TECHNICAL RESPIRATORY

Transcription

1 TECHNICAL RESPIRATORY 1

2 Escape/Evacuation Equipment / (PAPR) Supplied Air Respirators EVAMASQUE DIN Filtering half-mask for 15 minutes of evacuation from chemical environments. Convenient, simple and safe to use. Compact and lightweight, for easy wearing on a belt, visual comfort. Storage up to 12 years. Moulded half mask in black EPDM, elastomer harness, silicone and neoprene valves. DIN Full face mask with filter Art No Maintenance Kit Art No Protective case Art No Adhesive Tape - 50m/164 feet Art No EVAMASQUE with elastic headband Art No TURBOVISOR MV Complete kit Turbovisor MV 8 hours, consisting of a hood with polycarbonate screen, two visor covers, one cotton neck roll, one non-woven face seal and one motor unit. One 8-hour battery to be worn around the waist, one battery charger, one main filter TH2 + one prefilter and one flow speed test disk. Complete kit Turbovisor MV 6 hours, consisting of a hood with polycarbonate screen, two visor covers, one cotton neck roll, one non-woven face seal, one motor unit. One 6-hour battery attached to head, one battery charger, one main filter TH2 and one prefilter and one flow speed test disk. Complete kit turbovisor mv 8 hours Art No Complete kit turbovisor mv 6 hours Art No KOLIBRI Protection against impacts. Compact design, focused field of vision reduces light reflection. Washable face seal: flexible and elastic, easy replacement, ensuring increased operator comfort. Disposable visor that protects the main visor. Headband equipped with a sweat band adjustable width and height for optimal comfort. Kolibri -VL Art No. A disposable visors Art No. A headbands with sweat band Art No. A OPENGO Compact and easy to use. Escape hood for use in high-risk chemical environments. High visibility hood with two reflective stripes, two large elastic bands, molded elastomer and large panoramic screen. Versions ABEK, ABEK1 P3 and IPR available, EN 140, EN Opengo with ABEK1 filter Art No Opengo with ABEK1 P3 filter Art No Opengo with IPR D91 filter Art No COMPACT AIR 200 A powered air supply system designed to provide respiratory protection against gases, vapour and particles depending on the type of filter element used. Lithium-ion battery for longer use. EN12941 covering respiratory protection apparatus (hoods/welding helmets), EN12942 for respiratory protection apparatuses (masks). With bayonet for hood Art No. A DIN thread version for mask Art No. A Belt IN PVC for decontamination Art No. A Bayonet hose 970mm Art No. A Lithium-ion battery Art No. CA222EU Breathing tube covers -10 pieces Art No. A JUNIOR A For optimal protection and a wide field of view. Wide transparent visor. Full face protection and washable face seal. One clip system, ensure easy installation of disposable visors. Acetate components, optional cape. Junior A-VL Art No. A disposable visors (JA) Art No. A Five visors (JA) Art No. A AIRVISOR 2 Standard airvisor 2 paint spraying kit complete with: acetate chemical resistant visor (EN166 3-F), spraygun air hose with quick release connectors, two disposable visor covers, fabric hood and neck cover, waistbelt complete (DAVW-1001), Standard airvisor 2 chemical kit complete with: acetate chemical resistant visor (EN166-3F), two disposable visor covers and neck cover, waistbelt complete (DAVW-1003), Standard airvisor 2 industrial kit complete with: polycarbonate visor (EN B), two disposable visor covers and neck cover, waistbelt complete (DAVW-1003), Airvisor 2 FV welding kit series complete with: helmet for high temperature protection, screen (90mm x 110mm), inner polycarbonate visor, fabric for face protection complete regulator with low flow alarm device and bag. Standard airvisor 2 paint spraying kit Art No Standard airvisor 2 chemical kit Art No Standard airvisor 2 industrial kit Art No Airvisor 2 FV welding kit Art No Disposable visor covers (x50) Art No Disposable visor covers (x10) Art No AIRVISOR 2 MV Airvisor 2 MV paint spraying kit complete with: acetate chemical resistant visor (EN166 3-F), spraygun air hose with quick release connectors, one fabric face seal casse te, two disposable visor covers, fabric hood and neck cover, waistbelt complete (DAVW-1001), Airvisor 2 MV chemical kit complete with: acetate chemical resistant visor (EN166 3-F) one fabric face seal cassette, two disposable visor covers, waistbelt complete (DAVW-1003), Airvisor 2 MV industrial kit complete with: polycarbonate visor (EN B). One fabric face seal cassette, two disposable visor covers and neck cover, waistbelt complete (DAVW-1003), Airvisor 2 MV Welding kit complete with: acetate chemical resistant visor (EN166 3-F), spraygun air hose with quick release connectors, one fabric face seal casse te, two disposable visor covers, fabric hood and neck cover, waistbelt complete (DAVW-1001), Airvisor 2 MV paint spraying kit Art No Airvisor 2 MV chemical kit Art No Airvisor 2 MV industrial kit Art No Airvisor 2 MV welding kit Art No Disposable visor covers (x50) Art No Disposable visor covers (x10) Art No

3 Supplied Air Air Supply / Open-circuit Breathing Apparatus CLEARFLOW 3 Filtration units for air supply: light and easy to use. Very strong structure, high filtration capacity. Can be used by up to four people or two people when using sprayguns, new single unit design. Body in aluminum, plastic and brass regulators. High efficiency coalescing filter. Large capacity activated carbon filter. Portable or wall-mounted version available. Clearflow 3, filtration unit, three elements, wall-mounted, two CEJN connections Art No CEJN connections Art No Clearflow 3, filtration unit, three elements, wall-mounted, two RBE 06 connections Art No RBE 06 connections Art No Clearflow 3 filtration unit, three elements, wall mounted, two seamless outputs. *Supplied without quick coupler Art No connectionless outputs. *Supplied without quick coupler Art No Quick coupler connector (CEJN for Airvisor) Art No Quick coupler connector (RBE 06) Art No Coalescing stage (with adapter fitting) Art No Complete activated carbon stage Art No Coalescing filter Art No Activated carbon filter Art No Clearflow 3, wall mounted, two dual action outputs Art No Clearflow 3, portable, two dual action outputs Art No DE4 Resistant four-output filtration unit for air supply devices for heavy duty use and outdoors environment. High efficiency filtration for optimum protection. Available with CEJN, RB06 or AQR06 connections. Supply pressure between 7 and 10 bars. Protection against particles equivalent effectiveness P3 odour absorption. Large capacity activated carbon filter. Honeywell DE4 (4 outputs) RBE 06 Art No Honeywell DE4 (4 outputs) AQR 06 Art No Honeywell DE 4 (4 outputs) CEJN Art No Accessories for DE4 DE4 filter set maintenance kit Art No As soon as any odour of oil is perceived in the air being breathed or when the pressure difference downstream and upstream the filters is more than one bar, it is necessary to change the set of filters on the distributor-purifier. Calculate the pressure by subtracting the pressure reading on the outlet port manometer from the pressure reading on the inlet manometer. This reading must be carried out when the devices, connected to the DE4, are discharging. In all cases it is absolutely imperative to change of filters at least once a year even when the apparatus is only operated occasionally. BLUELINE Standard air intake pipe, also available in AQR06 and RBE06 for pipes 9x16cm. For use with Airvisor 2. Blueline hose, length 3.5m or 11.5 feet with CEJN quick Art No AERIS COMFORT 2 Non-metallic back plate, ergonomic, flexible. Cushions on the straps and belts. Straps and harness made of selfextinguishing aramid material. Perfect weight distribution of the apparatus on the hips. Panoramasque full mask. Compatible with both demand positive pressure quick snap valves: - Sx-Pro activation by first breath. - Zenith automatic activation. Aeris Comfort 2 with SAD Zenith and Panoramasque full mask, five-point straps, no air cylinder Art No Aeris Comfort Type 2 with SAD Sx-Pro and Panoramasque full mask, five-point straps, no air cylinder Art No Air cylinder 6L or 1.58 US gal and 300 bars or 4,351 PSI, steel, empty* Art No Air cylinder 6.9 L or 1.82 US gal, 300 bars or 4,351 PSI, composite (20 years), empty* Art No * Can be filled on request - Other configurations available on request BIOLINE Quick and easy set up. Supply hose attached to the belt. Connects at an average pressure of 7 bar or 101 PSI. Panoramasque full mask. Zenith automatic activation positive pressure demand valve. EN 139*, EN *, EN 136 Class III Bioline on a belt with Zenith SAD, Panoramasque mask, five-point straps and CEJN connection Art No Bioline on a belt with Zenith SAD, Panoramasque mask, five-point straps and Staubli connection Art No * Other configurations available on request X-PRO Ultralight back plate. Adjustment system: - A single operation for two positions of height adjustment. - Pivot built in to adapt apparatus to all user movements. HP and MP hoses, thermo-compressed cushions, multiple anchor points for accessories and quick release buckles. X-Pro with SAD Sx-Pro and Opti-Pro full face mask, five-point straps and MP quick connection, without air tank Art No Air cylinder 6L or 1.58 US gal and 300 bar or 4,351 PSI, steel, empty* Art No Air cylinder 6.9 L or 1.82 US gal, 300 bar 4,351 PSI, Composite (20 years), empty* Art No *Can be filled upon request. Other configurations available on request. Available in ATEX version. Available in with electronic manometer. BAS Automatic switching system from the air supply network to the back-up air cylinder. High and medium (MP/HP) pressure regulator with safety valve. Integrated gauge in the cylinder valve. EN 139 & EN 402*/EN & EN 402* EN 136 Class III B.A.S. on a belt with Zenith SAD and Panoramasque mask with five-point straps and CEJN connection without air cylinder Art No B.A.S. on a belt with Zenith SAD and Panoramasque mask with five-point straps and Staubli connection without air cylinder Art No Blueline hose, length 7.5m or 24.6 feet with CEJN quick Art No Air cylinder 3L 200 bar/0.7 US gal 2,900 PSI (empty**), steel, with integrated pressure gauge - 15 minutes Art No Wall mounting with combination filter Portable with combined filter Blueline hose, length 10m or 32.8 feet with CEJN quick Art No *Depending on product configuration **Can be filled upon request - Other configurations available on request 4 5

4 Evacuation Full Face Masks BIO-S-CAPE Regulator triggered automatically upon opening of the bag. Back of the head cushion inflates automatically to keep it in place. Powerful end of supply alarm whistle. Adaptable hood. High visibility hood, resistant to moisture. Airtight, comfortable and tear-resistant neck. Breathing time is 15min. Approved temperature -30 C/ +60 C or -86 F/140 F. EN1146: 2005 SOLAS, MSC, MED and IMO Bio-S-Cape with 3L 200 bar /0.7 US gal 2,900 PSI air cylinder, steel, empty* - 15min. Art No Bio-S-Cape with 3L 200 bar /0.7 US gal 2,900 PSI air cylinder, steel, empty* - 15min. Art No AERIS MINI Light and compact. End of supply alarm whistle. Integrated gauge in the cylinder valve. Instant access to the mask. Panoramasque full mask. Positive pressure demand valve Sx-Pro. Quick release and activation. Breathing time is approximately 15min. Approved temperature -30 C/+60 C or -86 F/140 F. EN 136 Class III Aeris Mini with Sx-Pro SAD and Panoramasque full mask with five-point straps. Without air cylinder. Art No Aeris Mini with Sx-Pro SAD and Panoramasque full mask with five-point straps. With 3L 200 bar/0.7 US gal 2,900 PSI air cylinder, empty*, steel, with integrated pressure gauge - 15min. Art No OPTI-PRO Lens specially designed to facilitate downward and side vision. Impact-resistant polycarbonate lens with anti-scratch coating. Facepiece, body and high quality silicone inner half-mask. Assembly and disassembly for cleaning requires no tools. The snap on valve uses the Air-Klick system, positive pressure mask. EN136 Class III Opti-Pro five-point straps. Size M Art No PANORAMASQUE Full face mask, one size fits all. High performance EPDM (Special Polymer). Large panoramic field of view, polycarbonate lens and anti-scratch treatment (optionnal Triplex lens). The snap on valve uses the Air-Klick system. Positive pressure mask. EN136 Class III. Panoramasque mask five-point straps. Art No Wall cabinet for storing Bio-S-Cape. Art No * Can be filled on request - Other configurations available on request Air cylinder 3L 200 bar/0.7 US gal 2,900 PSI (empty*), steel, with integrated pressure gauge - 15min. Art No *Can be filled upon request. Other configurations available on request. 6 7

5 Block C, Tunney Ridge Business Park, Sam Green Road Elandsfontein, Germiston, South Africa T , F +27 (0) hseorders@hsesolutions.co.za, 8