Global Leaders in Dynamic Protection for Equipment and People. WalK-on covers. Steelflex p DYNATECT.COM

Transcription

1 Global Leaders in Dynamic Protection for Equipment and People WalK-on covers Steelflex p DYNATECT.COM

2 Steelflex Play it safe and prevent falling... Efficiently implement required workplace health and safety measures using STEELFLEX covers. The flexible covers serve as protective device for: Inspection pits Machine ways Electroplating tanks Silos Meter flumes Baths for paints, degreasing, etc. When closed, STEELFLEX covers create a surface level with the hall floor and are safe to walk on. The covers can also be provided with an automated opening and closing system. The main advantages at a glance: Custom width and length (largest width made to date: 8000 mm) Resistant to hot chips, coolant-tight Non-skid surface Flexible to both sides Damaged segments can be individually replaced Take-up available with or without canister Excellent testimonials Steelflex with non-skid paint on a machine tool Possible drive types: Air motor (with brakes) Electric motor (optional with position sensor) Spring motor Manually Bottom view Application with rollers 2

3 construction The shade consists of aluminum or steel ribs bonded to stainless steel using a special process. The rib profile depends on the width and the cover loading. Total length is made of assembled individual segments Non-skid coating (Tape or paint) Options: Nylon riders, rollers Sponge seals Filter /lubricator/regulator Air motor drive (Example) Profile dimensions depending on width and load B B A A A = 6,3 mm / 12,7 mm B = Support spacing (depending on project) A = 19 mm/ 25,4 mm/ 38 mm / 50,8 mm B = Support spacing (depending on project) Special designs with custom profiles and materials available on request. design examples With air motor With electric motor 3

4 Steelflex options Scroll-type take-up Canister for take-up Toothed belt drive Gear drive Spring motor Air brake Idler(s) Non-skid tape or paint Nylon riders or rolls Can also be supplied with edge lips to protect the scrolling mechanism from coolant ingress Sponge edge seal to prevent entry of coolant or dirt below the cover Brush wiper to prevent entry of large particles of dirt into take-up Take-up canister (optional) installation variants for air motor: Machine-mounted Floor-mounted, above the way Floor-mounted, below the way Example with electric or spring motor The bi-directional flexibility of STEElFlEx enables versatile problem solutions. Steelflex Idlers Besides walk-on capability, the flexibility to both directions is one of the unique features of this cover. The drawing shows how idlers guide a STEElFlEx cover through a machine column onto other levels. 4

5 Questionaire STEELFLEX Begehbare Abdeckungen/Walk-on Pit Covers Anfrageformular/Questionaire Stückzahl/ Quantity Einzelabdeckung/ Single cover Satz/ Set (1x links/ left, 1x rechts/right) 1. Anwendung/Application Maschinenabdeckung/ Machine Cover Grubenabdeckung/ Pit Cover Flüssigkeitsbehälter für/ Tank for... Begehbar/ walk-on Ersatz f. bestehende Abdeckung/ Replacement existing cover Innenbereich/ Indoor Außenbereich/ Outdoor 4. Abmessungen/Dimensions A Steelflex-Breite/ Steelflex Width... B Grubenbreite/ Pit Width... C Grubenlänge/ Pit Length... D Schienenlänge/ Rail Length... Grubentiefe/ Pit Depth... Montage/Drive Side Location: einseitig/ one side beidseitig/ both sides Montagebereich Aufwickelsystem/ Hardware Mounting Area E... F... G... F Andere Anwendung/ Other application: E G 180 mm min. 2. Arbeitsbedingungen/Operating conditions Trocken/ Dry Schleifstaub/ Grinding Heiße Späne/ Hot Chips Kühlmittel/ Coolant C Temperaturbereich/ Temperature Range: D min.:... C max.:... C Max. Verfahrgeschwindigkeit/ Max. Travel Speed:... A B Beschleunigung/ Acceleration:... Bewegungen/Tag - Movements/day:... ~ 20 mm min. 3. Antrieb/Drive Manuell/ Manual Elektromotor/ Electric Motor Druckluftmotor / Air Motor Take-up Grubenwand Side Of Pit Abdeckung Pit Cover Auflagefläche Supporting Surface Wo/Where In der Grube / Inside Pit (min mm Grubentiefe / Pit Depth ) Oberhalb der Grube/ Outside Pit Außen am Maschinenbett/ Outside at bed way Hinweis: Steelflex Abdeckungen dürfen nur im Stillstand betreten werden! Note: Steelflex covers should only be walked on while stationary 5. Optionen/Options Mit Gehäuse/ with Canister Rutschfeste Streifen/ Non Skid Tape Rutschhemmender Anstrich/ Non Skid Paint Bürstenabstreifer/ Brush Wiper Seitenabdichtung gegen Verschmutzung/ Sponge Edge Seal F LR (Filter, Öler, Reguliereinheit)/ ( Filter, oiler, regulating unit) Firma/Company:... Ansprechpartner/Your name:... Straße/Address:... PLZ/Ort/Postal code/city:... Land/Country... Telefon/Phone:... Fax: www:... Phone: Fax: info@dynatect.de 5

6 Steelflex tank covers Manually operated or motorized Roll-up tank covers are ideal for covering large containers. They can be manually moved or fitted with an electric motor for roll-out and roll-up and they feature stop functions. Can also be supplied with scroll take-up. The tank covers are individually designed and are supplied as a complete system in any width or length. The cover as such usually consists of a stainless steel sheet which is provided with reinforcing ribs on the bottom. If the environmental conditions do not allow the use of stainless steel, a thermoplastic material is available. Ideal tank covers for: Baths for chemicals, degreasing, coating, paints, etc. Containment of hazardous fumes STEELFLEX tank covers prevent the contamination of the tank contents, keep fumes from escaping and protect the operating staff. To design a project, we require the following information: 1) Sketch, drawing or application model with a description, list of details such as type of tank, contents, etc. Please indicate if you require a one-sided or a double-sided cover. 2) Specification of drive system, manual or motorized 3) Internal or external dimension of tank, largest unsupported span and depth of tank Drive Mechanism Tank Length O.D. Tank Lenght I.D. top view Cover Extended Length SS Cover Width Tank Depth Side view Tank Length I.D. Tank Length O.D. front view 6

7 application examples STEElFlEx on a large lathe STEElFlEx on a drilling machine STEElFlEx on a machine for glass fiber processing STEElFlEx on a machine tool STEElFlEx drive below the way 7

8 Steelflex Application examples STEELFLEX Cover Width 5000 mm Length mm 50 x 50 mm aluminum square tubing with stainless steel end caps Tubing is riding on brass railing mounted to sides of pit Air-operated take-up with brake mechanism ensuring saftey when air is turned off With non-skid paint applied to top of cover STEELFLEX application on a silo: BEFORE and AFTER installation Before After Dynatect is a proprietary trademark of Dynatect Manufacturing, Inc Dynatect Manufacturing, Inc. DT15-CC-03A STEELFLEX 09/2015 dynatect Phone: Fax: info@dynatect.de Hallbergmooser Str Schwaig, Germany Oberes Feld Steinhagen, Germany 8