2 ) Galvanised -3910K Awning 38 (1 1/ 2 ) Black -3900K Line 38 (1 1/ 2 ) Galvanised -3920K Upright 38 (1 1/ 2 ) Black -3930K Screw 44 (1 3/ 4 ) Black -3940K Sash 44 (1 3/ 4 ) Zinc Plated -3950K Awning Line Upright Screw Sash Page 755

57 984 TARPAULINS Matlock Tarpaulins For industry, construction, agriculture, marine, domestic and recreation. Washable, shrinkproof, rotproof, tearresistant and UV stabilised to prevent fading. Ideal ground cover for camping, hunting or fishing. Double-laminated polyethylene weave with rope lined hems which are heatsealed with aluminium eyelets at one metre intervals. Available in green or reversible blue/green. Standard Duty: 120g with standard corners. Heavy Duty: 160g with reinforced corners. Group 978 Standard Corners Heat Sealed Page756 Top Lamination Polyethylene Weave Bottom Lamination Rope Lined Reinforced Corners MTL-984 (m) Blue/Green Standard-Duty 120g 2.7 x K 3.6 x K 4.5 x K 5.4 x K 7.0 x K Reversible MTL-984 (m) Green Standard Duty 120g 1.2 x K 1.8 x K 1.8 x K 2.5 x K 3.6 x K 3.6 x K 4.0 x K 5.0 x K 5.4 x K 7.0 x K 7.0 x K 9.0 x K 10.0 x K Heavy Duty 160g 1.2 x K 1.6 x K 2.5 x K 3.6 x K 3.6 x K 4.0 x K 5.0 x K 5.4 x K 7.0 x K 10.0 x K

58 Heavy Duty P' Handle Sack Truck P' style handle for easy handling of heavy objects. Handle design keeps truck horizontal when laid flat. All tubular steel construction. Large 250mm pneumatic wheels for stable transport over uneven or stepped surfaces. Self-assembly wheels. : 200kg. 985 HANDLING Stair Climbing Sack Truck Tubular steel with double framed sides for increased rigidity. Looped handles provide knuckle protection and positive grip in various positions. Fitted with 400mm long footiron, three star wheeling with 125mm diameter polypropylene tyred wheels for regular contact with stairs and curbs. Height x width: 1070 x 610mm. : 200kg. 200kg MTL kg 8.8kg -1610K Heavy Duty Sack Trucks High quality tubular steel frame with solid rubber tyres and hand grips on the handles. Self-assembly wheels. : 100 and 200kg. 100kg 200kg 200kg MTL kg -2020K Stair Climbing Sack Truck Tubular steel with double-framed sides for increased rigidity. Looped handles provide knuckle protection and positive grip in various positions. Curved crossbar - suitable for carrying cylindrical items. Fitted with 255mm long foot iron which has upturned back edge. Three star wheeling with 150mm diameter rubber tyred wheels for regular contact with stairs and curbs. Height x width: 1275 x 620mm. : 200kg. 200kg Colour CTL kg Blue 10.3kg -2000D 200kg Red 11.7kg -2010E MTL kg 16.5kg -2000K Page 757

59 985 HANDLING Folding Platform Truck Lightweight aluminium. Ideal for delivery vans. 2x fixed and 2x mm diameter solid rubber castors mm telescopic handle. Folds flat for easy storage. Base size: 500 x 415mm. : 150kg. Three Position Platform/Sack Truck Large 200mm solid rubber sack truck wheels. Two 360 platform truck castors for easy manoeuvrability. Removable handle for easy storage. Flat packed for user assembly. : 80kg. 150kg 80kg FOLDS FLAT MTL kg 8.00kg -3360K Folding Trolleys Non-slip PVC load surface. Tubular steel handle folds flat for minimal storage space requirements. 2x fixed and 2x swivel castors for easy movement. PVC buffer strip on the platform edge to protect doors and furniture. Ideal for office environments. Platform size: 616 x 916mm. Capacities: 150 and 300kg. FOLDS FLAT Heavy Duty 3-in-1 Truck Versatile hand truck which converts to a platform truck or 45 barrow. Fitted with two 200mm diameter solid rubber, roller bearing tyred wheels and two 125mm diameter rubber tyred swivel castors. Height: horizontal 460mm, vertical 1250mm. Width: 470mm. Platform length: 1100mm. : 350kg. MTL kg 8.6kg -2090K Service Trolley 3 Shelf Trolley Super strong polyethylene moulded. Constructed from a non-conductive material which is unaffected by battery acid, solvents and cleaning solutions. Overall dimensions (L x W x H): 610 x 458 x 840mm. 150kg & 300kg 350kg MTL kg 08.5kg -2030K 300kg 15.2kg -2060K Page758 MTL kg 22.3kg -0998K MTL kg -3220K

60 Access Platform Non-integrated working platform fitted with foldaway rear guard. Meets the requirements of HSE Guidance Note PM28 (3rd Edition December 2005). An economical and safe way to carry out non-routine maintenance tasks. Lifts 200kg or one man with tools. Comes with rated fixed safety harness anchor point within the safety cage. Fits most forklift trucks, is manufactured from steel and finished in safety yellow. Specifications: 800 x 800mm carry basket. Fitted with foldaway rear guard. Locking fork restraint. Lift up front gate bar. Fixed anchor point. Fork size: 170 x 70mm. HANDLING 985 Description Carry Basket MTL-985 Access Platform 800 x kg -1430A Pallet Trucks Fully sealed hydraulic system with pressure relief and overload valves. Three positon trigger: lift-neutral-lower. Bushed in key areas with grease points and entry/exit rollers. National standards: ISO3691-5:2014 and ISO3691-7:2011. Specification; : 2500kg. Fork length: 1150mm. Overall fork width: 550/685mm. Fork dimension: 160 x 50mm. Raised height: 200mm. Lowered height: 85mm. Steer wheels: nylon 200 x 50mm. Load rollers: tandem - 80 x 70mm. Garden Wheelbarrow Standard - suitable for all garden and domestic use. Three piece tubular steel frame. 0.7mm pressed steel pan with rolled safety edges. Plastic handles for user comfort. Green stove enamelled, corrosion-resistant easy clean finish. Pneumatic tyred disc wheel. : 85ltr (3cu.ft.). Group kg Fork MTL kg 1150 x K 2500kg 1150 x K Tyre Type RTL-985 Pneumatic 13kg -2600K Page 759

61 986/992 INSULATION TAPE/TRAFFIC MANAGEMENT PVC Insulation Tape Extremely flexible with a good adhesion. For wire and cable insulation, bundling and reinforcing. Assorted colours for colour-coding cables. Flame retardant. Manufactured to BS 4J10 (Aero) and BS Roll length: 33m. Box quantities: 19mm = 40, 25mm = 30 Thickness: 0.13mm (5mil). Adhesion: 0.47kg/25mm, (16.5oz/1 ). Tensile strength: 5.2kg/25mm (11.5lb/1 ). Elongation: 150%. Breakdown voltage: 5.5kV. Insulation class: 80 C. Group 558 Roll Width Colour Box Quantity AVN-986 Grey K Purple K Orange K Brown K Black K 19mm Blue K Green K Red K White K Yellow K Green/Yellow K Black K Blue K 25mm Green K Red K White K Yellow K Post & Chain Barriers The Matlock support post and chain demarcation barrier system is lightweight and sturdy. It is ideal to cordon off an area or to form a channel for queuing. Suitable for warehouses, factories, offices, leisure venues etc. Support posts, bases and chain packs sold separately. Chain support post with cap. Height: 910mm. Diameter: 50mm. Extra Wide PVC Insulation Tape Extremely flexible with a good adhesion. For wire and cable insulation, bundling and reinforcing. Flame retardant. Manufactured to BS 4J10 (Aero) and BS Roll length: 33m. Roll Width Colour AVN mm Black -8500K 100mm Black -8700K Chains Supplied in 25m lengths Colour Chain Diameter MTL-992 Red/White 6mm -2500K Black/Yellow 6mm -2510K Red/White 8mm -2520K Black/Yellow 8mm -2530K Red/White 10mm -2540K Black/Yellow 10mm -2550K Chain Support Post Bases Page760 Colour MTL-992 White/Red 380g -2840D Yellow/Black 380g -2860F Type MTL-992 Standard 1.9kg -2720B Heavy Duty 3.3kg -2740D

62 TRAFFIC MANAGEMENT 992 TM Effective solution that guarantees satisfactory BARRIER CONTROL in any environment Traditional systems for controlling people traffic using standard barriers connected via a chain or belt going pole to pole are associated with the continuous problems of maintaining a safe place to work. Even expanding barriers or self-retractable barriers could break, fall down or blow away exposing people to unnecessary and unacceptable risk. The cumbersome nature of the sturdier systems also limits their usability, making them less flexible and impairs their portability. These problems are magnified in areas that have to cope with work space restrictions and hazardous working conditions such as those found in the offshore gas and oil industry. Barriers are a key requirement of the Health and Safety (Safety Signs and Signals) Regulations. The Z-Barrier system is the most innovative improvement in temporary safety barriers and provides an effective solution that guarantees satisfactory barrier control in any work environment. Z-Barriers are patent pending for the unique design that ensures barriers are prominent and remain in position, for all physical and environmental conditions. Manufactured from a unique, reinforced PVC-based double-sided warning tape, with a high visibility day glow pattern on one face and a night reflective pattern on the other face. These are the most visible barriers available on the market today. Quick and easy to put up, they are easily fastened to any anchor point or other, providing a flexible barrier across any opening, around objects or in multiple directions. Elastic properties allow Z- Barriers to expand and fit between points instead of being cut to length. They are inherently shock absorbing and resist any degree of wind load to prevent damage The Immediate Barrier Solution 4 Individual Z-Barriers EXTENDED RANGE Z Barrier High Visibility Heavy Duty Bag With two shoulder straps, a carry handle and a drawstring at the top. A4 Sign Pockets Internal Dimensions: 300 x 210mm. Multiple hanging holes allow for portrait or landscape use. Supplied with two fixing ties. Expansion Range MTL-992 White/Red 1 1-2m -5010K 2 2-4m -5020K 3 3-6m -5030K Yellow/Black 1 1-2m -9301K 2 2-4m -9302K 3 3-6m -9303K Yellow/Black Z-Barrier Starter Pack Contents: 10x size 1, 5x size 2 and size 3 and 2x sign pockets. Other signs available on request, specials can be made to order. A4 Sign Pockets (shown above) The flexible and robust sign pockets were designed to allow users to quickly and effectively create their own signage. All you need is a pen and paper. However we do supply a range of standard signs that will fit the pockets. The most popular designs are shown here. Colour MTL-992 White/Red -9010K Yellow/Black -9322K Description MTL-992 Heavy Duty Bag -3500K Description MTL-992 A4 Sign Pockets -7010K Page 761

63 994/996 Fire Blankets Fire blanket supplied in a quick release dispenser which can be attached to a wall near possible fire hazards. The blanket is manufactured from neoprene coated glass cloth. Conforms to BS light duty. B.A.F.E. approved, Kitemarked to BS EN1 869: 1997 and independently tested by the Loss Prevention Council. Guaranteed for five years. Unique patented 3-ply blanket material will effectively extinguish cooking oil fires. FIRE SAFETY/FIRST AID Eye Wash Station Cabinet Wall mounted eye wash station cabinet complete with 2x 500ml eye wash solution and 2x No.16 sterile eye pads. : 2.0kg. Group 421 Blanket TFF x 1.2m -3000K 1.8 x 1.2m -3020K 1.8 x 1.8m -3040K Description TFF-996 Eye Wash Cabinet -1950K Replacement 500ml Eye Wash Solution -1980K Alcohol-free Cleansing Wipes The alcohol-free solution cleanses and soothes cuts and grazes and prepares surrounding area for dressing, ensuring greater adhesion. Individual sachets. Assorted Plasters All the Tuffsafe range of plasters are latex free, ventilated and sterile. Five different sizes (assorted) per box. Individually wrapped. x 4 PACK OF 100 Pack Quantity TFF K Unmedicated Dressings High quality absorbent dressings. Medium and large dressings are sterile. Eye pad and triangular bandage are non-sterile. x 4 x 40 x 32 x 20 Type Pack TFF-996 Blue - Detectable 100 assorted 125g -2490K Stretch Fabric 100 assorted 130g -2510K Waterproof 100 assorted 120g -2530K Fabric Extension 50 (170 x 20mm) 110g -2560K Safety Pins In assorted sizes. Pack of 60. Description Pk Qty TFF-996 Dressings 120x120mm 180x180mm K -2680K Eye Pad K Triangular Bandage 90x127cm K Page762 PACK OF 60 s TFF , 0, K 0, 1, K

64 Small Catering First Aid Kit Supplied in attractive durable polypropylene blue plastic box with internal compartments for ease of access to the required dressing or treatment. Secure lids to help protect contents against dust and moisture. Wall mountable - optional hanging bracket enabling the kits to be positioned at fixed first aid points but also easily released from the wall bracket to enable it to be carried to the injured person. For up to 10 persons. Supplied in a plastic box complete with wall bracket 268 x 180 x 50mm. 996 FIRST AID Standard First Aid Kits Suitable for the workplace. 10 Person: For small work places up to 10 persons. Supplied in a plastic box complete with handle. 270 x 220 x 90mm. 20 Person: For work places employing up to 20 persons. Supplied in a plastic box complete with handle. 270 x 220 x 90mm. 50 Person: For work places employing up to 50 persons. Supplied in a plastic box complete with handle. 270 x 340 x 100mm. Contents: 1x guidance card. 4x triangular bandages. 20x assorted blue plasters. 2x No.16 eye pads. 6x medium dressings 120 x 120mm. 2x large dressings 180 x 180mm. 1x face shield. Description TFF-996 Small 0.8kg -0750K 2x pairs latex gloves. 6x alcohol-free wipes. 1x pair tuff-cut scissors. 6x safety pins. 2x paraffin gauze pads 100 x 100mm. Roll of blue detectable tape. 30g burns cream. 6x blue finger stalls. Lone Worker Kit Essential First Aid Kit for someone working off-site or on the road. Contents: 1x guidance leaflet. 10x adhesive plasters. 1x No.16 sterile eye pad. 2x triangular bandage. 6x safety pins. 2x medium sterile dressings 12 x 12cm. 1x large sterile dressing 18 x 18cm. 6x alcohol-free wipes. 1pr disposable gloves. 50 Person Kit Description TFF-996 Lone Worker Kit 0.3kg -0500K Burns Kit The Tuffsafe Burns Kit comes in an attractive durable polypropylene red plastic box which is associated with burns treatment. It comes complete with a comprehensive range of water-based burns dressings which soothes and moisturises the burns area by inhibiting fluid loss. Contents: 1x first aid leaflet, 4x pairs disposable gloves, 1x burnshield 50ml solice, 1x heavy-duty clothing snips, 2x medium sterile dressings 12 x 12cm, 12x safety pins, 2x large sterile dressing 18 x 18cm, 4x hydrogel burn blot, 1x burnshield dressing 10 x 10cm, 2x burnshield dressing 20 x 20cm. TFF Person -0710K 20 Person -0720K 50 Person -0730K Refill Kits 10 Person -1420K 20 Person -1430K 50 Person -1440K 10 Person Kit 20 Person Kit Description TFF-996 Large 120g -0820K Contents Chart 10 Person 20 Person 50 Person Guidance leaflet Individually Wrapped Sterile Adhesive Plasters No. 16 Sterile Eye Pad Triangular Bandage Safety Pins Medium Sterile Dressing, 12cm x 12cm Large Sterile Dressing, 18cm x 18cm Alcohol Free Cleansing Wipes Disposable Gloves 1 pair 2 pairs 3 pairs Page 763