KIT Series. HYUNDAI WIA Gang Type CNC Turning Center

Transcription

1 KIT Series HYUNDAI WIA Gang Type CNC Turning Center

2 Technical Leader The Gang Type CNC Turning Center Kit Series, developed by Hyundai Wia, a Korean manufacturer of traditional machine tools, on the strength of its accumulated knowhow and stateoftheart technology, has a block tool structure and has realized maximum productivity using a highspeed and highperformance mechanism. KIT250 KIT450 [SIEMENS] Swing Over the Bed Max. Turning Length Chuck Size Bar Capacity Spindle Speed Spindle Output Travel (X/Z) No. of Tool inch r/min kw(hp) EA Ø320 (12.6 ) 150 (5.9 ) 5 Ø32 (1.26 ) 7, /3.7 (7.3/5) 250/200 (9.8 /7.9 ) 4 Swing Over the Bed Max. Turning Length Chuck Size Bar Capacity Spindle Speed Spindle Output Travel (X/Z) No. of Tool inch r/min kw(hp) EA Ø530 (30.9 ) 300 (11.8 ) 6 Ø45 (1.8 ) 6,000 [6,000] 15/11 (20/15) [10.8/9 (14.5/12)] 450/300 (17.7 /11.8 ) 6

3 Automation/Process Integration, Easy to Operate Gang Type Lathes KIT Series Variety Accessories, Robot System Application (ex: KN Robot) Variety Optional figures are available, Auto Loader/Bar Feeder/ Parts Catcher etc. Slant bed design gives better access to tool holder, and chuck. Also, this design is more efficient to remove chips. Locate chip box at the front or sides For operator's convenient, multi purpose tool box and used lubrication collect box are equipped KIT250 KIT450

4 01 KIT Series Basic Features The Most Advanced Mechanism, Revolutionized Productivity & High Performance Slant Type Bed (KIT450) It is easy to access to chuck and the effectiveness and convenience of chip treatment have been increased when setting the tools if the 60º tilted bed is applied. 01 Allinone Type of Bed As it has been designed as allinone bed structure, it has excellent in vibration absorption ability and guarantees the high level of processing. In particular, it is able to keep the continuous acceleration as it has been designed in a structure to minimize the heat ransformation occurred uring processing process Main Spindle The highprecision spindle based on the gearless method, utilizing angular contact ball bearings, minimizes thermal deformation even during highspeed revolution, making possible precision processing of the machined surface. LM Guide for Full Axis Noise is minimized during the feed due to the application of an LM Guide. Feed rate is outstanding, which contributes to enhancing productivity. 03 Double Anchored Ball Screw Each axes are designed with a large diameter ballscrew, fixed by double anchors on both ends to provide high rigidity and minimize thermal distortion.

5 Basic Structure 03 HYUNDAI WIA MACHINE TOOL 02 KIT SERIES Gang Type CNC Turning Center Rapid Travel (X/Z axis) 24/30 m/min (KIT250) 30/36 m/min (KIT450) KIT250 Bed Flushing It is able to effectively handle the chip trouble occurred during the processing by attaching the bed flushing unit as a standard. Flat Type Bed When the gang tool is attached to the flat type of bed, it guarantees the high precision of processing.

6 02 KIT Series HighPrecision Spindle Cutting Edge Design & Optimized Cutting Condition Gang Type CNC Turning Center Main Spindle The high level of spindle stock designed in gearless way decreases the temperature rise by adapting the angular contact ball bearing so that there is little heat transformation within the scope of total rotation numbers, and it is possible toperform the precise processing of surface by minimizing the heat transformation even in high rotational speed. Time saving when the spindle stock is stop The maneuver and dwell time has been innovatively saved compared to the existing model by adapting a high performance of AC spindle motor rpm Acceleration/Deceleration Time Other Machine 2.5 sec KIT sec 26% reduction sec

7 Spindle Spindle Output/Torque Diagram HYUNDAI WIA MACHINE TOOL 1PH8 Servo Motor The characteristics of 1PH8 Series Motors include a maximum concentricity of 10μm, unsurpassed quality and a short operating period, which make them stand out as superb machine tools in quality and performance. They operate smoothly in extreme environments such as those of high temperature, dust and dirt. Their design minimizing heat emission makes it possible to maintain a degree of accuracy at all time N. m (S6 60%) 68.7N. m (Cont.) KIT kW (S6 60%) 9kW (Cont.) KIT SERIES Gang Type CNC Turning Center ,500 4,500 6,000 FANUC 48N.m (15min) 24.2N.m (Cont.) ,093 2,000

8 03 KIT Series Gang Type Block Tool High Precision Mechanism Powerful Gang Type CNC Turning Center

9 Block Tool Gang Type Block Tool With maximization of machine running time with the tool selection time saved, the productivity has been improved during production processing process for small sized parts. HYUNDAI WIA MACHINE TOOL KIT SERIES Gang Type CNC Turning Center No. of Tool KIT250 : 4 EA KIT450 : 6 EA Table size KIT250 : 200x500 mm (7.8 x19.7 ) Tool Size (OD/ID) KIT250 : 20 20/Ø25 ( xø1 ) KIT450 : 20 20/Ø32 ( xø1.2 ) Accuracy KIT450 : 200x550 mm (7.8 x21.6 ) Accuracy (Roundness/Roughness) : ±0.45μm / ±0.5 μm Sp. Speed 1,500 min 1 Material AL Nose R of tool Diamond R 0.8 Depth of cut 0.02 mm Feed 0.03 mm/rev. Dia. of work Ø30 mm Constant Cutting Accuracy ±3.5 μm Cutting Condition Material Brass Spindle Speed rpm Depth of cut 1.5 mm Feed 0.3 mm/rev. Coolant Use Dia. of work Ø42 [2 pass cut] Cutting Accuracy (μm) No. of Work (pcs) This data is taken after full warming up operation.

10 04 KIT Series User Convenience Various Devices for User Friendly Bar Feeder System Bar Feeder When machining from bar stock, a bar feeder allows for improved efficiency and unattended machining Long Type Max load processing capa. Shot Type Max load processing capa. Parts Conveyor 3m(118.1 ) Ø42mm(1.7 ) 1.5m(59.1 ) Ø65mm(2.6 ) An optional parts catcher collects finished parts without the need to open the door, adding productivity, especially when a bar feeder is attached Bar Feeder Process Round Bar Material Bar Feeder Machining Parts Catcher Parts Conveyor

11 Optional Gantry Loader System KIT SERIES Gang Type CNC Turning Center HYUNDAI WIA MACHINE TOOL Gantry Loader Machining Process High speed gantry loader and stacker are integrated into the KIT Series creating a flexible and fully automated work cell, with a minimal footprint. The integrated gantry loader design makes the KIT Series perfect for high production applications and lean manufacturing environments Raw Material In Work Stocker 1st Machining Turn Over Finishing Out Work Stocker 2nd Machining

12 Specifications Standard & Optional : Standard : Option : Prior Consultation : Non Application Spindle KIT250 Measurement KIT250 Main Spindle Hollow Chuck 3 Jaw Main Spindle QSetter Work Close Confirmation Device (Only for Special Chuck) TACO SMC Solid Chuck 3 Jaw 6 Standard Soft Jaw (1set) Chuck Clamp Foot Switch 2 Steps Hyd, Pressure Device Linear Scale X/Z Axis Coolant Level Sensor (Only for Chip Conveyor) Environment Air Conditioner Chuck Open/Close Confirmation Device Dehumidifier 2 Steps Chuck Foot Switch Oil Mist Collector Spindle Inside Stopper Oil Skimmer 5 Index CsAxis (0.001 ) Block Tool Tool Holder Boring Sleeve MQL (Minimal Quantity Lubrication) Fixture & Automation Auto Door Auto Shutter (Only for Automatic System) Sub Operation Pannel Drill Socket Bar Feeder Interface UDrill Holder Bar Feeder (FEDEK) UDrill Holder Sleeve Extra MCode 4ea Rotating Tool Head (X,Z Axis) Tail Stock & Steady Rest Manual Tail Stock Coolant & Air Blow Standard Coolant (Nozzle) Automation Interface I/O Extension (IN & OUT) Parts Catcher Parts Conveyor 16Contact 32Contact Main SP. Chuck Coolant (Upper Chuck) Gun Coolant Spindle Thru Coolan t(only for Special Chuck) Chuck Air Blow (Upper Chuck) Air Gun Spindle Thru Air Blow (Only for Special Chuck) Semi Automation System Semi Automation System Hyd. Device Standard Hyd. Cylinder Standard Hyd. Unit S/W Only for Bearing Parts General Turning Hollow 35bar/15l High Pressure Coolant 6Bar Machine Guidance (HWMCG : FANUC) Power Coolant System (For Automation) Tool Monitoring (HWTM : FANUC) Bed Coolant Coolant Chiller Chip Disposal Coolant Tank 115l Chip Conveyor Front (Right) (Hinge/Scraper) Rear (Rear) Special Chip Conveyor (Drum Filter) DNC software (HWeDNC : FANUC) Software for reduction of standby power (HWESS : FANUC) Monitoring of the state of equipment (HWMMS : FANUC) ETC Tool Box Standard (180l) Customized Color Need Munsel No. Chip Box Swing (200l) Large Swing (290l) Large Size (330l) CAD & CAM Costomized Safety Device Door InterLock Total Splash Guard Chuck Pressure Failure Detector Back Spin Torque Limiter (BST) Torque Limiter Electric Device Call Light 1Color : Call Light 3Color : Call Light & Buzzer 3Color : B Work Light Electric Cabinet Light Chuck Open/Close Confirmation Device Remote MPG Spindle Load Meter (LED Type) Spindle RPM Meter (LED Type) Work Counter Digital Total Counter Digital Tool Counter Digital Multi Tool Counter 6ea 9ea ABS Encoder Electric Circuit Breaker AVR (Auto Voltage Regulator) Transformer 15kVA Auto Power Off The specifications as above will only serve as a reference.

13 Specifications Standard & Optional : Standard : Option : Prior Consultation : Non Application Spindle KIT450 Electric Device KIT450 Main Spindle Hollow Chuck 3 Jaw Main Spindle Solid Chuck 3 Jaw Standard Soft Jaw (1set) Chuck Clamp Foot Switch Flash Memory Card Auto Power Off Double Foot Switch BackUp Module For Blackout Measurement QSetter Work Close Confirmation Device TACO (Only for Special Chuck) SMC HYUNDAI WIA MACHINE TOOL 2 Steps Hyd, Pressure Device Linear Scale X/Z Axis Spindle Inside Stopper 5 Index CsAxis (0.001 ) Block Tool Tool Holder Boring Sleeve Drill Socket UDrill Holder UDrill Holder Sleeve Ø32 Boring Holder Rotating Tool Head (X,Z Axis) Tail Stock & Steady Rest Manual Tail Stock Coolant & Air Blow Standard Coolant (Nozzle) Chuck Coolant (Upper Chuck) Coolant Level Sensor (Only for Chip Conveyor) Environment FANUC Air Conditioner SIEMENS Dehumidifier Oil Mist Collector Oil Skimmer (Only for Chip Conveyor) MQL (Minimal Quantity Lubrication) Fixture & Automation Auto Door Auto Shutter (Only for Automatic System) Sub Operation Pannel Bar Feeder Interface Bar Feeder (FEDEK) Extra MCode 4ea Automation Interface KIT SERIES Gang Type CNC Turning Center Gun Coolant Spindle Thru Coolant (Only for Special Chuck) I/O Extension (IN & OUT) 16Contact 32Contact Chuck Air Blow (Upper Chuck) Parts Catcher Main SP. Air Gun Parts Conveyor Spindle Thru Air Blow (Only for Special Chuck) Semi Automation System 6Bar High Pressure Coolant 20Bar Power Coolant System (For Automation) Coolant Chiller Chip Disposal 100l Coolant Tank 130l Chip Conveyor Front (Right) (Hinge/Scraper) Rear (Rear) Special Chip Conveyor (Drum Filter) Hyd. Device Standard Hyd. Cylinder Hollow 35bar/10l Standard Hyd. Unit 35bar/15l S/W Machine Guidance (HWMCG : FANUC) Tool Monitoring (HWTM : FANUC) DNC software (HWeDNC : FANUC) Software for reduction of standby power (HWESS : FANUC) Chip Box Standard (180l) Swing (200l) Large Swing (290l) Large Size (330l) Monitoring of the state of equipment (HWMMS : FANUC) ETC Tool Box Costomized Customized Color Need Munsel No. Safety Device Door InterLock CAD & CAM Software Total Splash Guard Chuck Pressure Failure Detector Torque Limiter Back Spin Torque Limiter (BST) Electric Device Call Light 1Color : Call Light 3Color : Call Light & Buzzer 3Color : B Work Light Electric Cabinet Light Chuck Open / Close Confirmation Device Controller FANUC SIEMENS Remote MPG Sp. Load Meter FANUC (Mounted Type) (LED Type) Sp. RPM Meter (LED Type) Work Counter SIEMENS (Builtin Type) FANUC (Mounted Type) SIEMENS (Builtin Type) Digital Total Counter Digital Tool Counter Digital Multi Tool Counter 6ea 9ea Electric Circuit Breaker ABS Encoder AVR (Auto Voltage Regulator) Transformer 20kVA The specifications as above will only serve as a reference.

14 Specifications External Dimensions unit : KIT (16.9) 682 (26.9) 540 (21.3) 468 (18.4) 749 (29.5) 581 (22.9) 425 (16.7) 807 (31.8) 458 (18) 1690 (66.5) 550 (21.7) SP. CENTER CHIP CONVEYOR, REAR (OPTION) 744 (29.3) 376 (14.8) 126 (5) TOOL TABLE 460 (18.1) 85 (3.3) 1005 (39.6) 400 (15.7) 565 (22.2) 577 (22.7) 765 (30.1) 1000 (39.4) 255 (10) 1532 (60.3) 108 (4.3) 상부유압공급장치부착시높이 HS4000, 4000i, 5000, 5000i, : 3,100mm, HS4000M : 3,350mm

15 Specifications External Dimensions unit : KIT (11.5) 2040 (80.3) 1147 (45.2) 550 (21.7) 564 (22.2) 635 (25) HYUNDAI WIA MACHINE TOOL 755 (29.7) 895 (35.2) 876 (34.5) 770 (30.3) 1000 (39.4) KIT SERIES Gang Type CNC Turning Center 70 (2.7) 486 (19.1) 385 (15.1) 1169 (46) 1036 (40.8) 1435 (56.5) 450 (17.7) 635 (25) 350 (13.8) 151 (5.9) (39.4) 770 (30.3) SP. CENTER 1060 (41.7) 1650 (65) 755 (29.7) 895 (35.2)

16 Specifications Tooling Travel Range unit : KIT250 Copying Bite OD Holder (R&L) Threading Grooving OD Holder Boring Bar Socket ID Holder Drill Tooling Parts Detail ITEM KIT250 Right/Left ( 20 ) 1 Left ( 20 ) Turning Holder O.D.Tool Holder Double ( 20 ) 1 Right/Left ( 25 ) Double OD ( 25 ) I.D. Tool Holder Single Ø32 (1 1/4 ) 1 Turning Holder UDrill Tool Holder Tool Holder Cap Ø8 (5/16 ) 1 Ø10 (3/8 ) 1 Boring Ø12 (1/2 ) Ø16 (5/8 ) 1 Socket Ø20 (3/4 ) Ø25 (1 ) Drill MT 1 MT 2 MT UDrill Ø20 (3/4 ) Ø25 (1 ) Specifications are subject to change for improvement without notice.

17 Specifications Tooling Travel Range unit : KIT450 HYUNDAI WIA MACHINE TOOL Copying Threading Boring Bar Bite Grooving OD Holder (R&L) OD Holder (R) KIT SERIES Gang Type CNC Turning Center Socket ID Holder Drill UDrill Holder UDrill Socket UDrill Tooling Parts Detail ITEM KIT450 Right/Left ( 20 ) 2 Left ( 20 ) Turning Holder O.D.Tool Holder Double ( 20 ) 1 Right/Left ( 25 ) Opt Double OD ( 25 ) Opt I.D. Tool Holder Single Ø32 (1 1/4 ) 2 Turning Holder UDrill Tool Holder Tool Holder Cap Opt Opt Ø8 (5/16 ) Opt Ø10 (3/8 ) 1 Boring Ø12 (1/2 ) Ø16 (5/8 ) 1 1 Socket Ø20 (3/4 ) Ø25 (1 ) Opt Opt Drill MT 1 MT 2 MT 2 1 Opt UDrill Ø20 (3/4 ) Ø25 (1 ) Opt Opt Specifications are subject to change for improvement without notice.

18 Specifications The Stroke of Table unit : KIT250

19 Specifications The Stroke of Table unit : KIT450 HYUNDAI WIA MACHINE TOOL 3 (0.1) XSTROKE KIT SERIES Gang Type CNC Turning Center

20 Specifications Specifications [ ] : Option ITEM KIT250 Swing Over the Bed Ø320 (12.6 ) CAPACITY Max. Turning Dia. Max. Turning Length Ø135 (5.3 ) 150 (5.9 ) Bar Capacity Ø32 (1.3 ) Chuck Size Ø135 (5.3 ) Spindle Bore Ø42 (1.7 ) Spindle Speed (rpm) r/min 7,000 Spindle Motor (Max/Cont.) kw(hp) 5.5/3.7 (7.4/5) Torque (Max/Cont.) N. m(lbf.ft) 48/32.4 (35.4/23.9) Spindle Type BELT Spindle Nose FLAT Ø110 (4.3 ) Travel (X/Z) 250/200 (9.8 /7.9 ) Feed Rapid Travel (X/Z) m/min 24/30 Slide Type LM GUIDE Block Tool No. of Tool Tool Size OD ID EA 4 20 ( 0.8 ) Ø25 (1 ) tank Capacity Coolant Tank Lubricating Tank l(gal) l(gal) 115 (30.4) 1.8 (0.5) power Supply Electric Power Supply Thickness of Power Cable Voltage kva Sq V/Hz 8 OVER /60 (200/50) Floor Space (L W) 1,690x1,640 (66.5 x64.6 ) Machine Height 1,670 (65.7 ) Weight kg(lb) 1,900 (4,189) NC Controller HYUNDAI WIA FANUC i Series Specifications are subject to change for improvement without notice.

21 Specifications Specifications [ ] : Option ITEM KIT450 CAPACITY Swing Over the Bed Max. Turning Dia. Max. Turning Length Bar Capacity Ø530 (20.9 ) Ø170 (6.7 ) 300 (11.8 ) Ø45 (1.8 ) HYUNDAI WIA MACHINE TOOL Chuck Size Ø169 (6.7 ) Spindle Feed Block Tool Spindle Bore Spindle Speed (rpm) Motor (Max/Cont.) Torque (Max/Cont.) Spindle Type Spindle Nose Travel (X/Z) Rapid Travel (X/Z) Slide Type No. of Tool Tool Size OD ID r/min kw(hp) N. m(lbf.ft) m/min EA Ø53 (2.1 ) 6,000 [6,000] 15/11 (20/15) [10.8/9 (14.5/12)] 95.5/70 (70.4/51.6) [75.6/68.7 (55.7/50.6)] BELT A25 450/300 (17.7 /11.8 ) 30/36 LM GUIDE 6 20 ( 0.8 ) Ø32 (1.3 ) KIT SERIES Gang Type CNC Turning Center tank Capacity power Supply Coolant Tank Lubricating Tank Electric Power Supply Thickness of Power Cable Voltage l(gal) l(gal) kva Sq V/Hz 100 (26.4) 1.8 (0.5) 17 OVER /60 (200/50) Floor Space (L W) 2,110x1,586 (83.1 x62.4 ) Machine Height 1,830 (72 ) Weight kg(lb) 2,700 (5,952) NC Controller HYUNDAI WIA FANUC i Series [SIEMENS 828D BASIC] Specifications are subject to change for improvement without notice.

22 Specifications SIEMENS 828D BASIC (KIT450) Control function Max. configuration of axes Max. configuration of axes and sp. Least Command/input Feed function Feedrate Override Rapid Traverse Override Acceleration with jerk limitation Programmable acceleration Followup mode Measuring system 1 and 2, selectable Separate path feed for corners and chamfers Travel to fixed stop Spindle function Spindle Override Spindle Orientation Spindle Speed Limitation Rigid Tapping Interpolation function Linear interpolation axes Circle via center point and end point Circle via interpolation point Helical interpolation Universal interpolator NURBS (nonuniform rational B splines) Continuouspath mode with programmable rounding clearance Tool function Tool Radius Comp. Zero Offset (G54, G55, G56, G57,G58, G59) Programmable Zero Offset Tool management Display CRT / MDI SCREEN SAVER Manual Operation Manual Handle/Jog Feed Reposition Reference Approach Spindle Control Auto Operation Single Block Feed Hold Optional Block Skip Machine Lock Dry Run Simulation Diagnosis function Alarm Display Spindle Load/rpm Meter PLC status/lad display Program function Part Program Storage Length Program Name Subroutine Call Absolute/incremental Command Scaling, ROT Inch / Metric Conversion Conversational Cycle Program Block Search Variable Program (Macro) Read / Write System Variable BackGround Editing Miscellaneous Functions Lable Skip Program Stop/End Lookahead, Jerk LimitationFeed &forward control ISO Dialect Interpreter(G291) (Fanuc Program exe) Maximum number of tools/cuttings Number of levels for skip blocks 1 3 Axis 4 Axis mm / inch 0 120% F1, 5, 25/50, 100% 50% 120% Max. 4 axis 50 EA 8.4 Color LCD Ref 1, 2 Approach Start, Stop, Rev, Jog, Ort. (2 dimensional) 1MB 23 digit (7 level) G90 G91 (22 Machine) M Code M00, M01, M02, M30 80/160 Protection Function Emergency Stop Over Travel Contour Monitoring Program Protection Automation Support Fun. Actual Speed Display(Monitor) Tool Life Management Work Count Function Language Function Two Language switchable Data Transfer RS 232C I/F / Ethernet USB Memory Stick & CF Card Option Shop Turn 3D Simulation DRF offset Teach in Number of levels for skip blocks 8 TRACYL (Cylinder interpolation) TRANSMIT (Pole coordinate command) Sister Tool A,B,C SPLINE INTERPOLATION RCS HOST (Remote Control) Simultaneous Recording (real time monitoring) Analysis of Internal Drive Values Network Drive Management HWTM Soft Limit & Hard O.T (Time, Parts) (Internal) Chinese Traditional, Czech, Danish, Dutch, Finnish, Hungarian, Japanese, Korean, Polish, Russian, Swedish, Portuguese, Turkish Figures in inch are converted from metric values. Design and specifications subject to change without notice.

23 Controller HYUNDAI WIA FANUC i Series Control function / Screen display Control axis number Simultaneous control axis number Min. input unit Min. increment High speed HRV control Inch/metric conversion Interlock Machinelock Emergency stop Stroke check 1 Stroke check 2 Stroke check 3 Follow up Sub off Backlash compensation Position switch Fault load detection High resolution transfer control (HRM) LCD / MDI Operation Auto handling (memory) MDI handling Search function Program restart Preventive function for mishandling Buffer registration Program check function Single block Feed function Manual jog feed Manual Handle Scale Feed command Feed override Jog override Rapid transfer override Override release Transfer/minute, transfer/rpm Program input and interpolation function Nano interpolation Dwell function Threading retract Variable lead threading Return of first zero point Return check of zero point Return of second zero point Program stop/over Tape code Optional block skip Max. program enter unit Program number Absolute, incremental programming Decimal number entering Plain selection Work coordinate selection Manual absolute Drawing dimension direct input programming G code system Programmable data input Sub program call Custom macro B Custom macro variable addition Multiple repetitive cycles Multiple repetitive cycles Ⅱ Lathe fixed cycle Manual guide i Max. 4 axes X, Z axis X, Z, C axis (M type machine) 2 axis/straight, arc interpolation (Max. 4 axes) X, Z axis : 0.001mm ( ) C axis : deg. X, Z axis : 0.001mm ( ) C axis : deg. G20 / G21 Each axis / All axis Full axis Overtravel +/ 0~9999 Pulse (Rapid traverse & cutting feed) Back spin torque limiter (BST) 8.4 Color LCD Sequence, Program Dry run, Program check Rapid transfer, Jog, Handle x1, x10, x100 Direct command for F code feed 0~200% (10% units) 0~2,000 mm/min [79 ipm] F1, F5, F25 / F50, F100% Positioning/Straight/Arc (G00/G01/G02/G03) G04, 0~ sec G28, Manual G27 G30 M00, M01 / M02, M30 EIA / ISO 1 EA +/ O+4 digit number G17, G18, G19 G52 to G59 ON Fixed Included chamfering / Corner R` A/B/C G10 10 Steps #100 to #199, #500 to #999 Interactive program Sub / Main spindle function MCode function M4 digit number MCode function lock Lock sp. speed command S + 4 digit number, binary number output Main sp. constant control G96, G97 Spindle speed override 50% ~ 150% (10% unit) Spindle position decision Rigid tapping Tool function / Tool compensation Tool function T2 + 2 Tool offset quantity 64 pairs Tool offset Tool nose radius compensation G40, G41, G42 Configuration/wear compensation Direct input of measuring tool compensation B Tool life management Data input, output and editing function Input/output interface RS232C, Memory Card Memory card input and output Program storing capacity 512 Kbyte Program registration quantity Max 500 programs Memory lock Background edit Additional expandable edit NC program copy, move, change Screen, diagnosis and setting function Self diagnosis function Historic screen Alarm and handling screen Help function Outside message Operation time/counter display Actual sp. speed, T code display Actual machining feed rate display Handling monitor screen Rod meter light Graphic screen Spindle/servo setting screen Languages LCD screen save Screen saver Auto data backup Function according with machine specification Cs contouring function Turn mill Stored pitch error compensation Turn mill Pole coordinate command Turn mill Cylinder interpolation Turn mill Drill fixed cycle Turn mill Sp. positioning expandable Turn mill Option High speed Ethernet Optional block skip 3rd & 4th reference point return Program storing capacity Data server Polygon turning Hellical interpolation Dynamic graphic display 8 level data protection function Tool load monitoring function Manual guide i 100 Mbps (Option board is required) 9 EA 512 Kbyte 1GB HWTM (embedded Fanuc type) Interactive program (10.4 Color LCD) HYUNDAI WIA MACHINE TOOL KIT SERIES Gang Type CNC Turning Center Figures in inch are converted from metric values. Design and specifications subject to change without notice.

24 Global Network

25 Head Office & Factory Changwon Office 153, Jeongdongro, Seongsangu, Changwonsi, Gyeongsangnamdo, Korea (Zip Code : ) TEL : FAX : HYUNDAI WIA MACHINE TOOL OVERSEAS OFFICES HYUNDAI WIA America 265, Spring Lake Drive, Itasca, IL, TEL : FAX : L.A Office Knott Ave, STE B/C, Cypress, CA 90630, U.S.A TEL : FAX : America Technical Center Country Club Drive Suite C9, Farmington Hills, MI TEL : FAX : HYUNDAIKIA EUROPE GmbH Kaiserleipromenade 5, D63067 Offenbach, Germany TEL : FAX : Raunheim Service Center Frankfurter Str. 63, Raunheim, Germany TEL : FAX : Uiwang Office 37, Cheoldobangmulgwanro, Uiwangsi, Gyeonggido, Korea (Zip Code : ) TEL : Fax : Jiangsu HYUNDAI WIA CHINA Chengdu Office Company No.6 Fenghuang Road, Room 2103, Block A, Times Plaza, No.2 Fenghuang Town, Zhangjjagang City, Zongfu Road, Jinjiang District, Chengdu, Jiangsu province, China China TEL : TEL : FAX : FAX : Shandong HYUNDAI WIA CHINA Wuhan Office Company No.188 Shanghai Road, Room 302, B tower, Donghe Center, Rizhao City, Shandong Province, China Dongfeng three road, Zhuankou, TEL : /5910 Wuhan, Hubei, China FAX : /9199 TEL : ~7 FAX : China Sales Company 13F, Bldg6, No.1535 Hongmei Road, CHINA Qingdao Office Xuhui District, Shanghai, China, Room 1207, ZhaoYin Building, 36 TEL : HongKong Middle Road, Qingdao , FAX : PR China TEL : ~5 CHINA Beiging Office FAX : Room 908, Hyundai Motor Building, No.38 Xiaoyun Road, Chaoyang District, Beijing, CHINA SHENYANG Office China Room 1304, NO.53 Beizhan Road, Shenhe TEL : ~2 District, Shenyang, China FAX : TEL : FAX : CHINA Guangzhou Office Room 609, No.1 Yingbin Building 1# HYUNDAI WIA INDIA Yingbin Blvd (Dashi Section) Panyu 48, Sur. No7808. Kandamangalam Village, District Guangzhou Ctiy, Guangdong, Sengadu Post, Sriperumbudur Taluk, China Kancheepuram, Tamilnadu , India TEL : ~6, TEL : FAX : FAX : KIT SERIES Gang Type CNC Turning Center

26 ENG Head Office & Factory 153, Jeongdongro, Seongsangu, Changwonsi, Gyeongsangnamdo Tel , 9299 Fax Overseas Sales Team 16F, 37, Cheoldobangmulgwanro, Uiwangsi, Gyeonggido Tel