Dixon Bayco Petroleum & Overfill 2010 catalog

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Dixon Bayco Petroleum & Overfill 2010 catalog"

Transcription

1 Dixon Bayco Petroleum & Overfill 00 catalog Distributed By:

2 Petroleum Products... - API Valves... API Caps... Gravity Drop Adapters...7 Tank Truck Gaskets...7 Drop Elbows... - Elbow Inlets... Self Lock Drop...9 Straight Drop Connectors...9 Coaxial Elbows...0 Side Seal Drop...0 Side Seal Adapter...0 Anti Spill Sleeves... Elbow Extension... Anti Spill Safety Latch... Vapor Elbows... Vapor Return Valves... Vapor Valves... Vapor Hose Couplers... Sequential Vapor Vents... Vapor Caps... Inbreathing and Outbreathing Vents... Vapor Cap... Air Interlocks... Faucet Systems and Outlets... Tanker Accessories Aluminum TTMA Weldable flanges... Aluminum TTMA Spacer... Aluminum Flanged outlet... Aluminum TTMA Reducer... Tank Truck Flanged Sight Flow Indicators...7 TTMA Series Flange Adapters...7 Dry Disconnects... - Bayonet Style Dry Disconnect... Tube Door... Aluminum Step... Aluminum Dummy Adapter... Pipe Cap... Grounding Stud... Two Way Diverting Valves... Tank Truck Equipment... Pipe Caps... Reducers... Reducing Caps... Gaskets... Intermodal Tank Truck Equipment... Stainless Steel Pipe Caps... Stainless Steel Reducers... Stainless Steel Thread Adapter... Stainless Steel Adapter... Nozzles... - Automatic Shutoff... Pressure Nozzles for Bulk... Overwing Aircraft... Large Capacity Low Pressure... Ball Nozzles for Bulk Delivery... Swivel Nut Adapters... Standard Utility... Hose Swivels... Angle Valves... Above Ground Tank Accessories...7 Auto. Pressure/Vacuum Relief...7 Standard Vent Cap...7 Table of Contents Single Action Fill Cap...7 Underground Tank Collar...7 D.O.T Push in Air Brake Tubing Roll...9 Adapter Nipple...0 Short Hex...0 Long Pipe...0 Victaulic x Weld...0 Quick Release Coupling...0 Lightweight Flexible Coupling...0 Victaulic Clamps... API Bottom Rack Loading Fittings... Swivels... Cam & Groove... - Adapters x 0# Drilling... Adapters x Round Tank Truck... Adapters with Straight Pipe... Flange Information... Overfill Products Checkmate Retain System & Accessories R/OM Retain/Overfill System & Accessories... - API Optic System & Accessories Sockets Trailer ID Module...9 Cables and Glands...9 Optic System Tester...9 FT Dummy...0 Grounding Ball/Grounding Bolt...0 API Compatible Rack Cords...0 Overfill Replacement Parts... Comparison Reference Chart... - Socket Profiles... - Petroleum Replacement Parts API Valves and Accessories Series API Bottom Load Valve API Cap Assembly Series Cap... 0 API Dust Cap... 0/0 Series Gravity Drop Adapter...9 0SG/0SG Gravity Drop Adapter Series Ring series Drop Adapter Outlet Series Faucet Valve Series Sight glass Elbow Inlet Elbow Inlet... Top "D" Handle Elbow Unit... Bottom "D" Handle Elbow Unit... Top Side Lever Elbow Unit... Bottom Side Lever Elbow Unit Top Unit... 0/0 Straight Drop Fitting Coaxial Drop Elbow with " Male Vapor Outlet SSA Series " Side Seal Adapter AS Side Seal Elbow...7 VR00 Series Vapor Elbow... VR00 Vapor Elbow...9

3 Overfi ll Products/Replacement Parts VR00 Vapor Elbow...70 VR000NP Vapor Elbow...7 Vapor Recovery VR00N Inward Opening Vapor Vent...7 VR00SQ...7 VR0Q...7 VR00/00 Outbreathing Vent...7 VRV0 Inbreathing Vent...7 VR00CS Vapor Hose Coupler...7 VR00CSNP Coupler...7 VRC000AL Hose Coupler...7 VR000 Series Vapor Hose...7 VR00 Vapor Hose Valve...7 VR00F Vapor Hose Valve...7 VR0 Vapor Adapter...7 Air Interlocks AIR Roller Ball End AIV Paddle End AI Plunger End...7 Nozzles D/DNS Bulk Delivery Nozzle...79 D/DNS Bulk Delivery Nozzle...79 DAV Aircraft Nozzle...0 D/D Auto Shutoff Bulk Delivery Nozzle... 0 Gravity/Low Pressure Nozzle Utility Nozzle... Ball Nozzles... - Swivels: Hose Shank/Check Valve AV/AV Angle Valve...7 Service Station Adapters and Caps... TL070BZ Bronze Cap... SA00AL/SA00BZ Cap... VR00 Vapor Cap... VR00PL/VR00PL-00 Cap... Dry Disconnects Cam and Groove Adapter We Commit Cam and Groove Style Coupler Actuator Style...00 Bayonet Style Adapter...0 Bayonet Style Coupler Index To ensure that internal and external customer needs are identifi ed and that our products and services meet these needs. To fully meet and exceed the requirements of the ISO 900 Quality Program. To strive for quality in each and every phase of our business. To exceed competitor s quality. To provide systems and training for all Dixon employees. To create an environment that will allow each employee to do it right the fi rst time, and accept the responsibility for quality in each and every task they perform. That no employee will ever be called on to do anything morally, legally or ethically wrong. pages - pages 7- pages -0 Bayco Petroleum Products Petroleum Replacement Parts Product Changes and Corrections Dixon has gone to considerable effort to ensure the accuracy of the information provided. Please report any irregularities found for clarifi cation or correction. Dixon reserves the right to modify or change product specifi cation or to withdraw product offerings at any time without prior notice. pages 0- Index Dixon Bayco

4 Safety Vapor Vents VRV0 VRP00 Vapor Vent Hood TDF Tube Doors TDF7 TDF VR00 VR0 Ladderstep S Elbow Extension Kits Grounding Stud GS GS FUEL Vapor Couplers VR00 Vapor Valves Load Only 0L VRC000 VR00CS Vapor Caps VR000 VR00 VR00F API s VAPOR Vapor Elbows VR00PL VR00 Vapor Adapter VR0 Load/Unload 0 Vapor Caps 0SFI VR00 VR00 VR00 VR00PL VAPOR From Underground Tank 00SFI Dixon Bayco 00

5 FloTech brand Products Petroleum Tanker Products Bayco brand products are engineered for dependable, long service life and designed for easy, low cost maintenance. Where possible, modular systems are incorporated with common parts to minimize inventory of repair items. Air Interlocks 000AIV 000AIR 000AI Aluminum TTMA Flanges TTFAL TTFAL FG0 TTMA Round Flange Gaskets FUEL API Cap Assembly 00 Series Drop Adapters Dust Cap ASSM 0SG FUEL Elbow Inlets (000 Series) FUEL Drop Elbows Co-Axial Elbow (Vapor Outlet) Female Male 000AS 00 0/0 00A 00/F FUEL 0/F Top Seal Adapters Locking Fill Caps Standard " BZ0 Short " BZ0S FUEL To Underground Tank SA00 TL070BZ Dixon Bayco

6 Dixon Bayco Fuel Compatibility Chart Dixon Bayco Product 00 Series 00V Series 0, 0 0V, 0V 0SG 0SGV 00SFI, 00SFI- 00SFIV, 00SFIV- 0 0SFI 0C 0L 0LNG 0NG 0NGC 0NGV 0NGVC 0SNG two piece API drop adapter with sight glass, Baylast seals two piece API drop adapter with sight glass, Viton seals API drop adapter without sight glass, Baylast seals API drop adapter without sight glass, Viton seals one piece API drop adapter with sight glass, Baylast seals one piece API drop adapter with sight glass, Viton seals TTMA fl anged sight glass with Baylast seals TTMA fl anged sight glass with Viton seals API valve with sight glass, Baylast seals API valve with inline tube sight glass, Baylast seals API valve with sight glass and removable handle, Baylast seals (Canada) API load only valve with sight glass, Baylast seals API load only valve without sight glass, Baylast seals API valve without sight glass, Baylast seals API valve without sight glass, with removable handle, Baylast seals (Canada) API valve without sight glass, Viton seals API valve without sight glass, with removable handle,viton seals (Canada) API valve without sight glass, Baylast seals, stainless spring Fuel Product Crude Gasoline Diesel ULSD E0 E0 E E00 B B0 B00 Oil 0SNGC 0TNG 0TNGC 000, 00 and 00 Series Drop Elbows Vapor or Product Hose Couplings Vapor or Product Hose Couplings VR000 and VR00 Series Vapor Valves VR000, VR00, VR00 and VR00 Vapor Elbows VR00SQ, VR0SQ VR00V, VR00SQV and VR0SQV 00GTTFCB, 00GTTFCB 00GTTFK 0TF, 0TF, 0TF FT, FT0, FT0 FTS, FT0S, FT0S API valve without sight glass, with removable handle, Baylast seals, stainless spring (Canada) API valve without sight glass, Tefl on seals API valve without sight glass, with removable handle, Tefl on seals (Canada) petroleum drop elbows and inlets, Buna seals petroleum vapor hose couplings, Buna seals petroleum vapor hose couplings, Viton seals petroleum vapor valves, Baylast seals petroleum vapor elbows and inlets, Baylast seals sequential vapor vent valves, Baylast seals sequential vapor vent valves, Viton seals cork Buna TTMA gasket Klinger style TTMA gasket Tefl on soft core TTMA gasket FloTech sensors FloTech stainless steel sensors Notes: not applicable (this product is not used in this application) not recommended not recommended cost and tendency for Tefl on to become damaged from particulate material is not justifi ed for this application. not recommended crude oil contains acids that are corrosive to steel parts. Petroleum companies often put additives in fuels, additives can affect compatibility with fi ttings and seals. Please contact Dixon for more information. Viton GFLT is compatible with all liquids listed above and available from Dixon by special quote. Baylast is a proprietary seal compound from Dixon. REV E September, Dixon Bayco 00

7 Dixon Bayco Bottom Loading, Gasket and Seal Recommendations For Alternative Fuels Dixon Bayco completed several years of testing and engineering evaluation to ensure our products are compatible with all modern motor fuels in use today. Dixon Bayco uses a proprietary seal compound that we refer to by the trade name BAYLAST, BAYLAST has been tested both in the lab and fi eld with excellent results. BAYLAST was developed so we could offer a single seal material compatible with the wide range of alternative fuels used today. For the past year, many Dixon Bayco products have been using BAYLAST seals to ensure compatibility with alternate fuels including E00 Ethanol, E Ethanol, B Biodiesel, B0 Biodiesel, Ultra Low Sulfur Diesel, and standard refi ned gasoline and diesel products with excellent results. Our tests indicate that BAYLAST performs well down to -0 F/C. There are mechanical and temperature considerations that must be understood to determine which seal material is suitable for a specific application. A good example is Teflon, it has a very wide chemical compatibility range but is a poor seal material for mechanical reasons. Using Viton B, or Viton GF is one solution to ensure compatibility, but Viton has limitations regarding mechanical suitability for seal applications with moving joints. One critical and well known limitation to Viton is cold temperature. Viton will become hard at low temperatures and seals with moving parts tend to weep liquid. On the opposing page is our fuel compatibility chart which outlines our recommendation for each Dixon Bayco product and type of fuel. Should you have any questions or need additional technical support, please call Dixon Bayco at: SuperTanker Program The Supertanker package from Betts and Dixon Bayco has all the reliable, high performance, bottom loading equipment you want plus something you really need. A three year warranty that covers materials and workmanship on all components installed on your new tanker as shown on our supertanker selection check list below. From the "overfi ll system" to the manholes and every valve, vent, adapter, gravity coupler and dust cap. The only exceptions are seals and wear surfaces, where life expectancy is highly dependant on material being hauled. And there is more with Supertanker, you get a level of service our competitor s simply can not match. If there is a concern with your new bottom loading system, call us and we will look after it, period! We will come on-site if needed to solve any problems. And you will always have access to our experienced engineering team staffed with tanker experts. We ll even help with competitor s systems. Our goal is your satisfaction. Call your Betts or Dixon Bayco representative today, or visit us online at Just check off the equipment you need and tell your tank builder you want Supertanker. Want the World s Best Bottom Loading Package? Check This Out... Betts and Dixon Bayco -year warranty on complete system genuine Betts manholes and emergency valves proven most reliable Flotech Overfi ll detection patented Dixon Bayco high-fl ow API valve patented Flotech, easy maintenance dual socket assembly highest fl ow vapor vents from Dixon Bayco genuine Betts internal valves with Tefl on seals system components specifi cally designed to work together complete air operated valve system corrosion resistant Dixon Bayco interlocks low-weight Dixon Bayco dust caps and gravity couplers both Betts and Dixon Bayco are widely accepted by fl eets and OEM s Now you do not have to sacrifi ce the high-performance bottom loading system you really want just to get the convenience of an easy-to-specify package. Dixon Bayco

8 Index Replacement Parts FloTech Overfill Products Bayco Petroleum Products Petroleum Products " API Valves API Valves are used for bottom loading and unloading of petroleum tankers. Valve nose shape and opening comply with American Petroleum Institute standard (API RP-00) enabling Dixon s API valves to interchange with competitor items made to the same specifi cation. Two styles are available: a load model without handle and, a load/unload model with a handle to allow manual opening. unique fl ow and fl uid level sight indicator are available load/unload versions feature an ergonomically curved handle that opens with a short stroke, can be ordered with a fi xed or removable handle chemical resistant crank seals and poppet seal (Tefl on seals optional) any required maintenance is simplifi ed, can be completely rebuilt without removing the valve from the tank the ALH (anodized aluminum hard coat) nose ring can be rotated to provide a fresh cam service see page 7 for tank truck flange gaskets aluminum ergonomic handle 0NG approved for use in the following service: gasoline, diesel, E0 0% ethanol, E % ethanol, E00 00% ethanol, B % bio-diesel/diesel, B0 0% bio-diesel/diesel 0NG tested performance to -0 F/C with 00% ethanol, B % bio-diesel and B0 0% bio-diesel 0NGV approved for use in the following service: B00 00% bio-diesel API Load/Unload Valve 0NG fi xed handle, without sight glass, ALH nose ring, Baylast seal 0 fi xed handle, sight glass, ALH nose ring, Baylast seal 0C removable handle, sight glass, ALH nose ring, Baylast 0 seal 0NGC removable handle, without sight glass, ALH nose ring, Baylast seal 0SFI 0L SNG 0TNG 0NGV 0SFI API Dust Caps fi xed handle, without sight glass, ALH nose ring, stainless steel spring for crude oil, Baylast seal fi xed handle, without sight glass, ALH nose ring, Tefl on seals fi xed handle, without sight glass, Viton seals fi xed handle, with inline full body sight glass, ALH nose ring, Baylast seal removable handle for Canadian market API Load Only Valve 0L load only API valve with sight glass, ALH nose ring 0LNG load only API valve without sight glass, ALH nose ring * Note: Please reference pages and 7 for repair kits and replacement parts. 0-DCAL aluminum API cap with fl at gasket 000- nylon API cap with fl at gasket, pad lockable arm 0 aluminum API cap with quick release arm and chain 000- aluminum API cap with O-ring seal * Note: Please reference pages for repair kits and replacement parts Dixon Bayco 00

9 Petroleum Products Gravity Drop Adapters Gravity drop adapters attach and seal directly against openable API s and allow drop hose with standard cam and groove couplers to clamp on and transfer petroleum from the API. Dixon manufactures two styles of gravity drop adapters; a standard one-piece and a two-piece bolt together design with sight glass. Both are Dixon quality cast construction with bronze cam arms and Buna O-ring seals (Viton O-rings available upon request). Standard One Piece Body quality cast aluminum body with inside lip to hang on API while clamping inexpensive replacement of Buna seal (Viton seal available) bronze cam arms with stainless steel pins and fi nger rings 0 API " drop adapter 0SG API " drop adapter with inline sight glass and fl at gasket 0 0SG 0SGV API " drop adapter with inline sight glass and fl at gasket Viton 0 API " drop adapter 0V API " drop adapter with Viton gasket 0SG API " drop adapter with inline sight glass and fl at gasket 0SGV API " drop adapter with inline sight glass and fl at gasket Viton 0-AL API " drop adapter with fl at gasket 0-AL API " drop adapter with fl at gasket * Note: Please reference pages 9 for repair kits & SEALBU replacement fl at gasket for 0, 0 and 0 replacement parts. Two Piece Design with Sight Glass Bayco brand two-piece gravity drop adapter system consists of a 00 ring assembly and an outlet which contains mounting bolts, sight glass and seals. Customer assembly required (see sketch). Order ring and outlets separately. Note: Order 00 ring and outlets separately. All outlets include sight glass, seals and mounting bolts. Bayco Petroleum Products FloTech Overfill Products 0ASSM 0, 0SPECIAL Sketch showing assembly of piece drop adapter 00 ring only 00V with Viton ring 0 " male x " TTMA flange x ½ 0V with Viton gaskets 0 " male x " TTMA flange x ½ 0V with Viton gaskets 0 " male x " TTMA flange straight 0V with Viton gaskets 0SPECIAL " male x " TTMA flange straight, no sight glass 0 " female x " TTMA flange x ½ coupler 0V with Viton gaskets 0ASSM API drop adapter outlet, " x " x straight adapter, sight glass, buna seals (00 + 0) 0ASSM API drop adapter outlet, " x " x ½ coupler, sight glass, buna seals (00 + 0) * Note: Please reference page 0 for repair kits and replacement parts. Tank Truck Gaskets Size OD ID Thickness 0TF 00GTTFCB 0TF 00GTTFCB 0TF " " " " " Tefl on with soft fi ber core cork / Buna Tefl on with soft fi ber core cork / Buna API sump gasket, Tefl on with soft fi ber core -7/" -/" -7/" -/" -/" 00 0, 0 -/" -/" -9/" -9/" -9/" /" /" /" /" /" 0 Replacement Parts Index Dixon Bayco

10 Petroleum Products Index Replacement Parts FloTech Overfill Products Bayco Petroleum Products Drop Elbows and Accessories Drop elbows connect to the underground tank fi ll collar on one end and to the tanker drop hose at the other. They allow convenient hose connection and prevent hose damage due to kinks. Bayco brand elbows are built tough for consistent positive locking using solid bronze arms with modular construction for easy, low cost maintenance. Locking mechanisms, cam arms and bottom assemblies are interchangeable. 'A' 'B' 00 series 00X " Drop Elbows comes with acrylic sight glass and Buna seals for sight glass bolt-on inlets for easy replacement solid bronze locking arms housed in polymer bushings provide the best bite of any elbows in the market lubrication fi tting for locking stem, stem made of stainless steel modular quality cast aluminum construction fi eld repair and upgrade are made simple due to modular design factory direct * Note: Please reference page for repair kits and replacement parts. Elbow Options 000EXT: Extension Kit (page ) provides extra height for deep fi ll boxes, kit increases elbow ground clearance by approximately ". Can be used with all standard height 000/00/00 series drop elbows. 00SLK: Safety Latch Kit (page ) locks the side lever of the 00/00 series elbows. 00-7: for standard height 000/00/00 series elbows with anti spill sleeve kit (page ) 00X-7: Anti Spill Sleeve Kit for tall 00/00 series elbows (page ) 000F: Inline strainer for drop elbows female 'A' male 'B' 'A' Overall Height 'B' Ground Clearance 00 00A 00AT 00B 00C 00D 00RH 00RHA 00T 00X 00XA 00XAT 00XB 00XC 00XD 00XT elbow only, without inlet connection elbow with " adapter inlet elbow with " adapter inlet and anti-spill sleeve elbow with " coupler inlet elbow with " adapter inlet elbow with " coupler inlet elbow only, right side lever without inlet connection elbow with right side lever with " adapter inlet elbow with anti-spill sleeve without inlet connection tall elbow only, without inlet connection tall elbow with " adapter inlet tall elbow with " adapter inlet and anti-spill sleeve tall elbow with " coupler inlet tall elbow with " adapter inlet tall elbow with " coupler inlet tall elbow with anti-spill sleeve without inlet connection female Elbow Inlets for 000, 000AS, 00, 00 elbows bolt-on easy to install/replace aluminum bodies with bronze cam arms comes with stainless steel cap screws () VR000-7-/" 7-/" 7-/" 7-/" 7-/" 7-/" 7-/" 7-/" 7-/" " " " " " " " " coupler inlet " coupler inlet " adapter inlet " adapter inlet " FNPT inlet " adapter outlet for vapor elbows 0-7/" 0-7/" 0-7/" 0-7/" 0-7/" 0-7/" 0-7/" 0-7/" 0-7/" -/" -/" -/" -/" -/" -/" -/" Dixon Bayco 00

11 arm design increases the strength of the locking arm components Arm hinge points use a double yoke designed to increase strength. There are no side bolts or casting bosses to break. No need for the operator to engage or set the locking mechanism, the 00 series automatically locks the arm onto the fi ll adapter when the arm is rotated into the locking position. Ergonomic arm design contains a lock release lever that the operator can engage or disengage by simply gripping the locking arm. Since the locking mechanism is tucked inside the locking arm it can not be accidentally released. Self-locking arm prevents the elbow from popping off due to a hydraulic surge when the underground storage tank overfi ll valve slams shut. easy to service - all gaskets and repair parts are common to the product line handle can be mounted to left or right side of elbow 00 00A 00B 00C 00D 00X 00XA 00XB 00XC 00XD 00T 00AT 00BT 00CT 00DT 00XT 00XAT 00XBT 00XCT 00XDT factory direct Petroleum Products Self-Locking Drop Elbows elbow only, locking handle, without inlet connection elbow with locking handle and " adapter inlet elbow with locking handle and " coupler inlet elbow with locking handle and " adapter inlet elbow with locking handle and " coupler inlet tall elbow only, locking handle, without inlet connection tall elbow with locking handle and " adapter inlet tall elbow with locking handle and " coupler inlet tall elbow with locking handle and " adapter inlet tall elbow with locking handle and " coupler inlet elbow with locking handle and anti-spill sleeve without inlet connection elbow with locking handle, " adapter inlet and anti-spill sleeve elbow with locking handle, " coupler inlet and anti-spill sleeve elbow with locking handle, " adapter inlet and anti-spill sleeve elbow with locking handle, " coupler inlet and anti-spill sleeve tall elbow with locking handle and anti-spill sleeve without inlet connection tall elbow with locking handle, " adapter inlet and anti-spill sleeve tall elbow with locking handle, " coupler inlet and anti-spill sleeve tall elbow with locking handle, " adapter inlet and anti-spill sleeve tall elbow with locking handle, " coupler inlet and anti-spill sleeve * Note: Please reference page and for repair kits and replacement parts. for use with unusually deep fi ll boxes where standard elbows cannot be attached D handle operation welded construction of top section available with " or " inlets 0 0 0NPT 0NPT " adapter inlet " adapter inlet " male NPT inlet " male NPT inlet Straight Drop Connectors ] 'A' 'B' 00XA 'A' 'B' 'A' Overall Height 7-/" 7-/" 7-/" 7-/" 7-/" " " " " " 7-/" 7-/" 7-/" 7-/" 7-/" " " " " " 00A 'B' Ground Clearance 0-7/" 0-7/" 0-7/" 0-7/" 0-7/" -/" -/" -/" -/" -/" 0-7/" 0-7/" 0-7/" 0-7/" 0-7/" -/" -/" -/" -/" -/" Bayco Petroleum Products FloTech Overfill Products Replacement Parts Index * Note: Please reference pages and for repair kits and replacement parts. Dixon Bayco

12 Index Replacement Parts FloTech Overfill Products Bayco Petroleum Products -/" (00) -/" (00X) -/" (00) -" (00x) * Note: Please reference page for repair kits and replacement parts. Petroleum Products Coaxial Elbows Side Seal Drop Elbows for single point vapor recovery only " male vapor outlet (top) Comes assembled with choice of " or " adapter or coupler inlets. Note: 00 series coaxial inlets will not fi t our other elbow series, please see page for inlets. quality cast aluminum construction with solid bronze arms bolt-on inlets/outlets for easy, fast replacement acrylic sight glass with Buna seals 00EXT Kit (page ) raises elbow clearance an additional " to approximately ¾" when extra height for deep fi ll boxes is required. 00 Series Coaxial Elbow Inlets 00 00F 00L 00FL 0 0L 0F 0FL 00X 00XF 00XFL 00XL 0X 0XF 000-C 000-C 000-C 000-7C factory direct Side Seal Adapter allows conventional top seal elbows to be used with side seal style fi ll collars bottom connects to side seal collar/top section accepts standard " top seal elbows elbow with " adapter inlet elbow with " coupler inlet elbow with " adapter inlet and safety latch elbow with " coupler inlet and safety latch elbow with " adapter inlet elbow with " adapter inlet and safety latch elbow with " coupler inlet elbow with " coupler inlet and safety latch tall elbow with " adapter inlet tall elbow with " coupler inlet tall elbow with " coupler inlet and safety latch tall elbow with " adapter inlet and safety latch tall elbow with " adapter inlet tall elbow with " coupler inlet " coupler inlet, only for 00 series elbow " coupler inlet, only for 00 series elbow " adapter inlet, only for 00 series elbow " adapter inlet, only for 00 series elbow for use with special " side seal style fi ll collars only modular, easy repair, bolt-on construction comes with acrylic sight glass, Buna seals and bronze arms choice of " or " inlets available with anti-spill sleeve (locking ring is available) 000AS 000ASA 000ASAT 000ASB 000ASC 000ASD 000ASAL 000ASR 000AST 000AS without inlet connection 000AS with " adapter inlet 000AS with " adapter inlet and anti-spill tube 000AS with " coupler inlet 000AS with " adapter inlet 000AS with " coupler inlet 000ASA with locking ring locking ring kit 000AS with anti-spill sleeve factory direct * Note: Please reference page 7 for repair kits and replacement parts. 000-SSA side seal adapter * Note: Please reference page 7 for repair kits and replacement parts. Dixon Bayco 00

13 designed for 000, 00 and 00 top seal elbows consists of aluminum sleeve () and seal () which fi ts inside bottom assembly of elbow allows fuel to bypass and exit below the underground tank collar/elbow seal interface, preventing leakage or spill should problems with sealing or lock-up occur 00-7 for standard height 000/00/00 series elbows 00X-7 for tall 00/00 series elbows Anti-spill sleeve can be purchased already assembled within elbows X-7 anti-spill sleeve for standard height 000/00/00 series elbows anti-spill sleeve for tall height 00/00 series elbows Spacer kits raise Bayco brand elbow clearance by " for customers requiring additional height to clear deep fi ll boxes (for 000/00/00/00/VR000/VR00 standard height elbows). requires assembly to elbow kit comes with cast aluminum spacer, linking extension hardware and installation instructions Petroleum Products Anti Spill Sleeves Elbow Extension Kits Sketch of 00-7 sleeve includes:. O-ring. aluminum sleeve Note: Sleeve allows liquid to bypass main gasket/ underground tank adapter interface. Bayco Petroleum Products FloTech Overfill Products Note: 00 extension kit includes replacement vapor tube, not shown in photo. 000EXT 00EXT for 000/00/00/VR000/VR00/VR00 elbows for 00 co-axial elbow prevents accidental spills by locking 00/VR00 series elbows or 00 series co-axials to underground tank collar available as retro fi t kit or assembled on elbows (pictured) kit includes bronze safety latch, hardware and assembly instructions simple, reliable locking and quick release unlocking requires assembly to elbows 00SLK Anti-Spill Safety Latch spacer kits shown assembled to elbows Replacement Parts Index Dixon Bayco

14 Petroleum Products Index Replacement Parts FloTech Overfill Products Bayco Petroleum Products Vapor Recovery Products Bayco brand petroleum tanker vapor return products are designed for interchangeability with competitor products and built to the highest quality standards for trouble-free service. They allow transfer of underground storage tank vapor to the tanker compartments during the off-loading of petroleum VR000NP VR00 VR00 VR00 Vapor Elbows for use in two point vapor recovery systems choice of models with probe, with & without poppet and with or without adapter outlet one piece bronze locking arms housed in polymer bushings advanced design side lever locking system Buna seals and stainless steel hardware bolt on " male outlet included (can rotate for extended life) Use VR000- as a replacement " adapter for VR00 model VR00, VR000, and VR00 shares a common bottom end with other vapor elbows lubrication fi tting on locking stem Note: See 00 drop elbow (page 0) for single point vapor recovery coaxial elbow. VR000NP VR00 VR00NP VR00 VR00ANP VR00L VR00LNP VR00LPNP VR00NP VR00NPB VR00NPBP VR00NPBU VR00NPDP VR00PNP VR00 VR00NP VR00LPNP VR000 elbow with adapter outlet, D-type handle, no poppet valve VR00 with " adapter outlet, push-on style, includes outlet poppet valve VR00 with " adapter outlet, push-on style, without outlet poppet valve VR00 elbow with " adapter outlet, outlet poppet valve VR00 with " adapter without poppet VR00 with safety latch, " adapter outlet & poppet valve VR00 with safety latch, " adapter outlet without poppet valve VR00 with safety latch kit and extension, " adapter outlet without poppet valve VR00 with " adapter outlet without poppet valve VR00 with " coupler outlet, no outlet poppet valve VR00 with " coupler outlet and extension kit assembled, not outlet poppet valve VR00 elbow only, without " adapter outlet, without poppet valve VR00 with " coupler outlet and extension kit assembled, no outlet poppet valve VR00 with " adapter outlet, no outlet poppet valve with extension kit VR00 elbow with " adapter outlet, includes outlet poppet valve VR00 elbow with " adapter outlet, without outlet poppet valve VR00 with safety latch, " adapter outlet without poppet valve & extension kit assembled factory direct Elbow inlets can be found on page * Note: Please reference pages, 9, 70 and 7 for repair kits and replacement parts Dixon Bayco 00

15 Petroleum Products VR00 VR00NP VR00 VR00NP VR00NPS VR00S VR00F VR00FNG VR00F-NGNP Vapor Valves bulb designed for maximum vapor fl ow (low resistance) for fast loading of tankers with angled acrylic sight glasses () and drain plug, allows viewing and drainage of fl uids if in system quality cast aluminum construction " adapter with poppet valve x " round TTMA fl ange connection with air interlock mount (use air interlock 000AIV if required) see page 7 for tank truck gaskets VR000 * Note: Please reference page 7 for replacement parts. Vapor Return Valves allows easy seal replacement while still on tanker heavy duty cast aluminum body " adapter with or without poppet valve, FNPS, FNPT or round TTMA connection with air interlock mount (use air interlock 000AI if required) " adapter x female NPT with poppet valve " adapter x female NPT without poppet valve " adapter x " female NPT with poppet valve " adapter x " female NPT without poppet valve " adapter x " female NPS without poppet valve " adapter x " female NPS with poppet valve " adapter x " round TTMA flange with poppet valve & sight glass " adapter x " round TTMA fl ange with poppet valve, without sight glass " adapter x " round TTMA fl ange without poppet valve, without sight glass * Note: Please reference page 7 and 7 for replacement parts. for use with vapor hose cast aluminum body Buna gasket VRC000AL 00-CVR-AL 00-CVR-AL VR00CS-AL VR00CS-NP 00-DAVR-AL 00-DVR-AL 00-DVR-AL 00-DDVR-AL has Viton poppet seal " coupler with probe x " hose shank " coupler with probe x " hose shank " coupler with probe x " hose shank " coupler with poppet and probe x " hose shank " coupler with probe x " hose shank " coupler with probe x " adapter " coupler with probe x " female NPT " coupler with probe x " female NPT " coupler with probe x " coupler with probe Vapor Hose Couplers VRC000AL VR000 VR00 VR00 VR00F VR00CS-AL Bayco Petroleum Products FloTech Overfill Products Replacement Parts Index * Note: Please reference page 7 for replacement parts. Dixon Bayco

16 Petroleum Products Index Replacement Parts FloTech Overfill Products Bayco Petroleum Products VR00SQ (") VR0SQ (0") 09AL Sequential Vapor Vents Inbreathing and Outbreathing Vents VRP00 VRV0 Vapor Caps Sequential vapor vents are used for venting tank vapors during the bottom loading and unloading of petroleum tankers. These pneumatically activated vapor vents can either be installed to open in a sequence or to open independently in either " or 0" tank manholes. VR00SQ VR0SQ 09AL centered T handle for one handed ease of use and a solid locking mechanism strong and lightweight built-in locking feature corrosion resistant materials color coded safety orange for vapor service manufactured with a hole for a chain / lanyard VR00PL VR00PLC VR00PLRK VR00AL VR00ALC 00-G-BU for " manhole, mounting ring attachment for 0" manhole, " TTMA flange attachment VR0 adapter fl ange for Parker style vents * Note: Please reference page 7 for repair kits and replacement parts. Installed in vapor plumbing as a safety device to relieve pressure or vacuum build up when vapor system is blocked during loading/unloading. " TTMA fl ange mounting (aluminum) stainless steel shaft and Buna seals see page 7 for tank truck gaskets VRP00 outbreathing vent for MC0 (opens at no greater than PSI pressure) VRP00 outbreathing vent for D0T0 (opens at no less than PSI pressure) VRV0 inbreathing vent (opens at." Hg vacuum) * Note: Please reference page 7 for replacement parts. Nylon ultra lightweight nylon cap ultra lightweight nylon cap with chain replacement gasket for VR00PL Aluminum aluminum cap aluminum cap with chain replacement gasket for VR00AL * Note: Please reference page for repair kits and replacement parts. Dixon Bayco 00

17 Petroleum Products " Tanker Faucets Tanker faucets are dependable valves used for tanker gravity offl oading of petroleum or other products. The system consists of: a main body with handle activated fl apper valve, a choice of bolt-on sight glass outlets and a reducing fl ange, if required. Faucet system includes main body, choice of outlets with sight glass and reducing fl ange (order each separately). aluminum main body with " TTMA mounting fl ange and bronze handle operating internal fl apper Body includes spring loaded fl apper valve with Viton seal and " square outlet fl ange. reducing fl ange (" TTMA to " TTMA) allows main body to bolt to " TTMA fl ange. Bronze handle included when ordering main body. 00 main body (includes handle) reducing fl ange Order main body, outlet and reducing fl ange separately. See below for available outlets see page 7 for tank truck gaskets square fl anged for mounting to 00 body comes with acrylic sight glass, two Buna seals and four stainless steel mounting bolts cast aluminum body construction choice of four adapters / couplers shown 0 0A 0S 0- " x ½ adapter " x ½ adapter " straight adapter " x ½ coupler * Note: Please reference page for repair kits & replacement parts. mounts to API s, vapor valves and safety bars rugged solid Bayloy body for dependable service and superior corrosion resistance. choice of standard piston end or paddle end (for bulb style vapor valve) adjustable stroke to accommodate length variations includes ¼" x ¾" stainless steel mounting bolts 000AI 000AIV 000AIR 000AIS 000AIST 000S 000ST Faucet Systems 0A outlet Faucet Outlets Air Interlocks standard " button plunger pneumatic interlock paddle plunger pneumatic interlock, for use with VR000 vapor valve roller ball plunger pneumatic interlock, ideal for use on cabinet doors standard " button plunger pneumatic interlock with electronic switch, ideal for connecting to electronic overfi ll systems ½" button plunger pneumatic interlock electronic switch kit, for adding electronic switching to Bayco brand pneumatic interlock valves replacement ½" large button 0 0S 0-000AIV 000AIS 00 main body reducing fl ange 0A 000AIR 000AI Bayco Petroleum Products FloTech Overfill Products Replacement Parts Index * Note: Please reference pages 77 and 7 for repair kits and replacement parts. Dixon Bayco

18 Index Replacement Parts FloTech Overfill Products Bayco Petroleum Products Petroleum Products Tanker Accessories Illustrated and described below are Bayco brand accessories for use with petroleum tankers. All are quality built for dependable long life service. Aluminum TTMA Weldable Flanges for welding to " and " TTMA aluminum pipe standard " and " TTMA bolt pattern side A, I.D. beveled to aid welding side B, machined surface for gasket seal " TTFAL bolt circle diameter is.7"; " TTFAL bolt circle diameter is.7" see page 7 for tank truck gaskets TTFAL TTFAL Aluminum TTMA Butterfly Spacer API Flanged Outlets with Sight Glass Note: Dixon Bayco does not offer " butterfl y valves, for illustration purposes only SPECIAL 0 Aluminum TTMA " to " Reducing Flange " weldable flange " weldable flange special fl ange for sight glass installation allows Bayco brand series 00 drop adapter outlets (with sight glass) to be used with " butterfl y valves (not supplied by Dixon) all surfaces machined standard " TTMA bolt pattern see page 7 for tank truck gaskets FG0 " TTMA spacer " male x " TTMA flange x ½ " male x " TTMA flange x ½ " male x " TTMA flange straight " male x " TTMA flange straight, no sight glass " female x " TTMA flange x ½ coupler * Note: Please reference page 0 for repair kits and replacement parts. allows bolting of " TTMA flanged product to " TTMA fl anged product " TTMA hole pattern (), /" socket head cap screws " TTMA blind hole pattern (), /" NC thread x 9/" deep all surfaces machined see page 7 for tank truck gaskets Dixon Bayco 00

19 Petroleum Products Tank Truck Flanged Sight Flow Indicators Rugged aluminum construction is more durable than the single piece acrylic doughnut commonly used. The cast aluminum design is suited to rough over the road trucking and load rack service. Replacement sight glass is a fraction of the cost of the one-piece design. Rated for 0 PSI hydrostatic pressure at 70 F. The " size Has large -/" ID for use with tank truck fl anged butterfl y valves. Designed to be a drop in replacement for the one-piece acrylic sight glass used behind the API load head strong and lightweight allows for visual identifi cation of the fuel grade prior to opening the valve works with tank truck flanged butterfl y valves found on gasoline tankers ¾" width replaces acrylic doughnut sightglass Flange gaskets are no longer supplied, a retaining ring and machined lip hold the acrylic tube in place. 00-SFI 00-SFI- " TTMA pattern fl anged short sight fl ow indicator " TTMA pattern fl anged short sight fl ow indicator * Note: Please reference page for repair kits and replacement parts. allows for visual identifi cation of the fuel grade prior to opening the valve works with tank truck flanged butterfl y valves found on gasoline trucks larger ID allows tank truck fl anged butterfl y valves to connect to either end of the 0-SFI ¼" width 0-SFI " sight fl ow indicator 0-SFI-RK replacement O-rings, glass, retaining ring for 0-SFI-RK Note: For tank truck flange gaskets see page 7 Replacement Parts TTMA Series Flange Adapters The TTMA pattern bolts quickly and easily to round " TTMA flanges and provides a " or " male or female NPT thread. Adapter provides a simple and easy way to convert threaded components to standard TTMA fl ange confi gurations. Made of lightweight, solid cast aluminum that is more durable than welded fabrications. Design improves fl ow through adapter even on the " reducer. Compact size reduces the overall space needed to install the adapter. available in " or " male or female NPT strong and lightweight solid one piece design TTFAL-MT TTFAL-EMT TTFAL-FT TTFAL-MT TTFAL-EMT TTFAL-FT TTFAL-MT TTFALHC-MT TTFALHC-MT " TTMA flange, " male NPT thread ½" OAL " TTMA flange, " male NPT ½" OAL " TTMA flange, " female NPT ½" OAL " TTMA flange, " male NPT thread ½" OAL " TTMA flange, " male NPT ½" OAL " TTMA flange, " female NPT ½" OAL " TTMA flange, " male NPT thread ½" OAL " TTMA flange, " male NPT thread, hardcoated ½" OAL " TTMA flange, " male NPT thread, hardcoated ½" OAL Pictured is 00-SFI-Al "obsolete". The 0-SFI is same without gasket TTFAL-MT TTFAL-EMT TTFAL-FT Bayco Petroleum Products FloTech Overfill Products Replacement Parts Index Dixon Bayco

20 Index Replacement Parts FloTech Overfill Products Bayco Petroleum Products Female NPT " " Petroleum Products Dry Disconnects Adapters Compatible with most cam and groove style dry disconnects. The Bayco dry disconnect helps prevent spillage from normal or accidental disconnects. A spring loaded sealing device is designed to "snap" closed should the valve become disconnected with the poppet open, significantly limiting liquid loss. Our dry disconnect couplings are available in a wide range of sizes, metals, and seal materials. Please refer to our product description cross-reference chart for details. Contact the factory at for chemical compatibility, size, and material selection. Special confi gurations can be designed for your application. two-piece adapter design for easy rebuilding of adapters fully interchangeable with Kamvalok (OPW trademark) style fi ttings Female NPT ½" " " ½" " " ½" " ½" " " ½" " " ½" " " ½" " " " ½" and " adapter " adapter adapter x female NPT Adapter Size " ½" " " ½" " ½" ½" " ½" " " ½" " " ½" " " ½" " " Adapter Size " " Seal Material Buna Viton Buna Viton Tefl on Encapsulated Silicone EPT (EPDM) Kalrez Tefl on Encapsulated Viton Viton B Max. PSI at Max. PSI Seal Material at 70 Buna 0 Viton 0 jump size adapter x female NPT Aluminum DBA-0 DBA-0 vapor adapter x female thread Female Adapter Max. PSI Stainless Seal Material NPSM Size at 70 " ½" Tefl on 0 DBVA7-00 stainless steel corrosion resistance is comparable to 0 stainless steel * Note: Please reference pages 9 and 90 for repair kits and replacement parts. aluminum fi ttings have aluminum nose piece and brass piston for pressure ratings at other temperatures, contact the factory Must be used with a DBC style coupler for adapter to operate. Couplers sold seperately on pages 9 and Aluminum DBA-0 DBA-00 DBA-00 DBA-0 DBA-00 DBA-00 DBA-00 DBA-00 DBA-0 DBA-00 DBA-00 DBA-0 DBA-00 DBA-00 DBA-0 DBA-00 DBA-00 DBA7-0 DBA7-00 DBA7-00 DBA9-00 OPW AN-AL AN-AL0 AN-AL0 AN-AL AN-AL0 AN-AL0 AN-AL0 AN-AL0 AN-AL AN-AL0 AN-AL0 AN-AL AN-AL0 AN-AL0 AN-AL AN-AL0 AN-AL0 7AN-AL 7AN-AL0 7AN-AL0 9AN-AL0 Stainless DBA7-0 DBA7-00 DBA7-00 DBA7-0 DBA7-00 DBA7-00 DBA7-0 DBA7-00 DBA7-00 DBA7-0 DBA7-00 DBA7-00 DBA7-0 DBA7-00 DBA7-00 DBA77-0 DBA77-00 DBA77-00 DBA79-00 OPW OPW 7AN-SS 7AN-SS0 7AN-SS0 7AN-SS 7AN-SS0 7AN-SS0 7AN-SS 7AN-SS0 7AN-SS0 7AN-SS 7AN-SS0 7AN-SS0 7AN-SS 7AN-SS0 7AN-SS0 77AN-SS 77AN-SS0 77AN-SS0 79AN-SS0 OPW 7AVN Dixon Bayco 00

21 DBCL-00 DBCL-00 locking handle kit for ½" and " dry disconnects locking handle kit for " dry disconnects Petroleum Products Dry Disconnects Couplers dry disconnect coupler has automatic closing poppet assembly aluminum fi ttings have stainless steel internals heavy duty stainless steel crank and link provide long service for pressure ratings at other temperatures, contact the factory life Dixon EZ Boss-Lock cam arms provide high security from stainless steel handle allows product exposure to corrosive accidental opening due to vibration or snagging on ½" and chemicals or washdown service " fi ttings strong handle attachment prevents bending of crank assembly large EZ Boss-Lock paddle type cam arms allow for an easy fully interchangeable with Kamvalok (OPW trademark) style grip on " fi ttings fi ttings Must be used with a DBA style adapter for coupler to operate. Adapter sold separately (page ). Female NPT ½" " " ½" " " ½" " " ½" " " ½" " " ½" " " " Female NPT ½" " Female NPT " " " ½" and " coupler x female NPT " coupler x female NPT coupler x female NPT Coupler Size " ½" " " ½" " " ½" " " ½" " " ½" " " ½" " " Coupler Size " ½" Coupler Size ½" ½" ½" Seal Material Buna Viton Teflon Encapsulated Silicone & Kalrez EPT (EPDM) Kalrez and Teflon Teflon Encapsulated Viton & Kalrez Viton B Seal Material Teflon Encapsulated Viton & Kalrez Max. PSI at Aluminum DBC-0 DBC-00 DBC-00 DBC-0 DBC-00 DBC-00 DBC-0 DBC-00 DBC-00 DBC-0 DBC-00 DBC-00 DBC-0 DBC-00 DBC-00 DBC7-0 DBC7-00 DBC7-00 DBC9-00 greaseless coupler x female NPT Max. PSI at Locking Handle Kit for Couplers OPW 7D-AL/7 7D-AL0/7 7D-AL0 7D-AL/7 7D-AL0/7 7D-AL0 7D-AL 7D-AL0 7D-AL0 7D-AL 7D-AL0 7D-AL0 7D-AL 7D-AL0 7D-AL0 777D-AL 777D-AL0 777D-AL0 779D-AL0 Stainless DBC77-0-GL DBC77-00-GL coupler x 90 swivel female NPT Seal Material Max. PSI Aluminum at 70 OPW Buna Viton Teflon Encap. Silicone DBS-00 DBS-000 DBS-000 7ES-000 7ES-000 and Kalrez Stainless DBC7-0 DBC7-00 DBC7-00 DBC7-0 DBC7-00 DBC7-00 DBC7-0 DBC7-00 DBC7-00 DBC7-0 DBC7-00 DBC7-00 DBC7-0 DBC7-00 DBC7-00 DBC77-0 DBC77-00 DBC77-00 DBC79-00 OPW 77D-SS 77D-SS0 77D-SS0 77D-SS 77D-SS0 77D-SS0 77D-SS 77D-SS0 77D-SS0 77D-SS 77D-SS0 77D-SS0 77D-SS 77D-SS0 77D-SS0 777D-SS 777D-SS0 777D-SS0 779D-SS0 OPW 777D-SS-GL 777D-SS0-GL stainless steel corrosion resistance is comparable to 0 stainless steel Kalrez gasket, main seal O-ring and handle O-ring. Tefl on seals on cylinder assembly, stuffi ng box & seal under poppet screw. * Note: Please reference pages 9-99 for repair kits and replacement parts. Bayco Petroleum Products FloTech Overfill Products Replacement Parts Index Dixon Bayco

22 Petroleum Products Index Replacement Parts FloTech Overfill Products Bayco Petroleum Products Dry Disconnects The DC style couplers work with the DBA adapters for applications where automatic closure for the coupler is not desired. This coupler is suited to vapor recovery, suction pump line and applications where it is necessary to easily drain the hose or piping for clean out. It can also be used when product retention in hose or pipe is desired but damage from accidental spill from open coupler is not a concern. ½" " 0 stainless steel roll pins stainless steel body stainless steel internal components E-Z Boss-Lock cam arms stainless steel locking lever included available with Buna, Viton, Viton-B, EPDM, Kalrez, Tefl on encapsulated Silicone and Tefl on encapsulated Viton seals used with poppeted adapter DBA series Size ½" " ½" " ½" " ½" " ½" " ½" " ½" " Seal Material Buna Buna Viton Viton Tefl on Encapsulated Silicone Tefl on Encapsulated Silicone EPDM EPDM Tefl on Encapsulated Viton Tefl on Encapsulated Viton Kalrez Kalrez Viton-B Viton-B * Note: Please reference page 00 for replacement parts. Stainless Steel DC7-0 DC7-00 DC7-0 DC7-00 DC7-0 DC7-00 DC7-0 DC7-00 DC7-0 DC7-00 DC77-0 DC77-00 DC79-0 DC79-00 OPW 7D-SS 7D-SS0 7D-SS 7D-SS0 7D-SS 7D-SS0 7D-SS 7D-SS Dixon Bayco 00

23 smooth coupling action and swivel rotation BA-00 Dixon BA-00 BA-00 BA-00 BA-00 BA-00 BA-00 Emco J7A-BBN0-B / J7A-ABN0-B J7A-BVN0-B / J7A-AVN0-B J7A-BBN0-B J7A-BVN0-B J7A-ANB0-B J7A-AVN0-B Petroleum Products Bayonet Style Dry Disconnects Bayonet dry disconnect fi ttings are guaranteed to be compatible with existing models. These fi ttings are designed and tested to provide maximum performance. Stainless Steel Adapters BA-00 * Note: Please reference pages 0 replacement parts. Aluminum Couplers ", Buna seals, stainless steel body, brass poppet ", Viton seals,stainless steel body, brass poppet ", Buna seals, brass body, brass poppet ", Viton seals, brass body, brass poppet ", Buna seals, anodized aluminum body and poppet ", Viton seals, anodized aluminum body and poppet BA-00 Bayco Petroleum Products FloTech Overfill Products Dixon BS-00 BS-00 BSS-00 BSS-00 BS-00 BS-00 BSS-00 BSS-00 BS-00 BSS-00 Emco J7C-ABN-B J7C-AVN-B J7C-ABNB J7C-AVN-B J7C-ABN-B J7C-AVN-B J7C-ABN-B J7C-ABN-B Emco is a trademark of Gardner Denver Corporation Dixon BC-00 BC-00 Emco J7C-ABN0-B J7C-AVN0-B BS-00 ", Buna seals, 90 swivel ", Viton seals, 90 swivel ", Buna seals, straight swivel ", Viton seals, straight swivel ", Buna seals, 90 swivel ", Viton seals, 90 swivel ", Buna seals, straight swivel ", Viton seals, straight swivel Anodized Aluminum Couplers BC-00 Emco is a trademark of Gardner Denver Corporation * Note: Please reference pages 0-0 for replacement parts. ", Buna seal, straight ", Viton seal, straight BSS-00 Replacement Parts Index Dixon Bayco

24 Index Replacement Parts FloTech Overfill Products Bayco Petroleum Products WAYBV00 WAYBV00VIC Petroleum Products Aluminum Ladder Step " wide, contoured for welding to " aluminum tube serrated anti-slip tread cast from high tensile aluminum alloy " Aluminum Dummy Adapter " Pipe Cap Grounding Studs " NPS female thread aluminum body with Buna gasket comes with heavy duty " chain and S hook working pressure: 0 PSI PC0 Two Way Diverting Valves WAYBV00 WAYBV00SW Tube Doors welds to standard aluminum hose tube stainless steel spring lockable quality cast aluminum TDF TDF7 TDF solid brass, stainless steel with /"- UN-A thread for static electric grounding and overfill protection systems GS GS Material brass stainless steel working pressure: 0 PSI available in " and " standard and two-way fl ow female NPT outlets are standard optional fl anges are available high fl ow rate; low pressure drop wetted parts are aluminum and stainless steel seals are FPM (Viton and PTFE Teflon ) spindle can be disassembled even when ball valve is installed WAYBV00 WAYBV00 WAYBV00VIC WAYBV00SW S similar to BZ0 tank collar, but cast aluminum welds to aluminum cabinet for clamp mounting of drop elbows AL0-BORE " 7" " * Note: Please reference pages 77 for repair kits and replacement parts. ", way diverting ball valve ", way diverting ball valve ", way diverting ball valve with victaulic grooved ends ", way diverting ball valve with socket weld ends Dixon Bayco 00

25 NPSM Size " Petroleum Products Tank Truck Equipment Fusible Pipe Caps NPSM Thread Stainless Steel Aluminum 00-SFC-SS 00-SFC-AL Pipe Caps NPSM Thread Iron 00-SFC-MI NPSM Size Stainless Steel Aluminum Iron " " " 00-PC-SS 00-PC-SS 00-PC-SS 00-PC-AL 00-PC-MI 00-PC-MI Reducers Female NPSM x Male NPT NPSM Size NPT Size Stainless Steel Aluminum Iron " " Reducing Caps Female NPSM x Female NPT NPSM Size NPT Size Stainless Steel " " 00-RC-SS Tefl on gaskets standard in stainless steel Tank Transport Equipment - Intermodal Stainless Steel Thread Adapter Female BSPP x Male NPT BSPP Size NPT Size " " 00RDSSAP Stainless Steel Adapter Cam and Groove Adapter x BSPP Thread NPSM Size BSPP Size " " " " 00-RD-SS 00-RD-SS Stainless Steel Pipe Caps BSPP Thread BSPP Size " 00PCSSAP " ½" 00-RD-AL 00-RD-AL Stainless Steel Reducers Female BSPP x Male NPT 00-RD-MI BSPP Size NPT Size " " 00RDSSAP 00ASSSAP 0ASSAP Tank Transport Gaskets and Washers Size Buna-N Tefl on Neoprene Viton ½" " " " 00GPCBU 00GPCBU 0GPCTF 00GPCTF 00GPCTF 00GPCTF KNW KNW KNW0 KVW KVW Bayco Petroleum Products FloTech Overfill Products Replacement Parts Index Dixon Bayco

26 Petroleum Products Index Replacement Parts FloTech Overfill Products Bayco Petroleum Products Note: Some fuel additives are not compatible with certain seal materials. Please contact the Factory for fuel additive compatibility. Automatic Shut-Off Nozzles for card lock and truck refueling stations Venturi type automatic shut-off high pressure design for up to 0 GPM fl ow (requires minimum 7. GPM for auto shut-off) detachable trigger rachet aluminum construction with bronze trigger with spout without spout Inlet Size Spout Size D D AN AN0 ¼" ½" ¼" ½" Pressure Nozzles for Bulk Delivery Overwing Aircraft Nozzles Large Capacity Low Pressure/Gravity Nozzle ⅜" ⅜" ⅜" ⅜" U/L Listed * Note: Please reference pages for repair kits. manual operation (non-automatic) for high pressures and fuel fl ow up to 0 GPM easy opening dash pot design with shockless closing bronze trigger with aluminum body and spout detachable trigger ratchet, packing gland and seal With Spout Inlet Size Spout Size D D ¼" ½" ¼" ½" Without Spout Inlet Size Spout Size DNS DNS ¼" ½" ¼" ½" * Note: Please reference pages 79 for repair kits and replacement parts. manual operation (non-automatic) for high pressures and fuel fl ow up to 0 GPM easy opening dash pot design with shockless closing aluminum body bronze trigger with plastic guard pad to protect wing detachable trigger ratchet, packing gland and seal aluminum spout has cap with spring cord and a fi ne mesh stainless steel screen fi lter screw attachment for grounding cable Inlet Size Spout Size DAV-0ASM DAVR D-AV ½" ¼" ¼" * Note: Please reference pages 0 for repair kits and replacement parts. rugged utility nozzle for low pressure/gravity applications rapid fl ow due to ¼" oversize design aluminum body, spout and trigger PSI maximum pressure ¼" " ¼" Inlet Size Spout Size 0-9 ¼" ¼" * Note: Please reference pages for repair kits and replacement parts Dixon Bayco 00

27 Petroleum Products Note: Some fuel additives are not compatible with certian seal materials. Please contact the Factory for fuel additive compatibility. Ball Nozzles for Bulk Delivery The Bayco brand ball nozzle uses a full port ball valve for high fl ow rate at a given inlet pressure. The internal fl ow path is computer designed to provide low pressure drop across the nozzle. Lower pressure drop permits higher fl ow rates at lower pressure, reducing foaming or backups. Our unique swivel design permits low temperature operation without leakage around the O-ring seals. The swivel freely rotates even at temperatures as low as -0 F and pressures as high as 00 PSI. Through-hardened chrome steel roller balls and hardened carbon steel ball race provide long service life. Standard nozzle uses a PSI check valve. An optional PSI check valve is available as a fi eld replaceable kit. available with a fi eld replaceable Scully compatible connector or tube spout BL0 BL0 BL0 BL0NS BL0 BL0NS BL07 BL07NS A A ¼" NPT swivel inlet x quick fi ll outlet ½" NPT swivel inlet x quick fi ll outlet ¼" NPT swivel inlet x ¼" NPT with spout ¼" NPT swivel inlet x ¼" NPT without spout ½" NPT swivel inlet x ¼" NPT with spout ½" NPT swivel inlet x ¼" NPT without spout ½" NPT swivel inlet x ½" NPT with spout ½" NPT inlet x ½" NPT without spout ¼" aluminum replacement spout ½" aluminum replacement spout BL07 BL0 Bayco Petroleum Products FloTech Overfill Products * Note: Please reference pages and for repair kits & replacement parts. Super Ball Nozzles BL9 BL99 BL90 A 97 Swivel Nut Pipe Adapters for Ball Nozzles Nozzle connectors are manufactured from rugged cast bronze. Short body reduces overall length of nozzle. Interchangeable with other manufacturers. For home fuel oil delivery. BL00 BL00 BL00 ½" NPT inlet x " NPT spout outlet " NPT inlet x ½" NPT spout outlet " NPT inlet x " NPT spout outlet ½" aluminum replacement spout " aluminum replacement spout * Note: Please reference pages and 7 for repair kits and replacement parts. ¼" male NPT ½" male NPT fi ne thread Inlet Size BL90 Replacement Parts Index Dixon Bayco

28 Petroleum Products Index Replacement Parts FloTech Overfill Products Bayco Petroleum Products * Note: Please reference pages for repair kits and replacement parts. Standard Utility Nozzles [ Hose Swivels For use with petroleum and home heating oil hose prevents twisting or kinking SWMF, SWMF0 & SWMF00 are made in Bayloy Standard Hose Swivels SWMF SWMF0 SWMF00 Bronze Hose Shank Swivels Bronze Check Valve Hose Swivels Angle Valves for use with volt pumps and gravity fl ow diecast metal body; choice of spouts for economy fuel dispensing, including construction, farm and small truck utility tanks U/L Listed PSI pressure rating Inlet Size Spout Size S 900B 900WS 900WB 900S 900B " " " " " ¾" ¾" ¾" ¾" Male NPT Female NPT ¼" ½" " No spout, nozzle body only " straight " bent ¾" straight ¾" bent ¾" straight ¾" bent " replacement straight spout " replacement bent spout ¾" replacement straight spout ¾" replacement bent spout ¼" ½" " * Note: Please reference pages for repair kits and replacement parts. Male NPT Hose Shank Size U ½" ½" * Note: Please reference pages for repair kits and replacement parts. Male NPT Female NPT 0R ¼" ½" * Note: Please reference pages for repair kits and replacement parts. Rotation of cap controls gravity fl ow from above ground gasoline storage tank. inlet (pipe from storage tank) x outlet (for hose and nozzle dispensing) lockable (lock not included) cast non-ferrous alloy construction Inlet Size Outlet Size 00AV AV " ¼" " ¼" * Note: Please reference pages for repair kits and replacement parts. Dixon Bayco 00

29 Petroleum Products Above Ground Petroleum Tank Accessories Dixon Bayco brand accessories are rugged, reliable products which have serviced the petroleum industry for over 0 years. 000L 00L 00RW 00-PV-9 Automatic Pressure/Vacuum Relief Caps normally closed, stops fuel evaporation and airborne contaminants lockable " male NPT, relieves vacuum at.7 Hg (. PSI) and pressure at PSI, 0 SCFM flow ½" male NPT, relieves vacuum at.7 Hg (. PSI), and pressure at PSI, 0 SCFM flow removal wrench for PV caps " male NPT, relieves vacuum relief at " Hg (. psig), and pressure at between 7. and 9 psig allows venting of tank to atmosphere at all times aluminum body male NPS inlet does not have pressure or vacuum valves 00SFV BZ0 BY0 NPT Size " " Size ½" Height ½" ½" For stationary fuel tanks For mobile fuel tanks Standard Vent Cap Underground Tank Collars Standard " Fill Adapters Material bronze bayloy Short " Fill Adapter comes with gasket seal often employed when soil settles around tank and shorter height is required NPSM Size Height Material BZ0S " -/" bronze poppeted vapor collar at station vapor outlet Vapor Adapters can also be used as vapor valve on tanker but does not have air interlock mount low profi le design NPT Size Height Material VR0 " -/" bronze VR0BY " -/" bayloy * Note: Please reference pages 7 for replacement parts. Single Action Fill Caps for use with underground tank fi ll adapter (top seal) lockable, push-pull operation choice of aluminum or bronze body bronze cam arms includes Buna gasket Size SA00AL " SA00BZ " * Note: Please reference pages for replacement parts. relieves both pressure and vacuum buildup in fuel tanks choose for stationary or mobile fuel storage tanks as listed below. Dixon Bayco Bayco Petroleum Products FloTech Overfill Products Replacement Parts Index

30 Index Replacement Parts FloTech Overfill Products Bayco Petroleum Products materials: - body (straights) tube, supports and grippers: brass CA0 - forged elbows and tees: brass CA77 - O-ring: Buna-N working pressure: Fittings are suitable for use up to the maximum working pressure of the plastic tubing used. Also suitable for vacuum service. working temperature: -0 F to F pre-applied thread sealant (Loctite ) on all male pipe threads compatible tubing: SAE J specifi cations: meets D.O.T FMVSS 7.0 and SAE J, SAE J9- and SAE J9- Male Connectors (tube to male NPT) Tube Male OD NPT /" /" /" /" /" /" /" /" /" /" Petroleum Products D.O.T. Push-in Fittings AQDOTx AQDOTx AQDOTx AQDOTx AQDOTx Swivel Male Branch Tees (tube to male NPT) Tube Male OD NPT /" /" /" /" AQ7DOTSx AQ7DOTSx Union Tees (tube to tube) Tube OD /" /" Tube OD /" /" AQDOT AQDOT Unions (tube to tube) 000DOT 0000DOT Union Tees (tube to tube) Tube OD /" /" 000DOT 0000DOT Male Elbows (tube to male NPT) Tube Male OD NPT /" /" /" Swivel Male Elbows (tube to male NPT) Tube Male OD NPT /" /" /" /" /" /" /" /" /" /" /" /" /" AQ9DOTx AQ9DOTx AQ9DOTx AQ9DOTSx AQ9DOTSx AQ9DOTSx AQ9DOTSx AQ9DOTSx Swivel Male Branch Tees (tube to tube) Tube Male OD NPT /" /" /" /" AQ7DOTSx AQ7DOTSx Union Connectors (tube to tube) Tube OD /" /" AQDOT AQDOT Union Elbows (tube to tube) Tube OD /" /" Tube OD /" /" 000DOT 0000DOT Y Unions (tube to tube) 000DOT 0000DOT Dixon Bayco 00

31 Petroleum Products Male Elbows (tube to male NPTF) Tube Male OD NPTF /" /" /" /" Straight Male Connectors (tube to male NPTF) Tube Male OD NPTF /" /" /" /" Male Branch Tees (tube to male NPTF) Tube Male OD NPTF /" /" /" /" /" /" /" /" /" /" /" /" /" /" /" /" 09DOT 09DOT 090DOT 090DOT DOT DOT 0DOT 0DOT 0DOT 0DOT 00DOT 00DOT D.O.T. Push-in Fittings D.O.T. Air Brake Tubing Rolls meets Department of Transportation FMVSS-0 nylon material conforming to SAE J shipped in lengths of 00' roll working pressure: 0 PSI temperature range: -0 F to 00 F O.D. Length Color /" /" /" /" /" /" 00' 00' 00' 00' 00' 00' Black Blue Red Black Blue Red Y Connectors (tube to male NPT) Tube Male OD NPT /" /" DOT Straight Female Connectors (tube to Female NPTF) Tube Female OD NPT /" /" Male Branch Tees (tube to tube to male NPTF) Tube Male OD NPTF /" /" /" /" /" /" /" /" /" /" DOT 0DOT 0DOT 0DOT 00DOT 00DOT J-0-BL-00 J-0-B-00 J-0-R-00 J-0-BL-00 J-0-B-00 J-0-R-00 Bayco Petroleum Products FloTech Overfill Products Replacement Parts Index Dixon Bayco

32 Index Replacement Parts FloTech Overfill Products Bayco Petroleum Products Short Hex Style (series HN) Size " ½" " " Petroleum Products Adapter Nipples These fi ttings are designed to provide minimum pressure drop and uniform strength. Maximum working pressure is 000 PSI. A7S A7S A7S A7S Note: items will be discontinued as stock is depleted " ½" " " AVN AVN00-00 AVN AVN Victaulic x Weld Long Pipe Style (series AN) Size " ½" " " " " A7 A7 A7 A7 A7 A7 Size Aluminum Carbon Steel Stainless Steel VN VN00-00 VN VN Quick Release Couplings - Series Q Lightweight Flexible Couplings - Series L VNR VNR00-00 VNR VNR Quick Release Couplings are specially designed for applications requiring a quick connection and/or disconnection of a pipe joint. A locking pin through the handle prevents accidental opening of the coupling. ductile iron body with zinc plating and steels safety clip. Nominal Size ½" " ½" " " " Pipe OD.900".7".7".00".00"." Max. Working Pressure PSI Max. End Load Lbs Interchangeable with: Victaulic #7 Grinnells #700 Approx. Weight Lbs Ductile Iron w/ EPDM gasket H H H H H H Ductile Iron w/ Buna-N gasket HBU HBU HBU HBU HBU HBU Lightweight fl exible couplings are designed for applications requiring moderate internal pressure or where weight is a factor. Applications include: general purpose, mining, irrigation, and compressed air where a defl ection of % or less is required. ductile iron body with rust inhibiting paint Underwriters Listed and Factory Mutual approved Nominal Size ½" " ½" " " " " Pipe OD.900".7".7".00".00"."." Max. Working Pressure PSI Max. End Load lbs Qty. /" /" /" /" /" /" /" Interchangeable with: Victaulic #7 Grinnells #7000 Bolts Size x x x x x x x -7/" -7/" " -/" -/" -/" -/" Approx. Wt Lbs Ductile Iron w/ EPDM gasket L L0 L0 L0 L0 L0 L0 Ductile Iron w/ Buna-N gasket LBU L0BU L0BU L0BU L0BU L0BU L0BU Dixon Bayco 00

33 Petroleum Products DBV-VB00 DBV-VB00 DBV-BN00 DBV-BN00 DBV-WB00 G00VB G00VB G00T G00T G00N " aluminum bolted clamp with Viton B " aluminum bolted clamp with Viton B " aluminum bolted clamp with buna-n " aluminum bolted clamp with buna-n " aluminum bolted clamp with white buna-n " Viton B grooved coupling gasket " Viton B grooved coupling gasket " buna-n grooved coupling gasket " buna-n grooved coupling gasket " white buna-n grooved coupling gasket Victaulic Clamps Lightweight, quality aluminum clamps ensure a leak-tight connection. Unlike steel groove clamps that secure pipe ends with high clamp force against the tubing walls, the Dixon bolted clamp takes the full bolt force and locks in the groove of the tube preventing distortion of the tube diameter. " pressure rating: 70 PSI " pressure rating: 0 PSI bolt torque: 0 ft. lbs. precision casting and machined dimensions provide an exact fi t and great appearance clamp with black buna gasket API Bottom Rack Loading Fittings Dixon API coupler uses a snap on connection where the coupling action is automatic upon contact with the API adapter. The coupler is completely modular so it can be built with various face seal combinations to be compatible with different alternative fuel, performance levels and applications. Two models are available: bonded nose seal and replaceable nose seal. " TTMA inlet mounting fl ange cam design for easy alignment and tight connection ball-end handle for easy, comfortable operation no special tools needed for maintenance shaft seals can be changed without removing coupler from loading arm fully compliant with API RP00:00 specifi cations use of lock nuts prevents clamps from loosening in high vibration applications Viton B rated for 00% biodiesel and Ethanol Buna-N rated for petroleum service, Ethanol to E00, & biodiesel to B0 white buna-n for use in dry bulk food applications fully interlocked collar can not be opened when connected and can not be disconnected when opened one piece bonded nose seal ensures long life and cannot be washed out optional replaceable nose seal for quick replacement without removal from loading arm Bayco Petroleum Products FloTech Overfill Products Material Specifi cations: body: hard coated anodized AL T shroud: hard coated anodized AL T, SS insert link, shaft, pin and crank: hardened 7-PH stainless steel cam: CFM stainless steel poppet and bearing: ZA- seal options: Baylast, Viton-B, Viton GFLT Chemical Compatibility (Baylast seals): gasoline diesel avgas 00% ethanol 00% methanol B to B0 biodiesel blends Technical Specifi cations: weight: 0 lbs. maximum working pressure: 0 PSI peak surge pressure: 0 PSI operating temperature: Viton seals: -0 F to +00 F Baylast seals: -0 F to +0 F maximum flow rate: 00 GPM pressure drop: to PSI Bonded Nose Seal # 00 00B 00G Replaceable Nose Seal # 00 00B 00G Seal Material Baylast Viton-B Viton GFLT Chemical Compatibility (Viton-B seals): gasoline diesel jet fuel avgas 00% ethanol 00% methanol 00% biodiesel any blend of the above fl uids bonded nose seal model - 00 *(price and delivery on request) Dixon Bayco Replacement Parts Index

34 Petroleum Products Index Replacement Parts FloTech Overfill Products Bayco Petroleum Products V-ring Type ) body ) sleeve ) ball bearings ) seal retainer ) V-ring (pressure) seal ) spring retainer 7) spring ) ball retainer screw 9) grease fitting 0) O-ring (dust) seal O-ring Type. O-ring (dust) seal. ball retainer screw. O-ring (pressure) seal. grease fi tting. ball bearings Swivel Joints single plane Style 0 double plane Style 0 triple plane Style 0 Style 0 Style 0 Style 0 Style 0 Style 70 V-ring type available in carbon steel and stainless steel. O-ring type available in aluminum, brass, iron, steel and stainless steel. Sizes from " - ". Pressures to,000 PSI. For more information, see the Dixon Swivel Brochure Dixon Bayco 00

35 sizes available from ½" through " swaged connections available EZ Boss-Lock Extremely easy to open and close without inserting clips or pins. Ideal for vibration tolerant locking. Resistant to accidental disconnection when dragged. Type A (male adapter x female NPT) Petroleum Products Cam and Groove Couplings Boss-Lock Cast-in lugs allow safety clips to be attached once the lugs are passed through slots in the special cam lever arms. These clips prevent the coupler from being unlocked until they are removed, providing a positive locking action. interchange with products manufactured to A-A-9B available in aluminum, brass, iron, stainless steel, plastic See current Dixon Price List for complete pricing and part#'s. Type B Type C (female coupler x male NPT) (female coupler x hose shank) Dixon Durable stainless steel cam arm pins will not rust or bind. Recess holds gasket firmly in place, ensuring proper placement. Long shank design allows proper banding thus eliminating the major cause of hose damage. Pressure Ratings: Recommendations based on the use of mating Dixon fi ttings at ambient temperature (70 F) with standard Buna-N Seal installed. For use at elevated temperature or other unusual operating conditions, consult the factory. Dixon, Boss-Lock and EZ Boss-Lock couplers and adapters maximum working pressure are as follows: Size ½" ¾" thru " ½" " " " and " " PSI Type D (female coupler x female NPT) Bayco Petroleum Products FloTech Overfill Products Type E (male adapter x hose shank) Type F (male adapter x male NPT) Type DC * (dust cap) * Dust caps and dust plugs are not to be used in pressure applications for safety and environmental reasons. Warning! Under no circumstances should cam & groove be used for compressed air or steam service! Type DP * (dust plug) Replacement Parts Index Dixon Bayco

36 Petroleum Products Index Replacement Parts FloTech Overfill Products Bayco Petroleum Products adapter x 0# ASA fl ange coupler x 0# ASA fl ange drilling coupler x 0# ASA fl ange drilling Adapters and Couplers x 0# Flanged Drilling Size " ½" " " " " *" Size " ½" " " " " *" Size " ½" " " " " Adapter x 0# ASA Flange Aluminum 00-AL-AL 00-AL-AL 00-AL-AL 00-AL-AL 00-AL-AL Iron 00-AL-MI Dixon Coupler x 0# ASA Flange Aluminum 00-DL-AL 00-DL-AL 00-DL-AL 00-DL-AL 00-DL-AL EZ Boss-Lock Coupler x 0# ASA Flange parts are produced as a welded fabrication Stainless Steel RDL00EZ RDL0EZ RDL00EZ RDL00EZ RDL00EZ RDL00EZ Stainless Steel 00-AL-SS 0-AL-SS 00-AL-SS 00-AL-SS 00-AL-SS 00-AL-SS Stainless Steel 00-DL-SS 0-DL-SS 00-DL-SS 00-DL-SS 00-DL-SS 00-DL-SS Approximate Flange Thickness 9/" /" 7/" 7/" 7/" /" Approximate Flange Thickness 9/" /" 7/" 7/" 7/" /" * No standard exits for " fittings so they generally do not interchange with other manufacturers and Boss-Lock Dixon Bayco 00

37 Petroleum Products Size " " x " " " Dixon Adapters and Couplers x Round Tank Truck Flange Aluminum 00-ALT-AL 00ALT-AL 00-ALT-AL 00-ALT-AL adapter x round tank truck flange Stainless Steel 00-ALT-SS 00-ALT-SS parts are produced as a welded fabrication Pressure rating is based on the seal of the mating part. See ratings on page. Size " " x " " " Couplers are supplied standard with a Buna-N gasket. Other gasket types are available, contact the factory. coupler x round tank truck flange Aluminum 00-DLT-AL 00DLT-AL 00-DLT-AL 00-DLT-AL ½ adapter x round tank truck flange Size Aluminum " 00ALTAL Pressure rating is based on the seal of the mating part. See ratings on page. adapter x round tank truck fl ange coupler x round tank truck fl ange ½ adapter x round fl ange Bayco Petroleum Products FloTech Overfill Products ½ coupler x round tank truck flange Size Aluminum " 00DLTAL ½ coupler x round tank truck fl ange Adapters and Couplers with Straight Pipe Thread (NPSM) for delivery of dry goods cork buna gaskets are standard in threaded end, replacement gasket: 00GAGFI Pressure rating is based on the seal of the mating part. See ratings on page. adapter x NPSM thread Size Aluminum " 00-AS-AL Coupler is supplied standard with a Buna-N gasket. Other gasket types are available, contact the factory. Boss-Lock coupler x NPSM thread Aluminum Size " ADS00 Replacement Parts Index Dixon Bayco

38 Index Replacement Parts FloTech Overfill Products Bayco Petroleum Products Nominal Pipe Size " -/" " -/" " " " " " 0" " Flange O.D. -/" " " 7" 7-/" 9" 0" " -/" " 9" Thickness 9/" /" /" 7/" /" /" /" " -/" -/" /" /" raised face is included in the thickness. Nominal Pipe Size " " " Flange O.D. -/" -/" -7/" listed thickness is for aluminum fl anges Petroleum Products Flange Information Dimensions of 0 lb. ASA O.D. of Raised Face " -7/" -/" -/" " -/" 7-/" -/" 0-/" -/" " Diameter of Bolt Circle -/" -7/" -/" -/" " 7-/" -/" 9-/" -/" -/" 7" Dimensions of Tank Truck (TTMA) Thickness /" /" /" Diameter of Bolt Circle -7/" -7/" -/" Number of Bolts Number of Bolts Flange Bolt Tightening Sequence (use appropriate gaskets and bolts) Diameter of Bolt Holes /" /" /" /" /" /" 7/" 7/" 7/" " " Diameter of Bolt Holes 7/" 7/" 7/" bolt bolt bolt Diameter of Bolts /" /" /" /" /" /" /" /" /" 7/" 7/" Diameter of Bolts /" /" /" Dixon Bayco 00

39 Overfi ll Products Bayco Petroleum Products Overfi ll Products/Replacement Parts Flotech Overfill Detection Section Replacement Parts Index Dixon Bayco

40 Index Replacement Parts Overfi ll Products/Replacement Parts Bayco Petroleum Products Probe Tube Prism Carrier Elastomer Seals Overfi ll Products FloTech Overfill Products Knowledge and Experienced Design Prism "Best in Class" Technical Support Easy Installation Products In Stock, Delivered On Time We Back A Great Product With An Unparalleled Warranty About FloTech... Dixon electronic staff are seasoned veterans when it comes to overfill systems. Our employees have years of experience in electronics, manufacturing and most important, with the in-the-field trouble shooting of overfi ll terminal and tanker installation. That is why we have focused on easy, drop-in replacement features with improved probe life, and why we have included heavy duty hardware made from premium, corrosion resistant materials. Trouble Free Probes and Sensors: FloTech brand probes/sensors do not use epoxy bonded prisms as a means to seal the prism. Therefore, they are not subject to malfunction due to epoxy/prism interface separation. FloTech brand probes/sensors incorporate a double elastomer design which seals and secures the sensitive optic prism tip. The elastomer seals are fl exible allowing thermal expansion and resistance to steam cleaning and petroleum chemical attack. Our goal is to provide the most reliable overfi ll components and systems available on the market today. Over the years the FloTech brand has earned a reputation for reliable overfi ll components compatible with other common systems. Don t take our word on this, ask one of our many customers! FloTech brand items are shipped with easy to follow installation instructions and manuals. If you need a little extra help call our toll free technical service hot line at In fact, call us with any overfi ll system questions (regardless of the brand) and we will work with you to help solve the problem. FloTech brand components are manufactured to be installed easily, even on other systems. We designed them to be drop-in compatible with API systems being used around the world. FloTech brand products are stocked at locations throughout the United States and Canada. Most orders can be processed and delivered within hours. We know that downtime costs you money so we do everything we can to ensure you receive your parts when you need them. FloTech brand products are covered by a three year limited warranty. The warranty is part of the total system that makes FloTech overfi ll detection the best choice for your operation. See limited warranty on page for details Dixon Bayco 00

41 Overfi ll Products Checkmate Plug-n-Play Providing years of proven, trouble-free service, FloTech's Checkmate FT0 and FT90 dual sockets are the core to the new, streamline easy to install design. Checkmate has a long list of features to confi gure a system to match your application: integrated dual API sockets and onboard monitor in one unit Prewired, factory tested API Optic and Thermistor sockets eliminate hours of crimp wire connection preparation and worrying about unreliable handwork. Dual sockets are available with FloTech's unique, guaranteed for life stainless steel socket wear rings. Dual monitor compartments allow access to sockets without opening monitor box. 'Top Only' or 'Top and Bottom' sensors are available with the same monitor high-tech color-coded display shows well on customized trailers Water-tight, prewired, durable and integrated fuse holder fi tted into the monitor enclosure, eliminates the need to fabricate a fuse holder or enclosure on the side of the monitor box. Plug-n-Play feature eliminates crimp wire connections; simply bolt the monitor to the trailer, install the sensors in the manhole and plug everything together. Sealed connectors pass IP7 and DIN 000 salt spray tests. compact footprint takes less space than monitor and sockets mounted separately adaptable to Plug-n-Play harness or standard wiring system confi gurable high current relay output for pump or signal control All stainless steel hardware and terminal blocks prevent corrosion. integrated optional ground bolt or Scully TIM module Optional pressure sensor interlocks brake set or vapor vents disabling overfi ll permit signal. Optional FloTech Data Link feature (patent pending) is only available on Checkmate model onboard monitors. Data Link gives maintenance staff the ability to download the performance and diagnostic history of overfi ll systems. Plug the FloTech hand-held diagnostic terminal into the Checkmate monitor and download to your PC a time and date stamped history of every wetted or failed sensor, rack connection, auxiliary input and load/unload data. Special packages for OEM tank accounts reduce installation costs; contact Dixon for details. Bayco Petroleum Products Overfi ll Products/Replacement Parts Replacement Parts Index Dixon Bayco

42 Index Replacement Parts Overfi ll Products/Replacement Parts Bayco Petroleum Products Overfi ll Products Checkmate Plug-n-Play Please refer to part number and system kits for the new FT0-90 Checkmate series overfi ll system. The part numbers below show how to build a Checkmate system with all options available. The part numbering system is built from the core monitor part number FT0-90. All FT0-90 Checkmate monitors have an API dual socket assembly integrated into the monitor housing. Standard socket confi gurations include API Optic ( J-Slot pin) and API Thermistor ( J-Slot 0 pin). FT0-90PG FT0-90PGT FT0-90PGS Monitor Part Numbers Checkmate monitor with dual socket assembly, Plug-n-Play connectors and ground bolt, Top Only Checkmate monitor with dual socket assembly, Plug-n-Play connectors, ground bolt and TIM chip, Top Only Checkmate monitor with dual sockets, Plug-n-Play connectors, ground bolt and pressure sensor, Top Only FT0-90PGST Checkmate monitor with dual sockets, Plug-n-Play connectors, ground bolt, pressure sensor and TIM chip, Top Only FT0-90PGSTO Checkmate monitor with dual sockets, Plug-n-Play connectors, ground bolt, pressure sensor, TIM chip and DIN power cord, Top Only List of Options G = ground bolt T = TIM module S = pressure switch for vapor vent or brake detection P = Plug-n-Play, Top Only PP = Plug-n-Play, Top and Bottom O = dual pin power cord System kits will have a four digit part number extension to defi ne number of compartments and 'Top Only' or 'Top and Bottom' sensor confi gurations. -XXXX fi rst two digits indicate the sensor length 0 = standard " length = longer " length third digit indicates 'Top Only' or 'Top and Bottom' systems 0 = 'Top Only' system = 'Top and Bottom' system fourth digit indicates number of compartments through = number of compartments for Plug-n-Play systems ( comp. max) through = number of compartments for wired systems All system kits contain the following items and are complete for a turnkey installation: FT0-90P series monitor with options listed above one FTP overfill sensor per compartment one FTP retain sensor per compartment for 'Top and Bottom' systems one Plug-n-Play cable harness for 'Top Only' or two harnesses for 'Top and Bottom' systems Sample Part Numbers FT0-90PGS-00 Checkmate system with ground bolt, pressure switch, Plug-n-Play harness, standard length sensors, compartments, 'Top Only' FT0-90PG Checkmate Plug-n-Play monitor with ground bolt, monitor only FT0-90PPG- Checkmate Plug-n-Play system with ground bolt, " long probes, compartments, 'Top and Bottom' system Additional Part Numbers FTP Checkmate top sensor with Plug-n-Play connector, FT00 FloTech one compartment harness standard length FT00 FloTech two compartment harness FTP - Checkmate top sensor with Plug-n-Play connector, FT00 FloTech three compartment harness " length FT00 FloTech four compartment harness FTP Checkmate retain sensor with Plug-n-Play FT00 FloTech fi ve compartment harness connection FT00 FloTech six compartment harness FT Test lead set for FT0 to test Plug-n-Play sensors Dixon Bayco 00

43 Overfi ll Products Checkmate Retain Overfill System -Wire Black and White FloTech's Checkmate system offers advanced automatic self-checking technology and performance enhancing features not found in any other system! The FloTech Checkmate has a long list of features that greatly improve reliability and provide years of trouble free service. Checkmate is compatible with the Scully brand black and white two-wire, overfi ll and retain system. The components are drop-in replacements and compatible with the signal format required by Scully brand on-board monitors. Bayco Petroleum Products Overfi ll Products/Replacement Parts FT0 Checkmate Retain / Overfill Monitors easy to follow programming guide for a maximum of eight compartments "top only" or "top and bottom" service with the same monitor Monitor can be programmed up to 00,000 times without sending it back to the factory. Monitor resists oxidation of wire connections. Stainless steel terminal blocks resist rusting of contacts. Stainless steel hardware is used on all products. powder coated color matched components for exceptional appearance auxiliary input for Hobbs type switches power control relay output drop-in compatibility, see compatibility chart on pages 0 and Factory Mutual and Canadian Standards Association approved wide input power - VDC Replacement Parts Index Dixon Bayco

44 Index Replacement Parts Overfi ll Products/Replacement Parts Bayco Petroleum Products Overfi ll Products Checkmate Retain Overfill System -Wire Black and White Checkmate Overfill Systems (top only) FloTech brand overfi ll system kits provide everything needed to install a new overfi ll system on your tank. One through eight compartment kits are available off the shelf. FloTech brand kits provide everything needed to make a professional installation. Systems include; FT0 monitor, FT sensor per compartment, FT0 cable and FT0 (0pcs.) strain reliefs. Sockets sold separately. Special length probes are available. Please refer to comparison chart on pages and for cross references to other manufacturer s model numbers. FT0 retain / overfi ll kit (top only) FT0 FT0 FT0 FT0 FT0 FT0 FT07 FT0 FT0- FT0- FT0- FT0- FT0- FT0- FT07- FT0- Checkmate, compartment system (top only) Checkmate, compartment system (top only) Checkmate, compartment system (top only) Checkmate, compartment system (top only) Checkmate, compartment system (top only) Checkmate, compartment system (top only) Checkmate, 7 compartment system (top only) Checkmate, compartment system (top only) Checkmate, compartment system (top only) - " probes Checkmate, compartment system (top only) - " probes Checkmate, compartment system (top only) - " probes Checkmate, compartment system (top only) - " probes Checkmate, compartment system (top only) - " probes Checkmate, compartment system (top only) - " probes Checkmate, 7 compartment system (top only) - " probes Checkmate, compartment system (top only) - " probes Checkmate Retain / Overfill Systems (retain and overfill) Systems include: FT0 monitor, FT overfi ll and FT retain sensor per compartment, FT0-0 cable and FT0 (0 pcs.) strain reliefs. Sockets sold separately. Special length probes are available. Please refer to comparison chart on pages and for cross references to other manufacturer model numbers. FT retain / overfi ll kit (retain and overfi ll) FT FT FT FT FT FT FT7 FT FT- FT- FT- FT- FT- FT- FT7- FT- Checkmate, compartment system (retain and overfi ll) Checkmate, compartment system (retain and overfi ll) Checkmate, compartment system (retain and overfi ll) Checkmate, compartment system (retain and overfi ll) Checkmate, compartment system (retain and overfi ll) Checkmate, compartment system (retain and overfi ll) Checkmate, 7 compartment system (retain and overfi ll) Checkmate, compartment system (retain and overfi ll) Checkmate, compartment system (retain and overfi ll) - " probes Checkmate, compartment system (retain and overfi ll) - " probes Checkmate, compartment system (retain and overfi ll) - " probes Checkmate, compartment system (retain and overfi ll) - " probes Checkmate, compartment system (retain and overfi ll) - " probes Checkmate, compartment system (retain and overfi ll) - " probes Checkmate, 7 compartment system (retain and overfi ll) - " probes Checkmate, compartment system (retain and overfi ll) - " probes Dixon Bayco 00

45 Overfi ll Products Checkmate Retain Overfill System -Wire Black and White FT0 Replacement Black and White -Wire Probes The FT0 thermo-optic wire probe is electronically and mechanically compatible for drop-in replacement of commonly used -wire probes with black and white wires. The FT0 provides the fast response and reliability of optic technology in a thermistor application. All FloTech brand probes come with a unique dual elastomer seal for prisms and a smooth tapered tip design for easy installation without gasket damage. Custom lengths available upon request. Compatible with the Scully Intellicheck system. FT0 FT0- FT0- FT replacement probe, thermo-optic, wire (black and white), 7" replacement probe, thermo-optic, wire (black and white), " replacement probe, thermo-optic, wire (black and white), " dummy (page 0) FT Thermo-Optic Sensors The FT thermo-optic sensor contains the FT0 probe and a " NPT housing. Our probe holder is cast aluminum with a " NPT mounting thread, heavy duty stainless steel hardware, and Viton probe seal. Install in a " NPT tapped hole or -/" hole using the gasket and locking nut provided. All screws and rings are heavy duty stainless steel for easy assembly and long life. Compatible with Scully Intellicheck monitors. FT FT- FT- sensor, thermo-optic, wire (black and white), " NPT housing with 7" probe sensor, thermo-optic, wire (black and white), " NPT housing with " probe sensor, thermo-optic, wire (black and white), " NPT housing with " probe FT Retain Sensor The FT retain sensor is a bottom retain detection sensor. The sensor has a ½" NPT mounting. Sensor is shipped with a ½" NPT weld-on aluminum half coupling for mounting. The main sensor portion is stainless steel to prevent galling in the trailer. The wiring box is plastic to prevent corrosion and is removable to facilitate installation. The side ports come out of the same side (like the overfi ll sensors) to make wiring easier. The FT is mechanically and electrically compatible with Scully model 09 and the Scully Intellicheck System. Our new three port housing design is compatible with previous inline and parallel dual port housings. FT Scully retain sensor, wire (black and white) FT0 Checkmate Retain / Overfill Monitor The FT0 Checkmate is compatible with the Scully brand black and white two-wire thermo-optic (thermistor) overfill and retain system. Components are drop-in replacement and compatible with the signal format required by the Scully Intellicheck brand on-board monitors. Easy to follow programming guide for a maximum of eight compartments, programmable for number of compartments, top only, top and bottom service with the same monitor. FT0 FT07 Checkmate monitor, programmable for top only, or top and bottom sensors, with housing Checkmate replacement monitor module FT0 probe FT sensor FT retain sensor FT0 monitor Bayco Petroleum Products Overfi ll Products/Replacement Parts Replacement Parts Index Dixon Bayco

46 Index Replacement Parts Overfi ll Products/Replacement Parts Bayco Petroleum Products Overfi ll Products R/OM Type Retain / Overfill System Red and Black -Wire These systems incorporate the preferred optic technology (red and black wire) using top overfi ll as well as bottom retain sensors. Retain sensors inform the terminal if the compartments are empty or if product has been retained. Monitors include advanced diagnostic capabilities as well as translation abilities for all socket types (optic, thermistor or fl oat). The system offers true load at any rack compatibility. Retain / Overfill System (top only) FloTech brand overfi ll system kits provide everything needed to install a new API compatible overfi ll system on your tank. One through six compartment kits are available off the shelf. Systems include: FT0P monitor, FT0 sensor per compartment, FT0 00' cable and FT0 (0 pcs.) strain reliefs. Sockets sold separately. Special length probes are available. Please refer to comparison chart on pages and for cross references to other manufacturer model numbers. FT0 retain / overfi ll kit (top only) FT0 FT0 FT0 FT0 FT0 FT0 FT0- FT0- FT0- FT0- FT0- FT0- R/OM type, compartment system (top only) R/OM type, compartment system (top only) R/OM type, compartment system (top only) R/OM type, compartment system (top only) R/OM type, compartment system (top only) R/OM type, compartment system (top only) R/OM type, compartment system (top only) - " probes R/OM type, compartment system (top only) - " probes R/OM type, compartment system (top only) - " probes R/OM type, compartment system (top only) - " probes R/OM type, compartment system (top only) - " probes R/OM type, compartment system (top only) - " probes Retain / Overfill Systems (retain and overfill) FloTech brand overfi ll system kits provide everything needed to install a new API compatible retain/overfi ll monitor top and bottom system. One through six compartment kits are available off the shelf. Systems include: FT0P monitor, FT0 sensor for each compartment, FT0 retain sensor per compartment, FT0 00' cable and FT0 (0 pcs.) strain reliefs. Sockets sold separately. Special length probes are available. Please refer to comparison chart on pages and for cross references to other manufacturer model numbers. FT00 retain / overfi ll kit (retain and overfi ll) FT00 FT00 FT00 FT00 FT00 FT00 FT00- FT00- FT00- FT00- FT00- FT00- R/OM type, compartment system (retain and overfill) R/OM type, compartment system (retain and overfill) R/OM type, compartment system (retain and overfill) R/OM type, compartment system (retain and overfill) R/OM type, compartment system (retain and overfill) R/OM type, compartment system (retain and overfill) R/OM type, compartment system (retain and overfill) - " probes R/OM type, compartment system (retain and overfill) - " probes R/OM type, compartment system (retain and overfill) - " probes R/OM type, compartment system (retain and overfill) - " probes R/OM type, compartment system (retain and overfill) - " probes R/OM type, compartment system (retain and overfill) - " probes Dixon Bayco 00

47 Overfi ll Products R/OM Type Retain / Overfill System Red and Black -Wire FT0 Replacement Probes The FT0 is a replacement probe for the FloTech brand FT0 sensor and is compatible with Civacon's 0 two wire optic probe. The FloTech brand FT00 series probe uses our unique dual elastomer seal prism design to prevent fouling. Other sensor designs use epoxy which crack allowing fuel to leak into the optic path ultimately causing signal malfunction. Custom lengths available upon request. FT0 FT0- FT0- replacement R/OM type, wire (red and black) top probe, 7" replacement R/OM type, wire (red and black) top probe, " replacement R/OM type, wire (red and black) top probe, " FT0 Sensors The FT0 sensor is a top overfi ll sensor and part of the FloTech brand retain/overfi ll monitoring system. The probe holder is cast aluminum with a " NPT mounting thread, heavy duty stainless steel hardware, and Viton seals. The FT0 is mechanically and electrically compatible with the Civacon model 00 two wire top sensor. The sensor is installed by threading it into a " NPT tapped hole or mounting it in a -/" hole secured by a gasket and metal locking nut. FT0 FT0- FT0- sensor R/OM type (red and black), top with " NPT housing, with 7" probe sensor R/OM type (red and black), top with " NPT housing, with " probe sensor R/OM type (red and black), top with " NPT housing, with " probe FT0 replacement probes FT0 sensor Bayco Petroleum Products Overfi ll Products/Replacement Parts FT0 Retain Sensor The FT0 retain sensor is a bottom retain detection sensor and part of the FloTech brand retain/ overfi ll monitoring system. The sensor has a ½" NPT mounting. Sensor comes with a ½" NPT weld-on aluminum half coupling for mounting. The main sensor portion is stainless steel to prevent galling in the trailer. The wiring box is plastic to prevent corrosion and is removable to facilitate installation. The side ports come out of the same side (like the overfi ll sensors) to make wiring easier. The FT0 is mechanically and electrically compatible with the Civacon model 000 two wire retain sensor. Our new three port housing design is compatible with previous inline and parallel dual port housings. FT0 FT0P Retain / Overfill Monitor The FT0P retain/overfi ll monitor is designed to diagnose and monitor up to six compartments. The FT0P monitor will provide API compatible optic, thermistor, and fl oat socket outputs for a true load at any rack compatibility. The FT0P is programmable to eliminate the need for a terminator in the probe string. FloTech's FT0P is a replacement chassis and is compatible with Civacon 0 and on-board monitors. FT0P FT0P FT0PSPEC retain sensor R/OM type (red and black), ½" NPT sensor R/OM type onboard monitor, with housing replacement chassis, R/OM type on-board R/OM replacement chassis with -hole cover and frame, no box FT0 retain sensor FT0P retain/overfi ll monitor Replacement Parts Index Dixon Bayco

48 Index Replacement Parts Overfi ll Products/Replacement Parts Bayco Petroleum Products Overfi ll Products API Optic System -Wire FloTech series FT00 and FT0 sensors are compatible with Scully brand wire optic sensors. FloTech API compatible overfi ll systems feature long service life and resistance to harsh environments typical on petroleum cargo tanks. Long service life and compatibility make FloTech the ideal choice for demanding cargo applications. optic overfi ll kit FT00 replacement probe FT0 sensor FT0 monitor Optic Overfill Kits FloTech brand overfi ll system kits provide everything needed to install a new API compatible overfi ll system on your tank. One through six compartment kits are available off the shelf. Systems include: FT0 monitor, FT0 sensor per compartment, FT00 00' cable and FT0 (0 pcs.) strain reliefs. Sockets sold separately. FT00 FT00 FT00 FT00 FT00 FT00 FT00- FT00- FT00- FT00- FT00- FT00- API compatible compartment system (optic) API compatible compartment system (optic) API compatible compartment system (optic) API compatible compartment system (optic) API compatible compartment system (optic) API compatible compartment system (optic) API compatible compartment system (optic) - " probe API compatible compartment system (optic) - " probe API compatible compartment system (optic) - " probe API compatible compartment system (optic) - " probe API compatible compartment system (optic) - " probe API compatible compartment system (optic) - " probe FT00 Replacement Probes The FT00 replacement probe is electronically and mechanically compatible with the API optic or wire signal format. The FT00 sensor features a dual prism seal design which is more reliable than other designs which glue in the prism using epoxies. Custom lengths are available upon request. The FT00 is compatible with Scully #090 and Civacon #00. FT00 FT00- FT00- wire API optic probe, 7" wire API optic probe, " wire API optic probe, " FT0 Sensors The FT0 sensor is compatible with the API optic or wire signal format. Our probe holder is cast aluminum with a " NPT mounting thread, heavy duty stainless steel hardware, and Viton seals. Install in a " NPT tapped hole or -/" hole using the provided gasket and locking nut. FT0 FT0- FT0- sensor, optic, wire, " NPT housing with 7" probe sensor, optic, wire, " NPT housing with " probe sensor, optic, wire, " NPT housing with " probe FT0 Monitor The FT0 API compatible monitor works with the FloTech API compatible sensor models FT0/00. This six channel monitor will provide API compatible optic, thermistor, and fl oat socket outputs for a true load at any rack compatibility. Entity approved by CSA and FM to ensure safety. The FT0 replacement chassis is compatible with Civacon 0 or Scully 0 on-board monitors. FT0 FT0 API compatible on-board monitor, with housing replacement chassis, API compatible Dixon Bayco 00

49 Overfi ll Products Stainless Steel Probes The Flotech Stainless Steel Probe are designed to be used with the harshest chemicals. All wetted services are stainless or Tefl on. These probes are designed to thread on DOT 07 " clean out nipple. Sensor length can be adjusted using ¾" NPT pipe nipples. FT00S FT0S FT9S stainless chemical sensor, wire optic probe 7" long, no housing stainless chemical sensor, wire optic probe 7" long, no housing stainless probe holder " NPSF housing Sockets Sockets allow the transfer of the electronic signal from the terminal control monitor to the tanker and return. Sockets will vary depending upon terminal equipment and regional regulations. Dixon Bayco offers a full line of sockets for North American and international requirements. FloTech brand sockets use a patented detachable nose ring that permits replacement without disconnecting wire connections (see image below). Please see pages and for socket J-slot and pin profi le drawings. mechanically and electronically compatible with API RP00 Rel. 00 bottom loading specifi cation hard coated aluminum alloy optic and thermistor socket face plates prevent J-slot wear stainless steel hardware and contact buttons prevent corrosion sockets are standard color coded permiting easy identifi cation (optic sockets = blue, thermistors = green, and fl oat = red), colored caps are included for optic and thermistor models Aluminum Hardcoat J-Slot Wear Ring Bayco Petroleum Products Overfi ll Products/Replacement Parts FT00 FT0 FT0 FT0 FT0 FT0 FT0 FT07 FT0 FT FT FT FT FT FT7 FT0 FT optic socket API / WOGA, pin and J-slots thermistor socket, API, pin and J-slots fl oat, API, J0 pin type socket optic socket, pin and J-slots (U.S.) thermistor socket, 0 pin and J-slots (Canada, Europe) thermistor socket, J0 pin type optic socket, J0 pin type optic socket, pin and J-slots (Canada) API optic face plate assembly, pin. -J slots API thermistor face plate assembly, pin, -J slots optic pattern contact assembly with thermistor, pin, -J slots thermistor face plate assembly (Canada/Europe), 0 pin -J slots thermistor replacement face plate, J0 type optic replacement face plate, J0 type optic pattern face plate assembly (Canada), pin, -J slots blue optic dust cap green thermistor dust cap FT00 optic socket FT0 thermistor socket FT0 fl oat socket Replacement Parts Index Dixon Bayco

50 Index Replacement Parts Overfi ll Products/Replacement Parts Bayco Petroleum Products FT90 FT90V FT9 FT9V FT90-0 FT90G FT90GT FT90T FT90G-0 FT9 FT9 FT9G [ FT9V-G FT9V-G FT9 FT9G FT9V FT90 FT9 Overfi ll Products Sockets EZ-Cept Dual Socket Assembly The EZ-Cept Dual API Socket Assembly has many features never before offered in an API socket. The EZ-Cept provides unprecedented durability, reliability and ease of installation. Guaranteed for Life J-Slots Our unique stainless steel alloy J-slot ring will probably outlast your trailer. The EZ-Cept dual socket includes the new guaranteed for life J-Slot wear ring. Pre-Wired and Ready To Go Installation is simple as the unit is provided pre-wired, tested and ready for installation. No more long hours wiring and troubleshooting your socket connections. Simply bolt to the trailer and connect to the onboard monitor. Ground Bolt and ID Chip Ready The EZ-Cept is ground bolt and ID chip ready. Both ground bolt and ID chip are normally mounted inside the EZ-Cept housing to protect from the corrosive elements. Or if desired, the bolt can be mounted to the trailer frame and the wire connected to the EZ-Cept internal wire terminal. Corrosion Resistant Hard powder coated housing, stainless steel hardware and contacts and our unique keep dry enclosure design keeps your trailer in service and corrosion at bay. Take a close look at FloTech EZ-Cept - we challenge you to fi nd a better constructed API socket on the market. Patented The EZ-Cept has so many innovative features it is covered by U.S. patent,,. Just another example of how FloTech is leading the way delivering reliability and innovation to our valued customers. J-slot, pin optic, and J-slot, 0 pin thermistor, horizontal mount, EZ-Cept dual socket assembly J-slot, pin optic, and J-slot, 0 pin thermistor, vertical mount, EZ-Cept dual socket assembly Canadian J-slot, pin optic, and J-slot, 0 pin thermistor, horizontal mount, EZ-Cept dual socket assembly Canadian J-slot, pin optic, and J-slot, 0 pin thermistor, vertical mount, EZ-Cept dual socket assembly J-slot, pin optic, and J-slot, 0 pin thermistor, horizontal mount, with 0' cable J-slot, pin optic, and J-slot, 0 pin thermistor, horizontal mount, with grounding bolt J-slot, pin optic, and J-slot, 0 pin thermistor, horizontal mount, with grounding bolt and T.I.M. J-slot, pin optic, and J-slot, 0 pin thermistor, horizontal mount, with T.I.M. chip J-slot, pin optic, and J-slot, 0 pin thermistor, horizontal mount, with grounding bolt and 0' cable J-slot, pin optic, and J-slot, 0 pin thermistor, assembly with J0 fl oat pin type socket thermistor socket with 0 pins and J-slots, optic socket with pins and J-slots and J0 optic socket thermistor socket with 0 pins and J-slots, optic socket with pins and J-slots and J0 optic socket with FT0 ground bolt thermistor socket with 0 pins and J-slots, optic socket with pins and J-slots, optic J0 socket with FT 0 ground bolt-vertical mount thermistor socket with 0 pins and J-slots, optic socket with pins and J-slots, optic J0 socket with FT0 ground bolt-vertical mount J-slot, pin optic, and J-slot, 0 pin thermistor assembly with optic J0 J-slot, pin optic, and J-slot, 0 pin thermistor assembly, with optic J0 and ground bolt J-slot, pin optic, and J-slot, thermistor assembly and an optic J0 with a vertical mount GFL (Guaranteed for Life *) Series Stainless Steel J-Slot Wear Ring GFL series stainless steel nose rings are now available on any confi guration socket that you require. Our stainless steel J-slots outlast competitor versions because they are tougher and more corrosion resistant than any other on the market. * GFL socket J-slots are so tough that they are "Guaranteed for Life" against wear U.S. patent,,. FT00SS FT0SS FT0SS FT0SS FT07SS FT0SS FTSS FTSS FTSS FT7SS optic socket API / WOGA, pin and J-slots GFL stainless wear ring thermistor socket, API, pin and J-slots GFL stainless wear ring optic socket, pin and J-slots (U.S.) GFL stainless wear ring thermistor socket, 0 pin and J-slots (Canada, Europe) GFL stain.wear ring optic socket, pin and J-slots (Canada) GFL stainless wear ring API optic face plate assembly, pin, J-slots GFL stainless wear ring API thermistor face plate assembly, pin, J-slots GFL stainless wear ring optic pattern face plate assembly with thermistor, pin, -J slots GFL stainless wear ring Thermistor face plate assembly (Canada/Europe), 0 pin, -J slots GFL stainless wear ring optic pattern face plate assembly (Canada), pin, J-slots GFL stainless wear ring Dixon Bayco 00

51 Overfi ll Products Cables and Strain Reliefs Cables are color matched to commonly used overfill systems and have a tough, thick outer jacket resistant to oil, UV and abrasion. For watertight cable/sensor connections apply FloTech brand strain/relief sealing glands. Two packages are available: FT0-0 pieces for typical top only sensor connection systems or; FT0-0 pieces for typical top and bottom sensor connection systems. FT00 FT00-00 FT FT0 FT0-0 FT0-000 FT0 FT0-0 FT0-000 FT0 FT0 FT0-00 Trailer Identification Module Chip Reader The model FT0 Trailer Identifi cation Module (T.I.M.) reader is designed to read and test Scully type T.I.M. modules mounted inside API compatible overfi ll sockets. reads Scully type T.I.M. modules backlit LCD display solid aluminum construction interchangeable optic or thermistor J-slot screws year battery minimum depending on use FT0 conductor cable 00' (for use w/ wire optic systems) conductor cable 00' conductor cable 000' reel 7 conductor cable 00' (for use w/r/om type systems) 7 conductor cable 0' 7 conductor cable 000' reel conductor cable 00' (for use w/checkmate system) conductor cable 0' conductor cable 000' reel 0 strain relief fittings, ½" NPT - one box of 0 pcs. 0 strain relief fittings, ½" NPT - one box of 0 pcs. strain relief fittings, ½" NPT, 00 piece box Optic System Tester cable and strain relief The FT0 optic test kit includes a Go, No/Go tester and test lead sets to test fi ve wire optic probes, two wire optic probes, and on-board monitor socket outputs. It uses the same permissive signal verifi cation as an optic rack monitor. Optional FT, FT, FT optic test plugs are available for an entire trailer Go, No/Go test. FT0 FT0CASE FT0WOGA FT0WOGACASE FT FT FT trailer identifi cation module chip reader optic system tester, test lead sets, instructions case only for FT0 optic system tester with FT test plug "no test leads" optional case for FT0 WOGA API optic test plug, six pins and three J-slots optic test plug, six pins, two or four J-slots optic test plug J-0 type FT0 optic system Bayco Petroleum Products Overfi ll Products/Replacement Parts Replacement Parts Index FT0WOGA optic system Dixon Bayco

52 Index Replacement Parts Overfi ll Products/Replacement Parts Bayco Petroleum Products FT00 and FT0 are compatible with API thermistor and optic confi gurations. cord available in coiled or straight lengths Cord features a heavy highly visible safety orange jacket to meet trip hazard requirements. Cord is bonded mechanically and has superior abrasion and oil resistance. Cord sets are interchangeable with Scully and Civacon, please refer to pages - for the cross reference chart. Overfi ll Products FT Dummy Dummies send a permissive signal for any missing compartments. For example, in the United States all overfi ll systems are formatted assuming a six compartment thermistor trailer. Therefore, the terminal controller must receive six permissive sensor signals to allow loading. One dummy can send up to fi ve signals. Consequently a one to fi ve compartment trailer will contain one FT dummy (wired to socket). In Canada, where eight channel systems are mandated, two FT dummies are needed with one to three compartment trailers and one FT for four to seven compartments. The FloTech FT thermistor dummy provides instant permissive signal in the coldest weather and is mechanically and electrically compatible with Scully and Civacon models. FT dummy Grounding Ball and Bolt API Compatible Rack Cords FT Thermistor dummy, compartment When using the FloTech trailer mounted ground ball the trailer cannot be loaded unless the terminal ground is directly connected to the ground ball. Please refer to comparison chart on pages and for cross references to other manufacturer model numbers. FT0 grounding bolt FT0 FT0S FT FT FT FT00 FT00C FT00S FT00SC FT0 FT0-0 FT0 FT0 FT0 Scully Scully FT grounding ball FT FT0 Model FT0 API Optic Assemblies Civacon 70SR 70 stainless steel grounding ball stainless steel grounding bolt Plug body is machined from 0 aluminum and is color coded optic blue or thermistor green. button contacts are made from stainless steel to prevent corrosion or galling all other hardware is stainless steel All wiring is compatible with standard Scully color codes and wiring number confi gurations. The 9 pin conductor is shielded to be compatible with Scully VIP system. plug with 0' coiled cable plug with 0' straight cable replacement plug body replacement 0' coiled cable plug hanger Model FT00 API Thermistor Assemblies Civacon plug with 0' coiled cable API thermistor plug and 0' coiled cord set (Canada) plug with 0' straight cable plug with 0' straight cord set (Canada) replacement plug body replacement plug, 0 pin (Canada) replacement 0' coiled cable plug hanger replacement 0' straight cord Dixon Bayco 00

53 FT9000 FT900 FT900 FT900 FT900 FT900 FT900 FT9007 FT900 FT9009 FT900 FT90 FT90 FT90 FT90 FT90 FT90 FT907 FT90 FT909 FT900 FT90 FT90 FT90 FT90 FT90 FT90 FT907 FT90 FT909 FT900 FT90 FT90 FT90 FT90 FT90 FT90 FT907 FT90 FT909 FT900 FT90 FT90 FT90 FT90 FT90 FT90 FT907 FT90 FT909 FT900 FT90 FT90 FT90 FT90 FT90 FT909 FT900 FT90 FT90 FT90 FT90 FT90 FT90 ] Overfi ll Products FloTech Replacement Parts sensor housing " NPT with parallel ports, complete with all hardware complete sensor housing gasket and O-ring kit complete sensor housing gasket, O-ring and hardware kit replacement on-board monitor housing replacement on-board monitor hardware kit replacement on-board bezel fi ve wire (FT0) replacement on-board bezel two wire (FT0) replacement socket rear housing replacement socket contact block with pins FT00 Optic series replacement socket contact block with pins FT0 Thermistor series replacement socket contact block with 0 pins FT0 Thermistor series replacement sensor housing cap with screws and lock washers replacement " NPT sensor housing lock nut replacement socket faceplate J slot, no contact block or hardware replacement contact block for Thermistor rack plug, pin, FT00 replacement contact block for Optic rack plug, pin, FT0 replacement contact block for Thermistor rack plug, 0 pin, FT00C rack plug body, only Thermistor green rack plug body, only Optic blue faceplate assembly to fi t small Scully Load anywhere housing socket pin, screw and crimp lug crimp connector 00 pieces per bag GE RTV 0 silicone rubber sealant. oz. tube stripping tool for cable jacket crimp tool for splice connections terminal pin, - AWG 00 pieces sensor fl at gasket for " NPT through punched hole in man lid sensor housing probe, Viton O-ring gasket for Scully Go Anywhere monitor face plate J0 contact block, 7 way fuse holder with ¼ Amp fuse fuse holder with ½ Amp fuse socket face plate gasket sensor housing, lower no hardware replacement socket face plate J slot, no contact block or hardware program module for FT0P and and FT0 FT0 Benzel FT0 test lead set fuse ¼ Amp - for FT0 and FT0P fuse ½ Amp - for FT0 Checkmate housing with lid replacement -J aluminum socket nose ring replacement -J aluminum socket nose ring replacement -J stainless socket nose ring replacement -J stainless socket nose ring replacement gasket, Checkmate lid bag of 0 replacement socket pins Thermistor, plug, hanger, dummy Thermistor, plug, hanger/dummy sensor cap O-ring Threaded half coupling ½" for retain probe replacement short contact block for FT90/9 Optic pin replacement short contact block for FT90/9 Thermistor, 0 pin replacement gasket for bezel on monitors FT0/0P replacement lid frame for monitors FT0/0P replacement hardware kit for FT0/ retain sensors replacement face plate and bezel assembly for FT0P replacement cord spring for FT00 and FT0 rack plugs replacement contact pin for FT90/9 series sockets nose ring assembly, therm, J, 0PIN contact block, pin, and hardware for FT90 & FT9 nose ring assembly, optic, J, PIN contact block, pin, and hardware for FT90 & FT9 bezel for FT0P-SPEC bezel gasket for FT0P-SPEC -socket head screws & - lock washers Bayco Petroleum Products Overfi ll Products/Replacement Parts Replacement Parts Index Dixon Bayco

54 Index Replacement Parts Overfi ll Products/Replacement Parts Bayco Petroleum Products LIQUID LEVEL SENSORS ON-BOARD MONITORS SOCKETS Overfi ll Products Comparison Reference Chart Listed is a cross reference between FloTech brand "drop in" replacement parts and competitor products Flotech FT00 FT00- FT0 FT0- FT0 FT0- FT FT- FT FT FT0 FT0- FT0 FT0- FT0 FT0 Flotech FT0 FT0 FT0P FT0P FT07 FT0 Flotech FT00 FT0 FT0 FT0 FT0 FT0 FT0 FT0 FT FT FT0 FT FT90 FT9 Cat. Pg # Cat. Pg # 7 7 Cat. Pg # Civacon 00 00S 0 0S 0S 0 0S 900 0S Civacon Civacon Scully & 0 Scully replacement probe, optic, -wire, 7" long replacement probe, optic, -wire, " long sensor, optic, -wire, " NPT housing, 7" probe sensor, optic, -wire, " NPT housing with " probe replacement probe, thermo-optic, 7" long, -wire (black and white) replacement probe, thermo-optic, " long, -wire (black and white) sensor, thermo-optic, " NPT housing, 7" probe, -wire (black and white) sensor, thermo-optic, " NPT housing," probe, -wire (black and white) retain sensor Thermistor dummy, compartment replacement R/OM type, 7" top probe, -wire (red and black) replacement R/OM type, " top probe, -wire (red and black) top sensor R/OM type, " NPT housing, 7" probe, -wire (red and black) top sensor R/OM type, " NPT housing," probe, -wire (red and black) terminator retain sensor R/OM type, ½" NPT sensor (red & black) 0 replacement chassis, API compatible 07 API compatible on-board monitor, with housing replacement chassis, R/OM type on-board monitor R/OM type on-board monitor, with housing 0900 or 09 Replacement module, Checkmate on-board monitor 0909 or 0907 Checkmate programmable monitor for top, or top and bottom sensors Scully API compatible optic socket with cap ( pin, J-slots) API compatible thermistor socket with cap ( pin, / J-slots) API compatible float socket optic pattern with thermistor J-slots, and cap ( pin, / J-slots) Canadian / European thermistor socket with cap (0 pin, J-slots) Thermistor socket, J0 type optic socket, J0 type API optic face plate assembly with cap API thermistor face plate assembly with cap Canadian / European thermistor replacement face plate with cap blue optic dust cap green thermistor dust cap EZ-Cept dual socket assembly EZ-Cept dual socket assembly Civacon and R/OM are registered trademarks of Civacon/Dover Corporation Viton is a registered trademark of DuPont Dow Elastomers Dixon Bayco 00

55 HARDWARE SYSTEM TESTERS API RACK CORDS Overfi ll Products Comparison Reference Chart Listed is a cross reference between FloTech brand "drop in" replacement parts and competitor products Flotech FT00 FT0 FT0 FT0 FT FT0 FT0 FT00 FT0 Flotech FT0 FT0S FT FT FT FT00 FT00S FT00SC FT0 FT0-0 FT0 FT0 FT0 Cat. Pg # Cat. Pg # Civacon GS Civacon 70 Scully Scully conductor cable 00' 7 conductor cable 00' 0 strain relief fi ttings, ½" NPT 0 strain relief fi ttings, ½" NPT stainless steel grounding ball stainless steel grounding bolt optic system tester API Thermistor "GREEN" plug with 0' coiled cord API Optic "BLUE" plug with 0' coiled cord plug with 0' coiled cable plug with 0' straight cable replacement plug body replacement 0' coiled cable plug hanger plug with 0' coiled cable plug with 0' straight cable plug with 0' straight cord set (Canada) replacement plug body replacement plug, 0 pin (Canada) replacement 0' coiled cable plug hanger replacement 0' straight cord Bayco Petroleum Products Overfi ll Products/Replacement Parts ON-BOARD SYSTEMS Flotech FT00 FT00 FT00 FT00 FT0 FT0 FT0 FT0 FT0 FT0 FT0 FT0 FT07 FT0 FT FT FT FT FT FT FT7 FT Cat. Pg # Civacon Scully API compatible compartment system API compatible compartment system R/OM type, compartment system R/OM type, compartment system R/OM type, compartment system (top only) R/OM type, compartment system (top only) Checkmate system, one compartment, top only Checkmate system, two compartment, top only Checkmate system, three compartment, top only Checkmate system, four compartment, top only Checkmate system, fi ve compartment, top only Checkmate system, six compartment, top only Checkmate system, seven compartment, top only Checkmate system, eight compartment, top only Checkmate system, one compartment, top and bottom sensors Checkmate system, two compartment, top and bottom sensors Checkmate system, three compartment, top and bottom sensors Checkmate system, four compartment, top and bottom sensors Checkmate system, fi ve compartment, top and bottom sensors Checkmate system, six compartment, top and bottom sensors Checkmate system, seven compartment, top and bottom sensors Checkmate system, eight compartment, top and bottom sensors Replacement Parts Index Civacon and R/OM are registered trademarks of Civacon/Dover Corporation Intellicheck is a registered trademark of Scully Signal Company Viton is a registered trademark of DuPont Dow Elastomers. Dixon Bayco

56 Index Replacement Parts Overfi ll Products/Replacement Parts Bayco Petroleum Products OPTIC SOCKET FT0 optic socket (USA) FT replacement faceplate FT07 optic socket (Eastern Canada) FT7 replacement faceplate FT0 fl oat J0 socket FT replacement faceplate fl oat J0 socket FT0 Thermistor J0 socket FT replacement faceplate Thermistor J0 socket FT0 optic J0 socket (Western Canada) FT replacement optic J0 socket Overfi ll Products Socket Profiles API THERMISTOR SOCKET FT0 API thermistor socket USA FT replacement faceplate Assembly API OPTIC SOCKET FT00 API optic socket FT0 replacement faceplate THERMISTOR SOCKET FT0 thermistor socket (Canada) FT replacement faceplate Dixon Bayco 00

57 API OPTIC SOCKET FT90 dual socket OPTIC SOCKET FT9 dual socket (Canada) Overfi ll Products Socket Profiles THERMISTOR SOCKET THERMISTOR SOCKET Bayco Petroleum Products Overfi ll Products/Replacement Parts OPTIC SOCKET THERMISTOR SOCKET OPTIC FT9 triple socket (Canada) OPTIC SOCKET THERMISTOR SOCKET API Float Replacement Parts Index FT9 triple socket Dixon Bayco

58 Index Petroleum Replacement Parts FloTech Overfill Products Bayco Petroleum Products Repair Kits 0K 0KV 0K 0K 0K 0K7 0K 0K9 0K 0K 0K Replacement Parts 0 Series, API Bottom Load Valves complete rebuild kit: Baylast O-rings, bearings complete rebuild kit: Viton poppet O-ring, Baylast O-rings, bearings replacement anodized nose ring with Baylast gasket, screws and lock washers replacement detachable handle assembly (for 0C and 0NGC) Tefl on encapsulated seal kit, poppet O-ring, nose O-ring, shaft O-ring, and sight glass O-ring replacement fi xed handle assembly sight glass repair kit sight glass cover kit (to convert units with sight glass to non-sight glass) nose ring replacement hex bolts & washers kit sight glass replacement hardware, hex bolts, lock washers and washers kit replacement full body sight glass, seals and retainer kit Includes Item #,0,,, A, 7A, A, A, 0,,0,,, B, 7B, B, B, 0,, 7A,, not illustrated C, 7B, B, B, A,, 7, 9,, A,, 7 not illustrated,,,, 9, Dixon Bayco 00

59 Bill of Materials 7 A B 9A 9B 0 A B C 7A 7B A B 9 0 A B 7 A B * 9 * 0 * Replacement Parts Quantity of Components per Unit Part# 0 0NG 0TNG 0SNG 0NGV 0C 0NGC 0L 0LNG body - pipe end nose ring shaft handle pin shaft spacer shaft bearing stop pin fi xed handle removeable handle poppet (Load/Unload versions) poppet (Load only versions) poppet bearing cam sight glass poppet roller poppet roller bearing retaining ring Baylast poppet O-ring Viton poppet O-ring Tefl on encapsulated poppet O-ring nose ring O-ring Tefl on nose O-ring shaft O-ring Tefl on shaft O-ring shaft and cam roll pin pin roller grease fi tting sight glass screw nose ring screw Baylast sight glass O-ring Tefl on sight glass O-ring washer cotter pin main spring-steel main spring- stainless steel handle spring dust seal O-ring lock washer / handle shaft spring washer handle shaft washer back-up ring u-cup seal fl ow indicator fl oat ball retaining ring SFI sight glass SFI sight glass O-ring (Baylast ) use kit 0K SP use kit 0K7 use kit 0K use kit 0K K 0KV use kit 0K use kit 0K use kit 0K 000- use kit 0K use kit 0K use kit 0K use kit 0K use kit 0K use kit 0K use kit 0K use kit 0K use kit 0K * not illustrated, parts for 0-SFI = Not Applicable 0 Series, API Bottom Load Valves Bayco Petroleum Products FloTech Overfill Products Petroleum Replacement Parts Index Dixon Bayco

60 Index Petroleum Replacement Parts FloTech Overfill Products Bayco Petroleum Products Replacement Parts 000- API Dust Cap Bill of Materials Item # Qty A B 000- API Dust Cap 0 API Dust Cap 7 body cam arm and ring cam arm pin Baylast O-ring (standard) Viton O-ring (optional) replacement " chain and S hook ACARBZ L RK Repair Kits Item # 00RK 00RK-V 0-RK replacement cam arms, pins and Baylast O-ring seal (standard) replacement cam arms, pins and Viton O-ring seal (optional) replacement " chain and S hook,, A,, B Bill of Materials Item # Qty gasket cam arm sub assembly 000-RK 077STBR Bill of Materials Item # Qty 7 body slotted pin roller gasket S hook " chain spring pin plastic cam arm use kit 0-RK use kit 0-RK 0-RK use kit 0-RK use kit 0-RK use kit 0-RK use kit 0-RK Repair Kits Item # 0-RK 0-RK 0-RK 0-RK gasket replacement kit replacement cam arm and pin replacement roller and pin replacement chain and S hook 7,,, Dixon Bayco 00

61 Bill of Materials Replacement Parts 0 and 0 Series Gravity Drop Adapter Item # Qty A B body Baylast O-ring (standard) Viton O-ring (standard) cam arm and ring cam pin replacement " chain and S hook ACARBZ L9-0-RK Repair Kits Includes Item # s 00RK 00RK-V 0-RK cam arms, rings, pins & Baylast O-ring (standard) cam arms, rings, pins and Viton O-ring (standard) " security chain A,, B,, - 0SG and 0SG (with Sight Glass) Gravity Drop Adapters Bayco Petroleum Products FloTech Overfill Products Bill of Materials Item # Qty 7 9 Repair Kits body cam arm pin Baylast O-ring retaining ring Baylast main gasket S hook sight glass " chain cam arm and ring L SG-RK use kit 0-RK use kit 0SG-RK use kit 0-RK ACARBZ 0SG-RK sight glass repair kit (fi ts " and ") 0SG-RK Baylast main gasket (fi ts " and ") 0SG-RK-V Viton main gasket (fi ts " and ") 0SG-RK replacement cam arms and pins (fi ts " and ") 0-RK replacement chain & "S" hook Includes Item #,, 7 A B, 9, 9 7 Petroleum Replacement Parts Index Dixon Bayco

62 Index Petroleum Replacement Parts FloTech Overfill Products Bayco Petroleum Products Replacement Parts 00 Series Piece Gravity Drop Adapters 00 Main Body Inlet Repair Kits 00RK replacement cam arms, rings, pins and Baylast O-ring (standard) 00RK-V replacement cam arms, rings, pins and Viton O-ring (optional) 00 Series Drop Adapter Outlets 0, 0, 0 and 0 Bill of Materials Item # Qty A B body cam arm and ring Baylast O-ring (standard) Viton O-ring (optional) cam arm pin rivet ACARBZ L9-90 A B not illustrated not illustrated not illustrated Repair Kits 00SGK 00SGK-V 0SGK 0SGK-V body sight glass Baylast gasket Viton gasket stainless bolt stainless washer coupler gasket for 0 cam arm and ring for 0 cam arm pin for 0 replacement sight glass and Baylast gaskets for 0 and 0 replacement sight glass and Viton gaskets for 0 and 0 replacement sight glass and Baylast gaskets for 0 and 0 replacement sight glass and Viton gaskets for 0 and 0 Includes Item #, A,, B, Bill of Materials Item # Qty see below 7 WASHER.7-SS 00-G-BU ACARBZ L9- Includes Item #, A, B, A, B Dixon Bayco 00

63 Bill of Materials Item # Qty body bushing bronze left arm seal housing bronze plug lug bronze sleeve shaft bronze handle handle sleeve shaft bushing washer spring washer nut hex Viton O-ring Viton seal washer dowel pin wave spring bolt stainless steel handle pin Replacement Parts 00 Series Faucet Valves use kit 9 use kit 0 use kit 0 use kit 0 use kit 9 use kit use kit use kit use kit 0 use kit 0 0 use kit 0 use kit 0 use kit use kit 0 0 use kit 0 use kit 0 use kit Bayco Petroleum Products FloTech Overfill Products Repair Kits SGK 00SGK-V 00-G-BU 00-G-VI ACARBZ L9-9 replacement fl apper assembly replacement handle assembly replacement shaft sleeve assembly replacement plug shaft assembly replacement shaft assembly replacement sight glass and Buna gaskets for 0, 0A, 0S and 0- replacement sight glass and Viton gaskets for 0, 0A, 0S and 0- replacement Buna coupler gasket for 0- replacement Viton coupler gasket for 0- replacement cam arm and ring for 0- ( required) replacement cam arm pin for 0- ( required) Includes Item #,,,,,, 7, 9, 0 7,,,, 0 9, not illustrated not illustrated not illustrated not illustrated not illustrated not illustrated Petroleum Replacement Parts Index Dixon Bayco

64 Index Petroleum Replacement Parts FloTech Overfill Products Bayco Petroleum Products 000- Replacement Parts 00-SFI Series, Sight Glass Repair Kits 00-SFI--RK 00-SFI-V-RK 00-SFI-RK 00-SFIV-RK Drop Elbow Inlets Bill of Materials Item # body sight glass A " Baylast O-ring (" std) B " Viton O-ring (" optional) C " Baylast O-ring (" std) D " Viton O-ring (" optional) A " retainer ring B " retaining ring Fits 000, 00, and 00 Series Elbows 000- and 000- Female Coupler Inlets Bill of Materials Item # A B A B Repair Kits see repair kit below see repair kit below see repair kit below see repair kit below see repair kit below see repair kit below see repair kit below " replacement sight glass, Baylast O-ring and retainer ring kit " replacement sight glass, Viton O-ring and retainer ring kit " replacement sight glass, Baylast O-ring and retainer ring kit " replacement sight glass, Viton O-ring and retainer ring kit body cam arm and ring " cam arm pin " cam arm pin " gasket (000-) " gasket (000-) hex screw lock washer 000NPHK replacement hex screws and lockwashers ACARBZ L9- L G-BU 00-G-BU use kit 000NPHK use kit 000NPHK Qty Includes Item #, A, A, B, A, C, B, D, B Qty Includes Item #, Dixon Bayco 00

65 Bill of Materials Item # A B Repair Kits 00SGK 000EHK body Baylast gasket Viton gasket (optional) lock washer bolt sight glass Bill of Materials Item # Repair Kits 00- use kit 000EHK use kit 000EHK use kit 00SGK replacement sight glass and Baylast seal replacement bolts and washers body small bushing large bushing handle stem main gasket spring O-ring grease nipple right arm left arm handle handle pin pin Replacement Parts Top "D" Handle Elbow Qty Includes Item #,, Bottom Unit, for "D" Handle Elbows 000- use kit 00BK use kit 00BK AS NIPPLE/ use kit 00ARK use kit 00ARK complete replacement bottom unit 00ARK replacement L and R arms, main gasket, O-rings, small and large bushings 00BK replacement () small & () large bushings Fits 000 Elbow Only Fits 000, 0 and 0 Qty Includes Item # all,,, 7, 9, 0, Bayco Petroleum Products FloTech Overfill Products Petroleum Replacement Parts Index Dixon Bayco

66 Index Petroleum Replacement Parts FloTech Overfill Products Bayco Petroleum Products Replacement Parts Top Side Lever Elbow Fits 00 Elbow Only Bill of Materials Item # 7 A B 9 0 Repair Kits 00SGK 000EHK 00-ASSM 00SHK body pin handle handle linkage stud washer hex nut Baylast gasket Viton gasket (optional) lock washer bolt sight glass bushing Bottom Unit, for Side Lever Elbows Fits 00, 00 and 00 Standard and Tall Elbows 00- PIN/X /-P use kit 00-ASSM use kit 00-ASSM use kit 00SHK use kit 00SHK use kit 00SHK use kit 000EHK use kit 000EHK use kit 00SGK use kit 00SHK replacement sight glass and Baylast seals replacement bolts and washers replacement handle, lever and pin replacement pivot stud, bushing, washer and lock nut Bill of Materials Item # A B body small bushing large bushing handle stem (standard) handle stem (tall) main gasket spring O-ring grease nipple right arm left arm pin 000- use kit 00BK use kit 00BK X AS NIPPLE/ use kit 00ARK use kit 00ARK PIN/X /-P Repair Kits 0 complete standard replacement bottom unit 0X complete tall replacement bottom unit 00ARK replacement L and R arms, main gasket, 00BK O-rings, small and large bushings replacement small and large bushings Qty Includes Item #, 9, 0,,,, 7, Qty Includes Item # all all,,, 7, 9, 0, Dixon Bayco 00

67 Bill of Materials Item # 7 9A 9B 0 Repair Kits 00SGK 000EHK 00-RK 00AHK 00SHK body mounting plate lower lever pin upper lever pin plate screw washer handle linkage Baylast gasket Viton gasket (optional) sight glass locking latch lock nut bushing screw bolt lock washer Bill of Materials replacement sight glass and Baylast seals replacement bolts, washers replacement handle, linkage, lock latch, nut, bushing, pins replacement mounting plate, screws and lock washers replacement pivot stud, bushing, washer and lock nut Replacement Parts 0 and 0 Series Straight Drop Fitting Item # A B complete bottom unit " straight adapter " straight adapter washer lock washer bolt 00 (") and (") AS use kit 000EHK use kit 000EHK Elbow Hardware Kit 000EHK lock washer, bolt * Note: Parts list on page. 709 use kit 00AHK use kit 00-RK use kit 00-RK use kit 00SGK use kit 00-RK use kit 000EHK use kit 000EHK Top Side Lever Elbow Fits 00 Elbow Only 9A, 0 Includes Item #,,,,,, 7,,,,,,,, Qty,, 7,,,,, 0 (" inlet), 0 (" inlet) Qty Includes Item #s, Bayco Petroleum Products FloTech Overfill Products Petroleum Replacement Parts Index Dixon Bayco

68 Index Petroleum Replacement Parts FloTech Overfill Products Bayco Petroleum Products Replacement Parts 00 Series Co-axial Drop Elbow with " Male Vapor Outlet 00 (" male inlet), 00F (" female inlet), 0 (" male inlet), 0F (" female inlet) Bill of Materials Item # Qty 7 7A A 0B 0C 0D A B Inlet Adapter and Coupler Kits Includes Item # 000-C 000-C 000-C 000-7C " coupler inlet kit " coupler inlet kit " adapter inlet kit " adapter inlet kit 0B, A, B 0D, A, B 0A, A, B 0C, A, B Repair Kits 0 0X Includes Item # complete standard replacement bottom unit complete tall replacement bottom unit 00ARK bottom body right arm large bushing small bushing tube U cup seal tube lever stem (standard) lever stem (tall) left arm main gasket grease nipple stem spring O-ring tube O-ring stem pin set screw lock washer bolt linkage pivot stud pivot bushing washer pivot lock nut handle pin handle top co-axial elbow body " vapor adapter outlet vapor adapter bolt " adapter fuel inlet (00) " coupler fuel inlet (00F) " adapter fuel inlet (0) " coupler fuel inlet (0F) inlet bolt inlet bolt lock washer inlet O-ring sight glass inlet bolt spacer vapor adapter O-ring 00BK 00SGK 00-ASSM 000EHK 00DTK 00SH 000- use kit 00ARK use kit 00BK use kit 00BK U-CUP-/7 use kit 00DTK X use kit 00ARK NIPPLE/ 0 AS O-RING#9 PIN/X /-P SC/NCX/ use kit 000EHK use kit 000EHK use kit 00-ASSM use kit 00SHK use kit 00SHK use kit 00SHK use kit 00SHK PIN/X /-P use kit 00-ASSM use kit 000-7C use kit 000-C use kit 000-C use kit 000-C SC/-X.P 7 AS use kit 00SGK CA- 00 replacement L & R arms, main gasket, O-rings, small & large bushings replacement small & large bushings replacement sight glass and seal replacement handle, lever and pin replacement bolts and washers replacement tube,o-ring & U cup seal replacement pivot stud, bushing, washer and lock nut,,,, 7,, 9, 0,,,,,,, 7,, 9, 0,,,,,,,, 9,,,,,,, 7,, 9, 0,, Dixon Bayco 00

69 Bill of Materials Item # body coupler arm lip seal spring pin retaining ring use kit 000SSHK L7 L L TRUARC-00- Repair Kit 00SSHK Bill of Materials Item # bottom body top body sight glass A Baylast seal B Viton seal bolt lock washer 7 retaining ring pin 9 spring 0 lip seal arm O-ring Repair Kits replacement arms, springs, pins and retaining rings 000ASK replacement lip seal and body O-ring 00AS complete replacement bottom unit 00SGK replacement sight glass and Baylast seals 000EHK replacement lock washers and bolts 000SSHK replacement arms, springs, pinsand reataining rings 000ASR arm lock ring Replacement Parts 000-SSA Series " Side Seal Adapter 000AS Series Side Seal Elbow 000AS- 00- use kit 00SGK use kit 000EHK use kit 000EHK TRUARC-00- L L L7 use kit 000SSHK AS Includes Item #s 0,, 7,, 9, 0,,,, 7,, 9, not illustrated Qty Includes Item #s,,, Qty Bayco Petroleum Products FloTech Overfill Products Petroleum Replacement Parts Index Dixon Bayco

70 Index Petroleum Replacement Parts FloTech Overfill Products Bayco Petroleum Products Replacement Parts VR00 Series Vapor Elbows Bill of Materials Item # Qty Repair Kits VR00SPHK VR00SPK VR00CAK 000NPHK 0 body cam handle seal side plate bar outlet adapter & O-ring side plate bolt side plate lock washer side plate fl at washer poppet bushing Viton poppet seal grooved pin.x. SS groove pin.x SS poppet valve stand off poppet spring poppet valve outlet lock washer outlet adapter bolt outlet O-ring use kit VR00CAK 0 use kit VR00SPK use kit VR00SPK VR000- use kit VR00SPHK use kit VR00SPHK use kit VR00SPHK VR000- O-RING-AS- use kit VR00CAK use kit VR00CAK VR000- L0-L7 VR000- use kit 000NPHK use kit 000NPHK 09 replacement bolt and washer kit for side plates replacement side plates, bar, bolts and washers kit replacement () cam and pin kit adapter hardware kit () bolts and lock washers replacement seals Includes Item #s, 9, 0,,, 9, 0,,, Dixon Bayco 00

71 Bill of Materials Item # A 7B bottom body top elbow body bolt lock washer poppet bushing (VR00) poppet spring (VR00) stem pin pivot stud pivot bushing pivot washer pivot lock nut Viton poppet seal (VR00) poppet valve (VR00) poppet valve stand off (VR00) outlet adapter bolt outlet adapter and O-ring outlet O-ring lock washer handle handle pin handle linkage stem pin body O-ring stem spring grease nipple main seal gasket left arm stem probe small bushing large bushing right arm Replacement Parts VR00 Series Vapor Elbows VR000- VR000- use kit 000EHK use kit 000EHK VR000- L0-L7 PIN/X /-P use kit 00SHK use kit 00SHK use kit 00SHK use kit 00SHK O-RING-AS- VR000- VR000- use kit 000NPHK VR use kit 000NPHK use kit 00-ASSM PIN/X /-P use kit 00-ASSM PIN/X /-P AS 0 NIPPLE/ VR VR000-7 use kit 00BK use kit 00BK VR000- Qty Repair Kits Includes Item #s VR0 complete replacement bottom unit 00BK 000EHK 00SHK 000NPHK 00-ASSM replacement small () and large () bushing kit replacement body lock washers and bolts replacement pivot stud, bushing, washers & lock nut adapter kit bolts () and lock washers replacement handle, linkage and pin,,,,,, 7,, 9, 0,, 0,,, 9, 0,, 9, 0, Bayco Petroleum Products FloTech Overfill Products Petroleum Replacement Parts Index Dixon Bayco

72 Index Petroleum Replacement Parts FloTech Overfill Products Bayco Petroleum Products Replacement Parts VR00 Series Vapor Elbows Bill of Materials Item # Qty Repair Kits VR000RK 000EHK 000NPHK complete bottom body handle assembly body bolt body lock washer elbow body poppet valve poppet valve stand off poppet bushing Viton O-ring poppet spring outlet adapter & O-ring outlet O-ring outlet adapter bolt outlet lock washer lower lever pin side plate lock washer side plate bolt VR0 use kit VR00RK use kit 000EHK use kit 000EHK VR000- VR000- VR000- O-RING-AS- L0-L7 VR use kit 000NPHK use kit 000NPHK replacement handle, linkage, mounting plate, bolt, nut, bushing and pins replacement () body bolts and washers adapter hardware kit () bolts and lock washers Includes Item #s,, Dixon Bayco 00

73 Bill of Materials Item # Repair Kits 00BK 000EHK 000NPHK bottom body small bushing large bushing handle stem main seal gasket spring O-ring grease nipple right arm left arm D-handle D-handle pin spring pin probe elbow body outlet adapter & O-ring outlet O-ring (only) body lock washer outlet adapter bolt body hex bolt outlet adapter lock washer replacement small () and large () large bushing kit replacement body lock washers and bolts adapter kit bolts () and lock washers complete replacement bottom unit fl ange seal plate rack spur gear bridge spring O-ring push rod swivel pin pin slotted screw screw washer retaining ring Replacement Parts VR000NP Series Vapor Elbows VR000- use kit 00BK use kit 00BK AS NIPPLE/ VR000- VR VR000-7 VR000- VR use kit 00EHK use kit 000NPHK use kit 00EHK use kit 000NPHK Includes Item #s,, 0 9, Qty,,,,,, 7,, 9, 0,,,, VR00N Series " Inward Opening Vapor Vent Bill of Materials Item # Qty VR00- VR00- VR00-7 VR00- VR00- VR00- VR VR Bayco Petroleum Products FloTech Overfill Products Petroleum Replacement Parts Index Dixon Bayco

74 Index Petroleum Replacement Parts FloTech Overfill Products Bayco Petroleum Products Replacement Parts VR00SQ Series Bill of Materials Item # Qty 7 9 0A 0B A B stem piston retaining ring bearing hitch pin spring bearing seal washer top lip seal bottom lip seal mounting ring mounting ring set screw O-ring body poppet Baylast poppet gasket Viton poppet gasket pipe plug 00 use kit VR00RK VR00RK VR00RKV 9 VR00 Repair Kits VR00RK VR00RKV VR00RK VR00RK VR00RKV VR0Q Series replacement seal kit (with Baylast poppet seal) replacement seal kit (with Viton poppet seal) replacement piston assembly replacement Baylast poppet gasket replacement Viton poppet gasket Includes Item #,,,, 9,, A,,,, 9,, B,, 9 Bill of Materials Item # Qty 7 9A 9B 0 stem assembly piston retaining ring cotter pin spring bearing seal washer lip seal lip seal Baylast poppet gasket Viton poppet gasket poppet hex bolt body gasket lock washer stem bearing body 00 use kit VR00RK VR0RK VR0RKV use kit VR0RK 9 use kit VR0RK 90 VR0 Repair Kits Includes Item # VR0RK VR0RKV VR0RK VR0RK VR0RKV VR0RK replacement seal kit (with Baylast poppet seal) replacement seal kit (with Viton poppet seal) replacement piston assembly replacement Baylast poppet gasket replacement Viton poppet gasket replacement () bolts & lock washers,,, 7,, 9A,,,, 7,, 9B,, 7, 9A 9B, Dixon Bayco 00

75 Bill of Materials Item # A B 7 9 Replacement Parts VRP00 and VRP00 Series Outbreathing Vent body gasket base gasket bushing spring retainer shaft for VRP00 shaft for VRP00 shaft pin spring screw VRP00- VRV0- VRP00- VRV0- VRP SPRG-L0 SC-NCx.7FSS Qty VRV0 Series Inbreathing Vent Bayco Petroleum Products FloTech Overfill Products Bill of Materials Item # Qty 7 9 body gasket base gasket bushing spring retainer shaft pin spring screw VRV0- VRV0- VRV0- VRV0- VRV0-077 SPRG-L0 SC-NCx.7FSS Petroleum Replacement Parts Index Dixon Bayco

76 Index Petroleum Replacement Parts FloTech Overfill Products Bayco Petroleum Products Replacement Parts VR00CS-AL Vapor Hose Coupler " x " with poppet VR00CS-NP Vapor Hose Coupler Bill of Materials Item # Qty body cam arm and ring cam arm pin Buna coupler gasket probe ACARBZ L G-BU VR00CS- VRC000AL Vapor Hose Coupler Bill of Materials Item # Qty body cam arm and ring cam pin Buna coupler gasket probe Viton valve O-ring spring bushing valve valve plate ACARBZ L G-BU VR000-7 O-RING-AS- SPRG/L VR000- VR00CS- VR00CS- Arm and Seal Repair Kit VAC00RK " x " without poppet " x " replacement cam arms, rings, pins, coupler gasket and valve O-ring Includes Item #s,,, Bill of Materials Item # Qty body probe cam arm and ring Buna coupler gasket cam arm pin L7 ACARBZ 00-G-BU L Dixon Bayco 00

77 Bill of Materials Item # Qty body valve valve standoff valve O-ring spring bushing sight glass sight glass O-ring retaining ring plug valve plate valve plate screws VR000- VR000- O-RING-AS9-V SPRG/L VR000- VR000- O-RING# RING-VH- 07 VR000- SC07-SS Bill of Materials Item # Qty 7 body valve bushing Viton O-ring valve plate screw valve spring VR00- VR000- O-RING-AS- VR00- SC-NCX.7FSS SPRING-L Replacement Parts VR000 Series Vapor Hose Valve VR00 Series " Vapor Hose Valve Bayco Petroleum Products FloTech Overfill Products Repair Kit VR00RK valve, bushing, O-ring, valve plate, screw, and spring Includes Item #s,,,,, 7 Petroleum Replacement Parts Index Dixon Bayco

78 Index Petroleum Replacement Parts FloTech Overfill Products Bayco Petroleum Products Replacement Parts VR00F Series Vapor Hose Valve Bill of Materials Item # Qty body sight glass sight glass bolts sight glass washer sight glass lock washer sight glass O-ring sight glass float ball ¾" body plug valve bushing Viton valve O-ring valve spring screw valve plate VR00- VR000- O-RING-AS- SPRING-L SC-NCX.7FSS VR00- Repair Kits 0K sight glass, O-ring, float ball 0K hex bolts (), lock washers (), washers () kit VR0 Series Vapor Adapter Includes Item #s,, 7,, Bill of Materials Item # Qty body valve valve spider spring Viton O-ring body gasket O-RING-AS- G000AS Dixon Bayco 00

79 Repair Kits TDFRK TDF7RK SPRG-A0 Replacement Parts TDF Series Tube Doors " and repair kit, includes stainless steel spring, bushings and pin 7" repair kit, includes stainless steel spring, bushings, pin and washer replacement stainless steel spring only 000AIR Series Roller Ball End Air Interlock Valve Bill of Materials Item # Qty body piston end plug Buna O-ring spring urethane wiper retaining ring mounting bolts lock washer roller ball assembly use kit 000AISK use kit 000AISK use kit 000AISK use kit 000AISK use kit 000AISK RING-WH-0 use kit 000AIHK use kit 000AIHK 000AIRRK Bayco Petroleum Products FloTech Overfill Products Repair Kits Includes Item #s 000AIHK replacement mounting bolts, 9 and lock washers 000AISK replacement piston and seal,,,, kit 000AIRRK replacement roller ball 0 Petroleum Replacement Parts Index Dixon Bayco

80 Index Petroleum Replacement Parts FloTech Overfill Products Bayco Petroleum Products Replacement Parts 000AIV Series Paddle End Air Interlock Valve 000AI Series Button Plunger End Air Interlock Valve 000AI, 000AIS and AIST Bill of Materials Item # Qty body piston end plug Buna O-ring spring urethane wiper retaining ring mounting bolt lock washer paddle nut paddle plunger paddle plunger stud use kit 000AISK use kit 000AISK use kit 000AISK use kit 000AISK use kit 000AISK RING-WH-0 use kit 000AIHK use kit 000AIHK 00-7E 000AI- 000AI- Repair Kits 000AIHK 000AISK Bill of Materials Item # Qty A B use kit 000AISK use kit 000AISK 000S A B mounting bolt, lock washer piston, end plug, spring, O-ring, rod wiper body piston end plug (000AI, 000AIST electronic switch kit (not illustrated, for 000AIS) Buna O-ring spring urethane wiper retaining ring mounting bolt lock washer plunger nut " SS plunger button (000AI) ½" SS plunger button (000AIST) Includes Item #s, 9,,,, use kit 000AISK use kit 000AISK use kit 000AISK RING-WH-0 use kit 000AIHK use kit 000AIHK NUT.HX-SS use kit 000AIRK use kit 000ST Repair Kits Includes Item #s 000AIHK 000AISK 000AIRK 000ST 000S mounting bolt, lock washer piston, end plug, spring, O-ring, rod wiper plunger end, nut replacement ½" plunger button and nut electronic switch attachment kit, 9, A,,, 0, A 0, B B Dixon Bayco 00

81 7 9 0 Repair Kits DSK A B /D-TK DAL-AV-9 Replacement Parts D and DNS (½") Bulk Delivery Nozzles Bill of Materials Item # Qty body main poppet assembly secondary poppet assembly poppet spring Buna cap O-ring bronze cap valve stem assembly trigger trigger bushing trigger pin trigger cotter pin ratchet plate ratchet plate screws spout main poppet, nd poppet, cap O-ring, valve stem ½" aluminum spout ½" brass spout (optional) trigger, pin, cotter pin, bushing blank plate to replace ratchet plate if ratchet not required (optional) use kit DSK use kit DSK SPRG-L O-RING# DAL-9 use kit DSK use kit /D-TK DAL-0 PIN-L9-SS A Includes Item #s,,, 7, 9, 0, Bayco Petroleum Products FloTech Overfill Products D and DNS (¼") Bulk Delivery Nozzles Bill of Materials Item # Qty body main poppet assembly use kit DSK secondary poppet assembly use kit DSK poppet spring SPRG-L Buna cap O-ring O-RING-AS-9 bronze cap DAL- 7 valve stem assembly use kit DSK trigger use kit /D-TK 9 trigger bushing DAL-0 0 trigger pin PIN-L9-SS trigger cotter pin 07 ratchet plate 0 ratchet plate screws 079 aluminum spout A sleeve stem packing SLVL- valve stem guide & O-ring use kit DSK 7 valve stem O-ring O-RING-AS0 valve stem packing STEMPACK-L0 9 valve stem nut NUTL7-7 Repair Kits Includes Item #s DSK /D-TK A B DAL-AV-9 main and secondary poppets, cap O-ring, valve stem assembly and packing, sleeve stem packing and nut replacement trigger, pin, bushing & cotter pin replacement aluminum spout optional brass spout optional blank plate to replace ratchet plate, if ratchet not desired,,, 7,,, 7,, 9, 9, 0, replaces replaces Petroleum Replacement Parts Index Dixon Bayco

82 Index Petroleum Replacement Parts FloTech Overfill Products Bayco Petroleum Products Bill of Materials Replacement Parts DAV Over Wing, Aviation Nozzles Item # Qty A B A B A B 7A 7B body main poppet assembly second poppet assembly poppet spring Buna cap O-ring bronze cap valve stem valve stem guide & O-ring valve stem packing sleeve stem packing valve stem nut trigger trigger bushing trigger pin cotter pin base plate trigger spacer trigger spacer screws base plate screws ground screw ground screw lock washer spout cap " spout filter screen (DAVR) ¼" spout filter screen (D-AV, D-AV-0ASM) " spout (DAVR) ¼" spout (D-AV, D-AV-0ASM) " spout O-ring (DAVR) ¼" spout O-ring(D-AV, D-AV-0ASM) valve stem guide O-ring " spout adapter (DAVR) ¼" spout adapter (D-AV, D-AV-0ASM) ½" inlet expander (D-AV-0ASM) use kit DAV-SK use kit DAV-SK SPRG-L O-RING-AS-9 DAL- DAL- use kit DAV-SK STEMPACK-L0 SLV- NUTL7- use kit /D-TK DAL-0 PIN-L9-SS DAL-AV AV AV-7 DAL-AV- 00AV- DAL-AV-0 use kit DAL-AV- use kit DAL-AV- use kit DAL-AV- use kit DAL-AV- O-RING-AS0 use kit DAL-AV- use kit DAL-AV- 0 Repair Kits /D-TK DAV-SK DAL-AV- DAL-AV- trigger, bushing, pin and cotter pin main and secondary poppet assemblies, cap O-ring and valve stem stem assembly " spout assembly (DAVR) ¼" spout assembly (D-AV, D-AV-0ASM) Includes Item #s,,,,,, A, A, 7A B, B, 7B Dixon Bayco 00

83 Replacement Parts D (½") and D (¼") Series AN, AN0 (UL Listed) Automatic Shut-off Bulk Delivery Nozzles Bill of Materials Item # Qty body trigger poppet assembly second poppet assembly poppet spring cap O-ring cap cover screw cover washer cover diaphragm assembly diaphragm spring release shaft release balls release spring release guide venturi cone O-ring valve cone cone washer cone inner O-ring adapter O-ring vacuum tube spout cone spring valve stem assembly cotter pin tube nipple nipple clevis pin ear clamp set screws ratchet screws ratchet Repair Kits AN-RK AN-RK AN-RK replacement break away spout kit for AN & AN0 ONLY, spout, spout ring, O-ring and plastic vacuum tube elbow replacement ratchet kit, ratchet and screws replacement trigger kit, trigger, pin and cotter pin Includes Item #s not illustrated,, 9, Note: Only the parts listed in the above repair kits can be replaced while in the fi eld Improper servicing of your automatic nozzle can cause the nozzle to not function properly, which could cause property damage, injury or death. Do not disassemble the nozzle or the warranty will be void. Return nozzles for repair to your Dixon Bayco distributor. Anti-tamper compound has been placed at strategic locations to detect disassembly. Bayco Petroleum Products FloTech Overfill Products Petroleum Replacement Parts Index Dixon Bayco

84 Index Petroleum Replacement Parts FloTech Overfill Products Bayco Petroleum Products Replacement Parts 0-9 Series Gravity Nozzle Repair Kits 0TK trigger, pin 0SK plunger, O-rings, valve seal, valve base, valve plate 900 Series Utility Nozzle Bill of Materials Item # body trigger use kit 0TK trigger pin use kit 0TK valve stem plunger use kit 0SK plunger O-ring 00-7A valve base use kit 0SK 7 valve seal use kit 0SK valve plate use kit 0SK 9 valve spring SPRG-L 0 aluminum cap 0- Buna O-ring cap O-RING# aluminum spout 0- Bill of Materials Item # body plunger trigger valve spring cap O-ring holder valve gasket 7 holder button gasket valve seal 9 cap 0A " spout 0B ¾" spout 0C " bent spout 0D ¾" bent spout not ¾" FNPT inlet reducer illustrated Repair Kits 900TK trigger 900SK plunger assembly, valve assembly, cap O-ring Qty Includes Item #s,,,, 7,, use kit 900SK 900TK SPRG use kit 900SK use kit 900SK use kit 900SK RB Qty Includes Item #,,,, 7,, Dixon Bayco 00

85 Replacement Parts SWMF, SWMF0 and SWMF00 Swivels Bill of Materials SWMF & SWMF0 Item # Qty female body male body screw lock washer thrust bearing thrust washer O-ring holder retaining ring front bearing rear bearing O-ring O-ring felt ring support washer support ring use kit SWMF-RK use kit SWMF-RK use kit SWMF-RK use kit SWMF-RK use kit SWMF-RK or SWMF-RK use kit SWMF-RK use kit SWMF-RK or SWMF-RK use kit SWMF-RK or SWMF-RK use kit SWMF-RK or SWMF-RK use kit SWMF-RK or SWMF-RK use kit SWMF-RK or SWMF-RK use kit SWMF-RK use kit SWMF-RK Bill of Materials SWMF00 Item # Qty Repair Kits Includes Item #'s SWMF-RK SWMF-RK SWMF-RK swivel grease nipple kit swivel seal and wear kit complete swivel rebuild kit SWMF-RK SWMF-RK swivel seal and wear kit complete rebuild kit 7, 9, 0,,,,,,, 7,, 9, 0,,,,,,, 0,,,,,,, 7,, 9, 0,,,,, Hose Shank and Check Valve Swivels Check Valve NPT Swivel 0 ¼" MNPT x ¼" FNPT 0U - ½" MNPT x ½" FNPT 0R - ¼" MNPT x ½" FNPT Hose x MNPT Swivel ¼" MNPT x ¼" hose shank U - ½" MNPT x ½" hose shank 70 - ½" MNPT x ⅜" hose shank Repair Kits 00SK 00SK 70RK female body male body front bearing O-ring holder retaining ring support washer support ring thrust washer thrust bearing O-ring large O-ring rear bearing felt ring lock washer screw use kit SWMF-RK or SWMFRK use kit SWMF-RK or SWMFRK use kit SWMF-RK use kit SWMF-RK use kit SWMF-RK use kit SWMF-RK use kit SWMF-RK use kit SWMF-RK or SWMFRK use kit SWMF-RK or SWMFRK use kit SWMF-RK or SWMFRK use kit SWMF-RK or SWMFRK use kit SWMF-RK use kit SWMF-RK replacement seal kit & retaining ring for 0, and 0R replacement seal kit & retaining ring for U, 0U replacement seal kit and retaining ring for 70 " NPT MALE THREAD SWMF0 SWMF 00AV and AV Angle Valves Repair Kit 00K 0 9 SWMF00 replacement stem guide assembly, plunger assembly, O-ring and cotter pin 7 " NPT FEMALE THREAD Bayco Petroleum Products FloTech Overfill Products Petroleum Replacement Parts Index Dixon Bayco

O-Ring Swivel Joints

O-Ring Swivel Joints O-Ring Swivel Joints O-Ring Parts Identification List 1. O-ring (dust) seal 2. ball retainer screw 3. O-ring (pressure) seal 4. grease fitting 5. ball bearings O-Ring he O-ring pressure seal ensures a

More information

TRANSPORT YOU CAN TRU S T PRODUCT CATALOG

TRANSPORT YOU CAN TRU S T PRODUCT CATALOG TRANSPORT SOLUTIONS YOU CAN TRU S T PRODUCT CATALOG Table of Contents Tank Franklin Fueling Systems Tank product line is comprised of an extensive line of products for both loading and off loading applications.

More information

Electronic Overfill Systems

Electronic Overfill Systems Civacon 5-Wire Replacement Overfill Monitor GEI : 3100-3100 GEI : 3150-3150 - without housing Civacon Electronic Overfill Protection ROM II Monitor GEI : 3202R-3202 GEI : 3252-3252 - without housing Quick

More information

ColVic Tanker Fittings

ColVic Tanker Fittings Tanker Fittings tanker fittings for fuel tankers are designed and manufactured by to accepted industry standards. All the fittings have full product and installation support and are available at short

More information

TANK TRUCK COMPONENTS CATALOGUE

TANK TRUCK COMPONENTS CATALOGUE TANK TRUCK COMPONENTS CATALOGUE Our unrivalled catalogue of components includes a range of manhole covers and accessories, emergency valves and vapour transfer & recovery equipment all tailored to fit

More information

Dixon Bayco. Dry Bulk dixonbayco.com Customer Service:

Dixon Bayco. Dry Bulk dixonbayco.com Customer Service: UFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTUR Dixon Bayco 2013 dixonbayco.com Customer Service: 877.963.4966 Table of Contents...2-25 Air Relief Valve

More information

********************************* Action Not Allowed

********************************* Action Not Allowed Page 232 To Order Call: 1.877.DBL.TANK Valves Betts Hydrolet Valves... 233 Betts Emergency Unloading Fixture... 234 Betts Flush Valve... 234 Betts Rear Head Valve... 234 Betts 3, 4, & 6 Sliding Valve...

More information

Specification Sheet Form Rev

Specification Sheet Form Rev Sales Administration Use Only Quote Name Quote Revision Shop Order Number Serial Number(s) Date Customer : Customer Name Salesperson Model : Salesperson Name Part / Drawing Number : 725-1021 : ST 9300

More information

Dry Bulk Handling Equipment

Dry Bulk Handling Equipment Page 36 To Order Call: 1.877.DBL.TANK 1.877.325.8265 Dry Bulk Handling Equipment Dry Bulk Tee... Aerators... Solimar Fluidizer Plates... Drum 450 Series Blower... Drum 807 and 907 Blowers... Morris Dry

More information

Sanitary Solutions Valves/Product Recovery System Catalog Distributed By:

Sanitary Solutions Valves/Product Recovery System Catalog Distributed By: Sanitary Solutions Valves/Product Recovery System Catalog Distributed By: Air Blow Check Valves SSABCV-Size-Alloy SSABCV-FNPT-Size-Alloy SSABCV-RHB-Size-Alloy Air Blow, Y-Ball, Check Valve Sanitary Solutions

More information

1004D2/1005E API Bottom Loading Coupler. 1005E Small handles used throughout Europe 1004D

1004D2/1005E API Bottom Loading Coupler. 1005E Small handles used throughout Europe 1004D PART #H32183PA February 2009 1004D2/1005E API Bottom Loading Coupler The 1004D2 is the standard in drip-less bottom loading couplers and a proven performer at major oil terminals worldwide. The 1004D2

More information

SERIES. The Ultraflo Transport Line Resilient Seated Butterfly Valves: Specifically Designed for use in the Bulk Trailer Industry.

SERIES. The Ultraflo Transport Line Resilient Seated Butterfly Valves: Specifically Designed for use in the Bulk Trailer Industry. The Ultraflo Transport Line Resilient Seated Butterfly Valves: 2-12 Specifically Designed for use in the Bulk Trailer Industry 390 SERIES 400 SuperioR Performance STRONGER Construction Ultraflo proudly

More information

LUBRICATION & FLUID HANDLING ACCESSORIES. Heavy duty knurled steel barrel with large threads for easy loading.

LUBRICATION & FLUID HANDLING ACCESSORIES. Heavy duty knurled steel barrel with large threads for easy loading. hand grease guns Lever type The tough high pressure cast iron head makes Pro-Master Grease Guns unique in comparison to common pot metal or other die cast heads with a head burst pressure of 17,000 PSI

More information

Leak Testing and Filling Connectors

Leak Testing and Filling Connectors QUICK SEAL Leak Testing and Filling Connectors Catalog QS-1207 APPLICATIONS: PUMPS VALVES CASTINGS AIR CONDITIONING REFRIGERATION EQUIPMENT BEVERAGE DISPENSERS ICE MACHINES DRINKING FOUNTAINS WATER HEATERS

More information

Plumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs

Plumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs Plumbing Hale offers a wide variety of plumbing components to make the pump installation and operation easier for the OEM and End User. Hale controls allow for a clean and compact pump panel. Controls

More information

Petrochemical Life Cycle: Refining

Petrochemical Life Cycle: Refining NUFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACT Petrochemical Life Cycle: Refining 1 2 3 Exploration and Production Refining Terminal to Retail Customer

More information

Emergency Shear Valves

Emergency Shear Valves Emergency Shear Valves 0060 Underpump Emergency Valve The Emco Wheaton 0060 Emergency Shear Valve incorporates a replaceable shear section and a heat sensitive fusible link assembly. The valve can be manually

More information

FUEL DISPENSING SYSTEMS SE-47. Component Details. 120V AC - 18 GPM Metered Tank-top Pump, Remote Dispensing System

FUEL DISPENSING SYSTEMS SE-47. Component Details. 120V AC - 18 GPM Metered Tank-top Pump, Remote Dispensing System FUEL DISPENSING SYSTEMS Component Details SE-47 120V AC - 18 GPM Metered Tank-top Pump, Remote Dispensing System 120V AC Electric Pump - 1-1/4" Inlet - 1" Outlet 3-Wheel Mechanical Meter in Cabinet 1 Automatic

More information

16 INSPECTION MANHOLE

16 INSPECTION MANHOLE 16 INSPECTION MANHOLE Clamp Ring Style EASILY INSTALLED LOW MAINTENANCE ECONOMICAL Tiona Inspection Manholes provide quick, safe entrance and exit from your tanks. Heavy gauge metal and welded construction

More information

Specification Sheet Form Rev

Specification Sheet Form Rev Quote Name: 8500 EDC S1 Shop Order Number: Sales Administration Use Only Number-001 Serial Number(s): Number Date: 99/99/9999 CUSTOMER : Customer Name SALESPERSON : Salesperson Name MODEL : 8500 EDC S1,

More information

General information about underground storage tank (UST) fueling systems in every day language.

General information about underground storage tank (UST) fueling systems in every day language. What this document contains: General information about underground storage tank (UST) fueling systems in every day language. What you need to know about Texas Commission on Environmental Quality (TCEQ)

More information

FUEL DISPENSING SYSTEMS SE-67. Component Details. 240V AC - 35 GPM Metered Tank-top Pump, Remote Dispensing System

FUEL DISPENSING SYSTEMS SE-67. Component Details. 240V AC - 35 GPM Metered Tank-top Pump, Remote Dispensing System FUEL DISPENSING SYSTEMS Component Details SE-67 240V AC - 35 GPM Metered Tank-top Pump, Remote Dispensing System 12V DC Electric Pump - 1 Inlet - 3/4 Outlet 3-Wheel Mechanical Meter 1 Automatic Nozzle,

More information

BAYCO DRY BULK D B D DIXONVALVE.COM. Dry Bulk Products. pages Dry Bulk Replacement Parts. pages Dixon Bayco. Index.

BAYCO DRY BULK D B D DIXONVALVE.COM. Dry Bulk Products. pages Dry Bulk Replacement Parts. pages Dixon Bayco. Index. United States pages 2-25 Replacement Parts pages 26-36 International Albany, NY ph 518.725.0998 178A Corporate Drive Gloversville, NY 12078 fx 518.725.8542 Houston, TX ph 713.678.4291 6525 Homestead Road

More information

FUEL DISPENSING SYSTEMS SE-37. Component Details. 120V AC - 20 GPM Metered Tank-top Dispensing System

FUEL DISPENSING SYSTEMS SE-37. Component Details. 120V AC - 20 GPM Metered Tank-top Dispensing System FUEL DISPENSING SYSTEMS Component Details SE-37 120V AC - 20 GPM Metered Tank-top Dispensing System 120V AC Electric Pump - 1-1/4" Inlet - 1" Outlet 3-Wheel Mechanical Meter 1" Automatic Nozzle, Swivel

More information

Overfill Prevention Valve

Overfill Prevention Valve Overfill Prevention Valve The Guardian A1100 Materials Description Body: Aluminum Floats: HDPE Seals: Viton Specifications Weight: 4.3 lbs. Diameter: 3.76 Length: 18.0 Approvals CARB ULC City of New York

More information

Petroleum Manhole Identification

Petroleum Manhole Identification Petroleum Manhole Identification 10 Fill Cover Assy. PAF 406-98 shown FVA8110BAM PAF1000 10 FILL COVER ALUM COLLAR FVA8110SSM PAF1000 10 FILL COVER STEEL COLLAR PPVL710BAB PAF406-98 10 FILL COVER ALUM

More information

LINED EQUIPMENT // Fort Vale Engineering Ltd CATALOGUE REVISION_

LINED EQUIPMENT // Fort Vale Engineering Ltd CATALOGUE REVISION_ LINED EQUIPMENT // 3 45 Footvalve 4 to 3 Hydraulic Footvalve 25mm Ball Valve 50mm Ball Valve 80mm Ball Valve 3" Butterfly Valve MK3 65mm Flanged Relief Valve 80mm Flanged Vacuum Vent Valve Fort Vale Engineering

More information

Introduction. Installation. Maintenance. Bill of Materials

Introduction. Installation. Maintenance. Bill of Materials Table of Contents Introduction Specitications... 3 Operation... 4 Installation New Installations... 6 Retrofit Installations... 6 Flow Control Switch... 7 Dimensions... 8 E-7 Valve... 28 E-7 Valve with

More information

Chemical Hydraulic Valve Designed for hauling a variety of products U.S. Pat. No. 3,065,949 Patented 1962

Chemical Hydraulic Valve Designed for hauling a variety of products U.S. Pat. No. 3,065,949 Patented 1962 Chemical Hydraulic Valve Designed for hauling a variety of products U.S. Pat. No. 3,065,949 Patented 962 Schematic Tel. (84) 723-250 Fax (84) 723-7030 E-Mail: betts@bettsind.com Web Site: www.bettsind.com

More information

Transportation Valves

Transportation Valves Transportation Valves A Name You ve Trusted for Years... 780 Series Butterfly Valves Features: Available in sizes 3 thru 6 One handle fits sizes 3 thru 6 Integrated 180º notch plate eliminates mounting

More information

RELIANCE G6200 MECHANICAL FLEET DISPENSER

RELIANCE G6200 MECHANICAL FLEET DISPENSER RELIANCE G6200 MECHANICAL FLEET DISPENSER Wayne Reliance G6200 Series Mechanical Fleet Dispensers Fueling capabilities you can depend on down the road Keeping your fleet on the move depends on reliable,

More information

KAMLOK AUTOLOK QUicK coupler SySTeMS

KAMLOK AUTOLOK QUicK coupler SySTeMS KAMLOK AUTOLOK Quick Coupler Systems KAMLOK Twin-Kam Quick couplings OPW Kamlok quick-disconnect couplings are the industry standard in cam and groove couplers for safety and ease of use. All OPW Kamlok

More information

Page ATALOGUE. Web: Tel: Fax:

Page ATALOGUE. Web:    Tel: Fax: Page ACUUM PARE ANKER ARTS ATALOGUE Page 2 CONTENTS PAGE GAUGES 3 SAUNDERS M TYPE VALVES 4 LEVER BALL VALVES 5 GATE VALVES 6 AIR ACTUATED VALVES 7 KNIFE GATE VALVES 8 ACRYLIC SIGHT TUBE 9 RUBBER SUCTION

More information

HK Series - 2 Way 1HK to 8 HK 1 8" to 1" Body

HK Series - 2 Way 1HK to 8 HK 1 8 to 1 Body HK Series - 2 Way 1HK to 8 HK 1 8" to 1" Body Series HK Couplings are designed for general purpose hydraulic service. Some are suitable for use with various liquids, chemicals, steam, gases, and vacuum.

More information

TUF-SKIN VALVES. Universal sales 1~1~2O15. Catalog ~ Price List. UNIVERSAL SALES Booth Street Junction City, OR

TUF-SKIN VALVES. Universal sales 1~1~2O15. Catalog ~ Price List. UNIVERSAL SALES Booth Street Junction City, OR Universal sales TUF-SKIN VALVES Catalog ~ Price List 1~1~2O15 MEMBER MANA Manufacturers Agents National Association UNIVERSAL SALES 92311 Booth Street Junction City, OR 97448 www.universalsales.biz Ph:

More information

Hoffman Specialty Service Parts Catalog PARTS LIST HS-800C

Hoffman Specialty Service Parts Catalog PARTS LIST HS-800C Hoffman Specialty Service Parts Catalog PARTS LIST HS-800C Hoffman Specialty Table of Contents STEAM TRAPS FLOAT AND THERMOSTATIC SERIES PAGE INVERTED BUCKET SERIES PAGE C 6 B0 H B I B X 6 B 6 8 B 6 0

More information

Titan Check Valves. Call. Fax. . Visit. Titan Flow Control. Your Pipeline to the Future

Titan Check Valves. Call. Fax.  . Visit. Titan Flow Control. Your Pipeline to the Future Your Pipeline to the Future TITAN 290 Corporate Drive Lumberton, NC 28358 Titan Check Valves, Inc. is a high quality manufacturer of check valves. With a dedication to great customer service, cutting edge

More information

1-20 (25mm-500mm) SERIES 20/21 Wafer/Lug SANITARY AND CHEMICAL / RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company

1-20 (25mm-500mm) SERIES 20/21 Wafer/Lug SANITARY AND CHEMICAL / RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company BUTTERFLY VALVES SANITARY AND CHEMICAL / RESILIENT SEATED SERIES 20/21 Wafer/Lug 1-20 (25mm-500mm) The High Performance Company SERIES 20 1-20 (25mm-500mm) Bray Controls is proud to offer a high quality

More information

Dry Bulk 2009 catalog

Dry Bulk 2009 catalog Dry Bulk Products pages - 9 Albany, NY Chicago, IL Los Angeles, CA 8-7-0998 78A Corporate Drive Gloversville, NY 078 Fax: 8-7-8 800-33-0 0 Chestnut Avenue Westmont, IL 09 Fax: 30-33-0 Atlanta, GA Cleveland,

More information

Manual Valves. Indianapolis Chicago San Juan

Manual Valves. Indianapolis Chicago San Juan Manual Valves Indianapolis Chicago San Juan www.hollandapt.com 800-800-8464 Check Valves 45 Spring Check Valves Waukesha Cherry-Burrell W45 Check Valves are wafer-style, where product flow pushes the valve

More information

KUNKLE SAFETY AND RELIEF VALVE PRODUCTS OVERVIEW

KUNKLE SAFETY AND RELIEF VALVE PRODUCTS OVERVIEW KUNKLE SAFETY AND RELIEF VALVE PRODUCTS OVERVIEW ISSUED SEPTEMBER 2014 KUNKLE SAFETY AND RELIEF VALVE PRODUCTS OVERVIEW Contents Models 1 and 2 Brass Safety Valves... 4 Models 19, 19M, 20, 20M, 20P, 20MP,

More information

Delivering Peak Performance. High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments

Delivering Peak Performance. High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments Delivering Peak Performance High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments A leading brand of high pressure valves, tubing, fittings and accessories,

More information

Evans SN Series. Evans. Sanitary & Vacuum Ball Valves

Evans SN Series. Evans. Sanitary & Vacuum Ball Valves SN Series Sanitary & Vacuum Ball Valves SN Series 1/2-4, DN/ISO 8 thru ISO 100 Sizes True Bore Design Cavity Free PTFE Seats Live Loaded Stem Seal ASME/BPE Compliant SF1 Standard Surface Finish The SN

More information

Baumann Series Flexsleev Control Valve Instructions

Baumann Series Flexsleev Control Valve Instructions Instruction Baumann 86000 Series Instructions Baumann 86000 Series Flexsleev Control Valve Instructions Contents Introduction...1 Scope...1 Safety Precautions...1 Maintenance...2 Installation...3 Air Piping...3

More information

2-20 (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company

2-20 (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company BUTTERFLY VALVES RESILIENT SEATED SERIES 30/31 Wafer/Lug 2-20 (50mm-500mm) The High Performance Company SERIES 30/31 2-20 (50mm-500mm) Bray Controls is proud to offer a high quality line of butterfly valves

More information

Founded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry.

Founded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry. Founded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry. COUPLING PRODUCTS Compression Couplings Side-Band Couplings Quickon II Couplers

More information

We also have literature pieces available in Spanish. These items can be downloaded from our Spanish Website at

We also have literature pieces available in Spanish. These items can be downloaded from our Spanish Website at Established in 1855, Morrison Bros. Co. is among the oldest private manufacturing firms in the Midwestern United States. Throughout the last century, the Morrison tradition grew and today the company is

More information

DIRECT REPLACEMENTS. phdinc.com (800) INCREASE PRODUCTION REDUCE MAINTENANCE REDUCE DOWNTIME REDUCE SCRAP STRETCHING CYLINDERS

DIRECT REPLACEMENTS. phdinc.com (800) INCREASE PRODUCTION REDUCE MAINTENANCE REDUCE DOWNTIME REDUCE SCRAP STRETCHING CYLINDERS SOLUTIONS A BLOW division MOLDING SOLUTIONS of PHD P Quality SIDEL Support Delivery PLASTIC PACKAGING COMPONENTS P ASTIC PACKAGING COMPONENTS GRO DIRECT REPLACEMENTS phdinc.com (800) 624-8511 INCREASE

More information

M503, M504. M503, M504 Pneumatic Control Box * * Product Data Sheet. Features & Benefits

M503, M504. M503, M504 Pneumatic Control Box * * Product Data Sheet. Features & Benefits Product Data Sheet M503, M504 Pneumatic Control Box Rear view showing bulkhead pif s M504-6/CAB 6 compartment control box Features & Benefits Lock and key detail Compact design for flexibility of fitting

More information

Bulk Chemical Pumps. Model 1100 Series Pumps. TOTE PUMP & GO KIT The Most Versatile, Dependable Liquid Transfer Pump You Will Ever Own PUMPS

Bulk Chemical Pumps. Model 1100 Series Pumps. TOTE PUMP & GO KIT The Most Versatile, Dependable Liquid Transfer Pump You Will Ever Own PUMPS BULK CHEMICAL 0 Bulk Chemical Pumps Model 00 Series Pumps New from SHURflo, the rugged 00 Series General Utility Transfer Pump is a highly-efficient, VDC, Positive-displacement pump. This Self-Priming,

More information

ISO Certificate 9001:2008

ISO Certificate 9001:2008 ISO Certificate 9001:2008 CONTENTS * Overfill prevention equipments 5 * Optic sensors 5 * Cable 11 * Sockets 12 * Dummy 14 * Ground Bolt 15 * Manhole covers 16 * 20 Manhole Covers 16 * 16 Manhole Covers

More information

KunKle SAFETY AND RELIEF VALVE PRODUCTS OVERVIEW

KunKle SAFETY AND RELIEF VALVE PRODUCTS OVERVIEW KunKle SAFETY AND RELIEF VALVE PRODUCTS OVERVIEW ISSUED NOVEMBER 2012 KunKle SAFETY AND RELIEF VALVE PRODUCTS OVERVIEW Contents Models 1 and 2 Brass Safety Valves... 4 Models 19, 19M, 20, 20M, 20P, 20MP,

More information

Plastics & Packaging ONE STOP SHOPPING. Canada USA

Plastics & Packaging ONE STOP SHOPPING. Canada USA T H E C O N V E Y I N G P R O D U C T S P E O P L E Plastics & Packaging C O N V E Y I N G P R O D U C T S G U I D E Canada 1-800-263-1942 USA 1-800-263-7782 sales@lorenz.ca www.lorenzproducts.com ISO

More information

GRACO KING 56:1 AIRLESS SPRAY PUMP

GRACO KING 56:1 AIRLESS SPRAY PUMP GRACO KING 56:1 AIRLESS SPRAY PUMP PART NUMBERS AND SCHEMATICS GUIDE Company Profile Since 1944, Marco has developed a strong tradition of providing innovative and reliable products and services to the

More information

BASCO PIPELINE AFTERCOOLERS. ...world leaders in heat transfer technology

BASCO PIPELINE AFTERCOOLERS. ...world leaders in heat transfer technology BASCO PIPELINE AFTERCOOLERS...world leaders in heat transfer technology Basco Pipeline Aftercoolers (PLAC) The Basco PLAC and PLAC II aftercooler and companion separator provide an ideal combination to

More information

Product Information Product Information

Product Information Product Information SBCouplings Product Information Product Information Art. No: PR-010301-0112 Version:110330 Art.No XB06 Version 140630 Introduction About Mann Tek Mann Teknik AB is a Swedish company located in Mariestad,.

More information

We Are the Worldwide Provider for All Your Valve and Fitting Needs

We Are the Worldwide Provider for All Your Valve and Fitting Needs Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C Industries strives to earn your business by offering an extensive line of high quality products with a proven track

More information

KJ Motor/Pump Assembly. Jetter. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.

KJ Motor/Pump Assembly. Jetter. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A. KJ-000 Motor/Pump Assembly NOTE: Order parts by Number Only. 0 0 0 Gasoline Engine, Hp Manual Start 0 Gasoline Engine, Hp Electric Start Decal, Warning 0 Decal, Fuel Warning Decal, Model. KJ-000 Key, /

More information

2"- 20" (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES CELEBRATING. The High Performance Company

2- 20 (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES CELEBRATING. The High Performance Company BUTTERFLY VALVES RESILIENT SEATED SERIES 30/31 Wafer/Lug 2"- 20" (50mm-500mm) CELEBRATING Y E A R S The High Performance Company SERIES 30 2" 20" (50mm 500mm) Bray Controls is proud to offer a high quality

More information

Electric Fuel Pump FPM

Electric Fuel Pump FPM INSTRUCTION MANUAL Electric Fuel Pump FPM S1590, Rev B LISTED MOTOR FPM-12, FPM-24, FPM-115, FPM-220 Congratulations on purchase of this World Class Electric Fuel Pump! Elbow This is an Electric Fuel Pump.

More information

BR 10a Control and Shut-off Butterfly valve

BR 10a Control and Shut-off Butterfly valve M-PTFE lined double-eccentric BR 10a Control and Shut-off Butterfly valve Application: Tight-closing, double-eccentric butterfl y control valve with M-PTFE lining for process engineering and plants with

More information

P-250 Rev. G P.D. Oscillating Piston Flowmeters: 2" Type 4-MT and MTSC Petroleum 2" Type 4D-MT LP Gas. Parts List for Petroleum and LPG Truck Meters

P-250 Rev. G P.D. Oscillating Piston Flowmeters: 2 Type 4-MT and MTSC Petroleum 2 Type 4D-MT LP Gas. Parts List for Petroleum and LPG Truck Meters P-250 Rev. G P.D. Oscillating Piston Flowmeters: 2" Type 4-MT and MTSC Petroleum 2" Type 4D-MT LP Gas Parts List for Petroleum and LPG Truck Meters Type 4-MT Air Release 1 15 8 7 9 14 11 16 13 6 17 2 3

More information

Stainless Products, Inc.

Stainless Products, Inc. Stainless Products, Inc. CAT. 2012-00 www.stainless-products.com Sanitary Air s & Butterfly s Stainless Products, Inc. 1649 72nd Avenue Somers, WI 53171 Ph: 800-558-9446 262-859-2826 Fax: 262-859-2871

More information

HEAVY-DUTY VALVES. *Limited to Manufacture Defects. Operating Pressure (psi) " Stainless Steel " Polymer

HEAVY-DUTY VALVES. *Limited to Manufacture Defects. Operating Pressure (psi)  Stainless Steel  Polymer AKRON BRASS COMPANY PH. 800.228.1161 (330.264.5678) akronbrass.com Heavy Duty Brass Swing-Out Valves Akron Brass offers a wide variety of apparatus valves to meet the demands of today s fire service. All

More information

Mechanical Petroleum Tank-Truck Parts/Products Catalog

Mechanical Petroleum Tank-Truck Parts/Products Catalog Mechanical Petroleum Tank-Truck s/products Catalog Expert solutions for the safe handling, transfer, monitoring, measuring and protection of hazardous bulk products worldwide. Quality Guaranteed Throughout

More information

COUPLINGS. Series Page. Couplings HOSE

COUPLINGS. Series Page. Couplings HOSE COUPLINGS Series Page DRAGON BREATH Steam Female Wing Nut...7610...186 DRAGON BREATH Steam Female Grip Nut...7613...186 DRAGON BREATH Steam Adapters & O-Ring Viton...761...187 Universal Type...7611...188

More information

MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE

MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE ISO 9001 CERTIFIED MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve,

More information

SERIES BCS STRETCH ROD CYLINDERS

SERIES BCS STRETCH ROD CYLINDERS BCS y Q ua lit Support SOLUTIONS for the Plastic Bottle Blowing Industry DIRECT REPLACEMENT FOR SIDEL SERIES AND SERIES MACHINES P U O C PACK TI A S y er iv el D ENTS GR N O G COM P IN G SERIES BCS STRETCH

More information

We Are the Worldwide Provider for All Your Valve and Fitting Needs

We Are the Worldwide Provider for All Your Valve and Fitting Needs Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C strives to earn your business by offering an extensive line of high quality products with a proven track record for

More information

COMPACT RACK TYPE DISHWASHER

COMPACT RACK TYPE DISHWASHER SPARE PARTS CATALOG ELECTROLUX PROFESSIONAL COMPACT RACK TYPE DISHWASHER 44 66 Models Affected: Electrolux Part Number Description 534034 ECRT66R208 534035 ECRT66L208 534036 ECRT66R240 534037 ECRT66L240

More information

SB Series Wafer/Lug Butterfly Valves

SB Series Wafer/Lug Butterfly Valves SB Series Wafer/Lug Butterfly Valves Engineering Creative Solutions for Fluid Systems Since 1901 ABOUT PRATT INDUSTRIAL Pratt Industrial specializes in the design, engineering, and worldwide distribution

More information

KUNKLE Safety and Relief ValVe PRoductS overview

KUNKLE Safety and Relief ValVe PRoductS overview KUNKLE Safety and Relief ValVe PRoductS overview april 2015 KUNKLE Safety and Relief ValVe PRoductS overview Contents Models 1 and 2 Brass Safety Valves... 4 Models 19, 19M, 20, 20M, 20P, 20MP, 200A and

More information

2"- 20" (50mm-500mm) series 30/31 Wafer/Lug. butterfly valves. resilient seated. The High Performance Company

2- 20 (50mm-500mm) series 30/31 Wafer/Lug. butterfly valves. resilient seated. The High Performance Company butterfly valves resilient seated series 30/31 Wafer/Lug 2"- 20" (50mm-500mm) The High Performance Company SERIES 30 2" 20" (50mm 500mm) Bray Controls is proud to offer a high quality line of butterfly

More information

2"- 20" (50mm-500mm) series 30/31 Wafer/Lug. butterfly valves. resilient seated. The High Performance Company

2- 20 (50mm-500mm) series 30/31 Wafer/Lug. butterfly valves. resilient seated. The High Performance Company butterfly valves resilient seated series 30/31 Wafer/Lug 2"- 20" (50mm-500mm) The High Performance Company SERIES 30 2" 20" (50mm 500mm) Bray Controls is proud to offer a high quality line of butterfly

More information

Section H Spray Guns. Table of Contents

Section H Spray Guns. Table of Contents Section H Overview You re sure to find a solution for your cleaning and rinsing needs in our comprehensive line of hand-held spray guns. Options range from a gentle spray to a high-impact solid stream.

More information

OPW Emergency Safety Disconnector. Safety Breakaway Coupling Type NTS-PU Series (Pull-Away) Sizes 1-4 (DN25 DN100) Page 1

OPW Emergency Safety Disconnector. Safety Breakaway Coupling Type NTS-PU Series (Pull-Away) Sizes 1-4 (DN25 DN100) Page 1 OPW Emergency Safety Disconnector Safety Breakaway Coupling Type NTS-PU Series (Pull-Away) Sizes 1-4 (DN25 DN100) Page 1 Content Please read carefully the following OPW user manual to avoid incidents and

More information

High Pressure Valves, Fittings and Tubing Pressures to 65,000 psi

High Pressure Valves, Fittings and Tubing Pressures to 65,000 psi igh Pressure Valves, ittings and Tubing MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed

More information

Medium Pressure Valves, Fittings and Tubing Pressures to 21,000 psi

Medium Pressure Valves, Fittings and Tubing Pressures to 21,000 psi Medium Pressure Valves, ittings and Tubing MXIMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed

More information

DANKO STOCK B DANKO XL SKID UNIT 250 Gallon UPF Defender Poly Tank

DANKO STOCK B DANKO XL SKID UNIT 250 Gallon UPF Defender Poly Tank DANKO XL SKID UNIT 250 Gallon UPF Defender Poly Tank FIRE PUMP A Waterous 2515-LE pump shall be provided and bolted directly to the specified engine and capable of the following performance: Max Pressure

More information

Safety Break-away Couplings - Breaking Bolt Series

Safety Break-away Couplings - Breaking Bolt Series Fittings Safety reak-away Couplings - reaking olt Series Industrial Version The breaking bolt industrial breakaway coupling is designed to minimize spillage and damage associated with drive away and pull

More information

MADE IN THE USA BACKFLOW PREVENTERS

MADE IN THE USA BACKFLOW PREVENTERS MADE IN THE USA BACKFLOW PREVENTERS TABLE OF CONTENTS Selection Guide........................................................................3 Double Check Valve (Series 40-100)......................................................4,5

More information

CenterFlo Pumps. Air Operated Double Diaphragm (AODD) Pumps. Automotive Commercial Industrial

CenterFlo Pumps. Air Operated Double Diaphragm (AODD) Pumps. Automotive Commercial Industrial CenterFlo Pumps Air Operated Double Diaphragm (AODD) Pumps Automotive Commercial Industrial CenterFlo NEW CenterFlo Technology Diaphragm Pumps Advanced Technology, Superior Performance, Low Maintenance.

More information

APS SERIES. Air Pump Shut Off Valves INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS

APS SERIES. Air Pump Shut Off Valves INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS APS SERIES APS-DBV-4FP 334 Friendship Drive, Magnolia, TX 77355 Tel.: 8-59-7768 Fax: 8-59-749 www.hyvair.com A0SR Standard Features Indicator A position indicator

More information

I & M Mark 708ME. Ideal Installation. Start-Up Procedure. Installation & Maintenance Instructions for Mark 708 & Motor Actuator

I & M Mark 708ME. Ideal Installation. Start-Up Procedure. Installation & Maintenance Instructions for Mark 708 & Motor Actuator I & M Mark 708ME 3170 Wasson Road Cincinnati, OH 45209 USA Phone 513-533-5600 Fax 513-871-0105 info@richardsind.com www.lowfl owvalve.com Installation & Maintenance Instructions for Mark 708 & Motor Actuator

More information

BRASS & BRONZE VALVES

BRASS & BRONZE VALVES BRASS & BRONZE VALVES V200 series Cast Brass are economical general service valves. Ball valves feature chrome plated balls with teflon seats, adjustable packing glands and blowout-proof stems. V205 gate

More information

RAZOR. RAZOR HVLP Spray Guns

RAZOR. RAZOR HVLP Spray Guns RAZOR RAZOR HVLP Spray Guns Provides generous material flow that helps you get the job done quickly Offers exceptional atomization rate Promotes a superior finish Proven effective for clear coat, base

More information

Electric Fuel Pump FPM

Electric Fuel Pump FPM INSTRUCTION MANUAL Electric Fuel Pump FPM S1590, Rev B LISTED MOTOR FPM-12, FPM-12/HF, FPM-24, FPM-115, FPM-220 Congratulations on purchase of this World Class Electric Fuel Pump! Pump Outlet Elbow Nozzle

More information

LPM LP-Gas Flowmeter Product Bulletin L LISTED. Primary Features. Specifications 91U3

LPM LP-Gas Flowmeter Product Bulletin L LISTED. Primary Features. Specifications 91U3 LP-Gas Flowmeter Product Bulletin U L LISTED 9U Designed for bobtail tank trucks and bulk plants, the LPM-00 offers the widest flow range, (0-00 gpm) available in a meter of this type. The LPM-00 utilizes

More information

Strahman. Since Strahman full line catalogue Hoses Nozzles Hot Water Makers Mixing Units & Accessories Accessories

Strahman. Since Strahman full line catalogue Hoses Nozzles Hot Water Makers Mixing Units & Accessories Accessories Strahman Strahman full line catalogue Hoses Nozzles Hot Water Makers Mixing Units & Accessories Accessories Since 1964 675 The Parkway Peterborough, ON K9J 7K2 1-800-361-5361 705-743-5361 Catalogue Strahman

More information

Dixon Sanitary General Products. dixonvalve.com Customer Service:

Dixon Sanitary General Products. dixonvalve.com Customer Service: UFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTU General Products dixonvalve.com Customer Service: 877.963.4966 : maintaining the standard of quality The

More information

28-1 & 29 Series. Compact, Light Weight Non-Spill Couplings. Compact Couplings for Applications Requiring Minimal Air Inclusion or Spillage

28-1 & 29 Series. Compact, Light Weight Non-Spill Couplings. Compact Couplings for Applications Requiring Minimal Air Inclusion or Spillage 8- & 9 Series Compact, Light Weight Non-Spill Couplings Compact Couplings for Applications Requiring Minimal Air Inclusion or Spillage Both 8- and 9 Series are non-spill, push-to-connect couplings designed

More information

Suggested Specifications

Suggested Specifications ISO 9001 Certified Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve, setting higher standards for dependable performance

More information

Quick & Dry Disconnect Fittings Catalog.

Quick & Dry Disconnect Fittings Catalog. Quick & Dry Disconnect Fittings Catalog TABLE OF CONTENTS OPW Engineered Systems specializes in engineering, designing and manufacturing of systems for the safe and efficient loading and unloading of critical

More information

HOW BENDS ARE MEASURED EXAMPLES BEND INFORMATION. The degree of a bend may be measured with either a protractor or an angle finder.

HOW BENDS ARE MEASURED EXAMPLES BEND INFORMATION. The degree of a bend may be measured with either a protractor or an angle finder. HOW BENDS ARE MEASURED EXAMPLES The degree of a bend may be measured with either a protractor or an angle finder. 90 OBTUSE ANGLE 45 135 DEGREE OF BEND 45 A B 0 BEND INFORMATION 180 The bend radius is

More information

SECTION 15 Breakaway Couplers

SECTION 15 Breakaway Couplers SECTION Breakaway Couplers Make Model Page Intertraco Intertraco Intertraco Intertraco Intertraco Intertraco Series A & B Breakaway Couplers Series J, N & P Breakaway Couplers Series E & S Breakaway Couplers

More information

Globe Control Valve Series 1a

Globe Control Valve Series 1a Maintenance Globe Control Valve Series 1a are subject to alteration without notice. The text and illustrations do not necessarily display the scope of supply or any ordering of spare parts. Drawings and

More information

AIRLINE EQUIPMENT CATALOGUE //

AIRLINE EQUIPMENT CATALOGUE // AIRLINE EQUIPMENT CATALOGUE // 16 15 14 13 12 11 10 9 The Fort Vale Range of Airline Ball & Butterfly Valves 8 Fort Vale Engineering Ltd. 2014 THIS PAGE IS INTENTIONALLY BLANK AIRLINE VALVE CATALOGUE //

More information

Valve Selection. 1. Function and service considerations

Valve Selection. 1. Function and service considerations 1. Function and service considerations Valve Selection Selection Valves serve the purpose of controlling the fluids in building services piping. Valves are produced in a variety of design types and materials.

More information

F low L ine 72/73 Wafer & Lug Style Sizes 2-24

F low L ine 72/73 Wafer & Lug Style Sizes 2-24 F low L ine 72/73 Wafer & Lug Style Sizes 2-24 Cartridge Seated Butterfly Valves KEY FEATURES Body One piece wafer and lugged body for strength and stability in extreme environments Wafer bodies have a

More information

ICE-CONTROL EQUIPMENT For Ground Anti-icing & Deicing Fluid Application

ICE-CONTROL EQUIPMENT For Ground Anti-icing & Deicing Fluid Application ICE-CONTROL EQUIPMENT For Ground Anti-icing & Deicing Fluid Application PRODUCT SPECIFICATIONS April 1, 2016 LIB-201 Rev09 800-348-2686 deicing.tft.com Effective immediately, the following Task Force Tips

More information