Spreaders + Equipment

Transcription

1 Operator's Spare Parts Manual List Spreaders + Equipment

2

3 Model and serial number TYPE NO M0W >1 MW >1 MW >1 M >1 M >1 LW >1 L >1 L1 A >1

4 Table of Contents M0W Chassis... Weighing frame... Hopper with outlet shutters...1 Hopper... Transmission... Spreading system... Regulation system... MW Chassis... Weighing frame...1 Hopper with outlet shutters...1 Hopper... Transmission... Spreading system... Regulation system... M Chassis... Hopper with outlet shutters...1 Hopper... Transmission... Spreading system... Regulation system... MW Chassis... Weighing frame... Hopper with outlet shutters...1 Hopper... Transmission... Spreading system... Regulation system... M Chassis... Hopper with outlet shutters...1 Hopper... Transmission... Spreading system... Regulation system... LW Chassis... Weighing frame... Hopper with outlet shutters... Hopper... Transmission... Spreading system... Regulation system...

5 Table of Contents L Chassis... Hopper with outlet shutters... Hopper... Transmission... Spreading system... Regulation system... L1 Chassis... Hopper with outlet shutters...0 Hopper...0 Transmission... Spreading system... Regulation system... Trails M-Trail... M-Trail... L-Trail... BXL Overview... Hydraulic components...0 Notes Notes...

6 Chassis

7 Chassis Pos Qty Part no Notes Frame M0W Adjustment shaft M-line 1-0 Connection rod, big shutter 1-0 Connection rod, small shutter 0-0 Plastic bearing w/bolts - Carriage bolt Mxmm, A - Lock nut M w/nylon A - Washer,xx1,mm, A -00 Mud guard w/reflector, Dual - Reflector D R dia.0mm red - Reflector D R dia.0mm white -1 Screw Mxmm, A 1 - Nut M, A 1 0- Handwheel dia. for M nut 1- Screw Mxmm, A Guard f/disc Dual, left 1 1- Guard f/disc Dual, right Fitting for guard 1 1- Loose plate f/guard M-line 1 1- Plate Dual, left 1 1- Plate Dual, right 1-1 V-distributor Dual 1 - Flair for distributor 1 - Guideplate V-distributor left 1 - Guideplate V-distributor right -1 Nylon washer,xx1,mm 1- Button head Mxmm, A - Lock nut M w/nylon A -0 Washer,x1x1,mm, A -0 Washer,x,x1,mm, A -0 Screw Mxmm, A - Nut M, A 1- Button head Mxmm, A Blind plug f. /" tube 1 0- Sleeve for tension rod - Deflector for flush holes 1-1 Tightening left 1-1 Tightening right 1-0 PTO mm w/free wheeling Saftety guard w/fitting left Saftety guard w/fitting right 1 - Saftey guard M-line Dual left 1 - Saftey guard M-line Dual right - Support f/covering plate - Pivot mounting - Bush f. pivot mounting 0-0 Bolt Mxmm, A 1-0 Button head Mxmm, A N/A Cover H,1/D,/Ø, 0 N/A Rivet Ø,x, Pos Qty Part no Notes Fitting w/lock compl. 1 - Lock f/pipe, compl Button head Mxmm, A 1 N/A Spring,x1,x,x,V 1 - Wire net f/light L/M-line 1 - Rear lights (LED), left 1 - Rear lights (LED), right 1 - Reflector support, left 1 - Reflector support, right Reflector, left Reflector, right - Lock f/light w/spring - Light support w/bolt - LED light w/bolt 1- Button head Mxmm, A 1-0 Cap screw Mxmm A N/A Screw xmm TX, A N/A Spring 1xxmm, A - Lock spring 1,/mm Multi-tool Guard M-line Dual, left 1 - Guard M-line Dual, right Chassis N/A = Not available 0-0 0

8 Chassis

9 Chassis Pos Qty Part no Notes Frame M 1-1 Frame MW Adjustment shaft M-line 1-0 Connection rod, big shutter 1-0 Connection rod, small shutter 0-0 Plastic bearing w/bolts - Carriage bolt Mxmm, A - Lock nut M w/nylon A - Washer,xx1,mm, A -00 Mud guard w/reflector, Dual - Reflector D R dia.0mm red - Reflector D R dia.0mm white 1-1 Screw Mxmm, A 1 - Nut M, A 0- Handwheel dia. for M nut 1- Screw Mxmm, A -0 Lower link Pin, dia. x0mm Top link Pin, dia. xmm 1 - Linch Pin xmm Guard f/disc Dual, left 1 1- Guard f/disc Dual, right 1- Loose plate f/guard M-line 1 1- Plate Dual, left 1 1- Plate Dual, right 1-1 V-distributor Dual 1 - Flair for distributor 1 - Guideplate V-distributor left 1 - Guideplate V-distributor right -1 Nylon washer,xx1,mm 1- Button head Mxmm, A - Lock nut M w/nylon A -0 Washer,x1x1,mm, A -0 Washer,x,x1,mm, A -0 Screw Mxmm, A - Nut M, A 1- Button head Mxmm, A Blind plug f. /" tube 1 0- Sleeve for tension rod - Deflector for flush holes 0 - Plastic insert xxmm 1 - Plastic insert xxmm 1-1 Tightening left 1-1 Tightening right 1 - Reference spirit level kit 1 - Pin f. reference spirit level Countersunk screw Mxmm, A Countersunk screw Mxmm, A 1 - Lock nut M w/nylon A 1 - Washer,xx1mm, A PTO mm w/free wheeling Pos Qty Part no Notes Saftety guard w/fitting left 1 - Saftety guard w/fitting right 1 - Saftey guard M-line Dual left 1 - Saftey guard M-line Dual right - Support f/covering plate - Pivot mounting - Bush f. pivot mounting 0-0 Bolt Mxmm, A 1-0 Button head Mxmm, A 0 N/A Cover H,1/D,/Ø, 1 N/A Rivet Ø,x, 1 - Fitting w/lock compl. 1 - Lock f/pipe, compl Button head Mxmm, A 1 N/A Spring,x1,x,x,V 1 - Wire net f/light L/M-line 1 - Rear lights (LED), left 1 - Rear lights (LED), right 1 - Reflector support, left Reflector support, right Reflector, left 1 - Reflector, right - Lock f/light w/spring - Light support w/bolt - LED light w/bolt 1- Button head Mxmm, A 1-0 Cap screw Mxmm A N/A Screw xmm TX, A N/A Spring 1xxmm, A 0 - Lock spring 1,/mm Multi-tool 1 - Guard M-line Dual, left 1 - Guard M-line Dual, right Chassis N/A = Not available 0-0

10 Chassis

11 Chassis Pos Qty Part no Notes Frame M 1-1 Frame MW Adjustment shaft M-line 1-0 Connection rod, big shutter 1-0 Connection rod, small shutter 0-0 Plastic bearing w/bolts - Carriage bolt Mxmm, A - Lock nut M w/nylon A - Washer,xx1,mm, A -00 Mud guard w/reflector, Dual - Reflector D R dia.0mm red - Reflector D R dia.0mm white 1-1 Screw Mxmm, A 1 - Nut M, A 0- Handwheel dia. for M nut 1- Screw Mxmm, A -0 Lower link Pin, dia. x0mm Top link Pin, dia. xmm 1 - Linch Pin xmm Guard f/disc Dual, left 1 1- Guard f/disc Dual, right 1- Loose plate f/guard M-line 1 1- Plate Dual, left 1 1- Plate Dual, right 1-1 V-distributor Dual 1 - Flair for distributor 1 - Guideplate V-distributor left 1 - Guideplate V-distributor right -1 Nylon washer,xx1,mm 1- Button head Mxmm, A - Lock nut M w/nylon A -0 Washer,x1x1,mm, A -0 Washer,x,x1,mm, A -0 Screw Mxmm, A - Nut M, A 1- Button head Mxmm, A Blind plug f. /" tube 1 0- Sleeve for tension rod - Deflector for flush holes 0 - Plastic insert xxmm Reference spirit level kit 1 - Pin f. reference spirit level Countersunk screw Mxmm, A Countersunk screw Mxmm, A 1 - Lock nut M w/nylon A 1 - Washer,xx1mm, A 1-0 PTO mm w/free wheeling 1 - Saftety guard w/fitting left 1 - Saftety guard w/fitting right Saftey guard M-line Dual left Pos Qty Part no Notes Saftey guard M-line Dual right - Support f/covering plate - Pivot mounting - Bush f. pivot mounting 0-0 Bolt Mxmm, A 1-0 Button head Mxmm, A N/A Cover H,1/D,/Ø, N/A Rivet Ø,x, 1 - Fitting w/lock compl Lock f/pipe, compl. 1 1 N/A Spring,x1,x,x,V 1 1- Button head Mxmm, A 1 - Wire net f/light L/M-line 1 - Rear lights (LED), left 1 - Rear lights (LED), right 1 - Reflector support, left 1 - Reflector support, right 1 - Reflector, left 1 - Reflector, right 0 - Lock f/light w/spring 1 - Light support w/bolt - LED light w/bolt 1- Button head Mxmm, A 1-0 Cap screw Mxmm A N/A Screw xmm TX, A N/A Spring 1xxmm, A - Lock spring 1,/mm 1 - Multi-tool Chassis N/A = Not available 0-01

12 Weighing frame

13 1 Weighing frame Pos Qty Part no Notes Front frame loose M0W/MW - Spring for frame, M0W/MW - Clamp f/spring M0W/MW -0 Washer xxmm, A -00 Screw Mx0mm, kl.0 A - V-ring VA 00 - Bolt f/load cell complete - Load cell tonne w/wire - Steel nut M, A - Clamping plate f/load cell - Washer xxmm, A 1-1 Screw Mx0mm,. 1 - Support f/shield MW 1 - Steel bolt Mx0mm, A 1- Button head Mxmm, A 1 - Cover plate load cell, left 1 - Cover plate load cell, right 1 - Nut M, A 1-1 Screw Mxmm, A -1 Screw Mx0mm, A - Washer xxmm - Adjusting disc 0, mm - Adjusting disc 1,0 mm - End washer f/bearing -0 Locking ring I Ball bearing RS - Tilt part M0W/MW - Shaft for tilt part -0 Lower link Pin, Cat. 1-0 Top link Pin, cat. 1 mm - Linch Pin x0mm 1 - Pin f. reference spirit level 1 - Reference spirit level kit Countersunk screw Mxmm, A Countersunk screw Mxmm, A 1 - Washer,xx1mm, A 1 - Lock nut M w/nylon A Weighing frame N/A = Not available 0-1 0

14 Weighing frame

15 Weighing frame Pos Qty Part no Notes Front frame loose MW/MW - Spring for frame, MW/MW - Clamp f/spring MW/MW - Washer xxmm, A -1 Screw Mxmm, kl.0 A - V-ring VA 00 - Bolt f/load cell complete - Load cell tonne w/wire - Steel nut M, A - Clamping plate f/load cell 1-1 Screw Mx0mm,. - Steel bolt Mxmm, A 1 - Fitting for cover plate 1 1- Button head Mxmm, A 1 - Cover plate load cell, left 1 - Cover plate load cell, right - Nut M, A 1-1 Screw Mxmm, A 1 - Screw Mxmm, A - Washer x,xmm, A - Adjusting disc 0,mm - Adjusting disc 1mm - End washer f/bearing - Llocking ring I Ball bearing -RS - Tilt part MW/MW - Shaft for tilt part 1 - Pin f. reference spirit level 1 - Reference spirit level kit Countersunk screw Mxmm, A Countersunk screw Mxmm, A 1 - Washer,xx1mm, A 1 - Lock nut M w/nylon A Chassis Weighing frame N/A = Not available 0-0

16 Weighing frame

17 Weighing frame Pos Qty Part no Notes Front frame loose MW/MW - Friction plate for spring - Spring for frame, MW/MW - Clamp f/spring MW/MW 1 - Washer xxmm, A -1 Screw Mxmm, kl.0 A 1 - V-ring VA Bolt f/load cell complete 1 - Load cell tonne w/wire 1 - Steel nut M, A 1 - Clamping plate f/load cell 1-0 Protection sheet f/load cell Screw Mx0mm,. 1 - Washer 1xx,mm, A - Bolt Mx0,. - Nut M, A -1 Screw Mxmm, A 1 - Steel bolt Mx1mm, A 1 - Washer - Shaft for tilt part - Adjusting disc 0,mm - Adjusting disc 1mm - End washer f/bearing - Locking ring I 0-0 Ball bearing -RS - Tilt part MW/MW - Bush for shaft - Lock nut M w/nylon A 1 - Pin f. reference spirit level 1 - Reference spirit level kit Countersunk screw Mxmm, A Countersunk screw Mxmm, A 1 - Washer,xx1mm, A 1 - Lock nut M w/nylon A Weighing frame N/A = Not available 0-0

18 Hopper with outlet shutters

19 1 Hopper with outlet shutters Pos Qty Part no Notes Hopper M-line Dual -1 Lock handel, Dual - Lock nut M w/nylon A -0 Washer,x,x1,mm, A -1 Spring 1,xxmm 1- Screw Mxmm, A -0 Screw Mxmm, A - Washer,xxmm, A - Washer,xx1,mm, A - Lock nut M w/nylon A - Screw Mxmm, A - Washer,xx,mm, A 1 - Washer,xxmm, A 1 - Lock nut M w/nylon A -0 Screw Mxmm, A -01 Screw Mxmm, A - Disc for bottom plate 1 - Sliding block, PA black Turnable plate w/block Dual, L 1 - Turnable plate w/block Dual, R 1 - Shutter 1side closing cpl.dual 1 - Lochplate f/shutter M-Line 1 - Shutter kit Dual, left 1 - Shutter kit Dual, right - Sliding plate, big - Sliding plate, small 1 0- Washer 1-1 Shutter SC L cpl. 1 - Shutter SC R cpl. -0 Safety lock - Plastic hinge f/screen M-line - Hinge for screen - Stop for hinge, screen -1 Screw Mxmm, A 0- Plastic handle dia.,mm,c=m -0 Screen M-line 0-0 Relief cone M-line-EX-E-CII -0 Edge band mm M-Line yellow -1 Tightening M(W)/M(W), black Screw Mxmm, A 1 - Screen lock cpl, M-line 1 - Button head Mxmm, A 1 1- Button head Mxmm, A 1- Button head Mxmm, A - Washer xx1.mm A - Connecting rod 1-0 Screw Mxmm, A - Nut M, A - Dynamic shutter clip kit Hopper with outlet shutters N/A = Not available 0-01

20 Hopper 1 1 1

21 Hopper Pos Qty Part no Notes Hopper 0L plus M-line 1- Plastic corner/red reflector 1- Plastic corner/white reflector - Reflector red, plasticcorner - Reflector white, plasticcorner 1- Pane w/sealing -01 Support for hopper -0 Screw Mxmm, A - Washer,xxmm, A - Lock nut M w/nylon A - Washer,xx1,mm, A - Screw Mxmm, A 1-0 Tightening tape f/support Hopper N/A = Not available 0-0

22 Hopper 1

23 Hopper Pos Qty Part no Notes Hopper 0L plus M-line 1 - Hopper 10L base M-line 1- Plastic corner/red reflector 1- Plastic corner/white reflector - Reflector red, plasticcorner - Reflector white, plasticcorner 1- Pane w/sealing 1 - Pane w/pins M-base Hopper N/A = Not available 0-0

24 Transmission

25 Transmission Pos Qty Part no Notes Transmission M-line-EX Trend - Tightening ring xxmm,nbr 0-0 Ball bearing -RS 1-0 Exit shaft with right thread - Tension pin xmm - Tension pin xmm -0 Gear wheels w/pins -0 Spacer f/gear wheel 0-0 Washer -0 Countersunk screw Mx 0-0 Lid f/gear box Exit shaft w/left thread 1-0 Gear housing 1-0 Locking ring I 0-0 Screw Mxmm, A - Nut M, A -0 Bearing tube for M-line EXW EX 1-0 Exit shaft M-line 1 - Key xxmm, round -0 Spacer -0 Bronze bushing 1 - Set of gear wheels Gear housing cpl. M-Trend-line Trend transmission repair set 1-0 Shift sleeve Trend Ball bearing -RS 1-01 Drive shaft w/key and sleeve - Clutch part -edged NV Bronze bearing xx1mm 1 - O-ring,0xmm, NBR groove f/clutch 1 - Divide washer 1 - Disc washer 0xxmm 1 - Disc lock for clutch 1-0 O-ring xmm, NBR Tightening ring xxmm, NBR 1-1 Front plate f/clutch - Screw cyl.head Mxmm, A -0 Screw cyl.head Mxmm, A PTO proctection for 1 /" 1 - Counter nut M, A 1-0 Torsion spring Trend Quadro 1-0 Shaft for excentric 1 - Wave spring,x1x0,mm, K 0- Bronze bushing 1xxmm 1 - Tightening ring 1xxmm, NBR 1 - V-ring VS Locking ring U 1, A 1-0 Support for cable Shift arm f/trend Pos Qty Part no Notes Washer,xxmm, A 1 1- Screw Mx, A kl.0 - Lock spring 1,/mm 1 0- Pull rod M-line 1- Screw Mxmm, A -0 Washer,x,x1,mm, A - Lock nut M w/nylon A Shift arm 1 0- Rubberbutton, black DPU Nylon washer,xx1,mm Spring,xxmm, A Arm for spring 1 0- Guide pin for actuator 1 0- Fitting f/actuator,trend shift 1 0- U-piece with pin 1 - Actuator ZURF-ICON to-border -0 Nut M, A - Washer 1xx,mm, A -0 Screw Mxmm, A 0 - Washer,xx1,mm, A 1 - Lock nut M w/nylon A 1 1- Sensor f/trend-transmission Magnet f/sensor 1 0- Fitting for magnet 1 - Friction clutch cpl. M-L-line Countersunk screw Mxmm, A Socket set screw Mxmm, A Transmission N/A = Not available 0-0

26 Spreading system

27 Spreading system Pos Qty Part no Notes Transmission M-line-EX Trend Agitator cpl. R-side/L-thread Agitator cpl. L-side/R-thread 0- Gasket set &bearing f/agitator 0-0 Cover f/bearing housing 1-0 Agitator R-side/L 1-0 Agitator L-side/R Shaft/agitator R-side/L-thread Shaft/agitator L-side/R-thread -0 Hub f/agitator 1-1 Socket set screw Mxmm, A 0-01 Washer for agitator 1 - Tightening for agitator 1 - Countersunk screw Mxmm, A - Washer,xx1,mm, A - Nut M, A 1 0- Spread disc (L) Dual M-line Spread disc (R) Dual M-line 1-0 Tension pin x0mm - Tension pin x0mm 1-0 Hub w/tension pin, Dual 0- Lid w/lock 1 0- Vanes E1-T -1m 1 0- Vanes E-T -m 1 0- Vanes E-T -m 1 0- Vanes E-T 0-m 1-01 Fixture f/transmissionm0w/mw -01 Screw Mxmm, A 1 - Washer 1xx,mm, A - Lock nut M w/nylon A - Screw Mx0mm, A - Lock nut M w/nylon A - Washer xxmm, A Guard for safety clutch -0 Screw Mxmm, A 1-0 Socket set screw Mxmm, A 1- Sealing bowl with seal Spreading system N/A = Not available 0-01

28 Spreading system

29 Spreading system Pos Qty Part no Notes Transmission M-line-EX Trend Agitator cpl. R-side/L-thread Agitator cpl. L-side/R-thread 0- Gasket set &bearing f/agitator 0-0 Cover f/bearing housing 1-0 Agitator R-side/L 1-0 Agitator L-side/R Shaft/agitator R-side/L-thread Shaft/agitator L-side/R-thread -0 Hub f/agitator 1-1 Socket set screw Mxmm, A 0-01 Washer for agitator 1 - Tightening for agitator 1 - Countersunk screw Mxmm, A - Washer,xx1,mm, A - Nut M, A 1 0- Spread disc (L) Dual M-line Spread disc (R) Dual M-line 1-0 Tension pin x0mm - Tension pin x0mm 1-0 Hub w/tension pin, Dual 0- Lid w/lock 1 0- Vanes E1-T -1m 1 0- Vanes E-T -m 1 0- Vanes E-T -m 1 0- Vanes E-T 0-m 1-01 Fixture f/transmission -01 Screw Mxmm, A 1 - Washer 1xx,mm, A - Lock nut M w/nylon A Guard for safety clutch -0 Screw Mxmm, A 1-0 Socket set screw Mxmm, A -0 Screw Mxmm, A 1- Sealing bowl with seal Spreading system N/A = Not available 0-0 0

30 Regulation system

31 Regulation system Pos Qty Part no Notes Scale w/rivet M-line 1-0 Scale console M-line 1-1 Indicator f/scale cpl. - Wire holder type BFH.0 1- Button head Mxmm, A -0 Washer,x,x1,mm, A - Lock nut M w/nylon A 1-1 Scale for degree 1 - Degree pointer with level 1 - Level with rivet 1 - Nylon washer,xx,x1, 1-0 Washer,x1x1,mm, A Screw Mxmm, A Washer,xxmm, A 1-0 Pointer w/bearing & transfers 1 - Stickers, STD / MAX+ - Lock nut M w/nylon A 1 - Washer,xx1,mm, A 1-0 Screw Mxmm, A Connecting rod M0W/MW 1-0 Guide pin for actuator 1 1- Split bolt f/cylinder/actuator - Lock spring mm, A 1 1- Fork w/thread -0 Nut M, A - Washer 1xx,mm, A 1-1 Screw Mxmm, A 0- Handwheel dia. for M nut Socket set screw Mxmm, A 1 - Fitting for box 1 - Tarpauling for box 1 - Actuator w/wire & Dynamic plug 1 - Tarpauling for actuator LA 1 - Intelligent control - Carriage bolt Mxmm, A 1 - Plactic bearing f/pointer 1 - Dynamic plug w/wire Regulation system N/A = Not available 0-01

32 Regulation system

33 Regulation system Pos Qty Part no Notes Scale w/rivet M-line 1-0 Scale console M-line 1-1 Indicator f/scale cpl. - Wire holder type BFH.0 1- Button head Mxmm, A -0 Washer,x,x1,mm, A - Lock nut M w/nylon A 1-1 Scale for degree 1 - Degree pointer with level 1 - Level with rivet 1 - Nylon washer,xx,x1, 1-0 Washer,x1x1,mm, A Screw Mxmm, A Washer,xxmm, A 1-0 Pointer w/bearing & transfers 1 - Stickers, STD / MAX+ - Lock nut M w/nylon A 1 - Washer,xx1,mm, A 1-0 Screw Mxmm, A 1-1 Connection arm M///-W 1-1 Connection arm M/// 1-0 Guide pin for actuator 1 1- Split bolt f/cylinder/actuator - Lock spring mm, A 1 1- Fork w/thread -0 Nut M, A - Washer 1xx,mm, A 1-1 Screw Mxmm, A 0- Handwheel dia. for M nut Socket set screw Mxmm, A 1 - Fitting for box 1 - Tarpauling for box 1 - Actuator w/wire & Dynamic plug 1 - Tarpauling for actuator LA 1 - Intelligent control 1-0 Junction box 1 1- Split bolt for cylinder Hose clamp stainless MAH 1-0 Bellows black Hose clamp stainless MAH Cylinder cpl. 1-1 Spring,xxmm galv Cylinder cpl. w/spring 1 - Hydr. hose 1/" L10mm - Bonded seals gasket 1/" 1-0 Ball valve 1/" 1 0- Nipple 1/"x1/" BSP 0. Bore 1-0 Bonded seals gasket 1/" 1-0 Quick coupling 1/", male Cover for coupling 1/" Pos Qty Part no Notes Nipple 1/" BSP - Carriage bolt Mxmm, A 1 - Plactic bearing f/pointer 1 - Dynamic plug w/wire Regulation system N/A = Not available

34 M-Trail

35 M-Trail Pos Qty Part no Notes 1-0 Top link Pin, dia. xmm - Linch Pin xmm Top bar cat/ (-cm) 1- Split bolt - Lock spring mm, A 1- Bushing for link pin Support f/m-trail,m(w)-m(w) - Steel bolt Mx0mm, FZV - Lock nut M w/nylon A - Washer xxmm, A - Steel bolt Mx1mm, FZV - Screw Mxmm, A 1-0 Steel bolt Mx10mm, FZV 1-0 Washer xxmm, A - Lock nut M w/nylon A 1- Hub on shaft M/M-Trail - Shaft Q0x0 1 - Tightening ring dia. 0/1 1 - Shoulder ring 0-1 Roller bearing SKF -1 Hub housing w/bearing & bolts 0-1 Roller bearing SKF - Crown nut with flange - Hub cap dia. 0mm - Split pin x0mm -1 Hub nut M1x1,mm - Hub bolt M1x0mm - Lubricator nipple Mx1mm 1 0- Wheel 00/-,, holes,left 1 0- Wheel 00/-,,holes,right 1 1- Frame M/M-Trail 1 1- Plate for shield 1- Screw Mxmm, A 1 - Lock nut M w/nylon A -0 Washer,x,x1,mm, A -1 Screw Mxmm, A Drawbar M/M-Trail 1 0- Cover for tube 0x0xmm 1 0- Cover DPD Drawbar, T, dia.0mm hole Protection guard - Lock nut M w/nylon A - Washer,xxmm, A 0- Ball bearing YAR -RF 1 1- Spacer Splined shaft cpl. - Washer,xx1,mm, A - Set screw Mx0mm, A - Set screw Mxmm, A Supporter for trail Pos Qty Part no Notes 1-0 Split bolt for fork - Lock spring mm 1-1 PTOmm w/wide angle M-Trail 1 - Hydr. hose 1/"x00mm 1 - Extension cord rear lights Guard with bracket, L Guard with bracket, R Bracket for guard, L Bracket for guard, R 0 1- Guard 1 1- Support for guard 0-0 Bolt Mxmm, A -0 Washer,x1x1,mm, A M-Trail N/A = Not available 0-0

36 M-Trail / L-Trail

37 M-Trail / L-Trail Pos Qty Part no Notes 1-0 Top link Pin, dia. xmm - Linch Pin xmm 1 1- Tap bar Trail-carriage 1- Split bolt f/support - Lock spring mm, A 1- Bushing for link pin 1-0 Support M(W)-M(W) 1- Brace for support M/L-line -0 Screw Mxmm, A - Washer 1xx,mm, A - Lock nut M w/nylon A -0 Screw Mxmm, A 1-0 Nut M, A 1-0 Screw Mx0mm, A -0 Steel bolt Mx10mm, FZV -0 Washer xxmm, A - Lock nut M w/nylon A Adjustable hub/l-m-m-trail Tightening ring dia. 0/1 1 - Shoulder ring Roller bearing SKF 1-1 Hub housing w/bearing & bolts Roller bearing SKF 1 - Crown nut with flange 1 - Hub cap dia. 0mm 1 - Split pin x0mm -1 Hub nut M1x1,mm - Hub bolt M1x0mm 1 - Lubricator nipple Mx1mm 1 0- Wheel cpl.00/0x,/1,left 1 0- Wheel cpl.00/0x,/1,right Frame f/m-trail carriage 1 1- Extension drawbar eye Drawbar eye 0-1 Bolt Mxmm, A - Washer xxmm, A - Lock nut M w/nylon A 1 0- Supporter for trail - Washer,xxmm, A 0 - Nut M, A 1 - Washer,xx1,mm, A - Screw Mx0mm, A - Lock nut M w/nylon A -01 Protection guard 0- Flanged bearing dia. mm Splined shaft cpl. 1-1 PTOmm w/wide angle M-Trail 1-0 Late application kit L(W) 1 1- Link pin console Link pin Pos Qty Part no Notes Excentric plate 1 1- Sleeve 1 - Washer xxmm, A 1 - Lock nut M w/nylon A 1-01 Carry kit f. S/M-Trail 1-0 Support plate S -0 Clamping plate f/support -0 Brace for support S -0 Adapter for link pin 0-01 Screw Mxmm, A 1-00 Screw Mx0mm, kl.0 A M-Trail N/A = Not available 0-0 0

38 BXL

39 BXL Pos Qty Part no Notes Cylinder L-min=mm 1 - Tower for big bag lifter 1 - Shaft f/lift cylinder / 1-1 Shaft f/lift arm dia. / 1 0- Double tupe support GR. -0 Supporter for BXL 1 - Bracket for support - Split bolt f/support 1 - Shaft f/lift cylinder / - Console f. link pin, left - Console f. link pin, right - Lock plate f/link pin Lift arm complete Distance plate long, lift arm 1 - Distance plate short, lift arm - Lock nut M w/nylon A -01 Screw Mxmm, A Lift arm 1 - Washer,xxmm, A 1-01 Cylinder 0//00 dia. 1 - Extending lift arm 1 -,T hook - Shaft extendingcyl./lift hook -0 Shaft f/support roll Ø/ - Support roll f/extending 1-00 Bronze bearing /x -0 Angle connection 0 /" - Lubricator nipple Mx1mm - Case /x/" 1 - Hydr. hose /" 00mm 1 - Hydr. hose /" 0mm - Antidrop valve /" - Washer,xx1,mm, A 1 - Lock nut M w/nylon A -0 Screw Mxmm, A -0 Lower link Pin, dia. x0mm -01 Nipple /"-1/" 1 - Shock valve "Y" 0-0bar / -0 Nipple /"-/" Hydr. hose /" mm Hydr. hose /" 10mm 1 - Hydr. hose /" 10mm -0 Nipple w/nozzle 1,mm1/"x/" -0 Quick coupling 1/", male 0-1 Cover for coupling 1/" -0 Top link Pin, dia. xmm - Linch Pin xmm -0 Steel bolt Mxmm - Lock nut M, fzb 0-01 Washer xxmm Pos Qty Part no Notes 1 - Bolt Mx0mm, A 1 - Top bar - Bonded seals gasket /" -0 Bonded seals gasket 1/" 1 - Console for shock valve 1- Bolt Mx0mm, A -0 Washer,x,x1,mm, A - Lock nut M w/nylon A BXL N/A = Not available 0-1 0

40 BXL Hydraulic

41 1 BXL Hydraulic Pos Qty Part no Notes Cylinder L-min=mm 1-01 Cylinder 0//00 dia. 1 - Hydr. hose /" 00mm 1 - Hydr. hose /" 0mm -01 Nipple /"-1/" -0 Angle connection 0 /" 1 - Shock valve "Y" 0-0bar / -0 Nipple /"-/" 1 - Hydr. hose /" mm 1 - Hydr. hose /" 10mm 1 - Hydr. hose /" 10mm -0 Nipple w/nozzle 1,mm1/"x/" 1-0 Quick coupling 1/", male 1 - Case /x/" 0-1 Cover for coupling 1/" - Antidrop valve /" - Bonded seals gasket /" 1-0 Bonded seals gasket 1/" BXL Hydraulic N/A = Not available 0-0

42 L(W) Spare parts list Chassis

43 Chassis Pos. No. Order no. Notes. Pos. No. Order no. Notes L - Right 1 - LW Mx M Loc Mx Mx M Loc -0 D/ - D// 1- Mx Left 1-0 Right - D/ - Mx 1- - M 1-0 Mx Mx Lgt. mm Left -0 Right - Left - Right LW 0- LW - Left Chassis

44 00- L1base / plus Spare parts list Chassis

45 Chassis Pos. No. Order no. Notes. Pos. No. Order no. Notes D/ M - D/ 1-0 M/ Mx Mx -0 D/ - M locknut 1- Mx - M nut - Lgt. 0 mm Chassis 00--

46 LW Spare parts list Weighing frame

47 Weighing frame Pos. No. Order no. Notes. Pos. No. Order no. Notes M - -1 Mx - Mx - Mx0 - - Mx1 1 - M D/ - M D1/ - Weighing frame

48 Hopper with outlet shutters L(W) Spare parts list

49 Hopper with outlet shutters Pos. No. Order no. Notes. Pos. No. Order no. Notes Red 1- - White - M Mx D/ 1-1 Mx Big 1 - Small - Left - Right , - Øx -0 Hopper with outlet shutters

50 L1 base / plus Spare parts list Hopper with outlet shutters

51 Hopper with outlet shutters 1 Pos. No. Order no. Notes. Pos. No. Order no. Notes x1-1x 1- - Red 1- - White D/ -1 Mx Mx M locknut Mx - D/ Small Big - Left - Right -0 - øx PA D/ Hopper with outlet shutters

52 0 1 0 R L 1 Spreading system L(W) Spare parts list 00-0

53 Spreading system Pos. No. Order no. Notes. Pos. No. Order no. Notes /0 rpm 0-01 L-side/R-thread 0-0 R-side/L-thread L-side/R 0-0 R-side/L 1-0 L-side/R-thread 1-01 R-side/L-thread 1-0 Mx 1-1 Mx øxøx - M - D/ - Mx Left Right -0 øx0 - øx xx/ RS -0 Mx -0-0 Right thread - øx - øx -0 teeth Mx I 0-01 Mx - D/ - M Loc xx - / teeth Left thread 0-0 -RS M - ø,xø øxø xx -1 - Mx 0-0 Mx xx xx U M Loc -0 Mx 1-1 Mx D// 1-0 Mx D/ Mx -0 D/ - M Loc 0- E1-T Left / Right 0- E-T Left / Right 0- E-T Left / Right 0-0 U1-T Left / Right Spreading system

54 1 1 R L Spreading system L1 base / plus Spare parts list 00-1

55 Spreading system Pos. No. Order no. Notes. Pos. No. Order no. Notes /0 rpm 0-01 L-side/R-thread 0-0 R-side/L-thread L-side/R 0-0 R-side/L 1-0 L-side/R-thread 1-01 R-side/L-thread 1-0 Mx 1-1 Mx øxøx - øx0-0 øx Left Right 1 - xx 0-0 -RS - M -0 Mx -0-0 Right thread - øx - øx -0 Teeth Mx I xx - / Theeth Left thread RS M - ø,xø øxø xx -1 - Mx -0 Mx ø1xøx M Lock nut - D/ -0 Mx - 1xx - -1 U D/ 1-0 Mx 0- A T Left / Right 0-1 A T Left / Right Spreading system

56 L1, L(W) Spare parts list Regulation system

57 Regulation system Pos. No. Order no. Notes. Pos. No. Order no. Notes L 1- Mx -0 D/1 - M Loc D// M - D/ 1- Mx LW -0 L(W) -0 D/ D D Ø0, Mx 0 - M Loc 1-0 L1-0 L1 Regulation system

58 Notes

59

60 FIND MORE INFORMATION ON V0