New-Tech TM Family. New-Tech 6-13 ADC. New-Tech 9-13 ADC. New-Tech New-Tech 11

Size: px

Start display at page:

Download "New-Tech TM Family. New-Tech 6-13 ADC. New-Tech 9-13 ADC. New-Tech New-Tech 11"

Maria Preston
6 years ago
Views:

New-Tech TM Family The New-Tech series of auto darkening welding helmets features the latest technology. All four models are very lightweight and well balanced.

The helmet shell is designed to give maximum protection to the face but also to the neck and ears.

The cartridges are powered by solar cells and automatically activated by daylight, so there is no need to switch on or off. All helmets are CE (EN 349 and EN 175) approved.

1 New-Tech TM Family The New-Tech series of auto darkening welding helmets features the latest technology. All four models are very lightweight and well balanced. The head gear can be set to fit each individual user for maximum comfort. The New-Tech helmets offer a wide viewing area, giving the welder a feeling of increased space awareness. The helmet shell is designed to give maximum protection to the face but also to the neck and ears. The area in front of the mouth is made larger to ensure a good flow of fresh air and low levels of Carbon Dioxide. The cartridges are powered by solar cells and automatically activated by daylight, so there is no need to switch on or off. All helmets are CE (EN 349 and EN 175) approved. New-Tech 6-13 ADC The New-Tech 6-13 can be used for almost any application. The shade level can be adjusted from DIN 6 to DIN 13, making this helmet very versatile. All settings are made from the outside of the helmet. The helmet features a grinding mode, where the cartridge can be switched off for grinding, there is also a sensitivity and delay function. The New-Tech 6-13 is equipped with ADC technology which will ensure a solid shade level even when viewing the lens at an angle, i.e. positional welding. The unique silver gloss finish on the exterior shell of the New-Tech helps to reflect heat and increases the helmets resistance to high temperatures. This also helps to reduce temperature build up within the helmet. New-Tech 6-13 ADC New-Tech 9-13 ADC The New-Tech 9-13 ADC offers the latest ADC-technology which will ensure a solid shade level even when viewing the lens at an angle, i.e. positional welding. The settings, such as shade level DIN 9 to 13, sensitivity and delay, are made from the outside of the helmet. The New-Tech 9-13 is suitable for almost all applications, TIG, MIG/MAG, MMA and gas welding/cutting. The unique silver gloss finish on the exterior shell of the New-Tech helps to reflect heat and increases the helmets resistance to high temperatures. This also helps to reduce temperature build up within the helmet. New-Tech 9-13 ADC New-Tech 9-13 The New-Tech 9-13 offers step less setting of the shade level between DIN 9 and 13. The settings, including sensitivity, are made from the inside of the helmet. New-Tech The New-Tech welding helmets are extremely versatile, and can be used in combination with ESAB respiratory equipment, hard hats & internal grinding visors. New-Tech prepared for fresh air units New-Tech combined with hard hat New-Tech with internal visor prepared for fresh air New-Tech with hard hat prepared for fresh air See pages 8-9 for further information. New-Tech 11 The New-Tech 11 is a single shade helmet. When activated by the arc the shade goes to DIN 11. This helmet is suitable for maintenance and repair work where mainly MMA and/or MIG/MAG welding is used. New-Tech 11 helmet

2 Spares for New-Tech 6-13 ADC (Fig 1) 1 Helmet Shell Silver New-Tech 6-13 / 9-13 ADC Cartridge New-Tech 6-13 ADC Adjustment knob kit Front Cover Lens New-Tech Front Cover Lens CR39 New-Tech Supporting Frame New-Tech Metal Locking Spring New-Tech Inside Cover Lens New-Tech Sweat Band New-Tech Headgear Complete New-Tech * Fresh Air mounting kit for New-Tech Spares for New-Tech 9-13 ADC (Fig 1) 1 Helmet Shell Silver New-Tech 9-13 / 6-13 ADC Cartridge New-Tech 9-13 ADC Adjustment knob kit Front Cover Lens New-Tech Front Cover Lens CR39 New-Tech Supporting Frame New-Tech Metal Locking Spring New-Tech Inner Cover Lens New-Tech Sweat Band New-Tech Headgear Complete New-Tech * Fresh Air mounting kit for New-Tech Spares for New-Tech 9-13 (Fig 2) 1 Helmet Shell Black New-Tech 9-13 / Cartridge for New-Tech Front Cover Lens New-Tech Front Cover Lens CR39 New-Tech Supporting Frame New-Tech Metal Locking Spring New-Tech Inside Cover Lens New-Tech Sweat Band New-Tech Headgear Complete New-Tech * Fresh Air mounting kit for New-Tech Spares for New-Tech 11 (Fig 2) 1 Helmet Shell Black New-Tech 11 / Cartridge New-Tech Front Cover Lens New-Tech Front Cover Lens CR39 New-Tech Supporting Frame New-Tech Metal Locking Spring New-Tech Inside Cover Lens New-Tech Sweat Band New-Tech Headgear Complete New-Tech * Fresh Air mounting kit for New-Tech Spares for New-Tech 6-13 / 9-13 ADC Fig 1 9 Spares for New-Tech 9-13 / 11 Fig

New-Tech Combinations New-Tech Helmets with Fresh air All New-Tech welding helmets can be used in combination with Air 160, Air 200 and compressed air units.

Select the New-Tech helmet package that you require. 2. Select the hose kit you require. 3. Select the air unit your require.

000 287 New-Tech with Hard Hat By removing the head harness and replacing it with a hard hat adapter (0700 000 230) the New-Tech can be fitted on to ESAB s protective helmet.

The specially designed hard hat meets the highest standards and it s equipped with ratchet adjustment. 1. Select the New-Tech helmet. 2. Select the hard hat

3 New-Tech Combinations New-Tech Helmets with Fresh air All New-Tech welding helmets can be used in combination with Air 160, Air 200 and compressed air units. The helmets are delivered fully assembled, incl. flame resistant head and face seal and air duct. Follow three simple steps to make up your combination: 1. Select the New-Tech helmet package that you require. 2. Select the hose kit you require. 3. Select the air unit your require. New-Tech 6-13 ADC prepared for fresh air New-Tech 9-13 ADC prepared for fresh air New-Tech 9-13 prepared for fresh air New-Tech 11 prepared for fresh air New-Tech with Hard Hat By removing the head harness and replacing it with a hard hat adapter ( ) the New-Tech can be fitted on to ESAB s protective helmet. The combination is very well balanced and comfortable to wear. The New-Tech helmet can be detached and reattached in a second. The specially designed hard hat meets the highest standards and it s equipped with ratchet adjustment. 1. Select the New-Tech helmet. 2. Select the hard hat adapter. 3. Select the hard hat. New-Tech 6-13 ADC New-Tech 9-13 ADC New-Tech New-Tech Hard hat adapter for New-Tech Hard hat Yellow Hard hat White Hard hat Blue Hard hat Green Hard hat Red New-Tech with Internal Visor The New-Tech with internal visor is delivered with an air fed grade B impact protection grinding visor complete with a face and head seal. The grinding visor can be fitted in any of the standard New-Tech helmets and can be combined with either the Air 160, Air 200 or compressed air respiratory systems. This would be the ideal system for all applications involved in welding fabrication. One head system for welding and grinding. Follow three simple steps to make up your combination: 1. Select the New-Tech helmet package that you require. 2. Select the hose kit you require. 3. Select the air unit your require. Spares for New-Tech Combinations New-Tech Helmets with Hard Hat & Fresh Air All New-Tech welding helmets can be used in combination with a hard hat, Air 160, Air 200 and compressed air units. The helmets are delivered fully assembled, incl. hard hat with internal air duct and flame resistant head and face seal. Follow three simple steps to make up your combination: 1. Select the New-Tech helmet package that you require. 2. Select the hose kit you require. 3. Select the air unit your require. New-Tech 6-13 ADC prepared for Fresh air + hard hat New-Tech 9-13 ADC prepared for Fresh air + hard hat New-Tech 9-13 prepared for Fresh air + hard hat New-Tech 11 prepared for Fresh air + hard hat Head Seal for internal visor Face Seal for internal visor Spare Visor for internal visor Tear off visor for internal visor Head Seal for hard hat Face Seal for hard hat Hard Hat with internal air duct Accessories for New-Tech New-Tech Magnifying Lenses The New-Tech can be equipped with a magnifying lens. The magnifying lens is fitted from the inside (so no adapter is needed). There are four different diopters available, +1,0 / +1,5 / +2,0 / +2,5. Diopter +1,0 New-Tech Diopter +1,5 New-Tech Diopter +2,0 New-Tech Diopter +2,5 New-Tech New-Tech Hearing Protection Hearing protection with neck support is available for the New-Tech. SNR rating = 26 db. Hearing protection with neck support New-Tech 6-13 ADC with Internal visor New-Tech 9-13 ADC with Internal visor New-Tech 9-13 with Internal visor New-Tech 11 with Internal visor

Eye-Tech TM II Family The Eye-Tech II family consists of four helmets that represent a professional range within the welding helmets.

The helmet shell is extremely tolerable to high temperatures, whilst the extended space between the front cover lens and the ADF allows the air to cool, which offers extended working time in high

All Eye-Tech II are CE (EN379 and EN175), CSA, ANSI, AS/NZA and DIN approved.

All adjustments, such as the shade setting, the sensitivity and the delay, are controlled on the satellite, found on the outside of the helmet shell.

Eye-Tech II 5-13 0700 000 907 Eye-Tech II 9-13 By setting the manual/auto switch to auto, the helmet will detect the intensity from the welding arc and set the shade accordingly.

As all the controls on the Eye-Tech II, 9-13 are on the outside of the helmet, you do not have to take the helmet off to set the sensitivity or the delay.

4 Eye-Tech TM II Family The Eye-Tech II family consists of four helmets that represent a professional range within the welding helmets. The helmet is extremely strong and robust and is ideally suited for heavy duty welding applications. The helmet shell is extremely tolerable to high temperatures, whilst the extended space between the front cover lens and the ADF allows the air to cool, which offers extended working time in high temperature situations. The cartridges are powered by solar cells with battery back up, and are both water proof and shock resistant. All Eye-Tech II are CE (EN379 and EN175), CSA, ANSI, AS/NZA and DIN approved. Eye-Tech II 5-13 The Eye-Tech II 5-13 is suitable for almost all applications, MIG, MMA, and TIG welding, even on very low amperage arc welding, grinding, gas welding and plasma cutting. All adjustments, such as the shade setting, the sensitivity and the delay, are controlled on the satellite, found on the outside of the helmet shell. The grinding mode (DIN 4) can be easily activated from the outside. Eye-Tech II Eye-Tech II 9-13 By setting the manual/auto switch to auto, the helmet will detect the intensity from the welding arc and set the shade accordingly. It is also possible to fine-tune the selected shade using the potentiometer. Alternatively, you can set the switch to manual and set the shade level yourself. As all the controls on the Eye-Tech II, 9-13 are on the outside of the helmet, you do not have to take the helmet off to set the sensitivity or the delay. Eye-Tech II Eye-Tech II The is an excellent helmet for people working in repair and maintenance as it provides shade cover for MMA and MIG welding at between amps. The helmet can also be used for TIG welding at between amps. The shade setting potentiometer has been put on the outside of the helmet from where it can be set even with a gloved hand. Eye-Tech II The Eye-Tech II welding helmets are extremely versatile, and can be used in combination with ESAB respiratory equipment, hard hats & internal grinding visors. Eye-Tech II prepared for fresh air units Eye-Tech II combined with hard hat Eye-Tech II with internal visor prepared for fresh air Eye-Tech II with hard hat prepared for fresh air Eye-Tech II 10/11 The entry level helmet in the Eye-Tech II range is the 10/11, a two shade helmet designed for MIG/MAG and MMA welding. Eye-Tech II 10/ See pages for further information

5 Spares for Eye-Tech II 5-13 (Fig 3) 1 Front cover lens Eye-Tech II Clip set for Eye-Tech II Eye-Tech II 5-13 without cartridge Excenter knob Inside cover lens Eye-Tech II Satellite fixing frame Sweat Band Headgear Cartridge Eye-Tech II Potentiometer knob Sensitivity adjustment * Fresh Air mounting kit for Eye-Tech II Spares for Eye-Tech II (Fig 4) 1 Front cover lens Eye-Tech II Clip set yellow Eye-Tech II without cartridge Excenter knob Inside cover lens Eye-Tech II Satellite fixing frame Sweat Band Head Band Cartridge Eye-Tech II Sensor bar Eye-Tech II Potentiometer knob Eye-Tech II * Fresh Air mounting kit for Eye-Tech II Spares for Eye-Tech II 9-13 (Fig 3) 1 Front cover lens Eye-Tech II Clip set yellow Eye-Tech II 9-13 without cartridge Excenter knob Inside cover lens Eye-Tech II Satellite fixing frame Sweat Band Headgear Cartridge Eye-Tech II Potentiometer knob Eye-Tech II Sensitivity adjustment * Fresh Air mounting kit for Eye-Tech II Spares for Eye-Tech II (Fig 4) 1 Front cover lens Eye-Tech II Clip set yellow Eye-Tech II without cartridge Excenter knob Inside cover lens Eye-Tech II Satellite fixing frame Sweat Band Head Band Cartridge Eye-Tech II Sensor bar Eye-Tech II * Fresh Air mounting kit for Eye-Tech II Spares for Eye-Tech II 5-13 / 9-13 Fig 3 8 Spares for Eye-Tech II / Fig Applicable only to the Eye-Tech II

Eye-Tech II Combinations Eye-Tech II Helmets with Fresh Air All Eye-Tech II helmets can be used in combination with the Air 160, Air 200 and compressed air units.

Select the Eye-Tech II helmet package you require. 2. Select the hose kit you require. 3. Select the air unit you require.

air 0700 002 972 Eye-Tech II with Hard Hat and Air Supply For environments where both head and respiratory protection are required the Eye-Tech II with hard hat and air supply is the ideal solution.

the system can be connected to either the Air 160/200 or breathable compressed air using the standard Eye-Tech air hose (0468 127 011). 1. Select the Eye-Tech II helmet package that you require. 2.

Eye-Tech II 5-13 with hard hat prepared for air 0700 000 920 Eye-Tech II 9-13 with hard hat prepared for air 0700 000 921 Eye-Tech II 10-12 with hard hat prepared for air 0700 000 922 Eye-Tech II

6 Eye-Tech II Combinations Eye-Tech II Helmets with Fresh Air All Eye-Tech II helmets can be used in combination with the Air 160, Air 200 and compressed air units. The helmets are delivered fully assembled and, include flame resistant head and face seal and air duct. Follow the three simple steps to make up your combination. 1. Select the Eye-Tech II helmet package you require. 2. Select the hose kit you require. 3. Select the air unit you require. Eye-Tech II 5-13 prepared for fresh air Eye-Tech II 9-13 prepared for fresh air Eye-Tech II 10/12 prepared for fresh air Eye-Tech II 10/11 prepared for fresh air Eye-Tech II with Hard Hat and Air Supply For environments where both head and respiratory protection are required the Eye-Tech II with hard hat and air supply is the ideal solution. The system consists of an Eye-Tech II helmet and a high quality hard hat with internal air duct.the system can be connected to either the Air 160/200 or breathable compressed air using the standard Eye-Tech air hose ( ). 1. Select the Eye-Tech II helmet package that you require. 2. Select the hose kit you require. 3. Select the air unit your require. Eye-Tech II 5-13 with hard hat prepared for air Eye-Tech II 9-13 with hard hat prepared for air Eye-Tech II with hard hat prepared for air Eye-Tech II with hard hat prepared for air Eye-Tech II with Hard Hat By removing the head harness and replacing it with a hard hat adapter the Eye-Tech II can be fitted on to ESAB s protective helmet. The combination is very well balanced and comfortable to wear. The Eye-Tech II helmet can be detached and reattached in a second. The specially designed hard hat meets the highest standard and it is equipped with ratchet adjustment. 1. Select the Eye-Tech II helmet. 2. Select the hard hat adapter. 3. Select the hard hat. Spares for Eye-Tech II Combinations Head Seal for internal visor Face Seal for internal visor Spare Visor for internal visor Tear off visor for internal visor Accessories for Eye-Tech II Head Seal for hard hat Face Seal for hard hat Hard Hat with internal air duct Eye-Tech II Eye-Tech II Eye-Tech II Eye-Tech II Hard hat adapter Eye-Tech Hard hat Eye-Tech Yellow Hard hat Concept White Hard hat Concept Blue Hard hat Concept Green Hard hat Concept Red Eye-Tech II Magnifying Lenses The Eye-Tech II can be equipped with a magnifying lens. The magnifying lens is fitted from the inside (so no adapter is needed). There are four different diopters available, +1,0 / +1,5 / +2,0 / +2,5. Diopter +1,0 Eye-Tech II Diopter +1,5 Eye-Tech II Diopter +2,0 Eye-Tech II Diopter +2,5 Eye-Tech II Eye-Tech II with Internal Visor The Eye-Tech II can be used with an air fed grade B impact protection grinding visor complete with a face and head seal. The grinding visor can be fitted to any of the standard Eye-Tech II helmets and can be combined with either the Air 160, Air 200 or breathable compressed air respiratory systems. This would be the ideal system for all applications involved in welding fabrication. One head system for welding and grinding. 1. Select the Eye-Tech II package that you require. 2. Select the hose kit you require. 3. Select the air unit your require. Eye-Tech II Hearing Protection Hearing protection with neck support is available for the Eye-Tech II. SNR rating = 26 db. Hearing protection with neck support Eye-Tech II 5-13 with internal visor Eye-Tech II 9-13 with internal visor Eye-Tech II with internal visor Eye-Tech II with internal visor

Eye-Tech Family The Eye-Tech family consists of four helmets that represent a professional range within welding helmets.

years ago. The Eye-Tech helmets still remains a popular choice amongst the ordinary common welder.

All Eye-Tech are CE (EN379 and EN175), CSA, ANSI, AS/NZA and DIN approved.

The latest LCD technology enables you to adjust the shade between DIN 5-9 and/or DIN 9-13.

The Eye-Tech 5-13 can be used in all welding applications including oxy/fuel gas welding.

be adjusted from the outside during welding.

7 Eye-Tech Family The Eye-Tech family consists of four helmets that represent a professional range within welding helmets. The Eye-Tech original helmets have proven to be one of the most reliable helmets in their class, since they were launched over fifteen years ago. The Eye-Tech helmets still remains a popular choice amongst the ordinary common welder. They have cartridges powered by solar cells with battery back up, and are both water proof and shock resistant. All Eye-Tech are CE (EN379 and EN175), CSA, ANSI, AS/NZA and DIN approved. Eye-Tech 5-13 The ESAB Eye-Tech 5-13 offers unlimited personal settings. The latest LCD technology enables you to adjust the shade between DIN 5-9 and/or DIN The grinding mode (DIN 4) can easily be activated from the outside. The Eye-Tech 5-13 can be used in all welding applications including oxy/fuel gas welding. Eye-Tech Eye-Tech 9-13 The ESAB Eye-Tech 9-13 is equipped with step-less shade setting of between 9 and 13 and it can be adjusted from the outside during welding. Eye-Tech Eye-Tech The ESAB Eye-Tech has a switch on the inside of the helmet for easy adjustment between shade areas and Eye-Tech The Eye-Tech welding helmets are extremely versatile, and can be used in combination with ESAB respiratory equipment and hard hats. Eye-Tech prepared for fresh air units Eye-Tech combined with hard hat See page 20 for further information. Eye-Tech 10/11 The ESAB Eye-Tech 10/11 has a switch on the inside of the helmet that gives you a fixed shade level of 10 or 11 during welding. Eye-Tech 10/

Spares for Eye-Tech 5-13 (Fig 5) Spares for Eye-Tech 9-13 (Fig 6) Spares for Eye-Tech 10-12 (Fig 7) 1 Helmet shell Eye-Tech 5-13 0700 000 034 2 Cartridge 5-13 0700 000 035 3 Front cover lens 0700 000

Inside cover lens 0700 000 011 * Fresh air mounting kit for Eye-Tech 0700 002 030 1 Helmet shell Eye-Tech 9-13 0700 000 002 3 Front cover lens holder 0700 000 006 4 Front cover lens 0700 000 010 5

005 * Fresh air mounting kit for Eye-Tech 0700 002 030 1 Helmet shell Eye-Tech 10-12 0700 000 002 3 Front cover lens holder 0700 000 006 4 Front cover lens 0700 000 010 5 Inside cover lens 0700 000

8 Spares for Eye-Tech 5-13 (Fig 5) Spares for Eye-Tech 9-13 (Fig 6) Spares for Eye-Tech (Fig 7) 1 Helmet shell Eye-Tech Cartridge Front cover lens Front cover lens holder Potentiometer knob Sensitivity knob Satellite cover plate Headgear Sweatband * Inside cover lens * Fresh air mounting kit for Eye-Tech Helmet shell Eye-Tech Front cover lens holder Front cover lens Inside cover lens Excenter knob Potentiometer knob Sensor bar Cartridge * Headgear * Sweatband * Fresh air mounting kit for Eye-Tech Helmet shell Eye-Tech Front cover lens holder Front cover lens Inside cover lens Excenter knob Cartridge Sensor bar * Headgear * Sweatband * Fresh air mounting kit for Eye-Tech Spares for Eye-Tech 5-13 Fig 5 Spares for Eye-Tech 9-13 Fig 6 Spares for Eye-Tech / 10/11 Fig 7 18 Spares for Eye-Tech 10/11 1 Helmet shell Eye-Tech 10/ Front cover lens holder Front cover lens Inside cover lens Excenter knob Cartridge 10/ Sensor bar * Headgear * Sweatband * Fresh air mounting kit for Eye-Tech

Eye-Tech Combinations Accessories for Eye-Tech Eye-Tech Magnifying Lenses Eye-Tech with Fresh Air All Eye-Tech helmets can be used in combination with ESAB Air 160, Air 200 and CA respiratory units.

Select the Eye-Tech helmet package you require. 2. Select the hose kit you require. 3. Select the air unit you require.

925 Eye-Tech with Hard Hat The Eye-Tech can be equipped a magnifying lens. The magnifying lens is fitted from the inside, using with adapter (0700 000 030).

5 Eye-Tech 0367 951 004 Adapter for diopter 0700 000 030 Eye-Tech Hearing Protection Hearing protection with neck support is available for the Eye-Tech. SNR rating = 26 db.

9 Eye-Tech Combinations Accessories for Eye-Tech Eye-Tech Magnifying Lenses Eye-Tech with Fresh Air All Eye-Tech helmets can be used in combination with ESAB Air 160, Air 200 and CA respiratory units. The helmets are delivered fully assembled and, incl. Flame resistant head and face seal and air duct. Follow the three simple steps to make up your combination. 1. Select the Eye-Tech helmet package you require. 2. Select the hose kit you require. 3. Select the air unit you require. Eye-Tech 5-13 prepared for fresh air Eye-Tech 9-13 prepared for fresh air Eye-Tech 10/12 prepared for fresh air Eye-Tech 10/11 prepared for fresh air Eye-Tech with Hard Hat The Eye-Tech can be equipped a magnifying lens. The magnifying lens is fitted from the inside, using with adapter ( ). There are four different diopters available, +1.0 / +1.5 / +2.0 / Diopter +1.0 Eye-Tech Diopter +1.5 Eye-Tech Diopter +2.0 Eye-Tech Diopter +2.5 Eye-Tech Adapter for diopter Eye-Tech Hearing Protection Hearing protection with neck support is available for the Eye-Tech. SNR rating = 26 db. Hearing protection with neck support By removing the head harness and replacing it with a hard hat adapter the Eye-Tech can be fitted on to ESAB s protective helmet. The combination is very well balanced and comfortable to wear. The Eye-Tech helmet can be detached and reattached in a second. The specially designed hard hat meets the highest standard and it s equipped with ratchet adjustment. 1. Select the Eye-Tech helmet package you require. 2. Select the hard hat adapter you require. 3. Select the hard hat you require. Eye-Tech Eye-Tech Eye-Tech Eye-Tech 10/ Hard hat adapter Eye-Tech Hard hat Eye-Tech Yellow Hard hat Concept White Hard hat Concept Blue Hard hat Concept Green Hard hat Concept Red

Origo -Tech 9-13 The new stylish high-tech helmet design from ESAB. The new shell is available in 2 striking high gloss colours, Yellow or Black.

The ESAB variable shade ADF uses the latest technology and has proven reliability.

The Helmet is delivered in an ESAB display box, fully assembled and ready to use.

5 ESAB 9-13 ADF Cradle 0700 000 235 6 Lens Retainer with Screws 0700 000 237 Spares for Origo -Tech 9-13 Fig 8 6 2 1 Origo -Tech 9-13 Black The Origo -Tech 9-13 features an external shade adjustment

Origo -Tech Black 0700 000 296 5 3 4 Origo -Tech 9-13 Yellow The Origo -Tech 9-13 features an external shade adjustment Origo -Tech Yellow 0700 000 298 Available from July 2009 Origo Air The Origo

10 Origo -Tech 9-13 The new stylish high-tech helmet design from ESAB. The new shell is available in 2 striking high gloss colours, Yellow or Black. The helmet features the ESAB comfort headgear, whilst the light weight shell offers superior face, head, ear & neck protection, which allows for welding in all positions. The ESAB variable shade ADF uses the latest technology and has proven reliability. The ADF is screw retained and sits in a fully moulded light seal cradle, which also creates a slight convex curve on the front spatter lens for extra security and strength. The Helmet is delivered in an ESAB display box, fully assembled and ready to use. Spares for Origo -Tech 9-13 (Fig 8) 1 ESAB Head Gear Pro Sweat Band Head Gear Pro Front Cover Lens Origo -Tech Inside Cover Lens Origo -Tech ESAB 9-13 ADF Cradle Lens Retainer with Screws Spares for Origo -Tech 9-13 Fig Origo -Tech 9-13 Black The Origo -Tech 9-13 features an external shade adjustment between DIN 9 and DIN 13. The delay and sensitivity can be adjusted from the inside. The Origo -Tech 9-13 is suitable for MIG/MAG, MMA and TIG (over 20 amps). Origo -Tech Black Origo -Tech 9-13 Yellow The Origo -Tech 9-13 features an external shade adjustment between DIN 9 and DIN 13. The delay and sensitivity can be adjusted from the inside. The Origo -Tech 9-13 is suitable for MIG/MAG, MMA and TIG (over 20 amps). Origo -Tech Yellow Available from July 2009 Origo Air The Origo Air is a battery powered respiratory unit designed to fit the Origo-Tech welding helmets. The unit provides clean, filtered air to increase the comfort and safety for the welder. The Origo Air is delivered complete with an 8-hour battery, P3 filter, comfort pad, waist belt and an air hose with a Proban hose cover fitted. The unit is supplied with an intelligent charger, which will ensure a prolonged life time of the battery, by reducing the risk of over charging. The Origo Air is also equipped with a low flow alarm, which will give an audible signal when the filter is blocked, or the battery power is running low. The complete system is comfortable, lightweight and durable. Origo Air Complete (EU and UK) Origo Tech 9-13 Black prepared for air Origo Tech 9-13 Yellow prepared for air

Albatross Family The Albatross series is a range of passive and automatic flip up welding helmets.

The shell is made from extremely light and durable material, offering increased comfort to the wearer over long periods of time, whilst the headgear is comfortable easy to adjust.

Albatross 3000X 9-13 Automatic The Albatross 3000X 9-13 Automatic is a combined ADF helmet and a grinding visor.

11 Albatross Family The Albatross series is a range of passive and automatic flip up welding helmets. All the helmets provide a complete and flexible system, which can be fitted with hard hats, hearing protectors and fresh air units. The shell is made from extremely light and durable material, offering increased comfort to the wearer over long periods of time, whilst the headgear is comfortable easy to adjust. The helmets are delivered fully assembled (and are ready to use) including chin protection. CE approved. Albatross 3000X 9-13 Automatic The Albatross 3000X 9-13 Automatic is a combined ADF helmet and a grinding visor. The ADF is fitted in a flip up front which opens to a panoramic grinding visor (grade B impact resistance) when lifted. The ADF offers a shade setting between DIN 9 and DIN 13. Albatross 3000X 9-13 Automatic Standard Albatross 3000X 9-13 Automatic prepared for fresh air Albatross 1000, 60 x 110 and 90 x 110 The ESAB Albatross 1000 has a flip up front in to which a welding glass is fitted. There is also a protective plastic lens that gives facial protection when the front is folded up. The Albatross Toughweld welding helmet is made of heat resistant polyester (up to 240 degrees Celcius), suitable for heavy duty welding. Welding glass 10 DIN included in all helmets. Albatross x 110 standard Albatross x 110 for hard hat (Peltor adapter ) Albatross x 110 for hard hat (FH aluminium adapter ) Albatross x 110 for fresh air Albatross x 110 for hard hat & fresh air Albatross Toughweld, 60 x 110 standard Albatross Toughweld, 60 x 110 fresh air Albatross 1000, 90 x 110 standard Albatross 1000, 90 x 110 for hard hat Albatross 1000, 90 x 110 for fresh air Albatross 1000, 90 x 110 for hard hat & fresh air Albatross 2000 The inner protective lens on the Albatross 2000 has a shade 2. The specially designed flip up front is equipped with a 60 x 110mm welding glass, however it is also possible to view the starting point of the weld through the viewing area. When the arc is struck the user can, by tilting the head, continue to see through the welding lens, which is beneficial when precision starting is essential. Welding glass DIN 9 included. Albatross 2000 standard Albatross 2000 for hard hat Albatross 2000 for fresh air Albatross 2000 for hard hat and fresh air Albatross 3000X The Albatross 3000X is a combination of a welding helmet and a grinding visor. The large panoramic window gives an excellent overview and good protection whilst grinding. The welding visor can be supplied in different window sizes. Welding glass 10 DIN included. Albatross Combinations Albatross 1000, incl Air 160 8h 60 x Albatross 1000, incl Air CA 60 x Albatross 1000, incl hard hat 60 x Albatross 1000, incl hard hat, hearing protectors 60 x Albatross 1000, incl hard hat, Air 160 8h 60 x Albatross 1000, incl hard hat, Air 160 8h, hearing protectors 60 x Albatross 1000, incl hard hat, Air CA 60 x Albatross 1000, incl hard hat, Air CA, hearing protectors 60 x Albatross 1000, incl Air 160 8h 90 x Albatross 1000, incl Air CA 90 x Albatross 1000, incl hard hat 90 x Albatross 1000, incl hard hat, hearing protectors 90 x Albatross 1000, incl hard hat, Air 160 8h 90 x Albatross 1000, incl hard hat, Air 160 8h, hearing protectors 90 x Albatross 1000, incl hard hat, Air CA 90 x Albatross 1000, incl hard hat, Air CA, hearing protectors 90 x Albatross 2000, incl Air 160 8h Albatross 2000, incl Air CA Albatross 2000, incl hard hat Albatross 2000, incl hard hat, hearing protectors Albatross 2000, incl hard hat, Air 160 8h Albatross 2000, incl hard hat, Air 160 8h, hearing protectors Albatross 2000, incl hard hat, Air CA Albatross 2000, incl hard hat, Air CA, hearing protectors Albatross 3000X, incl Air 160 8h Albatross 3000X, incl Air CA Albatross 3000X, incl hard hat Albatross 3000X, incl hard hat, hearing protectors Albatross 3000X, incl hard hat, Air 160 8h Albatross 3000X, incl hard hat, Air 160 8h, hearing protectors Albatross 3000X, incl hard hat, Air CA Albatross 3000X, incl hard hat, Air CA, hearing protectors Albatross 3000X standard Albatross 3000X for fresh air Albatross 3000X for hard hat Albatross 3000X for hard hat and fresh air

12 Spares for Albatross 1000 Standard and Fresh Air (Fig 8) 1 Flip-up frame 60 x Flip-up frame 90 x Plastic cover lens 60 x Plastic cover lens 90 x Spring 60 x Spring 90 x Head gear Spare parts for head gear Air hose including adapter Adapter Air tight seal Face seal including bib Welding lens DIN 10, 60 x Welding lens DIN 10, 90 x * Sweatband Spares for Albatross 1000 for Hard Hat and Fresh Air (Fig 9) 1 Flip-up frame 60 x Flip-up frame 90 x Plastic cover lens 60 x Plastic cover lens 90 x Spring 60 x Spring 90 x Air hose including adapter Adapter Air tight seal Face seal including bib Welding lens DIN 10, 60 x Welding lens DIN 10, 90 x Helmet adapter * Sweatband Spares for Albatross 1000 Fig 8 Spares for Albatross 1000 Fig

13 Spares for Albatross 2000 Standard and Fresh Air (Fig 10) 1 Flip-up frame 60 x Protective lens DIN Plastic cover lens 60 x Spring 90 x Spring 60 x Head gear Spare parts for head gear Air hose including adapter Adapter Air tight seal Face seal including bib Welding lens DIN * Sweatband Spares for Albatross 2000 for Hard Hat and Fresh Air (Fig 11) 1 Flip-up frame 60 x Protective lens DIN Plastic cover lens 60 x Spring 90 x Spring 60 x Air hose including adapter Adapter Air tight seal Face seal including bib Welding lens DIN Helmet adapter * Sweatband Spares for Albatross 2000 Fig 10 Spares for Albatross 2000 Fig

14 Spares for Albatross 3000X Standard and Fresh Air (Fig 12) 1 Visor 90 x Plastic Cover Lens 90 x Spring 90 x Big Lens Albatross 3000X Head Gear Spare parts for Head gear Air Hose Including Adapter Adapter Air Tight Seal Face Seal including Bib Welding Lens DIN Hinge set for Visor Spares for Albatross 3000X for Hard Hat and Fresh Air (Fig 13) 1 Visor 90 x Plastic Cover Lens 90 x Spring 90 x Big Lens Albatross 3000X Air Hose including adapter Adapter Air Tight Seal Face Seal including Bib Welding Lens DIN Helmet adapter Hinge set for Visor Spares for Albatross 3000X Fig 12 Spares for Albatross 3000X Fig

The inner lenses are available in a number of different shades; DIN 2, DIN 3 and DIN 5. The helmet can therefore also be used for grinding, gas cutting, gas welding and plasma cutting.

15 Globe-Arc The Globe-Arc helmet has been designed to provide the ideal protection for all kinds of metal working. The inner lens in combination with the outer lens provide full protection against IR, UV and visible light making it suitable for welding. The inner lenses are available in a number of different shades; DIN 2, DIN 3 and DIN 5. The helmet can therefore also be used for grinding, gas cutting, gas welding and plasma cutting. Globe-Arc The Globe-Arc is a unique design in flip front welding and grinding helmets. The visor provides effective protection from UV and IR radiation when the visor is both open and closed, and is available in different shade levels. The helmet is equipped with a strong and comfortable head gear. Globe-Arc Shade Globe-Arc Shade Available from May 2009 Spares for Globe-Arc (Fig 14) 1 Hinge Set Large Inner Visor Globe-Arc DIN Large Inner Visor Globe-Arc DIN Large Inner Visor Globe-Arc DIN Outer Flip Visor Globe-Arc DIN Outer Flip Visor Globe-Arc DIN Outer Flip Visor Globe-Arc DIN Flip Up Globe-Arc Holder Headgear Globe-Arc Sweat Band Spares for Globe-Arc Fig

Eco-Arc Welding Helmets The new Eco-Arc is the latest design in flip front passive welding helmets.

Available in six different sized flip front options, the helmet also adopts the new Eco Headgear, with 4 rake positions and 3 longitudinal adjustment positions for precise nose to shell adjustment.

Eco-Arc Helmets Eco-Arc 60 x 110 un-assembled - 20 pcs* 0700 000 938 Eco-Arc 60 x 110 individually packed 0700 000 950 Eco-Arc 90 x 110 un-assembled - 20 pcs* 0700 000 939 Eco-Arc 51 x 108

16 Eco-Arc Welding Helmets The new Eco-Arc is the latest design in flip front passive welding helmets. With a light weight Poly Propylene shell, and outstanding facial protection, the helmet is suitable for all position welding. Available in six different sized flip front options, the helmet also adopts the new Eco Headgear, with 4 rake positions and 3 longitudinal adjustment positions for precise nose to shell adjustment. The helmet is supplied complete with outer protection lens, shade 11 mineral glass and the unique large internal protection glass. Eco-Arc Helmets Eco-Arc 60 x 110 un-assembled - 20 pcs* Eco-Arc 60 x 110 individually packed Eco-Arc 90 x 110 un-assembled - 20 pcs* Eco-Arc 51 x 108 un-assembled - 20 pcs* Eco-Arc 83 x 108 un-assembled - 20 pcs * Eco-Arc 98 x 75 un-assembled - 20 pcs* Eco-Arc 55 x 110 un-assembled - 20 pcs* * This helmet is delivered with the headgear unattached. Spares for Eco-Arc Helmets (Fig 15) 1 Inside Cover Lens Eco-Arc Sweat Band Lens Retaining Clip 60 x Lens Retaining Clip 90 x Lens Retaining Clip 98 x Lens Retaining Clip 83 x Lens Retaining Clip 55 x Lens Retaining Clip 51 x Spares for Eco-Arc Helmets Fig 15 Please see pages 52 for standard size lenses

Euromask Euromask is a helmet for welding and cutting that provides effective protection from UV and IR radiation. The visor must always be down when welding.

Also available with a protective helmet or prepared for use with a fresh air unit. Euromask DIN 10 1.7 + 8 DIN 0000 500 501 Euromask DIN 11 1.

500 502 Euromask for protective helmet DIN 11 0000 500 503 Euromask DIN 10 prepared for air 0700 000 901 Euromask DIN 11 prepared for air 0700 000 902 Air Hose 0468 127

protector clear (inner glass) 0000 500 526 UV protection DIN 1.

Spare part for head gear 0000 500 520 Hinge set for visor 0000 595 208 Face seal for fresh air helmet 0700 002 078 ESAB Easy-Lite The Easy-Lite is a small but effective

The Easy-Lite has also proven to be an excellent tool for adapting to a stainless steel inspection mirror, the bright LED is perfect for highlighting the weld in difficult

ESAB Easy-Lite 0700 014 040 Leather Mask This leather mask can be used when there is not enough space for welding with a conventional welding helmet. Glass size 90 x 110mm.

Lens aperture 108 x 83mm (4 1 /4 x 3 1 /4 ).

17 Euromask Euromask is a helmet for welding and cutting that provides effective protection from UV and IR radiation. The visor must always be down when welding. The large field of vision provides effective protection for the eyes when grinding. Euromask can be combined with various IR and UV protectors. Also available with a protective helmet or prepared for use with a fresh air unit. Euromask DIN DIN Euromask DIN DIN Euromask with protective helmet DIN Euromask with protective helmet DIN Euromask for protective helmet DIN Euromask for protective helmet DIN Euromask DIN 10 prepared for air Euromask DIN 11 prepared for air Air Hose Chin cover Visor DIN Visor DIN Visor Large DIN Visor DIN Visor large DIN UV protector clear (inner glass) UV protection DIN 1.7 (inner glass) UV protection DIN 3 (inner glass) UV protection DIN 5 (inner glass) Visor frame Head gear Spare part for head gear Hinge set for visor Face seal for fresh air helmet ESAB Easy-Lite The Easy-Lite is a small but effective light source, that can be easily attached to your welding helmet, hard hat, spectacle or anywhere that additional light is required. The Easy-Lite has also proven to be an excellent tool for adapting to a stainless steel inspection mirror, the bright LED is perfect for highlighting the weld in difficult places where there is insufficient light. The LED is turned on by a simple switch, and the battery has over 50 hours of life. ESAB Easy-Lite Leather Mask This leather mask can be used when there is not enough space for welding with a conventional welding helmet. Glass size 90 x 110mm. Leather mask SF11 Helmet Short Shell A traditional short shell helmet made from high performance glass fibre. Weight 600g. Lens aperture 108 x 83mm (4 1 /4 x 3 1 /4 ). SF Rubber glass holder Pk Helmet head band foam Pk Lens retaining nut Pk Helmet head band foam Pk 10 (white) SF8 Lightweight Helmet A lightweight thermoplastic helmet weighing 420g. Lens aperture 108 x 83mm (4 1 /4 x 3 1 /4 ). SF Rubber glass holder Pk Helmet head band foam Pk Lens retaining nut Pk Helmet head band foam Pk 10 (white) Hand Screen E A safe welding screen with replaceable welding glass, 60 x 110mm. Hand screen E

Hand Screen H A safe welding screen that also

Replaceable welding glass, size 60 x 110mm.

Hand screen H with clear and coloured glass 0160

Deep shell fibre glass screen. Weighs 525g.

18 Hand Screen H A safe welding screen that also protects the hand. Replaceable welding glass, size 60 x 110mm. Weight 330g. Hand screen H with clear and coloured glass Hand Screen Delta Welding screen that protects the face as well as the hand. The window size is 90 x 110mm. Welding glass not included. Hand screen Delta Hand Screen SF12 Deep shell fibre glass screen. Weighs 525g. Lens aperture 108 x 83mm (4 1 /4 x 3 1 /4 ). Hand screen SF Hand screen SF2 Flat fronted fibreglass hand screen. Weight 450g. Lens aperture 108 x 83mm (4 1 /4 x 3 1 /4 ). Hand screen SF

new. efficient. optimal. swiss made Automatically better welding

new. efficient. optimal. swiss made Automatically better welding new design. efficient performance. optimal price. The optrel neo p550 combines the advantages of the proven p550 helmet shell with the newest